Patches by Murray Jensen, 17 Jun 2003:

- Hymod board database mods: add "who" field and new xilinx chip types
- provide new "init_cmd_timeout()" function so code external to
  "common/main.c" can use the "reset_cmd_timeout()" function before
  entering the main loop
- add DTT support for adm1021 (new file dtt/adm1021.c; config
  slightly different. see include/configs/hymod.h for an example
  (requires CONFIG_DTT_ADM1021, CONFIG_DTT_SENSORS, and
  CFG_DTT_ADM1021 defined)
- add new "eeprom_probe()" function which has similar args and
  behaves in a similar way to "eeprom_read()" etc.
- add 8260 FCC ethernet loopback code (new "eth_loopback_test()"
  function which is enabled by defining CONFIG_ETHER_LOOPBACK_TEST)
- gdbtools copyright update
- ensure that set_msr() executes the "sync" and "isync" instructions
  after the "mtmsr" instruction in cpu/mpc8260/interrupts.c
- 8260 I/O ports fix: Open Drain should be set last when configuring
- add SIU IRQ defines for 8260
- allow LDSCRIPT override and OBJCFLAGS initialization: change to
  config.mk to allow board configurations to override the GNU
  linker script, selected via the LDSCRIPT, make variable, and to
  give an initial value to the OBJCFLAGS make variable
- 8260 i2c enhancement:
  o correctly extends the timeout depending on the size of all
    queued messages for both transmit and receive
  o will not continue with receive if transmit times out
  o ensures that the error callback is done for all queued tx
    and rx messages
  o correctly detects both tx and rx timeouts, only delivers one to
    the callback, and does not overwrite an earlier error
  o logic in i2c_probe now correct
- add "vprintf()" function so that "panic()" function can be
  technically correct
- many Hymod board changes

45 files changed, 3511 insertions, 1766 deletions

diff --git a/CHANGELOG b/CHANGELOG
index 1a39bb5..a0fc00f 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,41 @@
 Changes since U-Boot 0.3.1:
 ======================================================================
 
+* Patches by Murray Jensen, 17 Jun 2003:
+  - Hymod board database mods: add "who" field and new xilinx chip types
+  - provide new "init_cmd_timeout()" function so code external to
+    "common/main.c" can use the "reset_cmd_timeout()" function before
+    entering the main loop
+  - add DTT support for adm1021 (new file dtt/adm1021.c; config
+    slightly different. see include/configs/hymod.h for an example
+    (requires CONFIG_DTT_ADM1021, CONFIG_DTT_SENSORS, and
+    CFG_DTT_ADM1021 defined)
+  - add new "eeprom_probe()" function which has similar args and
+    behaves in a similar way to "eeprom_read()" etc.
+  - add 8260 FCC ethernet loopback code (new "eth_loopback_test()"
+    function which is enabled by defining CONFIG_ETHER_LOOPBACK_TEST)
+  - gdbtools copyright update
+  - ensure that set_msr() executes the "sync" and "isync" instructions
+    after the "mtmsr" instruction in cpu/mpc8260/interrupts.c
+  - 8260 I/O ports fix: Open Drain should be set last when configuring
+  - add SIU IRQ defines for 8260
+  - allow LDSCRIPT override and OBJCFLAGS initialization: change to
+    config.mk to allow board configurations to override the GNU
+    linker script, selected via the LDSCRIPT, make variable, and to
+    give an initial value to the OBJCFLAGS make variable
+  - 8260 i2c enhancement:
+    o correctly extends the timeout depending on the size of all
+      queued messages for both transmit and receive
+    o will not continue with receive if transmit times out
+    o ensures that the error callback is done for all queued tx
+      and rx messages
+    o correctly detects both tx and rx timeouts, only delivers one to
+      the callback, and does not overwrite an earlier error
+    o logic in i2c_probe now correct
+  - add "vprintf()" function so that "panic()" function can be
+    technically correct
+  - many Hymod board changes
+
 * Patches by Robert Schwebel, 14 Jun 2003:
   - add support for Logotronic DL datalogger board
   - cleanup serial line after kermit binary download
diff --git a/board/hymod/Makefile b/board/hymod/Makefile
index 1804b3c..4d3097c 100644
--- a/board/hymod/Makefile
+++ b/board/hymod/Makefile
@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
 
 LIB	= lib$(BOARD).a
 
-OBJS	= $(BOARD).o flash.o bsp.o eeprom.o fetch.o
+OBJS	= $(BOARD).o flash.o bsp.o eeprom.o fetch.o input.o env.o
 
 $(LIB):	.depend $(OBJS)
 	$(AR) crv $@ $^
diff --git a/board/hymod/bsp.c b/board/hymod/bsp.c
index 2ceaeb5..02b6421 100644
--- a/board/hymod/bsp.c
+++ b/board/hymod/bsp.c
@@ -20,13 +20,12 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  * MA 02111-1307 USA
  *
- * hacked for Hymod FPGA support by Murray.Jensen@cmst.csiro.au, 29-Jan-01
+ * hacked for Hymod FPGA support by Murray.Jensen@csiro.au, 29-Jan-01
  */
 
 #include <common.h>
 #include <command.h>
 #include <net.h>
-#include <i2c.h>
 #include <asm/iopin_8260.h>
 #include <cmd_bsp.h>
 
@@ -74,28 +73,29 @@
  *     has not worked (wait several ms?)
  */
 
-int fpga_load (int mezz, uchar * addr, ulong size)
+int
+fpga_load (int mezz, uchar *addr, ulong size)
 {
 	DECLARE_GLOBAL_DATA_PTR;
 
 	hymod_conf_t *cp = &gd->bd->bi_hymod_conf;
+	xlx_info_t *fp;
 	xlx_iopins_t *fpgaio;
 	volatile uchar *fpgabase;
 	volatile uint cnt;
 	uchar *eaddr = addr + size;
 	int result;
 
-	if (mezz) {
-		if (!cp->mezz.mmap[0].prog.exists)
-			return (LOAD_FAIL_NOCONF);
-		fpgabase = (uchar *) cp->mezz.mmap[0].prog.base;
-		fpgaio = &cp->mezz.iopins[0];
-	} else {
-		if (!cp->main.mmap[0].prog.exists)
-			return (LOAD_FAIL_NOCONF);
-		fpgabase = (uchar *) cp->main.mmap[0].prog.base;
-		fpgaio = &cp->main.iopins[0];
-	}
+	if (mezz)
+		fp = &cp->mezz.xlx[0];
+	else
+		fp = &cp->main.xlx[0];
+
+	if (!fp->mmap.prog.exists)
+		return (LOAD_FAIL_NOCONF);
+
+	fpgabase = (uchar *)fp->mmap.prog.base;
+	fpgaio = &fp->iopins;
 
 	/* set enable HIGH if required */
 	if (fpgaio->enable_pin.flag)
@@ -106,7 +106,7 @@ int fpga_load (int mezz, uchar * addr, ulong size)
 
 	/* toggle PROG Low then High (will already be Low after Power-On) */
 	iopin_set_low (&fpgaio->prog_pin);
-	udelay (1);					/* minimum 300ns - 1usec should do it */
+	udelay (1);	/* minimum 300ns - 1usec should do it */
 	iopin_set_high (&fpgaio->prog_pin);
 
 	/* wait for INIT High */
@@ -157,15 +157,15 @@ do_fpga (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 	case 2:
 		if (strcmp (argv[1], "info") == 0) {
 			printf ("\nHymod FPGA Info...\n");
-			printf ("				Address		Size\n");
-			printf ("	Main Configuration:	0x%08x	%d\n",
-					FPGA_MAIN_CFG_BASE, FPGA_MAIN_CFG_SIZE);
-			printf ("	Main Register:		0x%08x	%d\n",
-					FPGA_MAIN_REG_BASE, FPGA_MAIN_REG_SIZE);
-			printf ("	Main Port:		0x%08x	%d\n",
-					FPGA_MAIN_PORT_BASE, FPGA_MAIN_PORT_SIZE);
-			printf ("	Mezz Configuration:	0x%08x	%d\n",
-					FPGA_MEZZ_CFG_BASE, FPGA_MEZZ_CFG_SIZE);
+			printf ("\t\t\t\tAddress\t\tSize\n");
+			printf ("\tMain Configuration:\t0x%08x\t%d\n",
+				FPGA_MAIN_CFG_BASE, FPGA_MAIN_CFG_SIZE);
+			printf ("\tMain Register:\t\t0x%08x\t%d\n",
+				FPGA_MAIN_REG_BASE, FPGA_MAIN_REG_SIZE);
+			printf ("\tMain Port:\t\t0x%08x\t%d\n",
+				FPGA_MAIN_PORT_BASE, FPGA_MAIN_PORT_SIZE);
+			printf ("\tMezz Configuration:\t0x%08x\t%d\n",
+				FPGA_MEZZ_CFG_BASE, FPGA_MEZZ_CFG_SIZE);
 			return 0;
 		}
 		break;
@@ -176,18 +176,21 @@ do_fpga (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 
 			save_addr = addr;
 #if 0
-			/* reading config data unimplemented */
-			while VM
-			  :more config data * addr++ = *fpga;
-		  result = VM:? ? ?
+			/* fpga readback unimplemented */
+			while (more readback data)
+				*addr++ = *fpga;
+			result = error ? STORE_FAIL_XXX : STORE_SUCCESS;
 #else
-			result = 0;
+			result = STORE_SUCCESS;
 #endif
+
 			if (result == STORE_SUCCESS) {
-				printf ("SUCCEEDED (%d bytes)\n", addr - save_addr);
+				printf ("SUCCEEDED (%d bytes)\n",
+					addr - save_addr);
 				return 0;
 			} else
-				printf ("FAILED (%d bytes)\n", addr - save_addr);
+				printf ("FAILED (%d bytes)\n",
+					addr - save_addr);
 			return 1;
 		}
 		break;
@@ -196,25 +199,32 @@ do_fpga (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 		if (strcmp (argv[1], "tftp") == 0) {
 			copy_filename (BootFile, argv[2], sizeof (BootFile));
 			load_addr = simple_strtoul (argv[3], NULL, 16);
+			NetBootFileXferSize = 0;
 
 			if (NetLoop (TFTP) <= 0) {
-				printf ("tftp transfer failed - aborting fgpa load\n");
+				printf ("tftp transfer failed - aborting "
+					"fgpa load\n");
 				return 1;
 			}
 
 			if (NetBootFileXferSize == 0) {
-				printf ("can't determine file size - aborting fpga load\n");
+				printf ("can't determine file size - "
+					"aborting fpga load\n");
 				return 1;
 			}
 
