mpc83xx: Add the support for MPC8315ERDB board

The features list:
- Boot from NOR Flash
- DDR2 266MHz hardcoded configuration
- Local bus NOR Flash R/W operation
- I2C, UART, MII and RTC
- eTSEC0/1 support
- PCI host

Signed-off-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

10 files changed, 936 insertions, 1 deletions

diff --git a/CREDITS b/CREDITS
index 1130c9e..edf825c 100644
--- a/CREDITS
+++ b/CREDITS
@@ -305,7 +305,7 @@ W: http://www.li-pro.net
 
 N: Dave Liu
 E: daveliu@freescale.com
-D: Support for MPC832x, MPC8360, MPC837x
+D: Support for MPC8315, MPC832x, MPC8360, MPC837x
 W: www.freescale.com
 
 N: Raymond Lo
diff --git a/MAINTAINERS b/MAINTAINERS
index 40b2b51..528a536 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -232,6 +232,7 @@ The LEOX team <team@leox.org>
 
 Dave Liu <daveliu@freescale.com>
 
+	MPC8315ERDB		MPC8315
 	MPC832XEMDS		MPC832x
 	MPC8360EMDS		MPC8360
 	MPC837XEMDS		MPC837x
diff --git a/MAKEALL b/MAKEALL
index bec3541..efd4444 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -309,6 +309,7 @@ LIST_8260="		\
 LIST_83xx="		\
 	MPC8313ERDB_33	\
 	MPC8313ERDB_66	\
+	MPC8315ERDB	\
 	MPC8323ERDB	\
 	MPC832XEMDS	\
 	MPC832XEMDS_ATM	\
diff --git a/Makefile b/Makefile
index 8a888b9..8be0dfa 100644
--- a/Makefile
+++ b/Makefile
@@ -1861,6 +1861,9 @@ MPC8313ERDB_66_config: unconfig
 	fi ;
 	@$(MKCONFIG) -a MPC8313ERDB ppc mpc83xx mpc8313erdb freescale
 
+MPC8315ERDB_config: unconfig
+	@$(MKCONFIG) -a MPC8315ERDB ppc mpc83xx mpc8315erdb freescale
+
 MPC8323ERDB_config:	unconfig
 	@$(MKCONFIG) -a MPC8323ERDB ppc mpc83xx mpc8323erdb freescale
 
diff --git a/board/freescale/mpc8315erdb/Makefile b/board/freescale/mpc8315erdb/Makefile
new file mode 100644
index 0000000..a987e510
--- /dev/null
+++ b/board/freescale/mpc8315erdb/Makefile
@@ -0,0 +1,50 @@
+#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).a
+
+COBJS	:= $(BOARD).o sdram.o
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(obj).depend $(OBJS)
+	$(AR) crv $@ $(OBJS)
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/freescale/mpc8315erdb/config.mk b/board/freescale/mpc8315erdb/config.mk
new file mode 100644
index 0000000..f768264
--- /dev/null
+++ b/board/freescale/mpc8315erdb/config.mk
@@ -0,0 +1 @@
+TEXT_BASE = 0xFE000000
diff --git a/board/freescale/mpc8315erdb/mpc8315erdb.c b/board/freescale/mpc8315erdb/mpc8315erdb.c
new file mode 100644
index 0000000..7af36dd
--- /dev/null
+++ b/board/freescale/mpc8315erdb/mpc8315erdb.c
@@ -0,0 +1,132 @@
+/*
+ * Copyright (C) 2007 Freescale Semiconductor, Inc.
