* Patch by Paul Ruhland, 17 May 2004:

  - Add support for the Logic Zoom LH7A40x based SDK board(s),
    specifically the LPD7A400.

* Patches by Robert Schwebel, 15 May 2004:
  - call MAC address reading code also for SMSC91C111;
  - make SMSC91C111 timeout configurable, remove duplicate code
  - fix get_timer() for PXA
  - update doc/README.JFFS2
  - use "bootfile" env variable also for jffs2

31 files changed, 3031 insertions, 37 deletions

diff --git a/CHANGELOG b/CHANGELOG
index dd4d246..4043181 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,17 @@
 Changes since U-Boot 1.1.1:
 ======================================================================
 
+* Patch by Paul Ruhland, 17 May 2004:
+  - Add support for the Logic Zoom LH7A40x based SDK board(s),
+    specifically the LPD7A400.
+
+* Patches by Robert Schwebel, 15 May 2004:
+  - call MAC address reading code also for SMSC91C111;
+  - make SMSC91C111 timeout configurable, remove duplicate code
+  - fix get_timer() for PXA
+  - update doc/README.JFFS2
+  - use "bootfile" env variable also for jffs2
+
 * Patch by Tolunay Orkun, 14 May 2004:
   Add support for Cogent CSB472 board (8MB Flash Rev)
 
diff --git a/CREDITS b/CREDITS
index e23c58d..8136e05 100644
--- a/CREDITS
+++ b/CREDITS
@@ -358,3 +358,7 @@ W: www.elinos.com
 N: Xianghua Xiao
 E: x.xiao@motorola.com
 D: Support for Motorola 85xx(PowerQUICC III) chip, MPC8540ADS and MPC8560ADS boards.
+
+N: Paul Ruhland
+E: pruhland@rochester.rr.com
+D: Port to Logic Zoom LH7A40x SDK board(s)
diff --git a/MAKEALL b/MAKEALL
index be10885..7d05331 100644
--- a/MAKEALL
+++ b/MAKEALL
@@ -139,9 +139,10 @@ LIST_ARM7="B2 ep7312 impa7"
 
 LIST_ARM9="	\
 	at91rm9200dk	integratorcp	integratorap			\
-	omap1510inn	omap1610h2	omap1610inn			\
-	omap730p2	smdk2400	smdk2410			\
-	trab		VCMA9		versatile			\
+	lpd7a400	omap1510inn	omap1610h2			\
+	omap1610inn	omap730p2	smdk2400			\
+	smdk2410	trab		VCMA9				\
+	versatile							\
 "
 
 #########################################################################
diff --git a/Makefile b/Makefile
index 68e0745..71edd19 100644
--- a/Makefile
+++ b/Makefile
@@ -1096,6 +1096,8 @@ trab_old_config:	unconfig
 VCMA9_config	:	unconfig
 	@./mkconfig $(@:_config=) arm arm920t vcma9 mpl
 
+lpd7a400_config:	unconfig
+	@./mkconfig $(@:_config=) arm lh7a40x lpd7a40x
 
 #########################################################################
 ## S3C44B0 Systems
diff --git a/README b/README
index db3e4f5..21c7a5c 100644
--- a/README
+++ b/README
@@ -294,9 +294,9 @@ The following options need to be configured:
 		CONFIG_AT91RM9200DK,		CONFIG_DNP1110,		CONFIG_EP7312,
 		CONFIG_H2_OMAP1610,		CONFIG_HHP_CRADLE,	CONFIG_IMPA7,
 		CONFIG_INNOVATOROMAP1510,   CONFIG_INNOVATOROMAP1610,	CONFIG_LART,
-		CONFIG_LUBBOCK,			CONFIG_OSK_OMAP5912,	CONFIG_SHANNON,
-		CONFIG_P2_OMAP730,		CONFIG_SMDK2400,	CONFIG_SMDK2410,
-		CONFIG_TRAB,			CONFIG_VCMA9
+		CONFIG_LPD7A400			CONFIG_LUBBOCK,		CONFIG_OSK_OMAP5912,
+		CONFIG_SHANNON,			CONFIG_P2_OMAP730,	CONFIG_SMDK2400,
+		CONFIG_SMDK2410,		CONFIG_TRAB,		CONFIG_VCMA9
 
 		MicroBlaze based boards:
 		------------------------
@@ -741,6 +741,20 @@ The following options need to be configured:
 			CONFIG_LAN91C96_USE_32_BIT
 			Define this to enable 32 bit addressing
 
