net: Adds Fast Ethernet Controller driver for Armada100

This patch adds support for Fast Ethernet Controller driver for
Armada100 series.

Signed-off-by: Ajay Bhargav <ajay.bhargav@einfochips.com>
Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>

5 files changed, 971 insertions, 0 deletions

diff --git a/arch/arm/include/asm/arch-armada100/armada100.h b/arch/arm/include/asm/arch-armada100/armada100.h
index d5d125a..9b9ed16 100644
--- a/arch/arm/include/asm/arch-armada100/armada100.h
+++ b/arch/arm/include/asm/arch-armada100/armada100.h
@@ -43,6 +43,7 @@
 
 /* Register Base Addresses */
 #define ARMD1_DRAM_BASE		0xB0000000
+#define ARMD1_FEC_BASE		0xC0800000
 #define ARMD1_TIMER_BASE	0xD4014000
 #define ARMD1_APBC1_BASE	0xD4015000
 #define ARMD1_APBC2_BASE	0xD4015800
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 819b197..34b4322 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -28,6 +28,7 @@ LIB	:= $(obj)libnet.o
 COBJS-$(CONFIG_DRIVER_3C589) += 3c589.o
 COBJS-$(CONFIG_PPC4xx_EMAC) += 4xx_enet.o
 COBJS-$(CONFIG_ALTERA_TSE) += altera_tse.o
+COBJS-$(CONFIG_ARMADA100_FEC) += armada100_fec.o
 COBJS-$(CONFIG_DRIVER_AT91EMAC) += at91_emac.o
 COBJS-$(CONFIG_DRIVER_AX88180) += ax88180.o
 COBJS-$(CONFIG_BCM570x) += bcm570x.o
diff --git a/drivers/net/armada100_fec.c b/drivers/net/armada100_fec.c
new file mode 100644
index 0000000..fbf9763
--- /dev/null
+++ b/drivers/net/armada100_fec.c
@@ -0,0 +1,736 @@
+/*
+ * (C) Copyright 2011
+ * eInfochips Ltd. <www.einfochips.com>
+ * Written-by: Ajay Bhargav <ajay.bhargav@einfochips.com>
+ *
+ * (C) Copyright 2010
+ * Marvell Semiconductor <www.marvell.com>
+ * Contributor: Mahavir Jain <mjain@marvell.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#include <common.h>
+#include <net.h>
+#include <malloc.h>
+#include <miiphy.h>
+#include <netdev.h>
+#include <asm/types.h>
+#include <asm/byteorder.h>
+#include <linux/err.h>
+#include <linux/mii.h>
+#include <asm/io.h>
+#include <asm/arch/armada100.h>
+#include "armada100_fec.h"
+
+#define  PHY_ADR_REQ     0xFF	/* Magic number to read/write PHY address */
+
+#ifdef DEBUG
+static int eth_dump_regs(struct eth_device *dev)
+{
+	struct armdfec_device *darmdfec = to_darmdfec(dev);
+	struct armdfec_reg *regs = darmdfec->regs;
+	unsigned int i = 0;
+
+	printf("\noffset: phy_adr, value: 0x%x\n", readl(&regs->phyadr));
+	printf("offset: smi, value: 0x%x\n", readl(&regs->smi));
+	for (i = 0x400; i <= 0x4e4; i += 4)
+		printf("offset: 0x%x, value: 0x%x\n",
+			i, readl(ARMD1_FEC_BASE + i));
+	return 0;
+}
+#endif
+
+static int armdfec_phy_timeout(u32 *reg, u32 flag, int cond)
+{
+	u32 timeout = PHY_WAIT_ITERATIONS;
+	u32 reg_val;
+
+	while (--timeout) {
+		reg_val = readl(reg);
+		if (cond && (reg_val & flag))
+			break;
+		else if (!cond && !(reg_val & flag))
+			break;
+		udelay(PHY_WAIT_MICRO_SECONDS);
+	}
+	return !timeout;
+}
+
+static int smi_reg_read(const char *devname, u8 phy_addr, u8 phy_reg,
+			u16 *value)
+{
+	struct eth_device *dev = eth_get_dev_by_name(devname);
+	struct armdfec_device *darmdfec = to_darmdfec(dev);
+	struct armdfec_reg *regs = darmdfec->regs;
+	u32 val;
+
+	if (phy_addr == PHY_ADR_REQ && phy_reg == PHY_ADR_REQ) {
+		val = readl(&regs->phyadr);
+		*value = val & 0x1f;