+ *
+ * Author: Scott Wood <scottwood@freescale.com>
+ *         Dave Liu <daveliu@freescale.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS for A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <i2c.h>
+#if defined(CONFIG_OF_LIBFDT)
+#include <libfdt.h>
+#endif
+#include <pci.h>
+#include <mpc83xx.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int board_early_init_f(void)
+{
+	volatile immap_t *im = (immap_t *)CFG_IMMR;
+
+	if (im->pmc.pmccr1 & PMCCR1_POWER_OFF)
+		gd->flags |= GD_FLG_SILENT;
+
+	return 0;
+}
+
+static u8 read_board_info(void)
+{
+	u8 val8;
+	i2c_set_bus_num(0);
+
+	if (i2c_read(CFG_I2C_PCF8574A_ADDR, 0, 0, &val8, 1) == 0)
+		return val8;
+	else
+		return 0;
+}
+
+int checkboard(void)
+{
+	static const char * const rev_str[] = {
+		"0.0",
+		"0.1",
+		"1.0",
+		"1.1",
+		"<unknown>",
+	};
+	u8 info;
+	int i;
+
+	info = read_board_info();
+	i = (!info) ? 4: info & 0x03;
+
+	printf("Board: Freescale MPC8315ERDB Rev %s\n", rev_str[i]);
+
+	return 0;
+}
+
+static struct pci_region pci_regions[] = {
+	{
+		bus_start: CFG_PCI_MEM_BASE,
+		phys_start: CFG_PCI_MEM_PHYS,
+		size: CFG_PCI_MEM_SIZE,
+		flags: PCI_REGION_MEM | PCI_REGION_PREFETCH
+	},
+	{
+		bus_start: CFG_PCI_MMIO_BASE,
+		phys_start: CFG_PCI_MMIO_PHYS,
+		size: CFG_PCI_MMIO_SIZE,
+		flags: PCI_REGION_MEM
+	},
+	{
+		bus_start: CFG_PCI_IO_BASE,
+		phys_start: CFG_PCI_IO_PHYS,
+		size: CFG_PCI_IO_SIZE,
+		flags: PCI_REGION_IO
+	}
+};
+
+void pci_init_board(void)
+{
+	volatile immap_t *immr = (volatile immap_t *)CFG_IMMR;
+	volatile clk83xx_t *clk = (volatile clk83xx_t *)&immr->clk;
+	volatile law83xx_t *pci_law = immr->sysconf.pcilaw;
+	struct pci_region *reg[] = { pci_regions };
+	int warmboot;
+
+	/* Enable all 3 PCI_CLK_OUTPUTs. */
+	clk->occr |= 0xe0000000;
+
+	/*
+	 * Configure PCI Local Access Windows
+	 */
+	pci_law[0].bar = CFG_PCI_MEM_PHYS & LAWBAR_BAR;
+	pci_law[0].ar = LBLAWAR_EN | LBLAWAR_512MB;
+
+	pci_law[1].bar = CFG_PCI_IO_PHYS & LAWBAR_BAR;
+	pci_law[1].ar = LBLAWAR_EN | LBLAWAR_1MB;
+
+	warmboot = gd->bd->bi_bootflags & BOOTFLAG_WARM;
+	warmboot |= immr->pmc.pmccr1 & PMCCR1_POWER_OFF;
+
+	mpc83xx_pci_init(1, reg, warmboot);
+}
+
+#if defined(CONFIG_OF_BOARD_SETUP)
+void ft_board_setup(void *blob, bd_t *bd)
+{
+	ft_cpu_setup(blob, bd);
+#ifdef CONFIG_PCI
+	ft_pci_setup(blob, bd);
+#endif
+}
+#endif
diff --git a/board/freescale/mpc8315erdb/sdram.c b/board/freescale/mpc8315erdb/sdram.c
new file mode 100644
index 0000000..f97e3c7
--- /dev/null
+++ b/board/freescale/mpc8315erdb/sdram.c
@@ -0,0 +1,120 @@
+/*
+ * Copyright (C) 2007 Freescale Semiconductor, Inc.
+ *
+ * Authors: Nick.Spence@freescale.com
+ *          Wilson.Lo@freescale.com
+ *          scottwood@freescale.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS for A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc83xx.h>
+#include <spd_sdram.h>
+
+#include <asm/bitops.h>
+#include <asm/io.h>
+
+#include <asm/processor.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static void resume_from_sleep(void)
+{
+	u32 magic = *(u32 *)0;
+
+	typedef void (*func_t)(void);
+	func_t resume = *(func_t *)4;
+
+	if (magic == 0xf5153ae5)
+		resume();
+
+	gd->flags &= ~GD_FLG_SILENT;
+	puts("\nResume from sleep failed: bad magic word\n");
+}
+
+/* Fixed sdram init -- doesn't use serial presence detect.
+ *
+ * This is useful for faster booting in configs where the RAM is unlikely
+ * to be changed, or for things like NAND booting where space is tight.
+ */
+static long fixed_sdram(void)
+{
+	volatile immap_t *im = (volatile immap_t *)CFG_IMMR;
+	u32 msize = CFG_DDR_SIZE * 1024 * 1024;
+	u32 msize_log2 = __ilog2(msize);
+
+	im->sysconf.ddrlaw[0].bar = CFG_DDR_SDRAM_BASE >> 12;
+	im->sysconf.ddrlaw[0].ar = LBLAWAR_EN | (msize_log2 - 1);
+	im->sysconf.ddrcdr = CFG_DDRCDR_VALUE;
+
+	/*
+	 * Erratum DDR3 requires a 50ms delay after clearing DDRCDR[DDR_cfg],
+	 * or the DDR2 controller may fail to initialize correctly.