+		CONFIG_DRIVER_SMC91111
+		Support for SMSC's LAN91C111 chip
+
+			CONFIG_SMC91111_BASE
+			Define this to hold the physical address
+			of the device (I/O space)
+
+			CONFIG_SMC_USE_32_BIT
+			Define this if data bus is 32 bits
+
+			CONFIG_SMC_USE_IOFUNCS
+			Define this to use i/o functions instead of macros
+			(some hardware wont work with macros)
+
 - USB Support:
 		At the moment only the UHCI host controller is
 		supported (PIP405, MIP405, MPC5200); define
diff --git a/board/lpd7a40x/Makefile b/board/lpd7a40x/Makefile
new file mode 100644
index 0000000..f0999d1
--- /dev/null
+++ b/board/lpd7a40x/Makefile
@@ -0,0 +1,47 @@
+#
+# (C) Copyright 2000, 2001, 2002
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(BOARD).a
+
+OBJS	:= lpd7a40x.o flash.o
+SOBJS	:= memsetup.o
+
+$(LIB):	$(OBJS) $(SOBJS)
+	$(AR) crv $@ $(OBJS) $(SOBJS)
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+		$(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+-include .depend
+
+#########################################################################
diff --git a/board/lpd7a40x/config.mk b/board/lpd7a40x/config.mk
new file mode 100644
index 0000000..bc03874
--- /dev/null
+++ b/board/lpd7a40x/config.mk
@@ -0,0 +1,38 @@
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+# Logic ZOOM LH7A400 SDK board w/Logic LH7A400-10 card engine
+# w/Sharp LH7A400 SoC (ARM920T) cpu
+#
+
+#
+# 32 or 64 MB SDRAM on SDCSC0 @ 0xc0000000
+#
+# Linux-Kernel is @ 0xC0008000, entry 0xc0008000
+# params @ 0xc0000100
+# optionally with a ramdisk at 0xc0300000
+#
+# we load ourself to 0xc1fc0000 (32M - 256K)
+#
+# download area is 0xc0f00000
+#
+
+TEXT_BASE = 0xc1fc0000
+#TEXT_BASE = 0x00000000
diff --git a/board/lpd7a40x/flash.c b/board/lpd7a40x/flash.c
new file mode 100644
index 0000000..26a9ce4
--- /dev/null
+++ b/board/lpd7a40x/flash.c
@@ -0,0 +1,494 @@
+/*
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* #define DEBUG */
+
+#include <common.h>
+#include <environment.h>
+
+#define FLASH_BANK_SIZE 0x1000000	/* 16MB (2 x 8 MB) */
+#define MAIN_SECT_SIZE  0x40000		/* 256KB (2 x 128kB) */
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+
+
+#define CMD_READ_ARRAY		0x00FF00FF
+#define CMD_IDENTIFY		0x00900090
+#define CMD_ERASE_SETUP		0x00200020
+#define CMD_ERASE_CONFIRM	0x00D000D0
+#define CMD_PROGRAM		0x00400040
+#define CMD_RESUME		0x00D000D0
+#define CMD_SUSPEND		0x00B000B0
+#define CMD_STATUS_READ		0x00700070
+#define CMD_STATUS_RESET	0x00500050
+
+#define BIT_BUSY		0x00800080
+#define BIT_ERASE_SUSPEND	0x00400040
+#define BIT_ERASE_ERROR		0x00200020
+#define BIT_PROGRAM_ERROR	0x00100010
+#define BIT_VPP_RANGE_ERROR	0x00080008
+#define BIT_PROGRAM_SUSPEND	0x00040004
+#define BIT_PROTECT_ERROR	0x00020002
+#define BIT_UNDEFINED		0x00010001
+
+#define BIT_SEQUENCE_ERROR	0x00300030
+#define BIT_TIMEOUT		0x80000000
+
+/*-----------------------------------------------------------------------
+ */
+
+ulong flash_init (void)
+{
+	int i, j;
+	ulong size = 0;
+
+	for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+		ulong flashbase = 0;
+
+		flash_info[i].flash_id =
+			(INTEL_MANUFACT     & FLASH_VENDMASK) |
+			(INTEL_ID_28F640J3A & FLASH_TYPEMASK);
+		flash_info[i].size = FLASH_BANK_SIZE;
+		flash_info[i].sector_count = CFG_MAX_FLASH_SECT;
+		memset (flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
+		if (i == 0)
+			flashbase = CFG_FLASH_BASE;
+		else
+			panic ("configured too many flash banks!\n");
+		for (j = 0; j < flash_info[i].sector_count; j++) {
+			flash_info[i].start[j] = flashbase;
+
+			/* uniform sector size */
+			flashbase += MAIN_SECT_SIZE;
+		}
+		size += flash_info[i].size;
+	}
+
+	/*
+	 * Protect monitor and environment sectors
+	 */
+	flash_protect ( FLAG_PROTECT_SET,
+			CFG_FLASH_BASE,
+			CFG_FLASH_BASE + monitor_flash_len - 1,
+			&flash_info[0]);
+
+	flash_protect ( FLAG_PROTECT_SET,
+			CFG_ENV_ADDR,
+			CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]);
+
+#ifdef CFG_ENV_ADDR_REDUND
+	flash_protect ( FLAG_PROTECT_SET,
+			CFG_ENV_ADDR_REDUND,
+			CFG_ENV_ADDR_REDUND + CFG_ENV_SIZE_REDUND - 1,
+			&flash_info[0]);
+#endif
+
+	return size;
+}
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info (flash_info_t * info)
+{
+	int i;
+
+	switch (info->flash_id & FLASH_VENDMASK) {
+	case (INTEL_MANUFACT & FLASH_VENDMASK):
+		printf ("Intel: ");
+		break;
+	default:
+		printf ("Unknown Vendor ");
+		break;
+	}
+
+	switch (info->flash_id & FLASH_TYPEMASK) {
+	case (INTEL_ID_28F640J3A & FLASH_TYPEMASK):
+		printf ("2x 28F640J3A (64Mbit)\n");
+		break;
+	default:
+		printf ("Unknown Chip Type\n");
+		return;
+		break;
+	}
+
+	printf ("  Size: %ld MB in %d Sectors\n",
+			info->size >> 20, info->sector_count);
+
+	printf ("  Sector Start Addresses:");
+	for (i = 0; i < info->sector_count; i++) {
+		if ((i % 5) == 0) {
+			printf ("\n   ");
+		}
+		printf (" %08lX%s",
+			info->start[i],
+			info->protect[i] ? " (RO)" : "     ");
+	}
+	printf ("\n");
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+int flash_error (ulong code)
+{
+	/* Check bit patterns */
+	/* SR.7=0 is busy, SR.7=1 is ready */
+	/* all other flags indicate error on 1 */
+	/* SR.0 is undefined */
+	/* Timeout is our faked flag */
+
+	/* sequence is described in Intel 290644-005 document */
+
+	/* check Timeout */
+	if (code & BIT_TIMEOUT) {
+		puts ("Timeout\n");
+		return ERR_TIMOUT;
+	}
+
+	/* check Busy, SR.7 */
+	if (~code & BIT_BUSY) {
+		puts ("Busy\n");
+		return ERR_PROG_ERROR;
+	}
+
+	/* check Vpp low, SR.3 */
+	if (code & BIT_VPP_RANGE_ERROR) {
+		puts ("Vpp range error\n");
+		return ERR_PROG_ERROR;
+	}
+
+	/* check Device Protect Error, SR.1 */
+	if (code & BIT_PROTECT_ERROR) {
+		puts ("Device protect error\n");
+		return ERR_PROG_ERROR;
+	}
+
+	/* check Command Seq Error, SR.4 & SR.5 */
+	if (code & BIT_SEQUENCE_ERROR) {
+		puts ("Command seqence error\n");
+		return ERR_PROG_ERROR;
+	}
+
+	/* check Block Erase Error, SR.5 */
+	if (code & BIT_ERASE_ERROR) {
+		puts ("Block erase error\n");
+		return ERR_PROG_ERROR;
+	}
+
+	/* check Program Error, SR.4 */
+	if (code & BIT_PROGRAM_ERROR) {
+		puts ("Program error\n");
+		return ERR_PROG_ERROR;
+	}
+
+	/* check Block Erase Suspended, SR.6 */
+	if (code & BIT_ERASE_SUSPEND) {
+		puts ("Block erase suspended\n");
+		return ERR_PROG_ERROR;
+	}
+
+	/* check Program Suspended, SR.2 */
+	if (code & BIT_PROGRAM_SUSPEND) {
+		puts ("Program suspended\n");
+		return ERR_PROG_ERROR;
+	}
+
+	/* OK, no error */
+	return ERR_OK;
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+int flash_erase (flash_info_t * info, int s_first, int s_last)
+{
+	ulong result, result1;
+	int iflag, prot, sect;
+	int rc = ERR_OK;
+
+#ifdef USE_920T_MMU
+	int cflag;
+#endif
+
+	debug ("flash_erase: s_first %d  s_last %d\n", s_first, s_last);
+
+	/* first look for protection bits */
+
+	if (info->flash_id == FLASH_UNKNOWN)
+		return ERR_UNKNOWN_FLASH_TYPE;
+
+	if ((s_first < 0) || (s_first > s_last)) {
+		return ERR_INVAL;
+	}
+
+	if ((info->flash_id & FLASH_VENDMASK) !=
+		(INTEL_MANUFACT & FLASH_VENDMASK)) {
+		return ERR_UNKNOWN_FLASH_VENDOR;
+	}
+
+	prot = 0;
+	for (sect = s_first; sect <= s_last; ++sect) {
+		if (info->protect[sect]) {
+			prot++;
+		}
+	}
+
+	if (prot) {
+		printf ("- Warning: %d protected sectors will not be erased!\n",
+			prot);
+	} else {
+		printf ("\n");
+	}
+
+	/*
+	 * Disable interrupts which might cause a timeout
+	 * here. Remember that our exception vectors are
+	 * at address 0 in the flash, and we don't want a
+	 * (ticker) exception to happen while the flash
+	 * chip is in programming mode.
+	 */
+#ifdef USE_920T_MMU
+	cflag = dcache_status ();
+	dcache_disable ();
+#endif
+	iflag = disable_interrupts ();
+
+	/* Start erase on unprotected sectors */
+	for (sect = s_first; sect <= s_last && !ctrlc (); sect++) {
+
+		debug ("Erasing sector %2d @ %08lX... ",
+			sect, info->start[sect]);
+
+		/* arm simple, non interrupt dependent timer */
+		reset_timer();
+
+		if (info->protect[sect] == 0) {	/* not protected */
+			vu_long *addr = (vu_long *) (info->start[sect]);
+			ulong bsR7, bsR7_2, bsR5, bsR5_2;
+			ulong tstart;
+
+			/* *addr = CMD_STATUS_RESET; */
+			*addr = CMD_ERASE_SETUP;
+			*addr = CMD_ERASE_CONFIRM;
+
+			/* wait until flash is ready */
+			tstart = get_timer(0);
+			do {
+				ulong now;
+				/* check timeout */
+				//if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) {
+				if ((now = get_timer(tstart)) > CFG_FLASH_ERASE_TOUT) {
+					printf("tstart = 0x%08lx, now = 0x%08lx\n", tstart, now);
+					*addr = CMD_STATUS_RESET;
+					result = BIT_TIMEOUT;
+					break;
+				}
+
+				*addr = CMD_STATUS_READ;
+				result = *addr;
+				bsR7 = result & (1 << 7);
+				bsR7_2 = result & (1 << 23);
+			} while (!bsR7 | !bsR7_2);
+
+			*addr = CMD_STATUS_READ;
+			result1 = *addr;
+			bsR5 = result1 & (1 << 5);
+			bsR5_2 = result1 & (1 << 21);
+#ifdef SAMSUNG_FLASH_DEBUG
+			printf ("bsR5 %lx bsR5_2 %lx\n", bsR5, bsR5_2);
+			if (bsR5 != 0 && bsR5_2 != 0)
+				printf ("bsR5 %lx bsR5_2 %lx\n", bsR5, bsR5_2);
+#endif
+
+			*addr = CMD_READ_ARRAY;
+			*addr = CMD_RESUME;
+
+			if ((rc = flash_error (result)) != ERR_OK)
+				goto outahere;
+#if 0
+			printf ("ok.\n");
+		} else {		/* it was protected */
+
+			printf ("protected!\n");
+#endif
+		}
+	}
+
+outahere:
+	/* allow flash to settle - wait 10 ms */
+	udelay_masked (10000);
+
+	if (iflag)
+		enable_interrupts ();
+
+#ifdef USE_920T_MMU
+	if (cflag)
+		dcache_enable ();
+#endif
+	return rc;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash
+ */
+
+volatile static int write_word (flash_info_t * info, ulong dest,
+								ulong data)
+{
+	vu_long *addr = (vu_long *) dest;
+	ulong result;
+	int rc = ERR_OK;
+	int iflag;
+
+#ifdef USE_920T_MMU
+	int cflag;
+#endif
+
+	/*
+	 * Check if Flash is (sufficiently) erased
+	 */
+	result = *addr;
+	if ((result & data) != data)
+		return ERR_NOT_ERASED;
+
+	/*
+	 * Disable interrupts which might cause a timeout
+	 * here. Remember that our exception vectors are
+	 * at address 0 in the flash, and we don't want a
+	 * (ticker) exception to happen while the flash
+	 * chip is in programming mode.
+	 */
+#ifdef USE_920T_MMU
+	cflag = dcache_status ();
+	dcache_disable ();
+#endif
+	iflag = disable_interrupts ();
+
+	/* *addr = CMD_STATUS_RESET; */
+	*addr = CMD_PROGRAM;
+	*addr = data;
+
+	/* arm simple, non interrupt dependent timer */
+	reset_timer_masked ();
+
+	/* wait until flash is ready */
+	do {
+		/* check timeout */
+		if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) {
+			*addr = CMD_SUSPEND;
+			result = BIT_TIMEOUT;
+			break;
+		}
+
+		*addr = CMD_STATUS_READ;
+		result = *addr;
+	} while (~result & BIT_BUSY);
+
+	/* *addr = CMD_READ_ARRAY; */
+	*addr = CMD_STATUS_READ;
+	result = *addr;
+
+	rc = flash_error (result);
+
+	if (iflag)
+		enable_interrupts ();
+
+#ifdef USE_920T_MMU
+	if (cflag)
+		dcache_enable ();
+#endif
+	*addr = CMD_READ_ARRAY;
+	*addr = CMD_RESUME;
+	return rc;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash.
+ */
+
+int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
+{
+	ulong cp, wp, data;
+	int l;
+	int i, rc;
+
+	wp = (addr & ~3);			/* get lower word aligned address */
+
+	/*
+	 * handle unaligned start bytes
+	 */
+	if ((l = addr - wp) != 0) {
+		data = 0;
+		for (i = 0, cp = wp; i < l; ++i, ++cp) {
+			data = (data >> 8) | (*(uchar *) cp << 24);
+		}
+		for (; i < 4 && cnt > 0; ++i) {
+			data = (data >> 8) | (*src++ << 24);
+			--cnt;
+			++cp;
+		}
+		for (; cnt == 0 && i < 4; ++i, ++cp) {
+			data = (data >> 8) | (*(uchar *) cp << 24);
+		}
+
+		if ((rc = write_word (info, wp, data)) != 0) {
+			return (rc);
+		}
+		wp += 4;
+	}
+
+	/*
+	 * handle word aligned part
+	 */
+	while (cnt >= 4) {
+		data = *((vu_long *) src);
+		if ((rc = write_word (info, wp, data)) != 0) {
+			return (rc);
+		}
+		src += 4;
+		wp += 4;
+		cnt -= 4;
+	}
+
+	if (cnt == 0) {
+		return ERR_OK;
+	}
+
+	/*
+	 * handle unaligned tail bytes
+	 */
+	data = 0;
+	for (i = 0, cp = wp; i < 4 && cnt > 0; ++i, ++cp) {
+		data = (data >> 8) | (*src++ << 24);
+		--cnt;
+	}
+	for (; i < 4; ++i, ++cp) {
+		data = (data >> 8) | (*(uchar *) cp << 24);
+	}
+
+	return write_word (info, wp, data);
+}
diff --git a/board/lpd7a40x/lpd7a40x.c b/board/lpd7a40x/lpd7a40x.c
new file mode 100644
index 0000000..8492df3
--- /dev/null
+++ b/board/lpd7a40x/lpd7a40x.c
@@ -0,0 +1,82 @@
+/*
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#if defined(CONFIG_LH7A400)
+#include <lh7a400.h>
+#include <lpd7a400_cpld.h>
+#elif defined(CONFIG_LH7A404)
+#include <lh7a404.h>
+#include <lpd7a404_cpld.h>
+#else
+#error "No CPU defined!"
+#endif
+
+/*
+ * Miscellaneous platform dependent initialisations
+ */
+
+int board_init (void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	/* set up the I/O ports */
+
+#if defined(CONFIG_LH7A400)
+
+	/* enable flash programming */
+	*(LPD7A400_CPLD_REGPTR(LPD7A400_CPLD_FLASH_REG)) |= FLASH_FPEN;
+
+	/* Auto wakeup, LCD disable, WLAN enable */
+	*(LPD7A400_CPLD_REGPTR(LPD7A400_CPLD_CECTL_REG)) &=
+		~(CECTL_AWKP|CECTL_LCDV|CECTL_WLPE);
+
+	/* Status LED 2 on (leds are active low) */
+	*(LPD7A400_CPLD_REGPTR(LPD7A400_CPLD_EXTGPIO_REG)) =
+		(EXTGPIO_STATUS1|EXTGPIO_GPIO1) & ~(EXTGPIO_STATUS2);
+
+	/* arch number of Logic-Board - MACH_TYPE_LPD7A400 */
+	gd->bd->bi_arch_number = MACH_TYPE_LPD7A400;
+
+#elif defined(CONFIG_LH7A404)
+#endif
+
+	/* adress of boot parameters */
+	gd->bd->bi_boot_params = 0xc0000100;
+
+	return 0;
+}
+
+int dram_init (void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+
+	return 0;
+}
diff --git a/board/lpd7a40x/memsetup.S b/board/lpd7a40x/memsetup.S
new file mode 100644
index 0000000..09ab5e7
--- /dev/null
+++ b/board/lpd7a40x/memsetup.S
@@ -0,0 +1,212 @@
+/*
+ * Memory Setup - initialize memory controller(s) for devices required
+ *                to boot and relocate
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+#include <config.h>
+#include <version.h>
+
+
+/* memory controller */
+#define BCRX_DEFAULT	(0x0000fbe0)
+#define BCRX_MW_8	(0x00000000)
+#define BCRX_MW_16	(0x10000000)
+#define BCRX_MW_32	(0x20000000)
+#define BCRX_PME	(0x08000000)
+#define BCRX_WP		(0x04000000)
+#define BCRX_WST2_SHIFT	(11)
+#define BCRX_WST1_SHIFT	(5)
+#define BCRX_IDCY_SHIFT	(0)
+
+/* Bank0 Async Flash */
+#define BCR0	   	(0x80002000)
+#define BCR0_FLASH	(BCRX_MW_32 | (0x08<<BCRX_WST2_SHIFT) | (0x0E<<BCRX_WST1_SHIFT))
+
+/* Bank1 Open */
+#define BCR1	(0x80002004)
+
+/* Bank2 Not used (EEPROM?) */
+#define BCR2	(0x80002008)
+
+/* Bank3 Not used */
+#define BCR3	(0x8000200C)
+
+/* Bank4 PC Card1 */
+
+/* Bank5 PC Card2 */
+
+/* Bank6 CPLD IO Controller Peripherals (slow) */
+#define BCR6	 	(0x80002018)
+#define BCR6_CPLD_SLOW	(BCRX_DEFAULT | BCRX_MW_16)
+
+/* Bank7 CPLD IO Controller Peripherals (fast) */
+#define BCR7		(0x8000201C)
+#define BCR7_CPLD_FAST	(BCRX_MW_16 | (0x16<<BCRX_WST2_SHIFT) | (0x16<<BCRX_WST1_SHIFT) | (0x2<<BCRX_IDCY_SHIFT))
+
+/* SDRAM */
+#define GBLCNFG		(0x80002404)
+#define GC_CKE		(0x80000000)
+#define GC_CKSD		(0x40000000)
+#define GC_LCR		(0x00000040)
+#define GC_SMEMBURST	(0x00000020)
+#define GC_MRS		(0x00000002)
+#define GC_INIT		(0x00000001)
+
+#define GC_CMD_NORMAL		(GC_CKE)
+#define GC_CMD_MODE		(GC_CKE | GC_MRS)
+#define GC_CMD_SYNCFLASH_LOAD	(GC_CKE | GC_MRS | GC_LCR)
+#define GC_CMD_PRECHARGEALL	(GC_CKE | GC_INIT)
+#define GC_CMD_NOP		(GC_CKE | GC_INIT | GC_MRS)
+
+#define RFSHTMR		(0x80002408)
+#define RFSHTMR_INIT	(10)	/* period=100 ns, HCLK=100Mhz, (2048+1-15.6*66) */
+#define RFSHTMR_NORMAL	(1500)	/* period=15.6 us, HCLK=100Mhz, (2048+1-15.6*66) */
+
+#define SDCSCX_BASE		(0x80002410)
+#define SDCSCX_DEFAULT		(0x01220008)
+#define SDCSCX_AUTOPC		(0x01000000)
+#define SDCSCX_RAS2CAS_2	(0x00200000)
+#define SDCSCX_RAS2CAS_3	(0x00300000)
+#define SDCSCX_WBL		(0x00080000)
+#define SDCSCX_CASLAT_8		(0x00070000)
+#define SDCSCX_CASLAT_7		(0x00060000)
+#define SDCSCX_CASLAT_6		(0x00050000)
+#define SDCSCX_CASLAT_5		(0x00040000)
+#define SDCSCX_CASLAT_4		(0x00030000)
+#define SDCSCX_CASLAT_3		(0x00020000)
+#define SDCSCX_CASLAT_2		(0x00010000)
+#define SDCSCX_2KPAGE		(0x00000040)
+#define SDCSCX_SROMLL		(0x00000020)
+#define SDCSCX_SROM512		(0x00000010)
+#define SDCSCX_4BNK		(0x00000008)
+#define SDCSCX_2BNK		(0x00000000)
+#define SDCSCX_EBW_16		(0x00000004)
+#define SDCSCX_EBW_32		(0x00000000)
+
+#define SDRAM_BASE		(0xC0000000)
+#define SDCSC_BANK_OFFSET	(0x10000000)
+
+/*
+ * The SDRAM DEVICE MODE PROGRAMMING VALUE
+ */
+#define BURST_LENGTH_4		(0x010 << 10)
+#define BURST_LENGTH_8		(0x011 << 10)
+#define WBURST_LENGTH_BL	(0x01 << 19)
+#define WBURST_LENGTH_SINGLE	(0x01 << 19)
+#define CAS_2			(0x010 << 14)
+#define CAS_3			(0x011 << 14)
+#define BAT_SEQUENTIAL		(0 << 13)
+#define BAT_INTERLEAVED		(1 << 13)
+#define OPM_NORMAL		(0x00 << 17)
+#define SDRAM_DEVICE_MODE	(WBURST_LENGTH_BL|OPM_NORMAL|CAS_3|BAT_SEQUENTIAL|BURST_LENGTH_4)
+
+
+#define TIMER1_BASE	(0x80000C00)
+
+/*
+ * special lookup flags
+ */
+#define DO_MEM_DELAY	1
+#define DO_MEM_READ	2
+
+_TEXT_BASE:
+	.word	TEXT_BASE
+
+.globl memsetup
+memsetup:
+	mov	r9, lr	@ save return address
+
+	/* memory control configuration */
+	/* make r0 relative the current location so that it */
+	/* reads INITMEM_DATA out of FLASH rather than memory ! */
+	/*   r0 = current word pointer */
+	/*   r1 = end word location, one word past last actual word */
+	/*   r3 = address for writes, special lookup flags */
+	/*   r4 = value for writes, delay constants, or read addresses */
+	/*   r2 = location for mem reads */
+
+	ldr	r0, =INITMEM_DATA
+	ldr	r1, _TEXT_BASE
+	sub	r0, r0, r1
+	add	r1, r0, #112
+
+mem_loop:
+	cmp	r1, r0
+	moveq	pc, r9		@ Done
+
+	ldr	r3, [r0], #4	@ Fetch Destination Register Address, or 1 for delay
+	ldr	r4, [r0], #4	@ value
+
+	cmp	r3, #DO_MEM_DELAY
+	bleq	mem_delay
+	beq	mem_loop
+	cmp	r3, #DO_MEM_READ
+	ldreq	r2, [r4]
+	beq	mem_loop
+	str	r4, [r3]	@ normal register/ram store
+	b	mem_loop
+
+mem_delay:
+	ldr	r5, =TIMER1_BASE
+	mov	r6, r4, LSR #1	@ timer resolution is ~2us
+	str	r6, [r5]
+	mov	r6, #0x88	@ using 508.469KHz clock, enable
+	str	r6, [r5, #8]
+0:	ldr	r6, [r5, #4]	@ timer value
+	cmp	r6, #0
+	bne	0b
+	mov	r6, #0		@ disable timer
+	str	r6, [r5, #8]
+	mov	pc, lr
+
+	.ltorg
+/* the literal pools origin */
+
+INITMEM_DATA:
+	.word	BCR0
+	.word	BCR0_FLASH
+	.word	BCR6
+	.word	BCR6_CPLD_SLOW
+	.word	BCR7
+	.word	BCR7_CPLD_FAST
+	.word	SDCSCX_BASE
+	.word	(SDCSCX_RAS2CAS_3 | SDCSCX_CASLAT_3 | SDCSCX_SROMLL | SDCSCX_4BNK | SDCSCX_EBW_32)
+	.word	GBLCNFG
+	.word	GC_CMD_NOP
+	.word	DO_MEM_DELAY
+	.word	200
+	.word	GBLCNFG
+	.word	GC_CMD_PRECHARGEALL
+	.word	RFSHTMR
+	.word	RFSHTMR_INIT
+	.word	DO_MEM_DELAY
+	.word	8
+	.word	RFSHTMR
+	.word	RFSHTMR_NORMAL
+	.word	GBLCNFG
+	.word	GC_CMD_MODE
+	.word	DO_MEM_READ
+	.word	(SDRAM_BASE | SDRAM_DEVICE_MODE)
+	.word	GBLCNFG
+	.word	GC_CMD_NORMAL
+	.word	SDCSCX_BASE
+	.word	(SDCSCX_AUTOPC | SDCSCX_RAS2CAS_3 | SDCSCX_CASLAT_3 | SDCSCX_SROMLL | SDCSCX_4BNK | SDCSCX_EBW_32)
diff --git a/board/lpd7a40x/u-boot.lds b/board/lpd7a40x/u-boot.lds
new file mode 100644
index 0000000..719d8b1
--- /dev/null
+++ b/board/lpd7a40x/u-boot.lds
@@ -0,0 +1,56 @@
+/*
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+/*OUTPUT_FORMAT("elf32-arm", "elf32-arm", "elf32-arm")*/
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+	. = 0x00000000;
+
+	. = ALIGN(4);
+	.text      :
+	{
+	  cpu/lh7a40x/start.o	(.text)
+	  *(.text)
+	}
+
+	. = ALIGN(4);
+	.rodata : { *(.rodata) }
+
+	. = ALIGN(4);
+	.data : { *(.data) }
+
+	. = ALIGN(4);
+	.got : { *(.got) }
+
+	__u_boot_cmd_start = .;
+	.u_boot_cmd : { *(.u_boot_cmd) }
+	__u_boot_cmd_end = .;
+
+	. = ALIGN(4);
+	__bss_start = .;
+	.bss : { *(.bss) }
+	_end = .;
+}
diff --git a/common/cmd_jffs2.c b/common/cmd_jffs2.c
index 085781f..207c211 100644
--- a/common/cmd_jffs2.c
+++ b/common/cmd_jffs2.c
@@ -126,7 +126,13 @@ do_jffs2_fsload(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
     int jffs2_1pass_load(char *, struct part_info *,const char *);
     char *fsname;
 
