avr32: Rework SDRAM initialization code

This cleans up the SDRAM initialization and related code a bit, and
allows faster booting.

  * Add definitions for EBI and internal SRAM to asm/arch/memory-map.h
  * Remove memory test from sdram_init() and make caller responsible
    for verifying the SDRAM and determining its size.
  * Remove base_address member from struct sdram_config (was sdram_info)
  * Add data_bits member to struct sdram_config and kill CFG_SDRAM_16BIT
  * Add support for a common STK1000 hack: 16MB SDRAM instead of 8.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>

10 files changed, 166 insertions, 120 deletions

diff --git a/board/atmel/atngw100/atngw100.c b/board/atmel/atngw100/atngw100.c
index 3ff6f0f..c649855 100644
--- a/board/atmel/atngw100/atngw100.c
+++ b/board/atmel/atngw100/atngw100.c
@@ -29,8 +29,8 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-static const struct sdram_info sdram = {
-	.phys_addr	= CFG_SDRAM_BASE,
+static const struct sdram_config sdram_config = {
+	.data_bits	= SDRAM_DATA_16BIT,
 	.row_bits	= 13,
 	.col_bits	= 9,
 	.bank_bits	= 2,
@@ -66,7 +66,22 @@ int board_early_init_f(void)
 
 long int initdram(int board_type)
 {
-	return sdram_init(&sdram);
+	unsigned long expected_size;
+	unsigned long actual_size;
+	void *sdram_base;
+
+	sdram_base = map_physmem(EBI_SDRAM_BASE, EBI_SDRAM_SIZE, MAP_NOCACHE);
+
+	expected_size = sdram_init(sdram_base, &sdram_config);
+	actual_size = get_ram_size(sdram_base, expected_size);
+
+	unmap_physmem(sdram_base, EBI_SDRAM_SIZE);
+
+	if (expected_size != actual_size)
+		printf("Warning: Only %u of %u MiB SDRAM is working\n",
+				actual_size >> 20, expected_size >> 20);
+
+	return actual_size;
 }
 
 void board_init_info(void)
diff --git a/board/atmel/atstk1000/atstk1000.c b/board/atmel/atstk1000/atstk1000.c
index 52fec65..33bdba6 100644
--- a/board/atmel/atstk1000/atstk1000.c
+++ b/board/atmel/atstk1000/atstk1000.c
@@ -29,10 +29,10 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#ifdef CONFIG_ATSTK1006
-/* Dual MT48LC16M16A2-7E on daughterboard */
-static const struct sdram_info sdram = {
-	.phys_addr	= CFG_SDRAM_BASE,
+static const struct sdram_config sdram_config = {
+#if defined(CONFIG_ATSTK1006)
+	/* Dual MT48LC16M16A2-7E (64 MB) on daughterboard */
+	.data_bits	= SDRAM_DATA_32BIT,
 	.row_bits	= 13,
 	.col_bits	= 9,
 	.bank_bits	= 2,
@@ -45,12 +45,19 @@ static const struct sdram_info sdram = {
 	.txsr		= 7,
 	/* 7.81 us */
 	.refresh_period	= (781 * (SDRAMC_BUS_HZ / 1000)) / 100000,
-};
 #else
-/* MT48LC2M32B2-5 on motherboard */
-static const struct sdram_info sdram = {
-	.phys_addr	= CFG_SDRAM_BASE,
+	/* MT48LC2M32B2P-5 (8 MB) on motherboard */
+#ifdef CONFIG_ATSTK1004
+	.data_bits	= SDRAM_DATA_16BIT,
+#else
+	.data_bits	= SDRAM_DATA_32BIT,
+#endif
+#ifdef CONFIG_ATSTK1000_16MB_SDRAM
+	/* MT48LC4M32B2P-6 (16 MB) on mod'ed motherboard */
+	.row_bits	= 12,
+#else
 	.row_bits	= 11,
+#endif
 	.col_bits	= 8,
 	.bank_bits	= 2,
 	.cas		= 3,
@@ -62,8 +69,8 @@ static const struct sdram_info sdram = {
 	.txsr		= 5,
 	/* 15.6 us */
 	.refresh_period	= (156 * (SDRAMC_BUS_HZ / 1000)) / 10000,
-};
 #endif
+};
 
