Merge http://www.denx.de/git/u-boot

6 files changed, 43 insertions, 33 deletions

diff --git a/board/amcc/sequoia/sequoia.c b/board/amcc/sequoia/sequoia.c
index b2b82c7..daaffe0 100644
--- a/board/amcc/sequoia/sequoia.c
+++ b/board/amcc/sequoia/sequoia.c
@@ -336,6 +336,10 @@ int misc_init_r(void)
 	}
 #endif /* CONFIG_440EPX */
 
+	mfsdr(SDR0_SRST1, reg);		/* enable security/kasumi engines */
+	reg &= ~(SDR0_SRST1_CRYP0 | SDR0_SRST1_KASU0);
+	mtsdr(SDR0_SRST1, reg);
+
 	/*
 	 * Clear PLB4A0_ACR[WRP]
 	 * This fix will make the MAL burst disabling patch for the Linux
diff --git a/board/esd/plu405/plu405.c b/board/esd/plu405/plu405.c
index 37b92fb..59171f8 100644
--- a/board/esd/plu405/plu405.c
+++ b/board/esd/plu405/plu405.c
@@ -215,12 +215,6 @@ int checkboard (void)
 	}
 
 	putc ('\n');
-
-	/*
-	 * Disable sleep mode in LXT971
-	 */
-	lxt971_no_sleep();
-
 	return 0;
 }
 
@@ -292,3 +286,14 @@ void board_auto_update_show(int au_active)
 	}
 }
 #endif
+
+void reset_phy(void)
+{
+#ifdef CONFIG_LXT971_NO_SLEEP
+
+	/*
+	 * Disable sleep mode in LXT971
+	 */
+	lxt971_no_sleep();
+#endif
+}
diff --git a/common/cmd_i2c.c b/common/cmd_i2c.c
index 45cfde2..34571ee 100644
--- a/common/cmd_i2c.c
+++ b/common/cmd_i2c.c
@@ -701,6 +701,7 @@ int do_sdram  ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	switch(data[2]) {
 		case 2:  puts ("EDO\n");	break;
 		case 4:  puts ("SDRAM\n");	break;
+		case 8:  puts ("DDR2\n");	break;
 		default: puts ("unknown\n");	break;
 	}
 	puts ("Row address bits             ");
@@ -722,6 +723,7 @@ int do_sdram  ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 		case 2:  puts ("HSTL 1.5\n");	break;
 		case 3:  puts ("SSTL 3.3\n");	break;
 		case 4:  puts ("SSTL 2.5\n");	break;
+		case 5:  puts ("SSTL 1.8\n");	break;
 		default: puts ("unknown\n");	break;
 	}
 	printf("SDRAM cycle time             %d.%d nS\n",
@@ -948,6 +950,26 @@ int do_i2c(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 
 /***************************************************/
 
