ENGR00288418 Add EPDC splash screen for MX 6DL SabreSD and 6SL EVK

Add EPDC splash screen feature for MX6SL EVK, and MX6DL SABRESD board.

- Currently, splash screen consists of a simple black border
  around a white screen.  Done this way to save in memory footprint.

- EPDC splash screen is disabled by default in the config file for MX6DL_SABRESD
  and MX6SL_EVK.  If left enabled, the U-Boot image will not boot correctly
  (hang), since some additional content on the boot device (waveform file) is
  required for EPDC splash to work correctly.

Please refer to Linux Reference Manual for how to flash WAVEFORM file.

Signed-off-by: Robby Cai <R63905@freescale.com>

10 files changed, 1737 insertions, 0 deletions

diff --git a/arch/arm/include/asm/arch-mx6/imx-regs.h b/arch/arm/include/asm/arch-mx6/imx-regs.h
index 3b3fc95..344fc0e 100644
--- a/arch/arm/include/asm/arch-mx6/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx6/imx-regs.h
@@ -173,6 +173,7 @@
 #define DCIC2_BASE_ADDR             (AIPS1_OFF_BASE_ADDR + 0x68000)
 #define DMA_REQ_PORT_HOST_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x6C000)
 #endif
+#define EPDC_BASE_ADDR              (AIPS1_OFF_BASE_ADDR + 0x74000)
 
 #define AIPS2_ON_BASE_ADDR          (ATZ2_BASE_ADDR + 0x7C000)
 #define AIPS2_OFF_BASE_ADDR         (ATZ2_BASE_ADDR + 0x80000)
@@ -493,6 +494,8 @@ struct cspi_regs {
 #define CLKCTL_CCGR7            0x84
 #define CLKCTL_CMEOR            0x88
 
+#define ANATOP_PLL_VIDEO        0xA0
+
 struct iim_regs {
 	u32	ctrl;
 	u32	ctrl_set;
diff --git a/arch/arm/include/asm/arch-mx6/mx6sl_pins.h b/arch/arm/include/asm/arch-mx6/mx6sl_pins.h
index cdfeb5f..df8f04d 100644
--- a/arch/arm/include/asm/arch-mx6/mx6sl_pins.h
+++ b/arch/arm/include/asm/arch-mx6/mx6sl_pins.h
@@ -38,5 +38,50 @@ enum {
 	MX6_PAD_I2C1_SDA__GPIO_3_13				= IOMUX_PAD(0x0450, 0x0160, 5, 0x0000, 0, 0),
 	MX6_PAD_I2C1_SCL__I2C1_SCL				= IOMUX_PAD(0x044C, 0x015C, 0x10, 0x071C, 2, 0),
 	MX6_PAD_I2C1_SCL__GPIO_3_12				= IOMUX_PAD(0x044C, 0x015C, 5, 0x0000, 0, 0),
+
+	MX6_PAD_EPDC_PWRSTAT__GPIO_2_13				= IOMUX_PAD(0x03E8, 0x00F8, 5, 0x0000, 0, 0),
+	MX6_PAD_EPDC_VCOM0__GPIO_2_3				= IOMUX_PAD(0x0410, 0x0120, 5, 0x0000, 0, 0),
+	MX6_PAD_EPDC_PWRWAKEUP__GPIO_2_14			= IOMUX_PAD(0x03EC, 0x00FC, 5, 0x0000, 0, 0),
+	MX6_PAD_EPDC_PWRCTRL0__GPIO_2_7				= IOMUX_PAD(0x03D4, 0x00E4, 5, 0x0000, 0, 0),
+	MX6_PAD_EPDC_D0__EPDC_SDDO_0				= IOMUX_PAD(0x0380, 0x0090, 0, 0x0000, 0, 0),
+	MX6_PAD_EPDC_D1__EPDC_SDDO_1				= IOMUX_PAD(0x0384, 0x0094, 0, 0x0000, 0, 0),
+	MX6_PAD_EPDC_D2__EPDC_SDDO_2				= IOMUX_PAD(0x03A0, 0x00B0, 0, 0x0000, 0, 0),
+	MX6_PAD_EPDC_D3__EPDC_SDDO_3				= IOMUX_PAD(0x03A4, 0x00B4, 0, 0x0000, 0, 0),
+	MX6_PAD_EPDC_D4__EPDC_SDDO_4				= IOMUX_PAD(0x03A8, 0x00B8, 0, 0x0000, 0, 0),
+	MX6_PAD_EPDC_D5__EPDC_SDDO_5				= IOMUX_PAD(0x03AC, 0x00BC, 0, 0x0000, 0, 0),
+	MX6_PAD_EPDC_D6__EPDC_SDDO_6				= IOMUX_PAD(0x03B0, 0x00C0, 0, 0x0000, 0, 0),
+	MX6_PAD_EPDC_D7__EPDC_SDDO_7				= IOMUX_PAD(0x03B4, 0x00C4, 0, 0x0000, 0, 0),
+	MX6_PAD_EPDC_GDCLK__EPDC_GDCLK				= IOMUX_PAD(0x03C0, 0x00D0, 0, 0x0000, 0, 0),
+	MX6_PAD_EPDC_GDSP__EPDC_GDSP				= IOMUX_PAD(0x03CC, 0x00DC, 0, 0x0000, 0, 0),
+	MX6_PAD_EPDC_GDOE__EPDC_GDOE				= IOMUX_PAD(0x03C4, 0x00D4, 0, 0x0000, 0, 0),
+	MX6_PAD_EPDC_GDRL__EPDC_GDRL				= IOMUX_PAD(0x03C8, 0x00D8, 0, 0x0000, 0, 0),
+	MX6_PAD_EPDC_SDCLK__EPDC_SDCLK				= IOMUX_PAD(0x0400, 0x0110, 0, 0x0000, 0, 0),
+	MX6_PAD_EPDC_SDOE__EPDC_SDOE				= IOMUX_PAD(0x0408, 0x0118, 0, 0x0000, 0, 0),
+	MX6_PAD_EPDC_SDLE__EPDC_SDLE				= IOMUX_PAD(0x0404, 0x0114, 0, 0x0000, 0, 0),
+	MX6_PAD_EPDC_SDSHR__EPDC_SDSHR				= IOMUX_PAD(0x040C, 0x011C, 0, 0x0000, 0, 0),
+	MX6_PAD_EPDC_BDR0__EPDC_BDR_0				= IOMUX_PAD(0x0378, 0x0088, 0, 0x0000, 0, 0),
+	MX6_PAD_EPDC_SDCE0__EPDC_SDCE_0				= IOMUX_PAD(0x03F0, 0x0100, 0, 0x0000, 0, 0),
+	MX6_PAD_EPDC_SDCE1__EPDC_SDCE_1				= IOMUX_PAD(0x03F4, 0x0104, 0, 0x0000, 0, 0),
+	MX6_PAD_EPDC_SDCE2__EPDC_SDCE_2				= IOMUX_PAD(0x03F8, 0x0108, 0, 0x0000, 0, 0),
+	MX6_PAD_EPDC_D0__GPIO_1_7				= IOMUX_PAD(0x0380, 0x0090, 5, 0x0000, 0, 0),
+	MX6_PAD_EPDC_D1__GPIO_1_8				= IOMUX_PAD(0x0384, 0x0094, 5, 0x0000, 0, 0),
+	MX6_PAD_EPDC_D2__GPIO_1_9				= IOMUX_PAD(0x03A0, 0x00B0, 5, 0x0000, 0, 0),
+	MX6_PAD_EPDC_D3__GPIO_1_10				= IOMUX_PAD(0x03A4, 0x00B4, 5, 0x0000, 0, 0),
+	MX6_PAD_EPDC_D4__GPIO_1_11				= IOMUX_PAD(0x03A8, 0x00B8, 5, 0x0000, 0, 0),
+	MX6_PAD_EPDC_D5__GPIO_1_12				= IOMUX_PAD(0x03AC, 0x00BC, 5, 0x0000, 0, 0),
+	MX6_PAD_EPDC_D6__GPIO_1_13				= IOMUX_PAD(0x03B0, 0x00C0, 5, 0x0000, 0, 0),
+	MX6_PAD_EPDC_D7__GPIO_1_14				= IOMUX_PAD(0x03B4, 0x00C4, 5, 0x0000, 0, 0),
+	MX6_PAD_EPDC_GDCLK__GPIO_1_31				= IOMUX_PAD(0x03C0, 0x00D0, 5, 0x0000, 0, 0),
+	MX6_PAD_EPDC_GDSP__GPIO_2_2				= IOMUX_PAD(0x03CC, 0x00DC, 5, 0x0000, 0, 0),
+	MX6_PAD_EPDC_GDOE__GPIO_2_0				= IOMUX_PAD(0x03C4, 0x00D4, 5, 0x0000, 0, 0),
+	MX6_PAD_EPDC_GDRL__GPIO_2_1				= IOMUX_PAD(0x03C8, 0x00D8, 5, 0x0000, 0, 0),
+	MX6_PAD_EPDC_SDCLK__GPIO_1_23				= IOMUX_PAD(0x0400, 0x0110, 5, 0x0000, 0, 0),
+	MX6_PAD_EPDC_SDOE__GPIO_1_25				= IOMUX_PAD(0x0408, 0x0118, 5, 0x0000, 0, 0),
+	MX6_PAD_EPDC_SDLE__GPIO_1_24				= IOMUX_PAD(0x0404, 0x0114, 5, 0x0000, 0, 0),
+	MX6_PAD_EPDC_SDSHR__GPIO_1_26				= IOMUX_PAD(0x040C, 0x011C, 5, 0x0000, 0, 0),
+	MX6_PAD_EPDC_BDR0__GPIO_2_5				= IOMUX_PAD(0x0378, 0x0088, 5, 0x0000, 0, 0),
+	MX6_PAD_EPDC_SDCE0__GPIO_1_27				= IOMUX_PAD(0x03F0, 0x0100, 5, 0x0000, 0, 0),
+	MX6_PAD_EPDC_SDCE1__GPIO_1_28				= IOMUX_PAD(0x03F4, 0x0104, 5, 0x0000, 0, 0),
+	MX6_PAD_EPDC_SDCE2__GPIO_1_29				= IOMUX_PAD(0x03F8, 0x0108, 5, 0x0000, 0, 0),
 };
 #endif	/* __ASM_ARCH_MX6_MX6SL_PINS_H__ */
diff --git a/board/freescale/mx6qsabresd/mx6qsabresd.c b/board/freescale/mx6qsabresd/mx6qsabresd.c
index aa53541..8617228 100644
--- a/board/freescale/mx6qsabresd/mx6qsabresd.c
+++ b/board/freescale/mx6qsabresd/mx6qsabresd.c
@@ -38,6 +38,11 @@
 #include <miiphy.h>
 #include <netdev.h>
 
+#if defined(CONFIG_MXC_EPDC)
+#include <lcd.h>
+#include <mxc_epdc_fb.h>
+#endif
+
 DECLARE_GLOBAL_DATA_PTR;
 
 #define UART_PAD_CTRL  (PAD_CTL_PKE | PAD_CTL_PUE |            \
@@ -61,6 +66,9 @@ DECLARE_GLOBAL_DATA_PTR;
 	PAD_CTL_DSE_40ohm | PAD_CTL_HYS |			\
 	PAD_CTL_ODE | PAD_CTL_SRE_FAST)
 
+#define EPDC_PAD_CTRL    (PAD_CTL_PKE | PAD_CTL_SPEED_MED |	\
+	PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
+
 #if CONFIG_I2C_MXC
 #define PC MUX_PAD_CTRL(I2C_PAD_CTRL)
 /* I2C2 Camera, MIPI, pfuze */
@@ -177,6 +185,52 @@ iomux_v3_cfg_t const usdhc4_pads[] = {
 	MX6_PAD_SD4_DAT7__USDHC4_DAT7 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 };
 
