diff options
| author | Peter Pearse <peter.pearse@arm.com> | 2007-05-18 14:34:19 +0100 |
|---|---|---|
| committer | Peter Pearse <peter.pearse@arm.com> | 2007-05-18 14:34:19 +0100 |
| commit | 879027daa838d245bf433ca2bb446bedace724f0 (patch) | |
| tree | 663792e944d667843d77f81dd3d5ab56ffa7f098 | |
| parent | 93ef45c9ddfdd9fc17c4e74bd8e2f2456580eb72 (diff) | |
| parent | 70124c2602ae2d4c5d3dba05b482d91548242de8 (diff) | |
| download | u-boot-imx-879027daa838d245bf433ca2bb446bedace724f0.zip u-boot-imx-879027daa838d245bf433ca2bb446bedace724f0.tar.gz u-boot-imx-879027daa838d245bf433ca2bb446bedace724f0.tar.bz2 | |
Merge with git://www.denx.de/git/u-boot.git
51 files changed, 2907 insertions, 375 deletions
@@ -1,3 +1,237 @@ +commit d62f64cc23a940eafe712c776b3249e4160753d1 +Author: Wolfgang Denk <wd@denx.de> +Date: Wed May 16 00:13:33 2007 +0200 + + Coding Style Cleanup, new CHANGELOG + +commit 7d98ba770a7eaefa29ce927f31a0956df85bf650 +Author: Piotr Kruszynski <ppk@semihalf.com> +Date: Thu May 10 16:55:52 2007 +0200 + + [Motion-PRO] Add MTD and JFFS2 support, also add default partition + definition. + +commit e69f66c6ebe82bbbd1da766bc4eda40ec7ee5af1 +Author: Michal Simek <monstr@monstr.eu> +Date: Tue May 8 15:57:43 2007 +0200 + + add: reading special purpose registers + +commit 1a50f164beb065f360fbddb76029607d6b099698 +Author: Michal Simek <monstr@monstr.eu> +Date: Tue May 8 14:52:52 2007 +0200 + + add: Microblaze V5 exception handling + +commit ab874d5047e5d30dbc1e517ff26083efffa98ecb +Author: Michal Simek <monstr@monstr.eu> +Date: Tue May 8 14:39:11 2007 +0200 + + add: FSL control read and write + +commit de1de02a7cbf05e6b63e0d8ffc624f12493f6ba3 +Author: Piotr Kruszynski <ppk@semihalf.com> +Date: Tue May 8 13:05:44 2007 +0200 + + [Motion-PRO] Add support for I2C, EEPROM and RTC. + +commit fa5c2ba123b1bf88455bfc21db5e786ca045029d +Author: Bartlomiej Sieka <tur@semihalf.com> +Date: Tue May 8 10:23:56 2007 +0200 + + [Motion-PRO] Add ATA support. Add CF-booting commands to the default + environment. + +commit 06241d50a3ab1b20a0b08baeeaffcaa23ae4b839 +Author: Bartlomiej Sieka <tur@semihalf.com> +Date: Tue May 8 09:39:12 2007 +0200 + + [Motion-PRO] Change IPB clock frequency from 50MHz to 100MHz. This + eliminates networking problems in Linux (timeouts). + +commit 1f1369c34b629be94702684d41d3fddf0f6193e7 +Author: Bartlomiej Sieka <tur@semihalf.com> +Date: Tue May 8 09:21:57 2007 +0200 + + [Motion-PRO] Enable Flat Device Tree support and modify default environment + to allow booting of FDT-expecting kernels. + +commit fb05f6da35ea1c15c553abe6f23f656bf18dc5db +Author: Michal Simek <monstr@monstr.eu> +Date: Mon May 7 23:58:31 2007 +0200 + + new: USE_MSR_INTR support + +commit 008861a2f3ef2c062744d733787c7e530a1b8761 +Author: Bartlomiej Sieka <tur@semihalf.com> +Date: Mon May 7 22:36:15 2007 +0200 + + [MPC5xxx] There are networking problems on the Motion-PRO board with + current PHY initalization code (tftp timeouts all the time). This commit + temporarily disables PHY initalization sequence to make the networking + operational, until a fix is found. + +commit abca901869c3760b6c5fecb825db6c1d91a78a93 +Author: Wolfgang Denk <wd@denx.de> +Date: Mon May 7 22:10:36 2007 +0200 + + Get rid of duplicated file (see include/configs/sbc8560.h instead) + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 207b7b2c9d9752e0f6478c30c29b7087f6e6cbb6 +Author: Wolfgang Denk <wd@denx.de> +Date: Mon May 7 22:07:08 2007 +0200 + + Get rid of duplicated file (see doc/README.SBC8560 instead) + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit a7bac7e9b57ba948051beb19ec5be3a75ce75383 +Author: Michal Simek <monstr@monstr.eu> +Date: Mon May 7 19:43:10 2007 +0200 + + fix: read and write MSR - repair number of parameters + +commit 19bf1fbad7f19d5a120be9b1daf136e052fcab39 +Author: Michal Simek <monstr@monstr.eu> +Date: Mon May 7 19:33:51 2007 +0200 + + new: fsl interrupt support + FSL_Has_data is connected to INTC. + +commit 792032baa7d625e34c981ab6df521911bd8dc861 +Author: Michal Simek <monstr@monstr.eu> +Date: Mon May 7 19:30:12 2007 +0200 + + fix: interrupt handler + remove asm code + +commit f3f001a341ef185d0f13841be5b5dc3395aacc31 +Author: Michal Simek <monstr@monstr.eu> +Date: Mon May 7 19:25:08 2007 +0200 + + fix: remove asm code + +commit fb7c2dbef02c9f6f8d7b04ec4c2bfb91418b9c01 +Author: Michal Simek <monstr@monstr.eu> +Date: Mon May 7 19:12:43 2007 +0200 + + fix: clean interrupt + +commit 42efed6130c8fcf7da881385b5427065d2801757 +Author: Michal Simek <monstr@monstr.eu> +Date: Mon May 7 17:22:25 2007 +0200 + + fix: interrupt handler for multiple sources + +commit 48fbd3a4cdabbebc1debd7eed73c00c2caf914f6 +Author: Michal Simek <monstr@monstr.eu> +Date: Mon May 7 17:11:09 2007 +0200 + + new: add writing to msr register + +commit ac4cd59d59c9bf3f89cb7a344abf8184d678f562 +Author: Timur Tabi <timur@freescale.com> +Date: Sat May 5 08:12:30 2007 +0200 + + 5xxx: write MAC address to mac-address and local-mac-address + + Some device trees have a mac-address property, some have local-mac-address, + and some have both. To support all of these device trees, ftp_cpu_setup() + should write the MAC address to mac-address and local-mac-address, if they + exist. + + Signed-off-by: Timur Tabi <timur@freescale.com> + Acked-by: Grant Likely <grant.likely@secretlab.ca> + +commit a9d87e2707dcb249f6bb7f7ff7e00acd8cda9fd2 +Author: Grzegorz Wianecki <grzegorz.wianecki@gmail.com> +Date: Sun Apr 29 14:01:54 2007 +0200 + + [PATCH] Use PVR to distinguish MPC5200B from MPC5200 in boot message + + MPC5200B systems are incorrectly reported as MPC5200 in U-Boot start-up + message. Use PVR to distinguish between the two variants, and print proper CPU + information. + + Signed-off-by: Grzegorz Wianecki <grzegorz.wianecki@gmail.com> + Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> + Signed-off-by: Grant Likely <grant.likely@secretlab.ca> + +commit 4ec5bd55ed1ffa91a774af298769621f4fbb18c1 +Author: Ladislav Michl <ladis@linux-mips.org> +Date: Wed Apr 25 16:01:26 2007 +0200 + + [PATCH] simplify silent console + + Signed-off-by: Ladislav Michl <ladis@linux-mips.org> + Acked-by: Stefan Roese <sr@denx.de> + +commit b7598a43f2b421a713d8135e98a42c37d9eb9df0 +Author: Sergei Shtylyov <sshtylyov@ru.mvista.com> +Date: Mon Apr 23 15:30:39 2007 +0200 + + [PATCH] Avoid assigning PCI resources from zero address + + If a PCI IDE card happens to get a zero address assigned to it, the Linux IDE + core complains and IDE drivers fails to work. Also, assigning zero to a BAR + was illegal according to PCI 2.1 (the later revisions seem to have excluded the + sentence about "0" being considered an invalid address) -- so, use a reasonable + starting value of 0x1000 (that's what the most Linux archs are using). + + Alternatively, one might have fixed the calls to pci_set_region() individually + (some code even seems to have taken care of this issue) but that would have + been a lot more work. :-) + + Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> + Acked-by: Stefan Roese <sr@denx.de> + +commit 9ffd451afeb08e5be7ddae680487ec962b2bca25 +Author: Jeffrey Mann <mannj@embeddedplanet.com> +Date: Mon Apr 23 14:00:11 2007 +0200 + + [patch] setenv(...) can delete environmentalvariables + + update setenv() function so that entering a NULL value for the + variable's value will delete the environmental variable + + Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com> + Acked-by: Stefan Roese <sr@denx.de> + +commit ebd0a0ae05a44769c4e27458ad4e9f3438250443 +Author: Mike Frysinger <vapier@gentoo.org> +Date: Mon Apr 23 13:54:24 2007 +0200 + + [patch] use unsigned char in smc91111 driver for mac + + the v_mac variable in the smc91111 driver is declared as a signed char ... + this causes problems when one of the bytes in the MAC is "signed" like 0xE0 + because when it gets printed out, you get a display like: + 0xFFFFFFE0 and that's no good + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit ffc50f9bb194343c6303517a517708457a5eb6b8 +Author: Michal Simek <monstr@monstr.eu> +Date: Sat May 5 18:54:42 2007 +0200 + + new: FSL and MSR support #2 + +commit f7e2e0eb0668136305f78bb9c21be79b48a34247 +Author: Michal Simek <monstr@monstr.eu> +Date: Sat May 5 18:27:16 2007 +0200 + + new: FSL and MSR support + +commit 2f15278c2eb911c668b4fe562130b78cf554d139 +Author: Wolfgang Denk <wd@denx.de> +Date: Sat May 5 18:23:11 2007 +0200 + + Coding stylke cleanup; update CHANGELOG. + + Signed-off-by: Wolfgang Denk <wd@denx.de> + commit 885ec89b648a899a2f32393fd3ffd9f7234c4402 Author: Wolfgang Denk <wd@denx.de> Date: Sat May 5 18:05:02 2007 +0200 @@ -67,6 +301,14 @@ Date: Fri May 4 10:02:33 2007 +0200 Signed-off-by: Wolfgang Denk <wd@denx.de> +commit 068aab660bc3912b930be5540e6b3f3fd6ad3c96 +Author: Kim Phillips <kim.phillips@freescale.com> +Date: Thu May 3 19:43:52 2007 -0500 + + mpc83xx: fix trivial error in MAKEALL + + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + commit c64a89d6ce8584b9fc64f4e85da9ecac3cfc2c2a Author: Wolfgang Denk <wd@denx.de> Date: Thu May 3 16:34:41 2007 +0200 @@ -148,6 +390,33 @@ Date: Wed Feb 7 15:28:04 2007 -0600 Signed-off-by: James Yang <James.Yang@freescale.com> Signed-off-by: Jon Loeliger <jdl@freescale.com> +commit f64702b7fc8f8df39d31add770df6e372f9e9ce3 +Author: Timur Tabi <timur@freescale.com> +Date: Mon Apr 30 13:59:50 2007 -0500 + + Fix memory initialization on MPC8349E-mITX + + Define CFG_DDR_SDRAM_CLK_CNTL for the MPC8349E-mITX and MPC8349E-mITX-GP. + This allows ddr->sdram_clk_cntl to be properly initialized. This is necessary + on some ITX boards, notably those with a revision 3.1 CPU. + + Also change spd_sdram() in cpu/mpc83xx/spd_sdram.c to not write anything into + ddr->sdram_clk_cntl if CFG_DDR_SDRAM_CLK_CNTL is not defined. + + Signed-off-by: Timur Tabi <timur@freescale.com> + Acked-by: Michael Benedict <MBenedict@twacs.com> + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit 54b2d434ae9d01787936f34fe1759cf3d7624ae3 +Author: Kim Phillips <kim.phillips@freescale.com> +Date: Mon Apr 30 15:26:21 2007 -0500 + + mpc83xx: replace elaborate boottime verbosity with 'clocks' command + + and fix CPU: to align with Board: display text. + + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + commit c1ab82669d9525998c34e802a12cad662723f22a Author: James Yang <James.Yang@freescale.com> Date: Fri Mar 16 13:02:53 2007 -0500 @@ -167,6 +436,18 @@ Date: Sun Apr 29 14:13:01 2007 +0200 Signed-off-by: Stefan Roese <sr@denx.de> +commit 5c5d3242935cf3543af01142627494434834cf98 +Author: Kim Phillips <kim.phillips@freescale.com> +Date: Wed Apr 25 12:34:38 2007 -0500 + + mpc83xx: minor fixups for 8313rdb introduction + +commit 144876a380f5756f57412caf74c1d6dc201dd796 +Author: Michal Simek <monstr@monstr.eu> +Date: Tue Apr 24 23:01:02 2007 +0200 + + [PATCH] MTD partition support, JFFS2 support + commit 37ed6cdd4159195bfad68d8a237f6adda8f482cb Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> Date: Tue Apr 24 14:03:45 2007 +0200 @@ -392,6 +673,71 @@ Date: Thu Dec 14 14:14:55 2006 +0800 board. Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> +commit 96b8a05432f346f36493535c85320b70ec9c7c1b +Author: Scott Wood <scottwood@freescale.com> +Date: Mon Apr 16 14:54:15 2007 -0500 + + mpc83xx: Add MPC8313ERDB support. + + Signed-off-by: Scott Wood <scottwood@freescale.com> + +commit 49ea3b6eafe606285ae4d5c378026153dde53200 +Author: Scott Wood <scottwood@freescale.com> +Date: Mon Apr 16 14:34:21 2007 -0500 + + mpc83xx: Add generic PCI setup code. + + Board code can now request the generic setup code rather than having to + copy-and-paste it for themselves. Boards should be converted to use this + once they're tested with it. + + Signed-off-by: Scott Wood <scottwood@freescale.com> + +commit 7c98e5193e93df6b9b651851d54b638a61ebb0ea +Author: Scott Wood <scottwood@freescale.com> +Date: Mon Apr 16 14:34:19 2007 -0500 + + mpc83xx: Add 831x support to speed.c. + + Signed-off-by: Scott Wood <scottwood@freescale.com> + +commit 0f253283a32d91e06844d7f87f9b33f4f4fbce8f +Author: Scott Wood <scottwood@freescale.com> +Date: Mon Apr 16 14:34:18 2007 -0500 + + mpc83xx: Add 831x support to global_data.h + + Signed-off-by: Scott Wood <scottwood@freescale.com> + +commit 95e7ef897e54591e615fc1b458b74c286fe1fb06 +Author: Scott Wood <scottwood@freescale.com> +Date: Mon Apr 16 14:34:16 2007 -0500 + + mpc83xx: Change PVR_83xx to PVR_E300C1-3, and update checkcpu(). + + Rather than misleadingly define PVR_83xx as the specific type of 83xx + being built for, the PVR of each core revision is defined. checkcpu() now + prints the core that it detects, rather than aborting if it doesn't find + what it thinks it wants. + + Signed-off-by: Scott Wood <scottwood@freescale.com> + +commit a35b0c4950d84cf9e3a9e32b916135956d1ac636 +Author: Scott Wood <scottwood@freescale.com> +Date: Mon Apr 16 14:34:15 2007 -0500 + + mpc83xx: Recognize SPR values for MPC8311 and MPC8313. + + Signed-off-by: Scott Wood <scottwood@freescale.com> + +commit d87c57b201b4572d16f1b642998faa00c9912b16 +Author: Scott Wood <scottwood@freescale.com> +Date: Mon Apr 16 14:31:55 2007 -0500 + + mpc83xx: Add register definitions for MPC831x. + + Signed-off-by: Scott Wood <scottwood@freescale.com> + commit 323bfa8f436dc3bc57187c9b1488bc3146ff1522 Author: Stefan Roese <sr@denx.de> Date: Mon Apr 23 12:00:22 2007 +0200 @@ -400,6 +746,24 @@ Date: Mon Apr 23 12:00:22 2007 +0200 Signed-off-by: Stefan Roese <sr@denx.de> +commit 32556443840f127170e4baa8bdd5b567039f6c36 +Author: Michal Simek <monstr@monstr.eu> +Date: Sat Apr 21 21:07:22 2007 +0200 + + [PATCH] SystemACE support for Microblaze + +commit 0643631aa1036cd746bf5d15f5a34bc7bc01ea4f +Author: Michal Simek <monstr@monstr.eu> +Date: Sat Apr 21 21:02:40 2007 +0200 + + 16bit read/write little endian + +commit 9d1d6a34d26c5933bc097ce73c9348f95573cdd4 +Author: Michal Simek <monstr@monstr.eu> +Date: Sat Apr 21 20:53:31 2007 +0200 + + Change ML401 parameters - Xilinx BSP + commit 2e343b9a57f32e1bd08c35c9976910333fb4e13d Author: Ed Swarthout <Ed.Swarthout@freescale.com> Date: Wed Feb 28 05:37:29 2007 -0600 @@ -882,6 +1246,18 @@ Date: Fri Apr 13 08:02:24 2007 +0200 Signed-of-by: Greg Lopp <lopp@pobox.