Support passing of OF flat trees to the kernel.

Patch by Pantelis Antoniou, 04 Sep 2005

16 files changed, 313 insertions, 219 deletions

diff --git a/CHANGELOG b/CHANGELOG
index ca73b1e..b051360 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,9 @@
 Changes for U-Boot 1.1.4:
 ======================================================================
 
+* Support passing of OF flat trees to the kernel.
+  Patch by Pantelis Antoniou, 04 Sep 2005
+
 * Cleanup
 
 * Add support for NetSilicon NS7520 processor.
diff --git a/Makefile b/Makefile
index 6ce5416..1b8e4e3 100644
--- a/Makefile
+++ b/Makefile
@@ -1598,6 +1598,9 @@ lubbock_config	:	unconfig
 logodl_config	:	unconfig
 	@./mkconfig $(@:_config=) arm pxa logodl
 
+pxa255_idp_config:	unconfig
+	@./mkconfig $(@:_config=) arm pxa pxa255_idp
+
 wepep250_config	:	unconfig
 	@./mkconfig $(@:_config=) arm pxa wepep250
 
diff --git a/README b/README
index a45ed6d..b0e1fb2 100644
--- a/README
+++ b/README
@@ -399,6 +399,20 @@ The following options need to be configured:
 		expect it to be in bytes, others in MB.
 		Define CONFIG_MEMSIZE_IN_BYTES to make it in bytes.
 
+		CONFIG_OF_FLAT_TREE
+
+		New kernel versions are expecting firmware settings to be
+		passed using flat open firmware trees.
+		The environment variable "disable_of", when set, disables this
+		functionality.
+
+		CONFIG_OF_FLAT_TREE_MAX_SIZE
+
+		The maximum size of the constructed OF tree.
+
+		OF_CPU - The proper name of the cpus node.
+		OF_TBCLK - The timebase frequency.
+
 - Serial Ports:
 		CFG_PL010_SERIAL
 
diff --git a/board/barco/barco.c b/board/barco/barco.c
index 2fb3700..613e722 100644
--- a/board/barco/barco.c
+++ b/board/barco/barco.c
@@ -90,17 +90,17 @@ long int initdram (int board_type)
 	long mear1;
 	long emear1;
 
-	size = get_ram_size(CFG_SDRAM_BASE, CFG_MAX_RAM_SIZE);
+	size = get_ram_size (CFG_SDRAM_BASE, CFG_MAX_RAM_SIZE);
 
 	new_bank0_end = size - 1;
-	mear1 = mpc824x_mpc107_getreg(MEAR1);
-	emear1 = mpc824x_mpc107_getreg(EMEAR1);
+	mear1 = mpc824x_mpc107_getreg (MEAR1);
+	emear1 = mpc824x_mpc107_getreg (EMEAR1);
 	mear1 = (mear1  & 0xFFFFFF00) |
 		((new_bank0_end & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT);
 	emear1 = (emear1 & 0xFFFFFF00) |
 		((new_bank0_end & MICR_ADDR_MASK) >> MICR_EADDR_SHIFT);
-	mpc824x_mpc107_setreg(MEAR1, mear1);
-	mpc824x_mpc107_setreg(EMEAR1, emear1);
+	mpc824x_mpc107_setreg (MEAR1, mear1);
+	mpc824x_mpc107_setreg (EMEAR1, emear1);
 
 	return (size);
 }
@@ -113,11 +113,11 @@ static struct pci_config_table pci_barcohydra_config_table[] = {
 	{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x0f, PCI_ANY_ID,
 	  pci_cfgfunc_config_device, { PCI_ENET0_IOADDR,
 				       PCI_ENET0_MEMADDR,
-				       PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER }},
+				       PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER } },
 	{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x10, PCI_ANY_ID,
 	  pci_cfgfunc_config_device, { PCI_ENET1_IOADDR,
 				       PCI_ENET1_MEMADDR,
-				       PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER }},
+				       PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER } },
 	{ }
 };
 #endif
@@ -128,68 +128,66 @@ struct pci_controller hose = {
 #endif
 };
 
-void pci_init_board(void)
+void pci_init_board (void)
 {
-	pci_mpc824x_init(&hose);
+	pci_mpc824x_init (&hose);
 }
 
-int write_flash(char *addr, char value)
+int write_flash (char *addr, char value)
 {
 	char *adr = (char *)0xFF800000;
 	int cnt = 0;
 	char status,oldstatus;
-	*(adr+0x55) = 0xAA;
 
-	udelay(1);
-	*(adr+0xAA) = 0x55;
-	udelay(1);
-	*(adr+0x55) = 0xA0;
-	udelay(1);
+	*(adr+0x55) = 0xAA; udelay (1);
+	*(adr+0xAA) = 0x55; udelay (1);
+	*(adr+0x55) = 0xA0; udelay (1);
 	*addr = value;
 
 	status = *addr;
-	do{
-
+	do {
 		oldstatus = status;
 		status = *addr;
 
-		if ((oldstatus & 0x40) == (status & 0x40)){
+		if ((oldstatus & 0x40) == (status & 0x40)) {
 			return 4;
 		}
 		cnt++;
-		if (cnt > 10000){
+		if (cnt > 10000) {
 			return 2;
 		}
-	}while( (status & 0x20) == 0 );
+	} while ( (status & 0x20) == 0 );
 
 	oldstatus = *addr;
 	status = *addr;
 