+		return 0;
+	}
+
+	/* check parameters */
+	if (phy_addr > PHY_MASK) {
+		printf("ARMD100 FEC: (%s) Invalid phy address: 0x%X\n",
+				__func__, phy_addr);
+		return -EINVAL;
+	}
+	if (phy_reg > PHY_MASK) {
+		printf("ARMD100 FEC: (%s) Invalid register offset: 0x%X\n",
+				__func__, phy_reg);
+		return -EINVAL;
+	}
+
+	/* wait for the SMI register to become available */
+	if (armdfec_phy_timeout(&regs->smi, SMI_BUSY, FALSE)) {
+		printf("ARMD100 FEC: (%s) PHY busy timeout\n",	__func__);
+		return -1;
+	}
+
+	writel((phy_addr << 16) | (phy_reg << 21) | SMI_OP_R, &regs->smi);
+
+	/* now wait for the data to be valid */
+	if (armdfec_phy_timeout(&regs->smi, SMI_R_VALID, TRUE)) {
+		val = readl(&regs->smi);
+		printf("ARMD100 FEC: (%s) PHY Read timeout, val=0x%x\n",
+				__func__, val);
+		return -1;
+	}
+	val = readl(&regs->smi);
+	*value = val & 0xffff;
+
+	return 0;
+}
+
+static int smi_reg_write(const char *devname,
+	 u8 phy_addr, u8 phy_reg, u16 value)
+{
+	struct eth_device *dev = eth_get_dev_by_name(devname);
+	struct armdfec_device *darmdfec = to_darmdfec(dev);
+	struct armdfec_reg *regs = darmdfec->regs;
+
+	if (phy_addr == PHY_ADR_REQ && phy_reg == PHY_ADR_REQ) {
+		clrsetbits_le32(&regs->phyadr, 0x1f, value & 0x1f);
+		return 0;
+	}
+
+	/* check parameters */
+	if (phy_addr > PHY_MASK) {
+		printf("ARMD100 FEC: (%s) Invalid phy address\n", __func__);
+		return -EINVAL;
+	}
+	if (phy_reg > PHY_MASK) {
+		printf("ARMD100 FEC: (%s) Invalid register offset\n", __func__);
+		return -EINVAL;
+	}
+
+	/* wait for the SMI register to become available */
+	if (armdfec_phy_timeout(&regs->smi, SMI_BUSY, FALSE)) {
+		printf("ARMD100 FEC: (%s) PHY busy timeout\n",	__func__);
+		return -1;
+	}
+
+	writel((phy_addr << 16) | (phy_reg << 21) | SMI_OP_W | (value & 0xffff),
+			&regs->smi);
+	return 0;
+}
+
+/*
+ * Abort any transmit and receive operations and put DMA
+ * in idle state. AT and AR bits are cleared upon entering
+ * in IDLE state. So poll those bits to verify operation.
+ */
+static void abortdma(struct eth_device *dev)
+{
+	struct armdfec_device *darmdfec = to_darmdfec(dev);
+	struct armdfec_reg *regs = darmdfec->regs;
+	int delay;
+	int maxretries = 40;
+	u32 tmp;
+
+	while (--maxretries) {
+		writel(SDMA_CMD_AR | SDMA_CMD_AT, &regs->sdma_cmd);
+		udelay(100);
+
+		delay = 10;
+		while (--delay) {
+			tmp = readl(&regs->sdma_cmd);
+			if (!(tmp & (SDMA_CMD_AR | SDMA_CMD_AT)))
+				break;
+			udelay(10);
+		}
+		if (delay)
+			break;
+	}
+
+	if (!maxretries)
+		printf("ARMD100 FEC: (%s) DMA Stuck\n", __func__);
+}
+
+static inline u32 nibble_swapping_32_bit(u32 x)
+{
+	return ((x & 0xf0f0f0f0) >> 4) | ((x & 0x0f0f0f0f) << 4);
+}
+
+static inline u32 nibble_swapping_16_bit(u32 x)
+{
+	return ((x & 0x0000f0f0) >> 4) | ((x & 0x00000f0f) << 4);
+}
+
+static inline u32 flip_4_bits(u32 x)
+{
+	return ((x & 0x01) << 3) | ((x & 0x002) << 1)
+		| ((x & 0x04) >> 1) | ((x & 0x008) >> 3);
+}
+
+/*
+ * This function will calculate the hash function of the address.
+ * depends on the hash mode and hash size.
+ * Inputs
+ * mach             - the 2 most significant bytes of the MAC address.
+ * macl             - the 4 least significant bytes of the MAC address.
+ * Outputs
+ * return the calculated entry.