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> +commit 6fbf261f8df294e589cfadebebe5468e3c0f29e9 +Author: Xie Xiaobo <r63061@freescale.com> +Date: Fri Mar 9 19:08:25 2007 +0800 + + Fix two bugs for MPC83xx DDR2 controller SPD Init + + There are a few bugs in the cpu/mpc83xx/spd_sdram.c + the first bug is that the picos_to_clk routine introduces a huge + rounding error in 83xx. + the second bug is that the mode register write recovery field is + tWR-1, not tWR >> 1. + commit 2ad3aba01d37b72e7c957b07e102fccd64fe6d13 Author: Jeffrey Mann <mannj@embeddedplanet.com> Date: Thu Apr 12 14:15:59 2007 +0200 @@ -132,8 +132,8 @@ LIST_8260=" \ ######################################################################### LIST_83xx=" \ - MPC832XEMDS MPC8349EMDS MPC8349ITX MPC8349ITXGP \ - MPC8360EMDS sbc8349 TQM834x \ + MPC8313ERDB MPC832XEMDS MPC8349EMDS MPC8349ITX \ + MPC8349ITXGP MPC8360EMDS sbc8349 TQM834x \ " @@ -1626,6 +1626,19 @@ r5200_config : unconfig ## MPC83xx Systems ######################################################################### +MPC8313ERDB_33_config \ +MPC8313ERDB_66_config: unconfig + @echo "" >include/config.h ; \ + if [ "$(findstring _33_,$@)" ] ; then \ + echo -n "...33M ..." ; \ + echo "#define CFG_33MHZ" >>include/config.h ; \ + fi ; \ + if [ "$(findstring _66_,$@)" ] ; then \ + echo -n "...66M..." ; \ + echo "#define CFG_66MHZ" >>include/config.h ; \ + fi ; + @$(MKCONFIG) -a MPC8313ERDB ppc mpc83xx mpc8313erdb + MPC832XEMDS_config \ MPC832XEMDS_HOST_33_config \ MPC832XEMDS_HOST_66_config \ @@ -718,6 +718,7 @@ The following options need to be configured: CFG_CMD_VFD * VFD support (TRAB) CFG_CMD_BSP * Board SPecific functions CFG_CMD_CDP * Cisco Discover Protocol support + CFG_CMD_FSL * Microblaze FSL support ----------------------------------------------- CFG_CMD_ALL all diff --git a/board/motionpro/motionpro.c b/board/motionpro/motionpro.c index d60d233..58985b8 100644 --- a/board/motionpro/motionpro.c +++ b/board/motionpro/motionpro.c @@ -29,6 +29,9 @@ #include <common.h> #include <mpc5xxx.h> +#if defined(CONFIG_OF_FLAT_TREE) +#include <ft_build.h> +#endif /* Kollmorgen DPR initialization data */ struct init_elem { @@ -170,3 +173,11 @@ int checkboard (void) puts("Board: Promess Motion-PRO board\n"); return 0; } + + +#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP) +void ft_board_setup(void *blob, bd_t *bd) +{ + ft_cpu_setup(blob, bd); +} +#endif /* defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP) */ diff --git a/board/mpc8313erdb/Makefile b/board/mpc8313erdb/Makefile new file mode 100644 index 0000000..a987e510 --- /dev/null +++ b/board/mpc8313erdb/Makefile @@ -0,0 +1,50 @@ +# +# (C) Copyright 2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS := $(BOARD).o sdram.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(AR) crv $@ $(OBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/mpc8313erdb/config.mk b/board/mpc8313erdb/config.mk new file mode 100644 index 0000000..f768264 --- /dev/null +++ b/board/mpc8313erdb/config.mk @@ -0,0 +1 @@ +TEXT_BASE = 0xFE000000 diff --git a/board/mpc8313erdb/mpc8313erdb.c b/board/mpc8313erdb/mpc8313erdb.c new file mode 100644 index 0000000..999fe9e --- /dev/null +++ b/board/mpc8313erdb/mpc8313erdb.c @@ -0,0 +1,116 @@ +/* + * Copyright (C) Freescale Semiconductor, Inc. 2006-2007 + * + * Author: Scott Wood <scottwood@freescale.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS for A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <ft_build.h> +#include <pci.h> +#include <mpc83xx.h> + +DECLARE_GLOBAL_DATA_PTR; + +int board_early_init_f(void) +{ +#ifndef CFG_8313ERDB_BROKEN_PMC + volatile immap_t *im = (immap_t *)CFG_IMMR; + + if (im->pmc.pmccr1 & PMCCR1_POWER_OFF) + gd->flags |= GD_FLG_SILENT; +#endif + + return 0; +} + +int checkboard(void) +{ + puts("Board: Freescale MPC8313ERDB\n"); + return 0; +} + +static struct pci_region pci_regions[] = { + { + bus_start: CFG_PCI1_MEM_BASE, + phys_start: CFG_PCI1_MEM_PHYS, + size: CFG_PCI1_MEM_SIZE, + flags: PCI_REGION_MEM | PCI_REGION_PREFETCH + }, + { + bus_start: CFG_PCI1_MMIO_BASE, + phys_start: CFG_PCI1_MMIO_PHYS, + size: CFG_PCI1_MMIO_SIZE, + flags: PCI_REGION_MEM + }, + { + bus_start: CFG_PCI1_IO_BASE, + phys_start: CFG_PCI1_IO_PHYS, + size: CFG_PCI1_IO_SIZE, + flags: PCI_REGION_IO + } +}; + +void pci_init_board(void) +{ + volatile immap_t *immr = (volatile immap_t *)CFG_IMMR; + volatile clk83xx_t *clk = (volatile clk83xx_t *)&immr->clk; + volatile law83xx_t *pci_law = immr->sysconf.pcilaw; + struct pci_region *reg[] = { pci_regions }; + int warmboot; + + /* Enable all 3 PCI_CLK_OUTPUTs. */ + clk->occr |= 0xe0000000; + + /* + * Configure PCI Local Access Windows + */ + pci_law[0].bar = CFG_PCI1_MEM_PHYS & LAWBAR_BAR; + pci_law[0].ar = LBLAWAR_EN | LBLAWAR_512MB; + + pci_law[1].bar = CFG_PCI1_IO_PHYS & LAWBAR_BAR; + pci_law[1].ar = LBLAWAR_EN | LBLAWAR_1MB; + + warmboot = gd->bd->bi_bootflags & BOOTFLAG_WARM; +#ifndef CFG_8313ERDB_BROKEN_PMC + warmboot |= immr->pmc.pmccr1 & PMCCR1_POWER_OFF; +#endif + + mpc83xx_pci_init(1, reg, warmboot); +} + +#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP) +void ft_board_setup(void *blob, bd_t *bd) +{ + u32 *p; + int len; + +#ifdef CONFIG_PCI + ft_pci_setup(blob, bd); +#endif + ft_cpu_setup(blob, bd); + + p = ft_get_prop(blob, "/memory/reg", &len); + if (p) { + *p++ = cpu_to_be32(bd->bi_memstart); + *p = cpu_to_be32(bd->bi_memsize); + } +} +#endif diff --git a/board/mpc8313erdb/sdram.c b/board/mpc8313erdb/sdram.c new file mode 100644 index 0000000..4b67788 --- /dev/null +++ b/board/mpc8313erdb/sdram.c @@ -0,0 +1,133 @@ +/* + * Copyright (C) Freescale Semiconductor, Inc. 2006-2007 + * + * Authors: Nick.Spence@freescale.com + * Wilson.Lo@freescale.com + * scottwood@freescale.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS for A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <mpc83xx.h> +#include <spd_sdram.h> + +#include <asm/bitops.h> +#include <asm/io.h> + +#include <asm/processor.h> + +#ifndef CFG_8313ERDB_BROKEN_PMC +static void resume_from_sleep(void) +{ + DECLARE_GLOBAL_DATA_PTR; + u32 magic = *(u32 *)0; + + typedef void (*func_t)(void); + func_t resume = *(func_t *)4; + + if (magic == 0xf5153ae5) + resume(); + + gd->flags &= ~GD_FLG_SILENT; + puts("\nResume from sleep failed: bad magic word\n"); +} +#endif + +/* Fixed sdram init -- doesn't use serial presence detect. + * + * This is useful for faster booting in configs where the RAM is unlikely + * to be changed, or for things like NAND booting where space is tight. + */ +static long fixed_sdram(void) +{ + volatile immap_t *im = (volatile immap_t *)CFG_IMMR; + u32 msize = CFG_DDR_SIZE * 1024 * 1024; + u32 msize_log2 = __ilog2(msize); + + im->sysconf.ddrlaw[0].bar = CFG_DDR_SDRAM_BASE >> 12; + im->sysconf.ddrlaw[0].ar = LBLAWAR_EN | (msize_log2 - 1); + im->sysconf.ddrcdr = CFG_DDRCDR_VALUE; + + /* + * Erratum DDR3 requires a 50ms delay after clearing DDRCDR[DDR_cfg], + * or the DDR2 controller may fail to initialize correctly. + */ + udelay(50000); + + im->ddr.csbnds[0].csbnds = (msize - 1) >> 24; + im->ddr.cs_config[0] = CFG_DDR_CONFIG; + + /* Currently we use only one CS, so disable the other bank. */ + im->ddr.cs_config[1] = 0; + + im->ddr.sdram_clk_cntl = CFG_DDR_CLK_CNTL; + im->ddr.timing_cfg_3 = CFG_DDR_TIMING_3; + im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1; + im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2; + im->ddr.timing_cfg_0 = CFG_DDR_TIMING_0; + +#ifndef CFG_8313ERDB_BROKEN_PMC + if (im->pmc.pmccr1 & PMCCR1_POWER_OFF) + im->ddr.sdram_cfg = CFG_SDRAM_CFG | SDRAM_CFG_BI; + else +#endif + im->ddr.sdram_cfg = CFG_SDRAM_CFG; + + im->ddr.sdram_cfg2 = CFG_SDRAM_CFG2; + im->ddr.sdram_mode = CFG_DDR_MODE; + im->ddr.sdram_mode2 = CFG_DDR_MODE_2; + + im->ddr.sdram_interval = CFG_DDR_INTERVAL; + sync(); + + /* enable DDR controller */ + im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN; + + return msize; +} + +long int initdram(int board_type) +{ + volatile immap_t *im = (volatile immap_t *)CFG_IMMR; + volatile lbus83xx_t *lbc = &im->lbus; + u32 msize; + + if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im) + return -1; + + puts("Initializing\n"); + + /* DDR SDRAM - Main SODIMM */ + msize = fixed_sdram(); + + /* Local Bus setup lbcr and mrtpr */ + lbc->lbcr = CFG_LBC_LBCR; + lbc->mrtpr = CFG_LBC_MRTPR; + sync(); + +#ifndef CFG_8313ERDB_BROKEN_PMC + if (im->pmc.pmccr1 & PMCCR1_POWER_OFF) + resume_from_sleep(); +#endif + + puts(" DDR RAM: "); + /* return total bus SDRAM size(bytes) -- DDR */ + return msize; +} diff --git a/board/mpc8313erdb/u-boot.lds b/board/mpc8313erdb/u-boot.lds new file mode 100644 index 0000000..937c87a --- /dev/null +++ b/board/mpc8313erdb/u-boot.lds @@ -0,0 +1,123 @@ +/* + * (C) Copyright 2006 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(powerpc) +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + cpu/mpc83xx/start.o (.text) + *(.text) + *(.fixup) + *(.got1) + . = ALIGN(16); + *(.rodata) + *(.rodata1) + *(.rodata.str1.4) + *(.eh_frame) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x0FFF) & 0xFFFFF000; + _erotext = .; + PROVIDE (erotext = .); + .reloc : + { + *(.got) + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2; + __fixup_entries = (. - _FIXUP_TABLE_) >> 2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + + . = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(4096); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(4096); + __init_end = .; + + __bss_start = .; + .bss : + { + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + } + _end = . ; + PROVIDE (end = .); +} +ENTRY(_start) diff --git a/board/mpc8349itx/mpc8349itx.c b/board/mpc8349itx/mpc8349itx.c index 2b3ded1..178b1d3 100644 --- a/board/mpc8349itx/mpc8349itx.c +++ b/board/mpc8349itx/mpc8349itx.c @@ -80,8 +80,7 @@ int fixed_sdram(void) im->ddr.sdram_interval = (0x0410 << SDRAM_INTERVAL_REFINT_SHIFT) | (0x0100 << SDRAM_INTERVAL_BSTOPRE_SHIFT); - im->ddr.sdram_clk_cntl = - DDR_SDRAM_CLK_CNTL_SS_EN | DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05; + im->ddr.sdram_clk_cntl = CFG_DDR_SDRAM_CLK_CNTL; udelay(200); diff --git a/board/xilinx/ml401/config.mk b/board/xilinx/ml401/config.mk index 807f169..c75daaf 100644 --- a/board/xilinx/ml401/config.mk +++ b/board/xilinx/ml401/config.mk @@ -25,7 +25,7 @@ # Version: Xilinx EDK 6.3 EDK_Gmm.12.3 # -TEXT_BASE = 0x12000000 +TEXT_BASE = 0x29000000 PLATFORM_CPPFLAGS += -mno-xl-soft-mul PLATFORM_CPPFLAGS += -mno-xl-soft-div diff --git a/board/xilinx/ml401/ml401.c b/board/xilinx/ml401/ml401.c index b48103f..955936d 100644 --- a/board/xilinx/ml401/ml401.c +++ b/board/xilinx/ml401/ml401.c @@ -27,6 +27,8 @@ #include <common.h> #include <config.h> +#include <asm/microblaze_intc.h> +#include <asm/asm.h> void do_reset (void) { @@ -43,7 +45,25 @@ void do_reset (void) int gpio_init (void) { #ifdef CFG_GPIO_0 - *((unsigned long *)(CFG_GPIO_0_ADDR)) = 0x0; + *((unsigned long *)(CFG_GPIO_0_ADDR)) = 0xFFFFFFFF; #endif return 0; } + +#ifdef CFG_FSL_2 +void fsl_isr2 (void *arg) { + volatile int num; + *((unsigned int *)(CFG_GPIO_0_ADDR + 0x4)) = + ++(*((unsigned int *)(CFG_GPIO_0_ADDR + 0x4))); + GET (num, 2); + NGET (num, 2); + puts("*"); +} + +void fsl_init2 (void) { + puts("fsl_init2\n"); + install_interrupt_handler (FSL_INTR_2,\ + fsl_isr2,\ + NULL); +} +#endif diff --git a/board/xilinx/ml401/xparameters.h b/board/xilinx/ml401/xparameters.h index 18d24f9..1a116ea 100644..100755 --- a/board/xilinx/ml401/xparameters.h +++ b/board/xilinx/ml401/xparameters.h @@ -21,47 +21,55 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA * - * * CAUTION: This file is automatically generated by libgen. - * Version: Xilinx EDK 6.3 EDK_Gmm.12.3 + * Version: Xilinx EDK 8.2.02 EDK_Im_Sp2.4 */ /* System Clock Frequency */ -#define XILINX_CLOCK_FREQ 66666667 +#define XILINX_CLOCK_FREQ 100000000 + +/* Microblaze is microblaze_0 */ +#define XILINX_USE_MSR_INSTR 1 +#define XILINX_FSL_NUMBER 3 -/* Interrupt controller is intc_0 */ -#define XILINX_INTC_BASEADDR 0xd1000fc0 -#define XILINX_INTC_NUM_INTR_INPUTS 12 +/* Interrupt controller is opb_intc_0 */ +#define XILINX_INTC_BASEADDR 0x41200000 +#define XILINX_INTC_NUM_INTR_INPUTS 6 -/* Timer pheriphery is opb_timer_0 */ -#define XILINX_TIMER_BASEADDR 0xa2000000 +/* Timer pheriphery is opb_timer_1 */ +#define XILINX_TIMER_BASEADDR 0x41c00000 #define XILINX_TIMER_IRQ 0 -/* Uart pheriphery is console_uart */ -#define XILINX_UART_BASEADDR 0xa0000000 +/* Uart pheriphery is RS232_Uart */ +#define XILINX_UART_BASEADDR 0x40600000 #define XILINX_UART_BAUDRATE 115200 -/* GPIO is opb_gpio_0*/ -#define XILINX_GPIO_BASEADDR 0x90000000 +/* IIC pheriphery is IIC_EEPROM */ +#define XILINX_IIC_0_BASEADDR 0x40800000 +#define XILINX_IIC_0_FREQ 100000 +#define XILINX_IIC_0_BIT 0 + +/* GPIO is LEDs_4Bit*/ +#define XILINX_GPIO_BASEADDR 