* Patch by Yuli Barcohen, 26 Jan 2004:

  Allow bzip2 compression for small memory footprint boards

* Patch by Brad Kemp, 21 Jan 2004:
  Add support for CFI flash driver for both the Intel and the AMD
  command sets.

* Patch by Travis Sawyer, 20 Jan 2004:
  Fix pci bridge auto enumeration of sibling p2p bridges.

* Patch by Tolunay Orkun, 12 Jan 2004:
  Add some delays as needed for Intel LXT971A PHY support

* Patches by Stephan Linz, 09 Jan 2004:
  - avoid warning: unused variable `piop' in board/altera/common/sevenseg.c
  - make DK1C20 board configuration related to ASMI conform to
    documentation

11 files changed, 1084 insertions, 15 deletions

diff --git a/CHANGELOG b/CHANGELOG
index 202dd47..2359b48 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,24 @@
 Changes since U-Boot 1.0.1:
 ======================================================================
 
+* Patch by Yuli Barcohen, 26 Jan 2004:
+  Allow bzip2 compression for small memory footprint boards
+
+* Patch by Brad Kemp, 21 Jan 2004:
+  Add support for CFI flash driver for both the Intel and the AMD
+  command sets.
+
+* Patch by Travis Sawyer, 20 Jan 2004:
+  Fix pci bridge auto enumeration of sibling p2p bridges.
+
+* Patch by Tolunay Orkun, 12 Jan 2004:
+  Add some delays as needed for Intel LXT971A PHY support
+
+* Patches by Stephan Linz, 09 Jan 2004:
+  - avoid warning: unused variable `piop' in board/altera/common/sevenseg.c
+  - make DK1C20 board configuration related to ASMI conform to
+    documentation
+
 * Patch by Anders Larsen, 09 Jan 2004:
 
   ARM memory layout fixes: the abort-stack is now set up in the
diff --git a/README b/README
index 46171bf..ac5b921 100644
--- a/README
+++ b/README
@@ -1643,7 +1643,11 @@ Configuration Settings:
 
 - CFG_FLASH_CFI:
 		Define if the flash driver uses extra elements in the
-		common flash structure for storing flash geometry
+		common flash structure for storing flash geometry.
+
+- CFG_FLASH_CFI_DRIVER
+		This option also enables the building of the cfi_flash driver
+		in the drivers directory
 
 - CFG_RX_ETH_BUFFER:
 		Defines the number of ethernet receive buffers. On some
diff --git a/board/altera/common/sevenseg.c b/board/altera/common/sevenseg.c
index fecfbd3..c53cec1 100644
--- a/board/altera/common/sevenseg.c
+++ b/board/altera/common/sevenseg.c
@@ -44,7 +44,7 @@ static int sevenseg_init_done = 0;
 
 static inline void __sevenseg_set_masked (unsigned int mask, int value)
 {
-	nios_pio_t *piop = (nios_pio_t*)SEVENSEG_BASE;
+	nios_pio_t *piop __attribute__((unused)) = (nios_pio_t*)SEVENSEG_BASE;
 
 #ifdef	SEVENSEG_WRONLY	/* emulate read access */
 
@@ -97,7 +97,7 @@ static inline void __sevenseg_toggle_masked (unsigned int mask)
 
 static inline void __sevenseg_set (unsigned int value)
 {
-	nios_pio_t *piop = (nios_pio_t*)SEVENSEG_BASE;
+	nios_pio_t *piop __attribute__((unused)) = (nios_pio_t*)SEVENSEG_BASE;
 
 #ifdef	SEVENSEG_WRONLY	/* emulate read access */
 
@@ -126,7 +126,7 @@ static inline void __sevenseg_set (unsigned int value)
 
 static inline void __sevenseg_init (void)
 {
-	nios_pio_t *piop = (nios_pio_t*)SEVENSEG_BASE;
+	nios_pio_t *piop __attribute__((unused)) = (nios_pio_t*)SEVENSEG_BASE;
 
 	__sevenseg_set(0);
 
diff --git a/common/cmd_bootm.c b/common/cmd_bootm.c
index 34a74ce..ac9c32e 100644
--- a/common/cmd_bootm.c
+++ b/common/cmd_bootm.c
@@ -333,8 +333,14 @@ int do_bootm (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 #ifdef CONFIG_BZIP2
 	case IH_COMP_BZIP2:
 		printf ("   Uncompressing %s ... ", name);
+		/*
+		 * If we've got less than 4 MB of malloc() space,
+		 * use slower decompression algorithm which requires
+		 * at most 2300 KB of memory.
+		 */
 		i = BZ2_bzBuffToBuffDecompress ((char*)ntohl(hdr->ih_load),
-						&unc_len, (char *)data, len, 0, 0);
+						&unc_len, (char *)data, len,
+						CFG_MALLOC_LEN < (4096 * 1024), 0);
 		if (i != BZ_OK) {
 			printf ("BUNZIP2 ERROR %d - must RESET board to recover\n", i);
 			SHOW_BOOT_PROGRESS (-6);
diff --git a/common/miiphyutil.c b/common/miiphyutil.c
index af8c7c7..03964da 100644
--- a/common/miiphyutil.c
+++ b/common/miiphyutil.c
@@ -99,7 +99,9 @@ int miiphy_reset (unsigned char addr)
 #endif
 		return (-1);
 	}
-
+#ifdef CONFIG_PHY_RESET_DELAY
+	udelay (CONFIG_PHY_RESET_DELAY);	/* Intel LXT971A needs this */
+#endif
 	/*
 	 * Poll the control register for the reset bit to go to 0 (it is
 	 * auto-clearing).  This should happen within 0.5 seconds per the
diff --git a/cpu/ppc4xx/miiphy.c b/cpu/ppc4xx/miiphy.c
index 5ca6681..3d343ee 100644
--- a/cpu/ppc4xx/miiphy.c
+++ b/cpu/ppc4xx/miiphy.c
@@ -113,6 +113,9 @@ int miiphy_read (unsigned char addr, unsigned char reg,
 	printf ("a2: write: EMAC_STACR=0x%0x\n", sta_reg);	/* test-only */
 #endif
 
+#ifdef CONFIG_PHY_CMD_DELAY
+	udelay (CONFIG_PHY_CMD_DELAY);		/* Intel LXT971A needs this */
+#endif
 	sta_reg = in32 (EMAC_STACR);
 	i = 0;
 	while ((sta_reg & EMAC_STACR_OC) == 0) {
@@ -173,6 +176,9 @@ int miiphy_write (unsigned char addr, unsigned char reg,
 
 	out32 (EMAC_STACR, sta_reg);
 
