summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorWolfgang Denk <wd@pollux.denx.de>2005-08-10 15:14:32 +0200
committerWolfgang Denk <wd@pollux.denx.de>2005-08-10 15:14:32 +0200
commit8f79e4c2da54cea11bb576870059fc1ba8847ccb (patch)
treef0239cabab579b2e9ed45fca40d33c3041363792
parenteece159cddc1f64a744c82c4b9582ced45b5c45c (diff)
downloadu-boot-imx-8f79e4c2da54cea11bb576870059fc1ba8847ccb.zip
u-boot-imx-8f79e4c2da54cea11bb576870059fc1ba8847ccb.tar.gz
u-boot-imx-8f79e4c2da54cea11bb576870059fc1ba8847ccb.tar.bz2
Add configuration for IFM AEV FIFO board.
Minor coding style cleanup.
-rw-r--r--CHANGELOG5
-rw-r--r--Makefile3
-rw-r--r--board/tqm5200/tqm5200.c4
-rw-r--r--common/cmd_ace.c2
-rw-r--r--common/cmd_flash.c2
-rw-r--r--common/cmd_fpga.c8
-rw-r--r--common/cmd_jffs2.c58
-rw-r--r--fs/jffs2/jffs2_1pass.c6
-rw-r--r--include/configs/NETTA.h2
-rw-r--r--include/configs/aev.h401
-rw-r--r--include/linux/list.h34
11 files changed, 469 insertions, 56 deletions
diff --git a/CHANGELOG b/CHANGELOG
index beff987..a752e01 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,11 @@
Changes for U-Boot 1.1.3:
======================================================================
+* Add configuration for IFM AEV FIFO board.
+ Minor coding style cleanup.
+
+* Add configuration for IFM SPI eval board
+
* Fix CompactFlash problem on HMI1001 board
* Make new "mtdparts" code build with older compilers
diff --git a/Makefile b/Makefile
index fa7251b..ea476e3 100644
--- a/Makefile
+++ b/Makefile
@@ -359,6 +359,9 @@ spieval_config: unconfig
echo "... with automatic CS configuration"
@./mkconfig -a spieval ppc mpc5xxx tqm5200
+aev_config: unconfig
+ @./mkconfig -a aev ppc mpc5xxx tqm5200
+
#########################################################################
## MPC8xx Systems
#########################################################################
diff --git a/board/tqm5200/tqm5200.c b/board/tqm5200/tqm5200.c
index 43d89b0..90275ec 100644
--- a/board/tqm5200/tqm5200.c
+++ b/board/tqm5200/tqm5200.c
@@ -250,6 +250,10 @@ long int initdram (int board_type)
int checkboard (void)
{
+#if defined (CONFIG_AEVFIFO)
+ puts ("Board: AEVFIFO\n");
+ return 0;
+#endif
#if defined (CONFIG_TQM5200_AA)
puts ("Board: TQM5200-AA (TQ-Components GmbH)\n");
#elif defined (CONFIG_TQM5200_AB)
diff --git a/common/cmd_ace.c b/common/cmd_ace.c
index 54fb918..fb4d358 100644
--- a/common/cmd_ace.c
+++ b/common/cmd_ace.c
@@ -31,7 +31,7 @@
* available to cmd_fat.c:get_dev and filling in a block device
* description that has all the bits needed for FAT support to
* read sectors.