0x40000000 -/* Flash Memory is opb_emc_0 */ -#define XILINX_FLASH_START 0x28000000 +/* Flash Memory is FLASH_2Mx32 */ +#define XILINX_FLASH_START 0x2c000000 #define XILINX_FLASH_SIZE 0x00800000 -/* Main Memory is plb_ddr_0 */ -#define XILINX_RAM_START 0x10000000 -#define XILINX_RAM_SIZE 0x10000000 +/* Main Memory is DDR_SDRAM_64Mx32 */ +#define XILINX_RAM_START 0x28000000 +#define XILINX_RAM_SIZE 0x04000000 -/* Sysace Controller is opb_sysace_0 */ -#define XILINX_SYSACE_BASEADDR 0xCF000000 -#define XILINX_SYSACE_HIGHADDR 0xCF0001FF +/* Sysace Controller is SysACE_CompactFlash */ +#define XILINX_SYSACE_BASEADDR 0x41800000 +#define XILINX_SYSACE_HIGHADDR 0x4180ffff #define XILINX_SYSACE_MEM_WIDTH 16 -/* Ethernet controller is opb_ethernet_0 */ +/* Ethernet controller is Ethernet_MAC */ #define XPAR_XEMAC_NUM_INSTANCES 1 #define XPAR_OPB_ETHERNET_0_DEVICE_ID 0 -#define XPAR_OPB_ETHERNET_0_BASEADDR 0x60000000 -#define XPAR_OPB_ETHERNET_0_HIGHADDR 0x60003FFF +#define XPAR_OPB_ETHERNET_0_BASEADDR 0x40c00000 +#define XPAR_OPB_ETHERNET_0_HIGHADDR 0x40c0ffff #define XPAR_OPB_ETHERNET_0_DMA_PRESENT 1 #define XPAR_OPB_ETHERNET_0_ERR_COUNT_EXIST 1 #define XPAR_OPB_ETHERNET_0_MII_EXIST 1 diff --git a/common/Makefile b/common/Makefile index 5dfd3a8..bc1f714 100644 --- a/common/Makefile +++ b/common/Makefile @@ -50,7 +50,7 @@ COBJS = main.o ACEX1K.o altera.o bedbug.o circbuf.o cmd_autoscript.o \ memsize.o miiphybb.o miiphyutil.o \ s_record.o serial.o soft_i2c.o soft_spi.o spartan2.o spartan3.o \ usb.o usb_kbd.o usb_storage.o \ - virtex2.o xilinx.o crc16.o xyzModem.o cmd_mac.o + virtex2.o xilinx.o crc16.o xyzModem.o cmd_mac.o cmd_mfsl.o SRCS := $(AOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(AOBJS) $(COBJS)) diff --git a/common/cmd_mfsl.c b/common/cmd_mfsl.c new file mode 100644 index 0000000..ffa2666 --- /dev/null +++ b/common/cmd_mfsl.c @@ -0,0 +1,417 @@ +/* + * (C) Copyright 2007 Michal Simek + * + * Michal SIMEK <monstr@monstr.eu> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * Microblaze FSL support + */ + +#include <common.h> +#include <config.h> +#include <command.h> + +#if (CONFIG_COMMANDS & CFG_CMD_MFSL) +#include <asm/asm.h> + +int do_frd (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) +{ + unsigned int fslnum; + unsigned int num; + unsigned int blocking; + + if (argc < 2) { + printf ("Usage:\n%s\n", cmdtp->usage); + return 1; + } + + fslnum = (unsigned int)simple_strtoul (argv[1], NULL, 16); + blocking = (unsigned int)simple_strtoul (argv[2], NULL, 16); + if (fslnum < 0 || fslnum >= XILINX_FSL_NUMBER) { + puts ("Bad number of FSL\n"); + printf ("Usage:\n%s\n", cmdtp->usage); + return 1; + } + + switch (fslnum) { +#if (XILINX_FSL_NUMBER > 0) + case 0: + switch (blocking) { + case 0: NGET (num, 0); + break; + case 1: NCGET (num, 0); + break; + case 2: GET (num, 0); + break; + case 3: CGET (num, 0); + break; + default: + return 2; + } + break; +#endif +#if (XILINX_FSL_NUMBER > 1) + case 1: + switch (blocking) { + case 0: NGET (num, 1); + break; + case 1: NCGET (num, 1); + break; + case 2: GET (num, 1); + break; + case 3: CGET (num, 1); + break; + default: + return 2; + } + break; +#endif +#if (XILINX_FSL_NUMBER > 2) + case 2: + switch (blocking) { + case 0: NGET (num, 2); + break; + case 1: NCGET (num, 2); + break; + case 2: GET (num, 2); + break; + case 3: CGET (num, 2); + break; + default: + return 2; + } + break; +#endif +#if (XILINX_FSL_NUMBER > 3) + case 3: + switch (blocking) { + case 0: NGET (num, 3); + break; + case 1: NCGET (num, 3); + break; + case 2: GET (num, 3); + break; + case 3: CGET (num, 3); + break; + default: + return 2; + } + break; +#endif +#if (XILINX_FSL_NUMBER > 4) + case 4: + switch (blocking) { + case 0: NGET (num, 4); + break; + case 1: NCGET (num, 4); + break; + case 2: GET (num, 4); + break; + case 3: CGET (num, 4); + break; + default: + return 2; + } + break; +#endif +#if (XILINX_FSL_NUMBER > 5) + case 5: + switch (blocking) { + case 0: NGET (num, 5); + break; + case 1: NCGET (num, 5); + break; + case 2: GET (num, 5); + break; + case 3: CGET (num, 5); + break; + default: + return 2; + } + break; +#endif +#if (XILINX_FSL_NUMBER > 6) + case 6: + switch (blocking) { + case 0: NGET (num, 6); + break; + case 1: NCGET (num, 6); + break; + case 2: GET (num, 6); + break; + case 3: CGET (num, 6); + break; + default: + return 2; + } + break; +#endif +#if (XILINX_FSL_NUMBER > 7) + case 7: + switch (blocking) { + case 0: NGET (num, 7); + break; + case 1: NCGET (num, 7); + break; + case 2: GET (num, 7); + break; + case 3: CGET (num, 7); + break; + default: + return 2; + } + break; +#endif + default: + return 1; + } + + printf ("%01x: 0x%08lx - %s %s read\n", fslnum, num, + blocking < 2 ? "non blocking" : "blocking", + ((blocking == 1) || (blocking == 3)) ? "control" : "data" ); + return 0; +} + +int do_fwr (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) +{ + unsigned int fslnum; + unsigned int num; + unsigned int blocking; + + if (argc < 3) { + printf ("Usage:\n%s\n", cmdtp->usage); + return 1; + } + + fslnum = (unsigned int)simple_strtoul (argv[1], NULL, 16); + num = (unsigned int)simple_strtoul (argv[2], NULL, 16); + blocking = (unsigned int)simple_strtoul (argv[3], NULL, 16); + if (fslnum < 0 || fslnum >= XILINX_FSL_NUMBER) { + printf ("Bad number of FSL\nUsage:\n%s\n", cmdtp->usage); + return 1; + } + + switch (fslnum) { +#if (XILINX_FSL_NUMBER > 0) + case 0: + switch (blocking) { + case 0: NPUT (num, 0); + break; + case 1: NCPUT (num, 0); + break; + case 2: PUT (num, 0); + break; + case 3: CPUT (num, 0); + break; + default: + return 2; + } + break; +#endif +#if (XILINX_FSL_NUMBER > 1) + case 1: + switch (blocking) { + case 0: NPUT (num, 1); + break; + case 1: NCPUT (num, 1); + break; + case 2: PUT (num, 1); + break; + case 3: CPUT (num, 1); + break; + default: + return 2; + } + break; +#endif +#if (XILINX_FSL_NUMBER > 2) + case 2: + switch (blocking) { + case 0: NPUT (num, 2); + break; + case 1: NCPUT (num, 2); + break; + case 2: PUT (num, 2); + break; + case 3: CPUT (num, 2); + break; + default: + return 2; + } + break; +#endif +#if (XILINX_FSL_NUMBER > 3) + case 3: + switch (blocking) { + case 0: NPUT (num, 3); + break; + case 1: NCPUT (num, 3); + break; + case 2: PUT (num, 3); + break; + case 3: CPUT (num, 3); + break; + default: + return 2; + } + break; +#endif +#if (XILINX_FSL_NUMBER > 4) + case 4: + switch (blocking) { + case 0: NPUT (num, 4); + break; + case 1: NCPUT (num, 4); + break; + case 2: PUT (num, 4); + break; + case 3: CPUT (num, 4); + break; + default: + return 2; + } + break; +#endif +#if (XILINX_FSL_NUMBER > 5) + case 5: + switch (blocking) { + case 0: NPUT (num, 5); + break; + case 1: NCPUT (num, 5); + break; + case 2: PUT (num, 5); + break; + case 3: CPUT (num, 5); + break; + default: + return 2; + } + break; +#endif +#if (XILINX_FSL_NUMBER > 6) + case 6: + switch (blocking) { + case 0: NPUT (num, 6); + break; + case 1: NCPUT (num, 6); + break; + case 2: PUT (num, 6); + break; + case 3: CPUT (num, 6); + break; + default: + return 2; + } + break; +#endif +#if (XILINX_FSL_NUMBER > 7) + case 7: + switch (blocking) { + case 0: NPUT (num, 7); + break; + case 1: NCPUT (num, 7); + break; + case 2: PUT (num, 7); + break; + case 3: CPUT (num, 7); + break; + default: + return 2; + } + break; +#endif + default: + return 1; + } + + printf ("%01x: 0x%08lx - %s %s write\n", fslnum, num, + blocking < 2 ? "non blocking" : "blocking", + ((blocking == 1) || (blocking == 3)) ? "control" : "data" ); + return 0; + +} + +int do_rspr (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) +{ + unsigned int reg = 0; + unsigned int val = 0; + + reg = (unsigned int)simple_strtoul (argv[1], NULL, 16); + val = (unsigned int)simple_strtoul (argv[2], NULL, 16); + if (argc < 1) { + printf ("Usage:\n%s\n", cmdtp->usage); + return 1; + } + switch (reg) { + case 0x1: + if (argc > 2) { + MTS (val, rmsr); + NOP; + MFS (val, rmsr); + + } else { + MFS (val, rmsr); + } + puts ("MSR"); + break; + case 0x3: + MFS (val, rear); + puts ("EAR"); + break; + case 0x5: + MFS (val, resr); + puts ("ESR"); + break; + default: + return 1; + } + printf (": 0x%08lx\n", val); + return 0; +} + +/***************************************************/ + +U_BOOT_CMD (frd, 3, 1, do_frd, + "frd - read data from FSL\n", + "- [fslnum [0|1|2|3]]\n" + " 0 - non blocking data read\n" + " 1 - non blocking control read\n" + " 2 - blocking data read\n" + " 3 - blocking control read\n"); + + +U_BOOT_CMD (fwr, 4, 1, do_fwr, + "fwr - write data to FSL\n", + "- [fslnum [0|1|2|3]]\n" + " 0 - non blocking data write\n" + " 1 - non blocking control write\n" + " 2 - blocking data write\n" + " 3 - blocking control write\n"); + +U_BOOT_CMD (rspr, 3, 1, do_rspr, + "rmsr - read/write special purpose register\n", + "- reg_num [write value] read/write special purpose register\n" + " 0 - MSR - Machine status register\n" + " 1 - EAR - Exception address register\n" + " 2 - ESR - Exception status register\n"); + +#endif /* CONFIG_MICROBLAZE & CFG_CMD_MFSL */ diff --git a/cpu/microblaze/Makefile b/cpu/microblaze/Makefile index db1afa5..9d54201 100644 --- a/cpu/microblaze/Makefile +++ b/cpu/microblaze/Makefile @@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(CPU).a START = start.o -SOBJS = dcache.o icache.o irq.o disable_int.o enable_int.o +SOBJS = irq.o COBJS = cpu.o interrupts.o cache.o exception.o timer.o SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) diff --git a/cpu/microblaze/cache.c b/cpu/microblaze/cache.c index fc388eb..4f36a84 100644..100755 --- a/cpu/microblaze/cache.c +++ b/cpu/microblaze/cache.c @@ -23,6 +23,7 @@ */ #include <common.h> +#include <asm/asm.h> #if (CONFIG_COMMANDS & CFG_CMD_CACHE) @@ -45,4 +46,20 @@ int icache_status (void) __asm__ __volatile__ ("and %0,%0,%1"::"r" (i), "r" (mask):"memory"); return i; } + +void icache_enable (void) { + MSRSET(0x20); +} + +void icache_disable(void) { + MSRCLR(0x20); +} + +void dcache_enable (void) { + MSRSET(0x80); +} + +void dcache_disable(void) { + MSRCLR(0x80); +} #endif diff --git a/cpu/microblaze/dcache.S b/cpu/microblaze/dcache.S deleted file mode 100644 index eaf9671..0000000 --- a/cpu/microblaze/dcache.S +++ /dev/null @@ -1,68 +0,0 @@ -/* - * (C) Copyright 2007 Michal Simek - * - * Michal SIMEK <monstr@monstr.eu> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - .text - .globl dcache_enable - .ent dcache_enable - .align 2 -dcache_enable: - /* Make space on stack for a temporary */ - addi r1, r1, -4 - /* Save register r12 */ - swi r12, r1, 0 - /* Read the MSR register */ - mfs r12, rmsr - /* Set the instruction enable bit */ - ori r12, r12, 0x80 - /* Save the MSR register */ - mts rmsr, r12 - /* Load register r12 */ - lwi r12, r1, 0 - /* Return */ - rtsd r15, 8 - /* Update stack in the delay slot */ - addi r1, r1, 4 - .end dcache_enable - - .text - .globl dcache_disable - .ent dcache_disable - .align 2 -dcache_disable: - /* Make space on stack for a temporary */ - addi r1, r1, -4 - /* Save register r12 */ - swi r12, r1, 0 - /* Read the MSR register */ - mfs r12, rmsr - /* Clear the data cache enable bit */ - andi r12, r12, ~0x80 - /* Save the MSR register */ - mts rmsr, r12 - /* Load register r12 */ - lwi r12, r1, 0 - /* Return */ - rtsd r15, 8 - /* Update stack in the delay slot */ - addi r1, r1, 4 - .end dcache_disable diff --git a/cpu/microblaze/disable_int.S b/cpu/microblaze/disable_int.S deleted file mode 100644 index aecd795..0000000 --- a/cpu/microblaze/disable_int.S +++ /dev/null @@ -1,46 +0,0 @@ -/* - * (C) Copyright 2007 Michal Simek - * - * Michal SIMEK <monstr@monstr.eu> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - - .text - .globl microblaze_disable_interrupts - .ent microblaze_disable_interrupts - .align 2 -microblaze_disable_interrupts: - #Make space on stack for a temporary - addi r1, r1, -4 - #Save register r12 - swi r12, r1, 0 - #Read the MSR register - mfs r12, rmsr - #Clear the interrupt enable bit - andi r12, r12, ~2 - #Save the MSR register - mts rmsr, r12 - #Load register r12 - lwi r12, r1, 0 - #Return - rtsd r15, 8 - #Update stack in the delay slot - addi r1, r1, 4 - .end microblaze_disable_interrupts diff --git a/cpu/microblaze/enable_int.S b/cpu/microblaze/enable_int.S deleted file mode 100644 index c096c6c..0000000 --- a/cpu/microblaze/enable_int.S +++ /dev/null @@ -1,38 +0,0 @@ -/* - * (C) Copyright 2007 Michal Simek - * - * Michal SIMEK <monstrmonstr.eu> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - - .text - .globl microblaze_enable_interrupts - .ent microblaze_enable_interrupts - .align 2 -microblaze_enable_interrupts: - addi r1, r1, -4 - swi r12, r1, 0 - mfs r12, rmsr - ori r12, r12, 2 - mts rmsr, r12 - lwi r12, r1, 0 - rtsd r15, 8 - addi r1, r1, 4 - .end microblaze_enable_interrupts diff --git a/cpu/microblaze/exception.c b/cpu/microblaze/exception.c index b135acb..d76b05a 100644 --- a/cpu/microblaze/exception.c +++ b/cpu/microblaze/exception.c @@ -23,15 +23,16 @@ */ #include <common.h> +#include <asm/asm.h> void _hw_exception_handler (void) { int address = 0; int state = 0; /* loading address of exception EAR */ - __asm__ __volatile ("mfs %0,rear"::"r" (address):"memory"); + MFS (address, rear); /* loading excetpion state register ESR */ - __asm__ __volatile ("mfs %0,resr"::"r" (state):"memory"); + MFS (state, resr); printf ("Hardware exception at 0x%x address\n", address); switch (state & 0x1f) { /* mask on exception cause */ case 0x1: @@ -49,6 +50,11 @@ void _hw_exception_handler (void) case 0x5: puts ("Divide by zero