-	char *filename = "uImage";
+	char *filename;
+
+	/* pre-set Boot file name */
+	if ((filename = getenv("bootfile")) == NULL) {
+		filename = "uImage";
+	}
+
 	ulong offset = load_addr;
 	int size;
 	struct part_info *part;
diff --git a/cpu/lh7a40x/Makefile b/cpu/lh7a40x/Makefile
new file mode 100644
index 0000000..b45bd6a
--- /dev/null
+++ b/cpu/lh7a40x/Makefile
@@ -0,0 +1,43 @@
+#
+# (C) Copyright 2000, 2001, 2002
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(CPU).a
+
+START	= start.o
+OBJS	= cpu.o speed.o interrupts.o serial.o
+
+all:	.depend $(START) $(LIB)
+
+$(LIB):	$(OBJS)
+	$(AR) crv $@ $(OBJS)
+
+#########################################################################
+
+.depend:	Makefile $(START:.o=.S) $(OBJS:.o=.c)
+		$(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
diff --git a/cpu/lh7a40x/config.mk b/cpu/lh7a40x/config.mk
new file mode 100644
index 0000000..cef7d26
--- /dev/null
+++ b/cpu/lh7a40x/config.mk
@@ -0,0 +1,27 @@
+#
+# (C) Copyright 2002
+# Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+PLATFORM_RELFLAGS += -fno-strict-aliasing  -fno-common -ffixed-r8 \
+	-mshort-load-bytes -msoft-float
+
+PLATFORM_CPPFLAGS += -mapcs-32 -march=armv4
diff --git a/cpu/lh7a40x/cpu.c b/cpu/lh7a40x/cpu.c
new file mode 100644
index 0000000..2a2b578
--- /dev/null
+++ b/cpu/lh7a40x/cpu.c
@@ -0,0 +1,183 @@
+/*
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * CPU specific code
+ */
+
+#include <common.h>
+#include <command.h>
+#include <arm920t.h>
+
+/* read co-processor 15, register #1 (control register) */
+static unsigned long read_p15_c1 (void)
+{
+	unsigned long value;
+
+	__asm__ __volatile__(
+		"mrc     p15, 0, %0, c1, c0, 0   @ read control reg\n"
+		: "=r" (value)
+		:
+		: "memory");
+
+#ifdef MMU_DEBUG
+	printf ("p15/c1 is = %08lx\n", value);
+#endif
+	return value;
+}
+
+/* write to co-processor 15, register #1 (control register) */
+static void write_p15_c1 (unsigned long value)
+{
+#ifdef MMU_DEBUG
+	printf ("write %08lx to p15/c1\n", value);
+#endif
+	__asm__ __volatile__(
+		"mcr     p15, 0, %0, c1, c0, 0   @ write it back\n"
+		:
+		: "r" (value)
+		: "memory");
+
+	read_p15_c1 ();
+}
+
+static void cp_delay (void)
+{
+	volatile int i;
+
+	/* copro seems to need some delay between reading and writing */
+	for (i = 0; i < 100; i++);
+}
+
+/* See also ARM Ref. Man. */
+#define C1_MMU		(1<<0)		/* mmu off/on */
+#define C1_ALIGN	(1<<1)		/* alignment faults off/on */
+#define C1_DC		(1<<2)		/* dcache off/on */
+#define C1_BIG_ENDIAN	(1<<7)	/* big endian off/on */
+#define C1_SYS_PROT	(1<<8)		/* system protection */
+#define C1_ROM_PROT	(1<<9)		/* ROM protection */
+#define C1_IC		(1<<12)		/* icache off/on */
+#define C1_HIGH_VECTORS	(1<<13)	/* location of vectors: low/high addresses */
+#define RESERVED_1	(0xf << 3)	/* must be 111b for R/W */
+
+int cpu_init (void)
+{
+	/*
+	 * setup up stacks if necessary
+	 */
+#ifdef CONFIG_USE_IRQ
+	DECLARE_GLOBAL_DATA_PTR;
+
+	IRQ_STACK_START = _armboot_start - CFG_MALLOC_LEN - CFG_GBL_DATA_SIZE - 4;
+	FIQ_STACK_START = IRQ_STACK_START - CONFIG_STACKSIZE_IRQ;
+#endif
+	return 0;
+}
+
+int cleanup_before_linux (void)
+{
+	/*
+	 * this function is called just before we call linux
+	 * it prepares the processor for linux
+	 *
+	 * we turn off caches etc ...
+	 */
+
+	unsigned long i;
+
+	disable_interrupts ();
+
+	/* turn off I/D-cache */
+	asm ("mrc p15, 0, %0, c1, c0, 0":"=r" (i));
+	i &= ~(C1_DC | C1_IC);
+	asm ("mcr p15, 0, %0, c1, c0, 0": :"r" (i));
+
+	/* flush I/D-cache */
+	i = 0;
+	asm ("mcr p15, 0, %0, c7, c7, 0": :"r" (i));
+	return (0);
+}
+
+int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	extern void reset_cpu (ulong addr);
+
+	disable_interrupts ();
+	reset_cpu (0);
+	/*NOTREACHED*/
+	return (0);
+}
+
+void icache_enable (void)
+{
+	ulong reg;
+
+	reg = read_p15_c1 ();
+	cp_delay ();
+	write_p15_c1 (reg | C1_IC);
+}
+
+void icache_disable (void)
+{
+	ulong reg;
+
+	reg = read_p15_c1 ();
+	cp_delay ();
+	write_p15_c1 (reg & ~C1_IC);
+}
+
+int icache_status (void)
+{
+	return (read_p15_c1 () & C1_IC) != 0;
+}
+
+#ifdef USE_920T_MMU
+/* It makes no sense to use the dcache if the MMU is not enabled */
+void dcache_enable (void)
+{
+	ulong reg;
+
+	reg = read_p15_c1 ();
+	cp_delay ();
+	write_p15_c1 (reg | C1_DC);
+}
+
+void dcache_disable (void)
+{
+	ulong reg;
+
+	reg = read_p15_c1 ();
+	cp_delay ();
+	reg &= ~C1_DC;
+	write_p15_c1 (reg);
+}
+
+int dcache_status (void)
+{
+	return (read_p15_c1 () & C1_DC) != 0;
+}
+#endif
diff --git a/cpu/lh7a40x/interrupts.c b/cpu/lh7a40x/interrupts.c
new file mode 100644
index 0000000..2ebbe56
--- /dev/null
+++ b/cpu/lh7a40x/interrupts.c
@@ -0,0 +1,326 @@
+/*
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Alex Zuepke <azu@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <arm920t.h>
+#include <lh7a40x.h>
+
+#include <asm/proc-armv/ptrace.h>
+
+extern void reset_cpu(ulong addr);
+static ulong timer_load_val = 0;
+
+/* macro to read the 16 bit timer */
+static inline ulong READ_TIMER(void)
+{
+	LH7A40X_TIMERS_PTR(timers);
+	lh7a40x_timer_t* timer = &timers->timer1;
+
+	return (timer->value & 0x0000ffff);
+}
+
+#ifdef CONFIG_USE_IRQ
+/* enable IRQ interrupts */
+void enable_interrupts (void)
+{
+	unsigned long temp;
+	__asm__ __volatile__("mrs %0, cpsr\n"
+			     "bic %0, %0, #0x80\n"
+			     "msr cpsr_c, %0"
+			     : "=r" (temp)
+			     :
+			     : "memory");
+}
+
+
+/*
+ * disable IRQ/FIQ interrupts
+ * returns true if interrupts had been enabled before we disabled them
+ */
+int disable_interrupts (void)
+{
+	unsigned long old,temp;
+	__asm__ __volatile__("mrs %0, cpsr\n"
+			     "orr %1, %0, #0xc0\n"
+			     "msr cpsr_c, %1"
+			     : "=r" (old), "=r" (temp)
+			     :
+			     : "memory");
+	return (old & 0x80) == 0;
+}
+#else
+void enable_interrupts (void)
+{
+	return;
+}
+int disable_interrupts (void)
+{
+	return 0;
+}
+#endif
+
+
+void bad_mode (void)
+{
+	panic ("Resetting CPU ...\n");
+	reset_cpu (0);
+}
+
+void show_regs (struct pt_regs *regs)
+{
+	unsigned long flags;
+	const char *processor_modes[] = {
+	"USER_26",	"FIQ_26",	"IRQ_26",	"SVC_26",
+	"UK4_26",	"UK5_26",	"UK6_26",	"UK7_26",
+	"UK8_26",	"UK9_26",	"UK10_26",	"UK11_26",
+	"UK12_26",	"UK13_26",	"UK14_26",	"UK15_26",
+	"USER_32",	"FIQ_32",	"IRQ_32",	"SVC_32",
+	"UK4_32",	"UK5_32",	"UK6_32",	"ABT_32",
+	"UK8_32",	"UK9_32",	"UK10_32",	"UND_32",
+	"UK12_32",	"UK13_32",	"UK14_32",	"SYS_32",
+	};
+
+	flags = condition_codes (regs);
+
+	printf ("pc : [<%08lx>]    lr : [<%08lx>]\n"
+		"sp : %08lx  ip : %08lx  fp : %08lx\n",
+		instruction_pointer (regs),
+		regs->ARM_lr, regs->ARM_sp, regs->ARM_ip, regs->ARM_fp);
+	printf ("r10: %08lx  r9 : %08lx  r8 : %08lx\n",
+		regs->ARM_r10, regs->ARM_r9, regs->ARM_r8);
+	printf ("r7 : %08lx  r6 : %08lx  r5 : %08lx  r4 : %08lx\n",
+		regs->ARM_r7, regs->ARM_r6, regs->ARM_r5, regs->ARM_r4);
+	printf ("r3 : %08lx  r2 : %08lx  r1 : %08lx  r0 : %08lx\n",
+		regs->ARM_r3, regs->ARM_r2, regs->ARM_r1, regs->ARM_r0);
+	printf ("Flags: %c%c%c%c",
+		flags & CC_N_BIT ? 'N' : 'n',
+		flags & CC_Z_BIT ? 'Z' : 'z',
+		flags & CC_C_BIT ? 'C' : 'c', flags & CC_V_BIT ? 'V' : 'v');
+	printf ("  IRQs %s  FIQs %s  Mode %s%s\n",
+		interrupts_enabled (regs) ? "on" : "off",
+		fast_interrupts_enabled (regs) ? "on" : "off",
+		processor_modes[processor_mode (regs)],
+		thumb_mode (regs) ? " (T)" : "");
+}
+
+void do_undefined_instruction (struct pt_regs *pt_regs)
+{
+	printf ("undefined instruction\n");
+	show_regs (pt_regs);
+	bad_mode ();
+}
+
+void do_software_interrupt (struct pt_regs *pt_regs)
+{
+	printf ("software interrupt\n");
+	show_regs (pt_regs);
+	bad_mode ();
+}
+
+void do_prefetch_abort (struct pt_regs *pt_regs)
+{
+	printf ("prefetch abort\n");
+	show_regs (pt_regs);
+	bad_mode ();
+}
+
+void do_data_abort (struct pt_regs *pt_regs)
+{
+	printf ("data abort\n");
+	show_regs (pt_regs);
+	bad_mode ();
+}
+
+void do_not_used (struct pt_regs *pt_regs)
+{
+	printf ("not used\n");
+	show_regs (pt_regs);
+	bad_mode ();
+}
+
+void do_fiq (struct pt_regs *pt_regs)
+{
+	printf ("fast interrupt request\n");
+	show_regs (pt_regs);
+	bad_mode ();
+}
+
+void do_irq (struct pt_regs *pt_regs)
+{
+	printf ("interrupt request\n");
+	show_regs (pt_regs);
+	bad_mode ();
+}
+
+static ulong timestamp;
+static ulong lastdec;
+
+int interrupt_init (void)
+{
+	LH7A40X_TIMERS_PTR(timers);
+	lh7a40x_timer_t* timer = &timers->timer1;
+
+	/* a periodic timer using the 508kHz source */
+	timer->control = (TIMER_PER | TIMER_CLK508K);
+
+	if (timer_load_val == 0) {
+		/*
+		 * 10ms period with 508.469kHz clock = 5084
+		 */
+		timer_load_val = CFG_HZ/100;
+	}
+
+	/* load value for 10 ms timeout */
+	lastdec = timer->load = timer_load_val;
+
+	/* auto load, start timer */
+	timer->control = timer->control | TIMER_EN;
+	timestamp = 0;
+
+	return (0);
+}
+
+/*
+ * timer without interrupts
+ */
+
+void reset_timer (void)
+{
+	reset_timer_masked ();
+}
+
+ulong get_timer (ulong base)
+{
+	return (get_timer_masked() - base);
+}
+
+void set_timer (ulong t)
+{
+	timestamp = t;
+}
+
+void udelay (unsigned long usec)
+{
+	ulong tmo,tmp;
+
+	/* normalize */
+	if (usec >= 1000) {
+		tmo = usec / 1000;
+		tmo *= CFG_HZ;
+		tmo /= 1000;
+	}
+	else {
+		if (usec > 1) {
+			tmo = usec * CFG_HZ;
+			tmo /= (1000*1000);
+		}
+		else
+			tmo = 1;
+	}
+
+	/* check for rollover during this delay */
+	tmp = get_timer (0);
+	if ((tmp + tmo) < tmp )
+		reset_timer_masked();  /* timer would roll over */
+	else
+		tmo += tmp;
+
+	while (get_timer_masked () < tmo);
+}
+
+void reset_timer_masked (void)
+{
+	/* reset time */
+	lastdec = READ_TIMER();
+	timestamp = 0;
+}
+
+ulong get_timer_masked (void)
+{
+	ulong now = READ_TIMER();
+
+	if (lastdec >= now) {
+		/* normal mode */
+		timestamp += (lastdec - now);
+	} else {
+		/* we have an overflow ... */
+		timestamp += ((lastdec + timer_load_val) - now);
+	}
+	lastdec = now;
+
+	return timestamp;
+}
+
+void udelay_masked (unsigned long usec)
+{
+	ulong tmo;
+
+	/* normalize */
+	if (usec >= 1000) {
+		tmo = usec / 1000;
+		tmo *= CFG_HZ;
+		tmo /= 1000;
+	}
+	else {
+		if (usec > 1) {
+			tmo = usec * CFG_HZ;
+			tmo /= (1000*1000);
+		}
+		else
+			tmo = 1;
+	}
+
+	reset_timer_masked ();
+
+	while (get_timer_masked () < tmo);
+}
+
+/*
+ * This function is derived from PowerPC code (read timebase as long long).
+ * On ARM it just returns the timer value.
+ */
+unsigned long long get_ticks(void)
+{
+	return get_timer(0);
+}
+
+/*
+ * This function is derived from PowerPC code (timebase clock frequency).
+ * On ARM it returns the number of timer ticks per second.
+ */
+ulong get_tbclk (void)
+{
+	ulong tbclk;
+
+	tbclk = timer_load_val * 100;
+
+	return tbclk;
+}
diff --git a/cpu/lh7a40x/serial.c b/cpu/lh7a40x/serial.c
new file mode 100644
index 0000000..241d568
--- /dev/null
+++ b/cpu/lh7a40x/serial.c
@@ -0,0 +1,183 @@
+/*
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include <common.h>
+#include <lh7a40x.h>
+
+#if defined(CONFIG_CONSOLE_UART1)
+# define UART_CONSOLE 1
+#elif defined(CONFIG_CONSOLE_UART2)
+# define UART_CONSOLE 2
+#elif defined(CONFIG_CONSOLE_UART3)
+# define UART_CONSOLE 3
+#else
+# error "No console configured ... "
+#endif
+
+void serial_setbrg (void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+	LH7A40X_UART_PTR(uart,UART_CONSOLE);
+	int i;
+	unsigned int reg = 0;
+
+	/*
+	 * userguide 15.1.2.4
+	 *
+	 * BAUDDIV is (UART_REF_FREQ/(16 X BAUD))-1
+	 *
+	 *   UART_REF_FREQ = external system clock input / 2 (Hz)
+	 *   BAUD is desired baudrate (bits/s)
+	 *
+	 *   NOTE: we add (divisor/2) to numerator to round for
+	 *         more precision
+	 */
+	reg = (((get_PLLCLK()/2) + ((16*gd->baudrate)/2)) / (16 * gd->baudrate)) - 1;
+	uart->brcon = reg;
+
+	for (i = 0; i < 100; i++);
+}
+
+/*
+ * Initialise the serial port with the given baudrate. The settings
+ * are always 8 data bits, no parity, 1 stop bit, no start bits.
+ *
+ */
+int serial_init (void)
+{
+	LH7A40X_UART_PTR(uart,UART_CONSOLE);
+
+	/* UART must be enabled before writing to any config registers */
+	uart->con |= (UART_EN);
+
+#ifdef CONFIG_CONSOLE_UART1
+	/* infrared disabled */
+	uart->con |= UART_SIRD;
+#endif
+	/* loopback disabled */
+	uart->con &= ~(UART_LBE);
+
+	/* modem lines and tx/rx polarities */
+	uart->con &= ~(UART_MXP | UART_TXP | UART_RXP);
+
+	/* FIFO enable, N81 */
+	uart->fcon = (UART_WLEN_8 | UART_FEN | UART_STP2_1);
+
+	/* set baudrate */
+	serial_setbrg ();
+
+	/* enable rx interrupt */
+	uart->inten |= UART_RI;
+
+	return (0);
+}
+
+/*
+ * Read a single byte from the serial port. Returns 1 on success, 0
