Merge with /home/raj/git/u-boot#440SPe_PCIe_fixes

11 files changed, 191 insertions, 104 deletions

diff --git a/board/amcc/katmai/init.S b/board/amcc/katmai/init.S
index 5202ae6..e3f3da6 100644
--- a/board/amcc/katmai/init.S
+++ b/board/amcc/katmai/init.S
@@ -67,9 +67,9 @@ tlbtabA:
 	tlbentry(CFG_PCIE_MEMBASE, SZ_256M, 0xB0000000, 0xD, AC_R|AC_W|SA_G|SA_I)
 	tlbentry(CFG_PCIE_BASE, SZ_16K, 0x20000000, 0xC, AC_R|AC_W|SA_G|SA_I)
 
-	tlbentry(CFG_PCIE0_CFGBASE, SZ_1K, 0x40000000, 0xC, AC_R|AC_W|SA_G|SA_I)
-	tlbentry(CFG_PCIE1_CFGBASE, SZ_1K, 0x80000000, 0xC, AC_R|AC_W|SA_G|SA_I)
-	tlbentry(CFG_PCIE2_CFGBASE, SZ_1K, 0xC0000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CFG_PCIE0_CFGBASE, SZ_16M, 0x40000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CFG_PCIE1_CFGBASE, SZ_16M, 0x80000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CFG_PCIE2_CFGBASE, SZ_16M, 0xC0000000, 0xC, AC_R|AC_W|SA_G|SA_I)
 	tlbentry(CFG_PCIE0_XCFGBASE, SZ_1K, 0x50000000, 0xC, AC_R|AC_W|SA_G|SA_I)
 	tlbentry(CFG_PCIE1_XCFGBASE, SZ_1K, 0x90000000, 0xC, AC_R|AC_W|SA_G|SA_I)
 	tlbentry(CFG_PCIE2_XCFGBASE, SZ_1K, 0xD0000000, 0xC, AC_R|AC_W|SA_G|SA_I)
@@ -109,9 +109,9 @@ tlbtabB:
 	tlbentry(CFG_PCI_MEMBASE, SZ_256M, 0x10000000, 0xC, AC_R|AC_W|SA_G|SA_I)
 	tlbentry(CFG_PCIE_MEMBASE, SZ_256M, 0xB0000000, 0xD, AC_R|AC_W|SA_G|SA_I)
 
-	tlbentry(CFG_PCIE0_CFGBASE, SZ_1K, 0x00100000, 0xD, AC_R|AC_W|SA_G|SA_I)
-	tlbentry(CFG_PCIE1_CFGBASE, SZ_1K, 0x20100000, 0xD, AC_R|AC_W|SA_G|SA_I)
-	tlbentry(CFG_PCIE2_CFGBASE, SZ_1K, 0x40100000, 0xD, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CFG_PCIE0_CFGBASE, SZ_16M, 0x00000000, 0xD, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CFG_PCIE1_CFGBASE, SZ_16M, 0x20000000, 0xD, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CFG_PCIE2_CFGBASE, SZ_16M, 0x40000000, 0xD, AC_R|AC_W|SA_G|SA_I)
 	tlbentry(CFG_PCIE0_XCFGBASE, SZ_1K, 0x10000000, 0xD, AC_R|AC_W|SA_G|SA_I)
 	tlbentry(CFG_PCIE1_XCFGBASE, SZ_1K, 0x30000000, 0xD, AC_R|AC_W|SA_G|SA_I)
 	tlbentry(CFG_PCIE2_XCFGBASE, SZ_1K, 0x50000000, 0xD, AC_R|AC_W|SA_G|SA_I)
diff --git a/board/amcc/katmai/katmai.c b/board/amcc/katmai/katmai.c
index b804d55..afd60ec 100644
--- a/board/amcc/katmai/katmai.c
+++ b/board/amcc/katmai/katmai.c
@@ -392,16 +392,18 @@ int katmai_pcie_card_present(int port)
 
 static struct pci_controller pcie_hose[3] = {{0},{0},{0}};
 
