Merge branch 'master' of git://git.denx.de/u-boot-blackfin

9 files changed, 331 insertions, 212 deletions

diff --git a/board/bf537-stamp/spi_flash.c b/board/bf537-stamp/spi_flash.c
index b147ce7..7b764b4 100644
--- a/board/bf537-stamp/spi_flash.c
+++ b/board/bf537-stamp/spi_flash.c
@@ -180,13 +180,7 @@ static struct manufacturer_info flash_manufacturers[] = {
  *	BF51x, BF533, BF561: SSEL2
  */
 #ifndef CONFIG_SPI_FLASH_SSEL
-# if defined(__ADSPBF531__) || defined(__ADSPBF532__) || defined(__ADSPBF533__) || \
-     defined(__ADSPBF538__) || defined(__ADSPBF539__) || defined(__ADSPBF561__) || \
-     defined(__ADSPBF51x__)
-#  define CONFIG_SPI_FLASH_SSEL 2
-# else
-#  define CONFIG_SPI_FLASH_SSEL 1
-# endif
+# define CONFIG_SPI_FLASH_SSEL BFIN_BOOT_SPI_SSEL
 #endif
 #define SSEL_MASK (1 << CONFIG_SPI_FLASH_SSEL)
 
diff --git a/cpu/blackfin/initcode.c b/cpu/blackfin/initcode.c
index 6091f8c..ae0016d 100644
--- a/cpu/blackfin/initcode.c
+++ b/cpu/blackfin/initcode.c
@@ -20,7 +20,7 @@
 #include "serial.h"
 
 __attribute__((always_inline))
-static inline uint32_t serial_init(void)
+static inline void serial_init(void)
 {
 #ifdef __ADSPBF54x__
 # ifdef BFIN_BOOT_UART_USE_RTS
@@ -61,25 +61,16 @@ static inline uint32_t serial_init(void)
 	}
 #endif
 
-	uint32_t old_baud;
-	if (BFIN_DEBUG_EARLY_SERIAL || CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_UART)
-		old_baud = serial_early_get_baud();
-	else
-		old_baud = CONFIG_BAUDRATE;
-
 	if (BFIN_DEBUG_EARLY_SERIAL) {
+		int ucen = *pUART_GCTL & UCEN;
 		serial_early_init();
 
 		/* If the UART is off, that means we need to program
 		 * the baud rate ourselves initially.
 		 */
-		if (!old_baud) {
-			old_baud = CONFIG_BAUDRATE;
+		if (ucen != UCEN)
 			serial_early_set_baud(CONFIG_BAUDRATE);
-		}
 	}
-
-	return old_baud;
 }
 
 __attribute__((always_inline))
@@ -93,30 +84,6 @@ static inline void serial_deinit(void)
 #endif
 }
 
-/* We need to reset the baud rate when we have early debug turned on
- * or when we are booting over the UART.
- * XXX: we should fix this to calc the old baud and restore it rather
- *      than hardcoding it via CONFIG_LDR_LOAD_BAUD ... but we have
- *      to figure out how to avoid the division in the baud calc ...
- */
-__attribute__((always_inline))
-static inline void serial_reset_baud(uint32_t baud)
-{
-	if (!BFIN_DEBUG_EARLY_SERIAL && CONFIG_BFIN_BOOT_MODE != BFIN_BOOT_UART)
-		return;
-
-#ifndef CONFIG_LDR_LOAD_BAUD
-# define CONFIG_LDR_LOAD_BAUD 115200
-#endif
-
-	if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_BYPASS)
-		serial_early_set_baud(baud);
-	else if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_UART)
-		serial_early_set_baud(CONFIG_LDR_LOAD_BAUD);
-	else
-		serial_early_set_baud(CONFIG_BAUDRATE);
-}
-
 __attribute__((always_inline))
 static inline void serial_putc(char c)
 {
@@ -133,12 +100,22 @@ static inline void serial_putc(char c)
 }
 
 
-/* Max SCLK can be 133MHz ... dividing that by 4 gives
- * us a freq of 33MHz for SPI which should generally be
+/* Max SCLK can be 133MHz ... dividing that by (2*4) gives
+ * us a freq of 16MHz for SPI which should generally be
  * slow enough for the slow reads the bootrom uses.
  */
+#if !defined(CONFIG_SPI_FLASH_SLOW_READ) && \
+    ((defined(__ADSPBF52x__) && __SILICON_REVISION__ >= 2) || \
+     (defined(__ADSPBF54x__) && __SILICON_REVISION__ >= 1))
+# define BOOTROM_SUPPORTS_SPI_FAST_READ 1
+#else
+# define BOOTROM_SUPPORTS_SPI_FAST_READ 0
+#endif
 #ifndef CONFIG_SPI_BAUD_INITBLOCK
-# define CONFIG_SPI_BAUD_INITBLOCK 4
+# define CONFIG_SPI_BAUD_INITBLOCK (BOOTROM_SUPPORTS_SPI_FAST_READ ? 2 : 4)
+#endif
+#ifdef SPI0_BAUD
+# define bfin_write_SPI_BAUD bfin_write_SPI0_BAUD
 #endif
 
 /* PLL_DIV defines */
@@ -168,11 +145,18 @@ static inline void serial_putc(char c)
 #ifndef CONFIG_EBIU_RSTCTL_VAL
 # define CONFIG_EBIU_RSTCTL_VAL 0 /* only MDDRENABLE is useful */
 #endif
+#if ((CONFIG_EBIU_RSTCTL_VAL & 0xFFFFFFC4) != 0)
+# error invalid EBIU_RSTCTL value: must not set reserved bits
+#endif
 
 #ifndef CONFIG_EBIU_MBSCTL_VAL
 # define CONFIG_EBIU_MBSCTL_VAL 0
 #endif
 
+#if defined(CONFIG_EBIU_DDRQUE_VAL) && ((CONFIG_EBIU_DDRQUE_VAL & 0xFFFF8000) != 0)
+# error invalid EBIU_DDRQUE value: must not set reserved bits
+#endif
+
 /* Make sure our voltage value is sane so we don't blow up! */
 #ifndef CONFIG_VR_CTL_VAL
 # define BFIN_CCLK ((CONFIG_CLKIN_HZ * CONFIG_VCO_MULT) / CONFIG_CCLK_DIV)
@@ -199,6 +183,9 @@ static inline void serial_putc(char c)
 # elif defined(__ADSPBF54x__)	/* TBD; use default */
 #  undef CONFIG_VR_CTL_VLEV
 #  define CONFIG_VR_CTL_VLEV VLEV_120
+# elif defined(__ADSPBF538__) || defined(__ADSPBF539__)	/* TBD; use default */
+#  undef CONFIG_VR_CTL_VLEV
+#  define CONFIG_VR_CTL_VLEV VLEV_125
 # endif
 
