MPC512x: remove include/mpc512x.h

Move needed definitions (register descriptions etc.) from
include/mpc512x.h  into  include/asm-ppc/immap_512x.h.

Instead of using a #define'd register offset, use a function that
provides the PATA controller's base address.

All the rest of include/mpc512x.h are register offset definitions
which can be eliminated by proper use of C structures.

There are only a few register offsets remaining that are needed in
cpu/mpc512x/start.S; for these we provide cpu/mpc512x/asm-offsets.h
which is intended as a temporary workaround only. In a later patch
this file will be removed, too, and then auto-generated from the
respective C structs.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: John Rigby <jcrigby@gmail.com>

13 files changed, 383 insertions, 760 deletions

diff --git a/common/cmd_ide.c b/common/cmd_ide.c
index feda773..4d7a0ac 100644
--- a/common/cmd_ide.c
+++ b/common/cmd_ide.c
@@ -45,10 +45,6 @@
 #include <mpc5xxx.h>
 #endif
 
-#ifdef CONFIG_MPC512X
-#include <mpc512x.h>
-#endif
-
 #include <ide.h>
 #include <ata.h>
 
diff --git a/cpu/mpc512x/asm-offsets.h b/cpu/mpc512x/asm-offsets.h
new file mode 100644
index 0000000..4b14778
--- /dev/null
+++ b/cpu/mpc512x/asm-offsets.h
@@ -0,0 +1,15 @@
+/*
+ * needed for cpu/mpc512x/start.S
+ *
+ * These should be auto-generated
+ */
+#define LPCS0AW			0x0024
+#define SRAMBAR			0x00C4
+#define SWCRR			0x0904
+#define LPC_OFFSET		0x10000
+#define CS0_CONFIG		0x00000
+#define CS_CTRL			0x00020
+#define CS_CTRL_ME		0x01000000	/* CS Master Enable bit */
+
+#define EXC_OFF_SYS_RESET	0x0100
+#define	_START_OFFSET		EXC_OFF_SYS_RESET
diff --git a/cpu/mpc512x/cpu.c b/cpu/mpc512x/cpu.c
index 8021bc1..42ccd81 100644
--- a/cpu/mpc512x/cpu.c
+++ b/cpu/mpc512x/cpu.c
@@ -29,7 +29,6 @@
 
 #include <common.h>
 #include <command.h>
-#include <mpc512x.h>
 #include <net.h>
 #include <netdev.h>
 #include <asm/processor.h>
diff --git a/cpu/mpc512x/cpu_init.c b/cpu/mpc512x/cpu_init.c
index 69ec871..fe6beaf 100644
--- a/cpu/mpc512x/cpu_init.c
+++ b/cpu/mpc512x/cpu_init.c
@@ -25,7 +25,6 @@
  */
 
 #include <common.h>
-#include <mpc512x.h>
 #include <asm/io.h>
 #include <asm/processor.h>
 
diff --git a/cpu/mpc512x/i2c.c b/cpu/mpc512x/i2c.c
index 4a3f9a0..97bda0d 100644
--- a/cpu/mpc512x/i2c.c
+++ b/cpu/mpc512x/i2c.c
@@ -30,7 +30,6 @@ DECLARE_GLOBAL_DATA_PTR;
 
 #ifdef CONFIG_HARD_I2C
 
-#include <mpc512x.h>
 #include <i2c.h>
 
 /* by default set I2C bus 0 active */
diff --git a/cpu/mpc512x/speed.c b/cpu/mpc512x/speed.c
index 0fec004..ce8d094 100644
--- a/cpu/mpc512x/speed.c
+++ b/cpu/mpc512x/speed.c
@@ -26,7 +26,6 @@
  */
 
 #include <common.h>
-#include <mpc512x.h>
 #include <command.h>
 #include <asm/io.h>
 #include <asm/processor.h>
diff --git a/cpu/mpc512x/start.S b/cpu/mpc512x/start.S
index 360682d..178e5d1 100644
--- a/cpu/mpc512x/start.S
+++ b/cpu/mpc512x/start.S
@@ -1,7 +1,7 @@
 /*
  * Copyright (C) 1998  Dan Malek <dmalek@jlc.net>
  * Copyright (C) 1999  Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se>
- * Copyright (C) 2000, 2001, 2002, 2007 Wolfgang Denk <wd@denx.de>
+ * Copyright (C) 2000-2009 Wolfgang Denk <wd@denx.de>
  * Copyright Freescale Semiconductor, Inc. 2004, 2006. All rights reserved.
  *
  * See file CREDITS for list of people who contributed to this
@@ -30,12 +30,14 @@
  */
 
 #include <config.h>
-#include <mpc512x.h>
 #include <timestamp.h>
 #include <version.h>
 
 #define CONFIG_521X	1		/* needed for Linux kernel header files*/
 
+#include <asm/immap_512x.h>
+#include "asm-offsets.h"
+
 #include <ppc_asm.tmpl>
 #include <ppc_defs.h>
 
diff --git a/drivers/net/mpc512x_fec.c b/drivers/net/mpc512x_fec.c
index 62931d1..fb2c19a 100644
--- a/drivers/net/mpc512x_fec.c
+++ b/drivers/net/mpc512x_fec.c
@@ -7,7 +7,6 @@
  */
 
 #include <common.h>
-#include <mpc512x.h>
 #include <malloc.h>
 #include <net.h>
 #include <netdev.h>
@@ -27,11 +26,11 @@ DECLARE_GLOBAL_DATA_PTR;
 #endif
 
 #if (DEBUG & 0x40)
-static uint32 local_crc32(char *string, unsigned int crc_value, int len);
+static u32 local_crc32(char *string, unsigned int crc_value, int len);
 #endif
 
-int fec512x_miiphy_read(char *devname, uint8 phyAddr, uint8 regAddr, uint16 * retVal);
-int fec512x_miiphy_write(char *devname, uint8 phyAddr, uint8 regAddr, uint16 data);
+int fec512x_miiphy_read(char *devname, u8 phyAddr, u8 regAddr, u16 * retVal);
+int fec512x_miiphy_write(char *devname, u8 phyAddr, u8 regAddr, u16 data);
 int mpc512x_fec_init_phy(struct eth_device *dev, bd_t * bis);
 
 static uchar rx_buff[FEC_BUFFER_SIZE];
@@ -41,9 +40,9 @@ static int rx_buff_idx = 0;
 #if (DEBUG & 0x2)
 static void mpc512x_fec_phydump (char *devname)
 {
-	uint16 phyStatus, i;
-	uint8 phyAddr = CONFIG_PHY_ADDR;
-	uint8 reg_mask[] = {
+	u16 phyStatus, i;
+	u8 phyAddr = CONFIG_PHY_ADDR;
+	u8 reg_mask[] = {
 		/* regs to print: 0...8, 21,27,31 */
 		1, 1, 1, 1,  1, 1, 1, 1,     1, 0, 0, 0,  0, 0, 0, 0,
 		0, 0, 0, 0,  0, 1, 0, 0,     0, 0, 0, 1,  0, 0, 0, 1,
@@ -68,7 +67,7 @@ static int mpc512x_fec_bd_init (mpc512x_fec_priv *fec)
 	 */
 	for (ix = 0; ix < FEC_RBD_NUM; ix++) {
 		fec->bdBase->rbd[ix].dataPointer =
-				(uint32)&fec->bdBase->recv_frames[ix];
+				(u32)&fec->bdBase->recv_frames[ix];
 		fec->bdBase->rbd[ix].status = FEC_RBD_EMPTY;
 		fec->bdBase->rbd[ix].dataLength = 0;
 	}
@@ -167,10 +166,10 @@ static void mpc512x_fec_tbd_scrub (mpc512x_fec_priv *fec)
 /********************************************************************/
 static void mpc512x_fec_set_hwaddr (mpc512x_fec_priv *fec, char *mac)
 {
-	uint8 currByte;			/* byte for which to compute the CRC */
+	u8 currByte;			/* byte for which to compute the CRC */
 	int byte;			/* loop - counter */
 	int bit;			/* loop - counter */
-	uint32 crc = 0xffffffff;	/* initial value */
+	u32 crc = 0xffffffff;		/* initial value */
 
 	/*
 	 * The algorithm used is the following:
@@ -257,8 +256,8 @@ static int mpc512x_fec_init (struct eth_device *dev, bd_t * bis)
 	out_be32(&fec->eth->r_buff_size, FEC_BUFFER_SIZE);
 
 	/* Setup BD base addresses */
-	out_be32(&fec->eth->r_des_start, (uint32)fec->bdBase->rbd);
-	out_be32(&fec->eth->x_des_start, (uint32)fec->bdBase->tbd);
+	out_be32(&fec->eth->r_des_start, (u32)fec->bdBase->rbd);
+	out_be32(&fec->eth->x_des_start, (u32)fec->bdBase->tbd);
 