+ * otherwise. When the function is succesfull, the character read is
+ * written into its argument c.
+ */
+int serial_getc (void)
+{
+	LH7A40X_UART_PTR(uart,UART_CONSOLE);
+
+	/* wait for character to arrive */
+	while (uart->status & UART_RXFE);
+
+	return(uart->data & 0xff);
+}
+
+#ifdef CONFIG_HWFLOW
+static int hwflow = 0; /* turned off by default */
+int hwflow_onoff(int on)
+{
+	switch(on) {
+	case 0:
+	default:
+		break; /* return current */
+	case 1:
+		hwflow = 1; /* turn on */
+		break;
+	case -1:
+		hwflow = 0; /* turn off */
+		break;
+	}
+	return hwflow;
+}
+#endif
+
+#ifdef CONFIG_MODEM_SUPPORT
+static int be_quiet = 0;
+void disable_putc(void)
+{
+	be_quiet = 1;
+}
+
+void enable_putc(void)
+{
+	be_quiet = 0;
+}
+#endif
+
+
+/*
+ * Output a single byte to the serial port.
+ */
+void serial_putc (const char c)
+{
+	LH7A40X_UART_PTR(uart,UART_CONSOLE);
+
+#ifdef CONFIG_MODEM_SUPPORT
+	if (be_quiet)
+		return;
+#endif
+
+	/* wait for room in the tx FIFO */
+	while (!(uart->status & UART_TXFE));
+
+#ifdef CONFIG_HWFLOW
+	/* Wait for CTS up */
+	while(hwflow && !(uart->status & UART_CTS));
+#endif
+
+	uart->data = c;
+
+	/* If \n, also do \r */
+	if (c == '\n')
+		serial_putc ('\r');
+}
+
+/*
+ * Test whether a character is in the RX buffer
+ */
+int serial_tstc (void)
+{
+	LH7A40X_UART_PTR(uart,UART_CONSOLE);
+
+	return(!(uart->status & UART_RXFE));
+}
+
+void
+serial_puts (const char *s)
+{
+	while (*s) {
+		serial_putc (*s++);
+	}
+}
diff --git a/cpu/lh7a40x/speed.c b/cpu/lh7a40x/speed.c
new file mode 100644
index 0000000..e80b046
--- /dev/null
+++ b/cpu/lh7a40x/speed.c
@@ -0,0 +1,83 @@
+/*
+ * (C) Copyright 2001-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2002
+ * David Mueller, ELSOFT AG, d.mueller@elsoft.ch
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <lh7a40x.h>
+
+
+/* ------------------------------------------------------------------------- */
+/* NOTE: This describes the proper use of this file.
+ *
+ * CONFIG_SYS_CLK_FREQ should be defined as the input frequency of the PLL.
+ *
+ * get_FCLK(), get_HCLK(), get_PCLK() return the clock of
+ * the specified bus in HZ.
+ */
+/* ------------------------------------------------------------------------- */
+
+ulong get_PLLCLK (void)
+{
+	return CONFIG_SYS_CLK_FREQ;
+}
+
+/* return FCLK frequency */
+ulong get_FCLK (void)
+{
+	LH7A40X_CSC_PTR (csc);
+	ulong maindiv1, maindiv2, prediv, ps;
+
+	/*
+	 * from userguide 6.1.1.2
+	 *
+	 * FCLK = ((MAINDIV1 +2) * (MAINDIV2 +2) * 14.7456MHz) /
+	 *                   ((PREDIV+2) * (2^PS))
+	 */
+	maindiv2 = (csc->clkset & CLKSET_MAINDIV2) >> 11;
+	maindiv1 = (csc->clkset & CLKSET_MAINDIV1) >> 7;
+	prediv = (csc->clkset & CLKSET_PREDIV) >> 2;
+	ps = (csc->clkset & CLKSET_PS) >> 16;
+
+	return (((maindiv2 + 2) * (maindiv1 + 2) * CONFIG_SYS_CLK_FREQ) /
+		((prediv + 2) * (1 << ps)));
+}
+
+
+/* return HCLK frequency */
+ulong get_HCLK (void)
+{
+	LH7A40X_CSC_PTR (csc);
+
+	return (get_FCLK () / ((csc->clkset & CLKSET_HCLKDIV) + 1));
+}
+
+/* return PCLK frequency */
+ulong get_PCLK (void)
+{
+	LH7A40X_CSC_PTR (csc);
+
+	return (get_HCLK () /
+		(1 << (((csc->clkset & CLKSET_PCLKDIV) >> 16) + 1)));
+}
diff --git a/cpu/lh7a40x/start.S b/cpu/lh7a40x/start.S
new file mode 100644
index 0000000..160f889
--- /dev/null
+++ b/cpu/lh7a40x/start.S
@@ -0,0 +1,426 @@
+/*
+ *  armboot - Startup Code for ARM920 CPU-core
+ *
+ *  Copyright (c) 2001	Marius Gröger <mag@sysgo.de>
+ *  Copyright (c) 2002	Alex Züpke <azu@sysgo.de>
+ *  Copyright (c) 2002	Gary Jennejohn <gj@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+#include <config.h>
+#include <version.h>
+
+
+/*
+ *************************************************************************
+ *
+ * Jump vector table as in table 3.1 in [1]
+ *
+ *************************************************************************
+ */
+
+
+.globl _start
+_start:	b       reset
+	ldr	pc, _undefined_instruction
+	ldr	pc, _software_interrupt
+	ldr	pc, _prefetch_abort
+	ldr	pc, _data_abort
+	ldr	pc, _not_used
+	ldr	pc, _irq
+	ldr	pc, _fiq
+
+_undefined_instruction:	.word undefined_instruction
+_software_interrupt:	.word software_interrupt
+_prefetch_abort:	.word prefetch_abort
+_data_abort:		.word data_abort
+_not_used:		.word not_used
+_irq:			.word irq
+_fiq:			.word fiq
+
+	.balignl 16,0xdeadbeef
+
+
+/*
+ *************************************************************************
+ *
+ * Startup Code (reset vector)
+ *
+ * do important init only if we don't start from memory!
+ * relocate armboot to ram
+ * setup stack
+ * jump to second stage
+ *
+ *************************************************************************
+ */
+
+_TEXT_BASE:
+	.word	TEXT_BASE
+
+.globl _armboot_start
+_armboot_start:
+	.word _start
+
+/*
+ * These are defined in the board-specific linker script.
+ */
+.globl _bss_start
+_bss_start:
+	.word __bss_start
+
+.globl _bss_end
+_bss_end:
+	.word _end
+
+#ifdef CONFIG_USE_IRQ
+/* IRQ stack memory (calculated at run-time) */
+.globl IRQ_STACK_START
+IRQ_STACK_START:
+	.word	0x0badc0de
+
+/* IRQ stack memory (calculated at run-time) */
+.globl FIQ_STACK_START
+FIQ_STACK_START:
+	.word 0x0badc0de
+#endif
+
+
+/*
+ * the actual reset code
+ */
+
+reset:
+	/*
+	 * set the cpu to SVC32 mode
+	 */
+	mrs	r0,cpsr
+	bic	r0,r0,#0x1f
+	orr	r0,r0,#0xd3
+	msr	cpsr,r0
+
+#define pWDTCTL		0x80001400  /* Watchdog Timer control register */
+#define pINTENC		0x8000050C  /* Interupt-Controller enable clear register */
+#define pCLKSET		0x80000420  /* clock divisor register */
+
+	/* disable watchdog, set watchdog control register to
+	 * all zeros (default reset)
+	 */
+	ldr     r0, =pWDTCTL
+	mov     r1, #0x0
+	str     r1, [r0]
+
+	/*
+	 * mask all IRQs by setting all bits in the INTENC register (default)
+	 */
+	mov	r1, #0xffffffff
+	ldr	r0, =pINTENC
+	str	r1, [r0]
+
+	/* FCLK:HCLK:PCLK = 1:2:2 */
+	/* default FCLK is 200 MHz, using 14.7456 MHz fin */
+	ldr	r0, =pCLKSET
+	ldr r1, =0x0004ee39
+@	ldr r1, =0x0005ee39	@ 1: 2: 4
+	str	r1, [r0]
+
+	/*
+	 * we do sys-critical inits only at reboot,
+	 * not when booting from ram!
+	 */
+#ifdef CONFIG_INIT_CRITICAL
+	bl	cpu_init_crit
+#endif
+
+relocate:				/* relocate U-Boot to RAM	    */
+	adr	r0, _start		/* r0 <- current position of code   */
+	ldr	r1, _TEXT_BASE		/* test if we run from flash or RAM */
+	cmp     r0, r1                  /* don't reloc during debug         */
+	beq     stack_setup
+
+	ldr	r2, _armboot_start
+	ldr	r3, _bss_start
+	sub	r2, r3, r2		/* r2 <- size of armboot            */
+	add	r2, r0, r2		/* r2 <- source end address         */
+
+copy_loop:
+	ldmia	r0!, {r3-r10}		/* copy from source address [r0]    */
+	stmia	r1!, {r3-r10}		/* copy to   target address [r1]    */
+	cmp	r0, r2			/* until source end addreee [r2]    */
+	blt	copy_loop		/* a 'ble' here actually copies     */
+					/*   four bytes of bss              */
+
+	/* Set up the stack						    */
+stack_setup:
+	ldr	r0, _TEXT_BASE		/* upper 128 KiB: relocated uboot   */
+	sub	r0, r0, #CFG_MALLOC_LEN	/* malloc area                      */
+	sub	r0, r0, #CFG_GBL_DATA_SIZE /* bdinfo                        */
+#ifdef CONFIG_USE_IRQ
+	sub	r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ)
+#endif
+	sub	sp, r0, #12		/* leave 3 words for abort-stack    */
+
+clear_bss:
+	ldr	r0, _bss_start		/* find start of bss segment        */
+	@add	r0, r0, #4		/* start at first byte of bss       */
+					/*   why inc. 4 bytes past then?    */
+	ldr	r1, _bss_end		/* stop here                        */
+	mov 	r2, #0x00000000		/* clear                            */
+
+clbss_l:str	r2, [r0]		/* clear loop...                    */
+	add	r0, r0, #4
+	cmp	r0, r1
+	bne	clbss_l
+
+	ldr	pc, _start_armboot
+
+_start_armboot:	.word start_armboot
+
+
+/*
+ *************************************************************************
+ *
+ * CPU_init_critical registers
+ *
+ * setup important registers
+ * setup memory timing
+ *
+ *************************************************************************
+ */
+
+
+cpu_init_crit:
+	/*
+	 * flush v4 I/D caches
+	 */
+	mov	r0, #0
+	mcr	p15, 0, r0, c7, c7, 0	/* flush v3/v4 cache */
+	mcr	p15, 0, r0, c8, c7, 0	/* flush v4 TLB */
+
+	/*
+	 * disable MMU stuff and caches
+	 */
+	mrc	p15, 0, r0, c1, c0, 0
+	bic	r0, r0, #0x00002300	@ clear bits 13, 9:8 (--V- --RS)
+	bic	r0, r0, #0x00000087	@ clear bits 7, 2:0 (B--- -CAM)
+	orr	r0, r0, #0x00000002	@ set bit 2 (A) Align
+	orr	r0, r0, #0x00001000	@ set bit 12 (I) I-Cache
+	orr	r0, r0, #0x40000000	@ set bit 30 (nF) notFastBus
+	mcr	p15, 0, r0, c1, c0, 0
+
+
+	/*
+	 * before relocating, we have to setup RAM timing
+	 * because memory timing is board-dependend, you will
+	 * find a memsetup.S in your board directory.
+	 */
+	mov	ip, lr
+	bl	memsetup
+	mov	lr, ip
+
+	mov	pc, lr
+
+
+/*
+ *************************************************************************
+ *
+ * Interrupt handling
+ *
+ *************************************************************************
+ */
+
+@
+@ IRQ stack frame.
+@
+#define S_FRAME_SIZE	72
+
+#define S_OLD_R0	68
+#define S_PSR		64
+#define S_PC		60
+#define S_LR		56
+#define S_SP		52
+
+#define S_IP		48
+#define S_FP		44
+#define S_R10		40
+#define S_R9		36
+#define S_R8		32
+#define S_R7		28
+#define S_R6		24
+#define S_R5		20
+#define S_R4		16
+#define S_R3		12
+#define S_R2		8
+#define S_R1		4
+#define S_R0		0
+
+#define MODE_SVC 0x13
+#define I_BIT	 0x80
+
+/*
+ * use bad_save_user_regs for abort/prefetch/undef/swi ...
+ * use irq_save_user_regs / irq_restore_user_regs for IRQ/FIQ handling
+ */
+
+	.macro	bad_save_user_regs
+	sub	sp, sp, #S_FRAME_SIZE
+	stmia	sp, {r0 - r12}			@ Calling r0-r12
+	ldr	r2, _armboot_start
+	sub	r2, r2, #(CONFIG_STACKSIZE+CFG_MALLOC_LEN)
+	sub	r2, r2, #(CFG_GBL_DATA_SIZE+8)  @ set base 2 words into abort stack
+	ldmia	r2, {r2 - r3}			@ get pc, cpsr
+	add	r0, sp, #S_FRAME_SIZE		@ restore sp_SVC
+
+	add	r5, sp, #S_SP
+	mov	r1, lr
+	stmia	r5, {r0 - r3}			@ save sp_SVC, lr_SVC, pc, cpsr
+	mov	r0, sp
+	.endm
+
+	.macro	irq_save_user_regs
+	sub	sp, sp, #S_FRAME_SIZE
+	stmia	sp, {r0 - r12}			@ Calling r0-r12
+	add     r8, sp, #S_PC
+	stmdb   r8, {sp, lr}^                   @ Calling SP, LR
+	str     lr, [r8, #0]                    @ Save calling PC
+	mrs     r6, spsr
+	str     r6, [r8, #4]                    @ Save CPSR
+	str     r0, [r8, #8]                    @ Save OLD_R0
+	mov	r0, sp
+	.endm
+
+	.macro	irq_restore_user_regs
+	ldmia	sp, {r0 - lr}^			@ Calling r0 - lr
+	mov	r0, r0
+	ldr	lr, [sp, #S_PC]			@ Get PC
+	add	sp, sp, #S_FRAME_SIZE
+	subs	pc, lr, #4			@ return & move spsr_svc into cpsr
+	.endm
+
+	.macro get_bad_stack
+	ldr	r13, _armboot_start		@ setup our mode stack
+	sub	r13, r13, #(CONFIG_STACKSIZE+CFG_MALLOC_LEN)
+	sub	r13, r13, #(CFG_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack
+
+	str	lr, [r13]			@ save caller lr / spsr
+	mrs	lr, spsr
+	str     lr, [r13, #4]
+
+	mov	r13, #MODE_SVC			@ prepare SVC-Mode
+	@ msr	spsr_c, r13
+	msr	spsr, r13
+	mov	lr, pc
+	movs	pc, lr
+	.endm
+
+	.macro get_irq_stack			@ setup IRQ stack
+	ldr	sp, IRQ_STACK_START
+	.endm
+
+	.macro get_fiq_stack			@ setup FIQ stack
+	ldr	sp, FIQ_STACK_START
+	.endm
+
+/*
+ * exception handlers
+ */
+	.align  5
+undefined_instruction:
+	get_bad_stack
+	bad_save_user_regs
+	bl 	do_undefined_instruction
+
+	.align	5
+software_interrupt:
+	get_bad_stack
+	bad_save_user_regs
+	bl 	do_software_interrupt
+
+	.align	5
+prefetch_abort:
+	get_bad_stack
+	bad_save_user_regs
+	bl 	do_prefetch_abort
+
+	.align	5
+data_abort:
+	get_bad_stack
+	bad_save_user_regs
+	bl 	do_data_abort
+
+	.align	5
+not_used:
+	get_bad_stack
+	bad_save_user_regs
+	bl 	do_not_used
+
+#ifdef CONFIG_USE_IRQ
+
+	.align	5
+irq:
+	get_irq_stack
+	irq_save_user_regs
+	bl 	do_irq
+	irq_restore_user_regs
+
+	.align	5
+fiq:
+	get_fiq_stack
+	/* someone ought to write a more effiction fiq_save_user_regs */
+	irq_save_user_regs
+	bl 	do_fiq
+	irq_restore_user_regs
+
+#else
+
+	.align	5
+irq:
+	get_bad_stack
+	bad_save_user_regs
+	bl 	do_irq
+
+	.align	5
+fiq:
+	get_bad_stack
+	bad_save_user_regs
+	bl 	do_fiq
+
+#endif
+
+	.align	5
+.globl reset_cpu
+reset_cpu:
+	bl	disable_interrupts
+
+	/* Disable watchdog */
+	ldr	r1, =pWDTCTL
+	mov	r3, #0
+	str	r3, [r1]
+
+	/* reset counter */
+	ldr	r3, =0x00001984
+	str	r3, [r1, #4]
+
+	/* Enable the watchdog */
+	mov	r3, #1
+	str	r3, [r1]
+
+_loop_forever:
+	b	_loop_forever
diff --git a/cpu/pxa/interrupts.c b/cpu/pxa/interrupts.c
index b161b74..8aec0b9 100644
--- a/cpu/pxa/interrupts.c
+++ b/cpu/pxa/interrupts.c
@@ -165,7 +165,7 @@ void reset_timer (void)
 