 # ifdef CONFIG_BFIN_MAC
@@ -216,10 +203,17 @@ static inline void serial_putc(char c)
 # define CONFIG_VR_CTL_VAL (CONFIG_VR_CTL_CLKBUF | CONFIG_VR_CTL_VLEV | CONFIG_VR_CTL_FREQ)
 #endif
 
-__attribute__((saveall))
+BOOTROM_CALLED_FUNC_ATTR
 void initcode(ADI_BOOT_DATA *bootstruct)
 {
-	uint32_t old_baud = serial_init();
+	/* Save the clock pieces that are used in baud rate calculation */
+	unsigned int sdivB, divB, vcoB;
+	serial_init();
+	if (BFIN_DEBUG_EARLY_SERIAL || CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_UART) {
+		sdivB = bfin_read_PLL_DIV() & 0xf;
+		vcoB = (bfin_read_PLL_CTL() >> 9) & 0x3f;
+		divB = serial_early_get_div();
+	}
 
 #ifdef CONFIG_HW_WATCHDOG
 # ifndef CONFIG_HW_WATCHDOG_TIMEOUT_INITCODE
@@ -244,12 +238,11 @@ void initcode(ADI_BOOT_DATA *bootstruct)
 	 * boot.  Once we switch over to u-boot's SPI flash driver, we'll
 	 * increase the speed appropriately.
 	 */
-	if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_SPI_MASTER)
-#ifdef SPI0_BAUD
-		bfin_write_SPI0_BAUD(CONFIG_SPI_BAUD_INITBLOCK);
-#else
+	if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_SPI_MASTER) {
+		if (BOOTROM_SUPPORTS_SPI_FAST_READ && CONFIG_SPI_BAUD_INITBLOCK < 4)
+			bootstruct->dFlags |= BFLAG_FASTREAD;
 		bfin_write_SPI_BAUD(CONFIG_SPI_BAUD_INITBLOCK);
-#endif
+	}
 
 	serial_putc('B');
 
@@ -267,40 +260,68 @@ void initcode(ADI_BOOT_DATA *bootstruct)
 	bfin_write_SIC_IWR(1);
 #endif
 
-	serial_putc('L');
+	/* With newer bootroms, we use the helper function to set up
+	 * the memory controller.  Older bootroms lacks such helpers
+	 * so we do it ourselves.
+	 */
+	if (BOOTROM_CAPS_SYSCONTROL) {
+		serial_putc('S');
+
+		ADI_SYSCTRL_VALUES memory_settings;
+		memory_settings.uwVrCtl = CONFIG_VR_CTL_VAL;
+		memory_settings.uwPllCtl = CONFIG_PLL_CTL_VAL;
+		memory_settings.uwPllDiv = CONFIG_PLL_DIV_VAL;
+		memory_settings.uwPllLockCnt = CONFIG_PLL_LOCKCNT_VAL;
+		syscontrol(SYSCTRL_WRITE | SYSCTRL_VRCTL | SYSCTRL_PLLCTL | SYSCTRL_PLLDIV | SYSCTRL_LOCKCNT |
+			(CONFIG_VR_CTL_VAL & FREQ_MASK ? SYSCTRL_INTVOLTAGE : SYSCTRL_EXTVOLTAGE), &memory_settings, NULL);
+	} else {
+		serial_putc('L');
 
-	bfin_write_PLL_LOCKCNT(CONFIG_PLL_LOCKCNT_VAL);
+		bfin_write_PLL_LOCKCNT(CONFIG_PLL_LOCKCNT_VAL);
 
-	serial_putc('A');
+		serial_putc('A');
 
-	/* Only reprogram when needed to avoid triggering unnecessary
-	 * PLL relock sequences.
-	 */
-	if (bfin_read_VR_CTL() != CONFIG_VR_CTL_VAL) {
-		serial_putc('!');
-		bfin_write_VR_CTL(CONFIG_VR_CTL_VAL);
-		asm("idle;");
-	}
+		/* Only reprogram when needed to avoid triggering unnecessary
+		 * PLL relock sequences.
+		 */
+		if (bfin_read_VR_CTL() != CONFIG_VR_CTL_VAL) {
+			serial_putc('!');
+			bfin_write_VR_CTL(CONFIG_VR_CTL_VAL);
+			asm("idle;");
+		}
 
-	serial_putc('C');
+		serial_putc('C');
 
-	bfin_write_PLL_DIV(CONFIG_PLL_DIV_VAL);
+		bfin_write_PLL_DIV(CONFIG_PLL_DIV_VAL);
 
-	serial_putc('K');
+		serial_putc('K');
 
-	/* Only reprogram when needed to avoid triggering unnecessary
-	 * PLL relock sequences.
-	 */
-	if (bfin_read_PLL_CTL() != CONFIG_PLL_CTL_VAL) {
-		serial_putc('!');
-		bfin_write_PLL_CTL(CONFIG_PLL_CTL_VAL);
-		asm("idle;");
+		/* Only reprogram when needed to avoid triggering unnecessary
+		 * PLL relock sequences.
+		 */
+		if (bfin_read_PLL_CTL() != CONFIG_PLL_CTL_VAL) {
+			serial_putc('!');
+			bfin_write_PLL_CTL(CONFIG_PLL_CTL_VAL);
+			asm("idle;");
+		}
 	}
 