+#if defined(CONFIG_I2C_CMD_TREE)
+U_BOOT_CMD(
+	i2c, 6, 1, do_i2c,
+ 	"i2c     - I2C sub-system\n",
+#if defined(CONFIG_I2C_MULTI_BUS)
+	"dev [dev] - show or set current I2C bus\n"
+#endif  /* CONFIG_I2C_MULTI_BUS */
+	"i2c speed [speed] - show or set I2C bus speed\n"
+	"i2c md chip address[.0, .1, .2] [# of objects] - read from I2C device\n"
+	"i2c mm chip address[.0, .1, .2] - write to I2C device (auto-incrementing)\n"
+	"i2c mw chip address[.0, .1, .2] value [count] - write to I2C device (fill)\n"
+	"i2c nm chip address[.0, .1, .2] - write to I2C device (constant address)\n"
+	"i2c crc32 chip address[.0, .1, .2] count - compute CRC32 checksum\n"
+	"i2c probe - show devices on the I2C bus\n"
+	"i2c loop chip address[.0, .1, .2] [# of objects] - looping read of device\n"
+#if (CONFIG_COMMANDS & CFG_CMD_SDRAM)
+	"i2c sdram chip - print SDRAM configuration information\n"
+#endif  /* CFG_CMD_SDRAM */
+);
+#else /* CONFIG_I2C_CMD_TREE */
 U_BOOT_CMD(
 	imd,	4,	1,	do_i2c_md,		\
 	"imd     - i2c memory display\n",				\
@@ -1002,26 +1024,6 @@ U_BOOT_CMD(
 	"      (valid chip values 50..57)\n"
 );
 #endif
-
-#if defined(CONFIG_I2C_CMD_TREE)
-U_BOOT_CMD(
-	i2c, 6, 1, do_i2c,
- 	"i2c     - I2C sub-system\n",
-#if defined(CONFIG_I2C_MULTI_BUS)
-	"dev [dev] - show or set current I2C bus\n"
-#endif  /* CONFIG_I2C_MULTI_BUS */
-	"i2c speed [speed] - show or set I2C bus speed\n"
-	"i2c md chip address[.0, .1, .2] [# of objects] - read from I2C device\n"
-	"i2c mm chip address[.0, .1, .2] - write to I2C device (auto-incrementing)\n"
-	"i2c mw chip address[.0, .1, .2] value [count] - write to I2C device (fill)\n"
-	"i2c nm chip address[.0, .1, .2] - write to I2C device (constant address)\n"
-	"i2c crc32 chip address[.0, .1, .2] count - compute CRC32 checksum\n"
-	"i2c probe - show devices on the I2C bus\n"
-	"i2c loop chip address[.0, .1, .2] [# of objects] - looping read of device\n"
-#if (CONFIG_COMMANDS & CFG_CMD_SDRAM)
-	"i2c sdram chip - print SDRAM configuration information\n"
-#endif  /* CFG_CMD_SDRAM */
-);
 #endif  /* CONFIG_I2C_CMD_TREE */
 
 #endif	/* CFG_CMD_I2C */
diff --git a/cpu/ppc4xx/i2c.c b/cpu/ppc4xx/i2c.c
index 0b056a1..8f4da86 100644
--- a/cpu/ppc4xx/i2c.c
+++ b/cpu/ppc4xx/i2c.c
@@ -460,6 +460,7 @@ int i2c_set_bus_num(unsigned int bus)
 
 	return 0;
 }
+#endif	/* CONFIG_I2C_MULTI_BUS */
 
 /* TODO: add 100/400k switching */
 unsigned int i2c_get_bus_speed(void)
@@ -474,5 +475,4 @@ int i2c_set_bus_speed(unsigned int speed)
 
 	return 0;
 }
-#endif	/* CONFIG_I2C_MULTI_BUS */
 #endif	/* CONFIG_HARD_I2C */
diff --git a/include/configs/PLU405.h b/include/configs/PLU405.h
index dd5d831..d02c39b 100644
--- a/include/configs/PLU405.h
+++ b/include/configs/PLU405.h
@@ -51,17 +51,13 @@
 
 #define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
-#if 0 /* test-only */
 #define CONFIG_NET_MULTI	1
+#undef  CONFIG_HAS_ETH1
 
 #define CONFIG_MII		1	/* MII PHY management		*/
 #define CONFIG_PHY_ADDR		0	/* PHY address			*/
-#define CONFIG_PHY1_ADDR	1	/* PHY address			*/
-#else
-#define CONFIG_MII		1	/* MII PHY management		*/
-#define CONFIG_PHY_ADDR		0	/* PHY address			*/
-#endif
 #define CONFIG_LXT971_NO_SLEEP  1       /* disable sleep mode in LXT971 */
+#define CONFIG_RESET_PHY_R      1       /* use reset_phy() to disable phy sleep mode */
 
 #define CONFIG_PHY_CLK_FREQ	EMAC_STACR_CLK_66MHZ /* 66 MHz OPB clock*/
 
diff --git a/include/i2c.h b/include/i2c.h
index d31c72d..6e6c845 100644
--- a/include/i2c.h
+++ b/include/i2c.h
@@ -63,6 +63,9 @@
 #if !defined(CFG_DTT_BUS_NUM)
 #define CFG_DTT_BUS_NUM		0
 #endif
+#if !defined(CFG_SPD_BUS_NUM)
+#define CFG_SPD_BUS_NUM		0
+#endif
 
 /*
  * Initialization, must be called once on start up, may be called