Add support for AMD's Pb1x00 eval board;

add MII routines to the au1x00 ethernet driver;
add USB ohci driver (work in progress)
Patch by Thomas Sailer, 20 Jan 2005

17 files changed, 3244 insertions, 91 deletions

diff --git a/CHANGELOG b/CHANGELOG
index b5a1918..6569616 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,11 @@
 Changes for U-Boot 1.1.4:
 ======================================================================
 
+* Add support for AMD's Pb1x00 eval board;
+  add MII routines to the au1x00 ethernet driver;
+  add USB ohci driver (work in progress)
+  Patch by Thomas Sailer, 20 Jan 2005
+
 * Update omap5912osk board
   Use drivers/cfi_flash.c instead of private flash driver;
   Remove hardcoded personalized settings from omap5912osk.h;
diff --git a/Makefile b/Makefile
index 7f7e114..c43cb2e 100644
--- a/Makefile
+++ b/Makefile
@@ -1646,6 +1646,11 @@ dbau1550_el_config	:	unconfig
 	@echo "#define CONFIG_DBAU1550 1" >>include/config.h
 	@./mkconfig -a dbau1x00 mips mips dbau1x00
 
+pb1000_config		: 	unconfig
+	@ >include/config.h
+	@echo "#define CONFIG_PB1000 1" >>include/config.h
+	@./mkconfig -a pb1x00 mips mips pb1x00
+
 #########################################################################
 ## MIPS64 5Kc
 #########################################################################
diff --git a/board/esd/cpci2dp/Makefile b/board/esd/cpci2dp/Makefile
index b067432..a60495a 100644
--- a/board/esd/cpci2dp/Makefile
+++ b/board/esd/cpci2dp/Makefile
@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
 
 LIB	= lib$(BOARD).a
 
-OBJS	= $(BOARD).o flash.o ../common/misc.o 
+OBJS	= $(BOARD).o flash.o ../common/misc.o
 
 $(LIB):	$(OBJS) $(SOBJS)
 	$(AR) crv $@ $(OBJS)
diff --git a/board/pb1x00/Makefile b/board/pb1x00/Makefile
new file mode 100644
index 0000000..d1cdc6b
--- /dev/null
+++ b/board/pb1x00/Makefile
@@ -0,0 +1,41 @@
+#
+# (C) Copyright 2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(BOARD).a
+
+OBJS	= $(BOARD).o flash.o
+SOBJS	= memsetup.o
+
+$(LIB):	.depend $(OBJS) $(SOBJS)
+	$(AR) crv $@ $(OBJS) $(SOBJS)
+
+#########################################################################
+
+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+		$(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
diff --git a/board/pb1x00/README b/board/pb1x00/README
new file mode 100644
index 0000000..b37ff36
--- /dev/null
+++ b/board/pb1x00/README
@@ -0,0 +1,63 @@
+By Thomas.Lange@corelatus.se 2004-Oct-05
+----------------------------------------
+DbAu1xx0 are development boards from AMD containing
+an Alchemy AU1xx0 series cpu with mips32 core.
+Existing cpu:s are Au1000, Au1100, Au1500 and Au1550
+
+Limitations & comments
+----------------------
+Support was originally big endian only.
+I have not tested, but several u-boot users report working
+configurations in little endian mode.
+
+I named the board dbau1x00, to allow
+support for all three development boards
+( dbau1000, dbau1100 and dbau1500 ).
+Now there is a new board called dbau1550 also, which
+should be supported RSN.
+
+I only have a dbau1000, so my testing is limited
+to this board.
+
+The board has two different flash banks, that can
+be selected via dip switch. This makes it possible
+to test new bootloaders without thrashing the YAMON
+boot loader delivered with board.
+
+NOTE! When you switch between the two boot flashes, the
+base addresses will be swapped.
+Have this in mind when you compile u-boot. TEXT_BASE has
+to match the address where u-boot is located when you
+actually launch.
+
+Ethernet only supported for mac0.
+
+PCMCIA only supported for slot 0, only 3.3V.
+
+PCMCIA IDE tested with Sandisk Compact Flash and
+IBM microdrive.
+
+###################################
+########     NOTE!!!!!!   #########
+###################################
+If you partition a disk on another system (e.g. laptop),
+all bytes will be swapped on 16bit level when using
+PCMCIA and running cpu in big endian mode!!!!
+
+This is probably due to an error in Au1000 chip.
+
+Solution:
+
+a) Boot via network and partition disk directly from
+dbau1x00. The endian will then be correct.
+
+b) Partition disk on "laptop" and fill it with all files
+you need. Then write a simple program that endian swaps
+whole disk,
+
+Example:
+Original "laptop" byte order:
+B0 B1 B2 B3 B4 B5 B6 B7 B8 B9...
+
+Dbau1000 byte order will then be:
+B1 B0 B3 B2 B5 B4 B7 B6 B9 B8...
diff --git a/board/pb1x00/config.mk b/board/pb1x00/config.mk
new file mode 100644
index 0000000..396a045
--- /dev/null
+++ b/board/pb1x00/config.mk
@@ -0,0 +1,32 @@
+#
+# (C) Copyright 2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# AMD development board AMD Alchemy Pb1x00, MIPS32 core
+#
+
+# ROM version
+#TEXT_BASE = 0xbfc00000
+
+# SDRAM version
+TEXT_BASE = 0x83800000
diff --git a/board/pb1x00/flash.c b/board/pb1x00/flash.c
new file mode 100644
index 0000000..3cf29e8
--- /dev/null
+++ b/board/pb1x00/flash.c
@@ -0,0 +1,43 @@
+/*
+ * (C) Copyright 2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info for FLASH chips */
+
+/*-----------------------------------------------------------------------
+ * flash_init()
+ *
+ * sets up flash_info and returns size of FLASH (bytes)
+ */
+unsigned long flash_init (void)
+{
+	printf ("Skipping flash_init\n");
+	return (0);
+}
+
+int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
+{
+	printf ("write_buff not implemented\n");
+	return (-1);
+}
diff --git a/board/pb1x00/memsetup.S b/board/pb1x00/memsetup.S
new file mode 100644
index 0000000..44f02b9
--- /dev/null
+++ b/board/pb1x00/memsetup.S
@@ -0,0 +1,392 @@
+/* Memory sub-system initialization code */
+
+#include <config.h>
+#include <version.h>
+#include <asm/regdef.h>
+#include <asm/au1x00.h>
+#include <asm/mipsregs.h>
+
+#define AU1500_SYS_ADDR		0xB1900000
+#define sys_endian		0x0038
+#define CP0_Config0		$16
+#define MEM_1MS			((396000000/1000000) * 1000)
+
+	.text
+	.set noreorder
+	.set mips32
+
+	.globl	memsetup
+memsetup:
+	/*
+	 * Step 1) Establish CPU endian mode.
+	 * NOTE: A fair amount of code is necessary on the Pb1000 to
+	 * obtain the value of Switch S8.1 which is used to determine
+	 * endian at run-time.
+	 */
+
+	/* RCE1 */
+	li		t0, MEM_STCFG1
+	li		t1, 0x00000083
+	sw		t1, 0(t0)
+
+	li		t0, MEM_STTIME1
+	li		t1, 0x33030A10
+	sw		t1, 0(t0)
+
+	li		t0, MEM_STADDR1
+	li		t1, 0x11803E40
+	sw		t1, 0(t0)
+
+	/* Set DSTRB bits so switch will read correctly */
+	li		t1, 0xBE00000C
+	lw		t2, 0(t1)
+	or		t2, t2, 0x00000300
+	sw		t2, 0(t1)
+
+	/* Check switch setting */
+	li		t1, 0xBE000014
+	lw		t2, 0(t1)
+	and		t2, t2, 0x00000100
+	bne		t2, zero, big_endian
+	nop
+
+little_endian:
+
+	/* Change Au1 core to little endian */
+	li	t0, AU1500_SYS_ADDR
+	li	t1, 1
+	sw	t1, sys_endian(t0)
+	mfc0	t2, CP0_CONFIG
+	mtc0	t2, CP0_CONFIG
+	nop
+	nop
+
+	/* Big Endian is default so nothing to do but fall through */
+
+big_endian:
+
+	/*
+	 * Step 2) Establish Status Register
+	 * (set BEV, clear ERL, clear EXL, clear IE)
+	 */
+	li	t1, 0x00400000
+	mtc0	t1, CP0_STATUS
+
+	/*
+	 * Step 3) Establish CP0 Config0
+	 * (set OD, set K0=3)
+	 */
+	li	t1, 0x00080003
+	mtc0	t1, CP0_CONFIG
+
+	/*
+	 * Step 4) Disable Watchpoint facilities
+	 */
+	li t1, 0x00000000
+	mtc0	t1, CP0_WATCHLO
+	mtc0	t1, CP0_IWATCHLO
+	/*
+	 * Step 5) Disable the performance counters
+	 */
+	mtc0	zero, CP0_PERFORMANCE
+	nop
+
+	/*
+	 * Step 6) Establish EJTAG Debug register
+	 */
+	mtc0	zero, CP0_DEBUG
+	nop
+
+	/*
+	 * Step 7) Establish Cause
+	 * (set IV bit)
+	 */
+	li	t1, 0x00800000
+	mtc0	t1, CP0_CAUSE
+
+	/* Establish Wired (and Random) */
+	mtc0	zero, CP0_WIRED
+	nop
+
+	/* First setup pll:s to make serial work ok */
+	/* We have a 12 MHz crystal */
+	li	t0, SYS_CPUPLL
+	li	t1, 0x21  /* 396 MHz */
+	sw	t1, 0(t0)
+	sync
+	nop
+	nop
+
+	/* wait 1mS for clocks to settle */
+	li	t1, MEM_1MS
+1:	add	t1, -1
+	bne	t1, zero, 1b
+	nop
+	/* Setup AUX PLL */
+	li	t0, SYS_AUXPLL
+	li	t1, 8 /* 96 MHz */
+	sw	t1, 0(t0) /* aux pll */
+	sync
+
+	/*  Static memory controller */
+
+	/* RCE0 8MB AMD29D323 Flash */
+	li	t0, MEM_STCFG0
+	li	t1, 0x00001403
+	sw	t1, 0(t0)
+
+	li	t0, MEM_STTIME0
+	li	t1, 0xFFFFFFDD
+	sw	t1, 0(t0)
+
+	li	t0, MEM_STADDR0
+	li	t1, 0x11F83FE0
+	sw	t1, 0(t0)
+
+	/* RCE1 CPLD Board Logic */
+	li	t0, MEM_STCFG1
+	li	t1, 0x00000083
+	sw	t1, 0(t0)
+
+	li	t0, MEM_STTIME1
+	li	t1, 0x33030A10
+	sw	t1, 0(t0)
+
+	li	t0, MEM_STADDR1
+	li	t1, 0x11803E40
+	sw	t1, 0(t0)
+
+	/* RCE2 CPLD Board Logic */
+	li	t0, MEM_STCFG2
+	li	t1, 0x00000004
+	sw	t1, 0(t0)
+
+	li	t0, MEM_STTIME2
+	li	t1, 0x08061908
+	sw	t1, 0(t0)
+
+	li	t0, MEM_STADDR2
+	li	t1, 0x12A03FC0
+	sw	t1, 0(t0)
+
+	/* RCE3 PCMCIA 250ns */
+	li	t0, MEM_STCFG3
+	li	t1, 0x00000002
+	sw	t1, 0(t0)
+
+	li	t0, MEM_STTIME3
+	li	t1, 0x280E3E07
+	sw	t1, 0(t0)
+
+	li	t0, MEM_STADDR3
+	li	t1, 0x10000000
+	sw	t1, 0(t0)
+
+	sync
+
+	/* Set peripherals to a known state */
+	li	t0, IC0_CFG0CLR
+	li	t1, 0xFFFFFFFF
+	sw	t1, 0(t0)
+
+	li	t0, IC0_CFG0CLR
+	sw	t1, 0(t0)
+
+	li	t0, IC0_CFG1CLR
+	sw	t1, 0(t0)
+
+	li	t0, IC0_CFG2CLR
+	sw	t1, 0(t0)
+
+	li	t0, IC0_SRCSET
+	sw	t1, 0(t0)
+
+	li	t0, IC0_ASSIGNSET
+	sw	t1, 0(t0)
+
+	li	t0, IC0_WAKECLR
+	sw	t1, 0(t0)
+
+	li	t0, IC0_RISINGCLR
+	sw	t1, 0(t0)
+
+	li	t0, IC0_FALLINGCLR
+	sw	t1, 0(t0)
+
+	li	t0, IC0_TESTBIT
+	li	t1, 0x00000000
+	sw	t1, 0(t0)
+	sync
+
+	li	t0, IC1_CFG0CLR
+	li	t1, 0xFFFFFFFF
+	sw	t1, 0(t0)
+
+	li	t0, IC1_CFG0CLR
+	sw	t1, 0(t0)
+
+	li	t0, IC1_CFG1CLR
+	sw	t1, 0(t0)
+
+	li	t0, IC1_CFG2CLR
+	sw	t1, 0(t0)
+
+	li	t0, IC1_SRCSET
+	sw	t1, 0(t0)
+
+	li	t0, IC1_ASSIGNSET
+	sw	t1, 0(t0)
+
+	li	t0, IC1_WAKECLR
+	sw	t1, 0(t0)
+
+	li	t0, IC1_RISINGCLR
+	sw	t1, 0(t0)
+
+	li	t0, IC1_FALLINGCLR
+	sw	t1, 0(t0)
+
+	li	t0, IC1_TESTBIT
+	li	t1, 0x00000000
+	sw	t1, 0(t0)
+	sync
+
+	li	t0, SYS_FREQCTRL0
+	li	t1, 0x00000000
+	sw	t1, 0(t0)
+
+	li	t0, SYS_FREQCTRL1
+	li	t1, 0x00000000
+	sw	t1, 0(t0)
+
+	li	t0, SYS_CLKSRC
+	li	t1, 0x00000000
+	sw	t1, 0(t0)
+
+	li	t0, SYS_PININPUTEN
+	li	t1, 0x00000000
+	sw	t1, 0(t0)
+	sync
+
+	li	t0, 0xB1100100
+	li	t1, 0x00000000
+	sw	t1, 0(t0)
+
+	li	t0, 0xB1400100
+	li	t1, 0x00000000
+	sw	t1, 0(t0)
+
+
+	li	t0, SYS_WAKEMSK
+	li	t1, 0x00000000
+	sw	t1, 0(t0)
+
+	li	t0, SYS_WAKESRC
+	li	t1, 0x00000000
+	sw	t1, 0(t0)
+
+	/* wait 1mS before setup */
+	li	t1, MEM_1MS
+1:	add	t1, -1
+	bne	t1, zero, 1b
+	nop
+
+	/*
+	 * Skip memory setup if we are running from memory
+	 */
+	li		t0, 0x90000000
+	sub		t0, ra, t0
+	bltz		t0, skip_memsetup
+	nop
+
+	/*
+	 * SDCS0 - Not used, for SMROM
+	 * SDCS1 - 32MB Micron 48LCBM16A2
+	 * SDCS2 - 32MB Micron 48LCBM16A2
+	 */
+	li	t0, MEM_SDMODE0
+	li	t1, 0x00000000
+	sw	t1, 0(t0)
+
+	li	t0, MEM_SDMODE1
+	li	t1, 0x00552229
+	sw	t1, 0(t0)
+
+	li	t0, MEM_SDMODE2
+	li	t1, 0x00552229
+	sw	t1, 0(t0)
+
+	li	t0, MEM_SDADDR0
+	li	t1, 0x00000000
+	sw	t1, 0(t0)
+
+	li	t0, MEM_SDADDR1
+	li	t1, 0x001003F8
+	sw	t1, 0(t0)
+
+	li	t0, MEM_SDADDR2
+	li	t1, 0x001023F8
+	sw	t1, 0(t0)
+
+	sync
+
+	li	t0, MEM_SDREFCFG
+	li	t1, 0x74000c30 /* Disable */
+	sw	t1, 0(t0)
+	sync
+
+	li	t0, MEM_SDPRECMD
+	sw	zero, 0(t0)
+	sync
+
+	li	t0, MEM_SDAUTOREF
+	sw	zero, 0(t0)
+	sync
+	sw	zero, 0(t0)
+	sync
+
+	li	t0, MEM_SDREFCFG
+	li	t1, 0x76000c30 /* Enable */
+	sw	t1, 0(t0)
+	sync
+
+	li	t0, MEM_SDWRMD0
+	li	t1, 0x00000023
+	sw	t1, 0(t0)
+	sync
+
+	li	t0, MEM_SDWRMD1
+	li	t1, 0x00000023
+	sw	t1, 0(t0)
+	sync
+
+	li	t0, MEM_SDWRMD2
+	li	t1, 0x00000023
+	sw	t1, 0(t0)
+	sync
+
+	/* wait 1mS after setup */
+	li	t1, MEM_1MS
+1:	add	t1, -1
+	bne	t1, zero, 1b
+	nop
+
+skip_memsetup:
+
+	li	t0, SYS_PINFUNC
+	li	t1, 0/*0x00008080*/
+	sw	t1, 0(t0)
+
+	/*
+	li	t0, SYS_TRIOUTCLR
+	li	t1, 0x00001FFF
+	sw	t1, 0(t0)
+
+	li	t0, SYS_OUTPUTCLR
+	li	t1, 0x00008000
+	sw	t1, 0(t0)
+	*/
+	sync
+
+	j	ra
+	nop
diff --git a/board/pb1x00/pb1x00.c b/board/pb1x00/pb1x00.c
new file mode 100644
index 0000000..40ac2a4
--- /dev/null
+++ b/board/pb1x00/pb1x00.c
@@ -0,0 +1,115 @@
+/*
+ * (C) Copyright 2003
+ * Thomas.Lange@corelatus.se
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <asm/au1x00.h>
+#include <asm/mipsregs.h>
+
+long int initdram(int board_type)
+{
+	/* Sdram is setup by assembler code */
+	/* If memory could be changed, we should return the true value here */
+	return 64*1024*1024;
+}
+
+#define BCSR_PCMCIA_PC0DRVEN		0x0010
+#define BCSR_PCMCIA_PC0RST		0x0080
+
+/* In cpu/mips/cpu.c */
+void write_one_tlb( int index, u32 pagemask, u32 hi, u32 low0, u32 low1 );
+
+int checkboard (void)
+{
+	u16 status;
+	/* volatile u32 *pcmcia_bcsr = (u32*)(DB1000_BCSR_ADDR+0x10); */
+	volatile u32 *sys_counter = (volatile u32*)SYS_COUNTER_CNTRL;
+	u32 proc_id;
+
+	*sys_counter = 0x100; /* Enable 32 kHz oscillator for RTC/TOY */
+
+	proc_id = read_32bit_cp0_register(CP0_PRID);
+
+	switch (proc_id >> 24) {
+	case 0:
+		puts ("Board: Pb1000\n");
+		printf ("CPU: Au1000 396 MHz, id: 0x%02x, rev: 0x%02x\n",
+			(proc_id >> 8) & 0xFF, proc_id & 0xFF);
+		break;
+	case 1:
+		puts ("Board: Pb1500\n");
+		printf ("CPU: Au1500, id: 0x%02x, rev: 0x%02x\n",
+			(proc_id >> 8) & 0xFF, proc_id & 0xFF);
+		break;
+	case 2:
+		puts ("Board: Pb1100\n");
+		printf ("CPU: Au1100, id: 0x%02x, rev: 0x%02x\n",
+			(proc_id >> 8) & 0xFF, proc_id & 0xFF);
+		break;
+	default:
+		printf ("Unsupported cpu %d, proc_id=0x%x\n", proc_id >> 24, proc_id);
+	}
+#if defined(CONFIG_IDE_PCMCIA) && 0
+	/* Enable 3.3 V on slot 0 ( VCC )
+	   No 5V */
+	status = 4;
+	*pcmcia_bcsr = status;
+
+	status |= BCSR_PCMCIA_PC0DRVEN;
+	*pcmcia_bcsr = status;
+	au_sync();
+
+	udelay(300*1000);
+
+	status |= BCSR_PCMCIA_PC0RST;
+	*pcmcia_bcsr = status;
+	au_sync();
+
+	udelay(100*1000);
+
+	/* PCMCIA is on a 36 bit physical address.
+	   We need to map it into a 32 bit addresses */
+
+#if 0
+	/* We dont need theese unless we run whole pcmcia package */
+	write_one_tlb(20,                 /* index */
+		      0x01ffe000,         /* Pagemask, 16 MB pages */
+		      CFG_PCMCIA_IO_BASE, /* Hi */
+		      0x3C000017,         /* Lo0 */
+		      0x3C200017);        /* Lo1 */
+
+	write_one_tlb(21,                   /* index */
+		      0x01ffe000,           /* Pagemask, 16 MB pages */
+		      CFG_PCMCIA_ATTR_BASE, /* Hi */
+		      0x3D000017,           /* Lo0 */
+		      0x3D200017);          /* Lo1 */
+#endif	/* 0 */
+	write_one_tlb(22,                   /* index */
+		      0x01ffe000,           /* Pagemask, 16 MB pages */
+		      CFG_PCMCIA_MEM_ADDR,  /* Hi */
+		      0x3E000017,           /* Lo0 */
+		      0x3E200017);          /* Lo1 */
+#endif	/* CONFIG_IDE_PCMCIA */
+
+	return 0;
+}
diff --git a/board/pb1x00/u-boot.lds b/board/pb1x00/u-boot.lds
new file mode 100644
index 0000000..a2d19a8
--- /dev/null
+++ b/board/pb1x00/u-boot.lds
@@ -0,0 +1,68 @@
+/*
+ * (C) Copyright 2003
+ * Wolfgang Denk Engineering, <wd@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+OUTPUT_FORMAT("elf32-bigmips", "elf32-bigmips", "elf32-bigmips")
+*/
+OUTPUT_FORMAT("elf32-tradbigmips", "elf32-tradbigmips", "elf32-tradbigmips")
+OUTPUT_ARCH(mips)
+ENTRY(_start)
+SECTIONS
+{
+	. = 0x00000000;
+
+	. = ALIGN(4);
+	.text       :
+	{
+	  *(.text)
+	}
+
+	. = ALIGN(4);
+	.rodata  : { *(.rodata) }
+
+	. = ALIGN(4);
+	.data  : { *(.data) }
+
+	. = ALIGN(4);
+	.sdata  : { *(.sdata) }
+
+	_gp = ALIGN(16);
+
+	__got_start = .;
+	.got  : { *(.got) }
+	__got_end = .;
+
+	.sdata  : { *(.sdata) }
+
+	__u_boot_cmd_start = .;
+	.u_boot_cmd : { *(.u_boot_cmd) }
+	__u_boot_cmd_end = .;
+
+	uboot_end_data = .;
+	num_got_entries = (__got_end - __got_start) >> 2;
+
+	. = ALIGN(4);
+	.sbss  : { *(.sbss) }
+	.bss  : { *(.bss) }
+	uboot_end = .;
+}
diff --git a/common/virtex2.c b/common/virtex2.c
index 8405069..b5dc366 100644
--- a/common/virtex2.c
+++ b/common/virtex2.c
@@ -35,7 +35,7 @@
 
