Minor cleanup.

12 files changed, 74 insertions, 2592 deletions

diff --git a/cpu/ixp/npe/include/#IxEthAcc.h# b/cpu/ixp/npe/include/#IxEthAcc.h#
deleted file mode 100644
index a5ab668..0000000
--- a/cpu/ixp/npe/include/#IxEthAcc.h#
+++ /dev/null
@@ -1,2512 +0,0 @@
-/** @file    IxEthAcc.h
- *
- * @brief this file contains the public API of @ref IxEthAcc component
- *
- * Design notes:
- * The IX_OSAL_MBUF address is to be specified on bits [31-5] and must 
- * be cache aligned (bits[4-0] cleared)
- *
- * 
- * @par
- * IXP400 SW Release version 2.0
- * 
- * -- Copyright Notice --
- * 
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- * 
- * @par
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. Neither the name of the Intel Corporation nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- * 
- * @par
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS''
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * @par
- * -- End of Copyright Notice --
- *
- */
-
-#ifndef IxEthAcc_H
-#define IxEthAcc_H
-
-#include <IxOsBuffMgt.h>
-#include <IxTypes.h>
-
-/**
- * @defgroup IxEthAcc IXP400 Ethernet Access (IxEthAcc) API
- *
- * @brief ethAcc is a library that does provides access to the internal IXP400 10/100Bt Ethernet MACs.
- *
- *@{
- */
-
-/**
- * @ingroup IxEthAcc
- * @brief Definition of the Ethernet Access status
- */
-typedef enum /* IxEthAccStatus */
-{
-    IX_ETH_ACC_SUCCESS = IX_SUCCESS, /**< return success*/
-    IX_ETH_ACC_FAIL = IX_FAIL, /**< return fail*/
-    IX_ETH_ACC_INVALID_PORT, /**< return invalid port*/
-    IX_ETH_ACC_PORT_UNINITIALIZED, /**< return uninitialized*/
-    IX_ETH_ACC_MAC_UNINITIALIZED, /**< return MAC uninitialized*/
-    IX_ETH_ACC_INVALID_ARG, /**< return invalid arg*/
-    IX_ETH_TX_Q_FULL, /**< return tx queue is full*/
-    IX_ETH_ACC_NO_SUCH_ADDR /**< return no such address*/
-} IxEthAccStatus;
-
-/**
- * @ingroup IxEthAcc
- * @enum IxEthAccPortId
- * @brief Definition of the IXP400 Mac Ethernet device.
- */
-typedef enum  
-{
-	IX_ETH_PORT_1 = 0, /**< Ethernet Port 1 */
-	IX_ETH_PORT_2 = 1,  /**< Ethernet port 2 */
-	IX_ETH_PORT_3 = 2 /**< Ethernet port 3 */
-} IxEthAccPortId;
-
-/**
- * @ingroup IxEthAcc
- *
- * @def IX_ETH_ACC_NUMBER_OF_PORTS
- *
- * @brief  Definition of the number of ports
- *
- */
-#ifdef __ixp46X
-#define IX_ETH_ACC_NUMBER_OF_PORTS (3)
-#else
-#define IX_ETH_ACC_NUMBER_OF_PORTS (2)
-#endif
-
-/**
- * @ingroup IxEthAcc
- *
- * @def IX_IEEE803_MAC_ADDRESS_SIZE
- *
- * @brief  Definition of the size of the MAC address
- *
- */
-#define IX_IEEE803_MAC_ADDRESS_SIZE (6)
-
-
-/**
- *
- * @brief Definition of the IEEE 802.3 Ethernet MAC address structure.
- *
- * The data should be packed with bytes xx:xx:xx:xx:xx:xx 
- * @note
- * The data must be packed in network byte order.
- */
-typedef struct  
-{
-    UINT8 macAddress[IX_IEEE803_MAC_ADDRESS_SIZE]; /**< MAC address */
-} IxEthAccMacAddr;
-
-/**
- * @ingroup IxEthAcc
- * @def IX_ETH_ACC_NUM_TX_PRIORITIES
- * @brief Definition of the number of transmit priorities
- * 
- */
-#define IX_ETH_ACC_NUM_TX_PRIORITIES (8)
-
-/**
- * @ingroup IxEthAcc
- * @enum IxEthAccTxPriority
- * @brief Definition of the relative priority used to transmit a frame
- * 
- */
-typedef enum  
-{
-	IX_ETH_ACC_TX_PRIORITY_0 = 0, /**<Lowest Priority submission */
-	IX_ETH_ACC_TX_PRIORITY_1 = 1, /**<submission prority of 1 (0 is lowest)*/
-	IX_ETH_ACC_TX_PRIORITY_2 = 2, /**<submission prority of 2 (0 is lowest)*/
-	IX_ETH_ACC_TX_PRIORITY_3 = 3, /**<submission prority of 3 (0 is lowest)*/
-	IX_ETH_ACC_TX_PRIORITY_4 = 4, /**<submission prority of 4 (0 is lowest)*/
-	IX_ETH_ACC_TX_PRIORITY_5 = 5, /**<submission prority of 5 (0 is lowest)*/
-	IX_ETH_ACC_TX_PRIORITY_6 = 6, /**<submission prority of 6 (0 is lowest)*/
-	IX_ETH_ACC_TX_PRIORITY_7 = 7, /**<Highest priority submission */
-
-	IX_ETH_ACC_TX_DEFAULT_PRIORITY = IX_ETH_ACC_TX_PRIORITY_0 /**< By default send all 
-								 packets with lowest priority */
-} IxEthAccTxPriority;
-
-/**
- * @ingroup IxEthAcc
- * @enum IxEthAccRxFrameType
- * @brief Identify the type of a frame.
- * 
- * @sa IX_ETHACC_NE_FLAGS
- * @sa IX_ETHACC_NE_LINKMASK
- */
-typedef enum  
-{
-	IX_ETHACC_RX_LLCTYPE = 0x00, /**< 802.3 - 8802, with LLC/SNAP */
-	IX_ETHACC_RX_ETHTYPE = 0x10, /**< 802.3 (Ethernet) without LLC/SNAP */
-	IX_ETHACC_RX_STATYPE = 0x20, /**< 802.11, AP <=> STA */
-	IX_ETHACC_RX_APTYPE  = 0x30  /**< 802.11, AP <=> AP */
-} IxEthAccRxFrameType;
-
-/**
- * @ingroup IxEthAcc
- * @enum IxEthAccDuplexMode
- * @brief Definition to provision the duplex mode of the MAC. 
- * 
- */
-typedef enum
-{
-    IX_ETH_ACC_FULL_DUPLEX, /**< Full duplex operation of the MAC */
-    IX_ETH_ACC_HALF_DUPLEX  /**< Half duplex operation of the MAC */
-} IxEthAccDuplexMode;
-
-
-/**
- * @ingroup IxEthAcc
- * @struct IxEthAccNe
- * @brief Definition of service-specific informations.
- * 
- * This structure defines the Ethernet service-specific informations
- * and enable QoS and VLAN features.
- */
-typedef struct
-{
-    UINT32 ixReserved_next;    /**< reserved for chaining */
-    UINT32 ixReserved_lengths; /**< reserved for buffer lengths */
-    UINT32 ixReserved_data;    /**< reserved for buffer pointer */
-    UINT8  ixDestinationPortId; /**< Destination portId for this packet, if known by NPE */
-    UINT8  ixSourcePortId; /**< Source portId for this packet */
-    UINT16 ixFlags;        /**< BitField of option for this frame */
-    UINT8  ixQoS;          /**< QoS class of the frame */
-    UINT8  ixReserved;     /**< reserved */
-    UINT16 ixVlanTCI;      /**< Vlan TCI */
-    UINT8  ixDestMac[IX_IEEE803_MAC_ADDRESS_SIZE]; /**< Destination MAC address */
-    UINT8  ixSourceMac[IX_IEEE803_MAC_ADDRESS_SIZE]; /**< Source MAC address */
-} IxEthAccNe;
-
-/**
- * @ingroup IxEthAcc
- *
- * @def IX_ETHACC_NE_PORT_UNKNOWN
- *
- * @brief  Contents of the field @a IX_ETHACC_NE_DESTPORTID when no
- * destination port can be found by the NPE for this frame.
- *
- */
-#define IX_ETHACC_NE_PORT_UNKNOWN   (0xff)
-
-/**
- * @ingroup IxEthAcc
- *
- * @def IX_ETHACC_NE_DESTMAC
- *
- * @brief The location of the destination MAC address in the Mbuf header.
- *
- */
-#define IX_ETHACC_NE_DESTMAC(mBufPtr) ((IxEthAccNe *)&((mBufPtr)->ix_ne))->ixDestMac
-
-/**
- * @ingroup IxEthAcc
- *
- * @def IX_ETHACC_NE_SOURCEMAC
- *
- * @brief The location of the source MAC address in the Mbuf header.
- *
- */
-#define IX_ETHACC_NE_SOURCEMAC(mBufPtr) ((IxEthAccNe *)&((mBufPtr)->ix_ne))->ixSourceMac
-
-/**
- * @ingroup IxEthAcc
- *
- * @def IX_ETHACC_NE_VLANTCI
- *
- * @brief The VLAN Tag Control Information associated with this frame
- * 
- * The VLAN Tag Control Information associated with this frame. On Rx
- * path, this field is extracted from the packet header.
- * On Tx path, the value of this field is inserted in the frame when
- * the port is configured to insert or replace vlan tags in the 
- * egress frames.
- *
- * @sa IX_ETHACC_NE_FLAGS
- */
-#define IX_ETHACC_NE_VLANTCI(mBufPtr) ((IxEthAccNe *)&((mBufPtr)->ix_ne))->ixVlanTCI
-
-/**
- * @ingroup IxEthAcc
- *
- * @def IX_ETHACC_NE_SOURCEPORTID
- *
- * @brief The port where this frame came from.
- *
- * The port where this frame came from. This field is set on receive
- * with the port information. This field is ignored on Transmit path.
- */
-#define IX_ETHACC_NE_SOURCEPORTID(mBufPtr) ((IxEthAccNe *)&((mBufPtr)->ix_ne))->ixSourcePortId
-
-/**
- * @ingroup IxEthAcc
- *
- * @def IX_ETHACC_NE_DESTPORTID
- *
- * @brief The destination port where this frame should be sent.
- *
- * The destination port where this frame should be sent.
- *
- * @li In the transmit direction, this field contains the destination port
- * and is ignored unless @a IX_ETHACC_NE_FLAG_DST is set.
- * 
- * @li In the receive direction, this field contains the port where the
- * destination MAC addresses has been learned. If the destination
- * MAC address is unknown, then this value is set to the reserved value
- * @a IX_ETHACC_NE_PORT_UNKNOWN
- *
- */
-#define IX_ETHACC_NE_DESTPORTID(mBufPtr) ((IxEthAccNe *)&((mBufPtr)->ix_ne))->ixDestinationPortId
-
-/**
- * @ingroup IxEthAcc
- *
- * @def IX_ETHACC_NE_QOS
- *
- * @brief QualityOfService class (QoS) for this received frame.
- *
- */
-#define IX_ETHACC_NE_QOS(mBufPtr) ((IxEthAccNe *)&((mBufPtr)->ix_ne))->ixQoS
-
-/**
- * @ingroup IxEthAcc
- *
- * @def IX_ETHACC_NE_FLAGS
- *
- * @brief Bit Mask of the different flags associated with a frame
- * 
- * The flags are the bit-oring combination 
- * of the following different fields :
- *
- *      @li IP flag (Rx @a IX_ETHACC_NE_IPMASK)
- *      @li Spanning Tree flag (Rx @a IX_ETHACC_NE_STMASK)
- *      @li Link layer type (Rx and Tx @a IX_ETHACC_NE_LINKMASK)
- *      @li VLAN Tagged Frame (Rx @a IX_ETHACC_NE_VLANMASK)
- *      @li New source MAC address (Rx @a IX_ETHACC_NE_NEWSRCMASK)
- *      @li Multicast flag (Rx @a IX_ETHACC_NE_MCASTMASK)
- *      @li Broadcast flag (Rx @a IX_ETHACC_NE_BCASTMASK)
- *      @li Destination port flag (Tx @a IX_ETHACC_NE_PORTMASK)
- *      @li Tag/Untag Tx frame (Tx @a IX_ETHACC_NE_TAGMODEMASK)
- *      @li Overwrite destination port (Tx @a IX_ETHACC_NE_PORTOVERMASK)
- *      @li Filtered frame (Rx @a IX_ETHACC_NE_STMASK)
- *      @li VLAN Enabled (Rx and Tx @a IX_ETHACC_NE_VLANENABLEMASK)
- */
-#define IX_ETHACC_NE_FLAGS(mBufPtr) ((IxEthAccNe *)&((mBufPtr)->ix_ne))->ixFlags
-
-/**
- * @ingroup IxEthAcc
- *
- * @def IX_ETHACC_NE_BCASTMASK
- *
- * @brief This mask defines if a received frame is a broadcast frame.
- *
- * This mask defines if a received frame is a broadcast frame.
- * The BCAST flag is set when the destination MAC address of 
- * a frame is broadcast.
- *
- * @sa IX_ETHACC_NE_FLAGS 
- *
- */
-#define IX_ETHACC_NE_BCASTMASK      (0x1)
-
-/**
- * @ingroup IxEthAcc
- *
- * @def IX_ETHACC_NE_MCASTMASK
- *
- * @brief This mask defines if a received frame is a multicast frame.
- *
- * This mask defines if a received frame is a multicast frame.
- * The MCAST flag is set when the destination MAC address of 
- * a frame is multicast.
- *
- * @sa IX_ETHACC_NE_FLAGS 
- *
- */
-#define IX_ETHACC_NE_MCASTMASK      (0x1 << 1)
-
-/**
- * @ingroup IxEthAcc
- *
- * @def IX_ETHACC_NE_IPMASK
- *
- * @brief This mask defines if a received frame is a IP frame.
- *
- * This mask applies to @a IX_ETHACC_NE_FLAGS and defines if a received 
- * frame is a IP frame. The IP flag is set on Rx direction, depending on 
- * the frame contents. The flag is set when the length/type field of a 
- * received frame is 0x8000.
- *
- * @sa IX_ETHACC_NE_FLAGS
- *
- */
-#define IX_ETHACC_NE_IPMASK         (0x1 << 2)
-
-/**
- * @ingroup IxEthAcc
- *
- * @def IX_ETHACC_NE_VLANMASK
- *
- * @brief This mask defines if a received frame is VLAN tagged.
- *
- * This mask defines if a received frame is VLAN tagged.
- * When set, the Rx frame is VLAN-tagged and the tag value 
- * is available thru @a IX_ETHACC_NE_VLANID.
- * Note that when sending frames which are already tagged
- * this flag should be set, to avoid inserting another VLAN tag.
- *
- * @sa IX_ETHACC_NE_FLAGS 
- * @sa IX_ETHACC_NE_VLANID
- *
- */
-#define IX_ETHACC_NE_VLANMASK       (0x1 << 3)
-
-/**
- * @ingroup IxEthAcc
- *
- * @def IX_ETHACC_NE_LINKMASK
- *
- * @brief This mask is the link layer protocol indicator
- *
- * This mask applies to @a IX_ETHACC_NE_FLAGS.
- * It reflects the state of a frame as it exits an NPE on the Rx path
- * or enters an NPE on the Tx path. Its values are as follows:
- *      @li 0x00 - IEEE802.3 - 8802 (Rx) / IEEE802.3 - 8802 (Tx)
- *      @li 0x01 - IEEE802.3 - Ethernet (Rx) / IEEE802.3 - Ethernet (Tx)
- *      @li 0x02 - IEEE802.11 AP -> STA (Rx) / IEEE802.11 STA -> AP (Tx)
- *      @li 0x03 - IEEE802.11 AP -> AP (Rx) / IEEE802.11 AP->AP (Tx)
- *
- * @sa IX_ETHACC_NE_FLAGS
- *
- */
-#define IX_ETHACC_NE_LINKMASK       (0x3 << 4)
-
-/**
- * @ingroup IxEthAcc
- *
- * @def IX_ETHACC_NE_STMASK
- *
- * @brief This mask defines if a received frame is a Spanning Tree frame.
- *
- * This mask applies to @a IX_ETHACC_NE_FLAGS.
- * On rx direction, it defines if a received if frame is a Spanning Tree frame.
- * Setting this fkag on transmit direction overrides the port settings 
- * regarding the VLAN options and 
- *
- * @sa IX_ETHACC_NE_FLAGS
- *
- */
-#define IX_ETHACC_NE_STMASK         (0x1 << 6)
-
-/**
- * @ingroup IxEthAcc
- *
- * @def IX_ETHACC_NE_FILTERMASK
- *
- * @brief This bit indicates whether a frame has been filtered by the Rx service.
- *
- * This mask applies to @a IX_ETHACC_NE_FLAGS.
- * Certain frames, which should normally be fully filtered by the NPE to due
- * the destination MAC address being on the same segment as the Rx port are
- * still forwarded to the XScale (although the payload is invalid) in order
- * to learn the MAC address of the transmitting station, if this is unknown.
- * Normally EthAcc will filter and recycle these framess internally and no
- * frames with the FILTER bit set will be received by the client.
- *
- * @sa IX_ETHACC_NE_FLAGS
- *
- */
-#define IX_ETHACC_NE_FILTERMASK     (0x1 << 7)
-
-/**
- * @ingroup IxEthAcc
- *
- * @def IX_ETHACC_NE_PORTMASK
- *
- * @brief This mask defines the rule to transmit a frame
- *
- * This mask defines the rule to transmit a frame. When set, a frame
- * is transmitted to the destination port as set by the macro
- * @a IX_ETHACC_NE_DESTPORTID. If not set, the destination port 
- * is searched using the destination MAC address.
- *
- * @note This flag is meaningful only for multiport Network Engines.
- * 
- * @sa IX_ETHACC_NE_FLAGS 
- * @sa IX_ETHACC_NE_DESTPORTID
- *
- */
-#define IX_ETHACC_NE_PORTOVERMASK   (0x1 << 8)
-
-/**
- * @ingroup IxEthAcc
- *
- * @def IX_ETHACC_NE_TAGMODEMASK
- *