 	/* Since we've changed the SCLK above, we may need to update
 	 * the UART divisors (UART baud rates are based on SCLK).
+	 * Do the division by hand as there are no native instructions
+	 * for dividing which means we'd generate a libgcc reference.
 	 */
-	serial_reset_baud(old_baud);
+	if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_UART) {
+		unsigned int sdivR, vcoR;
+		sdivR = bfin_read_PLL_DIV() & 0xf;
+		vcoR = (bfin_read_PLL_CTL() >> 9) & 0x3f;
+		int dividend = sdivB * divB * vcoR;
+		int divisor = vcoB * sdivR;
+		unsigned int quotient;
+		for (quotient = 0; dividend > 0; ++quotient)
+			dividend -= divisor;
+		serial_early_put_div(quotient - ANOMALY_05000230);
+	}
 
 	serial_putc('F');
 
diff --git a/cpu/blackfin/serial.h b/cpu/blackfin/serial.h
index f671096..ce39148 100644
--- a/cpu/blackfin/serial.h
+++ b/cpu/blackfin/serial.h
@@ -156,16 +156,25 @@ static inline void serial_early_init(void)
 }
 
 __attribute__((always_inline))
-static inline uint32_t serial_early_get_baud(void)
+static inline void serial_early_put_div(uint16_t divisor)
 {
-	/* If the UART isnt enabled, then we are booting an LDR
-	 * from a non-UART source (so like flash) which means
-	 * the baud rate here is meaningless.
-	 */
-	if ((*pUART_GCTL & UCEN) != UCEN)
-		return 0;
+	/* Set DLAB in LCR to Access DLL and DLH */
+	ACCESS_LATCH();
+	SSYNC();
 
-#if (0)	/* See comment for serial_reset_baud() in initcode.c */
+	/* Program the divisor to get the baud rate we want */
+	*pUART_DLL = LOB(divisor);
+	*pUART_DLH = HIB(divisor);
+	SSYNC();
+
+	/* Clear DLAB in LCR to Access THR RBR IER */
+	ACCESS_PORT_IER();
+	SSYNC();
+}
+
+__attribute__((always_inline))
+static inline uint16_t serial_early_get_div(void)
+{
 	/* Set DLAB in LCR to Access DLL and DLH */
 	ACCESS_LATCH();
 	SSYNC();
@@ -173,16 +182,12 @@ static inline uint32_t serial_early_get_baud(void)
 	uint8_t dll = *pUART_DLL;
 	uint8_t dlh = *pUART_DLH;
 	uint16_t divisor = (dlh << 8) | dll;
-	uint32_t baud = get_sclk() / (divisor * 16);
 
 	/* Clear DLAB in LCR to Access THR RBR IER */
 	ACCESS_PORT_IER();
 	SSYNC();
 
-	return baud;
-#else
-	return CONFIG_BAUDRATE;
-#endif
+	return divisor;
 }
 
 __attribute__((always_inline))
@@ -192,20 +197,7 @@ static inline void serial_early_set_baud(uint32_t baud)
 	 * weird multiplication is to make sure we over sample just
 	 * a little rather than under sample the incoming signals.
 	 */
-	uint16_t divisor = (get_sclk() + (baud * 8)) / (baud * 16) - ANOMALY_05000230;
-
-	/* Set DLAB in LCR to Access DLL and DLH */
-	ACCESS_LATCH();
-	SSYNC();
-
-	/* Program the divisor to get the baud rate we want */
-	*pUART_DLL = LOB(divisor);
-	*pUART_DLH = HIB(divisor);
-	SSYNC();
-
-	/* Clear DLAB in LCR to Access THR RBR IER */
-	ACCESS_PORT_IER();
-	SSYNC();
+	serial_early_put_div((get_sclk() + (baud * 8)) / (baud * 16) - ANOMALY_05000230);
 }
 
 #ifndef BFIN_IN_INITCODE
@@ -235,32 +227,6 @@ static inline void serial_early_puts(const char *s)
 #endif
 .endm
 
-/* Recursively expand calls to _serial_putc for every byte
- * passed to us.  Append a newline when we're all done.
- */
-.macro _serial_early_putc byte:req morebytes:vararg
-#ifdef CONFIG_DEBUG_EARLY_SERIAL
-	R0 = \byte;
-	call _serial_putc;
-.ifnb \morebytes
-	_serial_early_putc \morebytes
-.else
-.if (\byte != '\n')
-	_serial_early_putc '\n'
-.endif
-.endif
-#endif
-.endm
-
-/* Wrapper around recurisve _serial_early_putc macro which
- * simply prepends the string "Early: "
- */
-.macro serial_early_putc byte:req morebytes:vararg
-#ifdef CONFIG_DEBUG_EARLY_SERIAL
-	_serial_early_putc 'E', 'a', 'r', 'l', 'y', ':', ' ', \byte, \morebytes
-#endif
-.endm
-
 /* Since we embed the string right into our .text section, we need
  * to find its address.  We do this by getting our PC and adding 2
  * bytes (which is the length of the jump instruction).  Then we
diff --git a/include/asm-blackfin/blackfin-config-pre.h b/include/asm-blackfin/blackfin-config-pre.h
index a1fae5c..9df01ad 100644
--- a/include/asm-blackfin/blackfin-config-pre.h
+++ b/include/asm-blackfin/blackfin-config-pre.h
@@ -60,4 +60,13 @@ static inline const char *get_bfin_boot_mode(int bfin_boot)
 }
 #endif
 
+/* Define the default SPI CS used when booting out of SPI */
+#if defined(__ADSPBF531__) || defined(__ADSPBF532__) || defined(__ADSPBF533__) || \
+    defined(__ADSPBF538__) || defined(__ADSPBF539__) || defined(__ADSPBF561__) || \
+    defined(__ADSPBF51x__)
+# define BFIN_BOOT_SPI_SSEL 2
+#else
+# define BFIN_BOOT_SPI_SSEL 1
+#endif
+
 #endif
diff --git a/include/asm-blackfin/mach-bf527/anomaly.h b/include/asm-blackfin/mach-bf527/anomaly.h
index 7c5127e..035e8d8 100644
--- a/include/asm-blackfin/mach-bf527/anomaly.h
+++ b/include/asm-blackfin/mach-bf527/anomaly.h
@@ -7,82 +7,154 @@
  */
 
 /* This file shoule be up to date with:
- *  - Revision C, 01/25/2008; ADSP-BF527 Blackfin Processor Anomaly List
+ *  - Revision B, 08/12/2008; ADSP-BF526 Blackfin Processor Anomaly List
+ *  - Revision E, 08/18/2008; ADSP-BF527 Blackfin Processor Anomaly List
  */
 