+ */
+static u32 hash_function(u32 mach, u32 macl)
+{
+	u32 hashresult;
+	u32 addrh;
+	u32 addrl;
+	u32 addr0;
+	u32 addr1;
+	u32 addr2;
+	u32 addr3;
+	u32 addrhswapped;
+	u32 addrlswapped;
+
+	addrh = nibble_swapping_16_bit(mach);
+	addrl = nibble_swapping_32_bit(macl);
+
+	addrhswapped = flip_4_bits(addrh & 0xf)
+		+ ((flip_4_bits((addrh >> 4) & 0xf)) << 4)
+		+ ((flip_4_bits((addrh >> 8) & 0xf)) << 8)
+		+ ((flip_4_bits((addrh >> 12) & 0xf)) << 12);
+
+	addrlswapped = flip_4_bits(addrl & 0xf)
+		+ ((flip_4_bits((addrl >> 4) & 0xf)) << 4)
+		+ ((flip_4_bits((addrl >> 8) & 0xf)) << 8)
+		+ ((flip_4_bits((addrl >> 12) & 0xf)) << 12)
+		+ ((flip_4_bits((addrl >> 16) & 0xf)) << 16)
+		+ ((flip_4_bits((addrl >> 20) & 0xf)) << 20)
+		+ ((flip_4_bits((addrl >> 24) & 0xf)) << 24)
+		+ ((flip_4_bits((addrl >> 28) & 0xf)) << 28);
+
+	addrh = addrhswapped;
+	addrl = addrlswapped;
+
+	addr0 = (addrl >> 2) & 0x03f;
+	addr1 = (addrl & 0x003) | (((addrl >> 8) & 0x7f) << 2);
+	addr2 = (addrl >> 15) & 0x1ff;
+	addr3 = ((addrl >> 24) & 0x0ff) | ((addrh & 1) << 8);
+
+	hashresult = (addr0 << 9) | (addr1 ^ addr2 ^ addr3);
+	hashresult = hashresult & 0x07ff;
+	return hashresult;
+}
+
+/*
+ * This function will add an entry to the address table.
+ * depends on the hash mode and hash size that was initialized.
+ * Inputs
+ * mach - the 2 most significant bytes of the MAC address.
+ * macl - the 4 least significant bytes of the MAC address.
+ * skip - if 1, skip this address.
+ * rd   - the RD field in the address table.
+ * Outputs
+ * address table entry is added.
+ * 0 if success.
+ * -ENOSPC if table full
+ */
+static int add_del_hash_entry(struct armdfec_device *darmdfec, u32 mach,
+			      u32 macl, u32 rd, u32 skip, int del)
+{
+	struct addr_table_entry_t *entry, *start;
+	u32 newhi;
+	u32 newlo;
+	u32 i;
+
+	newlo = (((mach >> 4) & 0xf) << 15)
+		| (((mach >> 0) & 0xf) << 11)
+		| (((mach >> 12) & 0xf) << 7)
+		| (((mach >> 8) & 0xf) << 3)
+		| (((macl >> 20) & 0x1) << 31)
+		| (((macl >> 16) & 0xf) << 27)
+		| (((macl >> 28) & 0xf) << 23)
+		| (((macl >> 24) & 0xf) << 19)
+		| (skip << HTESKIP) | (rd << HTERDBIT)
+		| HTEVALID;
+
+	newhi = (((macl >> 4) & 0xf) << 15)
+		| (((macl >> 0) & 0xf) << 11)
+		| (((macl >> 12) & 0xf) << 7)
+		| (((macl >> 8) & 0xf) << 3)
+		| (((macl >> 21) & 0x7) << 0);
+
+	/*
+	 * Pick the appropriate table, start scanning for free/reusable
+	 * entries at the index obtained by hashing the specified MAC address
+	 */
+	start = (struct addr_table_entry_t *)(darmdfec->htpr);
+	entry = start + hash_function(mach, macl);
+	for (i = 0; i < HOP_NUMBER; i++) {
+		if (!(entry->lo & HTEVALID)) {
+			break;
+		} else {
+			/* if same address put in same position */
+			if (((entry->lo & 0xfffffff8) == (newlo & 0xfffffff8))
+					&& (entry->hi == newhi))
+				break;
+		}
+		if (entry == start + 0x7ff)
+			entry = start;
+		else
+			entry++;
+	}
+
+	if (((entry->lo & 0xfffffff8) != (newlo & 0xfffffff8)) &&
+		(entry->hi != newhi) && del)
+		return 0;
+
+	if (i == HOP_NUMBER) {
+		if (!del) {
+			printf("ARMD100 FEC: (%s) table section is full\n",
+					__func__);
+			return -ENOSPC;
+		} else {
+			return 0;
+		}
+	}
+
+	/*
+	 * Update the selected entry
+	 */
+	if (del) {
+		entry->hi = 0;
+		entry->lo = 0;
+	} else {
+		entry->hi = newhi;
+		entry->lo = newlo;
+	}
+
+	return 0;
+}
+
+/*
+ *  Create an addressTable entry from MAC address info
+ *  found in the specifed net_device struct
+ *
+ *  Input : pointer to ethernet interface network device structure
+ *  Output : N/A
+ */
+static void update_hash_table_mac_address(struct armdfec_device *darmdfec,
+					  u8 *oaddr, u8 *addr)
+{
+	u32 mach;
+	u32 macl;
+
+	/* Delete old entry */
+	if (oaddr) {
+		mach = (oaddr[0] << 8) | oaddr[1];
+		macl = (oaddr[2] << 24) | (oaddr[3] << 16) |
+			(oaddr[4] << 8) | oaddr[5];
+		add_del_hash_entry(darmdfec, mach, macl, 1, 0, HASH_DELETE);
+	}
+
+	/* Add new entry */
+	mach = (addr[0] << 8) | addr[1];
+	macl = (addr[2] << 24) | (addr[3] << 16) | (addr[4] << 8) | addr[5];
+	add_del_hash_entry(darmdfec, mach, macl, 1, 0, HASH_ADD);
+}
+
+/* Address Table Initialization */
+static void init_hashtable(struct eth_device *dev)
+{
+	struct armdfec_device *darmdfec = to_darmdfec(dev);
+	struct armdfec_reg *regs = darmdfec->regs;
+	memset(darmdfec->htpr, 0, HASH_ADDR_TABLE_SIZE);
+	writel((u32)darmdfec->htpr, &regs->htpr);
+}
+
+/*
+ * This detects PHY chip from address 0-31 by reading PHY status
+ * registers. PHY chip can be connected at any of this address.