-	if ((oldstatus & 0x40) == (status & 0x40)) return 0;
-	else {
+	if ((oldstatus & 0x40) == (status & 0x40)) {
+		return 0;
+	} else {
 		*(adr+0x55) = 0xF0;
 		return 1;
 	}
 }
 
-unsigned update_flash(unsigned char* buf){
-	switch((*buf) & 0x3){
-		case TRY_WORKING:
-			printf("found 3 and converted it to 2\n");
-			write_flash(buf, (*buf) & 0xFE);
-			*((unsigned char *)0xFF800000) = 0xF0;
-			udelay(100);
-			printf("buf [%#010x] %#010x\n",buf,(*buf));
-		case BOOT_WORKING :
-			return BOOT_WORKING;
+unsigned update_flash (unsigned char *buf)
+{
+	switch ((*buf) & 0x3) {
+	case TRY_WORKING:
+		printf ("found 3 and converted it to 2\n");
+		write_flash (buf, (*buf) & 0xFE);
+		*((unsigned char *)0xFF800000) = 0xF0;
+		udelay (100);
+		printf ("buf [%#010x] %#010x\n", buf, (*buf));
+		/* XXX - fall through??? */
+	case BOOT_WORKING :
+		return BOOT_WORKING;
 	}
 	return BOOT_DEFAULT;
 }
 
-unsigned scan_flash(void)
+unsigned scan_flash (void)
 {
 	char section[] =  "kernel";
-	ulong   sp;
 	int cfgFileLen  =  (CFG_FLASH_ERASE_SECTOR_LENGTH >> 1);
 	int sectionPtr  = 0;
 	int foundItem   = 0; /* 0: None, 1: section found, 2: "=" found */
@@ -198,57 +196,54 @@ unsigned scan_flash(void)
 
 	buf = (unsigned char*)(CFG_FLASH_RANGE_BASE + CFG_FLASH_RANGE_SIZE \
 			- CFG_FLASH_ERASE_SECTOR_LENGTH);
-	for(bufPtr = 0; bufPtr < cfgFileLen; ++bufPtr){
+	for (bufPtr = 0; bufPtr < cfgFileLen; ++bufPtr) {
 		if ((buf[bufPtr]==0xFF) && (*(int*)(buf+bufPtr)==0xFFFFFFFF)) {
 			return BOOT_DEFAULT;
 		}
-		switch(foundItem)
-		{
-			/* This is the scanning loop, we try to find a particular
-			 * quoted value
-			 */
-			case 0:
-				if((section[sectionPtr] == 0)){
-					++foundItem;
-				}
-				else if(buf[bufPtr] == section[sectionPtr]){
-					++sectionPtr;
-				}
-				else {
-					sectionPtr = 0;
-				}
-				break;
-			case 1:
+		/* This is the scanning loop, we try to find a particular
+		 * quoted value
+		 */
+		switch (foundItem) {
+		case 0:
+			if ((section[sectionPtr] == 0)) {
 				++foundItem;
-				break;
-			case 2:
-				++foundItem;
-				break;
-			case 3:
-			default:
-				return update_flash(buf[bufPtr - 1]);
+			} else if (buf[bufPtr] == section[sectionPtr]) {
+				++sectionPtr;
+			} else {
+				sectionPtr = 0;
+			}
+			break;
+		case 1:
+			++foundItem;
+			break;
+		case 2:
+			++foundItem;
+			break;
+		case 3:
+		default:
+			return update_flash (&buf[bufPtr - 1]);
 		}
 	}
 
-	printf("Failed to read %s\n",section);
+	printf ("Failed to read %s\n",section);
 	return BOOT_DEFAULT;
 }
 
-TSBootInfo* find_boot_info(void)
+TSBootInfo* find_boot_info (void)
 {
-	unsigned bootimage = scan_flash();
-	TSBootInfo* info = (TSBootInfo*)malloc(sizeof(TSBootInfo));
-
-	switch(bootimage){
-		case TRY_WORKING:
-				info->address = CFG_WORKING_KERNEL_ADDRESS;
-				break;
-		case BOOT_WORKING :
-				info->address = CFG_WORKING_KERNEL_ADDRESS;
-				break;
-		case BOOT_DEFAULT:
-		default:
-				info->address= CFG_DEFAULT_KERNEL_ADDRESS;
+	unsigned bootimage = scan_flash ();
+	TSBootInfo* info = (TSBootInfo*)malloc (sizeof(TSBootInfo));
+
+	switch (bootimage) {
+	case TRY_WORKING:
+		info->address = CFG_WORKING_KERNEL_ADDRESS;
+		break;
+	case BOOT_WORKING :
+		info->address = CFG_WORKING_KERNEL_ADDRESS;
+		break;
+	case BOOT_DEFAULT:
+	default:
+		info->address= CFG_DEFAULT_KERNEL_ADDRESS;
 
 	}
 	info->size = *((unsigned int *)(info->address ));
@@ -256,43 +251,44 @@ TSBootInfo* find_boot_info(void)
 	return info;
 }
 