+	 */
+	udelay(50000);
+
+	im->ddr.csbnds[0].csbnds = (msize - 1) >> 24;
+	im->ddr.cs_config[0] = CFG_DDR_CS0_CONFIG;
+
+	/* Currently we use only one CS, so disable the other bank. */
+	im->ddr.cs_config[1] = 0;
+
+	im->ddr.sdram_clk_cntl = CFG_DDR_SDRAM_CLK_CNTL;
+	im->ddr.timing_cfg_3 = CFG_DDR_TIMING_3;
+	im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1;
+	im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2;
+	im->ddr.timing_cfg_0 = CFG_DDR_TIMING_0;
+
+	if (im->pmc.pmccr1 & PMCCR1_POWER_OFF)
+		im->ddr.sdram_cfg = CFG_DDR_SDRAM_CFG | SDRAM_CFG_BI;
+	else
+		im->ddr.sdram_cfg = CFG_DDR_SDRAM_CFG;
+
+	im->ddr.sdram_cfg2 = CFG_DDR_SDRAM_CFG2;
+	im->ddr.sdram_mode = CFG_DDR_MODE;
+	im->ddr.sdram_mode2 = CFG_DDR_MODE2;
+
+	im->ddr.sdram_interval = CFG_DDR_INTERVAL;
+	sync();
+
+	/* enable DDR controller */
+	im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN;
+	sync();
+
+	return msize;
+}
+
+long int initdram(int board_type)
+{
+	volatile immap_t *im = (volatile immap_t *)CFG_IMMR;
+	u32 msize;
+
+	if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im)
+		return -1;
+
+	/* DDR SDRAM */
+	msize = fixed_sdram();
+
+	if (im->pmc.pmccr1 & PMCCR1_POWER_OFF)
+		resume_from_sleep();
+
+	/* return total bus SDRAM size(bytes)  -- DDR */
+	return msize;
+}
diff --git a/doc/README.mpc8315erdb b/doc/README.mpc8315erdb
new file mode 100644
index 0000000..c630cf8
--- /dev/null
+++ b/doc/README.mpc8315erdb
@@ -0,0 +1,80 @@
+Freescale MPC8315ERDB Board
+-----------------------------------------
+
+1.	Board Switches and Jumpers
+
+	S3 is used to set CFG_RESET_SOURCE.
+
+	To boot the image at 0xFE000000 in NOR flash, use these DIP
+	switche settings for S3 S4:
+
+	+------+	+------+
+	|      |	| **** |
+	| **** |	|      |
+	+------+ ON	+------+ ON
+	  4321		  4321
+	(where the '*' indicates the position of the tab of the switch.)
+
+2.	Memory Map
+	The memory map looks like this:
+
+	0x0000_0000	0x07ff_ffff	DDR		 128M
+	0x8000_0000	0x8fff_ffff	PCI MEM		 256M
+	0x9000_0000	0x9fff_ffff	PCI_MMIO	 256M
+	0xe000_0000	0xe00f_ffff	IMMR		 1M
+	0xe030_0000	0xe03f_ffff	PCI IO		 1M
+	0xe060_0000	0xe060_7fff	NAND FLASH (CS1) 32K
+	0xfe00_0000	0xfe7f_ffff	NOR FLASH (CS0)	 8M
+
+3.	Definitions
+
+3.1	Explanation of NEW definitions in:
+
+	include/configs/MPC8315ERDB.h
+
+	CONFIG_MPC83xx		MPC83xx family
+	CONFIG_MPC831x		MPC831x specific
+	CONFIG_MPC8315		MPC8315 specific
+	CONFIG_MPC8315ERDB	MPC8315ERDB board specific
+
+4.	Compilation
+
+	Assuming you're using BASH (or similar) as your shell:
+
+	export CROSS_COMPILE=your-cross-compiler-prefix-
+	make distclean
+	make MPC8315ERDB_config
+	make all
+
+5.	Downloading and Flashing Images
+
+5.1	Reflash U-boot Image using U-boot
+
+	tftp 40000 u-boot.bin
+	protect off all
+	erase fe000000 fe1fffff
+
+	cp.b 40000 fe000000 xxxx
+	protect on all
+
+	You have to supply the correct byte count with 'xxxx'
+	from the TFTP result log.
+
+5.2	Downloading and Booting Linux Kernel
+
+	Ensure that all networking-related environment variables are set
+	properly (including ipaddr, serverip, gatewayip (if needed),
+	netmask, ethaddr, eth1addr, rootpath (if using NFS root),
+	fdtfile, and bootfile).
+
+	Then, do one of the following, depending on whether you
+	want an NFS root or a ramdisk root:
+
+	=>run nfsboot
+	or
+	=>run ramboot
+
+6	Notes
+
+	Booting from NAND flash is not yet supported.