+#ifdef CONFIG_PHY_CMD_DELAY
+	udelay (CONFIG_PHY_CMD_DELAY);		/* Intel LXT971A needs this */
+#endif
 	/* wait for completion */
 	i = 0;
 	sta_reg = in32 (EMAC_STACR);
diff --git a/drivers/Makefile b/drivers/Makefile
index 2bdabae..2999eb4 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -28,7 +28,7 @@ include $(TOPDIR)/config.mk
 LIB	= libdrivers.a
 
 OBJS	= 3c589.o 5701rls.o ali512x.o \
-	  bcm570x.o bcm570x_autoneg.o cfb_console.o \
+	  bcm570x.o bcm570x_autoneg.o cfb_console.o cfi_flash.o \
 	  cs8900.o ct69000.o dataflash.o dc2114x.o          \
 	  e1000.o eepro100.o \
 	  i8042.o i82365.o inca-ip_sw.o \
diff --git a/drivers/cfi_flash.c b/drivers/cfi_flash.c
new file mode 100644
index 0000000..fb76925
--- /dev/null
+++ b/drivers/cfi_flash.c
@@ -0,0 +1,1018 @@
+/*
+ * (C) Copyright 2002
+ * Brad Kemp, Seranoa Networks, Brad.Kemp@seranoa.com
+ *
+ * Copyright (C) 2003 Arabella Software Ltd.
+ * Yuli Barcohen <yuli@arabellasw.com>
+ * Modified to work with AMD flashes
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * History
+ * 01/20/2004 - combined variants of original driver.
+ *
+ * Tested Architectures
+ * Port Width  Chip Width    # of banks    Flash Chip  Board
+ * 32          16            1             23F128J3    seranoa/eagle
+ * 
+ */
+
+/* The DEBUG define must be before common to enable debugging */
+#undef  DEBUG 
+#include <common.h>
+#include <asm/processor.h>
+#ifdef  CFG_FLASH_CFI_DRIVER
+/*
+ * This file implements a Common Flash Interface (CFI) driver for U-Boot.
+ * The width of the port and the width of the chips are determined at initialization.
+ * These widths are used to calculate the address for access CFI data structures.
+ * It has been tested on an Intel Strataflash implementation and AMD 29F016D.
+ *
+ * References
+ * JEDEC Standard JESD68 - Common Flash Interface (CFI)
+ * JEDEC Standard JEP137-A Common Flash Interface (CFI) ID Codes
+ * Intel Application Note 646 Common Flash Interface (CFI) and Command Sets
+ * Intel 290667-008 3 Volt Intel StrataFlash Memory datasheet
+ *
+ * TODO
+ *
+ * Use Primary Extended Query table (PRI) and Alternate Algorithm Query
+ * Table (ALT) to determine if protection is available
+ *
+ * Add support for other command sets Use the PRI and ALT to determine command set
+ * Verify erase and program timeouts.
+ */
+
+#define FLASH_CMD_CFI			0x98
+#define FLASH_CMD_READ_ID		0x90
+#define FLASH_CMD_RESET			0xff
+#define FLASH_CMD_BLOCK_ERASE		0x20
+#define FLASH_CMD_ERASE_CONFIRM		0xD0
+#define FLASH_CMD_WRITE			0x40
+#define FLASH_CMD_PROTECT		0x60
+#define FLASH_CMD_PROTECT_SET		0x01
+#define FLASH_CMD_PROTECT_CLEAR		0xD0
+#define FLASH_CMD_CLEAR_STATUS		0x50
+#define FLASH_CMD_WRITE_TO_BUFFER       0xE8
+#define FLASH_CMD_WRITE_BUFFER_CONFIRM  0xD0
+
+#define FLASH_STATUS_DONE		0x80
+#define FLASH_STATUS_ESS		0x40
+#define FLASH_STATUS_ECLBS		0x20
+#define FLASH_STATUS_PSLBS		0x10
+#define FLASH_STATUS_VPENS		0x08
+#define FLASH_STATUS_PSS		0x04
+#define FLASH_STATUS_DPS		0x02
+#define FLASH_STATUS_R			0x01
+#define FLASH_STATUS_PROTECT		0x01
+
+#define AMD_CMD_RESET			0xF0
+#define AMD_CMD_WRITE			0xA0
+#define AMD_CMD_ERASE_START		0x80
+#define AMD_CMD_ERASE_SECTOR		0x30
+
+#define AMD_STATUS_TOGGLE		0x40
+#define AMD_STATUS_ERROR		0x20
+
+#define FLASH_OFFSET_CFI		0x55
+#define FLASH_OFFSET_CFI_RESP		0x10
+#define FLASH_OFFSET_PRIMARY_VENDOR     0x13
+#define FLASH_OFFSET_WTOUT		0x1F
+#define FLASH_OFFSET_WBTOUT             0x20
+#define FLASH_OFFSET_ETOUT		0x21
+#define FLASH_OFFSET_CETOUT             0x22
+#define FLASH_OFFSET_WMAX_TOUT		0x23
+#define FLASH_OFFSET_WBMAX_TOUT         0x24
+#define FLASH_OFFSET_EMAX_TOUT		0x25
+#define FLASH_OFFSET_CEMAX_TOUT         0x26
+#define FLASH_OFFSET_SIZE		0x27
+#define FLASH_OFFSET_INTERFACE          0x28
+#define FLASH_OFFSET_BUFFER_SIZE        0x2A
+#define FLASH_OFFSET_NUM_ERASE_REGIONS	0x2C
+#define FLASH_OFFSET_ERASE_REGIONS	0x2D
+#define FLASH_OFFSET_PROTECT		0x02
+#define FLASH_OFFSET_USER_PROTECTION    0x85
+#define FLASH_OFFSET_INTEL_PROTECTION   0x81
+
+
+#define FLASH_MAN_CFI			0x01000000
+
+#define CFI_CMDSET_NONE             0
+#define CFI_CMDSET_INTEL_EXTENDED   1
+#define CFI_CMDSET_AMD_STANDARD     2
+#define CFI_CMDSET_INTEL_STANDARD   3
+#define CFI_CMDSET_AMD_EXTENDED     4
+#define CFI_CMDSET_MITSU_STANDARD   256
+#define CFI_CMDSET_MITSU_EXTENDED   257
+#define CFI_CMDSET_SST              258
+
+
+typedef union {
+	unsigned char c;
+	unsigned short w;
+	unsigned long l;
+	unsigned long long ll;
+} cfiword_t;
+
+typedef union {
+	volatile unsigned char  *cp;
+	volatile unsigned short *wp;
+	volatile unsigned long  *lp;
+	volatile unsigned long long *llp;
+} cfiptr_t;
+
+#define NUM_ERASE_REGIONS 4
+
+static ulong bank_base[CFG_MAX_FLASH_BANKS] = CFG_FLASH_BANKS_LIST;
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+
+typedef unsigned long flash_sect_t;
+
+static void flash_add_byte(flash_info_t *info, cfiword_t * cword, uchar c);