-void barcobcd_boot(void)
+void barcobcd_boot (void)
 {
 	TSBootInfo* start;
 	char *bootm_args[2];
 	char *buf;
 	int cnt;
+	extern int do_bootm (cmd_tbl_t *, int, int, char *[]);
 
 	buf = (char *)(0x00800000);
 	/* make certain there are enough chars to print the command line here!
 	 */
-	bootm_args[0]=(char *)malloc(16*sizeof(char));
-	bootm_args[1]=(char *)malloc(16*sizeof(char));
+	bootm_args[0] = (char *)malloc (16*sizeof(char));
+	bootm_args[1] = (char *)malloc (16*sizeof(char));
 
-	start = find_boot_info();
+	start = find_boot_info ();
 
-	printf("Booting kernel at address %#10x with size %#10x\n",
+	printf ("Booting kernel at address %#10x with size %#10x\n",
 			start->address, start->size);
 
 	/* give length of the kernel image to bootm */
-	sprintf(bootm_args[0],"%x",start->size);
+	sprintf (bootm_args[0],"%x",start->size);
 	/* give address of the kernel image to bootm */
-	sprintf(bootm_args[1],"%x",buf);
+	sprintf (bootm_args[1],"%x",buf);
 
-	printf("flash address: %#10x\n",start->address+8);
-	printf("buf address: %#10x\n",buf);
+	printf ("flash address: %#10x\n",start->address+8);
+	printf ("buf address: %#10x\n",buf);
 
 	/* aha, we reserve 8 bytes here... */
-	for (cnt = 0; cnt < start->size ; cnt++){
+	for (cnt = 0; cnt < start->size ; cnt++) {
 		buf[cnt] = ((char *)start->address)[cnt+8];
 	}
 
 	/* initialise RAM memory */
 	*((unsigned int *)0xFEC00000) = 0x00141A98;
-	do_bootm(NULL,0,2,bootm_args);
+	do_bootm (NULL,0,2,bootm_args);
 }
 
-int barcobcd_boot_image(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+int barcobcd_boot_image (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
 #if 0
 	if (argc > 1) {
@@ -300,7 +296,7 @@ int barcobcd_boot_image(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 		return 1;
 	}
 #endif
-	barcobcd_boot();
+	barcobcd_boot ();
 
 	return 0;
 }
@@ -308,19 +304,19 @@ int barcobcd_boot_image(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 /* Currently, boot_working and boot_default are the same command. This is
  * left in here to see what we'll do in the future */
 
-U_BOOT_CMD(
+U_BOOT_CMD (
 		try_working, 1, 1, barcobcd_boot_image,
 		" try_working - check flash value and boot the appropriate image\n",
 		"\n"
 	  );
 
-U_BOOT_CMD(
+U_BOOT_CMD (
 		boot_working, 1, 1, barcobcd_boot_image,
 		" boot_working - check flash value and boot the appropriate image\n",
 		"\n"
 	  );
 
-U_BOOT_CMD(
+U_BOOT_CMD (
 		boot_default, 1, 1, barcobcd_boot_image,
 		" boot_default - check flash value and boot the appropriate image\n",
 		"\n"
@@ -328,13 +324,40 @@ U_BOOT_CMD(
 /*
  * We are not using serial communication, so just provide empty functions
  */
-int serial_init(void){return 0;}
-void serial_setbrg(void){}
-void serial_putc(const char c){}
-void serial_puts(const char *c){}
-void serial_addr(unsigned int i){}
-int serial_getc(void){return 0;}
-int serial_tstc(void){return 0;}
-
-unsigned long post_word_load(void){return 0l;};
-void post_word_store(unsigned long val){}
+int serial_init (void)
+{
+	return 0;
+}
+void serial_setbrg (void)
+{
+	return;
+}
+void serial_putc (const char c)
+{
+	return;
+}
+void serial_puts (const char *c)
+{
+	return;
+}
+void serial_addr (unsigned int i)
+{
+	return;
+}
+int serial_getc (void)
+{
+	return 0;
+}
+int serial_tstc (void)
+{
+	return 0;
+}
+
+unsigned long post_word_load (void)
+{
+	return 0l;
+}
+void post_word_store (unsigned long val)
+{
+	return;
+}
diff --git a/common/Makefile b/common/Makefile
index 6366e02..7dbf84a 100644
--- a/common/Makefile
+++ b/common/Makefile
@@ -46,7 +46,7 @@ COBJS	= main.o ACEX1K.o altera.o bedbug.o circbuf.o \
 	  env_nand.o env_dataflash.o env_flash.o env_eeprom.o \
 	  env_nvram.o env_nowhere.o \
 	  exports.o \
-	  flash.o fpga.o \
+	  flash.o fpga.o ft_build.o \
 	  hush.o kgdb.o lcd.o lists.o lynxkdi.o \
 	  memsize.o miiphybb.o miiphyutil.o \
 	  s_record.o serial.o soft_i2c.o soft_spi.o spartan2.o spartan3.o \
diff --git a/common/cmd_bootm.c b/common/cmd_bootm.c
index ab6ccbb..ee1b5c1 100644
--- a/common/cmd_bootm.c
+++ b/common/cmd_bootm.c
@@ -34,6 +34,10 @@
 #include <environment.h>
 #include <asm/byteorder.h>
 
+#ifdef CONFIG_OF_FLAT_TREE
+#include <ft_build.h>
+#endif
+
  /*cmd_boot.c*/
  extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
 
