nand: mxc: Prepare to add support for i.MX5

Add some abstraction to NFC definitions so that some parts of the current code
can also be used for future i.MX5 code.

Clean up a few things by the way.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Acked-by: Scott Wood <scottwood@freescale.com>
Tested-by: Fabio Estevam <fabio.estevam@freescale.com>

3 files changed, 97 insertions, 114 deletions

diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
index bb475f2..6ae95d6 100644
--- a/drivers/mtd/nand/mxc_nand.c
+++ b/drivers/mtd/nand/mxc_nand.c
@@ -119,7 +119,7 @@ static uint32_t *mxc_nand_memcpy32(uint32_t *dest, uint32_t *source, size_t size
 
 /*
  * This function polls the NANDFC to wait for the basic operation to
- * complete by checking the INT bit of config2 register.
+ * complete by checking the INT bit.
  */
 static void wait_op_done(struct mxc_nand_host *host, int max_retries,
 				uint16_t param)
@@ -127,10 +127,10 @@ static void wait_op_done(struct mxc_nand_host *host, int max_retries,
 	uint32_t tmp;
 
 	while (max_retries-- > 0) {
-		if (readw(&host->regs->config2) & NFC_INT) {
-			tmp = readw(&host->regs->config2);
-			tmp  &= ~NFC_INT;
-			writew(tmp, &host->regs->config2);
+		tmp = readnfc(&host->regs->config2);
+		if (tmp & NFC_V1_V2_CONFIG2_INT) {
+			tmp &= ~NFC_V1_V2_CONFIG2_INT;
+			writenfc(tmp, &host->regs->config2);
 			break;
 		}
 		udelay(1);
@@ -149,8 +149,8 @@ static void send_cmd(struct mxc_nand_host *host, uint16_t cmd)
 {
 	MTDDEBUG(MTD_DEBUG_LEVEL3, "send_cmd(host, 0x%x)\n", cmd);
 
-	writew(cmd, &host->regs->flash_cmd);
-	writew(NFC_CMD, &host->regs->config2);
+	writenfc(cmd, &host->regs->flash_cmd);
+	writenfc(NFC_CMD, &host->regs->operation);
 
 	/* Wait for operation to complete */
 	wait_op_done(host, TROP_US_DELAY, cmd);
@@ -165,8 +165,8 @@ static void send_addr(struct mxc_nand_host *host, uint16_t addr)
 {
 	MTDDEBUG(MTD_DEBUG_LEVEL3, "send_addr(host, 0x%x)\n", addr);
 
-	writew(addr, &host->regs->flash_addr);
-	writew(NFC_ADDR, &host->regs->config2);
+	writenfc(addr, &host->regs->flash_addr);
+	writenfc(NFC_ADDR, &host->regs->operation);
 
 	/* Wait for operation to complete */
 	wait_op_done(host, TROP_US_DELAY, addr);
@@ -198,19 +198,19 @@ static void send_prog_page(struct mxc_nand_host *host, uint8_t buf_id,
 		}
 	}
 
-	writew(buf_id, &host->regs->buf_addr);
+	writenfc(buf_id, &host->regs->buf_addr);
 
 	/* Configure spare or page+spare access */
 	if (!host->pagesize_2k) {
-		uint16_t config1 = readw(&host->regs->config1);
+		uint16_t config1 = readnfc(&host->regs->config1);
 		if (spare_only)
-			config1 |= NFC_SP_EN;
+			config1 |= NFC_CONFIG1_SP_EN;
 		else
-			config1 &= ~NFC_SP_EN;
-		writew(config1, &host->regs->config1);
+			config1 &= ~NFC_CONFIG1_SP_EN;
+		writenfc(config1, &host->regs->config1);
 	}
 
-	writew(NFC_INPUT, &host->regs->config2);
+	writenfc(NFC_INPUT, &host->regs->operation);
 