 	/* DMA Control */
 	out_be32(&fec->eth->dma_control, 0xc0000000);
@@ -282,9 +281,9 @@ static int mpc512x_fec_init (struct eth_device *dev, bd_t * bis)
 int mpc512x_fec_init_phy (struct eth_device *dev, bd_t * bis)
 {
 	mpc512x_fec_priv *fec = (mpc512x_fec_priv *)dev->priv;
-	const uint8 phyAddr = CONFIG_PHY_ADDR;	/* Only one PHY */
+	const u8 phyAddr = CONFIG_PHY_ADDR;	/* Only one PHY */
 	int timeout = 1;
-	uint16 phyStatus;
+	u16 phyStatus;
 
 #if (DEBUG & 0x1)
 	printf ("mpc512x_fec_init_phy... Begin\n");
@@ -495,7 +494,7 @@ static int mpc512x_fec_send (struct eth_device *dev, volatile void *eth_data,
 	 */
 	pTbd = &fec->bdBase->tbd[fec->tbdIndex];
 	pTbd->dataLength = data_length;
-	pTbd->dataPointer = (uint32)eth_data;
+	pTbd->dataPointer = (u32)eth_data;
 	pTbd->status |= FEC_TBD_LAST | FEC_TBD_TC | FEC_TBD_READY;
 	fec->tbdIndex = (fec->tbdIndex + 1) % FEC_TBD_NUM;
 
@@ -581,7 +580,7 @@ static int mpc512x_fec_recv (struct eth_device *dev)
 				printf ("recv data length 0x%08x data hdr: ",
 					pRbd->dataLength);
 				for (i = 0; i < 14; i++)
-					printf ("%x ", *((uint8*)pRbd->dataPointer + i));
+					printf ("%x ", *((u8*)pRbd->dataPointer + i));
 				printf("\n");
 			}
 #endif
@@ -647,14 +646,15 @@ int mpc512x_fec_initialize (bd_t * bis)
 #endif
 
 	/* Clean up space FEC's MIB and FIFO RAM ...*/
-	memset ((void *) MPC512X_FEC + 0x200, 0x00, 0x400);
+	memset ((void *)&im->fec.mib,  0x00, sizeof(im->fec.mib));
+	memset ((void *)&im->fec.fifo, 0x00, sizeof(im->fec.fifo));
 
 	/*
 	 * Malloc space for BDs  (must be quad word-aligned)
 	 * this pointer is lost, so cannot be freed
 	 */
 	bd = malloc (sizeof(mpc512x_buff_descs) + 0x1f);
-	fec->bdBase = (mpc512x_buff_descs*)((uint32)bd & 0xfffffff0);
+	fec->bdBase = (mpc512x_buff_descs*)((u32)bd & 0xfffffff0);
 	memset ((void *) bd, 0x00, sizeof(mpc512x_buff_descs) + 0x1f);
 
 	/*
@@ -691,12 +691,12 @@ int mpc512x_fec_initialize (bd_t * bis)
 
 /* MII-interface related functions */
 /********************************************************************/
-int fec512x_miiphy_read (char *devname, uint8 phyAddr, uint8 regAddr, uint16 * retVal)
+int fec512x_miiphy_read (char *devname, u8 phyAddr, u8 regAddr, u16 * retVal)
 {
 	volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
 	volatile fec512x_t *eth = &im->fec;
-	uint32 reg;		/* convenient holder for the PHY register */
-	uint32 phy;		/* convenient holder for the PHY */
+	u32 reg;		/* convenient holder for the PHY register */
+	u32 phy;		/* convenient holder for the PHY */
 	int timeout = 0xffff;
 
 	/*
@@ -732,18 +732,18 @@ int fec512x_miiphy_read (char *devname, uint8 phyAddr, uint8 regAddr, uint16 * r
 	/*
 	 * it's now safe to read the PHY's register
 	 */
-	*retVal = (uint16) in_be32(&eth->mii_data);
+	*retVal = (u16) in_be32(&eth->mii_data);
 
 	return 0;
 }
 
 /********************************************************************/
-int fec512x_miiphy_write (char *devname, uint8 phyAddr, uint8 regAddr, uint16 data)
+int fec512x_miiphy_write (char *devname, u8 phyAddr, u8 regAddr, u16 data)
 {
 	volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
 	volatile fec512x_t *eth = &im->fec;
-	uint32 reg;		/* convenient holder for the PHY register */
-	uint32 phy;		/* convenient holder for the PHY */
+	u32 reg;		/* convenient holder for the PHY register */
+	u32 phy;		/* convenient holder for the PHY */
 	int timeout = 0xffff;
 
 	reg = regAddr << FEC_MII_DATA_RA_SHIFT;
@@ -776,7 +776,7 @@ int fec512x_miiphy_write (char *devname, uint8 phyAddr, uint8 regAddr, uint16 da
 }
 
 #if (DEBUG & 0x40)
-static uint32 local_crc32 (char *string, unsigned int crc_value, int len)
+static u32 local_crc32 (char *string, unsigned int crc_value, int len)
 {
 	int i;
 	char c;
diff --git a/drivers/net/mpc512x_fec.h b/drivers/net/mpc512x_fec.h
index f24f529..a083cca 100644
--- a/drivers/net/mpc512x_fec.h
+++ b/drivers/net/mpc512x_fec.h
@@ -9,23 +9,18 @@
 #define __MPC512X_FEC_H
 
 #include <common.h>
-#include <mpc512x.h>
-
-typedef unsigned long uint32;
-typedef unsigned short uint16;
-typedef unsigned char uint8;
 
 /* Receive & Transmit Buffer Descriptor definitions */
 typedef struct BufferDescriptor {
-	uint16 status;
-	uint16 dataLength;
-	uint32 dataPointer;
+	u16 status;
+	u16 dataLength;
+	u32 dataPointer;
 } FEC_RBD;
 
 typedef struct {
-	uint16 status;
-	uint16 dataLength;
-	uint32 dataPointer;
+	u16 status;
+	u16 dataLength;
+	u32 dataPointer;
 } FEC_TBD;
 
 /* private structure */
@@ -46,7 +41,7 @@ typedef enum {
 #define FEC_BUFFER_SIZE		((FEC_MAX_FRAME_LEN + 0x10) & (~0xf))
 
 typedef struct {
-	uint8 frame[FEC_BUFFER_SIZE];
+	u8 frame[FEC_BUFFER_SIZE];
 } mpc512x_frame;
 
 typedef struct {
@@ -59,10 +54,10 @@ typedef struct {
 	volatile fec512x_t *eth;
 	xceiver_type xcv_type;		/* transceiver type */
 	mpc512x_buff_descs *bdBase;	/* BD rings and recv buffer */
-	uint16 rbdIndex;		/* next receive BD to read */
-	uint16 tbdIndex;		/* next transmit BD to send */
-	uint16 usedTbdIndex;		/* next transmit BD to clean */
-	uint16 cleanTbdNum;		/* the number of available transmit BDs */
+	u16 rbdIndex;			/* next receive BD to read */
+	u16 tbdIndex;			/* next transmit BD to send */
+	u16 usedTbdIndex;		/* next transmit BD to clean */
+	u16 cleanTbdNum;		/* the number of available transmit BDs */
 } mpc512x_fec_priv;
 
 /* RBD bits definitions */
diff --git a/include/asm-ppc/immap_512x.h b/include/asm-ppc/immap_512x.h
index bd40c04..444e028 100644
--- a/include/asm-ppc/immap_512x.h
+++ b/include/asm-ppc/immap_512x.h
@@ -25,7 +25,28 @@
 #define __IMMAP_512x__
 
 #include <asm/types.h>
+#if defined(CONFIG_E300)
+#include <asm/e300.h>
+#endif
 
+/*
+ * System reset offset (PowerPC standard)
+ */
+#define EXC_OFF_SYS_RESET	0x0100
+#define	_START_OFFSET		EXC_OFF_SYS_RESET
+
+#define SPR_5121E		0x80180000
+
+/*
+ * IMMRBAR - Internal Memory Register Base Address
+ */
+#define CONFIG_DEFAULT_IMMR	0xFF400000	/* Default IMMR base address */
+#define IMMRBAR			0x0000		/* Register offset to immr */
+#define IMMRBAR_BASE_ADDR	0xFFF00000	/* Base address mask */
+#define IMMRBAR_RES		~(IMMRBAR_BASE_ADDR)
+
+
+#ifndef __ASSEMBLY__
 typedef struct law512x {
 	u32 bar;	/* Base Addr Register */
 	u32 ar;		/* Attributes Register */
@@ -60,6 +81,8 @@ typedef struct sysconf512x {
 	u8 res5[0xf8];
 } sysconf512x_t;
 
+#define LAWBAR_BAR	0xFFFFF000	/* Base address mask */
+
 /*
  * Watch Dog Timer (WDT) Registers
  */
@@ -124,6 +147,34 @@ typedef struct reset512x {
 	u8 res1[0xDC];
 } reset512x_t;
 