+ */
+static int ethernet_phy_detect(struct eth_device *dev)
+{
+	u32 val;
+	u16 tmp, mii_status;
+	u8 addr;
+
+	for (addr = 0; addr < 32; addr++) {
+		if (miiphy_read(dev->name, addr, MII_BMSR, &mii_status)	!= 0)
+			/* try next phy */
+			continue;
+
+		/* invalid MII status. More validation required here... */
+		if (mii_status == 0 || mii_status == 0xffff)
+			/* try next phy */
+			continue;
+
+		if (miiphy_read(dev->name, addr, MII_PHYSID1, &tmp) != 0)
+			/* try next phy */
+			continue;
+
+		val = tmp << 16;
+		if (miiphy_read(dev->name, addr, MII_PHYSID2, &tmp) != 0)
+			/* try next phy */
+			continue;
+
+		val |= tmp;
+
+		if ((val & 0xfffffff0) != 0)
+			return addr;
+	}
+	return -1;
+}
+
+static void armdfec_init_rx_desc_ring(struct armdfec_device *darmdfec)
+{
+	struct rx_desc *p_rx_desc;
+	int i;
+
+	/* initialize the Rx descriptors ring */
+	p_rx_desc = darmdfec->p_rxdesc;
+	for (i = 0; i < RINGSZ; i++) {
+		p_rx_desc->cmd_sts = BUF_OWNED_BY_DMA | RX_EN_INT;
+		p_rx_desc->buf_size = PKTSIZE_ALIGN;
+		p_rx_desc->byte_cnt = 0;
+		p_rx_desc->buf_ptr = darmdfec->p_rxbuf + i * PKTSIZE_ALIGN;
+		if (i == (RINGSZ - 1)) {
+			p_rx_desc->nxtdesc_p = darmdfec->p_rxdesc;
+		} else {
+			p_rx_desc->nxtdesc_p = (struct rx_desc *)
+			    ((u32)p_rx_desc + ARMDFEC_RXQ_DESC_ALIGNED_SIZE);
+			p_rx_desc = p_rx_desc->nxtdesc_p;
+		}
+	}
+	darmdfec->p_rxdesc_curr = darmdfec->p_rxdesc;
+}
+
+static int armdfec_init(struct eth_device *dev, bd_t *bd)
+{
+	struct armdfec_device *darmdfec = to_darmdfec(dev);
+	struct armdfec_reg *regs = darmdfec->regs;
+	int phy_adr;
+
+	armdfec_init_rx_desc_ring(darmdfec);
+
+	/* Disable interrupts */
+	writel(0, &regs->im);
+	writel(0, &regs->ic);
+	/* Write to ICR to clear interrupts. */
+	writel(0, &regs->iwc);
+
+	/*
+	 * Abort any transmit and receive operations and put DMA
+	 * in idle state.
+	 */
+	abortdma(dev);
+
+	/* Initialize address hash table */
+	init_hashtable(dev);
+
+	/* SDMA configuration */
+	writel(SDCR_BSZ8 |	/* Burst size = 32 bytes */
+		SDCR_RIFB |	/* Rx interrupt on frame */
+		SDCR_BLMT |	/* Little endian transmit */
+		SDCR_BLMR |	/* Little endian receive */
+		SDCR_RC_MAX_RETRANS,	/* Max retransmit count */
+		&regs->sdma_conf);
+	/* Port Configuration */
+	writel(PCR_HS, &regs->pconf);	/* Hash size is 1/2kb */
+
+	/* Set extended port configuration */
+	writel(PCXR_2BSM |		/* Two byte suffix aligns IP hdr */
+		PCXR_DSCP_EN |		/* Enable DSCP in IP */
+		PCXR_MFL_1536 |		/* Set MTU = 1536 */
+		PCXR_FLP |		/* do not force link pass */
+		PCXR_TX_HIGH_PRI,	/* Transmit - high priority queue */
+		&regs->pconf_ext);
+
+	update_hash_table_mac_address(darmdfec, NULL, dev->enetaddr);
+
+	/* Update TX and RX queue descriptor register */
+	writel((u32)darmdfec->p_txdesc, &regs->txcdp[TXQ]);
+	writel((u32)darmdfec->p_rxdesc, &regs->rxfdp[RXQ]);
+	writel((u32)darmdfec->p_rxdesc_curr, &regs->rxcdp[RXQ]);
+
+	/* Enable Interrupts */
+	writel(ALL_INTS, &regs->im);
+
+	/* Enable Ethernet Port */
+	setbits_le32(&regs->pconf, PCR_EN);
+
+	/* Enable RX DMA engine */
+	setbits_le32(&regs->sdma_cmd, SDMA_CMD_ERD);
+
+#ifdef DEBUG
+	eth_dump_regs(dev);
+#endif
+
+#if (defined(CONFIG_MII) || defined(CONFIG_CMD_MII))
+
+#if defined(CONFIG_PHY_BASE_ADR)
+	miiphy_write(dev->name, PHY_ADR_REQ, PHY_ADR_REQ, CONFIG_PHY_BASE_ADR);
+#else
+	/* Search phy address from range 0-31 */
+	phy_adr = ethernet_phy_detect(dev);
+	if (phy_adr < 0) {
+		printf("ARMD100 FEC: PHY not detected at address range 0-31\n");
