ENGR00122085 MX35 Add Uboot Firmware support

Build Mfg firmware for mx35 3stack

Signed-off-by: Wallace Wang <r59996@freescale.com>

3 files changed, 253 insertions, 0 deletions

diff --git a/Makefile b/Makefile
index eeb958a..fc90ef7 100644
--- a/Makefile
+++ b/Makefile
@@ -3242,6 +3242,7 @@ mx31_3stack_config	: unconfig
 	@$(MKCONFIG) $(@:_config=) arm arm1136 mx31_3stack freescale mx31
 
 mx35_3stack_config      \
+mx35_3stack_mfg_config \
 mx35_3stack_mmc_config: unconfig
 	@$(MKCONFIG) $(@:_config=) arm arm1136 mx35_3stack freescale mx35
 
diff --git a/board/freescale/mx35_3stack/mx35_3stack.c b/board/freescale/mx35_3stack/mx35_3stack.c
index 4da8f25..c3c9683 100644
--- a/board/freescale/mx35_3stack/mx35_3stack.c
+++ b/board/freescale/mx35_3stack/mx35_3stack.c
@@ -149,6 +149,14 @@ int board_init(void)
 {
 	int pad;
 
+#ifdef CONFIG_MFG
+/* MFG firmware need reset usb to avoid host crash firstly */
+#define USBCMD 0x53FF4140
+	int val = readl(USBCMD);
+	val &= ~0x1; /*RS bit*/
+	writel(val, USBCMD);
+#endif
+
 	setup_soc_rev();
 