+/* RSR - Reset Status Register */
+#define RSR_SWSR	0x00002000	/* software soft reset */
+#define RSR_SWHR	0x00001000	/* software hard reset */
+#define RSR_JHRS	0x00000200	/* jtag hreset */
+#define RSR_JSRS	0x00000100	/* jtag sreset status */
+#define RSR_CSHR	0x00000010	/* checkstop reset status */
+#define RSR_SWRS	0x00000008	/* software watchdog reset status */
+#define RSR_BMRS	0x00000004	/* bus monitop reset status */
+#define RSR_SRS		0x00000002	/* soft reset status */
+#define RSR_HRS		0x00000001	/* hard reset status */
+#define RSR_RES		~(RSR_SWSR | RSR_SWHR |\
+			 RSR_JHRS | RSR_JSRS | RSR_CSHR | RSR_SWRS |\
+			 RSR_BMRS | RSR_SRS | RSR_HRS)
+
+/* RMR - Reset Mode Register */
+#define RMR_CSRE	0x00000001	/* checkstop reset enable */
+#define RMR_CSRE_SHIFT	0
+#define RMR_RES		(~(RMR_CSRE))
+
+/* RCR - Reset Control Register */
+#define RCR_SWHR	0x00000002	/* software hard reset */
+#define RCR_SWSR	0x00000001	/* software soft reset */
+#define RCR_RES		(~(RCR_SWHR | RCR_SWSR))
+
+/* RCER - Reset Control Enable Register */
+#define RCER_CRE	0x00000001	/* software hard reset */
+#define RCER_RES	(~(RCER_CRE))
+
 /*
  * Clock Module
  */
@@ -140,6 +191,56 @@ typedef struct clk512x {
 	u8 res1[0xa8];
 } clk512x_t;
 
+/* SPMR - System PLL Mode Register */
+#define SPMR_SPMF		0x0F000000
+#define SPMR_SPMF_SHIFT		24
+#define SPMR_CPMF		0x000F0000
+#define SPMR_CPMF_SHIFT		16
+
+/* System Clock Control Register 1 commands */
+#define CLOCK_SCCR1_CFG_EN		0x80000000
+#define CLOCK_SCCR1_LPC_EN		0x40000000
+#define CLOCK_SCCR1_NFC_EN		0x20000000
+#define CLOCK_SCCR1_PATA_EN		0x10000000
+#define CLOCK_SCCR1_PSC_EN(cn)		(0x08000000 >> (cn))
+#define CLOCK_SCCR1_PSCFIFO_EN		0x00008000
+#define CLOCK_SCCR1_SATA_EN		0x00004000
+#define CLOCK_SCCR1_FEC_EN		0x00002000
+#define CLOCK_SCCR1_TPR_EN		0x00001000
+#define CLOCK_SCCR1_PCI_EN		0x00000800
+#define CLOCK_SCCR1_DDR_EN		0x00000400
+
+/* System Clock Control Register 2 commands */
+#define CLOCK_SCCR2_DIU_EN		0x80000000
+#define CLOCK_SCCR2_AXE_EN		0x40000000
+#define CLOCK_SCCR2_MEM_EN		0x20000000
+#define CLOCK_SCCR2_USB2_EN		0x10000000
+#define CLOCK_SCCR2_USB1_EN		0x08000000
+#define CLOCK_SCCR2_I2C_EN		0x04000000
+#define CLOCK_SCCR2_BDLC_EN		0x02000000
+#define CLOCK_SCCR2_SDHC_EN		0x01000000
+#define CLOCK_SCCR2_SPDIF_EN		0x00800000
+#define CLOCK_SCCR2_MBX_BUS_EN		0x00400000
+#define CLOCK_SCCR2_MBX_EN		0x00200000
+#define CLOCK_SCCR2_MBX_3D_EN		0x00100000
+#define CLOCK_SCCR2_IIM_EN		0x00080000
+
+/* SCFR1 System Clock Frequency Register 1 */
+#define SCFR1_IPS_DIV		0x3
+#define SCFR1_IPS_DIV_MASK	0x03800000
+#define SCFR1_IPS_DIV_SHIFT	23
+
+#define SCFR1_PCI_DIV		0x6
+#define SCFR1_PCI_DIV_MASK	0x00700000
+#define SCFR1_PCI_DIV_SHIFT	20
+
+/* SCFR2 System Clock Frequency Register 2 */
+#define SCFR2_SYS_DIV		0xFC000000
+#define SCFR2_SYS_DIV_SHIFT	26
+
+/* SPCR - System Priority Configuration Register */
+#define SPCR_TBEN	0x00400000	/* E300 core time base unit enable */
+
 /*
  * Power Management Control Module
  */
@@ -266,6 +367,40 @@ typedef struct pci_outbound_window {
 	u8 res2[4];
 } pot512x_t;
 
+/* POTAR - PCI Outbound Translation Address Register */
+#define POTAR_TA_MASK	0x000fffff
+
+/* POBAR - PCI Outbound Base Address Register */
+#define POBAR_BA_MASK	0x000fffff
+
+/* POCMR - PCI Outbound Comparision Mask Register */
+#define POCMR_EN	0x80000000
+#define POCMR_IO	0x40000000	/* 0-memory space 1-I/O space */
+#define POCMR_PRE	0x20000000	/* prefetch enable */
+#define POCMR_SBS	0x00100000	/* special byte swap enable */
+#define POCMR_CM_MASK	0x000fffff
+#define POCMR_CM_4G	0x00000000
+#define POCMR_CM_2G	0x00080000
+#define POCMR_CM_1G	0x000C0000
+#define POCMR_CM_512M	0x000E0000
+#define POCMR_CM_256M	0x000F0000
+#define POCMR_CM_128M	0x000F8000
+#define POCMR_CM_64M	0x000FC000
+#define POCMR_CM_32M	0x000FE000
+#define POCMR_CM_16M	0x000FF000
+#define POCMR_CM_8M	0x000FF800
+#define POCMR_CM_4M	0x000FFC00
+#define POCMR_CM_2M	0x000FFE00
+#define POCMR_CM_1M	0x000FFF00
+#define POCMR_CM_512K	0x000FFF80
+#define POCMR_CM_256K	0x000FFFC0
+#define POCMR_CM_128K	0x000FFFE0
+#define POCMR_CM_64K	0x000FFFF0
+#define POCMR_CM_32K	0x000FFFF8
+#define POCMR_CM_16K	0x000FFFFC
+#define POCMR_CM_8K	0x000FFFFE
+#define POCMR_CM_4K	0x000FFFFF
+
 /*
  * Sequencer
  */
@@ -315,6 +450,27 @@ typedef struct pcictrl512x {
 } pcictrl512x_t;
 
 
+/* PITAR - PCI Inbound Translation Address Register
+ */
+#define PITAR_TA_MASK	0x000fffff
+
+/* PIBAR - PCI Inbound Base/Extended Address Register
+ */
+#define PIBAR_MASK	0xffffffff
+#define PIEBAR_EBA_MASK	0x000fffff
+
+/* PIWAR - PCI Inbound Windows Attributes Register
+ */
+#define PIWAR_EN	0x80000000
+#define PIWAR_SBS	0x40000000
+#define PIWAR_PF	0x20000000
+#define PIWAR_RTT_MASK	0x000f0000
+#define PIWAR_RTT_NO_SNOOP 0x00040000
+#define PIWAR_RTT_SNOOP	0x00050000
+#define PIWAR_WTT_MASK	0x0000f000
+#define PIWAR_WTT_NO_SNOOP 0x00004000
+#define PIWAR_WTT_SNOOP	0x00005000
+
 /*
  * MSCAN
  */
@@ -355,13 +511,34 @@ typedef struct i2c512x_dev {
 	u8 res0[0x0C];
 } i2c512x_dev_t;
 
+/* Number of I2C buses */
+#define I2C_BUS_CNT	3
+
 typedef struct i2c512x {
-	i2c512x_dev_t dev[3];
+	i2c512x_dev_t dev[I2C_BUS_CNT];
 	volatile u32 icr;
 	volatile u32 mifr;
 	u8 res0[0x98];
 } i2c512x_t;
 
+/* I2Cn control register bits */
+#define I2C_EN		0x80
+#define I2C_IEN		0x40
+#define I2C_STA		0x20
+#define I2C_TX		0x10
+#define I2C_TXAK	0x08
+#define I2C_RSTA	0x04
+#define I2C_INIT_MASK	(I2C_EN | I2C_STA | I2C_TX | I2C_RSTA)
+
+/* I2Cn status register bits */
+#define I2C_CF		0x80
+#define I2C_AAS		0x40
+#define I2C_BB		0x20
+#define I2C_AL		0x10
+#define I2C_SRW		0x04
+#define I2C_IF		0x02
+#define I2C_RXAK	0x01
+
 /*
  * AXE
  */
@@ -653,6 +830,27 @@ typedef struct ioctrl512x {
 	u8	reserved[0x0cfc];		/* fill to 4096 bytes size */
 } ioctrl512x_t;
 