 ulong get_timer (ulong base)
 {
-	return get_timer_masked ();
+	return get_timer_masked () - base;
 }
 
 void set_timer (ulong t)
diff --git a/doc/README.JFFS2 b/doc/README.JFFS2
index f854984..270da90 100644
--- a/doc/README.JFFS2
+++ b/doc/README.JFFS2
@@ -8,6 +8,7 @@ The module adds three new commands.
 fsload  - load binary file from a file system image
 fsinfo  - print information about file systems
 ls      - list files in a directory
+chpart  - change active partition
 
 If you boot from a partition which is mounted writable, and you
 update your boot environment by replacing single files on that
@@ -68,9 +69,6 @@ jffs2_part_info(int part_num)
 
 TODO.
 
-	Add a new command so it's actually possible to change
-	partition.
-
 	Remove the assumption that JFFS can dereference a pointer
 	into the disk. The current code do not work with memory holes
 	or hardware with a sliding window (PCMCIA).
diff --git a/drivers/smc91111.c b/drivers/smc91111.c
index 9f9f364..8b1103b 100644
--- a/drivers/smc91111.c
+++ b/drivers/smc91111.c
@@ -61,6 +61,7 @@
 
 #include <common.h>
 #include <command.h>
+#include <config.h>
 #include "smc91111.h"
 #include <net.h>
 
@@ -78,6 +79,11 @@ static const char version[] =
 	"smc91111.c:v1.0 04/25/01 by Daris A Nevil (dnevil@snmc.com)\n";
 #endif
 
+/* Autonegotiation timeout in seconds */
+#ifndef CONFIG_SMC_AUTONEG_TIMEOUT
+#define CONFIG_SMC_AUTONEG_TIMEOUT 10
+#endif
+
 /*------------------------------------------------------------------------
  .
  . Configuration options, for the experienced user to change.
@@ -353,7 +359,7 @@ static inline void smc_wait_mmu_release_complete (void)
 */
 static void smc_reset (void)
 {
-	PRINTK2 ("%s:smc_reset\n", SMC_DEV_NAME);
+	PRINTK2 ("%s: smc_reset\n", SMC_DEV_NAME);
 
 	/* This resets the registers mostly to defaults, but doesn't
 	   affect EEPROM.  That seems unnecessary */
@@ -414,7 +420,7 @@ static void smc_reset (void)
 */
 static void smc_enable()
 {
-	PRINTK2("%s:smc_enable\n", SMC_DEV_NAME);
+	PRINTK2("%s: smc_enable\n", SMC_DEV_NAME);
 	SMC_SELECT_BANK( 0 );
 	/* see the header file for options in TCR/RCR DEFAULT*/
 	SMC_outw( TCR_DEFAULT, TCR_REG );
@@ -440,7 +446,7 @@ static void smc_enable()
 */
 static void smc_shutdown()
 {
-	PRINTK2(CARDNAME ":smc_shutdown\n");
+	PRINTK2(CARDNAME ": smc_shutdown\n");
 
 	/* no more interrupts for me */
 	SMC_SELECT_BANK( 2 );
@@ -489,7 +495,7 @@ static int smc_send_packet (volatile void *packet, int packet_length)
 	saved_pnr = SMC_inb( PN_REG );
 	saved_ptr = SMC_inw( PTR_REG );
 
-	PRINTK3 ("%s:smc_hardware_send_packet\n", SMC_DEV_NAME);
+	PRINTK3 ("%s: smc_hardware_send_packet\n", SMC_DEV_NAME);
 
 	length = ETH_ZLEN < packet_length ? packet_length : ETH_ZLEN;
 
@@ -677,7 +683,7 @@ again:
 */
 void smc_destructor()
 {
-	PRINTK2(CARDNAME ":smc_destructor\n");
+	PRINTK2(CARDNAME ": smc_destructor\n");
 }
 
 
@@ -691,7 +697,7 @@ static int smc_open (bd_t * bd)
 {
 	int i, err;
 
-	PRINTK2 ("%s:smc_open\n", SMC_DEV_NAME);
+	PRINTK2 ("%s: smc_open\n", SMC_DEV_NAME);
 
 	/* reset the hardware */
 	smc_reset ();
@@ -764,7 +770,7 @@ static int smc_rcv()
 		return 0;
 	}
 
-	PRINTK3("%s:smc_rcv\n", SMC_DEV_NAME);
+	PRINTK3("%s: smc_rcv\n", SMC_DEV_NAME);
 	/*  start reading from the start of the packet */
 	SMC_outw( PTR_READ | PTR_RCV | PTR_AUTOINC, PTR_REG );
 
@@ -860,7 +866,7 @@ static int smc_rcv()
  -----------------------------------------------------*/
 static int smc_close()
 {
-	PRINTK2("%s:smc_close\n", SMC_DEV_NAME);
+	PRINTK2("%s: smc_close\n", SMC_DEV_NAME);
 
 	/* clear everything */
 	smc_shutdown();
@@ -1222,7 +1228,7 @@ static void smc_phy_configure ()
 	word status = 0;	/*;my status = 0 */
 	int failed = 0;
 
-	PRINTK3 ("%s:smc_program_phy()\n", SMC_DEV_NAME);
+	PRINTK3 ("%s: smc_program_phy()\n", SMC_DEV_NAME);
 
 
 	/* Get the detected phy address */
@@ -1286,8 +1292,8 @@ static void smc_phy_configure ()
 	/* the link does not come up. */
 	smc_read_phy_register(PHY_AD_REG);
 
-	PRINTK2 ("%s:phy caps=%x\n", SMC_DEV_NAME, my_phy_caps);
-	PRINTK2 ("%s:phy advertised caps=%x\n", SMC_DEV_NAME, my_ad_caps);
+	PRINTK2 ("%s: phy caps=%x\n", SMC_DEV_NAME, my_phy_caps);
+	PRINTK2 ("%s: phy advertised caps=%x\n", SMC_DEV_NAME, my_ad_caps);
 
 	/* Restart auto-negotiation process in order to advertise my caps */
 	smc_write_phy_register (PHY_CNTL_REG,
@@ -1296,8 +1302,9 @@ static void smc_phy_configure ()
 	/* Wait for the auto-negotiation to complete.  This may take from */
 	/* 2 to 3 seconds. */
 	/* Wait for the reset to complete, or time out */
-	timeout = 20;		/* Wait up to 10 seconds */
+	timeout = CONFIG_SMC_AUTONEG_TIMEOUT * 2;
 	while (timeout--) {
+
 		status = smc_read_phy_register (PHY_STAT_REG);
 		if (status & PHY_STAT_ANEG_ACK) {
 			/* auto-negotiate complete */
@@ -1308,11 +1315,11 @@ static void smc_phy_configure ()
 
 		/* Restart auto-negotiation if remote fault */
 		if (status & PHY_STAT_REM_FLT) {
-			printf ("%s:PHY remote fault detected\n",
+			printf ("%s: PHY remote fault detected\n",
 				SMC_DEV_NAME);
 
 			/* Restart auto-negotiation */
-			printf ("%s:PHY restarting auto-negotiation\n",
+			printf ("%s: PHY restarting auto-negotiation\n",
 				SMC_DEV_NAME);
 			smc_write_phy_register (PHY_CNTL_REG,
 						PHY_CNTL_ANEG_EN |
@@ -1323,15 +1330,13 @@ static void smc_phy_configure ()
 	}
 
 	if (timeout < 1) {
-		printf ("%s:PHY auto-negotiate timed out\n", SMC_DEV_NAME);
-		printf ("%s:PHY auto-negotiate timed out\n", SMC_DEV_NAME);
+		printf ("%s: PHY auto-negotiate timed out\n", SMC_DEV_NAME);
 		failed = 1;
 	}
 
 	/* Fail if we detected an auto-negotiate remote fault */
 	if (status & PHY_STAT_REM_FLT) {
-		printf ("%s:PHY remote fault detected\n", SMC_DEV_NAME);
-		printf ("%s:PHY remote fault detected\n", SMC_DEV_NAME);
+		printf ("%s: PHY remote fault detected\n", SMC_DEV_NAME);
 		failed = 1;
 	}
 
@@ -1469,12 +1474,16 @@ int get_rom_mac (char *v_rom_mac)
 	return (1);
 #else
 	int i;
+	int valid_mac = 0;
+
 	SMC_SELECT_BANK (1);
 	for (i=0; i<6; i++)
 	{
 		v_rom_mac[i] = SMC_inb (ADDR0_REG + i);
+		valid_mac |= v_rom_mac[i];
 	}
-	return (1);
+
+	return (valid_mac ? 1 : 0);
 #endif
 }
 #endif /* CONFIG_DRIVER_SMC91111 */
diff --git a/include/bmp_logo.h b/include/bmp_logo.h
index 265f744..9c924b8 100644
--- a/include/bmp_logo.h
+++ b/include/bmp_logo.h
@@ -18,7 +18,7 @@ unsigned short bmp_logo_palette[] = {
 	0x0343,  0x0454,  0x0565,  0x0565,  0x0676,  0x0787,  0x0898,  0x0999,
 	0x0AAA,  0x0ABA,  0x0BCB,  0x0CCC,  0x0DDD,  0x0EEE,  0x0FFF,  0x0FB3,
 	0x0FB4,  0x0FC4,  0x0FC5,  0x0FC6,  0x0FD7,  0x0FD8,  0x0FD9,  0x0FDA,
-	0x0FEA,  0x0FEB,  0x0FEC,  0x0FFD,  0x0FFE,  0x0FFF,  0x0FFF,  
+	0x0FEA,  0x0FEB,  0x0FEC,  0x0FFD,  0x0FFE,  0x0FFF,  0x0FFF,
 };
 
 unsigned char bmp_logo_bitmap[] = {
diff --git a/include/common.h b/include/common.h
index 8a81e43..db1a114 100644
--- a/include/common.h
+++ b/include/common.h
@@ -384,12 +384,15 @@ int	prt_mpc5xxx_clks (void);
 ulong	get_OPB_freq (void);
 ulong	get_PCI_freq (void);
 #endif
-#if defined(CONFIG_S3C2400) || defined(CONFIG_S3C2410)
+#if defined(CONFIG_S3C2400) || defined(CONFIG_S3C2410) || defined(CONFIG_LH7A40X)
 ulong	get_FCLK (void);
 ulong	get_HCLK (void);
 ulong	get_PCLK (void);
 ulong	get_UCLK (void);
 #endif
+#if defined(CONFIG_LH7A40X)
+ulong	get_PLLCLK (void);
+#endif
 #if defined CONFIG_INCA_IP
 uint	incaip_get_cpuclk (void);
 #endif
diff --git a/include/configs/innokom.h b/include/configs/innokom.h
index 77439e6..f884519 100644
--- a/include/configs/innokom.h
+++ b/include/configs/innokom.h
@@ -140,6 +140,7 @@
 #define CONFIG_SMC91111_BASE		0x14000000 /* chip select 5         */
 #undef  CONFIG_SMC_USE_32_BIT		           /* 16 bit bus access     */
 #undef  CONFIG_SMC_91111_EXT_PHY		   /* we use internal phy   */
+#define CONFIG_SMC_AUTONEG_TIMEOUT	10	   /* timeout 10 seconds    */
 #undef  CONFIG_SHOW_ACTIVITY
 #define CONFIG_NET_RETRY_COUNT		10	   /* # of retries          */
 