+	The console baudrate for MPC8315ERDB is 115200bps.
diff --git a/include/configs/MPC8315ERDB.h b/include/configs/MPC8315ERDB.h
new file mode 100644
index 0000000..ad2305c
--- /dev/null
+++ b/include/configs/MPC8315ERDB.h
@@ -0,0 +1,547 @@
+/*
+ * Copyright (C) 2007 Freescale Semiconductor, Inc.
+ *
+ * Dave Liu <daveliu@freescale.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#undef DEBUG
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_E300		1 /* E300 family */
+#define CONFIG_MPC83XX		1 /* MPC83xx family */
+#define CONFIG_MPC831X		1 /* MPC831x CPU family */
+#define CONFIG_MPC8315		1 /* MPC8315 CPU specific */
+#define CONFIG_MPC8315ERDB	1 /* MPC8315ERDB board specific */
+
+/*
+ * System Clock Setup
+ */
+#define CONFIG_83XX_CLKIN	66666667 /* in Hz */
+#define CONFIG_SYS_CLK_FREQ	CONFIG_83XX_CLKIN
+
+/*
+ * Hardware Reset Configuration Word
+ * if CLKIN is 66.66MHz, then
+ * CSB = 133MHz, CORE = 400MHz, DDRC = 266MHz, LBC = 133MHz
+ */
+#define CFG_HRCW_LOW (\
+	HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
+	HRCWL_DDR_TO_SCB_CLK_2X1 |\
+	HRCWL_SVCOD_DIV_2 |\
+	HRCWL_CSB_TO_CLKIN_2X1 |\
+	HRCWL_CORE_TO_CSB_3X1)
+#define CFG_HRCW_HIGH (\
+	HRCWH_PCI_HOST |\
+	HRCWH_PCI1_ARBITER_ENABLE |\
+	HRCWH_CORE_ENABLE |\
+	HRCWH_FROM_0X00000100 |\
+	HRCWH_BOOTSEQ_DISABLE |\
+	HRCWH_SW_WATCHDOG_DISABLE |\
+	HRCWH_ROM_LOC_LOCAL_16BIT |\
+	HRCWH_RL_EXT_LEGACY |\
+	HRCWH_TSEC1M_IN_RGMII |\
+	HRCWH_TSEC2M_IN_RGMII |\
+	HRCWH_BIG_ENDIAN |\
+	HRCWH_LALE_NORMAL)
+
+/*
+ * System IO Config
+ */
+#define CFG_SICRH		0x00000000
+#define CFG_SICRL		0x00000000 /* 3.3V, no delay */
+
+#define CONFIG_BOARD_EARLY_INIT_F /* call board_pre_init */
+
+/*
+ * IMMR new address
+ */
+#define CFG_IMMR		0xE0000000
+
+/*
+ * Arbiter Setup
+ */
+#define CFG_ACR_PIPE_DEP	3 /* Arbiter pipeline depth is 4 */
+#define CFG_ACR_RPTCNT		3 /* Arbiter repeat count is 4 */
+#define CFG_SPCR_TSECEP		3 /* eTSEC emergency priority is highest */
+
+/*
+ * DDR Setup
+ */
+#define CFG_DDR_BASE		0x00000000 /* DDR is system memory */
+#define CFG_SDRAM_BASE		CFG_DDR_BASE
+#define CFG_DDR_SDRAM_BASE	CFG_DDR_BASE
+#define CFG_DDR_SDRAM_CLK_CNTL	DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05
+#define CFG_DDRCDR_VALUE	( DDRCDR_EN \
+				| DDRCDR_PZ_LOZ \
+				| DDRCDR_NZ_LOZ \
+				| DDRCDR_ODT \
+				| DDRCDR_Q_DRN )
+				/* 0x7b880001 */
+/*
+ * Manually set up DDR parameters
+ * consist of two chips HY5PS12621BFP-C4 from HYNIX
+ */
+#define CFG_DDR_SIZE		128 /* MB */
+#define CFG_DDR_CS0_BNDS	0x00000007
+#define CFG_DDR_CS0_CONFIG	( CSCONFIG_EN \
+				| 0x00010000  /* ODT_WR to CSn */ \
+				| CSCONFIG_ROW_BIT_13 | CSCONFIG_COL_BIT_10 )
+				/* 0x80010102 */
+#define CFG_DDR_TIMING_3	0x00000000
+#define CFG_DDR_TIMING_0	( ( 0 << TIMING_CFG0_RWT_SHIFT ) \
+				| ( 0 << TIMING_CFG0_WRT_SHIFT ) \
+				| ( 0 << TIMING_CFG0_RRT_SHIFT ) \