-			printf ("File transfer succeeded - beginning fpga load...");
+			printf ("File transfer succeeded - "
+				"beginning fpga load...");
 
 			result = fpga_load (0, (uchar *) load_addr,
-								NetBootFileXferSize);
+				NetBootFileXferSize);
+
 			if (result == LOAD_SUCCESS) {
 				printf ("SUCCEEDED\n");
 				return 0;
-			} else if (result == LOAD_FAIL_NOINIT)
+			} else if (result == LOAD_FAIL_NOCONF)
+				printf ("FAILED (no CONF)\n");
+			else if (result == LOAD_FAIL_NOINIT)
 				printf ("FAILED (no INIT)\n");
 			else
 				printf ("FAILED (no DONE)\n");
@@ -231,7 +241,8 @@ do_fpga (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 				else if (strcmp (argv[2], "mezz") == 0)
 					mezz = 1;
 				else {
-					printf ("FPGA type must be either `main' or `mezz'\n");
+					printf ("FPGA type must be either "
+						"`main' or `mezz'\n");
 					return 1;
 				}
 				arg = 3;
@@ -239,14 +250,18 @@ do_fpga (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 				mezz = 0;
 				arg = 2;
 			}
+
 			addr = (uchar *) simple_strtoul (argv[arg++], NULL, 16);
 			size = (ulong) simple_strtoul (argv[arg], NULL, 16);
 
 			result = fpga_load (mezz, addr, size);
+
 			if (result == LOAD_SUCCESS) {
 				printf ("SUCCEEDED\n");
 				return 0;
-			} else if (result == LOAD_FAIL_NOINIT)
+			} else if (result == LOAD_FAIL_NOCONF)
+				printf ("FAILED (no CONF)\n");
+			else if (result == LOAD_FAIL_NOINIT)
 				printf ("FAILED (no INIT)\n");
 			else
 				printf ("FAILED (no DONE)\n");
@@ -267,22 +282,21 @@ int
 do_eecl (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 {
 	uchar data[HYMOD_EEPROM_SIZE];
-	uint offset;
-	int rcode = 0;
+	uint addr = CFG_I2C_EEPROM_ADDR;
 
 	switch (argc) {
 
 	case 1:
-		offset = HYMOD_EEOFF_MAIN;
+		addr |= HYMOD_EEOFF_MAIN;
 		break;
 
 	case 2:
 		if (strcmp (argv[1], "main") == 0) {
-			offset = HYMOD_EEOFF_MAIN;
+			addr |= HYMOD_EEOFF_MAIN;
 			break;
 		}
 		if (strcmp (argv[1], "mezz") == 0) {
-			offset = HYMOD_EEOFF_MEZZ;
+			addr |= HYMOD_EEOFF_MEZZ;
 			break;
 		}
 		/* fall through ... */
@@ -293,15 +307,77 @@ do_eecl (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 	}
 
 	memset (data, 0, HYMOD_EEPROM_SIZE);
-	if (i2c_write
-		(CFG_I2C_EEPROM_ADDR | offset, 0, CFG_I2C_EEPROM_ADDR_LEN, data,
-		 HYMOD_EEPROM_SIZE)) {
-		rcode = 1;
+
+	eeprom_write (addr, 0, data, HYMOD_EEPROM_SIZE);
+
+	return 0;
+}
+
+/* ------------------------------------------------------------------------- */
+
+#if 0
+static uchar test_bitfile[] = {
+	/* one day ... */
+};
+#endif
+
+int
+do_htest (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+#if 0
+	int rc;
+#endif
+#ifdef CONFIG_ETHER_LOOPBACK_TEST
+	extern void eth_loopback_test (void);
+#endif /* CONFIG_ETHER_LOOPBACK_TEST */
+
+	printf ("HYMOD tests - ensure loopbacks etc. are connected\n\n");
+
+#if 0
+	/* Load FPGA with test program */
+
+	printf ("Loading test FPGA program ...");
+
+	rc = fpga_load (0, test_bitfile, sizeof (test_bitfile));
+
+	switch (rc) {
+
+	case LOAD_SUCCESS:
+		printf (" SUCCEEDED\n");
+		break;
+
+	case LOAD_FAIL_NOCONF:
+		printf (" FAILED (no configuration space defined)\n");
+		return 1;
+
+	case LOAD_FAIL_NOINIT:
+		printf (" FAILED (timeout - no INIT signal seen)\n");
+		return 1;
+
+	case LOAD_FAIL_NODONE:
+		printf (" FAILED (timeout - no DONE signal seen)\n");
+		return 1;
+
+	default:
+		printf (" FAILED (unknown return code from fpga_load\n");
+		return 1;
 	}
 
-	return rcode;
+	/* run Local Bus <=> Xilinx tests */
+
+	/* tell Xilinx to run ZBT Ram, High Speed serial and Mezzanine tests */
+
+	/* run SDRAM test */
+#endif
+
+#ifdef CONFIG_ETHER_LOOPBACK_TEST
+	/* run Ethernet test */
+	eth_loopback_test ();
+#endif /* CONFIG_ETHER_LOOPBACK_TEST */
+
+	return 0;
 }
 
-#endif							/* CFG_CMD_BSP */
+#endif	/* CFG_CMD_BSP */
 
 /* ------------------------------------------------------------------------- */
diff --git a/board/hymod/config.mk b/board/hymod/config.mk
index 52c3183..ccc7f38 100644
--- a/board/hymod/config.mk
+++ b/board/hymod/config.mk
@@ -29,4 +29,4 @@ TEXT_BASE = 0x40000000
 
 PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)
 
-OBJCFLAGS = --set-section-flags=.ppcenv=contents,alloc,load,data
+OBJCFLAGS = --remove-section=.ppcenv
diff --git a/board/hymod/eeprom.c b/board/hymod/eeprom.c
index 9d50646..01e1453 100644
--- a/board/hymod/eeprom.c
+++ b/board/hymod/eeprom.c
@@ -1,7 +1,6 @@
 /*
  * (C) Copyright 2001
- * Murray Jensen, CSIRO Manufacturing Science and Technology,
- * <Murray.Jensen@cmst.csiro.au>
+ * Murray Jensen, CSIRO-MIT, <Murray.Jensen@csiro.au>
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -26,396 +25,408 @@
 #include <mpc8260.h>
 
 /* imports from fetch.c */
-extern int fetch_and_parse(bd_t *, char *, ulong, int (*)(uchar *, uchar *));
+extern int fetch_and_parse (char *, ulong, int (*)(uchar *, uchar *));
 
-int
-eeprom_load(unsigned offset, hymod_eeprom_t *ep)
-{
-    uchar data[HYMOD_EEPROM_SIZE], *dp, *edp;
-    hymod_eehdr_t *hp;
-    ulong len, crc;
-
-    memset(ep, 0, sizeof *ep);
-    memset(data, 0, HYMOD_EEPROM_SIZE);
-    crc = 0;
-
-    hp = (hymod_eehdr_t *)data;
-    eeprom_read(CFG_DEF_EEPROM_ADDR, offset, (uchar *)hp, sizeof (*hp));
-    offset += sizeof (*hp);
-
-    if (hp->id != HYMOD_EEPROM_ID || hp->ver > HYMOD_EEPROM_VER ||
-      (len = hp->len) > HYMOD_EEPROM_MAXLEN)
-	return (0);
-
-    dp = (uchar *)(hp + 1); edp = dp + len;
-    eeprom_read(CFG_DEF_EEPROM_ADDR, offset, dp, len);
-    offset += len;
-
-    eeprom_read(CFG_DEF_EEPROM_ADDR, offset, (uchar *)&crc, sizeof (ulong));
-
-    if (crc32(0, data, edp - data) != crc)
-	return (0);
-
-    ep->ver = hp->ver;
+/* imports from input.c */
+extern int hymod_get_serno (const char *);
 
-    for (;;) {
-	hymod_eerec_t *rp = (hymod_eerec_t *)dp;
-	ulong rtyp;
-	uchar rlen, *rdat;
-	uint rsiz;
+/* this is relative to the root of the server's tftp directory */
+static char *def_bddb_cfgdir = "/hymod/bddb";
 
-	if (rp->small.topbit == 0) {
-	    rtyp = rp->small.type;
-	    rlen = rp->small.len;
-	    rdat = rp->small.data;
-	    rsiz = offsetof(hymod_eerec_t, small.data) + rlen;
-	}
-	else if (rp->medium.nxtbit == 0) {
-	    rtyp = rp->medium.type;
-	    rlen = rp->medium.len;
-	    rdat = rp->medium.data;
-	    rsiz = offsetof(hymod_eerec_t, medium.data) + rlen;
-	}
-	else {
-	    rtyp = rp->large.type;
-	    rlen = rp->large.len;
-	    rdat = rp->large.data;
-	    rsiz = offsetof(hymod_eerec_t, large.data) + rlen;
-	}
+static int
+hymod_eeprom_load (int which, hymod_eeprom_t *ep)
+{
+	unsigned dev_addr = CFG_I2C_EEPROM_ADDR | \
+		(which ? HYMOD_EEOFF_MEZZ : HYMOD_EEOFF_MAIN);
+	unsigned offset = 0;
+	uchar data[HYMOD_EEPROM_SIZE], *dp, *edp;
+	hymod_eehdr_t *hp;
+	ulong len, crc;
+
+	memset (ep, 0, sizeof *ep);
+	memset (data, 0, HYMOD_EEPROM_SIZE);
+	crc = 0;
+
+	hp = (hymod_eehdr_t *)data;
+	eeprom_read (dev_addr, offset, (uchar *)hp, sizeof (*hp));
+	offset += sizeof (*hp);
+
+	if (hp->id != HYMOD_EEPROM_ID || hp->ver > HYMOD_EEPROM_VER ||
+	  (len = hp->len) > HYMOD_EEPROM_MAXLEN)
+	    return (0);
+
+	dp = (uchar *)(hp + 1); edp = dp + len;
+	eeprom_read (dev_addr, offset, dp, len);
+	offset += len;
+
+	eeprom_read (dev_addr, offset, (uchar *)&crc, sizeof (ulong));
+
+	if (crc32 (0, data, edp - data) != crc)
+		return (0);
+
+	ep->ver = hp->ver;
+
+	for (;;) {
+		hymod_eerec_t *rp = (hymod_eerec_t *)dp;
+		ulong rtyp;
+		uchar rlen, *rdat;
+		uint rsiz;
+
+		if (rp->small.topbit == 0) {
+		    rtyp = rp->small.type;
+		    rlen = rp->small.len;
+		    rdat = rp->small.data;
+		    rsiz = offsetof (hymod_eerec_t, small.data) + rlen;
+		}
+		else if (rp->medium.nxtbit == 0) {
+		    rtyp = rp->medium.type;
+		    rlen = rp->medium.len;
+		    rdat = rp->medium.data;
+		    rsiz = offsetof (hymod_eerec_t, medium.data) + rlen;
+		}
+		else {
+		    rtyp = rp->large.type;
+		    rlen = rp->large.len;
+		    rdat = rp->large.data;
+		    rsiz = offsetof (hymod_eerec_t, large.data) + rlen;
+		}
 
