* Make Ethernet autonegotiation on INCA-IP work for all clock rates;

  allow selection of clock frequency as "make" target

* Implement memory autosizing code for IceCube boards

* Configure network port on INCA-IP for autonegotiation

* Fix overflow problem in network timeout code

* Patch by Richard Woodruff, 8 Aug 2003:
  Allow crc32 to be used at address 0x000 (crc32_no_comp, too).

17 files changed, 301 insertions, 219 deletions

diff --git a/CHANGELOG b/CHANGELOG
index a4c8782..f50831e 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,18 @@
 Changes for U-Boot 0.4.5:
 ======================================================================
 
+* Make Ethernet autonegotiation on INCA-IP work for all clock rates;
+  allow selection of clock frequency as "make" target
+
+* Implement memory autosizing code for IceCube boards
+
+* Configure network port on INCA-IP for autonegotiation
+
+* Fix overflow problem in network timeout code
+
+* Patch by Richard Woodruff, 8 Aug 2003:
+  Allow crc32 to be used at address 0x000 (crc32_no_comp, too).
+
 * Update for TQM board defaults:
   disable clocks_in_mhz, enable boot count limit
 
diff --git a/Makefile b/Makefile
index f46103f..ad0de2c7 100644
--- a/Makefile
+++ b/Makefile
@@ -848,8 +848,30 @@ sc520_spunk_rel_config	:	unconfig
 ## MIPS32 4Kc
 #########################################################################
 
-incaip_config :		unconfig
-	@./mkconfig $(@:_config=) mips mips incaip
+xtract_incaip = $(subst _100MHz,,$(subst _133MHz,,$(subst _150MHz,,$(subst _config,,$1))))
+
+incaip_100MHz_config	\
+incaip_133MHz_config	\
+incaip_150MHz_config	\
+incaip_config: unconfig
+	@ >include/config.h
+	@[ -z "$(findstring _100MHz,$@)" ] || \
+		{ echo "#define CPU_CLOCK_RATE 100000000" >>include/config.h ; \
+		  echo "... with 100MHz system clock" ; \
+		}
+	@[ -z "$(findstring _133MHz,$@)" ] || \
+		{ echo "#define CPU_CLOCK_RATE 133000000" >>include/config.h ; \
+		  echo "... with 133MHz system clock" ; \
+		}
+	@[ -z "$(findstring _150MHz,$@)" ] || \
+		{ echo "#define CPU_CLOCK_RATE 150000000" >>include/config.h ; \
+		  echo "... with 150MHz system clock" ; \
+		}
+	@./mkconfig -a $(call xtract_incaip,$@) mips mips incaip
+
+#########################################################################
+## MIPS64 5Kc
+#########################################################################
 
 purple_config :		unconfig
 	@./mkconfig $(@:_config=) mips mips purple
diff --git a/board/icecube/icecube.c b/board/icecube/icecube.c
index 45c871e..396ad2a 100644
--- a/board/icecube/icecube.c
+++ b/board/icecube/icecube.c
@@ -25,35 +25,84 @@
 #include <mpc5xxx.h>
 #include <pci.h>
 
-long int initdram (int board_type)
+static long int dram_size(long int *base, long int maxsize)
 {
-#ifndef CFG_RAMBOOT
-	/* configure SDRAM start/end */
-#if defined(CONFIG_MPC5200)
-	*(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x00000018;/* 32M at 0x0 */
-	*(vu_long *)MPC5XXX_SDRAM_CS1CFG = 0x02000000;/* disabled */
+	volatile long int *addr;
+	ulong cnt, val;
+	ulong save[32];			/* to make test non-destructive */
+	unsigned char i = 0;
 
-	/* setup config registers */
-	*(vu_long *)MPC5XXX_SDRAM_CONFIG1 = 0xc2233a00;
-	*(vu_long *)MPC5XXX_SDRAM_CONFIG2 = 0x88b70004;
+	for (cnt = (maxsize / sizeof (long)) >> 1; cnt > 0; cnt >>= 1) {
+		addr = base + cnt;		/* pointer arith! */
+
+		save[i++] = *addr;
+		*addr = ~cnt;
+	}
+
+	/* write 0 to base address */
+	addr = base;
+	save[i] = *addr;
+	*addr = 0;
+
+	/* check at base address */
+	if ((val = *addr) != 0) {
+		*addr = save[i];
+		return (0);
+	}
+
+	for (cnt = 1; cnt < maxsize / sizeof (long); cnt <<= 1) {
+		addr = base + cnt;		/* pointer arith! */
+
+		val = *addr;
+		*addr = save[--i];
+
+		if (val != (~cnt)) {
+			return (cnt * sizeof (long));
+		}
+	}
+	return (maxsize);
+}
+
+static void sdram_start (int hi_addr)
+{
+	long hi_addr_bit = hi_addr ? 0x01000000 : 0;
 