+static iomux_v3_cfg_t const epdc_enable_pads[] = {
+	MX6_PAD_EIM_A16__EPDC_SDDO_0	| MUX_PAD_CTRL(EPDC_PAD_CTRL),
+	MX6_PAD_EIM_DA10__EPDC_SDDO_1	| MUX_PAD_CTRL(EPDC_PAD_CTRL),
+	MX6_PAD_EIM_DA12__EPDC_SDDO_2	| MUX_PAD_CTRL(EPDC_PAD_CTRL),
+	MX6_PAD_EIM_DA11__EPDC_SDDO_3	| MUX_PAD_CTRL(EPDC_PAD_CTRL),
+	MX6_PAD_EIM_LBA__EPDC_SDDO_4	| MUX_PAD_CTRL(EPDC_PAD_CTRL),
+	MX6_PAD_EIM_EB2__EPDC_SDDO_5	| MUX_PAD_CTRL(EPDC_PAD_CTRL),
+	MX6_PAD_EIM_CS0__EPDC_SDDO_6	| MUX_PAD_CTRL(EPDC_PAD_CTRL),
+	MX6_PAD_EIM_RW__EPDC_SDDO_7	| MUX_PAD_CTRL(EPDC_PAD_CTRL),
+	MX6_PAD_EIM_A21__EPDC_GDCLK	| MUX_PAD_CTRL(EPDC_PAD_CTRL),
+	MX6_PAD_EIM_A22__EPDC_GDSP	| MUX_PAD_CTRL(EPDC_PAD_CTRL),
+	MX6_PAD_EIM_A23__EPDC_GDOE	| MUX_PAD_CTRL(EPDC_PAD_CTRL),
+	MX6_PAD_EIM_A24__EPDC_GDRL	| MUX_PAD_CTRL(EPDC_PAD_CTRL),
+	MX6_PAD_EIM_D31__EPDC_SDCLK	| MUX_PAD_CTRL(EPDC_PAD_CTRL),
+	MX6_PAD_EIM_D27__EPDC_SDOE	| MUX_PAD_CTRL(EPDC_PAD_CTRL),
+	MX6_PAD_EIM_DA1__EPDC_SDLE	| MUX_PAD_CTRL(EPDC_PAD_CTRL),
+	MX6_PAD_EIM_EB1__EPDC_SDSHR	| MUX_PAD_CTRL(EPDC_PAD_CTRL),
+	MX6_PAD_EIM_DA2__EPDC_BDR_0	| MUX_PAD_CTRL(EPDC_PAD_CTRL),
+	MX6_PAD_EIM_DA4__EPDC_SDCE_0	| MUX_PAD_CTRL(EPDC_PAD_CTRL),
+	MX6_PAD_EIM_DA5__EPDC_SDCE_1	| MUX_PAD_CTRL(EPDC_PAD_CTRL),
+	MX6_PAD_EIM_DA6__EPDC_SDCE_2	| MUX_PAD_CTRL(EPDC_PAD_CTRL),
+};
+
+static iomux_v3_cfg_t const epdc_disable_pads[] = {
+	MX6_PAD_EIM_A16__GPIO_2_22,
+	MX6_PAD_EIM_DA10__GPIO_3_10,
+	MX6_PAD_EIM_DA12__GPIO_3_12,
+	MX6_PAD_EIM_DA11__GPIO_3_11,
+	MX6_PAD_EIM_LBA__GPIO_2_27,
+	MX6_PAD_EIM_EB2__GPIO_2_30,
+	MX6_PAD_EIM_CS0__GPIO_2_23,
+	MX6_PAD_EIM_RW__GPIO_2_26,
+	MX6_PAD_EIM_A21__GPIO_2_17,
+	MX6_PAD_EIM_A22__GPIO_2_16,
+	MX6_PAD_EIM_A23__GPIO_6_6,
+	MX6_PAD_EIM_A24__GPIO_5_4,
+	MX6_PAD_EIM_D31__GPIO_3_31,
+	MX6_PAD_EIM_D27__GPIO_3_27,
+	MX6_PAD_EIM_DA1__GPIO_3_1,
+	MX6_PAD_EIM_EB1__GPIO_2_29,
+	MX6_PAD_EIM_DA2__GPIO_3_2,
+	MX6_PAD_EIM_DA4__GPIO_3_4,
+	MX6_PAD_EIM_DA5__GPIO_3_5,
+	MX6_PAD_EIM_DA6__GPIO_3_6,
+};
+
 static void setup_iomux_uart(void)
 {
 	imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads));
@@ -434,6 +488,272 @@ int board_mmc_init(bd_t *bis)
 }
 #endif
 
+#ifdef CONFIG_MXC_EPDC
+#ifdef CONFIG_SPLASH_SCREEN
+extern int mmc_get_env_devno(void);
+int setup_splash_img(void)
+{
+#ifdef CONFIG_SPLASH_IS_IN_MMC
+	int mmc_dev = mmc_get_env_devno();
+	ulong offset = CONFIG_SPLASH_IMG_OFFSET;
+	ulong size = CONFIG_SPLASH_IMG_SIZE;
+	ulong addr = 0;
+	char *s = NULL;
+	struct mmc *mmc = find_mmc_device(mmc_dev);
+	uint blk_start, blk_cnt, n;
+
+	s = getenv("splashimage");
+
+	if (NULL == s) {
+		puts("env splashimage not found!\n");
+		return -1;
+	}
+	addr = simple_strtoul(s, NULL, 16);
+
+	if (!mmc) {
+		printf("MMC Device %d not found\n", mmc_dev);
+		return -1;
+	}
+
+	if (mmc_init(mmc)) {
+		puts("MMC init failed\n");
+		return -1;
+	}
+
+	blk_start = ALIGN(offset, mmc->read_bl_len) / mmc->read_bl_len;
+	blk_cnt   = ALIGN(size, mmc->read_bl_len) / mmc->read_bl_len;
+	n = mmc->block_dev.block_read(mmc_dev, blk_start,
+					blk_cnt, (u_char *)addr);
+	flush_cache((ulong)addr, blk_cnt * mmc->read_bl_len);
+
+	return (n == blk_cnt) ? 0 : -1;
+#endif
+
+	return 0;
+}
+#endif
+
+vidinfo_t panel_info = {
+	.vl_refresh = 85,
+	.vl_col = 800,
+	.vl_row = 600,
+	.vl_pixclock = 26666667,
+	.vl_left_margin = 8,
+	.vl_right_margin = 100,
+	.vl_upper_margin = 4,
+	.vl_lower_margin = 8,
+	.vl_hsync = 4,
+	.vl_vsync = 1,
+	.vl_sync = 0,
+	.vl_mode = 0,
+	.vl_flag = 0,
+	.vl_bpix = 3,
+	.cmap = 0,
+};
+
+struct epdc_timing_params panel_timings = {
+	.vscan_holdoff = 4,
+	.sdoed_width = 10,
+	.sdoed_delay = 20,
+	.sdoez_width = 10,
+	.sdoez_delay = 20,
+	.gdclk_hp_offs = 419,
+	.gdsp_offs = 20,
+	.gdoe_offs = 0,
+	.gdclk_offs = 5,
+	.num_ce = 1,
+};
+
+static void setup_epdc_power(void)
+{
+	/* Setup epdc voltage */
+
+	/* EIM_A17 - GPIO2[21] for PWR_GOOD status */
+	imx_iomux_v3_setup_pad(MX6_PAD_EIM_A17__GPIO_2_21 |
+				MUX_PAD_CTRL(EPDC_PAD_CTRL));
+	/* Set as input */
+	gpio_direction_input(IMX_GPIO_NR(2, 21));
+
+	/* EIM_D17 - GPIO3[17] for VCOM control */
+	imx_iomux_v3_setup_pad(MX6_PAD_EIM_D17__GPIO_3_17 |
+				MUX_PAD_CTRL(EPDC_PAD_CTRL));
+
+	/* Set as output */
+	gpio_direction_output(IMX_GPIO_NR(3, 17), 1);
+
+	/* EIM_D20 - GPIO3[20] for EPD PMIC WAKEUP */
+	imx_iomux_v3_setup_pad(MX6_PAD_EIM_D20__GPIO_3_20 |
+				MUX_PAD_CTRL(EPDC_PAD_CTRL));
+	/* Set as output */
+	gpio_direction_output(IMX_GPIO_NR(3, 20), 1);
+
+	/* EIM_A18 - GPIO2[20] for EPD PWR CTL0 */
+	imx_iomux_v3_setup_pad(MX6_PAD_EIM_A18__GPIO_2_20 |
+				MUX_PAD_CTRL(EPDC_PAD_CTRL));
+	/* Set as output */
+	gpio_direction_output(IMX_GPIO_NR(2, 20), 1);
+}
+
+int setup_waveform_file(void)
+{
+#ifdef CONFIG_WAVEFORM_FILE_IN_MMC
+	int mmc_dev = mmc_get_env_devno();
+	ulong offset = CONFIG_WAVEFORM_FILE_OFFSET;
+	ulong size = CONFIG_WAVEFORM_FILE_SIZE;
+	ulong addr = CONFIG_WAVEFORM_BUF_ADDR;
+	struct mmc *mmc = find_mmc_device(mmc_dev);
+	uint blk_start, blk_cnt, n;
+
+	if (!mmc) {
+		printf("MMC Device %d not found\n", mmc_dev);
+		return -1;
+	}
+
+	if (mmc_init(mmc)) {
+		puts("MMC init failed\n");
+		return -1;
+	}
+
+	blk_start = ALIGN(offset, mmc->read_bl_len) / mmc->read_bl_len;
+	blk_cnt   = ALIGN(size, mmc->read_bl_len) / mmc->read_bl_len;
+	n = mmc->block_dev.block_read(mmc_dev, blk_start,
+				      blk_cnt, (u_char *)addr);
+	flush_cache((ulong)addr, blk_cnt * mmc->read_bl_len);
+
+	return (n == blk_cnt) ? 0 : -1;
+#else
+	return -1;
+#endif
+}
+
+static void epdc_enable_pins(void)
+{
+	/* epdc iomux settings */
+	imx_iomux_v3_setup_multiple_pads(epdc_enable_pads,
+				ARRAY_SIZE(epdc_enable_pads));
+}
+
+static void epdc_disable_pins(void)
+{
+	/* Configure MUX settings for EPDC pins to GPIO */
+	imx_iomux_v3_setup_multiple_pads(epdc_disable_pads,
+				ARRAY_SIZE(epdc_disable_pads));
+}
+
+static void setup_epdc(void)
+{
+	unsigned int reg;
+
+	/*** epdc Maxim PMIC settings ***/
+
+	/* EPDC PWRSTAT - GPIO2[21] for PWR_GOOD status */
+	imx_iomux_v3_setup_pad(MX6_PAD_EIM_A17__GPIO_2_21 |
+				MUX_PAD_CTRL(EPDC_PAD_CTRL));
+
+	/* EPDC VCOM0 - GPIO3[17] for VCOM control */
+	imx_iomux_v3_setup_pad(MX6_PAD_EIM_D17__GPIO_3_17 |
+				MUX_PAD_CTRL(EPDC_PAD_CTRL));
+
+	/* UART4 TXD - GPIO3[20] for EPD PMIC WAKEUP */
+	imx_iomux_v3_setup_pad(MX6_PAD_EIM_D20__GPIO_3_20 |
+				MUX_PAD_CTRL(EPDC_PAD_CTRL));
+
+	/* EIM_A18 - GPIO2[20] for EPD PWR CTL0 */
+	imx_iomux_v3_setup_pad(MX6_PAD_EIM_A18__GPIO_2_20 |
+				MUX_PAD_CTRL(EPDC_PAD_CTRL));
+
+	/*** Set pixel clock rates for EPDC ***/
+
+	/* EPDC AXI clk (IPU2_CLK) from PFD_400M, set to 396/2 = 198MHz */
+	reg = readl(CCM_BASE_ADDR + CLKCTL_CSCDR3);
+	reg &= ~0x7C000;
+	reg |= (1 << 16) | (1 << 14);
+	writel(reg, CCM_BASE_ADDR + CLKCTL_CSCDR3);
+
+	/* EPDC AXI clk enable */
+	reg = readl(CCM_BASE_ADDR + CLKCTL_CCGR3);
+	reg |= 0x00C0;
+	writel(reg, CCM_BASE_ADDR + CLKCTL_CCGR3);
+
+	/* EPDC PIX clk (IPU2_DI1_CLK) from PLL5, set to 650/4/6 = ~27MHz */
+	reg = readl(CCM_BASE_ADDR + CLKCTL_CSCDR2);
+	reg &= ~0x3FE00;
+	reg |= (2 << 15) | (5 << 12);
+	writel(reg, CCM_BASE_ADDR + CLKCTL_CSCDR2);
+
+	/* PLL5 enable (defaults to 650) */
+	reg = readl(ANATOP_BASE_ADDR + ANATOP_PLL_VIDEO);
+	reg &= ~((1 << 16) | (1 << 12));
+	reg |= (1 << 13);
+	writel(reg, ANATOP_BASE_ADDR + ANATOP_PLL_VIDEO);
+
+	/* EPDC PIX clk enable */
+	reg = readl(CCM_BASE_ADDR + CLKCTL_CCGR3);
+	reg |= 0x0C00;
+	writel(reg, CCM_BASE_ADDR + CLKCTL_CCGR3);
+
+	panel_info.epdc_data.working_buf_addr = CONFIG_WORKING_BUF_ADDR;
+	panel_info.epdc_data.waveform_buf_addr = CONFIG_WAVEFORM_BUF_ADDR;
+
+	panel_info.epdc_data.wv_modes.mode_init = 0;
+	panel_info.epdc_data.wv_modes.mode_du = 1;
+	panel_info.epdc_data.wv_modes.mode_gc4 = 3;
+	panel_info.epdc_data.wv_modes.mode_gc8 = 2;
+	panel_info.epdc_data.wv_modes.mode_gc16 = 2;
+	panel_info.epdc_data.wv_modes.mode_gc32 = 2;
+
+	panel_info.epdc_data.epdc_timings = panel_timings;
+
+	setup_epdc_power();
+
+	/* Assign fb_base */
+	gd->fb_base = CONFIG_FB_BASE;
+}
+
+void epdc_power_on(void)
+{
+	unsigned int reg;
+
+	/* Set EPD_PWR_CTL0 to high - enable EINK_VDD (3.15) */
+	gpio_set_value(IMX_GPIO_NR(2, 20), 1);
+	udelay(1000);
+
+	/* Enable epdc signal pin */
+	epdc_enable_pins();
+
+	/* Set PMIC Wakeup to high - enable Display power */
+	gpio_set_value(IMX_GPIO_NR(3, 20), 1);
+
+	/* Wait for PWRGOOD == 1 */
+	while (1) {
+		reg = readl(GPIO2_BASE_ADDR + GPIO_PSR);
+		if (!(reg & (1 << 21)))
+			break;
+
+		udelay(100);
+	}
+
+	/* Enable VCOM */
+	gpio_set_value(IMX_GPIO_NR(3, 17), 1);
+
+	udelay(500);
+}
+
+void epdc_power_off(void)
+{
+	/* Set PMIC Wakeup to low - disable Display power */
+	gpio_set_value(IMX_GPIO_NR(3, 20), 0);
+
+	/* Disable VCOM */
+	gpio_set_value(IMX_GPIO_NR(3, 17), 0);
+
+	epdc_disable_pins();
+
+	/* Set EPD_PWR_CTL0 to low - disable EINK_VDD (3.15) */
+	gpio_set_value(IMX_GPIO_NR(2, 20), 0);
+}
+#endif
+
 #ifdef CONFIG_CMD_SATA
 int setup_sata(void)
 {
@@ -524,6 +844,10 @@ int board_init(void)
 	/* address of boot parameters */
 	gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
 