+static void flash_make_cmd(flash_info_t * info, uchar cmd, void * cmdbuf);
+static void flash_write_cmd(flash_info_t * info, flash_sect_t sect, uint offset, uchar cmd);
+static void flash_unlock_seq(flash_info_t *info);
+static int flash_isequal(flash_info_t * info, flash_sect_t sect, uint offset, uchar cmd);
+static int flash_isset(flash_info_t * info, flash_sect_t sect, uint offset, uchar cmd);
+static int flash_toggle(flash_info_t * info, flash_sect_t sect, uint offset, uchar cmd);
+static int flash_detect_cfi(flash_info_t * info);
+static ulong flash_get_size (ulong base, int banknum);
+static int flash_write_cfiword (flash_info_t *info, ulong dest, cfiword_t cword);
+static int flash_full_status_check(flash_info_t * info, flash_sect_t sector, ulong tout, char * prompt);
+#ifdef CFG_FLASH_USE_BUFFER_WRITE
+static int flash_write_cfibuffer(flash_info_t * info, ulong dest, uchar * cp, int len);
+#endif
+
+#ifdef DEBUG
+void print_longlong(char * str, unsigned long long data)
+{
+	int i;
+	char *cp;
+	cp = (unsigned char *)&data;
+	for(i=0;i<8; i++) 
+		sprintf(&str[i*2], "%2.2x", *cp++);  
+}
+#endif
+
+
+/*-----------------------------------------------------------------------
+ * create an address based on the offset and the port width
+ */
+inline uchar * flash_make_addr(flash_info_t * info, flash_sect_t sect, uint offset)
+{
+	return ((uchar *)(info->start[sect] + (offset * info->portwidth)));
+}
+/*-----------------------------------------------------------------------
+ * read a character at a port width address
+ */
+inline uchar flash_read_uchar(flash_info_t * info, uint offset)
+{
+	uchar *cp;
+	cp = flash_make_addr(info, 0, offset);
+	return (cp[info->portwidth - 1]);
+}
+
+/*-----------------------------------------------------------------------
+ * read a short word by swapping for ppc format.
+ */
+ushort flash_read_ushort(flash_info_t * info, flash_sect_t sect,  uint offset)
+{
+    uchar * addr;
+
+    addr = flash_make_addr(info, sect, offset);
+    return ((addr[(2*info->portwidth) - 1] << 8) | addr[info->portwidth - 1]);
+
+}
+
+/*-----------------------------------------------------------------------
+ * read a long word by picking the least significant byte of each maiximum
+ * port size word. Swap for ppc format.
+ */
+ulong flash_read_long(flash_info_t * info, flash_sect_t sect,  uint offset)
+{
+    uchar * addr;
+
+    addr = flash_make_addr(info, sect, offset);
+    return ( (addr[(2*info->portwidth) - 1] << 24 ) | (addr[(info->portwidth) -1] << 16) |
+	    (addr[(4*info->portwidth) - 1] << 8) | addr[(3*info->portwidth) - 1]);
+
+}
+
+/*-----------------------------------------------------------------------
+ */
+unsigned long flash_init (void)
+{
+	unsigned long size = 0;
+	int i;
+
+	/* Init: no FLASHes known */
+	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+		flash_info[i].flash_id = FLASH_UNKNOWN;
+		size += flash_info[i].size = flash_get_size(bank_base[i], i);
+		if (flash_info[i].flash_id == FLASH_UNKNOWN) {
+			printf ("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n",
+				i, flash_info[i].size, flash_info[i].size << 20);
+		}
+	}
+
+	/* Monitor protection ON by default */
+#if (CFG_MONITOR_BASE >= CFG_FLASH_BASE)
+	flash_protect(FLAG_PROTECT_SET,
+		      CFG_MONITOR_BASE,
+		      CFG_MONITOR_BASE + monitor_flash_len - 1,
+		      &flash_info[0]);
+#endif
+
+	return (size);
+}
+
+/*-----------------------------------------------------------------------
+ */
+int flash_erase (flash_info_t *info, int s_first, int s_last)
+{
+	int rcode = 0;
+	int prot;
+	flash_sect_t sect;
+
+	if( info->flash_id != FLASH_MAN_CFI) {
+		printf ("Can't erase unknown flash type - aborted\n");
+		return 1;
+	}
+	if ((s_first < 0) || (s_first > s_last)) {
+		printf ("- no sectors to erase\n");
+		return 1;
+	}
+
+	prot = 0;
+	for (sect=s_first; sect<=s_last; ++sect) {
+		if (info->protect[sect]) {
+			prot++;
+		}
+	}
+	if (prot) {
+		printf ("- Warning: %d protected sectors will not be erased!\n",
+			prot);
+	} else {
+		printf ("\n");
+	}
+
+
+	for (sect = s_first; sect<=s_last; sect++) {
+		if (info->protect[sect] == 0) { /* not protected */
+			switch(info->vendor) {
+			case CFI_CMDSET_INTEL_STANDARD:
+			case CFI_CMDSET_INTEL_EXTENDED:
+				flash_write_cmd(info, sect, 0, FLASH_CMD_CLEAR_STATUS);
+				flash_write_cmd(info, sect, 0, FLASH_CMD_BLOCK_ERASE);
+				flash_write_cmd(info, sect, 0, FLASH_CMD_ERASE_CONFIRM);
+				break;
+			case CFI_CMDSET_AMD_STANDARD:
+			case CFI_CMDSET_AMD_EXTENDED:
+				flash_unlock_seq(info);
+				flash_write_cmd(info, sect, 0x555, AMD_CMD_ERASE_START);
+				flash_unlock_seq(info);
+				flash_write_cmd(info, sect, 0, AMD_CMD_ERASE_SECTOR);
+				break;
+			default:
+				debug("Unkown flash vendor %d\n", info->vendor);
+				break;
+			}
+
+			if(flash_full_status_check(info, sect, info->erase_blk_tout, "erase")) {
+				rcode = 1;
+			} else
+				printf(".");
+		}
+	}
+	printf (" done\n");
+	return rcode;
+}