-	if (rtyp == 0)
-	    break;
-
-	dp += rsiz;
-	if (dp > edp)	/* error? */
-	    break;
-
-	switch (rtyp) {
-
-	case HYMOD_EEREC_SERNO:		/* serial number */
-	    if (rlen == sizeof (ulong))
-		memcpy(&ep->serno, rdat, sizeof (ulong));
-	    break;
-
-	case HYMOD_EEREC_DATE:		/* date */
-	    if (rlen == sizeof (hymod_date_t))
-		memcpy(&ep->date, rdat, sizeof (hymod_date_t));
-	    break;
-
-	case HYMOD_EEREC_BATCH:		/* batch */
-	    if (rlen <= HYMOD_MAX_BATCH)
-		memcpy(ep->batch, rdat, ep->batchlen = rlen);
-	    break;
-
-	case HYMOD_EEREC_TYPE:		/* board type */
-	    if (rlen == 1)
-		ep->bdtype = *rdat;
-	    break;
-
-	case HYMOD_EEREC_REV:		/* board revision */
-	    if (rlen == 1)
-		ep->bdrev = *rdat;
-	    break;
-
-	case HYMOD_EEREC_SDRAM:		/* sdram size(s) */
-	    if (rlen > 0 && rlen <= HYMOD_MAX_SDRAM) {
-		int i;
-
-		for (i = 0; i < rlen; i++)
-		    ep->sdramsz[i] = rdat[i];
-		ep->nsdram = rlen;
-	    }
-	    break;
-
-	case HYMOD_EEREC_FLASH:		/* flash size(s) */
-	    if (rlen > 0 && rlen <= HYMOD_MAX_FLASH) {
-		int i;
-
-		for (i = 0; i < rlen; i++)
-		    ep->flashsz[i] = rdat[i];
-		ep->nflash = rlen;
-	    }
-	    break;
-
-	case HYMOD_EEREC_ZBT:		/* zbt ram size(s) */
-	    if (rlen > 0 && rlen <= HYMOD_MAX_ZBT) {
-		int i;
-
-		for (i = 0; i < rlen; i++)
-		    ep->zbtsz[i] = rdat[i];
-		ep->nzbt = rlen;
-	    }
-	    break;
-
-	case HYMOD_EEREC_XLXTYP:	/* xilinx fpga type(s) */
-	    if (rlen > 0 && rlen <= HYMOD_MAX_XLX) {
-		int i;
-
-		for (i = 0; i < rlen; i++)
-		    ep->xlx[i].type = rdat[i];
-		ep->nxlx = rlen;
-	    }
-	    break;
-
-	case HYMOD_EEREC_XLXSPD:	/* xilinx fpga speed(s) */
-	    if (rlen > 0 && rlen <= HYMOD_MAX_XLX) {
-		int i;
-
-		for (i = 0; i < rlen; i++)
-		    ep->xlx[i].speed = rdat[i];
-	    }
-	    break;
-
-	case HYMOD_EEREC_XLXTMP:	/* xilinx fpga temperature(s) */
-	    if (rlen > 0 && rlen <= HYMOD_MAX_XLX) {
-		int i;
-
-		for (i = 0; i < rlen; i++)
-		    ep->xlx[i].temp = rdat[i];
-	    }
-	    break;
-
-	case HYMOD_EEREC_XLXGRD:	/* xilinx fpga grade(s) */
-	    if (rlen > 0 && rlen <= HYMOD_MAX_XLX) {
-		int i;
-
-		for (i = 0; i < rlen; i++)
-		    ep->xlx[i].grade = rdat[i];
-	    }
-	    break;
-
-	case HYMOD_EEREC_CPUTYP:	/* CPU type */
-	    if (rlen == 1)
-		ep->mpc.type = *rdat;
-	    break;
-
-	case HYMOD_EEREC_CPUSPD:	/* CPU speed */
-	    if (rlen == 1)
-		ep->mpc.cpuspd = *rdat;
-	    break;
-
-	case HYMOD_EEREC_CPMSPD:	/* CPM speed */
-	    if (rlen == 1)
-		ep->mpc.cpmspd = *rdat;
-	    break;
-
-	case HYMOD_EEREC_BUSSPD:	/* bus speed */
-	    if (rlen == 1)
-		ep->mpc.busspd = *rdat;
-	    break;
-
-	case HYMOD_EEREC_HSTYPE:	/* high-speed serial chip type */
-	    if (rlen == 1)
-		ep->hss.type = *rdat;
-	    break;
-
-	case HYMOD_EEREC_HSCHIN:	/* high-speed serial input channels */
-	    if (rlen == 1)
-		ep->hss.nchin = *rdat;
-	    break;
-
-	case HYMOD_EEREC_HSCHOUT:	/* high-speed serial output channels */
-	    if (rlen == 1)
-		ep->hss.nchout = *rdat;
-	    break;
-
-	default:	/* ignore */
-	    break;
+		if (rtyp == 0)
+			break;
+
+		dp += rsiz;
+		if (dp > edp)	/* error? */
+			break;
+
+		switch (rtyp) {
+
+		case HYMOD_EEREC_SERNO:		/* serial number */
+			if (rlen == sizeof (ulong))
+				memcpy (&ep->serno, rdat, sizeof (ulong));
+			break;
+
+		case HYMOD_EEREC_DATE:		/* date */
+			if (rlen == sizeof (hymod_date_t))
+				memcpy (&ep->date, rdat, sizeof (hymod_date_t));
+			break;
+
+		case HYMOD_EEREC_BATCH:		/* batch */
+			if (rlen <= HYMOD_MAX_BATCH)
+				memcpy (ep->batch, rdat, ep->batchlen = rlen);
+			break;
+
+		case HYMOD_EEREC_TYPE:		/* board type */
+			if (rlen == 1)
+				ep->bdtype = *rdat;
+			break;
+
+		case HYMOD_EEREC_REV:		/* board revision */
+			if (rlen == 1)
+				ep->bdrev = *rdat;
+			break;
+
+		case HYMOD_EEREC_SDRAM:		/* sdram size(s) */
+			if (rlen > 0 && rlen <= HYMOD_MAX_SDRAM) {
+				int i;
+
+				for (i = 0; i < rlen; i++)
+					ep->sdramsz[i] = rdat[i];
+				ep->nsdram = rlen;
+			}
+			break;
+
+		case HYMOD_EEREC_FLASH:		/* flash size(s) */
+			if (rlen > 0 && rlen <= HYMOD_MAX_FLASH) {
+				int i;
+
+				for (i = 0; i < rlen; i++)
+					ep->flashsz[i] = rdat[i];
+				ep->nflash = rlen;
+			}
+			break;
+
+		case HYMOD_EEREC_ZBT:		/* zbt ram size(s) */
+			if (rlen > 0 && rlen <= HYMOD_MAX_ZBT) {
+				int i;
+
+				for (i = 0; i < rlen; i++)
+					ep->zbtsz[i] = rdat[i];
+				ep->nzbt = rlen;
+			}
+			break;
+
+		case HYMOD_EEREC_XLXTYP:	/* xilinx fpga type(s) */
+			if (rlen > 0 && rlen <= HYMOD_MAX_XLX) {
+				int i;
+
+				for (i = 0; i < rlen; i++)
+					ep->xlx[i].type = rdat[i];
+				ep->nxlx = rlen;
+			}
+			break;
+
+		case HYMOD_EEREC_XLXSPD:	/* xilinx fpga speed(s) */
+			if (rlen > 0 && rlen <= HYMOD_MAX_XLX) {
+				int i;
+
+				for (i = 0; i < rlen; i++)
+					ep->xlx[i].speed = rdat[i];
+			}
+			break;
+
+		case HYMOD_EEREC_XLXTMP:	/* xilinx fpga temperature(s) */
+			if (rlen > 0 && rlen <= HYMOD_MAX_XLX) {
+				int i;
+
+				for (i = 0; i < rlen; i++)
+					ep->xlx[i].temp = rdat[i];
+			}
+			break;
+
+		case HYMOD_EEREC_XLXGRD:	/* xilinx fpga grade(s) */
+			if (rlen > 0 && rlen <= HYMOD_MAX_XLX) {
+				int i;
+
+				for (i = 0; i < rlen; i++)
+					ep->xlx[i].grade = rdat[i];
+			}
+			break;
+
+		case HYMOD_EEREC_CPUTYP:	/* CPU type */
+			if (rlen == 1)
+				ep->mpc.type = *rdat;
+			break;
+
+		case HYMOD_EEREC_CPUSPD:	/* CPU speed */
+			if (rlen == 1)
+				ep->mpc.cpuspd = *rdat;
+			break;
+
+		case HYMOD_EEREC_CPMSPD:	/* CPM speed */
+			if (rlen == 1)
+				ep->mpc.cpmspd = *rdat;
+			break;
+
+		case HYMOD_EEREC_BUSSPD:	/* bus speed */
+			if (rlen == 1)
+				ep->mpc.busspd = *rdat;
+			break;
+
+		case HYMOD_EEREC_HSTYPE:	/* hs-serial chip type */
+			if (rlen == 1)
+				ep->hss.type = *rdat;
+			break;
+
+		case HYMOD_EEREC_HSCHIN:	/* num hs-serial input chans */
+			if (rlen == 1)
+				ep->hss.nchin = *rdat;
+			break;
+
+		case HYMOD_EEREC_HSCHOUT:	/* num hs-serial output chans */
+			if (rlen == 1)
+				ep->hss.nchout = *rdat;
+			break;
+
+		default:	/* ignore */
+			break;
+		}
 	}
-    }
 
-    return (1);
+	return (1);
 }
 
 /* maps an ascii "name=value" into a binary eeprom data record */
 typedef
-    struct _eerec_map {
-	char *name;
-	uint type;
-	uchar *(*handler)(struct _eerec_map *, uchar *, uchar *, uchar *);
-	uint length;
-	uint maxlen;
-    }
+	struct _eerec_map {
+		char *name;
+		uint type;
+		uchar *(*handler) \
+			(struct _eerec_map *, uchar *, uchar *, uchar *);
+		uint length;
+		uint maxlen;
+	}
 eerec_map_t;
 
 static uchar *
-uint_handler(eerec_map_t *rp, uchar *value, uchar *dp, uchar *edp)
+uint_handler (eerec_map_t *rp, uchar *val, uchar *dp, uchar *edp)
 {
-    uchar *eval;
-    union {
-	uchar cval[4];
-	ushort sval[2];
-	ulong lval;
-    } rdata;
-
-    rdata.lval = simple_strtol(value, (char **)&eval, 10);
-
-    if (eval == value || *eval != '\0') {
-	printf("%s record (%s) is not a valid uint\n", rp->name, value);
-	return (NULL);
-    }
-
-    if (dp + 2 + rp->length > edp) {
-	printf("can't fit %s record into eeprom\n", rp->name);
-	return (NULL);
-    }
-
-    *dp++ = rp->type;
-    *dp++ = rp->length;
-
-    switch (rp->length) {
-
-    case 1:
-	if (rdata.lval >= 256) {
-	    printf("%s record value (%lu) out of range (0-255)\n",
-		rp->name, rdata.lval);
-	    return (NULL);
+	uchar *eval;
+	union {
+		uchar cval[4];
+		ushort sval[2];
+		ulong lval;
+	} rdata;
+
+	rdata.lval = simple_strtol (val, (char **)&eval, 10);
+
+	if (eval == val || *eval != '\0') {
+		printf ("%s rec (%s) is not a valid uint\n",
+			rp->name, val);
+		return (NULL);
 	}
-	*dp++ = rdata.cval[3];
-	break;
-
-    case 2:
-	if (rdata.lval >= 65536) {
-	    printf("%s record value (%lu) out of range (0-65535)\n",
-		rp->name, rdata.lval);
-	    return (NULL);
+
+	if (dp + 2 + rp->length > edp) {
+		printf ("can't fit %s rec into eeprom\n", rp->name);
+		return (NULL);
 	}
-	memcpy(dp, &rdata.sval[1], 2);
-	dp += 2;
-	break;
 
