summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorWolfgang Denk <wd@denx.de>2008-09-01 00:06:05 +0200
committerWolfgang Denk <wd@denx.de>2008-09-01 00:06:05 +0200
commita13b2d937941f6b525abfcfad96c034f94421188 (patch)
tree56e5bdaf62397b2f8cc2be9b17a035d9b059bf8a
parente155c9e00b5f21a6de28479259c440ba71289d00 (diff)
parentd6e04258be8f2408845468d3cf722a4cf0433445 (diff)
downloadu-boot-imx-a13b2d937941f6b525abfcfad96c034f94421188.zip
u-boot-imx-a13b2d937941f6b525abfcfad96c034f94421188.tar.gz
u-boot-imx-a13b2d937941f6b525abfcfad96c034f94421188.tar.bz2
Merge branch 'master' of git://git.denx.de/u-boot-arm
-rw-r--r--MAINTAINERS1
-rwxr-xr-xMAKEALL1
-rw-r--r--Makefile19
-rw-r--r--board/davinci/common/Makefile53
-rw-r--r--board/davinci/common/misc.c126
-rw-r--r--board/davinci/common/misc.h32
-rw-r--r--board/davinci/common/psc.c117
-rw-r--r--board/davinci/common/psc.h (renamed from board/integratorap/memsetup.S)27
-rw-r--r--board/davinci/dv-evm/dv_board.c202
-rw-r--r--board/davinci/dvevm/Makefile (renamed from board/davinci/dv-evm/Makefile)2
-rw-r--r--board/davinci/dvevm/board_init.S (renamed from board/davinci/dv-evm/board_init.S)0
-rw-r--r--board/davinci/dvevm/config.mk (renamed from board/davinci/dv-evm/config.mk)0
-rw-r--r--board/davinci/dvevm/dvevm.c103
-rw-r--r--board/davinci/dvevm/u-boot.lds (renamed from board/davinci/dv-evm/u-boot.lds)0
-rw-r--r--board/davinci/schmoogie/Makefile2
-rw-r--r--board/davinci/schmoogie/schmoogie.c (renamed from board/davinci/schmoogie/dv_board.c)103
-rw-r--r--board/davinci/sffsdr/sffsdr.c158
-rw-r--r--board/davinci/sonata/Makefile2
-rw-r--r--board/davinci/sonata/dv_board.c199
-rw-r--r--board/davinci/sonata/sonata.c97
-rw-r--r--board/integratorap/Makefile2
-rw-r--r--board/integratorcp/Makefile2
-rw-r--r--board/samsung/smdk6400/.gitignore5
-rw-r--r--board/samsung/smdk6400/Makefile54
-rw-r--r--board/samsung/smdk6400/config.mk30
-rw-r--r--board/samsung/smdk6400/lowlevel_init.S316
-rw-r--r--board/samsung/smdk6400/smdk6400.c130
-rw-r--r--board/samsung/smdk6400/u-boot-nand.lds62
-rw-r--r--cpu/arm1176/Makefile50
-rw-r--r--cpu/arm1176/config.mk35
-rw-r--r--cpu/arm1176/cpu.c188
-rw-r--r--cpu/arm1176/s3c64xx/Makefile49
-rw-r--r--cpu/arm1176/s3c64xx/config.mk34
-rw-r--r--cpu/arm1176/s3c64xx/cpu_init.S142
-rw-r--r--cpu/arm1176/s3c64xx/interrupts.c174
-rw-r--r--cpu/arm1176/s3c64xx/speed.c145
-rw-r--r--cpu/arm1176/s3c64xx/usb.c (renamed from board/integratorcp/memsetup.S)32
-rw-r--r--cpu/arm1176/start.S469
-rw-r--r--cpu/arm926ejs/davinci/dp83848.c24
-rw-r--r--cpu/arm926ejs/davinci/ether.c114
-rw-r--r--cpu/arm926ejs/davinci/lxt972.c20
-rw-r--r--drivers/mtd/nand/Makefile1
-rw-r--r--drivers/mtd/nand/s3c64xx.c319
-rw-r--r--drivers/serial/Makefile1
-rw-r--r--drivers/serial/s3c64xx.c172
-rw-r--r--drivers/usb/usb_ohci.c1
-rw-r--r--include/asm-arm/arch-davinci/emac_defs.h4
-rw-r--r--include/asm-arm/arch-s3c64xx/hardware.h63
-rw-r--r--include/common.h3
-rw-r--r--include/configs/smdk6400.h307
-rw-r--r--include/s3c6400.h894
-rw-r--r--include/s3c64x0.h90
-rw-r--r--lib_arm/board.c4
-rw-r--r--nand_spl/board/samsung/smdk6400/Makefile106
-rw-r--r--nand_spl/board/samsung/smdk6400/config.mk40
-rw-r--r--nand_spl/board/samsung/smdk6400/u-boot.lds61
-rw-r--r--net/eth.c4
57 files changed, 4638 insertions, 753 deletions
diff --git a/MAINTAINERS b/MAINTAINERS
index b5f3458..3f16dab 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -531,6 +531,7 @@ Prakash Kumar <prakash@embedx.com>
Guennadi Liakhovetski <g.liakhovetski@gmx.de>
mx31ads i.MX31
+ SMDK6400 S3C6400
David Müller <d.mueller@elsoft.ch>
diff --git a/MAKEALL b/MAKEALL
index ff47cf5..fe284b5 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -519,6 +519,7 @@ LIST_ARM11=" \
imx31_litekit \
imx31_phycore \
mx31ads \
+ smdk6400 \
"
#########################################################################
diff --git a/Makefile b/Makefile
index b185503..18b851d 100644
--- a/Makefile
+++ b/Makefile
@@ -2495,7 +2495,7 @@ cp1026_config: unconfig
@board/integratorcp/split_by_variant.sh $@
davinci_dvevm_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm926ejs dv-evm davinci davinci
+ @$(MKCONFIG) $(@:_config=) arm arm926ejs dvevm davinci davinci
davinci_schmoogie_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm926ejs schmoogie davinci davinci
@@ -2758,6 +2758,23 @@ mx31ads_config : unconfig
omap2420h4_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm1136 omap2420h4 NULL omap24xx
+#########################################################################
+## ARM1176 Systems
+#########################################################################
+smdk6400_noUSB_config \
+smdk6400_config : unconfig
+ @mkdir -p $(obj)include $(obj)board/samsung/smdk6400
+ @mkdir -p $(obj)nand_spl/board/samsung/smdk6400
+ @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
+ @if [ -z "$(findstring smdk6400_noUSB_config,$@)" ]; then \
+ echo "RAM_TEXT = 0x57e00000" >> $(obj)board/samsung/smdk6400/config.tmp;\
+ $(MKCONFIG) $(@:_config=) arm arm1176 smdk6400 samsung s3c64xx; \
+ else \
+ echo "RAM_TEXT = 0xc7e00000" >> $(obj)board/samsung/smdk6400/config.tmp;\
+ $(MKCONFIG) $(@:_noUSB_config=) arm arm1176 smdk6400 samsung s3c64xx; \
+ fi
+ @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
+
#========================================================================
# i386
#========================================================================
diff --git a/board/davinci/common/Makefile b/board/davinci/common/Makefile
new file mode 100644
index 0000000..127bb6e
--- /dev/null
+++ b/board/davinci/common/Makefile
@@ -0,0 +1,53 @@
+#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)board/$(VENDOR)/common)
+endif
+
+LIB = $(obj)lib$(VENDOR).a
+
+COBJS := psc.o misc.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+# This is for $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/davinci/common/misc.c b/board/davinci/common/misc.c
new file mode 100644
index 0000000..71a3b87
--- /dev/null
+++ b/board/davinci/common/misc.c
@@ -0,0 +1,126 @@
+/*
+ * Miscelaneous DaVinci functions.
+ *
+ * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
+ * Copyright (C) 2008 Lyrtech <www.lyrtech.com>
+ * Copyright (C) 2004 Texas Instruments.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <common.h>
+#include <i2c.h>
+#include <asm/arch/hardware.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int dram_init(void)
+{
+ gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+ gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+
+ return(0);
+}
+
+static int dv_get_pllm_output(uint32_t pllm)
+{
+ return (pllm + 1) * (CFG_HZ_CLOCK / 1000000);
+}
+
+void dv_display_clk_infos(void)
+{
+ printf("ARM Clock: %dMHz\n", dv_get_pllm_output(REG(PLL1_PLLM)) / 2);
+ printf("DDR Clock: %dMHz\n", dv_get_pllm_output(REG(PLL2_PLLM)) /
+ ((REG(PLL2_DIV2) & 0x1f) + 1) / 2);
+}
+
+/* Read ethernet MAC address from EEPROM for DVEVM compatible boards.
+ * Returns 1 if found, 0 otherwise.
+ */
+int dvevm_read_mac_address(uint8_t *buf)
+{
+#ifdef CFG_I2C_EEPROM_ADDR
+ /* Read MAC address. */
+ if (i2c_read(CFG_I2C_EEPROM_ADDR, 0x7F00, CFG_I2C_EEPROM_ADDR_LEN,
+ (uint8_t *) &buf[0], 6))
+ goto i2cerr;
+
+ /* Check that MAC address is not null. */
+ if (memcmp(buf, "\0\0\0\0\0\0", 6) == 0)
+ goto err;
+
+ return 1; /* Found */
+
+i2cerr:
+ printf("Read from EEPROM @ 0x%02x failed\n", CFG_I2C_EEPROM_ADDR);
+err:
+#endif /* CFG_I2C_EEPROM_ADDR */
+
+ return 0;
+}
+
+/* If there is a MAC address in the environment, and if it is not identical to
+ * the MAC address in the ROM, then a warning is printed and the MAC address
+ * from the environment is used.
+ *
+ * If there is no MAC address in the environment, then it will be initialized
+ * (silently) from the value in the ROM.
+ */
+void dv_configure_mac_address(uint8_t *rom_enetaddr)
+{
+ int i;
+ u_int8_t env_enetaddr[6];
+ char *tmp = getenv("ethaddr");
+ char *end;
+
+ /* Read Ethernet MAC address from the U-Boot environment.
+ * If it is not defined, env_enetaddr[] will be cleared. */
+ for (i = 0; i < 6; i++) {
+ env_enetaddr[i] = tmp ? simple_strtoul(tmp, &end, 16) : 0;
+ if (tmp)
+ tmp = (*end) ? end+1 : end;
+ }
+
+ /* Check if ROM and U-Boot environment MAC addresses match. */
+ if (memcmp(env_enetaddr, "\0\0\0\0\0\0", 6) != 0 &&
+ memcmp(env_enetaddr, rom_enetaddr, 6) != 0) {
+ printf("Warning: MAC addresses don't match:\n");
+ printf(" ROM MAC address: %02X:%02X:%02X:%02X:%02X:%02X\n",
+ rom_enetaddr[0], rom_enetaddr[1],
+ rom_enetaddr[2], rom_enetaddr[3],
+ rom_enetaddr[4], rom_enetaddr[5]);
+ printf(" \"ethaddr\" value: %02X:%02X:%02X:%02X:%02X:%02X\n",
+ env_enetaddr[0], env_enetaddr[1],
+ env_enetaddr[2], env_enetaddr[3],
+ env_enetaddr[4], env_enetaddr[5]) ;
+ debug("### Using MAC address from environment\n");
+ }
+ if (!tmp) {
+ char ethaddr[20];
+
+ /* There is no MAC address in the environment, so we initialize
+ * it from the value in the ROM. */
+ sprintf(ethaddr, "%02X:%02X:%02X:%02X:%02X:%02X",
+ rom_enetaddr[0], rom_enetaddr[1],
+ rom_enetaddr[2], rom_enetaddr[3],
+ rom_enetaddr[4], rom_enetaddr[5]) ;
+ debug("### Setting environment from ROM MAC address = \"%s\"\n",
+ ethaddr);
+ setenv("ethaddr", ethaddr);
+ }
+}
diff --git a/board/davinci/common/misc.h b/board/davinci/common/misc.h
new file mode 100644
index 0000000..4a57dbb
--- /dev/null
+++ b/board/davinci/common/misc.h
@@ -0,0 +1,32 @@
+/*
+ * Copyright (C) 2008 Lyrtech <www.lyrtech.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __MISC_H
+#define __MISC_H
+
+extern void timer_init(void);
+extern int eth_hw_init(void);
+
+void dv_display_clk_infos(void);
+int dvevm_read_mac_address(uint8_t *buf);
+void dv_configure_mac_address(uint8_t *rom_enetaddr);
+
+#endif /* __MISC_H */
diff --git a/board/davinci/common/psc.c b/board/davinci/common/psc.c
new file mode 100644
index 0000000..00dc07c
--- /dev/null
+++ b/board/davinci/common/psc.c
@@ -0,0 +1,117 @@
+/*
+ * Power and Sleep Controller (PSC) functions.
+ *
+ * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
+ * Copyright (C) 2008 Lyrtech <www.lyrtech.com>
+ * Copyright (C) 2004 Texas Instruments.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <common.h>
+#include <asm/arch/hardware.h>
+
+/*
+ * The DM6446 includes two separate power domains: "Always On" and "DSP". The
+ * "Always On" power domain is always on when the chip is on. The "Always On"
+ * domain is powered by the VDD pins of the DM6446. The majority of the
+ * DM6446's modules lie within the "Always On" power domain. A separate
+ * domain called the "DSP" domain houses the C64x+ and VICP. The "DSP" domain
+ * is not always on. The "DSP" power domain is powered by the CVDDDSP pins of
+ * the DM6446.
+ */
+
+/* Works on Always On power domain only (no PD argument) */
+void lpsc_on(unsigned int id)
+{
+ dv_reg_p mdstat, mdctl;
+
+ if (id >= DAVINCI_LPSC_GEM)
+ return; /* Don't work on DSP Power Domain */
+
+ mdstat = REG_P(PSC_MDSTAT_BASE + (id * 4));
+ mdctl = REG_P(PSC_MDCTL_BASE + (id * 4));
+
+ while (REG(PSC_PTSTAT) & 0x01);
+
+ if ((*mdstat & 0x1f) == 0x03)
+ return; /* Already on and enabled */
+
+ *mdctl |= 0x03;
+
+ /* Special treatment for some modules as for sprue14 p.7.4.2 */
+ switch (id) {
+ case DAVINCI_LPSC_VPSSSLV:
+ case DAVINCI_LPSC_EMAC:
+ case DAVINCI_LPSC_EMAC_WRAPPER:
+ case DAVINCI_LPSC_MDIO:
+ case DAVINCI_LPSC_USB:
+ case DAVINCI_LPSC_ATA:
+ case DAVINCI_LPSC_VLYNQ:
+ case DAVINCI_LPSC_UHPI:
+ case DAVINCI_LPSC_DDR_EMIF:
+ case DAVINCI_LPSC_AEMIF:
+ case DAVINCI_LPSC_MMC_SD:
+ case DAVINCI_LPSC_MEMSTICK:
+ case DAVINCI_LPSC_McBSP:
+ case DAVINCI_LPSC_GPIO:
+ *mdctl |= 0x200;
+ break;
+ }
+
+ REG(PSC_PTCMD) = 0x01;
+
+ while (REG(PSC_PTSTAT) & 0x03);
+ while ((*mdstat & 0x1f) != 0x03); /* Probably an overkill... */
+}
+
+/* If DSPLINK is used, we don't want U-Boot to power on the DSP. */
+#if !defined(CFG_USE_DSPLINK)
+void dsp_on(void)
+{
+ int i;
+
+ if (REG(PSC_PDSTAT1) & 0x1f)
+ return; /* Already on */
+
+ REG(PSC_GBLCTL) |= 0x01;
+ REG(PSC_PDCTL1) |= 0x01;
+ REG(PSC_PDCTL1) &= ~0x100;
+ REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_GEM * 4)) |= 0x03;
+ REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_GEM * 4)) &= 0xfffffeff;
+ REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_IMCOP * 4)) |= 0x03;
+ REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_IMCOP * 4)) &= 0xfffffeff;
+ REG(PSC_PTCMD) = 0x02;
+
+ for (i = 0; i < 100; i++) {
+ if (REG(PSC_EPCPR) & 0x02)
+ break;
+ }
+
+ REG(PSC_CHP_SHRTSW) = 0x01;
+ REG(PSC_PDCTL1) |= 0x100;
+ REG(PSC_EPCCR) = 0x02;
+
+ for (i = 0; i < 100; i++) {
+ if (!(REG(PSC_PTSTAT) & 0x02))
+ break;
+ }
+
+ REG(PSC_GBLCTL) &= ~0x1f;
+}
+#endif /* CFG_USE_DSPLINK */
diff --git a/board/integratorap/memsetup.S b/board/davinci/common/psc.h
index da43cb6..6ab2575 100644
--- a/board/integratorap/memsetup.S
+++ b/board/davinci/common/psc.h
@@ -1,13 +1,13 @@
/*
- * Memory setup for integratorAP
+ * Copyright (C) 2008 Lyrtech <www.lyrtech.com>
*
* See file CREDITS for list of people who contributed to this
* project.
*
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -16,14 +16,13 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-/*
- * Memory setup
- * - the reset defaults are assumed sufficient
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-.globl memsetup
-memsetup:
- mov pc,lr
+#ifndef __PSC_H
+#define __PSC_H
+
+void lpsc_on(unsigned int id);
+void dsp_on(void);
+
+#endif /* __PSC_H */
diff --git a/board/davinci/dv-evm/dv_board.c b/board/davinci/dv-evm/dv_board.c
deleted file mode 100644
index 834eb68..0000000
--- a/board/davinci/dv-evm/dv_board.c
+++ /dev/null
@@ -1,202 +0,0 @@
-/*
- * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
- *
- * Parts are shamelessly stolen from various TI sources, original copyright
- * follows:
- * -----------------------------------------------------------------
- *
- * Copyright (C) 2004 Texas Instruments.
- *
- * ----------------------------------------------------------------------------
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- * ----------------------------------------------------------------------------
- */
-
-#include <common.h>
-#include <i2c.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/emac_defs.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-extern void timer_init(void);
-extern int eth_hw_init(void);
-
-
-/* Works on Always On power domain only (no PD argument) */
-void lpsc_on(unsigned int id)
-{
- dv_reg_p mdstat, mdctl;
-
- if (id >= DAVINCI_LPSC_GEM)
- return; /* Don't work on DSP Power Domain */
-
- mdstat = REG_P(PSC_MDSTAT_BASE + (id * 4));
- mdctl = REG_P(PSC_MDCTL_BASE + (id * 4));
-
- while (REG(PSC_PTSTAT) & 0x01) {;}
-
- if ((*mdstat & 0x1f) == 0x03)
- return; /* Already on and enabled */
-
- *mdctl |= 0x03;
-
- /* Special treatment for some modules as for sprue14 p.7.4.2 */
- if ( (id == DAVINCI_LPSC_VPSSSLV) ||
- (id == DAVINCI_LPSC_EMAC) ||
- (id == DAVINCI_LPSC_EMAC_WRAPPER) ||
- (id == DAVINCI_LPSC_MDIO) ||
- (id == DAVINCI_LPSC_USB) ||
- (id == DAVINCI_LPSC_ATA) ||
- (id == DAVINCI_LPSC_VLYNQ) ||
- (id == DAVINCI_LPSC_UHPI) ||
- (id == DAVINCI_LPSC_DDR_EMIF) ||
- (id == DAVINCI_LPSC_AEMIF) ||
- (id == DAVINCI_LPSC_MMC_SD) ||
- (id == DAVINCI_LPSC_MEMSTICK) ||
- (id == DAVINCI_LPSC_McBSP) ||
- (id == DAVINCI_LPSC_GPIO)
- )
- *mdctl |= 0x200;
-
- REG(PSC_PTCMD) = 0x01;
-
- while (REG(PSC_PTSTAT) & 0x03) {;}
- while ((*mdstat & 0x1f) != 0x03) {;} /* Probably an overkill... */
-}
-
-void dsp_on(void)
-{
- int i;
-
- if (REG(PSC_PDSTAT1) & 0x1f)
- return; /* Already on */
-
- REG(PSC_GBLCTL) |= 0x01;
- REG(PSC_PDCTL1) |= 0x01;
- REG(PSC_PDCTL1) &= ~0x100;
- REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_GEM * 4)) |= 0x03;
- REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_GEM * 4)) &= 0xfffffeff;
- REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_IMCOP * 4)) |= 0x03;
- REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_IMCOP * 4)) &= 0xfffffeff;
- REG(PSC_PTCMD) = 0x02;
-
- for (i = 0; i < 100; i++) {
- if (REG(PSC_EPCPR) & 0x02)
- break;
- }
-
- REG(PSC_CHP_SHRTSW) = 0x01;
- REG(PSC_PDCTL1) |= 0x100;
- REG(PSC_EPCCR) = 0x02;
-
- for (i = 0; i < 100; i++) {
- if (!(REG(PSC_PTSTAT) & 0x02))
- break;
- }
-
- REG(PSC_GBLCTL) &= ~0x1f;
-}
-
-
-int board_init(void)
-{
- /* arch number of the board */
- gd->bd->bi_arch_number = MACH_TYPE_DAVINCI_EVM;
-
- /* address of boot parameters */
- gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR;
-
- /* Workaround for TMS320DM6446 errata 1.3.22 */
- REG(PSC_SILVER_BULLET) = 0;
-
- /* Power on required peripherals */
- lpsc_on(DAVINCI_LPSC_EMAC);
- lpsc_on(DAVINCI_LPSC_EMAC_WRAPPER);
- lpsc_on(DAVINCI_LPSC_MDIO);
- lpsc_on(DAVINCI_LPSC_I2C);
- lpsc_on(DAVINCI_LPSC_UART0);
- lpsc_on(DAVINCI_LPSC_TIMER1);
- lpsc_on(DAVINCI_LPSC_GPIO);
-
- /* Powerup the DSP */
- dsp_on();
-
- /* Bringup UART0 out of reset */
- REG(UART0_PWREMU_MGMT) = 0x0000e003;
-
- /* Enable GIO3.3V cells used for EMAC */
- REG(VDD3P3V_PWDN) = 0;
-
- /* Enable UART0 MUX lines */
- REG(PINMUX1) |= 1;
-
- /* Enable EMAC and AEMIF pins */
- REG(PINMUX0) = 0x80000c1f;
-
- /* Enable I2C pin Mux */
- REG(PINMUX1) |= (1 << 7);
-
- /* Set the Bus Priority Register to appropriate value */
- REG(VBPR) = 0x20;
-
- timer_init();
-
- return(0);
-}
-
-int misc_init_r (void)
-{
- u_int8_t tmp[20], buf[10];
- int i = 0;
- int clk = 0;
-
- clk = ((REG(PLL2_PLLM) + 1) * 27) / ((REG(PLL2_DIV2) & 0x1f) + 1);
-
- printf ("ARM Clock : %dMHz\n", ((REG(PLL1_PLLM) + 1) * 27 ) / 2);
- printf ("DDR Clock : %dMHz\n", (clk / 2));
-
- /* Set Ethernet MAC address from EEPROM */
- if (i2c_read(CFG_I2C_EEPROM_ADDR, 0x7f00, CFG_I2C_EEPROM_ADDR_LEN, buf, 6)) {
- printf("\nEEPROM @ 0x%02x read FAILED!!!\n", CFG_I2C_EEPROM_ADDR);
- } else {
- tmp[0] = 0xff;
- for (i = 0; i < 6; i++)
- tmp[0] &= buf[i];
-
- if ((tmp[0] != 0xff) && (getenv("ethaddr") == NULL)) {
- sprintf((char *)&tmp[0], "%02x:%02x:%02x:%02x:%02x:%02x",
- buf[0], buf[1], buf[2], buf[3], buf[4], buf[5]);
- setenv("ethaddr", (char *)&tmp[0]);
- }
- }
-
- if (!eth_hw_init())
- printf("ethernet init failed!\n");
-
- i2c_read (0x39, 0x00, 1, (u_int8_t *)&i, 1);
-
- setenv ("videostd", ((i & 0x80) ? "pal" : "ntsc"));
-
- return(0);
-}
-
-int dram_init(void)
-{
- gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-
- return(0);
-}
diff --git a/board/davinci/dv-evm/Makefile b/board/davinci/dvevm/Makefile
index 579efe2..fb31ee4 100644
--- a/board/davinci/dv-evm/Makefile
+++ b/board/davinci/dvevm/Makefile
@@ -27,7 +27,7 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(BOARD).a
-COBJS := dv_board.o
+COBJS := $(BOARD).o
SOBJS := board_init.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
diff --git a/board/davinci/dv-evm/board_init.S b/board/davinci/dvevm/board_init.S
index 22d8adc..22d8adc 100644
--- a/board/davinci/dv-evm/board_init.S
+++ b/board/davinci/dvevm/board_init.S
diff --git a/board/davinci/dv-evm/config.mk b/board/davinci/dvevm/config.mk
index aa89d0e..aa89d0e 100644
--- a/board/davinci/dv-evm/config.mk
+++ b/board/davinci/dvevm/config.mk
diff --git a/board/davinci/dvevm/dvevm.c b/board/davinci/dvevm/dvevm.c
new file mode 100644
index 0000000..151f8a9
--- /dev/null
+++ b/board/davinci/dvevm/dvevm.c
@@ -0,0 +1,103 @@
+/*
+ * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
+ *
+ * Parts are shamelessly stolen from various TI sources, original copyright
+ * follows:
+ * -----------------------------------------------------------------
+ *
+ * Copyright (C) 2004 Texas Instruments.