+/* Indexes in regs array */
+/* Set for DDR */
+#define IOCTRL_MUX_DDR		0x00000036
+
+/* IO pin fields */
+#define IO_PIN_FMUX(v)	((v) << 7)	/* pin function */
+#define IO_PIN_HOLD(v)	((v) << 5)	/* hold time, pci only */
+#define IO_PIN_PUD(v)	((v) << 4)	/* if PUE, 0=pull-down, 1=pull-up */
+#define IO_PIN_PUE(v)	((v) << 3)	/* pull up/down enable */
+#define IO_PIN_ST(v)	((v) << 2)	/* schmitt trigger */
+#define IO_PIN_DS(v)	((v))		/* slew rate */
+
+typedef struct iopin_t {
+	int p_offset;		/* offset from IOCTL_MEM_OFFSET */
+	int nr_pins;		/* number of pins to set this way */
+	int bit_or;		/* or in the value instead of overwrite */
+	u_long val;		/* value to write or or */
+}iopin_t;
+
+void iopin_initialize(iopin_t *,int);
+
 /*
  * IIM
  */
@@ -834,6 +1032,51 @@ typedef struct psc512x {
 #define rfdata_32	rfdata_buffer.buffer_32
 } psc512x_t;
 
+/* PSC FIFO Command values */
+#define PSC_FIFO_RESET_SLICE		0x80
+#define PSC_FIFO_ENABLE_SLICE		0x01
+
+/* PSC FIFO Controller Command values */
+#define FIFOC_ENABLE_CLOCK_GATE		0x01
+#define FIFOC_DISABLE_CLOCK_GATE	0x00
+
+/* PSC FIFO status */
+#define PSC_FIFO_EMPTY			0x01
+
+/* PSC Command values */
+#define PSC_RX_ENABLE		0x01
+#define PSC_RX_DISABLE		0x02
+#define PSC_TX_ENABLE		0x04
+#define PSC_TX_DISABLE		0x08
+#define PSC_SEL_MODE_REG_1	0x10
+#define PSC_RST_RX		0x20
+#define PSC_RST_TX		0x30
+#define PSC_RST_ERR_STAT	0x40
+#define PSC_RST_BRK_CHG_INT	0x50
+#define PSC_START_BRK		0x60
+#define PSC_STOP_BRK		0x70
+
+/* PSC status register bits */
+#define PSC_SR_CDE		0x0080
+#define PSC_SR_TXEMP		0x0800
+#define PSC_SR_OE		0x1000
+#define PSC_SR_PE		0x2000
+#define PSC_SR_FE		0x4000
+#define PSC_SR_RB		0x8000
+
+/* PSC mode fields */
+#define PSC_MODE_5_BITS		0x00
+#define PSC_MODE_6_BITS		0x01
+#define PSC_MODE_7_BITS		0x02
+#define PSC_MODE_8_BITS		0x03
+#define PSC_MODE_PAREVEN	0x00
+#define PSC_MODE_PARODD		0x04
+#define PSC_MODE_PARFORCE	0x08
+#define PSC_MODE_PARNONE	0x10
+#define PSC_MODE_ENTIMEOUT	0x20
+#define PSC_MODE_RXRTS		0x80
+#define PSC_MODE_1_STOPBIT	0x07
+
 /*
  * FIFOC
  */
@@ -847,6 +1090,76 @@ typedef struct fifoc512x {
 } fifoc512x_t;
 
 /*
+ * Centralized FIFO Controller has internal memory for all 12 PSCs FIFOs
+ *
+ * NOTE: individual PSC units are free to use whatever area (and size) of the
+ * FIFOC internal memory, so make sure memory areas for FIFO slices used by
+ * different PSCs do not overlap!
+ *
+ * Overall size of FIFOC memory is not documented in the MPC5121e RM, but
+ * tests indicate that it is 1024 words total.
+ */
+#define FIFOC_PSC0_TX_SIZE	0x0	/* number of 4-byte words for FIFO slice */
+#define FIFOC_PSC0_TX_ADDR	0x0
+#define FIFOC_PSC0_RX_SIZE	0x0
+#define FIFOC_PSC0_RX_ADDR	0x0
+
+#define FIFOC_PSC1_TX_SIZE	0x0
+#define FIFOC_PSC1_TX_ADDR	0x0
+#define FIFOC_PSC1_RX_SIZE	0x0
+#define FIFOC_PSC1_RX_ADDR	0x0
+
+#define FIFOC_PSC2_TX_SIZE	0x0
+#define FIFOC_PSC2_TX_ADDR	0x0
+#define FIFOC_PSC2_RX_SIZE	0x0
+#define FIFOC_PSC2_RX_ADDR	0x0
+
+#define FIFOC_PSC3_TX_SIZE	0x04
+#define FIFOC_PSC3_TX_ADDR	0x0
+#define FIFOC_PSC3_RX_SIZE	0x04
+#define FIFOC_PSC3_RX_ADDR	0x10
+
+#define FIFOC_PSC4_TX_SIZE	0x0
+#define FIFOC_PSC4_TX_ADDR	0x0
+#define FIFOC_PSC4_RX_SIZE	0x0
+#define FIFOC_PSC4_RX_ADDR	0x0
+
+#define FIFOC_PSC5_TX_SIZE	0x0
+#define FIFOC_PSC5_TX_ADDR	0x0
+#define FIFOC_PSC5_RX_SIZE	0x0
+#define FIFOC_PSC5_RX_ADDR	0x0
+
+#define FIFOC_PSC6_TX_SIZE	0x0
+#define FIFOC_PSC6_TX_ADDR	0x0
+#define FIFOC_PSC6_RX_SIZE	0x0
+#define FIFOC_PSC6_RX_ADDR	0x0
+
+#define FIFOC_PSC7_TX_SIZE	0x0
+#define FIFOC_PSC7_TX_ADDR	0x0
+#define FIFOC_PSC7_RX_SIZE	0x0
+#define FIFOC_PSC7_RX_ADDR	0x0
+
+#define FIFOC_PSC8_TX_SIZE	0x0
+#define FIFOC_PSC8_TX_ADDR	0x0
+#define FIFOC_PSC8_RX_SIZE	0x0
+#define FIFOC_PSC8_RX_ADDR	0x0
+
+#define FIFOC_PSC9_TX_SIZE	0x0
+#define FIFOC_PSC9_TX_ADDR	0x0
+#define FIFOC_PSC9_RX_SIZE	0x0
+#define FIFOC_PSC9_RX_ADDR	0x0
+
+#define FIFOC_PSC10_TX_SIZE	0x0
+#define FIFOC_PSC10_TX_ADDR	0x0
+#define FIFOC_PSC10_RX_SIZE	0x0
+#define FIFOC_PSC10_RX_ADDR	0x0
+
+#define FIFOC_PSC11_TX_SIZE	0x0
+#define FIFOC_PSC11_TX_ADDR	0x0
+#define FIFOC_PSC11_RX_SIZE	0x0
+#define FIFOC_PSC11_RX_ADDR	0x0
+
+/*
  * SATA
  */
 typedef struct sata512x {
@@ -903,4 +1216,13 @@ typedef struct immap {
 	sata512x_t		sata;		/* Serial ATA */
 	u8			res13[0xde000];
 } immap_t;
+
+/* provide interface to get PATA base address */
+static inline u32 get_pata_base (void)
+{
+	volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
+	return (u32)(&im->pata);
+}
+#endif	/* __ASSEMBLY__ */
+
 #endif /* __IMMAP_512x__ */
diff --git a/include/common.h b/include/common.h
index df0f5a0..4c00491 100644
--- a/include/common.h
+++ b/include/common.h
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2000-2007
+ * (C) Copyright 2000-2009
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
  * See file CREDITS for list of people who contributed to this
@@ -66,7 +66,6 @@ typedef volatile unsigned char	vu_char;
 #elif defined(CONFIG_MPC5xxx)
 #include <mpc5xxx.h>
 #elif defined(CONFIG_MPC512X)
-#include <mpc512x.h>
 #include <asm/immap_512x.h>
 #elif defined(CONFIG_MPC8220)
 #include <asm/immap_8220.h>
diff --git a/include/configs/mpc5121ads.h b/include/configs/mpc5121ads.h
index 9e3b0b7..dff7f1a 100644
--- a/include/configs/mpc5121ads.h
+++ b/include/configs/mpc5121ads.h
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2007, 2008 DENX Software Engineering
+ * (C) Copyright 2007-2009 DENX Software Engineering
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -519,7 +519,7 @@
 #define CONFIG_SYS_IDE_MAXDEVICE	2	/* max. 1 drive per IDE bus	*/
 