 #if 0
 #define FPGA_DEBUG
-#endif 
+#endif
 
 #ifdef	FPGA_DEBUG
 #define	PRINTF(fmt,args...)	printf (fmt ,##args)
diff --git a/cpu/mips/Makefile b/cpu/mips/Makefile
index 1182266..c8b30c7 100644
--- a/cpu/mips/Makefile
+++ b/cpu/mips/Makefile
@@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk
 LIB	= lib$(CPU).a
 
 START	= start.o
-OBJS	= asc_serial.o au1x00_serial.o au1x00_eth.o \
+OBJS	= asc_serial.o au1x00_serial.o au1x00_eth.o au1x00_usb_ohci.o \
 	  cpu.o interrupts.o incaip_clock.o
 SOBJS	= incaip_wdt.o cache.o
 
diff --git a/cpu/mips/au1x00_eth.c b/cpu/mips/au1x00_eth.c
index 35c07b1..b7a7652 100644
--- a/cpu/mips/au1x00_eth.c
+++ b/cpu/mips/au1x00_eth.c
@@ -13,7 +13,7 @@
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
@@ -25,8 +25,8 @@
 
 #ifdef CONFIG_AU1X00
 
-#if defined(CFG_DISCOVER_PHY) || (CONFIG_COMMANDS & CFG_CMD_MII)
-#error "PHY and MII not supported yet"
+#if defined(CFG_DISCOVER_PHY)
+#error "PHY not supported yet"
 /* We just assume that we are running 100FD for now */
 /* We all use switches, right? ;-) */
 #endif
@@ -193,9 +193,9 @@ static int au1x00_init(struct eth_device* dev, bd_t * bd){
 
 	/* Put mac addr in little endian */
 #define ea eth_get_dev()->enetaddr
-	*mac_addr_high  =	(ea[5] <<  8) | (ea[4]	    ) ;
-	*mac_addr_low   =	(ea[3] << 24) | (ea[2] << 16) |
-		(ea[1] <<  8) | (ea[0]      ) ;
+	*mac_addr_high	=	(ea[5] <<  8) | (ea[4]	    ) ;
+	*mac_addr_low	=	(ea[3] << 24) | (ea[2] << 16) |
+		(ea[1] <<  8) | (ea[0]	    ) ;
 #undef ea
 	*mac_mcast_low = 0;
 	*mac_mcast_high = 0;
@@ -236,4 +236,61 @@ int au1x00_enet_initialize(bd_t *bis){
 	return 1;
 }
 