+		return -1;
+	} else {
+		debug("ARMD100 FEC: PHY detected at addr %d\n", phy_adr);
+		miiphy_write(dev->name, PHY_ADR_REQ, PHY_ADR_REQ, phy_adr);
+	}
+#endif
+
+#if defined(CONFIG_SYS_FAULT_ECHO_LINK_DOWN)
+	/* Wait up to 5s for the link status */
+	for (i = 0; i < 5; i++) {
+		u16 phy_adr;
+
+		miiphy_read(dev->name, 0xFF, 0xFF, &phy_adr);
+		/* Return if we get link up */
+		if (miiphy_link(dev->name, phy_adr))
+			return 0;
+		udelay(1000000);
+	}
+
+	printf("ARMD100 FEC: No link on %s\n", dev->name);
+	return -1;
+#endif
+#endif
+	return 0;
+}
+
+static void armdfec_halt(struct eth_device *dev)
+{
+	struct armdfec_device *darmdfec = to_darmdfec(dev);
+	struct armdfec_reg *regs = darmdfec->regs;
+
+	/* Stop RX DMA */
+	clrbits_le32(&regs->sdma_cmd, SDMA_CMD_ERD);
+
+	/*
+	 * Abort any transmit and receive operations and put DMA
+	 * in idle state.
+	 */
+	abortdma(dev);
+
+	/* Disable interrupts */
+	writel(0, &regs->im);
+	writel(0, &regs->ic);
+	writel(0, &regs->iwc);
+
+	/* Disable Port */
+	clrbits_le32(&regs->pconf, PCR_EN);
+}
+
+static int armdfec_send(struct eth_device *dev, volatile void *dataptr,
+		    int datasize)
+{
+	struct armdfec_device *darmdfec = to_darmdfec(dev);
+	struct armdfec_reg *regs = darmdfec->regs;
+	struct tx_desc *p_txdesc = darmdfec->p_txdesc;
+	void *p = (void *)dataptr;
+	int retry = PHY_WAIT_ITERATIONS * PHY_WAIT_MICRO_SECONDS;
+	u32 cmd_sts;
+
+	/* Copy buffer if it's misaligned */
+	if ((u32)dataptr & 0x07) {
+		if (datasize > PKTSIZE_ALIGN) {
+			printf("ARMD100 FEC: Non-aligned data too large (%d)\n",
+					datasize);
+			return -1;
+		}
+		memcpy(darmdfec->p_aligned_txbuf, p, datasize);
+		p = darmdfec->p_aligned_txbuf;
+	}
+
+	p_txdesc->cmd_sts = TX_ZERO_PADDING | TX_GEN_CRC;
+	p_txdesc->cmd_sts |= TX_FIRST_DESC | TX_LAST_DESC;
+	p_txdesc->cmd_sts |= BUF_OWNED_BY_DMA;
+	p_txdesc->cmd_sts |= TX_EN_INT;
+	p_txdesc->buf_ptr = p;
+	p_txdesc->byte_cnt = datasize;
+
+	/* Apply send command using high priority TX queue */
+	writel((u32)p_txdesc, &regs->txcdp[TXQ]);
+	writel(SDMA_CMD_TXDL | SDMA_CMD_TXDH | SDMA_CMD_ERD, &regs->sdma_cmd);
+
+	/*
+	 * wait for packet xmit completion
+	 */
+	cmd_sts = readl(&p_txdesc->cmd_sts);
+	while (cmd_sts & BUF_OWNED_BY_DMA) {
+		/* return fail if error is detected */
+		if ((cmd_sts & (TX_ERROR | TX_LAST_DESC)) ==
+			(TX_ERROR | TX_LAST_DESC)) {
+			printf("ARMD100 FEC: (%s) in xmit packet\n", __func__);
+			return -1;
+		}
+		cmd_sts = readl(&p_txdesc->cmd_sts);
+		if (!(retry--)) {
+			printf("ARMD100 FEC: (%s) xmit packet timeout!\n",
+					__func__);
+			return -1;
+		}
+	}
+
+	return 0;
+}
+
+static int armdfec_recv(struct eth_device *dev)
+{
+	struct armdfec_device *darmdfec = to_darmdfec(dev);
+	struct rx_desc *p_rxdesc_curr = darmdfec->p_rxdesc_curr;
+	u32 cmd_sts;
+	u32 timeout = 0;
+
+	/* wait untill rx packet available or timeout */
+	do {
+		if (timeout < PHY_WAIT_ITERATIONS * PHY_WAIT_MICRO_SECONDS) {
+			timeout++;
+		} else {
+			debug("ARMD100 FEC: %s time out...\n", __func__);
+			return -1;
+		}
+	} while (readl(&p_rxdesc_curr->cmd_sts) & BUF_OWNED_BY_DMA);
+
+	if (p_rxdesc_curr->byte_cnt != 0) {
+		debug("ARMD100 FEC: %s: Received %d byte Packet @ 0x%x"
+				"(cmd_sts= %08x)\n", __func__,
+				(u32)p_rxdesc_curr->byte_cnt,
+				(u32)p_rxdesc_curr->buf_ptr,
+				(u32)p_rxdesc_curr->cmd_sts);
+	}
+
+	/*
+	 * In case received a packet without first/last bits on
+	 * OR the error summary bit is on,
+	 * the packets needs to be dropeed.