 #ifndef _MACH_ANOMALY_H_
 #define _MACH_ANOMALY_H_
 
+#if defined(__ADSPBF522__) || defined(__ADSPBF524__) || defined(__ADSPBF526__)
+# define ANOMALY_BF526 1
+#else
+# define ANOMALY_BF526 0
+#endif
+#if defined(__ADSPBF523__) || defined(__ADSPBF525__) || defined(__ADSPBF527__)
+# define ANOMALY_BF527 1
+#else
+# define ANOMALY_BF527 0
+#endif
+
 /* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */
 #define ANOMALY_05000074 (1)
 /* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */
-#define ANOMALY_05000119 (1)
+#define ANOMALY_05000119 (1)	/* note: brokenness is noted in documentation, not anomaly sheet */
 /* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */
 #define ANOMALY_05000122 (1)
 /* Spurious Hardware Error from an Access in the Shadow of a Conditional Branch */
 #define ANOMALY_05000245 (1)
 /* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */
 #define ANOMALY_05000265 (1)
-/* Errors when SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */
-#define ANOMALY_05000312 (1)
+/* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */
+#define ANOMALY_05000310 (1)
+/* PPI Is Level-Sensitive on First Transfer In Single Frame Sync Modes */
+#define ANOMALY_05000313 (__SILICON_REVISION__ < 2)
 /* Incorrect Access of OTP_STATUS During otp_write() Function */
-#define ANOMALY_05000328 (1)
+#define ANOMALY_05000328 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
 /* Disallowed Configuration Prevents Subsequent Allowed Configuration on Host DMA Port */
-#define ANOMALY_05000337 (1)
+#define ANOMALY_05000337 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
 /* Ethernet MAC MDIO Reads Do Not Meet IEEE Specification */
-#define ANOMALY_05000341 (1)
+#define ANOMALY_05000341 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
 /* TWI May Not Operate Correctly Under Certain Signal Termination Conditions */
-#define ANOMALY_05000342 (1)
+#define ANOMALY_05000342 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
 /* USB Calibration Value Is Not Initialized */
-#define ANOMALY_05000346 (1)
+#define ANOMALY_05000346 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+/* USB Calibration Value to use */
+#define ANOMALY_05000346_value 0xE510
 /* Preboot Routine Incorrectly Alters Reset Value of USB Register */
-#define ANOMALY_05000347 (1)
+#define ANOMALY_05000347 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
 /* Security Features Are Not Functional */
-#define ANOMALY_05000348 (__SILICON_REVISION__ < 1)
+#define ANOMALY_05000348 (ANOMALY_BF527 && __SILICON_REVISION__ < 1)
+/* bfrom_SysControl() Firmware Function Performs Improper System Reset */
+#define ANOMALY_05000353 (ANOMALY_BF526)
 /* Regulator Programming Blocked when Hibernate Wakeup Source Remains Active */
-#define ANOMALY_05000355 (1)
+#define ANOMALY_05000355 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
 /* Serial Port (SPORT) Multichannel Transmit Failure when Channel 0 Is Disabled */
-#define ANOMALY_05000357 (1)
+#define ANOMALY_05000357 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
 /* Incorrect Revision Number in DSPID Register */
-#define ANOMALY_05000364 (__SILICON_REVISION__ > 0)
+#define ANOMALY_05000364 (ANOMALY_BF527 && __SILICON_REVISION__ == 1)
 /* PPI Underflow Error Goes Undetected in ITU-R 656 Mode */
 #define ANOMALY_05000366 (1)
-/* New Feature: Higher Default CCLK Rate */
-#define ANOMALY_05000368 (1)
+/* Incorrect Default CSEL Value in PLL_DIV */
+#define ANOMALY_05000368 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
 /* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */
-#define ANOMALY_05000371 (1)
+#define ANOMALY_05000371 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
 /* Authentication Fails To Initiate */
-#define ANOMALY_05000376 (__SILICON_REVISION__ > 0)
+#define ANOMALY_05000376 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
 /* Data Read From L3 Memory by USB DMA May be Corrupted */
-#define ANOMALY_05000380 (1)
-/* USB Full-speed Mode not Fully Tested */
-#define ANOMALY_05000381 (1)
-/* New Feature: Boot from OTP Memory */
-#define ANOMALY_05000385 (1)
-/* New Feature: bfrom_SysControl() Routine */
-#define ANOMALY_05000386 (1)
-/* New Feature: Programmable Preboot Settings */
-#define ANOMALY_05000387 (1)
+#define ANOMALY_05000380 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+/* 8-Bit NAND Flash Boot Mode Not Functional */
+#define ANOMALY_05000382 (__SILICON_REVISION__ < 2)
+/* Host Must Not Read Back During Host DMA Boot */
+#define ANOMALY_05000384 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+/* Boot from OTP Memory Not Functional */
+#define ANOMALY_05000385 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+/* bfrom_SysControl() Firmware Routine Not Functional */
+#define ANOMALY_05000386 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+/* Programmable Preboot Settings Not Functional */
+#define ANOMALY_05000387 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+/* CRC32 Checksum Support Not Functional */
+#define ANOMALY_05000388 (__SILICON_REVISION__ < 2)
 /* Reset Vector Must Not Be in SDRAM Memory Space */
-#define ANOMALY_05000389 (1)
-/* New Feature: pTempCurrent Added to ADI_BOOT_DATA Structure */
-#define ANOMALY_05000392 (1)
-/* New Feature: dTempByteCount Value Increased in ADI_BOOT_DATA Structure */
-#define ANOMALY_05000393 (1)
-/* New Feature: Log Buffer Functionality */
-#define ANOMALY_05000394 (1)
-/* New Feature: Hook Routine Functionality */
-#define ANOMALY_05000395 (1)
-/* New Feature: Header Indirect Bit */
-#define ANOMALY_05000396 (1)
-/* New Feature: BK_ONES, BK_ZEROS, and BK_DATECODE Constants */
-#define ANOMALY_05000397 (1)
-/* New Feature: SWRESET, DFRESET and WDRESET Bits Added to SYSCR Register */
-#define ANOMALY_05000398 (1)
-/* New Feature: BCODE_NOBOOT Added to BCODE Field of SYSCR Register */
-#define ANOMALY_05000399 (1)
+#define ANOMALY_05000389 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+/* pTempCurrent Not Present in ADI_BOOT_DATA Structure */
+#define ANOMALY_05000392 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+/* Deprecated Value of dTempByteCount in ADI_BOOT_DATA Structure */
+#define ANOMALY_05000393 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+/* Log Buffer Not Functional */
+#define ANOMALY_05000394 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+/* Hook Routine Not Functional */
+#define ANOMALY_05000395 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+/* Header Indirect Bit Not Functional */
+#define ANOMALY_05000396 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+/* BK_ONES, BK_ZEROS, and BK_DATECODE Constants Not Functional */
+#define ANOMALY_05000397 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+/* SWRESET, DFRESET and WDRESET Bits in the SYSCR Register Not Functional */
+#define ANOMALY_05000398 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+/* BCODE_NOBOOT in BCODE Field of SYSCR Register Not Functional */
+#define ANOMALY_05000399 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
 /* PPI Data Signals D0 and D8 do not Tristate After Disabling PPI */
-#define ANOMALY_05000401 (1)
+#define ANOMALY_05000401 (__SILICON_REVISION__ < 2)
+/* Level-Sensitive External GPIO Wakeups May Cause Indefinite Stall */
+#define ANOMALY_05000403 (__SILICON_REVISION__ < 2)
+/* Lockbox SESR Disallows Certain User Interrupts */
+#define ANOMALY_05000404 (__SILICON_REVISION__ < 2)
+/* Lockbox SESR Firmware Does Not Save/Restore Full Context */
+#define ANOMALY_05000405 (1)
+/* Lockbox SESR Firmware Arguments Are Not Retained After First Initialization */
+#define ANOMALY_05000407 (__SILICON_REVISION__ < 2)
+/* Lockbox Firmware Memory Cleanup Routine Does not Clear Registers */
+#define ANOMALY_05000408 (1)
+/* Lockbox firmware leaves MDMA0 channel enabled */
+#define ANOMALY_05000409 (__SILICON_REVISION__ < 2)
+/* Incorrect Default Internal Voltage Regulator Setting */
+#define ANOMALY_05000410 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+/* bfrom_SysControl() Firmware Function Cannot be Used to Enter Power Saving Modes */
+#define ANOMALY_05000411 (__SILICON_REVISION__ < 2)
+/* OTP_CHECK_FOR_PREV_WRITE Bit is Not Functional in bfrom_OtpWrite() API */
+#define ANOMALY_05000414 (__SILICON_REVISION__ < 2)
+/* DEB2_URGENT Bit Not Functional */
+#define ANOMALY_05000415 (__SILICON_REVISION__ < 2)
+/* Speculative Fetches Can Cause Undesired External FIFO Operations */
+#define ANOMALY_05000416 (1)
+/* SPORT0 Ignores External TSCLK0 on PG14 When TMR6 is an Output */
+#define ANOMALY_05000417 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+/* tSFSPE and tHFSPE Do Not Meet Data Sheet Specifications */
+#define ANOMALY_05000418 (__SILICON_REVISION__ < 2)
+/* USB PLL_STABLE Bit May Not Accurately Reflect the USB PLL's Status */
+#define ANOMALY_05000420 (__SILICON_REVISION__ < 2)
+/* TWI Fall Time (Tof) May Violate the Minimum I2C Specification */
+#define ANOMALY_05000421 (1)
+/* TWI Input Capacitance (Ci) May Violate the Maximum I2C Specification */
+#define ANOMALY_05000422 (ANOMALY_BF527 && __SILICON_REVISION__ > 1)
+/* Certain Ethernet Frames With Errors are Misclassified in RMII Mode */
+#define ANOMALY_05000423 (__SILICON_REVISION__ < 2)
+/* Internal Voltage Regulator Not Trimmed */
+#define ANOMALY_05000424 (ANOMALY_BF527 && __SILICON_REVISION__ < 2)
+/* Multichannel SPORT Channel Misalignment Under Specific Configuration */
+#define ANOMALY_05000425 (__SILICON_REVISION__ < 2)
+/* Speculative Fetches of Indirect-Pointer Instructions Can Cause Spurious Hardware Errors */
+#define ANOMALY_05000426 (1)
+/* WB_EDGE Bit in NFC_IRQSTAT Incorrectly Reflects Buffer Status Instead of IRQ Status */
+#define ANOMALY_05000429 (__SILICON_REVISION__ < 2)
+/* Software System Reset Corrupts PLL_LOCKCNT Register */
+#define ANOMALY_05000430 (ANOMALY_BF527 && __SILICON_REVISION__ > 1)
+/* bfrom_SysControl() Does Not Clear SIC_IWR1 Before Executing PLL Programming Sequence */
+#define ANOMALY_05000432 (ANOMALY_BF526)
+/* Certain SIC Registers are not Reset After Soft or Core Double Fault Reset */
+#define ANOMALY_05000435 ((ANOMALY_BF526 && __SILICON_REVISION__ < 1) || ANOMALY_BF527)
+/* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */
+#define ANOMALY_05000443 (1)
 
