Minor coding style cleanup. Update CHANGELOG.

Signed-off-by: Wolfgang Denk <wd@denx.de>

9 files changed, 86 insertions, 46 deletions

diff --git a/CHANGELOG b/CHANGELOG
index 1228908..57299b6 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -1,3 +1,53 @@
+commit a08458303e7f9db67f296980036d3292c35cb45c
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date:	Fri Jun 29 18:38:51 2007 +0200
+
+    atmel_mci: Fix data timeout value
+
+    Calculate the data timeout based on values from the CSD instead of
+    just using a hardcoded DTOR value. This is a backport of a similar fix
+    in BSP 2.0, with one additional fix: the DTOCYC value is rounded up
+    instead of down.
+
+    Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 0ba8eed28b575626b17e0a7882f923b83e0d7584
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date:	Mon Aug 13 17:22:31 2007 +0200
+
+    AVR32: Include <div64.h> instead of <asm/div64.h>
+
+    include/asm-avr32/div64.h was recently moved to include/div64.h, but
+    cpu/at32ap/interrupts.c wasn't properly updated (an earlier version of
+    the patch was merged perhaps?)
+
+    This patch updates cpu/at32ap/interrupts.c so that the avr32 port
+    compiles again.
+
+    Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit f0d1246ed7cb5a88522244c596d7ae7e6f161283
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date:	Wed Jun 27 13:34:26 2007 +0200
+
+    atmel_mci: Use 512 byte blocksize if possible
+
+    Instead of always using the largest blocksize the card supports, check
+    if it can support smaller block sizes and use 512 bytes if possible.
+    Most cards do support this, and other parts of u-boot seem to have
+    trouble with block sizes different from 512 bytes.
+
+    Also enable underrun/overrun protection.
+
+    Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+    Acked-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
+
+commit 9986bc3e40e899bea372a99a2bca4071bdf2e24b
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Sun Aug 12 21:34:50 2007 +0200
+
+    Update CHANGELOG
+
 commit 77d19a8bf3b0b1e401cb9f23c81e2ef419705c1a
 Author: Wolfgang Denk <wd@denx.de>
 Date:	Sun Aug 12 21:34:34 2007 +0200
@@ -3928,6 +3978,30 @@ Date:	Fri Jan 5 09:15:34 2007 +0100
 
     Signed-off-by Dan Malek, <dan@embeddedalley.com>
 
+commit f2134f8e9eb006bdcd729e89f309c07b2fa45180
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date:	Wed May 2 13:31:53 2007 +0200
+
+    macb: Don't restart autonegotiation if we already have link
+
+    Rework macb_phy_init so that it doesn't attempt to re-negotiate if the
+    link is already up.
+
+    Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 04fcb5d38bc90779cd9a710d60702075986f0e29
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date:	Wed May 2 13:22:38 2007 +0200
+
+    macb: Introduce a few barriers when dealing with DMA descriptors
+
+    There were a few theoretical possibilities that the compiler might
+    optimize away DMA descriptor reads and/or writes and thus cause
+    synchronization problems with the hardware. Insert barriers where
+    we depend on reads/writes actually hitting memory.
+
+    Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
 commit ffa621a0d12a1ccd81c936c567f8917a213787a8
 Author: Andy Fleming <afleming@freescale.com>
 Date:	Sat Feb 24 01:08:13 2007 -0600
diff --git a/board/cm5200/cm5200.c b/board/cm5200/cm5200.c
index 6804e33..b74ac08 100644
--- a/board/cm5200/cm5200.c
+++ b/board/cm5200/cm5200.c
@@ -122,7 +122,7 @@ long int initdram(int board_type)
 	mem_conf_t *mem_conf;
 
 	mem_conf = get_mem_config(board_type);
-	
+
 	/* configure SDRAM start/end for detection */
 	*(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x0000001e; /* 2G at 0x0 */
 
