ppc4xx: Add initial Zeus (PPC405EP) board support

Signed-off-by: Stefan Roese <sr@denx.de>

16 files changed, 1344 insertions, 44 deletions

diff --git a/MAINTAINERS b/MAINTAINERS
index 6dd43f8..853afeb 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -293,6 +293,7 @@ Stefan Roese <sr@denx.de>
 	walnut			PPC405GP
 	yellowstone		PPC440GR
 	yosemite		PPC440EP
+	zeus			PPC405EP
 
 	P3M750			PPC750FX/GX/GL
 
diff --git a/MAKEALL b/MAKEALL
index f69134a..00cb6b5 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -91,7 +91,7 @@ LIST_4xx="	\
 	sc3		sequoia		sequoia_nand	taihu		\
 	taishan		VOH405		VOM405		W7OLMC		\
 	W7OLMG		walnut		WUH405		XPEDITE1K	\
-	yellowstone	yosemite	yucca				\
+	yellowstone	yosemite	yucca		zeus		\
 "
 
 #########################################################################
diff --git a/Makefile b/Makefile
index d4fd34e..d75f8fd 100644
--- a/Makefile
+++ b/Makefile
@@ -1294,6 +1294,9 @@ yellowstone_config: unconfig
 yucca_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx yucca amcc
 
+zeus_config:	unconfig
+	@$(MKCONFIG) $(@:_config=) ppc ppc4xx zeus
+
 #########################################################################
 ## MPC8220 Systems
 #########################################################################
diff --git a/board/amcc/bubinga/bubinga.c b/board/amcc/bubinga/bubinga.c
index fe6ce8a..66e7509 100644
--- a/board/amcc/bubinga/bubinga.c
+++ b/board/amcc/bubinga/bubinga.c
@@ -20,10 +20,12 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  * MA 02111-1307 USA
  */
-long int spd_sdram(void);
 
 #include <common.h>
 #include <asm/processor.h>
+#include <asm/io.h>
+
+long int spd_sdram(void);
 
 int board_early_init_f(void)
 {
@@ -34,6 +36,15 @@ int board_early_init_f(void)
 	mtdcr(uictr, 0x00000010);	/* set int trigger levels */
 	mtdcr(uicsr, 0xFFFFFFFF);	/* clear all ints */
 
+	/*
+	 * Configure CPC0_PCI to enable PerWE as output
+	 * and enable the internal PCI arbiter if selected
+	 */
+	if (in_8((void *)FPGA_REG1) & FPGA_REG1_PCI_INT_ARB)
+		mtdcr(cpc0_pci, CPC0_PCI_HOST_CFG_EN | CPC0_PCI_ARBIT_EN);
+	else
+		mtdcr(cpc0_pci, CPC0_PCI_HOST_CFG_EN);
+
 	return 0;
 }
 
diff --git a/board/amcc/taihu/taihu.c b/board/amcc/taihu/taihu.c
index ee9d3b5..ea83671 100644
--- a/board/amcc/taihu/taihu.c
+++ b/board/amcc/taihu/taihu.c
@@ -50,6 +50,12 @@ int board_early_init_f(void)
 	mtebc(pb3ap, CFG_EBC_PB3AP);	/* memory bank 3 (CPLD_LCM) initialization */
 	mtebc(pb3cr, CFG_EBC_PB3CR);
 
+	/*
+	 * Configure CPC0_PCI to enable PerWE as output
+	 * and enable the internal PCI arbiter
+	 */
+	mtdcr(cpc0_pci, CPC0_PCI_SPE | CPC0_PCI_HOST_CFG_EN | CPC0_PCI_ARBIT_EN);
+
 	return 0;
 }
 