+#if (CONFIG_COMMANDS & CFG_CMD_MII)
+int  miiphy_read(unsigned char addr, unsigned char reg, unsigned short * value)
+{
+	volatile u32 *mii_control_reg = (volatile u32*)(ETH0_BASE+MAC_MII_CNTRL);
+	volatile u32 *mii_data_reg = (volatile u32*)(ETH0_BASE+MAC_MII_DATA);
+	u32 mii_control;
+	unsigned int timedout = 20;
+
+	while (*mii_control_reg & MAC_MII_BUSY) {
+		udelay(1000);
+		if (--timedout == 0) {
+			printf("au1x00_eth: miiphy_read busy timeout!!\n");
+			return -1;
+		}
+	}
+
+	mii_control = MAC_SET_MII_SELECT_REG(reg) |
+		MAC_SET_MII_SELECT_PHY(addr) | MAC_MII_READ;
+
+	*mii_control_reg = mii_control;
+
+	timedout = 20;
+	while (*mii_control_reg & MAC_MII_BUSY) {
+		udelay(1000);
+		if (--timedout == 0) {
+			printf("au1x00_eth: miiphy_read busy timeout!!\n");
+			return -1;
+		}
+	}
+	*value = *mii_data_reg;
+	return 0;
+}
+
+int  miiphy_write(unsigned char addr, unsigned char reg, unsigned short value)
+{
+	volatile u32 *mii_control_reg = (volatile u32*)(ETH0_BASE+MAC_MII_CNTRL);
+	volatile u32 *mii_data_reg = (volatile u32*)(ETH0_BASE+MAC_MII_DATA);
+	u32 mii_control;
+	unsigned int timedout = 20;
+
+	while (*mii_control_reg & MAC_MII_BUSY) {
+		udelay(1000);
+		if (--timedout == 0) {
+			printf("au1x00_eth: miiphy_write busy timeout!!\n");
+			return;
+		}
+	}
+
+	mii_control = MAC_SET_MII_SELECT_REG(reg) |
+		MAC_SET_MII_SELECT_PHY(addr) | MAC_MII_WRITE;
+
+	*mii_data_reg = value;
+	*mii_control_reg = mii_control;
+	return 0;
+}
+#endif	/* CONFIG_COMMANDS & CFG_CMD_MII */
+
 #endif /* CONFIG_AU1X00 */
diff --git a/cpu/mips/au1x00_usb_ohci.c b/cpu/mips/au1x00_usb_ohci.c
new file mode 100644
index 0000000..dbf72dc
--- /dev/null
+++ b/cpu/mips/au1x00_usb_ohci.c
@@ -0,0 +1,1727 @@
+/*
+ * URB OHCI HCD (Host Controller Driver) for USB on the AU1x00.
+ *
+ * (C) Copyright 2003
+ * Gary Jennejohn, DENX Software Engineering <gj@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Note: Part of this code has been derived from linux
+ *
+ */
+/*
+ * IMPORTANT NOTES
+ * 1 - you MUST define LITTLEENDIAN in the configuration file for the
+ *     board or this driver will NOT work!
+ * 2 - this driver is intended for use with USB Mass Storage Devices
+ *     (BBB) ONLY. There is NO support for Interrupt or Isochronous pipes!
+ */
+
+#include <config.h>
+
+#if defined(CONFIG_AU1X00) && defined(CONFIG_USB_OHCI)
+
+/* #include <pci.h> no PCI on the AU1x00 */
+
+#include <common.h>
+#include <malloc.h>
+#include <asm/io.h>
+#include <asm/au1x00.h>
+#include <usb.h>
+#include "au1x00_usb_ohci.h"
+
+#define OHCI_USE_NPS		/* force NoPowerSwitching mode */
+#define OHCI_VERBOSE_DEBUG	/* not always helpful */
+#define OHCI_FILL_TRACE
+
+#define USBH_ENABLE_BE (1<<0)
+#define USBH_ENABLE_C  (1<<1)
+#define USBH_ENABLE_E  (1<<2)
+#define USBH_ENABLE_CE (1<<3)
+#define USBH_ENABLE_RD (1<<4)
+
+#ifdef LITTLEENDIAN
+#define USBH_ENABLE_INIT (USBH_ENABLE_CE | USBH_ENABLE_E | USBH_ENABLE_C)
+#else
+#define USBH_ENABLE_INIT (USBH_ENABLE_CE | USBH_ENABLE_E | USBH_ENABLE_C | USBH_ENABLE_BE)
+#endif
+
+
+/* For initializing controller (mask in an HCFS mode too) */
+#define OHCI_CONTROL_INIT \
+	(OHCI_CTRL_CBSR & 0x3) | OHCI_CTRL_IE | OHCI_CTRL_PLE
+
+#undef readl
+#undef writel
+
+#define readl(a)     au_readl((long)(a))
+#define writel(v,a)  au_writel((v),(int)(a))
+
+#define min_t(type,x,y) ({ type __x = (x); type __y = (y); __x < __y ? __x: __y; })
+
+#define DEBUG
+#ifdef DEBUG
+#define dbg(format, arg...) printf("DEBUG: " format "\n", ## arg)
+#else
+#define dbg(format, arg...) do {} while(0)
+#endif /* DEBUG */
+#define err(format, arg...) printf("ERROR: " format "\n", ## arg)
+#define SHOW_INFO
+#ifdef SHOW_INFO
+#define info(format, arg...) printf("INFO: " format "\n", ## arg)
+#else
+#define info(format, arg...) do {} while(0)
+#endif
+
+#define m16_swap(x) swap_16(x)
+#define m32_swap(x) swap_32(x)
+
+/* global ohci_t */
+static ohci_t gohci;
+/* this must be aligned to a 256 byte boundary */
+struct ohci_hcca ghcca[1];
+/* a pointer to the aligned storage */
+struct ohci_hcca *phcca;
+/* this allocates EDs for all possible endpoints */
+struct ohci_device ohci_dev;
+/* urb_priv */
+urb_priv_t urb_priv;
+/* RHSC flag */
+int got_rhsc;
+/* device which was disconnected */
+struct usb_device *devgone;
+
+/*-------------------------------------------------------------------------*/
+
+/* AMD-756 (D2 rev) reports corrupt register contents in some cases.
+ * The erratum (#4) description is incorrect.  AMD's workaround waits
+ * till some bits (mostly reserved) are clear; ok for all revs.
+ */
+#define OHCI_QUIRK_AMD756 0xabcd
+#define read_roothub(hc, register, mask) ({ \
+	u32 temp = readl (&hc->regs->roothub.register); \
+	if (hc->flags & OHCI_QUIRK_AMD756) \
+		while (temp & mask) \
+			temp = readl (&hc->regs->roothub.register); \
+	temp; })
+
+static u32 roothub_a (struct ohci *hc)
+	{ return read_roothub (hc, a, 0xfc0fe000); }
+static inline u32 roothub_b (struct ohci *hc)
+	{ return readl (&hc->regs->roothub.b); }
+static inline u32 roothub_status (struct ohci *hc)
+	{ return readl (&hc->regs->roothub.status); }
+static u32 roothub_portstatus (struct ohci *hc, int i)
+	{ return read_roothub (hc, portstatus [i], 0xffe0fce0); }
+
+
+/* forward declaration */
+static int hc_interrupt (void);
+static void
+td_submit_job (struct usb_device * dev, unsigned long pipe, void * buffer,
+	int transfer_len, struct devrequest * setup, urb_priv_t * urb, int interval);
+
+/*-------------------------------------------------------------------------*
+ * URB support functions
+ *-------------------------------------------------------------------------*/
+
+/* free HCD-private data associated with this URB */
+
+static void urb_free_priv (urb_priv_t * urb)
+{
+	int		i;
+	int		last;
+	struct td	* td;
+
+	last = urb->length - 1;
+	if (last >= 0) {
+		for (i = 0; i <= last; i++) {
+			td = urb->td[i];
+			if (td) {
+				td->usb_dev = NULL;
+				urb->td[i] = NULL;
+			}
+		}
+	}
+}
+
+/*-------------------------------------------------------------------------*/
+
+#ifdef DEBUG
+static int sohci_get_current_frame_number (struct usb_device * dev);
+
+/* debug| print the main components of an URB
+ * small: 0) header + data packets 1) just header */
+
+static void pkt_print (struct usb_device * dev, unsigned long pipe, void * buffer,
+	int transfer_len, struct devrequest * setup, char * str, int small)
+{
+	urb_priv_t * purb = &urb_priv;
+
+	dbg("%s URB:[%4x] dev:%2d,ep:%2d-%c,type:%s,len:%d/%d stat:%#lx",
+			str,
+			sohci_get_current_frame_number (dev),
+			usb_pipedevice (pipe),
+			usb_pipeendpoint (pipe),
+			usb_pipeout (pipe)? 'O': 'I',
+			usb_pipetype (pipe) < 2? (usb_pipeint (pipe)? "INTR": "ISOC"):
+				(usb_pipecontrol (pipe)? "CTRL": "BULK"),
+			purb->actual_length,
+			transfer_len, dev->status);
+#ifdef	OHCI_VERBOSE_DEBUG
+	if (!small) {
+		int i, len;
+
+		if (usb_pipecontrol (pipe)) {
+			printf (__FILE__ ": cmd(8):");
+			for (i = 0; i < 8 ; i++)
+				printf (" %02x", ((__u8 *) setup) [i]);
+			printf ("\n");
+		}
+		if (transfer_len > 0 && buffer) {
+			printf (__FILE__ ": data(%d/%d):",
+				purb->actual_length,
+				transfer_len);
+			len = usb_pipeout (pipe)?
+					transfer_len: purb->actual_length;
+			for (i = 0; i < 16 && i < len; i++)
+				printf (" %02x", ((__u8 *) buffer) [i]);
+			printf ("%s\n", i < len? "...": "");
+		}
+	}
+#endif
+}
+
+/* just for debugging; prints non-empty branches of the int ed tree inclusive iso eds*/
+void ep_print_int_eds (ohci_t *ohci, char * str) {
+	int i, j;
+	 __u32 * ed_p;
+	for (i= 0; i < 32; i++) {
+		j = 5;
+		ed_p = &(ohci->hcca->int_table [i]);
+		if (*ed_p == 0)
+		    continue;
+		printf (__FILE__ ": %s branch int %2d(%2x):", str, i, i);
+		while (*ed_p != 0 && j--) {
+			ed_t *ed = (ed_t *)m32_swap(ed_p);
+			printf (" ed: %4x;", ed->hwINFO);
+			ed_p = &ed->hwNextED;
+		}
+		printf ("\n");
+	}
+}
+
+static void ohci_dump_intr_mask (char *label, __u32 mask)
+{
+	dbg ("%s: 0x%08x%s%s%s%s%s%s%s%s%s",
+		label,
+		mask,
+		(mask & OHCI_INTR_MIE) ? " MIE" : "",
+		(mask & OHCI_INTR_OC) ? " OC" : "",
+		(mask & OHCI_INTR_RHSC) ? " RHSC" : "",
+		(mask & OHCI_INTR_FNO) ? " FNO" : "",
+		(mask & OHCI_INTR_UE) ? " UE" : "",
+		(mask & OHCI_INTR_RD) ? " RD" : "",
+		(mask & OHCI_INTR_SF) ? " SF" : "",
+		(mask & OHCI_INTR_WDH) ? " WDH" : "",
+		(mask & OHCI_INTR_SO) ? " SO" : ""
+		);
+}
+
+static void maybe_print_eds (char *label, __u32 value)
+{
+	ed_t *edp = (ed_t *)value;
+
+	if (value) {
+		dbg ("%s %08x", label, value);
+		dbg ("%08x", edp->hwINFO);
+		dbg ("%08x", edp->hwTailP);
+		dbg ("%08x", edp->hwHeadP);
+		dbg ("%08x", edp->hwNextED);
+	}
+}
+
+static char * hcfs2string (int state)
+{
+	switch (state) {
+		case OHCI_USB_RESET:	return "reset";
+		case OHCI_USB_RESUME:	return "resume";
+		case OHCI_USB_OPER:	return "operational";
+		case OHCI_USB_SUSPEND:	return "suspend";
+	}
+	return "?";
+}
+
+/* dump control and status registers */
+static void ohci_dump_status (ohci_t *controller)
+{
+	struct ohci_regs	*regs = controller->regs;
+	__u32			temp;
+
+	temp = readl (&regs->revision) & 0xff;
+	if (temp != 0x10)
+		dbg ("spec %d.%d", (temp >> 4), (temp & 0x0f));
+
+	temp = readl (&regs->control);
+	dbg ("control: 0x%08x%s%s%s HCFS=%s%s%s%s%s CBSR=%d", temp,
+		(temp & OHCI_CTRL_RWE) ? " RWE" : "",
+		(temp & OHCI_CTRL_RWC) ? " RWC" : "",
+		(temp & OHCI_CTRL_IR) ? " IR" : "",
+		hcfs2string (temp & OHCI_CTRL_HCFS),
+		(temp & OHCI_CTRL_BLE) ? " BLE" : "",
+		(temp & OHCI_CTRL_CLE) ? " CLE" : "",
+		(temp & OHCI_CTRL_IE) ? " IE" : "",
+		(temp & OHCI_CTRL_PLE) ? " PLE" : "",
+		temp & OHCI_CTRL_CBSR
+		);
+
+	temp = readl (&regs->cmdstatus);
+	dbg ("cmdstatus: 0x%08x SOC=%d%s%s%s%s", temp,
+		(temp & OHCI_SOC) >> 16,
+		(temp & OHCI_OCR) ? " OCR" : "",
+		(temp & OHCI_BLF) ? " BLF" : "",
+		(temp & OHCI_CLF) ? " CLF" : "",
+		(temp & OHCI_HCR) ? " HCR" : ""
+		);
+
+	ohci_dump_intr_mask ("intrstatus", readl (&regs->intrstatus));
+	ohci_dump_intr_mask ("intrenable", readl (&regs->intrenable));
+
+	maybe_print_eds ("ed_periodcurrent", readl (&regs->ed_periodcurrent));
+
+	maybe_print_eds ("ed_controlhead", readl (&regs->ed_controlhead));
+	maybe_print_eds ("ed_controlcurrent", readl (&regs->ed_controlcurrent));
+
+	maybe_print_eds ("ed_bulkhead", readl (&regs->ed_bulkhead));
+	maybe_print_eds ("ed_bulkcurrent", readl (&regs->ed_bulkcurrent));
+
+	maybe_print_eds ("donehead", readl (&regs->donehead));
+}
+
+static void ohci_dump_roothub (ohci_t *controller, int verbose)
+{
+	__u32			temp, ndp, i;
+
+	temp = roothub_a (controller);
+	ndp = (temp & RH_A_NDP);
+
+	if (verbose) {
+		dbg ("roothub.a: %08x POTPGT=%d%s%s%s%s%s NDP=%d", temp,
+			((temp & RH_A_POTPGT) >> 24) & 0xff,
+			(temp & RH_A_NOCP) ? " NOCP" : "",
+			(temp & RH_A_OCPM) ? " OCPM" : "",
+			(temp & RH_A_DT) ? " DT" : "",
+			(temp & RH_A_NPS) ? " NPS" : "",
+			(temp & RH_A_PSM) ? " PSM" : "",
+			ndp
+			);
+		temp = roothub_b (controller);
+		dbg ("roothub.b: %08x PPCM=%04x DR=%04x",
+			temp,
+			(temp & RH_B_PPCM) >> 16,
+			(temp & RH_B_DR)
+			);
+		temp = roothub_status (controller);
+		dbg ("roothub.status: %08x%s%s%s%s%s%s",
+			temp,
+			(temp & RH_HS_CRWE) ? " CRWE" : "",
+			(temp & RH_HS_OCIC) ? " OCIC" : "",
+			(temp & RH_HS_LPSC) ? " LPSC" : "",
+			(temp & RH_HS_DRWE) ? " DRWE" : "",
+			(temp & RH_HS_OCI) ? " OCI" : "",
+			(temp & RH_HS_LPS) ? " LPS" : ""
+			);
+	}
+
+	for (i = 0; i < ndp; i++) {
+		temp = roothub_portstatus (controller, i);
+		dbg ("roothub.portstatus [%d] = 0x%08x%s%s%s%s%s%s%s%s%s%s%s%s",
+			i,
+			temp,
+			(temp & RH_PS_PRSC) ? " PRSC" : "",
+			(temp & RH_PS_OCIC) ? " OCIC" : "",
+			(temp & RH_PS_PSSC) ? " PSSC" : "",
+			(temp & RH_PS_PESC) ? " PESC" : "",
+			(temp & RH_PS_CSC) ? " CSC" : "",
+
+			(temp & RH_PS_LSDA) ? " LSDA" : "",
+			(temp & RH_PS_PPS) ? " PPS" : "",
+			(temp & RH_PS_PRS) ? " PRS" : "",
+			(temp & RH_PS_POCI) ? " POCI" : "",
+			(temp & RH_PS_PSS) ? " PSS" : "",
+
+			(temp & RH_PS_PES) ? " PES" : "",
+			(temp & RH_PS_CCS) ? " CCS" : ""
+			);
+	}
+}
+
+static void ohci_dump (ohci_t *controller, int verbose)
+{
+	dbg ("OHCI controller usb-%s state", controller->slot_name);
+
+	/* dumps some of the state we know about */
+	ohci_dump_status (controller);
+	if (verbose)
+		ep_print_int_eds (controller, "hcca");
+	dbg ("hcca frame #%04x", controller->hcca->frame_no);
+	ohci_dump_roothub (controller, 1);
+}
+
+
+#endif /* DEBUG */
+
+/*-------------------------------------------------------------------------*
+ * Interface functions (URB)
+ *-------------------------------------------------------------------------*/
+
+/* get a transfer request */
+
+int sohci_submit_job(struct usb_device *dev, unsigned long pipe, void *buffer,
+		int transfer_len, struct devrequest *setup, int interval)
+{
+	ohci_t *ohci;
+	ed_t * ed;
+	urb_priv_t *purb_priv;
+	int i, size = 0;
+
+	ohci = &gohci;
+
+	/* when controller's hung, permit only roothub cleanup attempts
+	 * such as powering down ports */
+	if (ohci->disabled) {
+		err("sohci_submit_job: EPIPE");
+		return -1;
+	}
+
+	/* every endpoint has a ed, locate and fill it */
+	if (!(ed = ep_add_ed (dev, pipe))) {
+		err("sohci_submit_job: ENOMEM");
+		return -1;
+	}
+
+	/* for the private part of the URB we need the number of TDs (size) */
+	switch (usb_pipetype (pipe)) {
+		case PIPE_BULK: /* one TD for every 4096 Byte */
+			size = (transfer_len - 1) / 4096 + 1;
+			break;
+		case PIPE_CONTROL: /* 1 TD for setup, 1 for ACK and 1 for every 4096 B */
+			size = (transfer_len == 0)? 2:
+						(transfer_len - 1) / 4096 + 3;
+			break;
+	}
+
+	if (size >= (N_URB_TD - 1)) {
+		err("need %d TDs, only have %d", size, N_URB_TD);
+		return -1;
+	}
+	purb_priv = &urb_priv;
+	purb_priv->pipe = pipe;
+
+	/* fill the private part of the URB */
+	purb_priv->length = size;
+	purb_priv->ed = ed;
+	purb_priv->actual_length = 0;
+
+	/* allocate the TDs */