-    case 4:
-	memcpy(dp, &rdata.lval, 4);
-	dp += 4;
-	break;
+	*dp++ = rp->type;
+	*dp++ = rp->length;
+
+	switch (rp->length) {
 
-    default:
-	printf("huh? rp->length not 1, 2 or 4! (%d)\n", rp->length);
-	return (NULL);
-    }
+	case 1:
+		if (rdata.lval >= 256) {
+			printf ("%s rec value (%lu) out of range (0-255)\n",
+				rp->name, rdata.lval);
+			return (NULL);
+		}
+		*dp++ = rdata.cval[3];
+		break;
+
+	case 2:
+		if (rdata.lval >= 65536) {
+			printf ("%s rec value (%lu) out of range (0-65535)\n",
+				rp->name, rdata.lval);
+			return (NULL);
+		}
+		memcpy (dp, &rdata.sval[1], 2);
+		dp += 2;
+		break;
+
+	case 4:
+		memcpy (dp, &rdata.lval, 4);
+		dp += 4;
+		break;
+
+	default:
+		printf ("huh? rp->length not 1, 2 or 4! (%d)\n", rp->length);
+		return (NULL);
+	}
 
-    return (dp);
+	return (dp);
 }
 
 static uchar *
-date_handler(eerec_map_t *rp, uchar *value, uchar *dp, uchar *edp)
+date_handler (eerec_map_t *rp, uchar *val, uchar *dp, uchar *edp)
 {
-    hymod_date_t date;
-    uchar *p = value, *ep;
+	hymod_date_t date;
+	uchar *p = val, *ep;
 
-    date.year = simple_strtol(p, (char **)&ep, 10);
-    if (ep == p || *ep++ != '-') {
+	date.year = simple_strtol (p, (char **)&ep, 10);
+	if (ep == p || *ep++ != '-') {
 bad_date:
-	printf("%s record (%s) is not a valid date\n", rp->name, value);
-	return (NULL);
-    }
+		printf ("%s rec (%s) is not a valid date\n", rp->name, val);
+		return (NULL);
+	}
 
-    date.month = simple_strtol(p = ep, (char **)&ep, 10);
-    if (ep == p || *ep++ != '-' || date.month == 0 || date.month > 12)
-	goto bad_date;
+	date.month = simple_strtol (p = ep, (char **)&ep, 10);
+	if (ep == p || *ep++ != '-' || date.month == 0 || date.month > 12)
+		goto bad_date;
 
-    date.day = simple_strtol(p = ep, (char **)&ep, 10);
-    if (ep == p || *ep != '\0' || date.day == 0 || date.day > 31)
-	goto bad_date;
+	date.day = simple_strtol (p = ep, (char **)&ep, 10);
+	if (ep == p || *ep != '\0' || date.day == 0 || date.day > 31)
+		goto bad_date;
 
-    if (dp + 2 + sizeof (hymod_date_t) > edp) {
-	printf("can't fit %s record into eeprom\n", rp->name);
-	return (NULL);
-    }
+	if (dp + 2 + sizeof (hymod_date_t) > edp) {
+		printf ("can't fit %s rec into eeprom\n", rp->name);
+		return (NULL);
+	}
 
-    *dp++ = rp->type;
-    *dp++ = sizeof (hymod_date_t);
-    memcpy(dp, &date, sizeof (hymod_date_t));
-    dp += sizeof (hymod_date_t);
+	*dp++ = rp->type;
+	*dp++ = sizeof (hymod_date_t);
+	memcpy (dp, &date, sizeof (hymod_date_t));
+	dp += sizeof (hymod_date_t);
 
-    return (dp);
+	return (dp);
 }
 
 static uchar *
-string_handler(eerec_map_t *rp, uchar *value, uchar *dp, uchar *edp)
+string_handler (eerec_map_t *rp, uchar *val, uchar *dp, uchar *edp)
 {
-    uint len;
+	uint len;
 
-    if ((len = strlen(value)) > rp->maxlen) {
-	printf("%s record (%s) string is too long (%d>%d)\n",
-	    rp->name, value, len, rp->maxlen);
-	return (NULL);
-    }
+	if ((len = strlen (val)) > rp->maxlen) {
+		printf ("%s rec (%s) string is too long (%d>%d)\n",
+			rp->name, val, len, rp->maxlen);
+		return (NULL);
+	}
 
-    if (dp + 2 + len > edp) {
-	printf("can't fit %s record into eeprom\n", rp->name);
-	return (NULL);
-    }
+	if (dp + 2 + len > edp) {
+		printf ("can't fit %s rec into eeprom\n", rp->name);
+		return (NULL);
+	}
 
-    *dp++ = rp->type;
-    *dp++ = len;
-    memcpy(dp, value, len);
-    dp += len;
+	*dp++ = rp->type;
+	*dp++ = len;
+	memcpy (dp, val, len);
+	dp += len;
 
-    return (dp);
+	return (dp);
 }
 
 static uchar *
-bytes_handler(eerec_map_t *rp, uchar *value, uchar *dp, uchar *edp)
+bytes_handler (eerec_map_t *rp, uchar *val, uchar *dp, uchar *edp)
 {
-    uchar bytes[HYMOD_MAX_BYTES], nbytes = 0;
-    uchar *p = value, *ep;
+	uchar bytes[HYMOD_MAX_BYTES], nbytes = 0;
+	uchar *p = val, *ep;
 
-    for (;;) {
+	for (;;) {
 
-	if (nbytes >= HYMOD_MAX_BYTES) {
-	    printf("%s record (%s) byte array too long\n", rp->name, value);
-	    return (NULL);
-	}
+		if (nbytes >= HYMOD_MAX_BYTES) {
+			printf ("%s rec (%s) byte array too long\n",
+				rp->name, val);
+			return (NULL);
+		}
 
-	bytes[nbytes++] = simple_strtol(p, (char **)&ep, 10);
+		bytes[nbytes++] = simple_strtol (p, (char **)&ep, 10);
 
-	if (ep == p || (*ep != '\0' && *ep != ',')) {
-	    printf("%s record (%s) byte array has invalid uint\n",
-		rp->name, value);
-	    return (NULL);
-	}
+		if (ep == p || (*ep != '\0' && *ep != ',')) {
+			printf ("%s rec (%s) byte array has invalid uint\n",
+				rp->name, val);
+			return (NULL);
+		}
 
-	if (*ep++ == '\0')
-	    break;
+		if (*ep++ == '\0')
+			break;
 
-	p = ep;
-    }
+		p = ep;
+	}
 
-    if (dp + 2 + nbytes > edp) {
-	printf("can't fit %s record into eeprom\n", rp->name);
-	return (NULL);
-    }
+	if (dp + 2 + nbytes > edp) {
+		printf ("can't fit %s rec into eeprom\n", rp->name);
+		return (NULL);
+	}
 
-    *dp++ = rp->type;
-    *dp++ = nbytes;
-    memcpy(dp, bytes, nbytes);
-    dp += nbytes;
+	*dp++ = rp->type;
+	*dp++ = nbytes;
+	memcpy (dp, bytes, nbytes);
+	dp += nbytes;
 
-    return (dp);
+	return (dp);
 }
 
 static eerec_map_t eerec_map[] = {
-   /* name       type                 handler         len max             */
-    { "serno",   HYMOD_EEREC_SERNO,   uint_handler,   4,  0               },
-    { "date",    HYMOD_EEREC_DATE,    date_handler,   4,  0               },
-    { "batch",   HYMOD_EEREC_BATCH,   string_handler, 0,  HYMOD_MAX_BATCH },
-    { "type",    HYMOD_EEREC_TYPE,    uint_handler,   1,  0               },
-    { "rev",     HYMOD_EEREC_REV,     uint_handler,   1,  0               },
-    { "sdram",   HYMOD_EEREC_SDRAM,   bytes_handler,  0,  HYMOD_MAX_SDRAM },
-    { "flash",   HYMOD_EEREC_FLASH,   bytes_handler,  0,  HYMOD_MAX_FLASH },
-    { "zbt",     HYMOD_EEREC_ZBT,     bytes_handler,  0,  HYMOD_MAX_ZBT   },
-    { "xlxtyp",  HYMOD_EEREC_XLXTYP,  bytes_handler,  0,  HYMOD_MAX_XLX   },
-    { "xlxspd",  HYMOD_EEREC_XLXSPD,  bytes_handler,  0,  HYMOD_MAX_XLX   },
-    { "xlxtmp",  HYMOD_EEREC_XLXTMP,  bytes_handler,  0,  HYMOD_MAX_XLX   },
-    { "xlxgrd",  HYMOD_EEREC_XLXGRD,  bytes_handler,  0,  HYMOD_MAX_XLX   },
-    { "cputyp",  HYMOD_EEREC_CPUTYP,  uint_handler,   1,  0               },
-    { "cpuspd",  HYMOD_EEREC_CPUSPD,  uint_handler,   1,  0               },
-    { "cpmspd",  HYMOD_EEREC_CPMSPD,  uint_handler,   1,  0               },
-    { "busspd",  HYMOD_EEREC_BUSSPD,  uint_handler,   1,  0               },
-    { "hstype",  HYMOD_EEREC_HSTYPE,  uint_handler,   1,  0               },
-    { "hschin",  HYMOD_EEREC_HSCHIN,  uint_handler,   1,  0               },
-    { "hschout", HYMOD_EEREC_HSCHOUT, uint_handler,   1,  0               },
+	/* name      type                 handler         len max             */
+	{ "serno",   HYMOD_EEREC_SERNO,   uint_handler,   4,  0               },
+	{ "date",    HYMOD_EEREC_DATE,    date_handler,   4,  0               },
+	{ "batch",   HYMOD_EEREC_BATCH,   string_handler, 0,  HYMOD_MAX_BATCH },
+	{ "type",    HYMOD_EEREC_TYPE,    uint_handler,   1,  0               },
+	{ "rev",     HYMOD_EEREC_REV,     uint_handler,   1,  0               },
+	{ "sdram",   HYMOD_EEREC_SDRAM,   bytes_handler,  0,  HYMOD_MAX_SDRAM },
+	{ "flash",   HYMOD_EEREC_FLASH,   bytes_handler,  0,  HYMOD_MAX_FLASH },
+	{ "zbt",     HYMOD_EEREC_ZBT,     bytes_handler,  0,  HYMOD_MAX_ZBT   },
+	{ "xlxtyp",  HYMOD_EEREC_XLXTYP,  bytes_handler,  0,  HYMOD_MAX_XLX   },
+	{ "xlxspd",  HYMOD_EEREC_XLXSPD,  bytes_handler,  0,  HYMOD_MAX_XLX   },
+	{ "xlxtmp",  HYMOD_EEREC_XLXTMP,  bytes_handler,  0,  HYMOD_MAX_XLX   },
+	{ "xlxgrd",  HYMOD_EEREC_XLXGRD,  bytes_handler,  0,  HYMOD_MAX_XLX   },
+	{ "cputyp",  HYMOD_EEREC_CPUTYP,  uint_handler,   1,  0               },
+	{ "cpuspd",  HYMOD_EEREC_CPUSPD,  uint_handler,   1,  0               },
+	{ "cpmspd",  HYMOD_EEREC_CPMSPD,  uint_handler,   1,  0               },
+	{ "busspd",  HYMOD_EEREC_BUSSPD,  uint_handler,   1,  0               },
+	{ "hstype",  HYMOD_EEREC_HSTYPE,  uint_handler,   1,  0               },
+	{ "hschin",  HYMOD_EEREC_HSCHIN,  uint_handler,   1,  0               },
+	{ "hschout", HYMOD_EEREC_HSCHOUT, uint_handler,   1,  0               },
 };
 