+				| ( 0 << TIMING_CFG0_WWT_SHIFT ) \
+				| ( 2 << TIMING_CFG0_ACT_PD_EXIT_SHIFT ) \
+				| ( 2 << TIMING_CFG0_PRE_PD_EXIT_SHIFT ) \
+				| ( 8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT ) \
+				| ( 2 << TIMING_CFG0_MRS_CYC_SHIFT ) )
+				/* 0x00220802 */
+#define CFG_DDR_TIMING_1	( ( 3 << TIMING_CFG1_PRETOACT_SHIFT ) \
+				| ( 9 << TIMING_CFG1_ACTTOPRE_SHIFT ) \
+				| ( 3 << TIMING_CFG1_ACTTORW_SHIFT ) \
+				| ( 5 << TIMING_CFG1_CASLAT_SHIFT ) \
+				| ( 6 << TIMING_CFG1_REFREC_SHIFT ) \
+				| ( 2 << TIMING_CFG1_WRREC_SHIFT ) \
+				| ( 2 << TIMING_CFG1_ACTTOACT_SHIFT ) \
+				| ( 2 << TIMING_CFG1_WRTORD_SHIFT ) )
+				/* 0x39356222 */
+#define CFG_DDR_TIMING_2	( ( 1 << TIMING_CFG2_ADD_LAT_SHIFT ) \
+				| ( 4 << TIMING_CFG2_CPO_SHIFT ) \
+				| ( 2 << TIMING_CFG2_WR_LAT_DELAY_SHIFT ) \
+				| ( 2 << TIMING_CFG2_RD_TO_PRE_SHIFT ) \
+				| ( 2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT ) \
+				| ( 3 << TIMING_CFG2_CKE_PLS_SHIFT ) \
+				| ( 7 << TIMING_CFG2_FOUR_ACT_SHIFT) )
+				/* 0x121048c7 */
+#define CFG_DDR_INTERVAL	( ( 0x0360 << SDRAM_INTERVAL_REFINT_SHIFT ) \
+				| ( 0x0100 << SDRAM_INTERVAL_BSTOPRE_SHIFT ) )
+				/* 0x03600100 */
+#define CFG_DDR_SDRAM_CFG	( SDRAM_CFG_SREN \
+				| SDRAM_CFG_SDRAM_TYPE_DDR2 \
+				| SDRAM_CFG_32_BE )
+				/* 0x43080000 */
+#define CFG_DDR_SDRAM_CFG2	0x00401000 /* 1 posted refresh */
+#define CFG_DDR_MODE		( ( 0x0448 << SDRAM_MODE_ESD_SHIFT ) \
+				| ( 0x0232 << SDRAM_MODE_SD_SHIFT ) )
+				/* ODT 150ohm CL=3, AL=1 on SDRAM */
+#define CFG_DDR_MODE2		0x00000000
+
+/*
+ * Memory test
+ */
+#undef CFG_DRAM_TEST		/* memory test, takes time */
+#define CFG_MEMTEST_START	0x00040000 /* memtest region */
+#define CFG_MEMTEST_END		0x00140000
+
+/*
+ * The reserved memory
+ */
+#define CFG_MONITOR_BASE	TEXT_BASE /* start of monitor */
+
+#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
+#define CFG_RAMBOOT
+#else
+#undef CFG_RAMBOOT
+#endif
+
+#define CFG_MONITOR_LEN		(256 * 1024) /* Reserve 256 kB for Mon */
+#define CFG_MALLOC_LEN		(512 * 1024) /* Reserved for malloc */
+
+/*
+ * Initial RAM Base Address Setup
+ */
+#define CFG_INIT_RAM_LOCK	1
+#define CFG_INIT_RAM_ADDR	0xE6000000 /* Initial RAM address */
+#define CFG_INIT_RAM_END	0x1000 /* End of used area in RAM */
+#define CFG_GBL_DATA_SIZE	0x100 /* num bytes initial data */
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+
+/*
+ * Local Bus Configuration & Clock Setup
+ */
+#define CFG_LCRR		(LCRR_DBYP | LCRR_CLKDIV_2)
+#define CFG_LBC_LBCR		0x00040000
+
+/*
+ * FLASH on the Local Bus
+ */
+#define CFG_FLASH_CFI		/* use the Common Flash Interface */
+#define CFG_FLASH_CFI_DRIVER	/* use the CFI driver */
+#define CFG_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
+
+#define CFG_FLASH_BASE		0xFE000000 /* FLASH base address */