@@ -489,6 +493,11 @@ fixup_silent_linux ()
 }
 #endif /* CONFIG_SILENT_CONSOLE */
 
+#ifdef CONFIG_OF_FLAT_TREE
+extern const unsigned char oftree_dtb[];
+extern const unsigned int oftree_dtb_len;
+#endif
+
 #ifdef CONFIG_PPC
 static void
 do_bootm_linux (cmd_tbl_t *cmdtp, int flag,
@@ -511,6 +520,9 @@ do_bootm_linux (cmd_tbl_t *cmdtp, int flag,
 	bd_t	*kbd;
 	void	(*kernel)(bd_t *, ulong, ulong, ulong, ulong);
 	image_header_t *hdr = &header;
+#ifdef CONFIG_OF_FLAT_TREE
+	char	*of_flat_tree;
+#endif
 
 	if ((s = getenv ("initrd_high")) != NULL) {
 		/* a value of "no" or a similar string will act like 0,
@@ -776,15 +788,26 @@ do_bootm_linux (cmd_tbl_t *cmdtp, int flag,
 		initrd_end = 0;
 	}
 
+#ifdef CONFIG_OF_FLAT_TREE
+	if (initrd_start == 0)
+		of_flat_tree = (char *)(((ulong)kbd - OF_FLAT_TREE_MAX_SIZE -
+					sizeof(bd_t)) & ~0xF);
+	else
+		of_flat_tree = (char *)((initrd_start - OF_FLAT_TREE_MAX_SIZE -
+					sizeof(bd_t)) & ~0xF);
+#endif
 
 	debug ("## Transferring control to Linux (at address %08lx) ...\n",
 		(ulong)kernel);
 
 	SHOW_BOOT_PROGRESS (15);
 
+#ifndef CONFIG_OF_FLAT_TREE
+
 #if defined(CFG_INIT_RAM_LOCK) && !defined(CONFIG_E500)
 	unlock_ram_in_cache();
 #endif
+
 	/*
 	 * Linux Kernel Parameters:
 	 *   r3: ptr to board info data
@@ -794,6 +817,25 @@ do_bootm_linux (cmd_tbl_t *cmdtp, int flag,
 	 *   r7: End   of command line string
 	 */
 	(*kernel) (kbd, initrd_start, initrd_end, cmd_start, cmd_end);
+
+#else
+	ft_setup(of_flat_tree, OF_FLAT_TREE_MAX_SIZE, kbd);
+	/* ft_dump_blob(of_flat_tree); */
+
+#if defined(CFG_INIT_RAM_LOCK) && !defined(CONFIG_E500)
+	unlock_ram_in_cache();
+#endif
+	/*
+	 * Linux Kernel Parameters:
+	 *   r3: ptr to OF flat tree, followed by the board info data
+	 *   r4: initrd_start or 0 if no initrd
+	 *   r5: initrd_end - unused if r4 is 0
+	 *   r6: Start of command line string
+	 *   r7: End   of command line string
+	 */
+	(*kernel) ((bd_t *)of_flat_tree, initrd_start, initrd_end, cmd_start, cmd_end);
+
+#endif
 }
 #endif /* CONFIG_PPC */
 
diff --git a/common/cmd_immap.c b/common/cmd_immap.c
index 9db5f2c..f1b0535 100644
--- a/common/cmd_immap.c
+++ b/common/cmd_immap.c
@@ -318,11 +318,20 @@ int
 do_iopset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
 	uint rcode = 0;
+	iopin_t iopin;
 	static uint port = 0;
 	static uint pin = 0;
 	static uint value = 0;
-	static enum { DIR, PAR, SOR, ODR, DAT, INT } cmd = DAT;
-	iopin_t iopin;
+	static enum {
+		DIR,
+		PAR,
+		SOR,
+		ODR,
+		DAT,
+#if defined(CONFIG_8xx)
+		INT
+#endif
+	} cmd = DAT;
 
 	if (argc != 5) {
 		puts ("iopset PORT PIN CMD VALUE\n");
diff --git a/cpu/arm920t/at91rm9200/ether.c b/cpu/arm920t/at91rm9200/ether.c
index d88517f..ca5b7d1 100644
--- a/cpu/arm920t/at91rm9200/ether.c
+++ b/cpu/arm920t/at91rm9200/ether.c
@@ -184,7 +184,7 @@ int eth_init (bd_t * bd)
 
 	/* Init Ehternet buffers */
 	for (i = 0; i < RBF_FRAMEMAX; i++) {
-		rbfdt[i].addr = rbf_framebuf[i];
+		rbfdt[i].addr = (unsigned long)rbf_framebuf[i];
 		rbfdt[i].size = 0;
 	}
 	rbfdt[RBF_FRAMEMAX - 1].addr |= RBF_WRAP;
diff --git a/include/configs/AP1000.h b/include/configs/AP1000.h
index c34d650..ba4b1a2 100644
--- a/include/configs/AP1000.h
+++ b/include/configs/AP1000.h
@@ -24,19 +24,19 @@
 
 #undef DEBUG
 
-#define CONFIG_405  1	   /* This is a PPC405 CPU     */
-#define CONFIG_4xx  1	   /* ...member of PPC4xx family   */
+#define CONFIG_405	1		/* This is a PPC405 CPU	    */
+#define CONFIG_4xx	1		/* ...member of PPC4xx family	*/
 