 /* Anomalies that don't exist on this proc */
 #define ANOMALY_05000125 (0)
@@ -95,10 +167,12 @@
 #define ANOMALY_05000263 (0)
 #define ANOMALY_05000266 (0)
 #define ANOMALY_05000273 (0)
+#define ANOMALY_05000285 (0)
 #define ANOMALY_05000307 (0)
 #define ANOMALY_05000311 (0)
+#define ANOMALY_05000312 (0)
 #define ANOMALY_05000323 (0)
-#define ANOMALY_05000353 (1)
 #define ANOMALY_05000363 (0)
+#define ANOMALY_05000412 (0)
 
 #endif
diff --git a/include/asm-blackfin/mach-bf533/anomaly.h b/include/asm-blackfin/mach-bf533/anomaly.h
index 7c34c38..0d3a034 100644
--- a/include/asm-blackfin/mach-bf533/anomaly.h
+++ b/include/asm-blackfin/mach-bf533/anomaly.h
@@ -7,7 +7,7 @@
  */
 
 /* This file shoule be up to date with:
- *  - Revision C, 02/08/2008; ADSP-BF531/BF532/BF533 Blackfin Processor Anomaly List
+ *  - Revision E, 09/18/2008; ADSP-BF531/BF532/BF533 Blackfin Processor Anomaly List
  */
 