+ *
+ * ----------------------------------------------------------------------------
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ * ----------------------------------------------------------------------------
+ */
+
+#include <common.h>
+#include <i2c.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/emac_defs.h>
+#include "../common/psc.h"
+#include "../common/misc.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int board_init(void)
+{
+ /* arch number of the board */
+ gd->bd->bi_arch_number = MACH_TYPE_DAVINCI_EVM;
+
+ /* address of boot parameters */
+ gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR;
+
+ /* Workaround for TMS320DM6446 errata 1.3.22 */
+ REG(PSC_SILVER_BULLET) = 0;
+
+ /* Power on required peripherals */
+ lpsc_on(DAVINCI_LPSC_EMAC);
+ lpsc_on(DAVINCI_LPSC_EMAC_WRAPPER);
+ lpsc_on(DAVINCI_LPSC_MDIO);
+ lpsc_on(DAVINCI_LPSC_I2C);
+ lpsc_on(DAVINCI_LPSC_UART0);
+ lpsc_on(DAVINCI_LPSC_TIMER1);
+ lpsc_on(DAVINCI_LPSC_GPIO);
+
+#if !defined(CFG_USE_DSPLINK)
+ /* Powerup the DSP */
+ dsp_on();
+#endif /* CFG_USE_DSPLINK */
+
+ /* Bringup UART0 out of reset */
+ REG(UART0_PWREMU_MGMT) = 0x0000e003;
+
+ /* Enable GIO3.3V cells used for EMAC */
+ REG(VDD3P3V_PWDN) = 0;
+
+ /* Enable UART0 MUX lines */
+ REG(PINMUX1) |= 1;
+
+ /* Enable EMAC and AEMIF pins */
+ REG(PINMUX0) = 0x80000c1f;
+
+ /* Enable I2C pin Mux */
+ REG(PINMUX1) |= (1 << 7);
+
+ /* Set the Bus Priority Register to appropriate value */
+ REG(VBPR) = 0x20;
+
+ timer_init();
+
+ return(0);
+}
+
+int misc_init_r(void)
+{
+ uint8_t video_mode;
+ uint8_t eeprom_enetaddr[6];
+
+ dv_display_clk_infos();
+
+ /* Read Ethernet MAC address from EEPROM if available. */
+ if (dvevm_read_mac_address(eeprom_enetaddr))
+ dv_configure_mac_address(eeprom_enetaddr);
+
+ if (!eth_hw_init())
+ printf("ethernet init failed!\n");
+
+ i2c_read(0x39, 0x00, 1, &video_mode, 1);
+
+ setenv("videostd", ((video_mode & 0x80) ? "pal" : "ntsc"));
+
+ return(0);
+}
diff --git a/board/davinci/dv-evm/u-boot.lds b/board/davinci/dvevm/u-boot.lds
index a4fcd1a..a4fcd1a 100644
--- a/board/davinci/dv-evm/u-boot.lds
+++ b/board/davinci/dvevm/u-boot.lds
diff --git a/board/davinci/schmoogie/Makefile b/board/davinci/schmoogie/Makefile
index 579efe2..fb31ee4 100644
--- a/board/davinci/schmoogie/Makefile
+++ b/board/davinci/schmoogie/Makefile
@@ -27,7 +27,7 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(BOARD).a
-COBJS := dv_board.o
+COBJS := $(BOARD).o
SOBJS := board_init.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
diff --git a/board/davinci/schmoogie/dv_board.c b/board/davinci/schmoogie/schmoogie.c
index 3017546..99fd326 100644
--- a/board/davinci/schmoogie/dv_board.c
+++ b/board/davinci/schmoogie/schmoogie.c
@@ -28,89 +28,11 @@
#include <i2c.h>
#include <asm/arch/hardware.h>
#include <asm/arch/emac_defs.h>
+#include "../common/psc.h"
+#include "../common/misc.h"
DECLARE_GLOBAL_DATA_PTR;
-extern void timer_init(void);
-extern int eth_hw_init(void);
-
-
-/* Works on Always On power domain only (no PD argument) */
-void lpsc_on(unsigned int id)
-{
- dv_reg_p mdstat, mdctl;
-
- if (id >= DAVINCI_LPSC_GEM)
- return; /* Don't work on DSP Power Domain */
-
- mdstat = REG_P(PSC_MDSTAT_BASE + (id * 4));
- mdctl = REG_P(PSC_MDCTL_BASE + (id * 4));
-
- while (REG(PSC_PTSTAT) & 0x01) {;}
-
- if ((*mdstat & 0x1f) == 0x03)
- return; /* Already on and enabled */
-
- *mdctl |= 0x03;
-
- /* Special treatment for some modules as for sprue14 p.7.4.2 */
- if ( (id == DAVINCI_LPSC_VPSSSLV) ||
- (id == DAVINCI_LPSC_EMAC) ||
- (id == DAVINCI_LPSC_EMAC_WRAPPER) ||
- (id == DAVINCI_LPSC_MDIO) ||
- (id == DAVINCI_LPSC_USB) ||
- (id == DAVINCI_LPSC_ATA) ||
- (id == DAVINCI_LPSC_VLYNQ) ||
- (id == DAVINCI_LPSC_UHPI) ||
- (id == DAVINCI_LPSC_DDR_EMIF) ||
- (id == DAVINCI_LPSC_AEMIF) ||
- (id == DAVINCI_LPSC_MMC_SD) ||
- (id == DAVINCI_LPSC_MEMSTICK) ||
- (id == DAVINCI_LPSC_McBSP) ||
- (id == DAVINCI_LPSC_GPIO)
- )
- *mdctl |= 0x200;
-
- REG(PSC_PTCMD) = 0x01;
-
- while (REG(PSC_PTSTAT) & 0x03) {;}
- while ((*mdstat & 0x1f) != 0x03) {;} /* Probably an overkill... */
-}
-
-void dsp_on(void)
-{
- int i;
-
- if (REG(PSC_PDSTAT1) & 0x1f)
- return; /* Already on */
-
- REG(PSC_GBLCTL) |= 0x01;
- REG(PSC_PDCTL1) |= 0x01;
- REG(PSC_PDCTL1) &= ~0x100;
- REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_GEM * 4)) |= 0x03;
- REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_GEM * 4)) &= 0xfffffeff;
- REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_IMCOP * 4)) |= 0x03;
- REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_IMCOP * 4)) &= 0xfffffeff;
- REG(PSC_PTCMD) = 0x02;
-
- for (i = 0; i < 100; i++) {
- if (REG(PSC_EPCPR) & 0x02)
- break;
- }
-
- REG(PSC_CHP_SHRTSW) = 0x01;
- REG(PSC_PDCTL1) |= 0x100;
- REG(PSC_EPCCR) = 0x02;
-
- for (i = 0; i < 100; i++) {
- if (!(REG(PSC_PTSTAT) & 0x02))
- break;
- }
-
- REG(PSC_GBLCTL) &= ~0x1f;
-}
-
-
int board_init(void)
{
/* arch number of the board */
@@ -131,8 +53,10 @@ int board_init(void)
lpsc_on(DAVINCI_LPSC_TIMER1);
lpsc_on(DAVINCI_LPSC_GPIO);
+#if !defined(CFG_USE_DSPLINK)
/* Powerup the DSP */
dsp_on();
+#endif /* CFG_USE_DSPLINK */
/* Bringup UART0 out of reset */
REG(UART0_PWREMU_MGMT) = 0x0000e003;
@@ -157,11 +81,10 @@ int board_init(void)
return(0);
}
-int misc_init_r (void)
+int misc_init_r(void)
{
u_int8_t tmp[20], buf[10];
int i = 0;
- int clk = 0;
/* Set serial number from UID chip */
u_int8_t crc_tbl[256] = {
@@ -199,17 +122,15 @@ int misc_init_r (void)
0xb6, 0xe8, 0x0a, 0x54, 0xd7, 0x89, 0x6b, 0x35
};
- clk = ((REG(PLL2_PLLM) + 1) * 27) / ((REG(PLL2_DIV2) & 0x1f) + 1);
-
- printf ("ARM Clock : %dMHz\n", ((REG(PLL1_PLLM) + 1) * 27 ) / 2);
- printf ("DDR Clock : %dMHz\n", (clk / 2));
+ dv_display_clk_infos();
/* Set serial number from UID chip */
if (i2c_read(CFG_UID_ADDR, 0, 1, buf, 8)) {
printf("\nUID @ 0x%02x read FAILED!!!\n", CFG_UID_ADDR);
forceenv("serial#", "FAILED");
} else {
- if (buf[0] != 0x70) { /* Device Family Code */
+ if (buf[0] != 0x70) {
+ /* Device Family Code */
printf("\nUID @ 0x%02x read FAILED!!!\n", CFG_UID_ADDR);
forceenv("serial#", "FAILED");
}
@@ -234,11 +155,3 @@ int misc_init_r (void)
return(0);
}
-
-int dram_init(void)
-{
- gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-
- return(0);
-}
diff --git a/board/davinci/sffsdr/sffsdr.c b/board/davinci/sffsdr/sffsdr.c
index f41081f..f47ba0f 100644
--- a/board/davinci/sffsdr/sffsdr.c
+++ b/board/davinci/sffsdr/sffsdr.c
@@ -31,6 +31,8 @@
#include <i2c.h>
#include <asm/arch/hardware.h>
#include <asm/arch/emac_defs.h>
+#include "../common/psc.h"
+#include "../common/misc.h"
#define DAVINCI_A3CR (0x01E00014) /* EMIF-A CS3 config register. */
#define DAVINCI_A3CR_VAL (0x3FFFFFFD) /* EMIF-A CS3 value for FPGA. */
@@ -41,89 +43,6 @@
DECLARE_GLOBAL_DATA_PTR;
-extern void timer_init(void);
-extern int eth_hw_init(void);
-
-
-/* Works on Always On power domain only (no PD argument) */
-void lpsc_on(unsigned int id)
-{
- dv_reg_p mdstat, mdctl;
-
- if (id >= DAVINCI_LPSC_GEM)
- return; /* Don't work on DSP Power Domain */
-
- mdstat = REG_P(PSC_MDSTAT_BASE + (id * 4));
- mdctl = REG_P(PSC_MDCTL_BASE + (id * 4));
-
- while (REG(PSC_PTSTAT) & 0x01);
-
- if ((*mdstat & 0x1f) == 0x03)
- return; /* Already on and enabled */
-
- *mdctl |= 0x03;
-
- /* Special treatment for some modules as for sprue14 p.7.4.2 */
- switch (id) {
- case DAVINCI_LPSC_VPSSSLV:
- case DAVINCI_LPSC_EMAC:
- case DAVINCI_LPSC_EMAC_WRAPPER:
- case DAVINCI_LPSC_MDIO:
- case DAVINCI_LPSC_USB:
- case DAVINCI_LPSC_ATA:
- case DAVINCI_LPSC_VLYNQ:
- case DAVINCI_LPSC_UHPI:
- case DAVINCI_LPSC_DDR_EMIF:
- case DAVINCI_LPSC_AEMIF:
- case DAVINCI_LPSC_MMC_SD:
- case DAVINCI_LPSC_MEMSTICK:
- case DAVINCI_LPSC_McBSP:
- case DAVINCI_LPSC_GPIO:
- *mdctl |= 0x200;
- break;
- }
-
- REG(PSC_PTCMD) = 0x01;
-
- while (REG(PSC_PTSTAT) & 0x03);
- while ((*mdstat & 0x1f) != 0x03); /* Probably an overkill... */
-}
-
-#if !defined(CFG_USE_DSPLINK)
-void dsp_on(void)
-{
- int i;
-
- if (REG(PSC_PDSTAT1) & 0x1f)
- return; /* Already on */
-
- REG(PSC_GBLCTL) |= 0x01;
- REG(PSC_PDCTL1) |= 0x01;
- REG(PSC_PDCTL1) &= ~0x100;
- REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_GEM * 4)) |= 0x03;
- REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_GEM * 4)) &= 0xfffffeff;
- REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_IMCOP * 4)) |= 0x03;
- REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_IMCOP * 4)) &= 0xfffffeff;
- REG(PSC_PTCMD) = 0x02;
-
- for (i = 0; i < 100; i++) {
- if (REG(PSC_EPCPR) & 0x02)
- break;
- }
-
- REG(PSC_CHP_SHRTSW) = 0x01;
- REG(PSC_PDCTL1) |= 0x100;
- REG(PSC_EPCCR) = 0x02;
-
- for (i = 0; i < 100; i++) {
- if (!(REG(PSC_PTSTAT) & 0x02))
- break;
- }
-
- REG(PSC_GBLCTL) &= ~0x1f;
-}
-#endif /* CFG_USE_DSPLINK */
-
int board_init(void)
{
/* arch number of the board */
@@ -172,8 +91,10 @@ int board_init(void)
return(0);
}
-/* Read ethernet MAC address from Integrity data structure inside EEPROM. */
-int read_mac_address(uint8_t *buf)
+/* Read ethernet MAC address from Integrity data structure inside EEPROM.
+ * Returns 1 if found, 0 otherwise.
+ */
+static int sffsdr_read_mac_address(uint8_t *buf)
{
u_int32_t value, mac[2], address;
@@ -182,7 +103,7 @@ int read_mac_address(uint8_t *buf)
CFG_I2C_EEPROM_ADDR_LEN, (uint8_t *) &value, 4))
goto err;
if (value != INTEGRITY_CHECKWORD_VALUE)
- return 1;
+ return 0;
/* Read SYSCFG structure offset. */
if (i2c_read(CFG_I2C_EEPROM_ADDR, INTEGRITY_SYSCFG_OFFSET,
@@ -216,30 +137,23 @@ int read_mac_address(uint8_t *buf)
buf[4] = mac[1] >> 24;
buf[5] = mac[1] >> 16;
- return 0;
+ return 1; /* Found */
err:
printf("Read from EEPROM @ 0x%02x failed\n", CFG_I2C_EEPROM_ADDR);
- return 1;
+ return 0;
}
/* Platform dependent initialisation. */
int misc_init_r(void)
{
- int i;
- u_int8_t i2cbuf;
- u_int8_t env_enetaddr[6], eeprom_enetaddr[6];
- char *tmp = getenv("ethaddr");
- char *end;
- int clk;
+ uint8_t i2cbuf;
+ uint8_t eeprom_enetaddr[6];
/* EMIF-A CS3 configuration for FPGA. */
REG(DAVINCI_A3CR) = DAVINCI_A3CR_VAL;
- clk = ((REG(PLL2_PLLM) + 1) * 27) / ((REG(PLL2_DIV2) & 0x1f) + 1);
-
- printf("ARM Clock: %dMHz\n", ((REG(PLL1_PLLM) + 1) * 27) / 2);
- printf("DDR Clock: %dMHz\n", (clk / 2));
+ dv_display_clk_infos();
/* Configure I2C switch (PCA9543) to enable channel 0. */
i2cbuf = CFG_I2C_PCA9543_ENABLE_CH0;
@@ -249,43 +163,9 @@ int misc_init_r(void)
return 1;
}
- /* Read Ethernet MAC address from the U-Boot environment. */
- for (i = 0; i < 6; i++) {
- env_enetaddr[i] = tmp ? simple_strtoul(tmp, &end, 16) : 0;
- if (tmp)
- tmp = (*end) ? end+1 : end;
- }
-
- /* Read Ethernet MAC address from EEPROM. */
- if (read_mac_address(eeprom_enetaddr) == 0) {
- if (memcmp(env_enetaddr, "\0\0\0\0\0\0", 6) != 0 &&
- memcmp(env_enetaddr, eeprom_enetaddr, 6) != 0) {
- printf("\nWarning: MAC addresses don't match:\n");
- printf("\tHW MAC address: "
- "%02X:%02X:%02X:%02X:%02X:%02X\n",
- eeprom_enetaddr[0], eeprom_enetaddr[1],
- eeprom_enetaddr[2], eeprom_enetaddr[3],
- eeprom_enetaddr[4], eeprom_enetaddr[5]);
- printf("\t\"ethaddr\" value: "
- "%02X:%02X:%02X:%02X:%02X:%02X\n",
- env_enetaddr[0], env_enetaddr[1],
- env_enetaddr[2], env_enetaddr[3],
- env_enetaddr[4], env_enetaddr[5]) ;
- debug("### Set MAC addr from environment\n");
- memcpy(eeprom_enetaddr, env_enetaddr, 6);
- }
- if (!tmp) {
- char ethaddr[20];
-
- sprintf(ethaddr, "%02X:%02X:%02X:%02X:%02X:%02X",
- eeprom_enetaddr[0], eeprom_enetaddr[1],
- eeprom_enetaddr[2], eeprom_enetaddr[3],
- eeprom_enetaddr[4], eeprom_enetaddr[5]) ;
- debug("### Set environment from HW MAC addr = \"%s\"\n",
- ethaddr);
- setenv("ethaddr", ethaddr);
- }
- }
+ /* Read Ethernet MAC address from EEPROM if available. */
+ if (sffsdr_read_mac_address(eeprom_enetaddr))
+ dv_configure_mac_address(eeprom_enetaddr);
if (!eth_hw_init())
printf("Ethernet init failed\n");
@@ -296,11 +176,3 @@ int misc_init_r(void)
return(0);
}
-
-int dram_init(void)
-{
- gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-
- return(0);
-}
diff --git a/board/davinci/sonata/Makefile b/board/davinci/sonata/Makefile
index 579efe2..fb31ee4 100644
--- a/board/davinci/sonata/Makefile
+++ b/board/davinci/sonata/Makefile
@@ -27,7 +27,7 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(BOARD).a
-COBJS := dv_board.o
+COBJS := $(BOARD).o
SOBJS := board_init.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
diff --git a/board/davinci/sonata/dv_board.c b/board/davinci/sonata/dv_board.c
deleted file mode 100644
index a6f9bc7..0000000
--- a/board/davinci/sonata/dv_board.c
+++ /dev/null
@@ -1,199 +0,0 @@
-/*
- * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
- *
- * Parts are shamelessly stolen from various TI sources, original copyright
- * follows:
- * -----------------------------------------------------------------
- *
- * Copyright (C) 2004 Texas Instruments.
- *
- * ----------------------------------------------------------------------------
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- * ----------------------------------------------------------------------------
- */
-
-#include <common.h>
-#include <i2c.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/emac_defs.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-extern void timer_init(void);
-extern int eth_hw_init(void);
-
-
-/* Works on Always On power domain only (no PD argument) */
-void lpsc_on(unsigned int id)
-{
- dv_reg_p mdstat, mdctl;
-
- if (id >= DAVINCI_LPSC_GEM)
- return; /* Don't work on DSP Power Domain */
-
- mdstat = REG_P(PSC_MDSTAT_BASE + (id * 4));
- mdctl = REG_P(PSC_MDCTL_BASE + (id * 4));
-
- while (REG(PSC_PTSTAT) & 0x01) {;}
-
- if ((*mdstat & 0x1f) == 0x03)
- return; /* Already on and enabled */
-
- *mdctl |= 0x03;
-
- /* Special treatment for some modules as for sprue14 p.7.4.2 */
- if ( (id == DAVINCI_LPSC_VPSSSLV) ||
- (id == DAVINCI_LPSC_EMAC) ||
- (id == DAVINCI_LPSC_EMAC_WRAPPER) ||
- (id == DAVINCI_LPSC_MDIO) ||
- (id == DAVINCI_LPSC_USB) ||
- (id == DAVINCI_LPSC_ATA) ||
- (id == DAVINCI_LPSC_VLYNQ) ||
- (id == DAVINCI_LPSC_UHPI) ||
- (id == DAVINCI_LPSC_DDR_EMIF) ||
- (id == DAVINCI_LPSC_AEMIF) ||
- (id == DAVINCI_LPSC_MMC_SD) ||
- (id == DAVINCI_LPSC_MEMSTICK) ||
- (id == DAVINCI_LPSC_McBSP) ||
- (id == DAVINCI_LPSC_GPIO)
- )
- *mdctl |= 0x200;
-
- REG(PSC_PTCMD) = 0x01;
-
- while (REG(PSC_PTSTAT) & 0x03) {;}
- while ((*mdstat & 0x1f) != 0x03) {;} /* Probably an overkill... */
-}
-
-void dsp_on(void)
-{
- int i;
-
- if (REG(PSC_PDSTAT1) & 0x1f)
- return; /* Already on */
-
- REG(PSC_GBLCTL) |= 0x01;
- REG(PSC_PDCTL1) |= 0x01;
- REG(PSC_PDCTL1) &= ~0x100;
- REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_GEM * 4)) |= 0x03;
- REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_GEM * 4)) &= 0xfffffeff;
- REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_IMCOP * 4)) |= 0x03;
- REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_IMCOP * 4)) &= 0xfffffeff;
- REG(PSC_PTCMD) = 0x02;
-
- for (i = 0; i < 100; i++) {
- if (REG(PSC_EPCPR) & 0x02)
- break;
- }
-
- REG(PSC_CHP_SHRTSW) = 0x01;
- REG(PSC_PDCTL1) |= 0x100;
- REG(PSC_EPCCR) = 0x02;
-
- for (i = 0; i < 100; i++) {
- if (!(REG(PSC_PTSTAT) & 0x02))
- break;
- }
-
- REG(PSC_GBLCTL) &= ~0x1f;
-}
-
-
-int board_init(void)
-{
- /* arch number of the board */
- gd->bd->bi_arch_number = MACH_TYPE_SONATA;
-
- /* address of boot parameters */
- gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR;
-
- /* Workaround for TMS320DM6446 errata 1.3.22 */
- REG(PSC_SILVER_BULLET) = 0;
-
- /* Power on required peripherals */
- lpsc_on(DAVINCI_LPSC_EMAC);
- lpsc_on(DAVINCI_LPSC_EMAC_WRAPPER);
- lpsc_on(DAVINCI_LPSC_MDIO);
- lpsc_on(DAVINCI_LPSC_I2C);
- lpsc_on(DAVINCI_LPSC_UART0);
- lpsc_on(DAVINCI_LPSC_TIMER1);
- lpsc_on(DAVINCI_LPSC_GPIO);
-
- /* Powerup the DSP */
- dsp_on();
-
- /* Bringup UART0 out of reset */
- REG(UART0_PWREMU_MGMT) = 0x0000e003;
-
- /* Enable GIO3.3V cells used for EMAC */
- REG(VDD3P3V_PWDN) = 0;
-
- /* Enable UART0 MUX lines */
- REG(PINMUX1) |= 1;
-
- /* Enable EMAC and AEMIF pins */
- REG(PINMUX0) = 0x80000c1f;
-
- /* Enable I2C pin Mux */
- REG(PINMUX1) |= (1 << 7);
-
- /* Set the Bus Priority Register to appropriate value */
- REG(VBPR) = 0x20;
-
- timer_init();
-
- return(0);
-}
-
-int misc_init_r (void)
-{
- u_int8_t tmp[20], buf[10];
- int i = 0;
- int clk = 0;
-
-
- clk = ((REG(PLL2_PLLM) + 1) * 27) / ((REG(PLL2_DIV2) & 0x1f) + 1);
-
- printf ("ARM Clock : %dMHz\n", ((REG(PLL1_PLLM) + 1) * 27 ) / 2);
- printf ("DDR Clock : %dMHz\n", (clk / 2));
-
- /* Set Ethernet MAC address from EEPROM */
- if (i2c_read(CFG_I2C_EEPROM_ADDR, 0x7f00, CFG_I2C_EEPROM_ADDR_LEN, buf, 6)) {
- printf("\nEEPROM @ 0x%02x read FAILED!!!\n", CFG_I2C_EEPROM_ADDR);
- } else {
- tmp[0] = 0xff;
- for (i = 0; i < 6; i++)
- tmp[0] &= buf[i];
-
- if ((tmp[0] != 0xff) && (getenv("ethaddr") == NULL)) {
- sprintf((char *)&tmp[0], "%02x:%02x:%02x:%02x:%02x:%02x",
- buf[0], buf[1], buf[2], buf[3], buf[4], buf[5]);
- setenv("ethaddr", (char *)&tmp[0]);
- }
- }
-
- if (!eth_hw_init())
- printf("ethernet init failed!\n");
-
- return(0);
-}
-
-int dram_init(void)
-{
- gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-
- return(0);
-}
diff --git a/board/davinci/sonata/sonata.c b/board/davinci/sonata/sonata.c
new file mode 100644
index 0000000..a6fe825
--- /dev/null
+++ b/board/davinci/sonata/sonata.c
@@ -0,0 +1,97 @@
+/*
+ * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
+ *
+ * Parts are shamelessly stolen from various TI sources, original copyright
+ * follows:
+ * -----------------------------------------------------------------
+ *
+ * Copyright (C) 2004 Texas Instruments.
+ *
+ * ----------------------------------------------------------------------------
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ * ----------------------------------------------------------------------------
+ */
+
+#include <common.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/emac_defs.h>
+#include "../common/psc.h"
+#include "../common/misc.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int board_init(void)
+{
+ /* arch number of the board */
+ gd->bd->bi_arch_number = MACH_TYPE_SONATA;
+
+ /* address of boot parameters */
+ gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR;
+
+ /* Workaround for TMS320DM6446 errata 1.3.22 */
+ REG(PSC_SILVER_BULLET) = 0;
+
+ /* Power on required peripherals */
+ lpsc_on(DAVINCI_LPSC_EMAC);
+ lpsc_on(DAVINCI_LPSC_EMAC_WRAPPER);
+ lpsc_on(DAVINCI_LPSC_MDIO);
+ lpsc_on(DAVINCI_LPSC_I2C);
+ lpsc_on(DAVINCI_LPSC_UART0);
+ lpsc_on(DAVINCI_LPSC_TIMER1);
+ lpsc_on(DAVINCI_LPSC_GPIO);
+
+#if !defined(CFG_USE_DSPLINK)
+ /* Powerup the DSP */
+ dsp_on();
+#endif /* CFG_USE_DSPLINK */
+
+ /* Bringup UART0 out of reset */
+ REG(UART0_PWREMU_MGMT) = 0x0000e003;
+
+ /* Enable GIO3.3V cells used for EMAC */
+ REG(VDD3P3V_PWDN) = 0;
+
+ /* Enable UART0 MUX lines */
+ REG(PINMUX1) |= 1;
+
+ /* Enable EMAC and AEMIF pins */
+ REG(PINMUX0) = 0x80000c1f;
+
+ /* Enable I2C pin Mux */
+ REG(PINMUX1) |= (1 << 7);
+
+ /* Set the Bus Priority Register to appropriate value */
+ REG(VBPR) = 0x20;
+
+ timer_init();
+
+ return(0);
+}
+
+int misc_init_r(void)
+{
+ uint8_t eeprom_enetaddr[6];
+
+ dv_display_clk_infos();
+
+ /* Read Ethernet MAC address from EEPROM if available. */
+ if (dvevm_read_mac_address(eeprom_enetaddr))
+ dv_configure_mac_address(eeprom_enetaddr);
+
+ if (!eth_hw_init())
+ printf("ethernet init failed!\n");
+
+ return(0);
+}
diff --git a/board/integratorap/Makefile b/board/integratorap/Makefile
index f78de3a..79f501a 100644
--- a/board/integratorap/Makefile
+++ b/board/integratorap/Makefile
@@ -30,7 +30,7 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(BOARD).a
COBJS := integratorap.o flash.o
-SOBJS := lowlevel_init.o memsetup.o
+SOBJS := lowlevel_init.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
diff --git a/board/integratorcp/Makefile b/board/integratorcp/Makefile
index 9201acc..92a1a07 100644
--- a/board/integratorcp/Makefile
+++ b/board/integratorcp/Makefile
@@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(BOARD).a
COBJS := integratorcp.o flash.o
-SOBJS := lowlevel_init.o memsetup.o
+SOBJS := lowlevel_init.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
diff --git a/board/samsung/smdk6400/.gitignore b/board/samsung/smdk6400/.gitignore
new file mode 100644
index 0000000..25ab492
--- /dev/null
+++ b/board/samsung/smdk6400/.gitignore
@@ -0,0 +1,5 @@
+#
+# Generated files
+#
+
+/config.tmp
diff --git a/board/samsung/smdk6400/Makefile b/board/samsung/smdk6400/Makefile
new file mode 100644
index 0000000..7130220
--- /dev/null
+++ b/board/samsung/smdk6400/Makefile
@@ -0,0 +1,54 @@
+#
+# (C) Copyright 2000, 2001, 2002
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# (C) Copyright 2008
+# Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS-y := smdk6400.o
+SOBJS := lowlevel_init.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS-y))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(SOBJS) $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(SOBJS) $(OBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/samsung/smdk6400/config.mk b/board/samsung/smdk6400/config.mk
new file mode 100644
index 0000000..298d387
--- /dev/null
+++ b/board/samsung/smdk6400/config.mk
@@ -0,0 +1,30 @@
+#
+# (C) Copyright 2002
+# Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+# David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
+#
+# (C) Copyright 2008
+# Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de>
+#
+# SAMSUNG SMDK6400 board with mDirac3 (ARM1176) cpu
+#
+# see http://www.samsung.com/ for more information on SAMSUNG
+
+# On SMDK6400 we use the 64 MB SDRAM bank at
+#
+# 0x50000000 to 0x58000000
+#
+# Linux-Kernel is expected to be at 0x50008000, entry 0x50008000
+#
+# we load ourselves to 0x57e00000 without MMU
+# with MMU, load address is changed to 0xc7e00000
+#
+# download area is 0x5000c000
+
+sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
+
+ifndef CONFIG_NAND_SPL
+TEXT_BASE = $(RAM_TEXT)
+else
+TEXT_BASE = 0
+endif
diff --git a/board/samsung/smdk6400/lowlevel_init.S b/board/samsung/smdk6400/lowlevel_init.S
new file mode 100644
index 0000000..034c810
--- /dev/null
+++ b/board/samsung/smdk6400/lowlevel_init.S
@@ -0,0 +1,316 @@
+/*
+ * Memory Setup stuff - taken from blob memsetup.S
+ *
+ * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and
+ * Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl)
+ *
+ * Modified for the Samsung SMDK2410 by
+ * (C) Copyright 2002
+ * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
+ *
+ * (C) Copyright 2008
+ * Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+#include <config.h>
+#include <version.h>
+
+#include <s3c6400.h>
+
+#ifdef CONFIG_SERIAL1
+#define ELFIN_UART_CONSOLE_BASE (ELFIN_UART_BASE + ELFIN_UART0_OFFSET)
+#elif defined(CONFIG_SERIAL2)
+#define ELFIN_UART_CONSOLE_BASE (ELFIN_UART_BASE + ELFIN_UART1_OFFSET)
+#else
+#define ELFIN_UART_CONSOLE_BASE (ELFIN_UART_BASE + ELFIN_UART2_OFFSET)
+#endif
+
+_TEXT_BASE:
+ .word TEXT_BASE
+
+ .globl lowlevel_init
+lowlevel_init:
+ mov r12, lr
+
+ /* LED on only #8 */
+ ldr r0, =ELFIN_GPIO_BASE
+ ldr r1, =0x55540000
+ str r1, [r0, #GPNCON_OFFSET]
+
+ ldr r1, =0x55555555
+ str r1, [r0, #GPNPUD_OFFSET]
+
+ ldr r1, =0xf000
+ str r1, [r0, #GPNDAT_OFFSET]
+
+ /* Disable Watchdog */
+ ldr r0, =0x7e000000 @0x7e004000
+ orr r0, r0, #0x4000
+ mov r1, #0
+ str r1, [r0]
+
+ /* External interrupt pending clear */
+ ldr r0, =(ELFIN_GPIO_BASE+EINTPEND_OFFSET) /*EINTPEND*/
+ ldr r1, [r0]
+ str r1, [r0]
+
+ ldr r0, =ELFIN_VIC0_BASE_ADDR @0x71200000
+ ldr r1, =ELFIN_VIC1_BASE_ADDR @0x71300000
+
+ /* Disable all interrupts (VIC0 and VIC1) */
+ mvn r3, #0x0
+ str r3, [r0, #oINTMSK]
+ str r3, [r1, #oINTMSK]
+
+ /* Set all interrupts as IRQ */
+ mov r3, #0x0
+ str r3, [r0, #oINTMOD]
+ str r3, [r1, #oINTMOD]
+
+ /* Pending Interrupt Clear */
+ mov r3, #0x0
+ str r3, [r0, #oVECTADDR]
+ str r3, [r1, #oVECTADDR]
+
+ /* init system clock */
+ bl system_clock_init
+
+#ifndef CONFIG_NAND_SPL
+ /* for UART */
+ bl uart_asm_init
+#endif
+
+#ifdef CONFIG_BOOT_NAND
+ /* simple init for NAND */
+ bl nand_asm_init
+#endif
+
+ bl mem_ctrl_asm_init
+
+/* Wakeup support. Don't know if it's going to be used, untested. */
+ ldr r0, =(ELFIN_CLOCK_POWER_BASE + RST_STAT_OFFSET)
+ ldr r1, [r0]
+ bic r1, r1, #0xfffffff7
+ cmp r1, #0x8
+ beq wakeup_reset
+
+1:
+ mov lr, r12
+ mov pc, lr
+
+wakeup_reset:
+
+ /* Clear wakeup status register */
+ ldr r0, =(ELFIN_CLOCK_POWER_BASE + WAKEUP_STAT_OFFSET)
+ ldr r1, [r0]
+ str r1, [r0]
+
+ /* LED test */
+ ldr r0, =ELFIN_GPIO_BASE
+ ldr r1, =0x3000
+ str r1, [r0, #GPNDAT_OFFSET]
+
+ /* Load return address and jump to kernel */
+ ldr r0, =(ELFIN_CLOCK_POWER_BASE + INF_REG0_OFFSET)
+ /* r1 = physical address of s3c6400_cpu_resume function */
+ ldr r1, [r0]
+ /* Jump to kernel (sleep-s3c6400.S) */
+ mov pc, r1
+ nop
+ nop
+/*
+ * system_clock_init: Initialize core clock and bus clock.