diff --git a/board/zeus/Makefile b/board/zeus/Makefile
new file mode 100644
index 0000000..f0d4e9f
--- /dev/null
+++ b/board/zeus/Makefile
@@ -0,0 +1,51 @@
+#
+# (C) Copyright 2007
+# Stefan Roese, DENX Software Engineering, sr@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).a
+
+COBJS	= $(BOARD).o update.o
+SOBJS   =
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(OBJS) $(SOBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/zeus/config.mk b/board/zeus/config.mk
new file mode 100644
index 0000000..1bdf5e4
--- /dev/null
+++ b/board/zeus/config.mk
@@ -0,0 +1,24 @@
+#
+# (C) Copyright 2000
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+TEXT_BASE = 0xFFFC0000
diff --git a/board/zeus/u-boot.lds b/board/zeus/u-boot.lds
new file mode 100644
index 0000000..73b83eb
--- /dev/null
+++ b/board/zeus/u-boot.lds
@@ -0,0 +1,133 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+SECTIONS
+{
+  .resetvec 0xFFFFFFFC :
+  {
+    *(.resetvec)
+  } = 0xffff
+
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)		}
+  .rela.text     : { *(.rela.text) 	}
+  .rel.data      : { *(.rel.data)		}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
+  .rel.got       : { *(.rel.got)		}
+  .rela.got      : { *(.rela.got)		}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)		}
+  .rela.bss      : { *(.rela.bss)		}
+  .rel.plt       : { *(.rel.plt)		}
+  .rela.plt      : { *(.rela.plt)		}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    cpu/ppc4xx/start.o	(.text)
+
+    *(.text)
+    *(.fixup)
+    *(.got1)
+  }
+  _etext = .;
+  PROVIDE (etext = .);
+  .rodata    :
+  {
+    *(.rodata)
+    *(.rodata1)
+    *(.rodata.str1.4)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x00FF) & 0xFFFFFF00;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  . = .;
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+  . = .;
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(256);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(256);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+  _end = . ;
+  PROVIDE (end = .);
+}
diff --git a/board/zeus/update.c b/board/zeus/update.c
new file mode 100644
index 0000000..c76519f
--- /dev/null
+++ b/board/zeus/update.c
@@ -0,0 +1,105 @@
+/*
+ * (C) Copyright 2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <common.h>
+#include <command.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <asm/gpio.h>
+#include <i2c.h>
+
+#if defined(CONFIG_ZEUS)
+
+u8 buf_zeus_ce[] = {
+/*00    01    02    03    04    05    06    07 */
+  0x05, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+/*08    09    0a    0b    0c    0d    0e    0f */
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+/*10    11    12    13    14    15    16    17 */
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+/*18    19    1a    1b    1c    1d    1e    1f */
+  0x00, 0xc0, 0x50, 0x12, 0x72, 0x3e, 0x00, 0x00 };
+
+u8 buf_zeus_pe[] = {
+
+/* CPU_CLOCK_DIV 1    = 00
+   CPU_PLB_FREQ_DIV 3 = 10
+   OPB_PLB_FREQ_DIV 2 = 01
+   EBC_PLB_FREQ_DIV 2 = 00
+   MAL_PLB_FREQ_DIV 1 = 00
+   PCI_PLB_FRQ_DIV 3  = 10
+   PLL_PLLOUTA        = IS SET
+   PLL_OPERATING      = IS NOT SET
+   PLL_FDB_MUL 10     = 1010
+   PLL_FWD_DIV_A 3    = 101
+   PLL_FWD_DIV_B 3    = 101
+   TUNE               = 0x2be */
+/*00    01    02    03    04    05    06    07 */
+  0x05, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+/*08    09    0a    0b    0c    0d    0e    0f */
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+/*10    11    12    13    14    15    16    17 */
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+/*18    19    1a    1b    1c    1d    1e    1f */
+  0x00, 0x60, 0x68, 0x2d, 0x42, 0xbe, 0x00, 0x00 };
+
+static int update_boot_eeprom(void)
+{
+	u32 len = 0x20;
+	u8 chip = CFG_I2C_EEPROM_ADDR;
+	u8 *pbuf;
+	u8 base;
+	int i;
+
+	if (in_be32((void *)GPIO0_IR) & GPIO_VAL(CFG_GPIO_ZEUS_PE)) {
+		pbuf = buf_zeus_pe;
+		base = 0x40;
+	} else {
+		pbuf = buf_zeus_ce;
+		base = 0x00;
+	}
+
+	for (i = 0; i < len; i++, base++) {
+		if (i2c_write(chip, base, 1, &pbuf[i], 1) != 0) {
+			printf("i2c_write fail\n");
+			return 1;
+		}
+		udelay(11000);
+	}
+
+	return 0;
+}
+
+int do_update_boot_eeprom(cmd_tbl_t* cmdtp, int flag, int argc, char* argv[])
+{
+	return update_boot_eeprom();
+}
+
+U_BOOT_CMD (
+	update_boot_eeprom, 1, 1, do_update_boot_eeprom,
+	"update_boot_eeprom  - update boot eeprom content\n",
+	NULL
+);
+
+#endif
diff --git a/board/zeus/zeus.c b/board/zeus/zeus.c
new file mode 100644
index 0000000..4ab853f
--- /dev/null
+++ b/board/zeus/zeus.c
@@ -0,0 +1,511 @@
+/*
+ * (C) Copyright 2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <malloc.h>
+#include <environment.h>
+#include <logbuff.h>
+#include <post.h>
+
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <asm/gpio.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define REBOOT_MAGIC	0x07081967
+#define REBOOT_NOP	0x00000000
+#define REBOOT_DO_POST	0x00000001
+
+extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+extern env_t *env_ptr;
+extern uchar default_environment[];
+
+ulong flash_get_size(ulong base, int banknum);
+void env_crc_update(void);
+int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+
+static u32 start_time;
+
+int board_early_init_f(void)
+{
+	mtdcr(uicsr, 0xFFFFFFFF);	/* clear all ints */
+	mtdcr(uicer, 0x00000000);	/* disable all ints */
+	mtdcr(uiccr, 0x00000000);
+	mtdcr(uicpr, 0xFFFF7F00);	/* set int polarities */
+	mtdcr(uictr, 0x00000000);	/* set int trigger levels */
+	mtdcr(uicsr, 0xFFFFFFFF);	/* clear all ints */
+	mtdcr(uicvcr, 0x00000001);	/* set vect base=0,INT0 highest priority */
+
+	/*
+	 * Configure CPC0_PCI to enable PerWE as output
+	 */
+	mtdcr(cpc0_pci, CPC0_PCI_SPE);
+
+	return 0;
+}
+
+int misc_init_r(void)
+{
+	u32 pbcr;
+	int size_val = 0;
+	u32 post_magic;
+	u32 post_val;
+
+	post_magic = in_be32((void *)CFG_POST_MAGIC);
+	post_val = in_be32((void *)CFG_POST_VAL);
+	if ((post_magic == REBOOT_MAGIC) && (post_val == REBOOT_DO_POST)) {
+		/*
+		 * Set special bootline bootparameter to pass this POST boot
+		 * mode to Linux to reset the username/password
+		 */
+		setenv("addmisc", "setenv bootargs \\${bootargs} factory_reset=yes");
+
+		/*
+		 * Normally don't run POST tests, only when enabled
+		 * via the sw-reset button. So disable further tests
+		 * upon next bootup here.
+		 */
+		out_be32((void *)CFG_POST_VAL, REBOOT_NOP);
+	} else {
+		/*
+		 * Only run POST when initiated via the sw-reset button mechanism
+		 */
+		post_word_store(0);
+	}
+
+	/*
+	 * Get current time
+	 */
+	start_time = get_timer(0);
+
+	/*
+	 * FLASH stuff...
+	 */
+
+	/* Re-do sizing to get full correct info */
+
+	/* adjust flash start and offset */
+	mfebc(pb0cr, pbcr);
+	switch (gd->bd->bi_flashsize) {
+	case 1 << 20:
+		size_val = 0;
+		break;
+	case 2 << 20:
+		size_val = 1;
+		break;
+	case 4 << 20:
+		size_val = 2;
+		break;
+	case 8 << 20:
+		size_val = 3;
+		break;
+	case 16 << 20:
+		size_val = 4;
+		break;
+	case 32 << 20:
+		size_val = 5;
+		break;
+	case 64 << 20:
+		size_val = 6;
+		break;
+	case 128 << 20:
+		size_val = 7;
+		break;
+	}
+	pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17);
+	mtebc(pb0cr, pbcr);
+
+	/*
+	 * Re-check to get correct base address
+	 */
+	flash_get_size(gd->bd->bi_flashstart, 0);
+
+	/* Monitor protection ON by default */
+	(void)flash_protect(FLAG_PROTECT_SET,
+			    -CFG_MONITOR_LEN,
+			    0xffffffff,
+			    &flash_info[0]);
+
+	/* Env protection ON by default */
+	(void)flash_protect(FLAG_PROTECT_SET,
+			    CFG_ENV_ADDR_REDUND,
+			    CFG_ENV_ADDR_REDUND + 2*CFG_ENV_SECT_SIZE - 1,
+			    &flash_info[0]);
+
+	return 0;
+}
+
+/*
+ * Check Board Identity:
+ */