 #ifndef _MACH_ANOMALY_H_
@@ -97,11 +97,11 @@
 /* UART STB Bit Incorrectly Affects Receiver Setting */
 #define ANOMALY_05000231 (__SILICON_REVISION__ < 5)
 /* PPI_FS3 Is Not Driven in 2 or 3 Internal Frame Sync Transmit Modes */
-#define ANOMALY_05000233 (__SILICON_REVISION__ < 4)
+#define ANOMALY_05000233 (__SILICON_REVISION__ < 6)
 /* Incorrect Revision Number in DSPID Register */
 #define ANOMALY_05000234 (__SILICON_REVISION__ == 4)
 /* DF Bit in PLL_CTL Register Does Not Respond to Hardware Reset */
-#define ANOMALY_05000242 (__SILICON_REVISION__ < 4)
+#define ANOMALY_05000242 (__SILICON_REVISION__ < 5)
 /* If I-Cache Is On, CSYNC/SSYNC/IDLE Around Change of Control Causes Failures */
 #define ANOMALY_05000244 (__SILICON_REVISION__ < 5)
 /* Spurious Hardware Error from an Access in the Shadow of a Conditional Branch */
@@ -131,7 +131,7 @@
 /* CSYNC/SSYNC/IDLE Causes Infinite Stall in Penultimate Instruction in Hardware Loop */
 #define ANOMALY_05000264 (__SILICON_REVISION__ < 5)
 /* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */
-#define ANOMALY_05000265 (__SILICON_REVISION__ < 5)
+#define ANOMALY_05000265 (1)
 /* High I/O Activity Causes Output Voltage of Internal Voltage Regulator (Vddint) to Increase */
 #define ANOMALY_05000269 (__SILICON_REVISION__ < 5)
 /* High I/O Activity Causes Output Voltage of Internal Voltage Regulator (Vddint) to Decrease */
@@ -141,23 +141,23 @@
 /* Certain Data Cache Writethrough Modes Fail for Vddint <= 0.9V */
 #define ANOMALY_05000272 (1)
 /* Writes to Synchronous SDRAM Memory May Be Lost */
-#define ANOMALY_05000273 (1)
+#define ANOMALY_05000273 (__SILICON_REVISION__ < 6)
 /* Timing Requirements Change for External Frame Sync PPI Modes with Non-Zero PPI_DELAY */
 #define ANOMALY_05000276 (1)
 /* Writes to an I/O Data Register One SCLK Cycle after an Edge Is Detected May Clear Interrupt */
-#define ANOMALY_05000277 (1)
+#define ANOMALY_05000277 (__SILICON_REVISION__ < 6)
 /* Disabling Peripherals with DMA Running May Cause DMA System Instability */
-#define ANOMALY_05000278 (1)
+#define ANOMALY_05000278 (__SILICON_REVISION__ < 6)
 /* False Hardware Error Exception When ISR Context Is Not Restored */
-#define ANOMALY_05000281 (1)
+#define ANOMALY_05000281 (__SILICON_REVISION__ < 6)
 /* Memory DMA Corruption with 32-Bit Data and Traffic Control */
-#define ANOMALY_05000282 (1)
+#define ANOMALY_05000282 (__SILICON_REVISION__ < 6)
 /* System MMR Write Is Stalled Indefinitely When Killed in a Particular Stage */
-#define ANOMALY_05000283 (1)
+#define ANOMALY_05000283 (__SILICON_REVISION__ < 6)
 /* SPORTs May Receive Bad Data If FIFOs Fill Up */
-#define ANOMALY_05000288 (1)
+#define ANOMALY_05000288 (__SILICON_REVISION__ < 6)
 /* Memory-To-Memory DMA Source/Destination Descriptors Must Be in Same Memory Space */
-#define ANOMALY_05000301 (1)
+#define ANOMALY_05000301 (__SILICON_REVISION__ < 6)
 /* SSYNCs After Writes To DMA MMR Registers May Not Be Handled Correctly */
 #define ANOMALY_05000302 (__SILICON_REVISION__ < 5)
 /* New Feature: Additional Hysteresis on SPORT Input Pins (Not Available On Older Silicon) */
@@ -169,30 +169,37 @@
 /* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */
 #define ANOMALY_05000310 (1)
 /* Erroneous Flag (GPIO) Pin Operations under Specific Sequences */
-#define ANOMALY_05000311 (1)
+#define ANOMALY_05000311 (__SILICON_REVISION__ < 6)
 /* Errors When SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */
-#define ANOMALY_05000312 (1)
+#define ANOMALY_05000312 (__SILICON_REVISION__ < 6)
 /* PPI Is Level-Sensitive on First Transfer */
-#define ANOMALY_05000313 (1)
+#define ANOMALY_05000313 (__SILICON_REVISION__ < 6)
 /* Killed System MMR Write Completes Erroneously On Next System MMR Access */
-#define ANOMALY_05000315 (1)
+#define ANOMALY_05000315 (__SILICON_REVISION__ < 6)
 /* Internal Voltage Regulator Values of 1.05V, 1.10V and 1.15V Not Allowed for LQFP Packages */
-#define ANOMALY_05000319 (ANOMALY_BF531 || ANOMALY_BF532)
+#define ANOMALY_05000319 ((ANOMALY_BF531 || ANOMALY_BF532) && __SILICON_REVISION__ < 6)
 /* Serial Port (SPORT) Multichannel Transmit Failure when Channel 0 Is Disabled */
-#define ANOMALY_05000357 (1)
+#define ANOMALY_05000357 (__SILICON_REVISION__ < 6)
 /* UART Break Signal Issues */
 #define ANOMALY_05000363 (__SILICON_REVISION__ < 5)
 /* PPI Underflow Error Goes Undetected in ITU-R 656 Mode */
 #define ANOMALY_05000366 (1)
 /* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */
-#define ANOMALY_05000371 (1)
+#define ANOMALY_05000371 (__SILICON_REVISION__ < 6)
 /* PPI Does Not Start Properly In Specific Mode */
-#define ANOMALY_05000400 (__SILICON_REVISION__ >= 5)
+#define ANOMALY_05000400 (__SILICON_REVISION__ == 5)
 /* SSYNC Stalls Processor when Executed from Non-Cacheable Memory */
-#define ANOMALY_05000402 (__SILICON_REVISION__ >= 5)
+#define ANOMALY_05000402 (__SILICON_REVISION__ == 5)
 /* Level-Sensitive External GPIO Wakeups May Cause Indefinite Stall */
 #define ANOMALY_05000403 (1)
-
+/* Speculative Fetches Can Cause Undesired External FIFO Operations */
+#define ANOMALY_05000416 (1)
+/* Multichannel SPORT Channel Misalignment Under Specific Configuration */
+#define ANOMALY_05000425 (1)
+/* Speculative Fetches of Indirect-Pointer Instructions Can Cause False Hardware Errors */
+#define ANOMALY_05000426 (1)
+/* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */
+#define ANOMALY_05000443 (1)
 