 static int neerecs = sizeof eerec_map / sizeof eerec_map[0];
@@ -423,175 +434,248 @@ static int neerecs = sizeof eerec_map / sizeof eerec_map[0];
 static uchar data[HYMOD_EEPROM_SIZE], *sdp, *dp, *edp;
 
 static int
-eeprom_fetch_callback(uchar *name, uchar *value)
+eerec_callback (uchar *name, uchar *val)
 {
-    eerec_map_t *rp;
+	eerec_map_t *rp;
 
-    for (rp = eerec_map; rp < &eerec_map[neerecs]; rp++)
-	if (strcmp(name, rp->name) == 0)
-	    break;
+	for (rp = eerec_map; rp < &eerec_map[neerecs]; rp++)
+		if (strcmp (name, rp->name) == 0)
+			break;
 
-    if (rp >= &eerec_map[neerecs])
-	return (0);
+	if (rp >= &eerec_map[neerecs])
+		return (0);
 
-    if ((dp = (*rp->handler)(rp, value, dp, edp)) == NULL)
-	return (0);
+	if ((dp = (*rp->handler) (rp, val, dp, edp)) == NULL)
+		return (0);
 
-    return (1);
+	return (1);
 }
 
-int
-eeprom_fetch(unsigned offset, bd_t *bd, char *filename, ulong addr)
+static int
+hymod_eeprom_fetch(int which, char *filename, ulong addr)
 {
-    hymod_eehdr_t *hp = (hymod_eehdr_t *)&data[0];
-    ulong crc;
+	unsigned dev_addr = CFG_I2C_EEPROM_ADDR | \
+		(which ? HYMOD_EEOFF_MEZZ : HYMOD_EEOFF_MAIN);
+	hymod_eehdr_t *hp = (hymod_eehdr_t *)&data[0];
+	ulong crc;
 
-    hp->id = HYMOD_EEPROM_ID;
-    hp->ver = HYMOD_EEPROM_VER;
+	hp->id = HYMOD_EEPROM_ID;
+	hp->ver = HYMOD_EEPROM_VER;
 
-    dp = sdp = (uchar *)(hp + 1);
-    edp = dp + HYMOD_EEPROM_MAXLEN;
+	dp = sdp = (uchar *)(hp + 1);
+	edp = dp + HYMOD_EEPROM_MAXLEN;
 
-    if (fetch_and_parse(bd, filename, addr, eeprom_fetch_callback) == 0)
-	return (0);
+	if (fetch_and_parse (filename, addr, eerec_callback) == 0)
+		return (0);
 
-    hp->len = dp - sdp;
+	hp->len = dp - sdp;
 
-    crc = crc32(0, data, dp - data);
-    memcpy(dp, &crc, sizeof (ulong));
-    dp += sizeof (ulong);
+	crc = crc32 (0, data, dp - data);
+	memcpy (dp, &crc, sizeof (ulong));
+	dp += sizeof (ulong);
 
-    eeprom_write(CFG_DEF_EEPROM_ADDR, offset, data, dp - data);
+	eeprom_write (dev_addr, 0, data, dp - data);
 
-    return (1);
+	return (1);
 }
 
 static char *type_vals[] = {
-    "NONE", "IO", "CLP", "DSP", "INPUT", "ALT-INPUT", "DISPLAY"
+	"NONE", "IO", "CLP", "DSP", "INPUT", "ALT-INPUT", "DISPLAY"
 };
 
 static char *xlxtyp_vals[] = {
-    "NONE", "XCV300E", "XCV400E", "XCV600E"
+	"NONE", "XCV300E", "XCV400E", "XCV600E"
 };
 
 static char *xlxspd_vals[] = {
-    "NONE", "6", "7", "8"
+	"NONE", "6", "7", "8"
 };
 
 static char *xlxtmp_vals[] = {
-    "NONE", "COM", "IND"
+	"NONE", "COM", "IND"
 };
 
 static char *xlxgrd_vals[] = {
-    "NONE", "NORMAL", "ENGSAMP"
+	"NONE", "NORMAL", "ENGSAMP"
 };
 
 static char *cputyp_vals[] = {
-    "NONE", "MPC8260"
+	"NONE", "MPC8260"
 };
 
 static char *clk_vals[] = {
-    "NONE", "33", "66", "100", "133", "166", "200"
+	"NONE", "33", "66", "100", "133", "166", "200"
 };
 
 static char *hstype_vals[] = {
-    "NONE", "AMCC-S2064A"
+	"NONE", "AMCC-S2064A"
 };
 
 static void
-print_mem(char *l, char *s, uchar n, uchar a[])
+print_mem (char *l, char *s, uchar n, uchar a[])
 {
-    if (n > 0) {
-	if (n == 1)
-	    printf("%s%dMB %s", s, 1 << (a[0] - 20), l);
-	else {
-	    ulong t = 0;
-	    int i;
-
-	    for (i = 0; i < n; i++)
-		t += 1 << (a[i] - 20);
-
-	    printf("%s%luMB %s (%d banks:", s, t, l, n);
-
-	    for (i = 0; i < n; i++)
-		printf("%dMB%s", 1 << (a[i] - 20), (i == n - 1) ? ")" : ",");
+	if (n > 0) {
+		if (n == 1)
+			printf ("%s%dMB %s", s, 1 << (a[0] - 20), l);
+		else {
+			ulong t = 0;
+			int i;
+
+			for (i = 0; i < n; i++)
+				t += 1 << (a[i] - 20);
+
+			printf ("%s%luMB %s (%d banks:", s, t, l, n);
+
+			for (i = 0; i < n; i++)
+				printf ("%dMB%s",
+					1 << (a[i] - 20),
+					(i == n - 1) ? ")" : ",");
+		}
 	}
-    }
-    else
-	printf("%sNO %s", s, l);
+	else
+		printf ("%sNO %s", s, l);
 }
 