@@ -303,7 +303,7 @@ int checkboard(void)
 	hw_id_t hw_id_tmp;
 	char module_name_tmp[MODULE_NAME_MAXLEN] = "";
 
-	/* 
+	/*
 	 * We need I2C to access HW ID data from EEPROM, so we call i2c_init()
 	 * here despite the fact that it will be called again later on. We
 	 * also use a little trick to silence I2C-related output.
@@ -321,7 +321,7 @@ int checkboard(void)
 	else
 		printf("Board: unrecognized cm5200 module (%s)\n",
 			module_name_tmp);
-	
+
 	return 0;
 }
 
diff --git a/board/cm5200/cm5200.h b/board/cm5200/cm5200.h
index a6cbc88..b2ea5ce 100644
--- a/board/cm5200/cm5200.h
+++ b/board/cm5200/cm5200.h
@@ -138,7 +138,7 @@ static char **hw_id_list[] = {
 	cmu1_qa_hw_id,
 };
 
-/* indices to the above list - keep in sync */ 
+/* indices to the above list - keep in sync */
 enum {
 	CM1_QA,
 	CM11_QA,
diff --git a/board/cm5200/cmd_cm5200.c b/board/cm5200/cmd_cm5200.c
index fd9b914..513c365 100644
--- a/board/cm5200/cmd_cm5200.c
+++ b/board/cm5200/cmd_cm5200.c
@@ -1,7 +1,7 @@
 /*
  * (C) Copyright 2007 Markus Kappeler <markus.kappeler@objectxp.com>
  *
- * Adapted for U-Boot 1.2 by Piotr Kruszynski <ppk@semihalf.com> 
+ * Adapted for U-Boot 1.2 by Piotr Kruszynski <ppk@semihalf.com>
  *
  * See file CREDITS for list of people who contributed to this
  * project.
diff --git a/doc/README.generic_usb_ohci b/doc/README.generic_usb_ohci
index c343dfd..494dd1f 100644
--- a/doc/README.generic_usb_ohci
+++ b/doc/README.generic_usb_ohci
@@ -41,7 +41,7 @@ mpc5xxx. For these the config option
 
 	CFG_OHCI_BE_CONTROLLER
 
-needs to be defined. 
+needs to be defined.
 
 
 PCI Controllers
@@ -55,6 +55,3 @@ PCI Controllers need to do byte swapping on register accesses, so they
 should to define:
 
 	CFG_OHCI_SWAP_REG_ACCESS
-
-
-
diff --git a/drivers/nand/nand_util.c b/drivers/nand/nand_util.c
index aee8727..cf05043 100644
--- a/drivers/nand/nand_util.c
+++ b/drivers/nand/nand_util.c
@@ -209,7 +209,7 @@ int nand_erase_opts(nand_info_t *meminfo, const nand_erase_options_t *opts)
 		}
 
 		if (!opts->quiet) {
-                        unsigned long long n =(unsigned long long)
+			unsigned long long n =(unsigned long long)
 				 (erase.addr+meminfo->erasesize-opts->offset)
 				 * 100;
 			int percent = (int)do_div(n, erase_length);
@@ -476,8 +476,8 @@ int nand_write_opts(nand_info_t *meminfo, const nand_write_options_t *opts)
 		imglen -= readlen;
 
 		if (!opts->quiet) {
-                        unsigned long long n = (unsigned long long)
-			         (opts->length-imglen) * 100;
+			unsigned long long n = (unsigned long long)
+				 (opts->length-imglen) * 100;
 			int percent = (int)do_div(n, opts->length);
 			/* output progress message only at whole percent
 			 * steps to reduce the number of messages printed
@@ -651,8 +651,8 @@ int nand_read_opts(nand_info_t *meminfo, const nand_read_options_t *opts)
 		}
 
 		if (!opts->quiet) {
-                        unsigned long long n = (unsigned long long)
-			         (opts->length-imglen) * 100;
+			unsigned long long n = (unsigned long long)
+				 (opts->length-imglen) * 100;
 			int percent = (int)do_div(n ,opts->length);
 			/* output progress message only at whole percent
 			 * steps to reduce the number of messages printed
diff --git a/drivers/usb_ohci.c b/drivers/usb_ohci.c
index d6b745f..f0a37b2 100644
--- a/drivers/usb_ohci.c
+++ b/drivers/usb_ohci.c
@@ -132,8 +132,6 @@ int got_rhsc;
 /* device which was disconnected */
 struct usb_device *devgone;
 