diff --git a/include/configs/lpd7a400-10.h b/include/configs/lpd7a400-10.h
new file mode 100644
index 0000000..ecf2b5f
--- /dev/null
+++ b/include/configs/lpd7a400-10.h
@@ -0,0 +1,80 @@
+/*
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Logic LH7A400-10 card engine
+ */
+
+#ifndef __LPD7A400_10_H
+#define __LPD7A400_10_H
+
+
+#define CONFIG_ARM920T		1	/* arm920t core */
+#define CONFIG_LH7A40X		1	/* Sharp LH7A400 SoC */
+#define CONFIG_LH7A400		1
+
+/* The system clock PLL input frequency */
+#define CONFIG_SYS_CLK_FREQ		14745600   /* System Clock PLL Input (Hz) */
+
+/* ticks per second */
+#define CFG_HZ	(508469)
+
+/*-----------------------------------------------------------------------
+ * Stack sizes
+ *
+ * The stack sizes are set up in start.S using the settings below
+ */
+#define CONFIG_STACKSIZE	(128*1024)	/* regular stack */
+#ifdef CONFIG_USE_IRQ
+#define CONFIG_STACKSIZE_IRQ	(4*1024)	/* IRQ stack */
+#define CONFIG_STACKSIZE_FIQ	(4*1024)	/* FIQ stack */
+#endif
+
+/*-----------------------------------------------------------------------
+ * Physical Memory Map
+ */
+#define CONFIG_NR_DRAM_BANKS	1	   /* we have 1 bank of DRAM */
+#define PHYS_SDRAM_1		0xc0000000 /* SDRAM Bank #1 */
+#define PHYS_SDRAM_1_SIZE	0x02000000 /* 32 MB */
+
+#define CFG_FLASH_BASE		0x00000000 /* Flash Bank #1 */
+
+/*-----------------------------------------------------------------------
+ * FLASH and environment organization
+ */
+#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks */
+#define CFG_MAX_FLASH_SECT	(64)	/* max number of sectors on one chip */
+
+/* timeout values are in ticks */
+#define CFG_FLASH_ERASE_TOUT	(5*CFG_HZ) /* Timeout for Flash Erase */
+#define CFG_FLASH_WRITE_TOUT	(5*CFG_HZ) /* Timeout for Flash Write */
+
+/*----------------------------------------------------------------------
+ * Using SMC91C111 LAN chip
+ *
+ * Default IO base of chip is 0x300, Card Engine has this address lines
+ * (LAN chip) tied to Vcc, so we just care about the chip select
+ */
+#define CONFIG_DRIVER_SMC91111
+#define CONFIG_SMC91111_BASE	(0x70000000)
+#undef CONFIG_SMC_USE_32_BIT
+#define CONFIG_SMC_USE_IOFUNCS
+
+#endif  /* __LPD7A400_10_H */
diff --git a/include/configs/lpd7a400.h b/include/configs/lpd7a400.h
new file mode 100644
index 0000000..3e91536
--- /dev/null
+++ b/include/configs/lpd7a400.h
@@ -0,0 +1,114 @@
+/*
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __LPD7A400_H_
+#define __LPD7A400_H_
+
+/*
+ * If we are developing, we might want to start armboot from ram
+ * so we MUST NOT initialize critical regs like mem-timing ...
+ */
+#define CONFIG_INIT_CRITICAL	/* undef for developing */
+
+#undef CONFIG_USE_IRQ
+
+#define MACH_TYPE_LPD7A400	389
+
+/*
+ * This board uses the logic LH7A400-10 card engine
+ */
+#include <configs/lpd7a400-10.h>
+
+#define CONFIG_LPD7A400		/* Logic LH7A400 SDK */
+
+#define CONFIG_CMDLINE_TAG		1	/* enable passing of ATAGs	*/
+#define CONFIG_SETUP_MEMORY_TAGS	1
+#define CONFIG_INITRD_TAG		1
+
+/*
+ * Size of malloc() pool
+ */
+#define CFG_MALLOC_LEN		(CFG_ENV_SIZE + 128*1024)
+#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+
+/*
+ * select serial console configuration
+ */
+#define CONFIG_CONSOLE_UART2	/* UART2 LH7A40x for console */
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+
+#define CONFIG_BAUDRATE		115200
+#define CONFIG_IPADDR		192.168.1.100
+#define CONFIG_NETMASK		255.255.1.0
+#define CONFIG_SERVERIP		192.168.1.1
+
+#define	CONFIG_TIMESTAMP	1	/* Print timestamp info for images */
+
+#ifndef USE_920T_MMU
+#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_PING) & ~(CFG_CMD_CACHE))
+#else
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_DATE)
+#endif
+
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+#define CONFIG_BOOTDELAY	3
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE	115200		/* speed to run kgdb serial port */
+/* what's this ? it's not used anywhere */
+#define CONFIG_KGDB_SER_INDEX	1		/* which serial port to use */
+#endif
+
+/*
+ * Miscellaneous configurable options
+ */
+#define	CFG_LONGHELP				/* undef to save memory		*/
+#define	CFG_PROMPT		"LPD7A400> "	/* Monitor Command Prompt	*/
+#define	CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
+#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define	CFG_MAXARGS		16		/* max number of command args	*/
+#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+
+#define CFG_MEMTEST_START	0xc0300000	/* memtest works on	*/
+#define CFG_MEMTEST_END		0xc0500000	/* 2 MB in DRAM	*/
+
+#undef  CFG_CLKS_IN_HZ		/* everything, incl board info, in Hz */
+
+#define	CFG_LOAD_ADDR		0xc0f00000	/* default load address	*/
+
+/* valid baudrates */
+#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+
+/* size and location of u-boot in flash */
+#define CFG_MONITOR_BASE	CFG_FLASH_BASE
+#define CFG_MONITOR_LEN		(256<<10)
+
+#define	CFG_ENV_IS_IN_FLASH	1
+
+/* Address and size of Primary Environment Sector	*/
+#define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0xFC0000)
+#define CFG_ENV_SIZE		0x40000
+
+#endif  /* __LPD7A400_H_ */
diff --git a/include/lh7a400.h b/include/lh7a400.h
new file mode 100644
index 0000000..e43667d
--- /dev/null
+++ b/include/lh7a400.h
@@ -0,0 +1,93 @@
+/*
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * lh7a400 SoC interface
+ */
+
+#ifndef __LH7A400_H__
+#define __LH7A400_H__
+
+#include "lh7a40x.h"
+
+/* Interrupt Controller (userguide 8.2.1) */
+typedef struct {
+	volatile u32  intsr;
+	volatile u32  intrsr;
+	volatile u32  intens;
+	volatile u32  intenc;
+	volatile u32  rsvd1;
+	volatile u32  rsvd2;
+	volatile u32  rsvd3;
+} /*__attribute__((__packed__))*/ lh7a400_interrupt_t;
+#define LH7A400_INTERRUPT_BASE    (0x80000500)
+#define LH7A400_INTERRUPT_PTR(name)  lh7a400_interrupt_t* name = (lh7a400_interrupt_t*) LH7A400_INTERRUPT_BASE
+
+/* (DMA) Direct Memory Access Controller (userguide 9.2.1) */
+typedef struct {
+	volatile u32  maxcnt;
+	volatile u32  base;
+	volatile u32  current;
+	volatile u32  rsvd1;
+} lh7a400_dmabuf_t;
+
+typedef struct {
+	volatile u32      control;
+	volatile u32      interrupt;
+	volatile u32      rsvd1;
+	volatile u32      status;
+	volatile u32      rsvd2;
+	volatile u32      remain;
+	volatile u32      rsvd3;
+	volatile u32      rsvd4;
+	lh7a400_dmabuf_t  buf[2];
+} /*__attribute__((__packed__))*/ lh7a400_dmachan_t;
+
+typedef struct {
+	lh7a400_dmachan_t  chan[15];
+	volatile u32       glblint;
+	volatile u32       rsvd1;
+	volatile u32       rsvd2;
+	volatile u32       rsvd3;
+} /*__attribute__((__packed__))*/ lh7a400_dma_t;
+#define LH7A400_DMA_BASE      (0x80002800)
+#define DMA_USBTX_OFFSET      (0x000)
+#define DMA_USBRX_OFFSET      (0x040)
+#define DMA_MMCTX_OFFSET      (0x080)
+#define DMA_MMCRX_OFFSET      (0x0C0)
+#define DMA_AC97_BASE         (0x80002A00)
+
+#define LH7A400_DMA_PTR(name)    lh7a400_dma_t* name = (lh7a400_dma_t*) LH7A400_DMA_BASE
+#define LH7A400_DMA_USBTX(name) \
+	lh7a400_dmachan_t* name = (lh7a400_dmachan_t*) (LH7A400_DMA_BASE + DMA_USBTX_OFFSET)
+#define LH7A400_DMA_USBRX(name) \
+	lh7a400_dmachan_t* name = (lh7a400_dmachan_t*) (LH7A400_DMA_BASE + DMA_USBRX_OFFSET)
+#define LH7A400_DMA_MMCTX(name) \
+	lh7a400_dmachan_t* name = (lh7a400_dmachan_t*) (LH7A400_DMA_BASE + DMA_MMCTX_OFFSET)
+#define LH7A400_DMA_MMCRX(name) \
+	lh7a400_dmachan_t* name = (lh7a400_dmachan_t*) (LH7A400_DMA_BASE + DMA_MMCRX_OFFSET)
+#define LH7A400_AC97RX(name,n) \
+	lh7a400_dmachan_t* name = (lh7a400_dmachan_t*) (LH7A400_AC97_BASE + \
+	((2*n) * sizeof(lh7a400_dmachan_t)))
+#define LH7A400_AC97TX(name,n) \
+	lh7a400_dmachan_t* name = (lh7a400_dmachan_t*) (LH7A400_AC97_BASE + \
+	(((2*n)+1) * sizeof(lh7a400_dmachan_t)))
+
+#endif  /* __LH7A400_H__ */
diff --git a/include/lh7a40x.h b/include/lh7a40x.h
new file mode 100644
index 0000000..081009c
--- /dev/null
+++ b/include/lh7a40x.h
@@ -0,0 +1,258 @@
+/*
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * lh7a40x SoC series common interface
+ */
+
+#ifndef __LH7A40X_H__
+#define __LH7A40X_H__
+
+/* (SMC) Static Memory Controller (usersguide 4.2.1) */
+typedef struct {
+	volatile u32  attib;
+	volatile u32  com;
+	volatile u32  io;
+	volatile u32  rsvd1;
+} /*__attribute__((__packed__))*/ lh7a40x_pccard_t;
+
+typedef struct {
+	volatile u32      bcr[8];
+	lh7a40x_pccard_t  pccard[2];
+	volatile u32	  pcmciacon;
+} /*__attribute__((__packed__))*/ lh7a40x_smc_t;
+#define LH7A40X_SMC_BASE    (0x80002000)
+#define LH7A40X_SMC_PTR(name)  lh7a40x_smc_t* name = (lh7a40x_smc_t*) LH7A40X_SMC_BASE
+
+/* (SDMC) Synchronous Dynamic Ram Controller (usersguide 5.3.1) */
+typedef struct {
+	volatile u32  rsvd1;
+	volatile u32  gblcnfg;
+	volatile u32  rfshtmr;
+	volatile u32  bootstat;
+	volatile u32  sdcsc[4];
+} /*__attribute__((__packed__))*/ lh7a40x_sdmc_t;
+#define LH7A40X_SDMC_BASE    (0x80002400)
+#define LH7A40X_SDMC_PTR(name)  lh7a40x_sdmc_t* name = (lh7a40x_sdmc_t*) LH7A40X_SDMC_BASE
+
+/* (CSC) Clock and State Controller (userguide 6.2.1) */
+typedef struct {
+	volatile u32  pwrsr;
+	volatile u32  pwrcnt;
+	volatile u32  halt;
+	volatile u32  stby;
+	volatile u32  bleoi;
+	volatile u32  mceoi;
+	volatile u32  teoi;
+	volatile u32  stfclr;
+	volatile u32  clkset;
+	volatile u32  scrreg[2];
+	volatile u32  rsvd1;
+	volatile u32  usbreset;
+} /*__attribute__((__packed__))*/ lh7a40x_csc_t;
+#define LH7A40X_STPWR_BASE  (0x80000400)
+#define LH7A40X_CSC_PTR(name)  lh7a40x_csc_t* name = (lh7a40x_csc_t*) LH7A40X_STPWR_BASE
+
+#define CLKSET_SMCROM		(0x01000000)
+#define CLKSET_PS		(0x000C0000)
+#define CLKSET_PS_0		(0x00000000)
+#define CLKSET_PS_1		(0x00040000)
+#define CLKSET_PS_2		(0x00080000)
+#define CLKSET_PS_3		(0x000C0000)
+#define CLKSET_PCLKDIV		(0x00030000)
+#define CLKSET_PCLKDIV_2	(0x00000000)
+#define CLKSET_PCLKDIV_4	(0x00010000)
+#define CLKSET_PCLKDIV_8	(0x00020000)
+#define CLKSET_MAINDIV2		(0x0000f800)
+#define CLKSET_MAINDIV1		(0x00000780)
+#define CLKSET_PREDIV		(0x0000007C)
+#define CLKSET_HCLKDIV		(0x00000003)
+
+/* (WDT) Watchdog Timer (userguide 11.2.1) */
+typedef struct {
+	volatile u32  ctl;
+	volatile u32  rst;
+	volatile u32  status;
+	volatile u32  count[4];
+} /*__attribute__((__packed__))*/ lh7a40x_wdt_t;
+#define LH7A40X_WDT_BASE    (0x80001400)
+#define LH7A40X_WDT_PTR(name)  lh7a40x_wdt_t* name = (lh7a40x_wdt_t*) LH7A40X_WDT_BASE
+
+/* (RTC) Real Time Clock (lh7a400 userguide 12.2.1, lh7a404 userguide 13.2.1) */
+typedef struct {
+	volatile u32  rtcdr;
+	volatile u32  rtclr;
+	volatile u32  rtcmr;
+	volatile u32  unk1;
+	volatile u32  rtcstat_eoi;
+	volatile u32  rtccr;
+	volatile u32  rsvd1[58];
+} /*__attribute__((__packed__))*/ lh7a40x_rtc_t;
+#define LH7A40X_RTC_BASE    (0x80000D00)
+#define LH7A40X_RTC_PTR(name)  lh7a40x_rtc_t* name = (lh7a40x_rtc_t*) LH7A40X_RTC_BASE
+
+/* Timers (lh7a400 userguide 13.2.1, lh7a404 userguide 11.2.1) */
+typedef struct {
+	volatile u32  load;
+	volatile u32  value;
+	volatile u32  control;
+	volatile u32  tceoi;
+} /*__attribute__((__packed__))*/ lh7a40x_timer_t;
+
+typedef struct {
+	lh7a40x_timer_t  timer1;
+	volatile u32     rsvd1[4];
+	lh7a40x_timer_t  timer2;
+	volatile u32     unk1[4];
+	volatile u32     bzcon;
+	volatile u32     unk2[15];
+	lh7a40x_timer_t  timer3;