 #define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
-#define CONFIG_SYS_ATA_BASE_ADDR	MPC512X_PATA
+#define CONFIG_SYS_ATA_BASE_ADDR	get_pata_base()
 
 /* Offset for data I/O			RefMan MPC5121EE Table 28-10	*/
 #define CONFIG_SYS_ATA_DATA_OFFSET	(0x00A0)
@@ -533,7 +533,7 @@
 /* Interval between registers	*/
 #define CONFIG_SYS_ATA_STRIDE		4
 
-#define ATA_BASE_ADDR		MPC512X_PATA
+#define ATA_BASE_ADDR			get_pata_base()
 
 /*
  * Control register bit definitions
diff --git a/include/mpc512x.h b/include/mpc512x.h
deleted file mode 100644
index 0f02293..0000000
--- a/include/mpc512x.h
+++ /dev/null
@@ -1,702 +0,0 @@
-/*
- * Copyright (C) 2004-2006 Freescale Semiconductor, Inc.
- * (C) Copyright 2007 DENX Software Engineering
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * Derived from the MPC83xx header.
- */
-
-#ifndef __MPC512X_H__
-#define __MPC512X_H__
-
-#include <config.h>
-#if defined(CONFIG_E300)
-#include <asm/e300.h>
-#endif
-
-/* System reset offset (PowerPC standard)
- */
-#define EXC_OFF_SYS_RESET		0x0100
-#define	_START_OFFSET			EXC_OFF_SYS_RESET
-
-
-/* IMMRBAR - Internal Memory Register Base Address
- */
-#define CONFIG_DEFAULT_IMMR		0xFF400000	/* Default IMMR base address */
-#define IMMRBAR				0x0000		/* Register offset to immr */
-#define IMMRBAR_BASE_ADDR		0xFFF00000	/* Base address mask */
-#define IMMRBAR_RES			~(IMMRBAR_BASE_ADDR)
-
-/* LAWBAR - Local Access Window Base Address Register
- */
-#define LPBAW			0x0020		/* Register offset to immr */
-#define LPCS0AW			0x0024
-#define LPCS1AW			0x0028
-#define LPCS2AW			0x002C
-#define LPCS3AW			0x0030
-#define LPCS4AW			0x0034
-#define LPCS5AW			0x0038
-#define LPCS6AW			0x003C
-#define LPCA7AW			0x0040
-#define SRAMBAR			0x00C4
-#define LAWBAR_BAR		0xFFFFF000	/* Base address mask */
-
-#define LPC_OFFSET		0x10000
-
-#define CS0_CONFIG		0x00000
-#define CS1_CONFIG		0x00004
-#define CS2_CONFIG		0x00008
-#define CS3_CONFIG		0x0000C
-#define CS4_CONFIG		0x00010
-#define CS5_CONFIG		0x00014
-#define CS6_CONFIG		0x00018
-#define CS7_CONFIG		0x0001C
-#define CS_ALE_TIMING_CONFIG	0x00034
-
-#define CS_CTRL			0x00020
-#define CS_CTRL_ME		0x01000000	/* CS Master Enable bit */
-#define CS_CTRL_IE		0x08000000	/* CS Interrupt Enable bit */
-
-/* SPRIDR - System Part and Revision ID Register
- */
-#define SPRIDR_PARTID		0xFFFF0000	/* Part Identification */
-#define SPRIDR_REVID		0x0000FFFF	/* Revision Identification */
-
-#define SPR_5121E		0x80180000
-
-/* SPCR - System Priority Configuration Register
- */
-#define SPCR_PCIHPE			0x10000000	/* PCI Highest Priority Enable */
-#define SPCR_PCIHPE_SHIFT		(31-3)
-#define SPCR_PCIPR			0x03000000	/* PCI bridge system bus request priority */
-#define SPCR_PCIPR_SHIFT		(31-7)
-#define SPCR_TBEN			0x00400000	/* E300 PowerPC core time base unit enable */
-#define SPCR_TBEN_SHIFT			(31-9)
-#define SPCR_COREPR			0x00300000	/* E300 PowerPC Core system bus request priority */
-#define SPCR_COREPR_SHIFT		(31-11)
-
-/* SWCRR - System Watchdog Control Register
- */
-#define SWCRR				0x0904		/* Register offset to immr */
-#define SWCRR_SWTC			0xFFFF0000	/* Software Watchdog Time Count */
-#define SWCRR_SWEN			0x00000004	/* Watchdog Enable bit */
-#define SWCRR_SWRI			0x00000002	/* Software Watchdog Reset/Interrupt Select bit */
-#define SWCRR_SWPR			0x00000001	/* Software Watchdog Counter Prescale bit */
-#define SWCRR_RES			~(SWCRR_SWTC | SWCRR_SWEN | SWCRR_SWRI | SWCRR_SWPR)
-
-/* SWCNR - System Watchdog Counter Register
- */
-#define SWCNR				0x0908		/* Register offset to immr */
-#define SWCNR_SWCN			0x0000FFFF	/* Software Watchdog Count mask */
-#define SWCNR_RES			~(SWCNR_SWCN)
-
-/* SWSRR - System Watchdog Service Register
- */
-#define SWSRR				0x090E		/* Register offset to immr */
-
-/* ACR - Arbiter Configuration Register
- */
-#define ACR_COREDIS			0x10000000	/* Core disable */
-#define ACR_COREDIS_SHIFT		(31-7)
-#define ACR_PIPE_DEP			0x00070000	/* Pipeline depth */
-#define ACR_PIPE_DEP_SHIFT		(31-15)
-#define ACR_PCI_RPTCNT			0x00007000	/* PCI repeat count */
-#define ACR_PCI_RPTCNT_SHIFT		(31-19)
-#define ACR_RPTCNT			0x00000700	/* Repeat count */
-#define ACR_RPTCNT_SHIFT		(31-23)
-#define ACR_APARK			0x00000030	/* Address parking */
-#define ACR_APARK_SHIFT			(31-27)
-#define ACR_PARKM			0x0000000F	/* Parking master */
-#define ACR_PARKM_SHIFT			(31-31)
-
-/* ATR - Arbiter Timers Register
- */
-#define ATR_DTO				0x00FF0000	/* Data time out */
-#define ATR_ATO				0x000000FF	/* Address time out */
-
-/* AER - Arbiter Event Register
- */
-#define AER_ETEA			0x00000020	/* Transfer error */
-#define AER_RES				0x00000010	/* Reserved transfer type */
-#define AER_ECW				0x00000008	/* External control word transfer type */
-#define AER_AO				0x00000004	/* Address Only transfer type */
-#define AER_DTO				0x00000002	/* Data time out */
-#define AER_ATO				0x00000001	/* Address time out */
-
-/* AEATR - Arbiter Event Address Register
- */
-#define AEATR_EVENT			0x07000000	/* Event type */
-#define AEATR_MSTR_ID			0x001F0000	/* Master Id */
-#define AEATR_TBST			0x00000800	/* Transfer burst */
-#define AEATR_TSIZE			0x00000700	/* Transfer Size */
-#define AEATR_TTYPE			0x0000001F	/* Transfer Type */
-
-/* RSR - Reset Status Register
- */
-#define RSR_SWSR			0x00002000	/* software soft reset */
-#define RSR_SWSR_SHIFT			13
-#define RSR_SWHR			0x00001000	/* software hard reset */
-#define RSR_SWHR_SHIFT			12
-#define RSR_JHRS			0x00000200	/* jtag hreset */
-#define RSR_JHRS_SHIFT			9
-#define RSR_JSRS			0x00000100	/* jtag sreset status */
-#define RSR_JSRS_SHIFT			8