- * @brief This mask defines the tagging rules to apply to a transmit frame.
- *
- * This mask defines the tagging rules to apply to a transmit frame
- * regardless of the default setting for a port. When used together 
- * with @a IX_ETHACC_NE_TAGOVERMASK and when set, the 
- * frame will be tagged prior to transmission. When not set,
- * the frame will be untagged prior to transmission. This is accomplished
- * irrespective of the Egress tagging rules, constituting a per-frame override.
- *
- * @sa IX_ETHACC_NE_FLAGS
- * @sa IX_ETHACC_NE_TAGOVERMASK 
- *
- */
-#define IX_ETHACC_NE_TAGMODEMASK    (0x1 << 9)
-
-/**
- * @ingroup IxEthAcc
- *
- * @def IX_ETHACC_NE_TAGOVERMASK
- *
- * @brief This mask defines the rule to transmit a frame
- *
- * This mask defines the rule to transmit a frame. When set, the
- * default transmit rules of a port are overriden.
- * When not set, the default rules as set by @ref IxEthDB should apply.
- *
- * @sa IX_ETHACC_NE_FLAGS
- * @sa IX_ETHACC_NE_TAGMODEMASK
- *
- */
-#define IX_ETHACC_NE_TAGOVERMASK    (0x1 << 10)
-
-/**
- * @ingroup IxEthAcc
- *
- * @def IX_ETHACC_NE_VLANENABLEMASK
- *
- * @brief This mask defines if a frame is a VLAN frame or not
- *
- * When set, frames undergo normal VLAN processing on the Tx path
- * (membership filtering, tagging, tag removal etc). If this flag is
- * not set, the frame is considered to be a regular non-VLAN frame
- * and no VLAN processing will be performed.
- *
- * Note that VLAN-enabled NPE images will always set this flag in all
- * Rx frames, and images which are not VLAN enabled will clear this
- * flag for all received frames.
- *
- * @sa IX_ETHACC_NE_FLAGS
- *
- */
-#define IX_ETHACC_NE_VLANENABLEMASK (0x1 << 14)
-
-/**
- * @ingroup IxEthAcc
- *
- * @def IX_ETHACC_NE_NEWSRCMASK
- *
- * @brief This mask defines if a received frame has been learned.
- *
- * This mask defines if the source MAC address of a frame is 
- * already known. If the bit is set, the source MAC address was
- * unknown to the NPE at the time the frame was received.
- *
- * @sa IX_ETHACC_NE_FLAGS 
- *
- */
-#define IX_ETHACC_NE_NEWSRCMASK     (0x1 << 15)
-
-/**
- * @ingroup IxEthAcc
- *
- * @brief This defines the recommanded minimum size of MBUF's submitted
- * to the frame receive service.
- *
- */
-#define IX_ETHACC_RX_MBUF_MIN_SIZE (2048)
-
-/**
- * @ingroup IxEthAcc
- *
- * @brief This defines the highest MII address of any attached PHYs 
- * 
- * The maximum number for PHY address is 31, add on for range checking.
- *
- */
-#define IXP425_ETH_ACC_MII_MAX_ADDR   32
-
-/**
- * @ingroup IxEthAcc
- *
- * @fn ixEthAccInit(void)
- * 
- * @brief Initializes the IXP400 Ethernet Access Service.
- * 
- * @li Reentrant    - no
- * @li ISR Callable - no
- * 
- * This should be called once per module initialization.
- * @pre
- *   The NPE must first be downloaded with the required microcode which supports all
- *   required features.
- *
- * @return IxEthAccStatus
- * @li @a IX_ETH_ACC_SUCCESS
- * @li @a IX_ETH_ACC_FAIL	:  Service has failed to initialize.
- *
- * <hr>
- */
-PUBLIC IxEthAccStatus ixEthAccInit(void);
-
-
-/**
- * @ingroup IxEthAcc
- *
- * @fn ixEthAccUnload(void)
- * 
- * @brief Unload the Ethernet Access Service.
- * 
- * @li Reentrant    - no
- * @li ISR Callable - no
- *
- * @return void 
- *
- * <hr>
- */
-PUBLIC void ixEthAccUnload(void);
-
-/**
- * @ingroup IxEthAcc
- *
- * @fn ixEthAccPortInit( IxEthAccPortId portId)
- *
- * @brief Initializes an NPE/Ethernet MAC Port.
- *
- * The NPE/Ethernet port initialisation includes the following steps
- * @li Initialize the NPE/Ethernet MAC hardware.
- * @li Verify NPE downloaded and operational.
- * @li The NPE shall be available for usage once this API returns.
- * @li Verify that the Ethernet port is present before initializing
- *
- * @li Reentrant    - no
- * @li ISR Callable - no
- *
- * This should be called once per mac device.
- * The NPE/MAC shall be in disabled state after init.
- *
- * @pre
- *   The component must be initialized via @a ixEthAccInit
- *   The NPE must first be downloaded with the required microcode which supports all
- *   required features.
- *
- * Dependant on Services: (Must be initialized before using this service may be initialized)
- * 	ixNPEmh - NPE Message handling service.
- * 	ixQmgr	- Queue Manager component.
- *
- * @param portId  @ref IxEthAccPortId [in]
- *
- * @return IxEthAccStatus
- * @li @a IX_ETH_ACC_SUCCESS: if the ethernet port is not present, a warning is issued.
- * @li @a IX_ETH_ACC_FAIL : The NPE processor has failed to initialize.
- * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid.
- *
- * <hr>
- */
-PUBLIC IxEthAccStatus ixEthAccPortInit(IxEthAccPortId portId);
-
-
-/*************************************************************************
-
- #####     ##     #####    ##            #####     ##     #####  #    #
- #    #   #  #      #     #  #           #    #   #  #      #    #    #
- #    #  #    #     #    #    #          #    #  #    #     #    ######
- #    #  ######     #    ######          #####   ######     #    #    #
- #    #  #    #     #    #    #          #       #    #     #    #    #
- #####   #    #     #    #    #          #       #    #     #    #    #
-
-*************************************************************************/
-
-
-/**
- * @ingroup IxEthAcc
- *
- * @fn ixEthAccPortTxFrameSubmit( 
-    IxEthAccPortId portId,
-    IX_OSAL_MBUF *buffer, 
-    IxEthAccTxPriority priority)
- * 
- * @brief This function shall be used to submit MBUFs buffers for transmission on a particular MAC device. 
- *
- * When the frame is transmitted, the buffer shall be returned thru the 
- * callback @a IxEthAccPortTxDoneCallback.
- *
- * In case of over-submitting, the order of the frames on the 
- * network may be modified.
- *
- * Buffers shall be not queued for transmission if the port is disabled.
- * The port can be enabled using @a ixEthAccPortEnable
- *
- * 
- * @li Reentrant    - yes
- * @li ISR Callable - yes
- *
- *
- * @pre 
- *  @a ixEthAccPortTxDoneCallbackRegister must be called to register a function to allow this service to
- *   return the buffer to the calling service. 
- * 
- * @note 
- *  If the buffer submit fails for any reason the user has retained ownership of the buffer.
- *
- * @param portId @ref IxEthAccPortId [in] - MAC port ID to transmit Ethernet frame on.
- * @param buffer @ref IX_OSAL_MBUF [in] - pointer to an MBUF formatted buffer. Chained buffers are supported for transmission.
- *             Chained packets are not supported and the field IX_OSAL_MBUF_NEXT_PKT_IN_CHAIN_PTR is ignored. 
- * @param priority @ref IxEthAccTxPriority [in]
- *
- * @return IxEthAccStatus
- * @li @a IX_ETH_ACC_SUCCESS
- * @li @a IX_ETH_ACC_FAIL  : Failed to queue frame for transmission. 
- * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid.
- * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized
- *
- * <hr>
- */
-
-PUBLIC IxEthAccStatus ixEthAccPortTxFrameSubmit( 
-    IxEthAccPortId portId,
-    IX_OSAL_MBUF *buffer, 
-    IxEthAccTxPriority priority);
-
-/**
- * @ingroup IxEthAcc
- *
- * @brief Function prototype for Ethernet Tx Buffer Done callback. Registered 
- *  via @a ixEthAccTxBufferDoneCallbackRegister 
- * 
- * This function is called once the previously submitted buffer is no longer required by this service.
- * It may be returned upon successful transmission of the frame or during the shutdown of 
- * the port prior to the transmission of a queued frame.
- * The calling of this registered function is not a guarantee of successful transmission of the buffer.
- *
- *  
- * @li Reentrant    - yes , The user provided function should be reentrant.
- * @li ISR Callable - yes , The user provided function must be callable from an ISR.
- *
- *
- * <b>Calling Context </b>: 
- * @par
- *   This callback is called in the context of the queue manager dispatch loop @a ixQmgrgrDispatcherLoopRun
- *   within the @ref IxQMgrAPI component. The calling context may be from interrupt or high priority thread. 
- *   The decision is system specific.
- *
- * @param callbackTag UINT32 [in] - This tag is that provided when the callback was registered for a particular MAC 
- * via @a ixEthAccPortTxDoneCallbackRegister. It allows the same callback to be used for multiple MACs.
- * @param mbuf @ref IX_OSAL_MBUF [in] - Pointer to the Tx mbuf descriptor. 
- * 
- * @return void
- *
- * @note
- * The field IX_OSAL_MBUF_NEXT_PKT_IN_CHAIN_PTR is modified by the access layer and reset to NULL.
- *
- * <hr>
- */
-typedef void (*IxEthAccPortTxDoneCallback) ( UINT32 callbackTag, IX_OSAL_MBUF *buffer );
-
-
-
-/**
- * @ingroup IxEthAcc
- *
- * @fn ixEthAccPortTxDoneCallbackRegister( IxEthAccPortId portId, 
-					   IxEthAccPortTxDoneCallback txCallbackFn, 
- 					   UINT32 callbackTag)
- *
- * @brief Register a callback function to allow 
- * the transmitted buffers to return to the user.
- * 
- * This function registers the transmit buffer done function callback for a particular port.
- *
- * The registered callback function is called once the previously submitted buffer is no longer required by this service.
- * It may be returned upon successful transmission of the frame or  shutdown of port prior to submission.
- * The calling of this registered function is not a guarantee of successful transmission of the buffer.
- *
- * If called several times the latest callback shall be registered for a particular port.
- *
- * @li Reentrant    - yes
- * @li ISR Callable - yes
- *
- * @pre
- *	The port must be initialized via @a ixEthAccPortInit
- *
- *
- * @param portId @ref IxEthAccPortId [in] - Register callback for a particular MAC device.
- * @param txCallbackFn @ref IxEthAccPortTxDoneCallback [in] - Function to be called to return transmit buffers to the user.
- * @param callbackTag UINT32 [in] -  This tag shall be provided to the callback function.
- *
- * @return IxEthAccStatus
- * @li @a IX_ETH_ACC_SUCCESS 
- * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid.
- * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized
- * @li @a IX_ETH_ACC_INVALID_ARG : An argument other than portId is invalid.
- *
- * <hr>
- */
-PUBLIC IxEthAccStatus
-ixEthAccPortTxDoneCallbackRegister(IxEthAccPortId portId,
-								   IxEthAccPortTxDoneCallback txCallbackFn,
-								   UINT32 callbackTag);
-
-
-
-/**
- * @ingroup IxEthAcc
- *
- * @brief Function prototype for Ethernet Frame Rx callback. Registered via @a ixEthAccPortRxCallbackRegister 
- * 
- * It is the responsibility of the user function to free any MBUF's which it receives.
- *  
- * @li Reentrant    - yes , The user provided function should be reentrant.
- * @li ISR Callable - yes , The user provided function must be callable from an ISR.
- * @par
- *
- * This function dispatches frames to the user level
- * via the provided function. The invocation shall be made for each
- * frame dequeued from the Ethernet QM queue. The user is required to free any MBUF's 
- * supplied via this callback. In addition the registered callback must free up MBUF's
- * from the receive free queue when the port is disabled 
- * 
- * If called several times the latest callback shall be registered for a particular port.
- *
- * <b>Calling Context </b>: 
- * @par
- *   This callback is called in the context of the queue manager dispatch loop @a ixQmgrgrDispatcherLoopRun
- *   within the @ref IxQMgrAPI component. The calling context may be from interrupt or high priority thread. 
- *   The decision is system specific.
- *
- *
- * @param callbackTag UINT32 [in] - This tag is that provided when the callback was registered for a particular MAC 
- * via @a ixEthAccPortRxCallbackRegister. It allows the same callback to be used for multiple MACs.
- * @param mbuf @ref IX_OSAL_MBUF [in] - Pointer to the Rx mbuf header. Mbufs may be chained if 
- *               the frame length is greater than the supplied mbuf length.
- * @param reserved [in] - deprecated parameter The information is passed 
- *      thru the IxEthAccNe header destination port ID field 
- *      (@sa IX_ETHACC_NE_DESTPORTID). For backward 
- *      compatibility,the value is equal to IX_ETH_DB_UNKNOWN_PORT (0xff). 
- * 
- * @return void
- *
- * @note
- * Buffers may not be filled up to the length supplied in 
- * @a ixEthAccPortRxFreeReplenish(). The firmware fills
- * them to the previous 64 bytes boundary. The user has to be aware 
- * that the length of the received mbufs may be smaller than the length
- * of the supplied mbufs. 
- * The mbuf header contains the following modified field
- * @li @a IX_OSAL_MBUF_PKT_LEN is set in the header of the first mbuf and indicates
- *  the total frame size
- * @li @a IX_OSAL_MBUF_MLEN is set each mbuf header and indicates the payload length
- * @li @a IX_OSAL_MBUF_NEXT_BUFFER_IN_PKT_PTR contains a pointer to the next 
- *     mbuf, or NULL at the end of a chain.
- * @li @a IX_OSAL_MBUF_NEXT_PKT_IN_CHAIN_PTR is modified. Its value is reset to NULL
- * @li @a IX_OSAL_MBUF_FLAGS contains the bit 4 set for a broadcast packet and the bit 5
- *     set for a multicast packet. Other bits are unmodified.
- *
- * <hr>
- */
-typedef void (*IxEthAccPortRxCallback) (UINT32 callbackTag, IX_OSAL_MBUF *buffer, UINT32 reserved);
-
-/**
- * @ingroup IxEthAcc
- *
- * @brief Function prototype for Ethernet Frame Rx callback. Registered via @a ixEthAccPortMultiBufferRxCallbackRegister 
- * 
- * It is the responsibility of the user function to free any MBUF's which it receives.
- *  
- * @li Reentrant    - yes , The user provided function should be reentrant.
- * @li ISR Callable - yes , The user provided function must be callable from an ISR.
- * @par
- *
- * This function dispatches many frames to the user level