-
-
 /*-------------------------------------------------------------------------*/
 
 /* AMD-756 (D2 rev) reports corrupt register contents in some cases.
@@ -157,7 +155,6 @@ static inline u32 roothub_status (struct ohci *hc)
 static u32 roothub_portstatus (struct ohci *hc, int i)
 	{ return read_roothub (hc, portstatus [i], 0xffe0fce0); }
 
-
 /* forward declaration */
 static int hc_interrupt (void);
 static void
@@ -412,8 +409,6 @@ static void ohci_dump (ohci_t *controller, int verbose)
 		ep_print_int_eds (controller, "hcca");
 	dbg ("hcca frame #%04x", controller->hcca->frame_no);
 	ohci_dump_roothub (controller, 1);
-}
-
 
 #endif /* DEBUG */
 
@@ -701,7 +696,6 @@ static void periodic_unlink ( struct ohci *ohci, volatile struct ed *ed,
 	}
 }
 
-
 /* unlink an ed from one of the HC chains.
  * just the link to the ed is unlinked.
  * the link from the ed still points to another operational ed or 0
@@ -759,7 +753,6 @@ static int ep_unlink (ohci_t *ohci, ed_t *edi)
 	return 0;
 }
 
-
 /*-------------------------------------------------------------------------*/
 
 /* add/reinit an endpoint; this should be done once at the
@@ -939,7 +932,6 @@ static void td_submit_job (struct usb_device *dev, unsigned long pipe, void *buf
  * Done List handling functions
  *-------------------------------------------------------------------------*/
 
-
 /* calculate the transfer length and update the urb */
 
 static void dl_transfer_length(td_t * td)
@@ -951,7 +943,6 @@ static void dl_transfer_length(td_t * td)
 	tdBE   = m32_swap (td->hwBE);
 	tdCBP  = m32_swap (td->hwCBP);
 
-
 	if (!(usb_pipetype (lurb_priv->pipe) == PIPE_CONTROL &&
 	    ((td->index == 0) || (td->index == lurb_priv->length - 1)))) {
 		if (tdBE != 0) {
@@ -1094,7 +1085,6 @@ static __u8 root_hub_dev_des[] =
 	0x01	    /*	__u8  bNumConfigurations; */
 };
 
-
 /* Configuration descriptor */
 static __u8 root_hub_config_des[] =
 {
@@ -1172,7 +1162,6 @@ static unsigned char root_hub_str_index1[] =
 
 /* Hub class-specific descriptor is constructed dynamically */
 
-
 /*-------------------------------------------------------------------------*/
 
 #define OK(x)			len = (x); break
diff --git a/include/configs/cm5200.h b/include/configs/cm5200.h
index 56c0ecb..d554348 100644
--- a/include/configs/cm5200.h
+++ b/include/configs/cm5200.h
@@ -31,7 +31,6 @@
 #define CONFIG_MPC5200		1	/* (more precisely an MPC5200 CPU) */
 #define CONFIG_CM5200		1	/* ... on CM5200 platform */
 
-
 /*
  * Supported commands
  */
@@ -60,7 +59,6 @@
 #define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 #define CONFIG_SILENT_CONSOLE	1	/* needed to silence i2c_init() */
 