-#define RSR_CSHR			0x00000010	/* checkstop reset status */
-#define RSR_CSHR_SHIFT			4
-#define RSR_SWRS			0x00000008	/* software watchdog reset status */
-#define RSR_SWRS_SHIFT			3
-#define RSR_BMRS			0x00000004	/* bus monitop reset status */
-#define RSR_BMRS_SHIFT			2
-#define RSR_SRS				0x00000002	/* soft reset status */
-#define RSR_SRS_SHIFT			1
-#define RSR_HRS				0x00000001	/* hard reset status */
-#define RSR_HRS_SHIFT			0
-#define RSR_RES				~(RSR_SWSR | RSR_SWHR |\
-					 RSR_JHRS | RSR_JSRS | RSR_CSHR | RSR_SWRS |\
-					 RSR_BMRS | RSR_SRS | RSR_HRS)
-/* RMR - Reset Mode Register
- */
-#define RMR_CSRE			0x00000001	/* checkstop reset enable */
-#define RMR_CSRE_SHIFT			0
-#define RMR_RES				~(RMR_CSRE)
-
-/* RCR - Reset Control Register
- */
-#define RCR_SWHR			0x00000002	/* software hard reset */
-#define RCR_SWSR			0x00000001	/* software soft reset */
-#define RCR_RES				~(RCR_SWHR | RCR_SWSR)
-
-/* RCER - Reset Control Enable Register
- */
-#define RCER_CRE			0x00000001	/* software hard reset */
-#define RCER_RES			~(RCER_CRE)
-
-/* SPMR - System PLL Mode Register
- */
-#define SPMR_SPMF			0x0F000000
-#define SPMR_SPMF_SHIFT			24
-#define SPMR_CPMF			0x000F0000
-#define SPMR_CPMF_SHIFT			16
-
-/* SCFR1 System Clock Frequency Register 1
- */
-#define SCFR1_IPS_DIV			0x3
-#define SCFR1_IPS_DIV_MASK		0x03800000
-#define SCFR1_IPS_DIV_SHIFT		23
-
-#define SCFR1_PCI_DIV			0x6
-#define SCFR1_PCI_DIV_MASK		0x00700000
-#define SCFR1_PCI_DIV_SHIFT		20
-
-/* SCFR2 System Clock Frequency Register 2
- */
-#define SCFR2_SYS_DIV			0xFC000000
-#define SCFR2_SYS_DIV_SHIFT		26
-
-/* SCCR - System Clock Control Registers
- */
-
-/* System Clock Control Register 1 commands */
-#define CLOCK_SCCR1_CFG_EN		0x80000000
-#define CLOCK_SCCR1_LPC_EN		0x40000000
-#define CLOCK_SCCR1_NFC_EN		0x20000000
-#define CLOCK_SCCR1_PATA_EN		0x10000000
-#define CLOCK_SCCR1_PSC_EN(cn)		(0x08000000 >> (cn))
-#define CLOCK_SCCR1_PSCFIFO_EN		0x00008000
-#define CLOCK_SCCR1_SATA_EN		0x00004000
-#define CLOCK_SCCR1_FEC_EN		0x00002000
-#define CLOCK_SCCR1_TPR_EN		0x00001000
-#define CLOCK_SCCR1_PCI_EN		0x00000800
-#define CLOCK_SCCR1_DDR_EN		0x00000400
-
-/* System Clock Control Register 2 commands */
-#define CLOCK_SCCR2_DIU_EN		0x80000000
-#define CLOCK_SCCR2_AXE_EN		0x40000000
-#define CLOCK_SCCR2_MEM_EN		0x20000000
-#define CLOCK_SCCR2_USB2_EN		0x10000000
-#define CLOCK_SCCR2_USB1_EN		0x08000000
-#define CLOCK_SCCR2_I2C_EN		0x04000000
-#define CLOCK_SCCR2_BDLC_EN		0x02000000
-#define CLOCK_SCCR2_SDHC_EN		0x01000000
-#define CLOCK_SCCR2_SPDIF_EN		0x00800000
-#define CLOCK_SCCR2_MBX_BUS_EN		0x00400000
-#define CLOCK_SCCR2_MBX_EN		0x00200000
-#define CLOCK_SCCR2_MBX_3D_EN		0x00100000
-#define CLOCK_SCCR2_IIM_EN		0x00080000
-
-/* PSC FIFO Command values */
-#define PSC_FIFO_RESET_SLICE		0x80
-#define PSC_FIFO_ENABLE_SLICE		0x01
-
-/* PSC FIFO Controller Command values */
-#define FIFOC_ENABLE_CLOCK_GATE		0x01
-#define FIFOC_DISABLE_CLOCK_GATE	0x00
-
-/* PSC FIFO status */
-#define PSC_FIFO_EMPTY			0x01
-
-/* PSC Command values */
-#define PSC_RX_ENABLE		0x01
-#define PSC_RX_DISABLE		0x02
-#define PSC_TX_ENABLE		0x04
-#define PSC_TX_DISABLE		0x08
-#define PSC_SEL_MODE_REG_1	0x10
-#define PSC_RST_RX		0x20
-#define PSC_RST_TX		0x30
-#define PSC_RST_ERR_STAT	0x40
-#define PSC_RST_BRK_CHG_INT	0x50
-#define PSC_START_BRK		0x60
-#define PSC_STOP_BRK		0x70
-
-/* PSC status register bits */
-#define PSC_SR_CDE		0x0080
-#define PSC_SR_TXEMP		0x0800
-#define PSC_SR_OE		0x1000
-#define PSC_SR_PE		0x2000
-#define PSC_SR_FE		0x4000
-#define PSC_SR_RB		0x8000
-
-/* PSC mode fields */
-#define PSC_MODE_5_BITS		0x00
-#define PSC_MODE_6_BITS		0x01
-#define PSC_MODE_7_BITS		0x02
-#define PSC_MODE_8_BITS		0x03
-#define PSC_MODE_PAREVEN	0x00
-#define PSC_MODE_PARODD		0x04
-#define PSC_MODE_PARFORCE	0x08
-#define PSC_MODE_PARNONE	0x10
-#define PSC_MODE_ENTIMEOUT	0x20
-#define PSC_MODE_RXRTS		0x80
-#define PSC_MODE_1_STOPBIT	0x07
-
-/*
- * Centralized FIFO Controller has internal memory for all 12 PSCs FIFOs
- *
- * NOTE: individual PSC units are free to use whatever area (and size) of the
- * FIFOC internal memory, so make sure memory areas for FIFO slices used by
- * different PSCs do not overlap!
- *
- * Overall size of FIFOC memory is not documented in the MPC5121e RM, but
- * tests indicate that it is 1024 words total.
- */
-#define FIFOC_PSC0_TX_SIZE	0x0	/* number of 4-byte words for FIFO slice */
-#define FIFOC_PSC0_TX_ADDR	0x0
-#define FIFOC_PSC0_RX_SIZE	0x0
-#define FIFOC_PSC0_RX_ADDR	0x0
-
-#define FIFOC_PSC1_TX_SIZE	0x0
-#define FIFOC_PSC1_TX_ADDR	0x0
-#define FIFOC_PSC1_RX_SIZE	0x0
-#define FIFOC_PSC1_RX_ADDR	0x0
-
-#define FIFOC_PSC2_TX_SIZE	0x0
-#define FIFOC_PSC2_TX_ADDR	0x0
-#define FIFOC_PSC2_RX_SIZE	0x0
-#define FIFOC_PSC2_RX_ADDR	0x0
-
-#define FIFOC_PSC3_TX_SIZE	0x04
-#define FIFOC_PSC3_TX_ADDR	0x0
-#define FIFOC_PSC3_RX_SIZE	0x04
-#define FIFOC_PSC3_RX_ADDR	0x10
-
-#define FIFOC_PSC4_TX_SIZE	0x0
-#define FIFOC_PSC4_TX_ADDR	0x0
-#define FIFOC_PSC4_RX_SIZE	0x0
-#define FIFOC_PSC4_RX_ADDR	0x0
-
-#define FIFOC_PSC5_TX_SIZE	0x0
-#define FIFOC_PSC5_TX_ADDR	0x0
-#define FIFOC_PSC5_RX_SIZE	0x0
-#define FIFOC_PSC5_RX_ADDR	0x0
-
-#define FIFOC_PSC6_TX_SIZE	0x0
-#define FIFOC_PSC6_TX_ADDR	0x0
-#define FIFOC_PSC6_RX_SIZE	0x0
-#define FIFOC_PSC6_RX_ADDR	0x0
-
-#define FIFOC_PSC7_TX_SIZE	0x0
-#define FIFOC_PSC7_TX_ADDR	0x0
-#define FIFOC_PSC7_RX_SIZE	0x0
-#define FIFOC_PSC7_RX_ADDR	0x0
-
-#define FIFOC_PSC8_TX_SIZE	0x0
-#define FIFOC_PSC8_TX_ADDR	0x0
-#define FIFOC_PSC8_RX_SIZE	0x0
-#define FIFOC_PSC8_RX_ADDR	0x0
-
-#define FIFOC_PSC9_TX_SIZE	0x0