 	/* Wait for operation to complete */
 	wait_op_done(host, TROP_US_DELAY, spare_only);
@@ -225,19 +225,19 @@ static void send_read_page(struct mxc_nand_host *host, uint8_t buf_id,
 {
 	MTDDEBUG(MTD_DEBUG_LEVEL3, "send_read_page (%d)\n", spare_only);
 
-	writew(buf_id, &host->regs->buf_addr);
+	writenfc(buf_id, &host->regs->buf_addr);
 
 	/* Configure spare or page+spare access */
 	if (!host->pagesize_2k) {
-		uint32_t config1 = readw(&host->regs->config1);
+		uint32_t config1 = readnfc(&host->regs->config1);
 		if (spare_only)
-			config1 |= NFC_SP_EN;
+			config1 |= NFC_CONFIG1_SP_EN;
 		else
-			config1 &= ~NFC_SP_EN;
-		writew(config1, &host->regs->config1);
+			config1 &= ~NFC_CONFIG1_SP_EN;
+		writenfc(config1, &host->regs->config1);
 	}
 
-	writew(NFC_OUTPUT, &host->regs->config2);
+	writenfc(NFC_OUTPUT, &host->regs->operation);
 
 	/* Wait for operation to complete */
 	wait_op_done(host, TROP_US_DELAY, spare_only);
@@ -265,14 +265,14 @@ static void send_read_id(struct mxc_nand_host *host)
 	uint16_t tmp;
 
 	/* NANDFC buffer 0 is used for device ID output */
-	writew(0x0, &host->regs->buf_addr);
+	writenfc(0x0, &host->regs->buf_addr);
 
 	/* Read ID into main buffer */
-	tmp = readw(&host->regs->config1);
-	tmp &= ~NFC_SP_EN;
-	writew(tmp, &host->regs->config1);
+	tmp = readnfc(&host->regs->config1);
+	tmp &= ~NFC_CONFIG1_SP_EN;
+	writenfc(tmp, &host->regs->config1);
 
-	writew(NFC_ID, &host->regs->config2);
+	writenfc(NFC_ID, &host->regs->operation);
 
 	/* Wait for operation to complete */
 	wait_op_done(host, TROP_US_DELAY, 0);
@@ -292,14 +292,14 @@ static uint16_t get_dev_status(struct mxc_nand_host *host)
 	/* store the main area1 first word, later do recovery */
 	store = readl(main_buf);
 	/* NANDFC buffer 1 is used for device status */
-	writew(1, &host->regs->buf_addr);
+	writenfc(1, &host->regs->buf_addr);
 
 	/* Read status into main buffer */
-	tmp = readw(&host->regs->config1);
-	tmp &= ~NFC_SP_EN;
-	writew(tmp, &host->regs->config1);
+	tmp = readnfc(&host->regs->config1);
+	tmp &= ~NFC_CONFIG1_SP_EN;
+	writenfc(tmp, &host->regs->config1);
 
-	writew(NFC_STATUS, &host->regs->config2);
+	writenfc(NFC_STATUS, &host->regs->operation);
 
 	/* Wait for operation to complete */
 	wait_op_done(host, TROP_US_DELAY, 0);
@@ -328,13 +328,13 @@ static void _mxc_nand_enable_hwecc(struct mtd_info *mtd, int on)
 {
 	struct nand_chip *nand_chip = mtd->priv;
 	struct mxc_nand_host *host = nand_chip->priv;
-	uint16_t tmp = readw(&host->regs->config1);
+	uint16_t tmp = readnfc(&host->regs->config1);
 
 	if (on)
-		tmp |= NFC_ECC_EN;
+		tmp |= NFC_V1_V2_CONFIG1_ECC_EN;
 	else
-		tmp &= ~NFC_ECC_EN;
-	writew(tmp, &host->regs->config1);
+		tmp &= ~NFC_V1_V2_CONFIG1_ECC_EN;
+	writenfc(tmp, &host->regs->config1);
 }
 
