* Patch by Yasushi Shoji, 07 Apr 2004:

  - add support for microblaze processors
  - add support for AtmarkTechno "suzaku" board

40 files changed, 2042 insertions, 11 deletions

diff --git a/CHANGELOG b/CHANGELOG
index 359e33b..e7c273d 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -1,7 +1,11 @@
 ======================================================================
 Changes for U-Boot 1.1.1:
 ======================================================================
- 
+
+* Patch by Yasushi Shoji, 07 Apr 2004:
+  - add support for microblaze processors
+  - add support for AtmarkTechno "suzaku" board
+
 * Configure PPChameleon board to use redundand environment in flash
 
 * Configure PPChameleon board to use JFFS2 NAND support.
diff --git a/Makefile b/Makefile
index 685331b..fbcdeb7 100644
--- a/Makefile
+++ b/Makefile
@@ -75,6 +75,9 @@ endif
 ifeq ($(ARCH),m68k)
 CROSS_COMPILE = m68k-elf-
 endif
+ifeq ($(ARCH),microblaze)
+CROSS_COMPILE = mb-
+endif
 endif
 endif
 
@@ -1250,6 +1253,17 @@ ADNPESC1_config: unconfig
 	@./mkconfig -a ADNPESC1 nios nios adnpesc1 ssv
 
 
+#========================================================================
+# MicroBlaze
+#========================================================================
+#########################################################################
+## Microblaze
+#########################################################################
+suzaku_config:	unconfig
+	@ >include/config.h
+	@echo "#define CONFIG_SUZAKU 1" >> include/config.h
+	@./mkconfig -a $(@:_config=) microblaze microblaze suzaku AtmarkTechno
+
 #########################################################################
 ## MIPS32 AU1X00
 #########################################################################
diff --git a/README b/README
index e8120c4..91b523f 100644
--- a/README
+++ b/README
@@ -240,6 +240,10 @@ The following options need to be configured:
 		CONFIG_ARM7
 		CONFIG_PXA250
 
+		MicroBlaze based CPUs:
+		----------------------
+		CONFIG_MICROBLZE
+
 
 - Board Type:	Define exactly one of
 
@@ -292,6 +296,11 @@ The following options need to be configured:
 		CONFIG_LUBBOCK,			CONFIG_SHANNON,		CONFIG_SMDK2400,
 		CONFIG_SMDK2410,		CONFIG_TRAB,		CONFIG_VCMA9,
 
+		MicroBlaze based boards:
+		------------------------
+
+		CONFIG_SUZAKU
+
 
 - CPU Module Type: (if CONFIG_COGENT is defined)
 		Define exactly one of
diff --git a/board/AtmarkTechno/suzaku/Makefile b/board/AtmarkTechno/suzaku/Makefile
new file mode 100644
index 0000000..7a17067
--- /dev/null
+++ b/board/AtmarkTechno/suzaku/Makefile
@@ -0,0 +1,40 @@
+#
+# (C) Copyright 2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(BOARD).a
+
+OBJS	= $(BOARD).o flash.o
+
+$(LIB):	.depend $(OBJS)
+	$(AR) crv $@ $(OBJS)
+
+#########################################################################
+
+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+		$(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
diff --git a/board/AtmarkTechno/suzaku/config.mk b/board/AtmarkTechno/suzaku/config.mk
new file mode 100644
index 0000000..7bbf2b1
--- /dev/null
+++ b/board/AtmarkTechno/suzaku/config.mk
@@ -0,0 +1,29 @@
+#
+# (C) Copyright 2004 Atmark Techno, Inc.
+#
+# Yasushi SHOJI <yashi@atmark-techno.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+TEXT_BASE = 0x80F00000
+
+PLATFORM_CPPFLAGS += -mno-xl-soft-mul
+PLATFORM_CPPFLAGS += -mno-xl-soft-div
+PLATFORM_CPPFLAGS += -mxl-barrel-shift
diff --git a/board/AtmarkTechno/suzaku/flash.c b/board/AtmarkTechno/suzaku/flash.c
new file mode 100644
index 0000000..49a0673
--- /dev/null
+++ b/board/AtmarkTechno/suzaku/flash.c
@@ -0,0 +1,46 @@
+/*
+ * (C) Copyright 2004 Atmark Techno, Inc.
+ *
+ * Yasushi SHOJI <yashi@atmark-techno.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+
+unsigned long flash_init(void)
+{
+	return 0;
+}
+
+void flash_print_info(flash_info_t *info)
+{
+}
+
+int flash_erase(flash_info_t *info, int s_first, int s_last)
+{
+	return 0;
+}
+
+int write_buff(flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+{
+	return 0;
+}
diff --git a/board/AtmarkTechno/suzaku/suzaku.c b/board/AtmarkTechno/suzaku/suzaku.c
new file mode 100644
index 0000000..6a20248
--- /dev/null
+++ b/board/AtmarkTechno/suzaku/suzaku.c
@@ -0,0 +1,36 @@
+/*
+ * (C) Copyright 2004 Atmark Techno, Inc.
+ *
+ * Yasushi SHOJI <yashi@atmark-techno.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+void board_init(void)
+{
+	serial_init();
+
+	main_loop();
+}
+
+void do_reset(void)
+{
+}
diff --git a/board/AtmarkTechno/suzaku/u-boot.lds b/board/AtmarkTechno/suzaku/u-boot.lds
new file mode 100644
index 0000000..da66a56
--- /dev/null
+++ b/board/AtmarkTechno/suzaku/u-boot.lds
@@ -0,0 +1,65 @@
+/*
+ * (C) Copyright 2004 Atmark Techno, Inc.
+ *
+ * Yasushi SHOJI <yashi@atmark-techno.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(microblaze)
+ENTRY(_start)
+
+SECTIONS
+{
+	.text ALIGN(0x4):
+	{
+		__text_start = .;
+		cpu/microblaze/start.o (.text)
+		*(.text)
+		__text_end = .;
+	}
+
+	.rodata ALIGN(0x4):
+	{
+		__rodata_start = .;
+		*(.rodata)
+		__rodata_end = .;
+	}
+
+	.data ALIGN(0x4):
+	{
+		__data_start = .;
+		*(.data)
+		__data_end = .;
+	}
+
+	.u_boot_cmd ALIGN(0x4):
+	{
+		__u_boot_cmd_start = .;
+		*(.u_boot_cmd)
+		__u_boot_cmd_end = .;
+	}
+
+	.bss ALIGN(0x4):
+	{
+		__bss_start = .;
+		*(.bss)
+		__bss_start = .;
+	}
+}
diff --git a/board/dave/PPChameleonEVB/u-boot.lds b/board/dave/PPChameleonEVB/u-boot.lds
index f4feb33..2693838 100644
--- a/board/dave/PPChameleonEVB/u-boot.lds
+++ b/board/dave/PPChameleonEVB/u-boot.lds
@@ -141,7 +141,7 @@ SECTIONS
   }
 
   . = 0xFFFF8000;
-  .ppcenv : 
+  .ppcenv :
   {
     common/environment.o(.ppcenv);
   }
diff --git a/common/cmd_bootm.c b/common/cmd_bootm.c
index b060491..421269e 100644
--- a/common/cmd_bootm.c
+++ b/common/cmd_bootm.c
@@ -242,6 +242,8 @@ int do_bootm (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	if (hdr->ih_arch != IH_CPU_NIOS)
 #elif defined(__M68K__)
 	if (hdr->ih_arch != IH_CPU_M68K)
+#elif defined(__microblaze__)
+	if (hdr->ih_arch != IH_CPU_MICROBLAZE)
 #else
 # error Unknown CPU type
 #endif
@@ -1185,6 +1187,7 @@ print_type (image_header_t *hdr)
 	case IH_CPU_SPARC:	arch = "SPARC";			break;
 	case IH_CPU_SPARC64:	arch = "SPARC 64 Bit";		break;
 	case IH_CPU_M68K:	arch = "M68K"; 			break;
+	case IH_CPU_MICROBLAZE:	arch = "Microblaze"; 		break;
 	default:		arch = "Unknown Architecture";	break;
 	}
 