exception\n"); break; +#ifdef MICROBLAZE_V5 + case 0x1000: + puts ("Exception in delay slot\n"); + break; +#endif default: puts ("Undefined cause\n"); break; diff --git a/cpu/microblaze/icache.S b/cpu/microblaze/icache.S deleted file mode 100644 index 25940d1..0000000 --- a/cpu/microblaze/icache.S +++ /dev/null @@ -1,69 +0,0 @@ -/* - * (C) Copyright 2007 Michal Simek - * - * Michal SIMEK <monstr@monstr.eu> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - - .text - .globl icache_enable - .ent icache_enable - .align 2 -icache_enable: - /* Make space on stack for a temporary */ - addi r1, r1, -4 - /* Save register r12 */ - swi r12, r1, 0 - /* Read the MSR register */ - mfs r12, rmsr - /* Set the instruction enable bit */ - ori r12, r12, 0x20 - /* Save the MSR register */ - mts rmsr, r12 - /* Load register r12 */ - lwi r12, r1, 0 - /* Return */ - rtsd r15, 8 - /* Update stack in the delay slot */ - addi r1, r1, 4 - .end icache_enable - - .text - .globl icache_disable - .ent icache_disable - .align 2 -icache_disable: - /* Make space on stack for a temporary */ - addi r1, r1, -4 - /* Save register r12 */ - swi r12, r1, 0 - /* Read the MSR register */ - mfs r12, rmsr - /* Clear the instruction enable bit */ - andi r12, r12, ~0x20 - /* Save the MSR register */ - mts rmsr, r12 - /* Load register r12 */ - lwi r12, r1, 0 - /* Return */ - rtsd r15, 8 - /* Update stack in the delay slot */ - addi r1, r1, 4 - .end icache_disable diff --git a/cpu/microblaze/interrupts.c b/cpu/microblaze/interrupts.c index 2db847c..b61153f 100644..100755 --- a/cpu/microblaze/interrupts.c +++ b/cpu/microblaze/interrupts.c @@ -27,6 +27,7 @@ #include <common.h> #include <command.h> #include <asm/microblaze_intc.h> +#include <asm/asm.h> #undef DEBUG_INT @@ -35,12 +36,12 @@ extern void microblaze_enable_interrupts (void); void enable_interrupts (void) { - microblaze_enable_interrupts (); + MSRSET(0x2); } int disable_interrupts (void) { - microblaze_disable_interrupts (); + MSRCLR(0x2); return 0; } @@ -48,6 +49,10 @@ int disable_interrupts (void) #ifdef CFG_TIMER_0 extern void timer_init (void); #endif +#ifdef CFG_FSL_2 +extern void fsl_init2 (void); +#endif + static struct irq_action vecs[CFG_INTC_0_NUM]; @@ -106,7 +111,6 @@ void install_interrupt_handler (int irq, interrupt_handler_t * hdlr, void *arg) act->count = 0; enable_one_interrupt (irq); } else { /* disable */ - act->handler = (interrupt_handler_t *) def_hdlr; act->arg = (void *)irq; disable_one_interrupt (irq); @@ -141,18 +145,22 @@ int interrupts_init (void) #ifdef CFG_TIMER_0 timer_init (); #endif +#ifdef CFG_FSL_2 + fsl_init2 (); +#endif enable_interrupts (); return 0; } void interrupt_handler (void) { - int irqs; - irqs = (intc->isr & intc->ier); /* find active interrupt */ - + int irqs = (intc->isr & intc->ier); /* find active interrupt */ + int i = 1; #ifdef DEBUG_INT + int value; printf ("INTC isr %x, ier %x, iar %x, mer %x\n", intc->isr, intc->ier, intc->iar, intc->mer); + R14(value); printf ("Interrupt handler on %x line, r14 %x\n", irqs, value); #endif struct irq_action *act = vecs; @@ -165,15 +173,19 @@ void interrupt_handler (void) #endif act->handler (act->arg); act->count++; + intc->iar = i; + return; } irqs >>= 1; act++; + i <<= 1; } - intc->iar = 0xFFFFFFFF; /* erase all events */ -#ifdef DEBUG + +#ifdef DEBUG_INT printf ("Dump INTC reg, isr %x, ier %x, iar %x, mer %x\n", intc->isr, intc->ier, intc->iar, intc->mer); - printf ("Interrupt handler on %x line, r14\n", irqs); + R14(value); + printf ("Interrupt handler on %x line, r14 %x\n", irqs, value); #endif } #endif diff --git a/cpu/microblaze/irq.S b/cpu/microblaze/irq.S index a4e3fbf..e1fc190 100644..100755 --- a/cpu/microblaze/irq.S +++ b/cpu/microblaze/irq.S @@ -23,6 +23,7 @@ */ #include <config.h> +#include <asm/asm.h> .text .global _interrupt_handler _interrupt_handler: @@ -151,6 +152,11 @@ _interrupt_handler: addi r1, r1, 4 /* enable_interrupt */ +#ifdef XILINX_USE_MSR_INSTR + msrset r0, 2 +#else + /* FIXME unstable in stressed mode - two irqs */ + nop addi r1, r1, -4 swi r12, r1, 0 mfs r12, rmsr @@ -159,6 +165,7 @@ _interrupt_handler: lwi r12, r1, 0 addi r1, r1, 4 nop +#endif bra r14 nop nop diff --git a/cpu/microblaze/start.S b/cpu/microblaze/start.S index ca3befc..3c027ff 100644 --- a/cpu/microblaze/start.S +++ b/cpu/microblaze/start.S @@ -117,3 +117,36 @@ clear_bss: 3: /* jumping to board_init */ brai board_init 1: bri 1b + +/* + * Read 16bit little endian + */ + .text + .global in16 + .ent in16 + .align 2 +in16: lhu r3, r0, r5 + bslli r4, r3, 8 + bsrli r3, r3, 8 + andi r4, r4, 0xffff + or r3, r3, r4 + rtsd r15, 8 + sext16 r3, r3 + .end in16 + +/* + * Write 16bit little endian + * first parameter(r5) - address, second(r6) - short value + */ + .text + .global out16 + .ent out16 + .align 2 +out16: bslli r3, r6, 8 + bsrli r6, r6, 8 + andi r3, r3, 0xffff + or r3, r3, r6 + sh r3, r0, r5 + rtsd r15, 8 + or r0, r0, r0 + .end out16 diff --git a/cpu/microblaze/timer.c b/cpu/microblaze/timer.c index be4fd57..ab1cb12 100644 --- a/cpu/microblaze/timer.c +++ b/cpu/microblaze/timer.c @@ -24,6 +24,7 @@ #include <common.h> #include <asm/microblaze_timer.h> +#include <asm/microblaze_intc.h> volatile int timestamp = 0; @@ -44,9 +45,6 @@ void set_timer (ulong t) #ifdef CFG_INTC_0 #ifdef CFG_TIMER_0 -extern void install_interrupt_handler (int irq, interrupt_handler_t * hdlr, - void *arg); - microblaze_timer_t *tmr = (microblaze_timer_t *) (CFG_TIMER_0_ADDR); void timer_isr (void *arg) diff --git a/cpu/mpc5xxx/fec.c b/cpu/mpc5xxx/fec.c index e59bd85..00e8911 100644 --- a/cpu/mpc5xxx/fec.c +++ b/cpu/mpc5xxx/fec.c @@ -395,7 +395,9 @@ static int mpc5xxx_fec_init(struct eth_device *dev, bd_t * bis) static int mpc5xxx_fec_init_phy(struct eth_device *dev, bd_t * bis) { mpc5xxx_fec_priv *fec = (mpc5xxx_fec_priv *)dev->priv; +#ifndef CONFIG_MOTIONPRO const uint8 phyAddr = CONFIG_PHY_ADDR; /* Only one PHY */ +#endif /* !CONFIG_MOTIONPRO */ #if (DEBUG & 0x1) printf ("mpc5xxx_fec_init_phy... Begin\n"); @@ -428,6 +430,14 @@ static int mpc5xxx_fec_init_phy(struct eth_device *dev, bd_t * bis) */ fec->eth->imask = 0x00000000; +/* + * In original Promess-provided code PHY initialization is disabled with the + * following comment: "Phy initialization is DISABLED for now. There was a + * problem with running 100 Mbps on PRO board". Thus we temporarily disable + * PHY initialization for the Motion-PRO board, until a proper fix is found. + */ + +#ifndef CONFIG_MOTIONPRO if (fec->xcv_type != SEVENWIRE) { /* * Set MII_SPEED = (1/(mii_speed * 2)) * System Clock @@ -554,6 +564,7 @@ static int mpc5xxx_fec_init_phy(struct eth_device *dev, bd_t * bis) } } +#endif /* !CONFIG_MOTIONPRO */ #if (DEBUG & 0x2) if (fec->xcv_type != SEVENWIRE) diff --git a/cpu/mpc83xx/Makefile b/cpu/mpc83xx/Makefile index 4b9dcc8..bb96f77 100644 --- a/cpu/mpc83xx/Makefile +++ b/cpu/mpc83xx/Makefile @@ -29,7 +29,7 @@ LIB = $(obj)lib$(CPU).a START = start.o COBJS = traps.o cpu.o cpu_init.o speed.o interrupts.o \ - spd_sdram.o qe_io.o + spd_sdram.o qe_io.o pci.o SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) diff --git a/cpu/mpc83xx/cpu.c b/cpu/mpc83xx/cpu.c index e934ba6..e078f27 100644 --- a/cpu/mpc83xx/cpu.c +++ b/cpu/mpc83xx/cpu.c @@ -52,13 +52,26 @@ int checkcpu(void) immr = (immap_t *)CFG_IMMR; - if ((pvr & 0xFFFF0000) != PVR_83xx) { - puts("Not MPC83xx Family!!!\n"); - return -1; + puts("CPU: "); + + switch (pvr & 0xffff0000) { + case PVR_E300C1: + printf("e300c1, "); + break; + + case PVR_E300C2: + printf("e300c2, "); + break; + + case PVR_E300C3: + printf("e300c3, "); + break; + + default: + printf("Unknown core, "); } spridr = immr->sysconf.spridr; - puts("CPU: "); switch(spridr) { case SPR_8349E_REV10: case SPR_8349E_REV11: @@ -124,6 +137,18 @@ int checkcpu(void) case SPR_8321_REV11: puts("MPC8321, "); break; + case SPR_8311_REV10: + puts("MPC8311, "); + break; + case SPR_8311E_REV10: + puts("MPC8311E, "); + break; + case SPR_8313_REV10: + puts("MPC8313, "); + break; + case SPR_8313E_REV10: + puts("MPC8313E, "); + break; default: puts("Rev: Unknown revision number.\nWarning: Unsupported cpu revision!\n"); return 0; @@ -133,10 +158,12 @@ int checkcpu(void) /* Multiple revisons of 834x processors may have the same SPRIDR value. * So use PVR to identify the revision number. */ - printf("Rev: %02x at %s MHz\n", PVR_MAJ(pvr)<<4 | PVR_MIN(pvr), strmhz(buf, clock)); + printf("Rev: %02x at %s MHz", PVR_MAJ(pvr)<<4 | PVR_MIN(pvr), strmhz(buf, clock)); #else - printf("Rev: %02x at %s MHz\n", spridr & 0x0000FFFF, strmhz(buf, clock)); + printf("Rev: %02x at %s MHz", spridr & 0x0000FFFF, strmhz(buf, clock)); #endif + printf(", CSB: %4d MHz\n", gd->csb_clk / 1000000); + return 0; } diff --git a/cpu/mpc83xx/pci.c b/cpu/mpc83xx/pci.c new file mode 100644 index 0000000..785d612 --- /dev/null +++ b/cpu/mpc83xx/pci.c @@ -0,0 +1,192 @@ +/* + * Copyright (C) Freescale Semiconductor, Inc. 2007 + * + * Author: Scott Wood <scottwood@freescale.com>, + * with some bits from older board-specific PCI initialization. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <pci.h> +#include <ft_build.h> +#include <asm/mpc8349_pci.h> + +#ifdef CONFIG_83XX_GENERIC_PCI +#define MAX_BUSES 2 + +DECLARE_GLOBAL_DATA_PTR; + +static struct pci_controller pci_hose[MAX_BUSES]; +static int pci_num_buses; + +static void pci_init_bus(int bus, struct pci_region *reg) +{ + volatile immap_t *immr = (volatile immap_t *)CFG_IMMR; + volatile pot83xx_t *pot = immr->ios.pot; + volatile pcictrl83xx_t *pci_ctrl = &immr->pci_ctrl[bus]; + struct pci_controller *hose = &pci_hose[bus]; + u32 dev; + u16 reg16; + int i; + + if (bus == 1) + pot += 3; + + /* Setup outbound translation windows */ + for (i = 0; i < 3; i++, reg++, pot++) { + if (reg->size == 0) + break; + + hose->regions[i] = *reg; + hose->region_count++; + + pot->potar = reg->bus_start >> 12; + pot->pobar = reg->phys_start >> 12; + pot->pocmr = ~(reg->size - 1) >> 12; + + if (reg->flags & PCI_REGION_IO) + pot->pocmr |= POCMR_IO; +#ifdef CONFIG_83XX_PCI_STREAMING + else if (reg->flags & PCI_REGION_PREFETCH) + pot->pocmr |= POCMR_SE; +#endif + + if (bus == 1) + pot->pocmr |= POCMR_DST; + + pot->pocmr |= POCMR_EN; + } + + /* Point inbound translation at RAM */ + pci_ctrl->pitar1 = 0; + pci_ctrl->pibar1 = 0; + pci_ctrl->piebar1 = 0; + pci_ctrl->piwar1 = PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | + PIWAR_WTT_SNOOP | (__ilog2(gd->ram_size) - 1); + + i = hose->region_count++; + hose->regions[i].bus_start = 0; + hose->regions[i].phys_start = 0; + hose->regions[i].size = gd->ram_size; + hose->regions[i].flags = PCI_REGION_MEM | PCI_REGION_MEMORY; + + hose->first_busno = 0; + hose->last_busno = 0xff; + + pci_setup_indirect(hose, CFG_IMMR + 0x8300 + bus * 0x80, + CFG_IMMR + 0x8304 + bus * 0x80); + + pci_register_hose(hose); + + /* + * Write to Command register + */ + reg16 = 0xff; + dev = PCI_BDF(hose->first_busno, 0, 0); + pci_hose_read_config_word(hose, dev, PCI_COMMAND, ®16); + reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; + pci_hose_write_config_word(hose, dev, PCI_COMMAND, reg16); + + /* + * Clear non-reserved bits in status register. + */ + pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff); + pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80); + pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, 0x08); + +#ifdef CONFIG_PCI_SCAN_SHOW + printf("PCI: Bus Dev VenId DevId Class Int\n"); +#endif + /* + * Hose scan. + */ + hose->last_busno = pci_hose_scan(hose); +} + +/* + * The caller must have already set OCCR, and the PCI_LAW BARs + * must have been set to cover all of the requested regions. + * + * If fewer than three regions are requested, then the region + * list is terminated with a region of size 0. + */ +void mpc83xx_pci_init(int num_buses, struct pci_region **reg, int warmboot) +{ + volatile immap_t *immr = (volatile immap_t *)CFG_IMMR; + int i; + + if (num_buses > MAX_BUSES) { + printf("%d PCI buses requsted, %d supported\n", + num_buses, MAX_BUSES); + + num_buses = MAX_BUSES; + } + + pci_num_buses = num_buses; + + /* + * Release PCI RST Output signal. + * Power on to RST high must be at least 100 ms as per PCI spec. + * On warm boots only 1 ms is required. + */ + udelay(warmboot ? 