+#ifdef CONFIG_MXC_EPDC
+	setup_epdc();
+#endif
+
 	return 0;
 }
 
diff --git a/board/freescale/mx6slevk/mx6slevk.c b/board/freescale/mx6slevk/mx6slevk.c
index 4cc9604..334c49f 100644
--- a/board/freescale/mx6slevk/mx6slevk.c
+++ b/board/freescale/mx6slevk/mx6slevk.c
@@ -26,6 +26,10 @@
 #include <i2c.h>
 #include <asm/imx-common/mxc_i2c.h>
 #endif
+#if defined(CONFIG_MXC_EPDC)
+#include <lcd.h>
+#include <mxc_epdc_fb.h>
+#endif
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -46,6 +50,9 @@ DECLARE_GLOBAL_DATA_PTR;
 	PAD_CTL_DSE_40ohm | PAD_CTL_HYS |			\
 	PAD_CTL_ODE | PAD_CTL_SRE_FAST)
 
+#define EPDC_PAD_CTRL    (PAD_CTL_PKE | PAD_CTL_SPEED_MED |	\
+	PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
+
 #if CONFIG_I2C_MXC
 #define PC MUX_PAD_CTRL(I2C_PAD_CTRL)
 /* I2C1 for PMIC */
@@ -98,6 +105,52 @@ static iomux_v3_cfg_t const fec_pads[] = {
 	MX6_PAD_FEC_TX_CLK__GPIO_4_21 | MUX_PAD_CTRL(NO_PAD_CTRL),
 };
 
+static iomux_v3_cfg_t const epdc_enable_pads[] = {
+	MX6_PAD_EPDC_D0__EPDC_SDDO_0	| MUX_PAD_CTRL(EPDC_PAD_CTRL),
+	MX6_PAD_EPDC_D1__EPDC_SDDO_1	| MUX_PAD_CTRL(EPDC_PAD_CTRL),
+	MX6_PAD_EPDC_D2__EPDC_SDDO_2	| MUX_PAD_CTRL(EPDC_PAD_CTRL),
+	MX6_PAD_EPDC_D3__EPDC_SDDO_3	| MUX_PAD_CTRL(EPDC_PAD_CTRL),
+	MX6_PAD_EPDC_D4__EPDC_SDDO_4	| MUX_PAD_CTRL(EPDC_PAD_CTRL),
+	MX6_PAD_EPDC_D5__EPDC_SDDO_5	| MUX_PAD_CTRL(EPDC_PAD_CTRL),
+	MX6_PAD_EPDC_D6__EPDC_SDDO_6	| MUX_PAD_CTRL(EPDC_PAD_CTRL),
+	MX6_PAD_EPDC_D7__EPDC_SDDO_7	| MUX_PAD_CTRL(EPDC_PAD_CTRL),
+	MX6_PAD_EPDC_GDCLK__EPDC_GDCLK	| MUX_PAD_CTRL(EPDC_PAD_CTRL),
+	MX6_PAD_EPDC_GDSP__EPDC_GDSP	| MUX_PAD_CTRL(EPDC_PAD_CTRL),
+	MX6_PAD_EPDC_GDOE__EPDC_GDOE	| MUX_PAD_CTRL(EPDC_PAD_CTRL),
+	MX6_PAD_EPDC_GDRL__EPDC_GDRL	| MUX_PAD_CTRL(EPDC_PAD_CTRL),
+	MX6_PAD_EPDC_SDCLK__EPDC_SDCLK	| MUX_PAD_CTRL(EPDC_PAD_CTRL),
+	MX6_PAD_EPDC_SDOE__EPDC_SDOE	| MUX_PAD_CTRL(EPDC_PAD_CTRL),
+	MX6_PAD_EPDC_SDLE__EPDC_SDLE	| MUX_PAD_CTRL(EPDC_PAD_CTRL),
+	MX6_PAD_EPDC_SDSHR__EPDC_SDSHR	| MUX_PAD_CTRL(EPDC_PAD_CTRL),
+	MX6_PAD_EPDC_BDR0__EPDC_BDR_0	| MUX_PAD_CTRL(EPDC_PAD_CTRL),
+	MX6_PAD_EPDC_SDCE0__EPDC_SDCE_0	| MUX_PAD_CTRL(EPDC_PAD_CTRL),
+	MX6_PAD_EPDC_SDCE1__EPDC_SDCE_1	| MUX_PAD_CTRL(EPDC_PAD_CTRL),
+	MX6_PAD_EPDC_SDCE2__EPDC_SDCE_2	| MUX_PAD_CTRL(EPDC_PAD_CTRL),
+};
+
+static iomux_v3_cfg_t const epdc_disable_pads[] = {
+	MX6_PAD_EPDC_D0__GPIO_1_7,
+	MX6_PAD_EPDC_D1__GPIO_1_8,
+	MX6_PAD_EPDC_D2__GPIO_1_9,
+	MX6_PAD_EPDC_D3__GPIO_1_10,
+	MX6_PAD_EPDC_D4__GPIO_1_11,
+	MX6_PAD_EPDC_D5__GPIO_1_12,
+	MX6_PAD_EPDC_D6__GPIO_1_13,
+	MX6_PAD_EPDC_D7__GPIO_1_14,
+	MX6_PAD_EPDC_GDCLK__GPIO_1_31,
+	MX6_PAD_EPDC_GDSP__GPIO_2_2,
+	MX6_PAD_EPDC_GDOE__GPIO_2_0,
+	MX6_PAD_EPDC_GDRL__GPIO_2_1,
+	MX6_PAD_EPDC_SDCLK__GPIO_1_23,
+	MX6_PAD_EPDC_SDOE__GPIO_1_25,
+	MX6_PAD_EPDC_SDLE__GPIO_1_24,
+	MX6_PAD_EPDC_SDSHR__GPIO_1_26,
+	MX6_PAD_EPDC_BDR0__GPIO_2_5,
+	MX6_PAD_EPDC_SDCE0__GPIO_1_27,
+	MX6_PAD_EPDC_SDCE1__GPIO_1_28,
+	MX6_PAD_EPDC_SDCE2__GPIO_1_29,
+};
+
 static void setup_iomux_uart(void)
 {
 	imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads));
@@ -130,6 +183,270 @@ int board_mmc_init(bd_t *bis)
 	return fsl_esdhc_initialize(bis, &usdhc_cfg[0]);
 }
 