-void pcie_setup_hoses(void)
+void pcie_setup_hoses(int busno)
 {
 	struct pci_controller *hose;
 	int i, bus;
+	char *env;
+	unsigned int delay;
 
 	/*
 	 * assume we're called after the PCIX hose is initialized, which takes
 	 * bus ID 0 and therefore start numbering PCIe's from 1.
 	 */
-	bus = 1;
+	bus = busno;
 	for (i = 0; i <= 2; i++) {
 		/* Check for katmai card presence */
 		if (!katmai_pcie_card_present(i))
@@ -418,8 +420,8 @@ void pcie_setup_hoses(void)
 
 		hose = &pcie_hose[i];
 		hose->first_busno = bus;
-		hose->last_busno  = bus;
-		bus++;
+		hose->last_busno = bus;
+		hose->current_busno = bus;
 
 		/* setup mem resource */
 		pci_set_region(hose->regions + 0,
@@ -439,10 +441,21 @@ void pcie_setup_hoses(void)
 		 */
 #else
 		ppc440spe_setup_pcie_rootpoint(hose, i);
+
+		env = getenv ("pciscandelay");
+		if (env != NULL) {
+			delay = simple_strtoul (env, NULL, 10);
+			if (delay > 5)
+				printf ("Warning, expect noticable delay before PCIe"
+					"scan due to 'pciscandelay' value!\n");
+			mdelay (delay * 1000);
+		}
+
 		/*
 		 * Config access can only go down stream
 		 */
 		hose->last_busno = pci_hose_scan(hose);
+		bus = hose->last_busno + 1;
 #endif
 	}
 }
diff --git a/board/amcc/yucca/init.S b/board/amcc/yucca/init.S
index c92dcf7..67e8f8f 100644
--- a/board/amcc/yucca/init.S
+++ b/board/amcc/yucca/init.S
@@ -70,9 +70,9 @@ tlbtabA:
 	tlbentry(CFG_PCIE_MEMBASE, SZ_256M, 0xB0000000, 0xD, AC_R|AC_W|SA_G|SA_I)
 	tlbentry(CFG_PCIE_BASE, SZ_16K, 0x20000000, 0xC, AC_R|AC_W|SA_G|SA_I)
 
-	tlbentry(CFG_PCIE0_CFGBASE, SZ_1K, 0x40000000, 0xC, AC_R|AC_W|SA_G|SA_I)
-	tlbentry(CFG_PCIE1_CFGBASE, SZ_1K, 0x80000000, 0xC, AC_R|AC_W|SA_G|SA_I)
-	tlbentry(CFG_PCIE2_CFGBASE, SZ_1K, 0xC0000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CFG_PCIE0_CFGBASE, SZ_16M, 0x40000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CFG_PCIE1_CFGBASE, SZ_16M, 0x80000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CFG_PCIE2_CFGBASE, SZ_16M, 0xC0000000, 0xC, AC_R|AC_W|SA_G|SA_I)
 	tlbentry(CFG_PCIE0_XCFGBASE, SZ_1K, 0x50000000, 0xC, AC_R|AC_W|SA_G|SA_I)
 	tlbentry(CFG_PCIE1_XCFGBASE, SZ_1K, 0x90000000, 0xC, AC_R|AC_W|SA_G|SA_I)
 	tlbentry(CFG_PCIE2_XCFGBASE, SZ_1K, 0xD0000000, 0xC, AC_R|AC_W|SA_G|SA_I)
@@ -112,9 +112,9 @@ tlbtabB:
 	tlbentry(CFG_PCI_MEMBASE, SZ_256M, 0x10000000, 0xC, AC_R|AC_W|SA_G|SA_I)
 	tlbentry(CFG_PCIE_MEMBASE, SZ_256M, 0xB0000000, 0xD, AC_R|AC_W|SA_G|SA_I)
 