+ * void system_clock_init(void)
+ */
+system_clock_init:
+ ldr r0, =ELFIN_CLOCK_POWER_BASE /* 0x7e00f000 */
+
+#ifdef CONFIG_SYNC_MODE
+ ldr r1, [r0, #OTHERS_OFFSET]
+ mov r2, #0x40
+ orr r1, r1, r2
+ str r1, [r0, #OTHERS_OFFSET]
+
+ nop
+ nop
+ nop
+ nop
+ nop
+
+ ldr r2, =0x80
+ orr r1, r1, r2
+ str r1, [r0, #OTHERS_OFFSET]
+
+check_syncack:
+ ldr r1, [r0, #OTHERS_OFFSET]
+ ldr r2, =0xf00
+ and r1, r1, r2
+ cmp r1, #0xf00
+ bne check_syncack
+#else /* ASYNC Mode */
+ nop
+ nop
+ nop
+ nop
+ nop
+
+ /*
+ * This was unconditional in original Samsung sources, but it doesn't
+ * seem to make much sense on S3C6400.
+ */
+#ifndef CONFIG_S3C6400
+ ldr r1, [r0, #OTHERS_OFFSET]
+ bic r1, r1, #0xC0
+ orr r1, r1, #0x40
+ str r1, [r0, #OTHERS_OFFSET]
+
+wait_for_async:
+ ldr r1, [r0, #OTHERS_OFFSET]
+ and r1, r1, #0xf00
+ cmp r1, #0x0
+ bne wait_for_async
+#endif
+
+ ldr r1, [r0, #OTHERS_OFFSET]
+ bic r1, r1, #0x40
+ str r1, [r0, #OTHERS_OFFSET]
+#endif
+
+ mov r1, #0xff00
+ orr r1, r1, #0xff
+ str r1, [r0, #APLL_LOCK_OFFSET]
+ str r1, [r0, #MPLL_LOCK_OFFSET]
+
+ /* Set Clock Divider */
+ ldr r1, [r0, #CLK_DIV0_OFFSET]
+ bic r1, r1, #0x30000
+ bic r1, r1, #0xff00
+ bic r1, r1, #0xff
+ ldr r2, =CLK_DIV_VAL
+ orr r1, r1, r2
+ str r1, [r0, #CLK_DIV0_OFFSET]
+
+ ldr r1, =APLL_VAL
+ str r1, [r0, #APLL_CON_OFFSET]
+ ldr r1, =MPLL_VAL
+ str r1, [r0, #MPLL_CON_OFFSET]
+
+ /* FOUT of EPLL is 96MHz */
+ ldr r1, =0x200203
+ str r1, [r0, #EPLL_CON0_OFFSET]
+ ldr r1, =0x0
+ str r1, [r0, #EPLL_CON1_OFFSET]
+
+ /* APLL, MPLL, EPLL select to Fout */
+ ldr r1, [r0, #CLK_SRC_OFFSET]
+ orr r1, r1, #0x7
+ str r1, [r0, #CLK_SRC_OFFSET]
+
+ /* wait at least 200us to stablize all clock */
+ mov r1, #0x10000
+1: subs r1, r1, #1
+ bne 1b
+
+ /* Synchronization for VIC port */
+#if defined(CONFIG_SYNC_MODE)
+ ldr r1, [r0, #OTHERS_OFFSET]
+ orr r1, r1, #0x20
+ str r1, [r0, #OTHERS_OFFSET]
+#elif !defined(CONFIG_S3C6400)
+ /* According to 661558um_S3C6400X_rev10.pdf 0x20 is reserved */
+ ldr r1, [r0, #OTHERS_OFFSET]
+ bic r1, r1, #0x20
+ str r1, [r0, #OTHERS_OFFSET]
+#endif
+ mov pc, lr
+
+
+#ifndef CONFIG_NAND_SPL
+/*
+ * uart_asm_init: Initialize UART's pins
+ */
+uart_asm_init:
+ /* set GPIO to enable UART */
+ ldr r0, =ELFIN_GPIO_BASE
+ ldr r1, =0x220022
+ str r1, [r0, #GPACON_OFFSET]
+ mov pc, lr
+#endif
+
+#ifdef CONFIG_BOOT_NAND
+/*
+ * NAND Interface init for SMDK6400
+ */
+nand_asm_init:
+ ldr r0, =ELFIN_NAND_BASE
+ ldr r1, [r0, #NFCONF_OFFSET]
+ orr r1, r1, #0x70
+ orr r1, r1, #0x7700
+ str r1, [r0, #NFCONF_OFFSET]
+
+ ldr r1, [r0, #NFCONT_OFFSET]
+ orr r1, r1, #0x07
+ str r1, [r0, #NFCONT_OFFSET]
+
+ mov pc, lr
+#endif
+
+#ifdef CONFIG_ENABLE_MMU
+/*
+ * MMU Table for SMDK6400
+ */
+
+ /* form a first-level section entry */
+.macro FL_SECTION_ENTRY base,ap,d,c,b
+ .word (\base << 20) | (\ap << 10) | \
+ (\d << 5) | (1<<4) | (\c << 3) | (\b << 2) | (1<<1)
+.endm
+
+.section .mmudata, "a"
+ .align 14
+ /* the following alignment creates the mmu table at address 0x4000. */
+ .globl mmu_table
+mmu_table:
+ .set __base, 0
+ /* 1:1 mapping for debugging */
+ .rept 0xA00
+ FL_SECTION_ENTRY __base, 3, 0, 0, 0
+ .set __base, __base + 1
+ .endr
+
+ /* access is not allowed. */
+ .rept 0xC00 - 0xA00
+ .word 0x00000000
+ .endr
+
+ /* 128MB for SDRAM 0xC0000000 -> 0x50000000 */
+ .set __base, 0x500
+ .rept 0xC80 - 0xC00
+ FL_SECTION_ENTRY __base, 3, 0, 1, 1
+ .set __base, __base + 1
+ .endr
+
+ /* access is not allowed. */
+ .rept 0x1000 - 0xc80
+ .word 0x00000000
+ .endr
+#endif
diff --git a/board/samsung/smdk6400/smdk6400.c b/board/samsung/smdk6400/smdk6400.c
new file mode 100644
index 0000000..77fd2c8
--- /dev/null
+++ b/board/samsung/smdk6400/smdk6400.c
@@ -0,0 +1,130 @@
+/*
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
+ *
+ * (C) Copyright 2008
+ * Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <s3c6400.h>
+
+/* ------------------------------------------------------------------------- */
+#define CS8900_Tacs 0x0 /* 0clk address set-up */
+#define CS8900_Tcos 0x4 /* 4clk chip selection set-up */
+#define CS8900_Tacc 0xE /* 14clk access cycle */
+#define CS8900_Tcoh 0x1 /* 1clk chip selection hold */
+#define CS8900_Tah 0x4 /* 4clk address holding time */
+#define CS8900_Tacp 0x6 /* 6clk page mode access cycle */
+#define CS8900_PMC 0x0 /* normal(1data)page mode configuration */
+
+static inline void delay(unsigned long loops)
+{
+ __asm__ volatile ("1:\n" "subs %0, %1, #1\n"
+ "bne 1b"
+ : "=r" (loops) : "0" (loops));
+}
+
+/*
+ * Miscellaneous platform dependent initialisations
+ */
+
+static void cs8900_pre_init(void)
+{
+ SROM_BW_REG &= ~(0xf << 4);
+ SROM_BW_REG |= (1 << 7) | (1 << 6) | (1 << 4);
+ SROM_BC1_REG = ((CS8900_Tacs << 28) + (CS8900_Tcos << 24) +
+ (CS8900_Tacc << 16) + (CS8900_Tcoh << 12) +
+ (CS8900_Tah << 8) + (CS8900_Tacp << 4) + CS8900_PMC);
+}
+
+int board_init(void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ cs8900_pre_init();
+
+ /* NOR-flash in SROM0 */
+
+ /* Enable WAIT */
+ SROM_BW_REG |= 4 | 8 | 1;
+
+ gd->bd->bi_arch_number = MACH_TYPE;
+ gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
+
+ return 0;
+}
+
+int dram_init(void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+ gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+
+ return 0;
+}
+
+#ifdef CONFIG_DISPLAY_BOARDINFO
+int checkboard(void)
+{
+ printf("Board: SMDK6400\n");
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_ENABLE_MMU
+ulong virt_to_phy_smdk6400(ulong addr)
+{
+ if ((0xc0000000 <= addr) && (addr < 0xc8000000))
+ return addr - 0xc0000000 + 0x50000000;
+ else
+ printf("do not support this address : %08lx\n", addr);
+
+ return addr;
+}
+#endif
+
+#if defined(CONFIG_CMD_NAND) && defined(CFG_NAND_LEGACY)
+#include <linux/mtd/nand.h>
+extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE];
+void nand_init(void)
+{
+ nand_probe(CFG_NAND_BASE);
+ if (nand_dev_desc[0].ChipID != NAND_ChipID_UNKNOWN)
+ print_size(nand_dev_desc[0].totlen, "\n");
+}
+#endif
+
+ulong board_flash_get_legacy (ulong base, int banknum, flash_info_t *info)
+{
+ if (banknum == 0) { /* non-CFI boot flash */
+ info->portwidth = FLASH_CFI_16BIT;
+ info->chipwidth = FLASH_CFI_BY16;
+ info->interface = FLASH_CFI_X16;
+ return 1;
+ } else
+ return 0;
+}
diff --git a/board/samsung/smdk6400/u-boot-nand.lds b/board/samsung/smdk6400/u-boot-nand.lds
new file mode 100644
index 0000000..132ab21
--- /dev/null
+++ b/board/samsung/smdk6400/u-boot-nand.lds
@@ -0,0 +1,62 @@
+/*
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+ *
+ * (C) Copyright 2008
+ * Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+ . = 0x00000000;
+
+ . = ALIGN(4);
+ .text :
+ {
+ cpu/arm1176/start.o (.text)
+ cpu/arm1176/s3c64xx/cpu_init.o (.text)
+ *(.text)
+ }
+
+ . = ALIGN(4);
+ .rodata : { *(.rodata) }
+
+ . = ALIGN(4);
+ .data : { *(.data) }
+
+ . = ALIGN(4);
+ .got : { *(.got) }
+
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ .mmudata : { *(.mmudata) }
+
+ . = ALIGN(4);
+ __bss_start = .;
+ .bss : { *(.bss) }
+ _end = .;
+}
diff --git a/cpu/arm1176/Makefile b/cpu/arm1176/Makefile
new file mode 100644
index 0000000..1ca9199
--- /dev/null
+++ b/cpu/arm1176/Makefile
@@ -0,0 +1,50 @@
+#
+# (C) Copyright 2000-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# (C) Copyright 2008
+# Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(CPU).a
+
+START = start.o
+COBJS = cpu.o
+
+SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS))
+START := $(addprefix $(obj),$(START))
+
+all: $(obj).depend $(START) $(LIB)
+
+$(LIB): $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/cpu/arm1176/config.mk b/cpu/arm1176/config.mk
new file mode 100644
index 0000000..5083594
--- /dev/null
+++ b/cpu/arm1176/config.mk
@@ -0,0 +1,35 @@
+#
+# (C) Copyright 2002
+# Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+PLATFORM_RELFLAGS += -fno-strict-aliasing -fno-common -ffixed-r8 \
+ -msoft-float
+
+# Make ARMv5 to allow more compilers to work, even though its v6.
+PLATFORM_CPPFLAGS += -march=armv5t
+# =========================================================================
+#
+# Supply options according to compiler version
+#
+# =========================================================================
+PLATFORM_CPPFLAGS +=$(call cc-option,-mapcs-32,-mabi=apcs-gnu)
+PLATFORM_CPPFLAGS +=$(call cc-option,-mno-thumb-interwork,)
+PLATFORM_RELFLAGS +=$(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,))
diff --git a/cpu/arm1176/cpu.c b/cpu/arm1176/cpu.c
new file mode 100644
index 0000000..1e94f7d
--- /dev/null
+++ b/cpu/arm1176/cpu.c
@@ -0,0 +1,188 @@
+/*
+ * (C) Copyright 2004 Texas Insturments
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * CPU specific code
+ */
+
+#include <common.h>
+#include <command.h>
+#include <s3c6400.h>
+
+static void cache_flush (void);
+
+/* read co-processor 15, register #1 (control register) */
+static unsigned long read_p15_c1 (void)
+{
+ unsigned long value;
+
+ __asm__ __volatile__(
+ "mrc p15, 0, %0, c1, c0, 0 @ read control reg\n"
+ : "=r" (value)
+ :
+ : "memory");
+ return value;
+}
+
+/* write to co-processor 15, register #1 (control register) */
+static void write_p15_c1 (unsigned long value)
+{
+ __asm__ __volatile__(
+ "mcr p15, 0, %0, c1, c0, 0 @ write it back\n"
+ :
+ : "r" (value)
+ : "memory");
+
+ read_p15_c1();
+}
+
+static void cp_delay (void)
+{
+ volatile int i;
+
+ /* Many OMAP regs need at least 2 nops */
+ for (i = 0; i < 100; i++)
+ __asm__ __volatile__("nop\n");
+}
+
+/* See also ARM Ref. Man. */
+#define C1_MMU (1 << 0) /* mmu off/on */
+#define C1_ALIGN (1 << 1) /* alignment faults off/on */
+#define C1_DC (1 << 2) /* dcache off/on */
+#define C1_WB (1 << 3) /* merging write buffer on/off */
+#define C1_BIG_ENDIAN (1 << 7) /* big endian off/on */
+#define C1_SYS_PROT (1 << 8) /* system protection */
+#define C1_ROM_PROT (1 << 9) /* ROM protection */
+#define C1_IC (1 << 12) /* icache off/on */
+#define C1_HIGH_VECTORS (1 << 13) /* location of vectors: low/high */
+#define RESERVED_1 (0xf << 3) /* must be 111b for R/W */
+
+int cpu_init (void)
+{
+ return 0;
+}
+
+int cleanup_before_linux (void)
+{
+ /*
+ * this function is called just before we call linux
+ * it prepares the processor for linux
+ *
+ * we turn off caches etc ...
+ */
+
+ disable_interrupts ();
+
+ /* turn off I/D-cache */
+ icache_disable();
+ dcache_disable();
+ cache_flush();
+
+ return 0;
+}
+
+
+/* * reset the cpu by setting up the watchdog timer and let him time out */
+void reset_cpu (ulong ignored)
+{
+ printf("reset... \n\n\n");
+ SW_RST_REG = 0x6400;
+ /* loop forever and wait for reset to happen */
+ while (1) {
+ if (serial_tstc()) {
+ serial_getc();
+ break;
+ }
+ }
+ /*NOTREACHED*/
+}
+
+int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ disable_interrupts ();
+ reset_cpu (0);
+ /*NOTREACHED*/
+ return 0;
+}
+
+void icache_enable (void)
+{
+ ulong reg;
+
+ reg = read_p15_c1 (); /* get control reg. */
+ cp_delay ();
+ write_p15_c1 (reg | C1_IC);
+}
+
+void icache_disable (void)
+{
+ ulong reg;
+
+ reg = read_p15_c1 ();
+ cp_delay ();
+ write_p15_c1 (reg & ~C1_IC);
+}
+
+int icache_status (void)
+{
+ return (read_p15_c1 () & C1_IC) != 0;
+}
+
+/* It makes no sense to use the dcache if the MMU is not enabled */
+void dcache_enable (void)
+{
+ ulong reg;
+
+ reg = read_p15_c1 ();
+ cp_delay ();
+ write_p15_c1 (reg | C1_DC);
+}
+
+void dcache_disable (void)
+{
+ ulong reg;
+
+ reg = read_p15_c1 ();
+ cp_delay ();
+ write_p15_c1 (reg & ~C1_DC);
+}
+
+int dcache_status (void)
+{
+ return (read_p15_c1 () & C1_DC) != 0;
+}
+
+/* flush I/D-cache */
+static void cache_flush (void)
+{
+ /* invalidate both caches and flush btb */
+ asm ("mcr p15, 0, %0, c7, c7, 0": :"r" (0));
+ /* mem barrier to sync things */
+ asm ("mcr p15, 0, %0, c7, c10, 4": :"r" (0));
+}
diff --git a/cpu/arm1176/s3c64xx/Makefile b/cpu/arm1176/s3c64xx/Makefile
new file mode 100644
index 0000000..4ab1811
--- /dev/null
+++ b/cpu/arm1176/s3c64xx/Makefile
@@ -0,0 +1,49 @@
+#
+# (C) Copyright 2000-2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# (C) Copyright 2008
+# Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(SOC).a
+
+COBJS-y = interrupts.o
+COBJS-$(CONFIG_S3C6400) += cpu_init.o speed.o
+COBJS-$(CONFIG_USB_OHCI_NEW) += usb.o
+
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS-y))
+
+all: $(obj).depend $(START) $(LIB)
+
+$(LIB): $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/cpu/arm1176/s3c64xx/config.mk b/cpu/arm1176/s3c64xx/config.mk
new file mode 100644
index 0000000..204e880
--- /dev/null
+++ b/cpu/arm1176/s3c64xx/config.mk
@@ -0,0 +1,34 @@
+#
+# (C) Copyright 2002
+# Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+PLATFORM_RELFLAGS += -fno-strict-aliasing -fno-common -ffixed-r8 \
+ -msoft-float
+
+# Make ARMv5 to allow more compilers to work, even though its v6.
+PLATFORM_CPPFLAGS += -march=armv5t
+# =========================================================================
+#
+# Supply options according to compiler version
+#
+# =========================================================================
+#PLATFORM_CPPFLAGS +=$(call cc-option,-mapcs-32,-mabi=apcs-gnu)
+PLATFORM_RELFLAGS +=$(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,))
diff --git a/cpu/arm1176/s3c64xx/cpu_init.S b/cpu/arm1176/s3c64xx/cpu_init.S
new file mode 100644
index 0000000..08bda99
--- /dev/null
+++ b/cpu/arm1176/s3c64xx/cpu_init.S
@@ -0,0 +1,142 @@
+/*
+ * Originates from Samsung's u-boot 1.1.6 port to S3C6400 / SMDK6400
+ *
+ * Copyright (C) 2008
+ * Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <s3c6400.h>
+
+ .globl mem_ctrl_asm_init
+mem_ctrl_asm_init:
+ /* Memory subsystem address 0x7e00f120 */
+ ldr r0, =ELFIN_MEM_SYS_CFG
+
+ /* Xm0CSn2 = NFCON CS0, Xm0CSn3 = NFCON CS1 */
+ mov r1, #0xd
+ str r1, [r0]
+
+ /* DMC1 base address 0x7e001000 */
+ ldr r0, =ELFIN_DMC1_BASE
+
+ ldr r1, =0x4
+ str r1, [r0, #INDEX_DMC_MEMC_CMD]
+
+ ldr r1, =DMC_DDR_REFRESH_PRD
+ str r1, [r0, #INDEX_DMC_REFRESH_PRD]
+
+ ldr r1, =DMC_DDR_CAS_LATENCY
+ str r1, [r0, #INDEX_DMC_CAS_LATENCY]
+
+ ldr r1, =DMC_DDR_t_DQSS
+ str r1, [r0, #INDEX_DMC_T_DQSS]
+
+ ldr r1, =DMC_DDR_t_MRD
+ str r1, [r0, #INDEX_DMC_T_MRD]
+
+ ldr r1, =DMC_DDR_t_RAS
+ str r1, [r0, #INDEX_DMC_T_RAS]
+
+ ldr r1, =DMC_DDR_t_RC
+ str r1, [r0, #INDEX_DMC_T_RC]
+
+ ldr r1, =DMC_DDR_t_RCD
+ ldr r2, =DMC_DDR_schedule_RCD
+ orr r1, r1, r2
+ str r1, [r0, #INDEX_DMC_T_RCD]
+
+ ldr r1, =DMC_DDR_t_RFC
+ ldr r2, =DMC_DDR_schedule_RFC
+ orr r1, r1, r2
+ str r1, [r0, #INDEX_DMC_T_RFC]
+
+ ldr r1, =DMC_DDR_t_RP
+ ldr r2, =DMC_DDR_schedule_RP
+ orr r1, r1, r2
+ str r1, [r0, #INDEX_DMC_T_RP]
+
+ ldr r1, =DMC_DDR_t_RRD
+ str r1, [r0, #INDEX_DMC_T_RRD]
+
+ ldr r1, =DMC_DDR_t_WR
+ str r1, [r0, #INDEX_DMC_T_WR]
+
+ ldr r1, =DMC_DDR_t_WTR
+ str r1, [r0, #INDEX_DMC_T_WTR]
+
+ ldr r1, =DMC_DDR_t_XP
+ str r1, [r0, #INDEX_DMC_T_XP]
+
+ ldr r1, =DMC_DDR_t_XSR
+ str r1, [r0, #INDEX_DMC_T_XSR]
+
+ ldr r1, =DMC_DDR_t_ESR
+ str r1, [r0, #INDEX_DMC_T_ESR]
+
+ ldr r1, =DMC1_MEM_CFG
+ str r1, [r0, #INDEX_DMC_MEMORY_CFG]
+
+ ldr r1, =DMC1_MEM_CFG2
+ str r1, [r0, #INDEX_DMC_MEMORY_CFG2]
+
+ ldr r1, =DMC1_CHIP0_CFG
+ str r1, [r0, #INDEX_DMC_CHIP_0_CFG]
+
+ ldr r1, =DMC_DDR_32_CFG
+ str r1, [r0, #INDEX_DMC_USER_CONFIG]
+
+ /* DMC0 DDR Chip 0 configuration direct command reg */
+ ldr r1, =DMC_NOP0
+ str r1, [r0, #INDEX_DMC_DIRECT_CMD]
+
+ /* Precharge All */
+ ldr r1, =DMC_PA0
+ str r1, [r0, #INDEX_DMC_DIRECT_CMD]
+
+ /* Auto Refresh 2 time */
+ ldr r1, =DMC_AR0
+ str r1, [r0, #INDEX_DMC_DIRECT_CMD]
+ str r1, [r0, #INDEX_DMC_DIRECT_CMD]
+
+ /* MRS */
+ ldr r1, =DMC_mDDR_EMR0
+ str r1, [r0, #INDEX_DMC_DIRECT_CMD]
+
+ /* Mode Reg */
+ ldr r1, =DMC_mDDR_MR0
+ str r1, [r0, #INDEX_DMC_DIRECT_CMD]
+
+ /* Enable DMC1 */
+ mov r1, #0x0
+ str r1, [r0, #INDEX_DMC_MEMC_CMD]
+
+check_dmc1_ready:
+ ldr r1, [r0, #INDEX_DMC_MEMC_STATUS]
+ mov r2, #0x3
+ and r1, r1, r2
+ cmp r1, #0x1
+ bne check_dmc1_ready
+ nop
+
+ mov pc, lr
+
+ .ltorg
diff --git a/cpu/arm1176/s3c64xx/interrupts.c b/cpu/arm1176/s3c64xx/interrupts.c
new file mode 100644
index 0000000..8356ae4
--- /dev/null
+++ b/cpu/arm1176/s3c64xx/interrupts.c
@@ -0,0 +1,174 @@
+/*
+ * (C) Copyright 2003
+ * Texas Instruments <www.ti.com>
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Alex Zuepke <azu@sysgo.de>
+ *
+ * (C) Copyright 2002-2004
+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+ *
+ * (C) Copyright 2004
+ * Philippe Robin, ARM Ltd. <philippe.robin@arm.com>
+ *
+ * (C) Copyright 2008
+ * Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/proc-armv/ptrace.h>
+#include <s3c6400.h>
+
+static ulong timer_load_val;
+
+#define PRESCALER 167
+
+static s3c64xx_timers *s3c64xx_get_base_timers(void)
+{
+ return (s3c64xx_timers *)ELFIN_TIMER_BASE;
+}
+
+/* macro to read the 16 bit timer */
+static inline ulong read_timer(void)
+{
+ s3c64xx_timers *const timers = s3c64xx_get_base_timers();
+
+ return timers->TCNTO4;
+}
+
+/* Internal tick units */
+/* Last decremneter snapshot */
+static unsigned long lastdec;
+/* Monotonic incrementing timer */
+static unsigned long long timestamp;
+
+int interrupt_init(void)
+{
+ s3c64xx_timers *const timers = s3c64xx_get_base_timers();
+
+ /* use PWM Timer 4 because it has no output */
+ /*
+ * We use the following scheme for the timer:
+ * Prescaler is hard fixed at 167, divider at 1/4.
+ * This gives at PCLK frequency 66MHz approx. 10us ticks
+ * The timer is set to wrap after 100s, at 66MHz this obviously
+ * happens after 10,000,000 ticks. A long variable can thus
+ * keep values up to 40,000s, i.e., 11 hours. This should be
+ * enough for most uses:-) Possible optimizations: select a
+ * binary-friendly frequency, e.g., 1ms / 128. Also calculate
+ * the prescaler automatically for other PCLK frequencies.
+ */
+ timers->TCFG0 = PRESCALER << 8;
+ if (timer_load_val == 0) {
+ timer_load_val = get_PCLK() / PRESCALER * (100 / 4); /* 100s */
+ timers->TCFG1 = (timers->TCFG1 & ~0xf0000) | 0x20000;
+ }
+
+ /* load value for 10 ms timeout */
+ lastdec = timers->TCNTB4 = timer_load_val;
+ /* auto load, manual update of Timer 4 */
+ timers->TCON = (timers->TCON & ~0x00700000) | TCON_4_AUTO |
+ TCON_4_UPDATE;
+
+ /* auto load, start Timer 4 */
+ timers->TCON = (timers->TCON & ~0x00700000) | TCON_4_AUTO | COUNT_4_ON;
+ timestamp = 0;
+
+ return 0;
+}
+
+/*
+ * timer without interrupts
+ */
+
+/*
+ * This function is derived from PowerPC code (read timebase as long long).
+ * On ARM it just returns the timer value.