+int checkboard(void)
+{
+	char *s = getenv("serial#");
+
+	puts("Board: Zeus-");
+
+	if (in_be32((void *)GPIO0_IR) & GPIO_VAL(CFG_GPIO_ZEUS_PE))
+		puts("PE");
+	else
+		puts("CE");
+
+	puts(" of BulletEndPoint");
+
+	if (s != NULL) {
+		puts(", serial# ");
+		puts(s);
+	}
+	putc('\n');
+
+	/* both LED's off */
+	gpio_write_bit(CFG_GPIO_LED_RED, 0);
+	gpio_write_bit(CFG_GPIO_LED_GREEN, 0);
+	udelay(10000);
+	/* and on again */
+	gpio_write_bit(CFG_GPIO_LED_RED, 1);
+	gpio_write_bit(CFG_GPIO_LED_GREEN, 1);
+
+	return (0);
+}
+
+static u32 detect_sdram_size(void)
+{
+	u32 val;
+	u32 size;
+
+	mfsdram(mem_mb0cf, val);
+	size = (4 << 20) << ((val & 0x000e0000) >> 17);
+
+	/*
+	 * Check if 2nd bank is enabled too
+	 */
+	mfsdram(mem_mb1cf, val);
+	if (val & 1)
+		size += (4 << 20) << ((val & 0x000e0000) >> 17);
+
+	return size;
+}
+
+long int initdram (int board_type)
+{
+	return detect_sdram_size();
+}
+
+#if defined(CFG_DRAM_TEST)
+int testdram(void)
+{
+	unsigned long *mem = (unsigned long *)0;
+	const unsigned long kend = (1024 / sizeof(unsigned long));
+	unsigned long k, n;
+	unsigned long msr;
+	unsigned long total_kbytes;
+
+	total_kbytes = detect_sdram_size();
+
+	msr = mfmsr();
+	mtmsr(msr & ~(MSR_EE));
+
+	for (k = 0; k < total_kbytes ;
+	     ++k, mem += (1024 / sizeof(unsigned long))) {
+		if ((k & 1023) == 0) {
+			printf("%3d MB\r", k / 1024);
+		}
+
+		memset(mem, 0xaaaaaaaa, 1024);
+		for (n = 0; n < kend; ++n) {
+			if (mem[n] != 0xaaaaaaaa) {
+				printf("SDRAM test fails at: %08x\n",
+				       (uint) & mem[n]);
+				return 1;
+			}
+		}
+
+		memset(mem, 0x55555555, 1024);
+		for (n = 0; n < kend; ++n) {
+			if (mem[n] != 0x55555555) {
+				printf("SDRAM test fails at: %08x\n",
+				       (uint) & mem[n]);
+				return 1;
+			}
+		}
+	}
+	printf("SDRAM test passes\n");
+	mtmsr(msr);
+
+	return 0;
+}
+#endif
+
+static int default_env_var(char *buf, char *var)
+{
+	char *ptr;
+	char *val;
+
+	/*
+	 * Find env variable
+	 */
+	ptr = strstr(buf + 4, var);
+	if (ptr == NULL) {
+		printf("ERROR: %s not found!\n", var);
+		return -1;
+	}
+	ptr += strlen(var) + 1;
+
+	/*
+	 * Now the ethaddr needs to be updated in the "normal"
+	 * environment storage -> redundant flash.
+	 */
+	val = ptr;
+	setenv(var, val);
+	printf("Updated %s from eeprom to %s!\n", var, val);
+
+	return 0;
+}
+
+static int restore_default(void)
+{
+	char *buf;
+	char *buf_save;
+	u32 crc;
+
+	/*
+	 * Unprotect and erase environment area
+	 */
+	flash_protect(FLAG_PROTECT_CLEAR,
+		      CFG_ENV_ADDR_REDUND,
+		      CFG_ENV_ADDR_REDUND + 2*CFG_ENV_SECT_SIZE - 1,
+		      &flash_info[0]);
+
+	flash_sect_erase(CFG_ENV_ADDR_REDUND,
+			 CFG_ENV_ADDR_REDUND + 2*CFG_ENV_SECT_SIZE - 1);
+
+	/*
+	 * Now restore default environment from U-Boot image
+	 * -> ipaddr, serverip...
+	 */
+	memset(env_ptr, 0, sizeof(env_t));
+	memcpy(env_ptr->data, default_environment, ENV_SIZE);
+#ifdef CFG_REDUNDAND_ENVIRONMENT
+	env_ptr->flags = 0xFF;
+#endif
+	env_crc_update();
+	gd->env_valid = 1;
+
+	/*
+	 * Read board specific values from I2C EEPROM
+	 * and set env variables accordingly
+	 * -> ethaddr, eth1addr, serial#
+	 */
+	buf = buf_save = malloc(FACTORY_RESET_ENV_SIZE);
+	if (eeprom_read(FACTORY_RESET_I2C_EEPROM, FACTORY_RESET_ENV_OFFS,
+			(u8 *)buf, FACTORY_RESET_ENV_SIZE)) {
+		puts("\nError reading EEPROM!\n");
+	} else {
+		crc = crc32(0, (u8 *)(buf + 4), FACTORY_RESET_ENV_SIZE - 4);
+		if (crc != *(u32 *)buf) {
+			printf("ERROR: crc mismatch %08lx %08lx\n", crc, *(u32 *)buf);
+			return -1;
+		}
+
+		default_env_var(buf, "ethaddr");
+		buf += 8 + 18;
+		default_env_var(buf, "eth1addr");
+		buf += 9 + 18;
+		default_env_var(buf, "serial#");
+	}
+
+	/*
+	 * Finally save updated env variables back to flash
+	 */
+	saveenv();
+
+	free(buf_save);
+
+	return 0;
+}
+
+int do_set_default(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	char *buf;
+	char *buf_save;
+	char str[32];
+	u32 crc;
+	char var[32];
+
+	if (argc < 4) {
+		puts("ERROR!\n");
+		return -1;
+	}
+
+	buf = buf_save = malloc(FACTORY_RESET_ENV_SIZE);
+	memset(buf, 0, FACTORY_RESET_ENV_SIZE);
+
+	strcpy(var, "ethaddr");
+	printf("Setting %s to %s\n", var, argv[1]);
+	sprintf(str, "%s=%s", var, argv[1]);
+	strcpy(buf + 4, str);
+	buf += strlen(str) + 1;
+
+	strcpy(var, "eth1addr");
+	printf("Setting %s to %s\n", var, argv[2]);
+	sprintf(str, "%s=%s", var, argv[2]);
+	strcpy(buf + 4, str);
+	buf += strlen(str) + 1;
+
+	strcpy(var, "serial#");
+	printf("Setting %s to %s\n", var, argv[3]);
+	sprintf(str, "%s=%s", var, argv[3]);
+	strcpy(buf + 4, str);
+
+	crc = crc32(0, (u8 *)(buf_save + 4), FACTORY_RESET_ENV_SIZE - 4);
+	*(u32 *)buf_save = crc;
+
+	if (eeprom_write(FACTORY_RESET_I2C_EEPROM, FACTORY_RESET_ENV_OFFS,
+			 (u8 *)buf_save, FACTORY_RESET_ENV_SIZE)) {
+		puts("\nError writing EEPROM!\n");
+		return -1;
+	}
+
+	free(buf_save);
+
+	return 0;
+}
+
+U_BOOT_CMD(
+	setdef,	4,	1,	do_set_default,
+	"setdef  - write board-specific values to EEPROM (ethaddr...)\n",
+	"ethaddr eth1addr serial#\n    - write board-specific values to EEPROM\n"
+	);
+
+static inline int sw_reset_pressed(void)
+{
+	return !(in_be32((void *)GPIO0_IR) & GPIO_VAL(CFG_GPIO_SW_RESET));
+}
+
+int do_chkreset(cmd_tbl_t* cmdtp, int flag, int argc, char* argv[])
+{
+	int delta;
+	int count = 0;
+	int post = 0;
+	int factory_reset = 0;
+
+	if (!sw_reset_pressed()) {
+		printf("SW-Reset already high (Button released)\n");
+		printf("-> No action taken!\n");
+		return 0;
+	}
+
+	printf("Waiting for SW-Reset button to be released.");
+
+	while (1) {
+		delta = get_timer(start_time);
+		if (!sw_reset_pressed())
+			break;
+
+		if ((delta > CFG_TIME_POST) && !post) {
+			printf("\nWhen released now, POST tests will be started.");
+			gpio_write_bit(CFG_GPIO_LED_GREEN, 0);
+			post = 1;
+		}
+
+		if ((delta > CFG_TIME_FACTORY_RESET) && !factory_reset) {
+			printf("\nWhen released now, factory default values"
+			       " will be restored.");
+			gpio_write_bit(CFG_GPIO_LED_RED, 0);
+			factory_reset = 1;
+		}
+
+		udelay(1000);
+		if (!(count++ % 1000))
+			printf(".");
+	}
+
+
+	printf("\nSW-Reset Button released after %d milli-seconds!\n", delta);
+
+	if (delta > CFG_TIME_FACTORY_RESET) {
+		printf("Starting factory reset value restoration...\n");
+
+		/*
+		 * Restore default setting
+		 */
+		restore_default();
+
+		/*
+		 * Reset the board for default to become valid
+		 */
+		do_reset(NULL, 0, 0, NULL);
+
+		return 0;
+	}
+
+	if (delta > CFG_TIME_POST) {
+		printf("Starting POST configuration...\n");
+
+		/*
+		 * Enable POST upon next bootup
+		 */
+		out_be32((void *)CFG_POST_MAGIC, REBOOT_MAGIC);
+		out_be32((void *)CFG_POST_VAL, REBOOT_DO_POST);
+		post_bootmode_init();
+
+		/*
+		 * Reset the logbuffer for a clean start
+		 */
+		logbuff_reset();
+
+		do_reset(NULL, 0, 0, NULL);
+
+		return 0;
+	}
+
+	return 0;
+}
+
+U_BOOT_CMD (
+	chkreset, 1, 1, do_chkreset,
+	"chkreset- Check for status of SW-reset button and act accordingly\n",
+	NULL
+);
+
+#if defined(CONFIG_POST)
+/*
+ * Returns 1 if keys pressed to start the power-on long-running tests
+ * Called from board_init_f().
+ */
+int post_hotkeys_pressed(void)
+{
+	u32 post_magic;
+	u32 post_val;
+
+	post_magic = in_be32((void *)CFG_POST_MAGIC);
+	post_val = in_be32((void *)CFG_POST_VAL);
+
+	if ((post_magic == REBOOT_MAGIC) && (post_val == REBOOT_DO_POST))
+		return 1;
+	else
+		return 0;
+}
+#endif /* CONFIG_POST */
diff --git a/cpu/ppc4xx/sdram.c b/cpu/ppc4xx/sdram.c
index 3a0ca17..2724d91 100644
--- a/cpu/ppc4xx/sdram.c
+++ b/cpu/ppc4xx/sdram.c
@@ -187,14 +187,14 @@ void sdram_init(void)
 		/*
 		 * Disable memory controller.
 		 */
-		mtsdram0(mem_mcopt1, 0x00000000);
+		mtsdram(mem_mcopt1, 0x00000000);
 