 void
-eeprom_print(hymod_eeprom_t *ep)
+hymod_eeprom_print (hymod_eeprom_t *ep)
 {
-    int i;
-
-    printf("         Hymod %s board, rev %03d\n",
-	type_vals[ep->bdtype], ep->bdrev);
-
-    printf("         serial #: %010lu, date %04d-%02d-%02d",
-	ep->serno, ep->date.year, ep->date.month, ep->date.day);
-    if (ep->batchlen > 0)
-	printf(", batch \"%.*s\"", ep->batchlen, ep->batch);
-    puts("\n");
-
-    switch (ep->bdtype) {
-
-    case HYMOD_BDTYPE_IO:
-    case HYMOD_BDTYPE_CLP:
-    case HYMOD_BDTYPE_DSP:
-	printf("         Motorola %s CPU, speeds: %s/%s/%s",
-	    cputyp_vals[ep->mpc.type], clk_vals[ep->mpc.cpuspd],
-	    clk_vals[ep->mpc.cpmspd], clk_vals[ep->mpc.busspd]);
-
-	print_mem("SDRAM", ", ", ep->nsdram, ep->sdramsz);
-
-	print_mem("FLASH", ", ", ep->nflash, ep->flashsz);
-
-	puts("\n");
-
-	print_mem("ZBT", "         ", ep->nzbt, ep->zbtsz);
-
-	if (ep->nxlx > 0) {
-	    hymod_xlx_t *xp;
-
-	    if (ep->nxlx == 1) {
-		xp = &ep->xlx[0];
-		printf(", Xilinx %s FPGA (%s/%s/%s)",
-		    xlxtyp_vals[xp->type], xlxspd_vals[xp->speed],
-		    xlxtmp_vals[xp->temp], xlxgrd_vals[xp->grade]);
-	    }
-	    else {
-		printf(", %d Xilinx FPGAs (", ep->nxlx);
-		for (i = 0; i < ep->nxlx; i++) {
-		    xp = &ep->xlx[i];
-		    printf("%s[%s/%s/%s]%s",
-			xlxtyp_vals[xp->type], xlxspd_vals[xp->speed],
-			xlxtmp_vals[xp->temp], xlxgrd_vals[xp->grade],
-			(i == ep->nxlx - 1) ? ")" : ", ");
+	int i;
+
+	printf ("         Hymod %s board, rev %03d\n",
+		type_vals[ep->bdtype], ep->bdrev);
+
+	printf ("         serial #: %010lu, date %04d-%02d-%02d",
+		ep->serno, ep->date.year, ep->date.month, ep->date.day);
+	if (ep->batchlen > 0)
+		printf (", batch \"%.*s\"", ep->batchlen, ep->batch);
+	puts ("\n");
+
+	switch (ep->bdtype) {
+
+	case HYMOD_BDTYPE_IO:
+	case HYMOD_BDTYPE_CLP:
+	case HYMOD_BDTYPE_DSP:
+		printf ("         Motorola %s CPU, speeds: %s/%s/%s",
+		    cputyp_vals[ep->mpc.type], clk_vals[ep->mpc.cpuspd],
+		    clk_vals[ep->mpc.cpmspd], clk_vals[ep->mpc.busspd]);
+
+		print_mem ("SDRAM", ", ", ep->nsdram, ep->sdramsz);
+
+		print_mem ("FLASH", ", ", ep->nflash, ep->flashsz);
+
+		puts ("\n");
+
+		print_mem ("ZBT", "         ", ep->nzbt, ep->zbtsz);
+
+		if (ep->nxlx > 0) {
+			hymod_xlx_t *xp;
+
+			if (ep->nxlx == 1) {
+				xp = &ep->xlx[0];
+				printf (", Xilinx %s FPGA (%s/%s/%s)",
+					xlxtyp_vals[xp->type],
+					xlxspd_vals[xp->speed],
+					xlxtmp_vals[xp->temp],
+					xlxgrd_vals[xp->grade]);
+			}
+			else {
+				printf (", %d Xilinx FPGAs (", ep->nxlx);
+				for (i = 0; i < ep->nxlx; i++) {
+					xp = &ep->xlx[i];
+					printf ("%s[%s/%s/%s]%s",
+					    xlxtyp_vals[xp->type],
+					    xlxspd_vals[xp->speed],
+					    xlxtmp_vals[xp->temp],
+					    xlxgrd_vals[xp->grade],
+					    (i == ep->nxlx - 1) ? ")" : ", ");
+				}
+			}
 		}
-	    }
+		else
+			puts(", NO FPGAs");
+
+		puts ("\n");
+
+		if (ep->hss.type > 0)
+			printf ("         High Speed Serial: "
+				"%s, %d input%s, %d output%s\n",
+				hstype_vals[ep->hss.type],
+				ep->hss.nchin,
+				(ep->hss.nchin == 1 ? "" : "s"),
+				ep->hss.nchout,
+				(ep->hss.nchout == 1 ? "" : "s"));
+		break;
+
+	case HYMOD_BDTYPE_INPUT:
+	case HYMOD_BDTYPE_ALTINPUT:
+	case HYMOD_BDTYPE_DISPLAY:
+		break;
+
+	default:
+		/* crap! */
+		printf ("         UNKNOWN BOARD TYPE: %d\n", ep->bdtype);
+		break;
+	}
+}
+
+int
+hymod_eeprom_read (int which, hymod_eeprom_t *ep)
+{
+	char *label = which ? "mezzanine" : "main";
+	unsigned dev_addr = CFG_I2C_EEPROM_ADDR | \
+		(which ? HYMOD_EEOFF_MEZZ : HYMOD_EEOFF_MAIN);
+	char filename[50], prompt[50], *dir;
+	int serno, count = 0, rc;
+
+	rc = eeprom_probe (dev_addr, 0);
+
+	if (rc > 0) {
+		printf ("*** probe for eeprom failed with code %d\n", rc);
+		return (0);
+	}
+
+	if (rc < 0)
+		return (rc);
+
+	sprintf (prompt, "Enter %s board serial number: ", label);
+
+	if ((dir = getenv ("bddb_cfgdir")) == NULL)
+		dir = def_bddb_cfgdir;
+
+	for (;;) {
+		int rc;
+
+		if (hymod_eeprom_load (which, ep))
+			return (1);
+
+		printf ("*** %s board EEPROM contents are %sinvalid\n",
+			label, count == 0 ? "" : "STILL ");
+
+		puts ("*** will fetch from server (Ctrl-C to abort)\n");
+
+		serno = hymod_get_serno (prompt);
+
+		if (serno < 0) {
+			if (serno == -1)
+				puts ("\n*** interrupted!");
+			else
+				puts ("\n*** timeout!");
+			puts (" - ignoring eeprom contents\n");
+			return (0);
+		}
+
+		sprintf (filename, "%s/%010d.cfg", dir, serno);
+
+		printf ("*** fetching %s board EEPROM contents from server\n",
+			label);
+
+		rc = hymod_eeprom_fetch (which, filename, CFG_LOAD_ADDR);
+
+		if (rc == 0) {
+			puts ("*** fetch failed - ignoring eeprom contents\n");
+			return (0);
+		}
+
+		count++;
 	}
-	else
-	    puts(", NO FPGAs");
-
-	puts("\n");
-
-	if (ep->hss.type > 0)
-	    printf("         High Speed Serial: %s, %d input%s, %d output%s\n",
-		hstype_vals[ep->hss.type],
-		ep->hss.nchin, (ep->hss.nchin == 1 ? "" : "s"),
-		ep->hss.nchout, (ep->hss.nchout == 1 ? "" : "s"));
-	break;
-
-    case HYMOD_BDTYPE_INPUT:
-    case HYMOD_BDTYPE_ALTINPUT:
-    case HYMOD_BDTYPE_DISPLAY:
-	break;
-
-    default:
-	/* crap! */
-	printf("         UNKNOWN BOARD TYPE: %d\n", ep->bdtype);
-	break;
-    }
 }
diff --git a/board/hymod/env.c b/board/hymod/env.c
new file mode 100644
index 0000000..f58aec2
--- /dev/null
+++ b/board/hymod/env.c
@@ -0,0 +1,236 @@
+/*
+ * (C) Copyright 2003
+ * Murray Jensen, CSIRO-MIT, <Murray.Jensen@csiro.au>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/* imports from fetch.c */
+extern int fetch_and_parse (char *, ulong, int (*)(uchar *, uchar *));
+
+/* this is relative to the root of the server's tftp directory */
+static char *def_global_env_path = "/hymod/global_env";
+
+static int
+env_callback (uchar *name, uchar *value)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	hymod_conf_t *cp = &gd->bd->bi_hymod_conf;
+	char ov[CFG_CBSIZE], nv[CFG_CBSIZE], *p, *q, *nn, c, *curver, *newver;
+	int override = 1, append = 0, remove = 0, nnl, ovl, nvl;
+
+	nn = name;
+
+	if (*nn == '-') {
+		override = 0;
+		nn++;
+	}
+
+	while (*nn == ' ' || *nn == '\t')
+		nn++;
+
+	if ((nnl = strlen (nn)) == 0) {
+		printf ("Empty name in global env file\n");
+		return (0);
+	}
+
+	if ((c = nn[nnl - 1]) == '+' || c == '-') {
+		if (c == '+')
+			append = 1;
+		else
+			remove = 1;
+		nn[--nnl] = '\0';
+	}
+
+	while (nnl > 0 && ((c = nn[nnl - 1]) == ' ' || c == '\t'))
+		nn[--nnl] = '\0';
+	if (nnl == 0) {
+		printf ("Empty name in global env file\n");
+		return (0);
+	}
+
+	p = value;
+	q = nv;
+
+	while ((c = *p) == ' ' || c == '\t')
+		p++;
+
+	nvl = strlen (p);
+	while (nvl > 0 && ((c = p[nvl - 1]) == ' ' || c == '\t'))
+		p[--nvl] = '\0';
+
+	while ((*q = *p++) != '\0') {
+		if (*q == '%') {
+			switch (*p++) {
+
+			case '\0':	/* whoops - back up */
+				p--;
+				break;
+
+			case '%':	/* a single percent character */
+				q++;
+				break;
+
+			case 's':	/* main board serial number as string */
+				q += sprintf (q, "%010lu",
+					cp->main.eeprom.serno);
+				break;
+
+			case 'S':	/* main board serial number as number */
+				q += sprintf (q, "%lu", cp->main.eeprom.serno);
+				break;
+
+			default:	/* ignore any others */
+				break;
+			}
+		}
+		else
+			q++;
+	}
+
+	if ((nvl = q - nv) == 0) {
+		setenv (nn, NULL);
+		return (1);
+	}
+
+	if ((curver = getenv ("global_env_version")) == NULL)
+		curver = "unknown";
+
+	if ((newver = getenv ("new_genv_version")) == NULL || \
+	    strcmp (curver, newver) == 0) {
+		if (strcmp (nn, "version") == 0)
+			setenv ("new_genv_version", nv);
+		return (1);
+	}
+
+	if ((p = getenv (nn)) != NULL) {
+
+		strcpy (ov, p);
+		ovl = strlen (ov);
+
+		if (append) {
+
+			if (strstr (ov, nv) == NULL) {
+
+				printf ("Appending '%s' to env var '%s'\n",
+					nv, nn);
+
+				while (nvl >= 0) {
+					nv[ovl + 1 + nvl] = nv[nvl];
+					nvl--;
+				}
+
+				nv[ovl] = ' ';
+
+				while (--ovl >= 0)
+					nv[ovl] = ov[ovl];
+
+				setenv (nn, nv);
+			}
+
+			return (1);
+		}
+
+		if (remove) {
+
+			if (strstr (ov, nv) != NULL) {
+
+				printf ("Removing '%s' from env var '%s'\n",
+					nv, nn);
+
+				while ((p = strstr (ov, nv)) != NULL) {
+					q = p + nvl;
+					if (*q == ' ')
+						q++;
+					strcpy(p, q);
+				}
+
+				setenv (nn, ov);
+			}
+
+			return (1);
+		}
+
+		if (!override || strcmp (ov, nv) == 0)
+			return (1);
+
+		printf ("Re-setting env cmd '%s' from '%s' to '%s'\n",
+			nn, ov, nv);
+	}
+	else
+		printf ("Setting env cmd '%s' to '%s'\n", nn, nv);
+
+	setenv (nn, nv);
+	return (1);
+}
+
+void
+hymod_check_env (void)
+{
+	char *p, *path, *curver, *newver;
+	int firsttime = 0, needsave = 0;
+
+	if (getenv ("global_env_loaded") == NULL) {
+		puts ("*** global environment has never been loaded\n");
+		puts ("*** fetching from server");
+		firsttime = 1;
+	}
+	else if ((p = getenv ("always_check_env")) != NULL &&
+	    strcmp (p, "yes") == 0)
+		puts ("*** checking for updated global environment");
+	else
+		return;
+
+	puts (" (Control-C to Abort)\n");
+
+	if ((path = getenv ("global_env_path")) == NULL || *path == '\0')
+		path = def_global_env_path;
+
+	if (fetch_and_parse (path, CFG_LOAD_ADDR, env_callback) == 0) {
+		puts ("*** Fetch of global environment failed!\n");
+		return;
+	}
+
+	if ((newver = getenv ("new_genv_version")) == NULL) {
+		puts ("*** Version number not set - contents ignored!\n");
+		return;
+	}
+
+	if ((curver = getenv ("global_env_version")) == NULL || \
+	    strcmp (curver, newver) != 0) {
+		setenv ("global_env_version", newver);
+		needsave = 1;
+	}
+	else
+		printf ("*** Global environment up-to-date (ver %s)\n", curver);
+
+	setenv ("new_genv_version", NULL);
+
+	if (firsttime) {
+		setenv ("global_env_loaded", "yes");
+		needsave = 1;
+	}
+
+	if (needsave)
+		puts ("\n*** Remember to run the 'saveenv' "
+			"command to save the changes\n\n");
+}
diff --git a/board/hymod/fetch.c b/board/hymod/fetch.c
index dcbda31..e121d55 100644
--- a/board/hymod/fetch.c
+++ b/board/hymod/fetch.c
@@ -1,7 +1,6 @@
 /*
  * (C) Copyright 2001
- * Murray Jensen, CSIRO Manufacturing Science and Technology,
- * <Murray.Jensen@cmst.csiro.au>
+ * Murray Jensen, CSIRO-MIT, <Murray.Jensen@csiro.au>
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -25,118 +24,84 @@
 #include <common.h>
 #include <net.h>
 