 	/* unlock mode register */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = 0xd04f0000;
+	*(vu_long *)MPC5XXX_SDRAM_CTRL = 0xd04f0000 | hi_addr_bit;
 	/* precharge all banks */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = 0xd04f0002;
+	*(vu_long *)MPC5XXX_SDRAM_CTRL = 0xd04f0002 | hi_addr_bit;
 	/* set mode register */
+#if defined(CONFIG_MPC5200)
 	*(vu_long *)MPC5XXX_SDRAM_MODE = 0x408d0000;
+#elif defined(CONFIG_MGT5100)
+	*(vu_long *)MPC5XXX_SDRAM_MODE = 0x008d0000;
+#endif
 	/* precharge all banks */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = 0xd04f0002;
+	*(vu_long *)MPC5XXX_SDRAM_CTRL = 0xd04f0002 | hi_addr_bit;
 	/* auto refresh */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = 0xd04f0004;
+	*(vu_long *)MPC5XXX_SDRAM_CTRL = 0xd04f0004 | hi_addr_bit;
 	/* set mode register */
 	*(vu_long *)MPC5XXX_SDRAM_MODE = 0x008d0000;
 	/* normal operation */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = 0x504f0000;
+	*(vu_long *)MPC5XXX_SDRAM_CTRL = 0x504f0000 | hi_addr_bit;
+}
+
+long int initdram (int board_type)
+{
+	ulong test1, test2, dramsize = 0;
+#ifndef CFG_RAMBOOT
+	/* configure SDRAM start/end */
+#if defined(CONFIG_MPC5200)
+	*(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x0000001e;/* 2G at 0x0 */
+	*(vu_long *)MPC5XXX_SDRAM_CS1CFG = 0x80000000;/* disabled */
+
+	/* setup config registers */
+	*(vu_long *)MPC5XXX_SDRAM_CONFIG1 = 0xc2233a00;
+	*(vu_long *)MPC5XXX_SDRAM_CONFIG2 = 0x88b70004;
+
 #elif defined(CONFIG_MGT5100)
 	*(vu_long *)MPC5XXX_SDRAM_START = 0x00000000;
-	*(vu_long *)MPC5XXX_SDRAM_STOP = 0x000007ff;/* 64M */
+	*(vu_long *)MPC5XXX_SDRAM_STOP = 0x0000ffff;/* 2G */
 	*(vu_long *)MPC5XXX_ADDECR |= (1 << 22); /* Enable SDRAM */
 
 	/* setup config registers */
@@ -62,33 +111,32 @@ long int initdram (int board_type)
 
 	/* address select register */
 	*(vu_long *)MPC5XXX_SDRAM_XLBSEL = 0x03000000;
-
-	/* unlock mode register */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = 0xd14f0000;
-	/* precharge all banks */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = 0xd14f0002;
-	/* set mode register */
-	*(vu_long *)MPC5XXX_SDRAM_MODE = 0x008d0000;
-	/* precharge all banks */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = 0xd14f0002;
-	/* auto refresh */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = 0xd14f0004;
-	/* set mode register */
-	*(vu_long *)MPC5XXX_SDRAM_MODE = 0x008d0000;
-	/* normal operation */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = 0x514f0000;
 #endif
+	sdram_start(0);
+	test1 = dram_size((ulong *)CFG_SDRAM_BASE, 0x80000000);
+	sdram_start(1);
+	test2 = dram_size((ulong *)CFG_SDRAM_BASE, 0x80000000);
+	if (test1 > test2) {
+		sdram_start(0);
+		dramsize = test1;
+	} else {
+		dramsize = test2;
+	}
+#if defined(CONFIG_MPC5200)
+	*(vu_long *)MPC5XXX_SDRAM_CS0CFG =
+		(0x13 + __builtin_ffs(dramsize >> 20) - 1);
+	*(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize; /* disabled */
+#elif defined(CONFIG_MGT5100)
+	*(vu_long *)MPC5XXX_SDRAM_STOP = ((dramsize - 1) >> 15);
+#endif
+
 #else
 #ifdef CONFIG_MGT5100
 	*(vu_long *)MPC5XXX_ADDECR |= (1 << 22); /* Enable SDRAM */
 #endif
 #endif
 	/* return total ram size */
-#if defined(CONFIG_MGT5100)
-	return (64 * 1024 * 1024);
-#elif defined(CONFIG_MPC5200)
-	return (32 * 1024 * 1024);
-#endif
+	return dramsize;
 }
 
 int checkboard (void)
diff --git a/board/tqm8xx/flash.c b/board/tqm8xx/flash.c
index d949c2e..a974e23 100644
--- a/board/tqm8xx/flash.c
+++ b/board/tqm8xx/flash.c
@@ -116,14 +116,15 @@ unsigned long flash_init (void)
 