diff --git a/cpu/microblaze/Makefile b/cpu/microblaze/Makefile
new file mode 100644
index 0000000..610043e
--- /dev/null
+++ b/cpu/microblaze/Makefile
@@ -0,0 +1,43 @@
+#
+# (C) Copyright 2000
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(CPU).a
+
+START	= start.o
+OBJS	= cpu.o interrupts.o
+
+all:	.depend $(START) $(LIB)
+
+$(LIB):	$(OBJS)
+	$(AR) crv $@ $(OBJS)
+
+#########################################################################
+
+.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c) $(AOBJS:.o=.S)
+	$(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) $(AOBJS:.o=.S) > $@
+
+sinclude .depend
+
+#########################################################################
diff --git a/cpu/microblaze/cpu.c b/cpu/microblaze/cpu.c
new file mode 100644
index 0000000..4d2b270
--- /dev/null
+++ b/cpu/microblaze/cpu.c
@@ -0,0 +1,25 @@
+/*
+ * (C) Copyright 2004 Atmark Techno, Inc.
+ *
+ * Yasushi SHOJI <yashi@atmark-techno.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* EMPTY FILE */
diff --git a/cpu/microblaze/interrupts.c b/cpu/microblaze/interrupts.c
new file mode 100644
index 0000000..ccf67e1
--- /dev/null
+++ b/cpu/microblaze/interrupts.c
@@ -0,0 +1,32 @@
+/*
+ * (C) Copyright 2004 Atmark Techno, Inc.
+ *
+ * Yasushi SHOJI <yashi@atmark-techno.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+void enable_interrupts(void)
+{
+}
+
+int disable_interrupts(void)
+{
+	return 0;
+}
diff --git a/cpu/microblaze/start.S b/cpu/microblaze/start.S
new file mode 100644
index 0000000..7efdbb0
--- /dev/null
+++ b/cpu/microblaze/start.S
@@ -0,0 +1,36 @@
+/*
+ * (C) Copyright 2004 Atmark Techno, Inc.
+ *
+ * Yasushi SHOJI <yashi@atmark-techno.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+
+	.text
+	.global _start
+_start:
+
+	addi	r1, r0, CFG_SDRAM_BASE	/* init stack pointer */
+	addi	r1, r1, CFG_SDRAM_SIZE	/* set sp to high up */
+
+	brai	board_init
+
+1:	bri	1b
diff --git a/drivers/Makefile b/drivers/Makefile
index ff6b6d2..1053624 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -39,7 +39,8 @@ OBJS	= 3c589.o 5701rls.o ali512x.o \
 	  ps2ser.o ps2mult.o pc_keyb.o keyboard.o \
 	  rtl8019.o rtl8139.o \
 	  s3c24x0_i2c.o sed13806.o sed156x.o \
-	  serial.o serial_max3100.o serial_pl011.o serial_pl010.o \
+	  serial.o serial_max3100.o serial_pl010.o serial_pl011.o \
+	  serial_xuartlite.o \
 	  smc91111.o smiLynxEM.o status_led.o sym53c8xx.o \
 	  ti_pci1410a.o tigon3.o w83c553f.o omap1510_i2c.o \
 	  usbdcore.o usbdcore_ep0.o usbdcore_omap1510.o usbtty.o \
diff --git a/drivers/serial_xuartlite.c b/drivers/serial_xuartlite.c
new file mode 100644
index 0000000..3af150d
--- /dev/null
+++ b/drivers/serial_xuartlite.c
@@ -0,0 +1,72 @@
+/*
+ * (C) Copyright 2004 Atmark Techno, Inc.
+ *
+ * Yasushi SHOJI <yashi@atmark-techno.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <asm/serial_xuartlite.h>
+
+/* FIXME: we should convert these to in32 and out32 */
+#define IO_WORD(offset)	     (*(volatile unsigned long *)(offset))
+#define IO_SERIAL(offset)    IO_WORD(CONFIG_SERIAL_BASE + (offset))
+
+#define IO_SERIAL_RX_FIFO   IO_SERIAL(XUL_RX_FIFO_OFFSET)
+#define IO_SERIAL_TX_FIFO   IO_SERIAL(XUL_TX_FIFO_OFFSET)
+#define IO_SERIAL_STATUS    IO_SERIAL(XUL_STATUS_REG_OFFSET)
+#define IO_SERIAL_CONTROL   IO_SERIAL(XUL_CONTROL_REG_OFFSET)
+
+int serial_init(void)
+{
+	/* FIXME: Nothing for now. We should initialize fifo, etc */
+	return 0;
+}
+
+void serial_setbrg(void)
+{
+	/* FIXME: what's this for? */
+}
+
+void serial_putc(const char c)
+{
+	if (c == '\n') serial_putc('\r');
+	while (IO_SERIAL_STATUS & XUL_SR_TX_FIFO_FULL);
+	IO_SERIAL_TX_FIFO = (unsigned char) (c & 0xff);
+	return 0;
+}
+
+void serial_puts(const char * s)
+{
+	while (*s) {
+		serial_putc(*s++);
+	}
+}
+
+int serial_getc(void)
+{
+	while (!(IO_SERIAL_STATUS & XUL_SR_RX_FIFO_VALID_DATA));
+	return IO_SERIAL_RX_FIFO & 0xff;
+}
+
+int serial_tstc(void)
+{
+	return (IO_SERIAL_STATUS & XUL_SR_RX_FIFO_VALID_DATA);
+}
diff --git a/examples/Makefile b/examples/Makefile
index 6bd10b5..f6b127b 100644
--- a/examples/Makefile
+++ b/examples/Makefile
@@ -45,6 +45,10 @@ ifeq ($(ARCH),m68k)
 LOAD_ADDR = 0x20000  -L $(clibdir)
 endif
 
+ifeq ($(ARCH),microblaze)
+LOAD_ADDR = 0x80F00000
+endif
+
 include $(TOPDIR)/config.mk
 
 SREC	= hello_world.srec
diff --git a/examples/stubs.c b/examples/stubs.c
index a897d0d..6f563ed 100644
--- a/examples/stubs.c
+++ b/examples/stubs.c
@@ -94,6 +94,18 @@ gd_t *global_data;
 "	move.l	(%%a0), %%a0\n"		\
 "	jmp	(%%a0)\n"			\
 	: : "i"(offsetof(gd_t, jt)), "i"(XF_ ## x * sizeof(void *)) : "a0");
+#elif defined(CONFIG_MICROBLZE)
+/*
+ * r31 holds the pointer to the global_data. r5 is a call-clobbered.
+ */
+#define EXPORT_FUNC(x)				\
+	asm volatile (				\
+"	.globl " #x "\n"			\
+#x ":\n"					\
+"	lwi	r5, r31, %0\n"			\
+"	lwi	r5, r5, %1\n"			\
+"	bra	r5\n"				\
+	: : "i"(offsetof(gd_t, jt)), "i"(XF_ ## x * sizeof(void *)) : "r5");
 #else
 #error stubs definition missing for this architecture
 #endif
diff --git a/fs/jffs2/jffs2_1pass.c b/fs/jffs2/jffs2_1pass.c
index 9acf37b..10e6df8 100644
--- a/fs/jffs2/jffs2_1pass.c
+++ b/fs/jffs2/jffs2_1pass.c
@@ -182,8 +182,8 @@ static int read_nand_cached(u32 off, u32 size, u_char *buf)
 			if (!nand_cache) {
 				/* This memory never gets freed but 'cause
 				   it's a bootloader, nobody cares */
-				nand_cache = malloc(NAND_CACHE_SIZE); 
-				if (!nand_cache) { 
+				nand_cache = malloc(NAND_CACHE_SIZE);
+				if (!nand_cache) {
 					printf("read_nand_cached: can't alloc cache size %d bytes\n",
 					       NAND_CACHE_SIZE);
 					return -1;
@@ -241,7 +241,7 @@ static void *get_node_mem(u32 off)
 	return ret;
 }
 
-static void put_fl_mem(void *buf) 
+static void put_fl_mem(void *buf)
 {
 	free(buf);
 }
@@ -258,7 +258,7 @@ static inline void *get_node_mem(u32 off)
 	return (void*)off;
 }
 
-static inline void put_fl_mem(void *buf) 
+static inline void put_fl_mem(void *buf)
 {
 }
 
@@ -414,7 +414,7 @@ static int compare_dirents(struct b_node *new, struct b_node *old)
 	struct jffs2_raw_dirent ojOld;
 	struct jffs2_raw_dirent *jNew =
 		(struct jffs2_raw_dirent *)get_fl_mem(new->offset, sizeof(ojNew), &ojNew);
-	struct jffs2_raw_dirent *jOld = 
+	struct jffs2_raw_dirent *jOld =
 		(struct jffs2_raw_dirent *)get_fl_mem(old->offset, sizeof(ojOld), &ojOld);
 	int cmp;
 