- *
+ *
* According to Xilinx technical support, before accessing the
* SystemACE CF you need to set the following control bits:
* FORCECFGMODE : 1
diff --git a/common/cmd_flash.c b/common/cmd_flash.c
index 5ad4226..d5be30c 100644
--- a/common/cmd_flash.c
+++ b/common/cmd_flash.c
@@ -534,7 +534,7 @@ int do_protect (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
return rcode;
}
-
+
#if (CONFIG_COMMANDS & CFG_CMD_JFFS2) && defined(CONFIG_JFFS2_CMDLINE)
/* protect on/off <part-id> */
if ((argc == 3) && (id_parse(argv[2], NULL, &dev_type, &dev_num) == 0)) {
diff --git a/common/cmd_fpga.c b/common/cmd_fpga.c
index 0c0643c..c4b7392 100644
--- a/common/cmd_fpga.c
+++ b/common/cmd_fpga.c
@@ -137,9 +137,9 @@ int fpga_loadbitstream(unsigned long dev, char* fpgadata, size_t size)
__FUNCTION__);
return FPGA_FAIL;
}
- swapsize = ((unsigned int) *dataptr <<24) +
- ((unsigned int) *(dataptr+1) <<16) +
- ((unsigned int) *(dataptr+2) <<8 ) +
+ swapsize = ((unsigned int) *dataptr <<24) +
+ ((unsigned int) *(dataptr+1) <<16) +
+ ((unsigned int) *(dataptr+2) <<8 ) +
((unsigned int) *(dataptr+3) ) ;
dataptr+=4;
printf(" bytes in bitstream = %d\n", swapsize);
@@ -217,7 +217,7 @@ int do_fpga (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
PRINTF ("%s: device = %d\n", __FUNCTION__, dev);
/* FIXME - this is a really weak test */
if ((argc == 3) && (dev > fpga_count ())) { /* must be buffer ptr */
- PRINTF ("%s: Assuming buffer pointer in arg 3\n",
+ PRINTF ("%s: Assuming buffer pointer in arg 3\n",
__FUNCTION__);
fpga_data = (void *) dev;
PRINTF ("%s: fpga_data = 0x%x\n",
diff --git a/common/cmd_jffs2.c b/common/cmd_jffs2.c
index 7f5ebf9..16f5b7a 100644
--- a/common/cmd_jffs2.c
+++ b/common/cmd_jffs2.c
@@ -45,7 +45,7 @@
* partition := <part-id>
* <part-id> := <dev-id>,part_num
*
- *
+ *
* 'mtdids' - linux kernel mtd device id <-> u-boot device id mapping
*
* mtdids=<idmap>[,<idmap>,...]
@@ -403,7 +403,7 @@ static int part_del(struct mtd_device *dev, struct part_info *part)
return device_del(dev);
/* otherwise just delete this partition */
-
+
if (dev == current_dev) {
/* we are modyfing partitions for the current device,
* update current */
@@ -416,7 +416,7 @@ static int part_del(struct mtd_device *dev, struct part_info *part)
current_partnum = 0;
current_save();
} else if (part->offset <= curr_pi->offset) {
- current_partnum--;
+ current_partnum--;
current_save();
}
}
@@ -471,7 +471,7 @@ static int part_sort_add(struct mtd_device *dev, struct part_info *part)
list_add(&part->link, &dev->parts);
return 0;
}
-
+
new_pi = list_entry(&part->link, struct part_info, link);
/* get current partition info if we are updating current device */
@@ -492,7 +492,7 @@ static int part_sort_add(struct mtd_device *dev, struct part_info *part)
if (new_pi->offset <= pi->offset) {
list_add_tail(&part->link, entry);
-
+
if (curr_pi && (pi->offset <= curr_pi->offset)) {
/* we are modyfing partitions for the current
* device, update current */
@@ -516,7 +516,7 @@ static int part_sort_add(struct mtd_device *dev, struct part_info *part)
*/
static int part_add(struct mtd_device *dev, struct part_info *part)
{
- /* verify alignment and size */
+ /* verify alignment and size */
if (part_validate(dev->id, part) != 0)
return 1;
@@ -565,14 +565,14 @@ static int part_parse(const char *const partdef, const char **ret, struct part_i
}
}
- /* check for offset */
+ /* check for offset */
offset = OFFSET_NOT_SPECIFIED;
if (*p == '@') {
p++;
offset = memsize_parse(p, &p);
}
- /* now look for the name */
+ /* now look for the name */
if (*p == '(') {
name = ++p;
if ((p = strchr(name, ')')) == NULL) {
@@ -591,7 +591,7 @@ static int part_parse(const char *const partdef, const char **ret, struct part_i
name = NULL;
}