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info  (flash_info_t *info)
+{
+	int i;
+
+	if (info->flash_id != FLASH_MAN_CFI) {
+		printf ("missing or unknown FLASH type\n");
+		return;
+	}
+
+	printf("CFI conformant FLASH (%d x %d)",
+	       (info->portwidth	 << 3 ), (info->chipwidth  << 3 ));
+	printf ("  Size: %ld MB in %d Sectors\n",
+		info->size >> 20, info->sector_count);
+	printf(" Erase timeout %ld ms, write timeout %ld ms, buffer write timeout %ld ms, buffer size %d\n",
+	       info->erase_blk_tout, info->write_tout, info->buffer_write_tout, info->buffer_size);
+
+	printf ("  Sector Start Addresses:");
+	for (i=0; i<info->sector_count; ++i) {
+#ifdef CFG_FLASH_EMPTY_INFO
+		int k;
+		int size;
+		int erased;
+		volatile unsigned long *flash;
+
+		/*
+		 * Check if whole sector is erased
+		 */
+		if (i != (info->sector_count-1))
+		  size = info->start[i+1] - info->start[i];
+		else
+		  size = info->start[0] + info->size - info->start[i];
+		erased = 1;
+		flash = (volatile unsigned long *)info->start[i];
+		size = size >> 2;        /* divide by 4 for longword access */
+		for (k=0; k<size; k++)
+		  {
+		    if (*flash++ != 0xffffffff)
+		      {
+			erased = 0;
+			break;
+		      }
+		  }
+
+		if ((i % 5) == 0)
+			printf ("\n");
+		/* print empty and read-only info */
+		printf (" %08lX%s%s",
+			info->start[i],
+			erased ? " E" : "  ",
+			info->protect[i] ? "RO " : "   ");
+#else
+		if ((i % 5) == 0)
+			printf ("\n   ");
+		printf (" %08lX%s",
+			info->start[i],
+			info->protect[i] ? " (RO)" : "     ");
+#endif
+	}
+	printf ("\n");
+	return;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+{
+	ulong wp;
+	ulong cp;
+	int aln;
+	cfiword_t cword;
+	int i, rc;
+
+	/* get lower aligned address */
+	wp = (addr & ~(info->portwidth - 1));
+
+	/* handle unaligned start */
+	if((aln = addr - wp) != 0) {
+		cword.l = 0;
+		cp = wp;
+		for(i=0;i<aln; ++i, ++cp)
+			flash_add_byte(info, &cword, (*(uchar *)cp));
+
+		for(; (i< info->portwidth) && (cnt > 0) ; i++) {
+			flash_add_byte(info, &cword, *src++);
+			cnt--;
+			cp++;
+		}
+		for(; (cnt == 0) && (i < info->portwidth); ++i, ++cp)
+			flash_add_byte(info, &cword, (*(uchar *)cp));
+		if((rc = flash_write_cfiword(info, wp, cword)) != 0)
+			return rc;
+		wp = cp;
+	}
+
+#ifdef CFG_FLASH_USE_BUFFER_WRITE
+	while(cnt >= info->portwidth) {
+		i = info->buffer_size > cnt? cnt: info->buffer_size;
+		if((rc = flash_write_cfibuffer(info, wp, src,i)) != ERR_OK)
+			return rc;
+		wp += i;
+		src += i;
+		cnt -=i;
+	}
+#else
+	/* handle the aligned part */
+	while(cnt >= info->portwidth) {
+		cword.l = 0;
+		for(i = 0; i < info->portwidth; i++) {
+			flash_add_byte(info, &cword, *src++);
+		}
+		if((rc = flash_write_cfiword(info, wp, cword)) != 0)
+			return rc;
+		wp += info->portwidth;
+		cnt -= info->portwidth;
+	}
+#endif /* CFG_FLASH_USE_BUFFER_WRITE */
+	if (cnt == 0) {
+		return (0);
+	}
+
+	/*
+	 * handle unaligned tail bytes
+	 */
+	cword.l = 0;
+	for (i=0, cp=wp; (i<info->portwidth) && (cnt>0); ++i, ++cp) {
+		flash_add_byte(info, &cword, *src++);
+		--cnt;
+	}
+	for (; i<info->portwidth; ++i, ++cp) {
+		flash_add_byte(info, & cword, (*(uchar *)cp));
+	}
+
+	return flash_write_cfiword(info, wp, cword);
+}
+
+/*-----------------------------------------------------------------------
+ */
+#ifdef CFG_FLASH_PROTECTION
+
+int flash_real_protect(flash_info_t *info, long sector, int prot)
+{
+	int retcode = 0;
+
+	flash_write_cmd(info, sector, 0, FLASH_CMD_CLEAR_STATUS);
+	flash_write_cmd(info, sector, 0, FLASH_CMD_PROTECT);
+	if(prot)
+		flash_write_cmd(info, sector, 0, FLASH_CMD_PROTECT_SET);
+	else
+		flash_write_cmd(info, sector, 0, FLASH_CMD_PROTECT_CLEAR);
+
+	if((retcode = flash_full_status_check(info, sector, info->erase_blk_tout,
+					 prot?"protect":"unprotect")) == 0) {
+
+		info->protect[sector] = prot;
+		/* Intel's unprotect unprotects all locking */
+		if(prot == 0) {
+			flash_sect_t i;
+			for(i = 0 ; i<info->sector_count; i++) {
+				if(info->protect[i])
+					flash_real_protect(info, i, 1);
+			}
+		}
+	}
+
+	return retcode;
+ }
+/*-----------------------------------------------------------------------
+ * flash_read_user_serial - read the OneTimeProgramming cells
+ */
+void flash_read_user_serial(flash_info_t * info, void * buffer, int offset, int len)
+{
+	uchar * src;
+	uchar * dst;
+
+	dst = buffer;
+	src = flash_make_addr(info, 0, FLASH_OFFSET_USER_PROTECTION);
+	flash_write_cmd(info,0, 0, FLASH_CMD_READ_ID);
+	memcpy(dst,src + offset,len);
+	flash_write_cmd(info, 0, 0, FLASH_CMD_RESET);
+}
+/*
+ * flash_read_factory_serial - read the device Id from the protection area
+ */
+void flash_read_factory_serial(flash_info_t * info, void * buffer, int offset, int len)
+{
+	uchar * src;
+	
+	src = flash_make_addr(info, 0, FLASH_OFFSET_INTEL_PROTECTION);
+	flash_write_cmd(info,0, 0, FLASH_CMD_READ_ID);
+	memcpy(buffer,src + offset,len);
+	flash_write_cmd(info, 0, 0, FLASH_CMD_RESET);
+}
+