@@ -511,7 +511,7 @@ jffs2_1pass_read_inode(struct b_lists *pL, u32 inode, char *dest)
 	 * we will live with it.
 	 */
 	for (b = pL->frag.listHead; b != NULL; b = b->next) {
-		jNode = (struct jffs2_raw_inode *) get_fl_mem(b->offset, 
+		jNode = (struct jffs2_raw_inode *) get_fl_mem(b->offset,
 		        sizeof(struct jffs2_raw_inode), NULL);
 		if ((inode == jNode->ino)) {
 			/* get actual file length from the newest node */
diff --git a/include/asm-microblaze/arch-microblaze/xio.h b/include/asm-microblaze/arch-microblaze/xio.h
new file mode 100644
index 0000000..7eed327
--- /dev/null
+++ b/include/asm-microblaze/arch-microblaze/xio.h
@@ -0,0 +1,63 @@
+/*
+ * xio.h
+ *
+ * Defines XIo functions for Xilinx OCP in terms of Linux primitives
+ *
+ * Author: MontaVista Software, Inc.
+ *         source@mvista.com
+ *
+ * 2002 (c) MontaVista, Software, Inc.  This file is licensed under the terms
+ * of the GNU General Public License version 2.  This program is licensed
+ * "as is" without any warranty of any kind, whether express or implied.
+ */
+
+#ifndef XIO_H
+#define XIO_H
+
+#include "xbasic_types.h"
+#include <asm/io.h>
+
+typedef u32 XIo_Address;
+
+extern inline u8
+XIo_In8(XIo_Address InAddress)
+{
+	return (u8) in_8((volatile unsigned char *) InAddress);
+}
+extern inline u16
+XIo_In16(XIo_Address InAddress)
+{
+	return (u16) in_be16((volatile unsigned short *) InAddress);
+}
+extern inline u32
+XIo_In32(XIo_Address InAddress)
+{
+	return (u32) in_be32((volatile unsigned *) InAddress);
+}
+extern inline void
+XIo_Out8(XIo_Address OutAddress, u8 Value)
+{
+	out_8((volatile unsigned char *) OutAddress, Value);
+}
+extern inline void
+XIo_Out16(XIo_Address OutAddress, u16 Value)
+{
+	out_be16((volatile unsigned short *) OutAddress, Value);
+}
+extern inline void
+XIo_Out32(XIo_Address OutAddress, u32 Value)
+{
+	out_be32((volatile unsigned *) OutAddress, Value);
+}
+
+#define XIo_ToLittleEndian16(s,d) (*(u16*)(d) = cpu_to_le16((u16)(s)))
+#define XIo_ToLittleEndian32(s,d) (*(u32*)(d) = cpu_to_le32((u32)(s)))
+#define XIo_ToBigEndian16(s,d) (*(u16*)(d) = cpu_to_be16((u16)(s)))
+#define XIo_ToBigEndian32(s,d) (*(u32*)(d) = cpu_to_be32((u32)(s)))
+
+#define XIo_FromLittleEndian16(s,d) (*(u16*)(d) = le16_to_cpu((u16)(s)))
+#define XIo_FromLittleEndian32(s,d) (*(u32*)(d) = le32_to_cpu((u32)(s)))
+#define XIo_FromBigEndian16(s,d) (*(u16*)(d) = be16_to_cpu((u16)(s)))
+#define XIo_FromBigEndian32(s,d) (*(u32*)(d) = be32_to_cpu((u32)(s)))
+
+#endif				/* XIO_H */
diff --git a/include/asm-microblaze/bitops.h b/include/asm-microblaze/bitops.h
new file mode 100644
index 0000000..04ea020
--- /dev/null
+++ b/include/asm-microblaze/bitops.h
@@ -0,0 +1,392 @@
+#ifndef _MICROBLAZE_BITOPS_H
+#define _MICROBLAZE_BITOPS_H
+
+/*
+ * Copyright 1992, Linus Torvalds.
+ */
+
+#include <linux/config.h>
+#include <asm/byteorder.h>	/* swab32 */
+#include <asm/system.h>		/* save_flags */
+
+#ifdef __KERNEL__
+/*
+ * Function prototypes to keep gcc -Wall happy
+ */
+
+/*
+ * The __ functions are not atomic
+ */
+
+extern void set_bit(int nr, volatile void * addr);
+extern void __set_bit(int nr, volatile void * addr);
+
+extern void clear_bit(int nr, volatile void * addr);
+#define __clear_bit(nr, addr) clear_bit(nr, addr)
+
+extern void change_bit(int nr, volatile void * addr);
+extern void __change_bit(int nr, volatile void * addr);
+extern int test_and_set_bit(int nr, volatile void * addr);
+extern int __test_and_set_bit(int nr, volatile void * addr);
+extern int test_and_clear_bit(int nr, volatile void * addr);
+extern int __test_and_clear_bit(int nr, volatile void * addr);
+extern int test_and_change_bit(int nr, volatile void * addr);
+extern int __test_and_change_bit(int nr, volatile void * addr);
+extern int __constant_test_bit(int nr, const volatile void * addr);
+extern int __test_bit(int nr, volatile void * addr);
+extern int find_first_zero_bit(void * addr, unsigned size);
+extern int find_next_zero_bit (void * addr, int size, int offset);
+
+/*
+ * ffz = Find First Zero in word. Undefined if no zero exists,
+ * so code should check against ~0UL first..
+ */
+extern __inline__ unsigned long ffz(unsigned long word)
+{
+	unsigned long result = 0;
+
+	while(word & 1) {
+		result++;
+		word >>= 1;
+	}
+	return result;
+}
+
+
+extern __inline__ void set_bit(int nr, volatile void * addr)
+{
+	int	* a = (int *) addr;
+	int	mask;
+	unsigned long flags;
+
+	a += nr >> 5;
+	mask = 1 << (nr & 0x1f);
+	save_flags_cli(flags);
+	*a |= mask;
+	restore_flags(flags);
+}
+
+extern __inline__ void __set_bit(int nr, volatile void * addr)
+{
+	int	* a = (int *) addr;
+	int	mask;
+
+	a += nr >> 5;
+	mask = 1 << (nr & 0x1f);
+	*a |= mask;
+}
+
+/*
+ * clear_bit() doesn't provide any barrier for the compiler.
+ */
+#define smp_mb__before_clear_bit()	barrier()
+#define smp_mb__after_clear_bit()	barrier()
+
+extern __inline__ void clear_bit(int nr, volatile void * addr)
+{
+	int	* a = (int *) addr;
+	int	mask;
+	unsigned long flags;
+
+	a += nr >> 5;
+	mask = 1 << (nr & 0x1f);
+	save_flags_cli(flags);
+	*a &= ~mask;
+	restore_flags(flags);
+}
+
+extern __inline__ void change_bit(int nr, volatile void * addr)
+{
+	int mask;
+	unsigned long flags;
+	unsigned long *ADDR = (unsigned long *) addr;
+
+	ADDR += nr >> 5;
+	mask = 1 << (nr & 31);
+	save_flags_cli(flags);
+	*ADDR ^= mask;
+	restore_flags(flags);
+}
+
+extern __inline__ void __change_bit(int nr, volatile void * addr)
+{
+	int mask;
+	unsigned long *ADDR = (unsigned long *) addr;
+
+	ADDR += nr >> 5;
+	mask = 1 << (nr & 31);
+	*ADDR ^= mask;
+}
+
+extern __inline__ int test_and_set_bit(int nr, volatile void * addr)
+{
+	int	mask, retval;
+	volatile unsigned int *a = (volatile unsigned int *) addr;
+	unsigned long flags;
+
+	a += nr >> 5;
+	mask = 1 << (nr & 0x1f);
+	save_flags_cli(flags);
+	retval = (mask & *a) != 0;
+	*a |= mask;
+	restore_flags(flags);
+
+	return retval;
+}
+
+extern __inline__ int __test_and_set_bit(int nr, volatile void * addr)
+{
+	int	mask, retval;
+	volatile unsigned int *a = (volatile unsigned int *) addr;
+
+	a += nr >> 5;
+	mask = 1 << (nr & 0x1f);
+	retval = (mask & *a) != 0;
+	*a |= mask;
+	return retval;
+}
+
+extern __inline__ int test_and_clear_bit(int nr, volatile void * addr)
+{
+	int	mask, retval;
+	volatile unsigned int *a = (volatile unsigned int *) addr;
+	unsigned long flags;
+
+	a += nr >> 5;
+	mask = 1 << (nr & 0x1f);
+	save_flags_cli(flags);
+	retval = (mask & *a) != 0;
+	*a &= ~mask;
+	restore_flags(flags);
+
+	return retval;
+}
+
+extern __inline__ int __test_and_clear_bit(int nr, volatile void * addr)
+{
+	int	mask, retval;
+	volatile unsigned int *a = (volatile unsigned int *) addr;
+
+	a += nr >> 5;
+	mask = 1 << (nr & 0x1f);
+	retval = (mask & *a) != 0;
+	*a &= ~mask;
+	return retval;
+}
+
+extern __inline__ int test_and_change_bit(int nr, volatile void * addr)
+{
+	int	mask, retval;
+	volatile unsigned int *a = (volatile unsigned int *) addr;
+	unsigned long flags;
+
+	a += nr >> 5;
+	mask = 1 << (nr & 0x1f);
+	save_flags_cli(flags);
+	retval = (mask & *a) != 0;
+	*a ^= mask;
+	restore_flags(flags);
+
+	return retval;
+}
+
+extern __inline__ int __test_and_change_bit(int nr, volatile void * addr)
+{
+	int	mask, retval;
+	volatile unsigned int *a = (volatile unsigned int *) addr;
+
+	a += nr >> 5;