- /* test for options */
+ /* test for options */
mask_flags = 0;
if (strncmp(p, "ro", 2) == 0) {
mask_flags |= MTD_WRITEABLE;
@@ -823,8 +823,8 @@ static int device_parse(const char *const mtd_dev, const char **ret, struct mtd_
printf("invalid mtd device '%.*s'\n", mtd_id_len - 1, mtd_id);
return 1;
}
-
- DEBUGF("dev type = %d (%s), dev num = %d, mtd-id = %s\n",
+
+ DEBUGF("dev type = %d (%s), dev num = %d, mtd-id = %s\n",
id->type, MTD_DEV_TYPE(id->type),
id->num, id->mtd_id);
pend = strchr(p, ';');
@@ -836,7 +836,7 @@ static int device_parse(const char *const mtd_dev, const char **ret, struct mtd_
offset = 0;
if ((dev = device_find(id->type, id->num)) != NULL) {
- /* if device already exists start at the end of the last partition */
+ /* if device already exists start at the end of the last partition */
part = list_entry(dev->parts.prev, struct part_info, link);
offset = part->offset + part->size;
}
@@ -852,7 +852,7 @@ static int device_parse(const char *const mtd_dev, const char **ret, struct mtd_
else
offset = part->offset;
- /* verify alignment and size */
+ /* verify alignment and size */
if (part_validate(id, part) != 0)
break;
@@ -885,7 +885,7 @@ static int device_parse(const char *const mtd_dev, const char **ret, struct mtd_
} else {
printf("unexpected character '%c' at the end of device\n", *p);
*ret = NULL;
- return 1;
+ return 1;
}
}
@@ -939,7 +939,7 @@ static struct mtdids* id_find(u8 type, u8 num)
{
struct list_head *entry;
struct mtdids *id;
-
+
list_for_each(entry, &mtdids) {
id = list_entry(entry, struct mtdids, link);
@@ -951,7 +951,7 @@ static struct mtdids* id_find(u8 type, u8 num)
}
/**
- * Search global mtdids list and find id of a requested mtd_id.
+ * Search global mtdids list and find id of a requested mtd_id.
*
* Note: first argument is not null terminated.
*
@@ -963,7 +963,7 @@ static struct mtdids* id_find_by_mtd_id(const char *mtd_id, unsigned int mtd_id_
{
struct list_head *entry;
struct mtdids *id;
-
+
DEBUGF("--- id_find_by_mtd_id: '%.*s' (len = %d)\n",
mtd_id_len, mtd_id, mtd_id_len);
@@ -1045,13 +1045,13 @@ static int generate_mtdparts(char *buf, u32 buflen)
buf[0] = '\0';
return 0;
}
-
+
sprintf(p, "mtdparts=");
p += 9;
list_for_each(dentry, &devices) {
dev = list_entry(dentry, struct mtd_device, link);
-
+
/* copy mtd_id */
len = strlen(dev->id->mtd_id) + 1;
if (len > maxlen)
@@ -1078,8 +1078,8 @@ static int generate_mtdparts(char *buf, u32 buflen)
memcpy(p, tmpbuf, len);
p += len;
maxlen -= len;
-
-
+
+
/* add offset only when there is a gap between
* partitions */
if ((!prev_part && (offset != 0)) ||
@@ -1107,7 +1107,7 @@ static int generate_mtdparts(char *buf, u32 buflen)
*(p++) = ')';
maxlen -= len;
}
-
+
/* ro mask flag */
if (part->mask_flags && MTD_WRITEABLE) {
len = 2;
@@ -1188,7 +1188,7 @@ static void list_partitions(void)
MTD_DEV_TYPE(dev->id->type), dev->id->num,
dev->id->mtd_id, dev->num_parts);
printf(" #: name\t\t\tsize\t\toffset\t\tmask_flags\n");
-
+
/* list partitions for given device */
part_num = 0;
list_for_each(pentry, &dev->parts) {
@@ -1256,7 +1256,7 @@ int find_dev_and_part(const char *id, struct mtd_device **dev,
printf("unexpected trailing character '%c'\n", *p);
return 1;
}
-
+
if ((*dev = device_find(type, dnum)) == NULL) {
printf("no such device %s%d\n", MTD_DEV_TYPE(type), dnum);
return 1;
@@ -1328,7 +1328,7 @@ static int parse_mtdparts(const char *const mtdparts)
/* re-read 'mtdparts' variable, devices_init may be updating env */
p = getenv("mtdparts");
-
+
if (strncmp(p, "mtdparts=", 9) != 0) {
printf("mtdparts variable doesn't start with 'mtdparts='\n");
return err;
@@ -1615,7 +1615,7 @@ int mtdparts_init(void)
/**
* Parse and initialize global mtdids mapping and create global
- * device/partition list.