+#ifdef CONFIG_MXC_EPDC
+#ifdef CONFIG_SPLASH_SCREEN
+extern int mmc_get_env_devno(void);
+int setup_splash_img(void)
+{
+#ifdef CONFIG_SPLASH_IS_IN_MMC
+	int mmc_dev = mmc_get_env_devno();
+	ulong offset = CONFIG_SPLASH_IMG_OFFSET;
+	ulong size = CONFIG_SPLASH_IMG_SIZE;
+	ulong addr = 0;
+	char *s = NULL;
+	struct mmc *mmc = find_mmc_device(mmc_dev);
+	uint blk_start, blk_cnt, n;
+
+	s = getenv("splashimage");
+
+	if (NULL == s) {
+		puts("env splashimage not found!\n");
+		return -1;
+	}
+	addr = simple_strtoul(s, NULL, 16);
+
+	if (!mmc) {
+		printf("MMC Device %d not found\n", mmc_dev);
+		return -1;
+	}
+
+	if (mmc_init(mmc)) {
+		puts("MMC init failed\n");
+		return -1;
+	}
+
+	blk_start = ALIGN(offset, mmc->read_bl_len) / mmc->read_bl_len;
+	blk_cnt = ALIGN(size, mmc->read_bl_len) / mmc->read_bl_len;
+	n = mmc->block_dev.block_read(mmc_dev, blk_start,
+				      blk_cnt, (u_char *)addr);
+	flush_cache((ulong)addr, blk_cnt * mmc->read_bl_len);
+
+	return (n == blk_cnt) ? 0 : -1;
+#endif
+
+	return 0;
+}
+#endif
+
+vidinfo_t panel_info = {
+	.vl_refresh = 85,
+	.vl_col = 800,
+	.vl_row = 600,
+	.vl_pixclock = 26666667,
+	.vl_left_margin = 8,
+	.vl_right_margin = 100,
+	.vl_upper_margin = 4,
+	.vl_lower_margin = 8,
+	.vl_hsync = 4,
+	.vl_vsync = 1,
+	.vl_sync = 0,
+	.vl_mode = 0,
+	.vl_flag = 0,
+	.vl_bpix = 3,
+	.cmap = 0,
+};
+
+struct epdc_timing_params panel_timings = {
+	.vscan_holdoff = 4,
+	.sdoed_width = 10,
+	.sdoed_delay = 20,
+	.sdoez_width = 10,
+	.sdoez_delay = 20,
+	.gdclk_hp_offs = 419,
+	.gdsp_offs = 20,
+	.gdoe_offs = 0,
+	.gdclk_offs = 5,
+	.num_ce = 1,
+};
+
+static void setup_epdc_power(void)
+{
+	/* Setup epdc voltage */
+
+	/* EPDC_PWRSTAT - GPIO2[13] for PWR_GOOD status */
+	imx_iomux_v3_setup_pad(MX6_PAD_EPDC_PWRSTAT__GPIO_2_13 |
+				MUX_PAD_CTRL(EPDC_PAD_CTRL));
+	gpio_direction_input(IMX_GPIO_NR(2, 13));
+
+	/* EPDC_VCOM0 - GPIO2[3] for VCOM control */
+	imx_iomux_v3_setup_pad(MX6_PAD_EPDC_VCOM0__GPIO_2_3 |
+				MUX_PAD_CTRL(EPDC_PAD_CTRL));
+
+	/* Set as output */
+	gpio_direction_output(IMX_GPIO_NR(2, 3), 1);
+
+	/* EPDC_PWRWAKEUP - GPIO2[14] for EPD PMIC WAKEUP */
+	imx_iomux_v3_setup_pad(MX6_PAD_EPDC_PWRWAKEUP__GPIO_2_14 |
+				MUX_PAD_CTRL(EPDC_PAD_CTRL));
+	/* Set as output */
+	gpio_direction_output(IMX_GPIO_NR(2, 14), 1);
+
+	/* EPDC_PWRCTRL0 - GPIO2[7] for EPD PWR CTL0 */
+	imx_iomux_v3_setup_pad(MX6_PAD_EPDC_PWRCTRL0__GPIO_2_7 |
+				MUX_PAD_CTRL(EPDC_PAD_CTRL));
+	/* Set as output */
+	gpio_direction_output(IMX_GPIO_NR(2, 7), 1);
+}
+
+int setup_waveform_file(void)
+{
+#ifdef CONFIG_WAVEFORM_FILE_IN_MMC
+	int mmc_dev = mmc_get_env_devno();
+	ulong offset = CONFIG_WAVEFORM_FILE_OFFSET;
+	ulong size = CONFIG_WAVEFORM_FILE_SIZE;
+	ulong addr = CONFIG_WAVEFORM_BUF_ADDR;
+	struct mmc *mmc = find_mmc_device(mmc_dev);
+	uint blk_start, blk_cnt, n;
+
+	if (!mmc) {
+		printf("MMC Device %d not found\n", mmc_dev);
+		return -1;
+	}
+
+	if (mmc_init(mmc)) {
+		puts("MMC init failed\n");
+		return -1;
+	}
+
+	blk_start = ALIGN(offset, mmc->read_bl_len) / mmc->read_bl_len;
+	blk_cnt = ALIGN(size, mmc->read_bl_len) / mmc->read_bl_len;
+	n = mmc->block_dev.block_read(mmc_dev, blk_start,
+				      blk_cnt, (u_char *)addr);
+	flush_cache((ulong)addr, blk_cnt * mmc->read_bl_len);
+
+	return (n == blk_cnt) ? 0 : -1;
+#else
+	return -1;
+#endif
+}
+
+static void epdc_enable_pins(void)
+{
+	/* epdc iomux settings */
+	imx_iomux_v3_setup_multiple_pads(epdc_enable_pads,
+				ARRAY_SIZE(epdc_enable_pads));
+}
+
+static void epdc_disable_pins(void)
+{
+	/* Configure MUX settings for EPDC pins to GPIO  and drive to 0 */
+	imx_iomux_v3_setup_multiple_pads(epdc_disable_pads,
+				ARRAY_SIZE(epdc_disable_pads));
+}
+
+static void setup_epdc(void)
+{
+	unsigned int reg;
+
+	/*** epdc Maxim PMIC settings ***/
+
+	/* EPDC PWRSTAT - GPIO2[13] for PWR_GOOD status */
+	imx_iomux_v3_setup_pad(MX6_PAD_EPDC_PWRSTAT__GPIO_2_13 |
+				MUX_PAD_CTRL(EPDC_PAD_CTRL));
+
+	/* EPDC VCOM0 - GPIO2[3] for VCOM control */
+	imx_iomux_v3_setup_pad(MX6_PAD_EPDC_VCOM0__GPIO_2_3 |
+				MUX_PAD_CTRL(EPDC_PAD_CTRL));
+
+	/* UART4 TXD - GPIO2[14] for EPD PMIC WAKEUP */
+	imx_iomux_v3_setup_pad(MX6_PAD_EPDC_PWRWAKEUP__GPIO_2_14 |
+				MUX_PAD_CTRL(EPDC_PAD_CTRL));
+
+	/* EIM_A18 - GPIO2[7] for EPD PWR CTL0 */
+	imx_iomux_v3_setup_pad(MX6_PAD_EPDC_PWRCTRL0__GPIO_2_7 |
+				MUX_PAD_CTRL(EPDC_PAD_CTRL));
+
+	/*** Set pixel clock rates for EPDC ***/
+
+	/* EPDC AXI clk from PFD_400M, set to 396/2 = 198MHz */
+	reg = readl(CCM_BASE_ADDR + CLKCTL_CHSCCDR);
+	reg &= ~0x3F000;
+	reg |= (0x4 << 15) | (1 << 12);
+	writel(reg, CCM_BASE_ADDR + CLKCTL_CHSCCDR);
+
+	/* EPDC AXI clk enable */
+	reg = readl(CCM_BASE_ADDR + CLKCTL_CCGR3);
+	reg |= 0x0030;
+	writel(reg, CCM_BASE_ADDR + CLKCTL_CCGR3);
+
+	/* EPDC PIX clk from PFD_540M, set to 540/4/5 = 27MHz */
+	reg = readl(CCM_BASE_ADDR + CLKCTL_CSCDR2);
+	reg &= ~0x03F000;
+	reg |= (0x5 << 15) | (4 << 12);
+	writel(reg, CCM_BASE_ADDR + CLKCTL_CSCDR2);
+
+	reg = readl(CCM_BASE_ADDR + CLKCTL_CBCMR);
+	reg &= ~0x03800000;
+	reg |= (0x3 << 23);
+	writel(reg, CCM_BASE_ADDR + CLKCTL_CBCMR);
+
+	/* EPDC PIX clk enable */
+	reg = readl(CCM_BASE_ADDR + CLKCTL_CCGR3);
+	reg |= 0x0C00;
+	writel(reg, CCM_BASE_ADDR + CLKCTL_CCGR3);
+
+	panel_info.epdc_data.working_buf_addr = CONFIG_WORKING_BUF_ADDR;
+	panel_info.epdc_data.waveform_buf_addr = CONFIG_WAVEFORM_BUF_ADDR;
+
+	panel_info.epdc_data.wv_modes.mode_init = 0;
+	panel_info.epdc_data.wv_modes.mode_du = 1;
+	panel_info.epdc_data.wv_modes.mode_gc4 = 3;
+	panel_info.epdc_data.wv_modes.mode_gc8 = 2;
+	panel_info.epdc_data.wv_modes.mode_gc16 = 2;
+	panel_info.epdc_data.wv_modes.mode_gc32 = 2;
+
+	panel_info.epdc_data.epdc_timings = panel_timings;
+
+	setup_epdc_power();
+
+	/* Assign fb_base */
+	gd->fb_base = CONFIG_FB_BASE;
+}
+
+void epdc_power_on(void)
+{
+	unsigned int reg;
+
+	/* Set EPD_PWR_CTL0 to high - enable EINK_VDD (3.15) */
+	gpio_set_value(IMX_GPIO_NR(2, 7), 1);
+	udelay(1000);
+
+	/* Enable epdc signal pin */
+	epdc_enable_pins();
+
+	/* Set PMIC Wakeup to high - enable Display power */
+	gpio_set_value(IMX_GPIO_NR(2, 14), 1);
+
+	/* Wait for PWRGOOD == 1 */
+	while (1) {
+		reg = readl(GPIO2_BASE_ADDR + GPIO_PSR);
+		if (!(reg & (1 << 13)))
+			break;
+
+		udelay(100);
+	}
+
+	/* Enable VCOM */
+	gpio_set_value(IMX_GPIO_NR(2, 3), 1);
+
+	udelay(500);
+}
+
+void epdc_power_off(void)
+{
+	/* Set PMIC Wakeup to low - disable Display power */
+	gpio_set_value(IMX_GPIO_NR(2, 14), 0);
+
+	/* Disable VCOM */
+	gpio_set_value(IMX_GPIO_NR(2, 3), 0);
+
+	epdc_disable_pins();
+
+	/* Set EPD_PWR_CTL0 to low - disable EINK_VDD (3.15) */
+	gpio_set_value(IMX_GPIO_NR(2, 7), 0);
+}
+#endif
+
 #ifdef CONFIG_FEC_MXC
 int board_eth_init(bd_t *bis)
 {
@@ -282,6 +599,9 @@ int board_init(void)
 	setup_fec();
 #endif
 