+	mask = 1 << (nr & 0x1f);
+	retval = (mask & *a) != 0;
+	*a ^= mask;
+	return retval;
+}
+
+/*
+ * This routine doesn't need to be atomic.
+ */
+extern __inline__ int __constant_test_bit(int nr, const volatile void * addr)
+{
+	return ((1UL << (nr & 31)) & (((const volatile unsigned int *) addr)[nr >> 5])) != 0;
+}
+
+extern __inline__ int __test_bit(int nr, volatile void * addr)
+{
+	int	* a = (int *) addr;
+	int	mask;
+
+	a += nr >> 5;
+	mask = 1 << (nr & 0x1f);
+	return ((mask & *a) != 0);
+}
+
+#define test_bit(nr,addr) \
+(__builtin_constant_p(nr) ? \
+ __constant_test_bit((nr),(addr)) : \
+ __test_bit((nr),(addr)))
+
+#define find_first_zero_bit(addr, size) \
+	find_next_zero_bit((addr), (size), 0)
+
+extern __inline__ int find_next_zero_bit (void * addr, int size, int offset)
+{
+	unsigned long *p = ((unsigned long *) addr) + (offset >> 5);
+	unsigned long result = offset & ~31UL;
+	unsigned long tmp;
+
+	if (offset >= size)
+		return size;
+	size -= result;
+	offset &= 31UL;
+	if (offset) {
+		tmp = *(p++);
+		tmp |= ~0UL >> (32-offset);
+		if (size < 32)
+			goto found_first;
+		if (~tmp)
+			goto found_middle;
+		size -= 32;
+		result += 32;
+	}
+	while (size & ~31UL) {
+		if (~(tmp = *(p++)))
+			goto found_middle;
+		result += 32;
+		size -= 32;
+	}
+	if (!size)
+		return result;
+	tmp = *p;
+
+found_first:
+	tmp |= ~0UL >> size;
+found_middle:
+	return result + ffz(tmp);
+}
+
+#define ffs(x) generic_ffs(x)
+
+/*
+ * hweightN: returns the hamming weight (i.e. the number
+ * of bits set) of a N-bit word
+ */
+
+#define hweight32(x) generic_hweight32(x)
+#define hweight16(x) generic_hweight16(x)
+#define hweight8(x) generic_hweight8(x)
+
+
+extern __inline__ int ext2_set_bit(int nr, volatile void * addr)
+{
+	int		mask, retval;
+	unsigned long	flags;
+	volatile unsigned char	*ADDR = (unsigned char *) addr;
+
+	ADDR += nr >> 3;
+	mask = 1 << (nr & 0x07);
+	save_flags_cli(flags);
+	retval = (mask & *ADDR) != 0;
+	*ADDR |= mask;
+	restore_flags(flags);
+	return retval;
+}
+
+extern __inline__ int ext2_clear_bit(int nr, volatile void * addr)
+{
+	int		mask, retval;
+	unsigned long	flags;
+	volatile unsigned char	*ADDR = (unsigned char *) addr;
+
+	ADDR += nr >> 3;
+	mask = 1 << (nr & 0x07);
+	save_flags_cli(flags);
+	retval = (mask & *ADDR) != 0;
+	*ADDR &= ~mask;
+	restore_flags(flags);
+	return retval;
+}
+
+extern __inline__ int ext2_test_bit(int nr, const volatile void * addr)
+{
+	int			mask;
+	const volatile unsigned char	*ADDR = (const unsigned char *) addr;
+
+	ADDR += nr >> 3;
+	mask = 1 << (nr & 0x07);
+	return ((mask & *ADDR) != 0);
+}
+
+#define ext2_find_first_zero_bit(addr, size) \
+	ext2_find_next_zero_bit((addr), (size), 0)
+
+extern __inline__ unsigned long ext2_find_next_zero_bit(void *addr, unsigned long size, unsigned long offset)
+{
+	unsigned long *p = ((unsigned long *) addr) + (offset >> 5);
+	unsigned long result = offset & ~31UL;
+	unsigned long tmp;
+
+	if (offset >= size)
+		return size;
+	size -= result;
+	offset &= 31UL;
+	if(offset) {
+		/* We hold the little endian value in tmp, but then the
+		 * shift is illegal. So we could keep a big endian value
+		 * in tmp, like this:
+		 *
+		 * tmp = __swab32(*(p++));
+		 * tmp |= ~0UL >> (32-offset);
+		 *
+		 * but this would decrease preformance, so we change the
+		 * shift:
+		 */
+		tmp = *(p++);
+		tmp |= __swab32(~0UL >> (32-offset));
+		if(size < 32)
+			goto found_first;
+		if(~tmp)
+			goto found_middle;
+		size -= 32;
+		result += 32;
+	}
+	while(size & ~31UL) {
+		if(~(tmp = *(p++)))
+			goto found_middle;
+		result += 32;
+		size -= 32;
+	}
+	if(!size)
+		return result;
+	tmp = *p;
+
+found_first:
+	/* tmp is little endian, so we would have to swab the shift,
+	 * see above. But then we have to swab tmp below for ffz, so
+	 * we might as well do this here.
+	 */
+	return result + ffz(__swab32(tmp) | (~0UL << size));
+found_middle:
+	return result + ffz(__swab32(tmp));
+}
+
+/* Bitmap functions for the minix filesystem.  */
+#define minix_test_and_set_bit(nr,addr) test_and_set_bit(nr,addr)
+#define minix_set_bit(nr,addr) set_bit(nr,addr)
+#define minix_test_and_clear_bit(nr,addr) test_and_clear_bit(nr,addr)
+#define minix_test_bit(nr,addr) test_bit(nr,addr)
+#define minix_find_first_zero_bit(addr,size) find_first_zero_bit(addr,size)
+
+/**
+ * hweightN - returns the hamming weight of a N-bit word
+ * @x: the word to weigh
+ *
+ * The Hamming Weight of a number is the total number of bits set in it.
+ */
+
+#define hweight32(x) generic_hweight32(x)
+#define hweight16(x) generic_hweight16(x)
+#define hweight8(x) generic_hweight8(x)
+
+#endif /* __KERNEL__ */
+
+#endif /* _MICROBLAZE_BITOPS_H */
diff --git a/include/asm-microblaze/byteorder.h b/include/asm-microblaze/byteorder.h
new file mode 100644
index 0000000..51cacb0
--- /dev/null
+++ b/include/asm-microblaze/byteorder.h
@@ -0,0 +1,53 @@
+/*
+ * include/asm-microblaze/byteorder.h -- Endian id and conversion ops
+ *
+ *  Copyright (C) 2003  John Williams <jwilliams@itee.uq.edu.au>
+ *  Copyright (C) 2001  NEC Corporation
+ *  Copyright (C) 2001  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ * Microblaze port by John Williams
+ */
+
+#ifndef __MICROBLAZE_BYTEORDER_H__
+#define __MICROBLAZE_BYTEORDER_H__
+
+#include <asm/types.h>
+
+#ifdef __GNUC__
+
+/* This is effectively a dupe of the arch-independent byteswap
+   code in include/linux/byteorder/swab.h, however we force a cast
+   of the result up to 32 bits.  This in turn forces the compiler
+   to explicitly clear the high 16 bits, which it wasn't doing otherwise.
+
+   I think this is a symptom of a bug in mb-gcc.  JW 20040303
+*/
+static __inline__ __const__ __u16 ___arch__swab16 (__u16 half_word)
+{
+	/* 32 bit temp to cast result, forcing clearing of high word */
+	__u32 temp;
+
+	temp = ((half_word & 0x00FFU) << 8) | ((half_word & 0xFF00U) >> 8);
+
+	return (__u16) temp;
+}
+
+#define __arch__swab16(x) ___arch__swab16(x)
+
+/* Microblaze has no arch-specific endian conversion insns */
+
+#if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
+#  define __BYTEORDER_HAS_U64__
+#  define __SWAB_64_THRU_32__
+#endif
+
+#endif /* __GNUC__ */
+
+#include <linux/byteorder/big_endian.h>
+
+#endif /* __MICROBLAZE_BYTEORDER_H__ */
diff --git a/include/asm-microblaze/global_data.h b/include/asm-microblaze/global_data.h
new file mode 100644
index 0000000..a6e7834
--- /dev/null
+++ b/include/asm-microblaze/global_data.h
@@ -0,0 +1,58 @@
+/*
+ * (C) Copyright 2004 Atmark Techno, Inc.
+ *
+ * Yasushi SHOJI <yashi@atmark-techno.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef	__ASM_GBL_DATA_H
+#define __ASM_GBL_DATA_H
+/*
+ * The following data structure is placed in some memory wich is
+ * available very early after boot (like DPRAM on MPC8xx/MPC82xx, or
+ * some locked parts of the data cache) to allow for a minimum set of
+ * global variables during system initialization (until we have set
+ * up the memory controller so that we can use RAM).
+ *
+ * Keep it *SMALL* and remember to set CFG_GBL_DATA_SIZE > sizeof(gd_t)
+ */
+
+typedef	struct	global_data {
+	bd_t		*bd;
+	unsigned long	flags;
+	unsigned long	baudrate;
+	unsigned long	have_console;	/* serial_init() was called */
+	unsigned long	reloc_off;	/* Relocation Offset */