+#define CFG_FLASH_SIZE		8 /* FLASH size is 8M */
+
+#define CFG_LBLAWBAR0_PRELIM	CFG_FLASH_BASE /* Window base at flash base */
+#define CFG_LBLAWAR0_PRELIM	0x80000016 /* 8MB window size */
+
+#define CFG_BR0_PRELIM		( CFG_FLASH_BASE	/* Flash Base address */ \
+				| (2 << BR_PS_SHIFT)	/* 16 bit port size */ \
+				| BR_V )		/* valid */
+#define CFG_OR0_PRELIM		( (~(CFG_FLASH_SIZE - 1) << 20) \
+				| OR_UPM_XAM \
+				| OR_GPCM_CSNT \
+				| OR_GPCM_ACS_0b11 \
+				| OR_GPCM_XACS \
+				| OR_GPCM_SCY_15 \
+				| OR_GPCM_TRLX \
+				| OR_GPCM_EHTR \
+				| OR_GPCM_EAD )
+
+#define CFG_MAX_FLASH_BANKS	1 /* number of banks */
+#define CFG_MAX_FLASH_SECT	135 /* 127 64KB sectors and 8 8KB top sectors per device */
+
+#undef CFG_FLASH_CHECKSUM
+#define CFG_FLASH_ERASE_TOUT	60000 /* Flash Erase Timeout (ms) */
+#define CFG_FLASH_WRITE_TOUT	500 /* Flash Write Timeout (ms) */
+
+/*
+ * NAND Flash on the Local Bus
+ */
+#define CFG_NAND_BASE		0xE0600000	/* 0xE0600000 */
+#define CFG_MAX_NAND_DEVICE	1
+#define NAND_MAX_CHIPS		1
+#define CONFIG_MTD_NAND_VERIFY_WRITE
+
+#define CFG_BR1_PRELIM		( CFG_NAND_BASE \
+				| (2<<BR_DECC_SHIFT)	/* Use HW ECC */ \
+				| BR_PS_8		/* Port Size = 8 bit */ \
+				| BR_MS_FCM		/* MSEL = FCM */ \
+				| BR_V )		/* valid */
+#define CFG_OR1_PRELIM		( 0xFFFF8000		/* length 32K */ \
+				| OR_FCM_CSCT \
+				| OR_FCM_CST \
+				| OR_FCM_CHT \
+				| OR_FCM_SCY_1 \
+				| OR_FCM_TRLX \
+				| OR_FCM_EHTR )
+				/* 0xFFFF8396 */
+
+#define CFG_LBLAWBAR1_PRELIM	CFG_NAND_BASE
+#define CFG_LBLAWAR1_PRELIM	0x8000000E	/* 32KB  */
+
+/*
+ * Serial Port
+ */
+#define CONFIG_CONS_INDEX	1
+#undef CONFIG_SERIAL_SOFTWARE_FIFO
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+#define CFG_NS16550_REG_SIZE	1
+#define CFG_NS16550_CLK		get_bus_freq(0)
+
+#define CFG_BAUDRATE_TABLE  \
+	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
+
+#define CFG_NS16550_COM1	(CFG_IMMR+0x4500)
+#define CFG_NS16550_COM2	(CFG_IMMR+0x4600)
+
+/* Use the HUSH parser */
+#define CFG_HUSH_PARSER
+#ifdef CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2 "> "
+#endif
+
+/* Pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT	1
+#define CONFIG_OF_BOARD_SETUP	1
+#define CONFIG_OF_STDOUT_VIA_ALIAS	1
+
+/* I2C */
+#define CONFIG_HARD_I2C		/* I2C with hardware support */
+#define CONFIG_FSL_I2C
+#define CFG_I2C_SPEED		400000 /* I2C speed and slave address */
+#define CFG_I2C_SLAVE		0x7F
+#define CFG_I2C_NOPROBES	{0x51} /* Don't probe these addrs */
+#define CFG_I2C_OFFSET		0x3000
+#define CFG_I2C2_OFFSET		0x3100
+
+/*
+ * Board info - revision and where boot from
+ */
+#define CFG_I2C_PCF8574A_ADDR	0x39
+
+/*
+ * Config on-board RTC
+ */
+#define CONFIG_RTC_DS1337	/* ds1339 on board, use ds1337 rtc via i2c */
+#define CFG_I2C_RTC_ADDR	0x68 /* at address 0x68 */
+
+/*
+ * General PCI
+ * Addresses are mapped 1-1.