+#endif /* CFG_FLASH_PROTECTION */
+
+static int flash_poll_status(flash_info_t * info, flash_sect_t sect) 
+{
+	int retval;
+	switch(info->vendor) {
+	case CFI_CMDSET_INTEL_STANDARD:
+	case CFI_CMDSET_INTEL_EXTENDED:
+		retval = !flash_isset(info, sect, 0, FLASH_STATUS_DONE);
+		break;
+	case CFI_CMDSET_AMD_STANDARD:
+	case CFI_CMDSET_AMD_EXTENDED:
+		retval =  flash_toggle(info, sect, 0, AMD_STATUS_TOGGLE);
+		break;
+	default:
+		retval = 0;
+	}
+	return retval;
+}
+/*-----------------------------------------------------------------------
+ *  wait for XSR.7 to be set. Time out with an error if it does not.
+ *  This routine does not set the flash to read-array mode.
+ */
+static int flash_status_check(flash_info_t * info, flash_sect_t sector, ulong tout, char * prompt)
+{
+	ulong start;
+
+	/* Wait for command completion */
+	start = get_timer (0);
+	while (flash_poll_status(info, sector)) {
+		if (get_timer(start) > info->erase_blk_tout) {
+			printf("Flash %s timeout at address %lx\n", prompt, info->start[sector]);
+			flash_write_cmd(info, sector, 0, info->cmd_reset);
+			return ERR_TIMOUT;
+		}
+	}
+	return ERR_OK;
+}
+/*-----------------------------------------------------------------------
+ * Wait for XSR.7 to be set, if it times out print an error, otherwise do a full status check.
+ * This routine sets the flash to read-array mode.
+ */
+static int flash_full_status_check(flash_info_t * info, flash_sect_t sector, ulong tout, char * prompt)
+{
+	int retcode;
+	retcode = flash_status_check(info, sector, tout, prompt);
+	switch(info->vendor) {
+	case CFI_CMDSET_INTEL_EXTENDED:
+	case CFI_CMDSET_INTEL_STANDARD:
+		if((retcode == ERR_OK) && !flash_isequal(info,sector, 0, FLASH_STATUS_DONE)) {
+			retcode = ERR_INVAL;
+			printf("Flash %s error at address %lx\n", prompt,info->start[sector]);
+			if(flash_isset(info, sector, 0, FLASH_STATUS_ECLBS | FLASH_STATUS_PSLBS)){
+				printf("Command Sequence Error.\n");
+			} else if(flash_isset(info, sector, 0, FLASH_STATUS_ECLBS)){
+				printf("Block Erase Error.\n");
+				retcode = ERR_NOT_ERASED;
+			} else if (flash_isset(info, sector, 0, FLASH_STATUS_PSLBS)) {
+				printf("Locking Error\n");
+			}
+		if(flash_isset(info, sector, 0, FLASH_STATUS_DPS)){
+			printf("Block locked.\n");
+			retcode = ERR_PROTECTED;
+		}
+		if(flash_isset(info, sector, 0, FLASH_STATUS_VPENS))
+			printf("Vpp Low Error.\n");
+		}
+		flash_write_cmd(info, sector, 0, FLASH_CMD_RESET);
+		break;
+	default:
+		break;
+	}
+	return retcode;
+}
+/*-----------------------------------------------------------------------
+ */
+static void flash_add_byte(flash_info_t *info, cfiword_t * cword, uchar c)
+{
+	switch(info->portwidth) {
+	case FLASH_CFI_8BIT:
+		cword->c = c;
+		break;
+	case FLASH_CFI_16BIT:
+		cword->w = (cword->w << 8) | c;
+		break;
+	case FLASH_CFI_32BIT:
+		cword->l = (cword->l << 8) | c;
+		break;
+	case FLASH_CFI_64BIT:
+		cword->ll = (cword->ll << 8) | c;
+		break;
+	}
+}
+
+
+/*-----------------------------------------------------------------------
+ * make a proper sized command based on the port and chip widths
+ */
+static void flash_make_cmd(flash_info_t * info, uchar cmd, void * cmdbuf)
+{
+	int i;
+	uchar *cp = (uchar *)cmdbuf;
+	for(i=0; i< info->portwidth; i++)
+		*cp++ = ((i+1) % info->chipwidth) ? '\0':cmd;
+}
+
+/*
+ * Write a proper sized command to the correct address
+ */
+static void flash_write_cmd(flash_info_t * info, flash_sect_t sect, uint offset, uchar cmd)
+{
+
+	volatile cfiptr_t addr;
+	cfiword_t cword;
+	addr.cp = flash_make_addr(info, sect, offset);
+	flash_make_cmd(info, cmd, &cword);
+	switch(info->portwidth) {
+	case FLASH_CFI_8BIT:
+		debug("fwc addr %p cmd %x %x 8bit x %d bit\n",addr.cp, cmd, cword.c, 
+		       info->chipwidth << CFI_FLASH_SHIFT_WIDTH);
+		*addr.cp = cword.c;
+		break;
+	case FLASH_CFI_16BIT:
+		debug("fwc addr %p cmd %x %4.4x 16bit x %d bit\n",addr.wp, cmd, cword.w, 
+		       info->chipwidth << CFI_FLASH_SHIFT_WIDTH);
+		*addr.wp = cword.w;
+		break;
+	case FLASH_CFI_32BIT:
+		debug("fwc addr %p cmd %x %8.8lx 32bit x %d bit\n",addr.lp, cmd, cword.l, 
+		       info->chipwidth << CFI_FLASH_SHIFT_WIDTH);
+		*addr.lp = cword.l;
+		break;
+	case FLASH_CFI_64BIT:
+#ifdef DEBUG
+	        { 
+			char str[20];
+			print_longlong(str, cword.ll);
+	
+			printf("fwc addr %p cmd %x %s 64 bit x %d bit\n",addr.llp, cmd, str, 
+			       info->chipwidth << CFI_FLASH_SHIFT_WIDTH);
+		}
+#endif
+		*addr.llp = cword.ll;
+		break;
+	}
+}
+
+static void flash_unlock_seq(flash_info_t *info)
+{
+	flash_write_cmd(info, 0, 0x555, 0xAA);
+	flash_write_cmd(info, 0, 0x2AA, 0x55);
+}
+/*-----------------------------------------------------------------------
+ */
+static int flash_isequal(flash_info_t * info, flash_sect_t sect, uint offset, uchar cmd)
+{
+	cfiptr_t cptr;
+	cfiword_t cword;
+	int retval;
+	cptr.cp = flash_make_addr(info, sect, offset);
+	flash_make_cmd(info, cmd, &cword);
+
+	debug("is= cmd %x(%c) addr %p ", cmd,cmd, cptr.cp);