+	/* note that td[0] was allocated in ep_add_ed */
+	for (i = 0; i < size; i++) {
+		purb_priv->td[i] = td_alloc (dev);
+		if (!purb_priv->td[i]) {
+			purb_priv->length = i;
+			urb_free_priv (purb_priv);
+			err("sohci_submit_job: ENOMEM");
+			return -1;
+		}
+	}
+
+	if (ed->state == ED_NEW || (ed->state & ED_DEL)) {
+		urb_free_priv (purb_priv);
+		err("sohci_submit_job: EINVAL");
+		return -1;
+	}
+
+	/* link the ed into a chain if is not already */
+	if (ed->state != ED_OPER)
+		ep_link (ohci, ed);
+
+	/* fill the TDs and link it to the ed */
+	td_submit_job(dev, pipe, buffer, transfer_len, setup, purb_priv, interval);
+
+	return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+#ifdef DEBUG
+/* tell us the current USB frame number */
+
+static int sohci_get_current_frame_number (struct usb_device *usb_dev)
+{
+	ohci_t *ohci = &gohci;
+
+	return m16_swap (ohci->hcca->frame_no);
+}
+#endif
+
+/*-------------------------------------------------------------------------*
+ * ED handling functions
+ *-------------------------------------------------------------------------*/
+
+/* link an ed into one of the HC chains */
+
+static int ep_link (ohci_t *ohci, ed_t *edi)
+{
+	volatile ed_t *ed = edi;
+
+	ed->state = ED_OPER;
+
+	switch (ed->type) {
+	case PIPE_CONTROL:
+		ed->hwNextED = 0;
+		if (ohci->ed_controltail == NULL) {
+			writel ((long)ed, &ohci->regs->ed_controlhead);
+		} else {
+			ohci->ed_controltail->hwNextED = m32_swap (ed);
+		}
+		ed->ed_prev = ohci->ed_controltail;
+		if (!ohci->ed_controltail && !ohci->ed_rm_list[0] &&
+			!ohci->ed_rm_list[1] && !ohci->sleeping) {
+			ohci->hc_control |= OHCI_CTRL_CLE;
+			writel (ohci->hc_control, &ohci->regs->control);
+		}
+		ohci->ed_controltail = edi;
+		break;
+
+	case PIPE_BULK:
+		ed->hwNextED = 0;
+		if (ohci->ed_bulktail == NULL) {
+			writel ((long)ed, &ohci->regs->ed_bulkhead);
+		} else {
+			ohci->ed_bulktail->hwNextED = m32_swap (ed);
+		}
+		ed->ed_prev = ohci->ed_bulktail;
+		if (!ohci->ed_bulktail && !ohci->ed_rm_list[0] &&
+			!ohci->ed_rm_list[1] && !ohci->sleeping) {
+			ohci->hc_control |= OHCI_CTRL_BLE;
+			writel (ohci->hc_control, &ohci->regs->control);
+		}
+		ohci->ed_bulktail = edi;
+		break;
+	}
+	return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* unlink an ed from one of the HC chains.
+ * just the link to the ed is unlinked.
+ * the link from the ed still points to another operational ed or 0
+ * so the HC can eventually finish the processing of the unlinked ed */
+
+static int ep_unlink (ohci_t *ohci, ed_t *ed)
+{
+	ed->hwINFO |= m32_swap (OHCI_ED_SKIP);
+
+	switch (ed->type) {
+	case PIPE_CONTROL:
+		if (ed->ed_prev == NULL) {
+			if (!ed->hwNextED) {
+				ohci->hc_control &= ~OHCI_CTRL_CLE;
+				writel (ohci->hc_control, &ohci->regs->control);
+			}
+			writel (m32_swap (*((__u32 *)&ed->hwNextED)), &ohci->regs->ed_controlhead);
+		} else {
+			ed->ed_prev->hwNextED = ed->hwNextED;
+		}
+		if (ohci->ed_controltail == ed) {
+			ohci->ed_controltail = ed->ed_prev;
+		} else {
+			((ed_t *)m32_swap (*((__u32 *)&ed->hwNextED)))->ed_prev = ed->ed_prev;
+		}
+		break;
+
+	case PIPE_BULK:
+		if (ed->ed_prev == NULL) {
+			if (!ed->hwNextED) {
+				ohci->hc_control &= ~OHCI_CTRL_BLE;
+				writel (ohci->hc_control, &ohci->regs->control);
+			}
+			writel (m32_swap (*((__u32 *)&ed->hwNextED)), &ohci->regs->ed_bulkhead);
+		} else {
+			ed->ed_prev->hwNextED = ed->hwNextED;
+		}
+		if (ohci->ed_bulktail == ed) {
+			ohci->ed_bulktail = ed->ed_prev;
+		} else {
+			((ed_t *)m32_swap (*((__u32 *)&ed->hwNextED)))->ed_prev = ed->ed_prev;
+		}
+		break;
+	}
+	ed->state = ED_UNLINK;
+	return 0;
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+/* add/reinit an endpoint; this should be done once at the usb_set_configuration command,
+ * but the USB stack is a little bit stateless	so we do it at every transaction
+ * if the state of the ed is ED_NEW then a dummy td is added and the state is changed to ED_UNLINK
+ * in all other cases the state is left unchanged
+ * the ed info fields are setted anyway even though most of them should not change */
+
+static ed_t * ep_add_ed (struct usb_device *usb_dev, unsigned long pipe)
+{
+	td_t *td;
+	ed_t *ed_ret;
+	volatile ed_t *ed;
+
+	ed = ed_ret = &ohci_dev.ed[(usb_pipeendpoint (pipe) << 1) |
+			(usb_pipecontrol (pipe)? 0: usb_pipeout (pipe))];
+
+	if ((ed->state & ED_DEL) || (ed->state & ED_URB_DEL)) {
+		err("ep_add_ed: pending delete");
+		/* pending delete request */
+		return NULL;
+	}
+
+	if (ed->state == ED_NEW) {
+		ed->hwINFO = m32_swap (OHCI_ED_SKIP); /* skip ed */
+		/* dummy td; end of td list for ed */
+		td = td_alloc (usb_dev);
+		ed->hwTailP = m32_swap (td);
+		ed->hwHeadP = ed->hwTailP;
+		ed->state = ED_UNLINK;
+		ed->type = usb_pipetype (pipe);
+		ohci_dev.ed_cnt++;
+	}
+
+	ed->hwINFO = m32_swap (usb_pipedevice (pipe)
+			| usb_pipeendpoint (pipe) << 7
+			| (usb_pipeisoc (pipe)? 0x8000: 0)
+			| (usb_pipecontrol (pipe)? 0: (usb_pipeout (pipe)? 0x800: 0x1000))
+			| usb_pipeslow (pipe) << 13
+			| usb_maxpacket (usb_dev, pipe) << 16);
+
+	return ed_ret;
+}
+
+/*-------------------------------------------------------------------------*
+ * TD handling functions
+ *-------------------------------------------------------------------------*/
+
+/* enqueue next TD for this URB (OHCI spec 5.2.8.2) */
+
+static void td_fill (ohci_t *ohci, unsigned int info,
+	void *data, int len,
+	struct usb_device *dev, int index, urb_priv_t *urb_priv)
+{
+	volatile td_t  *td, *td_pt;
+#ifdef OHCI_FILL_TRACE
+	int i;
+#endif
+
+	if (index > urb_priv->length) {
+		err("index > length");
+		return;
+	}
+	/* use this td as the next dummy */
+	td_pt = urb_priv->td [index];
+	td_pt->hwNextTD = 0;
+
+	/* fill the old dummy TD */
+	td = urb_priv->td [index] = (td_t *)(m32_swap (urb_priv->ed->hwTailP) & ~0xf);
+
+	td->ed = urb_priv->ed;
+	td->next_dl_td = NULL;
+	td->index = index;
+	td->data = (__u32)data;
+#ifdef OHCI_FILL_TRACE
+	if (1 || ((usb_pipetype(urb_priv->pipe) == PIPE_BULK) && usb_pipeout(urb_priv->pipe))) {
+		for (i = 0; i < len; i++)
+		printf("td->data[%d] %#2x\n",i, ((unsigned char *)(td->data+0x80000000))[i]);
+	}
+#endif
+	if (!len)
+		data = 0;
+
+	td->hwINFO = m32_swap (info);
+	td->hwCBP = m32_swap (data);
+	if (data)
+		td->hwBE = m32_swap (data + len - 1);
+	else
+		td->hwBE = 0;
+	td->hwNextTD = m32_swap (td_pt);
+	td->hwPSW [0] = m16_swap (((__u32)data & 0x0FFF) | 0xE000);
+
+	/* append to queue */
+	td->ed->hwTailP = td->hwNextTD;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* prepare all TDs of a transfer */
+
+#define kseg_to_phys(x)	  ((void *)((__u32)(x) - 0x80000000))
+
+static void td_submit_job (struct usb_device *dev, unsigned long pipe, void *buffer,
+	int transfer_len, struct devrequest *setup, urb_priv_t *urb, int interval)
+{
+	ohci_t *ohci = &gohci;
+	int data_len = transfer_len;
+	void *data;
+	int cnt = 0;
+	__u32 info = 0;
+	unsigned int toggle = 0;
+
+	/* OHCI handles the DATA-toggles itself, we just use the USB-toggle bits for reseting */
+	if(usb_gettoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe))) {
+		toggle = TD_T_TOGGLE;
+	} else {
+		toggle = TD_T_DATA0;
+		usb_settoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe), 1);
+	}
+	urb->td_cnt = 0;
+	if (data_len)
+		data = kseg_to_phys(buffer);
+	else
+		data = 0;
+
+	switch (usb_pipetype (pipe)) {
+	case PIPE_BULK:
+		info = usb_pipeout (pipe)?
+			TD_CC | TD_DP_OUT : TD_CC | TD_DP_IN ;
+		while(data_len > 4096) {
+			td_fill (ohci, info | (cnt? TD_T_TOGGLE:toggle), data, 4096, dev, cnt, urb);
+			data += 4096; data_len -= 4096; cnt++;
+		}
+		info = usb_pipeout (pipe)?
+			TD_CC | TD_DP_OUT : TD_CC | TD_R | TD_DP_IN ;
+		td_fill (ohci, info | (cnt? TD_T_TOGGLE:toggle), data, data_len, dev, cnt, urb);
+		cnt++;
+
+		if (!ohci->sleeping)
+			writel (OHCI_BLF, &ohci->regs->cmdstatus); /* start bulk list */
+		break;
+
+	case PIPE_CONTROL:
+		info = TD_CC | TD_DP_SETUP | TD_T_DATA0;
+		td_fill (ohci, info, kseg_to_phys(setup), 8, dev, cnt++, urb);
+		if (data_len > 0) {
+			info = usb_pipeout (pipe)?
+				TD_CC | TD_R | TD_DP_OUT | TD_T_DATA1 : TD_CC | TD_R | TD_DP_IN | TD_T_DATA1;
+			/* NOTE:  mishandles transfers >8K, some >4K */
+			td_fill (ohci, info, data, data_len, dev, cnt++, urb);
+		}
+		info = usb_pipeout (pipe)?
+			TD_CC | TD_DP_IN | TD_T_DATA1: TD_CC | TD_DP_OUT | TD_T_DATA1;
+		td_fill (ohci, info, data, 0, dev, cnt++, urb);
+		if (!ohci->sleeping)
+			writel (OHCI_CLF, &ohci->regs->cmdstatus); /* start Control list */
+		break;
+	}
+	if (urb->length != cnt)
+		dbg("TD LENGTH %d != CNT %d", urb->length, cnt);
+}
+
+/*-------------------------------------------------------------------------*
+ * Done List handling functions
+ *-------------------------------------------------------------------------*/
+
+
+/* calculate the transfer length and update the urb */
+
+static void dl_transfer_length(td_t * td)
+{
+	__u32 tdINFO, tdBE, tdCBP;
+	urb_priv_t *lurb_priv = &urb_priv;
+
+	tdINFO = m32_swap (td->hwINFO);
+	tdBE   = m32_swap (td->hwBE);
+	tdCBP  = m32_swap (td->hwCBP);
+
+
+	if (!(usb_pipetype (lurb_priv->pipe) == PIPE_CONTROL &&
+	    ((td->index == 0) || (td->index == lurb_priv->length - 1)))) {
+		if (tdBE != 0) {
+			if (td->hwCBP == 0)
+				lurb_priv->actual_length += tdBE - td->data + 1;
+			else
+				lurb_priv->actual_length += tdCBP - td->data;
+		}
+	}
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* replies to the request have to be on a FIFO basis so
+ * we reverse the reversed done-list */
+
+static td_t * dl_reverse_done_list (ohci_t *ohci)
+{
+	__u32 td_list_hc;
+	td_t *td_rev = NULL;
+	td_t *td_list = NULL;
+	urb_priv_t *lurb_priv = NULL;
+
+	td_list_hc = m32_swap (ohci->hcca->done_head) & 0xfffffff0;
+	ohci->hcca->done_head = 0;
+
+	while (td_list_hc) {
+		td_list = (td_t *)td_list_hc;
+
+		if (TD_CC_GET (m32_swap (td_list->hwINFO))) {
+			lurb_priv = &urb_priv;
+			dbg(" USB-error/status: %x : %p",
+					TD_CC_GET (m32_swap (td_list->hwINFO)), td_list);
+			if (td_list->ed->hwHeadP & m32_swap (0x1)) {
+				if (lurb_priv && ((td_list->index + 1) < lurb_priv->length)) {
+					td_list->ed->hwHeadP =
+						(lurb_priv->td[lurb_priv->length - 1]->hwNextTD & m32_swap (0xfffffff0)) |
+									(td_list->ed->hwHeadP & m32_swap (0x2));
+					lurb_priv->td_cnt += lurb_priv->length - td_list->index - 1;
+				} else
+					td_list->ed->hwHeadP &= m32_swap (0xfffffff2);
+			}
+		}
+
+		td_list->next_dl_td = td_rev;
+		td_rev = td_list;
+		td_list_hc = m32_swap (td_list->hwNextTD) & 0xfffffff0;
+	}
+	return td_list;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* td done list */
+static int dl_done_list (ohci_t *ohci, td_t *td_list)
+{
+	td_t *td_list_next = NULL;
+	ed_t *ed;
+	int cc = 0;
+	int stat = 0;
+	/* urb_t *urb; */
+	urb_priv_t *lurb_priv;
+	__u32 tdINFO, edHeadP, edTailP;
+
+	while (td_list) {
+		td_list_next = td_list->next_dl_td;
+
+		lurb_priv = &urb_priv;
+		tdINFO = m32_swap (td_list->hwINFO);
+
+		ed = td_list->ed;
+
+		dl_transfer_length(td_list);
+
+		/* error code of transfer */
+		cc = TD_CC_GET (tdINFO);
+		if (cc != 0) {
+			dbg("ConditionCode %#x", cc);
+			stat = cc_to_error[cc];
+		}
+
+		if (ed->state != ED_NEW) {
+			edHeadP = m32_swap (ed->hwHeadP) & 0xfffffff0;
+			edTailP = m32_swap (ed->hwTailP);
+
+			/* unlink eds if they are not busy */
+			if ((edHeadP == edTailP) && (ed->state == ED_OPER))
+				ep_unlink (ohci, ed);
+		}
+
+		td_list = td_list_next;
+	}
+	return stat;
+}
+
+/*-------------------------------------------------------------------------*
+ * Virtual Root Hub
+ *-------------------------------------------------------------------------*/
+
+/* Device descriptor */
+static __u8 root_hub_dev_des[] =
+{
+	0x12,	    /*	__u8  bLength; */
+	0x01,	    /*	__u8  bDescriptorType; Device */
+	0x10,	    /*	__u16 bcdUSB; v1.1 */
+	0x01,
+	0x09,	    /*	__u8  bDeviceClass; HUB_CLASSCODE */
+	0x00,	    /*	__u8  bDeviceSubClass; */
+	0x00,	    /*	__u8  bDeviceProtocol; */
+	0x08,	    /*	__u8  bMaxPacketSize0; 8 Bytes */
+	0x00,	    /*	__u16 idVendor; */
+	0x00,
+	0x00,	    /*	__u16 idProduct; */
+	0x00,
+	0x00,	    /*	__u16 bcdDevice; */
+	0x00,
+	0x00,	    /*	__u8  iManufacturer; */
+	0x01,	    /*	__u8  iProduct; */
+	0x00,	    /*	__u8  iSerialNumber; */
+	0x01	    /*	__u8  bNumConfigurations; */
+};
+
+
+/* Configuration descriptor */
+static __u8 root_hub_config_des[] =
+{
+	0x09,	    /*	__u8  bLength; */
+	0x02,	    /*	__u8  bDescriptorType; Configuration */
+	0x19,	    /*	__u16 wTotalLength; */
+	0x00,
+	0x01,	    /*	__u8  bNumInterfaces; */
+	0x01,	    /*	__u8  bConfigurationValue; */
+	0x00,	    /*	__u8  iConfiguration; */
+	0x40,	    /*	__u8  bmAttributes;
+		 Bit 7: Bus-powered, 6: Self-powered, 5 Remote-wakwup, 4..0: resvd */
+	0x00,	    /*	__u8  MaxPower; */
+
+	/* interface */
+	0x09,	    /*	__u8  if_bLength; */
+	0x04,	    /*	__u8  if_bDescriptorType; Interface */
+	0x00,	    /*	__u8  if_bInterfaceNumber; */
+	0x00,	    /*	__u8  if_bAlternateSetting; */
+	0x01,	    /*	__u8  if_bNumEndpoints; */
+	0x09,	    /*	__u8  if_bInterfaceClass; HUB_CLASSCODE */
+	0x00,	    /*	__u8  if_bInterfaceSubClass; */
+	0x00,	    /*	__u8  if_bInterfaceProtocol; */
+	0x00,	    /*	__u8  if_iInterface; */
+
+	/* endpoint */
+	0x07,	    /*	__u8  ep_bLength; */
+	0x05,	    /*	__u8  ep_bDescriptorType; Endpoint */
+	0x81,	    /*	__u8  ep_bEndpointAddress; IN Endpoint 1 */
+	0x03,	    /*	__u8  ep_bmAttributes; Interrupt */
+	0x02,	    /*	__u16 ep_wMaxPacketSize; ((MAX_ROOT_PORTS + 1) / 8 */
+	0x00,
+	0xff	    /*	__u8  ep_bInterval; 255 ms */
+};
+
+static unsigned char root_hub_str_index0[] =
+{
+	0x04,			/*  __u8  bLength; */
+	0x03,			/*  __u8  bDescriptorType; String-descriptor */
+	0x09,			/*  __u8  lang ID */
+	0x04,			/*  __u8  lang ID */
+};
+
+static unsigned char root_hub_str_index1[] =
+{
+	28,			/*  __u8  bLength; */
+	0x03,			/*  __u8  bDescriptorType; String-descriptor */