+#ifdef	CONFIG_MXC_EPDC
+	setup_epdc();
+#endif
 	return 0;
 }
 
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index 53952ab..6bc81ff 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -36,6 +36,7 @@ COBJS-$(CONFIG_EXYNOS_MIPI_DSIM) += exynos_mipi_dsi.o exynos_mipi_dsi_common.o \
 COBJS-$(CONFIG_EXYNOS_PWM_BL) += exynos_pwm_bl.o
 COBJS-$(CONFIG_FSL_DIU_FB) += fsl_diu_fb.o videomodes.o
 COBJS-$(CONFIG_MPC8XX_LCD) += mpc8xx_lcd.o
+COBJS-$(CONFIG_MXC_EPDC) += mxc_epdc_fb.o
 COBJS-$(CONFIG_PXA_LCD) += pxa_lcd.o
 COBJS-$(CONFIG_S6E8AX0) += s6e8ax0.o
 COBJS-$(CONFIG_S6E63D6) += s6e63d6.o
diff --git a/drivers/video/mxc_epdc_fb.c b/drivers/video/mxc_epdc_fb.c
new file mode 100644
index 0000000..044d36d
--- /dev/null
+++ b/drivers/video/mxc_epdc_fb.c
@@ -0,0 +1,467 @@
+/*
+ * Copyright (C) 2010-2013 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+/*
+ * Based on STMP378X LCDIF
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+#include <common.h>
+#include <lcd.h>
+#include <linux/list.h>
+#include <linux/err.h>
+#include <linux/types.h>
+
+#include <mxc_epdc_fb.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void *lcd_base;			/* Start of framebuffer memory	*/
+void *lcd_console_address;	/* Start of console buffer	*/
+
+int lcd_color_fg;
+int lcd_color_bg;
+
+short console_col;
+short console_row;
+
+int rev;
+
+void lcd_initcolregs(void)
+{
+}
+
+void lcd_setcolreg(ushort regno, ushort red, ushort green, ushort blue)
+{
+}
+
+#define TEMP_USE_DEFAULT 8
+
+#define UPDATE_MODE_PARTIAL			0x0
+#define UPDATE_MODE_FULL			0x1
+
+#define TRUE 1
+#define FALSE 0
+
+#define msleep(a)	udelay(a * 1000)
+
+
+/********************************************************
+ * Start Low-Level EPDC Functions
+ ********************************************************/
+
+static inline void epdc_set_screen_res(u32 width, u32 height)
+{
+	u32 val = (height << EPDC_RES_VERTICAL_OFFSET) | width;
+
+	REG_WR(EPDC_BASE, EPDC_RES, val);
+}
+
+static inline void epdc_set_update_coord(u32 x, u32 y)
+{
+	u32 val = (y << EPDC_UPD_CORD_YCORD_OFFSET) | x;
+
+	REG_WR(EPDC_BASE, EPDC_UPD_CORD, val);
+}
+
+static inline void epdc_set_update_dimensions(u32 width, u32 height)
+{
+	u32 val = (height << EPDC_UPD_SIZE_HEIGHT_OFFSET) | width;
+
+	REG_WR(EPDC_BASE, EPDC_UPD_SIZE, val);
+}
+
+static void epdc_submit_update(u32 lut_num, u32 waveform_mode, u32 update_mode,
+			       int use_test_mode, u32 np_val)
+{
+	u32 reg_val = 0;
+
+	if (use_test_mode) {
+		reg_val |=
+			((np_val << EPDC_UPD_FIXED_FIXNP_OFFSET) &
+			EPDC_UPD_FIXED_FIXNP_MASK) | EPDC_UPD_FIXED_FIXNP_EN;
+
+		REG_WR(EPDC_BASE, EPDC_UPD_FIXED, reg_val);
+
+		reg_val = EPDC_UPD_CTRL_USE_FIXED;
+	} else {
+		REG_WR(EPDC_BASE, EPDC_UPD_FIXED, reg_val);
+	}
+
+	reg_val |=
+		((lut_num << EPDC_UPD_CTRL_LUT_SEL_OFFSET) &
+		EPDC_UPD_CTRL_LUT_SEL_MASK) |
+		((waveform_mode << EPDC_UPD_CTRL_WAVEFORM_MODE_OFFSET) &
+		EPDC_UPD_CTRL_WAVEFORM_MODE_MASK) |
+		update_mode;
+
+	REG_WR(EPDC_BASE, EPDC_UPD_CTRL, reg_val);
+}
+
+static inline int epdc_is_lut_active(u32 lut_num)
+{
+	u32 val = REG_RD(EPDC_BASE, EPDC_STATUS_LUTS);
+	int is_active = val & (1 << lut_num) ? TRUE : FALSE;
+
+	return is_active;
+}
+
+static void epdc_set_horizontal_timing(u32 horiz_start, u32 horiz_end,
+				       u32 hsync_width, u32 hsync_line_length)
+{
+	u32 reg_val =
+		((hsync_width << EPDC_TCE_HSCAN1_LINE_SYNC_WIDTH_OFFSET) &
+		EPDC_TCE_HSCAN1_LINE_SYNC_WIDTH_MASK)
+		| ((hsync_line_length << EPDC_TCE_HSCAN1_LINE_SYNC_OFFSET) &
+		EPDC_TCE_HSCAN1_LINE_SYNC_MASK);
+	REG_WR(EPDC_BASE, EPDC_TCE_HSCAN1, reg_val);
+
+	reg_val =
+		((horiz_start << EPDC_TCE_HSCAN2_LINE_BEGIN_OFFSET) &
+		EPDC_TCE_HSCAN2_LINE_BEGIN_MASK)
+		| ((horiz_end << EPDC_TCE_HSCAN2_LINE_END_OFFSET) &
+		EPDC_TCE_HSCAN2_LINE_END_MASK);
+	REG_WR(EPDC_BASE, EPDC_TCE_HSCAN2, reg_val);
+}
+
+static void epdc_set_vertical_timing(u32 vert_start, u32 vert_end,
+					u32 vsync_width)
+{
+	u32 reg_val =
+		((vert_start << EPDC_TCE_VSCAN_FRAME_BEGIN_OFFSET) &
+		EPDC_TCE_VSCAN_FRAME_BEGIN_MASK)
+		| ((vert_end << EPDC_TCE_VSCAN_FRAME_END_OFFSET) &
+		EPDC_TCE_VSCAN_FRAME_END_MASK)
+		| ((vsync_width << EPDC_TCE_VSCAN_FRAME_SYNC_OFFSET) &
+		EPDC_TCE_VSCAN_FRAME_SYNC_MASK);
+	REG_WR(EPDC_BASE, EPDC_TCE_VSCAN, reg_val);
+}
+
+static void epdc_init_settings(void)
+{
+	u32 reg_val;
+	int num_ce;
+
+	/* EPDC_CTRL */
+	reg_val = REG_RD(EPDC_BASE, EPDC_CTRL);
+	reg_val &= ~EPDC_CTRL_UPD_DATA_SWIZZLE_MASK;
+	reg_val |= EPDC_CTRL_UPD_DATA_SWIZZLE_NO_SWAP;
+	reg_val &= ~EPDC_CTRL_LUT_DATA_SWIZZLE_MASK;
+	reg_val |= EPDC_CTRL_LUT_DATA_SWIZZLE_NO_SWAP;
+	REG_SET(EPDC_BASE, EPDC_CTRL, reg_val);
+
+	/* EPDC_FORMAT - 2bit TFT and 4bit Buf pixel format */
+	reg_val = EPDC_FORMAT_TFT_PIXEL_FORMAT_2BIT
+		| EPDC_FORMAT_BUF_PIXEL_FORMAT_P4N
+		| ((0x0 << EPDC_FORMAT_DEFAULT_TFT_PIXEL_OFFSET) &
+		EPDC_FORMAT_DEFAULT_TFT_PIXEL_MASK);
+	REG_WR(EPDC_BASE, EPDC_FORMAT, reg_val);
+
+	/* EPDC_FIFOCTRL (disabled) */
+	reg_val =
+		((100 << EPDC_FIFOCTRL_FIFO_INIT_LEVEL_OFFSET) &
+		EPDC_FIFOCTRL_FIFO_INIT_LEVEL_MASK)
+		| ((200 << EPDC_FIFOCTRL_FIFO_H_LEVEL_OFFSET) &
+		EPDC_FIFOCTRL_FIFO_H_LEVEL_MASK)
+		| ((100 << EPDC_FIFOCTRL_FIFO_L_LEVEL_OFFSET) &
+		EPDC_FIFOCTRL_FIFO_L_LEVEL_MASK);
+	REG_WR(EPDC_BASE, EPDC_FIFOCTRL, reg_val);
+
+	/* EPDC_TEMP - Use default temperature */
+	REG_WR(EPDC_BASE, EPDC_TEMP, TEMP_USE_DEFAULT);
+
+	/* EPDC_RES */
+	epdc_set_screen_res(panel_info.vl_col, panel_info.vl_row);
+
+	/*
+	 * EPDC_TCE_CTRL
+	 * VSCAN_HOLDOFF = 4
+	 * VCOM_MODE = MANUAL
+	 * VCOM_VAL = 0
+	 * DDR_MODE = DISABLED
+	 * LVDS_MODE_CE = DISABLED
+	 * LVDS_MODE = DISABLED
+	 * DUAL_SCAN = DISABLED
+	 * SDDO_WIDTH = 8bit
+	 * PIXELS_PER_SDCLK = 4
+	 */
+	reg_val =
+		((panel_info.epdc_data.epdc_timings.vscan_holdoff <<
+			EPDC_TCE_CTRL_VSCAN_HOLDOFF_OFFSET) &
+			EPDC_TCE_CTRL_VSCAN_HOLDOFF_MASK)
+		| EPDC_TCE_CTRL_PIXELS_PER_SDCLK_4;
+	REG_WR(EPDC_BASE, EPDC_TCE_CTRL, reg_val);
+
+	/* EPDC_TCE_HSCAN */
+	epdc_set_horizontal_timing(panel_info.vl_left_margin,
+				panel_info.vl_right_margin,
+				panel_info.vl_hsync,
+				panel_info.vl_hsync);
+
+	/* EPDC_TCE_VSCAN */
+	epdc_set_vertical_timing(panel_info.vl_upper_margin,
+				 panel_info.vl_lower_margin,
+				 panel_info.vl_vsync);
+
+	/* EPDC_TCE_OE */
+	reg_val =
+		((panel_info.epdc_data.epdc_timings.sdoed_width <<
+			EPDC_TCE_OE_SDOED_WIDTH_OFFSET) &
+			EPDC_TCE_OE_SDOED_WIDTH_MASK)
+		| ((panel_info.epdc_data.epdc_timings.sdoed_delay <<
+			EPDC_TCE_OE_SDOED_DLY_OFFSET) &
+			EPDC_TCE_OE_SDOED_DLY_MASK)
+		| ((panel_info.epdc_data.epdc_timings.sdoez_width <<
+			EPDC_TCE_OE_SDOEZ_WIDTH_OFFSET) &
+			EPDC_TCE_OE_SDOEZ_WIDTH_MASK)
+		| ((panel_info.epdc_data.epdc_timings.sdoez_delay <<
+			EPDC_TCE_OE_SDOEZ_DLY_OFFSET) &
+			EPDC_TCE_OE_SDOEZ_DLY_MASK);
+	REG_WR(EPDC_BASE, EPDC_TCE_OE, reg_val);
+
+	/* EPDC_TCE_TIMING1 */
+	REG_WR(EPDC_BASE, EPDC_TCE_TIMING1, 0x0);
+
+	/* EPDC_TCE_TIMING2 */
+	reg_val =
+		((panel_info.epdc_data.epdc_timings.gdclk_hp_offs <<
+			EPDC_TCE_TIMING2_GDCLK_HP_OFFSET) &
+			EPDC_TCE_TIMING2_GDCLK_HP_MASK)
+		| ((panel_info.epdc_data.epdc_timings.gdsp_offs <<
+			EPDC_TCE_TIMING2_GDSP_OFFSET_OFFSET) &
+			EPDC_TCE_TIMING2_GDSP_OFFSET_MASK);
+	REG_WR(EPDC_BASE, EPDC_TCE_TIMING2, reg_val);
+
+	/* EPDC_TCE_TIMING3 */
+	reg_val =
+		((panel_info.epdc_data.epdc_timings.gdoe_offs <<
+			EPDC_TCE_TIMING3_GDOE_OFFSET_OFFSET) &
+			EPDC_TCE_TIMING3_GDOE_OFFSET_MASK)
+		| ((panel_info.epdc_data.epdc_timings.gdclk_offs <<
+			EPDC_TCE_TIMING3_GDCLK_OFFSET_OFFSET) &
+			EPDC_TCE_TIMING3_GDCLK_OFFSET_MASK);
+	REG_WR(EPDC_BASE, EPDC_TCE_TIMING3, reg_val);
+
+	/*
+	 * EPDC_TCE_SDCFG
+	 * SDCLK_HOLD = 1
+	 * SDSHR = 1
+	 * NUM_CE = 1
+	 * SDDO_REFORMAT = FLIP_PIXELS
+	 * SDDO_INVERT = DISABLED
+	 * PIXELS_PER_CE = display horizontal resolution
+	 */
+	num_ce = panel_info.epdc_data.epdc_timings.num_ce;
+	if (num_ce == 0)
+		num_ce = 1;
+	reg_val = EPDC_TCE_SDCFG_SDCLK_HOLD | EPDC_TCE_SDCFG_SDSHR
+		| ((num_ce << EPDC_TCE_SDCFG_NUM_CE_OFFSET) & EPDC_TCE_SDCFG_NUM_CE_MASK)
+		| EPDC_TCE_SDCFG_SDDO_REFORMAT_FLIP_PIXELS
+		| ((panel_info.vl_col << EPDC_TCE_SDCFG_PIXELS_PER_CE_OFFSET) &
+		EPDC_TCE_SDCFG_PIXELS_PER_CE_MASK);
+	REG_WR(EPDC_BASE, EPDC_TCE_SDCFG, reg_val);
+
+	/*
+	 * EPDC_TCE_GDCFG
+	 * GDRL = 1
+	 * GDOE_MODE = 0;
+	 * GDSP_MODE = 0;
+	 */
+	reg_val = EPDC_TCE_SDCFG_GDRL;
+	REG_WR(EPDC_BASE, EPDC_TCE_GDCFG, reg_val);
+
+	/*
+	 * EPDC_TCE_POLARITY
+	 * SDCE_POL = ACTIVE LOW
+	 * SDLE_POL = ACTIVE HIGH
+	 * SDOE_POL = ACTIVE HIGH
+	 * GDOE_POL = ACTIVE HIGH
+	 * GDSP_POL = ACTIVE LOW
+	 */
+	reg_val = EPDC_TCE_POLARITY_SDLE_POL_ACTIVE_HIGH
+		| EPDC_TCE_POLARITY_SDOE_POL_ACTIVE_HIGH
+		| EPDC_TCE_POLARITY_GDOE_POL_ACTIVE_HIGH;
+	REG_WR(EPDC_BASE, EPDC_TCE_POLARITY, reg_val);
+
+	/* EPDC_IRQ_MASK */
+	REG_WR(EPDC_BASE, EPDC_IRQ_MASK,
+		EPDC_IRQ_TCE_UNDERRUN_IRQ);
+
+	/*
+	 * EPDC_GPIO
+	 * PWRCOM = ?
+	 * PWRCTRL = ?
+	 * BDR = ?
+	 */
+	reg_val = ((0 << EPDC_GPIO_PWRCTRL_OFFSET) & EPDC_GPIO_PWRCTRL_MASK)
+		| ((0 << EPDC_GPIO_BDR_OFFSET) & EPDC_GPIO_BDR_MASK);
+	REG_WR(EPDC_BASE, EPDC_GPIO, reg_val);
+}
+
+static void draw_mode0(void)
+{
+	int i;
+
+	/* Program EPDC update to process buffer */
+	epdc_set_update_coord(0, 0);
+	epdc_set_update_dimensions(panel_info.vl_col, panel_info.vl_row);
+	epdc_submit_update(0, panel_info.epdc_data.wv_modes.mode_init,
+				UPDATE_MODE_FULL, FALSE, 0);
+
+	debug("Mode0 update - Waiting for LUT to complete...\n");
+
+	/* Will timeout after ~4-5 seconds */
+
+	for (i = 0; i < 40; i++) {
+		if (!epdc_is_lut_active(0)) {
+			debug("Mode0 init complete\n");
+			return;
+		}
+		msleep(100);
+	}
+
+	debug("Mode0 init failed!\n");
+
+}
+
+static void draw_splash_screen(void)
+{
+	int i;
+	int lut_num = 0;
+
+	/* Program EPDC update to process buffer */
+	epdc_set_update_coord(0, 0);
+	epdc_set_update_dimensions(panel_info.vl_col, panel_info.vl_row);
+	epdc_submit_update(lut_num, panel_info.epdc_data.wv_modes.mode_gc16,
+		UPDATE_MODE_FULL, FALSE, 0);
+
+	for (i = 0; i < 40; i++) {
+		if (!epdc_is_lut_active(lut_num)) {
+			debug("Splash screen update complete\n");
+			return;
+		}
+		msleep(100);
+	}
+	debug("Splash screen update failed!\n");
+}
+
+void lcd_enable(void)
+{
+	int i;
+
+	epdc_power_on();
+
+	lcd_base = (void *)CONFIG_FB_BASE;
+	/* Draw black border around framebuffer*/
+	memset(lcd_base, 0xFF, panel_info.vl_col * panel_info.vl_row);
+	memset(lcd_base, 0x0, 24 * panel_info.vl_col);
+	for (i = 24; i < (panel_info.vl_row - 24); i++) {
+		memset((u8 *)lcd_base + i * panel_info.vl_col, 0x00, 24);
+		memset((u8 *)lcd_base + i * panel_info.vl_col
+			+ panel_info.vl_col - 24, 0x00, 24);
+	}
+	memset((u8 *)lcd_base + panel_info.vl_col * (panel_info.vl_row - 24),
+		0x00, 24 * panel_info.vl_col);
+
+	flush_cache((ulong)lcd_base, panel_info.vl_col * panel_info.vl_row);
+
+	/* Draw data to display */
+	draw_mode0();
+
+	draw_splash_screen();
+}
+
+void lcd_disable(void)
+{
+	debug("lcd_disable\n");
+
+	/* Disable clocks to EPDC */
+	REG_SET(EPDC_BASE, EPDC_CTRL, EPDC_CTRL_CLKGATE);
+}
+
+void lcd_panel_disable(void)
+{
+	epdc_power_off();
+}
+
+void lcd_ctrl_init(void *lcdbase)
+{
+	unsigned int val;
+
+	/*
+	 * We rely on lcdbase being a physical address, i.e., either MMU off,
+	 * or 1-to-1 mapping. Might want to add some virt2phys here.
+	 */
+	if (!lcdbase)
+		return;
+
+	lcd_color_fg = 0xFF;
+	lcd_color_bg = 0xFF;
+
+	/* Reset */
+	REG_SET(EPDC_BASE, EPDC_CTRL, EPDC_CTRL_SFTRST);
+	while (!(REG_RD(EPDC_BASE, EPDC_CTRL) & EPDC_CTRL_CLKGATE))
+		;
+	REG_CLR(EPDC_BASE, EPDC_CTRL, EPDC_CTRL_SFTRST);
+
+	/* Enable clock gating (clear to enable) */
+	REG_CLR(EPDC_BASE, EPDC_CTRL, EPDC_CTRL_CLKGATE);
+	while (REG_RD(EPDC_BASE, EPDC_CTRL) &
+	       (EPDC_CTRL_SFTRST | EPDC_CTRL_CLKGATE))
+		;
+
+	debug("resolution %dx%d, bpp %d\n", (int)panel_info.vl_col,
+		(int)panel_info.vl_row, NBITS(panel_info.vl_bpix));
+
+	/* Get EPDC version */
+	val = REG_RD(EPDC_BASE, EPDC_VERSION);
+	rev = ((val & EPDC_VERSION_MAJOR_MASK) >>
+				EPDC_VERSION_MAJOR_OFFSET) * 10
+			+ ((val & EPDC_VERSION_MINOR_MASK) >>
+				EPDC_VERSION_MINOR_OFFSET);
+
+	/* Set framebuffer pointer */
+	REG_WR(EPDC_BASE, EPDC_UPD_ADDR, (u32)lcdbase);
+
+	/* Set Working Buffer pointer */
+	REG_WR(EPDC_BASE, EPDC_WB_ADDR, panel_info.epdc_data.working_buf_addr);
+	if (rev > 20)
+		REG_WR(EPDC_BASE, EPDC_WB_ADDR_TCE, panel_info.epdc_data.working_buf_addr);
+
+	/* Get waveform data address and offset */
+	if (setup_waveform_file()) {
+		printf("Can't load waveform data!\n");
+		return;
+	}
+
+	/* Set Waveform Buffer pointer */
+	REG_WR(EPDC_BASE, EPDC_WVADDR,
+		panel_info.epdc_data.waveform_buf_addr);
+
+	/* Initialize EPDC, passing pointer to EPDC registers */
+	epdc_init_settings();
+
+	return;
+}
+
+ulong calc_fbsize(void)
+{
+	return panel_info.vl_row * panel_info.vl_col * 2 \
+		* NBITS(panel_info.vl_bpix) / 8;
+}
+
diff --git a/include/configs/mx6qsabresd.h b/include/configs/mx6qsabresd.h
index 860dd4a..c6314b7 100644
--- a/include/configs/mx6qsabresd.h
+++ b/include/configs/mx6qsabresd.h
@@ -33,4 +33,37 @@
 #define CONFIG_SF_DEFAULT_CS   (0|(IMX_GPIO_NR(4, 9)<<8))
 #endif
 