 int board_early_init_f(void)
 {
@@ -85,7 +92,22 @@ int board_early_init_f(void)
 
 long int initdram(int board_type)
 {
-	return sdram_init(&sdram);
+	unsigned long expected_size;
+	unsigned long actual_size;
+	void *sdram_base;
+
+	sdram_base = map_physmem(EBI_SDRAM_BASE, EBI_SDRAM_SIZE, MAP_NOCACHE);
+
+	expected_size = sdram_init(sdram_base, &sdram_config);
+	actual_size = get_ram_size(sdram_base, expected_size);
+
+	unmap_physmem(sdram_base, EBI_SDRAM_SIZE);
+
+	if (expected_size != actual_size)
+		printf("Warning: Only %u of %u MiB SDRAM is working\n",
+				actual_size >> 20, expected_size >> 20);
+
+	return actual_size;
 }
 
 void board_init_info(void)
diff --git a/cpu/at32ap/hsdramc.c b/cpu/at32ap/hsdramc.c
index 1fcfe75..992612b 100644
--- a/cpu/at32ap/hsdramc.c
+++ b/cpu/at32ap/hsdramc.c
@@ -30,39 +30,32 @@
 
 #include "hsdramc1.h"
 
-unsigned long sdram_init(const struct sdram_info *info)
+unsigned long sdram_init(void *sdram_base, const struct sdram_config *config)
 {
-	unsigned long *sdram = (unsigned long *)uncached(info->phys_addr);
 	unsigned long sdram_size;
-	unsigned long tmp;
-	unsigned long bus_hz;
+	uint32_t cfgreg;
 	unsigned int i;
 
-	if (!info->refresh_period)
-		panic("ERROR: SDRAM refresh period == 0. "
-				"Please update the board code\n");
-
-	tmp = (HSDRAMC1_BF(NC, info->col_bits - 8)
-	       | HSDRAMC1_BF(NR, info->row_bits - 11)
-	       | HSDRAMC1_BF(NB, info->bank_bits - 1)
-	       | HSDRAMC1_BF(CAS, info->cas)
-	       | HSDRAMC1_BF(TWR, info->twr)
-	       | HSDRAMC1_BF(TRC, info->trc)
-	       | HSDRAMC1_BF(TRP, info->trp)
-	       | HSDRAMC1_BF(TRCD, info->trcd)
-	       | HSDRAMC1_BF(TRAS, info->tras)
-	       | HSDRAMC1_BF(TXSR, info->txsr));
-
-#ifdef CFG_SDRAM_16BIT
-	tmp |= HSDRAMC1_BIT(DBW);
-	sdram_size = 1 << (info->row_bits + info->col_bits
-			   + info->bank_bits + 1);
-#else
-	sdram_size = 1 << (info->row_bits + info->col_bits
-			   + info->bank_bits + 2);
-#endif
-
-	hsdramc1_writel(CR, tmp);
+	cfgreg = (HSDRAMC1_BF(NC, config->col_bits - 8)
+		       | HSDRAMC1_BF(NR, config->row_bits - 11)
+		       | HSDRAMC1_BF(NB, config->bank_bits - 1)
+		       | HSDRAMC1_BF(CAS, config->cas)
+		       | HSDRAMC1_BF(TWR, config->twr)
+		       | HSDRAMC1_BF(TRC, config->trc)
+		       | HSDRAMC1_BF(TRP, config->trp)
+		       | HSDRAMC1_BF(TRCD, config->trcd)
+		       | HSDRAMC1_BF(TRAS, config->tras)
+		       | HSDRAMC1_BF(TXSR, config->txsr));
+
+	if (config->data_bits == SDRAM_DATA_16BIT)
+		cfgreg |= HSDRAMC1_BIT(DBW);
+
+	hsdramc1_writel(CR, cfgreg);
+
+	/* Send a NOP to turn on the clock (necessary on some chips) */
+	hsdramc1_writel(MR, HSDRAMC1_MODE_NOP);
+	hsdramc1_readl(MR);
+	writel(0, sdram_base);
 
 	/*
 	 * Initialization sequence for SDRAM, from the data sheet:
@@ -77,7 +70,7 @@ unsigned long sdram_init(const struct sdram_info *info)
 	 */
 	hsdramc1_writel(MR, HSDRAMC1_MODE_BANKS_PRECHARGE);
 	hsdramc1_readl(MR);
-	writel(0, sdram);
+	writel(0, sdram_base);
 