+	 */
+	cmd_sts = readl(&p_rxdesc_curr->cmd_sts);
+
+	if ((cmd_sts & (RX_FIRST_DESC | RX_LAST_DESC)) !=
+			(RX_FIRST_DESC | RX_LAST_DESC)) {
+		printf("ARMD100 FEC: (%s) Dropping packet spread on"
+			" multiple descriptors\n", __func__);
+	} else if (cmd_sts & RX_ERROR) {
+		printf("ARMD100 FEC: (%s) Dropping packet with errors\n",
+				__func__);
+	} else {
+		/* !!! call higher layer processing */
+		debug("ARMD100 FEC: (%s) Sending Received packet to"
+			" upper layer (NetReceive)\n", __func__);
+
+		/*
+		 * let the upper layer handle the packet, subtract offset
+		 * as two dummy bytes are added in received buffer see
+		 * PORT_CONFIG_EXT register bit TWO_Byte_Stuff_Mode bit.
+		 */
+		NetReceive((p_rxdesc_curr->buf_ptr + RX_BUF_OFFSET),
+			   (int)(p_rxdesc_curr->byte_cnt - RX_BUF_OFFSET));
+	}
+	/*
+	 * free these descriptors and point next in the ring
+	 */
+	p_rxdesc_curr->cmd_sts = BUF_OWNED_BY_DMA | RX_EN_INT;
+	p_rxdesc_curr->buf_size = PKTSIZE_ALIGN;
+	p_rxdesc_curr->byte_cnt = 0;
+
+	writel((u32)p_rxdesc_curr->nxtdesc_p, (u32)&darmdfec->p_rxdesc_curr);
+
+	return 0;
+}
+
+int armada100_fec_register(unsigned long base_addr)
+{
+	struct armdfec_device *darmdfec;
+	struct eth_device *dev;
+
+	darmdfec = malloc(sizeof(struct armdfec_device));
+	if (!darmdfec)
+		goto error;
+
+	memset(darmdfec, 0, sizeof(struct armdfec_device));
+
+	darmdfec->htpr = memalign(8, HASH_ADDR_TABLE_SIZE);
+	if (!darmdfec->htpr)
+		goto error1;
+
+	darmdfec->p_rxdesc = memalign(PKTALIGN,
+			ARMDFEC_RXQ_DESC_ALIGNED_SIZE * RINGSZ + 1);
+
+	if (!darmdfec->p_rxdesc)
+		goto error1;
+
+	darmdfec->p_rxbuf = memalign(PKTALIGN, RINGSZ * PKTSIZE_ALIGN + 1);
+	if (!darmdfec->p_rxbuf)
+		goto error1;
+
+	darmdfec->p_aligned_txbuf = memalign(8, PKTSIZE_ALIGN);
+	if (!darmdfec->p_aligned_txbuf)
+		goto error1;
+
+	darmdfec->p_txdesc = memalign(PKTALIGN, sizeof(struct tx_desc) + 1);
+	if (!darmdfec->p_txdesc)
+		goto error1;
+
+	dev = &darmdfec->dev;
+	/* Assign ARMADA100 Fast Ethernet Controller Base Address */
+	darmdfec->regs = (void *)base_addr;
+
+	/* must be less than NAMESIZE (16) */
+	strcpy(dev->name, "armd-fec0");
+
+	dev->init = armdfec_init;
+	dev->halt = armdfec_halt;
+	dev->send = armdfec_send;
+	dev->recv = armdfec_recv;
+
+	eth_register(dev);
+
+#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
+	miiphy_register(dev->name, smi_reg_read, smi_reg_write);
+#endif
+	return 0;
+
+error1:
+	free(darmdfec->p_aligned_txbuf);
+	free(darmdfec->p_rxbuf);
+	free(darmdfec->p_rxdesc);
+	free(darmdfec->htpr);
+error:
+	free(darmdfec);
+	printf("AMD100 FEC: (%s) Failed to allocate memory\n", __func__);
+	return -1;
+}
diff --git a/drivers/net/armada100_fec.h b/drivers/net/armada100_fec.h
new file mode 100644
index 0000000..e2df4fc
--- /dev/null
+++ b/drivers/net/armada100_fec.h
@@ -0,0 +1,232 @@
+/*
+ * (C) Copyright 2011
+ * eInfochips Ltd. <www.einfochips.com>
+ * Written-by: Ajay Bhargav <ajay.bhargav@einfochips.com>
+ *
+ * (C) Copyright 2010
+ * Marvell Semiconductor <www.marvell.com>
+ * Contributor: Mahavir Jain <mjain@marvell.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#ifndef __ARMADA100_FEC_H__
+#define __ARMADA100_FEC_H__
+
+#ifndef TRUE
+#define TRUE 1
+#endif
+#ifndef FALSE
+#define FALSE 0
+#endif
+