+	switch(info->portwidth) {
+	case FLASH_CFI_8BIT:
+		debug("is= %x %x\n", cptr.cp[0], cword.c);
+		retval = (cptr.cp[0] == cword.c);
+		break;
+	case FLASH_CFI_16BIT:
+		debug("is= %4.4x %4.4x\n", cptr.wp[0], cword.w);
+		retval = (cptr.wp[0] == cword.w);
+		break;
+	case FLASH_CFI_32BIT:
+		debug("is= %8.8lx %8.8lx\n", cptr.lp[0], cword.l);
+		retval = (cptr.lp[0] == cword.l);
+		break;
+	case FLASH_CFI_64BIT:
+#ifdef DEBUG		
+	        {
+			char str1[20];
+			char str2[20];
+			print_longlong(str1, cptr.llp[0]);
+			print_longlong(str2, cword.ll);
+			printf("is= %s %s\n", str1, str2);
+		}
+#endif
+		retval = (cptr.llp[0] == cword.ll);
+		break;
+	default:
+		retval = 0;
+		break;
+	}
+	return retval;
+}
+/*-----------------------------------------------------------------------
+ */
+static int flash_isset(flash_info_t * info, flash_sect_t sect, uint offset, uchar cmd)
+{
+	cfiptr_t cptr;
+	cfiword_t cword;
+	int retval;
+	cptr.cp = flash_make_addr(info, sect, offset);
+	flash_make_cmd(info, cmd, &cword);
+	switch(info->portwidth) {
+	case FLASH_CFI_8BIT:
+		retval = ((cptr.cp[0] & cword.c) == cword.c);
+		break;
+	case FLASH_CFI_16BIT:
+		retval = ((cptr.wp[0] & cword.w) == cword.w);
+		break;
+	case FLASH_CFI_32BIT:
+		retval = ((cptr.lp[0] & cword.l) == cword.l);
+		break;
+	case FLASH_CFI_64BIT:
+		retval = ((cptr.llp[0] & cword.ll) == cword.ll);
+	default:
+		retval = 0;
+		break;
+	}
+	return retval;
+}
+
+/*-----------------------------------------------------------------------
+ */
+static int flash_toggle(flash_info_t * info, flash_sect_t sect, uint offset, uchar cmd)
+{
+	cfiptr_t cptr;
+	cfiword_t cword;
+	int retval;
+	cptr.cp = flash_make_addr(info, sect, offset);
+	flash_make_cmd(info, cmd, &cword);
+	switch(info->portwidth) {
+	case FLASH_CFI_8BIT:
+		retval = ((cptr.cp[0] & cword.c) != (cptr.cp[0] & cword.c));
+		break;
+	case FLASH_CFI_16BIT:
+		retval = ((cptr.wp[0] & cword.w) != (cptr.wp[0] & cword.w));
+		break;
+	case FLASH_CFI_32BIT:
+		retval = ((cptr.lp[0] & cword.l) != (cptr.lp[0] & cword.l));
+		break;
+	case FLASH_CFI_64BIT:
+		retval = ((cptr.llp[0] & cword.ll) != (cptr.llp[0] & cword.ll));
+		break;
+	default:
+		retval = 0;
+		break;
+	}
+	return retval;
+}
+
+/*-----------------------------------------------------------------------
+ * detect if flash is compatible with the Common Flash Interface (CFI)
+ * http://www.jedec.org/download/search/jesd68.pdf
+ *
+*/
+static int flash_detect_cfi(flash_info_t * info)
+{
+
+    puts("flash detect cfi\n");
+
+	for(info->portwidth=FLASH_CFI_8BIT; info->portwidth <= FLASH_CFI_64BIT;
+	    info->portwidth <<= 1) {
+	  /*		for(info->chipwidth = info->portwidth;
+			info->chipwidth > 0;
+			info->chipwidth >>= 1) { */
+		for(info->chipwidth =FLASH_CFI_BY8;
+		    info->chipwidth <= info->portwidth;
+		    info->chipwidth <<= 1) { 
+			flash_write_cmd(info, 0, 0, FLASH_CMD_RESET);
+			flash_write_cmd(info, 0, FLASH_OFFSET_CFI, FLASH_CMD_CFI);
+			if(flash_isequal(info, 0, FLASH_OFFSET_CFI_RESP,'Q') &&
+			   flash_isequal(info, 0, FLASH_OFFSET_CFI_RESP + 1, 'R') &&
+			   flash_isequal(info, 0, FLASH_OFFSET_CFI_RESP + 2, 'Y')) {
+				debug("found port %d chip %d ", info->portwidth, info->chipwidth);
+				debug("port %d bits chip %d bits\n", info->portwidth << CFI_FLASH_SHIFT_WIDTH, 
+				       info->chipwidth << CFI_FLASH_SHIFT_WIDTH);
+				return 1;
+			}
+		}
+	}
+	puts("not found\n");
+	return 0;
+}
+/*
+ * The following code cannot be run from FLASH!
+ *
+ */
+static ulong flash_get_size (ulong base, int banknum)
+{
+	flash_info_t * info = &flash_info[banknum];
+	int i, j;
+	flash_sect_t sect_cnt;
+	unsigned long sector;
+	unsigned long tmp;
+	int size_ratio;
+	uchar num_erase_regions;
+	int  erase_region_size;
+	int  erase_region_count;
+
+	info->start[0] = base;
+
+	if(flash_detect_cfi(info)){
+		info->vendor = flash_read_ushort(info, 0, FLASH_OFFSET_PRIMARY_VENDOR);
+		switch(info->vendor) {
+		case CFI_CMDSET_INTEL_STANDARD:
+		case CFI_CMDSET_INTEL_EXTENDED:
+		default:
+			info->cmd_reset = FLASH_CMD_RESET;
+			break;
+		case CFI_CMDSET_AMD_STANDARD:
+		case CFI_CMDSET_AMD_EXTENDED:
+			info->cmd_reset = AMD_CMD_RESET;
+			break;
+		}
+			
+		debug("manufacturer is %d\n", info->vendor);
+		size_ratio = info->portwidth / info->chipwidth;
+		num_erase_regions = flash_read_uchar(info, FLASH_OFFSET_NUM_ERASE_REGIONS);
+		debug("size_ration %d port %d bits chip %d bits\n", size_ratio, info->portwidth << CFI_FLASH_SHIFT_WIDTH, 
+			       info->chipwidth << CFI_FLASH_SHIFT_WIDTH);
+		debug("found %d erase regions\n", num_erase_regions);
+		sect_cnt = 0;
+		sector = base;
+		for(i = 0 ; i < num_erase_regions; i++) {
+			if(i > NUM_ERASE_REGIONS) {
+				printf("%d erase regions found, only %d used\n",
+				       num_erase_regions, NUM_ERASE_REGIONS);
+				break;
+			}
+			tmp = flash_read_long(info, 0, FLASH_OFFSET_ERASE_REGIONS + i*4);
+			erase_region_size = (tmp & 0xffff)? ((tmp & 0xffff) * 256): 128;