-	tlbentry(CFG_PCIE0_CFGBASE, SZ_1K, 0x00100000, 0xD, AC_R|AC_W|SA_G|SA_I)
-	tlbentry(CFG_PCIE1_CFGBASE, SZ_1K, 0x20100000, 0xD, AC_R|AC_W|SA_G|SA_I)
-	tlbentry(CFG_PCIE2_CFGBASE, SZ_1K, 0x40100000, 0xD, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CFG_PCIE0_CFGBASE, SZ_16M, 0x00000000, 0xD, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CFG_PCIE1_CFGBASE, SZ_16M, 0x20000000, 0xD, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CFG_PCIE2_CFGBASE, SZ_16M, 0x40000000, 0xD, AC_R|AC_W|SA_G|SA_I)
 	tlbentry(CFG_PCIE0_XCFGBASE, SZ_1K, 0x10000000, 0xD, AC_R|AC_W|SA_G|SA_I)
 	tlbentry(CFG_PCIE1_XCFGBASE, SZ_1K, 0x30000000, 0xD, AC_R|AC_W|SA_G|SA_I)
 	tlbentry(CFG_PCIE2_XCFGBASE, SZ_1K, 0x50000000, 0xD, AC_R|AC_W|SA_G|SA_I)
diff --git a/board/amcc/yucca/yucca.c b/board/amcc/yucca/yucca.c
index d08fcf3..397b018 100644
--- a/board/amcc/yucca/yucca.c
+++ b/board/amcc/yucca/yucca.c
@@ -846,16 +846,18 @@ void yucca_setup_pcie_fpga_endpoint(int port)
 
 static struct pci_controller pcie_hose[3] = {{0},{0},{0}};
 
-void pcie_setup_hoses(void)
+void pcie_setup_hoses(int busno)
 {
 	struct pci_controller *hose;
 	int i, bus;
+	char *env;
+	unsigned int delay;
 
 	/*
 	 * assume we're called after the PCIX hose is initialized, which takes
 	 * bus ID 0 and therefore start numbering PCIe's from 1.
 	 */
-	bus = 1;
+	bus = busno;
 	for (i = 0; i <= 2; i++) {
 		/* Check for yucca card presence */
 		if (!yucca_pcie_card_present(i))
@@ -874,8 +876,8 @@ void pcie_setup_hoses(void)
 
 		hose = &pcie_hose[i];
 		hose->first_busno = bus;
-		hose->last_busno  = bus;
-		bus++;
+		hose->last_busno = bus;
+		hose->current_busno = bus;
 
 		/* setup mem resource */
 		pci_set_region(hose->regions + 0,
@@ -895,10 +897,21 @@ void pcie_setup_hoses(void)
 		 */
 #else
 		ppc440spe_setup_pcie_rootpoint(hose, i);
+
+		env = getenv ("pciscandelay");
+		if (env != NULL) {
+			delay = simple_strtoul (env, NULL, 10);
+			if (delay > 5)
+				printf ("Warning, expect noticable delay before PCIe"
+					"scan due to 'pciscandelay' value!\n");
+			mdelay (delay * 1000);
+		}
+
 		/*
 		 * Config access can only go down stream
 		 */
 		hose->last_busno = pci_hose_scan(hose);
+		bus = hose->last_busno + 1;
 #endif
 	}
 }
diff --git a/cpu/ppc4xx/405gp_pci.c b/cpu/ppc4xx/405gp_pci.c
index 2837929..282e7a1 100644
--- a/cpu/ppc4xx/405gp_pci.c
+++ b/cpu/ppc4xx/405gp_pci.c
@@ -443,7 +443,7 @@ void pci_init_board(void)
 static struct pci_controller ppc440_hose = {0};
 
 
-void pci_440_init (struct pci_controller *hose)
+int pci_440_init (struct pci_controller *hose)
 {
 	int reg_num = 0;
 