 	/*
 	 * 3. Eight auto-refresh (CBR) cycles are provided
@@ -85,58 +78,41 @@ unsigned long sdram_init(const struct sdram_info *info)
 	hsdramc1_writel(MR, HSDRAMC1_MODE_AUTO_REFRESH);
 	hsdramc1_readl(MR);
 	for (i = 0; i < 8; i++)
-		writel(0, sdram);
+		writel(0, sdram_base);
 
 	/*
 	 * 4. A mode register set (MRS) cycle is issued to program
 	 *    SDRAM parameters, in particular CAS latency and burst
 	 *    length.
 	 *
-	 * CAS from info struct, burst length 1, serial burst type
+	 * The address will be chosen by the SDRAMC automatically; we
+	 * just have to make sure BA[1:0] are set to 0.
 	 */
 	hsdramc1_writel(MR, HSDRAMC1_MODE_LOAD_MODE);
 	hsdramc1_readl(MR);
-	writel(0, sdram + (info->cas << 4));
+	writel(0, sdram_base);
 
 	/*
-	 * 5. A Normal Mode command is provided, 3 clocks after tMRD
-	 *    is met.
-	 *
-	 * From the timing diagram, it looks like tMRD is 3
-	 * cycles...try a dummy read from the peripheral bus.
+	 * 5. The application must go into Normal Mode, setting Mode
+	 *    to 0 in the Mode Register and performing a write access
+	 *    at any location in the SDRAM.
 	 */
-	hsdramc1_readl(MR);
 	hsdramc1_writel(MR, HSDRAMC1_MODE_NORMAL);
 	hsdramc1_readl(MR);
-	writel(0, sdram);
+	writel(0, sdram_base);
 
 	/*
 	 * 6. Write refresh rate into SDRAMC refresh timer count
 	 *    register (refresh rate = timing between refresh cycles).
-	 *
-	 * 15.6 us is a typical value for a burst of length one
 	 */
-	bus_hz = get_sdram_clk_rate();
-	hsdramc1_writel(TR, info->refresh_period);
-
-	printf("SDRAM: %u MB at address 0x%08lx\n",
-	       sdram_size >> 20, info->phys_addr);
-
-	printf("Testing SDRAM...");
-	for (i = 0; i < sdram_size / 4; i++)
-		sdram[i] = i;
-
-	for (i = 0; i < sdram_size / 4; i++) {
-		tmp = sdram[i];
-		if (tmp != i) {
-			printf("FAILED at address 0x%08lx\n",
-			       info->phys_addr + i * 4);
-			printf("SDRAM: read 0x%lx, expected 0x%lx\n", tmp, i);
-			return 0;
-		}
-	}
-
-	puts("OK\n");
+	hsdramc1_writel(TR, config->refresh_period);
+
+	if (config->data_bits == SDRAM_DATA_16BIT)
+		sdram_size = 1 << (config->row_bits + config->col_bits
+				   + config->bank_bits + 1);
+	else
+		sdram_size = 1 << (config->row_bits + config->col_bits
+				   + config->bank_bits + 2);
 
 	return sdram_size;
 }
diff --git a/include/asm-avr32/arch-at32ap700x/memory-map.h b/include/asm-avr32/arch-at32ap700x/memory-map.h
index 5513e88..6592c03 100644
--- a/include/asm-avr32/arch-at32ap700x/memory-map.h
+++ b/include/asm-avr32/arch-at32ap700x/memory-map.h
@@ -22,6 +22,26 @@
 #ifndef __AT32AP7000_MEMORY_MAP_H__
 #define __AT32AP7000_MEMORY_MAP_H__
 