-#define CONFIG_AP1000  1   /* ...on an AP1000 board    */
+#define CONFIG_AP1000	1		/* ...on an AP1000 board    */
 
-#define CONFIG_PCI 1
+#define CONFIG_PCI	1
 
-#define CFG_HUSH_PARSER		1	/* use "hush" command parser	*/
-#define CFG_PROMPT			"0> "
+#define CFG_HUSH_PARSER 1		/* use "hush" command parser	*/
+#define CFG_PROMPT		"0> "
 #define CFG_PROMPT_HUSH_PS2	"> "
 
-#define CONFIG_COMMAND_EDIT 1
-#define CONFIG_COMMAND_HISTORY 1
+#define CONFIG_COMMAND_EDIT	1
+#define CONFIG_COMMAND_HISTORY	1
 #define CONFIG_COMPLETE_ADDRESSES 1
 
 #define CFG_ENV_IS_IN_FLASH	1
@@ -50,10 +50,10 @@
 #endif
 #endif
 
-#define CONFIG_BAUDRATE	    57600
-#define CONFIG_BOOTDELAY    3  /* autoboot after 3 seconds */
+#define CONFIG_BAUDRATE		57600
+#define CONFIG_BOOTDELAY	3	/* autoboot after 3 seconds */
 
-#define CONFIG_BOOTCOMMAND  ""	    /* autoboot command */
+#define CONFIG_BOOTCOMMAND	""	/* autoboot command */
 
 /* Size (bytes) of interrupt driven serial port buffer.
  * Set to 0 to use polling instead of interrupts.
@@ -61,48 +61,47 @@
  */
 #undef	CONFIG_SERIAL_SOFTWARE_FIFO
 
-#define CONFIG_BOOTARGS	    "console=ttyS0,57600"
+#define CONFIG_BOOTARGS		"console=ttyS0,57600"
 
-#define CONFIG_LOADS_ECHO   1	/* echo on for serial download	*/
-#define CFG_LOADS_BAUD_CHANGE	1   /* allow baudrate change	*/
+#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
+#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
-#define CONFIG_COMMANDS	       ( (CONFIG_CMD_DFL & \
-		(~CFG_CMD_RTC) & ~(CFG_CMD_I2C)) | \
-		CFG_CMD_IRQ | \
-		CFG_CMD_PCI | \
-		CFG_CMD_DHCP | \
-		CFG_CMD_ASKENV | \
-		CFG_CMD_ELF  | \
-		CFG_CMD_PING | \
-		CFG_CMD_MVENV  \
+#define CONFIG_COMMANDS	       (CONFIG_CMD_DFL	| \
+				CFG_CMD_ASKENV	| \
+				CFG_CMD_DHCP	| \
+				CFG_CMD_ELF	| \
+				CFG_CMD_IRQ	| \
+				CFG_CMD_MVENV	| \
+				CFG_CMD_PCI	| \
+				CFG_CMD_PING	\
 			       )
 
 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
 #include <cmd_confdefs.h>
 
-#undef CONFIG_WATCHDOG		/* watchdog disabled	    */
+#undef CONFIG_WATCHDOG			/* watchdog disabled	    */
 
-#define CONFIG_SYS_CLK_FREQ 30000000
+#define CONFIG_SYS_CLK_FREQ	30000000
 
-#define CONFIG_SPD_EEPROM      1       /* use SPD EEPROM for setup    */
+#define CONFIG_SPD_EEPROM	1	/* use SPD EEPROM for setup    */
 
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP		/* undef to save memory	    */
+#define CFG_LONGHELP			/* undef to save memory	    */
 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#define CFG_CBSIZE  1024	/* Console I/O Buffer Size  */
+#define CFG_CBSIZE	1024		/* Console I/O Buffer Size  */
 #else
-#define CFG_CBSIZE  256	    /* Console I/O Buffer Size	*/
+#define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
 /* usually: (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) */
-#define CFG_PBSIZE (CFG_CBSIZE+4+16) /* Print Buffer Size */
-#define CFG_MAXARGS 16	    /* max number of command args   */
-#define CFG_BARGSIZE	CFG_CBSIZE  /* Boot Argument Buffer Size    */
+#define CFG_PBSIZE	(CFG_CBSIZE+4+16)	/* Print Buffer Size */
+#define CFG_MAXARGS	16		/* max number of command args	*/
+#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_ALT_MEMTEST	    1
-#define CFG_MEMTEST_START   0x00400000	/* memtest works on */
-#define CFG_MEMTEST_END	    0x01000000	/* 4 ... 16 MB in DRAM	*/
+#define CFG_ALT_MEMTEST		1
+#define CFG_MEMTEST_START	0x00400000	/* memtest works on */
+#define CFG_MEMTEST_END		0x01000000	/* 4 ... 16 MB in DRAM	*/
 