+ * device/partition list.
*
* @return 0 on success, 1 otherwise
*/
@@ -1870,7 +1870,7 @@ int do_jffs2_fsinfo(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
/* make sure we are in sync with env variables */
if (mtdparts_init() !=0)
return 1;
-
+
if ((part = jffs2_part_info(current_dev, current_partnum))){
/* check partition type for cramfs */
@@ -1968,7 +1968,7 @@ int do_jffs2_mtdparts(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
list_partitions();
return 0;
}
-
+
/* mtdparts add <mtd-dev> <size>[@<offset>] <name> [ro] */
if (((argc == 5) || (argc == 6)) && (strcmp(argv[1], "add") == 0)) {
#define PART_ADD_DESC_MAXLEN 64
@@ -1998,7 +1998,7 @@ int do_jffs2_mtdparts(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
return 1;
}
sprintf(tmpbuf, "%s:%s(%s)%s",
- id->mtd_id, argv[3], argv[4], argv[5] ? argv[5] : "");
+ id->mtd_id, argv[3], argv[4], argv[5] ? argv[5] : "");
DEBUGF("add tmpbuf: %s\n", tmpbuf);
if ((device_parse(tmpbuf, NULL, &dev) != 0) || (!dev))
diff --git a/fs/jffs2/jffs2_1pass.c b/fs/jffs2/jffs2_1pass.c
index 5180107..667ae15 100644
--- a/fs/jffs2/jffs2_1pass.c
+++ b/fs/jffs2/jffs2_1pass.c
@@ -278,13 +278,13 @@ static inline void *get_node_mem_nor(u32 off)
/*
- * Generic jffs2 raw memory and node read routines.
+ * Generic jffs2 raw memory and node read routines.
*
*/
static inline void *get_fl_mem(u32 off, u32 size, void *ext_buf)
{
struct mtdids *id = current_part->dev->id;
-
+
#if (CONFIG_COMMANDS & CFG_CMD_FLASH)
if (id->type == MTD_DEV_TYPE_NOR)
return get_fl_mem_nor(off);
@@ -302,7 +302,7 @@ static inline void *get_fl_mem(u32 off, u32 size, void *ext_buf)
static inline void *get_node_mem(u32 off)
{
struct mtdids *id = current_part->dev->id;
-
+
#if (CONFIG_COMMANDS & CFG_CMD_FLASH)
if (id->type == MTD_DEV_TYPE_NOR)
return get_node_mem_nor(off);
diff --git a/include/configs/NETTA.h b/include/configs/NETTA.h
index 3573b37..1bcd88d 100644
--- a/include/configs/NETTA.h
+++ b/include/configs/NETTA.h
@@ -694,7 +694,7 @@
/* No command line, one static partition, whole device */
#undef CONFIG_JFFS2_CMDLINE
#define CONFIG_JFFS2_DEV "nand0"
-#define CONFIG_JFFS2_PART_SIZE 0x00100000
+#define CONFIG_JFFS2_PART_SIZE 0x00100000
#define CONFIG_JFFS2_PART_OFFSET 0x00200000
/* mtdparts command line support */
diff --git a/include/configs/aev.h b/include/configs/aev.h
new file mode 100644
index 0000000..ca6e52b
--- /dev/null
+++ b/include/configs/aev.h
@@ -0,0 +1,401 @@
+/*
+ * (C) Copyright 2003-2005
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2004-2005
+ * Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+
+#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */
+#define CONFIG_MPC5200 1 /* (more precisely an MPC5200 CPU) */
+#define CONFIG_TQM5200 1 /* ... on TQM5200 module */
+#undef CONFIG_TQM5200_REV100 /* define for revision 100 modules */
+#define CONFIG_STK52XX 1 /* ... on a STK52XX base board */
+#define CONFIG_STK52XX_REV100 1 /* define for revision 100 baseboards */
+#define CONFIG_AEVFIFO 1
+#define CFG_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */
+
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