+/*#define CONFIG_SPLASH_SCREEN*/
+/*#define CONFIG_MXC_EPDC*/
+
+/*
+ * SPLASH SCREEN Configs
+ */
+#ifdef CONFIG_SPLASH_SCREEN
+	/*
+	 * Framebuffer and LCD
+	 */
+	#define CONFIG_CMD_BMP
+	#define CONFIG_LCD
+	#define CONFIG_FB_BASE				(CONFIG_SYS_TEXT_BASE + 0x300000)
+	#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+#ifdef CONFIG_MXC_EPDC
+	#undef LCD_TEST_PATTERN
+	/* #define CONFIG_SPLASH_IS_IN_MMC			1 */
+	#define LCD_BPP					LCD_MONOCHROME
+	/* #define CONFIG_SPLASH_SCREEN_ALIGN		1 */
+
+	#define CONFIG_WORKING_BUF_ADDR			(CONFIG_SYS_TEXT_BASE + 0x100000)
+	#define CONFIG_WAVEFORM_BUF_ADDR		(CONFIG_SYS_TEXT_BASE + 0x200000)
+	#define CONFIG_WAVEFORM_FILE_OFFSET		0x600000
+	#define CONFIG_WAVEFORM_FILE_SIZE		0xF0A00
+	#define CONFIG_WAVEFORM_FILE_IN_MMC
+
+#ifdef CONFIG_SPLASH_IS_IN_MMC
+	#define CONFIG_SPLASH_IMG_OFFSET		0x4c000
+	#define CONFIG_SPLASH_IMG_SIZE			0x19000
+#endif
+#endif
+#endif /* CONFIG_SPLASH_SCREEN */
+
 #endif                         /* __MX6QSABRESD_CONFIG_H */
diff --git a/include/configs/mx6slevk.h b/include/configs/mx6slevk.h
index f7a10e3..98d0246 100644
--- a/include/configs/mx6slevk.h
+++ b/include/configs/mx6slevk.h
@@ -234,4 +234,37 @@
 #define CONFIG_CMD_CACHE
 #endif
 
+/*#define CONFIG_SPLASH_SCREEN*/
+
+/*
+ * SPLASH SCREEN Configs
+ */
+#ifdef CONFIG_SPLASH_SCREEN
+	/*
+	 * Framebuffer and LCD
+	 */
+	#define CONFIG_CMD_BMP
+	#define CONFIG_MXC_EPDC				1
+	#define CONFIG_LCD
+	#define CONFIG_FB_BASE				(CONFIG_SYS_TEXT_BASE + 0x300000)
+	#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+#ifdef CONFIG_MXC_EPDC
+	#undef LCD_TEST_PATTERN
+	/* #define CONFIG_SPLASH_IS_IN_MMC			1 */
+	#define LCD_BPP					LCD_MONOCHROME
+	/* #define CONFIG_SPLASH_SCREEN_ALIGN		1 */
+
+	#define CONFIG_WORKING_BUF_ADDR			(CONFIG_SYS_TEXT_BASE + 0x100000)
+	#define CONFIG_WAVEFORM_BUF_ADDR		(CONFIG_SYS_TEXT_BASE + 0x200000)
+	#define CONFIG_WAVEFORM_FILE_OFFSET		0x600000
+	#define CONFIG_WAVEFORM_FILE_SIZE		0xF0A00
+	#define CONFIG_WAVEFORM_FILE_IN_MMC
+
+#ifdef CONFIG_SPLASH_IS_IN_MMC
+	#define CONFIG_SPLASH_IMG_OFFSET		0x4c000
+	#define CONFIG_SPLASH_IMG_SIZE			0x19000
+#endif
+#endif
+#endif /* CONFIG_SPLASH_SCREEN */
+
 #endif				/* __CONFIG_H */
diff --git a/include/lcd.h b/include/lcd.h
index c6e7fc5..5744b88 100644
--- a/include/lcd.h
+++ b/include/lcd.h
@@ -253,6 +253,59 @@ typedef struct vidinfo {
 
 void init_panel_info(vidinfo_t *vid);
 
+#elif defined(CONFIG_MXC_EPDC)
+
+struct waveform_modes {
+	int mode_init;
+	int mode_du;
+	int mode_gc4;
+	int mode_gc8;
+	int mode_gc16;
+	int mode_gc32;
+};
+
+struct epdc_timing_params {
+    int vscan_holdoff;
+    int sdoed_width;
+    int sdoed_delay;
+    int sdoez_width;
+    int sdoez_delay;
+    int gdclk_hp_offs;
+    int gdsp_offs;
+    int gdoe_offs;
+    int gdclk_offs;
+    int num_ce;
+};
+
+struct epdc_data_struct {
+	/* EPDC buffer pointers */
+	u_long working_buf_addr;
+	u_long waveform_buf_addr;
+
+	/* Waveform mode definitions */
+	struct waveform_modes wv_modes;
+	struct epdc_timing_params epdc_timings;
+};
+
+typedef struct vidinfo {
+	u_long vl_refresh;      /* Refresh Rate Hz */
+	u_long vl_row;          /* resolution in x */
+	u_long vl_col;          /* resolution in y */
+	u_long vl_pixclock;     /* pixel clock in picoseconds */
+	u_long vl_left_margin;  /* Horizontal back porch */
+	u_long vl_right_margin; /* Horizontal front porch */
+	u_long vl_upper_margin; /* Vertical back porch */
+	u_long vl_lower_margin; /* Vertical front porch */
+	u_long vl_hsync;        /* Horizontal sync pulse length */
+	u_long vl_vsync;        /* Vertical sync pulse length */
+	u_long vl_sync;         /* Polarity on data enable */
+	u_long vl_mode;         /* Video Mode */
+	u_long vl_flag;
+	u_char  vl_bpix;
+	ushort  *cmap;
+	struct epdc_data_struct epdc_data;
+} vidinfo_t;
+
 #else
 