- * via the provided function. The invocation shall be made for multiple frames
- * dequeued from the Ethernet QM queue. The user is required to free any MBUF's 
- * supplied via this callback. In addition the registered callback must free up MBUF's
- * from the receive free queue when the port is disabled 
- * 
- * If called several times the latest callback shall be registered for a particular port.
- *
- * <b>Calling Context </b>: 
- * @par
- *   This callback is called in the context of the queue manager dispatch loop @a ixQmgrDispatcherLoopRun
- *   within the @ref IxQMgrAPI component. The calling context may be from interrupt or high priority thread. 
- *   The decision is system specific.
- *
- *
- * @param callbackTag - This tag is that provided when the callback was registered for a particular MAC 
- * via @a ixEthAccPortMultiBufferRxCallbackRegister. It allows the same callback to be used for multiple MACs.
- * @param mbuf - Pointer to an array of Rx mbuf headers. Mbufs 
- *               may be chained if 
- *               the frame length is greater than the supplied mbuf length.
- *               The end of the array contains a zeroed entry (NULL pointer).
- *
- * @return void
- *
- * @note The mbufs passed to this callback have the same structure than the
- *  buffers passed to @a IxEthAccPortRxCallback interfac. 
- *
- * @note The usage of this callback is exclusive with the usage of
- *  @a ixEthAccPortRxCallbackRegister and @a IxEthAccPortRxCallback 
- *
- * @sa ixEthAccPortMultiBufferRxCallbackRegister
- * @sa IxEthAccPortMultiBufferRxCallback
- * @sa ixEthAccPortRxCallbackRegister
- * @sa IxEthAccPortRxCallback
- * <hr>
- */
-
-typedef void (*IxEthAccPortMultiBufferRxCallback) (UINT32 callbackTag, IX_OSAL_MBUF **buffer);
-
-
-
-
-/**
- * @ingroup IxEthAcc
- *
- * @fn ixEthAccPortRxCallbackRegister( IxEthAccPortId portId, IxEthAccPortRxCallback rxCallbackFn, UINT32 callbackTag)
- *
- * @brief Register a callback function to allow 
- * the reception of frames.
- *
- * The registered callback function is called once a frame is received  by this service.
- *
- * If called several times the latest callback shall be registered for a particular port.
- *
- *
- * @li Reentrant    - yes
- * @li ISR Callable - yes
- *
- *
- * @param portId @ref IxEthAccPortId [in] - Register callback for a particular MAC device.
- * @param rxCallbackFn @ref IxEthAccPortRxCallback [in] - Function to be called when Ethernet frames are availble.
- * @param callbackTag UINT32 [in] -  This tag shall be provided to the callback function.
- *
- * @return IxEthAccStatus
- * @li @a IX_ETH_ACC_SUCCESS 
- * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid.
- * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized
- * @li @a IX_ETH_ACC_INVALID_ARG : An argument other than portId is invalid.
- *
- * <hr>
- */
-PUBLIC IxEthAccStatus
-ixEthAccPortRxCallbackRegister(IxEthAccPortId portId,
-							   IxEthAccPortRxCallback rxCallbackFn,
-							   UINT32 callbackTag);
-
-
-/**
- * @ingroup IxEthAcc
- *
- * @fn ixEthAccPortMultiBufferRxCallbackRegister( IxEthAccPortId portId, IxEthAccPortMultiBufferRxCallback rxCallbackFn, UINT32 callbackTag)
- *
- * @brief Register a callback function to allow 
- * the reception of frames.
- * 
- * The registered callback function is called once a frame is 
- * received  by this service. If many frames are already received, 
- * the function is called once.
- *
- * If called several times the latest callback shall be registered for a particular port.
- *
- * @li Reentrant    - yes
- * @li ISR Callable - yes
- *
- *
- * @param portId - Register callback for a particular MAC device.
- * @param rxCallbackFn - @a IxEthAccMultiBufferRxCallbackFn - Function to be called when Ethernet frames are availble.
- * @param callbackTag -  This tag shall be provided to the callback function.
- *
- * @return IxEthAccStatus
- * @li @a IX_ETH_ACC_SUCCESS 
- * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid.
- * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized
- * @li @a IX_ETH_ACC_INVALID_ARG : An argument other than portId is invalid.
- *
- * @sa ixEthAccPortMultiBufferRxCallbackRegister
- * @sa IxEthAccPortMultiBufferRxCallback
- * @sa ixEthAccPortRxCallbackRegister
- * @sa IxEthAccPortRxCallback
- * <hr>
- */
-PUBLIC IxEthAccStatus
-ixEthAccPortMultiBufferRxCallbackRegister(IxEthAccPortId portId,
-										  IxEthAccPortMultiBufferRxCallback rxCallbackFn,
-										  UINT32 callbackTag);
-
-/**
- * @ingroup IxEthAcc
- *
- * @fn ixEthAccPortRxFreeReplenish( IxEthAccPortId portId, IX_OSAL_MBUF *buffer)
- *
- * @brief This function provides buffers for the Ethernet receive path. 
- *
- * This component does not have a buffer management mechanisms built in. All Rx buffers must be supplied to it
- * via this interface. 
- *
- * @li Reentrant    - yes
- * @li ISR Callable - yes
- *
- * @param portId @ref IxEthAccPortId [in] - Provide buffers only to specific Rx MAC. 
- * @param buffer @ref IX_OSAL_MBUF [in] - Provide an MBUF to the Ethernet receive mechanism. 
- *                 Buffers size smaller than IX_ETHACC_RX_MBUF_MIN_SIZE may result in poor
- *                 performances and excessive buffer chaining. Buffers
- *                 larger than this size may be suitable for jumbo frames.
- *                 Chained packets are not supported and the field IX_OSAL_MBUF_NEXT_PKT_IN_CHAIN_PTR must be NULL. 
- *
- * @return IxEthAccStatus
- * @li @a IX_ETH_ACC_SUCCESS
- * @li @a IX_ETH_ACC_FAIL : Buffer has was not able to queue the 
- *                     buffer in the receive service.
- * @li @a IX_ETH_ACC_FAIL : Buffer size is less than IX_ETHACC_RX_MBUF_MIN_SIZE
- * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid.
- * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized
- *
- * @note
- * If the buffer replenish operation fails it is the responsibility 
- * of the user to free the buffer.
- *
- * @note
- * Sufficient buffers must be supplied to the component to maintain
- * receive throughput and avoid rx buffer underflow conditions.
- * To meet this goal, It is expected that the user preload the 
- * component with a sufficent number of buffers prior to enabling the
- * NPE Ethernet receive path. The recommended minimum number of 
- * buffers is 8.
- *
- * @note
- * For maximum performances, the mbuf size should be greater 
- * than the maximum frame size (Ethernet header, payload and FCS) + 64. 
- * Supplying smaller mbufs to the service results in mbuf
- * chaining and degraded performances. The recommended size
- * is @a IX_ETHACC_RX_MBUF_MIN_SIZE, which is
- * enough to take care of 802.3 frames and "baby jumbo" frames without
- * chaining, and "jumbo" frame within chaining.
- *
- * @note
- * Buffers may not be filled up to their length. The firware fills
- * them up to the previous 64 bytes boundary. The user has to be aware 
- * that the length of the received mbufs may be smaller than the length
- * of the supplied mbufs.
- *
- * @warning This function checks the parameters if the NDEBUG 
- * flag is not defined. Turning on the argument checking (disabled by 
- * default) results in a lower EthAcc performance as this function
- * is part of the data path.
- *
- * <hr>
- */
-PUBLIC IxEthAccStatus
-ixEthAccPortRxFreeReplenish( IxEthAccPortId portId, IX_OSAL_MBUF *buffer);
-
-
-
-/***************************************************************
-
-  ####    ####   #    #   #####  #####    ####   #
- #    #  #    #  ##   #     #    #    #  #    #  #
- #       #    #  # #  #     #    #    #  #    #  #
- #       #    #  #  # #     #    #####   #    #  #
- #    #  #    #  #   ##     #    #   #   #    #  #
-  ####    ####   #    #     #    #    #   ####   ######
-
-
-         #####   #         ##    #    #  ######
-         #    #  #        #  #   ##   #  #
-         #    #  #       #    #  # #  #  #####
-         #####   #       ######  #  # #  #
-         #       #       #    #  #   ##  #
-         #       ######  #    #  #    #  ######
-
-***************************************************************/
-
-/**
- * @ingroup IxEthAcc
- *
- * @fn ixEthAccPortEnable(IxEthAccPortId portId)
- *
- * @brief This enables an Ethernet port for both Tx and Rx. 
- *
- * @li Reentrant    - yes
- * @li ISR Callable - no
- *
- * @pre The port must first be initialized via @a ixEthAccPortInit and the MAC address 
- * must be set using @a ixEthAccUnicastMacAddressSet before enabling it
- * The rx and Tx Done callbacks registration via @a
- * ixEthAccPortTxDoneCallbackRegister amd @a  ixEthAccPortRxCallbackRegister
- * has to be done before enabling the traffic.
- * 
- * @param  portId @ref IxEthAccPortId [in] - Port id to act upon.
- * 
- * @return IxEthAccStatus
- * @li @a IX_ETH_ACC_SUCCESS 
- * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid.
- * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is not initialized
- * @li @a IX_ETH_ACC_MAC_UNINITIALIZED : port MAC address is not initialized
- *
- * <hr>
- */
-PUBLIC IxEthAccStatus ixEthAccPortEnable(IxEthAccPortId portId);
-
-/**
- * @ingroup IxEthAcc
- *
- * @fn ixEthAccPortDisable(IxEthAccPortId portId)
- *
- * @brief This disables an Ethernet port for both Tx and Rx. 
- *
- * Free MBufs are returned to the user via the registered callback when the port is disabled 
- *
- * @li Reentrant    - yes
- * @li ISR Callable - no
- *
- * @pre The port must be enabled with @a ixEthAccPortEnable, otherwise this
- * function has no effect
- *
- * @param  portId @ref IxEthAccPortId [in] - Port id to act upon.
- * 
- * @return IxEthAccStatus
- * @li @a IX_ETH_ACC_SUCCESS 
- * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid.
- * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is not initialized
- * @li @a IX_ETH_ACC_MAC_UNINITIALIZED : port MAC address is not initialized
- *
- * <hr>
- */
-PUBLIC IxEthAccStatus ixEthAccPortDisable(IxEthAccPortId portId);
-
-/**
- * @ingroup IxEthAcc
- *
- * @fn ixEthAccPortEnabledQuery(IxEthAccPortId portId, BOOL *enabled)
- *
- * @brief Get the enabled state of a port.
- *
- * @li Reentrant    - yes
- * @li ISR Callable - yes
- *
- * @pre The port must first be initialized via @a ixEthAccPortInit
- *
- * @param  portId @ref IxEthAccPortId [in] - Port id to act upon.
- * @param  enabled BOOL [out] - location to store the state of the port
- *
- * @return IxEthAccStatus
- * @li @a IX_ETH_ACC_SUCCESS
- * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid
- *
- * <hr>
- */
-PUBLIC IxEthAccStatus
-ixEthAccPortEnabledQuery(IxEthAccPortId portId, BOOL *enabled);
-
-/**
- * @ingroup IxEthAcc
- *
- * @fn ixEthAccPortPromiscuousModeClear(IxEthAccPortId portId)
- *
- * @brief Put the Ethernet MAC device in non-promiscuous mode.
- * 
- * In non-promiscuous mode the MAC filters all frames other than 
- * destination MAC address which matches the following criteria:
- * @li Unicast address provisioned via @a ixEthAccUnicastMacAddressSet
- * @li All broadcast frames.
- * @li Multicast addresses provisioned via @a ixEthAccMulticastAddressJoin
- *
- * Other functions modify the MAC filtering
- *
- * @li @a ixEthAccPortMulticastAddressJoinAll() - all multicast
- *     frames are forwarded to the application
- * @li @a ixEthAccPortMulticastAddressLeaveAll() - rollback the
- *     effects of @a ixEthAccPortMulticastAddressJoinAll()
- * @li @a ixEthAccPortMulticastAddressLeave() - unprovision a new 
- *     filtering address
- * @li @a ixEthAccPortMulticastAddressJoin() - provision a new 
- *     filtering address
- * @li @a ixEthAccPortPromiscuousModeSet() - all frames are 
- *     forwarded to the application regardless of the multicast 
- *     address provisioned
- * @li @a ixEthAccPortPromiscuousModeClear() - frames are forwarded 
- *     to the application following the multicast address provisioned
- *
- * In all cases, unicast and broadcast addresses are forwarded to 
- * the application.
- *
- * @li Reentrant    - yes
- * @li ISR Callable - no
- * 
- * @sa ixEthAccPortPromiscuousModeSet
- * 
- * @param portId @ref IxEthAccPortId [in] - Ethernet port id.
- * 
- * @return IxEthAccStatus 
- * @li @a IX_ETH_ACC_SUCCESS
- * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid.
- * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized
- *
- * <hr>
- */
-PUBLIC IxEthAccStatus ixEthAccPortPromiscuousModeClear(IxEthAccPortId portId);
-
-
-/**
- * @ingroup IxEthAcc
- *
- * @fn  ixEthAccPortPromiscuousModeSet(IxEthAccPortId portId)
- *
- * @brief Put the MAC device in promiscuous mode.
- * 
- * If the device is in promiscuous mode then all all received frames shall be forwared
- * to the NPE for processing.
- *
- * Other functions modify the MAC filtering
- *
- * @li @a ixEthAccPortMulticastAddressJoinAll() - all multicast
- *     frames are forwarded to the application
- * @li @a ixEthAccPortMulticastAddressLeaveAll() - rollback the
- *     effects of @a ixEthAccPortMulticastAddressJoinAll()
- * @li @a ixEthAccPortMulticastAddressLeave() - unprovision a new 
- *     filtering address
- * @li @a ixEthAccPortMulticastAddressJoin() - provision a new 
- *     filtering address
- * @li @a ixEthAccPortPromiscuousModeSet() - all frames are 
- *     forwarded to the application regardless of the multicast 
- *     address provisioned
- * @li @a ixEthAccPortPromiscuousModeClear() - frames are forwarded 
- *     to the application following the multicast address provisioned
- *
- * In all cases, unicast and broadcast addresses are forwarded to 
- * the application.
- *
- * @li Reentrant    - yes
- * @li ISR Callable - no
- * 
- * @sa ixEthAccPortPromiscuousModeClear
- *
- * @param portId @ref IxEthAccPortId [in] - Ethernet port id.
- * 
- * @return IxEthAccStatus 
- * @li @a IX_ETH_ACC_SUCCESS
- * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid.
- * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized
- *
- * <hr>
- */
-PUBLIC IxEthAccStatus ixEthAccPortPromiscuousModeSet(IxEthAccPortId portId);
-
-/**
- * @ingroup IxEthAcc
- *
- * @fn ixEthAccPortUnicastMacAddressSet(      IxEthAccPortId portId,
-                                                  IxEthAccMacAddr *macAddr)
- *
- * @brief Configure unicast MAC address for a particular port
- *
- *
- * @li Reentrant    - yes
- * @li ISR Callable - no
- *
- * @param portId @ref IxEthAccPortId [in] - Ethernet port id.
- * @param *macAddr @ref IxEthAccMacAddr [in] - Ethernet Mac address.
- *
- * @return IxEthAccStatus 
- * @li @a IX_ETH_ACC_SUCCESS
- * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid.
- * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized
- *
- * <hr>
- */
-PUBLIC IxEthAccStatus ixEthAccPortUnicastMacAddressSet(IxEthAccPortId portId,
-													   IxEthAccMacAddr *macAddr);
-
-/**
- * @ingroup IxEthAcc
- *
- * @fn ixEthAccPortUnicastMacAddressGet(	IxEthAccPortId portId, 
-					IxEthAccMacAddr *macAddr)
- *
- * @brief Get unicast MAC address for a particular MAC port 
- *
- * @pre
- * The MAC address must first be set via @a ixEthAccMacPromiscuousModeSet
- * If the MAC address has not been set, the function returns a 
- * IX_ETH_ACC_MAC_UNINITIALIZED status
- *
- * @li Reentrant    - yes
- * @li ISR Callable - no
- *
- * @param portId @ref IxEthAccPortId [in] - Ethernet port id.
- * @param *macAddr @ref IxEthAccMacAddr [out] - Ethernet MAC address.
- *
- * @return  IxEthAccStatus
- * @li @a IX_ETH_ACC_SUCCESS
- * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid.
- * @li @a IX_ETH_ACC_MAC_UNINITIALIZED : port MAC address is not initialized.
- * @li @a IX_ETH_ACC_FAIL : macAddr is invalid.
- *
- * <hr>
- */
-PUBLIC IxEthAccStatus
-ixEthAccPortUnicastMacAddressGet(IxEthAccPortId portId,
-								 IxEthAccMacAddr *macAddr);
-
-
-
-
-/**
- * @ingroup IxEthAcc
- *
- * @fn ixEthAccPortMulticastAddressJoin(      IxEthAccPortId portId,
-                                             IxEthAccMacAddr *macAddr)
- *
- * @brief Add a multicast address to the MAC address table.
- *
- *  @note
- *  Due to the operation of the Ethernet MAC multicast filtering mechanism, frames which do not 
- *  have a multicast destination address which were provisioned via this API may be forwarded 
- *  to the NPE's. This is a result of the hardware comparison  algorithm used in the destination mac address logic
- *  within the Ethernet MAC. 
- *
- *  See Also: IXP425 hardware development manual.
- * 
- * Other functions modify the MAC filtering
- *
- * @li @a ixEthAccPortMulticastAddressJoinAll() - all multicast
- *     frames are forwarded to the application
- * @li @a ixEthAccPortMulticastAddressLeaveAll() - rollback the
- *     effects of @a ixEthAccPortMulticastAddressJoinAll()
- * @li @a ixEthAccPortMulticastAddressLeave() - unprovision a new 
- *     filtering address
- * @li @a ixEthAccPortMulticastAddressJoin() - provision a new 
- *     filtering address
- * @li @a ixEthAccPortPromiscuousModeSet() - all frames are 
- *     forwarded to the application regardless of the multicast 
- *     address provisioned
- * @li @a ixEthAccPortPromiscuousModeClear() - frames are forwarded 
- *     to the application following the multicast address provisioned
- *
- * In all cases, unicast and broadcast addresses are forwarded to 
- * the application.
- *
- * @li Reentrant    - yes
- * @li ISR Callable - no
- *
- * @param portId @ref IxEthAccPortId [in] - Ethernet port id.
- * @param *macAddr @ref IxEthAccMacAddr [in] - Ethernet Mac address.
- *
- * @return IxEthAccStatus 
- * @li @a IX_ETH_ACC_SUCCESS
- * @li @a IX_ETH_ACC_FAIL : Error writing to the MAC registers
- * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid.
- * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized
- *
- * <hr>
- */
-PUBLIC IxEthAccStatus
-ixEthAccPortMulticastAddressJoin(IxEthAccPortId portId,
-								 IxEthAccMacAddr *macAddr);
-
-/**
- * @ingroup IxEthAcc
- *
- * @fn ixEthAccPortMulticastAddressJoinAll(  IxEthAccPortId portId)
- *
- * @brief Filter all frames with multicast dest.
- *
- * This function clears the MAC address table, and then sets
- * the MAC to forward ALL multicast frames to the NPE.
- * Specifically, it forwards all frames whose destination address
- * has the LSB of the highest byte set  (01:00:00:00:00:00).  This
- * bit is commonly referred to as the "multicast bit".
- * Broadcast frames will still be forwarded. 
- *
- * Other functions modify the MAC filtering
- *
- * @li @a ixEthAccPortMulticastAddressJoinAll() - all multicast
- *     frames are forwarded to the application
- * @li @a ixEthAccPortMulticastAddressLeaveAll() - rollback the
- *     effects of @a ixEthAccPortMulticastAddressJoinAll()
- * @li @a ixEthAccPortMulticastAddressLeave() - unprovision a new 
- *     filtering address
- * @li @a ixEthAccPortMulticastAddressJoin() - provision a new 
- *     filtering address
- * @li @a ixEthAccPortPromiscuousModeSet() - all frames are 
- *     forwarded to the application regardless of the multicast 
- *     address provisioned
- * @li @a ixEthAccPortPromiscuousModeClear() - frames are forwarded 
- *     to the application following the multicast address provisioned
- *
- * In all cases, unicast and broadcast addresses are forwarded to 
- * the application.
- *
- * @li Reentrant    - yes
- * @li ISR Callable - no
- *
- * @param portId @ref IxEthAccPortId [in] - Ethernet port id.
- *
- * @return IxEthAccStatus 
- * @li @a IX_ETH_ACC_SUCCESS
- * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid.
- * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized
- *
- * <hr>
- */
-PUBLIC IxEthAccStatus
-ixEthAccPortMulticastAddressJoinAll(IxEthAccPortId portId);
-
-/**
- * @ingroup IxEthAcc
- *
- * @fn ixEthAccPortMulticastAddressLeave( IxEthAccPortId portId,
-                                         IxEthAccMacAddr *macAddr)
- *
- * @brief Remove a multicast address from the MAC address table.
- *
- * Other functions modify the MAC filtering
- *
- * @li @a ixEthAccPortMulticastAddressJoinAll() - all multicast
- *     frames are forwarded to the application
- * @li @a ixEthAccPortMulticastAddressLeaveAll() - rollback the
- *     effects of @a ixEthAccPortMulticastAddressJoinAll()
- * @li @a ixEthAccPortMulticastAddressLeave() - unprovision a new 
- *     filtering address
- * @li @a ixEthAccPortMulticastAddressJoin() - provision a new 
- *     filtering address
- * @li @a ixEthAccPortPromiscuousModeSet() - all frames are 
- *     forwarded to the application regardless of the multicast 
- *     address provisioned
- * @li @a ixEthAccPortPromiscuousModeClear() - frames are forwarded 
- *     to the application following the multicast address provisioned
- *
- * In all cases, unicast and broadcast addresses are forwarded to 
- * the application.
- *
- * @li Reentrant    - yes
- * @li ISR Callable - no
- *
- * @param portId @ref IxEthAccPortId [in] - Ethernet port id.
- * @param *macAddr @ref IxEthAccMacAddr [in] - Ethernet Mac address.
- *
- * @return IxEthAccStatus
- * @li @a IX_ETH_ACC_SUCCESS
- * @li @a IX_ETH_ACC_NO_SUCH_ADDR :  Failed if MAC address was not in the table.
- * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid.
- * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized
- *
- * <hr>
- */
-PUBLIC IxEthAccStatus
-ixEthAccPortMulticastAddressLeave(IxEthAccPortId portId,
-								  IxEthAccMacAddr *macAddr);
-
-/**
- * @ingroup IxEthAcc
- *
- * @fn ixEthAccPortMulticastAddressLeaveAll( IxEthAccPortId portId)
- *
- * @brief This function unconfigures the multicast filtering settings
- *
- * This function first clears the MAC address table, and then sets
- * the MAC as configured by the promiscuous mode current settings.
- *
- * Other functions modify the MAC filtering
- *
- * @li @a ixEthAccPortMulticastAddressJoinAll() - all multicast
- *     frames are forwarded to the application
- * @li @a ixEthAccPortMulticastAddressLeaveAll() - rollback the
- *     effects of @a ixEthAccPortMulticastAddressJoinAll()
- * @li @a ixEthAccPortMulticastAddressLeave() - unprovision a new 
- *     filtering address
- * @li @a ixEthAccPortMulticastAddressJoin() - provision a new 
- *     filtering address
- * @li @a ixEthAccPortPromiscuousModeSet() - all frames are 
- *     forwarded to the application regardless of the multicast 
- *     address provisioned
- * @li @a ixEthAccPortPromiscuousModeClear() - frames are forwarded 
- *     to the application following the multicast address provisioned
- *
- * In all cases, unicast and broadcast addresses are forwarded to 
- * the application.
- *
- * @li Reentrant    - yes
- * @li ISR Callable - no
- *
- * @param portId @ref IxEthAccPortId [in] - Ethernet port id.
- *
- * @return IxEthAccStatus
- * @li @a IX_ETH_ACC_SUCCESS
- * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid.
- * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized
- *
- * <hr>
- */
-PUBLIC IxEthAccStatus
-ixEthAccPortMulticastAddressLeaveAll(IxEthAccPortId portId);
-
-/**
- * @ingroup IxEthAcc
- *
- * @fn ixEthAccPortUnicastAddressShow(IxEthAccPortId portId)
- *
- * @brief Displays unicast MAC address
- *
- * Displays unicast address which is configured using 
- * @a ixEthAccUnicastMacAddressSet. This function also displays the MAC filter used
- * to filter multicast frames.
- *
- * Other functions modify the MAC filtering
- *
- * @li @a ixEthAccPortMulticastAddressJoinAll() - all multicast
- *     frames are forwarded to the application
- * @li @a ixEthAccPortMulticastAddressLeaveAll() - rollback the
- *     effects of @a ixEthAccPortMulticastAddressJoinAll()
- * @li @a ixEthAccPortMulticastAddressLeave() - unprovision a new 
- *     filtering address
- * @li @a ixEthAccPortMulticastAddressJoin() - provision a new 
- *     filtering address
- * @li @a ixEthAccPortPromiscuousModeSet() - all frames are 
- *     forwarded to the application regardless of the multicast 
- *     address provisioned
- * @li @a ixEthAccPortPromiscuousModeClear() - frames are forwarded 
- *     to the application following the multicast address provisioned
- *
- * In all cases, unicast and broadcast addresses are forwarded to 
- * the application.
- *
- * @li Reentrant    - yes
- * @li ISR Callable - no
- *
- * @param portId @ref IxEthAccPortId [in] - Ethernet port id.
- *
- * @return void
- *
- * <hr>
- */
-PUBLIC IxEthAccStatus ixEthAccPortUnicastAddressShow(IxEthAccPortId portId);
-
-
-/**
- * @ingroup IxEthAcc
- *
- * @fn ixEthAccPortMulticastAddressShow( IxEthAccPortId portId)
- *
- * @brief Displays multicast MAC address
- *
- * Displays multicast address which have been configured using @a ixEthAccMulticastAddressJoin
- * 
- * @li Reentrant    - yes
- * @li ISR Callable - no
- * 
- * @param portId @ref IxEthAccPortId [in] - Ethernet port id.
- *
- * @return void
- *
- * <hr>
- */
-PUBLIC void ixEthAccPortMulticastAddressShow( IxEthAccPortId portId);
-
-/**
- * @ingroup IxEthAcc
- *
- * @fn ixEthAccPortDuplexModeSet( IxEthAccPortId portId, IxEthAccDuplexMode mode )
- *
- * @brief  Set the duplex mode for the MAC.
- *
- * Configure the IXP400 MAC to either full or half duplex. 
- *
- * @note 
- * The configuration should match that provisioned on the PHY.
- *
- * @li Reentrant    - yes
- * @li ISR Callable - no
- *
- * @param portId @ref IxEthAccPortId [in]
- * @param mode @ref IxEthAccDuplexMode [in]
- *
- * @return IxEthAccStatus 
- * @li @a IX_ETH_ACC_SUCCESS 
- * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid.
- * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized
- *
- * <hr>
- */
-PUBLIC IxEthAccStatus 
-ixEthAccPortDuplexModeSet(IxEthAccPortId portId,IxEthAccDuplexMode mode);
-
-/**
- * @ingroup IxEthAcc
- *
- * @fn ixEthAccPortDuplexModeGet( IxEthAccPortId portId, IxEthAccDuplexMode *mode )
- *
- * @brief  Get the duplex mode for the MAC.
- *
- * return the duplex configuration of the IXP400 MAC.
- *
- * @note
- * The configuration should match that provisioned on the PHY.
- * See @a ixEthAccDuplexModeSet
- *
- * @li Reentrant    - yes
- * @li ISR Callable - no
- *
- * @param portId @ref IxEthAccPortId [in]
- * @param *mode @ref IxEthAccDuplexMode [out]
- *
- * @return IxEthAccStatus
- * @li @a IX_ETH_ACC_SUCCESS 
- * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid.
- * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized
- *
- * <hr>
- *
- */
-PUBLIC IxEthAccStatus 
-ixEthAccPortDuplexModeGet(IxEthAccPortId portId,IxEthAccDuplexMode *mode );
-
-/**
- * @ingroup IxEthAcc
- *
- * @fn ixEthAccPortTxFrameAppendPaddingEnable( IxEthAccPortId portId)
- *
- * @brief  Enable padding bytes to be appended to runt frames submitted to
- * this port
- * 
- * Enable up to 60 null-bytes padding bytes to be appended to runt frames 
- * submitted to this port. This is the default behavior of the access 
- * component.
- *
- * @warning Do not change this behaviour while the port is enabled.
- *
- * @note When Tx padding is enabled, Tx FCS generation is turned on
- *
- * @li Reentrant    - yes
- * @li ISR Callable - no
- *
- * @sa ixEthAccPortTxFrameAppendFCSDusable
- *
- * @param portId @ref IxEthAccPortId [in]
- *
- * @return IxEthAccStatus
- * @li @a IX_ETH_ACC_SUCCESS 
- * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid.
- * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized
- *
- * <hr>
- */
-PUBLIC IxEthAccStatus
-ixEthAccPortTxFrameAppendPaddingEnable(IxEthAccPortId portId);
-
-/**
- * @ingroup IxEthAcc
- *
- * @fn ixEthAccPortTxFrameAppendPaddingDisable( IxEthAccPortId portId)
- *
- * @brief  Disable padding bytes to be appended to runt frames submitted to
- * this port