-#define FIFOC_PSC9_TX_ADDR	0x0
-#define FIFOC_PSC9_RX_SIZE	0x0
-#define FIFOC_PSC9_RX_ADDR	0x0
-
-#define FIFOC_PSC10_TX_SIZE	0x0
-#define FIFOC_PSC10_TX_ADDR	0x0
-#define FIFOC_PSC10_RX_SIZE	0x0
-#define FIFOC_PSC10_RX_ADDR	0x0
-
-#define FIFOC_PSC11_TX_SIZE	0x0
-#define FIFOC_PSC11_TX_ADDR	0x0
-#define FIFOC_PSC11_RX_SIZE	0x0
-#define FIFOC_PSC11_RX_ADDR	0x0
-
-/* IO Control Register
- */
-#define IOCTL_MEM		0x000
-#define IOCTL_GP		0x004
-#define IOCTL_LPC_CLK		0x008
-#define IOCTL_LPC_OE		0x00C
-#define IOCTL_LPC_RWB		0x010
-#define IOCTL_LPC_ACK		0x014
-#define IOCTL_LPC_CS0		0x018
-#define IOCTL_NFC_CE0		0x01C
-#define IOCTL_LPC_CS1		0x020
-#define IOCTL_LPC_CS2		0x024
-#define IOCTL_LPC_AX03		0x028
-#define IOCTL_EMB_AX02		0x02C
-#define IOCTL_EMB_AX01		0x030
-#define IOCTL_EMB_AX00		0x034
-#define IOCTL_EMB_AD31		0x038
-#define IOCTL_EMB_AD30		0x03C
-#define IOCTL_EMB_AD29		0x040
-#define IOCTL_EMB_AD28		0x044
-#define IOCTL_EMB_AD27		0x048
-#define IOCTL_EMB_AD26		0x04C
-#define IOCTL_EMB_AD25		0x050
-#define IOCTL_EMB_AD24		0x054
-#define IOCTL_EMB_AD23		0x058
-#define IOCTL_EMB_AD22		0x05C
-#define IOCTL_EMB_AD21		0x060
-#define IOCTL_EMB_AD20		0x064
-#define IOCTL_EMB_AD19		0x068
-#define IOCTL_EMB_AD18		0x06C
-#define IOCTL_EMB_AD17		0x070
-#define IOCTL_EMB_AD16		0x074
-#define IOCTL_EMB_AD15		0x078
-#define IOCTL_EMB_AD14		0x07C
-#define IOCTL_EMB_AD13		0x080
-#define IOCTL_EMB_AD12		0x084
-#define IOCTL_EMB_AD11		0x088
-#define IOCTL_EMB_AD10		0x08C
-#define IOCTL_EMB_AD09		0x090
-#define IOCTL_EMB_AD08		0x094
-#define IOCTL_EMB_AD07		0x098
-#define IOCTL_EMB_AD06		0x09C
-#define IOCTL_EMB_AD05		0x0A0
-#define IOCTL_EMB_AD04		0x0A4
-#define IOCTL_EMB_AD03		0x0A8
-#define IOCTL_EMB_AD02		0x0AC
-#define IOCTL_EMB_AD01		0x0B0
-#define IOCTL_EMB_AD00		0x0B4
-#define IOCTL_PATA_CE1		0x0B8
-#define IOCTL_PATA_CE2		0x0BC
-#define IOCTL_PATA_ISOLATE	0x0C0
-#define IOCTL_PATA_IOR		0x0C4
-#define IOCTL_PATA_IOW		0x0C8
-#define IOCTL_PATA_IOCHRDY	0x0CC
-#define IOCTL_PATA_INTRQ	0x0D0
-#define IOCTL_PATA_DRQ		0x0D4
-#define IOCTL_PATA_DACK		0x0D8
-#define IOCTL_NFC_WP		0x0DC
-#define IOCTL_NFC_RB		0x0E0
-#define IOCTL_NFC_ALE		0x0E4
-#define IOCTL_NFC_CLE		0x0E8
-#define IOCTL_NFC_WE		0x0EC
-#define IOCTL_NFC_RE		0x0F0
-#define IOCTL_PCI_AD31		0x0F4
-#define IOCTL_PCI_AD30		0x0F8
-#define IOCTL_PCI_AD29		0x0FC
-#define IOCTL_PCI_AD28		0x100
-#define IOCTL_PCI_AD27		0x104
-#define IOCTL_PCI_AD26		0x108
-#define IOCTL_PCI_AD25		0x10C
-#define IOCTL_PCI_AD24		0x110
-#define IOCTL_PCI_AD23		0x114
-#define IOCTL_PCI_AD22		0x118
-#define IOCTL_PCI_AD21		0x11C
-#define IOCTL_PCI_AD20		0x120
-#define IOCTL_PCI_AD19		0x124
-#define IOCTL_PCI_AD18		0x128
-#define IOCTL_PCI_AD17		0x12C
-#define IOCTL_PCI_AD16		0x130
-#define IOCTL_PCI_AD15		0x134
-#define IOCTL_PCI_AD14		0x138
-#define IOCTL_PCI_AD13		0x13C
-#define IOCTL_PCI_AD12		0x140
-#define IOCTL_PCI_AD11		0x144
-#define IOCTL_PCI_AD10		0x148
-#define IOCTL_PCI_AD09		0x14C
-#define IOCTL_PCI_AD08		0x150
-#define IOCTL_PCI_AD07		0x154
-#define IOCTL_PCI_AD06		0x158
-#define IOCTL_PCI_AD05		0x15C
-#define IOCTL_PCI_AD04		0x160
-#define IOCTL_PCI_AD03		0x164
-#define IOCTL_PCI_AD02		0x168
-#define IOCTL_PCI_AD01		0x16C
-#define IOCTL_PCI_AD00		0x170
-#define IOCTL_PCI_CBE0		0x174
-#define IOCTL_PCI_CBE1		0x178
-#define IOCTL_PCI_CBE2		0x17C
-#define IOCTL_PCI_CBE3		0x180
-#define IOCTL_PCI_GNT2		0x184
-#define IOCTL_PCI_REQ2		0x188
-#define IOCTL_PCI_GNT1		0x18C
-#define IOCTL_PCI_REQ1		0x190
-#define IOCTL_PCI_GNT0		0x194
-#define IOCTL_PCI_REQ0		0x198
-#define IOCTL_PCI_INTA		0x19C
-#define IOCTL_PCI_CLK		0x1A0
-#define IOCTL_PCI_RST_OUT	0x1A4
-#define IOCTL_PCI_FRAME		0x1A8
-#define IOCTL_PCI_IDSEL		0x1AC
-#define IOCTL_PCI_DEVSEL	0x1B0
-#define IOCTL_PCI_IRDY		0x1B4
-#define IOCTL_PCI_TRDY		0x1B8
-#define IOCTL_PCI_STOP		0x1BC
-#define IOCTL_PCI_PAR		0x1C0
-#define IOCTL_PCI_PERR		0x1C4
-#define IOCTL_PCI_SERR		0x1C8
-#define IOCTL_SPDIF_TXCLK	0x1CC
-#define IOCTL_SPDIF_TX		0x1D0
-#define IOCTL_SPDIF_RX		0x1D4
-#define IOCTL_I2C0_SCL		0x1D8
-#define IOCTL_I2C0_SDA		0x1DC
-#define IOCTL_I2C1_SCL		0x1E0
-#define IOCTL_I2C1_SDA		0x1E4
-#define IOCTL_I2C2_SCL		0x1E8
-#define IOCTL_I2C2_SDA		0x1EC
-#define IOCTL_IRQ0		0x1F0
-#define IOCTL_IRQ1		0x1F4
-#define IOCTL_CAN1_TX		0x1F8
-#define IOCTL_CAN2_TX		0x1FC
-#define IOCTL_J1850_TX		0x200
-#define IOCTL_J1850_RX		0x204
-#define IOCTL_PSC_MCLK_IN	0x208
-#define IOCTL_PSC0_0		0x20C
-#define IOCTL_PSC0_1		0x210
-#define IOCTL_PSC0_2		0x214
-#define IOCTL_PSC0_3		0x218
-#define IOCTL_PSC0_4		0x21C
-#define IOCTL_PSC1_0		0x220
-#define IOCTL_PSC1_1		0x224
-#define IOCTL_PSC1_2		0x228
-#define IOCTL_PSC1_3		0x22C
-#define IOCTL_PSC1_4		0x230
-#define IOCTL_PSC2_0		0x234
-#define IOCTL_PSC2_1		0x238
-#define IOCTL_PSC2_2		0x23C
-#define IOCTL_PSC2_3		0x240
-#define IOCTL_PSC2_4		0x244
-#define IOCTL_PSC3_0		0x248
-#define IOCTL_PSC3_1		0x24C
-#define IOCTL_PSC3_2		0x250
-#define IOCTL_PSC3_3		0x254
-#define IOCTL_PSC3_4		0x258
-#define IOCTL_PSC4_0		0x25C
-#define IOCTL_PSC4_1		0x260
-#define IOCTL_PSC4_2		0x264
-#define IOCTL_PSC4_3		0x268
-#define IOCTL_PSC4_4		0x26C
-#define IOCTL_PSC5_0		0x270
-#define IOCTL_PSC5_1		0x274
-#define IOCTL_PSC5_2		0x278
-#define IOCTL_PSC5_3		0x27C
-#define IOCTL_PSC5_4		0x280
-#define IOCTL_PSC6_0		0x284
-#define IOCTL_PSC6_1		0x288
-#define IOCTL_PSC6_2		0x28C
-#define IOCTL_PSC6_3		0x290
-#define IOCTL_PSC6_4		0x294
-#define IOCTL_PSC7_0		0x298
-#define IOCTL_PSC7_1		0x29C
-#define IOCTL_PSC7_2		0x2A0
-#define IOCTL_PSC7_3		0x2A4