+	/*volatile u32     rsvd2;*/
+} /*__attribute__((__packed__))*/ lh7a40x_timers_t;
+#define LH7A40X_TIMERS_BASE    (0x80000C00)
+#define LH7A40X_TIMERS_PTR(name)  lh7a40x_timers_t* name = (lh7a40x_timers_t*) LH7A40X_TIMERS_BASE
+
+#define TIMER_EN	(0x00000080)
+#define TIMER_PER	(0x00000040)
+#define TIMER_FREE	(0x00000000)
+#define TIMER_CLK508K	(0x00000008)
+#define TIMER_CLK2K	(0x00000000)
+
+/* (SSP) Sychronous Serial Ports (lh7a400 userguide 14.2.1, lh7a404 userguide 14.2.1) */
+typedef struct {
+	volatile u32  cr0;
+	volatile u32  cr1;
+	volatile u32  irr_roeoi;
+	volatile u32  dr;
+	volatile u32  cpr;
+	volatile u32  sr;
+	/*volatile u32  rsvd1[58];*/
+} /*__attribute__((__packed__))*/ lh7a40x_ssp_t;
+#define LH7A40X_SSP_BASE    (0x80000B00)
+#define LH7A40X_SSP_PTR(name)  lh7a40x_ssp_t* name = (lh7a40x_ssp_t*) LH7A40X_SSP_BASE
+
+/* (UART) Universal Asychronous Receiver/Transmitter (lh7a400 userguide 15.2.1, lh7a404 userguide 15.2.1) */
+typedef struct {
+	volatile u32  data;
+	volatile u32  fcon;
+	volatile u32  brcon;
+	volatile u32  con;
+	volatile u32  status;
+	volatile u32  rawisr;
+	volatile u32  inten;
+	volatile u32  isr;
+	volatile u32  rsvd1[56];
+} /*__attribute__((__packed__))*/ lh7a40x_uart_t;
+#define LH7A40X_UART_BASE      (0x80000600)
+#define LH7A40X_UART_PTR(name,n) \
+	lh7a40x_uart_t* name = (lh7a40x_uart_t*) (LH7A40X_UART_BASE + ((n-1) * sizeof(lh7a40x_uart_t)))
+
+#define UART_BE		(0x00000800)      /* the rx error bits */
+#define UART_OE		(0x00000400)
+#define UART_PE		(0x00000200)
+#define UART_FE		(0x00000100)
+
+#define UART_WLEN	(0x00000060)	/* fcon bits */
+#define UART_WLEN_8	(0x00000060)
+#define UART_WLEN_7	(0x00000040)
+#define UART_WLEN_6	(0x00000020)
+#define UART_WLEN_5	(0x00000000)
+#define UART_FEN	(0x00000010)
+#define UART_STP2	(0x00000008)
+#define UART_STP2_2	(0x00000008)
+#define UART_STP2_1	(0x00000000)
+#define UART_EPS	(0x00000004)
+#define UART_EPS_EVEN	(0x00000004)
+#define UART_EPS_ODD	(0x00000000)
+#define UART_PEN	(0x00000002)
+#define UART_BRK	(0x00000001)
+
+#define UART_BAUDDIV	(0x0000ffff)	/* brcon bits */
+
+#define UART_SIRBD	(0x00000080)	/* con bits */
+#define UART_LBE	(0x00000040)
+#define UART_MXP	(0x00000020)
+#define UART_TXP	(0x00000010)
+#define UART_RXP	(0x00000008)
+#define UART_SIRLP	(0x00000004)
+#define UART_SIRD	(0x00000002)
+#define UART_EN		(0x00000001)
+
+#define UART_TXFE	(0x00000080)	/* status bits */
+#define UART_RXFF	(0x00000040)
+#define UART_TXFF	(0x00000020)
+#define UART_RXFE	(0x00000010)
+#define UART_BUSY	(0x00000008)
+#define UART_DCD	(0x00000004)
+#define UART_DSR	(0x00000002)
+#define UART_CTS	(0x00000001)
+
+#define UART_MSEOI	(0xfffffff0)	/* rawisr interrupt bits */
+
+#define UART_RTI	(0x00000008)	/* generic interrupt bits */
+#define UART_MI		(0x00000004)
+#define UART_TI		(0x00000002)
+#define UART_RI		(0x00000001)
+
+/* (GPIO) General Purpose IO and External Interrupts (userguide 16.2.1) */
+typedef struct {
+	volatile u32  pad;
+	volatile u32  pbd;
+	volatile u32  pcd;
+	volatile u32  pdd;
+	volatile u32  padd;
+	volatile u32  pbdd;
+	volatile u32  pcdd;
+	volatile u32  pddd;
+	volatile u32  ped;
+	volatile u32  pedd;
+	volatile u32  kbdctl;
+	volatile u32  pinmux;
+	volatile u32  pfd;
+	volatile u32  pfdd;
+	volatile u32  pgd;
+	volatile u32  pgdd;
+	volatile u32  phd;
+	volatile u32  phdd;
+	volatile u32  rsvd1;
+	volatile u32  inttype1;
+	volatile u32  inttype2;
+	volatile u32  gpiofeoi;
+	volatile u32  gpiointen;
+	volatile u32  intstatus;
+	volatile u32  rawintstatus;
+	volatile u32  gpiodb;
+	volatile u32  papd;
+	volatile u32  pbpd;
+	volatile u32  pcpd;
+	volatile u32  pdpd;
+	volatile u32  pepd;
+	volatile u32  pfpd;
+	volatile u32  pgpd;
+	volatile u32  phpd;
+} /*__attribute__((__packed__))*/ lh7a40x_gpioint_t;
+#define LH7A40X_GPIOINT_BASE    (0x80000E00)
+#define LH7A40X_GPIOINT_PTR(name)  lh7a40x_gpioint_t* name = (lh7a40x_gpioint_t*) LH7A40X_GPIOINT_BASE
+
+/* Embedded SRAM */
+#define CFG_SRAM_BASE	(0xB0000000)
+#define CFG_SRAM_SIZE	(80*1024)	/* 80kB */
+
+#endif  /* __LH7A40X_H__ */
diff --git a/include/lpd7a400_cpld.h b/include/lpd7a400_cpld.h
new file mode 100644
index 0000000..c70af09
--- /dev/null
+++ b/include/lpd7a400_cpld.h
@@ -0,0 +1,195 @@
+/*
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Logic lh7a400-10 Card Engine CPLD interface
+ */
+
+#ifndef __LPD7A400_CPLD_H_
+#define __LPD7A400_CPLD_H_
+
+
+/*
+ * IO Controller Address and Register Definitions
+ *   - using LH7A400-10 Card Engine IO Controller Specification
+ *     (logic PN: 70000079)
+ */
+
+/*------------------------------------------------------------------
+ * Slow Peripherals (nCS6)
+ */
+#define LPD7A400_CPLD_CF		(0x60200000)
+#define LPD7A400_CPLD_ISA		(0x60400000)
+
+/*------------------------------------------------------------------
+ * Fast Peripherals (nCS7)
+ *
+ * The CPLD directs access to 0x70000000-0x701fffff to the onboard
+ * ethernet controller
+ */
+#define LPD7A400_CPLD_WLAN_BASE		(0x70000000)
+
+/* All registers are 8 bit */
+#define LPD7A400_CPLD_CECTL_REG		(0x70200000)
+#define LPD7A400_CPLD_SPIDATA_REG	(0x70600000)
+#define LPD7A400_CPLD_SPICTL_REG	(0x70800000)
+#define LPD7A400_CPLD_EEPSPI_REG	(0x70a00000)
+#define LPD7A400_CPLD_INTMASK_REG	(0x70c00000)
+#define LPD7A400_CPLD_MODE_REG		(0x70e00000)
+#define LPD7A400_CPLD_FLASH_REG		(0x71000000)
+#define LPD7A400_CPLD_PWRMG_REG		(0x71200000)
+#define LPD7A400_CPLD_REV_REG		(0x71400000)
+#define LPD7A400_CPLD_EXTGPIO_REG	(0x71600000)
+#define LPD7A400_CPLD_GPIODATA_REG	(0x71800000)
+#define LPD7A400_CPLD_GPIODIR_REG	(0x71a00000)
+
+#define LPD7A400_CPLD_REGPTR		(volatile u8*)
+
+/* Card Engine Control Register (section 3.1.2) */
+#define CECTL_SWINT	(0x80)	/* Software settable interrupt source
+				   (routed to uP PF3)
+				   0 = generate interrupt, 1 = do not */
+#define CECTL_OCMSK	(0x40)	/* USB1 connection interrupt mask
+				   0 = not masked, 1 = masked */
+#define CECTL_PDRV	(0x20)	/* PCC_nDRV output
+				   0 = active, 1 = inactive */
+#define CECTL_USB1C	(0x10)	/* USB1 connection interrupt
+				   0 = active, 1 = inactive */
+#define CECTL_USB1P	(0x08)  /* USB1 Power enable
+				   0 = enabled, 1 = disabled */
+#define CECTL_AWKP	(0x04)  /* Auto-Wakeup enable
+				   0 = enabled, 1 = disabled */
+#define CECTL_LCDV	(0x02)  /* LCD VEE enable
+				   0 = disabled, 1 = enabled */
+#define CECTL_WLPE	(0x01)  /* Wired LAN power enable
+				   0 = enabled, 1 = disabled */
+
+/* SPI Control Register (section 3.1.5) */
+#define SPICTL_SPLD	(0x20)	/* SPI load (R)
+				   0 = data reg. has not been loaded, shift
+				       count has not been reset
+				   1 = data reg. loaded, shift count reset */
+#define SPICTL_SPST	(0x10)  /* SPI start (RW)
+				   0 = don't load data reg. and reset shift count
+				   1 = ready to load data reg and reset shift count */
+#define SPICTL_SPDN	(0x08)  /* SPI done (R)
+				   0 = not done
+				   1 = access done */
+#define SPICTL_SPRW	(0x04)  /* SPI read/write (RW)
+				   0 = SPI write access
+				   1 = SPI read access */
+#define SPICTL_STCS	(0x02)  /* SPI touch chip select (RW)
+				   0 = not selected
+				   1 = selected */
+#define SPICTL_SCCS	(0x01)  /* SPI CODEC chip select (RW) {not used}
+				   0 = not selected
+				   1 = selected */
+
+/* EEPROM SPI Interface Register (section 3.1.6) */
+#define EEPSPI_EECS	(0x08)	/* EEPROM chip select (RW)
+				   0 = not selected
+				   1 = selected */
+#define EEPSPI_EECK	(0x04)	/* EEPROM SPI clock (RW) */
+#define EEPSPI_EETX	(0x02)  /* EEPROM SPI tx data (RW) */
+#define EEPSPI_EERX	(0x01)  /* EEPROM SPI rx data (R) */
+
+/* Interrupt/Mask Register (section 3.1.7) */
+#define INTMASK_CMSK	(0x80)  /* CPLD_nIRQD interrupt mask (RW)
+				   0 = not masked
+				   1 = masked */
+#define INTMASK_CIRQ	(0x40)	/* interrupt signal to CPLD (R)
+				   0 = interrupt active
+				   1 = no interrupt */
+#define INTMASK_PIRQ	(0x10)	/* legacy, no effect */
+#define INTMASK_TMSK	(0x08)	/* Touch chip interrupt mask (RW)
+				   0 = not masked
+				   1 = masked */
+#define INTMASK_WMSK	(0x04)  /* Wired LAN interrupt mask (RW)
+				   0 = not masked
+				   1 = masked */
+#define INTMASK_TIRQ	(0x02)  /* Touch chip interrupt request (R)
+				   0 = interrupt active
+				   1 = no interrupt */
+#define INTMASK_WIRQ	(0x01)  /* Wired LAN interrupt request (R)
+				   0 = interrupt active
+				   1 = no interrupt */
+
+/* Mode Register (section 3.1.8) */
+#define MODE_VS1	(0x80)  /* PCMCIA Voltage Sense 1 input (PCC_VS1) (R)
+				   0 = active slot VS1 pin is low
+				   1 = active slot VS1 pin is high */
+#define MODE_CD2	(0x40)  /* PCMCIA Card Detect 2 input (PCC_nCD2) (R)
+				   0 = active slot CD2 is low
+				   1 = active slot CD2 is high */
+#define MODE_IOIS16	(0x20)  /* PCMCIA IOIS16 input (PCC_nIOIS16) (R)
+				   0 = 16 bit access area
+				   1 = 8 bit access area */
+#define MODE_CD1	(0x10)  /* PCMCIA Card Detect 1 input (PCC_nCD1) (R)
+				   0 = active slot CD1 is low
+				   1 = active slot CD1 is high */
+#define MODE_upMODE3	(0x08)  /* Mode Pin 3 (R)
+				   0 = off-board boot device
+				   1 = on-board boot device (flash) */
+#define MODE_upMODE2	(0x04)  /* Mode Pin 2 (R) (LH7A400 Little Endian only)
+				   0 = big endian
+				   1 = little endian */
+#define MODE_upMODE1	(0x02)  /* Mode Pin 1 and Mode Pin 2 (R) */
+#define MODE_upMODE0	(0x01)  /*   - bus width at boot */
+
+
+/* Flash Register (section 3.1.9) */
+#define FLASH_FPOP	(0x08)	/* Flash populated (RW)
+				   0 = populated, 1 = not */
+#define FLASH_FST2	(0x04)  /* Flash status (R) (RY/BY# pin for upper 16 bit chip
+				   0 = busy, 1 = ready */
+#define FLASH_FST1	(0x02)  /* Flash status (R) (RY/BY# pin for lower 16 bit chip
+				   0 = busy, 1 = ready */
+#define FLASH_FPEN	(0x01)  /* Flash program enable (RW)
+				   0 = flash write protected
+				   1 = programming enabled */
+
+/* Power Management Register (section 3.1.10)
+ *    - when either of these is low an unmaskable interrupt to cpu
+ *      is generated
+ */
+#define PWRMG_STBY	(0x10)  /* state of nSTANDBY signal to CPLD (R)
+				   0 = low, 1 = high */
+#define PWRMG_SPND	(0x04)  /* state of nSUSPEND signal to CPLD (R)
+				   0 = low, 1 = high */
+
+
+/* Extended GPIO Register (section 3.1.12) */
+#define EXTGPIO_STATUS1	(0x04)  /* Status 1 output (RW) (uP_STATUS_1)
+				   0 = set pin low, 1 = set pin high */
+#define EXTGPIO_STATUS2 (0x02)  /* Status 2 output (RW) (uP_STATUS_2)
+				   0 = set pin low, 1 = set pin high */
+#define EXTGPIO_GPIO1	(0x01)  /* General purpose output (RW) (CPLD_GPIO_1)
+				   0 = set pin low, 1 = set pin high */
+
+/* GPIO Data Register (section 3.1.13) */
+#define GPIODATA_GPIO2	(0x01)  /* General purpose input/output (RW) (CPLD_GPIO_2)
+				   0 = set low (output) / read low (input)
+				   1 = set high (output) / read high (input) */
+
+/* GPIO Direction Register (section 3.1.14) */
+#define GPIODIR_GPDR0	(0x01)  /* GPIO2 direction (RW)
+				   0 = output, 1 = input */
+
+#endif  /* __LH7A400_H__ */
diff --git a/lib_arm/board.c b/lib_arm/board.c
index 193980e..bba944a 100644
--- a/lib_arm/board.c
+++ b/lib_arm/board.c
@@ -32,6 +32,13 @@
 #include <version.h>
 #include <net.h>
 