- * 
- * Disable padding bytes to be appended to runt frames 
- * submitted to this port. This is not the default behavior of the access 
- * component.
- *
- * @warning Do not change this behaviour while the port is enabled.
- *
- * @li Reentrant    - yes
- * @li ISR Callable - no
- *
- * @param portId @ref IxEthAccPortId [in] 
- *
- * @return IxEthAccStatus
- * @li @a IX_ETH_ACC_SUCCESS 
- * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid.
- * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized
- *
- * <hr>
- */
-PUBLIC IxEthAccStatus
-ixEthAccPortTxFrameAppendPaddingDisable(IxEthAccPortId portId);
-
-/**
- * @ingroup IxEthAcc
- *
- * @fn ixEthAccPortTxFrameAppendFCSEnable( IxEthAccPortId portId)
- *
- * @brief  Enable the appending of Ethernet FCS to all frames submitted to this port
- * 
- * When enabled, the FCS is added to the submitted frames. This is the default 
- * behavior of the access component.
- * Do not change this behaviour while the port is enabled.
- *
- * @li Reentrant    - yes
- * @li ISR Callable - no
- *
- * @param portId @ref IxEthAccPortId [in] 
- *
- * @return IxEthAccStatus
- * @li @a IX_ETH_ACC_SUCCESS 
- * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid.
- * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized
- *
- * <hr>
- */
-PUBLIC IxEthAccStatus
-ixEthAccPortTxFrameAppendFCSEnable(IxEthAccPortId portId);
-
-/**
- * @ingroup IxEthAcc
- *
- * @fn ixEthAccPortTxFrameAppendFCSDisable( IxEthAccPortId portId)
- *
- * @brief  Disable the appending of Ethernet FCS to all frames submitted to this port.
- * 
- * When disabled, the Ethernet FCS is not added to the submitted frames. 
- * This is not the default
- * behavior of the access component.
- *
- * @note Since the FCS is not appended to the frame it is expected that the frame submitted to the 
- * component includes a valid FCS at the end of the data, although this will not be validated.
- *
- * The component shall forward the frame to the Ethernet MAC WITHOUT modification.
- *
- * Do not change this behaviour while the port is enabled.
- *
- * @note Tx FCS append is not disabled while Tx padding is enabled.
- *
- * @li Reentrant    - yes
- * @li ISR Callable - no
- *
- * @sa ixEthAccPortTxFrameAppendPaddingEnable
- *
- * @param portId @ref IxEthAccPortId [in] 
- *
- * @return IxEthAccStatus
- * @li @a IX_ETH_ACC_SUCCESS 
- * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid.
- * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized
- *
- * <hr>
- */
-PUBLIC IxEthAccStatus
-ixEthAccPortTxFrameAppendFCSDisable(IxEthAccPortId portId);
-
-/**
- * @ingroup IxEthAcc
- *
- * @fn ixEthAccPortRxFrameAppendFCSEnable( IxEthAccPortId portId)
- *
- * @brief Forward frames with FCS included in the receive buffer.
- *
- * The FCS is not striped from the receive buffer. 
- * The received frame length includes the FCS size (4 bytes). ie. 
- * A minimum sized ethernet frame shall have a length of 64bytes.
- *
- * Frame FCS validity checks are still carried out on all received frames.
- *
- * This is not the default
- * behavior of the access component.
- *
- * @li Reentrant    - yes
- * @li ISR Callable - no
- *
- * @param portId @ref IxEthAccPortId [in]
- *
- * @return IxEthAccStatus
- * @li @a IX_ETH_ACC_SUCCESS 
- * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid.
- * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized
- *
- * <hr>
- */
-PUBLIC IxEthAccStatus
-ixEthAccPortRxFrameAppendFCSEnable(IxEthAccPortId portId);
-
-/**
- * @ingroup IxEthAcc
- *
- * @fn ixEthAccPortRxFrameAppendFCSDisable( IxEthAccPortId portId)
- *
- * @brief  Do not forward the FCS portion of the received Ethernet frame to the user. 
- * The FCS is striped from the receive buffer. 
- * The received frame length does not include the FCS size (4 bytes).
- * Frame FCS validity checks are still carried out on all received frames.
- *
- * This is the default behavior of the component.
- * Do not change this behaviour while the port is enabled.
- *
- * @li Reentrant    - yes
- * @li ISR Callable - no
- *
- * @param portId @ref IxEthAccPortId [in]
- *
- * @return IxEthAccStatus
- * @li @a IX_ETH_ACC_SUCCESS 
- * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid.
- * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized
- *
- * <hr>
- */
-PUBLIC IxEthAccStatus
-ixEthAccPortRxFrameAppendFCSDisable(IxEthAccPortId portId);
-
-
-
-
-/**
- * @ingroup IxEthAcc
- *
- * @enum IxEthAccSchedulerDiscipline
- *
- * @brief  Definition for the port scheduling discipline
- *
- * Select the port scheduling discipline on receive and transmit path
- * @li FIFO : No Priority : In this configuration all frames are processed
- *                       in the access component in the strict order in which 
- *                        the component received them.
- * @li FIFO : Priority : This shall be a very simple priority mechanism. 
- *                     Higher prior-ity frames shall be forwarded 
- *                     before lower priority frames. There shall be no 
- *                     fairness mechanisms applied across different 
- *                     priorities. Higher priority frames could starve 
- *                     lower priority frames indefinitely.
- */
-typedef  enum 
-{
-    FIFO_NO_PRIORITY, /**<frames submitted with no priority*/
-    FIFO_PRIORITY /**<higher prority frames submitted before lower priority*/
-}IxEthAccSchedulerDiscipline;
-
-/**
- * @ingroup IxEthAcc
- *
- * @def IxEthAccTxSchedulerDiscipline
- *
- * @brief  Deprecated definition for the port transmit scheduling discipline
- */ 
-#define IxEthAccTxSchedulerDiscipline IxEthAccSchedulerDiscipline
-
-
-
-/**
- * @ingroup IxEthAcc
- *
- * @fn ixEthAccTxSchedulingDisciplineSet( IxEthAccPortId portId, IxEthAccSchedulerDiscipline sched)
- *
- * @brief Set the port scheduling to one of @a IxEthAccSchedulerDiscipline
- *
- * The default behavior of the component is @a FIFO_NO_PRIORITY.
- *
- * @li Reentrant    - yes
- * @li ISR Callable - no
- *
- * @pre
- *
- *
- * @param portId @ref IxEthAccPortId [in] 
- * @param sched @ref IxEthAccSchedulerDiscipline [in] 
- *
- * @return IxEthAccStatus
- * @li @a IX_ETH_ACC_SUCCESS : Set appropriate discipline.
- * @li @a IX_ETH_ACC_FAIL :  Invalid/unsupported discipline.
- * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid.
- * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized
- *
- * <hr>
- */
-PUBLIC IxEthAccStatus
-ixEthAccTxSchedulingDisciplineSet(IxEthAccPortId portId, 
-								  IxEthAccSchedulerDiscipline sched);
-
-
-/**
- * @ingroup IxEthAcc
- *
- * @fn ixEthAccRxSchedulingDisciplineSet(IxEthAccSchedulerDiscipline sched)
- *
- * @brief Set the Rx scheduling to one of @a IxEthAccSchedulerDiscipline
- *
- * The default behavior of the component is @a FIFO_NO_PRIORITY.
- *
- * @li Reentrant    - yes
- * @li ISR Callable - no
- *
- * @pre
- *
- * @param sched : @a IxEthAccSchedulerDiscipline 
- *
- * @return IxEthAccStatus
- * @li @a IX_ETH_ACC_SUCCESS : Set appropriate discipline.
- * @li @a IX_ETH_ACC_FAIL :  Invalid/unsupported discipline.
- *
- * <hr>
- */
-PUBLIC IxEthAccStatus
-ixEthAccRxSchedulingDisciplineSet(IxEthAccSchedulerDiscipline sched);
-
-/**
- * @ingroup IxEthAcc
- *
- * @fn IxEthAccStatus ixEthAccNpeLoopbackEnable(IxEthAccPortId portId)
- *
- * @brief Enable NPE loopback
- *
- * When this loopback mode is enabled all the transmitted frames are
- * received on the same port, without payload.
- *
- * This function is recommended for power-up diagnostic checks and
- * should never be used under normal Ethernet traffic operations.
- *
- * @li Reentrant    - yes
- * @li ISR Callable - no
- *
- * @pre
- *
- * @param portId : ID of the port 
- *
- * @note Calling ixEthAccPortDisable followed by ixEthAccPortEnable is
- * guaranteed to restore correct Ethernet Tx/Rx operation.
- *
- * @return IxEthAccStatus
- * @li @a IX_ETH_ACC_SUCCESS : NPE loopback mode enabled
- * @li @a IX_ETH_ACC_FAIL : Invalid port or Ethernet service not initialized
- *
- * <hr>
- */
-PUBLIC IxEthAccStatus 
-ixEthAccPortNpeLoopbackEnable(IxEthAccPortId portId);
-
-/**
- * @ingroup IxEthAcc
- *
- * @fn IxEthAccStatus ixEthAccPortNpeLoopbackDisable(IxEthAccPortId portId)
- *
- * @brief Disable NPE loopback
- *
- * This function is used to disable the NPE loopback if previously
- * enabled using ixEthAccNpeLoopbackEnable.
- *
- * This function is recommended for power-up diagnostic checks and
- * should never be used under normal Ethernet traffic operations.
- *
- * @li Reentrant    - yes
- * @li ISR Callable - no
- *
- * @pre
- *
- * @note Calling ixEthAccPortDisable followed by ixEthAccPortEnable is
- * guaranteed to restore correct Ethernet Tx/Rx operation.
- *
- * @param portId : ID of the port 
- *
- * @return IxEthAccStatus
- * @li @a IX_ETH_ACC_SUCCESS : NPE loopback successfully disabled
- * @li @a IX_ETH_ACC_FAIL : Invalid port or Ethernet service not initialized
- *
- * <hr>
- */
-PUBLIC IxEthAccStatus 
-ixEthAccPortNpeLoopbackDisable(IxEthAccPortId portId);
-
-/**
- * @ingroup IxEthAcc
- *
- * @fn IxEthAccStatus ixEthAccPortTxEnable(IxEthAccPortId portId)
- *
- * @brief Enable Tx on the port
- *
- * This function is the complement of ixEthAccPortTxDisable and should
- * be used only after Tx was disabled. A MAC core reset is required before
- * this function is called (see @a ixEthAccPortMacReset).
- *
- * This function is the recommended usage scenario for emergency security
- * shutdown and hardware failure recovery and should never be used for throttling 
- * traffic.
- *
- * @li Reentrant    - yes
- * @li ISR Callable - no
- *
- * @pre
- *
- * @note Calling ixEthAccPortDisable followed by ixEthAccPortEnable is
- * guaranteed to restore correct Ethernet Tx/Rx operation.
- *
- * @param portId : ID of the port 
- *
- * @return IxEthAccStatus
- * @li @a IX_ETH_ACC_SUCCESS : Tx successfully enabled
- * @li @a IX_ETH_ACC_FAIL : Invalid port or Ethernet service not initialized
- *
- * <hr>
- */
-PUBLIC IxEthAccStatus 
-ixEthAccPortTxEnable(IxEthAccPortId portId);
-
-/**
- * @ingroup IxEthAcc
- *
- * @fn IxEthAccStatus ixEthAccPortTxDisable(IxEthAccPortId portId)
- *
- * @brief Disable Tx on the port
- *
- * This function can be used to disable Tx in the MAC core.
- * Tx can be re-enabled, although this is not guaranteed, by performing
- * a MAC core reset (@a ixEthAccPortMacReset) and calling ixEthAccPortTxEnable.
- * Note that using this function is not recommended, except for shutting
- * down Tx for emergency reasons. For proper port shutdown and re-enabling
- * see ixEthAccPortEnable and ixEthAccPortDisable.
- *
- * This function is the recommended usage scenario for emergency security
- * shutdown and hardware failure recovery and should never be used for throttling 
- * traffic.
- *
- * @li Reentrant    - yes
- * @li ISR Callable - no
- *
- * @note Calling ixEthAccPortDisable followed by ixEthAccPortEnable is
- * guaranteed to restore correct Ethernet Tx/Rx operation.
- *
- * @pre
- *
- * @param portId : ID of the port 
- *
- * @return IxEthAccStatus
- * @li @a IX_ETH_ACC_SUCCESS : Tx successfully disabled
- * @li @a IX_ETH_ACC_FAIL : Invalid port or Ethernet service not initialized
- *
- * <hr>
- */
-PUBLIC IxEthAccStatus 
-ixEthAccPortTxDisable(IxEthAccPortId portId);
-
-/**
- * @ingroup IxEthAcc
- *
- * @fn IxEthAccStatus ixEthAccPortRxEnable(IxEthAccPortId portId)
- *
- * @brief Enable Rx on the port
- *
- * This function is the complement of ixEthAccPortRxDisable and should
- * be used only after Rx was disabled.
- *
- * This function is the recommended usage scenario for emergency security
- * shutdown and hardware failure recovery and should never be used for throttling 
- * traffic.
- *
- * @li Reentrant    - yes
- * @li ISR Callable - no
- *
- * @note Calling ixEthAccPortDisable followed by ixEthAccPortEnable is
- * guaranteed to restore correct Ethernet Tx/Rx operation.
- *
- * @pre
- *
- * @param portId : ID of the port 
- *
- * @return IxEthAccStatus
- * @li @a IX_ETH_ACC_SUCCESS : Rx successfully enabled
- * @li @a IX_ETH_ACC_FAIL : Invalid port or Ethernet service not initialized
- *
- * <hr>
- */
-PUBLIC IxEthAccStatus 
-ixEthAccPortRxEnable(IxEthAccPortId portId);
-
-/**
- * @ingroup IxEthAcc
- *
- * @fn IxEthAccStatus ixEthAccPortRxDisable(IxEthAccPortId portId)
- *
- * @brief Disable Rx on the port
- *
- * This function can be used to disable Rx in the MAC core.
- * Rx can be re-enabled, although this is not guaranteed, by performing
- * a MAC core reset (@a ixEthAccPortMacReset) and calling ixEthAccPortRxEnable.
- * Note that using this function is not recommended, except for shutting
- * down Rx for emergency reasons. For proper port shutdown and re-enabling
- * see ixEthAccPortEnable and ixEthAccPortDisable.
- *
- * This function is the recommended usage scenario for emergency security
- * shutdown and hardware failure recovery and should never be used for throttling 
- * traffic.
- *
- * @li Reentrant    - yes
- * @li ISR Callable - no
- *
- * @pre
- *
- * @note Calling ixEthAccPortDisable followed by ixEthAccPortEnable is
- * guaranteed to restore correct Ethernet Tx/Rx operation.
- *
- * @param portId : ID of the port 
- *
- * @return IxEthAccStatus
- * @li @a IX_ETH_ACC_SUCCESS : Rx successfully disabled
- * @li @a IX_ETH_ACC_FAIL : Invalid port or Ethernet service not initialized
- *
- * <hr>
- */
-PUBLIC IxEthAccStatus 
-ixEthAccPortRxDisable(IxEthAccPortId portId);
-
-/**
- * @ingroup IxEthAcc
- *
- * @fn IxEthAccStatus ixEthAccPortMacReset(IxEthAccPortId portId)
- *
- * @brief Reset MAC core on the port
- *
- * This function will perform a MAC core reset (NPE Ethernet coprocessor).
- * This function is inherently unsafe and the NPE recovery is not guaranteed