+ */
+unsigned long long get_ticks(void)
+{
+ ulong now = read_timer();
+
+ if (lastdec >= now) {
+ /* normal mode */
+ timestamp += lastdec - now;
+ } else {
+ /* we have an overflow ... */
+ timestamp += lastdec + timer_load_val - now;
+ }
+ lastdec = now;
+
+ return timestamp;
+}
+
+/*
+ * This function is derived from PowerPC code (timebase clock frequency).
+ * On ARM it returns the number of timer ticks per second.
+ */
+ulong get_tbclk(void)
+{
+ /* We overrun in 100s */
+ return (ulong)(timer_load_val / 100);
+}
+
+void reset_timer_masked(void)
+{
+ /* reset time */
+ lastdec = read_timer();
+ timestamp = 0;
+}
+
+void reset_timer(void)
+{
+ reset_timer_masked();
+}
+
+ulong get_timer_masked(void)
+{
+ return get_ticks() / (timer_load_val / (100 * CFG_HZ));
+}
+
+ulong get_timer(ulong base)
+{
+ return get_timer_masked() - base;
+}
+
+void set_timer(ulong t)
+{
+ timestamp = t * (timer_load_val / (100 * CFG_HZ));
+}
+
+void udelay(unsigned long usec)
+{
+ unsigned long long tmp;
+ ulong tmo;
+
+ tmo = (usec + 9) / 10;
+ tmp = get_ticks() + tmo; /* get current timestamp */
+
+ while (get_ticks() < tmp)/* loop till event */
+ /*NOP*/;
+}
diff --git a/cpu/arm1176/s3c64xx/speed.c b/cpu/arm1176/s3c64xx/speed.c
new file mode 100644
index 0000000..5c335a5
--- /dev/null
+++ b/cpu/arm1176/s3c64xx/speed.c
@@ -0,0 +1,145 @@
+/*
+ * (C) Copyright 2001-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2002
+ * David Mueller, ELSOFT AG, d.mueller@elsoft.ch
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * This code should work for both the S3C2400 and the S3C2410
+ * as they seem to have the same PLL and clock machinery inside.
+ * The different address mapping is handled by the s3c24xx.h files below.
+ */
+
+#include <common.h>
+#include <s3c6400.h>
+
+#define APLL 0
+#define MPLL 1
+#define EPLL 2
+
+/* ------------------------------------------------------------------------- */
+/*
+ * NOTE: This describes the proper use of this file.
+ *
+ * CONFIG_SYS_CLK_FREQ should be defined as the input frequency of the PLL.
+ *
+ * get_FCLK(), get_HCLK(), get_PCLK() and get_UCLK() return the clock of
+ * the specified bus in HZ.
+ */
+/* ------------------------------------------------------------------------- */
+
+static ulong get_PLLCLK(int pllreg)
+{
+ ulong r, m, p, s;
+
+ switch (pllreg) {
+ case APLL:
+ r = APLL_CON_REG;
+ break;
+ case MPLL:
+ r = MPLL_CON_REG;
+ break;
+ case EPLL:
+ r = EPLL_CON0_REG;
+ break;
+ default:
+ hang();
+ }
+
+ m = (r >> 16) & 0x3ff;
+ p = (r >> 8) & 0x3f;
+ s = r & 0x7;
+
+ return m * (CONFIG_SYS_CLK_FREQ / (p * (1 << s)));
+}
+
+/* return ARMCORE frequency */
+ulong get_ARMCLK(void)
+{
+ ulong div;
+
+ div = CLK_DIV0_REG;
+
+ return get_PLLCLK(APLL) / ((div & 0x7) + 1);
+}
+
+/* return FCLK frequency */
+ulong get_FCLK(void)
+{
+ return get_PLLCLK(APLL);
+}
+
+/* return HCLK frequency */
+ulong get_HCLK(void)
+{
+ ulong fclk;
+
+ uint hclkx2_div = ((CLK_DIV0_REG >> 9) & 0x7) + 1;
+ uint hclk_div = ((CLK_DIV0_REG >> 8) & 0x1) + 1;
+
+ /*
+ * Bit 7 exists on s3c6410, and not on s3c6400, it is reserved on
+ * s3c6400 and is always 0, and it is indeed running in ASYNC mode
+ */
+ if (OTHERS_REG & 0x80)
+ fclk = get_FCLK(); /* SYNC Mode */
+ else
+ fclk = get_PLLCLK(MPLL); /* ASYNC Mode */
+
+ return fclk / (hclk_div * hclkx2_div);
+}
+
+/* return PCLK frequency */
+ulong get_PCLK(void)
+{
+ ulong fclk;
+ uint hclkx2_div = ((CLK_DIV0_REG >> 9) & 0x7) + 1;
+ uint pre_div = ((CLK_DIV0_REG >> 12) & 0xf) + 1;
+
+ if (OTHERS_REG & 0x80)
+ fclk = get_FCLK(); /* SYNC Mode */
+ else
+ fclk = get_PLLCLK(MPLL); /* ASYNC Mode */
+
+ return fclk / (hclkx2_div * pre_div);
+}
+
+/* return UCLK frequency */
+ulong get_UCLK(void)
+{
+ return get_PLLCLK(EPLL);
+}
+
+int print_cpuinfo(void)
+{
+ printf("\nCPU: S3C6400@%luMHz\n", get_ARMCLK() / 1000000);
+ printf(" Fclk = %luMHz, Hclk = %luMHz, Pclk = %luMHz ",
+ get_FCLK() / 1000000, get_HCLK() / 1000000,
+ get_PCLK() / 1000000);
+
+ if (OTHERS_REG & 0x80)
+ printf("(SYNC Mode) \n");
+ else
+ printf("(ASYNC Mode) \n");
+ return 0;
+}
diff --git a/board/integratorcp/memsetup.S b/cpu/arm1176/s3c64xx/usb.c
index da43cb6..274a4ed 100644
--- a/board/integratorcp/memsetup.S
+++ b/cpu/arm1176/s3c64xx/usb.c
@@ -1,5 +1,8 @@
/*
- * Memory setup for integratorAP
+ * URB OHCI HCD (Host Controller Driver) initialization for USB on the S3C64XX.
+ *
+ * Copyright (C) 2008,
+ * Guennadi Liakhovetski, DENX Software Engineering <lg@denx.de>
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -18,12 +21,25 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
+ *
*/
-/*
- * Memory setup
- * - the reset defaults are assumed sufficient
- */
-.globl memsetup
-memsetup:
- mov pc,lr
+#include <common.h>
+#include <s3c6400.h>
+
+int usb_cpu_init(void)
+{
+ OTHERS_REG |= 0x10000;
+ return 0;
+}
+
+int usb_cpu_stop(void)
+{
+ OTHERS_REG &= ~0x10000;
+ return 0;
+}
+
+void usb_cpu_init_fail(void)
+{
+ OTHERS_REG &= ~0x10000;
+}
diff --git a/cpu/arm1176/start.S b/cpu/arm1176/start.S
new file mode 100644
index 0000000..991277f
--- /dev/null
+++ b/cpu/arm1176/start.S
@@ -0,0 +1,469 @@
+/*
+ * armboot - Startup Code for S3C6400/ARM1176 CPU-core
+ *
+ * Copyright (c) 2007 Samsung Electronics
+ *
+ * Copyright (C) 2008
+ * Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * 2007-09-21 - Restructured codes by jsgood (jsgood.yang@samsung.com)
+ * 2007-09-21 - Added MoviNAND and OneNAND boot codes by
+ * jsgood (jsgood.yang@samsung.com)
+ * Base codes by scsuh (sc.suh)
+ */
+
+#include <config.h>
+#include <version.h>
+#ifdef CONFIG_ENABLE_MMU
+#include <asm/proc/domain.h>
+#endif
+#include <s3c6400.h>
+
+#if !defined(CONFIG_ENABLE_MMU) && !defined(CFG_PHY_UBOOT_BASE)
+#define CFG_PHY_UBOOT_BASE CFG_UBOOT_BASE
+#endif
+
+/*
+ *************************************************************************
+ *
+ * Jump vector table as in table 3.1 in [1]
+ *
+ *************************************************************************
+ */
+
+.globl _start
+_start: b reset
+#ifndef CONFIG_NAND_SPL
+ ldr pc, _undefined_instruction
+ ldr pc, _software_interrupt
+ ldr pc, _prefetch_abort
+ ldr pc, _data_abort
+ ldr pc, _not_used
+ ldr pc, _irq
+ ldr pc, _fiq
+
+_undefined_instruction:
+ .word undefined_instruction
+_software_interrupt:
+ .word software_interrupt
+_prefetch_abort:
+ .word prefetch_abort
+_data_abort:
+ .word data_abort
+_not_used:
+ .word not_used
+_irq:
+ .word irq
+_fiq:
+ .word fiq
+_pad:
+ .word 0x12345678 /* now 16*4=64 */
+#else
+ . = _start + 64
+#endif
+
+.global _end_vect
+_end_vect:
+ .balignl 16,0xdeadbeef
+/*
+ *************************************************************************
+ *
+ * Startup Code (reset vector)
+ *
+ * do important init only if we don't start from memory!
+ * setup Memory and board specific bits prior to relocation.
+ * relocate armboot to ram
+ * setup stack
+ *
+ *************************************************************************
+ */
+
+_TEXT_BASE:
+ .word TEXT_BASE
+
+/*
+ * Below variable is very important because we use MMU in U-Boot.
+ * Without it, we cannot run code correctly before MMU is ON.
+ * by scsuh.
+ */
+_TEXT_PHY_BASE:
+ .word CFG_PHY_UBOOT_BASE
+
+.globl _armboot_start
+_armboot_start:
+ .word _start
+
+/*
+ * These are defined in the board-specific linker script.
+ */
+.globl _bss_start
+_bss_start:
+ .word __bss_start
+
+.globl _bss_end
+_bss_end:
+ .word _end
+
+/*
+ * the actual reset code
+ */
+
+reset:
+ /*
+ * set the cpu to SVC32 mode
+ */
+ mrs r0, cpsr
+ bic r0, r0, #0x3f
+ orr r0, r0, #0xd3
+ msr cpsr, r0
+
+/*
+ *************************************************************************
+ *
+ * CPU_init_critical registers
+ *
+ * setup important registers
+ * setup memory timing
+ *
+ *************************************************************************
+ */
+ /*
+ * we do sys-critical inits only at reboot,
+ * not when booting from ram!
+ */
+cpu_init_crit:
+ /*
+ * When booting from NAND - it has definitely been a reset, so, no need
+ * to flush caches and disable the MMU
+ */
+#ifndef CONFIG_NAND_SPL
+ /*
+ * flush v4 I/D caches
+ */
+ mov r0, #0
+ mcr p15, 0, r0, c7, c7, 0 /* flush v3/v4 cache */
+ mcr p15, 0, r0, c8, c7, 0 /* flush v4 TLB */
+
+ /*
+ * disable MMU stuff and caches
+ */
+ mrc p15, 0, r0, c1, c0, 0
+ bic r0, r0, #0x00002300 @ clear bits 13, 9:8 (--V- --RS)
+ bic r0, r0, #0x00000087 @ clear bits 7, 2:0 (B--- -CAM)
+ orr r0, r0, #0x00000002 @ set bit 2 (A) Align
+ orr r0, r0, #0x00001000 @ set bit 12 (I) I-Cache
+ /* Prepare to disable the MMU */
+ adr r1, mmu_disable_phys
+ /* We presume we're within the first 1024 bytes */
+ and r1, r1, #0x3fc
+ ldr r2, _TEXT_PHY_BASE
+ ldr r3, =0xfff00000
+ and r2, r2, r3
+ orr r2, r2, r1
+ b mmu_disable
+
+ .align 5
+ /* Run in a single cache-line */
+mmu_disable:
+ mcr p15, 0, r0, c1, c0, 0
+ nop
+ nop
+ mov pc, r2
+#endif
+
+mmu_disable_phys:
+ /* Peri port setup */
+ ldr r0, =0x70000000
+ orr r0, r0, #0x13
+ mcr p15,0,r0,c15,c2,4 @ 256M (0x70000000 - 0x7fffffff)
+
+ /*
+ * Go setup Memory and board specific bits prior to relocation.
+ */
+ bl lowlevel_init /* go setup pll,mux,memory */
+
+after_copy:
+#ifdef CONFIG_ENABLE_MMU
+enable_mmu:
+ /* enable domain access */
+ ldr r5, =0x0000ffff
+ mcr p15, 0, r5, c3, c0, 0 /* load domain access register */
+
+ /* Set the TTB register */
+ ldr r0, _mmu_table_base
+ ldr r1, =CFG_PHY_UBOOT_BASE
+ ldr r2, =0xfff00000
+ bic r0, r0, r2
+ orr r1, r0, r1
+ mcr p15, 0, r1, c2, c0, 0
+
+ /* Enable the MMU */
+ mrc p15, 0, r0, c1, c0, 0
+ orr r0, r0, #1 /* Set CR_M to enable MMU */
+
+ /* Prepare to enable the MMU */
+ adr r1, skip_hw_init
+ and r1, r1, #0x3fc
+ ldr r2, _TEXT_BASE
+ ldr r3, =0xfff00000
+ and r2, r2, r3
+ orr r2, r2, r1
+ b mmu_enable
+
+ .align 5
+ /* Run in a single cache-line */
+mmu_enable:
+
+ mcr p15, 0, r0, c1, c0, 0
+ nop
+ nop
+ mov pc, r2
+#endif
+
+skip_hw_init:
+ /* Set up the stack */
+stack_setup:
+#ifdef CONFIG_MEMORY_UPPER_CODE
+ ldr sp, =(CFG_UBOOT_BASE + CFG_UBOOT_SIZE - 0xc)
+#else
+ ldr r0, _TEXT_BASE /* upper 128 KiB: relocated uboot */
+ sub r0, r0, #CFG_MALLOC_LEN /* malloc area */
+ sub r0, r0, #CFG_GBL_DATA_SIZE /* bdinfo */
+ sub sp, r0, #12 /* leave 3 words for abort-stack */
+
+#endif
+
+clear_bss:
+ ldr r0, _bss_start /* find start of bss segment */
+ ldr r1, _bss_end /* stop here */
+ mov r2, #0 /* clear */
+
+clbss_l:
+ str r2, [r0] /* clear loop... */
+ add r0, r0, #4
+ cmp r0, r1
+ ble clbss_l
+
+#ifndef CONFIG_NAND_SPL
+ ldr pc, _start_armboot
+
+_start_armboot:
+ .word start_armboot
+#else
+ b nand_boot
+/* .word nand_boot*/
+#endif
+
+#ifdef CONFIG_ENABLE_MMU
+_mmu_table_base:
+ .word mmu_table
+#endif
+
+#ifndef CONFIG_NAND_SPL
+/*
+ * we assume that cache operation is done before. (eg. cleanup_before_linux())
+ * actually, we don't need to do anything about cache if not use d-cache in
+ * U-Boot. So, in this function we clean only MMU. by scsuh
+ *
+ * void theLastJump(void *kernel, int arch_num, uint boot_params);
+ */
+#ifdef CONFIG_ENABLE_MMU
+ .globl theLastJump
+theLastJump:
+ mov r9, r0
+ ldr r3, =0xfff00000
+ ldr r4, _TEXT_PHY_BASE
+ adr r5, phy_last_jump
+ bic r5, r5, r3
+ orr r5, r5, r4
+ mov pc, r5
+phy_last_jump:
+ /*
+ * disable MMU stuff
+ */
+ mrc p15, 0, r0, c1, c0, 0
+ bic r0, r0, #0x00002300 /* clear bits 13, 9:8 (--V- --RS) */
+ bic r0, r0, #0x00000087 /* clear bits 7, 2:0 (B--- -CAM) */
+ orr r0, r0, #0x00000002 /* set bit 2 (A) Align */
+ orr r0, r0, #0x00001000 /* set bit 12 (I) I-Cache */
+ mcr p15, 0, r0, c1, c0, 0
+
+ mcr p15, 0, r0, c8, c7, 0 /* flush v4 TLB */
+
+ mov r0, #0
+ mov pc, r9
+#endif
+/*
+ *************************************************************************
+ *
+ * Interrupt handling
+ *
+ *************************************************************************
+ */
+@
+@ IRQ stack frame.
+@
+#define S_FRAME_SIZE 72
+
+#define S_OLD_R0 68
+#define S_PSR 64
+#define S_PC 60
+#define S_LR 56
+#define S_SP 52
+
+#define S_IP 48
+#define S_FP 44
+#define S_R10 40
+#define S_R9 36
+#define S_R8 32
+#define S_R7 28
+#define S_R6 24
+#define S_R5 20
+#define S_R4 16
+#define S_R3 12
+#define S_R2 8
+#define S_R1 4
+#define S_R0 0
+
+#define MODE_SVC 0x13
+#define I_BIT 0x80
+
+/*
+ * use bad_save_user_regs for abort/prefetch/undef/swi ...
+ */
+
+ .macro bad_save_user_regs
+ /* carve out a frame on current user stack */
+ sub sp, sp, #S_FRAME_SIZE
+ /* Save user registers (now in svc mode) r0-r12 */
+ stmia sp, {r0 - r12}
+
+ ldr r2, _armboot_start
+ sub r2, r2, #(CFG_MALLOC_LEN)
+ /* set base 2 words into abort stack */
+ sub r2, r2, #(CFG_GBL_DATA_SIZE+8)
+ /* get values for "aborted" pc and cpsr (into parm regs) */
+ ldmia r2, {r2 - r3}
+ /* grab pointer to old stack */
+ add r0, sp, #S_FRAME_SIZE
+
+ add r5, sp, #S_SP
+ mov r1, lr
+ /* save sp_SVC, lr_SVC, pc, cpsr */
+ stmia r5, {r0 - r3}
+ /* save current stack into r0 (param register) */
+ mov r0, sp
+ .endm
+
+ .macro get_bad_stack
+ /* setup our mode stack (enter in banked mode) */
+ ldr r13, _armboot_start
+ /* move past malloc pool */
+ sub r13, r13, #(CFG_MALLOC_LEN)
+ /* move to reserved a couple spots for abort stack */
+ sub r13, r13, #(CFG_GBL_DATA_SIZE + 8)
+
+ /* save caller lr in position 0 of saved stack */
+ str lr, [r13]
+ /* get the spsr */
+ mrs lr, spsr
+ /* save spsr in position 1 of saved stack */
+ str lr, [r13, #4]
+
+ /* prepare SVC-Mode */
+ mov r13, #MODE_SVC
+ @ msr spsr_c, r13
+ /* switch modes, make sure moves will execute */
+ msr spsr, r13
+ /* capture return pc */
+ mov lr, pc
+ /* jump to next instruction & switch modes. */
+ movs pc, lr
+ .endm
+
+ .macro get_bad_stack_swi
+ /* space on current stack for scratch reg. */
+ sub r13, r13, #4
+ /* save R0's value. */
+ str r0, [r13]
+ /* get data regions start */
+ ldr r0, _armboot_start
+ /* move past malloc pool */
+ sub r0, r0, #(CFG_MALLOC_LEN)
+ /* move past gbl and a couple spots for abort stack */
+ sub r0, r0, #(CFG_GBL_DATA_SIZE + 8)
+ /* save caller lr in position 0 of saved stack */
+ str lr, [r0]
+ /* get the spsr */
+ mrs r0, spsr
+ /* save spsr in position 1 of saved stack */
+ str lr, [r0, #4]
+ /* restore r0 */
+ ldr r0, [r13]
+ /* pop stack entry */
+ add r13, r13, #4
+ .endm
+
+/*
+ * exception handlers
+ */
+ .align 5
+undefined_instruction:
+ get_bad_stack
+ bad_save_user_regs
+ bl do_undefined_instruction
+
+ .align 5
+software_interrupt:
+ get_bad_stack_swi
+ bad_save_user_regs
+ bl do_software_interrupt
+
+ .align 5
+prefetch_abort:
+ get_bad_stack
+ bad_save_user_regs
+ bl do_prefetch_abort
+
+ .align 5
+data_abort:
+ get_bad_stack
+ bad_save_user_regs
+ bl do_data_abort
+
+ .align 5
+not_used:
+ get_bad_stack
+ bad_save_user_regs
+ bl do_not_used
+
+ .align 5
+irq:
+ get_bad_stack
+ bad_save_user_regs
+ bl do_irq
+
+ .align 5
+fiq:
+ get_bad_stack
+ bad_save_user_regs
+ bl do_fiq
+#endif /* CONFIG_NAND_SPL */
diff --git a/cpu/arm926ejs/davinci/dp83848.c b/cpu/arm926ejs/davinci/dp83848.c
index 2aa9ef1..59f039b 100644
--- a/cpu/arm926ejs/davinci/dp83848.c
+++ b/cpu/arm926ejs/davinci/dp83848.c
@@ -38,9 +38,9 @@ int dp83848_is_phy_connected(int phy_addr)
{
u_int16_t id1, id2;
- if (!dm644x_eth_phy_read(phy_addr, DP83848_PHYID1_REG, &id1))
+ if (!davinci_eth_phy_read(phy_addr, DP83848_PHYID1_REG, &id1))
return(0);
- if (!dm644x_eth_phy_read(phy_addr, DP83848_PHYID2_REG, &id2))
+ if (!davinci_eth_phy_read(phy_addr, DP83848_PHYID2_REG, &id2))
return(0);
if ((id1 == DP83848_PHYID1_OUI) && (id2 == DP83848_PHYID2_OUI))
@@ -54,13 +54,13 @@ int dp83848_get_link_speed(int phy_addr)
u_int16_t tmp;
volatile emac_regs* emac = (emac_regs *)EMAC_BASE_ADDR;
- if (!dm644x_eth_phy_read(phy_addr, DP83848_STAT_REG, &tmp))
+ if (!davinci_eth_phy_read(phy_addr, DP83848_STAT_REG, &tmp))
return(0);
if (!(tmp & DP83848_LINK_STATUS)) /* link up? */
return(0);
- if (!dm644x_eth_phy_read(phy_addr, DP83848_PHY_STAT_REG, &tmp))
+ if (!davinci_eth_phy_read(phy_addr, DP83848_PHY_STAT_REG, &tmp))
return(0);
/* Speed doesn't matter, there is no setting for it in EMAC... */
@@ -101,7 +101,7 @@ int dp83848_init_phy(int phy_addr)
}
/* Disable PHY Interrupts */
- dm644x_eth_phy_write(phy_addr, DP83848_PHY_INTR_CTRL_REG, 0);
+ davinci_eth_phy_write(phy_addr, DP83848_PHY_INTR_CTRL_REG, 0);
return(ret);
}
@@ -112,13 +112,13 @@ int dp83848_auto_negotiate(int phy_addr)
u_int16_t tmp;
- if (!dm644x_eth_phy_read(phy_addr, DP83848_CTL_REG, &tmp))
+ if (!davinci_eth_phy_read(phy_addr, DP83848_CTL_REG, &tmp))
return(0);
/* Restart Auto_negotiation */
tmp &= ~DP83848_AUTONEG; /* remove autonegotiation enable */
tmp |= DP83848_ISOLATE; /* Electrically isolate PHY */
- dm644x_eth_phy_write(phy_addr, DP83848_CTL_REG, tmp);
+ davinci_eth_phy_write(phy_addr, DP83848_CTL_REG, tmp);
/* Set the Auto_negotiation Advertisement Register
* MII advertising for Next page, 100BaseTxFD and HD,
@@ -126,23 +126,23 @@ int dp83848_auto_negotiate(int phy_addr)
*/
tmp = DP83848_NP | DP83848_TX_FDX | DP83848_TX_HDX |
DP83848_10_FDX | DP83848_10_HDX | DP83848_AN_IEEE_802_3;
- dm644x_eth_phy_write(phy_addr, DP83848_ANA_REG, tmp);
+ davinci_eth_phy_write(phy_addr, DP83848_ANA_REG, tmp);
/* Read Control Register */
- if (!dm644x_eth_phy_read(phy_addr, DP83848_CTL_REG, &tmp))
+ if (!davinci_eth_phy_read(phy_addr, DP83848_CTL_REG, &tmp))
return(0);
tmp |= DP83848_SPEED_SELECT | DP83848_AUTONEG | DP83848_DUPLEX_MODE;
- dm644x_eth_phy_write(phy_addr, DP83848_CTL_REG, tmp);
+ davinci_eth_phy_write(phy_addr, DP83848_CTL_REG, tmp);
/* Restart Auto_negotiation */
tmp |= DP83848_RESTART_AUTONEG;
- dm644x_eth_phy_write(phy_addr, DP83848_CTL_REG, tmp);
+ davinci_eth_phy_write(phy_addr, DP83848_CTL_REG, tmp);
/*check AutoNegotiate complete */
udelay(10000);
- if (!dm644x_eth_phy_read(phy_addr, DP83848_STAT_REG, &tmp))
+ if (!davinci_eth_phy_read(phy_addr, DP83848_STAT_REG, &tmp))
return(0);
if (!(tmp & DP83848_AUTONEG_COMP))
diff --git a/cpu/arm926ejs/davinci/ether.c b/cpu/arm926ejs/davinci/ether.c
index 5ae035b..f6f81df 100644
--- a/cpu/arm926ejs/davinci/ether.c
+++ b/cpu/arm926ejs/davinci/ether.c
@@ -50,12 +50,12 @@ unsigned int emac_dbg = 0;
#define debug_emac(fmt,args...) if (emac_dbg) printf(fmt,##args)
/* Internal static functions */
-static int dm644x_eth_hw_init (void);
-static int dm644x_eth_open (void);
-static int dm644x_eth_close (void);
-static int dm644x_eth_send_packet (volatile void *packet, int length);
-static int dm644x_eth_rcv_packet (void);
-static void dm644x_eth_mdio_enable(void);
+static int davinci_eth_hw_init (void);
+static int davinci_eth_open (void);
+static int davinci_eth_close (void);
+static int davinci_eth_send_packet (volatile void *packet, int length);
+static int davinci_eth_rcv_packet (void);
+static void davinci_eth_mdio_enable(void);
static int gen_init_phy(int phy_addr);
static int gen_is_phy_connected(int phy_addr);
@@ -65,48 +65,48 @@ static int gen_auto_negotiate(int phy_addr);
/* Wrappers exported to the U-Boot proper */
int eth_hw_init(void)
{
- return(dm644x_eth_hw_init());
+ return(davinci_eth_hw_init());
}
int eth_init(bd_t * bd)
{
- return(dm644x_eth_open());
+ return(davinci_eth_open());
}
void eth_halt(void)
{
- dm644x_eth_close();
+ davinci_eth_close();
}
int eth_send(volatile void *packet, int length)
{
- return(dm644x_eth_send_packet(packet, length));
+ return(davinci_eth_send_packet(packet, length));
}
int eth_rx(void)
{
- return(dm644x_eth_rcv_packet());
+ return(davinci_eth_rcv_packet());
}
void eth_mdio_enable(void)
{
- dm644x_eth_mdio_enable();
+ davinci_eth_mdio_enable();
}
/* End of wrappers */
-static u_int8_t dm644x_eth_mac_addr[] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
+static u_int8_t davinci_eth_mac_addr[] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
/*
* This function must be called before emac_open() if you want to override
* the default mac address.
*/
-void dm644x_eth_set_mac_addr(const u_int8_t *addr)
+void davinci_eth_set_mac_addr(const u_int8_t *addr)
{
int i;
- for (i = 0; i < sizeof (dm644x_eth_mac_addr); i++) {
- dm644x_eth_mac_addr[i] = addr[i];
+ for (i = 0; i < sizeof (davinci_eth_mac_addr); i++) {
+ davinci_eth_mac_addr[i] = addr[i];
}
}
@@ -130,7 +130,7 @@ static volatile u_int8_t active_phy_addr = 0xff;
phy_t phy;
-static void dm644x_eth_mdio_enable(void)
+static void davinci_eth_mdio_enable(void)
{
u_int32_t clkdiv;
@@ -149,7 +149,7 @@ static void dm644x_eth_mdio_enable(void)
* If no active PHY (or more than one PHY) found returns 0.
* Sets active_phy_addr variable.