+/* Internal and external memories */
+#define EBI_SRAM_CS0_BASE			0x00000000
+#define EBI_SRAM_CS0_SIZE			0x04000000
+#define EBI_SRAM_CS4_BASE			0x04000000
+#define EBI_SRAM_CS4_SIZE			0x04000000
+#define EBI_SRAM_CS2_BASE			0x08000000
+#define EBI_SRAM_CS2_SIZE			0x04000000
+#define EBI_SRAM_CS3_BASE			0x0c000000
+#define EBI_SRAM_CS3_SIZE			0x04000000
+#define EBI_SRAM_CS1_BASE			0x10000000
+#define EBI_SRAM_CS1_SIZE			0x10000000
+#define EBI_SRAM_CS5_BASE			0x20000000
+#define EBI_SRAM_CS5_SIZE			0x04000000
+
+#define EBI_SDRAM_BASE				EBI_SRAM_CS1_BASE
+#define EBI_SDRAM_SIZE				EBI_SRAM_CS1_SIZE
+
+#define INTERNAL_SRAM_BASE			0x24000000
+#define INTERNAL_SRAM_SIZE			0x00008000
+
 /* Devices on the High Speed Bus (HSB) */
 #define LCDC_BASE				0xFF000000
 #define DMAC_BASE				0xFF200000
diff --git a/include/asm-avr32/sdram.h b/include/asm-avr32/sdram.h
index 833af6e..7bdefc1 100644
--- a/include/asm-avr32/sdram.h
+++ b/include/asm-avr32/sdram.h
@@ -22,15 +22,32 @@
 #ifndef __ASM_AVR32_SDRAM_H
 #define __ASM_AVR32_SDRAM_H
 
-struct sdram_info {
-	unsigned long phys_addr;
-	unsigned int row_bits, col_bits, bank_bits;
-	unsigned int cas, twr, trc, trp, trcd, tras, txsr;
+struct sdram_config {
+	/* Number of data bits. */
+	enum {
+		SDRAM_DATA_16BIT,
+		SDRAM_DATA_32BIT,
+	} data_bits;
+
+	/* Number of address bits */
+	uint8_t row_bits, col_bits, bank_bits;
+
+	/* SDRAM timings in cycles */
+	uint8_t cas, twr, trc, trp, trcd, tras, txsr;
 
 	/* SDRAM refresh period in cycles */
 	unsigned long refresh_period;
 };
 
-extern unsigned long sdram_init(const struct sdram_info *info);
+/*
+ * Attempt to initialize the SDRAM controller using the specified
+ * parameters. Return the expected size of the memory area based on
+ * the number of address and data bits.
+ *
+ * The caller should verify that the configuration is correct by
+ * running a memory test, e.g. get_ram_size().
+ */
+extern unsigned long sdram_init(void *sdram_base,
+			const struct sdram_config *config);
 
 #endif /* __ASM_AVR32_SDRAM_H */
diff --git a/include/configs/atngw100.h b/include/configs/atngw100.h
index 313298a..3fc9975 100644
--- a/include/configs/atngw100.h
+++ b/include/configs/atngw100.h
@@ -24,6 +24,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#include <asm/arch/memory-map.h>
+
 #define CONFIG_AVR32			1
 #define CONFIG_AT32AP			1
 #define CONFIG_AT32AP7000		1
@@ -140,11 +142,9 @@
 
 #define CFG_MONITOR_BASE		CFG_FLASH_BASE
 
-#define CFG_INTRAM_BASE			0x24000000
-#define CFG_INTRAM_SIZE			0x8000
-
-#define CFG_SDRAM_BASE			0x10000000
-#define CFG_SDRAM_16BIT			1
+#define CFG_INTRAM_BASE			INTERNAL_SRAM_BASE
+#define CFG_INTRAM_SIZE			INTERNAL_SRAM_SIZE
+#define CFG_SDRAM_BASE			EBI_SDRAM_BASE
 
 #define CFG_ENV_IS_IN_FLASH		1
 #define CFG_ENV_SIZE			65536
@@ -153,17 +153,10 @@
 #define CFG_INIT_SP_ADDR		(CFG_INTRAM_BASE + CFG_INTRAM_SIZE)
 
 #define CFG_MALLOC_LEN			(256*1024)
-#define CFG_MALLOC_END							\
-	({								\
-		DECLARE_GLOBAL_DATA_PTR;				\
-		CFG_SDRAM_BASE + gd->sdram_size;			\
-	})
-#define CFG_MALLOC_START		(CFG_MALLOC_END - CFG_MALLOC_LEN)
-
 #define CFG_DMA_ALLOC_LEN		(16384)
 
 /* Allow 4MB for the kernel run-time image */
-#define CFG_LOAD_ADDR			(CFG_SDRAM_BASE + 0x00400000)
+#define CFG_LOAD_ADDR			(EBI_SDRAM_BASE + 0x00400000)
 #define CFG_BOOTPARAMS_LEN		(16 * 1024)
 