+/*
+ * Serial console configuration
+ */
+#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */
+#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */
+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
+
+/*
+ * PCI Mapping:
+ * 0x40000000 - 0x4fffffff - PCI Memory
+ * 0x50000000 - 0x50ffffff - PCI IO Space
+ */
+#ifdef CONFIG_AEVFIFO
+#define CONFIG_PCI 1
+#define CONFIG_PCI_PNP 1
+/* #define CONFIG_PCI_SCAN_SHOW 1 */
+
+#define CONFIG_PCI_MEM_BUS 0x40000000
+#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS
+#define CONFIG_PCI_MEM_SIZE 0x10000000
+
+#define CONFIG_PCI_IO_BUS 0x50000000
+#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS
+#define CONFIG_PCI_IO_SIZE 0x01000000
+
+#define CONFIG_NET_MULTI 1
+#define CONFIG_EEPRO100 1
+#define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
+#define CONFIG_NS8382X 1
+#endif /* CONFIG_AEVFIFO */
+
+/* Partitions */
+#define CONFIG_MAC_PARTITION
+#define CONFIG_DOS_PARTITION
+#define CONFIG_ISO_PARTITION
+
+/* POST support */
+#define CONFIG_POST (CFG_POST_MEMORY | \
+ CFG_POST_CPU | \
+ CFG_POST_I2C)
+
+#ifdef CONFIG_POST
+#define CFG_CMD_POST_DIAG CFG_CMD_DIAG
+/* preserve space for the post_word at end of on-chip SRAM */
+#define MPC5XXX_SRAM_POST_SIZE MPC5XXX_SRAM_SIZE-4
+#else
+#define CFG_CMD_POST_DIAG 0
+#endif
+
+/*
+ * Supported commands
+ */
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
+ ADD_BMP_CMD | \
+ CFG_CMD_PCI | \
+ CFG_CMD_ASKENV | \
+ CFG_CMD_DATE | \
+ CFG_CMD_DHCP | \
+ CFG_CMD_ECHO | \
+ CFG_CMD_EEPROM | \
+ CFG_CMD_I2C | \
+ CFG_CMD_MII | \
+ CFG_CMD_NFS | \
+ CFG_CMD_PING | \
+ CFG_CMD_POST_DIAG | \
+ CFG_CMD_REGINFO | \
+ CFG_CMD_SNTP )
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+#define CONFIG_TIMESTAMP /* display image timestamps */
+
+#if (TEXT_BASE == 0xFC000000) /* Boot low */
+# define CFG_LOWBOOT 1
+#endif
+
+/*
+ * Autobooting
+ */
+#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
+
+#define CONFIG_PREBOOT "echo;" \
+ "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+ "echo"
+
+#undef CONFIG_BOOTARGS
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "netdev=eth0\0" \
+ "rootpath=/opt/eldk/ppc_6xx\0" \
+ "ramargs=setenv bootargs root=/dev/ram rw\0" \
+ "nfsargs=setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=$(serverip):$(rootpath) " \
+ "console=ttyS0,$(baudrate)\0" \
+ "addip=setenv bootargs $(bootargs) " \
+ "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)" \
+ ":$(hostname):$(netdev):off panic=1\0" \
+ "flash_self=run ramargs addip;" \
+ "bootm $(kernel_addr) $(ramdisk_addr)\0" \
+ "flash_nfs=run nfsargs addip;" \
+ "bootm $(kernel_addr)\0" \
+ "net_nfs=tftp 200000 $(bootfile);run nfsargs addip;bootm\0" \
+ "bootfile=/tftpboot/tqm5200/uImage\0" \
+ "load=tftp 200000 $(u-boot)\0" \
+ "u-boot=/tftpboot/tqm5200/u-boot.bin\0" \
+ "update=protect off FC000000 FC05FFFF;" \
+ "erase FC000000 FC05FFFF;" \
+ "cp.b 200000 FC000000 $(filesize);" \
+ "protect on FC000000 FC05FFFF\0" \
+ ""
+
+#define CONFIG_BOOTCOMMAND "run net_nfs"
+
+/*
+ * IPB Bus clocking configuration.