+	'O',			/*  __u8  Unicode */
+	0,				/*  __u8  Unicode */
+	'H',			/*  __u8  Unicode */
+	0,				/*  __u8  Unicode */
+	'C',			/*  __u8  Unicode */
+	0,				/*  __u8  Unicode */
+	'I',			/*  __u8  Unicode */
+	0,				/*  __u8  Unicode */
+	' ',			/*  __u8  Unicode */
+	0,				/*  __u8  Unicode */
+	'R',			/*  __u8  Unicode */
+	0,				/*  __u8  Unicode */
+	'o',			/*  __u8  Unicode */
+	0,				/*  __u8  Unicode */
+	'o',			/*  __u8  Unicode */
+	0,				/*  __u8  Unicode */
+	't',			/*  __u8  Unicode */
+	0,				/*  __u8  Unicode */
+	' ',			/*  __u8  Unicode */
+	0,				/*  __u8  Unicode */
+	'H',			/*  __u8  Unicode */
+	0,				/*  __u8  Unicode */
+	'u',			/*  __u8  Unicode */
+	0,				/*  __u8  Unicode */
+	'b',			/*  __u8  Unicode */
+	0,				/*  __u8  Unicode */
+};
+
+/* Hub class-specific descriptor is constructed dynamically */
+
+
+/*-------------------------------------------------------------------------*/
+
+#define OK(x)			len = (x); break
+#ifdef DEBUG
+#define WR_RH_STAT(x)		{info("WR:status %#8x", (x));writel((x), &gohci.regs->roothub.status);}
+#define WR_RH_PORTSTAT(x)	{info("WR:portstatus[%d] %#8x", wIndex-1, (x));writel((x), &gohci.regs->roothub.portstatus[wIndex-1]);}
+#else
+#define WR_RH_STAT(x)		writel((x), &gohci.regs->roothub.status)
+#define WR_RH_PORTSTAT(x)	writel((x), &gohci.regs->roothub.portstatus[wIndex-1])
+#endif
+#define RD_RH_STAT		roothub_status(&gohci)
+#define RD_RH_PORTSTAT		roothub_portstatus(&gohci,wIndex-1)
+
+/* request to virtual root hub */
+
+int rh_check_port_status(ohci_t *controller)
+{
+	__u32 temp, ndp, i;
+	int res;
+
+	res = -1;
+	temp = roothub_a (controller);
+	ndp = (temp & RH_A_NDP);
+	for (i = 0; i < ndp; i++) {
+		temp = roothub_portstatus (controller, i);
+		/* check for a device disconnect */
+		if (((temp & (RH_PS_PESC | RH_PS_CSC)) ==
+			(RH_PS_PESC | RH_PS_CSC)) &&
+			((temp & RH_PS_CCS) == 0)) {
+			res = i;
+			break;
+		}
+	}
+	return res;
+}
+
+static int ohci_submit_rh_msg(struct usb_device *dev, unsigned long pipe,
+		void *buffer, int transfer_len, struct devrequest *cmd)
+{
+	void * data = buffer;
+	int leni = transfer_len;
+	int len = 0;
+	int stat = 0;
+	__u32 datab[4];
+	__u8 *data_buf = (__u8 *)datab;
+	__u16 bmRType_bReq;
+	__u16 wValue;
+	__u16 wIndex;
+	__u16 wLength;
+
+#ifdef DEBUG
+urb_priv.actual_length = 0;
+pkt_print(dev, pipe, buffer, transfer_len, cmd, "SUB(rh)", usb_pipein(pipe));
+#else
+	wait_ms(1);
+#endif
+	if ((pipe & PIPE_INTERRUPT) == PIPE_INTERRUPT) {
+		info("Root-Hub submit IRQ: NOT implemented");
+		return 0;
+	}
+
+	bmRType_bReq  = cmd->requesttype | (cmd->request << 8);
+	wValue	      = m16_swap (cmd->value);
+	wIndex	      = m16_swap (cmd->index);
+	wLength	      = m16_swap (cmd->length);
+
+	info("Root-Hub: adr: %2x cmd(%1x): %08x %04x %04x %04x",
+		dev->devnum, 8, bmRType_bReq, wValue, wIndex, wLength);
+
+	switch (bmRType_bReq) {
+	/* Request Destination:
+	   without flags: Device,
+	   RH_INTERFACE: interface,
+	   RH_ENDPOINT: endpoint,
+	   RH_CLASS means HUB here,
+	   RH_OTHER | RH_CLASS	almost ever means HUB_PORT here
+	*/
+
+	case RH_GET_STATUS:
+			*(__u16 *) data_buf = m16_swap (1); OK (2);
+	case RH_GET_STATUS | RH_INTERFACE:
+			*(__u16 *) data_buf = m16_swap (0); OK (2);
+	case RH_GET_STATUS | RH_ENDPOINT:
+			*(__u16 *) data_buf = m16_swap (0); OK (2);
+	case RH_GET_STATUS | RH_CLASS:
+			*(__u32 *) data_buf = m32_swap (
+				RD_RH_STAT & ~(RH_HS_CRWE | RH_HS_DRWE));
+			OK (4);
+	case RH_GET_STATUS | RH_OTHER | RH_CLASS:
+			*(__u32 *) data_buf = m32_swap (RD_RH_PORTSTAT); OK (4);
+
+	case RH_CLEAR_FEATURE | RH_ENDPOINT:
+		switch (wValue) {
+			case (RH_ENDPOINT_STALL): OK (0);
+		}
+		break;
+
+	case RH_CLEAR_FEATURE | RH_CLASS:
+		switch (wValue) {
+			case RH_C_HUB_LOCAL_POWER:
+				OK(0);
+			case (RH_C_HUB_OVER_CURRENT):
+					WR_RH_STAT(RH_HS_OCIC); OK (0);
+		}
+		break;
+
+	case RH_CLEAR_FEATURE | RH_OTHER | RH_CLASS:
+		switch (wValue) {
+			case (RH_PORT_ENABLE):
+					WR_RH_PORTSTAT (RH_PS_CCS ); OK (0);
+			case (RH_PORT_SUSPEND):
+					WR_RH_PORTSTAT (RH_PS_POCI); OK (0);
+			case (RH_PORT_POWER):
+					WR_RH_PORTSTAT (RH_PS_LSDA); OK (0);
+			case (RH_C_PORT_CONNECTION):
+					WR_RH_PORTSTAT (RH_PS_CSC ); OK (0);
+			case (RH_C_PORT_ENABLE):
+					WR_RH_PORTSTAT (RH_PS_PESC); OK (0);
+			case (RH_C_PORT_SUSPEND):
+					WR_RH_PORTSTAT (RH_PS_PSSC); OK (0);
+			case (RH_C_PORT_OVER_CURRENT):
+					WR_RH_PORTSTAT (RH_PS_OCIC); OK (0);
+			case (RH_C_PORT_RESET):
+					WR_RH_PORTSTAT (RH_PS_PRSC); OK (0);
+		}
+		break;
+
+	case RH_SET_FEATURE | RH_OTHER | RH_CLASS:
+		switch (wValue) {
+			case (RH_PORT_SUSPEND):
+					WR_RH_PORTSTAT (RH_PS_PSS ); OK (0);
+			case (RH_PORT_RESET): /* BUG IN HUP CODE *********/
+					if (RD_RH_PORTSTAT & RH_PS_CCS)
+					    WR_RH_PORTSTAT (RH_PS_PRS);
+					OK (0);
+			case (RH_PORT_POWER):
+					WR_RH_PORTSTAT (RH_PS_PPS ); OK (0);
+			case (RH_PORT_ENABLE): /* BUG IN HUP CODE *********/
+					if (RD_RH_PORTSTAT & RH_PS_CCS)
+					    WR_RH_PORTSTAT (RH_PS_PES );
+					OK (0);
+		}
+		break;
+
+	case RH_SET_ADDRESS: gohci.rh.devnum = wValue; OK(0);
+
+	case RH_GET_DESCRIPTOR:
+		switch ((wValue & 0xff00) >> 8) {
+			case (0x01): /* device descriptor */
+				len = min_t(unsigned int,
+					  leni,
+					  min_t(unsigned int,
+					      sizeof (root_hub_dev_des),
+					      wLength));
+				data_buf = root_hub_dev_des; OK(len);
+			case (0x02): /* configuration descriptor */
+				len = min_t(unsigned int,
+					  leni,
+					  min_t(unsigned int,
+					      sizeof (root_hub_config_des),
+					      wLength));
+				data_buf = root_hub_config_des; OK(len);
+			case (0x03): /* string descriptors */
+				if(wValue==0x0300) {
+					len = min_t(unsigned int,
+						  leni,
+						  min_t(unsigned int,
+						      sizeof (root_hub_str_index0),
+						      wLength));
+					data_buf = root_hub_str_index0;
+					OK(len);
+				}
+				if(wValue==0x0301) {
+					len = min_t(unsigned int,
+						  leni,
+						  min_t(unsigned int,
+						      sizeof (root_hub_str_index1),
+						      wLength));
+					data_buf = root_hub_str_index1;
+					OK(len);
+			}
+			default:
+				stat = USB_ST_STALLED;
+		}
+		break;
+
+	case RH_GET_DESCRIPTOR | RH_CLASS:
+	    {
+		    __u32 temp = roothub_a (&gohci);
+
+		    data_buf [0] = 9;		/* min length; */
+		    data_buf [1] = 0x29;
+		    data_buf [2] = temp & RH_A_NDP;
+		    data_buf [3] = 0;
+		    if (temp & RH_A_PSM)	/* per-port power switching? */
+			data_buf [3] |= 0x1;
+		    if (temp & RH_A_NOCP)	/* no overcurrent reporting? */
+			data_buf [3] |= 0x10;
+		    else if (temp & RH_A_OCPM)	/* per-port overcurrent reporting? */
+			data_buf [3] |= 0x8;
+
+		    /* corresponds to data_buf[4-7] */
+		    datab [1] = 0;
+		    data_buf [5] = (temp & RH_A_POTPGT) >> 24;
+		    temp = roothub_b (&gohci);
+		    data_buf [7] = temp & RH_B_DR;
+		    if (data_buf [2] < 7) {
+			data_buf [8] = 0xff;
+		    } else {
+			data_buf [0] += 2;
+			data_buf [8] = (temp & RH_B_DR) >> 8;
+			data_buf [10] = data_buf [9] = 0xff;
+		    }
+
+		    len = min_t(unsigned int, leni,
+			      min_t(unsigned int, data_buf [0], wLength));
+		    OK (len);
+		}
+
+	case RH_GET_CONFIGURATION:	*(__u8 *) data_buf = 0x01; OK (1);
+
+	case RH_SET_CONFIGURATION:	WR_RH_STAT (0x10000); OK (0);
+
+	default:
+		dbg ("unsupported root hub command");
+		stat = USB_ST_STALLED;
+	}
+
+#ifdef	DEBUG
+	ohci_dump_roothub (&gohci, 1);
+#else
+	wait_ms(1);
+#endif
+
+	len = min_t(int, len, leni);
+	if (data != data_buf)
+	    memcpy (data, data_buf, len);
+	dev->act_len = len;
+	dev->status = stat;
+
+#ifdef DEBUG
+	if (transfer_len)
+		urb_priv.actual_length = transfer_len;
+	pkt_print(dev, pipe, buffer, transfer_len, cmd, "RET(rh)", 0/*usb_pipein(pipe)*/);
+#else
+	wait_ms(1);
+#endif
+
+	return stat;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* common code for handling submit messages - used for all but root hub */
+/* accesses. */
+int submit_common_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
+		int transfer_len, struct devrequest *setup, int interval)
+{
+	int stat = 0;
+	int maxsize = usb_maxpacket(dev, pipe);
+	int timeout;
+
+	/* device pulled? Shortcut the action. */
+	if (devgone == dev) {
+		dev->status = USB_ST_CRC_ERR;
+		return 0;
+	}
+
+#ifdef DEBUG
+	urb_priv.actual_length = 0;
+	pkt_print(dev, pipe, buffer, transfer_len, setup, "SUB", usb_pipein(pipe));
+#else
+	wait_ms(1);
+#endif
+	if (!maxsize) {
+		err("submit_common_message: pipesize for pipe %lx is zero",
+			pipe);
+		return -1;
+	}
+
+	if (sohci_submit_job(dev, pipe, buffer, transfer_len, setup, interval) < 0) {
+		err("sohci_submit_job failed");
+		return -1;
+	}
+
+	wait_ms(10);
+	/* ohci_dump_status(&gohci); */
+
+	/* allow more time for a BULK device to react - some are slow */
+#define BULK_TO	 5000	/* timeout in milliseconds */
+	if (usb_pipetype (pipe) == PIPE_BULK)
+		timeout = BULK_TO;
+	else
+		timeout = 100;
+
+	timeout *= 4;
+	/* wait for it to complete */
+	for (;;) {
+		/* check whether the controller is done */
+		stat = hc_interrupt();
+		if (stat < 0) {
+			stat = USB_ST_CRC_ERR;
+			break;
+		}
+		if (stat >= 0 && stat != 0xff) {
+			/* 0xff is returned for an SF-interrupt */
+			break;
+		}
+		if (--timeout) {
+			udelay(250); /* wait_ms(1); */
+		} else {
+			err("CTL:TIMEOUT ");
+			stat = USB_ST_CRC_ERR;
+			break;
+		}
+	}
+	/* we got an Root Hub Status Change interrupt */
+	if (got_rhsc) {
+#ifdef DEBUG
+		ohci_dump_roothub (&gohci, 1);
+#endif
+		got_rhsc = 0;
+		/* abuse timeout */
+		timeout = rh_check_port_status(&gohci);
+		if (timeout >= 0) {
+#if 0 /* this does nothing useful, but leave it here in case that changes */
+			/* the called routine adds 1 to the passed value */
+			usb_hub_port_connect_change(gohci.rh.dev, timeout - 1);
+#endif
+			/*
+			 * XXX
+			 * This is potentially dangerous because it assumes
+			 * that only one device is ever plugged in!
+			 */
+			devgone = dev;
+		}
+	}
+
+	dev->status = stat;
+	dev->act_len = transfer_len;
+
+#ifdef DEBUG
+	pkt_print(dev, pipe, buffer, transfer_len, setup, "RET(ctlr)", usb_pipein(pipe));
+#else
+	wait_ms(1);
+#endif
+
+	/* free TDs in urb_priv */
+	urb_free_priv (&urb_priv);
+	return 0;
+}
+
+/* submit routines called from usb.c */
+int submit_bulk_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
+		int transfer_len)
+{
+	info("submit_bulk_msg");
+	return submit_common_msg(dev, pipe, buffer, transfer_len, NULL, 0);
+}
+
+int submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
+		int transfer_len, struct devrequest *setup)
+{
+	int maxsize = usb_maxpacket(dev, pipe);
+
+	info("submit_control_msg");
+#ifdef DEBUG
+	urb_priv.actual_length = 0;
+	pkt_print(dev, pipe, buffer, transfer_len, setup, "SUB", usb_pipein(pipe));
+#else
+	wait_ms(1);
+#endif
+	if (!maxsize) {
+		err("submit_control_message: pipesize for pipe %lx is zero",
+			pipe);
+		return -1;
+	}
+	if (((pipe >> 8) & 0x7f) == gohci.rh.devnum) {
+		gohci.rh.dev = dev;
+		/* root hub - redirect */
+		return ohci_submit_rh_msg(dev, pipe, buffer, transfer_len,
+			setup);
+	}
+
+	return submit_common_msg(dev, pipe, buffer, transfer_len, setup, 0);
+}
+
+int submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
+		int transfer_len, int interval)
+{
+	info("submit_int_msg");
+	return -1;
+}
+
+/*-------------------------------------------------------------------------*
+ * HC functions
+ *-------------------------------------------------------------------------*/
+
+/* reset the HC and BUS */
+
+static int hc_reset (ohci_t *ohci)
+{
+	int timeout = 30;
+	int smm_timeout = 50; /* 0,5 sec */
+
+	if (readl (&ohci->regs->control) & OHCI_CTRL_IR) { /* SMM owns the HC */
+		writel (OHCI_OCR, &ohci->regs->cmdstatus); /* request ownership */
+		info("USB HC TakeOver from SMM");
+		while (readl (&ohci->regs->control) & OHCI_CTRL_IR) {
+			wait_ms (10);
+			if (--smm_timeout == 0) {
+				err("USB HC TakeOver failed!");
+				return -1;
+			}
+		}
+	}
+
+	/* Disable HC interrupts */
+	writel (OHCI_INTR_MIE, &ohci->regs->intrdisable);
+
+	dbg("USB HC reset_hc usb-%s: ctrl = 0x%X ;",
+		ohci->slot_name,
+		readl (&ohci->regs->control));
+
+	/* Reset USB (needed by some controllers) */
+	writel (0, &ohci->regs->control);
+
+	/* HC Reset requires max 10 us delay */
+	writel (OHCI_HCR,  &ohci->regs->cmdstatus);
+	while ((readl (&ohci->regs->cmdstatus) & OHCI_HCR) != 0) {
+		if (--timeout == 0) {
+			err("USB HC reset timed out!");
+			return -1;
+		}
+		udelay (1);
+	}
+	return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* Start an OHCI controller, set the BUS operational
+ * enable interrupts
+ * connect the virtual root hub */
+
+static int hc_start (ohci_t * ohci)
+{
+	__u32 mask;
+	unsigned int fminterval;
+
+	ohci->disabled = 1;
+
+	/* Tell the controller where the control and bulk lists are
+	 * The lists are empty now. */
+
+	writel (0, &ohci->regs->ed_controlhead);
+	writel (0, &ohci->regs->ed_bulkhead);
+
+	writel ((__u32)ohci->hcca, &ohci->regs->hcca); /* a reset clears this */
+
+	fminterval = 0x2edf;
+	writel ((fminterval * 9) / 10, &ohci->regs->periodicstart);
+	fminterval |= ((((fminterval - 210) * 6) / 7) << 16);
+	writel (fminterval, &ohci->regs->fminterval);
+	writel (0x628, &ohci->regs->lsthresh);
+
+	/* start controller operations */
+	ohci->hc_control = OHCI_CONTROL_INIT | OHCI_USB_OPER;
+	ohci->disabled = 0;
+	writel (ohci->hc_control, &ohci->regs->control);
+
+	/* disable all interrupts */
+	mask = (OHCI_INTR_SO | OHCI_INTR_WDH | OHCI_INTR_SF | OHCI_INTR_RD |
+			OHCI_INTR_UE | OHCI_INTR_FNO | OHCI_INTR_RHSC |
+			OHCI_INTR_OC | OHCI_INTR_MIE);
+	writel (mask, &ohci->regs->intrdisable);
+	/* clear all interrupts */
+	mask &= ~OHCI_INTR_MIE;
+	writel (mask, &ohci->regs->intrstatus);
+	/* Choose the interrupts we care about now  - but w/o MIE */
+	mask = OHCI_INTR_RHSC | OHCI_INTR_UE | OHCI_INTR_WDH | OHCI_INTR_SO;
+	writel (mask, &ohci->regs->intrenable);
+