+	unsigned long	env_addr;	/* Address  of Environment struct */
+	unsigned long	env_valid;	/* Checksum of Environment valid? */
+	unsigned long	fb_base;	/* base address of frame buffer */
+	void		**jt;		/* jump table */
+} gd_t;
+
+/*
+ * Global Data Flags
+ */
+#define	GD_FLG_RELOC	0x00001		/* Code was relocated to RAM		*/
+#define	GD_FLG_DEVINIT	0x00002		/* Devices have been initialized	*/
+#define	GD_FLG_SILENT	0x00004		/* Silent mode				*/
+
+#define DECLARE_GLOBAL_DATA_PTR     register volatile gd_t *gd asm ("r31")
+
+#endif /* __ASM_GBL_DATA_H */
diff --git a/include/asm-microblaze/io.h b/include/asm-microblaze/io.h
new file mode 100644
index 0000000..3359045
--- /dev/null
+++ b/include/asm-microblaze/io.h
@@ -0,0 +1,128 @@
+/*
+ * include/asm-microblaze/io.h -- Misc I/O operations
+ *
+ *  Copyright (C) 2003     John Williams <jwilliams@itee.uq.edu.au>
+ *  Copyright (C) 2001,02  NEC Corporation
+ *  Copyright (C) 2001,02  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ * Microblaze port by John Williams
+ */
+
+#ifndef __MICROBLAZE_IO_H__
+#define __MICROBLAZE_IO_H__
+
+#define IO_SPACE_LIMIT 0xFFFFFFFF
+
+#define readb(addr) \
+  ({ unsigned char __v = (*(volatile unsigned char *) (addr)); __v; })
+#define readw(addr) \
+  ({ unsigned short __v = (*(volatile unsigned short *) (addr)); __v; })
+#define readl(addr) \
+  ({ unsigned long __v = (*(volatile unsigned long *) (addr)); __v; })
+
+#define writeb(b, addr) \
+  (void)((*(volatile unsigned char *) (addr)) = (b))
+#define writew(b, addr) \
+  (void)((*(volatile unsigned short *) (addr)) = (b))
+#define writel(b, addr) \
+  (void)((*(volatile unsigned int *) (addr)) = (b))
+
+#define memset_io(a,b,c)        memset((void *)(a),(b),(c))
+#define memcpy_fromio(a,b,c)    memcpy((a),(void *)(b),(c))
+#define memcpy_toio(a,b,c)      memcpy((void *)(a),(b),(c))
+
+#define inb(addr)	readb (addr)
+#define inw(addr)	readw (addr)
+#define inl(addr)	readl (addr)
+#define outb(x, addr)	((void) writeb (x, addr))
+#define outw(x, addr)	((void) writew (x, addr))
+#define outl(x, addr)	((void) writel (x, addr))
+
+/* Some #definitions to keep strange Xilinx code happy */
+#define in_8(addr)	readb (addr)
+#define in_be16(addr)	readw (addr)
+#define in_be32(addr)	readl (addr)
+
+#define out_8(addr,x )	outb (x,addr)
+#define out_be16(addr,x )	outw (x,addr)
+#define out_be32(addr,x )	outl (x,addr)
+
+
+#define inb_p(port)		inb((port))
+#define outb_p(val, port)	outb((val), (port))
+#define inw_p(port)		inw((port))
+#define outw_p(val, port)	outw((val), (port))
+#define inl_p(port)		inl((port))
+#define outl_p(val, port)	outl((val), (port))
+
+/* Some defines to keep the MTD flash drivers happy */
+
+#define __raw_readb readb
+#define __raw_readw readw
+#define __raw_readl readl
+#define __raw_writeb writeb
+#define __raw_writew writew
+#define __raw_writel writel
+
+static inline void io_insb (unsigned long port, void *dst, unsigned long count)
+{
+	unsigned char *p = dst;
+	while (count--)
+		*p++ = inb (port);
+}
+static inline void io_insw (unsigned long port, void *dst, unsigned long count)
+{
+	unsigned short *p = dst;
+	while (count--)
+		*p++ = inw (port);
+}
+static inline void io_insl (unsigned long port, void *dst, unsigned long count)
+{
+	unsigned long *p = dst;
+	while (count--)
+		*p++ = inl (port);
+}
+
+static inline void
+io_outsb (unsigned long port, const void *src, unsigned long count)
+{
+	const unsigned char *p = src;
+	while (count--)
+		outb (*p++, port);
+}
+static inline void
+io_outsw (unsigned long port, const void *src, unsigned long count)
+{
+	const unsigned short *p = src;
+	while (count--)
+		outw (*p++, port);
+}
+static inline void
+io_outsl (unsigned long port, const void *src, unsigned long count)
+{
+	const unsigned long *p = src;
+	while (count--)
+		outl (*p++, port);
+}
+
+#define outsb(a,b,l) io_outsb(a,b,l)
+#define outsw(a,b,l) io_outsw(a,b,l)
+#define outsl(a,b,l) io_outsl(a,b,l)
+
+#define insb(a,b,l) io_insb(a,b,l)
+#define insw(a,b,l) io_insw(a,b,l)
+#define insl(a,b,l) io_insl(a,b,l)
+
+
+#define iounmap(addr)				((void)0)
+#define ioremap(physaddr, size)			(physaddr)
+#define ioremap_nocache(physaddr, size)		(physaddr)
+#define ioremap_writethrough(physaddr, size)	(physaddr)
+#define ioremap_fullcache(physaddr, size)	(physaddr)
+
+#endif /* __MICROBLAZE_IO_H__ */
diff --git a/include/asm-microblaze/platform.h b/include/asm-microblaze/platform.h
new file mode 100644
index 0000000..2096cce
--- /dev/null
+++ b/include/asm-microblaze/platform.h
@@ -0,0 +1,29 @@
+/*
+ * (C) Copyright 2004 Atmark Techno, Inc.
+ *
+ * Yasushi SHOJI <yashi@atmark-techno.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+
+#ifdef CONFIG_SUZAKU
+#include <asm/suzaku.h>
+#endif
diff --git a/include/asm-microblaze/posix_types.h b/include/asm-microblaze/posix_types.h
new file mode 100644
index 0000000..9a2cc66
--- /dev/null
+++ b/include/asm-microblaze/posix_types.h
@@ -0,0 +1,76 @@
+/*
+ * include/asm-microblaze/posix_types.h -- Kernel versions of standard types
+ *
+ *  Copyright (C) 2003       John Williams <jwilliams@itee.uq.edu.au>
+ *  Copyright (C) 2001,2002  NEC Corporation
+ *  Copyright (C) 2001,2002  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ * Microblaze port by John Williams
+ */
+
+#ifndef __MICROBLAZE_POSIX_TYPES_H__
+#define __MICROBLAZE_POSIX_TYPES_H__
+
+#include <asm/bitops.h>
+
+
+typedef unsigned int	__kernel_dev_t;
+typedef unsigned long	__kernel_ino_t;
+typedef unsigned long long __kernel_ino64_t;
+typedef unsigned int	__kernel_mode_t;
+typedef unsigned int	__kernel_nlink_t;
+typedef long		__kernel_off_t;
+typedef long long	__kernel_loff_t;
+typedef int		__kernel_pid_t;
+typedef unsigned short	__kernel_ipc_pid_t;
+typedef unsigned int	__kernel_uid_t;
+typedef unsigned int	__kernel_gid_t;
+typedef unsigned int	__kernel_size_t;
+typedef int		__kernel_ssize_t;
+typedef int		__kernel_ptrdiff_t;
+typedef long		__kernel_time_t;
+typedef long		__kernel_suseconds_t;
+typedef long		__kernel_clock_t;
+typedef int		__kernel_daddr_t;
+typedef char *		__kernel_caddr_t;
+typedef unsigned short	__kernel_uid16_t;
+typedef unsigned short	__kernel_gid16_t;
+typedef unsigned int	__kernel_uid32_t;
+typedef unsigned int	__kernel_gid32_t;
+
+typedef unsigned short	__kernel_old_uid_t;
+typedef unsigned short	__kernel_old_gid_t;
+
+
+typedef struct {
+#if defined(__KERNEL__) || defined(__USE_ALL)
+	int	val[2];
+#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */
+	int	__val[2];
+#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */
+} __kernel_fsid_t;
+
+
+#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
+
+#undef	__FD_SET
+#define __FD_SET(fd, fd_set) \
+  __set_bit (fd, (void *)&((__kernel_fd_set *)fd_set)->fds_bits)
+#undef __FD_CLR
+#define __FD_CLR(fd, fd_set) \
+  __clear_bit (fd, (void *)&((__kernel_fd_set *)fd_set)->fds_bits)
+#undef	__FD_ISSET
+#define __FD_ISSET(fd, fd_set) \
+  __test_bit (fd, (void *)&((__kernel_fd_set *)fd_set)->fds_bits)
+#undef	__FD_ZERO
+#define __FD_ZERO(fd_set) \
+  memset (fd_set, 0, sizeof (*(fd_set *)fd_set))
+
+#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */
+
+#endif /* __MICROBLAZE_POSIX_TYPES_H__ */
diff --git a/include/asm-microblaze/ptrace.h b/include/asm-microblaze/ptrace.h
new file mode 100644
index 0000000..b796d4f
--- /dev/null