 /*
  * If CFG_EXT_SERIAL_CLOCK, then the UART divisor is 1.
@@ -113,84 +112,84 @@
  * If CFG_405_UART_ERRATA_59 and 200MHz CPU clock,
  * set Linux BASE_BAUD to 403200.
  */
-#undef	CFG_EXT_SERIAL_CLOCK	       /* external serial clock */
-#undef	CFG_405_UART_ERRATA_59	       /* 405GP/CR Rev. D silicon */
-
-#define CFG_NS16550_CLK	    40000000
-#define CFG_DUART_CHAN	    0
-#define CFG_NS16550_COM1    (0x4C000000 + 0x1000)
-#define CFG_NS16550_COM2    (0x4C800000 + 0x1000)
-#define CFG_NS16550_REG_SIZE 4
-#define CFG_NS16550 1
-#define CFG_INIT_CHAN1	 1
-#define CFG_INIT_CHAN2	 0
+#undef	CFG_EXT_SERIAL_CLOCK		/* external serial clock */
+#undef	CFG_405_UART_ERRATA_59		/* 405GP/CR Rev. D silicon */
+
+#define CFG_NS16550_CLK		40000000
+#define CFG_DUART_CHAN		0
+#define CFG_NS16550_COM1	(0x4C000000 + 0x1000)
+#define CFG_NS16550_COM2	(0x4C800000 + 0x1000)
+#define CFG_NS16550_REG_SIZE	4
+#define CFG_NS16550		1
+#define CFG_INIT_CHAN1		1
+#define CFG_INIT_CHAN2		0
 
 /* The following table includes the supported baudrates */
 #define CFG_BAUDRATE_TABLE  \
     {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
 
-#define CFG_LOAD_ADDR	    0x00100000	/* default load address */
-#define CFG_EXTBDINFO	    1	/* To use extended board_into (bd_t) */
+#define CFG_LOAD_ADDR		0x00200000	/* default load address */
+#define CFG_EXTBDINFO		1		/* To use extended board_into (bd_t) */
 
-#define CFG_HZ	    1000	/* decrementer freq: 1 ms ticks */
+#define CFG_HZ			1000		/* decrementer freq: 1 ms ticks */
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
  * Please note that CFG_SDRAM_BASE _must_ start at 0
  */
-#define CFG_SDRAM_BASE	    0x00000000
-#define CFG_FLASH_BASE	    0x20000000
-#define CFG_MONITOR_BASE    TEXT_BASE
-#define CFG_MONITOR_LEN	    (192 * 1024)    /* Reserve 196 kB for Monitor   */
-#define CFG_MALLOC_LEN	    (128 * 1024)    /* Reserve 128 kB for malloc()  */
+#define CFG_SDRAM_BASE		0x00000000
+#define CFG_FLASH_BASE		0x20000000
+#define CFG_MONITOR_BASE	TEXT_BASE
+#define CFG_MONITOR_LEN		(192 * 1024)	/* Reserve 196 kB for Monitor	*/
+#define CFG_MALLOC_LEN		(128 * 1024)	/* Reserve 128 kB for malloc()	*/
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ	    (8 << 20)	/* Initial Memory map for Linux */
+#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_FLASH_CFI	    1
-#define CFG_PROGFLASH_BASE  CFG_FLASH_BASE
-#define CFG_CONFFLASH_BASE  0x24000000
+#define CFG_FLASH_CFI		1
+#define CFG_PROGFLASH_BASE	CFG_FLASH_BASE
+#define CFG_CONFFLASH_BASE	0x24000000
 
-#define CFG_MAX_FLASH_BANKS 2	/* max number of memory banks	    */
-#define CFG_MAX_FLASH_SECT  256 /* max number of sectors on one chip	*/
+#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks	    */
+#define CFG_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
 
 #define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)  */
-#define CFG_FLASH_WRITE_TOUT	500 /* Timeout for Flash Write (in ms)	*/
+#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
-#define CFG_FLASH_PROTECTION	1   /* use hardware protection	    */
+#define CFG_FLASH_PROTECTION	1	/* use hardware protection	    */
 
 /* BEG ENVIRONNEMENT FLASH */
 #ifdef CFG_ENV_IS_IN_FLASH
-#define CFG_ENV_OFFSET	    0x00040000 /* Offset of Environment Sector	*/
-#define CFG_ENV_SIZE	    0x1000  /* Total Size of Environment Sector */
-#define CFG_ENV_SECT_SIZE   0x20000 /* see README - env sector total size   */
+#define CFG_ENV_OFFSET		0x00040000 /* Offset of Environment Sector	*/
+#define CFG_ENV_SIZE		0x1000	/* Total Size of Environment Sector */
+#define CFG_ENV_SECT_SIZE	0x20000 /* see README - env sector total size	*/
 #endif
 /* END ENVIRONNEMENT FLASH */
 /*-----------------------------------------------------------------------
  * NVRAM organization
  */
-#define CFG_NVRAM_BASE_ADDR 0xf0000000	/* NVRAM base address	*/
-#define CFG_NVRAM_SIZE	    0x1ff8	/* NVRAM size	*/
+#define CFG_NVRAM_BASE_ADDR	0xf0000000	/* NVRAM base address	*/
+#define CFG_NVRAM_SIZE		0x1ff8		/* NVRAM size	*/
 
