Add Auto-MDIX support for INCA-IP

4 files changed, 105 insertions, 4 deletions

diff --git a/CHANGELOG b/CHANGELOG
index ad36ab5..4c285c3 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,8 @@
 Changes for U-Boot 1.0.2:
 ======================================================================
 
+* Add Auto-MDIX support for INCA-IP
+
 * Some code cleanup
 
 * Patch by Josef Baumgartner, 10 Feb 2004:
diff --git a/board/incaip/memsetup.S b/board/incaip/memsetup.S
index 10c4e84..3f883c1 100644
--- a/board/incaip/memsetup.S
+++ b/board/incaip/memsetup.S
@@ -185,8 +185,10 @@ sdram_init:
 
 	li	t1, MC_MODUL_BASE
 
+#if 0
 	/* Disable memory controller before changing any of its registers */
 	sw	zero, MC_CTRLENA(t1)
+#endif
 
 	li	t2, 100000000
 	beq	a0, t2, 1f
diff --git a/drivers/inca-ip_sw.c b/drivers/inca-ip_sw.c
index f5009d4..42edca8 100644
--- a/drivers/inca-ip_sw.c
+++ b/drivers/inca-ip_sw.c
@@ -67,6 +67,16 @@
 #define INCA_DMA_RX_SOP 0x40000000
 #define INCA_DMA_RX_EOP 0x20000000
 
+/************************ Auto MDIX settings ************************/
+#define INCA_IP_AUTO_MDIX_LAN_PORTS_DIR      INCA_IP_Ports_P1_DIR
+#define INCA_IP_AUTO_MDIX_LAN_PORTS_ALTSEL   INCA_IP_Ports_P1_ALTSEL  
+#define INCA_IP_AUTO_MDIX_LAN_PORTS_OUT      INCA_IP_Ports_P1_OUT
+#define INCA_IP_AUTO_MDIX_LAN_GPIO_PIN_RXTX  16
+
+#define WAIT_SIGNAL_RETRIES                  100
+#define WAIT_LINK_RETRIES                    100
+#define LINK_RETRY_DELAY                     300  /* ms */
+/********************************************************************/
 
 typedef struct
 {
@@ -143,6 +153,7 @@ static int inca_switch_recv(struct eth_device *dev);
 static void inca_switch_halt(struct eth_device *dev);
 static void inca_init_switch_chip(void);
 static void inca_dma_init(void);
+static int inca_amdix(void);
 
 
 int inca_switch_initialize(bd_t * bis)
@@ -162,6 +173,8 @@ int inca_switch_initialize(bd_t * bis)
 	inca_dma_init();
 
 	inca_init_switch_chip();
+	
+	inca_amdix();
 
 	sprintf(dev->name, "INCA-IP Switch");
 	dev->init = inca_switch_init;
@@ -610,4 +623,88 @@ static void inca_dma_init(void)
 	DMA_WRITE_REG(INCA_IP_DMA_DMA_RXISR, 0xFFFFFFFF);
 }
 
+static int inca_amdix(void)
+{
+	u32 regValue = 0;
+	int mdi_flag;
+	int retries;
+
+	/* Setup GPIO pins.
+	 */
+	*INCA_IP_AUTO_MDIX_LAN_PORTS_DIR    |= (1 << INCA_IP_AUTO_MDIX_LAN_GPIO_PIN_RXTX);
+	*INCA_IP_AUTO_MDIX_LAN_PORTS_ALTSEL |= (1 << INCA_IP_AUTO_MDIX_LAN_GPIO_PIN_RXTX);
+
+	/* Wait for signal.
+	 */
+	retries = WAIT_SIGNAL_RETRIES;
+	while (--retries)
+	{
+		SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC,
+				(0x1 << 31) |	/* RA		*/
+				(0x0 << 30) |	/* Read		*/
+				(0x6 << 21) |	/* LAN		*/
+				(17  << 16));	/* PHY_MCSR	*/
+		do
+		{
+			SW_READ_REG(INCA_IP_Switch_MDIO_ACC, regValue);
+		}
+		while (regValue & (1 << 31));
+
+		if (regValue & (1 << 1))
+		{
+			/* Signal detected */
+			break;
+		}
+	}
+
+	if (!retries)
+		return -1;
+
+	/* Set MDI mode.
+	 */
+	*INCA_IP_AUTO_MDIX_LAN_PORTS_OUT &= ~(1 << INCA_IP_AUTO_MDIX_LAN_GPIO_PIN_RXTX);
+	mdi_flag = 1;
+
+	/* Wait for link.
+	 */
+	retries = WAIT_LINK_RETRIES;
+	while (--retries)
+	{
+		udelay(LINK_RETRY_DELAY * 1000);
+		SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC,
+				(0x1 << 31) |	/* RA		*/
+				(0x0 << 30) |	/* Read		*/
+				(0x6 << 21) |	/* LAN		*/
+				(1   << 16));	/* PHY_BSR	*/
+		do
+		{
+			SW_READ_REG(INCA_IP_Switch_MDIO_ACC, regValue);
+		}
+		while (regValue & (1 << 31));
+
+		if (regValue & (1 << 2))
+		{
+			/* Link is up */
+			break;
+		}
+		else if (mdi_flag)
+		{
+			/* Set MDIX mode */
+			*INCA_IP_AUTO_MDIX_LAN_PORTS_OUT |= (1 << INCA_IP_AUTO_MDIX_LAN_GPIO_PIN_RXTX);
+			mdi_flag = 0;
+		}
+		else
+		{
+			/* Set MDI mode */
+			*INCA_IP_AUTO_MDIX_LAN_PORTS_OUT &= ~(1 << INCA_IP_AUTO_MDIX_LAN_GPIO_PIN_RXTX);
+			mdi_flag = 1;
+		}
+	}
+
+	if (!retries)
+		return -1;
+
+	return 0;
+}
+
 #endif
diff --git a/post/ether.c b/post/ether.c
index b041a43..47aa352 100644
--- a/post/ether.c
+++ b/post/ether.c
@@ -358,10 +358,10 @@ CPM_CR_CH_SCC4 };
 	 */
 
 	immr->im_cpm.cp_scc[scc_index].scc_gsmrl = (SCC_GSMRL_TCI |
-												SCC_GSMRL_TPL_48 |
-												SCC_GSMRL_TPP_10 |
-												SCC_GSMRL_DIAG_LOOP |
-												SCC_GSMRL_MODE_ENET);
+						    SCC_GSMRL_TPL_48 |
+						    SCC_GSMRL_TPP_10 |
+						    SCC_GSMRL_DIAG_LOOP |
+						    SCC_GSMRL_MODE_ENET);
 
 	/*
 	 * Initialize the DSR -- see section 13.14.4 (pg. 513) v0.4