-
 /*
  * Ethernet configuration
  */
@@ -71,7 +69,6 @@
 #define CONFIG_MISC_INIT_R	1
 #define CONFIG_MAC_OFFSET	0x35	/* MAC address offset in I2C EEPROM */
 
-
 /*
  * POST support
  */
@@ -80,11 +77,9 @@
 /* List of I2C addresses to be verified by POST */
 #define I2C_ADDR_LIST		{ CFG_I2C_SLAVE, CFG_I2C_IO, CFG_I2C_EEPROM }
 
-
 /* display image timestamps */
 #define CONFIG_TIMESTAMP	1
 
-
 /*
  * Autobooting
  */
@@ -137,19 +132,16 @@
 	""
 #define CONFIG_BOOTCOMMAND	"run flash_flash"
 
-
 /*
  * Low level configuration
  */
 
-
 /*
  * Clock configuration
  */
 #define CFG_MPC5XXX_CLKIN	33000000	/* SYS_XTAL_IN = 33MHz */
 #define CFG_IPBCLK_EQUALS_XLBCLK	1	/* IPB = 133MHz */
 
-
 /*
  * Memory map
  */
@@ -184,7 +176,7 @@
  */
 #define CFG_FLASH_CFI		1
 #define CFG_FLASH_CFI_DRIVER	1
-#define CFG_FLASH_BASE		0xfc000000	
+#define CFG_FLASH_BASE		0xfc000000
 /* we need these despite using CFI */
 #define CFG_MAX_FLASH_BANKS	1	/* max num of flash banks */
 #define CFG_MAX_FLASH_SECT	256	/* max num of sectors on one chip */
@@ -215,7 +207,6 @@
 #define CFG_CS_BURST		0x00000000
 #define CFG_CS_DEADCYCLE	0x00000001
 
-
 /*
  * SDRAM configuration
  * settings for k4s561632E-xx75, assuming XLB = 132 MHz
@@ -225,8 +216,6 @@
 #define SDRAM_CONFIG1	0xE2333900
 #define SDRAM_CONFIG2	0x8EE70000
 
-
-
 /*
  * MTD configuration
  */
@@ -238,7 +227,6 @@
 					"2m(kernel),27904k(rootfs),"	\
 					"-(config)"
 
-
 /*
  * I2C configuration
  */
@@ -249,13 +237,11 @@
 #define CFG_I2C_IO		0x38	/* PCA9554AD I2C I/O port address */
 #define CFG_I2C_EEPROM		0x53	/* I2C EEPROM device address */
 
-
 /*
  * RTC configuration
  */
 #define CONFIG_RTC_MPC5200	1	/* use internal MPC5200 RTC */
 
-
 /*
  * USB configuration
  */
@@ -284,7 +270,6 @@
 #define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR + CFG_ENV_SECT_SIZE)
 #define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
 
-
 /*
  * Pin multiplexing configuration
  */
@@ -302,7 +287,6 @@
  */
 #define CFG_GPS_PORT_CONFIG	0x10559C44
 
-
 /*
  * Miscellaneous configurable options
  */
@@ -322,7 +306,6 @@
 #define CFG_LOAD_ADDR		0x100000	/* default load address */
 #define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */
 
-
 /*
  * Various low-level settings
  */
@@ -334,7 +317,6 @@
 
 #define CFG_XLB_PIPELINING	1	/* enable transaction pipeling */
 
-
 /*
  * Cache Configuration
  */
@@ -343,7 +325,6 @@
 #define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
 #endif
 
-
 /*
  * Flat Device Tree support
  */
diff --git a/libfdt/fdt_ro.c b/libfdt/fdt_ro.c
index ffd9209..46d525d 100644
--- a/libfdt/fdt_ro.c
+++ b/libfdt/fdt_ro.c
@@ -534,4 +534,3 @@ int fdt_get_reservemap(void *fdt, int n, struct fdt_reserve_entry *re)
 }
 
 #endif /* CONFIG_OF_LIBFDT */
-