+#define PORT_NUM		0x0
+
+/* RX & TX descriptor command */
+#define BUF_OWNED_BY_DMA        (1<<31)
+
+/* RX descriptor status */
+#define RX_EN_INT               (1<<23)
+#define RX_FIRST_DESC           (1<<17)
+#define RX_LAST_DESC            (1<<16)
+#define RX_ERROR                (1<<15)
+
+/* TX descriptor command */
+#define TX_EN_INT               (1<<23)
+#define TX_GEN_CRC              (1<<22)
+#define TX_ZERO_PADDING         (1<<18)
+#define TX_FIRST_DESC           (1<<17)
+#define TX_LAST_DESC            (1<<16)
+#define TX_ERROR                (1<<15)
+
+/* smi register */
+#define SMI_BUSY                (1<<28)	/* 0 - Write, 1 - Read  */
+#define SMI_R_VALID             (1<<27)	/* 0 - Write, 1 - Read  */
+#define SMI_OP_W                (0<<26)	/* Write operation      */
+#define SMI_OP_R                (1<<26)	/* Read operation */
+
+#define HASH_ADD                0
+#define HASH_DELETE             1
+#define HASH_ADDR_TABLE_SIZE    0x4000	/* 16K (1/2K address - PCR_HS == 1) */
+#define HOP_NUMBER              12
+
+#define PHY_WAIT_ITERATIONS     1000	/* 1000 iterations * 10uS = 10mS max */
+#define PHY_WAIT_MICRO_SECONDS  10
+
+#define ETH_HW_IP_ALIGN         2	/* hw aligns IP header */
+#define ETH_EXTRA_HEADER        (6+6+2+4)
+					/* dest+src addr+protocol id+crc */
+#define MAX_PKT_SIZE            1536
+
+
+/* Bit definitions of the SDMA Config Reg */
+#define SDCR_BSZ_OFF            12
+#define SDCR_BSZ8               (3<<SDCR_BSZ_OFF)
+#define SDCR_BSZ4               (2<<SDCR_BSZ_OFF)
+#define SDCR_BSZ2               (1<<SDCR_BSZ_OFF)
+#define SDCR_BSZ1               (0<<SDCR_BSZ_OFF)
+#define SDCR_BLMR               (1<<6)
+#define SDCR_BLMT               (1<<7)
+#define SDCR_RIFB               (1<<9)
+#define SDCR_RC_OFF             2
+#define SDCR_RC_MAX_RETRANS     (0xf << SDCR_RC_OFF)
+
+/* SDMA_CMD */
+#define SDMA_CMD_AT             (1<<31)
+#define SDMA_CMD_TXDL           (1<<24)
+#define SDMA_CMD_TXDH           (1<<23)
+#define SDMA_CMD_AR             (1<<15)
+#define SDMA_CMD_ERD            (1<<7)
+
+
+/* Bit definitions of the Port Config Reg */
+#define PCR_HS                  (1<<12)
+#define PCR_EN                  (1<<7)
+#define PCR_PM                  (1<<0)
+
+/* Bit definitions of the Port Config Extend Reg */
+#define PCXR_2BSM               (1<<28)
+#define PCXR_DSCP_EN            (1<<21)
+#define PCXR_MFL_1518           (0<<14)
+#define PCXR_MFL_1536           (1<<14)
+#define PCXR_MFL_2048           (2<<14)
+#define PCXR_MFL_64K            (3<<14)
+#define PCXR_FLP                (1<<11)
+#define PCXR_PRIO_TX_OFF        3
+#define PCXR_TX_HIGH_PRI        (7<<PCXR_PRIO_TX_OFF)
+
+/*
+ *  * Bit definitions of the Interrupt Cause Reg
+ *   * and Interrupt MASK Reg is the same
+ *    */
+#define ICR_RXBUF               (1<<0)
+#define ICR_TXBUF_H             (1<<2)
+#define ICR_TXBUF_L             (1<<3)
+#define ICR_TXEND_H             (1<<6)
+#define ICR_TXEND_L             (1<<7)
+#define ICR_RXERR               (1<<8)
+#define ICR_TXERR_H             (1<<10)
+#define ICR_TXERR_L             (1<<11)
+#define ICR_TX_UDR              (1<<13)
+#define ICR_MII_CH              (1<<28)
+
+#define ALL_INTS (ICR_TXBUF_H  | ICR_TXBUF_L  | ICR_TX_UDR |\
+				ICR_TXERR_H  | ICR_TXERR_L |\