 #ifdef CONFIG_MXC_NAND_HWECC
@@ -667,7 +667,7 @@ static int mxc_nand_correct_data(struct mtd_info *mtd, u_char *dat,
 	 * additional correction.  2-Bit errors cannot be corrected by
 	 * HW ECC, so we need to return failure
 	 */
-	uint16_t ecc_status = readw(&host->regs->ecc_status_result);
+	uint16_t ecc_status = readnfc(&host->regs->ecc_status_result);
 
 	if (((ecc_status & 0x3) == 2) || ((ecc_status >> 2) == 2)) {
 		MTDDEBUG(MTD_DEBUG_LEVEL0,
@@ -1210,24 +1210,24 @@ int board_nand_init(struct nand_chip *this)
 #endif
 
 #ifdef MXC_NFC_V2_1
-	tmp = readw(&host->regs->config1);
-	tmp |= NFC_ONE_CYCLE;
-	tmp |= NFC_4_8N_ECC;
-	writew(tmp, &host->regs->config1);
+	tmp = readnfc(&host->regs->config1);
+	tmp |= NFC_V2_CONFIG1_ONE_CYCLE;
+	tmp |= NFC_V2_CONFIG1_ECC_MODE_4;
+	writenfc(tmp, &host->regs->config1);
 	if (host->pagesize_2k)
-		writew(64/2, &host->regs->spare_area_size);
+		writenfc(64/2, &host->regs->spare_area_size);
 	else
-		writew(16/2, &host->regs->spare_area_size);
+		writenfc(16/2, &host->regs->spare_area_size);
 #endif
 
 	/*
 	 * preset operation
 	 * Unlock the internal RAM Buffer
 	 */
-	writew(0x2, &host->regs->config);
+	writenfc(0x2, &host->regs->config);
 
 	/* Blocks to be unlocked */
-	writew(0x0, &host->regs->unlockstart_blkaddr);
+	writenfc(0x0, &host->regs->unlockstart_blkaddr);
 	/* Originally (Freescale LTIB 2.6.21) 0x4000 was written to the
 	 * unlockend_blkaddr, but the magic 0x4000 does not always work
 	 * when writing more than some 32 megabytes (on 2k page nands)
@@ -1239,10 +1239,10 @@ int board_nand_init(struct nand_chip *this)
 	 * This might be NAND chip specific and the i.MX31 datasheet is
 	 * extremely vague about the semantics of this register.
 	 */
-	writew(0xFFFF, &host->regs->unlockend_blkaddr);
+	writenfc(0xFFFF, &host->regs->unlockend_blkaddr);
 
 	/* Unlock Block Command for given address range */
-	writew(0x4, &host->regs->wrprot);
+	writenfc(0x4, &host->regs->wrprot);
 
 	return 0;
 }
diff --git a/include/fsl_nfc.h b/include/fsl_nfc.h
index ff537b4..013e9e2 100644
--- a/include/fsl_nfc.h
+++ b/include/fsl_nfc.h
@@ -113,58 +113,38 @@ struct fsl_nfc_regs {
 #endif
 };
 
-/*
- * Set INT to 0, FCMD to 1, rest to 0 in NFC_CONFIG2 Register for Command
- * operation
- */
-#define NFC_CMD		0x1
+/* Set FCMD to 1, rest to 0 for Command operation */
+#define NFC_CMD				0x1
 
-/*
- * Set INT to 0, FADD to 1, rest to 0 in NFC_CONFIG2 Register for Address
- * operation
- */
-#define NFC_ADDR	0x2
+/* Set FADD to 1, rest to 0 for Address operation */
+#define NFC_ADDR			0x2
 
-/*
- * Set INT to 0, FDI to 1, rest to 0 in NFC_CONFIG2 Register for Input
- * operation
- */
-#define NFC_INPUT	0x4
+/* Set FDI to 1, rest to 0 for Input operation */
+#define NFC_INPUT			0x4
 