+#ifdef	OHCI_USE_NPS
+	/* required for AMD-756 and some Mac platforms */
+	writel ((roothub_a (ohci) | RH_A_NPS) & ~RH_A_PSM,
+		&ohci->regs->roothub.a);
+	writel (RH_HS_LPSC, &ohci->regs->roothub.status);
+#endif	/* OHCI_USE_NPS */
+
+#define mdelay(n) ({unsigned long msec=(n); while (msec--) udelay(1000);})
+	/* POTPGT delay is bits 24-31, in 2 ms units. */
+	mdelay ((roothub_a (ohci) >> 23) & 0x1fe);
+
+	/* connect the virtual root hub */
+	ohci->rh.devnum = 0;
+
+	return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* an interrupt happens */
+
+static int
+hc_interrupt (void)
+{
+	ohci_t *ohci = &gohci;
+	struct ohci_regs *regs = ohci->regs;
+	int ints;
+	int stat = -1;
+
+	if ((ohci->hcca->done_head != 0) && !(m32_swap (ohci->hcca->done_head) & 0x01)) {
+		ints =	OHCI_INTR_WDH;
+	} else {
+		ints = readl (&regs->intrstatus);
+	}
+
+	/* dbg("Interrupt: %x frame: %x", ints, le16_to_cpu (ohci->hcca->frame_no)); */
+
+	if (ints & OHCI_INTR_RHSC) {
+		got_rhsc = 1;
+	}
+
+	if (ints & OHCI_INTR_UE) {
+		ohci->disabled++;
+		err ("OHCI Unrecoverable Error, controller usb-%s disabled",
+			ohci->slot_name);
+		/* e.g. due to PCI Master/Target Abort */
+
+#ifdef	DEBUG
+		ohci_dump (ohci, 1);
+#else
+	wait_ms(1);
+#endif
+		/* FIXME: be optimistic, hope that bug won't repeat often. */
+		/* Make some non-interrupt context restart the controller. */
+		/* Count and limit the retries though; either hardware or */
+		/* software errors can go forever... */
+		hc_reset (ohci);
+		return -1;
+	}
+
+	if (ints & OHCI_INTR_WDH) {
+		wait_ms(1);
+		writel (OHCI_INTR_WDH, &regs->intrdisable);
+		stat = dl_done_list (&gohci, dl_reverse_done_list (&gohci));
+		writel (OHCI_INTR_WDH, &regs->intrenable);
+	}
+
+	if (ints & OHCI_INTR_SO) {
+		dbg("USB Schedule overrun\n");
+		writel (OHCI_INTR_SO, &regs->intrenable);
+		stat = -1;
+	}
+
+	/* FIXME:  this assumes SOF (1/ms) interrupts don't get lost... */
+	if (ints & OHCI_INTR_SF) {
+		unsigned int frame = m16_swap (ohci->hcca->frame_no) & 1;
+		wait_ms(1);
+		writel (OHCI_INTR_SF, &regs->intrdisable);
+		if (ohci->ed_rm_list[frame] != NULL)
+			writel (OHCI_INTR_SF, &regs->intrenable);
+		stat = 0xff;
+	}
+
+	writel (ints, &regs->intrstatus);
+	return stat;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/*-------------------------------------------------------------------------*/
+
+/* De-allocate all resources.. */
+
+static void hc_release_ohci (ohci_t *ohci)
+{
+	dbg ("USB HC release ohci usb-%s", ohci->slot_name);
+
+	if (!ohci->disabled)
+		hc_reset (ohci);
+}
+
+/*-------------------------------------------------------------------------*/
+
+#define __read_32bit_c0_register(source, sel)				\
+({ int __res;								\
+	if (sel == 0)							\
+		__asm__ __volatile__(					\
+			"mfc0\t%0, " #source "\n\t"			\
+			: "=r" (__res));				\
+	else								\
+		__asm__ __volatile__(					\
+			".set\tmips32\n\t"				\
+			"mfc0\t%0, " #source ", " #sel "\n\t"		\
+			".set\tmips0\n\t"				\
+			: "=r" (__res));				\
+	__res;								\
+})
+
+#define read_c0_prid()		__read_32bit_c0_register($15, 0)
+
+/*
+ * low level initalisation routine, called from usb.c
+ */
+static char ohci_inited = 0;
+
+int usb_lowlevel_init(void)
+{
+	u32 pin_func;
+	u32 sys_freqctrl, sys_clksrc;
+	u32 prid = read_c0_prid();
+
+	dbg("in usb_lowlevel_init\n");
+
+	/* zero and disable FREQ2 */
+	sys_freqctrl = au_readl(SYS_FREQCTRL0);
+	sys_freqctrl &= ~0xFFF00000;
+	au_writel(sys_freqctrl, SYS_FREQCTRL0);
+
+	/* zero and disable USBH/USBD clocks */
+	sys_clksrc = au_readl(SYS_CLKSRC);
+	sys_clksrc &= ~0x00007FE0;
+	au_writel(sys_clksrc, SYS_CLKSRC);
+
+	sys_freqctrl = au_readl(SYS_FREQCTRL0);
+	sys_freqctrl &= ~0xFFF00000;
+
+	sys_clksrc = au_readl(SYS_CLKSRC);
+	sys_clksrc &= ~0x00007FE0;
+
+	switch (prid & 0x000000FF) {
+	case 0x00: /* DA */
+	case 0x01: /* HA */
+	case 0x02: /* HB */
+		/* CPU core freq to 48MHz to slow it way down... */
+		au_writel(4, SYS_CPUPLL);
+
+		/*
+		 * Setup 48MHz FREQ2 from CPUPLL for USB Host
+		 */
+		/* FRDIV2=3 -> div by 8 of 384MHz -> 48MHz */
+		sys_freqctrl |= ((3<<22) | (1<<21) | (0<<20));
+		au_writel(sys_freqctrl, SYS_FREQCTRL0);
+
+		/* CPU core freq to 384MHz */
+		au_writel(0x20, SYS_CPUPLL);
+
+		printf("Au1000: 48MHz OHCI workaround enabled\n");
+		break;
+
+	default:  /* HC and newer */
+		/* FREQ2 = aux/2 = 48 MHz */
+		sys_freqctrl |= ((0<<22) | (1<<21) | (1<<20));
+		au_writel(sys_freqctrl, SYS_FREQCTRL0);
+		break;
+	}
+
+	/*
+	 * Route 48MHz FREQ2 into USB Host and/or Device
+	 */
+	sys_clksrc |= ((4<<12) | (0<<11) | (0<<10));
+	au_writel(sys_clksrc, SYS_CLKSRC);
+
+	/* configure pins GPIO[14:9] as GPIO */
+	pin_func = au_readl(SYS_PINFUNC) & (u32)(~0x8080);
+
+	au_writel(pin_func, SYS_PINFUNC);
+	au_writel(0x2800, SYS_TRIOUTCLR);
+	au_writel(0x0030, SYS_OUTPUTCLR);
+
+	dbg("OHCI board setup complete\n");
+
+	/* enable host controller */
+	au_writel(USBH_ENABLE_CE, USB_HOST_CONFIG);
+	udelay(1000);
+	au_writel(USBH_ENABLE_INIT, USB_HOST_CONFIG);
+	udelay(1000);
+
+	/* wait for reset complete (read register twice; see au1500 errata) */
+	while (au_readl(USB_HOST_CONFIG),
+	       !(au_readl(USB_HOST_CONFIG) & USBH_ENABLE_RD))
+		udelay(1000);
+
+	dbg("OHCI clock running\n");
+
+	memset (&gohci, 0, sizeof (ohci_t));
+	memset (&urb_priv, 0, sizeof (urb_priv_t));
+
+	/* align the storage */
+	if ((__u32)&ghcca[0] & 0xff) {
+		err("HCCA not aligned!!");
+		return -1;
+	}
+	phcca = &ghcca[0];
+	info("aligned ghcca %p", phcca);
+	memset(&ohci_dev, 0, sizeof(struct ohci_device));
+	if ((__u32)&ohci_dev.ed[0] & 0x7) {
+		err("EDs not aligned!!");
+		return -1;
+	}
+	memset(gtd, 0, sizeof(td_t) * (NUM_TD + 1));
+	if ((__u32)gtd & 0x7) {
+		err("TDs not aligned!!");
+		return -1;
+	}
+	ptd = gtd;
+	gohci.hcca = phcca;
+	memset (phcca, 0, sizeof (struct ohci_hcca));
+
+	gohci.disabled = 1;
+	gohci.sleeping = 0;
+	gohci.irq = -1;
+	gohci.regs = (struct ohci_regs *)(USB_OHCI_BASE | 0xA0000000);
+
+	gohci.flags = 0;
+	gohci.slot_name = "au1x00";
+
+	dbg("OHCI revision: 0x%08x\n"
+	       "  RH: a: 0x%08x b: 0x%08x\n",
+	       readl(&gohci.regs->revision),
+	       readl(&gohci.regs->roothub.a), readl(&gohci.regs->roothub.b));
+
+	if (hc_reset (&gohci) < 0)
+		goto errout;
+
+	/* FIXME this is a second HC reset; why?? */
+	writel (gohci.hc_control = OHCI_USB_RESET, &gohci.regs->control);
+	wait_ms (10);
+
+	if (hc_start (&gohci) < 0)
+		goto errout;
+
+#ifdef	DEBUG
+	ohci_dump (&gohci, 1);
+#else
+	wait_ms(1);
+#endif
+	ohci_inited = 1;
+	return 0;
+
+  errout:
+	err("OHCI initialization error\n");
+	hc_release_ohci (&gohci);
+	/* Initialization failed */
+	au_writel(readl(USB_HOST_CONFIG) & ~USBH_ENABLE_CE, USB_HOST_CONFIG);
+	return -1;
+}
+
+int usb_lowlevel_stop(void)
+{
+	/* this gets called really early - before the controller has */
+	/* even been initialized! */
+	if (!ohci_inited)
+		return 0;
+	/* TODO release any interrupts, etc. */
+	/* call hc_release_ohci() here ? */
+	hc_reset (&gohci);
+	/* may not want to do this */
+	/* Disable clock */
+	au_writel(readl(USB_HOST_CONFIG) & ~USBH_ENABLE_CE, USB_HOST_CONFIG);
+	return 0;
+}
+
+#endif /* CONFIG_USB_OHCI */
diff --git a/cpu/mips/au1x00_usb_ohci.h b/cpu/mips/au1x00_usb_ohci.h
new file mode 100644
index 0000000..4ef06ff
--- /dev/null
+++ b/cpu/mips/au1x00_usb_ohci.h
@@ -0,0 +1,416 @@
+/*
+ * URB OHCI HCD (Host Controller Driver) for USB.
+ *
+ * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
+ * (C) Copyright 2000-2001 David Brownell <dbrownell@users.sourceforge.net>
+ *
+ * usb-ohci.h
+ */
+
+
+static int cc_to_error[16] = {
+
+/* mapping of the OHCI CC status to error codes */
+	/* No  Error  */               0,
+	/* CRC Error  */               USB_ST_CRC_ERR,
+	/* Bit Stuff  */               USB_ST_BIT_ERR,
+	/* Data Togg  */               USB_ST_CRC_ERR,
+	/* Stall      */               USB_ST_STALLED,
+	/* DevNotResp */               -1,
+	/* PIDCheck   */               USB_ST_BIT_ERR,
+	/* UnExpPID   */               USB_ST_BIT_ERR,
+	/* DataOver   */               USB_ST_BUF_ERR,
+	/* DataUnder  */               USB_ST_BUF_ERR,
+	/* reservd    */               -1,
+	/* reservd    */               -1,
+	/* BufferOver */               USB_ST_BUF_ERR,
+	/* BuffUnder  */               USB_ST_BUF_ERR,
+	/* Not Access */               -1,
+	/* Not Access */               -1
+};
+
+/* ED States */
+
+#define ED_NEW 		0x00
+#define ED_UNLINK 	0x01
+#define ED_OPER		0x02
+#define ED_DEL		0x04
+#define ED_URB_DEL  	0x08
+
+/* usb_ohci_ed */
+struct ed {
+	__u32 hwINFO;
+	__u32 hwTailP;
+	__u32 hwHeadP;
+	__u32 hwNextED;
+
+	struct ed *ed_prev;
+	__u8 int_period;
+	__u8 int_branch;
+	__u8 int_load;
+	__u8 int_interval;
+	__u8 state;
+	__u8 type;
+	__u16 last_iso;
+	struct ed *ed_rm_list;
+
+	struct usb_device *usb_dev;
+	__u32 unused[3];
+} __attribute((aligned(16)));
+typedef struct ed ed_t;
+
+
+/* TD info field */
+#define TD_CC       0xf0000000
+#define TD_CC_GET(td_p) ((td_p >>28) & 0x0f)
+#define TD_CC_SET(td_p, cc) (td_p) = ((td_p) & 0x0fffffff) | (((cc) & 0x0f) << 28)
+#define TD_EC       0x0C000000
+#define TD_T        0x03000000
+#define TD_T_DATA0  0x02000000
+#define TD_T_DATA1  0x03000000
+#define TD_T_TOGGLE 0x00000000
+#define TD_R        0x00040000
+#define TD_DI       0x00E00000
+#define TD_DI_SET(X) (((X) & 0x07)<< 21)
+#define TD_DP       0x00180000
+#define TD_DP_SETUP 0x00000000
+#define TD_DP_IN    0x00100000
+#define TD_DP_OUT   0x00080000
+
+#define TD_ISO	    0x00010000
+#define TD_DEL      0x00020000
+
+/* CC Codes */
+#define TD_CC_NOERROR      0x00
+#define TD_CC_CRC          0x01
+#define TD_CC_BITSTUFFING  0x02
+#define TD_CC_DATATOGGLEM  0x03
+#define TD_CC_STALL        0x04
+#define TD_DEVNOTRESP      0x05
+#define TD_PIDCHECKFAIL    0x06
+#define TD_UNEXPECTEDPID   0x07
+#define TD_DATAOVERRUN     0x08
+#define TD_DATAUNDERRUN    0x09
+#define TD_BUFFEROVERRUN   0x0C
+#define TD_BUFFERUNDERRUN  0x0D
+#define TD_NOTACCESSED     0x0F
+
+
+#define MAXPSW 1
+
+struct td {
+	__u32 hwINFO;
+  	__u32 hwCBP;		/* Current Buffer Pointer */
+  	__u32 hwNextTD;		/* Next TD Pointer */
+  	__u32 hwBE;		/* Memory Buffer End Pointer */
+
+  	__u16 hwPSW[MAXPSW];
+  	__u8 unused;
+  	__u8 index;
+  	struct ed *ed;
+  	struct td *next_dl_td;
+	struct usb_device *usb_dev;
+	int transfer_len;
+	__u32 data;
+
+	__u32 unused2[2];
+} __attribute((aligned(32)));
+typedef struct td td_t;
+
+#define OHCI_ED_SKIP	(1 << 14)
+
+/*
+ * The HCCA (Host Controller Communications Area) is a 256 byte
+ * structure defined in the OHCI spec. that the host controller is
+ * told the base address of.  It must be 256-byte aligned.
+ */
+
+#define NUM_INTS 32	/* part of the OHCI standard */
+struct ohci_hcca {
+	__u32	int_table[NUM_INTS];	/* Interrupt ED table */
+	__u16	frame_no;		/* current frame number */
+	__u16	pad1;			/* set to 0 on each frame_no change */
+	__u32	done_head;		/* info returned for an interrupt */
+	u8		reserved_for_hc[116];
+} __attribute((aligned(256)));
+
+
+/*
+ * Maximum number of root hub ports.
+ */
+#define MAX_ROOT_PORTS	15	/* maximum OHCI root hub ports */
+
+/*
+ * This is the structure of the OHCI controller's memory mapped I/O
+ * region.  This is Memory Mapped I/O.  You must use the readl() and
+ * writel() macros defined in asm/io.h to access these!!
+ */
+struct ohci_regs {
+	/* control and status registers */
+	__u32	revision;
+	__u32	control;
+	__u32	cmdstatus;
+	__u32	intrstatus;
+	__u32	intrenable;
+	__u32	intrdisable;
+	/* memory pointers */
+	__u32	hcca;
+	__u32	ed_periodcurrent;
+	__u32	ed_controlhead;
+	__u32	ed_controlcurrent;
+	__u32	ed_bulkhead;
+	__u32	ed_bulkcurrent;
+	__u32	donehead;
+	/* frame counters */
+	__u32	fminterval;
+	__u32	fmremaining;
+	__u32	fmnumber;
+	__u32	periodicstart;
+	__u32	lsthresh;
+	/* Root hub ports */
+	struct	ohci_roothub_regs {
+		__u32	a;
+		__u32	b;
+		__u32	status;
+		__u32	portstatus[MAX_ROOT_PORTS];
+	} roothub;
+} __attribute((aligned(32)));
+
+
+/* OHCI CONTROL AND STATUS REGISTER MASKS */
+
+/*
+ * HcControl (control) register masks
+ */
+#define OHCI_CTRL_CBSR	(3 << 0)	/* control/bulk service ratio */
+#define OHCI_CTRL_PLE	(1 << 2)	/* periodic list enable */
+#define OHCI_CTRL_IE	(1 << 3)	/* isochronous enable */
+#define OHCI_CTRL_CLE	(1 << 4)	/* control list enable */
+#define OHCI_CTRL_BLE	(1 << 5)	/* bulk list enable */
+#define OHCI_CTRL_HCFS	(3 << 6)	/* host controller functional state */
+#define OHCI_CTRL_IR	(1 << 8)	/* interrupt routing */
+#define OHCI_CTRL_RWC	(1 << 9)	/* remote wakeup connected */
+#define OHCI_CTRL_RWE	(1 << 10)	/* remote wakeup enable */
+
+/* pre-shifted values for HCFS */
+#	define OHCI_USB_RESET	(0 << 6)
+#	define OHCI_USB_RESUME	(1 << 6)
+#	define OHCI_USB_OPER	(2 << 6)
+#	define OHCI_USB_SUSPEND	(3 << 6)
+
+/*
+ * HcCommandStatus (cmdstatus) register masks
+ */
+#define OHCI_HCR	(1 << 0)	/* host controller reset */
+#define OHCI_CLF  	(1 << 1)	/* control list filled */
+#define OHCI_BLF  	(1 << 2)	/* bulk list filled */
+#define OHCI_OCR  	(1 << 3)	/* ownership change request */
+#define OHCI_SOC  	(3 << 16)	/* scheduling overrun count */
+
+/*
+ * masks used with interrupt registers:
+ * HcInterruptStatus (intrstatus)
+ * HcInterruptEnable (intrenable)
+ * HcInterruptDisable (intrdisable)
+ */
+#define OHCI_INTR_SO	(1 << 0)	/* scheduling overrun */
+#define OHCI_INTR_WDH	(1 << 1)	/* writeback of done_head */
+#define OHCI_INTR_SF	(1 << 2)	/* start frame */
+#define OHCI_INTR_RD	(1 << 3)	/* resume detect */
+#define OHCI_INTR_UE	(1 << 4)	/* unrecoverable error */
+#define OHCI_INTR_FNO	(1 << 5)	/* frame number overflow */
+#define OHCI_INTR_RHSC	(1 << 6)	/* root hub status change */
+#define OHCI_INTR_OC	(1 << 30)	/* ownership change */
+#define OHCI_INTR_MIE	(1 << 31)	/* master interrupt enable */
+
+
+/* Virtual Root HUB */
+struct virt_root_hub {
+	int devnum; /* Address of Root Hub endpoint */
+	void *dev;  /* was urb */
+	void *int_addr;