- * after this function is called. The proper manner of performing port disable
- * and enable (which will reset the MAC as well) is ixEthAccPortEnable/ixEthAccPortDisable.
- *
- * This function is the recommended usage scenario for hardware failure recovery
- * and should never be used for throttling traffic.
- *
- * @li Reentrant    - yes
- * @li ISR Callable - no
- *
- * @pre
- *
- * @note Calling ixEthAccPortDisable followed by ixEthAccPortEnable is
- * guaranteed to restore correct Ethernet Tx/Rx operation.
- *
- * @param portId : ID of the port 
- *
- * @return IxEthAccStatus
- * @li @a IX_ETH_ACC_SUCCESS : MAC core reset
- * @li @a IX_ETH_ACC_FAIL : Invalid port or Ethernet service not initialized
- *
- * <hr>
- */
-PUBLIC IxEthAccStatus 
-ixEthAccPortMacReset(IxEthAccPortId portId);
-
-/*********************************************************************************
-  ####    #####    ##     #####     #     ####    #####     #     ####    ####
- #          #     #  #      #       #    #          #       #    #    #  #
-  ####      #    #    #     #       #     ####      #       #    #        ####
-      #     #    ######     #       #         #     #       #    #            #
- #    #     #    #    #     #       #    #    #     #       #    #    #  #    #
-  ####      #    #    #     #       #     ####      #       #     ####    ####
-**********************************************************************************/
-
-
-/**
- *
- * @brief This struct defines the statistics returned by this component.
- *
- * The component returns MIB2 EthObj variables which are obtained from the 
- * hardware or maintained by this component. 
- *
- *
- */
-typedef struct   
-{
-    UINT32 dot3StatsAlignmentErrors;            /**< link error count (rx) */
-    UINT32 dot3StatsFCSErrors;                  /**< link error count (rx) */
-    UINT32 dot3StatsInternalMacReceiveErrors;   /**< link error count (rx) */
-    UINT32 RxOverrunDiscards;                   /**< NPE: discarded frames count (rx) */
-    UINT32 RxLearnedEntryDiscards;                /**< NPE: discarded frames count(rx)  */
-    UINT32 RxLargeFramesDiscards;                 /**< NPE: discarded frames count(rx)  */
-    UINT32 RxSTPBlockedDiscards;                  /**< NPE: discarded frames count(rx)  */
-    UINT32 RxVLANTypeFilterDiscards;              /**< NPE: discarded frames count (rx) */
-    UINT32 RxVLANIdFilterDiscards;                /**< NPE: discarded frames count (rx) */
-    UINT32 RxInvalidSourceDiscards;               /**< NPE: discarded frames count (rx) */
-    UINT32 RxBlackListDiscards;                   /**< NPE: discarded frames count (rx) */
-    UINT32 RxWhiteListDiscards;                   /**< NPE: discarded frames count (rx) */
-    UINT32 RxUnderflowEntryDiscards;              /**< NPE: discarded frames count (rx) */
-    UINT32 dot3StatsSingleCollisionFrames;      /**< link error count (tx) */
-    UINT32 dot3StatsMultipleCollisionFrames;    /**< link error count (tx) */
-    UINT32 dot3StatsDeferredTransmissions;      /**< link error count (tx) */
-    UINT32 dot3StatsLateCollisions;             /**< link error count (tx) */
-    UINT32 dot3StatsExcessiveCollsions;         /**< link error count (tx) */
-    UINT32 dot3StatsInternalMacTransmitErrors;  /**< link error count (tx) */
-    UINT32 dot3StatsCarrierSenseErrors;         /**< link error count (tx) */
-    UINT32 TxLargeFrameDiscards;                /**< NPE: discarded frames count (tx) */
-    UINT32 TxVLANIdFilterDiscards;              /**< NPE: discarded frames count (tx) */
-
-}IxEthEthObjStats;
-
-/**
- * @ingroup IxEthAcc
- *
- * @fn ixEthAccMibIIStatsGet(IxEthAccPortId portId ,IxEthEthObjStats *retStats )
- *
- * @brief  Returns the statistics maintained for a port.
- *
- * @li Reentrant    - yes
- * @li ISR Callable - no
- *
- * @pre
- *
- *
- * @param portId @ref IxEthAccPortId [in] 
- * @param retStats @ref IxEthEthObjStats [out]
- * @note Please note the user is responsible for cache coheriency of the retStat
- * buffer. The data is actually populated via the NPE's. As such cache safe
- * memory should be used in the retStats argument.
- *
- * @return IxEthAccStatus
- * @li @a IX_ETH_ACC_SUCCESS
- * @li @a IX_ETH_ACC_FAIL : Invalid arguments.
- * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid.
- * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized
- *
- * <hr>
- */
-PUBLIC IxEthAccStatus
-ixEthAccMibIIStatsGet(IxEthAccPortId portId, IxEthEthObjStats *retStats );
-
-/**
- * @ingroup IxEthAcc
- *
- * @fn ixEthAccMibIIStatsGetClear(IxEthAccPortId portId, IxEthEthObjStats *retStats)
- * 
- * @brief  Returns and clears the statistics maintained for a port. 
- *
- * @li Reentrant    - yes
- * @li ISR Callable - yes
- *
- * @pre
- *
- * @param portId @ref IxEthAccPortId [in] 
- * @param retStats @ref IxEthEthObjStats [out]
- * @note Please note the user is responsible for cache coheriency of the retStats
- * buffer. The data is actually populated via the NPE's. As such cache safe
- * memory should be used in the retStats argument.
- *
- * @return IxEthAccStatus
- * @li @a IX_ETH_ACC_SUCCESS
- * @li @a IX_ETH_ACC_FAIL : invalid arguments.
- * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid.
- * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized
- *
- * <hr>
- */
-PUBLIC IxEthAccStatus
-ixEthAccMibIIStatsGetClear(IxEthAccPortId portId, IxEthEthObjStats *retStats);
-
-/**
- * @ingroup IxEthAcc
- *
- * @fn ixEthAccMibIIStatsClear(IxEthAccPortId portId)
- *
- * @brief   Clears the statistics maintained for a port.
- *
- * @li Reentrant    - yes
- * @li ISR Callable - no
- *
- * @pre
- *
- * @param portId @ref IxEthAccPortId [in]
- *
- * @return IxEthAccStatus
- * @li @a IX_ETH_ACC_SUCCESS
- * @li @a IX_ETH_ACC_FAIL : Invalid arguments.
- * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid.
- * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized
- *
- * <hr>
- */
-PUBLIC IxEthAccStatus ixEthAccMibIIStatsClear(IxEthAccPortId portId);
-
-/**
- * @ingroup IxEthAcc
- *
- * @fn ixEthAccMacInit(IxEthAccPortId portId)
- * 
- * @brief Initializes the ethernet MAC settings 
- * 
- * @li Reentrant    - no
- * @li ISR Callable - no
- *
- * @param portId @ref IxEthAccPortId [in]
- *
- * @return IxEthAccStatus
- * @li @a IX_ETH_ACC_SUCCESS
- * @li @a IX_ETH_ACC_INVALID_PORT	:  portId is invalid.
- *
- * <hr>
- */
-PUBLIC IxEthAccStatus ixEthAccMacInit(IxEthAccPortId portId);
-
-/**
- * @ingroup IxEthAcc
- *
- * @fn ixEthAccStatsShow(IxEthAccPortId portId)
- *
- *
- * @brief Displays a ports statistics on the standard io console using printf.
- *
- * @li Reentrant    - no
- * @li ISR Callable - no
- *
- * @pre
- *
- * @param portId @ref IxEthAccPortId [in]
- *
- * @return void
- *
- * <hr>
- */
-PUBLIC void ixEthAccStatsShow(IxEthAccPortId portId);
-
-/*************************************************************************
-
- #    #     #       #            #    #  #####      #     ####
- ##  ##     #       #            ##  ##  #    #     #    #    #
- # ## #     #       #            # ## #  #    #     #    #    #
- #    #     #       #            #    #  #    #     #    #    #
- #    #     #       #            #    #  #    #     #    #    #
- #    #     #       #            #    #  #####      #     ####
-
-*************************************************************************/
-
-
-/**
- * @ingroup IxEthAcc
- *
- * @fn ixEthAccMiiReadRtn (UINT8 phyAddr, 
-                           UINT8 phyReg, 
-	                   UINT16 *value)
- *
- *
- * @brief Reads a 16 bit value from a PHY
- *
- * Reads a 16-bit word from a register of a MII-compliant PHY. Reading
- * is performed through the MII management interface.  This function returns
- * when the read operation has successfully completed, or when a timeout has elapsed.
- *
- * @li Reentrant    - no
- * @li ISR Callable - no
- *
- * @pre The MAC on Ethernet Port 2 (NPE C) must be initialised, and generating the MDIO clock.
- *   
- * @param phyAddr UINT8 [in] - the address of the Ethernet PHY (0-31)
- * @param phyReg UINT8 [in] -  the number of the MII register to read (0-31)
- * @param value UINT16 [in] -  the value read from the register
- *
- * @return IxEthAccStatus
- * @li @a IX_ETH_ACC_SUCCESS
- * @li @a IX_ETH_ACC_FAIL : failed to read the register.
- *
- * <hr>
- */
-PUBLIC IxEthAccStatus
-ixEthAccMiiReadRtn (UINT8 phyAddr, UINT8 phyReg, UINT16 *value);
-
-/**
- * @ingroup IxEthAcc
- *
- * @fn ixEthAccMiiWriteRtn (UINT8 phyAddr, 
-                            UINT8 phyReg, 
-	                    UINT16 value)
- *
- *
- * @brief Writes a 16 bit value to a PHY
- *
- * Writes a 16-bit word from a register of a MII-compliant PHY. Writing
- * is performed through the MII management interface.  This function returns
- * when the write operation has successfully completed, or when a timeout has elapsed.
- *
- * @li Reentrant    - no
- * @li ISR Callable - no
- *
- * @pre The MAC on Ethernet Port 2 (NPE C) must be initialised, and generating the MDIO clock.
- *   
- * @param phyAddr UINT8 [in] - the address of the Ethernet PHY (0-31)
- * @param phyReg UINT8 [in] -  the number of the MII register to write (0-31)
- * @param value UINT16 [out] -  the value to write to the register
- *
- * @return IxEthAccStatus
- * @li @a IX_ETH_ACC_SUCCESS
- * @li @a IX_ETH_ACC_FAIL : failed to write register.
- *
- * <hr>
- */
-PUBLIC IxEthAccStatus
-ixEthAccMiiWriteRtn (UINT8 phyAddr, UINT8 phyReg, UINT16 value);
-
-/**
- * @ingroup IxEthAcc
- *
- * @fn ixEthAccMiiAccessTimeoutSet(UINT32 timeout)
- *
- * @brief Overrides the default timeout value and retry count when reading or 
- * writing MII registers using ixEthAccMiiWriteRtn or ixEthAccMiiReadRtn
- *
- * The default behavior of the component is to use a IX_ETH_ACC_MII_10TH_SEC_IN_MILLIS ms
- * timeout (declared as 100 in IxEthAccMii_p.h) and a retry count of IX_ETH_ACC_MII_TIMEOUT_10TH_SECS
- * (declared as 5 in IxEthAccMii_p.h).
- *
- * The MII read and write functions will attempt to read the status of the register up
- * to the retry count times, delaying between each attempt with the timeout value.
- *
- * @li Reentrant    - no
- * @li ISR Callable - no
- *
- * @pre
- *
- * @param timeout UINT32 [in] - new timeout value, in milliseconds
- * @param timeout UINT32 [in] - new retry count (a minimum value of 1 must be used)
- *
- * @return IxEthAccStatus
- * @li @a IX_ETH_ACC_SUCCESS
- * @li @a IX_ETH_ACC_FAIL : invalid parameter(s)
- *
- * <hr>
- */
-PUBLIC IxEthAccStatus
-ixEthAccMiiAccessTimeoutSet(UINT32 timeout, UINT32 retryCount);
-
-/**
- * @ingroup IxEthAcc
- *
- * @fn ixEthAccMiiStatsShow (UINT32 phyAddr)
- *
- *
- * @brief Displays detailed information on a specified PHY
- *
- * Displays the current values of the first eigth MII registers for a PHY, 
- *
- * @li Reentrant    - no
- * @li ISR Callable - no
- *
- * @pre The MAC on Ethernet Port 2 (NPE C) must be initialised, and 
- *      generating the MDIO clock.
- *   
- * @param phyAddr UINT32 [in] - the address of the Ethernet PHY (0-31)
- *
- * @return IxEthAccStatus
- * @li @a IX_ETH_ACC_SUCCESS
- * @li @a IX_ETH_ACC_FAIL : invalid arguments.
- *
- * <hr>
- */
-PUBLIC IxEthAccStatus ixEthAccMiiStatsShow (UINT32 phyAddr);
-
-
-
-/******* BOARD SPECIFIC DEPRECATED API *********/
-
-/* The following functions are high level functions which rely
- * on the properties and interface of some Ethernet PHYs. The
- * implementation is hardware specific and has been moved to 
- * the hardware-specific component IxEthMii.
- */
-
- #include "IxEthMii.h"
-
-/**
- * @ingroup IxEthAcc
- *
- * @def  ixEthAccMiiPhyScan
- *
- * @brief : deprecated API entry point. This definition 
- * ensures backward compatibility
- *
- * See @ref ixEthMiiPhyScan
- *
- * @note this feature is board specific
- *
- */
-#define ixEthAccMiiPhyScan(phyPresent) ixEthMiiPhyScan(phyPresent,IXP425_ETH_ACC_MII_MAX_ADDR)
-
-/**
- * @ingroup IxEthAcc
- *
- * @def ixEthAccMiiPhyConfig
- *
- * @brief : deprecated API entry point. This definition 
- * ensures backward compatibility
- *
- * See @ref ixEthMiiPhyConfig
- *
- * @note this feature is board specific
- */
-#define ixEthAccMiiPhyConfig(phyAddr,speed100,fullDuplex,autonegotiate) \
-           ixEthMiiPhyConfig(phyAddr,speed100,fullDuplex,autonegotiate)
-
-/**
- * @ingroup IxEthAcc
- *
- * @def ixEthAccMiiPhyReset
- *
- * @brief : deprecated API entry point. This definition 
- * ensures backward compatibility
- *
- * See @ref ixEthMiiPhyReset
- *
- * @note this feature is board specific
- */
-#define ixEthAccMiiPhyReset(phyAddr) \
-           ixEthMiiPhyReset(phyAddr)
-
-/**
- * @ingroup IxEthAcc
- *
- * @def ixEthAccMiiLinkStatus
- *
- * @brief : deprecated API entry point. This definition 
- * ensures backward compatibility
- *
- * See @ref ixEthMiiLinkStatus
- *
- * @note this feature is board specific
- */
-#define ixEthAccMiiLinkStatus(phyAddr,linkUp,speed100,fullDuplex,autoneg) \
-           ixEthMiiLinkStatus(phyAddr,linkUp,speed100,fullDuplex,autoneg)
-
-
-
-/**
- * @ingroup IxEthAcc
- *
- * @def ixEthAccMiiShow  
- *
- * @brief : deprecated API entry point. This definition 
- * ensures backward compatibility
- *
- * See @ref ixEthMiiPhyShow
- *
- * @note this feature is board specific
- */
-#define ixEthAccMiiShow(phyAddr) \
-        ixEthMiiPhyShow(phyAddr)
-
-#endif /* ndef IxEthAcc_H */
-/**
- *@}
- */
diff --git a/cpu/ixp/npe/include/IxEthDB.h b/cpu/ixp/npe/include/IxEthDB.h
index 1189c9a..43ee802 100644
--- a/cpu/ixp/npe/include/IxEthDB.h
+++ b/cpu/ixp/npe/include/IxEthDB.h
@@ -799,10 +799,10 @@ IxEthDBStatus ixEthDBFilteringDatabaseShowRecords(IxEthDBPortId portID, IxEthDBR
  * @verbatim
     IxEthDBPortMap portMap;
     