+#ifdef CONFIG_DRIVER_SMC91111
+#include "../drivers/smc91111.h"
+#endif
+#ifdef CONFIG_DRIVER_LAN91C96
+#include "../drivers/lan91c96.h"
+#endif
+
 #if (CONFIG_COMMANDS & CFG_CMD_NAND)
 void nand_init (void);
 #endif
@@ -58,9 +65,6 @@ extern void cs8900_get_enetaddr (uchar * addr);
 extern void rtl8019_get_enetaddr (uchar * addr);
 #endif
 
-#ifdef CONFIG_DRIVER_LAN91C96
-#include "../drivers/lan91c96.h"
-#endif
 /*
  * Begin and End of memory area for malloc(), and current "brk"
  */
@@ -302,11 +306,12 @@ void start_armboot (void)
 	cs8900_get_enetaddr (gd->bd->bi_enetaddr);
 #endif
 
-#ifdef CONFIG_DRIVER_LAN91C96
+#if defined(CONFIG_DRIVER_SMC91111) || defined (CONFIG_DRIVER_LAN91C96)
 	if (getenv ("ethaddr")) {
 		smc_set_mac_addr(gd->bd->bi_enetaddr);
 	}
-#endif /* CONFIG_DRIVER_LAN91C96 */
+	eth_init(gd->bd);
+#endif /* CONFIG_DRIVER_SMC91111 || CONFIG_DRIVER_LAN91C96 */
 
 	/* Initialize from environment */
 	if ((s = getenv ("loadaddr")) != NULL) {