 /* These anomalies have been "phased" out of analog.com anomaly sheets and are
  * here to show running on older silicon just isn't feasible.
@@ -271,5 +278,9 @@
 #define ANOMALY_05000266 (0)
 #define ANOMALY_05000323 (0)
 #define ANOMALY_05000353 (1)
+#define ANOMALY_05000386 (1)
+#define ANOMALY_05000412 (0)
+#define ANOMALY_05000432 (0)
+#define ANOMALY_05000435 (0)
 
 #endif
diff --git a/include/asm-blackfin/mach-bf537/anomaly.h b/include/asm-blackfin/mach-bf537/anomaly.h
index 8d7f305..9cb3912 100644
--- a/include/asm-blackfin/mach-bf537/anomaly.h
+++ b/include/asm-blackfin/mach-bf537/anomaly.h
@@ -7,7 +7,7 @@
  */
 
 /* This file shoule be up to date with:
- *  - Revision C, 02/08/2008; ADSP-BF534/ADSP-BF536/ADSP-BF537 Blackfin Processor Anomaly List
+ *  - Revision D, 09/18/2008; ADSP-BF534/ADSP-BF536/ADSP-BF537 Blackfin Processor Anomaly List
  */
 
 #ifndef _MACH_ANOMALY_H_
@@ -148,6 +148,14 @@
 #define ANOMALY_05000402 (__SILICON_REVISION__ >= 5)
 /* Level-Sensitive External GPIO Wakeups May Cause Indefinite Stall */
 #define ANOMALY_05000403 (1)
+/* Speculative Fetches Can Cause Undesired External FIFO Operations */
+#define ANOMALY_05000416 (1)
+/* Multichannel SPORT Channel Misalignment Under Specific Configuration */
+#define ANOMALY_05000425 (1)
+/* Speculative Fetches of Indirect-Pointer Instructions Can Cause False Hardware Errors */
+#define ANOMALY_05000426 (1)
+/* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */
+#define ANOMALY_05000443 (1)
 
 /* Anomalies that don't exist on this proc */
 #define ANOMALY_05000125 (0)
@@ -160,5 +168,9 @@
 #define ANOMALY_05000323 (0)
 #define ANOMALY_05000353 (1)
 #define ANOMALY_05000363 (0)
+#define ANOMALY_05000386 (1)
+#define ANOMALY_05000412 (0)
+#define ANOMALY_05000432 (0)
+#define ANOMALY_05000435 (0)
 
 #endif
diff --git a/include/asm-blackfin/mach-bf548/anomaly.h b/include/asm-blackfin/mach-bf548/anomaly.h
index 1dc75ef..3b54309 100644
--- a/include/asm-blackfin/mach-bf548/anomaly.h
+++ b/include/asm-blackfin/mach-bf548/anomaly.h
@@ -7,7 +7,7 @@
  */
 
 /* This file shoule be up to date with:
- *  - Revision F, 06/11/2008; ADSP-BF542/BF544/BF547/BF548/BF549 Blackfin Processor Anomaly List
+ *  - Revision G, 08/07/2008; ADSP-BF542/BF544/BF547/BF548/BF549 Blackfin Processor Anomaly List
  */
 