 		/*
 		 * Set MB0CF for bank 0.
 		 */
-		mtsdram0(mem_mb0cf, mb0cf[i].reg);
-		mtsdram0(mem_sdtr1, sdtr1);
-		mtsdram0(mem_rtr, compute_rtr(speed, mb0cf[i].rows, 64));
+		mtsdram(mem_mb0cf, mb0cf[i].reg);
+		mtsdram(mem_sdtr1, sdtr1);
+		mtsdram(mem_rtr, compute_rtr(speed, mb0cf[i].rows, 64));
 
 		udelay(200);
 
@@ -203,7 +203,7 @@ void sdram_init(void)
 		 * Set DC_EN to '1' and BRD_PRF to '01' for 16 byte PLB Burst
 		 * read/prefetch.
 		 */
-		mtsdram0(mem_mcopt1, 0x80800000);
+		mtsdram(mem_mcopt1, 0x80800000);
 
 		udelay(10000);
 
@@ -215,10 +215,21 @@ void sdram_init(void)
 #ifdef CONFIG_SDRAM_BANK1
 			u32 b1cr = mb0cf[i].size | mb0cf[i].reg;
 
-			mtsdram0(mem_mcopt1, 0x00000000);
-			mtsdram0(mem_mb1cf, b1cr); /* SDRAM0_B1CR */
-			mtsdram0(mem_mcopt1, 0x80800000);
+			mtsdram(mem_mcopt1, 0x00000000);
+			mtsdram(mem_mb1cf, b1cr); /* SDRAM0_B1CR */
+			mtsdram(mem_mcopt1, 0x80800000);
 			udelay(10000);
+
+			/*
+			 * Check if 2nd bank is really available.
+			 * If the size not equal to the size of the first
+			 * bank, then disable the 2nd bank completely.
+			 */
+			if (get_ram_size((long *)mb0cf[i].size, mb0cf[i].size) !=
+			    mb0cf[i].size) {
+				mtsdram(mem_mb1cf, 0);
+				mtsdram(mem_mcopt1, 0);
+			}
 #endif
 			return;
 		}
diff --git a/cpu/ppc4xx/sdram.h b/cpu/ppc4xx/sdram.h
index 62b5442..4fb9b1a 100644
--- a/cpu/ppc4xx/sdram.h
+++ b/cpu/ppc4xx/sdram.h
@@ -29,8 +29,6 @@
 