+			tmp >>= 16;
+			erase_region_count = (tmp & 0xffff) +1;
+			for(j = 0; j< erase_region_count; j++) {
+				info->start[sect_cnt] = sector;
+				sector += (erase_region_size * size_ratio);
+				info->protect[sect_cnt] = flash_isset(info, sect_cnt, FLASH_OFFSET_PROTECT, FLASH_STATUS_PROTECT);
+				sect_cnt++;
+			}
+		}
+
+		info->sector_count = sect_cnt;
+		/* multiply the size by the number of chips */
+		info->size = (1 << flash_read_uchar(info, FLASH_OFFSET_SIZE)) * size_ratio;
+		info->buffer_size = (1 << flash_read_ushort(info, 0, FLASH_OFFSET_BUFFER_SIZE));
+		tmp = 1 << flash_read_uchar(info, FLASH_OFFSET_ETOUT);
+		info->erase_blk_tout = (tmp * (1 << flash_read_uchar(info, FLASH_OFFSET_EMAX_TOUT)));
+		tmp = 1 << flash_read_uchar(info, FLASH_OFFSET_WBTOUT);
+		info->buffer_write_tout = (tmp * (1 << flash_read_uchar(info, FLASH_OFFSET_WBMAX_TOUT)));
+		tmp = 1 << flash_read_uchar(info, FLASH_OFFSET_WTOUT);
+		info->write_tout = (tmp * (1 << flash_read_uchar(info, FLASH_OFFSET_WMAX_TOUT)))/ 1000;
+		info->flash_id = FLASH_MAN_CFI;
+	}
+
+	flash_write_cmd(info, 0, 0, FLASH_CMD_RESET);
+	return(info->size);
+}
+
+
+/*-----------------------------------------------------------------------
+ */
+static int flash_write_cfiword (flash_info_t *info, ulong dest, cfiword_t cword)
+{
+
+	cfiptr_t ctladdr;
+	cfiptr_t cptr;
+	int flag;
+
+	ctladdr.cp = flash_make_addr(info, 0, 0);
+	cptr.cp = (uchar *)dest;
+
+
+	/* Check if Flash is (sufficiently) erased */
+	switch(info->portwidth) {
+	case FLASH_CFI_8BIT:
+		flag = ((cptr.cp[0] & cword.c) == cword.c);
+		break;
+	case FLASH_CFI_16BIT:
+		flag = ((cptr.wp[0] & cword.w) == cword.w);
+		break;
+	case FLASH_CFI_32BIT:
+		flag = ((cptr.lp[0] & cword.l)	== cword.l);
+		break;
+	case FLASH_CFI_64BIT:
+		flag = ((cptr.lp[0] & cword.ll) == cword.ll);
+		break;
+	default:
+		return 2;
+	}
+	if(!flag)
+		return 2;
+
+	/* Disable interrupts which might cause a timeout here */
+	flag = disable_interrupts();
+
+	switch(info->vendor) {
+	case CFI_CMDSET_INTEL_EXTENDED:
+	case CFI_CMDSET_INTEL_STANDARD:
+		flash_write_cmd(info, 0, 0, FLASH_CMD_CLEAR_STATUS);
+		flash_write_cmd(info, 0, 0, FLASH_CMD_WRITE);
+		break;
+	case CFI_CMDSET_AMD_EXTENDED:
+	case CFI_CMDSET_AMD_STANDARD:
+		flash_unlock_seq(info);
+		flash_write_cmd(info, 0, 0x555, AMD_CMD_WRITE);
+		break;
+	}
+
+	switch(info->portwidth) {
+	case FLASH_CFI_8BIT:
+		cptr.cp[0] = cword.c;
+		break;
+	case FLASH_CFI_16BIT:
+		cptr.wp[0] = cword.w;
+		break;
+	case FLASH_CFI_32BIT:
+		cptr.lp[0] = cword.l;
+		break;
+	case FLASH_CFI_64BIT:
+		cptr.llp[0] = cword.ll;
+		break;
+	}
+
+	/* re-enable interrupts if necessary */
+	if(flag)
+		enable_interrupts();
+
+	return flash_full_status_check(info, 0, info->write_tout, "write");
+}
+
+#ifdef CFG_FLASH_USE_BUFFER_WRITE
+
+/* loop through the sectors from the highest address
+ * when the passed address is greater or equal to the sector address
+ * we have a match
+ */
+static flash_sect_t find_sector(flash_info_t *info, ulong addr)
+{
+	flash_sect_t sector;
+	for(sector = info->sector_count - 1; sector >= 0; sector--) {
+		if(addr >= info->start[sector])
+			break;
+	}
+	return sector;
+}
+
+static int flash_write_cfibuffer(flash_info_t * info, ulong dest, uchar * cp, int len)
+{
+	flash_sect_t sector;
+	int cnt;
+	int retcode;
+	volatile cfiptr_t src;
+	volatile cfiptr_t dst;
+
+	src.cp = cp;
+	dst.cp = (uchar *)dest;
+	sector = find_sector(info, dest);
+	flash_write_cmd(info, sector, 0, FLASH_CMD_CLEAR_STATUS);
+	flash_write_cmd(info, sector, 0, FLASH_CMD_WRITE_TO_BUFFER);
+	if((retcode = flash_status_check(info, sector, info->buffer_write_tout,
+					 "write to buffer")) == ERR_OK) {
+		switch(info->portwidth) {
+		case FLASH_CFI_8BIT:
+			cnt = len;
+			break;
+		case FLASH_CFI_16BIT:
+			cnt = len >> 1;
+			break;
+		case FLASH_CFI_32BIT:
+			cnt = len >> 2;
+			break;
+		case FLASH_CFI_64BIT:
+			cnt = len >> 3;
+			break;
+		default:
+			return ERR_INVAL;
+			break;
+		}
+		flash_write_cmd(info, sector, 0, (uchar)cnt-1);
+		while(cnt-- > 0) {
+			switch(info->portwidth) {
+			case FLASH_CFI_8BIT:
+				*dst.cp++ = *src.cp++;
+				break;
+			case FLASH_CFI_16BIT:
+				*dst.wp++ = *src.wp++;
+				break;
+			case FLASH_CFI_32BIT:
+				*dst.lp++ = *src.lp++;
+				break;
+			case FLASH_CFI_64BIT:
+				*dst.llp++ = *src.llp++;
+				break;
+			default:
+				return ERR_INVAL;
+				break;
+			}
+		}
+		flash_write_cmd(info, sector, 0, FLASH_CMD_WRITE_BUFFER_CONFIRM);
+		retcode = flash_full_status_check(info, sector, info->buffer_write_tout,
+					     "buffer write");
+	}
+	flash_write_cmd(info, sector, 0, FLASH_CMD_CLEAR_STATUS);
+	return retcode;
+}
+#endif /* CFG_USE_FLASH_BUFFER_WRITE */
+#endif /* CFG_FLASH_CFI */
diff --git a/drivers/pci_auto.c b/drivers/pci_auto.c
index 20acc07..39b7e8e 100644
--- a/drivers/pci_auto.c
+++ b/drivers/pci_auto.c
@@ -163,7 +163,8 @@ static void pciauto_prescan_setup_bridge(struct pci_controller *hose,
 