 #ifdef CFG_ENV_IS_IN_NVRAM
-#define CFG_ENV_SIZE	    0x1000	/* Size of Environment vars */
+#define CFG_ENV_SIZE		0x1000		/* Size of Environment vars */
 #define CFG_ENV_ADDR	    \
     (CFG_NVRAM_BASE_ADDR+CFG_NVRAM_SIZE-CFG_ENV_SIZE)	/* Env	*/
 #endif
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_DCACHE_SIZE	    16384
-#define CFG_CACHELINE_SIZE  32
+#define CFG_DCACHE_SIZE		16384
+#define CFG_CACHELINE_SIZE	32
 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT 5	/* log base 2 of the above value    */
+#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value    */
 #endif
 
 /*
@@ -199,11 +198,11 @@
  * BR0/1 and OR0/1 (FLASH)
  */
 
-#define FLASH_BASE0_PRELIM  CFG_FLASH_BASE  /* FLASH bank #0	*/
-#define FLASH_BASE1_PRELIM  0	    /* FLASH bank #1	*/
+#define FLASH_BASE0_PRELIM	CFG_FLASH_BASE	/* FLASH bank #0	*/
+#define FLASH_BASE1_PRELIM	0		/* FLASH bank #1	*/
 
 /* Configuration Port location */
-#define CONFIG_PORT_ADDR    0xF0000500
+#define CONFIG_PORT_ADDR	0xF0000500
 
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
@@ -211,8 +210,8 @@
 
 #define CFG_INIT_RAM_ADDR	0x400000  /* inside of SDRAM			 */
 #define CFG_INIT_RAM_END	0x2000	/* End of used area in RAM	       */
-#define CFG_GBL_DATA_SIZE      128  /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_OFFSET    (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
 #define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
@@ -226,25 +225,25 @@
  *
  * Boot Flags
  */
-#define BOOTFLAG_COLD	0x01	    /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM	0x02	    /* Software reboot		*/
+#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM	0x02		/* Software reboot		*/
 
 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2   /* which serial port to use */
+#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /* JFFS2 stuff */
 
-#define CFG_JFFS2_FIRST_BANK 0
-#define CFG_JFFS2_NUM_BANKS 1
-#define CFG_JFFS2_FIRST_SECTOR 1
+#define CFG_JFFS2_FIRST_BANK	0
+#define CFG_JFFS2_NUM_BANKS	1
+#define CFG_JFFS2_FIRST_SECTOR	1
 
 #define CONFIG_NET_MULTI
 #define CONFIG_E1000
 
-#define CFG_ETH_DEV_FN	   0x0800
-#define CFG_ETH_IOBASE	   0x31000000
-#define CFG_ETH_MEMBASE	   0x32000000
+#define CFG_ETH_DEV_FN		0x0800
+#define CFG_ETH_IOBASE		0x31000000
+#define CFG_ETH_MEMBASE		0x32000000
 
 #endif	/* __CONFIG_H */
diff --git a/include/configs/NC650.h b/include/configs/NC650.h
index d24d05f..cd04c1a 100644
--- a/include/configs/NC650.h
+++ b/include/configs/NC650.h
@@ -99,19 +99,17 @@
 #define SCL		0x1000		/* PA 3 */
 #define SDA		0x2000		/* PA 2 */
 
-#define PAR		immr->im_ioport.iop_papar
-#define DIR		immr->im_ioport.iop_padir
-#define DAT		immr->im_ioport.iop_padat
-
-#define I2C_INIT	{PAR &= ~(SCL | SDA); DIR |=  SCL;}
-#define I2C_ACTIVE	(DIR |=  SDA)
-#define I2C_TRISTATE	(DIR &= ~SDA)
-#define I2C_READ	((DAT & SDA) != 0)
-#define I2C_SDA(bit)	if (bit) DAT |=  SDA; \
-			else DAT &= ~SDA
-#define I2C_SCL(bit)	if (bit) DAT |=  SCL; \
-			else DAT &= ~SCL
-#define I2C_DELAY	udelay(5)	/* 1/4 I2C clock duration */
+#define __I2C_DIR	immr->im_ioport.iop_padir
+#define __I2C_DAT	immr->im_ioport.iop_padat
+#define __I2C_PAR	immr->im_ioport.iop_papar
+#define	I2C_INIT	{ __I2C_PAR &= ~(SDA|SCL);	\
+			  __I2C_DIR |= (SDA|SCL);	}
+#define	I2C_READ	((__I2C_DAT & SDA) ? 1 : 0)
+#define	I2C_SDA(x)	{ if (x) __I2C_DAT |= SDA; else __I2C_DAT &= ~SDA; }
+#define	I2C_SCL(x)	{ if (x) __I2C_DAT |= SCL; else __I2C_DAT &= ~SCL; }
+#define	I2C_DELAY	{ udelay(5); }
+#define	I2C_ACTIVE	{ __I2C_DIR |= SDA; }
+#define	I2C_TRISTATE	{ __I2C_DIR &= ~SDA; }
 
 #define CONFIG_RTC_PCF8563
 #define CFG_I2C_RTC_ADDR		0x51
diff --git a/include/configs/PM854.h b/include/configs/PM854.h
index af06efc..0b8c71d 100644
--- a/include/configs/PM854.h
+++ b/include/configs/PM854.h
@@ -235,7 +235,7 @@
 #define CONFIG_NET_MULTI
 #define CONFIG_PCI_PNP			/* do pci plug-and-play */
 