*/
-static int dm644x_eth_phy_detect(void)
+static int davinci_eth_phy_detect(void)
{
u_int32_t phy_act_state;
int i;
@@ -159,7 +159,7 @@ static int dm644x_eth_phy_detect(void)
if ((phy_act_state = adap_mdio->ALIVE) == 0)
return(0); /* No active PHYs */
- debug_emac("dm644x_eth_phy_detect(), ALIVE = 0x%08x\n", phy_act_state);
+ debug_emac("davinci_eth_phy_detect(), ALIVE = 0x%08x\n", phy_act_state);
for (i = 0; i < 32; i++) {
if (phy_act_state & (1 << i)) {
@@ -177,7 +177,7 @@ static int dm644x_eth_phy_detect(void)
/* Read a PHY register via MDIO inteface. Returns 1 on success, 0 otherwise */
-int dm644x_eth_phy_read(u_int8_t phy_addr, u_int8_t reg_num, u_int16_t *data)
+int davinci_eth_phy_read(u_int8_t phy_addr, u_int8_t reg_num, u_int16_t *data)
{
int tmp;
@@ -201,7 +201,7 @@ int dm644x_eth_phy_read(u_int8_t phy_addr, u_int8_t reg_num, u_int16_t *data)
}
/* Write to a PHY register via MDIO inteface. Blocks until operation is complete. */
-int dm644x_eth_phy_write(u_int8_t phy_addr, u_int8_t reg_num, u_int16_t data)
+int davinci_eth_phy_write(u_int8_t phy_addr, u_int8_t reg_num, u_int16_t data)
{
while (adap_mdio->USERACCESS0 & MDIO_USERACCESS0_GO) {;}
@@ -235,14 +235,14 @@ static int gen_is_phy_connected(int phy_addr)
{
u_int16_t dummy;
- return(dm644x_eth_phy_read(phy_addr, PHY_PHYIDR1, &dummy));
+ return(davinci_eth_phy_read(phy_addr, PHY_PHYIDR1, &dummy));
}
static int gen_get_link_speed(int phy_addr)
{
u_int16_t tmp;
- if (dm644x_eth_phy_read(phy_addr, MII_STATUS_REG, &tmp) && (tmp & 0x04))
+ if (davinci_eth_phy_read(phy_addr, MII_STATUS_REG, &tmp) && (tmp & 0x04))
return(1);
return(0);
@@ -252,16 +252,16 @@ static int gen_auto_negotiate(int phy_addr)
{
u_int16_t tmp;
- if (!dm644x_eth_phy_read(phy_addr, PHY_BMCR, &tmp))
+ if (!davinci_eth_phy_read(phy_addr, PHY_BMCR, &tmp))
return(0);
/* Restart Auto_negotiation */
tmp |= PHY_BMCR_AUTON;
- dm644x_eth_phy_write(phy_addr, PHY_BMCR, tmp);
+ davinci_eth_phy_write(phy_addr, PHY_BMCR, tmp);
/*check AutoNegotiate complete */
udelay (10000);
- if (!dm644x_eth_phy_read(phy_addr, PHY_BMSR, &tmp))
+ if (!davinci_eth_phy_read(phy_addr, PHY_BMSR, &tmp))
return(0);
if (!(tmp & PHY_BMSR_AUTN_COMP))
@@ -273,19 +273,19 @@ static int gen_auto_negotiate(int phy_addr)
#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
-static int dm644x_mii_phy_read(char *devname, unsigned char addr, unsigned char reg, unsigned short *value)
+static int davinci_mii_phy_read(char *devname, unsigned char addr, unsigned char reg, unsigned short *value)
{
- return(dm644x_eth_phy_read(addr, reg, value) ? 0 : 1);
+ return(davinci_eth_phy_read(addr, reg, value) ? 0 : 1);
}
-static int dm644x_mii_phy_write(char *devname, unsigned char addr, unsigned char reg, unsigned short value)
+static int davinci_mii_phy_write(char *devname, unsigned char addr, unsigned char reg, unsigned short value)
{
- return(dm644x_eth_phy_write(addr, reg, value) ? 0 : 1);
+ return(davinci_eth_phy_write(addr, reg, value) ? 0 : 1);
}
-int dm644x_eth_miiphy_initialize(bd_t *bis)
+int davinci_eth_miiphy_initialize(bd_t *bis)
{
- miiphy_register(phy.name, dm644x_mii_phy_read, dm644x_mii_phy_write);
+ miiphy_register(phy.name, davinci_mii_phy_read, davinci_mii_phy_write);
return(1);
}
@@ -296,13 +296,13 @@ int dm644x_eth_miiphy_initialize(bd_t *bis)
* EMAC modules power or pin multiplexors, that is done by board_init()
* much earlier in bootup process. Returns 1 on success, 0 otherwise.
*/
-static int dm644x_eth_hw_init(void)
+static int davinci_eth_hw_init(void)
{
u_int32_t phy_id;
u_int16_t tmp;
int i;
- dm644x_eth_mdio_enable();
+ davinci_eth_mdio_enable();
for (i = 0; i < 256; i++) {
if (adap_mdio->ALIVE)
@@ -316,18 +316,18 @@ static int dm644x_eth_hw_init(void)
}
/* Find if a PHY is connected and get it's address */
- if (!dm644x_eth_phy_detect())
+ if (!davinci_eth_phy_detect())
return(0);
/* Get PHY ID and initialize phy_ops for a detected PHY */
- if (!dm644x_eth_phy_read(active_phy_addr, PHY_PHYIDR1, &tmp)) {
+ if (!davinci_eth_phy_read(active_phy_addr, PHY_PHYIDR1, &tmp)) {
active_phy_addr = 0xff;
return(0);
}
phy_id = (tmp << 16) & 0xffff0000;
- if (!dm644x_eth_phy_read(active_phy_addr, PHY_PHYIDR2, &tmp)) {
+ if (!davinci_eth_phy_read(active_phy_addr, PHY_PHYIDR2, &tmp)) {
active_phy_addr = 0xff;
return(0);
}
@@ -364,7 +364,7 @@ static int dm644x_eth_hw_init(void)
/* Eth device open */
-static int dm644x_eth_open(void)
+static int davinci_eth_open(void)
{
dv_reg_p addr;
u_int32_t clkdiv, cnt;
@@ -389,26 +389,26 @@ static int dm644x_eth_open(void)
/* Using channel 0 only - other channels are disabled */
adap_emac->MACINDEX = 0;
adap_emac->MACADDRHI =
- (dm644x_eth_mac_addr[3] << 24) |
- (dm644x_eth_mac_addr[2] << 16) |
- (dm644x_eth_mac_addr[1] << 8) |
- (dm644x_eth_mac_addr[0]);
+ (davinci_eth_mac_addr[3] << 24) |
+ (davinci_eth_mac_addr[2] << 16) |
+ (davinci_eth_mac_addr[1] << 8) |
+ (davinci_eth_mac_addr[0]);
adap_emac->MACADDRLO =
- (dm644x_eth_mac_addr[5] << 8) |
- (dm644x_eth_mac_addr[4]);
+ (davinci_eth_mac_addr[5] << 8) |
+ (davinci_eth_mac_addr[4]);
adap_emac->MACHASH1 = 0;
adap_emac->MACHASH2 = 0;
/* Set source MAC address - REQUIRED */
adap_emac->MACSRCADDRHI =
- (dm644x_eth_mac_addr[3] << 24) |
- (dm644x_eth_mac_addr[2] << 16) |
- (dm644x_eth_mac_addr[1] << 8) |
- (dm644x_eth_mac_addr[0]);
+ (davinci_eth_mac_addr[3] << 24) |
+ (davinci_eth_mac_addr[2] << 16) |
+ (davinci_eth_mac_addr[1] << 8) |
+ (davinci_eth_mac_addr[0]);
adap_emac->MACSRCADDRLO =
- (dm644x_eth_mac_addr[4] << 8) |
- (dm644x_eth_mac_addr[5]);
+ (davinci_eth_mac_addr[4] << 8) |
+ (davinci_eth_mac_addr[5]);
/* Set DMA 8 TX / 8 RX Head pointers to 0 */
addr = &adap_emac->TX0HDP;
@@ -473,7 +473,7 @@ static int dm644x_eth_open(void)
}
/* EMAC Channel Teardown */
-static void dm644x_eth_ch_teardown(int ch)
+static void davinci_eth_ch_teardown(int ch)
{
dv_reg dly = 0xff;
dv_reg cnt;
@@ -516,12 +516,12 @@ static void dm644x_eth_ch_teardown(int ch)
}
/* Eth device close */
-static int dm644x_eth_close(void)
+static int davinci_eth_close(void)
{
debug_emac("+ emac_close\n");
- dm644x_eth_ch_teardown(EMAC_CH_TX); /* TX Channel teardown */
- dm644x_eth_ch_teardown(EMAC_CH_RX); /* RX Channel teardown */
+ davinci_eth_ch_teardown(EMAC_CH_TX); /* TX Channel teardown */
+ davinci_eth_ch_teardown(EMAC_CH_RX); /* RX Channel teardown */
/* Reset EMAC module and disable interrupts in wrapper */
adap_emac->SOFTRESET = 1;
@@ -537,7 +537,7 @@ static int tx_send_loop = 0;
* This function sends a single packet on the network and returns
* positive number (number of bytes transmitted) or negative for error
*/
-static int dm644x_eth_send_packet (volatile void *packet, int length)
+static int davinci_eth_send_packet (volatile void *packet, int length)
{
int ret_status = -1;
@@ -568,7 +568,7 @@ static int dm644x_eth_send_packet (volatile void *packet, int length)
/* Wait for packet to complete or link down */
while (1) {
if (!phy.get_link_speed (active_phy_addr)) {
- dm644x_eth_ch_teardown (EMAC_CH_TX);
+ davinci_eth_ch_teardown (EMAC_CH_TX);
return (ret_status);
}
if (adap_emac->TXINTSTATRAW & 0x01) {
@@ -584,7 +584,7 @@ static int dm644x_eth_send_packet (volatile void *packet, int length)
/*
* This function handles receipt of a packet from the network
*/
-static int dm644x_eth_rcv_packet (void)
+static int davinci_eth_rcv_packet (void)
{
volatile emac_desc *rx_curr_desc;
volatile emac_desc *curr_desc;
diff --git a/cpu/arm926ejs/davinci/lxt972.c b/cpu/arm926ejs/davinci/lxt972.c
index 8130b48..ce3e41c 100644
--- a/cpu/arm926ejs/davinci/lxt972.c
+++ b/cpu/arm926ejs/davinci/lxt972.c
@@ -39,9 +39,9 @@ int lxt972_is_phy_connected(int phy_addr)
{
u_int16_t id1, id2;
- if (!dm644x_eth_phy_read(phy_addr, PHY_PHYIDR1, &id1))
+ if (!davinci_eth_phy_read(phy_addr, PHY_PHYIDR1, &id1))
return(0);
- if (!dm644x_eth_phy_read(phy_addr, PHY_PHYIDR2, &id2))
+ if (!davinci_eth_phy_read(phy_addr, PHY_PHYIDR2, &id2))
return(0);
if ((id1 == (0x0013)) && ((id2 & 0xfff0) == 0x78e0))
@@ -55,20 +55,20 @@ int lxt972_get_link_speed(int phy_addr)
u_int16_t stat1, tmp;
volatile emac_regs *emac = (emac_regs *)EMAC_BASE_ADDR;
- if (!dm644x_eth_phy_read(phy_addr, PHY_LXT971_STAT2, &stat1))
+ if (!davinci_eth_phy_read(phy_addr, PHY_LXT971_STAT2, &stat1))
return(0);
if (!(stat1 & PHY_LXT971_STAT2_LINK)) /* link up? */
return(0);
- if (!dm644x_eth_phy_read(phy_addr, PHY_LXT971_DIG_CFG, &tmp))
+ if (!davinci_eth_phy_read(phy_addr, PHY_LXT971_DIG_CFG, &tmp))
return(0);
tmp |= PHY_LXT971_DIG_CFG_MII_DRIVE;
- dm644x_eth_phy_write(phy_addr, PHY_LXT971_DIG_CFG, tmp);
+ davinci_eth_phy_write(phy_addr, PHY_LXT971_DIG_CFG, tmp);
/* Read back */
- if (!dm644x_eth_phy_read(phy_addr, PHY_LXT971_DIG_CFG, &tmp))
+ if (!davinci_eth_phy_read(phy_addr, PHY_LXT971_DIG_CFG, &tmp))
return(0);
/* Speed doesn't matter, there is no setting for it in EMAC... */
@@ -95,7 +95,7 @@ int lxt972_init_phy(int phy_addr)
}
/* Disable PHY Interrupts */
- dm644x_eth_phy_write(phy_addr, PHY_LXT971_INT_ENABLE, 0);
+ davinci_eth_phy_write(phy_addr, PHY_LXT971_INT_ENABLE, 0);
return(ret);
}
@@ -105,16 +105,16 @@ int lxt972_auto_negotiate(int phy_addr)
{
u_int16_t tmp;
- if (!dm644x_eth_phy_read(phy_addr, PHY_BMCR, &tmp))
+ if (!davinci_eth_phy_read(phy_addr, PHY_BMCR, &tmp))
return(0);
/* Restart Auto_negotiation */
tmp |= PHY_BMCR_RST_NEG;
- dm644x_eth_phy_write(phy_addr, PHY_BMCR, tmp);
+ davinci_eth_phy_write(phy_addr, PHY_BMCR, tmp);
/*check AutoNegotiate complete */
udelay (10000);
- if (!dm644x_eth_phy_read(phy_addr, PHY_BMSR, &tmp))
+ if (!davinci_eth_phy_read(phy_addr, PHY_BMSR, &tmp))
return(0);
if (!(tmp & PHY_BMSR_AUTN_COMP))
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index 1923310..b0abe6e 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -37,6 +37,7 @@ endif
COBJS-$(CONFIG_NAND_FSL_ELBC) += fsl_elbc_nand.o
COBJS-$(CONFIG_NAND_FSL_UPM) += fsl_upm.o
+COBJS-$(CONFIG_NAND_S3C64XX) += s3c64xx.o
endif
COBJS := $(COBJS-y)
diff --git a/drivers/mtd/nand/s3c64xx.c b/drivers/mtd/nand/s3c64xx.c
new file mode 100644
index 0000000..159fe76
--- /dev/null
+++ b/drivers/mtd/nand/s3c64xx.c
@@ -0,0 +1,319 @@
+/*
+ * (C) Copyright 2006 DENX Software Engineering
+ *
+ * Implementation for U-Boot 1.1.6 by Samsung
+ *
+ * (C) Copyright 2008
+ * Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+#include <nand.h>
+#include <s3c6400.h>
+
+#include <asm/io.h>
+#include <asm/errno.h>
+
+#define MAX_CHIPS 2
+static int nand_cs[MAX_CHIPS] = {0, 1};
+
+#ifdef CONFIG_NAND_SPL
+#define printf(arg...) do {} while (0)
+#endif
+
+/* Nand flash definition values by jsgood */
+#ifdef S3C_NAND_DEBUG
+/*
+ * Function to print out oob buffer for debugging
+ * Written by jsgood
+ */
+static void print_oob(const char *header, struct mtd_info *mtd)
+{
+ int i;
+ struct nand_chip *chip = mtd->priv;
+
+ printf("%s:\t", header);
+
+ for (i = 0; i < 64; i++)
+ printf("%02x ", chip->oob_poi[i]);
+
+ printf("\n");
+}
+#endif /* S3C_NAND_DEBUG */
+
+#ifdef CONFIG_NAND_SPL
+static u_char nand_read_byte(struct mtd_info *mtd)
+{
+ struct nand_chip *this = mtd->priv;
+ return readb(this->IO_ADDR_R);
+}
+
+static void nand_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
+{
+ int i;
+ struct nand_chip *this = mtd->priv;
+
+ for (i = 0; i < len; i++)
+ writeb(buf[i], this->IO_ADDR_W);
+}
+
+static void nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
+{
+ int i;
+ struct nand_chip *this = mtd->priv;
+
+ for (i = 0; i < len; i++)
+ buf[i] = readb(this->IO_ADDR_R);
+}
+#endif
+
+static void s3c_nand_select_chip(struct mtd_info *mtd, int chip)
+{
+ int ctrl = readl(NFCONT);
+
+ switch (chip) {
+ case -1:
+ ctrl |= 6;
+ break;
+ case 0:
+ ctrl &= ~2;
+ break;
+ case 1:
+ ctrl &= ~4;
+ break;
+ default:
+ return;
+ }
+
+ writel(ctrl, NFCONT);
+}
+
+/*
+ * Hardware specific access to control-lines function
+ * Written by jsgood
+ */
+static void s3c_nand_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+{
+ struct nand_chip *this = mtd->priv;
+
+ if (ctrl & NAND_CTRL_CHANGE) {
+ if (ctrl & NAND_CLE)
+ this->IO_ADDR_W = (void __iomem *)NFCMMD;
+ else if (ctrl & NAND_ALE)
+ this->IO_ADDR_W = (void __iomem *)NFADDR;
+ else
+ this->IO_ADDR_W = (void __iomem *)NFDATA;
+ if (ctrl & NAND_NCE)
+ s3c_nand_select_chip(mtd, *(int *)this->priv);
+ else
+ s3c_nand_select_chip(mtd, -1);
+ }
+
+ if (cmd != NAND_CMD_NONE)
+ writeb(cmd, this->IO_ADDR_W);
+}
+
+/*
+ * Function for checking device ready pin
+ * Written by jsgood
+ */
+static int s3c_nand_device_ready(struct mtd_info *mtdinfo)
+{
+ return !!(readl(NFSTAT) & NFSTAT_RnB);
+}
+
+#ifdef CFG_S3C_NAND_HWECC
+/*
+ * This function is called before encoding ecc codes to ready ecc engine.
+ * Written by jsgood
+ */
+static void s3c_nand_enable_hwecc(struct mtd_info *mtd, int mode)
+{
+ u_long nfcont, nfconf;
+
+ /*
+ * The original driver used 4-bit ECC for "new" MLC chips, i.e., for
+ * those with non-zero ID[3][3:2], which anyway only holds for ST
+ * (Numonyx) chips
+ */
+ nfconf = readl(NFCONF) & ~NFCONF_ECC_4BIT;
+
+ writel(nfconf, NFCONF);
+
+ /* Initialize & unlock */
+ nfcont = readl(NFCONT);
+ nfcont |= NFCONT_INITECC;
+ nfcont &= ~NFCONT_MECCLOCK;
+
+ if (mode == NAND_ECC_WRITE)
+ nfcont |= NFCONT_ECC_ENC;
+ else if (mode == NAND_ECC_READ)
+ nfcont &= ~NFCONT_ECC_ENC;
+
+ writel(nfcont, NFCONT);
+}
+
+/*
+ * This function is called immediately after encoding ecc codes.
+ * This function returns encoded ecc codes.
+ * Written by jsgood
+ */
+static int s3c_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat,
+ u_char *ecc_code)
+{
+ u_long nfcont, nfmecc0;
+
+ /* Lock */
+ nfcont = readl(NFCONT);
+ nfcont |= NFCONT_MECCLOCK;
+ writel(nfcont, NFCONT);
+
+ nfmecc0 = readl(NFMECC0);
+
+ ecc_code[0] = nfmecc0 & 0xff;
+ ecc_code[1] = (nfmecc0 >> 8) & 0xff;
+ ecc_code[2] = (nfmecc0 >> 16) & 0xff;
+ ecc_code[3] = (nfmecc0 >> 24) & 0xff;
+
+ return 0;
+}
+
+/*
+ * This function determines whether read data is good or not.
+ * If SLC, must write ecc codes to controller before reading status bit.
+ * If MLC, status bit is already set, so only reading is needed.
+ * If status bit is good, return 0.
+ * If correctable errors occured, do that.
+ * If uncorrectable errors occured, return -1.
+ * Written by jsgood
+ */
+static int s3c_nand_correct_data(struct mtd_info *mtd, u_char *dat,
+ u_char *read_ecc, u_char *calc_ecc)
+{
+ int ret = -1;
+ u_long nfestat0, nfmeccdata0, nfmeccdata1, err_byte_addr;
+ u_char err_type, repaired;
+
+ /* SLC: Write ecc to compare */
+ nfmeccdata0 = (calc_ecc[1] << 16) | calc_ecc[0];
+ nfmeccdata1 = (calc_ecc[3] << 16) | calc_ecc[2];
+ writel(nfmeccdata0, NFMECCDATA0);
+ writel(nfmeccdata1, NFMECCDATA1);
+
+ /* Read ecc status */
+ nfestat0 = readl(NFESTAT0);
+ err_type = nfestat0 & 0x3;
+
+ switch (err_type) {
+ case 0: /* No error */
+ ret = 0;
+ break;
+
+ case 1:
+ /*
+ * 1 bit error (Correctable)
+ * (nfestat0 >> 7) & 0x7ff :error byte number
+ * (nfestat0 >> 4) & 0x7 :error bit number
+ */
+ err_byte_addr = (nfestat0 >> 7) & 0x7ff;
+ repaired = dat[err_byte_addr] ^ (1 << ((nfestat0 >> 4) & 0x7));
+
+ printf("S3C NAND: 1 bit error detected at byte %ld. "
+ "Correcting from 0x%02x to 0x%02x...OK\n",
+ err_byte_addr, dat[err_byte_addr], repaired);
+
+ dat[err_byte_addr] = repaired;
+
+ ret = 1;
+ break;
+
+ case 2: /* Multiple error */
+ case 3: /* ECC area error */
+ printf("S3C NAND: ECC uncorrectable error detected. "
+ "Not correctable.\n");
+ ret = -1;
+ break;
+ }
+
+ return ret;
+}
+#endif /* CFG_S3C_NAND_HWECC */
+
+/*
+ * Board-specific NAND initialization. The following members of the
+ * argument are board-specific (per include/linux/mtd/nand.h):
+ * - IO_ADDR_R?: address to read the 8 I/O lines of the flash device
+ * - IO_ADDR_W?: address to write the 8 I/O lines of the flash device
+ * - hwcontrol: hardwarespecific function for accesing control-lines
+ * - dev_ready: hardwarespecific function for accesing device ready/busy line
+ * - enable_hwecc?: function to enable (reset) hardware ecc generator. Must
+ * only be provided if a hardware ECC is available
+ * - eccmode: mode of ecc, see defines
+ * - chip_delay: chip dependent delay for transfering data from array to
+ * read regs (tR)
+ * - options: various chip options. They can partly be set to inform
+ * nand_scan about special functionality. See the defines for further
+ * explanation
+ * Members with a "?" were not set in the merged testing-NAND branch,
+ * so they are not set here either.
+ */
+int board_nand_init(struct nand_chip *nand)
+{
+ static int chip_n;
+
+ if (chip_n >= MAX_CHIPS)
+ return -ENODEV;
+
+ NFCONT_REG = (NFCONT_REG & ~NFCONT_WP) | NFCONT_ENABLE | 0x6;
+
+ nand->IO_ADDR_R = (void __iomem *)NFDATA;
+ nand->IO_ADDR_W = (void __iomem *)NFDATA;
+ nand->cmd_ctrl = s3c_nand_hwcontrol;
+ nand->dev_ready = s3c_nand_device_ready;
+ nand->select_chip = s3c_nand_select_chip;
+ nand->options = 0;
+#ifdef CONFIG_NAND_SPL
+ nand->read_byte = nand_read_byte;
+ nand->write_buf = nand_write_buf;
+ nand->read_buf = nand_read_buf;
+#endif
+
+#ifdef CFG_S3C_NAND_HWECC
+ nand->ecc.hwctl = s3c_nand_enable_hwecc;
+ nand->ecc.calculate = s3c_nand_calculate_ecc;
+ nand->ecc.correct = s3c_nand_correct_data;
+
+ /*
+ * If you get more than 1 NAND-chip with different page-sizes on the
+ * board one day, it will get more complicated...
+ */
+ nand->ecc.mode = NAND_ECC_HW;
+ nand->ecc.size = CFG_NAND_ECCSIZE;
+ nand->ecc.bytes = CFG_NAND_ECCBYTES;
+#else
+ nand->ecc.mode = NAND_ECC_SOFT;
+#endif /* ! CFG_S3C_NAND_HWECC */
+
+ nand->priv = nand_cs + chip_n++;
+
+ return 0;
+}
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index 2384735..f30014d 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -30,6 +30,7 @@ COBJS-$(CONFIG_MCFUART) += mcfuart.o
COBJS-$(CONFIG_NS9750_UART) += ns9750_serial.o
COBJS-y += ns16550.o
COBJS-$(CONFIG_DRIVER_S3C4510_UART) += s3c4510b_uart.o
+COBJS-$(CONFIG_S3C64XX) += s3c64xx.o
COBJS-y += serial.o
COBJS-$(CONFIG_MAX3100_SERIAL) += serial_max3100.o
COBJS-y += serial_pl010.o
diff --git a/drivers/serial/s3c64xx.c b/drivers/serial/s3c64xx.c
new file mode 100644
index 0000000..9d8fcb9
--- /dev/null
+++ b/drivers/serial/s3c64xx.c
@@ -0,0 +1,172 @@
+/*
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+ *
+ * (C) Copyright 2008
+ * Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+
+#include <s3c6400.h>
+
+#ifdef CONFIG_SERIAL1
+#define UART_NR S3C64XX_UART0
+
+#elif defined(CONFIG_SERIAL2)
+#define UART_NR S3C64XX_UART1
+
+#elif defined(CONFIG_SERIAL3)
+#define UART_NR S3C64XX_UART2
+
+#else
+#error "Bad: you didn't configure serial ..."
+#endif
+
+#define barrier() asm volatile("" ::: "memory")
+
+/*
+ * The coefficient, used to calculate the baudrate on S3C6400 UARTs is
+ * calculated as
+ * C = UBRDIV * 16 + number_of_set_bits_in_UDIVSLOT
+ * however, section 31.6.11 of the datasheet doesn't recomment using 1 for 1,
+ * 3 for 2, ... (2^n - 1) for n, instead, they suggest using these constants:
+ */
+static const int udivslot[] = {
+ 0,
+ 0x0080,
+ 0x0808,
+ 0x0888,
+ 0x2222,
+ 0x4924,
+ 0x4a52,
+ 0x54aa,
+ 0x5555,
+ 0xd555,
+ 0xd5d5,
+ 0xddd5,
+ 0xdddd,
+ 0xdfdd,
+ 0xdfdf,
+ 0xffdf,
+};
+
+void serial_setbrg(void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+ s3c64xx_uart *const uart = s3c64xx_get_base_uart(UART_NR);
+ u32 pclk = get_PCLK();
+ u32 baudrate = gd->baudrate;
+ int i;
+
+ i = (pclk / baudrate) % 16;
+
+ uart->UBRDIV = pclk / baudrate / 16 - 1;
+ uart->UDIVSLOT = udivslot[i];
+
+ for (i = 0; i < 100; i++)
+ barrier();
+}
+
+/*
+ * Initialise the serial port with the given baudrate. The settings
+ * are always 8 data bits, no parity, 1 stop bit, no start bits.
+ */
+int serial_init(void)
+{
+ s3c64xx_uart *const uart = s3c64xx_get_base_uart(UART_NR);
+
+ /* reset and enable FIFOs, set triggers to the maximum */
+ uart->UFCON = 0xff;
+ uart->UMCON = 0;
+ /* 8N1 */
+ uart->ULCON = 3;
+ /* No interrupts, no DMA, pure polling */
+ uart->UCON = 5;
+
+ serial_setbrg();
+
+ return 0;
+}
+
+/*
+ * Read a single byte from the serial port. Returns 1 on success, 0
+ * otherwise. When the function is succesfull, the character read is
+ * written into its argument c.
+ */
+int serial_getc(void)
+{
+ s3c64xx_uart *const uart = s3c64xx_get_base_uart(UART_NR);
+
+ /* wait for character to arrive */
+ while (!(uart->UTRSTAT & 0x1));
+
+ return uart->URXH & 0xff;
+}
+
+#ifdef CONFIG_MODEM_SUPPORT
+static int be_quiet;
+void disable_putc(void)
+{
+ be_quiet = 1;
+}
+
+void enable_putc(void)
+{
+ be_quiet = 0;
+}
+#endif
+
+
+/*
+ * Output a single byte to the serial port.