+++ b/include/asm-microblaze/ptrace.h
@@ -0,0 +1,116 @@
+/*
+ * include/asm-microblaze/ptrace.h -- Access to CPU registers
+ *
+ *  Copyright (C) 2003       John Williams <jwilliams@itee.uq.edu.au>
+ *  Copyright (C) 2001,2002  NEC Corporation
+ *  Copyright (C) 2001,2002  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ * Microblaze port by John Williams
+ */
+
+#ifndef __MICROBLAZE_PTRACE_H__
+#define __MICROBLAZE_PTRACE_H__
+
+
+/* Microblaze general purpose registers with special meanings.  */
+#define GPR_ZERO	0	/* constant zero */
+#define GPR_ASM		18	/* reserved for assembler */
+#define GPR_SP		1	/* stack pointer */
+#define GPR_GP		2	/* global data pointer */
+#define GPR_EP		30	/* `element pointer' */
+#define GPR_LP		15	/* link pointer (current return address) */
+
+/* These aren't official names, but they make some code more descriptive.  */
+#define GPR_ARG0	5
+#define GPR_ARG1	6
+#define GPR_ARG2	7
+#define GPR_ARG3	8
+#define GPR_ARG4	9
+#define GPR_ARG5	10
+#define GPR_RVAL0	3
+#define GPR_RVAL1	4
+#define GPR_RVAL	GPR_RVAL0
+
+#define NUM_GPRS	32
+
+/* `system' registers.  */
+/* Note these are old v850 values, microblaze has many fewer */
+#define SR_EIPC		0
+#define SR_EIPSW	1
+#define SR_FEPC		2
+#define SR_FEPSW	3
+#define SR_ECR		4
+#define SR_PSW		5
+#define SR_CTPC		16
+#define SR_CTPSW	17
+#define SR_DBPC		18
+#define SR_DBPSW	19
+#define SR_CTBP		20
+#define SR_DIR		21
+#define SR_ASID		23
+
+
+#ifndef __ASSEMBLY__
+
+typedef unsigned long microblaze_reg_t;
+
+/* How processor state is stored on the stack during a syscall/signal.
+   If you change this structure, change the associated assembly-language
+   macros below too (PT_*)!  */
+struct pt_regs
+{
+	/* General purpose registers.  */
+	microblaze_reg_t gpr[NUM_GPRS];
+
+	microblaze_reg_t pc;		/* program counter */
+	microblaze_reg_t psw;		/* program status word */
+
+	microblaze_reg_t kernel_mode;	/* 1 if in `kernel mode', 0 if user mode */
+	microblaze_reg_t single_step;	/* 1 if in single step mode */
+};
+
+
+#define instruction_pointer(regs)	((regs)->pc)
+#define user_mode(regs)			(!(regs)->kernel_mode)
+
+/* When a struct pt_regs is used to save user state for a system call in
+   the kernel, the system call is stored in the space for R0 (since it's
+   never used otherwise, R0 being a constant 0).  Non-system-calls
+   simply store 0 there.  */
+#define PT_REGS_SYSCALL(regs)		(regs)->gpr[0]
+#define PT_REGS_SET_SYSCALL(regs, val)	((regs)->gpr[0] = (val))
+
+#endif /* !__ASSEMBLY__ */
+
+
+/* The number of bytes used to store each register.  */
+#define _PT_REG_SIZE	4
+
+/* Offset of a general purpose register in a stuct pt_regs.  */
+#define PT_GPR(num)	((num) * _PT_REG_SIZE)
+
+/* Offsets of various special registers & fields in a struct pt_regs.  */
+#define NUM_SPECIAL	4
+#define PT_PC		((NUM_GPRS + 0) * _PT_REG_SIZE)
+#define PT_PSW		((NUM_GPRS + 1) * _PT_REG_SIZE)
+#define PT_KERNEL_MODE	((NUM_GPRS + 2) * _PT_REG_SIZE)
+#define PT_SINGLESTEP	((NUM_GPRS + 3) * _PT_REG_SIZE)
+
+#define PT_SYSCALL	PT_GPR(0)
+
+/* Size of struct pt_regs, including alignment.  */
+#define PT_SIZE		((NUM_GPRS + NUM_SPECIAL) * _PT_REG_SIZE)
+
+/* These are `magic' values for PTRACE_PEEKUSR that return info about where
+   a process is located in memory.  */
+#define PT_TEXT_ADDR    (PT_SIZE + 1)
+#define PT_TEXT_LEN     (PT_SIZE + 2)
+#define PT_DATA_ADDR    (PT_SIZE + 3)
+#define PT_DATA_LEN     (PT_SIZE + 4)
+
+#endif /* __MICROBLAZE_PTRACE_H__ */
diff --git a/include/asm-microblaze/serial_xuartlite.h b/include/asm-microblaze/serial_xuartlite.h
new file mode 100644
index 0000000..6cd1e83
--- /dev/null
+++ b/include/asm-microblaze/serial_xuartlite.h
@@ -0,0 +1,25 @@
+/*
+ * (C) Copyright 2004 Atmark Techno, Inc.
+ *
+ * Yasushi SHOJI <yashi@atmark-techno.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <asm/arch/xuartlite_l.h>
diff --git a/include/asm-microblaze/string.h b/include/asm-microblaze/string.h
new file mode 100644
index 0000000..724f5bd
--- /dev/null
+++ b/include/asm-microblaze/string.h
@@ -0,0 +1,31 @@
+/*
+ * include/asm-microblaze/string.h -- Architecture specific string routines
+ *
+ *  Copyright (C) 2003       John Williams <jwilliams@itee.uq.edu.au>
+ *  Copyright (C) 2001,2002  NEC Corporation
+ *  Copyright (C) 2001,2002  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ * Microblaze port by John Williams
+ */
+
+#ifndef __MICROBLAZE_STRING_H__
+#define __MICROBLAZE_STRING_H__
+
+#if 0
+#define __HAVE_ARCH_BCOPY
+#define __HAVE_ARCH_MEMCPY
+#define __HAVE_ARCH_MEMSET
+#define __HAVE_ARCH_MEMMOVE
+
+extern void *memcpy (void *, const void *, __kernel_size_t);
+extern void bcopy (const char *, char *, int);
+extern void *memset (void *, int, __kernel_size_t);
+extern void *memmove (void *, const void *, __kernel_size_t);
+#endif
+
+#endif /* __MICROBLAZE_STRING_H__ */
diff --git a/include/asm-microblaze/suzaku.h b/include/asm-microblaze/suzaku.h
new file mode 100644
index 0000000..4d2b270
--- /dev/null
+++ b/include/asm-microblaze/suzaku.h
@@ -0,0 +1,25 @@
+/*
+ * (C) Copyright 2004 Atmark Techno, Inc.
+ *
+ * Yasushi SHOJI <yashi@atmark-techno.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* EMPTY FILE */
diff --git a/include/asm-microblaze/system.h b/include/asm-microblaze/system.h
new file mode 100644
index 0000000..0297a11
--- /dev/null
+++ b/include/asm-microblaze/system.h
@@ -0,0 +1,161 @@
+/*
+ * include/asm-microblaze/system.h -- Low-level interrupt/thread ops
+ *
+ *  Copyright (C) 2003	John Williams (jwilliams@itee.uq.edu.au)
+ *			based upon microblaze version
+ *  Copyright (C) 2001	NEC Corporation
+ *  Copyright (C) 2001	Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ * Microblaze port by John Williams
+ * Microblaze port by John Williams
+ */
+
+#ifndef __MICROBLAZE_SYSTEM_H__
+#define __MICROBLAZE_SYSTEM_H__
+
+#if 0
+#include <linux/linkage.h>
+#endif
+#include <asm/ptrace.h>
+
+#define prepare_to_switch()	do { } while (0)
+
+/*
+ * switch_to(n) should switch tasks to task ptr, first checking that
+ * ptr isn't the current task, in which case it does nothing.
+ */
+struct thread_struct;
+extern void *switch_thread (struct thread_struct *last,
+			    struct thread_struct *next);
+#define switch_to(prev,next,last) do {					\
+	if (prev != next) {						\
+		(last) = switch_thread (&prev->thread, &next->thread);	\
+	}								\
+} while (0)
+
+
+/* Enable/disable interrupts.  */
+#define __sti() \
+{								\
+	register unsigned tmp;					\
+	__asm__ __volatile__ ("					\
+			mfs	%0, rmsr;			\
+			ori	%0, %0, 2;			\
+			mts	rmsr, %0"			\
+			: "=r" (tmp)				\
+			:					\
+			: "memory");				\
+}
+
+#define __cli() \
+{								\
+	register unsigned tmp;					\
+	__asm__ __volatile__ ("					\
+			mfs	%0, rmsr;			\
+			andi	%0, %0, ~2;			\
+			mts	rmsr, %0"			\
+			: "=r" (tmp)				\
+			:					\
+			: "memory");				\
+}
+
+#define __save_flags(flags) \
+	__asm__ __volatile__ ("mfs	%0, rmsr" : "=r" (flags))
+#define __restore_flags(flags) \
+	__asm__ __volatile__ ("mts	rmsr, %0" :: "r" (flags))
+
+#define __save_flags_cli(flags) \
+{								\
+	register unsigned tmp;					\
+	__asm__ __volatile__ ("					\
+			mfs	%0, rmsr;			\
+			andi	%1, %0, ~2;			\
+			mts	rmsr, %1;"			\
+			: "=r" (flags), "=r" (tmp)		\
+			:					\
+			: "memory");				\
+}
+