1000 : 100000); + + for (i = 0; i < num_buses; i++) + immr->pci_ctrl[i].gcr = 1; + + /* + * RST high to first config access must be at least 2^25 cycles + * as per PCI spec. This could be cut in half if we know we're + * running at 66MHz. This could be insufficiently long if we're + * running the PCI bus at significantly less than 33MHz. + */ + udelay(1020000); + + for (i = 0; i < num_buses; i++) + pci_init_bus(i, reg[i]); +} + +#ifdef CONFIG_OF_FLAT_TREE +void ft_pci_setup(void *blob, bd_t *bd) +{ + u32 *p; + int len; + + if (pci_num_buses < 1) + return; + + p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8500/bus-range", &len); + if (p) { + p[0] = pci_hose[0].first_busno; + p[1] = pci_hose[0].last_busno; + } + + if (pci_num_buses < 2) + return; + + p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8600/bus-range", &len); + if (p) { + p[0] = pci_hose[1].first_busno; + p[1] = pci_hose[1].last_busno; + } +} +#endif /* CONFIG_OF_FLAT_TREE */ + +#endif /* CONFIG_83XX_GENERIC_PCI */ diff --git a/cpu/mpc83xx/spd_sdram.c b/cpu/mpc83xx/spd_sdram.c index d9b8753..647813f 100644 --- a/cpu/mpc83xx/spd_sdram.c +++ b/cpu/mpc83xx/spd_sdram.c @@ -58,8 +58,8 @@ picos_to_clk(int picos) int clks; ddr_bus_clk = gd->ddr_clk >> 1; - clks = picos / ((1000000000 / ddr_bus_clk) * 1000); - if (picos % ((1000000000 / ddr_bus_clk) * 1000) != 0) + clks = picos / (1000000000 / (ddr_bus_clk / 1000)); + if (picos % (1000000000 / (ddr_bus_clk / 1000)) != 0) clks++; return clks; @@ -624,7 +624,7 @@ long int spd_sdram() | (1 << (16 + 10)) /* DQS Differential disable */ | (add_lat << (16 + 3)) /* Additive Latency in EMRS1 */ | (mode_odt_enable << 16) /* ODT Enable in EMRS1 */ - | ((twr_clk >> 1) << 9) /* Write Recovery Autopre */ + | ((twr_clk - 1) << 9) /* Write Recovery Autopre */ | (caslat << 4) /* caslat */ | (burstlen << 0) /* Burst length */ ); @@ -693,11 +693,6 @@ long int spd_sdram() #ifdef CFG_DDR_SDRAM_CLK_CNTL /* Optional platform specific value */ ddr->sdram_clk_cntl = CFG_DDR_SDRAM_CLK_CNTL; -#else - /* SS_EN = 0, source synchronous disable - * CLK_ADJST = 0, MCK/MCK# is launched aligned with addr/cmd - */ - ddr->sdram_clk_cntl = 0x00000000; #endif debug("DDR:sdram_clk_cntl=0x%08x\n", ddr->sdram_clk_cntl); diff --git a/cpu/mpc83xx/speed.c b/cpu/mpc83xx/speed.c index c759930..bf30616 100644 --- a/cpu/mpc83xx/speed.c +++ b/cpu/mpc83xx/speed.c @@ -25,6 +25,7 @@ #include <common.h> #include <mpc83xx.h> +#include <command.h> #include <asm/processor.h> DECLARE_GLOBAL_DATA_PTR; @@ -99,12 +100,14 @@ int get_clocks(void) u32 lcrr; u32 csb_clk; -#if defined(CONFIG_MPC834X) +#if defined(CONFIG_MPC834X) || defined(CONFIG_MPC831X) u32 tsec1_clk; u32 tsec2_clk; - u32 usbmph_clk; u32 usbdr_clk; #endif +#ifdef CONFIG_MPC834X + u32 usbmph_clk; +#endif u32 core_clk; u32 i2c1_clk; #if !defined(CONFIG_MPC832X) @@ -148,7 +151,7 @@ int get_clocks(void) sccr = im->clk.sccr; -#if defined(CONFIG_MPC834X) +#if defined(CONFIG_MPC834X) || defined(CONFIG_MPC831X) switch ((sccr & SCCR_TSEC1CM) >> SCCR_TSEC1CM_SHIFT) { case 0: tsec1_clk = 0; @@ -167,6 +170,26 @@ int get_clocks(void) return -4; } + switch ((sccr & SCCR_USBDRCM) >> SCCR_USBDRCM_SHIFT) { + case 0: + usbdr_clk = 0; + break; + case 1: + usbdr_clk = csb_clk; + break; + case 2: + usbdr_clk = csb_clk / 2; + break; + case 3: + usbdr_clk = csb_clk / 3; + break; + default: + /* unkown SCCR_USBDRCM value */ + return -8; + } +#endif + +#if defined(CONFIG_MPC834X) switch ((sccr & SCCR_TSEC2CM) >> SCCR_TSEC2CM_SHIFT) { case 0: tsec2_clk = 0; @@ -205,24 +228,6 @@ int get_clocks(void) return -7; } - switch ((sccr & SCCR_USBDRCM) >> SCCR_USBDRCM_SHIFT) { - case 0: - usbdr_clk = 0; - break; - case 1: - usbdr_clk = csb_clk; - break; - case 2: - usbdr_clk = csb_clk / 2; - break; - case 3: - usbdr_clk = csb_clk / 3; - break; - default: - /* unkown SCCR_USBDRCM value */ - return -8; - } - if (usbmph_clk != 0 && usbdr_clk != 0 && usbmph_clk != usbdr_clk) { /* if USB MPH clock is not disabled and * USB DR clock is not disabled then @@ -230,8 +235,16 @@ int get_clocks(void) */ return -9; } +#elif defined(CONFIG_MPC831X) + tsec2_clk = tsec1_clk; + + if (!(sccr & SCCR_TSEC1ON)) + tsec1_clk = 0; + if (!(sccr & SCCR_TSEC2ON)) + tsec2_clk = 0; #endif -#if defined(CONFIG_MPC8360) || defined(CONFIG_MPC832X) + +#if !defined(CONFIG_MPC834X) i2c1_clk = csb_clk; #endif #if !defined(CONFIG_MPC832X) @@ -314,12 +327,14 @@ int get_clocks(void) #endif gd->csb_clk = csb_clk; -#if defined(CONFIG_MPC834X) +#if defined(CONFIG_MPC834X) || defined(CONFIG_MPC831X) gd->tsec1_clk = tsec1_clk; gd->tsec2_clk = tsec2_clk; - gd->usbmph_clk = usbmph_clk; gd->usbdr_clk = usbdr_clk; #endif +#if defined(CONFIG_MPC834X) + gd->usbmph_clk = usbmph_clk; +#endif gd->core_clk = core_clk; gd->i2c1_clk = i2c1_clk; #if !defined(CONFIG_MPC832X) @@ -351,11 +366,11 @@ ulong get_bus_freq(ulong dummy) return gd->csb_clk; } -int print_clock_conf(void) +int do_clocks (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) { printf("Clock configuration:\n"); - printf(" Coherent System Bus: %4d MHz\n", gd->csb_clk / 1000000); printf(" Core: %4d MHz\n", gd->core_clk / 1000000); + printf(" Coherent System Bus: %4d MHz\n", gd->csb_clk / 1000000); #if defined(CONFIG_MPC8360) || defined(CONFIG_MPC832X) printf(" QE: %4d MHz\n", gd->qe_clk / 1000000); printf(" BRG: %4d MHz\n", gd->brg_clk / 1000000); @@ -371,11 +386,18 @@ int print_clock_conf(void) #if !defined(CONFIG_MPC832X) printf(" I2C2: %4d MHz\n", gd->i2c2_clk / 1000000); #endif -#if defined(CONFIG_MPC834X) +#if defined(CONFIG_MPC834X) || defined(CONFIG_MPC831X) printf(" TSEC1: %4d MHz\n", gd->tsec1_clk / 1000000); printf(" TSEC2: %4d MHz\n", gd->tsec2_clk / 1000000); - printf(" USB MPH: %4d MHz\n", gd->usbmph_clk / 1000000); printf(" USB DR: %4d MHz\n", gd->usbdr_clk / 1000000); #endif +#if defined(CONFIG_MPC834X) + printf(" USB MPH: %4d MHz\n", gd->usbmph_clk / 1000000); +#endif return 0; } + +U_BOOT_CMD(clocks, 1, 0, do_clocks, + "clocks - print clock configuration\n", + " clocks\n" +); diff --git a/doc/README.mpc8313erdb b/doc/README.mpc8313erdb new file mode 100644 index 0000000..7ad4cc7 --- /dev/null +++ b/doc/README.mpc8313erdb @@ -0,0 +1,83 @@ +Freescale MPC8313ERDB Board +----------------------------------------- + +1. Board Switches and Jumpers + + SW3 is used to set CFG_RESET_SOURCE. + + To boot the image at 0xFE000000 in NOR flash, use these DIP + switche settings for SW3 SW4: + + +------+ +------+ + | | | **** | + | **** | | | + +------+ ON +------+ ON + 4321 4321 + (where the '*' indicates the position of the tab of the switch.) + +2. Memory Map + The memory map looks like this: + + 0x0000_0000 0x07ff_ffff DDR 128M + 0x8000_0000 0x8fff_ffff PCI MEM 256M + 0x9000_0000 0x9fff_ffff PCI_MMIO 256M + 0xe000_0000 0xe00f_ffff IMMR 1M + 0xe200_0000 0xe20f_ffff PCI IO 16M + 0xe280_0000 0xe280_7fff NAND FLASH (CS1) 32K + 0xf000_0000 0xf001_ffff VSC7385 (CS2) 128K + 0xfa00_0000 0xfa00_7fff Board Status/ 32K + LED Control (CS3) + 0xfe00_0000 0xfe7f_ffff NOR FLASH (CS0) 8M + +3. Definitions + +3.1 Explanation of NEW definitions in: + + include/configs/MPC8313ERDB.h + + CONFIG_MPC83xx MPC83xx family + CONFIG_MPC831x MPC831x specific + CONFIG_MPC8313ERDB MPC8313ERDB board specific + +4. Compilation + + Assuming you're using BASH (or similar) as your shell: + + export CROSS_COMPILE=your-cross-compiler-prefix- + make distclean + make MPC8313ERDB_33_config + (or make MPC8313ERDB_66_config, depending on the speed of + the oscillator on your board) + make + +5. Downloading and Flashing Images + +5.1 Reflash U-boot Image using U-boot + + =>run tftpflash + + You may want to try + =>tftpboot $loadaddr $uboot + first, to make sure that the TFTP load will succeed before it + goes ahead and wipes out your current firmware. And of course, + have an alternate means of programming the flash available + if the new u-boot doesn't boot. + +5.2 Downloading and Booting Linux Kernel + + Ensure that all networking-related environment variables are set + properly (including ipaddr, serverip, gatewayip (if needed), + netmask, ethaddr, eth1addr, rootpath (if using NFS root), + fdtfile, and bootfile). + + Then, do one of the following, depending on whether you + want an NFS root or a ramdisk root: + + =>run nfsboot + or + =>run ramboot + +6 Notes + + Booting from NAND flash is not yet supported. + The console baudrate for MPC8313ERDB is 115200bps. diff --git a/drivers/systemace.c b/drivers/systemace.c index 3848d9c..7d82c27 100644 --- a/drivers/systemace.c +++ b/drivers/systemace.c @@ -211,10 +211,16 @@ static unsigned long systemace_read(int dev, unsigned long start, /* Write sector count | ReadMemCardData. */ ace_writew((trans & 0xff) | 0x0300, 0x14); +/* + * For FPGA configuration via SystemACE is reset unacceptable + * CFGDONE bit in STATUSREG is not set to 1. + */ +#ifndef SYSTEMACE_CONFIG_FPGA /* Reset the configruation controller */ val = ace_readw(0x18); val |= 0x0080; ace_writew(val, 0x18); +#endif retry = trans * 16; while (retry > 0) { diff --git a/fs/jffs2/compr_zlib.c b/fs/jffs2/compr_zlib.c index 1b35585..d88d0f8 100644 --- a/fs/jffs2/compr_zlib.c +++ b/fs/jffs2/compr_zlib.c @@ -45,7 +45,7 @@ long zlib_decompress(unsigned char *data_in, unsigned char *cpage_out, __u32 srclen, __u32 destlen) { - return (decompress_block(cpage_out, data_in + 2, ldr_memcpy)); + return (decompress_block(cpage_out, data_in + 2, (void *) ldr_memcpy)); } diff --git a/include/asm-microblaze/asm.h b/include/asm-microblaze/asm.h new file mode 100755 index 0000000..f10f89c --- /dev/null +++ b/include/asm-microblaze/asm.h @@ -0,0 +1,98 @@ +/* + * (C) Copyright 2007 Michal Simek + * + * Michal SIMEK <monstr@monstr.eu> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* FSL macros */ +#define NGET(val, fslnum) \ + __asm__ __volatile__ ("nget %0, rfsl" #fslnum :"=r" (val)); + +#define GET(val, fslnum) \ + __asm__ __volatile__ ("get %0, rfsl" #fslnum :"=r" (val)); + +#define NCGET(val, fslnum) \ + __asm__ __volatile__ ("ncget %0, rfsl" #fslnum :"=r" (val)); + +#define CGET(val, fslnum) \ + __asm__ __volatile__ ("cget %0, rfsl" #fslnum :"=r" (val)); + +#define NPUT(val, fslnum) \ + __asm__ __volatile__ ("nput %0, rfsl" #fslnum ::"r" (val)); + +#define PUT(val, fslnum) \ + __asm__ __volatile__ ("put %0, rfsl" #fslnum ::"r" (val)); + +#define NCPUT(val, fslnum) \ + __asm__ __volatile__ ("ncput %0, rfsl" #fslnum ::"r" (val)); + +#define CPUT(val, fslnum) \ + __asm__ __volatile__ ("cput %0, rfsl" #fslnum ::"r" (val)); + +/* CPU dependent */ +/* machine status register */ +#define MFS(val, reg) \ + __asm__ __volatile__ ("mfs %0," #reg :"=r" (val)); + +#define MTS(val, reg) \ + __asm__ __volatile__ ("mts " #reg ", %0"::"r" (val)); + +/* get return address from interrupt */ +#define R14(val) \ + __asm__ __volatile__ ("addi %0, r14, 0":"=r" (val)); + +#define NOP __asm__ __volatile__ ("nop"); + +/* use machine status registe USE_MSR_REG */ +#ifdef XILINX_USE_MSR_INSTR +#define MSRSET(val) \ + __asm__ __volatile__ ("msrset r0," #val ); + +#define MSRCLR(val) \ + __asm__ __volatile__ ("msrclr r0," #val ); + +#else +#define MSRSET(val) \ +{ \ + register unsigned tmp; \ + __asm__ __volatile__ (" \ + mfs %0, rmsr; \ + ori %0, %0, "#val"; \ + mts rmsr, %0; \ + nop;" \ + : "=r" (tmp) \ + : "d" (val) \ + : "memory"); \ +} + +#define MSRCLR(val) \ +{ \ + register unsigned tmp; \ + __asm__ __volatile__ (" \ + mfs %0, rmsr; \ + andi %0, %0, ~"#val"; \ + mts rmsr, %0; \ + nop;" \ + : "=r" (tmp) \ + : "d" (val) \ + : "memory"); \ +} +#endif diff --git a/include/asm-microblaze/microblaze_intc.h b/include/asm-microblaze/microblaze_intc.h index 6635aea..4c385aa 100644 --- a/include/asm-microblaze/microblaze_intc.h +++ b/include/asm-microblaze/microblaze_intc.h @@ -38,3 +38,6 @@ struct irq_action { void *arg; int count; /* number of interrupt */ }; + +void install_interrupt_handler (int irq, interrupt_handler_t * hdlr, + void *arg); diff --git a/include/asm-ppc/e300.h b/include/asm-ppc/e300.h index ff9512f..d1bb159 100644 --- a/include/asm-ppc/e300.h +++ b/include/asm-ppc/e300.h @@ -6,19 +6,9 @@ #ifndef __E300_H__ #define __E300_H__ -/* - * e300 Processor Version & Revision Numbers - */ -#define PVR_83xx 0x80830000 -#define PVR_8349_REV10 (PVR_83xx | 0x0010) -#define PVR_8349_REV11 (PVR_83xx | 0x0011) -#define PVR_8360_REV10 (PVR_83xx | 0x0020) -#define PVR_8360_REV11 (PVR_83xx | 0x0020) - -#if defined(CONFIG_MPC832X) -#undef PVR_83xx -#define PVR_83xx 0x80840000 -#endif +#define PVR_E300C1 0x80830000 +#define PVR_E300C2 0x80840000 +#define PVR_E300C3 0x80850000 /* * Hardware Implementation-Dependent Register 0 (HID0) diff --git a/include/asm-ppc/global_data.h b/include/asm-ppc/global_data.h index 26bc875..cd24636 100644 --- a/include/asm-ppc/global_data.h +++ b/include/asm-ppc/global_data.h @@ -55,11 +55,13 @@ typedef struct global_data { #if defined(CONFIG_MPC83XX) /* There are other clocks in the MPC83XX */ u32 csb_clk; -#if defined (CONFIG_MPC834X) +#if defined (CONFIG_MPC834X) || defined(CONFIG_MPC831X) u32 tsec1_clk; u32 tsec2_clk; - u32 usbmph_clk; u32 usbdr_clk; +#endif +#if defined (CONFIG_MPC834X) + u32 usbmph_clk; #endif /* CONFIG_MPC834X */ u32 core_clk; u32 i2c1_clk; diff --git a/include/asm-ppc/immap_83xx.h b/include/asm-ppc/immap_83xx.h index 5e088d6..0de9338 100644 --- a/include/asm-ppc/immap_83xx.h +++ b/include/asm-ppc/immap_83xx.h @@ -206,7 +206,9 @@ typedef struct pmc83xx { u32 pmccr; /* PMC Configuration Register */ u32 pmcer; /* PMC Event Register */ u32 pmcmr; /* PMC Mask Register */ - u8 res0[0xF4]; + u32 pmccr1; /* PMC Configuration Register 1 */ + u32 pmccr2; /* PMC Configuration Register 2 */ + u8 res0[0xEC]; } pmc83xx_t; /* @@ -355,7 +357,8 @@ typedef struct lbus83xx { u8 res2[0x8]; u32 mrtpr; /* Memory Refresh Timer Prescaler Register */ u32 mdr; /* UPM Data Register */ - u8 res3[0x8]; + u8 res3[0x4]; + u32 lsor; /* Special Operation Initiation Register */ u32 lsdmr; /* SDRAM Mode Register */ u8 res4[0x8]; u32 lurt; /* UPM Refresh Timer */ @@ -369,8 +372,14 @@ typedef struct lbus83xx { u8 res6[0xC]; u32 lbcr; /* Configuration Register */ u32 lcrr; /* Clock Ratio Register */ - u8 res7[0x28]; - u8 res8[0xF00]; + u8 res7[0x8]; + u32 fmr; /* Flash Mode Register */ + u32 fir; /* Flash Instruction Register */ + u32 fcr; /* Flash Command Register */ + u32 fbar; /* Flash Block Addr Register */ + u32 fpar; /* Flash Page Addr Register */ + u32 fbcr; /* Flash Byte Count Register */ + u8 res8[0xF08]; } lbus83xx_t; /* @@ -527,7 +536,7 @@ typedef struct pcictrl83xx { * USB */ typedef struct usb83xx { - u8 fixme[0x2000]; + u8 fixme[0x1000]; } usb83xx_t; /* @@ -574,7 +583,42 @@ typedef struct immap { ios83xx_t ios; /* Sequencer */ pcictrl83xx_t pci_ctrl[2]; /* PCI Controller Control and Status Registers */ u8 res5[0x19900]; - usb83xx_t