 #include <config.h>
 
-#define mtsdram0(reg, data)  mtdcr(memcfga,reg);mtdcr(memcfgd,data)
-
 #define ONE_BILLION	1000000000
 
 struct sdram_conf_s {
diff --git a/cpu/ppc4xx/start.S b/cpu/ppc4xx/start.S
index 18d3445..9626b65 100644
--- a/cpu/ppc4xx/start.S
+++ b/cpu/ppc4xx/start.S
@@ -1869,38 +1869,7 @@ ppc405ep_init:
 	ori	r3,r3,CFG_EBC_PB4CR@l
 	mtdcr	ebccfgd,r3
 #endif
-#ifdef CONFIG_TAIHU
-	mfdcr	r4, CPC0_BOOT
-	andi.	r5, r4, CPC0_BOOT_SEP@l
-	bne	strap_0			/* serial eeprom present */
-#endif
-
-#ifndef CFG_CPC0_PCI
-	li	r3,CPC0_PCI_HOST_CFG_EN
-#ifdef CONFIG_BUBINGA
-	/*
-	!-----------------------------------------------------------------------
-	! Check FPGA for PCI internal/external arbitration
-	!   If board is set to internal arbitration, update cpc0_pci
-	!-----------------------------------------------------------------------
-	*/
-	addis	r5,r0,FPGA_REG1@h      /* set offset for FPGA_REG1 */
-	ori	r5,r5,FPGA_REG1@l
-	lbz	r5,0x0(r5)		/* read to get PCI arb selection */
-	andi.	r6,r5,FPGA_REG1_PCI_INT_ARB  /* using internal arbiter ?*/
-	beq	..pci_cfg_set		  /* if not set, then bypass reg write*/
-#endif
-	ori	r3,r3,CPC0_PCI_ARBIT_EN
-#ifdef CONFIG_TAIHU
-	ori	r3,r3,CPC0_PCI_SPE
-#endif
-#else /* CFG_CPC0_PCI */
-	li	r3,CFG_CPC0_PCI
-#endif /* CFG_CPC0_PCI */
-..pci_cfg_set:
-	mtdcr	CPC0_PCI, r3		 /* Enable internal arbiter*/
 
-strap_0:
 	/*
 	!-----------------------------------------------------------------------
 	! Check to see if chip is in bypass mode.
@@ -1966,6 +1935,21 @@ strap_0:
 	bne	_pci_66mhz
 #endif /* CONFIG_TAIHU */
 
+#if defined(CONFIG_ZEUS)
+	mfdcr	r4, CPC0_BOOT
+	andi.	r5, r4, CPC0_BOOT_SEP@l
+	bne	strap_1  	/* serial eeprom present */
+	lis	r3,0x0000
+	addi	r3,r3,0x3030
+	lis	r4,0x8042
+	addi	r4,r4,0x223e
+	b	1f
+strap_1:
+	mfdcr	r3, CPC0_PLLMR0
+	mfdcr	r4, CPC0_PLLMR1
+	b	1f
+#endif
+
 	addis	r3,0,PLLMR0_DEFAULT@h	    /* PLLMR0 default value */
 	ori	r3,r3,PLLMR0_DEFAULT@l	   /* */
 	addis	r4,0,PLLMR1_DEFAULT@h	    /* PLLMR1 default value */
@@ -1982,9 +1966,9 @@ _pci_66mhz:
 strap_1:
 	mfdcr	r3, CPC0_PLLMR0
 	mfdcr	r4, CPC0_PLLMR1
-1:
 #endif /* CONFIG_TAIHU */
 