-#define	CONFIG_EEPRO100
+/* #define CONFIG_EEPRO100	XXX - FIXME: conflicts when CONFIG_MII is enabled */
 #define	CONFIG_E1000
 #undef	CONFIG_TULIP
 
diff --git a/include/configs/TOP860.h b/include/configs/TOP860.h
index af74f9d..99a7b08 100644
--- a/include/configs/TOP860.h
+++ b/include/configs/TOP860.h
@@ -181,17 +181,20 @@
 #if defined (CONFIG_SOFT_I2C)
 #define	SDA	0x00010
 #define	SCL	0x00020
-#define DIR immr->im_cpm.cp_pbdir
-#define DAT	immr->im_cpm.cp_pbdat
-#define PAR	immr->im_cpm.cp_pbpar
-#define	ODR	immr->im_cpm.cp_pbodr
-#define	I2C_INIT	{PAR&=~(SDA|SCL);ODR&=~(SDA|SCL);DAT|=(SDA|SCL);DIR|=(SDA|SCL);}
-#define	I2C_READ	((DAT&SDA)?1:0)
-#define	I2C_SDA(x)	{if(x)DAT|=SDA;else DAT&=~SDA;}
-#define	I2C_SCL(x)	{if(x)DAT|=SCL;else DAT&=~SCL;}
-#define	I2C_DELAY	{udelay(5);}
-#define	I2C_ACTIVE	 {DIR|=SDA;}
-#define	I2C_TRISTATE {DIR&=~SDA;}
+#define __I2C_DIR	immr->im_cpm.cp_pbdir
+#define __I2C_DAT	immr->im_cpm.cp_pbdat
+#define __I2C_PAR	immr->im_cpm.cp_pbpar
+#define	__I2C_ODR	immr->im_cpm.cp_pbodr
+#define	I2C_INIT	{ __I2C_PAR &= ~(SDA|SCL);	\
+			  __I2C_ODR &= ~(SDA|SCL);	\
+			  __I2C_DAT |= (SDA|SCL);	\
+			  __I2C_DIR|=(SDA|SCL);	}
+#define	I2C_READ	((__I2C_DAT & SDA) ? 1 : 0)
+#define	I2C_SDA(x)	{ if (x) __I2C_DAT |= SDA; else __I2C_DAT &= ~SDA; }
+#define	I2C_SCL(x)	{ if (x) __I2C_DAT |= SCL; else __I2C_DAT &= ~SCL; }
+#define	I2C_DELAY	{ udelay(5); }
+#define	I2C_ACTIVE	{ __I2C_DIR |= SDA; }
+#define	I2C_TRISTATE	{ __I2C_DIR &= ~SDA; }
 #endif
 
 #define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h
index 909d724..a57f7cf 100644
--- a/include/configs/TQM5200.h
+++ b/include/configs/TQM5200.h
@@ -83,7 +83,7 @@
 #define CONFIG_PCI_IO_SIZE	0x01000000
 
 #define CONFIG_NET_MULTI	1
-#define CONFIG_EEPRO100		1
+/* #define CONFIG_EEPRO100	XXX - FIXME: conflicts when CONFIG_MII is enabled */
 #define CFG_RX_ETH_BUFFER	8  /* use 8 rx buffer on eepro100  */
 #define CONFIG_NS8382X		1
 #endif	/* CONFIG_STK52XX */
diff --git a/include/configs/TQM8560.h b/include/configs/TQM8560.h
index d2c230d..04966d7 100644
--- a/include/configs/TQM8560.h
+++ b/include/configs/TQM8560.h
@@ -283,7 +283,7 @@
 #define CONFIG_NET_MULTI
 #define CONFIG_PCI_PNP			/* do pci plug-and-play */
 
-#define CONFIG_EEPRO100
+/* #define CONFIG_EEPRO100	XXX - FIXME: conflicts when CONFIG_MII is enabled */
 #undef CONFIG_TULIP
 
 #if !defined(CONFIG_PCI_PNP)
diff --git a/include/configs/barco.h b/include/configs/barco.h
index 217c00f..624fa1d 100644
--- a/include/configs/barco.h
+++ b/include/configs/barco.h
@@ -162,7 +162,7 @@
 #define CFG_ENV_IS_IN_FLASH	1
 #define CFG_ENV_OFFSET		0x000047A4	/* Offset of Environment Sector */
 #define CFG_ENV_SIZE		0x00002000	/* Total Size of Environment Sector */
-#define ENV_CRC			0x8BF6F24B
+/* #define ENV_CRC		0x8BF6F24B	XXX - FIXME: gets defined automatically */
 
 #define CFG_MALLOC_LEN		(512 << 10)	/* Reserve 512 kB for malloc()	*/
 
diff --git a/include/configs/o2dnt.h b/include/configs/o2dnt.h
index ffa2678..62b90e8 100644
--- a/include/configs/o2dnt.h
+++ b/include/configs/o2dnt.h
@@ -69,7 +69,7 @@
 #define CFG_XLB_PIPELINING	1
 
 #define CONFIG_NET_MULTI	1
-#define CONFIG_EEPRO100		1
+/* #define CONFIG_EEPRO100	XXX - FIXME: conflicts when CONFIG_MII is enabled */
 #define CFG_RX_ETH_BUFFER	8  /* use 8 rx buffer on eepro100  */
 #define CONFIG_NS8382X		1