-    // clear all ports from port map
+    /* clear all ports from port map */
     memset(portMap, 0, sizeof (portMap)); 
     
-    // include portID in port map 
+    /* include portID in port map  */
     portMap[portID / 8] = 1 << (portID % 8);
    @endverbatim
  *
diff --git a/cpu/ixp/npe/include/IxEthDBQoS.h b/cpu/ixp/npe/include/IxEthDBQoS.h
index 9fafa70..6d34889 100644
--- a/cpu/ixp/npe/include/IxEthDBQoS.h
+++ b/cpu/ixp/npe/include/IxEthDBQoS.h
@@ -120,16 +120,16 @@ UINT8 ixEthDBTrafficClassDefinitions[][3] =
  * @brief IEEE 802.1Q recommended QoS Priority => traffic class maps
  *
  * @verbatim
-                    Number of available traffic classes

-                    1 2 3 4 5 6 7 8

-    QoS Priority

-        0           0 0 0 1 1 1 1 2

-        1           0 0 0 0 0 0 0 0

-        2           0 0 0 0 0 0 0 1

-        3           0 0 0 1 1 2 2 3

-        4           0 1 1 2 2 3 3 4

-        5           0 1 1 2 3 4 4 5

-        6           0 1 2 3 4 5 5 6

+                    Number of available traffic classes
+                    1 2 3 4 5 6 7 8
+    QoS Priority
+        0           0 0 0 1 1 1 1 2
+        1           0 0 0 0 0 0 0 0
+        2           0 0 0 0 0 0 0 1
+        3           0 0 0 1 1 2 2 3
+        4           0 1 1 2 2 3 3 4
+        5           0 1 1 2 3 4 4 5
+        6           0 1 2 3 4 5 5 6
         7           0 1 2 3 4 5 6 7
 