+ */
+void serial_putc(const char c)
+{
+ s3c64xx_uart *const uart = s3c64xx_get_base_uart(UART_NR);
+
+#ifdef CONFIG_MODEM_SUPPORT
+ if (be_quiet)
+ return;
+#endif
+
+ /* wait for room in the tx FIFO */
+ while (!(uart->UTRSTAT & 0x2));
+
+ uart->UTXH = c;
+
+ /* If \n, also do \r */
+ if (c == '\n')
+ serial_putc('\r');
+}
+
+/*
+ * Test whether a character is in the RX buffer
+ */
+int serial_tstc(void)
+{
+ s3c64xx_uart *const uart = s3c64xx_get_base_uart(UART_NR);
+
+ return uart->UTRSTAT & 0x1;
+}
+
+void serial_puts(const char *s)
+{
+ while (*s)
+ serial_putc(*s++);
+}
diff --git a/drivers/usb/usb_ohci.c b/drivers/usb/usb_ohci.c
index fd60edb..0bfa4d7 100644
--- a/drivers/usb/usb_ohci.c
+++ b/drivers/usb/usb_ohci.c
@@ -69,6 +69,7 @@
#if defined(CONFIG_ARM920T) || \
defined(CONFIG_S3C2400) || \
defined(CONFIG_S3C2410) || \
+ defined(CONFIG_S3C6400) || \
defined(CONFIG_440EP) || \
defined(CONFIG_PCI_OHCI) || \
defined(CONFIG_MPC5200) || \
diff --git a/include/asm-arm/arch-davinci/emac_defs.h b/include/asm-arm/arch-davinci/emac_defs.h
index 0e10116..c11161f 100644
--- a/include/asm-arm/arch-davinci/emac_defs.h
+++ b/include/asm-arm/arch-davinci/emac_defs.h
@@ -284,8 +284,8 @@ typedef struct {
dv_reg USERPHYSEL1;
} mdio_regs;
-int dm644x_eth_phy_read(u_int8_t phy_addr, u_int8_t reg_num, u_int16_t *data);
-int dm644x_eth_phy_write(u_int8_t phy_addr, u_int8_t reg_num, u_int16_t data);
+int davinci_eth_phy_read(u_int8_t phy_addr, u_int8_t reg_num, u_int16_t *data);
+int davinci_eth_phy_write(u_int8_t phy_addr, u_int8_t reg_num, u_int16_t data);
typedef struct
{
diff --git a/include/asm-arm/arch-s3c64xx/hardware.h b/include/asm-arm/arch-s3c64xx/hardware.h
new file mode 100644
index 0000000..84d24c9
--- /dev/null
+++ b/include/asm-arm/arch-s3c64xx/hardware.h
@@ -0,0 +1,63 @@
+/*
+ * Originates from Samsung's u-boot 1.1.6 port to S3C6400 / SMDK6400
+ *
+ * (C) Copyright 2008
+ * Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _ARCH_HARDWARE_H_
+#define _ARCH_HARDWARE_H_
+
+#include <asm/sizes.h>
+
+#ifndef __ASSEMBLY__
+#define UData(Data) ((unsigned long) (Data))
+
+#define __REG(x) (*(vu_long *)(x))
+#define __REGl(x) (*(vu_long *)(x))
+#define __REGw(x) (*(vu_short *)(x))
+#define __REGb(x) (*(vu_char *)(x))
+#define __REG2(x, y) (*(vu_long *)((x) + (y)))
+#else
+#define UData(Data) (Data)
+
+#define __REG(x) (x)
+#define __REGl(x) (x)
+#define __REGw(x) (x)
+#define __REGb(x) (x)
+#define __REG2(x, y) ((x) + (y))
+#endif
+
+#define Fld(Size, Shft) (((Size) << 16) + (Shft))
+
+#define FSize(Field) ((Field) >> 16)
+#define FShft(Field) ((Field) & 0x0000FFFF)
+#define FMsk(Field) (((UData (1) << FSize (Field)) - 1) << FShft (Field))
+#define FAlnMsk(Field) ((UData (1) << FSize (Field)) - 1)
+#define F1stBit(Field) (UData (1) << FShft (Field))
+
+#define FClrBit(Data, Bit) (Data = (Data & ~(Bit)))
+#define FClrFld(Data, Field) (Data = (Data & ~FMsk(Field)))
+
+#define FInsrt(Value, Field) \
+ (UData (Value) << FShft (Field))
+
+#define FExtr(Data, Field) \
+ ((UData (Data) >> FShft (Field)) & FAlnMsk (Field))
+
+#endif /* _ARCH_HARDWARE_H_ */
diff --git a/include/common.h b/include/common.h
index de3d595..a394988 100644
--- a/include/common.h
+++ b/include/common.h
@@ -490,7 +490,8 @@ int prt_mpc8220_clks (void);
ulong get_OPB_freq (void);
ulong get_PCI_freq (void);
#endif
-#if defined(CONFIG_S3C2400) || defined(CONFIG_S3C2410) || defined(CONFIG_LH7A40X)
+#if defined(CONFIG_S3C2400) || defined(CONFIG_S3C2410) || \
+ defined(CONFIG_LH7A40X) || defined(CONFIG_S3C6400)
void s3c2410_irq(void);
#define ARM920_IRQ_CALLBACK s3c2410_irq
ulong get_FCLK (void);
diff --git a/include/configs/smdk6400.h b/include/configs/smdk6400.h
new file mode 100644
index 0000000..f0c146e
--- /dev/null
+++ b/include/configs/smdk6400.h
@@ -0,0 +1,307 @@
+/*
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ * Gary Jennejohn <gj@denx.de>
+ * David Mueller <d.mueller@elsoft.ch>
+ *
+ * (C) Copyright 2008
+ * Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de>
+ *
+ * Configuation settings for the SAMSUNG SMDK6400(mDirac-III) board.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+#define CONFIG_S3C6400 1 /* in a SAMSUNG S3C6400 SoC */
+#define CONFIG_S3C64XX 1 /* in a SAMSUNG S3C64XX Family */
+#define CONFIG_SMDK6400 1 /* on a SAMSUNG SMDK6400 Board */
+
+#define CFG_SDRAM_BASE 0x50000000
+
+/* input clock of PLL: SMDK6400 has 12MHz input clock */
+#define CONFIG_SYS_CLK_FREQ 12000000
+
+#if !defined(CONFIG_NAND_SPL) && (TEXT_BASE >= 0xc0000000)
+#define CONFIG_ENABLE_MMU
+#endif
+
+#define CONFIG_MEMORY_UPPER_CODE
+
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_INITRD_TAG
+
+/*
+ * Architecture magic and machine type
+ */
+#define MACH_TYPE 1270
+
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+
+#undef CONFIG_SKIP_RELOCATE_UBOOT
+
+/*
+ * Size of malloc() pool
+ */
+#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 1024 * 1024)
+#define CFG_GBL_DATA_SIZE 128 /* size in bytes for initial data */
+
+/*
+ * Hardware drivers
+ */
+#define CONFIG_DRIVER_CS8900 1 /* we have a CS8900 on-board */
+#define CS8900_BASE 0x18800300
+#define CS8900_BUS16 1 /* follow the Linux driver */
+
+/*
+ * select serial console configuration
+ */
+#define CONFIG_SERIAL1 1 /* we use SERIAL 1 on SMDK6400 */
+
+#define CFG_HUSH_PARSER /* use "hush" command parser */
+#ifdef CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2 "> "
+#endif
+
+#define CONFIG_CMDLINE_EDITING
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+
+#define CONFIG_BAUDRATE 115200
+
+/***********************************************************
+ * Command definition
+ ***********************************************************/
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_LOADS
+#define CONFIG_CMD_LOADB
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_NAND
+#if defined(CONFIG_BOOT_ONENAND)
+#define CONFIG_CMD_ONENAND
+#endif
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_EXT2
+
+#define CONFIG_BOOTDELAY 3
+
+#define CONFIG_ZERO_BOOTDELAY_CHECK
+
+#if (CONFIG_COMMANDS & CONFIG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */
+#endif
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "SMDK6400 # " /* Monitor Command Prompt */
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#define CFG_PBSIZE 384 /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START CFG_SDRAM_BASE /* memtest works on */
+#define CFG_MEMTEST_END (CFG_SDRAM_BASE + 0x7e00000) /* 126MB in DRAM */
+
+#define CFG_LOAD_ADDR CFG_SDRAM_BASE /* default load address */
+
+#define CFG_HZ 1000
+
+/* valid baudrates */
+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+
+/*-----------------------------------------------------------------------
+ * Stack sizes
+ *
+ * The stack sizes are set up in start.S using the settings below
+ */
+#define CONFIG_STACKSIZE 0x40000 /* regular stack 256KB */
+
+/**********************************
+ Support Clock Settings
+ **********************************
+ Setting SYNC ASYNC
+ ----------------------------------
+ 667_133_66 X O
+ 533_133_66 O O
+ 400_133_66 X O
+ 400_100_50 O O
+ **********************************/
+
+/*#define CONFIG_CLK_667_133_66*/
+#define CONFIG_CLK_533_133_66
+/*
+#define CONFIG_CLK_400_100_50
+#define CONFIG_CLK_400_133_66
+#define CONFIG_SYNC_MODE
+*/
+
+/* SMDK6400 has 2 banks of DRAM, but we use only one in U-Boot */
+#define CONFIG_NR_DRAM_BANKS 1
+#define PHYS_SDRAM_1 CFG_SDRAM_BASE /* SDRAM Bank #1 */
+#define PHYS_SDRAM_1_SIZE 0x08000000 /* 128 MB in Bank #1 */
+
+#define CFG_FLASH_BASE 0x10000000
+#define CFG_MONITOR_BASE 0x00000000
+
+/*-----------------------------------------------------------------------
+ * FLASH and environment organization
+ */
+#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
+/* AM29LV160B has 35 sectors, AM29LV800B - 19 */
+#define CFG_MAX_FLASH_SECT 40
+
+#define CONFIG_AMD_LV800
+#define CFG_FLASH_CFI 1 /* Use CFI parameters (needed?) */
+/* Use drivers/cfi_flash.c, even though the flash is not CFI-compliant */
+#define CONFIG_FLASH_CFI_DRIVER 1
+#define CFG_FLASH_CFI_WIDTH FLASH_CFI_16BIT
+#define CONFIG_FLASH_CFI_LEGACY
+#define CFG_FLASH_LEGACY_512Kx16
+
+/* timeout values are in ticks */
+#define CFG_FLASH_ERASE_TOUT (5 * CFG_HZ) /* Timeout for Flash Erase */
+#define CFG_FLASH_WRITE_TOUT (5 * CFG_HZ) /* Timeout for Flash Write */
+
+#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
+
+/*
+ * SMDK6400 board specific data
+ */
+
+#define CONFIG_IDENT_STRING " for SMDK6400"
+
+/* base address for uboot */
+#define CFG_PHY_UBOOT_BASE (CFG_SDRAM_BASE + 0x07e00000)
+/* total memory available to uboot */
+#define CFG_UBOOT_SIZE (1024 * 1024)
+
+#ifdef CONFIG_ENABLE_MMU
+#define CFG_MAPPED_RAM_BASE 0xc0000000
+#define CONFIG_BOOTCOMMAND "nand read 0xc0018000 0x60000 0x1c0000;" \
+ "bootm 0xc0018000"
+#else
+#define CFG_MAPPED_RAM_BASE CFG_SDRAM_BASE
+#define CONFIG_BOOTCOMMAND "nand read 0x50018000 0x60000 0x1c0000;" \
+ "bootm 0x50018000"
+#endif
+
+/* NAND U-Boot load and start address */
+#define CFG_UBOOT_BASE (CFG_MAPPED_RAM_BASE + 0x07e00000)
+
+#define CFG_ENV_OFFSET 0x0040000
+
+/* NAND configuration */
+#define CFG_MAX_NAND_DEVICE 1
+#define CFG_NAND_BASE 0x70200010
+#define NAND_MAX_CHIPS 1
+#define CFG_S3C_NAND_HWECC
+
+#define CFG_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */
+#define CFG_NAND_WP 1
+#define CFG_NAND_YAFFS_WRITE 1 /* support yaffs write */
+#define CFG_NAND_BBT_2NDPAGE 1 /* bad-block markers in 1st and 2nd pages */
+
+#define CFG_NAND_U_BOOT_DST CFG_PHY_UBOOT_BASE /* NUB load-addr */
+#define CFG_NAND_U_BOOT_START CFG_NAND_U_BOOT_DST /* NUB start-addr */
+
+#define CFG_NAND_U_BOOT_OFFS (4 * 1024) /* Offset to RAM U-Boot image */
+#define CFG_NAND_U_BOOT_SIZE (252 * 1024) /* Size of RAM U-Boot image */
+
+/* NAND chip page size */
+#define CFG_NAND_PAGE_SIZE 2048
+/* NAND chip block size */
+#define CFG_NAND_BLOCK_SIZE (128 * 1024)
+/* NAND chip page per block count */
+#define CFG_NAND_PAGE_COUNT 64
+/* Location of the bad-block label */
+#define CFG_NAND_BAD_BLOCK_POS 0
+/* Extra address cycle for > 128MiB */
+#define CFG_NAND_5_ADDR_CYCLE
+
+/* Size of the block protected by one OOB (Spare Area in Samsung terminology) */
+#define CFG_NAND_ECCSIZE CFG_NAND_PAGE_SIZE
+/* Number of ECC bytes per OOB - S3C6400 calculates 4 bytes ECC in 1-bit mode */
+#define CFG_NAND_ECCBYTES 4
+/* Number of ECC-blocks per NAND page */
+#define CFG_NAND_ECCSTEPS (CFG_NAND_PAGE_SIZE / CFG_NAND_ECCSIZE)
+/* Size of a single OOB region */
+#define CFG_NAND_OOBSIZE 64
+/* Number of ECC bytes per page */
+#define CFG_NAND_ECCTOTAL (CFG_NAND_ECCBYTES * CFG_NAND_ECCSTEPS)
+/* ECC byte positions */
+#define CFG_NAND_ECCPOS {40, 41, 42, 43, 44, 45, 46, 47, \
+ 48, 49, 50, 51, 52, 53, 54, 55, \
+ 56, 57, 58, 59, 60, 61, 62, 63}
+
+/* Boot configuration (define only one of next 3) */
+#define CONFIG_BOOT_NAND
+/* None of these are currently implemented. Left from the original Samsung
+ * version for reference
+#define CONFIG_BOOT_NOR
+#define CONFIG_BOOT_MOVINAND
+#define CONFIG_BOOT_ONENAND
+*/
+
+#define CONFIG_NAND
+#define CONFIG_NAND_S3C64XX
+/* Unimplemented or unsupported. See comment above.
+#define CONFIG_ONENAND
+#define CONFIG_MOVINAND
+*/
+
+/* Settings as above boot configuration */
+#define CFG_ENV_IS_IN_NAND
+#define CONFIG_BOOTARGS "console=ttySAC,115200"
+
+#if !defined(CONFIG_ENABLE_MMU)
+#define CONFIG_CMD_USB 1
+#define CONFIG_USB_OHCI_NEW 1
+#define CFG_USB_OHCI_REGS_BASE 0x74300000
+#define CFG_USB_OHCI_SLOT_NAME "s3c6400"
+#define CFG_USB_OHCI_MAX_ROOT_PORTS 3
+#define CFG_USB_OHCI_CPU_INIT 1
+#define LITTLEENDIAN 1 /* used by usb_ohci.c */
+
+#define CONFIG_USB_STORAGE 1
+#endif
+#define CONFIG_DOS_PARTITION 1
+
+#if defined(CONFIG_USB_OHCI_NEW) && defined(CONFIG_ENABLE_MMU)
+# error "usb_ohci.c is currently broken with MMU enabled."
+#endif
+
+#endif /* __CONFIG_H */
diff --git a/include/s3c6400.h b/include/s3c6400.h
new file mode 100644
index 0000000..fd3e99b
--- /dev/null
+++ b/include/s3c6400.h
@@ -0,0 +1,894 @@
+/*
+ * (C) Copyright 2007
+ * Byungjae Lee, Samsung Erectronics, bjlee@samsung.com.
+ * - only support for S3C6400
+ *
+ * (C) Copyright 2008
+ * Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/************************************************
+ * NAME : s3c6400.h
+ *
+ * Based on S3C6400 User's manual Rev 0.0
+ ************************************************/
+
+#ifndef __S3C6400_H__
+#define __S3C6400_H__
+
+#ifndef CONFIG_S3C6400
+#define CONFIG_S3C6400 1
+#endif
+
+#define S3C64XX_UART_CHANNELS 3
+#define S3C64XX_SPI_CHANNELS 2
+
+#include <asm/hardware.h>
+
+#define ELFIN_CLOCK_POWER_BASE 0x7e00f000
+
+/* Clock & Power Controller for mDirac3*/
+#define APLL_LOCK_OFFSET 0x00
+#define MPLL_LOCK_OFFSET 0x04
+#define EPLL_LOCK_OFFSET 0x08
+#define APLL_CON_OFFSET 0x0C
+#define MPLL_CON_OFFSET 0x10
+#define EPLL_CON0_OFFSET 0x14
+#define EPLL_CON1_OFFSET 0x18
+#define CLK_SRC_OFFSET 0x1C
+#define CLK_DIV0_OFFSET 0x20
+#define CLK_DIV1_OFFSET 0x24
+#define CLK_DIV2_OFFSET 0x28
+#define CLK_OUT_OFFSET 0x2C
+#define HCLK_GATE_OFFSET 0x30
+#define PCLK_GATE_OFFSET 0x34
+#define SCLK_GATE_OFFSET 0x38
+#define AHB_CON0_OFFSET 0x100
+#define AHB_CON1_OFFSET 0x104
+#define AHB_CON2_OFFSET 0x108
+#define SELECT_DMA_OFFSET 0x110
+#define SW_RST_OFFSET 0x114
+#define SYS_ID_OFFSET 0x118
+#define MEM_SYS_CFG_OFFSET 0x120
+#define QOS_OVERRIDE0_OFFSET 0x124
+#define QOS_OVERRIDE1_OFFSET 0x128
+#define MEM_CFG_STAT_OFFSET 0x12C
+#define PWR_CFG_OFFSET 0x804
+#define EINT_MASK_OFFSET 0x808
+#define NOR_CFG_OFFSET 0x810
+#define STOP_CFG_OFFSET 0x814
+#define SLEEP_CFG_OFFSET 0x818
+#define OSC_FREQ_OFFSET 0x820
+#define OSC_STABLE_OFFSET 0x824
+#define PWR_STABLE_OFFSET 0x828
+#define FPC_STABLE_OFFSET 0x82C
+#define MTC_STABLE_OFFSET 0x830
+#define OTHERS_OFFSET 0x900
+#define RST_STAT_OFFSET 0x904
+#define WAKEUP_STAT_OFFSET 0x908
+#define BLK_PWR_STAT_OFFSET 0x90C
+#define INF_REG0_OFFSET 0xA00
+#define INF_REG1_OFFSET 0xA04
+#define INF_REG2_OFFSET 0xA08
+#define INF_REG3_OFFSET 0xA0C
+#define INF_REG4_OFFSET 0xA10
+#define INF_REG5_OFFSET 0xA14
+#define INF_REG6_OFFSET 0xA18
+#define INF_REG7_OFFSET 0xA1C
+
+#define OSC_CNT_VAL_OFFSET 0x824
+#define PWR_CNT_VAL_OFFSET 0x828
+#define FPC_CNT_VAL_OFFSET 0x82C
+#define MTC_CNT_VAL_OFFSET 0x830
+
+#define APLL_LOCK_REG __REG(ELFIN_CLOCK_POWER_BASE + APLL_LOCK_OFFSET)
+#define MPLL_LOCK_REG __REG(ELFIN_CLOCK_POWER_BASE + MPLL_LOCK_OFFSET)
+#define EPLL_LOCK_REG __REG(ELFIN_CLOCK_POWER_BASE + EPLL_LOCK_OFFSET)
+#define APLL_CON_REG __REG(ELFIN_CLOCK_POWER_BASE + APLL_CON_OFFSET)
+#define MPLL_CON_REG __REG(ELFIN_CLOCK_POWER_BASE + MPLL_CON_OFFSET)
+#define EPLL_CON0_REG __REG(ELFIN_CLOCK_POWER_BASE + EPLL_CON0_OFFSET)
+#define EPLL_CON1_REG __REG(ELFIN_CLOCK_POWER_BASE + EPLL_CON1_OFFSET)
+#define CLK_SRC_REG __REG(ELFIN_CLOCK_POWER_BASE + CLK_SRC_OFFSET)
+#define CLK_DIV0_REG __REG(ELFIN_CLOCK_POWER_BASE + CLK_DIV0_OFFSET)
+#define CLK_DIV1_REG __REG(ELFIN_CLOCK_POWER_BASE + CLK_DIV1_OFFSET)
+#define CLK_DIV2_REG __REG(ELFIN_CLOCK_POWER_BASE + CLK_DIV2_OFFSET)
+#define CLK_OUT_REG __REG(ELFIN_CLOCK_POWER_BASE + CLK_OUT_OFFSET)
+#define HCLK_GATE_REG __REG(ELFIN_CLOCK_POWER_BASE + HCLK_GATE_OFFSET)
+#define PCLK_GATE_REG __REG(ELFIN_CLOCK_POWER_BASE + PCLK_GATE_OFFSET)
+#define SCLK_GATE_REG __REG(ELFIN_CLOCK_POWER_BASE + SCLK_GATE_OFFSET)
+#define AHB_CON0_REG __REG(ELFIN_CLOCK_POWER_BASE + AHB_CON0_OFFSET)
+#define AHB_CON1_REG __REG(ELFIN_CLOCK_POWER_BASE + AHB_CON1_OFFSET)
+#define AHB_CON2_REG __REG(ELFIN_CLOCK_POWER_BASE + AHB_CON2_OFFSET)
+#define SELECT_DMA_REG __REG(ELFIN_CLOCK_POWER_BASE + \
+ SELECT_DMA_OFFSET)
+#define SW_RST_REG __REG(ELFIN_CLOCK_POWER_BASE + SW_RST_OFFSET)
+#define SYS_ID_REG __REG(ELFIN_CLOCK_POWER_BASE + SYS_ID_OFFSET)
+#define MEM_SYS_CFG_REG __REG(ELFIN_CLOCK_POWER_BASE + \
+ MEM_SYS_CFG_OFFSET)
+#define QOS_OVERRIDE0_REG __REG(ELFIN_CLOCK_POWER_BASE + \
+ QOS_OVERRIDE0_OFFSET)
+#define QOS_OVERRIDE1_REG __REG(ELFIN_CLOCK_POWER_BASE + \
+ QOS_OVERRIDE1_OFFSET)
+#define MEM_CFG_STAT_REG __REG(ELFIN_CLOCK_POWER_BASE + \
+ MEM_CFG_STAT_OFFSET)
+#define PWR_CFG_REG __REG(ELFIN_CLOCK_POWER_BASE + PWR_CFG_OFFSET)
+#define EINT_MASK_REG __REG(ELFIN_CLOCK_POWER_BASE + EINT_MASK_OFFSET)
+#define NOR_CFG_REG __REG(ELFIN_CLOCK_POWER_BASE + NOR_CFG_OFFSET)
+#define STOP_CFG_REG __REG(ELFIN_CLOCK_POWER_BASE + STOP_CFG_OFFSET)
+#define SLEEP_CFG_REG __REG(ELFIN_CLOCK_POWER_BASE + SLEEP_CFG_OFFSET)
+#define OSC_FREQ_REG __REG(ELFIN_CLOCK_POWER_BASE + OSC_FREQ_OFFSET)
+#define OSC_CNT_VAL_REG __REG(ELFIN_CLOCK_POWER_BASE + \
+ OSC_CNT_VAL_OFFSET)
+#define PWR_CNT_VAL_REG __REG(ELFIN_CLOCK_POWER_BASE + \
+ PWR_CNT_VAL_OFFSET)
+#define FPC_CNT_VAL_REG __REG(ELFIN_CLOCK_POWER_BASE + \
+ FPC_CNT_VAL_OFFSET)
+#define MTC_CNT_VAL_REG __REG(ELFIN_CLOCK_POWER_BASE + \
+ MTC_CNT_VAL_OFFSET)
+#define OTHERS_REG __REG(ELFIN_CLOCK_POWER_BASE + OTHERS_OFFSET)
+#define RST_STAT_REG __REG(ELFIN_CLOCK_POWER_BASE + RST_STAT_OFFSET)
+#define WAKEUP_STAT_REG __REG(ELFIN_CLOCK_POWER_BASE + \
+ WAKEUP_STAT_OFFSET)
+#define BLK_PWR_STAT_REG __REG(ELFIN_CLOCK_POWER_BASE + \
+ BLK_PWR_STAT_OFFSET)
+#define INF_REG0_REG __REG(ELFIN_CLOCK_POWER_BASE + INF_REG0_OFFSET)
+#define INF_REG1_REG __REG(ELFIN_CLOCK_POWER_BASE + INF_REG1_OFFSET)
+#define INF_REG2_REG __REG(ELFIN_CLOCK_POWER_BASE + INF_REG2_OFFSET)
+#define INF_REG3_REG __REG(ELFIN_CLOCK_POWER_BASE + INF_REG3_OFFSET)
+#define INF_REG4_REG __REG(ELFIN_CLOCK_POWER_BASE + INF_REG4_OFFSET)
+#define INF_REG5_REG __REG(ELFIN_CLOCK_POWER_BASE + INF_REG5_OFFSET)
+#define INF_REG6_REG __REG(ELFIN_CLOCK_POWER_BASE + INF_REG6_OFFSET)
+#define INF_REG7_REG __REG(ELFIN_CLOCK_POWER_BASE + INF_REG7_OFFSET)
+
+#define APLL_LOCK (ELFIN_CLOCK_POWER_BASE + APLL_LOCK_OFFSET)
+#define MPLL_LOCK (ELFIN_CLOCK_POWER_BASE + MPLL_LOCK_OFFSET)