 	/* enable clocks */
diff --git a/include/configs/mx35_3stack_mfg.h b/include/configs/mx35_3stack_mfg.h
new file mode 100644
index 0000000..42b5909
--- /dev/null
+++ b/include/configs/mx35_3stack_mfg.h
@@ -0,0 +1,244 @@
+/*
+ * Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de>
+ *
+ * (C) Copyright 2008-2010 Freescale Semiconductor, Inc.
+ *
+ * Configuration settings for the MX35 3stack Freescale board.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <asm/arch/mx35.h>
+
+ /* High Level Configuration Options */
+#define CONFIG_ARM1136		1	/* This is an arm1136 CPU core */
+#define CONFIG_MXC		1
+#define CONFIG_MX35		1	/* in a mx31 */
+#define CONFIG_MX35_HCLK_FREQ	24000000	/* RedBoot says 26MHz */
+#define CONFIG_MFG              1
+
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+
+#define BOARD_LATE_INIT
+/*
+ * Disabled for now due to build problems under Debian and a significant
+ * increase in the final file size: 144260 vs. 109536 Bytes.
+ */
+#if 0
+#define CONFIG_OF_LIBFDT		1
+#define CONFIG_FIT			1
+#define CONFIG_FIT_VERBOSE		1
+#endif
+
+#define CONFIG_CMDLINE_TAG		1	/* enable passing of ATAGs */
+#define CONFIG_REVISION_TAG		1
+#define CONFIG_SETUP_MEMORY_TAGS	1
+#define CONFIG_INITRD_TAG		1
+
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 512 * 1024)
+#define CONFIG_SYS_GBL_DATA_SIZE	128 /* size in bytes reserved for initial data */
+
+/*
+ * Hardware drivers
+ */
+#define CONFIG_HARD_I2C		1
+#define CONFIG_I2C_MXC		1
+#define CONFIG_SYS_I2C_PORT		I2C_BASE_ADDR
+#define CONFIG_SYS_I2C_SPEED		100000
+#define CONFIG_SYS_I2C_SLAVE		0xfe
+
+#define CONFIG_MX35_UART	UART1_BASE_ADDR
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_CONS_INDEX	1
+#define CONFIG_BAUDRATE		115200
+#define CONFIG_SYS_BAUDRATE_TABLE	{9600, 19200, 38400, 57600, 115200}
+
+/***********************************************************
+ * Command definition
+ ***********************************************************/
+
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
+/*#define CONFIG_CMD_SPI*/
+/*#define CONFIG_CMD_DATE*/
+#define CONFIG_CMD_NAND
+#define CONFIG_MXC_NAND
+
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+#define CONFIG_NET_RETRY_COUNT	100
+
+#define CONFIG_BOOTDELAY	0
+
+#define CONFIG_LOADADDR		0x80100000	/* loadaddr env var */
+
+#define CONFIG_BOOTARGS         "console=ttymxc0,115200 "\
+				"rdinit=/linuxrc"
+
+#define CONFIG_BOOTCOMMAND      "bootm ${loadaddr}  0x80800000"
+
+#define CONFIG_ENV_IS_EMBEDDED
+
+#define	CONFIG_EXTRA_ENV_SETTINGS					\
+		"netdev=eth0\0"						\
+		"ethprime=smc911x\0"					\
+		"uboot_addr=0xa0000000\0"				\
+		"uboot=u-boot.bin\0"			\
+		"kernel=uImage\0"				\
+		"nfsroot=/opt/eldk/arm\0"				\
+		"bootargs_base=setenv bootargs console=ttymxc0,115200\0"\
+		"bootargs_nfs=setenv bootargs ${bootargs} root=/dev/nfs "\
+			"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0"\
+		"bootcmd=run bootcmd_net\0"				\
+		"bootcmd_net=run bootargs_base bootargs_nfs; "		\
+			"tftpboot ${loadaddr} ${kernel}; bootm\0"	\
+		"prg_uboot=tftpboot ${loadaddr} ${uboot}; "		\
+			"protect off ${uboot_addr} 0xa003ffff; "	\
+			"erase ${uboot_addr} 0xa003ffff; "		\
+			"cp.b ${loadaddr} ${uboot_addr} ${filesize}; "	\
+			"setenv filesize; saveenv\0"
+
+/*Support LAN9217*/
+#define CONFIG_SMC911X		1
+#define CONFIG_SMC911X_16_BIT 1
+#define CONFIG_SMC911X_BASE CS5_BASE_ADDR
+
+#define CONFIG_HAS_ETH1
+#define CONFIG_NET_MULTI 1
+#define CONFIG_ETHPRIME
+#define CONFIG_MXC_FEC
+#define CONFIG_MII
+#define CONFIG_DISCOVER_PHY
+
+#define CONFIG_FEC0_IOBASE FEC_BASE_ADDR
+#define CONFIG_FEC0_PINMUX	-1
+#define CONFIG_FEC0_PHY_ADDR	0x1F
+#define CONFIG_FEC0_MIIBASE -1
+
+/*
+ * The MX31ADS board seems to have a hardware "peculiarity" confirmed under
+ * U-Boot, RedBoot and Linux: the ethernet Rx signal is reaching the CS8900A
+ * controller inverted. The controller is capable of detecting and correcting
+ * this, but it needs 4 network packets for that. Which means, at startup, you
+ * will not receive answers to the first 4 packest, unless there have been some
+ * broadcasts on the network, or your board is on a hub. Reducing the ARP
+ * timeout from default 5 seconds to 200ms we speed up the initial TFTP
+ * transfer, should the user wish one, significantly.
+ */
+#define CONFIG_ARP_TIMEOUT	200UL
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_LONGHELP	/* undef to save memory */
+#define CONFIG_SYS_PROMPT	"MX35 U-Boot > "
+#define CONFIG_ARCH_CPU_INIT
+#define CONFIG_ARCH_MMU
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_SYS_CBSIZE	256	/* Console I/O Buffer Size */
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS	16	/* max number of command args */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
+
+#define CONFIG_SYS_MEMTEST_START	0	/* memtest works on */
+#define CONFIG_SYS_MEMTEST_END		0x10000
+
+#undef	CONFIG_SYS_CLKS_IN_HZ	/* everything, incl board info, in Hz */
+
+#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
+
+#define CONFIG_SYS_HZ				1000
+
+#define CONFIG_CMDLINE_EDITING	1
+
+/*-----------------------------------------------------------------------
+ * Stack sizes
+ *
+ * The stack sizes are set up in start.S using the settings below
+ */
+#define CONFIG_STACKSIZE	(128 * 1024)	/* regular stack */
+
+/*-----------------------------------------------------------------------
+ * Physical Memory Map
+ */
+#define CONFIG_NR_DRAM_BANKS	1
+#define PHYS_SDRAM_1		CSD0_BASE_ADDR
+#define PHYS_SDRAM_1_SIZE	(128 * 1024 * 1024)
+
+/*-----------------------------------------------------------------------
+ * FLASH and environment organization
+ */
+#define CONFIG_SYS_FLASH_BASE		CS0_BASE_ADDR
+#define CONFIG_SYS_MAX_FLASH_BANKS 1	/* max number of memory banks */
+#define CONFIG_SYS_MAX_FLASH_SECT 512	/* max number of sectors on one chip */
+/* Monitor at beginning of flash */
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_MONITOR_LEN		(512 * 1024)	/* Reserve 256KiB */
+
+#define CONFIG_ENV_SECT_SIZE	(128 * 1024)
+#define CONFIG_ENV_SIZE		CONFIG_ENV_SECT_SIZE
+
+/* Address and size of Redundant Environment Sector	*/
+#define CONFIG_ENV_OFFSET_REDUND (2 * 1024 * 1024)
+#define CONFIG_ENV_SIZE_REDUND	CONFIG_ENV_SIZE
+
+#define CONFIG_ENV_IS_NOWHERE
+
+/*
+ * S29WS256N NOR flash has 4 32KiB small sectors at the beginning and at the
+ * end. The rest of 32MiB is in 128KiB big sectors. U-Boot occupies the low
+ * 4 sectors, if we put environment next to it, we will have to occupy 128KiB
+ * for it. Putting it at the top of flash we use only 32KiB.
+ */
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE + CONFIG_ENV_SECT_SIZE)
+
+
+/*-----------------------------------------------------------------------
+ * CFI FLASH driver setup
+ */
+#define CONFIG_SYS_FLASH_CFI		1/* Flash memory is CFI compliant */
+#define CONFIG_FLASH_CFI_DRIVER		1/* Use drivers/cfi_flash.c */
+/* A non-standard buffered write algorithm */
+#define CONFIG_FLASH_SPANSION_S29WS_N	1
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1/* Use buffered writes (~10x faster) */
+#define CONFIG_SYS_FLASH_PROTECTION	1/* Use hardware sector protection */
+
+/*-----------------------------------------------------------------------
+ * NAND FLASH driver setup
+ */
+#define NAND_MAX_CHIPS         1
+#define CONFIG_SYS_MAX_NAND_DEVICE    1
+#define CONFIG_SYS_NAND_BASE          0x40000000
+/*
+ * JFFS2 partitions
+ */
+#undef CONFIG_JFFS2_CMDLINE
+#define CONFIG_JFFS2_DEV	"nor0"
+
+#endif				/* __CONFIG_H */