+ */
+#define CFG_IPBSPEED_133 /* define for 133MHz speed */
+
+#if defined(CFG_IPBSPEED_133)
+/*
+ * PCI Bus clocking configuration
+ *
+ * Actually a PCI Clock of 66 MHz is only set (in cpu_init.c) if
+ * CFG_IPBSPEED_133 is defined. This is because a PCI Clock of 66 MHz yet hasn't
+ * been tested with a IPB Bus Clock of 66 MHz.
+ */
+#define CFG_PCISPEED_66 /* define for 66MHz speed */
+#endif
+
+/*
+ * I2C configuration
+ */
+#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
+#ifdef CONFIG_TQM5200_REV100
+#define CFG_I2C_MODULE 1 /* Select I2C module #1 for rev. 100 board */
+#else
+#define CFG_I2C_MODULE 2 /* Select I2C module #2 for all other revs */
+#endif
+
+/*
+ * I2C clock frequency
+ *
+ * Please notice, that the resulting clock frequency could differ from the
+ * configured value. This is because the I2C clock is derived from system
+ * clock over a frequency divider with only a few divider values. U-boot
+ * calculates the best approximation for CFG_I2C_SPEED. However the calculated
+ * approximation allways lies below the configured value, never above.
+ */
+#define CFG_I2C_SPEED 100000 /* 100 kHz */
+#define CFG_I2C_SLAVE 0x7F
+
+/*
+ * EEPROM configuration for onboard EEPROM M24C32 (M24C64 should work
+ * also). For other EEPROMs configuration should be verified. On Mini-FAP the
+ * EEPROM (24C64) is on the same I2C address (but on other I2C bus), so the
+ * same configuration could be used.
+ */
+#define CFG_I2C_EEPROM_ADDR 0x50 /* 1010000x */
+#define CFG_I2C_EEPROM_ADDR_LEN 2
+#define CFG_EEPROM_PAGE_WRITE_BITS 5 /* =32 Bytes per write */
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 20
+
+/*
+ * Flash configuration
+ */
+#define CFG_FLASH_BASE TEXT_BASE /* 0xFC000000 */
+
+/* use CFI flash driver if no module variant is spezified */
+#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */
+#define CFG_FLASH_CFI_DRIVER 1 /* Use the common driver */
+#define CFG_FLASH_BANKS_LIST { CFG_BOOTCS_START }
+#define CFG_FLASH_EMPTY_INFO
+#define CFG_FLASH_SIZE 0x04000000 /* 64 MByte */
+#define CFG_MAX_FLASH_SECT 512 /* max num of sects on one chip */
+#undef CFG_FLASH_USE_BUFFER_WRITE /* not supported yet for AMD */
+
+#if !defined(CFG_LOWBOOT)
+#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x00760000 + 0x00800000)
+#else /* CFG_LOWBOOT */
+#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x00060000)
+#endif /* CFG_LOWBOOT */
+#define CFG_MAX_FLASH_BANKS 1 /* max num of flash banks
+ (= chip selects) */
+#define CFG_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */
+
+
+/*
+ * Environment settings
+ */
+#define CFG_ENV_IS_IN_FLASH 1
+#define CFG_ENV_SIZE 0x10000
+#define CFG_ENV_SECT_SIZE 0x20000
+#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR + CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
+
+/*
+ * Memory map
+ */
+#define CFG_MBAR 0xF0000000
+#define CFG_SDRAM_BASE 0x00000000
+#define CFG_DEFAULT_MBAR 0x80000000
+
+/* Use ON-Chip SRAM until RAM will be available */
+#define CFG_INIT_RAM_ADDR MPC5XXX_SRAM
+#ifdef CONFIG_POST
+/* preserve space for the post_word at end of on-chip SRAM */
+#define CFG_INIT_RAM_END MPC5XXX_SRAM_POST_SIZE
+#else
+#define CFG_INIT_RAM_END MPC5XXX_SRAM_SIZE
+#endif
+
+
+#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+
+#define CFG_MONITOR_BASE TEXT_BASE
+#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
+# define CFG_RAMBOOT 1
+#endif
+
+#define CFG_MONITOR_LEN (384 << 10) /* Reserve 384 kB for Monitor */
+#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+
+/*
+ * Ethernet configuration
+ */
+#define CONFIG_MPC5xxx_FEC 1
+/*
+ * Define CONFIG_FEC_10MBIT to force FEC at 10Mb
+ */
+/* #define CONFIG_FEC_10MBIT 1 */
+#define CONFIG_PHY_ADDR 0x00
+
+/*
+ * GPIO configuration
+ *
+ * use pin gpio_wkup_6 as second SDRAM chip select (mem_cs1):
+ * Bit 0 (mask: 0x80000000): 1
+ * use ALT CAN position: Bits 2-3 (mask: 0x30000000):
+ * 00 -> No Alternatives, CAN1/2 on PSC2 according to PSC2 setting.