@@ -459,7 +459,7 @@ void pci_440_init (struct pci_controller *hose)
 	if ((strap & SDR0_SDSTP1_PISE_MASK) == 0) {
 		printf("PCI: SDR0_STRP1[PISE] not set.\n");
 		printf("PCI: Configuration aborted.\n");
-		return;
+		return -1;
 	}
 #elif defined(CONFIG_440GP)
 	unsigned long strap;
@@ -468,7 +468,7 @@ void pci_440_init (struct pci_controller *hose)
 	if ((strap & CPC0_STRP1_PISE_MASK) == 0) {
 		printf("PCI: CPC0_STRP1[PISE] not set.\n");
 		printf("PCI: Configuration aborted.\n");
-		return;
+		return -1;
 	}
 #endif
 #endif /* CONFIG_DISABLE_PISE_TEST */
@@ -477,7 +477,7 @@ void pci_440_init (struct pci_controller *hose)
 	 * PCI controller init
 	 *--------------------------------------------------------------------------*/
 	hose->first_busno = 0;
-	hose->last_busno = 0xff;
+	hose->last_busno = 0;
 
 	/* PCI I/O space */
 	pci_set_region(hose->regions + reg_num++,
@@ -515,7 +515,7 @@ void pci_440_init (struct pci_controller *hose)
 	if (pci_pre_init (hose) == 0) {
 		printf("PCI: Board-specific initialization failed.\n");
 		printf("PCI: Configuration aborted.\n");
-		return;
+		return -1;
 	}
 
 	pci_register_hose( hose );
@@ -578,13 +578,16 @@ void pci_440_init (struct pci_controller *hose)
 #endif
 		hose->last_busno = pci_hose_scan(hose);
 	}
+	return hose->last_busno;
 }
 
 void pci_init_board(void)
 {
-	pci_440_init (&ppc440_hose);
+	int busno;
+
+	busno = pci_440_init (&ppc440_hose);
 #if defined(CONFIG_440SPE)
-	pcie_setup_hoses();
+	pcie_setup_hoses(busno + 1);
 #endif
 }
 
diff --git a/cpu/ppc4xx/440spe_pcie.c b/cpu/ppc4xx/440spe_pcie.c
index bf68cc1..158f1c5 100644
--- a/cpu/ppc4xx/440spe_pcie.c
+++ b/cpu/ppc4xx/440spe_pcie.c
@@ -40,73 +40,126 @@ enum {
 	LNKW_X8			= 0x8
 };
 
-static inline int pcie_in_8(const volatile unsigned char __iomem *addr)
+static u8* pcie_get_base(struct pci_controller *hose, unsigned int devfn)
 {
-	int ret;
-
-	PCIE_IN(lbzx, ret, addr);
+	u8 *base = (u8*)hose->cfg_data;
+
+	/* use local configuration space for the first bus */
+	if (PCI_BUS(devfn) == 0) {
+		if (hose->cfg_data == (u8*)CFG_PCIE0_CFGBASE)
+			base = (u8*)CFG_PCIE0_XCFGBASE;
+		if (hose->cfg_data == (u8*)CFG_PCIE1_CFGBASE)
+			base = (u8*)CFG_PCIE1_XCFGBASE;
+		if (hose->cfg_data == (u8*)CFG_PCIE2_CFGBASE)
+			base = (u8*)CFG_PCIE2_XCFGBASE;
+	}
 
-	return ret;
+	return base;
 }
 
-static inline int pcie_in_le16(const volatile unsigned short __iomem *addr)
+static void pcie_dmer_disable(void)
 {
-	int ret;
-
-	PCIE_IN(lhbrx, ret, addr)
-
-	return ret;
+	mtdcr (DCRN_PEGPL_CFG(DCRN_PCIE0_BASE),
+		mfdcr (DCRN_PEGPL_CFG(DCRN_PCIE0_BASE)) | GPL_DMER_MASK_DISA);
+	mtdcr (DCRN_PEGPL_CFG(DCRN_PCIE1_BASE),
+		mfdcr (DCRN_PEGPL_CFG(DCRN_PCIE1_BASE)) | GPL_DMER_MASK_DISA);
+	mtdcr (DCRN_PEGPL_CFG(DCRN_PCIE2_BASE),
+		mfdcr (DCRN_PEGPL_CFG(DCRN_PCIE2_BASE)) | GPL_DMER_MASK_DISA);
 }
 