+#define EPLL_LOCK (ELFIN_CLOCK_POWER_BASE + EPLL_LOCK_OFFSET)
+#define APLL_CON (ELFIN_CLOCK_POWER_BASE + APLL_CON_OFFSET)
+#define MPLL_CON (ELFIN_CLOCK_POWER_BASE + MPLL_CON_OFFSET)
+#define EPLL_CON0 (ELFIN_CLOCK_POWER_BASE + EPLL_CON0_OFFSET)
+#define EPLL_CON1 (ELFIN_CLOCK_POWER_BASE + EPLL_CON1_OFFSET)
+#define CLK_SRC (ELFIN_CLOCK_POWER_BASE + CLK_SRC_OFFSET)
+#define CLK_DIV0 (ELFIN_CLOCK_POWER_BASE + CLK_DIV0_OFFSET)
+#define CLK_DIV1 (ELFIN_CLOCK_POWER_BASE + CLK_DIV1_OFFSET)
+#define CLK_DIV2 (ELFIN_CLOCK_POWER_BASE + CLK_DIV2_OFFSET)
+#define CLK_OUT (ELFIN_CLOCK_POWER_BASE + CLK_OUT_OFFSET)
+#define HCLK_GATE (ELFIN_CLOCK_POWER_BASE + HCLK_GATE_OFFSET)
+#define PCLK_GATE (ELFIN_CLOCK_POWER_BASE + PCLK_GATE_OFFSET)
+#define SCLK_GATE (ELFIN_CLOCK_POWER_BASE + SCLK_GATE_OFFSET)
+#define AHB_CON0 (ELFIN_CLOCK_POWER_BASE + AHB_CON0_OFFSET)
+#define AHB_CON1 (ELFIN_CLOCK_POWER_BASE + AHB_CON1_OFFSET)
+#define AHB_CON2 (ELFIN_CLOCK_POWER_BASE + AHB_CON2_OFFSET)
+#define SELECT_DMA (ELFIN_CLOCK_POWER_BASE + SELECT_DMA_OFFSET)
+#define SW_RST (ELFIN_CLOCK_POWER_BASE + SW_RST_OFFSET)
+#define SYS_ID (ELFIN_CLOCK_POWER_BASE + SYS_ID_OFFSET)
+#define MEM_SYS_CFG (ELFIN_CLOCK_POWER_BASE + MEM_SYS_CFG_OFFSET)
+#define QOS_OVERRIDE0 (ELFIN_CLOCK_POWER_BASE + QOS_OVERRIDE0_OFFSET)
+#define QOS_OVERRIDE1 (ELFIN_CLOCK_POWER_BASE + QOS_OVERRIDE1_OFFSET)
+#define MEM_CFG_STAT (ELFIN_CLOCK_POWER_BASE + MEM_CFG_STAT_OFFSET)
+#define PWR_CFG (ELFIN_CLOCK_POWER_BASE + PWR_CFG_OFFSET)
+#define EINT_MASK (ELFIN_CLOCK_POWER_BASE + EINT_MASK_OFFSET)
+#define NOR_CFG (ELFIN_CLOCK_POWER_BASE + NOR_CFG_OFFSET)
+#define STOP_CFG (ELFIN_CLOCK_POWER_BASE + STOP_CFG_OFFSET)
+#define SLEEP_CFG (ELFIN_CLOCK_POWER_BASE + SLEEP_CFG_OFFSET)
+#define OSC_FREQ (ELFIN_CLOCK_POWER_BASE + OSC_FREQ_OFFSET)
+#define OSC_CNT_VAL (ELFIN_CLOCK_POWER_BASE + OSC_CNT_VAL_OFFSET)
+#define PWR_CNT_VAL (ELFIN_CLOCK_POWER_BASE + PWR_CNT_VAL_OFFSET)
+#define FPC_CNT_VAL (ELFIN_CLOCK_POWER_BASE + FPC_CNT_VAL_OFFSET)
+#define MTC_CNT_VAL (ELFIN_CLOCK_POWER_BASE + MTC_CNT_VAL_OFFSET)
+#define OTHERS (ELFIN_CLOCK_POWER_BASE + OTHERS_OFFSET)
+#define RST_STAT (ELFIN_CLOCK_POWER_BASE + RST_STAT_OFFSET)
+#define WAKEUP_STAT (ELFIN_CLOCK_POWER_BASE + WAKEUP_STAT_OFFSET)
+#define BLK_PWR_STAT (ELFIN_CLOCK_POWER_BASE + BLK_PWR_STAT_OFFSET)
+#define INF_REG0 (ELFIN_CLOCK_POWER_BASE + INF_REG0_OFFSET)
+#define INF_REG1 (ELFIN_CLOCK_POWER_BASE + INF_REG1_OFFSET)
+#define INF_REG2 (ELFIN_CLOCK_POWER_BASE + INF_REG2_OFFSET)
+#define INF_REG3 (ELFIN_CLOCK_POWER_BASE + INF_REG3_OFFSET)
+#define INF_REG4 (ELFIN_CLOCK_POWER_BASE + INF_REG4_OFFSET)
+#define INF_REG5 (ELFIN_CLOCK_POWER_BASE + INF_REG5_OFFSET)
+#define INF_REG6 (ELFIN_CLOCK_POWER_BASE + INF_REG6_OFFSET)
+#define INF_REG7 (ELFIN_CLOCK_POWER_BASE + INF_REG7_OFFSET)
+
+
+/*
+ * GPIO
+ */
+#define ELFIN_GPIO_BASE 0x7f008000
+
+#define GPACON_OFFSET 0x00
+#define GPADAT_OFFSET 0x04
+#define GPAPUD_OFFSET 0x08
+#define GPACONSLP_OFFSET 0x0C
+#define GPAPUDSLP_OFFSET 0x10
+#define GPBCON_OFFSET 0x20
+#define GPBDAT_OFFSET 0x04
+#define GPBPUD_OFFSET 0x08
+#define GPBCONSLP_OFFSET 0x0C
+#define GPBPUDSLP_OFFSET 0x30
+#define GPCCON_OFFSET 0x40
+#define GPCDAT_OFFSET 0x44
+#define GPCPUD_OFFSET 0x48
+#define GPCCONSLP_OFFSET 0x4C
+#define GPCPUDSLP_OFFSET 0x50
+#define GPDCON_OFFSET 0x60
+#define GPDDAT_OFFSET 0x64
+#define GPDPUD_OFFSET 0x68
+#define GPDCONSLP_OFFSET 0x6C
+#define GPDPUDSLP_OFFSET 0x70
+#define GPECON_OFFSET 0x80
+#define GPEDAT_OFFSET 0x84
+#define GPEPUD_OFFSET 0x88
+#define GPECONSLP_OFFSET 0x8C
+#define GPEPUDSLP_OFFSET 0x90
+#define GPFCON_OFFSET 0xA0
+#define GPFDAT_OFFSET 0xA4
+#define GPFPUD_OFFSET 0xA8
+#define GPFCONSLP_OFFSET 0xAC
+#define GPFPUDSLP_OFFSET 0xB0
+#define GPGCON_OFFSET 0xC0
+#define GPGDAT_OFFSET 0xC4
+#define GPGPUD_OFFSET 0xC8
+#define GPGCONSLP_OFFSET 0xCC
+#define GPGPUDSLP_OFFSET 0xD0
+#define GPHCON0_OFFSET 0xE0
+#define GPHCON1_OFFSET 0xE4
+#define GPHDAT_OFFSET 0xE8
+#define GPHPUD_OFFSET 0xEC
+#define GPHCONSLP_OFFSET 0xF0
+#define GPHPUDSLP_OFFSET 0xF4
+#define GPICON_OFFSET 0x100
+#define GPIDAT_OFFSET 0x104
+#define GPIPUD_OFFSET 0x108
+#define GPICONSLP_OFFSET 0x10C
+#define GPIPUDSLP_OFFSET 0x110
+#define GPJCON_OFFSET 0x120
+#define GPJDAT_OFFSET 0x124
+#define GPJPUD_OFFSET 0x128
+#define GPJCONSLP_OFFSET 0x12C
+#define GPJPUDSLP_OFFSET 0x130
+#define MEM0DRVCON_OFFSET 0x1D0
+#define MEM1DRVCON_OFFSET 0x1D4
+#define GPKCON0_OFFSET 0x800
+#define GPKCON1_OFFSET 0x804
+#define GPKDAT_OFFSET 0x808
+#define GPKPUD_OFFSET 0x80C
+#define GPLCON0_OFFSET 0x810
+#define GPLCON1_OFFSET 0x814
+#define GPLDAT_OFFSET 0x818
+#define GPLPUD_OFFSET 0x81C
+#define GPMCON_OFFSET 0x820
+#define GPMDAT_OFFSET 0x824
+#define GPMPUD_OFFSET 0x828
+#define GPNCON_OFFSET 0x830
+#define GPNDAT_OFFSET 0x834
+#define GPNPUD_OFFSET 0x838
+#define GPOCON_OFFSET 0x140
+#define GPODAT_OFFSET 0x144
+#define GPOPUD_OFFSET 0x148
+#define GPOCONSLP_OFFSET 0x14C
+#define GPOPUDSLP_OFFSET 0x150
+#define GPPCON_OFFSET 0x160
+#define GPPDAT_OFFSET 0x164
+#define GPPPUD_OFFSET 0x168
+#define GPPCONSLP_OFFSET 0x16C
+#define GPPPUDSLP_OFFSET 0x170
+#define GPQCON_OFFSET 0x180
+#define GPQDAT_OFFSET 0x184
+#define GPQPUD_OFFSET 0x188
+#define GPQCONSLP_OFFSET 0x18C
+#define GPQPUDSLP_OFFSET 0x190
+
+#define EINTPEND_OFFSET 0x924
+
+#define GPACON_REG __REG(ELFIN_GPIO_BASE + GPACON_OFFSET)
+#define GPADAT_REG __REG(ELFIN_GPIO_BASE + GPADAT_OFFSET)
+#define GPAPUD_REG __REG(ELFIN_GPIO_BASE + GPAPUD_OFFSET)
+#define GPACONSLP_REG __REG(ELFIN_GPIO_BASE + GPACONSLP_OFFSET)
+#define GPAPUDSLP_REG __REG(ELFIN_GPIO_BASE + GPAPUDSLP_OFFSET)
+#define GPBCON_REG __REG(ELFIN_GPIO_BASE + GPBCON_OFFSET)
+#define GPBDAT_REG __REG(ELFIN_GPIO_BASE + GPBDAT_OFFSET)
+#define GPBPUD_REG __REG(ELFIN_GPIO_BASE + GPBPUD_OFFSET)
+#define GPBCONSLP_REG __REG(ELFIN_GPIO_BASE + GPBCONSLP_OFFSET)
+#define GPBPUDSLP_REG __REG(ELFIN_GPIO_BASE + GPBPUDSLP_OFFSET)
+#define GPCCON_REG __REG(ELFIN_GPIO_BASE + GPCCON_OFFSET)
+#define GPCDAT_REG __REG(ELFIN_GPIO_BASE + GPCDAT_OFFSET)
+#define GPCPUD_REG __REG(ELFIN_GPIO_BASE + GPCPUD_OFFSET)
+#define GPCCONSLP_REG __REG(ELFIN_GPIO_BASE + GPCCONSLP_OFFSET)
+#define GPCPUDSLP_REG __REG(ELFIN_GPIO_BASE + GPCPUDSLP_OFFSET)
+#define GPDCON_REG __REG(ELFIN_GPIO_BASE + GPDCON_OFFSET)
+#define GPDDAT_REG __REG(ELFIN_GPIO_BASE + GPDDAT_OFFSET)
+#define GPDPUD_REG __REG(ELFIN_GPIO_BASE + GPDPUD_OFFSET)
+#define GPDCONSLP_REG __REG(ELFIN_GPIO_BASE + GPDCONSLP_OFFSET)
+#define GPDPUDSLP_REG __REG(ELFIN_GPIO_BASE + GPDPUDSLP_OFFSET)
+#define GPECON_REG __REG(ELFIN_GPIO_BASE + GPECON_OFFSET)
+#define GPEDAT_REG __REG(ELFIN_GPIO_BASE + GPEDAT_OFFSET)
+#define GPEPUD_REG __REG(ELFIN_GPIO_BASE + GPEPUD_OFFSET)
+#define GPECONSLP_REG __REG(ELFIN_GPIO_BASE + GPECONSLP_OFFSET)
+#define GPEPUDSLP_REG __REG(ELFIN_GPIO_BASE + GPEPUDSLP_OFFSET)
+#define GPFCON_REG __REG(ELFIN_GPIO_BASE + GPFCON_OFFSET)
+#define GPFDAT_REG __REG(ELFIN_GPIO_BASE + GPFDAT_OFFSET)
+#define GPFPUD_REG __REG(ELFIN_GPIO_BASE + GPFPUD_OFFSET)
+#define GPFCONSLP_REG __REG(ELFIN_GPIO_BASE + GPFCONSLP_OFFSET)
+#define GPFPUDSLP_REG __REG(ELFIN_GPIO_BASE + GPFPUDSLP_OFFSET)
+#define GPGCON_REG __REG(ELFIN_GPIO_BASE + GPGCON_OFFSET)
+#define GPGDAT_REG __REG(ELFIN_GPIO_BASE + GPGDAT_OFFSET)
+#define GPGPUD_REG __REG(ELFIN_GPIO_BASE + GPGPUD_OFFSET)
+#define GPGCONSLP_REG __REG(ELFIN_GPIO_BASE + GPGCONSLP_OFFSET)
+#define GPGPUDSLP_REG __REG(ELFIN_GPIO_BASE + GPGPUDSLP_OFFSET)
+#define GPHCON0_REG __REG(ELFIN_GPIO_BASE + GPHCON0_OFFSET)
+#define GPHCON1_REG __REG(ELFIN_GPIO_BASE + GPHCON1_OFFSET)
+#define GPHDAT_REG __REG(ELFIN_GPIO_BASE + GPHDAT_OFFSET)
+#define GPHPUD_REG __REG(ELFIN_GPIO_BASE + GPHPUD_OFFSET)
+#define GPHCONSLP_REG __REG(ELFIN_GPIO_BASE + GPHCONSLP_OFFSET)
+#define GPHPUDSLP_REG __REG(ELFIN_GPIO_BASE + GPHPUDSLP_OFFSET)
+#define GPICON_REG __REG(ELFIN_GPIO_BASE + GPICON_OFFSET)
+#define GPIDAT_REG __REG(ELFIN_GPIO_BASE + GPIDAT_OFFSET)
+#define GPIPUD_REG __REG(ELFIN_GPIO_BASE + GPIPUD_OFFSET)
+#define GPICONSLP_REG __REG(ELFIN_GPIO_BASE + GPICONSLP_OFFSET)
+#define GPIPUDSLP_REG __REG(ELFIN_GPIO_BASE + GPIPUDSLP_OFFSET)
+#define GPJCON_REG __REG(ELFIN_GPIO_BASE + GPJCON_OFFSET)
+#define GPJDAT_REG __REG(ELFIN_GPIO_BASE + GPJDAT_OFFSET)
+#define GPJPUD_REG __REG(ELFIN_GPIO_BASE + GPJPUD_OFFSET)
+#define GPJCONSLP_REG __REG(ELFIN_GPIO_BASE + GPJCONSLP_OFFSET)
+#define GPJPUDSLP_REG __REG(ELFIN_GPIO_BASE + GPJPUDSLP_OFFSET)
+#define GPKCON0_REG __REG(ELFIN_GPIO_BASE + GPKCON0_OFFSET)
+#define GPKCON1_REG __REG(ELFIN_GPIO_BASE + GPKCON1_OFFSET)
+#define GPKDAT_REG __REG(ELFIN_GPIO_BASE + GPKDAT_OFFSET)
+#define GPKPUD_REG __REG(ELFIN_GPIO_BASE + GPKPUD_OFFSET)
+#define GPLCON0_REG __REG(ELFIN_GPIO_BASE + GPLCON0_OFFSET)
+#define GPLCON1_REG __REG(ELFIN_GPIO_BASE + GPLCON1_OFFSET)
+#define GPLDAT_REG __REG(ELFIN_GPIO_BASE + GPLDAT_OFFSET)
+#define GPLPUD_REG __REG(ELFIN_GPIO_BASE + GPLPUD_OFFSET)
+#define GPMCON_REG __REG(ELFIN_GPIO_BASE + GPMCON_OFFSET)
+#define GPMDAT_REG __REG(ELFIN_GPIO_BASE + GPMDAT_OFFSET)
+#define GPMPUD_REG __REG(ELFIN_GPIO_BASE + GPMPUD_OFFSET)
+#define GPNCON_REG __REG(ELFIN_GPIO_BASE + GPNCON_OFFSET)
+#define GPNDAT_REG __REG(ELFIN_GPIO_BASE + GPNDAT_OFFSET)
+#define GPNPUD_REG __REG(ELFIN_GPIO_BASE + GPNPUD_OFFSET)
+#define GPOCON_REG __REG(ELFIN_GPIO_BASE + GPOCON_OFFSET)
+#define GPODAT_REG __REG(ELFIN_GPIO_BASE + GPODAT_OFFSET)
+#define GPOPUD_REG __REG(ELFIN_GPIO_BASE + GPOPUD_OFFSET)
+#define GPOCONSLP_REG __REG(ELFIN_GPIO_BASE + GPOCONSLP_OFFSET)
+#define GPOPUDSLP_REG __REG(ELFIN_GPIO_BASE + GPOPUDSLP_OFFSET)
+#define GPPCON_REG __REG(ELFIN_GPIO_BASE + GPPCON_OFFSET)
+#define GPPDAT_REG __REG(ELFIN_GPIO_BASE + GPPDAT_OFFSET)
+#define GPPPUD_REG __REG(ELFIN_GPIO_BASE + GPPPUD_OFFSET)
+#define GPPCONSLP_REG __REG(ELFIN_GPIO_BASE + GPPCONSLP_OFFSET)
+#define GPPPUDSLP_REG __REG(ELFIN_GPIO_BASE + GPPPUDSLP_OFFSET)
+#define GPQCON_REG __REG(ELFIN_GPIO_BASE + GPQCON_OFFSET)
+#define GPQDAT_REG __REG(ELFIN_GPIO_BASE + GPQDAT_OFFSET)
+#define GPQPUD_REG __REG(ELFIN_GPIO_BASE + GPQPUD_OFFSET)
+#define GPQCONSLP_REG __REG(ELFIN_GPIO_BASE + GPQCONSLP_OFFSET)
+#define GPQPUDSLP_REG __REG(ELFIN_GPIO_BASE + GPQPUDSLP_OFFSET)
+
+/*
+ * Bus Matrix
+ */
+#define ELFIN_MEM_SYS_CFG 0x7e00f120
+
+#define GPACON (ELFIN_GPIO_BASE + GPACON_OFFSET)
+#define GPADAT (ELFIN_GPIO_BASE + GPADAT_OFFSET)
+#define GPAPUD (ELFIN_GPIO_BASE + GPAPUD_OFFSET)
+#define GPACONSLP (ELFIN_GPIO_BASE + GPACONSLP_OFFSET)
+#define GPAPUDSLP (ELFIN_GPIO_BASE + GPAPUDSLP_OFFSET)
+#define GPBCON (ELFIN_GPIO_BASE + GPBCON_OFFSET)
+#define GPBDAT (ELFIN_GPIO_BASE + GPBDAT_OFFSET)
+#define GPBPUD (ELFIN_GPIO_BASE + GPBPUD_OFFSET)
+#define GPBCONSLP (ELFIN_GPIO_BASE + GPBCONSLP_OFFSET)
+#define GPBPUDSLP (ELFIN_GPIO_BASE + GPBPUDSLP_OFFSET)
+#define GPCCON (ELFIN_GPIO_BASE + GPCCON_OFFSET)
+#define GPCDAT (ELFIN_GPIO_BASE + GPCDAT_OFFSET)
+#define GPCPUD (ELFIN_GPIO_BASE + GPCPUD_OFFSET)
+#define GPCCONSLP (ELFIN_GPIO_BASE + GPCCONSLP_OFFSET)
+#define GPCPUDSLP (ELFIN_GPIO_BASE + GPCPUDSLP_OFFSET)
+#define GPDCON (ELFIN_GPIO_BASE + GPDCON_OFFSET)
+#define GPDDAT (ELFIN_GPIO_BASE + GPDDAT_OFFSET)
+#define GPDPUD (ELFIN_GPIO_BASE + GPDPUD_OFFSET)
+#define GPDCONSLP (ELFIN_GPIO_BASE + GPDCONSLP_OFFSET)
+#define GPDPUDSLP (ELFIN_GPIO_BASE + GPDPUDSLP_OFFSET)
+#define GPECON (ELFIN_GPIO_BASE + GPECON_OFFSET)
+#define GPEDAT (ELFIN_GPIO_BASE + GPEDAT_OFFSET)
+#define GPEPUD (ELFIN_GPIO_BASE + GPEPUD_OFFSET)
+#define GPECONSLP (ELFIN_GPIO_BASE + GPECONSLP_OFFSET)
+#define GPEPUDSLP (ELFIN_GPIO_BASE + GPEPUDSLP_OFFSET)
+#define GPFCON (ELFIN_GPIO_BASE + GPFCON_OFFSET)
+#define GPFDAT (ELFIN_GPIO_BASE + GPFDAT_OFFSET)
+#define GPFPUD (ELFIN_GPIO_BASE + GPFPUD_OFFSET)
+#define GPFCONSLP (ELFIN_GPIO_BASE + GPFCONSLP_OFFSET)
+#define GPFPUDSLP (ELFIN_GPIO_BASE + GPFPUDSLP_OFFSET)
+#define GPGCON (ELFIN_GPIO_BASE + GPGCON_OFFSET)
+#define GPGDAT (ELFIN_GPIO_BASE + GPGDAT_OFFSET)
+#define GPGPUD (ELFIN_GPIO_BASE + GPGPUD_OFFSET)
+#define GPGCONSLP (ELFIN_GPIO_BASE + GPGCONSLP_OFFSET)
+#define GPGPUDSLP (ELFIN_GPIO_BASE + GPGPUDSLP_OFFSET)
+#define GPHCON0 (ELFIN_GPIO_BASE + GPHCON0_OFFSET)
+#define GPHCON1 (ELFIN_GPIO_BASE + GPHCON1_OFFSET)
+#define GPHDAT (ELFIN_GPIO_BASE + GPHDAT_OFFSET)
+#define GPHPUD (ELFIN_GPIO_BASE + GPHPUD_OFFSET)
+#define GPHCONSLP (ELFIN_GPIO_BASE + GPHCONSLP_OFFSET)
+#define GPHPUDSLP (ELFIN_GPIO_BASE + GPHPUDSLP_OFFSET)
+#define GPICON (ELFIN_GPIO_BASE + GPICON_OFFSET)
+#define GPIDAT (ELFIN_GPIO_BASE + GPIDAT_OFFSET)
+#define GPIPUD (ELFIN_GPIO_BASE + GPIPUD_OFFSET)
+#define GPICONSLP (ELFIN_GPIO_BASE + GPICONSLP_OFFSET)
+#define GPIPUDSLP (ELFIN_GPIO_BASE + GPIPUDSLP_OFFSET)
+#define GPJCON (ELFIN_GPIO_BASE + GPJCON_OFFSET)
+#define GPJDAT (ELFIN_GPIO_BASE + GPJDAT_OFFSET)
+#define GPJPUD (ELFIN_GPIO_BASE + GPJPUD_OFFSET)
+#define GPJCONSLP (ELFIN_GPIO_BASE + GPJCONSLP_OFFSET)
+#define GPJPUDSLP (ELFIN_GPIO_BASE + GPJPUDSLP_OFFSET)
+#define GPKCON0 (ELFIN_GPIO_BASE + GPKCON0_OFFSET)
+#define GPKCON1 (ELFIN_GPIO_BASE + GPKCON1_OFFSET)
+#define GPKDAT (ELFIN_GPIO_BASE + GPKDAT_OFFSET)
+#define GPKPUD (ELFIN_GPIO_BASE + GPKPUD_OFFSET)
+#define GPLCON0 (ELFIN_GPIO_BASE + GPLCON0_OFFSET)
+#define GPLCON1 (ELFIN_GPIO_BASE + GPLCON1_OFFSET)
+#define GPLDAT (ELFIN_GPIO_BASE + GPLDAT_OFFSET)
+#define GPLPUD (ELFIN_GPIO_BASE + GPLPUD_OFFSET)
+#define GPMCON (ELFIN_GPIO_BASE + GPMCON_OFFSET)
+#define GPMDAT (ELFIN_GPIO_BASE + GPMDAT_OFFSET)
+#define GPMPUD (ELFIN_GPIO_BASE + GPMPUD_OFFSET)
+#define GPNCON (ELFIN_GPIO_BASE + GPNCON_OFFSET)
+#define GPNDAT (ELFIN_GPIO_BASE + GPNDAT_OFFSET)
+#define GPNPUD (ELFIN_GPIO_BASE + GPNPUD_OFFSET)
+#define GPOCON (ELFIN_GPIO_BASE + GPOCON_OFFSET)
+#define GPODAT (ELFIN_GPIO_BASE + GPODAT_OFFSET)
+#define GPOPUD (ELFIN_GPIO_BASE + GPOPUD_OFFSET)
+#define GPOCONSLP (ELFIN_GPIO_BASE + GPOCONSLP_OFFSET)
+#define GPOPUDSLP (ELFIN_GPIO_BASE + GPOPUDSLP_OFFSET)
+#define GPPCON (ELFIN_GPIO_BASE + GPPCON_OFFSET)
+#define GPPDAT (ELFIN_GPIO_BASE + GPPDAT_OFFSET)
+#define GPPPUD (ELFIN_GPIO_BASE + GPPPUD_OFFSET)
+#define GPPCONSLP (ELFIN_GPIO_BASE + GPPCONSLP_OFFSET)
+#define GPPPUDSLP (ELFIN_GPIO_BASE + GPPPUDSLP_OFFSET)
+#define GPQCON (ELFIN_GPIO_BASE + GPQCON_OFFSET)
+#define GPQDAT (ELFIN_GPIO_BASE + GPQDAT_OFFSET)
+#define GPQPUD (ELFIN_GPIO_BASE + GPQPUD_OFFSET)
+#define GPQCONSLP (ELFIN_GPIO_BASE + GPQCONSLP_OFFSET)
+#define GPQPUDSLP (ELFIN_GPIO_BASE + GPQPUDSLP_OFFSET)
+
+/*
+ * Memory controller
+ */
+#define ELFIN_SROM_BASE 0x70000000
+
+#define SROM_BW_REG __REG(ELFIN_SROM_BASE + 0x0)
+#define SROM_BC0_REG __REG(ELFIN_SROM_BASE + 0x4)
+#define SROM_BC1_REG __REG(ELFIN_SROM_BASE + 0x8)
+#define SROM_BC2_REG __REG(ELFIN_SROM_BASE + 0xC)
+#define SROM_BC3_REG __REG(ELFIN_SROM_BASE + 0x10)
+#define SROM_BC4_REG __REG(ELFIN_SROM_BASE + 0x14)
+#define SROM_BC5_REG __REG(ELFIN_SROM_BASE + 0x18)
+
+/*
+ * SDRAM Controller
+ */
+#define ELFIN_DMC0_BASE 0x7e000000
+#define ELFIN_DMC1_BASE 0x7e001000
+
+#define INDEX_DMC_MEMC_STATUS 0x00
+#define INDEX_DMC_MEMC_CMD 0x04
+#define INDEX_DMC_DIRECT_CMD 0x08
+#define INDEX_DMC_MEMORY_CFG 0x0C
+#define INDEX_DMC_REFRESH_PRD 0x10
+#define INDEX_DMC_CAS_LATENCY 0x14
+#define INDEX_DMC_T_DQSS 0x18
+#define INDEX_DMC_T_MRD 0x1C
+#define INDEX_DMC_T_RAS 0x20
+#define INDEX_DMC_T_RC 0x24
+#define INDEX_DMC_T_RCD 0x28
+#define INDEX_DMC_T_RFC 0x2C
+#define INDEX_DMC_T_RP 0x30
+#define INDEX_DMC_T_RRD 0x34
+#define INDEX_DMC_T_WR 0x38
+#define INDEX_DMC_T_WTR 0x3C
+#define INDEX_DMC_T_XP 0x40
+#define INDEX_DMC_T_XSR 0x44
+#define INDEX_DMC_T_ESR 0x48
+#define INDEX_DMC_MEMORY_CFG2 0x4C
+#define INDEX_DMC_CHIP_0_CFG 0x200
+#define INDEX_DMC_CHIP_1_CFG 0x204
+#define INDEX_DMC_CHIP_2_CFG 0x208
+#define INDEX_DMC_CHIP_3_CFG 0x20C
+#define INDEX_DMC_USER_STATUS 0x300
+#define INDEX_DMC_USER_CONFIG 0x304
+
+/*
+ * Memory Chip direct command
+ */
+#define DMC_NOP0 0x0c0000
+#define DMC_NOP1 0x1c0000
+#define DMC_PA0 0x000000 /* Precharge all */
+#define DMC_PA1 0x100000
+#define DMC_AR0 0x040000 /* Autorefresh */
+#define DMC_AR1 0x140000
+#define DMC_SDR_MR0 0x080032 /* MRS, CAS 3, Burst Length 4 */
+#define DMC_SDR_MR1 0x180032
+#define DMC_DDR_MR0 0x080162
+#define DMC_DDR_MR1 0x180162
+#define DMC_mDDR_MR0 0x080032 /* CAS 3, Burst Length 4 */
+#define DMC_mDDR_MR1 0x180032
+#define DMC_mSDR_EMR0 0x0a0000 /* EMRS, DS:Full, PASR:Full Array */
+#define DMC_mSDR_EMR1 0x1a0000
+#define DMC_DDR_EMR0 0x090000
+#define DMC_DDR_EMR1 0x190000
+#define DMC_mDDR_EMR0 0x0a0000 /* DS:Full, PASR:Full Array */
+#define DMC_mDDR_EMR1 0x1a0000
+
+/*
+ * Definitions for memory configuration
+ * Set memory configuration
+ * active_chips = 1'b0 (1 chip)
+ * qos_master_chip = 3'b000(ARID[3:0])
+ * memory burst = 3'b010(burst 4)
+ * stop_mem_clock = 1'b0(disable dynamical stop)
+ * auto_power_down = 1'b0(disable auto power-down mode)
+ * power_down_prd = 6'b00_0000(0 cycle for auto power-down)
+ * ap_bit = 1'b0 (bit position of auto-precharge is 10)
+ * row_bits = 3'b010(# row address 13)
+ * column_bits = 3'b010(# column address 10 )
+ *
+ * Set user configuration
+ * 2'b10=SDRAM/mSDRAM, 2'b11=DDR, 2'b01=mDDR
+ *
+ * Set chip select for chip [n]
+ * row bank control, bank address 0x3000_0000 ~ 0x37ff_ffff
+ * CHIP_[n]_CFG=0x30F8, 30: ADDR[31:24], F8: Mask[31:24]
+ */
+
+/*
+ * Nand flash controller
+ */
+#define ELFIN_NAND_BASE 0x70200000
+
+#define NFCONF_OFFSET 0x00
+#define NFCONT_OFFSET 0x04
+#define NFCMMD_OFFSET 0x08
+#define NFADDR_OFFSET 0x0c
+#define NFDATA_OFFSET 0x10
+#define NFMECCDATA0_OFFSET 0x14
+#define NFMECCDATA1_OFFSET 0x18
+#define NFSECCDATA0_OFFSET 0x1c
+#define NFSBLK_OFFSET 0x20
+#define NFEBLK_OFFSET 0x24
+#define NFSTAT_OFFSET 0x28
+#define NFESTAT0_OFFSET 0x2c
+#define NFESTAT1_OFFSET 0x30
+#define NFMECC0_OFFSET 0x34
+#define NFMECC1_OFFSET 0x38