+1:
 	b	pll_write		  /* Write the CPC0_PLLMR with new value */
 
 pll_done:
diff --git a/doc/README.zeus b/doc/README.zeus
new file mode 100644
index 0000000..1848d8c
--- /dev/null
+++ b/doc/README.zeus
@@ -0,0 +1,73 @@
+
+Storage of the board specific values (ethaddr...)
+-------------------------------------------------
+
+The board specific environment variables that should be unique
+for each individual board, can be stored in the I2C EEPROM. This
+will be done from offset 0x80 with the length of 0x80 bytes. The
+following command can be used to store the values here:
+
+=> setdef de:20:6a:ed:e2:72 de:20:6a:ed:e2:73 AB0001
+
+	  ethaddr           eth1addr          serial#
+
+Now those 3 values are stored into the I2C EEPROM. A CRC is added
+to make sure that the values get not corrupted.
+
+
+SW-Reset Pushbutton handling:
+-----------------------------
+
+The SW-reset push button is connected to a GPIO input too. This
+way U-Boot can "see" how long the SW-reset was pressed, and a
+specific action can be taken. Two different actions are supported:
+
+a) Release after more than 5 seconds and less then 10 seconds:
+   -> Run POST
+
+   Please note, that the POST test will take a while (approx. 1 min
+   on the 128MByte board). This is mainly due to the system memory
+   test.
+
+b) Release after more than 10 seconds:
+   -> Restore factory default settings
+
+   The factory default values are restored. The default environment
+   variables are restored (ipaddr, serverip...) and the board
+   specific values (ethaddr, eth1addr and serial#) are restored
+   to the environment from the I2C EEPROM. Also a bootline parameter
+   is added to the Linux bootline to signal the Linux kernel upon
+   the next startup, that the factory defaults should be restored.
+
+The command to check this sw-reset status and act accordingly is
+
+=> chkreset
+
+This command is added to the default "bootcmd", so that it is called
+automatically upon startup.
+
+Also, the 2 LED's are used to indicate the current status of this
+command (time passed since pushing the button). When the POST test
+will be run, the green LED will be switched off, and when the
+factory restore will be initiated, the reg LED will be switched off.
+
+
+Loggin of POST results:
+-----------------------
+
+The results of the POST tests are logged in a logbuffer located at the end
+of the onboard memory. It can be accessed with the U-Boot command "log":
+
+=> log show
+<4>POST memory PASSED
+<4>POST cache PASSED
+<4>POST cpu PASSED
+<4>POST uart PASSED
+<4>POST ethernet PASSED
+
+The DENX Linux kernel tree has support for this log buffer included. Exactly
+this buffer is used for logging of all kernel messages too. By enabling the
+compile time option "CONFIG_LOGBUFFER" this support is enabled. This way you
+can access the U-Boot log messages from Linux too.
+
+2007-08-10, Stefan Roese <sr@denx.de>
diff --git a/include/configs/zeus.h b/include/configs/zeus.h
new file mode 100644
index 0000000..86a16e7
--- /dev/null
+++ b/include/configs/zeus.h
@@ -0,0 +1,375 @@
+/*
+ * (C) Copyright 2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/************************************************************************
+ * zeus.h - configuration for Zeus board
+ ***********************************************************************/
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*-----------------------------------------------------------------------
+ * High Level Configuration Options
+ *----------------------------------------------------------------------*/
+#define CONFIG_ZEUS		1		/* Board is Zeus	*/
+#define CONFIG_4xx		1		/* ... PPC4xx family	*/
+#define CONFIG_405EP		1		/* Specifc 405EP support*/
+
+#define CONFIG_SYS_CLK_FREQ     33000000 /* external frequency to pll   */
+
+#define CONFIG_BOARD_EARLY_INIT_F 1		/* Call board_early_init_f */
+#define CONFIG_MISC_INIT_R	1		/* Call misc_init_r	*/
+
+#define PLLMR0_DEFAULT		PLLMR0_333_111_55_111
+#define PLLMR1_DEFAULT		PLLMR1_333_111_55_111
+
+#define CFG_ENV_IS_IN_FLASH     1	/* use FLASH for environment vars	*/
+
+#define CONFIG_OVERWRITE_ETHADDR_ONCE	1
+
+#define CONFIG_MII		1	/* MII PHY management		*/
+#define CONFIG_PHY_ADDR		0x01	/* PHY address			*/
+#define CONFIG_HAS_ETH1		1
+#define CONFIG_PHY1_ADDR	0x11	/* EMAC1 PHY address		*/
+#define CONFIG_NET_MULTI	1
+#define CFG_RX_ETH_BUFFER	16	/* Number of ethernet rx buffers & descriptors */
+#define CONFIG_PHY_RESET	1
+#define CONFIG_PHY_RESET_DELAY	300	/* PHY RESET recovery delay	*/
+
+#define CONFIG_COMMANDS		(CONFIG_CMD_DFL	|	\
+				 CFG_CMD_ASKENV	|	\
+				 CFG_CMD_CACHE	|	\
+				 CFG_CMD_DHCP	|	\
+				 CFG_CMD_DIAG	|	\
+				 CFG_CMD_EEPROM |	\
+				 CFG_CMD_ELF    |	\
+				 CFG_CMD_I2C    |	\
+				 CFG_CMD_IRQ	|	\
+				 CFG_CMD_LOG	|	\
+				 CFG_CMD_MII	|	\
+				 CFG_CMD_NET	|	\
+				 CFG_CMD_NFS	|	\
+				 CFG_CMD_PING	|	\
+				 CFG_CMD_REGINFO)
+
+/* POST support */
+#define CONFIG_POST		(CFG_POST_MEMORY   | \
+				 CFG_POST_CPU	   | \
+				 CFG_POST_CACHE	   | \
+				 CFG_POST_UART	   | \
+				 CFG_POST_ETHER)
+
+#define CFG_POST_ETHER_EXT_LOOPBACK	/* eth POST using ext loopack connector	*/
+
+/* Define here the base-addresses of the UARTs to test in POST */
+#define CFG_POST_UART_TABLE	{UART0_BASE}
+
+#define CONFIG_LOGBUFFER
+#define CFG_POST_CACHE_ADDR	0x00800000 /* free virtual address	*/
+
+#define CFG_CONSOLE_IS_IN_ENV /* Otherwise it catches logbuffer as output */
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+#undef CONFIG_WATCHDOG			/* watchdog disabled		*/
+
+/*-----------------------------------------------------------------------
+ * SDRAM
+ *----------------------------------------------------------------------*/
+/*
+ * SDRAM configuration (please see cpu/ppc/sdram.[ch])
+ */
+#define CONFIG_SDRAM_BANK0	1	/* init onboard SDRAM bank 0 */
+#define CONFIG_SDRAM_BANK1	1	/* init onboard SDRAM bank 1 */
+
+/* SDRAM timings used in datasheet */