+#define __save_flags_sti(flags)					\
+{								\
+	register unsigned tmp;					\
+	__asm__ __volatile__ ("					\
+			mfs	%0, rmsr;			\
+			ori	%1, %0, 2;			\
+			mts	rmsr, %1;"			\
+			: "=r" (flags) ,"=r" (tmp)		\
+			:					\
+			: "memory");				\
+}
+
+/* For spinlocks etc */
+#define local_irq_save(flags)	__save_flags_cli (flags)
+#define local_irq_set(flags)	__save_flags_sti (flags)
+#define local_irq_restore(flags) __restore_flags (flags)
+#define local_irq_disable()	__cli ()
+#define local_irq_enable()	__sti ()
+
+#define cli()			__cli ()
+#define sti()			__sti ()
+#define save_flags(flags)	__save_flags (flags)
+#define restore_flags(flags)	__restore_flags (flags)
+#define save_flags_cli(flags)	__save_flags_cli (flags)
+
+/*
+ * Force strict CPU ordering.
+ * Not really required on microblaze...
+ */
+#define nop()			__asm__ __volatile__ ("nop")
+#define mb()			__asm__ __volatile__ ("nop" ::: "memory")
+#define rmb()			mb ()
+#define wmb()			mb ()
+#define set_mb(var, value)	do { var = value; mb(); } while (0)
+#define set_wmb(var, value)	do { var = value; wmb (); } while (0)
+
+#ifdef CONFIG_SMP
+#define smp_mb()	mb ()
+#define smp_rmb()	rmb ()
+#define smp_wmb()	wmb ()
+#else
+#define smp_mb()	barrier ()
+#define smp_rmb()	barrier ()
+#define smp_wmb()	barrier ()
+#endif
+
+#define xchg(ptr, with) \
+  ((__typeof__ (*(ptr)))__xchg ((unsigned long)(with), (ptr), sizeof (*(ptr))))
+#define tas(ptr) (xchg ((ptr), 1))
+
+extern inline unsigned long __xchg (unsigned long with,
+				    __volatile__ void *ptr, int size)
+{
+	unsigned long tmp, flags;
+
+	save_flags_cli (flags);
+
+	switch (size) {
+	case 1:
+		tmp = *(unsigned char *)ptr;
+		*(unsigned char *)ptr = with;
+		break;
+	case 2:
+		tmp = *(unsigned short *)ptr;
+		*(unsigned short *)ptr = with;
+		break;
+	case 4:
+		tmp = *(unsigned long *)ptr;
+		*(unsigned long *)ptr = with;
+		break;
+	}
+
+	restore_flags (flags);
+
+	return tmp;
+}
+
+#endif /* __MICROBLAZE_SYSTEM_H__ */
diff --git a/include/asm-microblaze/types.h b/include/asm-microblaze/types.h
new file mode 100644
index 0000000..8c4bef2
--- /dev/null
+++ b/include/asm-microblaze/types.h
@@ -0,0 +1,57 @@
+#ifndef _ASM_TYPES_H
+#define _ASM_TYPES_H
+
+/*
+ * This file is never included by application software unless
+ * explicitly requested (e.g., via linux/types.h) in which case the
+ * application is Linux specific so (user-) name space pollution is
+ * not a major issue.  However, for interoperability, libraries still
+ * need to be careful to avoid a name clashes.
+ */
+
+typedef unsigned short umode_t;
+
+/*
+ * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the
+ * header files exported to user space
+ */
+
+typedef __signed__ char __s8;
+typedef unsigned char __u8;
+
+typedef __signed__ short __s16;
+typedef unsigned short __u16;
+
+typedef __signed__ int __s32;
+typedef unsigned int __u32;
+
+#if defined(__GNUC__) && !defined(__STRICT_ANSI__)
+typedef __signed__ long long __s64;
+typedef unsigned long long __u64;
+#endif
+
+/*
+ * These aren't exported outside the kernel to avoid name space clashes
+ */
+#ifdef __KERNEL__
+
+typedef signed char s8;
+typedef unsigned char u8;
+
+typedef signed short s16;
+typedef unsigned short u16;
+
+typedef signed int s32;
+typedef unsigned int u32;
+
+typedef signed long long s64;
+typedef unsigned long long u64;
+
+#define BITS_PER_LONG 32
+
+/* Dma addresses are 32-bits wide.  */
+
+typedef u32 dma_addr_t;
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_TYPES_H */
diff --git a/include/asm-microblaze/u-boot.h b/include/asm-microblaze/u-boot.h
new file mode 100644
index 0000000..4531e72
--- /dev/null
+++ b/include/asm-microblaze/u-boot.h
@@ -0,0 +1,42 @@
+/*
+ * (C) Copyright 2004 Atmark Techno, Inc.
+ *
+ * Yasushi SHOJI <yashi@atmark-techno.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _U_BOOT_H_
+#define _U_BOOT_H_
+
+typedef struct bd_info {
+	unsigned long	bi_memstart;	/* start of DRAM memory */
+	unsigned long	bi_memsize;	/* size	 of DRAM memory in bytes */
+	unsigned long	bi_flashstart;	/* start of FLASH memory */
+	unsigned long	bi_flashsize;	/* size	 of FLASH memory */
+	unsigned long	bi_flashoffset; /* reserved area for startup monitor */
+	unsigned long	bi_sramstart;	/* start of SRAM memory */
+	unsigned long	bi_sramsize;	/* size	 of SRAM memory */
+	unsigned long	bi_ip_addr;	/* IP Address */
+	unsigned char	bi_enetaddr[6]; /* Ethernet adress */
+	unsigned long	bi_baudrate;	/* Console Baudrate */
+} bd_t;
+
+
+#endif	/* _U_BOOT_H_ */
diff --git a/include/configs/suzaku.h b/include/configs/suzaku.h
new file mode 100644
index 0000000..5c5cdf4
--- /dev/null
+++ b/include/configs/suzaku.h
@@ -0,0 +1,90 @@
+/*
+ * (C) Copyright 2004 Atmark Techno, Inc.
+ *
+ * Yasushi SHOJI <yashi@atmark-techno.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * If we are developing, we might want to start armboot from ram
+ * so we MUST NOT initialize critical regs like mem-timing ...
+ */
+#define CONFIG_INIT_CRITICAL		/* undef for developing */
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+
+#define CONFIG_MICROBLZE	1	/* This is an MicroBlaze CPU	*/
+#define CONFIG_SUZAKU		1	/* on an SUZAKU Board		*/
+
+/*-----------------------------------------------------------------------
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ */
+#define CFG_SDRAM_BASE		0x80000000
+#define CFG_SDRAM_SIZE		0x01000000
+#define CFG_FLASH_BASE		0xfff00000
+#define CFG_RESET_ADDRESS	0xfff00100
+#define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor */
+#define CFG_MONITOR_BASE        (CFG_SDRAM_BASE + CFG_SDRAM_SIZE - (1024 * 1024))
+#define CFG_MALLOC_LEN		(256 << 10)	/* Reserve 256 kB for malloc */
+
+#define CONFIG_BAUDRATE		115200
+#define CFG_BAUDRATE_TABLE	{ 115200 }
+
+#define CONFIG_COMMANDS		(CONFIG__CMD_DFL)
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+#define CFG_UART1_BASE		(0xFFFF2000)
+#define CONFIG_SERIAL_BASE	CFG_UART1_BASE
+
+/*
+ * Miscellaneous configurable options
+ */
+#define	CFG_LONGHELP				/* undef to save memory		*/
+#define CFG_PROMPT		"SUZAKU> "	/* Monitor Command Prompt	*/
+#define CFG_CBSIZE		256
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size	*/
+#define CFG_MAXARGS		16		/* max number of command args	*/
+
+#define CFG_LOAD_ADDR		CFG_SDRAM_BASE	/* default load address		*/
+
+/*-----------------------------------------------------------------------
+ * FLASH organization
+ */
+#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CFG_MAX_FLASH_SECT	1	/* max number of sectors on one chip	*/
+
+/*-----------------------------------------------------------------------
+ * NVRAM organization
+ */
+#define CFG_ENV_IS_NOWHERE	1
+#define	CFG_ENV_SIZE		0x10000	/* Total Size of Environment Sector	*/
+#define CFG_ENV_SECT_SIZE	0x10000	/* see README - env sector total size	*/
+
+#endif	/* __CONFIG_H */
diff --git a/include/image.h b/include/image.h
index d4fdb05..b319210 100644
--- a/include/image.h
+++ b/include/image.h
@@ -64,8 +64,9 @@
 #define IH_CPU_SH		9	/* SuperH	*/
 #define IH_CPU_SPARC		10	/* Sparc	*/
 #define IH_CPU_SPARC64		11	/* Sparc 64 Bit */
-#define	IH_CPU_M68K		12	/* M68K		*/
-#define	IH_CPU_NIOS		13	/* Nios-32	*/
+#define IH_CPU_M68K		12	/* M68K		*/
+#define IH_CPU_NIOS		13	/* Nios-32	*/
+#define IH_CPU_MICROBLAZE	14	/* MicroBlaze   */
 