-static inline unsigned pcie_in_le32(const volatile unsigned __iomem *addr)
+static void pcie_dmer_enable(void)
 {
-	unsigned ret;
-
-	PCIE_IN(lwbrx, ret, addr);
-
-	return ret;
+	mtdcr (DCRN_PEGPL_CFG (DCRN_PCIE0_BASE),
+		mfdcr (DCRN_PEGPL_CFG(DCRN_PCIE0_BASE)) & ~GPL_DMER_MASK_DISA);
+	mtdcr (DCRN_PEGPL_CFG (DCRN_PCIE1_BASE),
+		mfdcr (DCRN_PEGPL_CFG(DCRN_PCIE1_BASE)) & ~GPL_DMER_MASK_DISA);
+	mtdcr (DCRN_PEGPL_CFG (DCRN_PCIE2_BASE),
+		mfdcr (DCRN_PEGPL_CFG(DCRN_PCIE2_BASE)) & ~GPL_DMER_MASK_DISA);
 }
 
-
 static int pcie_read_config(struct pci_controller *hose, unsigned int devfn,
 	int offset, int len, u32 *val) {
 
+	u8 *address;
 	*val = 0;
+
+	/*
+	 * Bus numbers are relative to hose->first_busno
+	 */
+	devfn -= PCI_BDF(hose->first_busno, 0, 0);
+
 	/*
-	 * 440SPE implements only one function per port
+	 * NOTICE: configuration space ranges are currenlty mapped only for
+	 * the first 16 buses, so such limit must be imposed. In case more
+	 * buses are required the TLB settings in board/amcc/<board>/init.S
+	 * need to be altered accordingly (one bus takes 1 MB of memory space).
 	 */
-	if (!((PCI_FUNC(devfn) == 0) && (PCI_DEV(devfn) == 1)))
+	if (PCI_BUS(devfn) >= 16)
 		return 0;
 
-	devfn = PCI_BDF(0,0,0);
+	/*
+	 * Only single device/single function is supported for the primary and
+	 * secondary buses of the 440SPe host bridge.
+	 */
+	if ((!((PCI_FUNC(devfn) == 0) && (PCI_DEV(devfn) == 0))) &&
+		((PCI_BUS(devfn) == 0) || (PCI_BUS(devfn) == 1)))
+		return 0;
+		
+	address = pcie_get_base(hose, devfn);
 	offset += devfn << 4;
 
+	/*
+	 * Reading from configuration space of non-existing device can
+	 * generate transaction errors. For the read duration we suppress
+	 * assertion of machine check exceptions to avoid those.
+	 */
+	pcie_dmer_disable ();
+
 	switch (len) {
 	case 1:
-		*val = pcie_in_8(hose->cfg_data + offset);
+		*val = in_8(hose->cfg_data + offset);
 		break;
 	case 2:
-		*val = pcie_in_le16((u16 *)(hose->cfg_data + offset));
+		*val = in_le16((u16 *)(hose->cfg_data + offset));
 		break;
 	default:
-		*val = pcie_in_le32((u32*)(hose->cfg_data + offset));
+		*val = in_le32((u32*)(hose->cfg_data + offset));
 		break;
 	}
+
+	pcie_dmer_enable ();
+
 	return 0;
 }
 
 static int pcie_write_config(struct pci_controller *hose, unsigned int devfn,
 	int offset, int len, u32 val) {
 
+	u8 *address;
+	
+	/*
+	 * Bus numbers are relative to hose->first_busno
+	 */
+	devfn -= PCI_BDF(hose->first_busno, 0, 0);
+	
 	/*
-	 * 440SPE implements only one function per port
+	 * Same constraints as in pcie_read_config().
 	 */
-	if (!((PCI_FUNC(devfn) == 0) && (PCI_DEV(devfn) == 1)))
+	if (PCI_BUS(devfn) >= 16)
 		return 0;
 