 #ifdef	CFG_ENV_IS_IN_FLASH
 	/* ENV protection ON by default */
-	debug ("Protect %senvironment: %08lx ... %08lx\n",
 # ifdef CFG_ENV_ADDR_REDUND
-		"primary   ",
+	debug ("Protect primary   environment: %08lx ... %08lx\n",
+		(ulong)CFG_ENV_ADDR,
+		(ulong)CFG_ENV_ADDR + CFG_ENV_SECT_SIZE - 1);
 # else
-		"",
-# endif
+	debug ("Protect environment: %08lx ... %08lx\n",
 		(ulong)CFG_ENV_ADDR,
 		(ulong)CFG_ENV_ADDR + CFG_ENV_SECT_SIZE - 1);
+# endif
 
 	flash_protect(FLAG_PROTECT_SET,
 		      CFG_ENV_ADDR,
diff --git a/cpu/mpc5xxx/pci_mpc5200.c b/cpu/mpc5xxx/pci_mpc5200.c
index 106e843..a890a6d 100644
--- a/cpu/mpc5xxx/pci_mpc5200.c
+++ b/cpu/mpc5xxx/pci_mpc5200.c
@@ -51,9 +51,6 @@ static int mpc5200_read_config_dword(struct pci_controller *hose,
 	*value = in_le32((volatile u32 *)CONFIG_PCI_IO_PHYS);
 	eieio();
 	*(volatile u32 *)MPC5XXX_PCI_CAR = 0;
-	/* skip MPC5200 */
-	if (offset == 0 && *value == 0x58031057)
-		*value = 0xffffffff;
 	return 0;
 }
 
diff --git a/cpu/mpc5xxx/start.S b/cpu/mpc5xxx/start.S
index 37448ac..216c1c8 100644
--- a/cpu/mpc5xxx/start.S
+++ b/cpu/mpc5xxx/start.S
@@ -103,7 +103,7 @@ boot_cold:
 boot_warm:
 	mfmsr	r5			/* save msr contents		*/
 
-#if defined(CFG_DEFAULT_MBAR)
+#if defined(CFG_DEFAULT_MBAR) && !defined(CFG_RAMBOOT)
 	lis	r3, CFG_MBAR@h
 	ori	r3, r3, CFG_MBAR@l
 #if defined(CONFIG_MPC5200)
diff --git a/doc/README.INCA-IP b/doc/README.INCA-IP
index 517eec0..7421b6e 100644
--- a/doc/README.INCA-IP
+++ b/doc/README.INCA-IP
@@ -41,4 +41,18 @@ to install a U-Boot image into flash.
 	go 0xb0000000
 
 
+
+Ethernet autonegotiation needs some time to complete. Instead of
+delaying the boot process in all cases, we just start the
+autonegotiation process when U-Boot comes up and that is all. Most
+likely, it will complete by the time the network transfer is
+attempted for the first time. In the worst case, if a transfer is
+attempted before the autonegotiation is complete, just a single
+packet would be lost resulting in a single timeout error, and then
+the transfer would proceed normally. So the time that we would have
+lost unconditionally waiting for the autonegotiation to complete, we
+have to wait only if the file transfer is started immediately after
+reset. We've verified that this works for all the clock
+configurations.
+
 (C) 2003 Wolfgang Denk
diff --git a/drivers/inca-ip_sw.c b/drivers/inca-ip_sw.c
index 07e86fc..f5009d4 100644
--- a/drivers/inca-ip_sw.c
+++ b/drivers/inca-ip_sw.c
@@ -70,10 +70,8 @@
 
 typedef struct
 {
-	union
-	{
-		struct
-		{
+	union {
+		struct {
 			volatile u32 HOLD                :1;
 			volatile u32 ICpt                :1;
 			volatile u32 IEop                :1;
@@ -89,10 +87,8 @@ typedef struct
 
 	volatile u32 RxDataPtr;
 
-	union
-	{
-		struct
-		{
+	union {
+		struct {
 			volatile u32 C                   :1;
 			volatile u32 Sop                 :1;
 			volatile u32 Eop                 :1;
@@ -108,10 +104,8 @@ typedef struct
 
 typedef struct
 {
-	union
-	{
-		struct
-		{
+	union {
+		struct {
 			volatile u32 HOLD                :1;
 			volatile u32 Eop                 :1;
 			volatile u32 Sop                 :1;
@@ -159,8 +153,7 @@ int inca_switch_initialize(bd_t * bis)
 	printf("Entered inca_switch_initialize()\n");
 #endif
 
-	if (!(dev = (struct eth_device *) malloc (sizeof *dev)))
-	{
+	if (!(dev = (struct eth_device *) malloc (sizeof *dev))) {
 		printf("Failed to allocate memory\n");
 		return 0;
 	}
@@ -196,8 +189,8 @@ static int inca_switch_init(struct eth_device *dev, bd_t * bis)
 	printf("Entering inca_switch_init()\n");
 #endif
 
-		/* Set MAC address.
-		 */
+	/* Set MAC address.
+	 */
 	wTmp = (u16)dev->enetaddr[0];
 	regValue = (wTmp << 8) | dev->enetaddr[1];
 
@@ -211,35 +204,32 @@ static int inca_switch_init(struct eth_device *dev, bd_t * bis)
 
 	SW_WRITE_REG(INCA_IP_Switch_PMAC_SA2, regValue);
 