-/*
- * Set INT to 0, FDO to 001, rest to 0 in NFC_CONFIG2 Register for Data
- * Output operation
- */
-#define NFC_OUTPUT	0x8
+/* Set FDO to 001, rest to 0 for Data Output operation */
+#define NFC_OUTPUT			0x8
 
-/*
- * Set INT to 0, FD0 to 010, rest to 0 in NFC_CONFIG2 Register for Read ID
- * operation
- */
-#define NFC_ID		0x10
+/* Set FDO to 010, rest to 0 for Read ID operation */
+#define NFC_ID				0x10
 
-/*
- * Set INT to 0, FDO to 100, rest to 0 in NFC_CONFIG2 Register for Read
- * Status operation
- */
-#define NFC_STATUS	0x20
+/* Set FDO to 100, rest to 0 for Read Status operation */
+#define NFC_STATUS			0x20
 
-/*
- * Set INT to 1, rest to 0 in NFC_CONFIG2 Register for Read Status
- * operation
- */
-#define NFC_INT		0x8000
+#define NFC_CONFIG1_SP_EN		(1 << 2)
+#define NFC_CONFIG1_RST			(1 << 6)
+#define NFC_CONFIG1_CE			(1 << 7)
+#define NFC_V1_V2_CONFIG1_ECC_EN	(1 << 3)
+#define NFC_V1_V2_CONFIG1_INT_MSK	(1 << 4)
+#define NFC_V1_V2_CONFIG1_BIG		(1 << 5)
+#define NFC_V2_CONFIG1_ECC_MODE_4	(1 << 0)
+#define NFC_V2_CONFIG1_ONE_CYCLE	(1 << 8)
+#define NFC_V2_CONFIG1_FP_INT		(1 << 11)
 
-#ifdef MXC_NFC_V2_1
-#define NFC_4_8N_ECC	(1 << 0)
-#endif
-#define NFC_SP_EN	(1 << 2)
-#define NFC_ECC_EN	(1 << 3)
-#define NFC_INT_MSK	(1 << 4)
-#define NFC_BIG		(1 << 5)
-#define NFC_RST		(1 << 6)
-#define NFC_CE		(1 << 7)
-#define NFC_ONE_CYCLE	(1 << 8)
-#define NFC_FP_INT	(1 << 11)
+#define NFC_V1_V2_CONFIG2_INT		(1 << 15)
+
+#define operation	config2
+#define readnfc		readw
+#define writenfc	writew
 
 #endif /* __FSL_NFC_H */
diff --git a/nand_spl/nand_boot_fsl_nfc.c b/nand_spl/nand_boot_fsl_nfc.c
index a40c998..615e820 100644
--- a/nand_spl/nand_boot_fsl_nfc.c
+++ b/nand_spl/nand_boot_fsl_nfc.c
@@ -36,13 +36,13 @@ static void nfc_wait_ready(void)
 {
 	uint32_t tmp;
 
-	while (!(readw(&nfc->config2) & NFC_INT))
+	while (!(readnfc(&nfc->config2) & NFC_V1_V2_CONFIG2_INT))
 		;
 
 	/* Reset interrupt flag */
-	tmp = readw(&nfc->config2);
-	tmp &= ~NFC_INT;
-	writew(tmp, &nfc->config2);
+	tmp = readnfc(&nfc->config2);
+	tmp &= ~NFC_V1_V2_CONFIG2_INT;
+	writenfc(tmp, &nfc->config2);
 }
 
 static void nfc_nand_init(void)
@@ -51,43 +51,45 @@ static void nfc_nand_init(void)
 	int ecc_per_page = CONFIG_SYS_NAND_PAGE_SIZE / 512;
 	int config1;
 
-	writew(CONFIG_SYS_NAND_SPARE_SIZE / 2, &nfc->spare_area_size);
+	writenfc(CONFIG_SYS_NAND_SPARE_SIZE / 2, &nfc->spare_area_size);
 