+ */
+#define CFG_PCI_MEM_BASE	0x80000000
+#define CFG_PCI_MEM_PHYS	CFG_PCI_MEM_BASE
+#define CFG_PCI_MEM_SIZE	0x10000000 /* 256M */
+#define CFG_PCI_MMIO_BASE	0x90000000
+#define CFG_PCI_MMIO_PHYS	CFG_PCI_MMIO_BASE
+#define CFG_PCI_MMIO_SIZE	0x10000000 /* 256M */
+#define CFG_PCI_IO_BASE		0xE0300000
+#define CFG_PCI_IO_PHYS		0xE0300000
+#define CFG_PCI_IO_SIZE		0x100000 /* 1M */
+
+#define CFG_PCI_SLV_MEM_LOCAL	CFG_SDRAM_BASE
+#define CFG_PCI_SLV_MEM_BUS	0x00000000
+#define CFG_PCI_SLV_MEM_SIZE	0x80000000
+
+#define CONFIG_PCI
+#define CONFIG_83XX_GENERIC_PCI	1 /* Use generic PCI setup */
+
+#define CONFIG_NET_MULTI
+#define CONFIG_PCI_PNP		/* do pci plug-and-play */
+
+#define CONFIG_EEPRO100
+#undef CONFIG_PCI_SCAN_SHOW	/* show pci devices on startup */
+#define CFG_PCI_SUBSYS_VENDORID 0x1957	/* Freescale */
+
+#ifndef CONFIG_NET_MULTI
+#define CONFIG_NET_MULTI	1
+#endif
+
+/*
+ * TSEC
+ */
+#define CONFIG_TSEC_ENET	/* TSEC ethernet support */
+#define CFG_TSEC1_OFFSET	0x24000
+#define CFG_TSEC1		(CFG_IMMR+CFG_TSEC1_OFFSET)
+#define CFG_TSEC2_OFFSET	0x25000
+#define CFG_TSEC2		(CFG_IMMR+CFG_TSEC2_OFFSET)
+
+/*
+ * TSEC ethernet configuration
+ */
+#define CONFIG_MII		1 /* MII PHY management */
+#define CONFIG_TSEC1		1
+#define CONFIG_TSEC1_NAME	"eTSEC0"
+#define CONFIG_TSEC2		1
+#define CONFIG_TSEC2_NAME	"eTSEC1"
+#define TSEC1_PHY_ADDR		0
+#define TSEC2_PHY_ADDR		1
+#define TSEC1_PHYIDX		0
+#define TSEC2_PHYIDX		0
+#define TSEC1_FLAGS		TSEC_GIGABIT
+#define TSEC2_FLAGS		TSEC_GIGABIT
+
+/* Options are: eTSEC[0-1] */
+#define CONFIG_ETHPRIME		"eTSEC1"
+
+/*
+ * Environment
+ */
+#ifndef CFG_RAMBOOT
+	#define CFG_ENV_IS_IN_FLASH	1
+	#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + CFG_MONITOR_LEN)
+	#define CFG_ENV_SECT_SIZE	0x10000 /* 64K(one sector) for env */
+	#define CFG_ENV_SIZE		0x2000
+#else
+	#define CFG_NO_FLASH		1	/* Flash is not usable now */
+	#define CFG_ENV_IS_NOWHERE	1	/* Store ENV in memory only */
+	#define CFG_ENV_ADDR		(CFG_MONITOR_BASE - 0x1000)
+	#define CFG_ENV_SIZE		0x2000
+#endif
+
+#define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
+#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_PCI
+
+#if defined(CFG_RAMBOOT)
+    #undef CONFIG_CMD_ENV
+    #undef CONFIG_CMD_LOADS
+#endif
+
+#define CONFIG_CMDLINE_EDITING	1	/* add command line history */
+
+#undef CONFIG_WATCHDOG		/* watchdog disabled */
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP		/* undef to save memory */
+#define CFG_LOAD_ADDR		0x2000000 /* default load address */
+#define CFG_PROMPT		"=> "	/* Monitor Command Prompt */
+
+#if defined(CONFIG_CMD_KGDB)
+	#define CFG_CBSIZE	1024 /* Console I/O Buffer Size */
+#else
+	#define CFG_CBSIZE	256 /* Console I/O Buffer Size */
+#endif
+
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS	16		/* max number of command args */
+#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size */
+#define CFG_HZ		1000		/* decrementer freq: 1ms ticks */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ		(8 << 20) /* Initial Memory map for Linux */
+
+/*
+ * Core HID Setup
+ */
+#define CFG_HID0_INIT		0x000000000
+#define CFG_HID0_FINAL		(HID0_ENABLE_MACHINE_CHECK | \
+				 HID0_ENABLE_DYNAMIC_POWER_MANAGMENT)
+#define CFG_HID2		HID2_HBE
+
+/*
+ * MMU Setup
+ */
+
+/* DDR: cache cacheable */
+#define CFG_IBAT0L	(CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT0U	(CFG_SDRAM_BASE | BATU_BL_128M | BATU_VS | BATU_VP)