+ * 01 -> CAN1 on I2C1, CAN2 on Tmr0/1.
+ * Use for REV200 STK52XX boards. Do not use with REV100 modules
+ * (because, there I2C1 is used as I2C bus)
+ * use PSC1 as UART: Bits 28-31 (mask: 0x00000007): 0100
+ * use PSC2 as CAN: Bits 25:27 (mask: 0x00000030)
+ * 000 -> All PSC2 pins are GIOPs
+ * 001 -> CAN1/2 on PSC2 pins
+ * Use for REV100 STK52xx boards
+ * use PSC6:
+ * on STK52xx:
+ * use as UART. Pins PSC6_0 to PSC6_3 are used.
+ * Bits 9:11 (mask: 0x00700000):
+ * 101 -> PSC6 : Extended POST test is not available
+ * on MINI-FAP and TQM5200_IB:
+ * use PSC6_0 to PSC6_3 as GPIO: Bits 9:11 (mask: 0x00700000):
+ * 000 -> PSC6 could not be used as UART, CODEC or IrDA
+ * GPIO on PSC6_3 is used in post_hotkeys_pressed() to enable extended POST
+ * tests.
+ */
+#define CFG_GPS_PORT_CONFIG 0x81500014
+
+/*
+ * RTC configuration
+ */
+#define CONFIG_RTC_MPC5200 1 /* use internal MPC5200 RTC */
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+/* Enable an alternate, more extensive memory test */
+#define CFG_ALT_MEMTEST
+
+#define CFG_MEMTEST_START 0x00100000 /* memtest works on */
+#define CFG_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */
+
+#define CFG_LOAD_ADDR 0x100000 /* default load address */
+
+#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+
+/*
+ * Enable loopw commando. This has only affect, if CFG_CMD_MEM is defined,
+ * which is normally part of the default commands (CFV_CMD_DFL)
+ */
+#define CONFIG_LOOPW
+
+/*
+ * Various low-level settings
+ */
+#if defined(CONFIG_MPC5200)
+#define CFG_HID0_INIT HID0_ICE | HID0_ICFI
+#define CFG_HID0_FINAL HID0_ICE
+#else
+#define CFG_HID0_INIT 0
+#define CFG_HID0_FINAL 0
+#endif
+
+#define CFG_BOOTCS_START CFG_FLASH_BASE
+#define CFG_BOOTCS_SIZE CFG_FLASH_SIZE
+#ifdef CFG_PCISPEED_66
+#define CFG_BOOTCS_CFG 0x0008DF30 /* for pci_clk = 66 MHz */
+#else
+#define CFG_BOOTCS_CFG 0x0004DF30 /* for pci_clk = 33 MHz */
+#endif
+#define CFG_CS0_START CFG_FLASH_BASE
+#define CFG_CS0_SIZE CFG_FLASH_SIZE
+
+/* automatic configuration of chip selects */
+#ifdef CONFIG_CS_AUTOCONF
+#define CONFIG_LAST_STAGE_INIT
+#endif
+
+/*
+ * SRAM - Do not map below 2 GB in address space, because this area is used
+ * for SDRAM autosizing.
+ */
+#define CFG_CS2_START 0xE5000000
+#define CFG_CS2_SIZE 0x80000 /* 512 kByte */
+#define CFG_CS2_CFG 0x0004D930
+
+/*
+ * Grafic controller - Do not map below 2 GB in address space, because this
+ * area is used for SDRAM autosizing.