-/* imports from common/main.c */
-extern char console_buffer[CFG_CBSIZE];
+/* imports from input.c */
+extern int hymod_get_ethaddr (void);
 
 int
-fetch_and_parse(bd_t *bd, char *fn, ulong addr, int (*cback)(uchar *, uchar *))
+fetch_and_parse (char *fn, ulong addr, int (*cback)(uchar *, uchar *))
 {
-    char *ethaddr;
-    uchar *fp, *efp;
-
-    while ((ethaddr = getenv("ethaddr")) == NULL || *ethaddr == '\0') {
-
-	puts("*** Ethernet address is not set\n");
-
-	for (;;) {
-	    int n;
-
-	    n = readline("Enter board ethernet address: ");
-
-	    if (n < 0) {
-		puts("\n");
-		return (0);
-	    }
-
-	    if (n == 0)
-		continue;
-
-	    if (n == 17) {
-		int i;
-		char *p, *q;
-		uchar ea[6];
-
-		/* see if it looks like an ethernet address */
-
-		p = console_buffer;
-
-		for (i = 0; i < 6; i++) {
-		    char term = (i == 5 ? '\0' : ':');
-
-		    ea[i] = simple_strtol(p, &q, 16);
-
-		    if ((q - p) != 2 || *q++ != term)
-			break;
-
-		    p = q;
+	char *ethaddr;
+	uchar *fp, *efp;
+	int rc, count = 0;
+
+	while ((ethaddr = getenv ("ethaddr")) == NULL || *ethaddr == '\0') {
+
+		printf ("*** Ethernet address is%s not set\n",
+			count == 0 ? "" : " STILL");
+
+		if ((rc = hymod_get_ethaddr ()) < 0) {
+			if (rc == -1)
+				puts ("\n*** interrupted!");
+			else
+				puts ("\n*** timeout!");
+			printf (" - fetch of '%s' aborted\n", fn);
+			return (0);
 		}
 
-		if (i == 6) {
-		    /* it looks ok - set it */
-		    printf("Setting ethernet address to %s\n", console_buffer);
-		    setenv("ethaddr", console_buffer);
-
-		    puts("Remember to do a 'saveenv' to make it permanent\n");
-		    break;
-		}
-	    }
-
-	    printf("Invalid ethernet address (%s) - please re-enter\n",
-		console_buffer);
+		count++;
 	}
-    }
-
-    copy_filename(BootFile, fn, sizeof (BootFile));
-    load_addr = addr;
 
-    if (NetLoop(TFTP) <= 0) {
-	printf("tftp transfer of file '%s' failed\n", fn);
-	return (0);
-    }
+	copy_filename (BootFile, fn, sizeof (BootFile));
+	load_addr = addr;
+	NetBootFileXferSize = 0;
 
-    if (NetBootFileXferSize == 0) {
-	printf("can't determine size of file '%s'\n", fn);
-	return (0);
-    }
-
-    fp = (uchar *)load_addr;
-    efp = fp + NetBootFileXferSize;
-
-    do {
-	uchar *name, *value;
-
-	if (*fp == '#' || *fp == '\n') {
-	    while (fp < efp && *fp++ != '\n')
-		;
-	    continue;
+	if (NetLoop (TFTP) == 0) {
+		printf ("tftp transfer of file '%s' failed\n", fn);
+		return (0);
 	}
 
-	name = fp;
+	if (NetBootFileXferSize == 0) {
+		printf ("can't determine size of file '%s'\n", fn);
+		return (0);
+	}
 
-	while (fp < efp && *fp != '=')
-	    if (*fp++ == '\n')
-		name = fp;
+	fp = (uchar *)load_addr;
+	efp = fp + NetBootFileXferSize;
 
-	if (fp >= efp)
-	    break;
+	do {
+		uchar *name, *value;
 
-	*fp++ = '\0';
+		if (*fp == '#' || *fp == '\n') {
+			/* skip this line */
+			while (fp < efp && *fp++ != '\n')
+				;
+			continue;
+		}
 
-	value = fp;
+		name = fp;
 
-	while (fp < efp && *fp != '\n')
-	    fp++;
+		while (fp < efp && *fp != '=' && *fp != '\n')
+			fp++;
+		if (fp >= efp)
+			break;
+		if (*fp == '\n') {
+			fp++;
+			continue;
+		}
+		*fp++ = '\0';
 
-	/* ok if we go off the end here */
+		value = fp;
 
-	if (fp[-1] == '\r')
-	    fp[-1] = '\0';
-	*fp++ = '\0';
+		while (fp < efp && *fp != '\n')
+			fp++;
+		if (fp[-1] == '\r')
+			fp[-1] = '\0';
+		*fp++ = '\0';	/* ok if we go off the end here */
 
-	if ((*cback)(name, value) == 0)
-	    return (0);
+		if ((*cback)(name, value) == 0)
+			return (0);
 
-    } while (fp < efp);
+	} while (fp < efp);
 
-    return (1);
+	return (1);
 }
diff --git a/board/hymod/flash.c b/board/hymod/flash.c
index 0a09b4a..7d1ae30 100644
--- a/board/hymod/flash.c
+++ b/board/hymod/flash.c
@@ -20,7 +20,7 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  * MA 02111-1307 USA
  *
- * Hacked for the Hymod board by Murray.Jensen@cmst.csiro.au, 20-Oct-00
+ * Hacked for the Hymod board by Murray.Jensen@csiro.au, 20-Oct-00
  */
 
 #include <common.h>
@@ -36,234 +36,154 @@ flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info for FLASH chips */
 #define FLAG_PROTECT_CLEAR	0x02
 
 /*-----------------------------------------------------------------------
- * Functions
- */
-#if 0
-static ulong flash_get_size (vu_long *addr, flash_info_t *info);
-static void flash_get_offsets (ulong base, flash_info_t *info);
-#endif
-static int write_word (flash_info_t *info, ulong dest, ulong data);
-
-/*-----------------------------------------------------------------------
  */
 
 /*
- * probe for the existence of flash at bank word address "addr"
- * 0 = yes, 1 = bad Manufacturer's Id, 2 = bad Device Id
+ * probe for flash bank at address "base" and store info about it
+ * in the flash_info entry "fip". Fatal error if nothing there.
  */
-static int
-bank_probe_word(bank_addr_t addr)
+static void
+bank_probe (flash_info_t *fip, bank_addr_t base)
 {
-	int retval;
+	bank_addr_t addr;
+	bank_word_t word;
+	int i;
 
 	/* reset the flash */
-	*addr = BANK_CMD_RST;
+	*base = BANK_CMD_RST;
 
-	/* check the manufacturer id */
-	*addr = BANK_CMD_RD_ID;
-	if (*BANK_ADDR_REG_MAN(addr) != BANK_RD_ID_MAN) {
-		retval = -1;
-		goto out;
-	}
-
-	/* check the device id */
-	*addr = BANK_CMD_RD_ID;
-	if (*BANK_ADDR_REG_DEV(addr) != BANK_RD_ID_DEV) {
-		retval = -2;
-		goto out;
-	}
+	/* check the manufacturer id - must be intel */
+	*base = BANK_CMD_RD_ID;
+	word = *BANK_REG_MAN_CODE (base);
+	*base = BANK_CMD_RST;
 
-	retval = CFG_FLASH_TYPE;
+	if (word != BANK_FILL_WORD (INTEL_MANUFACT&0xff))
+		panic ("\nbad manufacturer's code (0x%08lx) at addr 0x%08lx",
+			(unsigned long)word, (unsigned long)base);
 
-out:
-	/* reset the flash again */
-	*addr = BANK_CMD_RST;
-
-	return retval;
-}
+	/* check the device id */
+	*base = BANK_CMD_RD_ID;
+	word = *BANK_REG_DEV_CODE (base);
+	*base = BANK_CMD_RST;
 
-/*
- * probe for flash banks at address "base" and store info for any found
- * into flash_info entry "fip". Must find at least one bank.
- */
-static void
-bank_probe(flash_info_t *fip, bank_addr_t base)
-{
-	bank_addr_t addr, eaddr;
-	int nbanks;
+	switch (word) {
 
-	fip->flash_id = FLASH_UNKNOWN;
-	fip->size = 0L;
-	fip->sector_count = 0;
+	case BANK_FILL_WORD (INTEL_ID_28F320J5&0xff):
+		fip->flash_id = FLASH_MAN_INTEL | FLASH_28F320J5;
+		fip->sector_count = 32;
+		break;
 
-	addr = base;
-	eaddr = BANK_ADDR_BASE(addr, MAX_BANKS);
-	nbanks = 0;
+	case BANK_FILL_WORD (INTEL_ID_28F640J5&0xff):
+		fip->flash_id = FLASH_MAN_INTEL | FLASH_28F640J5;
+		fip->sector_count = 64;
+		break;
 
-	while (addr < eaddr) {
-		bank_addr_t addrw, eaddrw, addrb;
-		int i, osc, nsc, curtype = -1;
+	case BANK_FILL_WORD (INTEL_ID_28F320J3A&0xff):
+		fip->flash_id = FLASH_MAN_INTEL | FLASH_28F320J3A;
+		fip->sector_count = 32;
+		break;
 
-		addrw = addr;
-		eaddrw = BANK_ADDR_NEXT_WORD(addrw);
+	case BANK_FILL_WORD (INTEL_ID_28F640J3A&0xff):
+		fip->flash_id = FLASH_MAN_INTEL | FLASH_28F640J3A;
+		fip->sector_count = 64;
+		break;
 
-		while (addrw < eaddrw) {
-			int thistype;
+	case BANK_FILL_WORD (INTEL_ID_28F128J3A&0xff):
+		fip->flash_id = FLASH_MAN_INTEL | FLASH_28F128J3A;
+		fip->sector_count = 128;
+		break;
 
-#ifdef FLASH_DEBUG
-			printf("  probing for flash at addr 0x%08lx\n",
-				(unsigned long)addrw);
-#endif
-			if ((thistype = bank_probe_word(addrw++)) < 0)
-				goto out;
-
-			if (curtype < 0)
-				curtype = thistype;
-			else {
-				if (thistype != curtype) {
-					printf("Differing flash type found!\n");
-					goto out;
-				}
-			}
-		}
+	default:
+		panic ("\nbad device code (0x%08lx) at addr 0x%08lx",
+			(unsigned long)word, (unsigned long)base);
+	}
 
-		if (curtype < 0)
-			goto out;
-
-		/* bank exists - append info for this bank to *fip */
-		fip->flash_id = FLASH_MAN_INTEL|curtype;
-		fip->size += BANK_SIZE;
-		osc = fip->sector_count;
-		fip->sector_count += BANK_NBLOCKS;
-		if ((nsc = fip->sector_count) >= CFG_MAX_FLASH_SECT)
-			panic("Too many sectors in flash at address 0x%08lx\n",
-				(unsigned long)base);
-
-		addrb = addr;
-		for (i = osc; i < nsc; i++) {
-			fip->start[i] = (ulong)addrb;
-			fip->protect[i] = 0;
-			addrb = BANK_ADDR_NEXT_BLK(addrb);
-		}
+	if (fip->sector_count >= CFG_MAX_FLASH_SECT)
+		panic ("\ntoo many sectors (%d) in flash at address 0x%08lx",
+			fip->sector_count, (unsigned long)base);
 