     @endverbatim
diff --git a/cpu/ixp/npe/include/IxNpeDlNpeMgr_p.h b/cpu/ixp/npe/include/IxNpeDlNpeMgr_p.h
index 3d2313c..b7fb0f0 100644
--- a/cpu/ixp/npe/include/IxNpeDlNpeMgr_p.h
+++ b/cpu/ixp/npe/include/IxNpeDlNpeMgr_p.h
@@ -174,8 +174,8 @@ ixNpeDlNpeMgrImageLoad (IxNpeDlNpeId npeId, UINT32 *imageCodePtr,
  *
  * @return
  *     - IX_SUCCESS if the operation was successful
- *     - IX_FAIL if the operation failed

- *     - IX_NPEDL_CRITICAL_NPE_ERR if the operation failed due to NPE hang

+ *     - IX_FAIL if the operation failed
+ *     - IX_NPEDL_CRITICAL_NPE_ERR if the operation failed due to NPE hang
  */ 
 IX_STATUS
 ixNpeDlNpeMgrNpeReset (IxNpeDlNpeId npeId);
diff --git a/cpu/ixp/npe/include/IxOsServicesComponents.h b/cpu/ixp/npe/include/IxOsServicesComponents.h
index f1a6779..d662cd3 100644
--- a/cpu/ixp/npe/include/IxOsServicesComponents.h
+++ b/cpu/ixp/npe/include/IxOsServicesComponents.h
@@ -62,10 +62,10 @@
 #define ix_i2c                 40
 #define ix_integration_sspAcc  41
 #define ix_integration_i2c     42
-#define ix_osal		       43

-#define ix_integration_parityENAcc  44

-#define ix_integration_timeSyncAcc  45

-

+#define ix_osal		       43
+#define ix_integration_parityENAcc  44
+#define ix_integration_timeSyncAcc  45
+
 /***************************
  * timeSyncAcc
  ***************************/
@@ -106,29 +106,29 @@
 #endif /* codelets_parityENAcc */
 
 #endif /* IxOsServicesComponents_H */
-

-/***************************

- * integration_timeSyncAcc

- ***************************/

-#if (IX_COMPONENT_NAME == ix_integration_timeSyncAcc)

-

-#if defined (IX_OSSERV_VXWORKS_LE)

-

-#define CSR_LE_DATA_COHERENT_MAPPING

-

-#endif /* IX_OSSERV_VXWORKS_LE */

-

-#endif /* integration_timeSyncAcc */

-

-/***************************

- * integration_parityENAcc

- ***************************/

-#if (IX_COMPONENT_NAME == ix_integration_parityENAcc)

-

-#if defined (IX_OSSERV_VXWORKS_LE)

-

-#define CSR_LE_DATA_COHERENT_MAPPING

-

-#endif /* IX_OSSERV_VXWORKS_LE */

-

-#endif /* integration_parityENAcc */
\ No newline at end of file
+
+/***************************
+ * integration_timeSyncAcc
+ ***************************/
+#if (IX_COMPONENT_NAME == ix_integration_timeSyncAcc)
+
+#if defined (IX_OSSERV_VXWORKS_LE)
+
+#define CSR_LE_DATA_COHERENT_MAPPING
+
+#endif /* IX_OSSERV_VXWORKS_LE */
+
+#endif /* integration_timeSyncAcc */
+
+/***************************
+ * integration_parityENAcc
+ ***************************/
+#if (IX_COMPONENT_NAME == ix_integration_parityENAcc)
+
+#if defined (IX_OSSERV_VXWORKS_LE)
+
+#define CSR_LE_DATA_COHERENT_MAPPING
+
+#endif /* IX_OSSERV_VXWORKS_LE */
+
+#endif /* integration_parityENAcc */
diff --git a/cpu/ixp/npe/include/IxOsalAssert.h b/cpu/ixp/npe/include/IxOsalAssert.h
index af0cffd..45cebcd 100644
--- a/cpu/ixp/npe/include/IxOsalAssert.h
+++ b/cpu/ixp/npe/include/IxOsalAssert.h
@@ -60,7 +60,7 @@
  *        will not be compiled out.
  *        N.B. will result in a system crash if it is false.
  */
-#define IX_OSAL_ASSERT(c) IX_OSAL_OS_ASSERT(c)

+#define IX_OSAL_ASSERT(c) IX_OSAL_OS_ASSERT(c)
 
 
 /**
diff --git a/cpu/ixp/npe/include/IxOsalIoMem.h b/cpu/ixp/npe/include/IxOsalIoMem.h
index a3a7124..ac0ce65 100644
--- a/cpu/ixp/npe/include/IxOsalIoMem.h
+++ b/cpu/ixp/npe/include/IxOsalIoMem.h
@@ -63,13 +63,12 @@
  * @{ 
  */
 
-

 /* Low-level conversion macros - DO NOT USE UNLESS ABSOLUTELY NEEDED */
 #ifndef __wince
 
 
 /* 
- * Private function to swap word*//*
+ * Private function to swap word
  */
 #ifdef __XSCALE__
 static __inline__ UINT32
@@ -91,7 +90,6 @@ ixOsalCoreWordSwap (UINT32 wordIn)
 
     return wordOut;
 }
-

 
 #define IX_OSAL_SWAP_LONG(wData)          (ixOsalCoreWordSwap(wData))
 #else
@@ -149,7 +147,7 @@ typedef enum
 /**
  * @ingroup IxOsalIoMem
  * @enum IxOsalMapEndianessType
- * @brief This is an emum for OSAL I/O mem Endianess and Coherency mode.

+ * @brief This is an emum for OSAL I/O mem Endianess and Coherency mode.
  */
 typedef enum
 {
@@ -172,10 +170,9 @@ typedef struct _IxOsalMemoryMap
 
     UINT32 size;               /**< size of the map */
 
-

-    UINT32 virtualAddress;     /**< virtual address of the zone; must be predefined 

-                                    in the global memory map for static maps and has 

-                                    to be NULL for dynamic maps (populated on allocation) 

+    UINT32 virtualAddress;     /**< virtual address of the zone; must be predefined
+                                    in the global memory map for static maps and has
+                                    to be NULL for dynamic maps (populated on allocation)
 								*/
     /*
      * pointer to a map function called to map a dynamic map; 
@@ -245,12 +242,12 @@ ixOsalIoMemPhysToVirt (UINT32 physicalAddress, UINT32 coherency);
  *
  * @def IX_OSAL_MEM_MAP(physAddr, size)
  *
- * @brief Map an I/O mapped physical memory zone to virtual zone and return virtual 

- *        pointer.

+ * @brief Map an I/O mapped physical memory zone to virtual zone and return virtual
+ *        pointer.
  * @param  physAddr - the physical address
  * @param  size     - the size
- * @return start address of the virtual memory zone.

- * 

+ * @return start address of the virtual memory zone.
+ *
  * @note  This function maps an I/O mapped physical memory zone of the given size
  * into a virtual memory zone accessible by the caller and returns a cookie - 
  * the start address of the virtual memory zone. 
@@ -260,23 +257,23 @@ ixOsalIoMemPhysToVirt (UINT32 physicalAddress, UINT32 coherency);
  * finished using this zone (e.g. on driver unload) using the cookie as 
  * parameter.
  * The IX_OSAL_READ/WRITE_LONG/SHORT macros should be used to read and write 
- * the mapped memory, adding the necessary offsets to the address cookie.

+ * the mapped memory, adding the necessary offsets to the address cookie.
  */
 #define IX_OSAL_MEM_MAP(physAddr, size) \
     ixOsalIoMemMap((physAddr), (size), IX_OSAL_COMPONENT_MAPPING)
 
 
-/**

+/**
  * @ingroup IxOsalIoMem
  *
  * @def IX_OSAL_MEM_UNMAP(virtAddr)
  *
- * @brief Unmap a previously mapped I/O memory zone using virtual pointer obtained 

- *        during the mapping operation.

- *        pointer.

+ * @brief Unmap a previously mapped I/O memory zone using virtual pointer obtained
+ *        during the mapping operation.
+ *        pointer.
  * @param  virtAddr - the virtual pointer to the zone to be unmapped.
- * @return none

- * 

+ * @return none
+ *
  * @note  This function unmaps a previously mapped I/O memory zone using
  * the cookie obtained in the mapping operation. The memory zone in question
  * becomes unavailable to the caller once unmapped and the cookie should be
@@ -288,37 +285,36 @@ ixOsalIoMemPhysToVirt (UINT32 physicalAddress, UINT32 coherency);
 #define IX_OSAL_MEM_UNMAP(virtAddr) \
     ixOsalIoMemUnmap ((virtAddr), IX_OSAL_COMPONENT_MAPPING)
 
-/**

+/**
  * @ingroup IxOsalIoMem
  *
  * @def IX_OSAL_MMAP_VIRT_TO_PHYS(virtAddr)
  *
  * @brief This function Converts a virtual address into a physical 
  * address, including the dynamically mapped memory.
- *

+ *
  * @param  virtAddr - virtual address to convert
- * Return value: corresponding physical address, or NULL 

+ * Return value: corresponding physical address, or NULL
  */
 #define IX_OSAL_MMAP_VIRT_TO_PHYS(virtAddr) \
     ixOsalIoMemVirtToPhys(virtAddr, IX_OSAL_COMPONENT_MAPPING)
 
 
-/**

+/**
  * @ingroup IxOsalIoMem
  *
  * @def IX_OSAL_MMAP_PHYS_TO_VIRT(physAddr)
  *
  * @brief  This function Converts a virtual address into a physical 
  * address, including the dynamically mapped memory.
- *

+ *
  * @param  physAddr - physical address to convert
- * Return value: corresponding virtual address, or NULL 

- *

+ * Return value: corresponding virtual address, or NULL
+ *
  */
 #define IX_OSAL_MMAP_PHYS_TO_VIRT(physAddr) \
     ixOsalIoMemPhysToVirt(physAddr, IX_OSAL_COMPONENT_MAPPING)
 
-

 /**
  * @} IxOsalIoMem
  */
diff --git a/cpu/ixp/npe/include/IxOsalOsAssert.h b/cpu/ixp/npe/include/IxOsalOsAssert.h
index 9d1ecb4..e4c3e1f 100644
--- a/cpu/ixp/npe/include/IxOsalOsAssert.h
+++ b/cpu/ixp/npe/include/IxOsalOsAssert.h
@@ -7,4 +7,4 @@
                                     while(1); \
                                 }
 
-#endif // IxOsalOsAssert_H
+#endif /* IxOsalOsAssert_H */
diff --git a/cpu/ixp/npe/include/IxOsalOsBufferMgt.h b/cpu/ixp/npe/include/IxOsalOsBufferMgt.h
index 567c8da..8e46586 100644
--- a/cpu/ixp/npe/include/IxOsalOsBufferMgt.h
+++ b/cpu/ixp/npe/include/IxOsalOsBufferMgt.h
@@ -55,7 +55,7 @@
 
 #include "IxOsalBufferMgtDefault.h"
 
-#if 0  // FIXME
+#if 0  /* FIXME */
 /* Define os-specific buffer macros for subfields */
 #define IX_OSAL_OSBUF_MDATA(osBufPtr) IX_OSAL_MBUF_MDATA(osBufPtr)
              ( ((M_BLK *) osBufPtr)->m_data )
@@ -91,6 +91,6 @@
             } \
         }
 
-#endif // FIXME
+#endif /* FIXME */
 
 #endif /* #define IX_OSAL_OS_BUFFER_MGT_H */
diff --git a/cpu/ixp/npe/include/IxOsalOsTypes.h b/cpu/ixp/npe/include/IxOsalOsTypes.h
index f5f9eca..272eef1 100644
--- a/cpu/ixp/npe/include/IxOsalOsTypes.h
+++ b/cpu/ixp/npe/include/IxOsalOsTypes.h
@@ -17,7 +17,7 @@ typedef u16 USHORT;
 typedef u8 UCHAR;
 typedef u32 BOOL;
 
-#if 0 // FIXME
+#if 0 /* FIXME */
 
 /* Default stack limit is 10 KB */
 #define IX_OSAL_OS_THREAD_DEFAULT_STACK_SIZE  (10240)
@@ -31,7 +31,7 @@ typedef u32 BOOL;
 /* Thread maximum priority (0 - 255). 0 - highest priority */
 #define IX_OSAL_OS_MAX_THREAD_PRIORITY	      (255)
 
-#endif // FIXME
+#endif /* FIXME */
 
 #define IX_OSAL_OS_WAIT_FOREVER (-1L)
 #define IX_OSAL_OS_WAIT_NONE	0
@@ -57,4 +57,4 @@ typedef struct
 } IxOsalOsMessageQueue;
 
 
-#endif // IxOsalOsTypes_H
+#endif /* IxOsalOsTypes_H */
diff --git a/lib_arm/_ashldi3.S b/lib_arm/_ashldi3.S
index 31a2655..de4403d 100644
--- a/lib_arm/_ashldi3.S
+++ b/lib_arm/_ashldi3.S
@@ -44,4 +44,3 @@ __ashldi3:
 	orrmi	ah, ah, al, lsr ip
 	mov	al, al, lsl r2
 	mov	pc, lr
-
diff --git a/lib_arm/_ashrdi3.S b/lib_arm/_ashrdi3.S
index c328413..5edbcb3 100644
--- a/lib_arm/_ashrdi3.S
+++ b/lib_arm/_ashrdi3.S
@@ -44,4 +44,3 @@ __ashrdi3:
 	orrmi	al, al, ah, lsl ip
 	mov	ah, ah, asr r2
 	mov	pc, lr
-