+	int send;
+	int interval;
+};
+
+/* USB HUB CONSTANTS (not OHCI-specific; see hub.h) */
+
+/* destination of request */
+#define RH_INTERFACE               0x01
+#define RH_ENDPOINT                0x02
+#define RH_OTHER                   0x03
+
+#define RH_CLASS                   0x20
+#define RH_VENDOR                  0x40
+
+/* Requests: bRequest << 8 | bmRequestType */
+#define RH_GET_STATUS           0x0080
+#define RH_CLEAR_FEATURE        0x0100
+#define RH_SET_FEATURE          0x0300
+#define RH_SET_ADDRESS		0x0500
+#define RH_GET_DESCRIPTOR	0x0680
+#define RH_SET_DESCRIPTOR       0x0700
+#define RH_GET_CONFIGURATION	0x0880
+#define RH_SET_CONFIGURATION	0x0900
+#define RH_GET_STATE            0x0280
+#define RH_GET_INTERFACE        0x0A80
+#define RH_SET_INTERFACE        0x0B00
+#define RH_SYNC_FRAME           0x0C80
+/* Our Vendor Specific Request */
+#define RH_SET_EP               0x2000
+
+
+/* Hub port features */
+#define RH_PORT_CONNECTION         0x00
+#define RH_PORT_ENABLE             0x01
+#define RH_PORT_SUSPEND            0x02
+#define RH_PORT_OVER_CURRENT       0x03
+#define RH_PORT_RESET              0x04
+#define RH_PORT_POWER              0x08
+#define RH_PORT_LOW_SPEED          0x09
+
+#define RH_C_PORT_CONNECTION       0x10
+#define RH_C_PORT_ENABLE           0x11
+#define RH_C_PORT_SUSPEND          0x12
+#define RH_C_PORT_OVER_CURRENT     0x13
+#define RH_C_PORT_RESET            0x14
+
+/* Hub features */
+#define RH_C_HUB_LOCAL_POWER       0x00
+#define RH_C_HUB_OVER_CURRENT      0x01
+
+#define RH_DEVICE_REMOTE_WAKEUP    0x00
+#define RH_ENDPOINT_STALL          0x01
+
+#define RH_ACK                     0x01
+#define RH_REQ_ERR                 -1
+#define RH_NACK                    0x00
+
+
+/* OHCI ROOT HUB REGISTER MASKS */
+
+/* roothub.portstatus [i] bits */
+#define RH_PS_CCS            0x00000001   	/* current connect status */
+#define RH_PS_PES            0x00000002   	/* port enable status*/
+#define RH_PS_PSS            0x00000004   	/* port suspend status */
+#define RH_PS_POCI           0x00000008   	/* port over current indicator */
+#define RH_PS_PRS            0x00000010  	/* port reset status */
+#define RH_PS_PPS            0x00000100   	/* port power status */
+#define RH_PS_LSDA           0x00000200    	/* low speed device attached */
+#define RH_PS_CSC            0x00010000 	/* connect status change */
+#define RH_PS_PESC           0x00020000   	/* port enable status change */
+#define RH_PS_PSSC           0x00040000    	/* port suspend status change */
+#define RH_PS_OCIC           0x00080000    	/* over current indicator change */
+#define RH_PS_PRSC           0x00100000   	/* port reset status change */
+
+/* roothub.status bits */
+#define RH_HS_LPS	     0x00000001		/* local power status */
+#define RH_HS_OCI	     0x00000002		/* over current indicator */
+#define RH_HS_DRWE	     0x00008000		/* device remote wakeup enable */
+#define RH_HS_LPSC	     0x00010000		/* local power status change */
+#define RH_HS_OCIC	     0x00020000		/* over current indicator change */
+#define RH_HS_CRWE	     0x80000000		/* clear remote wakeup enable */
+
+/* roothub.b masks */
+#define RH_B_DR		0x0000ffff		/* device removable flags */
+#define RH_B_PPCM	0xffff0000		/* port power control mask */
+
+/* roothub.a masks */
+#define	RH_A_NDP	(0xff << 0)		/* number of downstream ports */
+#define	RH_A_PSM	(1 << 8)		/* power switching mode */
+#define	RH_A_NPS	(1 << 9)		/* no power switching */
+#define	RH_A_DT		(1 << 10)		/* device type (mbz) */
+#define	RH_A_OCPM	(1 << 11)		/* over current protection mode */
+#define	RH_A_NOCP	(1 << 12)		/* no over current protection */
+#define	RH_A_POTPGT	(0xff << 24)		/* power on to power good time */
+
+/* urb */
+#define N_URB_TD 48
+typedef struct
+{
+	ed_t *ed;
+	__u16 length;	/* number of tds associated with this request */
+	__u16 td_cnt;	/* number of tds already serviced */
+	int   state;
+	unsigned long pipe;
+	int actual_length;
+	td_t *td[N_URB_TD];	/* list pointer to all corresponding TDs associated with this request */
+} urb_priv_t;
+#define URB_DEL 1
+
+/*
+ * This is the full ohci controller description
+ *
+ * Note how the "proper" USB information is just
+ * a subset of what the full implementation needs. (Linus)
+ */
+
+
+typedef struct ohci {
+	struct ohci_hcca *hcca;		/* hcca */
+	/*dma_addr_t hcca_dma;*/
+
+	int irq;
+	int disabled;			/* e.g. got a UE, we're hung */
+	int sleeping;
+	unsigned long flags;		/* for HC bugs */
+
+	struct ohci_regs *regs;	/* OHCI controller's memory */
+
+	ed_t *ed_rm_list[2];     /* lists of all endpoints to be removed */
+	ed_t *ed_bulktail;       /* last endpoint of bulk list */
+	ed_t *ed_controltail;    /* last endpoint of control list */
+	int intrstatus;
+	__u32 hc_control;		/* copy of the hc control reg */
+	struct usb_device *dev[32];
+	struct virt_root_hub rh;
+
+	const char	*slot_name;
+} ohci_t;
+
+#define NUM_EDS 8		/* num of preallocated endpoint descriptors */
+
+struct ohci_device {
+	ed_t 	ed[NUM_EDS];
+	int ed_cnt;
+};
+
+/* hcd */
+/* endpoint */
+static int ep_link(ohci_t * ohci, ed_t * ed);
+static int ep_unlink(ohci_t * ohci, ed_t * ed);
+static ed_t * ep_add_ed(struct usb_device * usb_dev, unsigned long pipe);
+
+/*-------------------------------------------------------------------------*/
+
+/* we need more TDs than EDs */
+#define NUM_TD 64
+
+/* +1 so we can align the storage */
+td_t gtd[NUM_TD+1];
+/* pointers to aligned storage */
+td_t *ptd;
+
+/* TDs ... */
+static inline struct td *
+td_alloc (struct usb_device *usb_dev)
+{
+	int i;
+	struct td	*td;
+
+	td = NULL;
+	for (i = 0; i < NUM_TD; i++) {
+		if (ptd[i].usb_dev == NULL) {
+			td = &ptd[i];
+			td->usb_dev = usb_dev;
+			break;
+		}
+	}
+	return td;
+}
+
+static inline void
+ed_free (struct ed *ed)
+{
+	ed->usb_dev = NULL;
+}
diff --git a/cpu/ppc4xx/4xx_enet.c b/cpu/ppc4xx/4xx_enet.c
index 4809026..34f6e97 100644
--- a/cpu/ppc4xx/4xx_enet.c
+++ b/cpu/ppc4xx/4xx_enet.c
@@ -1,80 +1,80 @@
 /*-----------------------------------------------------------------------------+
  *
- *       This source code has been made available to you by IBM on an AS-IS
- *       basis.  Anyone receiving this source is licensed under IBM
- *       copyrights to use it in any way he or she deems fit, including
- *       copying it, modifying it, compiling it, and redistributing it either
- *       with or without modifications.  No license under IBM patents or
- *       patent applications is to be implied by the copyright license.
+ *	 This source code has been made available to you by IBM on an AS-IS
+ *	 basis.	 Anyone receiving this source is licensed under IBM
+ *	 copyrights to use it in any way he or she deems fit, including
+ *	 copying it, modifying it, compiling it, and redistributing it either
+ *	 with or without modifications.	 No license under IBM patents or
+ *	 patent applications is to be implied by the copyright license.
  *
- *       Any user of this software should understand that IBM cannot provide
- *       technical support for this software and will not be responsible for
- *       any consequences resulting from the use of this software.
+ *	 Any user of this software should understand that IBM cannot provide
+ *	 technical support for this software and will not be responsible for
+ *	 any consequences resulting from the use of this software.
  *
- *       Any person who transfers this source code or any derivative work
- *       must include the IBM copyright notice, this paragraph, and the
- *       preceding two paragraphs in the transferred software.
+ *	 Any person who transfers this source code or any derivative work
+ *	 must include the IBM copyright notice, this paragraph, and the
+ *	 preceding two paragraphs in the transferred software.
  *
- *       COPYRIGHT   I B M   CORPORATION 1995
- *       LICENSED MATERIAL  -  PROGRAM PROPERTY OF I B M
+ *	 COPYRIGHT   I B M   CORPORATION 1995
+ *	 LICENSED MATERIAL  -  PROGRAM PROPERTY OF I B M
  *-----------------------------------------------------------------------------*/
 /*-----------------------------------------------------------------------------+
  *
- *  File Name:  enetemac.c
+ *  File Name:	enetemac.c
  *
- *  Function:   Device driver for the ethernet EMAC3 macro on the 405GP.
+ *  Function:	Device driver for the ethernet EMAC3 macro on the 405GP.
  *
- *  Author:     Mark Wisner
+ *  Author:	Mark Wisner
  *
  *  Change Activity-
  *
- *  Date        Description of Change                                       BY
- *  ---------   ---------------------                                       ---
- *  05-May-99   Created                                                     MKW
- *  27-Jun-99   Clean up                                                    JWB
- *  16-Jul-99   Added MAL error recovery and better IP packet handling      MKW
- *  29-Jul-99   Added Full duplex support                                   MKW
- *  06-Aug-99   Changed names for Mal CR reg                                MKW
- *  23-Aug-99   Turned off SYE when running at 10Mbs                        MKW
- *  24-Aug-99   Marked descriptor empty after call_xlc                      MKW
- *  07-Sep-99   Set MAL RX buffer size reg to ENET_MAX_MTU_ALIGNED / 16     MCG
- *              to avoid chaining maximum sized packets. Push starting
- *              RX descriptor address up to the next cache line boundary.
- *  16-Jan-00   Added support for booting with IP of 0x0                    MKW
- *  15-Mar-00   Updated enetInit() to enable broadcast addresses in the
- *	        EMAC_RXM register.                                          JWB
- *  12-Mar-01   anne-sophie.harnois@nextream.fr
- *               - Variables are compatible with those already defined in
- *                include/net.h
- *              - Receive buffer descriptor ring is used to send buffers
- *                to the user
- *              - Info print about send/received/handled packet number if
- *                INFO_405_ENET is set
- *  17-Apr-01   stefan.roese@esd-electronics.com
- *              - MAL reset in "eth_halt" included
- *              - Enet speed and duplex output now in one line
- *  08-May-01   stefan.roese@esd-electronics.com
- *              - MAL error handling added (eth_init called again)
- *  13-Nov-01   stefan.roese@esd-electronics.com
- *              - Set IST bit in EMAC_M1 reg upon 100MBit or full duplex
- *  04-Jan-02   stefan.roese@esd-electronics.com
- *              - Wait for PHY auto negotiation to complete added
- *  06-Feb-02   stefan.roese@esd-electronics.com
- *              - Bug fixed in waiting for auto negotiation to complete
- *  26-Feb-02   stefan.roese@esd-electronics.com
- *              - rx and tx buffer descriptors now allocated (no fixed address
- *                used anymore)
- *  17-Jun-02   stefan.roese@esd-electronics.com
- *              - MAL error debug printf 'M' removed (rx de interrupt may
- *                occur upon many incoming packets with only 4 rx buffers).
+ *  Date	Description of Change					    BY
+ *  ---------	---------------------					    ---
+ *  05-May-99	Created							    MKW
+ *  27-Jun-99	Clean up						    JWB
+ *  16-Jul-99	Added MAL error recovery and better IP packet handling	    MKW
+ *  29-Jul-99	Added Full duplex support				    MKW
+ *  06-Aug-99	Changed names for Mal CR reg				    MKW
+ *  23-Aug-99	Turned off SYE when running at 10Mbs			    MKW
+ *  24-Aug-99	Marked descriptor empty after call_xlc			    MKW
+ *  07-Sep-99	Set MAL RX buffer size reg to ENET_MAX_MTU_ALIGNED / 16	    MCG
+ *		to avoid chaining maximum sized packets. Push starting
+ *		RX descriptor address up to the next cache line boundary.
+ *  16-Jan-00	Added support for booting with IP of 0x0		    MKW
+ *  15-Mar-00	Updated enetInit() to enable broadcast addresses in the
+ *		EMAC_RXM register.					    JWB
+ *  12-Mar-01	anne-sophie.harnois@nextream.fr
+ *		 - Variables are compatible with those already defined in
+ *		  include/net.h
+ *		- Receive buffer descriptor ring is used to send buffers
+ *		  to the user
+ *		- Info print about send/received/handled packet number if
+ *		  INFO_405_ENET is set
+ *  17-Apr-01	stefan.roese@esd-electronics.com
+ *		- MAL reset in "eth_halt" included
+ *		- Enet speed and duplex output now in one line
+ *  08-May-01	stefan.roese@esd-electronics.com
+ *		- MAL error handling added (eth_init called again)
+ *  13-Nov-01	stefan.roese@esd-electronics.com
+ *		- Set IST bit in EMAC_M1 reg upon 100MBit or full duplex
+ *  04-Jan-02	stefan.roese@esd-electronics.com
+ *		- Wait for PHY auto negotiation to complete added
+ *  06-Feb-02	stefan.roese@esd-electronics.com
+ *		- Bug fixed in waiting for auto negotiation to complete
+ *  26-Feb-02	stefan.roese@esd-electronics.com
+ *		- rx and tx buffer descriptors now allocated (no fixed address
+ *		  used anymore)
+ *  17-Jun-02	stefan.roese@esd-electronics.com
+ *		- MAL error debug printf 'M' removed (rx de interrupt may
+ *		  occur upon many incoming packets with only 4 rx buffers).
  *-----------------------------------------------------------------------------*
- *  17-Nov-03   travis.sawyer@sandburst.com
- *              - ported from 405gp_enet.c to utilized upto 4 EMAC ports
- *                in the 440GX.  This port should work with the 440GP
- *                (2 EMACs) also
- *  15-Aug-05   sr@denx.de
- *              - merged 405gp_enet.c and 440gx_enet.c to generic 4xx_enet.c
-                  now handling all 4xx cpu's.
+ *  17-Nov-03	travis.sawyer@sandburst.com
+ *		- ported from 405gp_enet.c to utilized upto 4 EMAC ports
+ *		  in the 440GX.	 This port should work with the 440GP
+ *		  (2 EMACs) also
+ *  15-Aug-05	sr@denx.de
+ *		- merged 405gp_enet.c and 440gx_enet.c to generic 4xx_enet.c
+		  now handling all 4xx cpu's.
  *-----------------------------------------------------------------------------*/
 