-		/* Initialize the descriptor rings.
-		 */
+	/* Initialize the descriptor rings.
+	 */
 	for (i = 0; i < NUM_RX_DESC; i++)
 	{
 		inca_rx_descriptor_t * rx_desc = KSEG1ADDR(&rx_ring[i]);
 		memset(rx_desc, 0, sizeof(rx_ring[i]));
 
-			/* Set maximum size of receive buffer.
-			 */
+		/* Set maximum size of receive buffer.
+		 */
 		rx_desc->params.field.NFB = PKTSIZE_ALIGN;
 
-			/* Set the offset of the receive buffer. Zero means
-			 * that the offset mechanism is not used.
-			 */
+		/* Set the offset of the receive buffer. Zero means
+		 * that the offset mechanism is not used.
+		 */
 		rx_desc->params.field.offset = 0;
 
 		/* Check if it is the last descriptor.
 		 */
-		if (i == (NUM_RX_DESC - 1))
-		{
-				/* Let the last descriptor point to the first
-				 * one.
-				 */
+		if (i == (NUM_RX_DESC - 1)) {
+			/* Let the last descriptor point to the first
+			 * one.
+			 */
 			rx_desc->nextRxDescPtr = KSEG1ADDR((u32)rx_ring);
-		}
-		else
-		{
-				/* Set the address of the next descriptor.
-				 */
+		} else {
+			/* Set the address of the next descriptor.
+			 */
 			rx_desc->nextRxDescPtr = (u32)KSEG1ADDR(&rx_ring[i+1]);
 		}
 
@@ -251,8 +241,7 @@ static int inca_switch_init(struct eth_device *dev, bd_t * bis)
 	printf("tx_ring = 0x%08X 0x%08X\n", (u32)tx_ring, (u32)&tx_ring[0]);
 #endif
 
-	for (i = 0; i < NUM_TX_DESC; i++)
-	{
+	for (i = 0; i < NUM_TX_DESC; i++) {
 		inca_tx_descriptor_t * tx_desc = KSEG1ADDR(&tx_ring[i]);
 
 		memset(tx_desc, 0, sizeof(tx_ring[i]));
@@ -263,46 +252,43 @@ static int inca_switch_init(struct eth_device *dev, bd_t * bis)
 
 			/* Check if it is the last descriptor.
 			 */
-		if (i == (NUM_TX_DESC - 1))
-		{
+		if (i == (NUM_TX_DESC - 1)) {
 				/* Let the last descriptor point to the
 				 * first one.
 				 */
 			tx_desc->nextTxDescPtr = KSEG1ADDR((u32)tx_ring);
-		}
-		else
-		{
+		} else {
 				/* Set the address of the next descriptor.
 				 */
 			tx_desc->nextTxDescPtr = (u32)KSEG1ADDR(&tx_ring[i+1]);
 		}
 	}
 
-		/* Initialize RxDMA.
-		 */
+	/* Initialize RxDMA.
+	 */
 	DMA_READ_REG(INCA_IP_DMA_DMA_RXISR, v);
 #if 0
 	printf("RX status = 0x%08X\n", v);
 #endif
 
-		/* Writing to the FRDA of CHANNEL.
-		 */
+	/* Writing to the FRDA of CHANNEL.
+	 */
 	DMA_WRITE_REG(INCA_IP_DMA_DMA_RXFRDA0, (u32)rx_ring);
 
-		/* Writing to the COMMAND REG.
-		 */
+	/* Writing to the COMMAND REG.
+	 */
 	DMA_WRITE_REG(INCA_IP_DMA_DMA_RXCCR0,
 		      INCA_IP_DMA_DMA_RXCCR0_INIT);
 
-		/* Initialize TxDMA.
-		 */
+	/* Initialize TxDMA.
+	 */
 	DMA_READ_REG(INCA_IP_DMA_DMA_TXISR, v);
 #if 0
 	printf("TX status = 0x%08X\n", v);
 #endif
 
-		/* Writing to the FRDA of CHANNEL.
-		 */
+	/* Writing to the FRDA of CHANNEL.
+	 */
 	DMA_WRITE_REG(INCA_IP_DMA_DMA_TXFRDA0, (u32)tx_ring);
 
 	tx_new = rx_new = 0;
@@ -313,12 +299,12 @@ static int inca_switch_init(struct eth_device *dev, bd_t * bis)
 #if 0
 	rx_ring[rx_hold].params.field.HOLD = 1;
 #endif
-	   /* enable spanning tree forwarding, enable the CPU port */
-	   /* ST_PT:
-		 CPS (CPU port status)   0x3 (forwarding)
-		 LPS (LAN port status)   0x3 (forwarding)
-		 PPS (PC port status)    0x3 (forwarding)
-	   */
+	/* enable spanning tree forwarding, enable the CPU port */
+	/* ST_PT:
+	 *	CPS (CPU port status)   0x3 (forwarding)
+	 *	LPS (LAN port status)   0x3 (forwarding)
+	 *	PPS (PC port status)    0x3 (forwarding)
+	 */
 	SW_WRITE_REG(INCA_IP_Switch_ST_PT,0x3f);
 