 /*
  * Image Types
diff --git a/lib_microblaze/Makefile b/lib_microblaze/Makefile
new file mode 100644
index 0000000..b683da8
--- /dev/null
+++ b/lib_microblaze/Makefile
@@ -0,0 +1,44 @@
+#
+# (C) Copyright 2003-2004
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(ARCH).a
+
+AOBJS	=
+
+COBJS	= board.o microblaze_linux.o time.o
+
+OBJS	= $(AOBJS) $(COBJS)
+
+$(LIB):	.depend $(OBJS)
+	$(AR) crv $@ $(OBJS)
+
+#########################################################################
+
+.depend:	Makefile $(AOBJS:.o=.S) $(COBJS:.o=.c)
+		$(CC) -M $(CFLAGS) $(AOBJS:.o=.S) $(COBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
diff --git a/lib_microblaze/board.c b/lib_microblaze/board.c
new file mode 100644
index 0000000..3e3fb37
--- /dev/null
+++ b/lib_microblaze/board.c
@@ -0,0 +1,76 @@
+/*
+ * (C) Copyright 2004 Atmark Techno, Inc.
+ *
+ * Yasushi SHOJI <yashi@atmark-techno.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <malloc.h>
+#include <version.h>
+
+const char version_string[] =
+	U_BOOT_VERSION" (" __DATE__ " - " __TIME__ ")";
+
+/*
+ * Begin and End of memory area for malloc(), and current "brk"
+ */
+static ulong mem_malloc_start;
+static ulong mem_malloc_end;
+static ulong mem_malloc_brk;
+
+
+void *sbrk (ptrdiff_t increment)
+{
+	ulong old = mem_malloc_brk;
+	ulong new = old + increment;
+
+	if ((new < mem_malloc_start) || (new > mem_malloc_end)) {
+		return (NULL);
+	}
+	mem_malloc_brk = new;
+	return ((void *) old);
+}
+
+/*
+ * All attempts to come up with a "common" initialization sequence
+ * that works for all boards and architectures failed: some of the
+ * requirements are just _too_ different. To get rid of the resulting
+ * mess of board dependend #ifdef'ed code we now make the whole
+ * initialization sequence configurable to the user.
+ *
+ * The requirements for any new initalization function is simple: it
+ * receives a pointer to the "global data" structure as it's only
+ * argument, and returns an integer return code, where 0 means
+ * "continue" and != 0 means "fatal error, hang the system".
+ */
+typedef int (init_fnc_t) (void);
+
+init_fnc_t *init_sequence[] = {
+	serial_init,		/* serial communications setup */
+	NULL,
+};
+
+void hang (void)
+{
+	puts ("### ERROR ### Please RESET the board ###\n");
+	for (;;);
+}
diff --git a/lib_microblaze/microblaze_linux.c b/lib_microblaze/microblaze_linux.c
new file mode 100644
index 0000000..b3a0815
--- /dev/null
+++ b/lib_microblaze/microblaze_linux.c
@@ -0,0 +1,31 @@
+/*
+ * (C) Copyright 2004 Atmark Techno, Inc.
+ *
+ * Yasushi SHOJI <yashi@atmark-techno.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+
+void do_bootm_linux(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[],
+		ulong addr, ulong *len_ptr, int   verify)
+{
+}
diff --git a/lib_microblaze/time.c b/lib_microblaze/time.c
new file mode 100644
index 0000000..12e8488
--- /dev/null
+++ b/lib_microblaze/time.c
@@ -0,0 +1,27 @@
+/*
+ * (C) Copyright 2004 Atmark Techno, Inc.
+ *
+ * Yasushi SHOJI <yashi@atmark-techno.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+void udelay(unsigned long usec)
+{
+}
diff --git a/microblaze_config.mk b/microblaze_config.mk
new file mode 100644
index 0000000..cd7548c
--- /dev/null
+++ b/microblaze_config.mk
@@ -0,0 +1,35 @@
+#
+# (C) Copyright 2004 Atmark Techno, Inc.
+#
+# Yasushi SHOJI <yashi@atmark-techno.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+ifdef CONFIG_MICROBLAZE_HARD_MULT
+PLATFORM_CPPFLAGS += -mno-xl-soft-mul
+endif
+
+ifdef CONFIG_MICROBLAZE_HARD_DIV
+PLATFORM_CPPFLAGS += -mno-xl-soft-div
+endif
+
+ifdef CONFIG_MICROBLAZE_HARD_BARREL
+PLATFORM_CPPFLAGS += -mxl-barrel-shift
+endif