 typedef struct vidinfo {
diff --git a/include/mxc_epdc_fb.h b/include/mxc_epdc_fb.h
new file mode 100644
index 0000000..afe7b46
--- /dev/null
+++ b/include/mxc_epdc_fb.h
@@ -0,0 +1,458 @@
+/*
+ * Copyright (C) 2010-2013 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+#ifndef __EPDC_REGS_INCLUDED__
+#define __EPDC_REGS_INCLUDED__
+
+#include <linux/types.h>
+#include <linux/list.h>
+#include <asm/arch/imx-regs.h>
+
+/*************************************
+ * Register addresses
+ *************************************/
+#define EPDC_BASE			(EPDC_BASE_ADDR)
+
+#define EPDC_CTRL			(0x000)
+#define EPDC_CTRL_SET			(0x004)
+#define EPDC_CTRL_CLR			(0x008)
+#define EPDC_CTRL_TOG			(0x00c)
+#define EPDC_WVADDR			(0x020)
+#define EPDC_WB_ADDR			(0x030)
+#define EPDC_RES			(0x040)
+#define EPDC_FORMAT			(0x050)
+#define EPDC_FORMAT_SET			(0x054)
+#define EPDC_FORMAT_CLR			(0x058)
+#define EPDC_FORMAT_TOG			(0x05c)
+#define EPDC_FIFOCTRL			(0x0a0)
+#define EPDC_FIFOCTRL_SET		(0x0a4)
+#define EPDC_FIFOCTRL_CLR		(0x0a8)
+#define EPDC_FIFOCTRL_TOG		(0x0ac)
+#define EPDC_UPD_ADDR			(0x100)
+#define EPDC_UPD_STRIDE			(0x110)
+#define EPDC_UPD_CORD			(0x120)
+#define EPDC_UPD_SIZE			(0x140)
+#define EPDC_UPD_CTRL			(0x160)
+#define EPDC_UPD_FIXED			(0x180)
+#define EPDC_TEMP			(0x1a0)
+#define EPDC_AUTOWV_LUT			(0x1C0)
+#define EPDC_TCE_CTRL			(0x200)
+#define EPDC_TCE_SDCFG			(0x220)
+#define EPDC_TCE_GDCFG			(0x240)
+#define EPDC_TCE_HSCAN1			(0x260)
+#define EPDC_TCE_HSCAN2			(0x280)
+#define EPDC_TCE_VSCAN			(0x2a0)
+#define EPDC_TCE_OE			(0x2c0)
+#define EPDC_TCE_POLARITY		(0x2e0)
+#define EPDC_TCE_TIMING1		(0x300)
+#define EPDC_TCE_TIMING2		(0x310)
+#define EPDC_TCE_TIMING3		(0x320)
+#define EPDC_PIGEON_CTRL0		(0x380)
+#define EPDC_PIGEON_CTRL1		(0x390)
+#define EPDC_IRQ_MASK1			(0x3C0)
+#define EPDC_IRQ_MASK1_SET		(0x3C4)
+#define EPDC_IRQ_MASK1_CLR		(0x3C8)
+#define EPDC_IRQ_MASK1_TOG		(0x3CC)
+#define EPDC_IRQ_MASK2			(0x3D0)
+#define EPDC_IRQ_MASK2_SET		(0x3D4)
+#define EPDC_IRQ_MASK2_CLR		(0x3D8)
+#define EPDC_IRQ_MASK2_TOG		(0x3DC)
+#define EPDC_IRQ1			(0x3E0)
+#define EPDC_IRQ1_SET			(0x3E4)
+#define EPDC_IRQ1_CLR			(0x3E8)
+#define EPDC_IRQ1_TOG			(0x3EC)
+#define EPDC_IRQ2			(0x3F0)
+#define EPDC_IRQ2_SET			(0x3F4)
+#define EPDC_IRQ2_CLR			(0x3F8)
+#define EPDC_IRQ2_TOG			(0x3FC)
+#define EPDC_IRQ_MASK			(0x400)
+#define EPDC_IRQ_MASK_SET		(0x404)
+#define EPDC_IRQ_MASK_CLR		(0x408)
+#define EPDC_IRQ_MASK_TOG		(0x40c)
+#define EPDC_IRQ			(0x420)
+#define EPDC_IRQ_SET			(0x424)
+#define EPDC_IRQ_CLR			(0x428)
+#define EPDC_IRQ_TOG			(0x42c)
+#define EPDC_STATUS_LUTS		(0x440)
+#define EPDC_STATUS_LUTS_SET		(0x444)
+#define EPDC_STATUS_LUTS_CLR		(0x448)
+#define EPDC_STATUS_LUTS_TOG		(0x44c)
+#define EPDC_STATUS_LUTS2		(0x450)
+#define EPDC_STATUS_LUTS2_SET		(0x454)
+#define EPDC_STATUS_LUTS2_CLR		(0x458)
+#define EPDC_STATUS_LUTS2_TOG		(0x45C)
+#define EPDC_STATUS_NEXTLUT		(0x460)
+#define EPDC_STATUS_COL			(0x480)
+#define EPDC_STATUS_COL2		(0x490)
+#define EPDC_STATUS			(0x4a0)
+#define EPDC_STATUS_SET			(0x4a4)
+#define EPDC_STATUS_CLR			(0x4a8)
+#define EPDC_STATUS_TOG			(0x4ac)
+#define EPDC_UPD_COL_CORD		(0x4C0)
+#define EPDC_UPD_COL_SIZE		(0x4E0)
+#define EPDC_DEBUG			(0x500)
+#define EPDC_DEBUG_LUT			(0x530)
+#define EPDC_HIST1_PARAM		(0x600)
+#define EPDC_HIST2_PARAM		(0x610)
+#define EPDC_HIST4_PARAM		(0x620)
+#define EPDC_HIST8_PARAM0		(0x630)
+#define EPDC_HIST8_PARAM1		(0x640)
+#define EPDC_HIST16_PARAM0		(0x650)
+#define EPDC_HIST16_PARAM1		(0x660)
+#define EPDC_HIST16_PARAM2		(0x670)
+#define EPDC_HIST16_PARAM3		(0x680)
+#define EPDC_GPIO			(0x700)
+#define EPDC_VERSION			(0x7f0)
+#define EPDC_PIGEON_0_0			(0x800)
+#define EPDC_PIGEON_0_1			(0x810)
+#define EPDC_PIGEON_0_2			(0x820)
+#define EPDC_PIGEON_1_0			(0x840)
+#define EPDC_PIGEON_1_1			(0x850)
+#define EPDC_PIGEON_1_2			(0x860)
+#define EPDC_PIGEON_2_0			(0x880)
+#define EPDC_PIGEON_2_1			(0x890)
+#define EPDC_PIGEON_2_2			(0x8A0)
+#define EPDC_PIGEON_3_0			(0x8C0)
+#define EPDC_PIGEON_3_1			(0x8D0)
+#define EPDC_PIGEON_3_2			(0x8E0)
+#define EPDC_PIGEON_4_0			(0x900)
+#define EPDC_PIGEON_4_1			(0x910)
+#define EPDC_PIGEON_4_2			(0x920)
+#define EPDC_PIGEON_5_0			(0x940)
+#define EPDC_PIGEON_5_1			(0x950)
+#define EPDC_PIGEON_5_2			(0x960)
+#define EPDC_PIGEON_6_0			(0x980)
+#define EPDC_PIGEON_6_1			(0x990)
+#define EPDC_PIGEON_6_2			(0x9A0)
+#define EPDC_PIGEON_7_0			(0x9C0)
+#define EPDC_PIGEON_7_1			(0x9D0)
+#define EPDC_PIGEON_7_2			(0x9E0)
+#define EPDC_PIGEON_8_0			(0xA00)
+#define EPDC_PIGEON_8_1			(0xA10)
+#define EPDC_PIGEON_8_2			(0xA20)
+#define EPDC_PIGEON_9_0			(0xA40)
+#define EPDC_PIGEON_9_1			(0xA50)
+#define EPDC_PIGEON_9_2			(0xA60)
+#define EPDC_PIGEON_10_0		(0xA80)
+#define EPDC_PIGEON_10_1		(0xA90)
+#define EPDC_PIGEON_10_2		(0xAA0)
+#define EPDC_PIGEON_11_0		(0xAC0)
+#define EPDC_PIGEON_11_1		(0xAD0)
+#define EPDC_PIGEON_11_2		(0xAE0)
+#define EPDC_PIGEON_12_0		(0xB00)
+#define EPDC_PIGEON_12_1		(0xB10)
+#define EPDC_PIGEON_12_2		(0xB20)
+#define EPDC_PIGEON_13_0		(0xB40)
+#define EPDC_PIGEON_13_1		(0xB50)
+#define EPDC_PIGEON_13_2		(0xB60)
+#define EPDC_PIGEON_14_0		(0xB80)
+#define EPDC_PIGEON_14_1		(0xB90)
+#define EPDC_PIGEON_14_2		(0xBA0)
+#define EPDC_PIGEON_15_0		(0xBC0)
+#define EPDC_PIGEON_15_1		(0xBD0)
+#define EPDC_PIGEON_15_2		(0xBE0)
+#define EPDC_WB_ADDR_TCE		(0xC10)
+
+#define REG_RD(base, reg) \
+	(*(volatile unsigned int *)((base) + (reg)))
+#define REG_WR(base, reg, value) \
+	((*(volatile unsigned int *)((base) + (reg))) = (value))
+#define REG_SET(base, reg, value) \
+	((*(volatile unsigned int *)((base) + (reg ## _SET))) = (value))
+#define REG_CLR(base, reg, value) \
+	((*(volatile unsigned int *)((base) + (reg ## _CLR))) = (value))
+#define REG_TOG(base, reg, value) \
+	((*(volatile unsigned int *)((base) + (reg ## _TOG))) = (value))
+/*
+ * Register field definitions
+ */
+
+enum {
+	/* EPDC_CTRL field values */
+	EPDC_CTRL_SFTRST = 0x80000000,
+	EPDC_CTRL_CLKGATE = 0x40000000,
+	EPDC_CTRL_SRAM_POWERDOWN = 0x100,
+	EPDC_CTRL_UPD_DATA_SWIZZLE_MASK = 0xc0,
+	EPDC_CTRL_UPD_DATA_SWIZZLE_NO_SWAP = 0,
+	EPDC_CTRL_UPD_DATA_SWIZZLE_ALL_BYTES_SWAP = 0x40,
+	EPDC_CTRL_UPD_DATA_SWIZZLE_HWD_SWAP = 0x80,
+	EPDC_CTRL_UPD_DATA_SWIZZLE_HWD_BYTE_SWAP = 0xc0,
+	EPDC_CTRL_LUT_DATA_SWIZZLE_MASK = 0x30,
+	EPDC_CTRL_LUT_DATA_SWIZZLE_NO_SWAP = 0,
+	EPDC_CTRL_LUT_DATA_SWIZZLE_ALL_BYTES_SWAP = 0x10,
+	EPDC_CTRL_LUT_DATA_SWIZZLE_HWD_SWAP = 0x20,
+	EPDC_CTRL_LUT_DATA_SWIZZLE_HWD_BYTE_SWAP = 0x30,
+	EPDC_CTRL_BURST_LEN_8_8 = 0x1,
+	EPDC_CTRL_BURST_LEN_8_16 = 0,
+
+	/* EPDC_RES field values */
+	EPDC_RES_VERTICAL_MASK = 0x1fff0000,
+	EPDC_RES_VERTICAL_OFFSET = 16,
+	EPDC_RES_HORIZONTAL_MASK = 0x1fff,
+	EPDC_RES_HORIZONTAL_OFFSET = 0,
+
+	/* EPDC_FORMAT field values */
+	EPDC_FORMAT_BUF_PIXEL_SCALE_ROUND = 0x1000000,
+	EPDC_FORMAT_DEFAULT_TFT_PIXEL_MASK = 0xff0000,
+	EPDC_FORMAT_DEFAULT_TFT_PIXEL_OFFSET = 16,
+	EPDC_FORMAT_BUF_PIXEL_FORMAT_P2N = 0x200,
+	EPDC_FORMAT_BUF_PIXEL_FORMAT_P3N = 0x300,
+	EPDC_FORMAT_BUF_PIXEL_FORMAT_P4N = 0x400,
+	EPDC_FORMAT_BUF_PIXEL_FORMAT_P5N = 0x500,
+	EPDC_FORMAT_TFT_PIXEL_FORMAT_2BIT = 0x0,
+	EPDC_FORMAT_TFT_PIXEL_FORMAT_2BIT_VCOM = 0x1,
+	EPDC_FORMAT_TFT_PIXEL_FORMAT_4BIT = 0x2,
+	EPDC_FORMAT_TFT_PIXEL_FORMAT_4BIT_VCOM = 0x3,
+
+	/* EPDC_FIFOCTRL field values */
+	EPDC_FIFOCTRL_ENABLE_PRIORITY = 0x80000000,
+	EPDC_FIFOCTRL_FIFO_INIT_LEVEL_MASK = 0xff0000,
+	EPDC_FIFOCTRL_FIFO_INIT_LEVEL_OFFSET = 16,
+	EPDC_FIFOCTRL_FIFO_H_LEVEL_MASK = 0xff00,
+	EPDC_FIFOCTRL_FIFO_H_LEVEL_OFFSET = 8,
+	EPDC_FIFOCTRL_FIFO_L_LEVEL_MASK = 0xff,
+	EPDC_FIFOCTRL_FIFO_L_LEVEL_OFFSET = 0,
+
+	/* EPDC_UPD_CORD field values */
+	EPDC_UPD_CORD_YCORD_MASK = 0x1fff0000,
+	EPDC_UPD_CORD_YCORD_OFFSET = 16,
+	EPDC_UPD_CORD_XCORD_MASK = 0x1fff,