 #if 0
@@ -342,23 +328,19 @@ static int inca_switch_send(struct eth_device *dev, volatile void *packet,
 	printf("Entered inca_switch_send()\n");
 #endif
 
-	if (length <= 0)
-	{
+	if (length <= 0) {
 		printf ("%s: bad packet size: %d\n", dev->name, length);
 		goto Done;
 	}
 
-	for(i = 0; tx_desc->C == 0; i++)
-	{
-		if (i >= TOUT_LOOP)
-		{
+	for(i = 0; tx_desc->C == 0; i++) {
+		if (i >= TOUT_LOOP) {
 			printf("%s: tx error buffer not ready\n", dev->name);
 			goto Done;
 		}
 	}
 
-	if (tx_old_hold >= 0)
-	{
+	if (tx_old_hold >= 0) {
 		KSEG1ADDR(&tx_ring[tx_old_hold])->params.field.HOLD = 1;
 	}
 	tx_old_hold = tx_hold;
@@ -376,13 +358,10 @@ static int inca_switch_send(struct eth_device *dev, volatile void *packet,
 	tx_new  = (tx_new + 1) % NUM_TX_DESC;
 
 
-	if (! initialized)
-	{
+	if (! initialized) {
 		command = INCA_IP_DMA_DMA_TXCCR0_INIT;
 		initialized = 1;
-	}
-	else
-	{
+	} else {
 		command = INCA_IP_DMA_DMA_TXCCR0_HR;
 	}
 
@@ -394,10 +373,8 @@ static int inca_switch_send(struct eth_device *dev, volatile void *packet,
 	DMA_WRITE_REG(INCA_IP_DMA_DMA_TXCCR0, regValue);
 
 #if 1
-	for(i = 0; KSEG1ADDR(&tx_ring[tx_hold])->C == 0; i++)
-	{
-		if (i >= TOUT_LOOP)
-		{
+	for(i = 0; KSEG1ADDR(&tx_ring[tx_hold])->C == 0; i++) {
+		if (i >= TOUT_LOOP) {
 			printf("%s: tx buffer not ready\n", dev->name);
 			goto Done;
 		}
@@ -421,12 +398,10 @@ static int inca_switch_recv(struct eth_device *dev)
 	printf("Entered inca_switch_recv()\n");
 #endif
 
-	for (;;)
-	{
+	for (;;) {
 		rx_desc = KSEG1ADDR(&rx_ring[rx_new]);
 
-		if (rx_desc->status.field.C == 0)
-		{
+		if (rx_desc->status.field.C == 0) {
 			break;
 		}
 
@@ -434,8 +409,7 @@ static int inca_switch_recv(struct eth_device *dev)
 		rx_ring[rx_new].params.field.HOLD = 1;
 #endif
 
-		if (! rx_desc->status.field.Eop)
-		{
+		if (! rx_desc->status.field.Eop) {
 			printf("Partly received packet!!!\n");
 			break;
 		}
@@ -454,16 +428,13 @@ static int inca_switch_recv(struct eth_device *dev)
 }
 #endif
 
-		if (length)
-		{
+		if (length) {
 #if 0
 			printf("Received %d bytes\n", length);
 #endif
 			NetReceive((void*)KSEG1ADDR(NetRxPackets[rx_new]),
 				    length - 4);
-		}
-		else
-		{
+		} else {
 #if 1
 			printf("Zero length!!!\n");
 #endif
@@ -495,16 +466,16 @@ static void inca_switch_halt(struct eth_device *dev)
 	initialized = 0;
 #endif
 #if 1
-		/* Disable forwarding to the CPU port.
-		 */
+	/* Disable forwarding to the CPU port.
+	 */
 	SW_WRITE_REG(INCA_IP_Switch_ST_PT,0xf);
 
-		/* Close RxDMA channel.
-		 */
+	/* Close RxDMA channel.
+	 */
 	DMA_WRITE_REG(INCA_IP_DMA_DMA_RXCCR0, INCA_IP_DMA_DMA_RXCCR0_OFF);
 
-		/* Close TxDMA channel.
-		 */
+	/* Close TxDMA channel.
+	 */
 	DMA_WRITE_REG(INCA_IP_DMA_DMA_TXCCR0, INCA_IP_DMA_DMA_TXCCR0_OFF);
 
 
@@ -519,88 +490,89 @@ static void inca_init_switch_chip(void)
 {
 	u32 regValue;
 
-		/* To workaround a problem with collision counter
-		 * (see Errata sheet).
-		 */
+	/* To workaround a problem with collision counter
+	 * (see Errata sheet).
+	 */
 	SW_WRITE_REG(INCA_IP_Switch_PC_TX_CTL, 0x00000001);
 	SW_WRITE_REG(INCA_IP_Switch_LAN_TX_CTL, 0x00000001);
 