+				ICR_TXEND_H  | ICR_TXEND_L |\
+				ICR_RXBUF | ICR_RXERR  | ICR_MII_CH)
+
+#define PHY_MASK               0x0000001f
+
+#define to_darmdfec(_kd) container_of(_kd, struct armdfec_device, dev)
+/* Size of a Tx/Rx descriptor used in chain list data structure */
+#define ARMDFEC_RXQ_DESC_ALIGNED_SIZE \
+	(((sizeof(struct rx_desc) / PKTALIGN) + 1) * PKTALIGN)
+
+#define RX_BUF_OFFSET		0x2
+#define RXQ			0x0	/* RX Queue 0 */
+#define TXQ			0x1	/* TX Queue 1 */
+
+struct addr_table_entry_t {
+	u32 lo;
+	u32 hi;
+};
+
+/* Bit fields of a Hash Table Entry */
+enum hash_table_entry {
+	HTEVALID = 1,
+	HTESKIP = 2,
+	HTERD = 4,
+	HTERDBIT = 2
+};
+
+struct tx_desc {
+	u32 cmd_sts;		/* Command/status field */
+	u16 reserved;
+	u16 byte_cnt;		/* buffer byte count */
+	u8 *buf_ptr;		/* pointer to buffer for this descriptor */
+	struct tx_desc *nextdesc_p;	/* Pointer to next descriptor */
+};
+
+struct rx_desc {
+	u32 cmd_sts;		/* Descriptor command status */
+	u16 byte_cnt;		/* Descriptor buffer byte count */
+	u16 buf_size;		/* Buffer size */
+	u8 *buf_ptr;		/* Descriptor buffer pointer */
+	struct rx_desc *nxtdesc_p;	/* Next descriptor pointer */
+};
+
+/*
+ * Armada100 Fast Ethernet controller Registers
+ * Refer Datasheet Appendix A.22
+ */
+struct armdfec_reg {
+	u32 phyadr;			/* PHY Address */
+	u32 pad1[3];
+	u32 smi;			/* SMI */
+	u32 pad2[0xFB];
+	u32 pconf;			/* Port configuration */
+	u32 pad3;
+	u32 pconf_ext;			/* Port configuration extend */
+	u32 pad4;
+	u32 pcmd;			/* Port Command */
+	u32 pad5;
+	u32 pstatus;			/* Port Status */
+	u32 pad6;
+	u32 spar;			/* Serial Parameters */
+	u32 pad7;
+	u32 htpr;			/* Hash table pointer */
+	u32 pad8;
+	u32 fcsal;			/* Flow control source address low */
+	u32 pad9;
+	u32 fcsah;			/* Flow control source address high */
+	u32 pad10;
+	u32 sdma_conf;			/* SDMA configuration */
+	u32 pad11;
+	u32 sdma_cmd;			/* SDMA command */
+	u32 pad12;
+	u32 ic;				/* Interrupt cause */
+	u32 iwc;			/* Interrupt write to clear */
+	u32 im;				/* Interrupt mask */
+	u32 pad13;
+	u32 *eth_idscpp[4];		/* Eth0 IP Differentiated Services Code
+					   Point to Priority 0 Low */
+	u32 eth_vlan_p;			/* Eth0 VLAN Priority Tag to Priority */
+	u32 pad14[3];
+	struct rx_desc *rxfdp[4];	/* Ethernet First Rx Descriptor
+					   Pointer */
+	u32 pad15[4];
+	struct rx_desc *rxcdp[4];	/* Ethernet Current Rx Descriptor
+					   Pointer */
+	u32 pad16[0x0C];
+	struct tx_desc *txcdp[2];	/* Ethernet Current Tx Descriptor
+					   Pointer */
+};
+
+struct armdfec_device {
+	struct eth_device dev;
+	struct armdfec_reg *regs;
+	struct tx_desc *p_txdesc;
+	struct rx_desc *p_rxdesc;
+	struct rx_desc *p_rxdesc_curr;
+	u8 *p_rxbuf;
+	u8 *p_aligned_txbuf;
+	u8 *htpr;		/* hash pointer */
+};
+
+#endif /* __ARMADA100_FEC_H__ */
diff --git a/include/netdev.h b/include/netdev.h
index 96c7b9b..5c5941c 100644
--- a/include/netdev.h
+++ b/include/netdev.h
@@ -94,6 +94,7 @@ int smc911x_initialize(u8 dev_num, int base_addr);
 int tsi108_eth_initialize(bd_t *bis);
 int uec_standard_init(bd_t *bis);
 int uli526x_initialize(bd_t *bis);
+int armada100_fec_register(unsigned long base_addr);
 int xilinx_emaclite_initialize (bd_t *bis, int base_addr);
 
 /* Boards with PCI network controllers can call this from their board_eth_init()