 #ifndef _MACH_ANOMALY_H_
@@ -36,7 +36,7 @@
 /* TWI Slave Boot Mode Is Not Functional */
 #define ANOMALY_05000324 (__SILICON_REVISION__ < 1)
 /* External FIFO Boot Mode Is Not Functional */
-#define ANOMALY_05000325 (__SILICON_REVISION__ < 1)
+#define ANOMALY_05000325 (__SILICON_REVISION__ < 2)
 /* Data Lost When Core and DMA Accesses Are Made to the USB FIFO Simultaneously */
 #define ANOMALY_05000327 (__SILICON_REVISION__ < 1)
 /* Incorrect Access of OTP_STATUS During otp_write() Function */
@@ -61,6 +61,8 @@
 #define ANOMALY_05000344 (__SILICON_REVISION__ < 1)
 /* USB Calibration Value Is Not Intialized */
 #define ANOMALY_05000346 (__SILICON_REVISION__ < 1)
+/* USB Calibration Value to use */
+#define ANOMALY_05000346_value 0x5411
 /* Preboot Routine Incorrectly Alters Reset Value of USB Register */
 #define ANOMALY_05000347 (__SILICON_REVISION__ < 1)
 /* Data Lost when Core Reads SDH Data FIFO */
@@ -68,7 +70,7 @@
 /* PLL Status Register Is Inaccurate */
 #define ANOMALY_05000351 (__SILICON_REVISION__ < 1)
 /* bfrom_SysControl() Firmware Function Performs Improper System Reset */
-#define ANOMALY_05000353 (1)
+#define ANOMALY_05000353 (__SILICON_REVISION__ < 2)
 /* Regulator Programming Blocked when Hibernate Wakeup Source Remains Active */
 #define ANOMALY_05000355 (__SILICON_REVISION__ < 1)
 /* System Stalled During A Core Access To AMC While A Core Access To NFC FIFO Is Required */
@@ -86,13 +88,13 @@
 /* Default PLL MSEL and SSEL Settings Can Cause 400MHz Product To Violate Specifications */
 #define ANOMALY_05000370 (__SILICON_REVISION__ < 1)
 /* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */
-#define ANOMALY_05000371 (1)
+#define ANOMALY_05000371 (__SILICON_REVISION__ < 2)
 /* USB DP/DM Data Pins May Lose State When Entering Hibernate */
 #define ANOMALY_05000372 (__SILICON_REVISION__ < 1)
 /* Mobile DDR Operation Not Functional */
 #define ANOMALY_05000377 (1)
 /* Security/Authentication Speedpath Causes Authentication To Fail To Initiate */
-#define ANOMALY_05000378 (1)
+#define ANOMALY_05000378 (__SILICON_REVISION__ < 2)
 /* 16-Bit NAND FLASH Boot Mode Is Not Functional */
 #define ANOMALY_05000379 (1)
 /* 8-Bit NAND Flash Boot Mode Not Functional */
@@ -126,25 +128,37 @@
 /* BK_ONES, BK_ZEROS, and BK_DATECODE Constants Not Functional */
 #define ANOMALY_05000397 (__SILICON_REVISION__ < 1)
 /* Lockbox SESR Disallows Certain User Interrupts */
-#define ANOMALY_05000404 (1)
+#define ANOMALY_05000404 (__SILICON_REVISION__ < 2)
 /* Lockbox SESR Firmware Does Not Save/Restore Full Context */
 #define ANOMALY_05000405 (1)
 /* Lockbox SESR Argument Checking Does Not Check L2 Memory Protection Range */
-#define ANOMALY_05000406 (1)
+#define ANOMALY_05000406 (__SILICON_REVISION__ < 2)
 /* Lockbox SESR Firmware Arguments Are Not Retained After First Initialization */
-#define ANOMALY_05000407 (1)
+#define ANOMALY_05000407 (__SILICON_REVISION__ < 2)
 /* Lockbox Firmware Memory Cleanup Routine Does not Clear Registers */
 #define ANOMALY_05000408 (1)
 /* Lockbox firmware leaves MDMA0 channel enabled */
-#define ANOMALY_05000409 (1)
+#define ANOMALY_05000409 (__SILICON_REVISION__ < 2)
 /* bfrom_SysControl() Firmware Function Cannot be Used to Enter Power Saving Modes */
-#define ANOMALY_05000411 (1)
-/* FIFO Boot Mode Is Not Functional */
-#define ANOMALY_05000412 (1)
+#define ANOMALY_05000411 (__SILICON_REVISION__ < 2)
 /* NAND Boot Mode Not Compatible With Some NAND Flash Devices */
-#define ANOMALY_05000413 (1)
+#define ANOMALY_05000413 (__SILICON_REVISION__ < 2)
 /* OTP_CHECK_FOR_PREV_WRITE Bit is Not Functional in bfrom_OtpWrite() API */
-#define ANOMALY_05000414 (1)
+#define ANOMALY_05000414 (__SILICON_REVISION__ < 2)
+/* Speculative Fetches Can Cause Undesired External FIFO Operations */
+#define ANOMALY_05000416 (1)
+/* Multichannel SPORT Channel Misalignment Under Specific Configuration */
+#define ANOMALY_05000425 (1)
+/* Speculative Fetches of Indirect-Pointer Instructions Can Cause Spurious Hardware Errors */
+#define ANOMALY_05000426 (1)
+/* CORE_EPPI_PRIO bit and SYS_EPPI_PRIO bit in the HMDMA1_CONTROL register are not functional */
+#define ANOMALY_05000427 (__SILICON_REVISION__ < 2)
+/* WB_EDGE Bit in NFC_IRQSTAT Incorrectly Behaves as a Buffer Status Bit Instead of an IRQ Status Bit */
+#define ANOMALY_05000429 (__SILICON_REVISION__ < 2)
+/* Software System Reset Corrupts PLL_LOCKCNT Register */
+#define ANOMALY_05000430 (__SILICON_REVISION__ >= 2)
+/* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */
+#define ANOMALY_05000443 (1)
 
 /* Anomalies that don't exist on this proc */
 #define ANOMALY_05000125 (0)
@@ -161,5 +175,8 @@
 #define ANOMALY_05000311 (0)
 #define ANOMALY_05000323 (0)
 #define ANOMALY_05000363 (0)
+#define ANOMALY_05000412 (0)
+#define ANOMALY_05000432 (0)
+#define ANOMALY_05000435 (0)
 
 #endif
diff --git a/include/asm-blackfin/mach-bf561/anomaly.h b/include/asm-blackfin/mach-bf561/anomaly.h
index e9c4ca8..1a9e175 100644
--- a/include/asm-blackfin/mach-bf561/anomaly.h
+++ b/include/asm-blackfin/mach-bf561/anomaly.h
@@ -7,7 +7,7 @@
  */
 
 /* This file shoule be up to date with:
- *  - Revision P, 02/08/2008; ADSP-BF561 Blackfin Processor Anomaly List
+ *  - Revision Q, 11/07/2008; ADSP-BF561 Blackfin Processor Anomaly List
  */
 
 #ifndef _MACH_ANOMALY_H_
@@ -264,6 +264,18 @@
 #define ANOMALY_05000371 (1)
 /* Level-Sensitive External GPIO Wakeups May Cause Indefinite Stall */
 #define ANOMALY_05000403 (1)
+/* TESTSET Instruction Causes Data Corruption with Writeback Data Cache Enabled */
+#define ANOMALY_05000412 (1)
+/* Speculative Fetches Can Cause Undesired External FIFO Operations */
+#define ANOMALY_05000416 (1)
+/* Multichannel SPORT Channel Misalignment Under Specific Configuration */
+#define ANOMALY_05000425 (1)
+/* Speculative Fetches of Indirect-Pointer Instructions Can Cause False Hardware Errors */
+#define ANOMALY_05000426 (1)
+/* Lost/Corrupted L2/L3 Memory Write after Speculative L2 Memory Read by Core B */
+#define ANOMALY_05000428 (__SILICON_REVISION__ > 3)
+/* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */
+#define ANOMALY_05000443 (1)
 
 /* Anomalies that don't exist on this proc */
 #define ANOMALY_05000158 (0)
@@ -271,5 +283,8 @@
 #define ANOMALY_05000273 (0)
 #define ANOMALY_05000311 (0)
 #define ANOMALY_05000353 (1)
+#define ANOMALY_05000386 (1)
+#define ANOMALY_05000432 (0)
+#define ANOMALY_05000435 (0)
 
 #endif