 /* Other configuration settings that shouldn't have to change all that often */
@@ -173,7 +166,7 @@
 #define CFG_PBSIZE			(CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
 #define CFG_LONGHELP			1
 
-#define CFG_MEMTEST_START		CFG_SDRAM_BASE
+#define CFG_MEMTEST_START		EBI_SDRAM_BASE
 #define CFG_MEMTEST_END			(CFG_MEMTEST_START + 0x1f00000)
 
 #define CFG_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 }
diff --git a/include/configs/atstk1002.h b/include/configs/atstk1002.h
index f652b28..ba18eb6 100644
--- a/include/configs/atstk1002.h
+++ b/include/configs/atstk1002.h
@@ -24,6 +24,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#include <asm/arch/memory-map.h>
+
 #define CONFIG_AVR32			1
 #define CONFIG_AT32AP			1
 #define CONFIG_AT32AP7000		1
@@ -170,10 +172,9 @@
 
 #define CFG_MONITOR_BASE		CFG_FLASH_BASE
 
-#define CFG_INTRAM_BASE			0x24000000
-#define CFG_INTRAM_SIZE			0x8000
-
-#define CFG_SDRAM_BASE			0x10000000
+#define CFG_INTRAM_BASE			INTERNAL_SRAM_BASE
+#define CFG_INTRAM_SIZE			INTERNAL_SRAM_SIZE
+#define CFG_SDRAM_BASE			EBI_SDRAM_BASE
 
 #define CFG_ENV_IS_IN_FLASH		1
 #define CFG_ENV_SIZE			65536
@@ -185,7 +186,7 @@
 #define CFG_DMA_ALLOC_LEN		(16384)
 
 /* Allow 4MB for the kernel run-time image */
-#define CFG_LOAD_ADDR			(CFG_SDRAM_BASE + 0x00400000)
+#define CFG_LOAD_ADDR			(EBI_SDRAM_BASE + 0x00400000)
 #define CFG_BOOTPARAMS_LEN		(16 * 1024)
 
 /* Other configuration settings that shouldn't have to change all that often */
@@ -195,7 +196,7 @@
 #define CFG_PBSIZE			(CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
 #define CFG_LONGHELP			1
 
-#define CFG_MEMTEST_START		CFG_SDRAM_BASE
+#define CFG_MEMTEST_START		EBI_SDRAM_BASE
 #define CFG_MEMTEST_END			(CFG_MEMTEST_START + 0x700000)
 #define CFG_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 }
 
diff --git a/include/configs/atstk1003.h b/include/configs/atstk1003.h
index 2d981cc..a528ddf 100644
--- a/include/configs/atstk1003.h
+++ b/include/configs/atstk1003.h
@@ -24,6 +24,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#include <asm/arch/memory-map.h>
+
 #define CONFIG_AVR32			1
 #define CONFIG_AT32AP			1
 #define CONFIG_AT32AP7001		1
@@ -153,10 +155,9 @@
 
 #define CFG_MONITOR_BASE		CFG_FLASH_BASE
 
-#define CFG_INTRAM_BASE			0x24000000
-#define CFG_INTRAM_SIZE			0x8000
-
-#define CFG_SDRAM_BASE			0x10000000
+#define CFG_INTRAM_BASE			INTERNAL_SRAM_BASE
+#define CFG_INTRAM_SIZE			INTERNAL_SRAM_SIZE
+#define CFG_SDRAM_BASE			EBI_SDRAM_BASE
 
 #define CFG_ENV_IS_IN_FLASH		1
 #define CFG_ENV_SIZE			65536
@@ -167,7 +168,7 @@
 #define CFG_MALLOC_LEN			(256*1024)
 
 /* Allow 4MB for the kernel run-time image */
-#define CFG_LOAD_ADDR			(CFG_SDRAM_BASE + 0x00400000)
+#define CFG_LOAD_ADDR			(EBI_SDRAM_BASE + 0x00400000)
 #define CFG_BOOTPARAMS_LEN		(16 * 1024)
 
 /* Other configuration settings that shouldn't have to change all that often */
@@ -177,7 +178,7 @@
 #define CFG_PBSIZE			(CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
 #define CFG_LONGHELP			1
 