usb; + usb83xx_t usb[2]; + tsec83xx_t tsec[2]; + u8 res6[0xA000]; + security83xx_t security; + u8 res7[0xC0000]; +} immap_t; + +#elif defined(CONFIG_MPC831X) +typedef struct immap { + sysconf83xx_t sysconf; /* System configuration */ + wdt83xx_t wdt; /* Watch Dog Timer (WDT) Registers */ + rtclk83xx_t rtc; /* Real Time Clock Module Registers */ + rtclk83xx_t pit; /* Periodic Interval Timer */ + gtm83xx_t gtm[2]; /* Global Timers Module */ + ipic83xx_t ipic; /* Integrated Programmable Interrupt Controller */ + arbiter83xx_t arbiter; /* System Arbiter Registers */ + reset83xx_t reset; /* Reset Module */ + clk83xx_t clk; /* System Clock Module */ + pmc83xx_t pmc; /* Power Management Control Module */ + gpio83xx_t gpio[1]; /* General purpose I/O module */ + u8 res0[0x1300]; + ddr83xx_t ddr; /* DDR Memory Controller Memory */ + fsl_i2c_t i2c[2]; /* I2C Controllers */ + u8 res1[0x1300]; + duart83xx_t duart[2]; /* DUART */ + u8 res2[0x900]; + lbus83xx_t lbus; /* Local Bus Controller Registers */ + u8 res3[0x1000]; + spi83xx_t spi; /* Serial Peripheral Interface */ + dma83xx_t dma; /* DMA */ + pciconf83xx_t pci_conf[1]; /* PCI Software Configuration Registers */ + u8 res4[0x80]; + ios83xx_t ios; /* Sequencer */ + pcictrl83xx_t pci_ctrl[1]; /* PCI Controller Control and Status Registers */ + u8 res5[0x1aa00]; + usb83xx_t usb[1]; tsec83xx_t tsec[2]; u8 res6[0xA000]; security83xx_t security; diff --git a/include/cmd_confdefs.h b/include/cmd_confdefs.h index cf36583..b3ccdce 100644 --- a/include/cmd_confdefs.h +++ b/include/cmd_confdefs.h @@ -94,6 +94,7 @@ #define CFG_CMD_EXT2 0x1000000000000000ULL /* EXT2 Support */ #define CFG_CMD_SNTP 0x2000000000000000ULL /* SNTP support */ #define CFG_CMD_DISPLAY 0x4000000000000000ULL /* Display support */ +#define CFG_CMD_MFSL 0x8000000000000000ULL /* FSL support for Microblaze */ #define CFG_CMD_ALL 0xFFFFFFFFFFFFFFFFULL /* ALL commands */ @@ -125,6 +126,7 @@ CFG_CMD_IRQ | \ CFG_CMD_JFFS2 | \ CFG_CMD_KGDB | \ + CFG_CMD_MFSL | \ CFG_CMD_MII | \ CFG_CMD_MMC | \ CFG_CMD_NAND | \ diff --git a/include/common.h b/include/common.h index b162dbd..3c4b37b 100644 --- a/include/common.h +++ b/include/common.h @@ -402,6 +402,10 @@ void ppcDcbi(unsigned long value); void ppcSync(void); void ppcDcbz(unsigned long value); #endif +#if defined (CONFIG_MICROBLAZE) +unsigned short in16(unsigned int); +void out16(unsigned int, unsigned short value); +#endif #if defined (CONFIG_MPC83XX) void ppcDWload(unsigned int *addr, unsigned int *ret); @@ -440,8 +444,6 @@ int sdram_adjust_866 (void); int adjust_sdram_tbs_8xx (void); #if defined(CONFIG_8260) int prt_8260_clks (void); -#elif defined(CONFIG_MPC83XX) -int print_clock_conf(void); #elif defined(CONFIG_MPC5xxx) int prt_mpc5xxx_clks (void); #endif diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h new file mode 100644 index 0000000..6976313 --- /dev/null +++ b/include/configs/MPC8313ERDB.h @@ -0,0 +1,561 @@ +/* + * Copyright (C) Freescale Semiconductor, Inc. 2006. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +/* + * mpc8313epb board configuration file + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + */ +#define CONFIG_E300 1 +#define CONFIG_MPC83XX 1 +#define CONFIG_MPC831X 1 +#define CONFIG_MPC8313 1 +#define CONFIG_MPC8313ERDB 1 + +#define CONFIG_PCI +#define CONFIG_83XX_GENERIC_PCI + +#ifdef CFG_66MHZ +#define CONFIG_83XX_CLKIN 66666667 /* in Hz */ +#elif defined(CFG_33MHZ) +#define CONFIG_83XX_CLKIN 33333333 /* in Hz */ +#else +#error Unknown oscillator frequency. +#endif + +#define CONFIG_SYS_CLK_FREQ CONFIG_83XX_CLKIN + +#define CONFIG_BOARD_EARLY_INIT_F /* call board_pre_init */ + +#define CFG_IMMR 0xE0000000 + +#define CFG_MEMTEST_START 0x00001000 +#define CFG_MEMTEST_END 0x07f00000 + +/* Early revs of this board will lock up hard when attempting + * to access the PMC registers, unless a JTAG debugger is + * connected, or some resistor modifications are made. + */ +#define CFG_8313ERDB_BROKEN_PMC 1 + +#define CFG_ACR_PIPE_DEP 3 /* Arbiter pipeline depth (0-3) */ +#define CFG_ACR_RPTCNT 3 /* Arbiter repeat count (0-7) */ + +/* + * DDR Setup + */ +#define CFG_DDR_BASE 0x00000000 /* DDR is system memory*/ +#define CFG_SDRAM_BASE CFG_DDR_BASE +#define CFG_DDR_SDRAM_BASE CFG_DDR_BASE + +/* + * Manually set up DDR parameters, as this board does not + * seem to have the SPD connected to I2C. + */ +#define CFG_DDR_SIZE 128 /* MB */ +#define CFG_DDR_CONFIG ( CSCONFIG_EN | CSCONFIG_AP \ + | 0x00040000 /* TODO */ \ + | CSCONFIG_ROW_BIT_13 | CSCONFIG_COL_BIT_10 ) + /* 0x80840102 */ + +#define CFG_DDR_TIMING_3 0x00000000 +#define CFG_DDR_TIMING_0 ( ( 0 << TIMING_CFG0_RWT_SHIFT ) \ + | ( 0 << TIMING_CFG0_WRT_SHIFT ) \ + | ( 0 << TIMING_CFG0_RRT_SHIFT ) \ + | ( 0 << TIMING_CFG0_WWT_SHIFT ) \ + | ( 2 << TIMING_CFG0_ACT_PD_EXIT_SHIFT ) \ + | ( 2 << TIMING_CFG0_PRE_PD_EXIT_SHIFT ) \ + | ( 8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT ) \ + | ( 2 << TIMING_CFG0_MRS_CYC_SHIFT ) ) + /* 0x00220802 */ +#define CFG_DDR_TIMING_1 ( ( 3 << TIMING_CFG1_PRETOACT_SHIFT ) \ + | ( 9 << TIMING_CFG1_ACTTOPRE_SHIFT ) \ + | ( 3 << TIMING_CFG1_ACTTORW_SHIFT ) \ + | ( 5 << TIMING_CFG1_CASLAT_SHIFT ) \ + | (13 << TIMING_CFG1_REFREC_SHIFT ) \ + | ( 3 << TIMING_CFG1_WRREC_SHIFT ) \ + | ( 2 << TIMING_CFG1_ACTTOACT_SHIFT ) \ + | ( 2 << TIMING_CFG1_WRTORD_SHIFT ) ) + /* 0x3935d322 */ +#define CFG_DDR_TIMING_2 ( ( 0 << TIMING_CFG2_ADD_LAT_SHIFT ) \ + | (31 << TIMING_CFG2_CPO_SHIFT ) \ + | ( 2 << TIMING_CFG2_WR_LAT_DELAY_SHIFT ) \ + | ( 2 << TIMING_CFG2_RD_TO_PRE_SHIFT ) \ + | ( 2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT ) \ + | ( 3 << TIMING_CFG2_CKE_PLS_SHIFT ) \ + | (10 << TIMING_CFG2_FOUR_ACT_SHIFT) ) + /* 0x0f9048ca */ /* P9-45,may need tuning */ +#define CFG_DDR_INTERVAL ( ( 800 << SDRAM_INTERVAL_REFINT_SHIFT ) \ + | ( 100 << SDRAM_INTERVAL_BSTOPRE_SHIFT ) ) + /* 0x03200064 */ +#if defined(CONFIG_DDR_2T_TIMING) +#define CFG_SDRAM_CFG ( SDRAM_CFG_SREN \ + | 3 << SDRAM_CFG_SDRAM_TYPE_SHIFT \ + | SDRAM_CFG_2T_EN \ + | SDRAM_CFG_DBW_32 ) +#else +#define CFG_SDRAM_CFG ( SDRAM_CFG_SREN \ + | 3 << SDRAM_CFG_SDRAM_TYPE_SHIFT \ + | SDRAM_CFG_32_BE ) + /* 0x43080000 */ +#endif +#define CFG_SDRAM_CFG2 0x00401000; +/* set burst length to 8 for 32-bit data path */ +#define CFG_DDR_MODE ( ( 0x4440 << SDRAM_MODE_ESD_SHIFT ) \ + | ( 0x0232 << SDRAM_MODE_SD_SHIFT ) ) + /* 0x44400232 */ +#define CFG_DDR_MODE_2 0x8000C000; + +#define CFG_DDR_CLK_CNTL DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05 + /*0x02000000*/ +#define CFG_DDRCDR_VALUE ( DDRCDR_EN \ + | DDRCDR_PZ_NOMZ \ + | DDRCDR_NZ_NOMZ \ + | DDRCDR_M_ODR ) + +/* + * FLASH on the Local Bus + */ +#define CFG_FLASH_CFI /* use the Common Flash Interface */ +#define CFG_FLASH_CFI_DRIVER /* use the CFI driver */ +#define CFG_FLASH_BASE 0xFE000000 /* start of FLASH */ +#define CFG_FLASH_SIZE 8 /* flash size in MB */ +#define CFG_FLASH_EMPTY_INFO /* display empty sectors */ +#define CFG_FLASH_USE_BUFFER_WRITE /* buffer up multiple bytes */ + +#define CFG_BR0_PRELIM (CFG_FLASH_BASE | /* flash Base address */ \ + (2 << BR_PS_SHIFT) | /* 16 bit port size */ \ + BR_V) /* valid */ +#define CFG_OR0_PRELIM ( 0xFF000000 /* 16 MByte */ \ + | OR_GPCM_XACS \ + | OR_GPCM_SCY_9 \ + | OR_GPCM_EHTR \ + | OR_GPCM_EAD ) + /* 0xFF006FF7 TODO SLOW 16 MB flash size */ +#define CFG_LBLAWBAR0_PRELIM CFG_FLASH_BASE /* window base at flash base */ +#define CFG_LBLAWAR0_PRELIM 0x80000017 /* 16 MB window size */ + +#define CFG_MAX_FLASH_BANKS 1 /* number of banks */ +#define CFG_MAX_FLASH_SECT 135 /* sectors per device */ + +#define CFG_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ +#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ + +#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */ + +#if (CFG_MONITOR_BASE < CFG_FLASH_BASE) +#define CFG_RAMBOOT +#endif + +#define CFG_INIT_RAM_LOCK 1 +#define CFG_INIT_RAM_ADDR 0xFD000000 /* Initial RAM address */ +#define CFG_INIT_RAM_END 0x1000 /* End of used area in RAM*/ + +#define CFG_GBL_DATA_SIZE 0x100 /* num bytes initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ +#define CFG_MALLOC_LEN (512 * 1024) /* Reserved for malloc */ + +/* + * Local Bus LCRR and LBCR regs + */ +#define CFG_LCRR LCRR_EADC_1 | LCRR_CLKDIV_2 /* 0x00010002 */ +#define CFG_LBC_LBCR ( 0x00040000 /* TODO */ \ + | (0xFF << LBCR_BMT_SHIFT) \ + | 0xF ) /* 0x0004ff0f */ + +#define CFG_LBC_MRTPR 0x20000000 /*TODO */ /* LB refresh timer prescal, 266MHz/32 */ + +/* drivers/nand/nand.c */ +#define CFG_NAND_BASE 0xE2800000 /* 0xF0000000 */ +#define CFG_MAX_NAND_DEVICE 1 +#define NAND_MAX_CHIPS 1 +#define CONFIG_MTD_NAND_VERIFY_WRITE + +#define CFG_BR1_PRELIM ( CFG_NAND_BASE \ + | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ + | BR_PS_8 /* Port Size = 8 bit */ \ + | BR_MS_FCM /* MSEL = FCM */ \ + | BR_V ) /* valid */ +#define CFG_OR1_PRELIM ( 0xFFFF8000 /* length 32K */ \ + | OR_FCM_CSCT \ + | OR_FCM_CST \ + | OR_FCM_CHT \ + | OR_FCM_SCY_1 \ + | OR_FCM_TRLX \ + | OR_FCM_EHTR ) + /* 0xFFFF8396 */ +#define CFG_LBLAWBAR1_PRELIM CFG_NAND_BASE +#define CFG_LBLAWAR1_PRELIM 0x8000000E /* 32KB */ + +#define CFG_VSC7385_BASE 0xF0000000 + +#define CONFIG_VSC7385_ENET /* VSC7385 ethernet support */ +#define CFG_BR2_PRELIM 0xf0000801 /* VSC7385 Base address */ +#define CFG_OR2_PRELIM 0xfffe09ff /* VSC7385, 128K bytes*/ +#define CFG_LBLAWBAR2_PRELIM CFG_VSC7385_BASE/* Access window base at VSC7385 base */ +#define CFG_LBLAWAR2_PRELIM 0x80000010 /* Access window size 128K */ + +/* local bus read write buffer mapping */ +#define CFG_BR3_PRELIM 0xFA000801 /* map at 0xFA000000 */ +#define CFG_OR3_PRELIM 0xFFFF8FF7 /* 32kB */ +#define CFG_LBLAWBAR3_PRELIM 0xFA000000 +#define CFG_LBLAWAR3_PRELIM 0x8000000E /* 32KB */ + +/* pass open firmware flat tree */ +#define CONFIG_OF_FLAT_TREE 1 +#define CONFIG_OF_BOARD_SETUP 1 + +/* maximum size of the flat tree (8K) */ +#define OF_FLAT_TREE_MAX_SIZE 8192 + +#define OF_CPU "PowerPC,8313@0" +#define OF_SOC "soc8313@e0000000" +#define OF_TBCLK (bd->bi_busfreq / 4) +#define OF_STDOUT_PATH "/soc8313@e0000000/serial@4500" + +/* + * Serial Port + */ +#define CONFIG_CONS_INDEX 1 +#define CFG_NS16550 +#define CFG_NS16550_SERIAL +#define CFG_NS16550_REG_SIZE 1 +#define CFG_NS16550_CLK get_bus_freq(0) + +#define CFG_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200} + +#define CFG_NS16550_COM1 (CFG_IMMR+0x4500) +#define CFG_NS16550_COM2 (CFG_IMMR+0x4600) + +/* Use the HUSH parser */ +#define CFG_HUSH_PARSER +#define CFG_PROMPT_HUSH_PS2 "> " + +/* I2C */ +#define CONFIG_HARD_I2C /* I2C with hardware support*/ +#define CONFIG_FSL_I2C +#define CONFIG_I2C_MULTI_BUS +#define CONFIG_I2C_CMD_TREE +#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ +#define CFG_I2C_SLAVE 0x7F +#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */ +#define CFG_I2C_OFFSET 0x3000 +#define CFG_I2C2_OFFSET 0x3100 + +/* TSEC */ +#define CFG_TSEC1_OFFSET 0x24000 +#define CFG_TSEC1 (CFG_IMMR+CFG_TSEC1_OFFSET) +#define CFG_TSEC2_OFFSET 0x25000 +#define CFG_TSEC2 (CFG_IMMR+CFG_TSEC2_OFFSET) +#define CONFIG_NET_MULTI + +/* + * General PCI + * Addresses are mapped 1-1. + */ +#define CFG_PCI1_MEM_BASE 0x80000000 +#define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE +#define CFG_PCI1_MEM_SIZE 0x10000000 /* 256M */ +#define CFG_PCI1_MMIO_BASE 0x90000000 +#define CFG_PCI1_MMIO_PHYS CFG_PCI1_MMIO_BASE +#define CFG_PCI1_MMIO_SIZE 0x10000000 /* 256M */ +#define CFG_PCI1_IO_BASE 0x00000000 +#define CFG_PCI1_IO_PHYS 0xE2000000 +#define CFG_PCI1_IO_SIZE 0x00100000 /* 1M */ + +#define CONFIG_PCI_PNP /* do pci plug-and-play */ +#define CFG_PCI_SUBSYS_VENDORID 0x1057 /* Motorola */ + +/* + * TSEC configuration + */ +#define CONFIG_TSEC_ENET /* TSEC ethernet support */ + +#ifndef CONFIG_NET_MULTI +#define CONFIG_NET_MULTI 1 +#endif + +#define CONFIG_GMII 1 /* MII PHY management */ +#define CONFIG_MPC83XX_TSEC1 1 + +#define CONFIG_MPC83XX_TSEC1_NAME "TSEC0" +#define CONFIG_MPC83XX_TSEC2 1 +#define CONFIG_MPC83XX_TSEC2_NAME "TSEC1" +#define TSEC1_PHY_ADDR 0x1c +#define TSEC2_PHY_ADDR 4 +#define TSEC1_PHYIDX 0 +#define TSEC2_PHYIDX 0 + +/* Options are: TSEC[0-1] */ +#define CONFIG_ETHPRIME "TSEC1" + +/* + * Configure on-board RTC + */ +#define CONFIG_RTC_DS1337 +#define CFG_I2C_RTC_ADDR 0x68 + +/* + * Environment + */ +#ifndef CFG_RAMBOOT + #define CFG_ENV_IS_IN_FLASH 1 + #define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000) + #define CFG_ENV_SECT_SIZE 0x10000 /* 64K(one sector) for env */ + #define CFG_ENV_SIZE 0x2000 + +/* Address and size of Redundant Environment Sector */ +#else + #define CFG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */ + #define CFG_ENV_ADDR (CFG_MONITOR_BASE - 0x1000) + #define CFG_ENV_SIZE 0x2000 +#endif + +#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ +#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ + +#define CFG_BASE_COMMANDS ( CONFIG_CMD_DFL \ + | CFG_CMD_PING \ + | CFG_CMD_DHCP \ + | CFG_CMD_I2C \ + | CFG_CMD_MII \ + | CFG_CMD_DATE \ + | CFG_CMD_PCI) + +#define CONFIG_CMDLINE_EDITING 1 + +#define CFG_RAMBOOT_COMMANDS (CFG_BASE_COMMANDS & \ + ~(CFG_CMD_ENV | CFG_CMD_LOADS)) + +#if defined(CFG_RAMBOOT) +#define CONFIG_COMMANDS CFG_RAMBOOT_COMMANDS +#else +#define CONFIG_COMMANDS CFG_BASE_COMMANDS +#endif + +#include <cmd_confdefs.h> + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_LOAD_ADDR 0x2000000 /* default load address */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ + +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_HZ 1000 /* decrementer freq: 1ms