 	/* Configure bus number registers */
 	pci_hose_write_config_byte(hose, dev, PCI_PRIMARY_BUS, PCI_BUS(dev));
-	pci_hose_write_config_byte(hose, dev, PCI_SECONDARY_BUS, sub_bus + 1);
+	/* TBS: passed in sub_bus is correct, removed the +1 */
+	pci_hose_write_config_byte(hose, dev, PCI_SECONDARY_BUS, sub_bus);
 	pci_hose_write_config_byte(hose, dev, PCI_SUBORDINATE_BUS, 0xff);
 
 	if (pci_mem)
@@ -284,6 +285,7 @@ int pciauto_config_device(struct pci_controller *hose, pci_dev_t dev)
 	unsigned int sub_bus = PCI_BUS(dev);
 	unsigned short class;
 	unsigned char prg_iface;
+	int n;
 
 	pci_hose_read_config_word(hose, dev, PCI_CLASS_DEVICE, &class);
 
@@ -294,11 +296,19 @@ int pciauto_config_device(struct pci_controller *hose, pci_dev_t dev)
 		pciauto_setup_device(hose, dev, 2, hose->pci_mem, hose->pci_io);
 
 		DEBUGF("PCI Autoconfig: Found P2P bridge, device %d\n", PCI_DEV(dev));
-		pciauto_prescan_setup_bridge(hose, dev, sub_bus);
-
-		pci_hose_scan_bus(hose, hose->current_busno);
-
+		
+		/* TBS: Passing in current_busno allows for sibling P2P bridges */
+		pciauto_prescan_setup_bridge(hose, dev, hose->current_busno);
+		/* 
+		 * TBS: need to figure out if this is a subordinate bridge on the bus 
+		 * to be able to properly set the pri/sec/sub bridge registers.
+		 */
+		n = pci_hose_scan_bus(hose, hose->current_busno);
+
+		/* TBS: figure out the deepest we've gone for this leg */
+		sub_bus = max(n, sub_bus);
 		pciauto_postscan_setup_bridge(hose, dev, sub_bus);
+
 		sub_bus = hose->current_busno;
 		break;
 
diff --git a/include/configs/DK1C20.h b/include/configs/DK1C20.h
index 92c8e51..f357051 100644
--- a/include/configs/DK1C20.h
+++ b/include/configs/DK1C20.h
@@ -647,8 +647,8 @@
  * ASMI is for Cyclone devices only and only works when the configuration
  * is loaded via JTAG or ASMI. Please see doc/README.dk1c20 for details.
  *----------------------------------------------------------------------*/
-#define CONFIG_NIOS_ASMI			/* Enable ASMI		*/
-#define CFG_NIOS_ASMIBASE	0x00920b00	/* ASMI base address	*/
+#define CONFIG_NIOS_ASMI			   /* Enable ASMI	*/
+#define CFG_NIOS_ASMIBASE	CFG_NIOS_CPU_ASMI0 /* ASMI base address	*/
 
 /*------------------------------------------------------------------------
  * COMMANDS
diff --git a/include/flash.h b/include/flash.h
index 8f20887..0cfc76d 100644
--- a/include/flash.h
+++ b/include/flash.h
@@ -42,7 +42,8 @@ typedef struct {
 	ulong	erase_blk_tout;		/* maximum block erase timeout		*/
 	ulong	write_tout;		/* maximum write timeout		*/
 	ulong	buffer_write_tout;	/* maximum buffer write timeout		*/
-
+	ushort  vendor;                 /* the primary vendor id                */
+	ushort  cmd_reset;              /* Vendor specific reset command        */
 #endif
 } flash_info_t;
 
@@ -61,6 +62,8 @@ typedef struct {
 #define FLASH_CFI_BY32		0x04
 #define FLASH_CFI_BY64		0x08
 
+/* convert between bit value and numeric value */
+#define CFI_FLASH_SHIFT_WIDTH      3
 /* Prototypes */
 
 extern unsigned long flash_init (void);
@@ -78,6 +81,8 @@ extern int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt);
 /* board/?/flash.c */
 #if defined(CFG_FLASH_PROTECTION)
 extern int flash_real_protect(flash_info_t *info, long sector, int prot);
+extern void flash_read_user_serial(flash_info_t * info, void * buffer, int offset, int len);
+extern void flash_read_factory_serial(flash_info_t * info, void * buffer, int offset, int len);
 #endif	/* CFG_FLASH_PROTECTION */
 
 /*-----------------------------------------------------------------------