-#define CFG_MEMTEST_START		CFG_SDRAM_BASE
+#define CFG_MEMTEST_START		EBI_SDRAM_BASE
 #define CFG_MEMTEST_END			(CFG_MEMTEST_START + 0x700000)
 #define CFG_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 }
 
diff --git a/include/configs/atstk1004.h b/include/configs/atstk1004.h
index 235c1cc..fc9585e 100644
--- a/include/configs/atstk1004.h
+++ b/include/configs/atstk1004.h
@@ -24,6 +24,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#include <asm/arch/memory-map.h>
+
 #define CONFIG_AVR32			1
 #define CONFIG_AT32AP			1
 #define CONFIG_AT32AP7002		1
@@ -153,11 +155,9 @@
 
 #define CFG_MONITOR_BASE		CFG_FLASH_BASE
 
-#define CFG_INTRAM_BASE			0x24000000
-#define CFG_INTRAM_SIZE			0x8000
-
-#define CFG_SDRAM_BASE			0x10000000
-#define CFG_SDRAM_16BIT			1
+#define CFG_INTRAM_BASE			INTERNAL_SRAM_BASE
+#define CFG_INTRAM_SIZE			INTERNAL_SRAM_SIZE
+#define CFG_SDRAM_BASE			EBI_SDRAM_BASE
 
 #define CFG_ENV_IS_IN_FLASH		1
 #define CFG_ENV_SIZE			65536
@@ -168,7 +168,7 @@
 #define CFG_MALLOC_LEN			(256*1024)
 
 /* Allow 2MB for the kernel run-time image */
-#define CFG_LOAD_ADDR			(CFG_SDRAM_BASE + 0x00200000)
+#define CFG_LOAD_ADDR			(EBI_SDRAM_BASE + 0x00200000)
 #define CFG_BOOTPARAMS_LEN		(16 * 1024)
 
 /* Other configuration settings that shouldn't have to change all that often */
@@ -178,7 +178,7 @@
 #define CFG_PBSIZE			(CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
 #define CFG_LONGHELP			1
 
-#define CFG_MEMTEST_START		CFG_SDRAM_BASE
+#define CFG_MEMTEST_START		EBI_SDRAM_BASE
 #define CFG_MEMTEST_END			(CFG_MEMTEST_START + 0x700000)
 #define CFG_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 }
 
diff --git a/include/configs/atstk1006.h b/include/configs/atstk1006.h
index c606d5d..9fd49a5 100644
--- a/include/configs/atstk1006.h
+++ b/include/configs/atstk1006.h
@@ -24,6 +24,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#include <asm/arch/memory-map.h>
+
 #define CONFIG_AVR32			1
 #define CONFIG_AT32AP			1
 #define CONFIG_AT32AP7000		1
@@ -170,10 +172,9 @@
 
 #define CFG_MONITOR_BASE		CFG_FLASH_BASE
 
-#define CFG_INTRAM_BASE			0x24000000
-#define CFG_INTRAM_SIZE			0x8000
-
-#define CFG_SDRAM_BASE			0x10000000
+#define CFG_INTRAM_BASE			INTERNAL_SRAM_BASE
+#define CFG_INTRAM_SIZE			INTERNAL_SRAM_SIZE
+#define CFG_SDRAM_BASE			EBI_SDRAM_BASE
 
 #define CFG_ENV_IS_IN_FLASH		1
 #define CFG_ENV_SIZE			65536
@@ -185,7 +186,7 @@
 #define CFG_DMA_ALLOC_LEN		(16384)
 
 /* Allow 4MB for the kernel run-time image */
-#define CFG_LOAD_ADDR			(CFG_SDRAM_BASE + 0x00400000)
+#define CFG_LOAD_ADDR			(EBI_SDRAM_BASE + 0x00400000)
 #define CFG_BOOTPARAMS_LEN		(16 * 1024)
 
 /* Other configuration settings that shouldn't have to change all that often */
@@ -195,7 +196,7 @@
 #define CFG_PBSIZE			(CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
 #define CFG_LONGHELP			1
 
-#define CFG_MEMTEST_START		CFG_SDRAM_BASE
+#define CFG_MEMTEST_START		EBI_SDRAM_BASE
 #define CFG_MEMTEST_END			(CFG_MEMTEST_START + 0x3f00000)
 #define CFG_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 }