+#define CFG_SDRAM_CL            3	/* CAS latency */
+#define CFG_SDRAM_tRP           20	/* PRECHARGE command period */
+#define CFG_SDRAM_tRC           66	/* ACTIVE-to-ACTIVE command period */
+#define CFG_SDRAM_tRCD          20	/* ACTIVE-to-READ delay */
+#define CFG_SDRAM_tRFC		66	/* Auto refresh period */
+
+/*-----------------------------------------------------------------------
+ * Serial Port
+ *----------------------------------------------------------------------*/
+#undef	CFG_EXT_SERIAL_CLOCK			/* external serial clock */
+#define CFG_BASE_BAUD		691200
+#define CONFIG_BAUDRATE		115200
+#define CONFIG_SERIAL_MULTI
+
+/* The following table includes the supported baudrates */
+#define CFG_BAUDRATE_TABLE	\
+	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
+
+/*-----------------------------------------------------------------------
+ * Miscellaneous configurable options
+ *----------------------------------------------------------------------*/
+#define CFG_LONGHELP			/* undef to save memory		*/
+#define CFG_PROMPT	        "=> "	/* Monitor Command Prompt	*/
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE	        1024	/* Console I/O Buffer Size	*/
+#else
+#define CFG_CBSIZE	        256	/* Console I/O Buffer Size	*/
+#endif
+#define CFG_PBSIZE              (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS	        16	/* max number of command args	*/
+#define CFG_BARGSIZE	        CFG_CBSIZE /* Boot Argument Buffer Size	*/
+
+#define CFG_MEMTEST_START	0x0400000 /* memtest works on		*/
+#define CFG_MEMTEST_END		0x0C00000 /* 4 ... 12 MB in DRAM	*/
+
+#define CFG_LOAD_ADDR		0x100000  /* default load address	*/
+#define CFG_EXTBDINFO		1	/* To use extended board_into (bd_t) */
+
+#define CFG_HZ		        1000	/* decrementer freq: 1 ms ticks	*/
+
+#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
+#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
+
+#define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
+#define CONFIG_LOOPW            1       /* enable loopw command         */
+#define CONFIG_MX_CYCLIC        1       /* enable mdc/mwc commands      */
+#define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
+#define CONFIG_VERSION_VARIABLE 1	/* include version env variable */
+
+/*-----------------------------------------------------------------------
+ * I2C
+ *----------------------------------------------------------------------*/
+#define CONFIG_HARD_I2C		1		/* I2C with hardware support	*/
+#undef	CONFIG_SOFT_I2C				/* I2C bit-banged		*/
+#define CFG_I2C_SPEED		400000		/* I2C speed and slave address	*/
+#define CFG_I2C_SLAVE		0x7F
+
+/* these are for the ST M24C02 2kbit serial i2c eeprom */
+#define CFG_I2C_EEPROM_ADDR	0x50		/* base address */
+#define CFG_I2C_EEPROM_ADDR_LEN	1		/* bytes of address */
+/* mask of address bits that overflow into the "EEPROM chip address"    */
+#define CFG_I2C_EEPROM_ADDR_OVERFLOW	0x07
+
+#define CFG_EEPROM_PAGE_WRITE_ENABLE	1	/* write eeprom in pages */
+#define CFG_EEPROM_PAGE_WRITE_BITS	3	/* 8 byte write page size */
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10	/* and takes up to 10 msec */
+
+/*
+ * The layout of the I2C EEPROM, used for bootstrap setup and for board-
+ * specific values, like ethaddr... that can be restored via the sw-reset
+ * button
+ */
+#define FACTORY_RESET_I2C_EEPROM	0x50
+#define FACTORY_RESET_ENV_OFFS		0x80
+#define FACTORY_RESET_ENV_SIZE		0x80
+
+/*-----------------------------------------------------------------------
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ */
+#define CFG_SDRAM_BASE		0x00000000
+#define CFG_FLASH_BASE		0xFF000000
+#define CFG_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Monitor	*/
+#define CFG_MALLOC_LEN		(128 * 1024)	/* Reserve 128 kB for malloc()	*/
+#define CFG_MONITOR_BASE	(-CFG_MONITOR_LEN)
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+
+/*-----------------------------------------------------------------------
+ * FLASH organization
+ */
+#define CFG_FLASH_CFI				/* The flash is CFI compatible	*/
+#define CFG_FLASH_CFI_DRIVER			/* Use common CFI driver	*/
+
+#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE }
+
+#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CFG_MAX_FLASH_SECT	512	/* max number of sectors on one chip	*/
+
+#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+
+#define CFG_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster)	*/
+#define CFG_FLASH_PROTECTION	1	/* use hardware flash protection	*/
+
+#define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
+#define CFG_FLASH_QUIET_TEST	1	/* don't warn upon unknown flash	*/
+
+#ifdef CFG_ENV_IS_IN_FLASH
+#define CFG_ENV_SECT_SIZE	0x20000	/* size of one complete sector		*/
+#define CFG_ENV_ADDR		((-CFG_MONITOR_LEN)-CFG_ENV_SECT_SIZE)
+#define	CFG_ENV_SIZE		0x2000	/* Total Size of Environment Sector	*/
+
+/* Address and size of Redundant Environment Sector	*/
+#define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
+#endif
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_DCACHE_SIZE		16384	/* For IBM 405EP CPU			*/
+#define CFG_CACHELINE_SIZE	32	/* ...			*/
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
+#endif
+
+/*-----------------------------------------------------------------------
+ * Definitions for initial stack pointer and data area (in data cache)
+ */
+/* use on chip memory (OCM) for temperary stack until sdram is tested */
+#define CFG_TEMP_STACK_OCM	1
+
+/* On Chip Memory location */
+#define CFG_OCM_DATA_ADDR	0xF8000000
+#define CFG_OCM_DATA_SIZE	0x1000
+#define CFG_INIT_RAM_ADDR	CFG_OCM_DATA_ADDR /* inside of OCM		*/
+#define CFG_INIT_RAM_END	CFG_OCM_DATA_SIZE /* End of used area in RAM	*/
+
+#define CFG_GBL_DATA_SIZE	128  /* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+/* reserve some memory for POST and BOOT limit info */
+#define CFG_INIT_SP_OFFSET	(CFG_GBL_DATA_OFFSET - 16)
+
+/* extra data in OCM */
+#define CFG_POST_WORD_ADDR	(CFG_GBL_DATA_OFFSET - 4)