-	devfn = PCI_BDF(0,0,0);
+	if ((!((PCI_FUNC(devfn) == 0) && (PCI_DEV(devfn) == 0))) &&
+		((PCI_BUS(devfn) == 0) || (PCI_BUS(devfn) == 1)))
+		return 0;
+	
+	address = pcie_get_base(hose, devfn);
 	offset += devfn << 4;
 
+	/*
+	 * Suppress MCK exceptions, similar to pcie_read_config()
+	 */
+	pcie_dmer_disable ();
+
 	switch (len) {
 	case 1:
 		out_8(hose->cfg_data + offset, val);
@@ -118,6 +171,9 @@ static int pcie_write_config(struct pci_controller *hose, unsigned int devfn,
 		out_le32((u32 *)(hose->cfg_data + offset), val);
 		break;
 	}
+
+	pcie_dmer_enable ();
+
 	return 0;
 }
 
@@ -126,7 +182,7 @@ int pcie_read_config_byte(struct pci_controller *hose,pci_dev_t dev,int offset,u
 	u32 v;
 	int rv;
 
-	rv =  pcie_read_config(hose, dev, offset, 1, &v);
+	rv = pcie_read_config(hose, dev, offset, 1, &v);
 	*val = (u8)v;
 	return rv;
 }
@@ -783,12 +839,12 @@ void ppc440spe_setup_pcie_rootpoint(struct pci_controller *hose, int port)
 	volatile void *rmbase = NULL;
 
 	pci_set_ops(hose,
-		    pcie_read_config_byte,
-		    pcie_read_config_word,
-		    pcie_read_config_dword,
-		    pcie_write_config_byte,
-		    pcie_write_config_word,
-		    pcie_write_config_dword);
+		pcie_read_config_byte,
+		pcie_read_config_word,
+		pcie_read_config_dword,
+		pcie_write_config_byte,
+		pcie_write_config_word,
+		pcie_write_config_dword);
 
 	switch (port) {
 	case 0:
@@ -811,14 +867,9 @@ void ppc440spe_setup_pcie_rootpoint(struct pci_controller *hose, int port)
 	/*
 	 * Set bus numbers on our root port
 	 */
-	if (ppc440spe_revB()) {
-		out_8((u8 *)mbase + PCI_PRIMARY_BUS, 0);
-		out_8((u8 *)mbase + PCI_SECONDARY_BUS, 1);
-		out_8((u8 *)mbase + PCI_SUBORDINATE_BUS, 1);
-	} else {
-		out_8((u8 *)mbase + PCI_PRIMARY_BUS, 0);
-		out_8((u8 *)mbase + PCI_SECONDARY_BUS, 0);
-	}
+	out_8((u8 *)mbase + PCI_PRIMARY_BUS, 0);
+	out_8((u8 *)mbase + PCI_SECONDARY_BUS, 1);
+	out_8((u8 *)mbase + PCI_SUBORDINATE_BUS, 1);
 
 	/*
 	 * Set up outbound translation to hose->mem_space from PLB
@@ -875,6 +926,29 @@ void ppc440spe_setup_pcie_rootpoint(struct pci_controller *hose, int port)
 		 in_le16((u16 *)(mbase + PCI_COMMAND)) |
 		 PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
 	printf("PCIE:%d successfully set as rootpoint\n",port);
+	
+	/* Set Device and Vendor Id */
+	switch (port) {
+	case 0:
+		out_le16(mbase + 0x200, 0xaaa0);
+		out_le16(mbase + 0x202, 0xbed0);
+		break;
+	case 1:
+		out_le16(mbase + 0x200, 0xaaa1);
+		out_le16(mbase + 0x202, 0xbed1);
+		break;
+	case 2:
+		out_le16(mbase + 0x200, 0xaaa2);
+		out_le16(mbase + 0x202, 0xbed2);
+		break;
+	default:
+		out_le16(mbase + 0x200, 0xaaa3);
+		out_le16(mbase + 0x202, 0xbed3);
+	}
+
+	/* Set Class Code to PCI-PCI bridge and Revision Id to 1 */
+	out_le32(mbase + 0x208, 0x06040001);
+
 }
 
 int ppc440spe_setup_pcie_endpoint(struct pci_controller *hose, int port)
@@ -952,8 +1026,8 @@ int ppc440spe_setup_pcie_endpoint(struct pci_controller *hose, int port)
 