ticks */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/ + +/* Cache Configuration */ +#define CFG_DCACHE_SIZE 16384 +#define CFG_CACHELINE_SIZE 32 +#define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value*/ + +#define CFG_RCWH_PCIHOST 0x80000000 /* PCIHOST */ + +#ifdef CFG_66MHZ + +/* 66MHz IN, 133MHz CSB, 266 DDR, 266 CORE */ +/* 0x62040000 */ +#define CFG_HRCW_LOW (\ + 0x20000000 /* reserved, must be set */ |\ + HRCWL_DDRCM |\ + HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ + HRCWL_DDR_TO_SCB_CLK_2X1 |\ + HRCWL_CSB_TO_CLKIN_2X1 |\ + HRCWL_CORE_TO_CSB_2X1) + +#elif defined(CFG_33MHZ) + +/* 33MHz IN, 165MHz CSB, 330 DDR, 330 CORE */ +/* 0x65040000 */ +#define CFG_HRCW_LOW (\ + 0x20000000 /* reserved, must be set */ |\ + HRCWL_DDRCM |\ + HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ + HRCWL_DDR_TO_SCB_CLK_2X1 |\ + HRCWL_CSB_TO_CLKIN_5X1 |\ + HRCWL_CORE_TO_CSB_2X1) + +#endif + +/* 0xa0606c00 */ +#define CFG_HRCW_HIGH (\ + HRCWH_PCI_HOST |\ + HRCWH_PCI1_ARBITER_ENABLE |\ + HRCWH_CORE_ENABLE |\ + HRCWH_FROM_0X00000100 |\ + HRCWH_BOOTSEQ_DISABLE |\ + HRCWH_SW_WATCHDOG_DISABLE |\ + HRCWH_ROM_LOC_LOCAL_16BIT |\ + HRCWH_RL_EXT_LEGACY |\ + HRCWH_TSEC1M_IN_RGMII |\ + HRCWH_TSEC2M_IN_RGMII |\ + HRCWH_BIG_ENDIAN |\ + HRCWH_LALE_NORMAL) + +/* System IO Config */ +#define CFG_SICRH (SICRH_TSOBI1 | SICRH_TSOBI2) /* RGMII */ +#define CFG_SICRL SICRL_USBDR /* Enable Internal USB Phy */ + +#define CFG_HID0_INIT 0x000000000 +#define CFG_HID0_FINAL (HID0_ENABLE_MACHINE_CHECK | \ + HID0_ENABLE_DYNAMIC_POWER_MANAGMENT) + +#define CFG_HID2 HID2_HBE + +/* DDR @ 0x00000000 */ +#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10) +#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) + +/* PCI @ 0x80000000 */ +#define CFG_IBAT1L (CFG_PCI1_MEM_BASE | BATL_PP_10) +#define CFG_IBAT1U (CFG_PCI1_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) +#define CFG_IBAT2L (CFG_PCI1_MMIO_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_IBAT2U (CFG_PCI1_MMIO_BASE | BATU_BL_256M | BATU_VS | BATU_VP) + +/* PCI2 not supported on 8313 */ +#define CFG_IBAT3L (0) +#define CFG_IBAT3U (0) +#define CFG_IBAT4L (0) +#define CFG_IBAT4U (0) + +/* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 & BCSR @ 0xE2400000 */ +#define CFG_IBAT5L (CFG_IMMR | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_IBAT5U (CFG_IMMR | BATU_BL_256M | BATU_VS | BATU_VP) + +/* SDRAM @ 0xF0000000, stack in DCACHE 0xFDF00000 & FLASH @ 0xFE000000 */ +#define CFG_IBAT6L (0xF0000000 | BATL_PP_10) +#define CFG_IBAT6U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP) + +#define CFG_IBAT7L (0) +#define CFG_IBAT7U (0) + +#define CFG_DBAT0L CFG_IBAT0L +#define CFG_DBAT0U CFG_IBAT0U +#define CFG_DBAT1L CFG_IBAT1L +#define CFG_DBAT1U CFG_IBAT1U +#define CFG_DBAT2L CFG_IBAT2L +#define CFG_DBAT2U CFG_IBAT2U +#define CFG_DBAT3L CFG_IBAT3L +#define CFG_DBAT3U CFG_IBAT3U +#define CFG_DBAT4L CFG_IBAT4L +#define CFG_DBAT4U CFG_IBAT4U +#define CFG_DBAT5L CFG_IBAT5L +#define CFG_DBAT5U CFG_IBAT5U +#define CFG_DBAT6L CFG_IBAT6L +#define CFG_DBAT6U CFG_IBAT6U +#define CFG_DBAT7L CFG_IBAT7L +#define CFG_DBAT7U CFG_IBAT7U + +/* + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +/* + * Environment Configuration + */ +#define CONFIG_ENV_OVERWRITE + +#define CONFIG_ETHADDR 00:E0:0C:00:95:01 +#define CONFIG_HAS_ETH1 +#define CONFIG_ETH1ADDR 00:E0:0C:00:95:02 + +#define CONFIG_IPADDR 10.0.0.2 +#define CONFIG_SERVERIP 10.0.0.1 +#define CONFIG_GATEWAYIP 10.0.0.1 +#define CONFIG_NETMASK 255.0.0.0 +#define CONFIG_NETDEV eth1 + +#define CONFIG_HOSTNAME mpc8313erdb +#define CONFIG_ROOTPATH /nfs/root/path +#define CONFIG_BOOTFILE uImage +#define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */ +#define CONFIG_FDTFILE mpc8313erdb.dtb + +#define CONFIG_LOADADDR 200000 /* default location for tftp and bootm */ +#define CONFIG_BOOTDELAY -1 /* -1 disables auto-boot */ +#define CONFIG_BAUDRATE 115200 + +#define XMK_STR(x) #x +#define MK_STR(x) XMK_STR(x) + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=" MK_STR(CONFIG_NETDEV) "\0" \ + "ethprime=TSEC1\0" \ + "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \ + "tftpflash=tftpboot $loadaddr $uboot; " \ + "protect off " MK_STR(TEXT_BASE) " +$filesize; " \ + "erase " MK_STR(TEXT_BASE) " +$filesize; " \ + "cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; " \ + "protect on " MK_STR(TEXT_BASE) " +$filesize; " \ + "cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0" \ + "fdtaddr=400000\0" \ + "fdtfile=" MK_STR(CONFIG_FDTFILE) "\0" \ + "console=ttyS0\0" \ + "setbootargs=setenv bootargs " \ + "root=$rootdev rw console=$console,$baudrate $othbootargs\0" \ + "setipargs=setenv bootargs nfsroot=$serverip:$rootpath " \ + "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ + "root=$rootdev rw console=$console,$baudrate $othbootargs\0" + +#define CONFIG_NFSBOOTCOMMAND \ + "setenv rootdev /dev/nfs;" \ + "run setbootargs;" \ + "run setipargs;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr - $fdtaddr" + +#define CONFIG_RAMBOOTCOMMAND \ + "setenv rootdev /dev/ram;" \ + "run setbootargs;" \ + "tftp $ramdiskaddr $ramdiskfile;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr $ramdiskaddr $fdtaddr" + +#undef MK_STR +#undef XMK_STR + +#endif /* __CONFIG_H */ diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h index 37bbfb3..906339e 100644 --- a/include/configs/MPC8349ITX.h +++ b/include/configs/MPC8349ITX.h @@ -154,6 +154,9 @@ #define CFG_MEMTEST_START 0x1000 /* memtest region */ #define CFG_MEMTEST_END 0x2000 +#define CFG_DDR_SDRAM_CLK_CNTL (DDR_SDRAM_CLK_CNTL_SS_EN | \ + DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05) + #ifdef CONFIG_HARD_I2C #define CONFIG_SPD_EEPROM /* use SPD EEPROM for DDR setup*/ #endif diff --git a/include/configs/ml401.h b/include/configs/ml401.h index cb159e7..3db2877 100644 --- a/include/configs/ml401.h +++ b/include/configs/ml401.h @@ -28,6 +28,7 @@ #include "../board/xilinx/ml401/xparameters.h" #define CONFIG_MICROBLAZE 1 /* MicroBlaze CPU */ +#define MICROBLAZE_V5 1 #define CONFIG_ML401 1 /* ML401 Board */ /* uart */ @@ -36,11 +37,11 @@ #define CFG_BAUDRATE_TABLE { CONFIG_BAUDRATE } /* setting reset address */ -#define CFG_RESET_ADDRESS TEXT_BASE +/*#define CFG_RESET_ADDRESS TEXT_BASE*/ /* ethernet */ #define CONFIG_EMACLITE 1 -#define XPAR_EMAC_0_DEVICE_ID XPAR_XEMAC_NUM_INSTANCES +#define XPAR_EMAC_0_DEVICE_ID XPAR_OPB_ETHERNET_0_DEVICE_ID /* gpio */ #define CFG_GPIO_0 1 @@ -58,6 +59,10 @@ #define FREQUENCE XILINX_CLOCK_FREQ #define CFG_TIMER_0_PRELOAD ( FREQUENCE/1000 ) +/* FSL */ +#define CFG_FSL_2 +#define FSL_INTR_2 1 + /* * memory layout - Example * TEXT_BASE = 0x1200_0000; @@ -93,7 +98,8 @@ /* global pointer */ #define CFG_GBL_DATA_SIZE 0x1000 /* size of global data */ -#define CFG_GBL_DATA_OFFSET (CFG_SDRAM_BASE + CFG_SDRAM_SIZE - CFG_GBL_DATA_SIZE) /* start of global data */ +/* start of global data */ +#define CFG_GBL_DATA_OFFSET (CFG_SDRAM_BASE + CFG_SDRAM_SIZE - CFG_GBL_DATA_SIZE) /* monitor code */ #define SIZE 0x40000 @@ -117,6 +123,7 @@ #define CFG_FLASH_EMPTY_INFO 1 /* ?empty sector */ #define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ #define CFG_MAX_FLASH_SECT 128 /* max number of sectors on one chip */ + #define CFG_FLASH_PROTECTION /* hardware flash protection */ #ifdef RAMENV #define CFG_ENV_IS_NOWHERE 1 @@ -135,6 +142,7 @@ #define CFG_ENV_IS_NOWHERE 1 #define CFG_ENV_SIZE 0x1000 #define CFG_ENV_ADDR (CFG_MONITOR_BASE - CFG_ENV_SIZE) + #define CFG_FLASH_PROTECTION /* hardware flash protection */ #endif /* !FLASH */ #ifdef FLASH @@ -152,8 +160,13 @@ CFG_CMD_IMI |\ CFG_CMD_NET |\ CFG_CMD_CACHE |\ + CFG_CMD_FAT |\ + CFG_CMD_EXT2 |\ + CFG_CMD_JFFS2 |\ + CFG_CMD_ECHO |\ CFG_CMD_IMLS |\ CFG_CMD_FLASH |\ + CFG_CMD_MFSL |\ CFG_CMD_PING \ ) #else /* !RAMENV */ @@ -174,6 +187,11 @@ CFG_CMD_FLASH |\ CFG_CMD_PING |\ CFG_CMD_ENV |\ + CFG_CMD_FAT |\ + CFG_CMD_EXT2 |\ + CFG_CMD_JFFS2 |\ + CFG_CMD_ECHO |\ + CFG_CMD_MFSL |\ CFG_CMD_SAVES \ ) @@ -189,16 +207,30 @@ CFG_CMD_BDI |\ CFG_CMD_RUN |\ CFG_CMD_LOADS |\ + CFG_CMD_FAT |\ + CFG_CMD_EXT2 |\ CFG_CMD_LOADB |\ CFG_CMD_IMI |\ CFG_CMD_NET |\ CFG_CMD_CACHE |\ + CFG_CMD_MFSL |\ CFG_CMD_PING \ ) #endif /* !FLASH */ /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include <cmd_confdefs.h> +#if (CONFIG_COMMANDS & CFG_CMD_JFFS2) +/* JFFS2 partitions */ +#define CONFIG_JFFS2_CMDLINE /* mtdparts command line support */ +#define MTDIDS_DEFAULT "nor0=ml401-0" + +/* default mtd partition table */ +#define MTDPARTS_DEFAULT "mtdparts=ml401-0:256k(u-boot),"\ + "256k(env),3m(kernel),1m(romfs),"\ + "1m(cramfs),-(jffs2)" +#endif + /* Miscellaneous configurable options */ #define CFG_PROMPT "U-Boot-mONStR> " #define CFG_CBSIZE 512 /* size of console buffer */ @@ -207,7 +239,7 @@ #define CFG_LONGHELP #define CFG_LOAD_ADDR 0x12000000 /* default load address */ -#define CONFIG_BOOTDELAY 30 +#define CONFIG_BOOTDELAY 30 #define CONFIG_BOOTARGS "root=romfs" #define CONFIG_HOSTNAME "ml401" #define CONFIG_BOOTCOMMAND "base 0;tftp 11000000 image.img;bootm" @@ -221,10 +253,19 @@ #define CFG_HZ 1000 /* system ace */ -/*#define CONFIG_SYSTEMACE -#define DEBUG_SYSTEMACE -#define CFG_SYSTEMACE_BASE XILINX_SYSACE_BASEADDR -#define CFG_SYSTEMACE_WIDTH XILINX_SYSACE_MEM_WIDTH -#define CONFIG_DOS_PARTITION -*/ +#define CONFIG_SYSTEMACE +/* #define DEBUG_SYSTEMACE */ +#define SYSTEMACE_CONFIG_FPGA +#define CFG_SYSTEMACE_BASE XILINX_SYSACE_BASEADDR +#define CFG_SYSTEMACE_WIDTH XILINX_SYSACE_MEM_WIDTH +#define CONFIG_DOS_PARTITION + +#define CONFIG_PREBOOT "echo U-BOOT for ML401;setenv preboot;echo" + +#define CONFIG_EXTRA_ENV_SETTINGS "unlock=yes\0" /* hardware flash protection */\ + "nor0=ml401-0\0"\ + "mtdparts=mtdparts=ml401-0:"\ + "256k(u-boot),256k(env),3m(kernel),"\ + "1m(romfs),1m(cramfs),-(jffs2)\0" + #endif /* __CONFIG_H */ diff --git a/include/configs/motionpro.h b/include/configs/motionpro.h index 5328e8d..e6e0eb1 100644 --- a/include/configs/motionpro.h +++ b/include/configs/motionpro.h @@ -26,12 +26,10 @@ #ifndef __CONFIG_H #define __CONFIG_H - /* * High Level Configuration Options */ - /* CPU and board */ #define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ #define CONFIG_MPC5200 1 /* More exactly a MPC5200 */ @@ -50,7 +48,13 @@ CFG_CMD_MII | \ CFG_CMD_BEDBUG | \ CFG_CMD_NET | \ - CFG_CMD_PING) + CFG_CMD_PING | \ + CFG_CMD_IDE | \ + CFG_CMD_FAT | \ + CFG_CMD_JFFS2 | \ + CFG_CMD_I2C | \ + CFG_CMD_DATE | \ + CFG_CMD_EEPROM) /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include <cmd_confdefs.h> @@ -94,42 +98,50 @@ * Default environment settings */ #define CONFIG_EXTRA_ENV_SETTINGS \ - "sdram_test=0\0" \ "netdev=eth0\0" \ "hostname=motionpro\0" \ "netmask=255.255.0.0\0" \ "ipaddr=192.168.160.22\0" \ "serverip=192.168.1.1\0" \ "gatewayip=192.168.1.1\0" \ - "kernel_addr=200000\0" \ + "console=ttyPSC0,115200\0" \ "u-boot_addr=100000\0" \ - "kernel_sector=20\0" \ - "kernel_size=1000\0" \ - "console=ttyS0,115200\0" \ + "kernel_addr=200000\0" \ + "fdt_addr=400000\0" \ + "ramdisk_addr=500000\0" \ + "multi_image_addr=800000\0" \ "rootpath=/opt/eldk-4.1/ppc_6xx\0" \ - "bootfile=/tftpboot/motionpro/uImage\0" \ "u-boot=/tftpboot/motionpro/u-boot.bin\0" \ + "bootfile=/tftpboot/motionpro/uImage\0" \ + "fdt_file=/tftpboot/motionpro/motionpro.dtb\0" \ + "ramdisk_file=/tftpboot/motionpro/uRamdisk\0" \ + "multi_image_file=kernel+initrd+dtb.img\0" \ "load=tftp $(u-boot_addr) $(u-boot)\0" \ "update=prot off fff00000 fff3ffff; era fff00000 fff3ffff; " \ "cp.b $(u-boot_addr) fff00000 $(filesize);" \ "prot on fff00000 fff3ffff\0" \ "ramargs=setenv bootargs root=/dev/ram rw\0" \ - "addip=setenv bootargs $(bootargs) console=$(console) " \ - "ip=$(ipaddr):$(serverip):$(gatewayip):" \ - "$(netmask):$(hostname):$(netdev):off panic=1\0" \ - "flash_nfs=run nfsargs addip;bootm $(kernel_addr)\0" \ - "flash_self=run ramargs addip;bootm $(kernel_addr) " \ - "$(ramdisk_addr)\0" \ - "net_nfs=tftp $(kernel_addr) $(bootfile); run nfsargs addip; " \ - "bootm $(kernel_addr)\0" \ "nfsargs=setenv bootargs root=/dev/nfs rw " \ "nfsroot=$(serverip):$(rootpath)\0" \ - "fstype=ext3\0" \ - "fatargs=setenv bootargs init=/linuxrc rw\0" \ + "fat_args=setenv bootargs rw\0" \ + "addip=setenv bootargs $(bootargs) " \ + "ip=$(ipaddr):$(serverip):$(gatewayip):" \ + "$(netmask):$(hostname):$(netdev):off panic=1 " \ + "console=$(console)\0" \ + "net_nfs=tftp $(kernel_addr) $(bootfile); " \ + "tftp $(fdt_addr) $(fdt_file); run nfsargs addip; " \ + "bootm $(kernel_addr) - $(fdt_addr)\0" \ + "net_self=tftp $(kernel_addr) $(bootfile); " \ + "tftp $(fdt_addr) $(fdt_file); " \ + "tftp $(ramdisk_addr) $(ramdisk_file); " \ + "run ramargs addip; " \ + "bootm $(kernel_addr) $(ramdisk_addr) $(fdt_addr)\0" \ + "fat_multi=run fat_args addip; fatload ide 0:1 " \ + "${multi_image_addr} ${multi_image_file}; " \ + "bootm ${multi_image_addr}\0" \ "" #define CONFIG_BOOTCOMMAND "run net_nfs" - /* * do board-specific init */ @@ -148,6 +160,12 @@ /* + * Set IPB speed to 100MHz (yes, the #define is misnamed) + */ +#define CFG_IPBSPEED_133 + + +/* * Memory map */ /* @@ -243,6 +261,53 @@ #define CFG_MAX_FLASH_SECT 256 /* max num of sects on one chip */ #define CONFIG_FLASH_16BIT /* Flash is 16-bit */ +/* + * MTD configuration + */ +#define CONFIG_JFFS2_CMDLINE +#define MTDIDS_DEFAULT "nor0=motionpro-0" +#define MTDPARTS_DEFAULT "mtdparts=motionpro-0:" \ + "13m(fs),2m(kernel),256k(uboot)," \ + "64k(env),64k(dtb),-(user_data)" + +/* + * IDE/ATA configuration + */ +#define CFG_ATA_BASE_ADDR