 #if 1
-	   /* init MDIO configuration:
-		 MDS (Poll speed):       0x01 (4ms)
-		 PHY_LAN_ADDR:           0x06
-		 PHY_PC_ADDR:            0x05
-		 UEP (Use External PHY): 0x00 (Internal PHY is used)
-		 PS (Port Select):       0x00 (PT/UMM for LAN)
-		 PT (PHY Test):          0x00 (no test mode)
-		 UMM (Use MDIO Mode):    0x00 (state machine is disabled)
-	   */
+	/* init MDIO configuration:
+	 *	MDS (Poll speed):       0x01 (4ms)
+	 *	PHY_LAN_ADDR:           0x06
+	 *	PHY_PC_ADDR:            0x05
+	 *	UEP (Use External PHY): 0x00 (Internal PHY is used)
+	 *	PS (Port Select):       0x00 (PT/UMM for LAN)
+	 *	PT (PHY Test):          0x00 (no test mode)
+	 *	UMM (Use MDIO Mode):    0x00 (state machine is disabled)
+	 */
 	SW_WRITE_REG(INCA_IP_Switch_MDIO_CFG, 0x4c50);
 
-	   /* init PHY:
-		 SL (Auto Neg. Speed for LAN)
-		 SP (Auto Neg. Speed for PC)
-		 LL (Link Status for LAN)
-		 LP (Link Status for PC)
-		 DL (Duplex Status for LAN)
-		 DP (Duplex Status for PC)
-		 PL (Auto Neg. Pause Status for LAN)
-		 PP (Auto Neg. Pause Status for PC)
-	   */
+	/* init PHY:
+	 *	SL (Auto Neg. Speed for LAN)
+	 *	SP (Auto Neg. Speed for PC)
+	 *	LL (Link Status for LAN)
+	 *	LP (Link Status for PC)
+	 *	DL (Duplex Status for LAN)
+	 *	DP (Duplex Status for PC)
+	 *	PL (Auto Neg. Pause Status for LAN)
+	 *	PP (Auto Neg. Pause Status for PC)
+	 */
 	SW_WRITE_REG (INCA_IP_Switch_EPHY, 0xff);
 
-	   /* MDIO_ACC:
-		 RA (Request/Ack)  0x01 (Request)
-		 RW (Read/Write)   0x01 (Write)
-		 PHY_ADDR          0x05 (PC)
-		 REG_ADDR          0x00 (PHY_BCR: basic control register)
-		 PHY_DATA          0x8000
-				      Reset                   - software reset
-				      LB (loop back)          - normal
-				      SS (speed select)       - 10 Mbit/s
-				      ANE (auto neg. enable)  - disable
-				      PD (power down)         - normal
-				      ISO (isolate)           - normal
-				      RAN (restart auto neg.) - normal
-				      DM (duplex mode)        - half duplex
-				      CT (collision test)     - enable
-	   */
-	SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC, 0xc0a08000);
-
-	   /* MDIO_ACC:
-		 RA (Request/Ack)  0x01 (Request)
-		 RW (Read/Write)   0x01 (Write)
-		 PHY_ADDR          0x06 (LAN)
-		 REG_ADDR          0x00 (PHY_BCR: basic control register)
-		 PHY_DATA          0x8000
-				      Reset                   - software reset
-				      LB (loop back)          - normal
-				      SS (speed select)       - 10 Mbit/s
-				      ANE (auto neg. enable)  - disable
-				      PD (power down)         - normal
-				      ISO (isolate)           - normal
-				      RAN (restart auto neg.) - normal
-				      DM (duplex mode)        - half duplex
-				      CT (collision test)     - enable
-	   */
-	SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC, 0xc0c08000);
+	/* MDIO_ACC:
+	 *	RA (Request/Ack)  0x01 (Request)
+	 *	RW (Read/Write)   0x01 (Write)
+	 *	PHY_ADDR          0x05 (PC)
+	 *	REG_ADDR          0x00 (PHY_BCR: basic control register)
+	 *	PHY_DATA          0x8000
+	 *		      Reset                   - software reset
+	 *		      LB (loop back)          - normal
+	 *		      SS (speed select)       - 10 Mbit/s
+	 *		      ANE (auto neg. enable)  - enable
+	 *		      PD (power down)         - normal
+	 *		      ISO (isolate)           - normal
+	 *		      RAN (restart auto neg.) - normal
+	 *		      DM (duplex mode)        - half duplex
+	 *		      CT (collision test)     - enable
+	 */
+	SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC, 0xc0a09000);
+
+	/* MDIO_ACC:
+	 *	RA (Request/Ack)  0x01 (Request)
+	 *	RW (Read/Write)   0x01 (Write)
+	 *	PHY_ADDR          0x06 (LAN)
+	 *	REG_ADDR          0x00 (PHY_BCR: basic control register)
+	 *	PHY_DATA          0x8000
+	 *		      Reset                   - software reset
+	 *		      LB (loop back)          - normal
+	 *		      SS (speed select)       - 10 Mbit/s
+	 *		      ANE (auto neg. enable)  - enable
+	 *		      PD (power down)         - normal
+	 *		      ISO (isolate)           - normal
+	 *		      RAN (restart auto neg.) - normal
+	 *		      DM (duplex mode)        - half duplex
+	 *		      CT (collision test)     - enable
+	 */
+   	SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC, 0xc0c09000);
+
 #endif
 