 	/* Enable I/O, Mem, and Busmaster cycles */
 	out_le16((u16 *)(mbase + PCI_COMMAND),
-		 in_le16((u16 *)(mbase + PCI_COMMAND)) |
-		 PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
+		in_le16((u16 *)(mbase + PCI_COMMAND)) |
+		PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
 	out_le16(mbase + 0x200,0xcaad);			/* Setting vendor ID */
 	out_le16(mbase + 0x202,0xfeed);			/* Setting device ID */
 	attempts = 10;
diff --git a/cpu/ppc4xx/440spe_pcie.h b/cpu/ppc4xx/440spe_pcie.h
index eb7cecf..38745eb 100644
--- a/cpu/ppc4xx/440spe_pcie.h
+++ b/cpu/ppc4xx/440spe_pcie.h
@@ -38,6 +38,7 @@
 #define DCRN_PEGPL_REGBAL(base)		(base + 0x13)
 #define DCRN_PEGPL_REGMSK(base)		(base + 0x14)
 #define DCRN_PEGPL_SPECIAL(base)	(base + 0x15)
+#define DCRN_PEGPL_CFG(base)		(base + 0x16)
 
 /*
  * System DCRs (SDRs)
@@ -161,20 +162,7 @@
 	mtdcr(DCRN_SDR0_CFGADDR, offset); \
 	mtdcr(DCRN_SDR0_CFGDATA,data);})
 
-#define PCIE_IN(opcode, ret, addr) \
-	__asm__ __volatile__(			\
-		"sync\n"			\
-		#opcode " %0,0,%1\n"		\
-		"1: twi 0,%0,0\n"		\
-		"isync\n"			\
-		"b 3f\n"			\
-		"2: li %0,-1\n"			\
-		"3:\n"				\
-		".section __ex_table,\"a\"\n"	\
-		".balign 4\n"			\
-		".long 1b,2b\n"			\
-		".previous\n"			\
-		: "=r" (ret) : "r" (addr), "m" (*addr));
+#define GPL_DMER_MASK_DISA	0x02000000
 
 int ppc440spe_init_pcie(void);
 int ppc440spe_init_pcie_rootport(int port);
diff --git a/cpu/ppc4xx/traps.c b/cpu/ppc4xx/traps.c
index f5365cb..38b6f89 100644
--- a/cpu/ppc4xx/traps.c
+++ b/cpu/ppc4xx/traps.c
@@ -151,12 +151,6 @@ MachineCheckException(struct pt_regs *regs)
 	int uncorr_ecc = 0;
 #endif
 
-	/* Probing PCI(E) using config cycles may cause this exception
-	 * when a device is not present. To gracefully recover in such
-	 * scenarios config read/write routines need to be instrumented in
-	 * order to return via fixup handler. For examples refer to
-	 * pcie_in_8(), pcie_in_le16() and pcie_in_le32()
-	 */
 	if ((fixup = search_exception_table(regs->nip)) != 0) {
 		regs->nip = fixup;
 		val = mfspr(MCSR);
diff --git a/include/common.h b/include/common.h
index 9a5a0ab..aca281b 100644
--- a/include/common.h
+++ b/include/common.h
@@ -275,7 +275,7 @@ void	pciinfo	      (int, int);
 #   endif
     int	    is_pci_host		(struct pci_controller *);
 #if defined(CONFIG_440SPE)
-   void pcie_setup_hoses(void);
+   void pcie_setup_hoses(int busno);
 #endif
 #endif
 
diff --git a/include/configs/katmai.h b/include/configs/katmai.h
index b6d0f51..7908e5a 100644
--- a/include/configs/katmai.h
+++ b/include/configs/katmai.h
@@ -66,11 +66,11 @@
 #define CFG_PCIE_BASE		0xe0000000	/* PCIe UTL regs */
 