 #include <config.h>
@@ -100,7 +100,7 @@
 #error "CONFIG_MII has to be defined!"
 #endif
 
-#define EMAC_RESET_TIMEOUT 1000	/* 1000 ms reset timeout */
+#define EMAC_RESET_TIMEOUT 1000 /* 1000 ms reset timeout */
 #define PHY_AUTONEGOTIATE_TIMEOUT 4000	/* 4000 ms autonegotiate timeout */
 
 /* Ethernet Transmit and Receive Buffers */
@@ -108,12 +108,12 @@
  * In the same way ENET_MAX_MTU and ENET_MAX_MTU_ALIGNED are set from
  * PKTSIZE and PKTSIZE_ALIGN (include/net.h)
  */
-#define ENET_MAX_MTU           PKTSIZE
+#define ENET_MAX_MTU	       PKTSIZE
 #define ENET_MAX_MTU_ALIGNED   PKTSIZE_ALIGN
 
 /* define the number of channels implemented */
-#define EMAC_RXCHL      EMAC_NUM_DEV
-#define EMAC_TXCHL      EMAC_NUM_DEV
+#define EMAC_RXCHL	EMAC_NUM_DEV
+#define EMAC_TXCHL	EMAC_NUM_DEV
 
 /*-----------------------------------------------------------------------------+
  * Defines for MAL/EMAC interrupt conditions as reported in the UIC (Universal
@@ -127,8 +127,8 @@
 
 #undef INFO_4XX_ENET
 
-#define BI_PHYMODE_NONE  0
-#define BI_PHYMODE_ZMII  1
+#define BI_PHYMODE_NONE	 0
+#define BI_PHYMODE_ZMII	 1
 #define BI_PHYMODE_RGMII 2
 
 
@@ -322,7 +322,7 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
 #ifdef INFO_4XX_ENET
 	/* AS.HARNOIS
 	 * We should have :
-	 * hw_p->stats.pkts_handled <=  hw_p->stats.pkts_rx <= hw_p->stats.pkts_handled+PKTBUFSRX
+	 * hw_p->stats.pkts_handled <=	hw_p->stats.pkts_rx <= hw_p->stats.pkts_handled+PKTBUFSRX
 	 * In the most cases hw_p->stats.pkts_handled = hw_p->stats.pkts_rx, but it
 	 * is possible that new packets (without relationship with
 	 * current transfer) have got the time to arrived before
@@ -341,8 +341,8 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
 	hw_p->stats.pkts_handled = 0;
 #endif
 
-	hw_p->tx_err_index = 0;	/* Transmit Error Index for tx_err_log */
-	hw_p->rx_err_index = 0;	/* Receive Error Index for rx_err_log */
+	hw_p->tx_err_index = 0; /* Transmit Error Index for tx_err_log */
+	hw_p->rx_err_index = 0; /* Receive Error Index for rx_err_log */
 
 	hw_p->rx_slot = 0;	/* MAL Receive Slot */
 	hw_p->rx_i_index = 0;	/* Receive Interrupt Queue Index */
@@ -362,7 +362,7 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
 	udelay (100);
 
 #if defined(CONFIG_440EP) || defined(CONFIG_440GR)
-   	out32 (ZMII_FER, (ZMII_FER_RMII | ZMII_FER_MDI) << ZMII_FER_V (devnum));
+	out32 (ZMII_FER, (ZMII_FER_RMII | ZMII_FER_MDI) << ZMII_FER_V (devnum));
 #elif defined(CONFIG_440GX)
 	ethgroup = ppc_4xx_eth_setup_bridge(devnum, bis);
 #elif defined(CONFIG_440GP)
@@ -641,7 +641,7 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
 	for (i = 0; i < NUM_RX_BUFF; i++) {
 		hw_p->rx[i].ctrl = 0;
 		hw_p->rx[i].data_len = 0;
-		/*       rx[i].data_ptr = (char *) &rx_buff[i]; */
+		/*	 rx[i].data_ptr = (char *) &rx_buff[i]; */
 		hw_p->rx[i].data_ptr = (char *) NetRxPackets[i];
 		if ((NUM_RX_BUFF - 1) == i)
 			hw_p->rx[i].ctrl |= MAL_RX_CTRL_WRAP;
@@ -757,7 +757,7 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
 	/* set transmit request threshold register */
 	out32 (EMAC_TRTR + hw_p->hw_addr, 0x18000000);	/* 256 byte threshold */
 
-	/* set receive  low/high water mark register */
+	/* set receive	low/high water mark register */
 #if defined(CONFIG_440)
 	/* 440GP has a 64 byte burst length */
 	out32 (EMAC_RX_HI_LO_WMARK + hw_p->hw_addr, 0x80009000);
@@ -1012,7 +1012,7 @@ int enetInt (struct eth_device *dev)
 		/* check for EOB on valid channels	      */
 		if (my_uic0msr & UIC_MRE) {
 			mal_rx_eob = mfdcr (malrxeobisr);
-			if ((mal_rx_eob & (0x80000000 >> hw_p->devnum)) != 0) {	/* call emac routine for channel x */
+			if ((mal_rx_eob & (0x80000000 >> hw_p->devnum)) != 0) { /* call emac routine for channel x */
 				/* clear EOB
 				   mtdcr(malrxeobisr, mal_rx_eob); */
 				enet_rcv (dev, emac_isr);
@@ -1118,7 +1118,7 @@ int enetInt (struct eth_device *dev)
 		if (my_uicmsr & UIC_MAL_RXEOB)
 		{
 			mal_rx_eob = mfdcr (malrxeobisr);
-			if ((mal_rx_eob & (0x80000000 >> hw_p->devnum)) != 0) {	/* call emac routine for channel x */
+			if ((mal_rx_eob & (0x80000000 >> hw_p->devnum)) != 0) { /* call emac routine for channel x */
 				/* clear EOB
 				 mtdcr(malrxeobisr, mal_rx_eob); */
 				enet_rcv (dev, emac_isr);
@@ -1152,7 +1152,7 @@ static void mal_err (struct eth_device *dev, unsigned long isr,
 	mtdcr (malrxdeir, 0x80000000);
 
 #ifdef INFO_4XX_ENET
-	printf ("\nMAL error occured.... ISR = %lx UIC = = %lx  MAL_DEF = %lx  MAL_ERR= %lx \n", isr, uic, maldef, mal_errr);
+	printf ("\nMAL error occured.... ISR = %lx UIC = = %lx	MAL_DEF = %lx  MAL_ERR= %lx \n", isr, uic, maldef, mal_errr);
 #endif
 
 	eth_init (hw_p->bis);	/* start again... */
@@ -1266,7 +1266,7 @@ static int ppc_4xx_eth_rx (struct eth_device *dev)
 	unsigned long msr;
 	EMAC_4XX_HW_PST hw_p = dev->priv;
 
-	hw_p->is_receiving = 1;	/* tell driver */
+	hw_p->is_receiving = 1; /* tell driver */
 
 	for (;;) {
 		/* AS.HARNOIS
@@ -1285,8 +1285,8 @@ static int ppc_4xx_eth_rx (struct eth_device *dev)
 		length = hw_p->rx[user_index].data_len;
 
 		/* Pass the packet up to the protocol layers. */
-		/*       NetReceive(NetRxPackets[rxIdx], length - 4); */
-		/*       NetReceive(NetRxPackets[i], length); */
+		/*	 NetReceive(NetRxPackets[rxIdx], length - 4); */
+		/*	 NetReceive(NetRxPackets[i], length); */
 		NetReceive (NetRxPackets[user_index], length - 4);
 		/* Free Recv Buffer */
 		hw_p->rx[user_index].ctrl |= MAL_RX_CTRL_EMPTY;
@@ -1303,7 +1303,7 @@ static int ppc_4xx_eth_rx (struct eth_device *dev)
 		mtmsr (msr);	/* Enable IRQ's */
 	}
 
-	hw_p->is_receiving = 0;	/* tell driver */
+	hw_p->is_receiving = 0; /* tell driver */
 
 	return length;
 }
diff --git a/include/configs/pb1x00.h b/include/configs/pb1x00.h
new file mode 100644
index 0000000..f7de99b
--- /dev/null
+++ b/include/configs/pb1x00.h
@@ -0,0 +1,189 @@
+/*
+ * (C) Copyright 2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * This file contains the configuration parameters for the dbau1x00 board.
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define CONFIG_MIPS32		1  /* MIPS32 CPU core	*/
+#define CONFIG_PB1X00		1
+#define CONFIG_AU1X00		1  /* alchemy series cpu */
+
+#ifdef CONFIG_PB1000
+#define CONFIG_AU1000		1
+#else
+#ifdef CONFIG_PB1100
+#define CONFIG_AU1100		1
+#else
+#ifdef CONFIG_PB1500
+#define CONFIG_AU1500		1
+#else
+#error "No valid board set"
+#endif
+#endif
+#endif
+
+#define CONFIG_ETHADDR		DE:AD:BE:EF:01:01    /* Ethernet address */
+
+#define CONFIG_BOOTDELAY	2	/* autoboot after 2 seconds	*/
+
+#define CONFIG_BAUDRATE		115200
+
+/* valid baudrates */
+#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+
+#define	CONFIG_TIMESTAMP		/* Print image info with timestamp */
+#undef	CONFIG_BOOTARGS
+
+#define	CONFIG_EXTRA_ENV_SETTINGS					\
+	"addmisc=setenv bootargs $(bootargs) "				\
+		"console=ttyS0,$(baudrate) "				\
+		"panic=1\0"						\
+	"bootfile=/vmlinux.img\0"				\
+	"load=tftp 80500000 $(u-boot)\0"				\
+	""
+/* Boot from NFS root */
+#define CONFIG_BOOTCOMMAND	"bootp; setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):$(rootpath) ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off; bootm"
+
+/*
+ * Miscellaneous configurable options
+ */
+#define	CFG_LONGHELP				/* undef to save memory      */
+#define	CFG_PROMPT		"Pb1x00 # "	/* Monitor Command Prompt    */
+#define	CFG_CBSIZE		256		/* Console I/O Buffer Size   */
+#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)  /* Print Buffer Size */
+#define	CFG_MAXARGS		16		/* max number of command args*/
+
+#define CFG_MALLOC_LEN		128*1024
+
+#define CFG_BOOTPARAMS_LEN	128*1024
+
+#define CFG_HZ			396000000      /* FIXME causes overflow in net.c */
+
+#define CFG_SDRAM_BASE		0x80000000     /* Cached addr */
+
+#define	CFG_LOAD_ADDR		0x81000000     /* default load address	*/
+
+#define CFG_MEMTEST_START	0x80100000
+#undef CFG_MEMTEST_START
+#define CFG_MEMTEST_START       0x80200000
+#define CFG_MEMTEST_END		0x83800000
+
+/*-----------------------------------------------------------------------
+ * FLASH and environment organization
+ */
+#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks */
+#define CFG_MAX_FLASH_SECT	(128)	/* max number of sectors on one chip */
+
+#define PHYS_FLASH_1		0xbec00000 /* Flash Bank #1 */
+#define PHYS_FLASH_2		0xbfc00000 /* Flash Bank #2 */
+
+/* The following #defines are needed to get flash environment right */
+#define	CFG_MONITOR_BASE	TEXT_BASE
+#define	CFG_MONITOR_LEN		(192 << 10)
+
+#define CFG_INIT_SP_OFFSET	0x4000000
+
+/* We boot from this flash, selected with dip switch */
+#define CFG_FLASH_BASE		PHYS_FLASH_2
+
+/* timeout values are in ticks */
+#define CFG_FLASH_ERASE_TOUT	(2 * CFG_HZ) /* Timeout for Flash Erase */
+#define CFG_FLASH_WRITE_TOUT	(2 * CFG_HZ) /* Timeout for Flash Write */
+
+#define	CFG_ENV_IS_NOWHERE	1
+
+/* Address and size of Primary Environment Sector	*/
+#define CFG_ENV_ADDR		0xB0030000
+#define CFG_ENV_SIZE		0x10000
+
+#define CONFIG_FLASH_16BIT
+
+#define CONFIG_NR_DRAM_BANKS	2
+
+#define CONFIG_NET_MULTI
+
+#define CONFIG_MEMSIZE_IN_BYTES
+
+
+/*---USB -------------------------------------------*/
+#if 0
+#define CONFIG_USB_OHCI
+#define ADD_USB_CMD             CFG_CMD_USB | CFG_CMD_FAT
+#define CONFIG_USB_STORAGE
+#define CONFIG_DOS_PARTITION
+#else
+#define ADD_USB_CMD             0
+#endif
+
+/*---ATA PCMCIA ------------------------------------*/
+#if 0
+#define CFG_PCMCIA_MEM_SIZE 0x4000000 /* Offset to slot 1 FIXME!!! */
+#define CFG_PCMCIA_MEM_ADDR 0x20000000
+#define CONFIG_PCMCIA_SLOT_A
+
+#define CONFIG_ATAPI 1
+#define CONFIG_MAC_PARTITION 1
+
+/* We run CF in "true ide" mode or a harddrive via pcmcia */
+#define CONFIG_IDE_PCMCIA 1
+
+/* We only support one slot for now */
+#define CFG_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
+#define CFG_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
+
+#undef	CONFIG_IDE_LED			/* LED   for ide not supported	*/
+#undef	CONFIG_IDE_RESET		/* reset for ide not supported	*/
+
+#define CFG_ATA_IDE0_OFFSET	0x0000
+
+#define CFG_ATA_BASE_ADDR       CFG_PCMCIA_MEM_ADDR
+
+/* Offset for data I/O			*/
+#define CFG_ATA_DATA_OFFSET     8
+
+/* Offset for normal register accesses  */
+#define CFG_ATA_REG_OFFSET      0
+
+/* Offset for alternate registers       */
+#define CFG_ATA_ALT_OFFSET      0x0100
+
+#endif
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_DCACHE_SIZE		16384
+#define CFG_ICACHE_SIZE		16384
+#define CFG_CACHELINE_SIZE	32
+
+#define CONFIG_COMMANDS	\
+  (((CONFIG_CMD_DFL | CFG_CMD_DHCP | CFG_CMD_ELF | CFG_CMD_MII | CFG_CMD_PING) & \
+ ~(CFG_CMD_ENV | CFG_CMD_FAT | CFG_CMD_FLASH | CFG_CMD_FPGA | CFG_CMD_IDE | \
+   CFG_CMD_LOADS | CFG_CMD_RUN | CFG_CMD_LOADB | CFG_CMD_ELF | \
+   CFG_CMD_BDI | CFG_CMD_BEDBUG)) | ADD_USB_CMD)
+#include <cmd_confdefs.h>
+
+#endif	/* __CONFIG_H */