-		/* Make sure the CPU port is disabled for now. We
-		 * don't want packets to get stacked for us until
-		 * we enable DMA and are prepared to receive them.
-		 */
+	/* Make sure the CPU port is disabled for now. We
+	 * don't want packets to get stacked for us until
+	 * we enable DMA and are prepared to receive them.
+	 */
 	SW_WRITE_REG(INCA_IP_Switch_ST_PT,0xf);
 
 	SW_READ_REG(INCA_IP_Switch_ARL_CTL, regValue);
 
-		/* CRC GEN is enabled.
-		 */
+	/* CRC GEN is enabled.
+	 */
 	regValue |= 0x00000200;
 	SW_WRITE_REG(INCA_IP_Switch_ARL_CTL, regValue);
 
-		/* ADD TAG is disabled.
-		 */
+	/* ADD TAG is disabled.
+	 */
 	SW_READ_REG(INCA_IP_Switch_PMAC_HD_CTL, regValue);
 	regValue &= ~0x00000002;
 	SW_WRITE_REG(INCA_IP_Switch_PMAC_HD_CTL, regValue);
@@ -609,8 +581,8 @@ static void inca_init_switch_chip(void)
 
 static void inca_dma_init(void)
 {
-		/* Switch off all DMA channels.
-		 */
+	/* Switch off all DMA channels.
+	 */
 	DMA_WRITE_REG(INCA_IP_DMA_DMA_RXCCR0, INCA_IP_DMA_DMA_RXCCR0_OFF);
 	DMA_WRITE_REG(INCA_IP_DMA_DMA_RXCCR1, INCA_IP_DMA_DMA_RXCCR1_OFF);
 
@@ -618,20 +590,20 @@ static void inca_dma_init(void)
 	DMA_WRITE_REG(INCA_IP_DMA_DMA_TXCCR1, INCA_IP_DMA_DMA_TXCCR1_OFF);
 	DMA_WRITE_REG(INCA_IP_DMA_DMA_TXCCR2, INCA_IP_DMA_DMA_TXCCR2_OFF);
 
-		/* Setup TX channel polling time.
-		 */
+	/* Setup TX channel polling time.
+	 */
 	DMA_WRITE_REG(INCA_IP_DMA_DMA_TXPOLL, INCA_DMA_TX_POLLING_TIME);
 
-		/* Setup RX channel polling time.
-		 */
+	/* Setup RX channel polling time.
+	 */
 	DMA_WRITE_REG(INCA_IP_DMA_DMA_RXPOLL, INCA_DMA_RX_POLLING_TIME);
 
-		/* ERRATA: write reset value into the DMA RX IMR register.
-		 */
+	/* ERRATA: write reset value into the DMA RX IMR register.
+	 */
 	DMA_WRITE_REG(INCA_IP_DMA_DMA_RXIMR, 0xFFFFFFFF);
 
-		/* Just in case: disable all transmit interrupts also.
-		 */
+	/* Just in case: disable all transmit interrupts also.
+	 */
 	DMA_WRITE_REG(INCA_IP_DMA_DMA_TXIMR, 0xFFFFFFFF);
 
 	DMA_WRITE_REG(INCA_IP_DMA_DMA_TXISR, 0xFFFFFFFF);
diff --git a/drivers/pci_auto.c b/drivers/pci_auto.c
index 8fe72a3..20acc07 100644
--- a/drivers/pci_auto.c
+++ b/drivers/pci_auto.c
@@ -323,6 +323,13 @@ int pciauto_config_device(struct pci_controller *hose, pci_dev_t dev)
 		hose->current_busno++;
 		break;
 
+#ifdef CONFIG_MPC5200
+	case PCI_CLASS_BRIDGE_OTHER:
+		DEBUGF("PCI Autoconfig: Skipping bridge device %d\n",
+		       PCI_DEV(dev));
+		break;
+#endif
+
 	default:
 		pciauto_setup_device(hose, dev, 6, hose->pci_mem, hose->pci_io);
 		break;
diff --git a/include/configs/IceCube.h b/include/configs/IceCube.h
index bf09b01..6a43441 100644
--- a/include/configs/IceCube.h
+++ b/include/configs/IceCube.h
@@ -131,6 +131,9 @@
  */
 #define CFG_MBAR		0xf0000000
 #define CFG_SDRAM_BASE		0x00000000
+#ifdef CONFIG_MPC5200
+#define CFG_DEFAULT_MBAR	0x80000000
+#endif
 
 /* Use SRAM until RAM will be available */
 #define CFG_INIT_RAM_ADDR	MPC5XXX_SRAM
diff --git a/include/configs/incaip.h b/include/configs/incaip.h
index b17d7f3..99e7868 100644
--- a/include/configs/incaip.h
+++ b/include/configs/incaip.h
@@ -31,8 +31,10 @@
 #define CONFIG_MIPS32		1	/* MIPS 4Kc CPU core	*/
 #define CONFIG_INCA_IP		1	/* on a INCA-IP Board	*/
 