+#define CFG_DBAT0L	CFG_IBAT0L
+#define CFG_DBAT0U	CFG_IBAT0U
+
+/* IMMRBAR, PCI IO and NAND: cache-inhibit and guarded */
+#define CFG_IBAT1L	(CFG_IMMR | BATL_PP_10 | \
+			BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_IBAT1U	(CFG_IMMR | BATU_BL_8M | BATU_VS | BATU_VP)
+#define CFG_DBAT1L	CFG_IBAT1L
+#define CFG_DBAT1U	CFG_IBAT1U
+
+/* FLASH: icache cacheable, but dcache-inhibit and guarded */
+#define CFG_IBAT2L	(CFG_FLASH_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT2U	(CFG_FLASH_BASE | BATU_BL_8M | BATU_VS | BATU_VP)
+#define CFG_DBAT2L	(CFG_FLASH_BASE | BATL_PP_10 | \
+			BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_DBAT2U	CFG_IBAT2U
+
+/* Stack in dcache: cacheable, no memory coherence */
+#define CFG_IBAT3L	(CFG_INIT_RAM_ADDR | BATL_PP_10)
+#define CFG_IBAT3U	(CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
+#define CFG_DBAT3L	CFG_IBAT3L
+#define CFG_DBAT3U	CFG_IBAT3U
+
+/* PCI MEM space: cacheable */
+#define CFG_IBAT4L	(CFG_PCI_MEM_PHYS | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT4U	(CFG_PCI_MEM_PHYS | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CFG_DBAT4L	CFG_IBAT4L
+#define CFG_DBAT4U	CFG_IBAT4U
+
+/* PCI MMIO space: cache-inhibit and guarded */
+#define CFG_IBAT5L	(CFG_PCI_MMIO_PHYS | BATL_PP_10 | \
+			BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_IBAT5U	(CFG_PCI_MMIO_PHYS | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CFG_DBAT5L	CFG_IBAT5L
+#define CFG_DBAT5U	CFG_IBAT5U
+
+#define CFG_IBAT6L	0
+#define CFG_IBAT6U	0
+#define CFG_DBAT6L	CFG_IBAT6L
+#define CFG_DBAT6U	CFG_IBAT6U
+
+#define CFG_IBAT7L	0
+#define CFG_IBAT7U	0
+#define CFG_DBAT7L	CFG_IBAT7L
+#define CFG_DBAT7U	CFG_IBAT7U
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD	0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM	0x02 /* Software reboot */
+
+#if defined(CONFIG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
+#endif
+
+/*
+ * Environment Configuration
+ */
+
+#define CONFIG_ENV_OVERWRITE
+
+#if defined(CONFIG_TSEC_ENET)
+#define CONFIG_HAS_ETH0
+#define CONFIG_ETHADDR		04:00:00:00:00:0A
+#define CONFIG_HAS_ETH1
+#define CONFIG_ETH1ADDR		04:00:00:00:00:0B
+#endif
+
+#define CONFIG_BAUDRATE 115200
+
+#define CONFIG_LOADADDR 200000	/* default location for tftp and bootm */
+
+#define CONFIG_BOOTDELAY 6	/* -1 disables auto-boot */
+#undef CONFIG_BOOTARGS		/* the boot command will set bootargs */
+
+#define CONFIG_EXTRA_ENV_SETTINGS					\
+   "netdev=eth0\0"							\
+   "consoledev=ttyS0\0"							\
+   "ramdiskaddr=1000000\0"						\
+   "ramdiskfile=ramfs.83xx\0"						\
+   "fdtaddr=400000\0"							\
+   "fdtfile=mpc8315erdb.dtb\0"						\
+   ""
+
+#define CONFIG_NFSBOOTCOMMAND						\
+   "setenv bootargs root=/dev/nfs rw "					\
+      "nfsroot=$serverip:$rootpath "					\
+      "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
+      "console=$consoledev,$baudrate $othbootargs;"			\
+   "tftp $loadaddr $bootfile;"						\
+   "tftp $fdtaddr $fdtfile;"						\
+   "bootm $loadaddr - $fdtaddr"
+
+#define CONFIG_RAMBOOTCOMMAND						\
+   "setenv bootargs root=/dev/ram rw "					\
+      "console=$consoledev,$baudrate $othbootargs;"			\
+   "tftp $ramdiskaddr $ramdiskfile;"					\
+   "tftp $loadaddr $bootfile;"						\
+   "tftp $fdtaddr $fdtfile;"						\
+   "bootm $loadaddr $ramdiskaddr $fdtaddr"
+
+
+#define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND
+
+#endif	/* __CONFIG_H */