-#define IOCTL_PSC7_4		0x2A8
-#define IOCTL_PSC8_0		0x2AC
-#define IOCTL_PSC8_1		0x2B0
-#define IOCTL_PSC8_2		0x2B4
-#define IOCTL_PSC8_3		0x2B8
-#define IOCTL_PSC8_4		0x2BC
-#define IOCTL_PSC9_0		0x2C0
-#define IOCTL_PSC9_1		0x2C4
-#define IOCTL_PSC9_2		0x2C8
-#define IOCTL_PSC9_3		0x2CC
-#define IOCTL_PSC9_4		0x2D0
-#define IOCTL_PSC10_0		0x2D4
-#define IOCTL_PSC10_1		0x2D8
-#define IOCTL_PSC10_2		0x2DC
-#define IOCTL_PSC10_3		0x2E0
-#define IOCTL_PSC10_4		0x2E4
-#define IOCTL_PSC11_0		0x2E8
-#define IOCTL_PSC11_1		0x2EC
-#define IOCTL_PSC11_2		0x2F0
-#define IOCTL_PSC11_3		0x2F4
-#define IOCTL_PSC11_4		0x2F8
-#define IOCTL_HRESET		0x2FC
-#define IOCTL_SRESET		0x300
-#define IOCTL_CKSTP_OUT		0x304
-#define IOCTL_USB2_VBUS_PWR_FAULT	0x308
-#define IOCTL_USB2_VBUS_PWR_SELECT	0x30C
-#define IOCTL_USB2_PHY_DRVV_BUS		0x310
-
-#ifndef __ASSEMBLY__
-
-
-/* IO pin fields */
-#define IO_PIN_FMUX(v)	((v) << 7)	/* pin function */
-#define IO_PIN_HOLD(v)	((v) << 5)	/* hold time, pci only */
-#define IO_PIN_PUD(v)	((v) << 4)	/* if PUE, 0=pull-down, 1=pull-up */
-#define IO_PIN_PUE(v)	((v) << 3)	/* pull up/down enable */
-#define IO_PIN_ST(v)	((v) << 2)	/* schmitt trigger */
-#define IO_PIN_DS(v)	((v))		/* slew rate */
-
-typedef struct iopin_t {
-	int p_offset;		/* offset from IOCTL_MEM_OFFSET */
-	int nr_pins;		/* number of pins to set this way */
-	int bit_or;		/* or in the value instead of overwrite */
-	u_long val;		/* value to write or or */
-}iopin_t;
-
-void iopin_initialize(iopin_t *,int);
-#endif
-
-/* Indexes in regs array */
-/* Set for DDR */
-#define IOCTRL_MUX_DDR		0x00000036
-
- /* Register Offset Base */
-#define MPC512X_FEC		(CONFIG_SYS_IMMR + 0x02800)
-#define MPC512X_PATA		(CONFIG_SYS_IMMR + 0x10200)
-
-/* IIM control */
-#define IIM_SET_UA(bk, f)	((bk << 3) | (f >> 5))
-#define IIM_SET_LA(f, bit)	(((f & 0x0000001f) << 3) | bit)
-#define IIM_STAT_BUSY		0x00000080
-#define IIM_STAT_PRGD		0x00000002
-#define IIM_STAT_SNSD		0x00000001
-#define IIM_ERR_WPE		0x00000040
-#define IIM_ERR_OPE		0x00000020
-#define IIM_ERR_RPE		0x00000010
-#define IIM_ERR_WLRE		0x00000008
-#define IIM_ERR_SNSE		0x00000004
-#define IIM_ERR_PARITYE		0x00000002
-#define IIM_PRG_P_SET		0x000000aa
-#define IIM_PRG_P_UNSET		0
-#define IIM_FCTL_PROG_PULSE	0x00000020
-#define IIM_FCTL_PROG		0x00000001
-#define IIM_FCTL_ESNS_N		0x00000008
-#define	IIM_FBAC_FBWP		0x00000080
-#define IIM_FBAC_FBOP		0x00000040
-#define IIM_FBAC_FBRP		0x00000020
-#define	IIM_FBAC_FBESP		0x00000008
-#define IIM_PROTECTION		0x000000e8
-#define IIM_FMAX			31
-
-/* Number of I2C buses */
-#define I2C_BUS_CNT	3
-
-/* I2Cn control register bits */
-#define I2C_EN		0x80
-#define I2C_IEN		0x40
-#define I2C_STA		0x20
-#define I2C_TX		0x10
-#define I2C_TXAK	0x08
-#define I2C_RSTA	0x04
-#define I2C_INIT_MASK	(I2C_EN | I2C_STA | I2C_TX | I2C_RSTA)
-
-/* I2Cn status register bits */
-#define I2C_CF		0x80
-#define I2C_AAS		0x40
-#define I2C_BB		0x20
-#define I2C_AL		0x10
-#define I2C_SRW		0x04
-#define I2C_IF		0x02
-#define I2C_RXAK	0x01
-
-/* POTAR - PCI Outbound Translation Address Register
- */
-#define POTAR_TA_MASK			0x000fffff
-
-/* POBAR - PCI Outbound Base Address Register
- */
-#define POBAR_BA_MASK			0x000fffff
-
-/* POCMR - PCI Outbound Comparision Mask Register
- */
-#define POCMR_EN	0x80000000
-#define POCMR_IO	0x40000000	/* 0-memory space 1-I/O space */
-#define POCMR_PRE	0x20000000	/* prefetch enable */
-#define POCMR_SBS	0x00100000	/* special byte swap enable */
-#define POCMR_CM_MASK	0x000fffff
-#define POCMR_CM_4G	0x00000000
-#define POCMR_CM_2G	0x00080000
-#define POCMR_CM_1G	0x000C0000
-#define POCMR_CM_512M	0x000E0000
-#define POCMR_CM_256M	0x000F0000
-#define POCMR_CM_128M	0x000F8000
-#define POCMR_CM_64M	0x000FC000
-#define POCMR_CM_32M	0x000FE000
-#define POCMR_CM_16M	0x000FF000
-#define POCMR_CM_8M	0x000FF800
-#define POCMR_CM_4M	0x000FFC00
-#define POCMR_CM_2M	0x000FFE00
-#define POCMR_CM_1M	0x000FFF00
-#define POCMR_CM_512K	0x000FFF80
-#define POCMR_CM_256K	0x000FFFC0
-#define POCMR_CM_128K	0x000FFFE0
-#define POCMR_CM_64K	0x000FFFF0
-#define POCMR_CM_32K	0x000FFFF8
-#define POCMR_CM_16K	0x000FFFFC
-#define POCMR_CM_8K	0x000FFFFE
-#define POCMR_CM_4K	0x000FFFFF
-
-/* PITAR - PCI Inbound Translation Address Register
- */
-#define PITAR_TA_MASK			0x000fffff
-
-/* PIBAR - PCI Inbound Base/Extended Address Register
- */
-#define PIBAR_MASK			0xffffffff
-#define PIEBAR_EBA_MASK			0x000fffff
-
-/* PIWAR - PCI Inbound Windows Attributes Register
- */
-#define PIWAR_EN			0x80000000
-#define PIWAR_SBS			0x40000000
-#define PIWAR_PF			0x20000000
-#define PIWAR_RTT_MASK			0x000f0000
-#define PIWAR_RTT_NO_SNOOP		0x00040000
-#define PIWAR_RTT_SNOOP			0x00050000
-#define PIWAR_WTT_MASK			0x0000f000
-#define PIWAR_WTT_NO_SNOOP		0x00004000
-#define PIWAR_WTT_SNOOP			0x00005000
-#define PIWAR_IWS_MASK			0x0000003F
-#define PIWAR_IWS_4K			0x0000000B
-#define PIWAR_IWS_8K			0x0000000C
-#define PIWAR_IWS_16K			0x0000000D
-#define PIWAR_IWS_32K			0x0000000E
-#define PIWAR_IWS_64K			0x0000000F
-#define PIWAR_IWS_128K			0x00000010
-#define PIWAR_IWS_256K			0x00000011
-#define PIWAR_IWS_512K			0x00000012
-#define PIWAR_IWS_1M			0x00000013
-#define PIWAR_IWS_2M			0x00000014
-#define PIWAR_IWS_4M			0x00000015
-#define PIWAR_IWS_8M			0x00000016
-#define PIWAR_IWS_16M			0x00000017
-#define PIWAR_IWS_32M			0x00000018
-#define PIWAR_IWS_64M			0x00000019
-#define PIWAR_IWS_128M			0x0000001A
-#define PIWAR_IWS_256M			0x0000001B
-#define PIWAR_IWS_512M			0x0000001C
-#define PIWAR_IWS_1G			0x0000001D
-#define PIWAR_IWS_2G			0x0000001E
-
-#endif	/* __MPC512X_H__ */