+#ifndef	CPU_CLOCK_RATE
 /* allowed values: 100000000, 133000000, and 150000000 */
 #define CPU_CLOCK_RATE	133000000	/* 133 MHz clock for the MIPS core */
+#endif
 
 #if CPU_CLOCK_RATE == 100000000
 #define INFINEON_EBU_BOOTCFG	0x20C4	/* CMULT = 4 for 100 MHz */
diff --git a/include/version.h b/include/version.h
index e3ce8be..5ba8488 100644
--- a/include/version.h
+++ b/include/version.h
@@ -24,6 +24,6 @@
 #ifndef	__VERSION_H__
 #define	__VERSION_H__
 
-#define	U_BOOT_VERSION	"U-Boot 0.4.5"
+#define	U_BOOT_VERSION	"U-Boot 0.4.6"
 
 #endif	/* __VERSION_H__ */
diff --git a/lib_generic/crc32.c b/lib_generic/crc32.c
index ce18fc2..50ca4ffd 100644
--- a/lib_generic/crc32.c
+++ b/lib_generic/crc32.c
@@ -178,7 +178,6 @@ uLong ZEXPORT crc32(crc, buf, len)
  */
 uLong ZEXPORT crc32_no_comp(uLong crc, const Bytef *buf, uInt len)
 {
-    if (buf == Z_NULL) return 0L;
 #ifdef DYNAMIC_CRC_TABLE
     if (crc_table_empty)
       make_crc_table();
diff --git a/lib_mips/time.c b/lib_mips/time.c
index 0cb733c..cd8dc72 100644
--- a/lib_mips/time.c
+++ b/lib_mips/time.c
@@ -75,9 +75,7 @@ void udelay (unsigned long usec)
 	ulong tmo;
 	ulong start = get_timer(0);
 
-	tmo = usec * CFG_HZ / 1000;
-	tmo /= 1000;
-
+	tmo = usec * (CFG_HZ / 1000000);
 	while ((ulong)((mips_count_get() - start)) < tmo)
 		/*NOP*/;
 }
diff --git a/net/net.c b/net/net.c
index ce79341..dafcc56 100644
--- a/net/net.c
+++ b/net/net.c
@@ -125,7 +125,8 @@ volatile uchar *NetRxPackets[PKTBUFSRX]; /* Receive packets			*/
 
 static rxhand_f *packetHandler;		/* Current RX packet handler		*/
 static thand_f *timeHandler;		/* Current timeout handler		*/
-static ulong	timeValue;		/* Current timeout value		*/
+static ulong	timeStart;		/* Time base value			*/
+static ulong	timeDelta;		/* Current timeout value		*/
 volatile uchar *NetTxPacket = 0;	/* THE transmit packet			*/
 
 static int net_check_prereq (proto_t protocol);
@@ -391,7 +392,7 @@ restart:
 		 *	Check for a timeout, and run the timeout handler
 		 *	if we have one.
 		 */
-		if (timeHandler && (get_timer(0) > timeValue)) {
+		if (timeHandler && ((get_timer(0) - timeStart) > timeDelta)) {
 			thand_f *x;
 
 			x = timeHandler;
@@ -491,7 +492,8 @@ NetSetTimeout(int iv, thand_f * f)
 		timeHandler = (thand_f *)0;
 	} else {
 		timeHandler = f;
-		timeValue = get_timer(0) + iv;
+		timeStart = get_timer(0);
+		timeDelta = iv;
 	}
 }
 
diff --git a/net/tftp.c b/net/tftp.c
index 5598be3..1154cb9 100644
--- a/net/tftp.c
+++ b/net/tftp.c
@@ -240,7 +240,7 @@ TftpHandler (uchar * pkt, unsigned dest, unsigned src, unsigned len)
 static void
 TftpTimeout (void)
 {
-	if (++TftpTimeoutCount >= TIMEOUT_COUNT) {
+	if (++TftpTimeoutCount > TIMEOUT_COUNT) {
 		puts ("\nRetry count exceeded; starting again\n");
 		NetStartAgain ();
 	} else {
diff --git a/tools/Makefile b/tools/Makefile
index ac35ee3..654467d 100644
--- a/tools/Makefile
+++ b/tools/Makefile
@@ -152,6 +152,9 @@ inca-swap-bytes.o:	inca-swap-bytes.c
 		$(CC) -g $(CFLAGS) -c $<
 
 subdirs:
+ifeq ($(TOOLSUBDIRS),)
+		@:
+else
 		@for dir in $(TOOLSUBDIRS) ; do \
 		    $(MAKE) \
 			HOSTOS=$(HOSTOS) \
@@ -160,6 +163,8 @@ subdirs:
 		   	HOST_LDFLAGS="$(HOST_LDFLAGS)" \
 			-C $$dir || exit 1 ; \
 		done
+endif
+
 environment.c:
 		ln -s ../common/environment.c environment.c