 	/* unlocking RAM Buff */
-	writew(0x2, &nfc->config);
+	writenfc(0x2, &nfc->config);
 
 	/* hardware ECC checking and correct */
-	config1 = readw(&nfc->config1) | NFC_ECC_EN | NFC_INT_MSK |
-			NFC_ONE_CYCLE | NFC_FP_INT;
+	config1 = readnfc(&nfc->config1) | NFC_V1_V2_CONFIG1_ECC_EN |
+			NFC_V1_V2_CONFIG1_INT_MSK | NFC_V2_CONFIG1_ONE_CYCLE |
+			NFC_V2_CONFIG1_FP_INT;
 	/*
 	 * if spare size is larger that 16 bytes per 512 byte hunk
 	 * then use 8 symbol correction instead of 4
 	 */
 	if (CONFIG_SYS_NAND_SPARE_SIZE / ecc_per_page > 16)
-		config1 &= ~NFC_4_8N_ECC;
+		config1 &= ~NFC_V2_CONFIG1_ECC_MODE_4;
 	else
-		config1 |= NFC_4_8N_ECC;
-	writew(config1, &nfc->config1);
+		config1 |= NFC_V2_CONFIG1_ECC_MODE_4;
+	writenfc(config1, &nfc->config1);
 #elif defined(MXC_NFC_V1)
 	/* unlocking RAM Buff */
-	writew(0x2, &nfc->config);
+	writenfc(0x2, &nfc->config);
 
 	/* hardware ECC checking and correct */
-	writew(NFC_ECC_EN | NFC_INT_MSK, &nfc->config1);
+	writenfc(NFC_V1_V2_CONFIG1_ECC_EN | NFC_V1_V2_CONFIG1_INT_MSK,
+			&nfc->config1);
 #endif
 }
 
 static void nfc_nand_command(unsigned short command)
 {
-	writew(command, &nfc->flash_cmd);
-	writew(NFC_CMD, &nfc->config2);
+	writenfc(command, &nfc->flash_cmd);
+	writenfc(NFC_CMD, &nfc->operation);
 	nfc_wait_ready();
 }
 
 static void nfc_nand_address(unsigned short address)
 {
-	writew(address, &nfc->flash_addr);
-	writew(NFC_ADDR, &nfc->config2);
+	writenfc(address, &nfc->flash_addr);
+	writenfc(NFC_ADDR, &nfc->operation);
 	nfc_wait_ready();
 }
 
@@ -121,8 +123,8 @@ static void nfc_nand_data_output(void)
 	int i;
 #endif
 
-	writew(0, &nfc->buf_addr);
-	writew(NFC_OUTPUT, &nfc->config2);
+	writenfc(0, &nfc->buf_addr);
+	writenfc(NFC_OUTPUT, &nfc->operation);
 	nfc_wait_ready();
 #ifdef NAND_MXC_2K_MULTI_CYCLE
 	/*
@@ -130,8 +132,8 @@ static void nfc_nand_data_output(void)
 	 * for pages larger than 512 bytes.
 	 */
 	for (i = 1; i < CONFIG_SYS_NAND_PAGE_SIZE / 512; i++) {
-		writew(i, &nfc->buf_addr);
-		writew(NFC_OUTPUT, &nfc->config2);
+		writenfc(i, &nfc->buf_addr);
+		writenfc(NFC_OUTPUT, &nfc->operation);
 		nfc_wait_ready();
 	}
 #endif
@@ -160,7 +162,8 @@ static int nfc_nand_check_ecc(void)
 
 static void nfc_nand_read_page(unsigned int page_address)
 {
-	writew(0, &nfc->buf_addr); /* read in first 0 buffer */
+	/* read in first 0 buffer */
+	writenfc(0, &nfc->buf_addr);
 	nfc_nand_command(NAND_CMD_READ0);
 	nfc_nand_page_address(page_address);