+#define CFG_POST_MAGIC		(CFG_OCM_DATA_ADDR + CFG_GBL_DATA_OFFSET - 8)
+#define CFG_POST_VAL		(CFG_OCM_DATA_ADDR + CFG_GBL_DATA_OFFSET - 12)
+
+/*-----------------------------------------------------------------------
+ * External Bus Controller (EBC) Setup
+ */
+
+/* Memory Bank 0 (Flash 16M) initialization					*/
+#define CFG_EBC_PB0AP		0x05815600
+#define CFG_EBC_PB0CR		0xFF09A000  /* BAS=0xFF0,BS=16MB,BU=R/W,BW=16bit  */
+
+/*-----------------------------------------------------------------------
+ * Definitions for GPIO setup (PPC405EP specific)
+ *
+ * GPIO0[0]     - External Bus Controller BLAST output
+ * GPIO0[1-9]   - Instruction trace outputs
+ * GPIO0[10-13] - External Bus Controller CS_1 - CS_4 outputs
+ * GPIO0[14-16] - External Bus Controller ABUS3-ABUS5 outputs
+ * GPIO0[17-23] - External Interrupts IRQ0 - IRQ6 inputs
+ * GPIO0[24-27] - UART0 control signal inputs/outputs
+ * GPIO0[28-29] - UART1 data signal input/output
+ * GPIO0[30-31] - EMAC0 and EMAC1 reject packet inputs
+ */
+#define CFG_GPIO0_OSRH		0x15555550	/* Chip selects */
+#define CFG_GPIO0_OSRL		0x00000110	/* UART_DTR-pin 27 alt out */
+#define CFG_GPIO0_ISR1H		0x10000041	/* Pin 2, 12 is input */
+#define CFG_GPIO0_ISR1L		0x15505440	/* OUT: LEDs 22/23; IN: pin12,2, NVALID# */
+#define CFG_GPIO0_TSRH		0x00000000
+#define CFG_GPIO0_TSRL		0x00000000
+#define CFG_GPIO0_TCR		0xBFF68317	/* 3-state OUT: 22/23/29; 12,2 is not 3-state */
+#define CFG_GPIO0_ODR		0x00000000
+
+#define CFG_GPIO_SW_RESET	1
+#define CFG_GPIO_ZEUS_PE	12
+#define CFG_GPIO_LED_RED	22
+#define CFG_GPIO_LED_GREEN	23
+
+/* Time in milli-seconds */
+#define CFG_TIME_POST		5000
+#define CFG_TIME_FACTORY_RESET	10000
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD		0x01		/* Normal Power-On: Boot from FLASH	*/
+#define BOOTFLAG_WARM		0x02		/* Software reboot			*/
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE	230400		/* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX	2		/* which serial port to use */
+#endif
+
+/* ENVIRONMENT VARS */
+
+#define CONFIG_PREBOOT		"echo;echo Welcome to Bulletendpoints board v1.1;echo"
+#define CONFIG_IPADDR		192.168.1.10
+#define CONFIG_SERVERIP		192.168.1.100
+#define CONFIG_GATEWAYIP	192.168.1.100
+#define CONFIG_ETHADDR		50:00:00:00:06:00
+#define CONFIG_ETH1ADDR		50:00:00:00:06:01
+#if 0
+#define CONFIG_BOOTDELAY	-1	/* autoboot disabled        */
+#else
+#define CONFIG_BOOTDELAY	3	/* autoboot after 5 seconds */
+#endif
+
+#define CONFIG_EXTRA_ENV_SETTINGS					\
+	"logversion=2\0"                                                \
+	"hostname=zeus\0"						\
+	"netdev=eth0\0"							\
+	"ethact=ppc_4xx_eth0\0"						\
+	"netmask=255.255.255.0\0"					\
+	"ramdisk_size=50000\0"						\
+	"nfsargs=setenv bootargs root=/dev/nfs rw"			\
+		" nfsroot=${serverip}:${rootpath}\0"			\
+	"ramargs=setenv bootargs root=/dev/ram rw"			\
+		" ramdisk=${ramdisk_size}\0"				\
+	"addip=setenv bootargs ${bootargs} "				\
+		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
+	        ":${hostname}:${netdev}:off panic=1\0"			\
+	"addtty=setenv bootargs ${bootargs} console=ttyS0,"		\
+		"${baudrate}\0"						\
+	"net_nfs=tftp ${kernel_mem_addr} ${file_kernel};"		\
+		"run nfsargs addip addtty;bootm\0"			\
+	"net_ram=tftp ${kernel_mem_addr} ${file_kernel};"		\
+		"tftp ${ramdisk_mem_addr} ${file_fs};"			\
+		"run ramargs addip addtty;"				\
+		"bootm ${kernel_mem_addr} ${ramdisk_mem_addr}\0"	\
+	"rootpath=/target_fs/zeus\0"					\
+	"kernel_fl_addr=ff000000\0"					\
+	"kernel_mem_addr=200000\0"					\
+	"ramdisk_fl_addr=ff300000\0"					\
+	"ramdisk_mem_addr=4000000\0"					\
+	"uboot_fl_addr=fffc0000\0"					\
+	"uboot_mem_addr=100000\0"					\
+	"file_uboot=/zeus/u-boot.bin\0"					\
+	"tftp_uboot=tftp 100000 ${file_uboot}\0"			\
+	"update_uboot=protect off fffc0000 ffffffff;"			\
+		"era fffc0000 ffffffff;cp.b 100000 fffc0000 40000;"	\
+		"protect on fffc0000 ffffffff\0"			\
+	"upd_uboot=run tftp_uboot;run update_uboot\0"			\
+	"file_kernel=/zeus/uImage_ba\0"					\
+	"tftp_kernel=tftp 100000 ${file_kernel}\0"			\
+	"update_kernel=protect off ff000000 ff17ffff;"			\
+		"era ff000000 ff17ffff;cp.b 100000 ff000000 180000\0"	\
+	"upd_kernel=run tftp_kernel;run update_kernel\0"		\
+	"file_fs=/zeus/rootfs_ba.img\0"					\
+	"tftp_fs=tftp 100000 ${file_fs}\0"				\
+	"update_fs=protect off ff300000 ff87ffff;era ff300000 ff87ffff;"\
+	        "cp.b 100000 ff300000 580000\0"				\
+	"upd_fs=run tftp_fs;run update_fs\0"				\
+	"bootcmd=chkreset;run ramargs addip addtty addmisc;"		\
+		"bootm ${kernel_fl_addr} ${ramdisk_fl_addr}\0"		\
+	""
+
+#endif	/* __CONFIG_H */
diff --git a/include/ppc405.h b/include/ppc405.h
index 8e64731..4fc5283 100644
--- a/include/ppc405.h
+++ b/include/ppc405.h
@@ -541,6 +541,18 @@
 #define PLLMR1_266_66_33_33 (PLL_FBKDIV_8  |  \
 			      PLL_FWDDIVA_3 | PLL_FWDDIVB_3 |  \
 			      PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW)
+#define PLLMR0_333_111_55_37 (PLL_CPUDIV_1 | PLL_PLBDIV_3 |  \
+			      PLL_OPBDIV_2 | PLL_EXTBUSDIV_2 |  \
+			      PLL_MALDIV_1 | PLL_PCIDIV_3)
+#define PLLMR1_333_111_55_37 (PLL_FBKDIV_10  |  \
+			      PLL_FWDDIVA_3 | PLL_FWDDIVB_3 |  \
+			      PLL_TUNE_15_M_40 | PLL_TUNE_VCO_HI)
+#define PLLMR0_333_111_55_111 (PLL_CPUDIV_1 | PLL_PLBDIV_3 |  \
+			      PLL_OPBDIV_2 | PLL_EXTBUSDIV_2 |  \
+			      PLL_MALDIV_1 | PLL_PCIDIV_1)
+#define PLLMR1_333_111_55_111 (PLL_FBKDIV_10  |  \
+			      PLL_FWDDIVA_3 | PLL_FWDDIVB_3 |  \
+			      PLL_TUNE_15_M_40 | PLL_TUNE_VCO_HI)
 
 /*
  * PLL Voltage Controlled Oscillator (VCO) definitions
@@ -1226,6 +1238,8 @@
 #define mtebc(reg, data)  mtdcr(ebccfga,reg);mtdcr(ebccfgd,data)
 #define mfebc(reg, data)  mtdcr(ebccfga,reg);data = mfdcr(ebccfgd)
 
+#define mtsdram(reg, data)	do { mtdcr(memcfga,reg);mtdcr(memcfgd,data); } while (0)
+#define mfsdram(reg, data)	do { mtdcr(memcfga,reg);data = mfdcr(memcfgd); } while (0)
 
 #ifndef __ASSEMBLY__