+ */
+#define SM501_FB_BASE 0xE0000000
+#define CFG_CS1_START (SM501_FB_BASE)
+#define CFG_CS1_SIZE 0x4000000 /* 64 MByte */
+#define CFG_CS1_CFG 0x8F48FF70
+#define SM501_MMIO_BASE CFG_CS1_START + 0x03E00000
+
+#define CFG_CS_BURST 0x00000000
+#define CFG_CS_DEADCYCLE 0x33333311 /* 1 dead cycle for flash and SM501 */
+
+#define CFG_RESET_ADDRESS 0xff000000
+
+#endif /* __CONFIG_H */
diff --git a/include/linux/list.h b/include/linux/list.h
index d2a7d43..e6492f7 100644
--- a/include/linux/list.h
+++ b/include/linux/list.h
@@ -30,7 +30,7 @@ struct list_head {
} while (0)
/*
- * Insert a new entry between two known consecutive entries.
+ * Insert a new entry between two known consecutive entries.
*
* This is only for internal list manipulation where we know
* the prev/next entries already!
@@ -103,7 +103,7 @@ static inline void list_del(struct list_head *entry)
static inline void list_del_init(struct list_head *entry)
{
__list_del(entry->prev, entry->next);
- INIT_LIST_HEAD(entry);
+ INIT_LIST_HEAD(entry);
}
/**
@@ -113,8 +113,8 @@ static inline void list_del_init(struct list_head *entry)
*/
static inline void list_move(struct list_head *list, struct list_head *head)
{
- __list_del(list->prev, list->next);
- list_add(list, head);
+ __list_del(list->prev, list->next);
+ list_add(list, head);
}
/**
@@ -125,8 +125,8 @@ static inline void list_move(struct list_head *list, struct list_head *head)
static inline void list_move_tail(struct list_head *list,
struct list_head *head)
{
- __list_del(list->prev, list->next);
- list_add_tail(list, head);
+ __list_del(list->prev, list->next);
+ list_add_tail(list, head);
}
/**
@@ -195,7 +195,7 @@ static inline void list_splice_init(struct list_head *list,
*/
#define list_for_each(pos, head) \
for (pos = (head)->next, prefetch(pos->next); pos != (head); \
- pos = pos->next, prefetch(pos->next))
+ pos = pos->next, prefetch(pos->next))
/**
* list_for_each_prev - iterate over a list backwards
* @pos: the &struct list_head to use as a loop counter.
@@ -203,8 +203,8 @@ static inline void list_splice_init(struct list_head *list,
*/
#define list_for_each_prev(pos, head) \
for (pos = (head)->prev, prefetch(pos->prev); pos != (head); \
- pos = pos->prev, prefetch(pos->prev))
-
+ pos = pos->prev, prefetch(pos->prev))
+
/**
* list_for_each_safe - iterate over a list safe against removal of list entry
* @pos: the &struct list_head to use as a loop counter.
@@ -224,7 +224,7 @@ static inline void list_splice_init(struct list_head *list,
#define list_for_each_entry(pos, head, member) \
for (pos = list_entry((head)->next, typeof(*pos), member), \
prefetch(pos->member.next); \
- &pos->member != (head); \
+ &pos->member != (head); \
pos = list_entry(pos->member.next, typeof(*pos), member), \
prefetch(pos->member.next))
@@ -237,16 +237,16 @@ static inline void list_splice_init(struct list_head *list,
*/
#define list_for_each_entry_safe(pos, n, head, member) \
for (pos = list_entry((head)->next, typeof(*pos), member), \
- n = list_entry(pos->member.next, typeof(*pos), member); \
- &pos->member != (head); \
+ n = list_entry(pos->member.next, typeof(*pos), member); \
+ &pos->member != (head); \
pos = n, n = list_entry(n->member.next, typeof(*n), member))
/**
- * list_for_each_entry_continue - iterate over list of given type
- * continuing after existing point
- * @pos: the type * to use as a loop counter.
- * @head: the head for your list.
- * @member: the name of the list_struct within the struct.
+ * list_for_each_entry_continue - iterate over list of given type
+ * continuing after existing point
+ * @pos: the type * to use as a loop counter.
+ * @head: the head for your list.
+ * @member: the name of the list_struct within the struct.
*/
#define list_for_each_entry_continue(pos, head, member) \
for (pos = list_entry(pos->member.next, typeof(*pos), member), \