+	EPDC_UPD_CORD_XCORD_OFFSET = 0,
+
+	/* EPDC_UPD_SIZE field values */
+	EPDC_UPD_SIZE_HEIGHT_MASK = 0x1fff0000,
+	EPDC_UPD_SIZE_HEIGHT_OFFSET = 16,
+	EPDC_UPD_SIZE_WIDTH_MASK = 0x1fff,
+	EPDC_UPD_SIZE_WIDTH_OFFSET = 0,
+
+	/* EPDC_UPD_CTRL field values */
+	EPDC_UPD_CTRL_USE_FIXED = 0x80000000,
+	EPDC_UPD_CTRL_LUT_SEL_MASK = 0xf0000,
+	EPDC_UPD_CTRL_LUT_SEL_OFFSET = 16,
+	EPDC_UPD_CTRL_WAVEFORM_MODE_MASK = 0xff00,
+	EPDC_UPD_CTRL_WAVEFORM_MODE_OFFSET = 8,
+	EPDC_UPD_CTRL_AUTOWV_PAUSE = 0x8,
+	EPDC_UPD_CTRL_AUTOWV = 0x4,
+	EPDC_UPD_CTRL_DRY_RUN = 0x2,
+	EPDC_UPD_CTRL_UPDATE_MODE_FULL = 0x1,
+
+	/* EPDC_UPD_FIXED field values */
+	EPDC_UPD_FIXED_FIXNP_EN = 0x80000000,
+	EPDC_UPD_FIXED_FIXCP_EN = 0x40000000,
+	EPDC_UPD_FIXED_FIXNP_MASK = 0xff00,
+	EPDC_UPD_FIXED_FIXNP_OFFSET = 8,
+	EPDC_UPD_FIXED_FIXCP_MASK = 0xff,
+	EPDC_UPD_FIXED_FIXCP_OFFSET = 0,
+
+	/* EPDC_AUTOWV_LUT field values */
+	EPDC_AUTOWV_LUT_DATA_MASK = 0xFF0000,
+	EPDC_AUTOWV_LUT_DATA_OFFSET = 16,
+	EPDC_AUTOWV_LUT_ADDR_MASK = 0xFF,
+	EPDC_AUTOWV_LUT_ADDR_OFFSET = 0,
+
+	/* EPDC_TCE_CTRL field values */
+	EPDC_TCE_CTRL_VSCAN_HOLDOFF_MASK = 0x1ff0000,
+	EPDC_TCE_CTRL_VSCAN_HOLDOFF_OFFSET = 16,
+	EPDC_TCE_CTRL_VCOM_VAL_MASK = 0xc00,
+	EPDC_TCE_CTRL_VCOM_VAL_OFFSET = 10,
+	EPDC_TCE_CTRL_VCOM_MODE_AUTO = 0x200,
+	EPDC_TCE_CTRL_VCOM_MODE_MANUAL = 0x000,
+	EPDC_TCE_CTRL_DDR_MODE_ENABLE = 0x100,
+	EPDC_TCE_CTRL_LVDS_MODE_CE_ENABLE = 0x80,
+	EPDC_TCE_CTRL_LVDS_MODE_ENABLE = 0x40,
+	EPDC_TCE_CTRL_SCAN_DIR_1_UP = 0x20,
+	EPDC_TCE_CTRL_SCAN_DIR_0_UP = 0x10,
+	EPDC_TCE_CTRL_DUAL_SCAN_ENABLE = 0x8,
+	EPDC_TCE_CTRL_SDDO_WIDTH_16BIT = 0x4,
+	EPDC_TCE_CTRL_PIXELS_PER_SDCLK_2 = 1,
+	EPDC_TCE_CTRL_PIXELS_PER_SDCLK_4 = 2,
+	EPDC_TCE_CTRL_PIXELS_PER_SDCLK_8 = 3,
+
+	/* EPDC_TCE_SDCFG field values */
+	EPDC_TCE_SDCFG_SDCLK_HOLD = 0x200000,
+	EPDC_TCE_SDCFG_SDSHR = 0x100000,
+	EPDC_TCE_SDCFG_NUM_CE_MASK = 0xf0000,
+	EPDC_TCE_SDCFG_NUM_CE_OFFSET = 16,
+	EPDC_TCE_SDCFG_SDDO_REFORMAT_STANDARD = 0,
+	EPDC_TCE_SDCFG_SDDO_REFORMAT_FLIP_PIXELS = 0x4000,
+	EPDC_TCE_SDCFG_SDDO_INVERT_ENABLE = 0x2000,
+	EPDC_TCE_SDCFG_PIXELS_PER_CE_MASK = 0x1fff,
+	EPDC_TCE_SDCFG_PIXELS_PER_CE_OFFSET = 0,
+
+	/* EPDC_TCE_GDCFG field values */
+	EPDC_TCE_SDCFG_GDRL = 0x10,
+	EPDC_TCE_SDCFG_GDOE_MODE_DELAYED_GDCLK = 0x2,
+	EPDC_TCE_SDCFG_GDSP_MODE_FRAME_SYNC = 0x1,
+	EPDC_TCE_SDCFG_GDSP_MODE_ONE_LINE = 0x0,
+
+	/* EPDC_TCE_HSCAN1 field values */
+	EPDC_TCE_HSCAN1_LINE_SYNC_WIDTH_MASK = 0xfff0000,
+	EPDC_TCE_HSCAN1_LINE_SYNC_WIDTH_OFFSET = 16,
+	EPDC_TCE_HSCAN1_LINE_SYNC_MASK = 0xfff,
+	EPDC_TCE_HSCAN1_LINE_SYNC_OFFSET = 0,
+
+	/* EPDC_TCE_HSCAN2 field values */
+	EPDC_TCE_HSCAN2_LINE_END_MASK = 0xfff0000,
+	EPDC_TCE_HSCAN2_LINE_END_OFFSET = 16,
+	EPDC_TCE_HSCAN2_LINE_BEGIN_MASK = 0xfff,
+	EPDC_TCE_HSCAN2_LINE_BEGIN_OFFSET = 0,
+
+	/* EPDC_TCE_VSCAN field values */
+	EPDC_TCE_VSCAN_FRAME_END_MASK = 0xff0000,
+	EPDC_TCE_VSCAN_FRAME_END_OFFSET = 16,
+	EPDC_TCE_VSCAN_FRAME_BEGIN_MASK = 0xff00,
+	EPDC_TCE_VSCAN_FRAME_BEGIN_OFFSET = 8,
+	EPDC_TCE_VSCAN_FRAME_SYNC_MASK = 0xff,
+	EPDC_TCE_VSCAN_FRAME_SYNC_OFFSET = 0,
+
+	/* EPDC_TCE_OE field values */
+	EPDC_TCE_OE_SDOED_WIDTH_MASK = 0xff000000,
+	EPDC_TCE_OE_SDOED_WIDTH_OFFSET = 24,
+	EPDC_TCE_OE_SDOED_DLY_MASK = 0xff0000,
+	EPDC_TCE_OE_SDOED_DLY_OFFSET = 16,
+	EPDC_TCE_OE_SDOEZ_WIDTH_MASK = 0xff00,
+	EPDC_TCE_OE_SDOEZ_WIDTH_OFFSET = 8,
+	EPDC_TCE_OE_SDOEZ_DLY_MASK = 0xff,
+	EPDC_TCE_OE_SDOEZ_DLY_OFFSET = 0,
+
+	/* EPDC_TCE_POLARITY field values */
+	EPDC_TCE_POLARITY_GDSP_POL_ACTIVE_HIGH = 0x10,
+	EPDC_TCE_POLARITY_GDOE_POL_ACTIVE_HIGH = 0x8,
+	EPDC_TCE_POLARITY_SDOE_POL_ACTIVE_HIGH = 0x4,
+	EPDC_TCE_POLARITY_SDLE_POL_ACTIVE_HIGH = 0x2,
+	EPDC_TCE_POLARITY_SDCE_POL_ACTIVE_HIGH = 0x1,
+
+	/* EPDC_TCE_TIMING1 field values */
+	EPDC_TCE_TIMING1_SDLE_SHIFT_NONE = 0x00,
+	EPDC_TCE_TIMING1_SDLE_SHIFT_1 = 0x10,
+	EPDC_TCE_TIMING1_SDLE_SHIFT_2 = 0x20,
+	EPDC_TCE_TIMING1_SDLE_SHIFT_3 = 0x30,
+	EPDC_TCE_TIMING1_SDCLK_INVERT = 0x8,
+	EPDC_TCE_TIMING1_SDCLK_SHIFT_NONE = 0,
+	EPDC_TCE_TIMING1_SDCLK_SHIFT_1CYCLE = 1,
+	EPDC_TCE_TIMING1_SDCLK_SHIFT_2CYCLES = 2,
+	EPDC_TCE_TIMING1_SDCLK_SHIFT_3CYCLES = 3,
+
+	/* EPDC_TCE_TIMING2 field values */
+	EPDC_TCE_TIMING2_GDCLK_HP_MASK = 0xffff0000,
+	EPDC_TCE_TIMING2_GDCLK_HP_OFFSET = 16,
+	EPDC_TCE_TIMING2_GDSP_OFFSET_MASK = 0xffff,
+	EPDC_TCE_TIMING2_GDSP_OFFSET_OFFSET = 0,
+
+	/* EPDC_TCE_TIMING3 field values */
+	EPDC_TCE_TIMING3_GDOE_OFFSET_MASK = 0xffff0000,
+	EPDC_TCE_TIMING3_GDOE_OFFSET_OFFSET = 16,
+	EPDC_TCE_TIMING3_GDCLK_OFFSET_MASK = 0xffff,
+	EPDC_TCE_TIMING3_GDCLK_OFFSET_OFFSET = 0,
+
+	/* EPDC_IRQ_MASK/EPDC_IRQ field values */
+	EPDC_IRQ_WB_CMPLT_IRQ = 0x10000,
+	EPDC_IRQ_LUT_COL_IRQ = 0x20000,
+	EPDC_IRQ_TCE_UNDERRUN_IRQ = 0x40000,
+	EPDC_IRQ_FRAME_END_IRQ = 0x80000,
+	EPDC_IRQ_BUS_ERROR_IRQ = 0x100000,
+	EPDC_IRQ_TCE_IDLE_IRQ = 0x200000,
+	EPDC_IRQ_UPD_DONE_IRQ = 0x400000,
+	EPDC_IRQ_PWR_IRQ = 0x800000,
+
+	/* EPDC_STATUS_NEXTLUT field values */
+	EPDC_STATUS_NEXTLUT_NEXT_LUT_VALID = 0x100,
+	EPDC_STATUS_NEXTLUT_NEXT_LUT_MASK = 0x3F,
+	EPDC_STATUS_NEXTLUT_NEXT_LUT_OFFSET = 0,
+
+	/* EPDC_STATUS field values */
+	EPDC_STATUS_HISTOGRAM_CP_MASK = 0x1F0000,
+	EPDC_STATUS_HISTOGRAM_CP_OFFSET = 16,
+	EPDC_STATUS_HISTOGRAM_NP_MASK = 0x1F00,
+	EPDC_STATUS_HISTOGRAM_NP_OFFSET = 8,
+	EPDC_STATUS_UPD_VOID = 0x8,
+	EPDC_STATUS_LUTS_UNDERRUN = 0x4,
+	EPDC_STATUS_LUTS_BUSY = 0x2,
+	EPDC_STATUS_WB_BUSY = 0x1,
+
+	/* EPDC_UPD_COL_CORD field values */
+	EPDC_UPD_COL_CORD_YCORD_MASK = 0x1FFF0000,
+	EPDC_UPD_COL_CORD_YCORD_OFFSET = 16,
+	EPDC_UPD_COL_CORD_XCORD_MASK = 0x1FFF,
+	EPDC_UPD_COL_CORD_XCORD_OFFSET = 0,
+
+	/* EPDC_UPD_COL_SIZE field values */
+	EPDC_UPD_COL_SIZE_HEIGHT_MASK = 0x1FFF0000,
+	EPDC_UPD_COL_SIZE_HEIGHT_OFFSET = 16,
+	EPDC_UPD_COL_SIZE_WIDTH_MASK = 0x1FFF,
+	EPDC_UPD_COL_SIZE_WIDTH_OFFSET = 0,
+
+	/* EPDC_DEBUG field values */
+	EPDC_DEBUG_UNDERRUN_RECOVER = 0x2,
+	EPDC_DEBUG_COLLISION_OFF = 0x1,
+
+/* EPDC_HISTx_PARAM field values */
+	EPDC_HIST_PARAM_VALUE0_MASK = 0x1F,
+	EPDC_HIST_PARAM_VALUE0_OFFSET = 0,
+	EPDC_HIST_PARAM_VALUE1_MASK = 0x1F00,
+	EPDC_HIST_PARAM_VALUE1_OFFSET = 8,
+	EPDC_HIST_PARAM_VALUE2_MASK = 0x1F0000,
+	EPDC_HIST_PARAM_VALUE2_OFFSET = 16,
+	EPDC_HIST_PARAM_VALUE3_MASK = 0x1F000000,
+	EPDC_HIST_PARAM_VALUE3_OFFSET = 24,
+	EPDC_HIST_PARAM_VALUE4_MASK = 0x1F,
+	EPDC_HIST_PARAM_VALUE4_OFFSET = 0,
+	EPDC_HIST_PARAM_VALUE5_MASK = 0x1F00,
+	EPDC_HIST_PARAM_VALUE5_OFFSET = 8,
+	EPDC_HIST_PARAM_VALUE6_MASK = 0x1F0000,
+	EPDC_HIST_PARAM_VALUE6_OFFSET = 16,
+	EPDC_HIST_PARAM_VALUE7_MASK = 0x1F000000,
+	EPDC_HIST_PARAM_VALUE7_OFFSET = 24,
+	EPDC_HIST_PARAM_VALUE8_MASK = 0x1F,
+	EPDC_HIST_PARAM_VALUE8_OFFSET = 0,
+	EPDC_HIST_PARAM_VALUE9_MASK = 0x1F00,
+	EPDC_HIST_PARAM_VALUE9_OFFSET = 8,
+	EPDC_HIST_PARAM_VALUE10_MASK = 0x1F0000,
+	EPDC_HIST_PARAM_VALUE10_OFFSET = 16,
+	EPDC_HIST_PARAM_VALUE11_MASK = 0x1F000000,
+	EPDC_HIST_PARAM_VALUE11_OFFSET = 24,
+	EPDC_HIST_PARAM_VALUE12_MASK = 0x1F,
+	EPDC_HIST_PARAM_VALUE12_OFFSET = 0,
+	EPDC_HIST_PARAM_VALUE13_MASK = 0x1F00,
+	EPDC_HIST_PARAM_VALUE13_OFFSET = 8,
+	EPDC_HIST_PARAM_VALUE14_MASK = 0x1F0000,
+	EPDC_HIST_PARAM_VALUE14_OFFSET = 16,
+	EPDC_HIST_PARAM_VALUE15_MASK = 0x1F000000,
+	EPDC_HIST_PARAM_VALUE15_OFFSET = 24,
+
+	/* EPDC_GPIO field values */
+	EPDC_GPIO_PWRCOM = 0x40,
+	EPDC_GPIO_PWRCTRL_MASK = 0x3c,
+	EPDC_GPIO_PWRCTRL_OFFSET = 2,
+	EPDC_GPIO_BDR_MASK = 0x3,
+	EPDC_GPIO_BDR_OFFSET = 0,
+
+	/* EPDC_VERSION field values */
+	EPDC_VERSION_MAJOR_MASK = 0xFF000000,
+	EPDC_VERSION_MAJOR_OFFSET = 24,
+	EPDC_VERSION_MINOR_MASK = 0xFF0000,
+	EPDC_VERSION_MINOR_OFFSET = 16,
+	EPDC_VERSION_STEP_MASK = 0xFFFF,
+	EPDC_VERSION_STEP_OFFSET = 0,
+};
+
+int setup_waveform_file(void);
+void epdc_power_on(void);
+void epdc_power_off(void);
+
+#endif