MPC5XXX_ATA +#define CFG_IDE_MAXBUS 1 +#define CFG_IDE_MAXDEVICE 1 +#define CONFIG_IDE_PREINIT + +#define CFG_ATA_DATA_OFFSET 0x0060 +#define CFG_ATA_REG_OFFSET CFG_ATA_DATA_OFFSET +#define CFG_ATA_STRIDE 4 +#define CONFIG_DOS_PARTITION + + +/* + * I2C configuration + */ +#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ +#define CFG_I2C_MODULE 2 /* select I2C module #2 */ +#define CFG_I2C_SPEED 100000 /* 100 kHz */ +#define CFG_I2C_SLAVE 0x7F + + +/* + * EEPROM configuration + */ +#define CFG_I2C_EEPROM_ADDR_LEN 1 +#define CFG_EEPROM_PAGE_WRITE_BITS 3 +#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 70 +#define CFG_I2C_MULTI_EEPROMS 1 /* 2 EEPROMs (addr:50,52) */ + + +/* + * RTC configuration + */ +#define CONFIG_RTC_DS1337 1 +#define CFG_I2C_RTC_ADDR 0x68 + /* * Environment settings @@ -302,4 +367,15 @@ /* Not needed for MPC 5xxx U-Boot, but used by tools/updater */ #define CFG_RESET_ADDRESS 0xfff00100 +/* pass open firmware flat tree */ +#define CONFIG_OF_FLAT_TREE 1 +#define CONFIG_OF_BOARD_SETUP 1 + +/* maximum size of the flat tree (8K) */ +#define OF_FLAT_TREE_MAX_SIZE 8192 +#define OF_CPU "PowerPC,5200@0" +#define OF_SOC "soc5200@f0000000" +#define OF_TBCLK (bd->bi_busfreq / 4) +#define OF_STDOUT_PAT "/soc5200@f0000000/serial@2000" + #endif /* __CONFIG_H */ diff --git a/include/configs/xupv2p.h b/include/configs/xupv2p.h index a2f4810..b4c720d 100644 --- a/include/configs/xupv2p.h +++ b/include/configs/xupv2p.h @@ -132,6 +132,8 @@ CFG_CMD_LOADS |\ CFG_CMD_LOADB |\ CFG_CMD_MISC |\ + CFG_CMD_FAT |\ + CFG_CMD_EXT2 |\ CFG_CMD_PING \ ) @@ -163,12 +165,12 @@ "base 0;" \ "echo" - /* system ace */ -/*#define CONFIG_SYSTEMACE -#define DEBUG_SYSTEMACE -#define CFG_SYSTEMACE_BASE 0xCF000000 -#define CFG_SYSTEMACE_WIDTH 16 -#define CONFIG_DOS_PARTITION*/ +#define CONFIG_SYSTEMACE +/* #define DEBUG_SYSTEMACE */ +#define SYSTEMACE_CONFIG_FPGA +#define CFG_SYSTEMACE_BASE XILINX_SYSACE_BASEADDR +#define CFG_SYSTEMACE_WIDTH XILINX_SYSACE_MEM_WIDTH +#define CONFIG_DOS_PARTITION #endif /* __CONFIG_H */ diff --git a/include/linux/stat.h b/include/linux/stat.h index 43fd53f..37f2924 100644 --- a/include/linux/stat.h +++ b/include/linux/stat.h @@ -67,7 +67,8 @@ struct stat { #endif /* __PPC__ */ -#if defined (__ARM__) || defined (__I386__) || defined (__M68K__) || defined (__bfin__) +#if defined (__ARM__) || defined (__I386__) || defined (__M68K__) || defined (__bfin__) ||\ + defined (__microblaze__) struct stat { unsigned short st_dev; diff --git a/include/mpc83xx.h b/include/mpc83xx.h index c2a4ff5..60fc214 100644 --- a/include/mpc83xx.h +++ b/include/mpc83xx.h @@ -95,6 +95,11 @@ #define SPR_8321E_REV11 0x80660011 #define SPR_8321_REV11 0x80670011 +#define SPR_8311_REV10 0x80B30010 +#define SPR_8311E_REV10 0x80B20010 +#define SPR_8313_REV10 0x80B10010 +#define SPR_8313E_REV10 0x80B00010 + /* SPCR - System Priority Configuration Register */ #define SPCR_PCIHPE 0x10000000 /* PCI Highest Priority Enable */ @@ -121,6 +126,15 @@ #define SPCR_TSEC2BDP_SHIFT (31-29) #define SPCR_TSEC2EP 0x00000003 /* TSEC2 emergency priority */ #define SPCR_TSEC2EP_SHIFT (31-31) + +#elif defined(CONFIG_MPC831X) +/* SPCR bits - MPC831x specific */ +#define SPCR_TSECDP 0x00003000 /* TSEC data priority */ +#define SPCR_TSECDP_SHIFT (31-19) +#define SPCR_TSECEP 0x00000C00 /* TSEC emergency priority */ +#define SPCR_TSECEP_SHIFT (31-21) +#define SPCR_TSECBDP 0x00000300 /* TSEC buffer descriptor priority */ +#define SPCR_TSECBDP_SHIFT (31-23) #endif /* SICRL/H - System I/O Configuration Register Low/High @@ -195,6 +209,36 @@ #define SICRL_PCI_MSRC 0x10000000 #define SICRL_URT_CTPR 0x06000000 #define SICRL_IRQ_CTPR 0x00C00000 + +#elif defined(CONFIG_MPC831X) +/* SICRL bits - MPC831x specific */ +#define SICRL_LBC 0x30000000 +#define SICRL_UART 0x0C000000 +#define SICRL_SPI_A 0x03000000 +#define SICRL_SPI_B 0x00C00000 +#define SICRL_SPI_C 0x00300000 +#define SICRL_SPI_D 0x000C0000 +#define SICRL_USBDR 0x00000C00 +#define SICRL_ETSEC1_A 0x0000000C +#define SICRL_ETSEC2_A 0x00000003 + +/* SICRH bits - MPC831x specific */ +#define SICRH_INTR_A 0x02000000 +#define SICRH_INTR_B 0x00C00000 +#define SICRH_IIC 0x00300000 +#define SICRH_ETSEC2_B 0x000C0000 +#define SICRH_ETSEC2_C 0x00030000 +#define SICRH_ETSEC2_D 0x0000C000 +#define SICRH_ETSEC2_E 0x00003000 +#define SICRH_ETSEC2_F 0x00000C00 +#define SICRH_ETSEC2_G 0x00000300 +#define SICRH_ETSEC1_B 0x00000080 +#define SICRH_ETSEC1_C 0x00000060 +#define SICRH_GTX1_DLY 0x00000008 +#define SICRH_GTX2_DLY 0x00000004 +#define SICRH_TSOBI1 0x00000002 +#define SICRH_TSOBI2 0x00000001 + #endif /* SWCRR - System Watchdog Control Register @@ -393,6 +437,28 @@ #define HRCWH_ROM_LOC_LOCAL_16BIT 0x00600000 #define HRCWH_ROM_LOC_LOCAL_32BIT 0x00700000 +#if defined(CONFIG_MPC831X) +#define HRCWH_ROM_LOC_NAND_SP_8BIT 0x00100000 +#define HRCWH_ROM_LOC_NAND_SP_16BIT 0x00200000 +#define HRCWH_ROM_LOC_NAND_LP_8BIT 0x00500000 +#define HRCWH_ROM_LOC_NAND_LP_16BIT 0x00600000 + +#define HRCWH_RL_EXT_LEGACY 0x00000000 +#define HRCWH_RL_EXT_NAND 0x00040000 + +#define HRCWH_TSEC1M_IN_MII 0x00000000 +#define HRCWH_TSEC1M_IN_RMII 0x00002000 +#define HRCWH_TSEC1M_IN_RGMII 0x00006000 +#define HRCWH_TSEC1M_IN_RTBI 0x0000A000 +#define HRCWH_TSEC1M_IN_SGMII 0x0000C000 + +#define HRCWH_TSEC2M_IN_MII 0x00000000 +#define HRCWH_TSEC2M_IN_RMII 0x00000400 +#define HRCWH_TSEC2M_IN_RGMII 0x00000C00 +#define HRCWH_TSEC2M_IN_RTBI 0x00001400 +#define HRCWH_TSEC2M_IN_SGMII 0x00001800 +#endif + #if defined(CONFIG_MPC834X) #define HRCWH_TSEC1M_IN_RGMII 0x00000000 #define HRCWH_TSEC1M_IN_RTBI 0x00004000 @@ -523,6 +589,18 @@ #define SCCR_TSEC2CM_1 0x10000000 #define SCCR_TSEC2CM_2 0x20000000 #define SCCR_TSEC2CM_3 0x30000000 + +#elif defined(CONFIG_MPC831X) +/* TSEC1 bits are for TSEC2 as well */ +#define SCCR_TSEC1CM 0xc0000000 +#define SCCR_TSEC1CM_SHIFT 30 +#define SCCR_TSEC1CM_1 0x40000000 +#define SCCR_TSEC1CM_2 0x80000000 +#define SCCR_TSEC1CM_3 0xC0000000 + +#define SCCR_TSEC1ON 0x20000000 +#define SCCR_TSEC2ON 0x10000000 + #endif #define SCCR_USBMPHCM 0x00c00000 @@ -556,6 +634,25 @@ #define CSCONFIG_COL_BIT_10 0x00000002 #define CSCONFIG_COL_BIT_11 0x00000003 +/* TIMING_CFG_0 - DDR SDRAM Timing Configuration 0 + */ +#define TIMING_CFG0_RWT 0xC0000000 +#define TIMING_CFG0_RWT_SHIFT 30 +#define TIMING_CFG0_WRT 0x30000000 +#define TIMING_CFG0_WRT_SHIFT 28 +#define TIMING_CFG0_RRT 0x0C000000 +#define TIMING_CFG0_RRT_SHIFT 26 +#define TIMING_CFG0_WWT 0x03000000 +#define TIMING_CFG0_WWT_SHIFT 24 +#define TIMING_CFG0_ACT_PD_EXIT 0x00700000 +#define TIMING_CFG0_ACT_PD_EXIT_SHIFT 20 +#define TIMING_CFG0_PRE_PD_EXIT 0x00070000 +#define TIMING_CFG0_PRE_PD_EXIT_SHIFT 16 +#define TIMING_CFG0_ODT_PD_EXIT 0x00000F00 +#define TIMING_CFG0_ODT_PD_EXIT_SHIFT 8 +#define TIMING_CFG0_MRS_CYC 0x00000F00 +#define TIMING_CFG0_MRS_CYC_SHIFT 0 + /* TIMING_CFG_1 - DDR SDRAM Timing Configuration 1 */ #define TIMING_CFG1_PRETOACT 0x70000000 @@ -586,6 +683,17 @@ #define TIMING_CFG2_WR_DATA_DELAY_SHIFT 10 #define TIMING_CFG2_CPO_DEF 0x00000000 /* default (= CASLAT + 1) */ +#define TIMING_CFG2_ADD_LAT 0x70000000 +#define TIMING_CFG2_ADD_LAT_SHIFT 28 +#define TIMING_CFG2_WR_LAT_DELAY 0x00380000 +#define TIMING_CFG2_WR_LAT_DELAY_SHIFT 19 +#define TIMING_CFG2_RD_TO_PRE 0x0000E000 +#define TIMING_CFG2_RD_TO_PRE_SHIFT 13 +#define TIMING_CFG2_CKE_PLS 0x000001C0 +#define TIMING_CFG2_CKE_PLS_SHIFT 6 +#define TIMING_CFG2_FOUR_ACT 0x0000003F +#define TIMING_CFG2_FOUR_ACT_SHIFT 0 + /* DDR_SDRAM_CFG - DDR SDRAM Control Configuration */ #define SDRAM_CFG_MEM_EN 0x80000000 @@ -593,13 +701,14 @@ #define SDRAM_CFG_ECC_EN 0x20000000 #define SDRAM_CFG_RD_EN 0x10000000 #define SDRAM_CFG_SDRAM_TYPE 0x03000000 +#define SDRAM_CFG_SDRAM_TYPE_DDR 0x02000000 #define SDRAM_CFG_SDRAM_TYPE_SHIFT 24 #define SDRAM_CFG_DYN_PWR 0x00200000 #define SDRAM_CFG_32_BE 0x00080000 #define SDRAM_CFG_8_BE 0x00040000 #define SDRAM_CFG_NCAP 0x00020000 #define SDRAM_CFG_2T_EN 0x00008000 -#define SDRAM_CFG_SDRAM_TYPE_DDR 0x02000000 +#define SDRAM_CFG_BI 0x00000001 /* DDR_SDRAM_MODE - DDR SDRAM Mode Register */ @@ -732,11 +841,15 @@ #define BR_PS_32 0x00001800 /* Port Size 32 bit */ #define BR_DECC 0x00000600 #define BR_DECC_SHIFT 9 +#define BR_DECC_OFF 0x00000000 +#define BR_DECC_CHK 0x00000200 +#define BR_DECC_CHK_GEN 0x00000400 #define BR_WP 0x00000100 #define BR_WP_SHIFT 8 #define BR_MSEL 0x000000E0 #define BR_MSEL_SHIFT 5 #define BR_MS_GPCM 0x00000000 /* GPCM */ +#define BR_MS_FCM 0x00000020 /* FCM */ #define BR_MS_SDRAM 0x00000060 /* SDRAM */ #define BR_MS_UPMA 0x00000080 /* UPMA */ #define BR_MS_UPMB 0x000000A0 /* UPMB */ @@ -803,6 +916,34 @@ #define OR_GPCM_EAD 0x00000001 #define OR_GPCM_EAD_SHIFT 0 +#define OR_FCM_AM 0xFFFF8000 +#define OR_FCM_AM_SHIFT 15 +#define OR_FCM_BCTLD 0x00001000 +#define OR_FCM_BCTLD_SHIFT 12 +#define OR_FCM_PGS 0x00000400 +#define OR_FCM_PGS_SHIFT 10 +#define OR_FCM_CSCT 0x00000200 +#define OR_FCM_CSCT_SHIFT 9 +#define OR_FCM_CST 0x00000100 +#define OR_FCM_CST_SHIFT 8 +#define OR_FCM_CHT 0x00000080 +#define OR_FCM_CHT_SHIFT 7 +#define OR_FCM_SCY 0x00000070 +#define OR_FCM_SCY_SHIFT 4 +#define OR_FCM_SCY_1 0x00000010 +#define OR_FCM_SCY_2 0x00000020 +#define OR_FCM_SCY_3 0x00000030 +#define OR_FCM_SCY_4 0x00000040 +#define OR_FCM_SCY_5 0x00000050 +#define OR_FCM_SCY_6 0x00000060 +#define OR_FCM_SCY_7 0x00000070 +#define OR_FCM_RST 0x00000008 +#define OR_FCM_RST_SHIFT 3 +#define OR_FCM_TRLX 0x00000004 +#define OR_FCM_TRLX_SHIFT 2 +#define OR_FCM_EHTR 0x00000002 +#define OR_FCM_EHTR_SHIFT 1 + #define OR_UPM_AM 0xFFFF8000 #define OR_UPM_AM_SHIFT 15 #define OR_UPM_XAM 0x00006000 @@ -1019,4 +1160,118 @@ #define PIWAR_IWS_1G 0x0000001D #define PIWAR_IWS_2G 0x0000001E +/* PMCCR1 - PCI Configuration Register 1 + */ +#define PMCCR1_POWER_OFF 0x00000020 + +/* FMR - Flash Mode Register + */ +#define FMR_CWTO 0x0000F000 +#define FMR_CWTO_SHIFT 12 +#define FMR_BOOT 0x00000800 +#define FMR_ECCM 0x00000100 +#define FMR_AL 0x00000030 +#define FMR_AL_SHIFT 4 +#define FMR_OP 0x00000003 +#define FMR_OP_SHIFT 0 + +/* FIR - Flash Instruction Register + */ +#define FIR_OP0 0xF0000000 +#define FIR_OP0_SHIFT 28 +#define FIR_OP1 0x0F000000 +#define FIR_OP1_SHIFT 24 +#define FIR_OP2 0x00F00000 +#define FIR_OP2_SHIFT 20 +#define FIR_OP3 0x000F0000 +#define FIR_OP3_SHIFT 16 +#define FIR_OP4 0x0000F000 +#define FIR_OP4_SHIFT 12 +#define FIR_OP5 0x00000F00 +#define FIR_OP5_SHIFT 8 +#define FIR_OP6 0x000000F0 +#define FIR_OP6_SHIFT 4 +#define FIR_OP7 0x0000000F +#define FIR_OP7_SHIFT 0 +#define FIR_OP_NOP 0x0 /* No operation and end of sequence */ +#define FIR_OP_CA 0x1 /* Issue current column address */ +#define FIR_OP_PA 0x2 /* Issue current block+page address */ +#define FIR_OP_UA 0x3 /* Issue user defined address */ +#define FIR_OP_CM0 0x4 /* Issue command from FCR[CMD0] */ +#define FIR_OP_CM1 0x5 /* Issue command from FCR[CMD1] */ +#define FIR_OP_CM2 0x6 /* Issue command from FCR[CMD2] */ +#define FIR_OP_CM3 0x7 /* Issue command from FCR[CMD3] */ +#define FIR_OP_WB 0x8 /* Write FBCR bytes from FCM buffer */ +#define FIR_OP_WS 0x9 /* Write 1 or 2 bytes from MDR[AS] */ +#define FIR_OP_RB 0xA /* Read FBCR bytes to FCM buffer */ +#define FIR_OP_RS 0xB /* Read 1 or 2 bytes to MDR[AS] */ +#define FIR_OP_CW0 0xC /* Wait then issue FCR[CMD0] */ +#define FIR_OP_CW1 0xD /* Wait then issue FCR[CMD1] */ +#define FIR_OP_RBW 0xE /* Wait then read FBCR bytes */ +#define FIR_OP_RSW 0xF /* Wait then read 1 or 2 bytes */ + +/* FCR - Flash Command Register + */ +#define FCR_CMD0 0xFF000000 +#define FCR_CMD0_SHIFT 24 +#define FCR_CMD1 0x00FF0000 +#define FCR_CMD1_SHIFT 16 +#define FCR_CMD2 0x0000FF00 +#define FCR_CMD2_SHIFT 8 +#define FCR_CMD3 0x000000FF +#define FCR_CMD3_SHIFT 0 + +/* FBAR - Flash Block Address Register + */ +#define FBAR_BLK 0x00FFFFFF + +/* FPAR - Flash Page Address Register + */ +#define FPAR_SP_PI 0x00007C00 +#define FPAR_SP_PI_SHIFT 10 +#define FPAR_SP_MS 0x00000200 +#define FPAR_SP_CI 0x000001FF +#define FPAR_SP_CI_SHIFT 0 +#define FPAR_LP_PI 0x0003F000 +#define FPAR_LP_PI_SHIFT 12 +#define FPAR_LP_MS 0x00000800 +#define FPAR_LP_CI 0x000007FF +#define FPAR_LP_CI_SHIFT 0 + +/* LTESR - Transfer Error Status Register + */ +#define LTESR_BM 0x80000000 +#define LTESR_FCT 0x40000000 +#define LTESR_PAR 0x20000000 +#define LTESR_WP 0x04000000 +#define LTESR_ATMW 0x00800000 +#define LTESR_ATMR 0x00400000 +#define LTESR_CS 0x00080000 +#define LTESR_CC 0x00000001 + +/* DDR Control Driver Register + */ +#define DDRCDR_EN 0x40000000 +#define DDRCDR_PZ 0x3C000000 +#define DDRCDR_PZ_MAXZ 0x00000000 +#define DDRCDR_PZ_HIZ 0x20000000 +#define DDRCDR_PZ_NOMZ 0x30000000 +#define DDRCDR_PZ_LOZ 0x38000000 +#define DDRCDR_PZ_MINZ 0x3C000000 +#define DDRCDR_NZ 0x3C000000 +#define DDRCDR_NZ_MAXZ 0x00000000 +#define DDRCDR_NZ_HIZ 0x02000000 +#define DDRCDR_NZ_NOMZ 0x03000000 +#define DDRCDR_NZ_LOZ 0x03800000 +#define DDRCDR_NZ_MINZ 0x03C00000 +#define DDRCDR_ODT 0x00080000 +#define DDRCDR_DDR_CFG 0x00040000 +#define DDRCDR_M_ODR 0x00000002 +#define DDRCDR_Q_DRN 0x00000001 + +#ifndef __ASSEMBLY__ +struct pci_region; +void mpc83xx_pci_init(int num_buses, struct pci_region **reg, int warmboot); +#endif + #endif /* __MPC83XX_H__ */ diff --git a/lib_ppc/board.c b/lib_ppc/board.c index 24e8e97..1e7f172 100644 --- a/lib_ppc/board.c +++ b/lib_ppc/board.c @@ -310,10 +310,6 @@ init_fnc_t *init_sequence[] = { prt_8260_clks, #endif /* CONFIG_8260 */ -#if defined(CONFIG_MPC83XX) - print_clock_conf, -#endif - checkcpu, #if defined(CONFIG_MPC5xxx) prt_mpc5xxx_clks, |