+#define NFSECC_OFFSET 0x3c
+#define NFMLCBITPT_OFFSET 0x40
+
+#define NFCONF (ELFIN_NAND_BASE + NFCONF_OFFSET)
+#define NFCONT (ELFIN_NAND_BASE + NFCONT_OFFSET)
+#define NFCMMD (ELFIN_NAND_BASE + NFCMMD_OFFSET)
+#define NFADDR (ELFIN_NAND_BASE + NFADDR_OFFSET)
+#define NFDATA (ELFIN_NAND_BASE + NFDATA_OFFSET)
+#define NFMECCDATA0 (ELFIN_NAND_BASE + NFMECCDATA0_OFFSET)
+#define NFMECCDATA1 (ELFIN_NAND_BASE + NFMECCDATA1_OFFSET)
+#define NFSECCDATA0 (ELFIN_NAND_BASE + NFSECCDATA0_OFFSET)
+#define NFSBLK (ELFIN_NAND_BASE + NFSBLK_OFFSET)
+#define NFEBLK (ELFIN_NAND_BASE + NFEBLK_OFFSET)
+#define NFSTAT (ELFIN_NAND_BASE + NFSTAT_OFFSET)
+#define NFESTAT0 (ELFIN_NAND_BASE + NFESTAT0_OFFSET)
+#define NFESTAT1 (ELFIN_NAND_BASE + NFESTAT1_OFFSET)
+#define NFMECC0 (ELFIN_NAND_BASE + NFMECC0_OFFSET)
+#define NFMECC1 (ELFIN_NAND_BASE + NFMECC1_OFFSET)
+#define NFSECC (ELFIN_NAND_BASE + NFSECC_OFFSET)
+#define NFMLCBITPT (ELFIN_NAND_BASE + NFMLCBITPT_OFFSET)
+
+#define NFCONF_REG __REG(ELFIN_NAND_BASE + NFCONF_OFFSET)
+#define NFCONT_REG __REG(ELFIN_NAND_BASE + NFCONT_OFFSET)
+#define NFCMD_REG __REG(ELFIN_NAND_BASE + NFCMMD_OFFSET)
+#define NFADDR_REG __REG(ELFIN_NAND_BASE + NFADDR_OFFSET)
+#define NFDATA_REG __REG(ELFIN_NAND_BASE + NFDATA_OFFSET)
+#define NFDATA8_REG __REGb(ELFIN_NAND_BASE + NFDATA_OFFSET)
+#define NFMECCDATA0_REG __REG(ELFIN_NAND_BASE + NFMECCDATA0_OFFSET)
+#define NFMECCDATA1_REG __REG(ELFIN_NAND_BASE + NFMECCDATA1_OFFSET)
+#define NFSECCDATA0_REG __REG(ELFIN_NAND_BASE + NFSECCDATA0_OFFSET)
+#define NFSBLK_REG __REG(ELFIN_NAND_BASE + NFSBLK_OFFSET)
+#define NFEBLK_REG __REG(ELFIN_NAND_BASE + NFEBLK_OFFSET)
+#define NFSTAT_REG __REG(ELFIN_NAND_BASE + NFSTAT_OFFSET)
+#define NFESTAT0_REG __REG(ELFIN_NAND_BASE + NFESTAT0_OFFSET)
+#define NFESTAT1_REG __REG(ELFIN_NAND_BASE + NFESTAT1_OFFSET)
+#define NFMECC0_REG __REG(ELFIN_NAND_BASE + NFMECC0_OFFSET)
+#define NFMECC1_REG __REG(ELFIN_NAND_BASE + NFMECC1_OFFSET)
+#define NFSECC_REG __REG(ELFIN_NAND_BASE + NFSECC_OFFSET)
+#define NFMLCBITPT_REG __REG(ELFIN_NAND_BASE + NFMLCBITPT_OFFSET)
+
+#define NFCONF_ECC_4BIT (1<<24)
+
+#define NFCONT_ECC_ENC (1<<18)
+#define NFCONT_WP (1<<16)
+#define NFCONT_MECCLOCK (1<<7)
+#define NFCONT_SECCLOCK (1<<6)
+#define NFCONT_INITMECC (1<<5)
+#define NFCONT_INITSECC (1<<4)
+#define NFCONT_INITECC (NFCONT_INITMECC | NFCONT_INITSECC)
+#define NFCONT_CS_ALT (1<<2)
+#define NFCONT_CS (1<<1)
+#define NFCONT_ENABLE (1<<0)
+
+#define NFSTAT_ECCENCDONE (1<<7)
+#define NFSTAT_ECCDECDONE (1<<6)
+#define NFSTAT_RnB (1<<0)
+
+#define NFESTAT0_ECCBUSY (1<<31)
+
+/*
+ * Interrupt
+ */
+#define ELFIN_VIC0_BASE_ADDR 0x71200000
+#define ELFIN_VIC1_BASE_ADDR 0x71300000
+#define oINTMOD 0x0C /* VIC INT SELECT (IRQ or FIQ) */
+#define oINTUNMSK 0x10 /* VIC INT EN (write 1 to unmask) */
+#define oINTMSK 0x14 /* VIC INT EN CLEAR (write 1 to mask) */
+#define oINTSUBMSK 0x1C /* VIC SOFT INT CLEAR */
+#define oVECTADDR 0xF00 /* VIC ADDRESS */
+
+/*
+ * Watchdog timer
+ */
+#define ELFIN_WATCHDOG_BASE 0x7E004000
+
+#define WTCON_REG __REG(0x7E004004)
+#define WTDAT_REG __REG(0x7E004008)
+#define WTCNT_REG __REG(0x7E00400C)
+
+
+/*
+ * UART
+ */
+#define ELFIN_UART_BASE 0x7F005000
+
+#define ELFIN_UART0_OFFSET 0x0000
+#define ELFIN_UART1_OFFSET 0x0400
+#define ELFIN_UART2_OFFSET 0x0800
+
+#define ULCON_OFFSET 0x00
+#define UCON_OFFSET 0x04
+#define UFCON_OFFSET 0x08
+#define UMCON_OFFSET 0x0C
+#define UTRSTAT_OFFSET 0x10
+#define UERSTAT_OFFSET 0x14
+#define UFSTAT_OFFSET 0x18
+#define UMSTAT_OFFSET 0x1C
+#define UTXH_OFFSET 0x20
+#define URXH_OFFSET 0x24
+#define UBRDIV_OFFSET 0x28
+#define UDIVSLOT_OFFSET 0x2C
+#define UINTP_OFFSET 0x30
+#define UINTSP_OFFSET 0x34
+#define UINTM_OFFSET 0x38
+
+#define ULCON0_REG __REG(0x7F005000)
+#define UCON0_REG __REG(0x7F005004)
+#define UFCON0_REG __REG(0x7F005008)
+#define UMCON0_REG __REG(0x7F00500C)
+#define UTRSTAT0_REG __REG(0x7F005010)
+#define UERSTAT0_REG __REG(0x7F005014)
+#define UFSTAT0_REG __REG(0x7F005018)
+#define UMSTAT0_REG __REG(0x7F00501c)
+#define UTXH0_REG __REG(0x7F005020)
+#define URXH0_REG __REG(0x7F005024)
+#define UBRDIV0_REG __REG(0x7F005028)
+#define UDIVSLOT0_REG __REG(0x7F00502c)
+#define UINTP0_REG __REG(0x7F005030)
+#define UINTSP0_REG __REG(0x7F005034)
+#define UINTM0_REG __REG(0x7F005038)
+
+#define ULCON1_REG __REG(0x7F005400)
+#define UCON1_REG __REG(0x7F005404)
+#define UFCON1_REG __REG(0x7F005408)
+#define UMCON1_REG __REG(0x7F00540C)
+#define UTRSTAT1_REG __REG(0x7F005410)
+#define UERSTAT1_REG __REG(0x7F005414)
+#define UFSTAT1_REG __REG(0x7F005418)
+#define UMSTAT1_REG __REG(0x7F00541c)
+#define UTXH1_REG __REG(0x7F005420)
+#define URXH1_REG __REG(0x7F005424)
+#define UBRDIV1_REG __REG(0x7F005428)
+#define UDIVSLOT1_REG __REG(0x7F00542c)
+#define UINTP1_REG __REG(0x7F005430)
+#define UINTSP1_REG __REG(0x7F005434)
+#define UINTM1_REG __REG(0x7F005438)
+
+#define UTRSTAT_TX_EMPTY (1 << 2)
+#define UTRSTAT_RX_READY (1 << 0)
+#define UART_ERR_MASK 0xF
+
+/*
+ * PWM timer
+ */
+#define ELFIN_TIMER_BASE 0x7F006000
+
+#define TCFG0_REG __REG(0x7F006000)
+#define TCFG1_REG __REG(0x7F006004)
+#define TCON_REG __REG(0x7F006008)
+#define TCNTB0_REG __REG(0x7F00600c)
+#define TCMPB0_REG __REG(0x7F006010)
+#define TCNTO0_REG __REG(0x7F006014)
+#define TCNTB1_REG __REG(0x7F006018)
+#define TCMPB1_REG __REG(0x7F00601c)
+#define TCNTO1_REG __REG(0x7F006020)
+#define TCNTB2_REG __REG(0x7F006024)
+#define TCMPB2_REG __REG(0x7F006028)
+#define TCNTO2_REG __REG(0x7F00602c)
+#define TCNTB3_REG __REG(0x7F006030)
+#define TCMPB3_REG __REG(0x7F006034)
+#define TCNTO3_REG __REG(0x7F006038)
+#define TCNTB4_REG __REG(0x7F00603c)
+#define TCNTO4_REG __REG(0x7F006040)
+
+/* Fields */
+#define fTCFG0_DZONE Fld(8, 16) /* the dead zone length (=timer 0) */
+#define fTCFG0_PRE1 Fld(8, 8) /* prescaler value for time 2,3,4 */
+#define fTCFG0_PRE0 Fld(8, 0) /* prescaler value for time 0,1 */
+#define fTCFG1_MUX4 Fld(4, 16)
+/* bits */
+#define TCFG0_DZONE(x) FInsrt((x), fTCFG0_DZONE)
+#define TCFG0_PRE1(x) FInsrt((x), fTCFG0_PRE1)
+#define TCFG0_PRE0(x) FInsrt((x), fTCFG0_PRE0)
+#define TCON_4_AUTO (1 << 22) /* auto reload on/off for Timer 4 */
+#define TCON_4_UPDATE (1 << 21) /* manual Update TCNTB4 */
+#define TCON_4_ONOFF (1 << 20) /* 0: Stop, 1: start Timer 4 */
+#define COUNT_4_ON (TCON_4_ONOFF * 1)
+#define COUNT_4_OFF (TCON_4_ONOFF * 0)
+#define TCON_3_AUTO (1 << 19) /* auto reload on/off for Timer 3 */
+#define TIMER3_ATLOAD_ON (TCON_3_AUTO * 1)
+#define TIMER3_ATLAOD_OFF FClrBit(TCON, TCON_3_AUTO)
+#define TCON_3_INVERT (1 << 18) /* 1: Inverter on for TOUT3 */
+#define TIMER3_IVT_ON (TCON_3_INVERT * 1)
+#define TIMER3_IVT_OFF (FClrBit(TCON, TCON_3_INVERT))
+#define TCON_3_MAN (1 << 17) /* manual Update TCNTB3,TCMPB3 */
+#define TIMER3_MANUP (TCON_3_MAN*1)
+#define TIMER3_NOP (FClrBit(TCON, TCON_3_MAN))
+#define TCON_3_ONOFF (1 << 16) /* 0: Stop, 1: start Timer 3 */
+#define TIMER3_ON (TCON_3_ONOFF * 1)
+#define TIMER3_OFF (FClrBit(TCON, TCON_3_ONOFF))
+
+#if defined(CONFIG_CLK_400_100_50)
+#define STARTUP_AMDIV 400
+#define STARTUP_MDIV 400
+#define STARTUP_PDIV 6
+#define STARTUP_SDIV 1
+#elif defined(CONFIG_CLK_400_133_66)
+#define STARTUP_AMDIV 400
+#define STARTUP_MDIV 533
+#define STARTUP_PDIV 6
+#define STARTUP_SDIV 1
+#elif defined(CONFIG_CLK_533_133_66)
+#define STARTUP_AMDIV 533
+#define STARTUP_MDIV 533
+#define STARTUP_PDIV 6
+#define STARTUP_SDIV 1
+#elif defined(CONFIG_CLK_667_133_66)
+#define STARTUP_AMDIV 667
+#define STARTUP_MDIV 533
+#define STARTUP_PDIV 6
+#define STARTUP_SDIV 1
+#endif
+
+#define STARTUP_PCLKDIV 3
+#define STARTUP_HCLKX2DIV 1
+#define STARTUP_HCLKDIV 1
+#define STARTUP_MPLLDIV 1
+#define STARTUP_APLLDIV 0
+
+#define CLK_DIV_VAL ((STARTUP_PCLKDIV << 12) | (STARTUP_HCLKX2DIV << 9) | \
+ (STARTUP_HCLKDIV << 8) | (STARTUP_MPLLDIV<<4) | STARTUP_APLLDIV)
+#define MPLL_VAL ((1 << 31) | (STARTUP_MDIV << 16) | \
+ (STARTUP_PDIV << 8) | STARTUP_SDIV)
+#define STARTUP_MPLL (((CONFIG_SYS_CLK_FREQ >> STARTUP_SDIV) / \
+ STARTUP_PDIV) * STARTUP_MDIV)
+
+#if defined(CONFIG_SYNC_MODE)
+#define APLL_VAL ((1 << 31) | (STARTUP_MDIV << 16) | \
+ (STARTUP_PDIV << 8) | STARTUP_SDIV)
+#define STARTUP_APLL (((CONFIG_SYS_CLK_FREQ >> STARTUP_SDIV) / \
+ STARTUP_PDIV) * STARTUP_MDIV)
+#define STARTUP_HCLK (STARTUP_MPLL / (STARTUP_HCLKX2DIV + 1) / \
+ (STARTUP_HCLKDIV + 1))
+#else
+#define APLL_VAL ((1 << 31) | (STARTUP_AMDIV << 16) | \
+ (STARTUP_PDIV << 8) | STARTUP_SDIV)
+#define STARTUP_APLL (((CONFIG_SYS_CLK_FREQ >> STARTUP_SDIV) / \
+ STARTUP_PDIV) * STARTUP_AMDIV)
+#define STARTUP_HCLK (STARTUP_MPLL / (STARTUP_HCLKX2DIV + 1) / \
+ (STARTUP_HCLKDIV + 1))
+#endif
+
+
+/*-----------------------------------------------------------------------
+ * Physical Memory Map
+ */
+#define DMC1_MEM_CFG 0x80010012 /* Chip1, Burst4, Row/Column bit */
+#define DMC1_MEM_CFG2 0xB45
+#define DMC1_CHIP0_CFG 0x150F8 /* 0x4000_0000 ~ 0x43ff_ffff (64MB) */
+#define DMC_DDR_32_CFG 0x0 /* 32bit, DDR */
+
+/* Memory Parameters */
+/* DDR Parameters */
+#define DDR_tREFRESH 7800 /* ns */
+#define DDR_tRAS 45 /* ns (min: 45ns)*/
+#define DDR_tRC 68 /* ns (min: 67.5ns)*/
+#define DDR_tRCD 23 /* ns (min: 22.5ns)*/
+#define DDR_tRFC 80 /* ns (min: 80ns)*/
+#define DDR_tRP 23 /* ns (min: 22.5ns)*/
+#define DDR_tRRD 15 /* ns (min: 15ns)*/
+#define DDR_tWR 15 /* ns (min: 15ns)*/
+#define DDR_tXSR 120 /* ns (min: 120ns)*/
+#define DDR_CASL 3 /* CAS Latency 3 */
+
+/*
+ * mDDR memory configuration
+ */
+
+#define NS_TO_CLK(t) ((STARTUP_HCLK / 1000 * (t) - 1) / 1000000)
+
+#define DMC_DDR_BA_EMRS 2
+#define DMC_DDR_MEM_CASLAT 3
+/* 6 Set Cas Latency to 3 */
+#define DMC_DDR_CAS_LATENCY (DDR_CASL << 1)
+/* Min 0.75 ~ 1.25 */
+#define DMC_DDR_t_DQSS 1
+/* Min 2 tck */
+#define DMC_DDR_t_MRD 2
+/* 7, Min 45ns */
+#define DMC_DDR_t_RAS (NS_TO_CLK(DDR_tRAS) + 1)
+/* 10, Min 67.5ns */
+#define DMC_DDR_t_RC (NS_TO_CLK(DDR_tRC) + 1)
+/* 4,5(TRM), Min 22.5ns */
+#define DMC_DDR_t_RCD (NS_TO_CLK(DDR_tRCD) + 1)
+#define DMC_DDR_schedule_RCD ((DMC_DDR_t_RCD - 3) << 3)
+/* 11,18(TRM) Min 80ns */
+#define DMC_DDR_t_RFC (NS_TO_CLK(DDR_tRFC) + 1)
+#define DMC_DDR_schedule_RFC ((DMC_DDR_t_RFC - 3) << 5)
+/* 4, 5(TRM) Min 22.5ns */
+#define DMC_DDR_t_RP (NS_TO_CLK(DDR_tRP) + 1)
+#define DMC_DDR_schedule_RP ((DMC_DDR_t_RP - 3) << 3)
+/* 3, Min 15ns */
+#define DMC_DDR_t_RRD (NS_TO_CLK(DDR_tRRD) + 1)
+/* Min 15ns */
+#define DMC_DDR_t_WR (NS_TO_CLK(DDR_tWR) + 1)
+#define DMC_DDR_t_WTR 2
+/* 1tck + tIS(1.5ns) */
+#define DMC_DDR_t_XP 2
+/* 17, Min 120ns */
+#define DMC_DDR_t_XSR (NS_TO_CLK(DDR_tXSR) + 1)
+#define DMC_DDR_t_ESR DMC_DDR_t_XSR
+/* TRM 2656 */
+#define DMC_DDR_REFRESH_PRD (NS_TO_CLK(DDR_tREFRESH))
+/* 2b01 : mDDR */
+#define DMC_DDR_USER_CONFIG 1
+
+#ifndef __ASSEMBLY__
+enum s3c64xx_uarts_nr {
+ S3C64XX_UART0,
+ S3C64XX_UART1,
+ S3C64XX_UART2,
+};
+
+#include "s3c64x0.h"
+
+static inline s3c64xx_uart *s3c64xx_get_base_uart(enum s3c64xx_uarts_nr nr)
+{
+ return (s3c64xx_uart *)(ELFIN_UART_BASE + (nr * 0x400));
+}
+#endif
+
+#endif /*__S3C6400_H__*/
diff --git a/include/s3c64x0.h b/include/s3c64x0.h
new file mode 100644
index 0000000..0bbf1d0
--- /dev/null
+++ b/include/s3c64x0.h
@@ -0,0 +1,90 @@
+/*
+ * (C) Copyright 2003
+ * David MÃŒller ELSOFT AG Switzerland. d.mueller@elsoft.ch
+ *
+ * (C) Copyright 2008
+ * Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/************************************************
+ * NAME : S3C64XX.h
+ * Version : 31.3.2003
+ *
+ * common stuff for SAMSUNG S3C64XX SoC
+ ************************************************/
+
+#ifndef __S3C64XX_H__
+#define __S3C64XX_H__
+
+#if defined(CONFIG_SYNC_MODE) && defined(CONFIG_S3C6400)
+#error CONFIG_SYNC_MODE unavailable on S3C6400, please, fix your configuration!
+#endif
+
+#include <asm/types.h>
+
+/* UART (see manual chapter 11) */
+typedef struct {
+ volatile u32 ULCON;
+ volatile u32 UCON;
+ volatile u32 UFCON;
+ volatile u32 UMCON;
+ volatile u32 UTRSTAT;
+ volatile u32 UERSTAT;
+ volatile u32 UFSTAT;
+ volatile u32 UMSTAT;
+#ifdef __BIG_ENDIAN
+ volatile u8 res1[3];
+ volatile u8 UTXH;
+ volatile u8 res2[3];
+ volatile u8 URXH;
+#else /* Little Endian */
+ volatile u8 UTXH;
+ volatile u8 res1[3];
+ volatile u8 URXH;
+ volatile u8 res2[3];
+#endif
+ volatile u32 UBRDIV;
+#ifdef __BIG_ENDIAN
+ volatile u8 res3[2];
+ volatile u16 UDIVSLOT;
+#else
+ volatile u16 UDIVSLOT;
+ volatile u8 res3[2];
+#endif
+} s3c64xx_uart;
+
+/* PWM TIMER (see manual chapter 10) */
+typedef struct {
+ volatile u32 TCNTB;
+ volatile u32 TCMPB;
+ volatile u32 TCNTO;
+} s3c64xx_timer;
+
+typedef struct {
+ volatile u32 TCFG0;
+ volatile u32 TCFG1;
+ volatile u32 TCON;
+ s3c64xx_timer ch[4];
+ volatile u32 TCNTB4;
+ volatile u32 TCNTO4;
+} s3c64xx_timers;
+
+#endif /*__S3C64XX_H__*/
diff --git a/lib_arm/board.c b/lib_arm/board.c
index 6e3ef08..5ade882 100644
--- a/lib_arm/board.c
+++ b/lib_arm/board.c
@@ -430,9 +430,9 @@ void start_armboot (void)
/* Perform network card initialisation if necessary */
#ifdef CONFIG_DRIVER_TI_EMAC
-extern void dm644x_eth_set_mac_addr (const u_int8_t *addr);
+extern void davinci_eth_set_mac_addr (const u_int8_t *addr);
if (getenv ("ethaddr")) {
- dm644x_eth_set_mac_addr(gd->bd->bi_enetaddr);
+ davinci_eth_set_mac_addr(gd->bd->bi_enetaddr);
}
#endif
diff --git a/nand_spl/board/samsung/smdk6400/Makefile b/nand_spl/board/samsung/smdk6400/Makefile
new file mode 100644
index 0000000..ae9eb2a
--- /dev/null
+++ b/nand_spl/board/samsung/smdk6400/Makefile
@@ -0,0 +1,106 @@
+#
+# (C) Copyright 2006-2007
+# Stefan Roese, DENX Software Engineering, sr@denx.de.
+#
+# (C) Copyright 2008
+# Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+CONFIG_NAND_SPL = y
+
+include $(TOPDIR)/config.mk
+include $(TOPDIR)/nand_spl/board/$(BOARDDIR)/config.mk
+
+LDSCRIPT= $(TOPDIR)/nand_spl/board/$(BOARDDIR)/u-boot.lds
+LDFLAGS = -Bstatic -T $(LDSCRIPT) -Ttext $(TEXT_BASE) $(PLATFORM_LDFLAGS)
+AFLAGS += -DCONFIG_NAND_SPL
+CFLAGS += -DCONFIG_NAND_SPL
+
+SOBJS = start.o cpu_init.o lowlevel_init.o
+COBJS = nand_boot.o nand_ecc.o s3c64xx.o
+
+SRCS := $(addprefix $(obj),$(SOBJS:.o=.S) $(COBJS:.o=.c))
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+__OBJS := $(SOBJS) $(COBJS)
+LNDIR := $(OBJTREE)/nand_spl/board/$(BOARDDIR)
+
+nandobj := $(OBJTREE)/nand_spl/
+
+ALL = $(nandobj)u-boot-spl $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin
+
+all: $(obj).depend $(ALL)
+
+$(nandobj)u-boot-spl-16k.bin: $(nandobj)u-boot-spl
+ $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(PAD_TO) -O binary $< $@
+
+$(nandobj)u-boot-spl.bin: $(nandobj)u-boot-spl
+ $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@
+
+$(nandobj)u-boot-spl: $(OBJS)
+ cd $(LNDIR) && $(LD) $(LDFLAGS) $(__OBJS) \
+ -Map $(nandobj)u-boot-spl.map \
+ -o $(nandobj)u-boot-spl
+
+# create symbolic links for common files
+
+# from cpu directory
+$(obj)start.S:
+ @rm -f $@
+ @ln -s $(TOPDIR)/cpu/arm1176/start.S $@
+
+# from SoC directory
+$(obj)cpu_init.S:
+ @rm -f $@
+ @ln -s $(TOPDIR)/cpu/arm1176/s3c64xx/cpu_init.S $@
+
+# from board directory
+$(obj)lowlevel_init.S:
+ @rm -f $@
+ @ln -s $(TOPDIR)/board/samsung/smdk6400/lowlevel_init.S $@
+
+# from nand_spl directory
+$(obj)nand_boot.c:
+ @rm -f $@
+ @ln -s $(TOPDIR)/nand_spl/nand_boot.c $@
+
+# from drivers/mtd/nand directory
+$(obj)nand_ecc.c:
+ @rm -f $@
+ @ln -s $(TOPDIR)/drivers/mtd/nand/nand_ecc.c $@
+
+$(obj)s3c64xx.c:
+ @rm -f $@
+ @ln -s $(TOPDIR)/drivers/mtd/nand/s3c64xx.c $@
+
+#########################################################################
+
+$(obj)%.o: $(obj)%.S
+ $(CC) $(AFLAGS) -c -o $@ $<
+
+$(obj)%.o: $(obj)%.c
+ $(CC) $(CFLAGS) -c -o $@ $<
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/nand_spl/board/samsung/smdk6400/config.mk b/nand_spl/board/samsung/smdk6400/config.mk
new file mode 100644
index 0000000..4b16230
--- /dev/null
+++ b/nand_spl/board/samsung/smdk6400/config.mk
@@ -0,0 +1,40 @@
+#
+# (C) Copyright 2006
+# Stefan Roese, DENX Software Engineering, sr@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+#
+# Samsung S3C64xx Reference Platform (smdk6400) board
+
+# TEXT_BASE for SPL:
+#
+# On S3C64xx platforms the SPL is located in SRAM at 0.
+#
+# TEXT_BASE = 0
+
+include $(TOPDIR)/board/$(BOARDDIR)/config.mk
+
+# PAD_TO used to generate a 4kByte binary needed for the combined image
+# -> PAD_TO = TEXT_BASE + 4096
+PAD_TO := $(shell expr $$[$(TEXT_BASE) + 4096])
+
+ifeq ($(debug),1)
+PLATFORM_CPPFLAGS += -DDEBUG
+endif
diff --git a/nand_spl/board/samsung/smdk6400/u-boot.lds b/nand_spl/board/samsung/smdk6400/u-boot.lds
new file mode 100644
index 0000000..1bf022c
--- /dev/null
+++ b/nand_spl/board/samsung/smdk6400/u-boot.lds
@@ -0,0 +1,61 @@
+/*
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+ *
+ * (C) Copyright 2008
+ * Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+ . = 0x00000000;
+
+ . = ALIGN(4);
+ .text :
+ {
+ start.o (.text)
+ cpu_init.o (.text)
+ nand_boot.o (.text)
+
+ *(.text)
+ }
+
+ . = ALIGN(4);
+ .rodata : { *(.rodata) }
+
+ . = ALIGN(4);
+ .data : { *(.data) }
+
+ . = ALIGN(4);
+ .got : { *(.got) }
+
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ __bss_start = .;
+ .bss : { *(.bss) }
+ _end = .;
+}
diff --git a/net/eth.c b/net/eth.c
index 4e508a0..85fa0da 100644
--- a/net/eth.c
+++ b/net/eth.c
@@ -576,7 +576,7 @@ extern int at91rm9200_miiphy_initialize(bd_t *bis);
extern int emac4xx_miiphy_initialize(bd_t *bis);
extern int mcf52x2_miiphy_initialize(bd_t *bis);
extern int ns7520_miiphy_initialize(bd_t *bis);
-extern int dm644x_eth_miiphy_initialize(bd_t *bis);
+extern int davinci_eth_miiphy_initialize(bd_t *bis);
int eth_initialize(bd_t *bis)
@@ -599,7 +599,7 @@ int eth_initialize(bd_t *bis)
ns7520_miiphy_initialize(bis);
#endif
#if defined(CONFIG_DRIVER_TI_EMAC)
- dm644x_eth_miiphy_initialize(bis);
+ davinci_eth_miiphy_initialize(bis);
#endif
return 0;
}