 #define CFG_PCIE0_CFGBASE	0xc0000000
-#define CFG_PCIE0_XCFGBASE	0xc0000400
-#define CFG_PCIE1_CFGBASE	0xc0001000
-#define CFG_PCIE1_XCFGBASE	0xc0001400
-#define CFG_PCIE2_CFGBASE	0xc0002000
-#define CFG_PCIE2_XCFGBASE	0xc0002400
+#define CFG_PCIE1_CFGBASE	0xc1000000
+#define CFG_PCIE2_CFGBASE	0xc2000000
+#define CFG_PCIE0_XCFGBASE	0xc3000000
+#define CFG_PCIE1_XCFGBASE	0xc3001000
+#define CFG_PCIE2_XCFGBASE	0xc3002000
 
 /* System RAM mapped to PCI space */
 #define CONFIG_PCI_SYS_MEM_BUS	CFG_SDRAM_BASE
@@ -201,6 +201,7 @@
 		"setenv filesize;saveenv\0"				\
 	"upd=run load;run update\0"					\
 	"kozio=bootm ffc60000\0"					\
+	"pciconfighost=1\0"						\
 	""
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
@@ -322,7 +323,7 @@
 #define CONFIG_PCI			/* include pci support		*/
 #define CONFIG_PCI_PNP		1	/* do pci plug-and-play		*/
 #define CONFIG_PCI_SCAN_SHOW	1	/* show pci devices on startup	*/
-#undef CONFIG_PCI_CONFIG_HOST_BRIDGE
+#define CONFIG_PCI_CONFIG_HOST_BRIDGE
 
 /* Board-specific PCI */
 #define CFG_PCI_TARGET_INIT		/* let board init pci target    */
diff --git a/include/configs/yucca.h b/include/configs/yucca.h
index 906f046..74033b4 100644
--- a/include/configs/yucca.h
+++ b/include/configs/yucca.h
@@ -68,11 +68,11 @@
 #define CFG_PCIE_BASE		0xe0000000	/* PCIe UTL regs */
 
 #define CFG_PCIE0_CFGBASE	0xc0000000
-#define CFG_PCIE0_XCFGBASE	0xc0000400
-#define CFG_PCIE1_CFGBASE	0xc0001000
-#define CFG_PCIE1_XCFGBASE	0xc0001400
-#define CFG_PCIE2_CFGBASE	0xc0002000
-#define CFG_PCIE2_XCFGBASE	0xc0002400
+#define CFG_PCIE1_CFGBASE	0xc1000000
+#define CFG_PCIE2_CFGBASE	0xc2000000
+#define CFG_PCIE0_XCFGBASE	0xc3000000
+#define CFG_PCIE1_XCFGBASE	0xc3001000
+#define CFG_PCIE2_XCFGBASE	0xc3002000
 
 /* System RAM mapped to PCI space */
 #define CONFIG_PCI_SYS_MEM_BUS	CFG_SDRAM_BASE
@@ -182,6 +182,7 @@
 		"cp.b ${fileaddr} FFFB0000 ${filesize};"		\
 		"setenv filesize;saveenv\0"				\
 	"upd=run load;run update\0"					\
+	"pciconfighost=1\0"						\
 	""
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
@@ -297,7 +298,7 @@
 #define CONFIG_PCI			/* include pci support		*/
 #define CONFIG_PCI_PNP		1	/* do pci plug-and-play		*/
 #define CONFIG_PCI_SCAN_SHOW	1	/* show pci devices on startup	*/
-#undef CONFIG_PCI_CONFIG_HOST_BRIDGE
+#define CONFIG_PCI_CONFIG_HOST_BRIDGE
 
 /* Board-specific PCI */
 #define CFG_PCI_TARGET_INIT		/* let board init pci target    */