-		addr = BANK_ADDR_NEXT_BANK(addr);
-		nbanks++;
+	addr = base;
+	for (i = 0; i < fip->sector_count; i++) {
+		fip->start[i] = (unsigned long)addr;
+		fip->protect[i] = 0;
+		addr = BANK_ADDR_NEXT_BLK (addr);
 	}
 
-out:
-	if (nbanks == 0)
-		panic("ERROR: no flash found at address 0x%08lx\n",
-			(unsigned long)base);
+	fip->size = (bank_size_t)addr - (bank_size_t)base;
 }
 
 static void
-bank_reset(flash_info_t *info, int sect)
+bank_reset (flash_info_t *info, int sect)
 {
-	bank_addr_t addrw, eaddrw;
+	bank_addr_t addr = (bank_addr_t)info->start[sect];
 
-	addrw = (bank_addr_t)info->start[sect];
-	eaddrw = BANK_ADDR_NEXT_WORD(addrw);
-
-	while (addrw < eaddrw) {
 #ifdef FLASH_DEBUG
-		printf("  writing reset cmd to addr 0x%08lx\n",
-			(unsigned long)addrw);
+	printf ("writing reset cmd to addr 0x%08lx\n", (unsigned long)addr);
 #endif
-		*addrw = BANK_CMD_RST;
-		addrw++;
-	}
+
+	*addr = BANK_CMD_RST;
 }
 
 static void
-bank_erase_init(flash_info_t *info, int sect)
+bank_erase_init (flash_info_t *info, int sect)
 {
-	bank_addr_t addrw, saddrw, eaddrw;
+	bank_addr_t addr = (bank_addr_t)info->start[sect];
 	int flag;
 
 #ifdef FLASH_DEBUG
-	printf("0x%08lx BANK_CMD_PROG\n", BANK_CMD_PROG);
-	printf("0x%08lx BANK_CMD_ERASE1\n", BANK_CMD_ERASE1);
-	printf("0x%08lx BANK_CMD_ERASE2\n", BANK_CMD_ERASE2);
-	printf("0x%08lx BANK_CMD_CLR_STAT\n", BANK_CMD_CLR_STAT);
-	printf("0x%08lx BANK_CMD_RST\n", BANK_CMD_RST);
-	printf("0x%08lx BANK_STAT_RDY\n", BANK_STAT_RDY);
-	printf("0x%08lx BANK_STAT_ERR\n", BANK_STAT_ERR);
-#endif
-
-	saddrw = (bank_addr_t)info->start[sect];
-	eaddrw = BANK_ADDR_NEXT_WORD(saddrw);
-
-#ifdef FLASH_DEBUG
-	printf("erasing sector %d, start addr = 0x%08lx "
-		"(bank next word addr = 0x%08lx)\n", sect,
-		(unsigned long)saddrw, (unsigned long)eaddrw);
+	printf ("erasing sector %d, addr = 0x%08lx\n",
+		sect, (unsigned long)addr);
 #endif
 
 	/* Disable intrs which might cause a timeout here */
-	flag = disable_interrupts();
+	flag = disable_interrupts ();
 
-	for (addrw = saddrw; addrw < eaddrw; addrw++) {
 #ifdef FLASH_DEBUG
-		printf("  writing erase cmd to addr 0x%08lx\n",
-			(unsigned long)addrw);
+	printf ("writing erase cmd to addr 0x%08lx\n", (unsigned long)addr);
 #endif
-		*addrw = BANK_CMD_ERASE1;
-		*addrw = BANK_CMD_ERASE2;
-	}
+	*addr = BANK_CMD_ERASE1;
+	*addr = BANK_CMD_ERASE2;
 
 	/* re-enable interrupts if necessary */
 	if (flag)
-		enable_interrupts();
+		enable_interrupts ();
 }
 
 static int
-bank_erase_poll(flash_info_t *info, int sect)
+bank_erase_poll (flash_info_t *info, int sect)
 {
-	bank_addr_t addrw, saddrw, eaddrw;
-	int sectdone, haderr;
-
-	saddrw = (bank_addr_t)info->start[sect];
-	eaddrw = BANK_ADDR_NEXT_WORD(saddrw);
-
-	sectdone = 1;
-	haderr = 0;
-
-	for (addrw = saddrw; addrw < eaddrw; addrw++) {
-		bank_word_t stat = *addrw;
+	bank_addr_t addr = (bank_addr_t)info->start[sect];
+	bank_word_t stat = *addr;
 
 #ifdef FLASH_DEBUG
-		printf("  checking status at addr "
-			"0x%08lx [0x%08lx]\n",
-			(unsigned long)addrw, stat);
+	printf ("checking status at addr 0x%08lx [0x%08lx]\n",
+		(unsigned long)addr, (unsigned long)stat);
 #endif
-		if ((stat & BANK_STAT_RDY) != BANK_STAT_RDY)
-			sectdone = 0;
-		else if ((stat & BANK_STAT_ERR) != 0) {
-			printf(" failed on sector %d "
-				"(stat = 0x%08lx) at "
-				"address 0x%08lx\n",
-				sect, stat,
-				(unsigned long)addrw);
-			*addrw = BANK_CMD_CLR_STAT;
-			haderr = 1;
+
+	if ((stat & BANK_STAT_RDY) == BANK_STAT_RDY) {
+		if ((stat & BANK_STAT_ERR) != 0) {
+			printf ("failed on sector %d [0x%08lx] at "
+				"address 0x%08lx\n", sect,
+				(unsigned long)stat, (unsigned long)addr);
+			*addr = BANK_CMD_CLR_STAT;
+			return (-1);
 		}
+		else
+			return (1);
 	}
-
-	if (haderr)
-		return (-1);
 	else
-		return (sectdone);
+		return (0);
 }
 
 static int
-bank_write_word(bank_addr_t addr, bank_word_t value)
+bank_write_word (bank_addr_t addr, bank_word_t value)
 {
 	bank_word_t stat;
 	ulong start;
 	int flag, retval;
 
 	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts();
+	flag = disable_interrupts ();
 
 	*addr = BANK_CMD_PROG;
 
@@ -271,14 +191,14 @@ bank_write_word(bank_addr_t addr, bank_word_t value)
 
 	/* re-enable interrupts if necessary */
 	if (flag)
-		enable_interrupts();
+		enable_interrupts ();
 
 	retval = 0;
 
 	/* data polling for D7 */
 	start = get_timer (0);
 	do {
-		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
 			retval = 1;
 			goto done;
 		}
@@ -286,8 +206,8 @@ bank_write_word(bank_addr_t addr, bank_word_t value)
 	} while ((stat & BANK_STAT_RDY) != BANK_STAT_RDY);
 
 	if ((stat & BANK_STAT_ERR) != 0) {
-		printf("flash program failed (stat = 0x%08lx) "
-			"at address 0x%08lx\n", (ulong)stat, (ulong)addr);
+		printf ("flash program failed [0x%08lx] at address 0x%08lx\n",
+			(unsigned long)stat, (unsigned long)addr);
 		*addr = BANK_CMD_CLR_STAT;
 		retval = 3;
 	}
@@ -303,7 +223,7 @@ done:
  */
 
 unsigned long
-flash_init(void)
+flash_init (void)
 {
 	int i;
 
@@ -312,21 +232,21 @@ flash_init(void)
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}
 
-	bank_probe(&flash_info[0], (bank_addr_t)CFG_FLASH_BASE);
+	bank_probe (&flash_info[0], (bank_addr_t)CFG_FLASH_BASE);
 
 	/*
 	 * protect monitor and environment sectors
 	 */
 
 #if CFG_MONITOR_BASE == CFG_FLASH_BASE
-	(void)flash_protect(FLAG_PROTECT_SET,
+	(void)flash_protect (FLAG_PROTECT_SET,
 		      CFG_MONITOR_BASE,
 		      CFG_MONITOR_BASE+monitor_flash_len-1,
 		      &flash_info[0]);
 #endif
 
 #if defined(CFG_FLASH_ENV_ADDR)
-	(void)flash_protect(FLAG_PROTECT_SET,
+	(void)flash_protect (FLAG_PROTECT_SET,
 		      CFG_FLASH_ENV_ADDR,
 #if defined(CFG_FLASH_ENV_BUF)
 		      CFG_FLASH_ENV_ADDR + CFG_FLASH_ENV_BUF - 1,
@@ -341,40 +261,8 @@ flash_init(void)
 
 /*-----------------------------------------------------------------------
  */
-#if 0
-static void
-flash_get_offsets(ulong base, flash_info_t *info)
-{
-	int i;
-
-	/* set up sector start adress table */
-	if (info->flash_id & FLASH_BTYPE) {
-		/* set sector offsets for bottom boot block type	*/
-		info->start[0] = base + 0x00000000;
-		info->start[1] = base + 0x00008000;
-		info->start[2] = base + 0x0000C000;
-		info->start[3] = base + 0x00010000;
-		for (i = 4; i < info->sector_count; i++) {
-			info->start[i] = base + (i * 0x00020000) - 0x00060000;
-		}
-	} else {
-		/* set sector offsets for top boot block type		*/
-		i = info->sector_count - 1;
-		info->start[i--] = base + info->size - 0x00008000;
-		info->start[i--] = base + info->size - 0x0000C000;
-		info->start[i--] = base + info->size - 0x00010000;
-		for (; i >= 0; i--) {
-			info->start[i] = base + i * 0x00020000;
-		}
-	}
-
-}
-#endif	/* 0 */
-
-/*-----------------------------------------------------------------------
- */
 void
-flash_print_info(flash_info_t *info)
+flash_print_info (flash_info_t *info)
 {
 	int i;
 
@@ -391,6 +279,14 @@ flash_print_info(flash_info_t *info)
 	switch (info->flash_id & FLASH_TYPEMASK) {
 	case FLASH_28F320J5:	printf ("28F320J5 (32 Mbit, 2 x 16bit)\n");
 				break;
+	case FLASH_28F640J5:	printf ("28F640J5 (64 Mbit, 2 x 16bit)\n");
+				break;
+	case FLASH_28F320J3A:	printf ("28F320J3A (32 Mbit, 2 x 16bit)\n");
+				break;
+	case FLASH_28F640J3A:	printf ("28F640J3A (64 Mbit, 2 x 16bit)\n");
+				break;
+	case FLASH_28F128J3A:	printf ("28F320J3A (128 Mbit, 2 x 16bit)\n");
+				break;
 	default:		printf ("Unknown Chip Type\n");
 				break;
 	}
@@ -411,157 +307,25 @@ flash_print_info(flash_info_t *info)
 	return;
 }
 
-/*-----------------------------------------------------------------------
- */
-
 /*
  * The following code cannot be run from FLASH!
  */
-#if 0
-static ulong
-flash_get_size(vu_long *addr, flash_info_t *info)
-{
-	short i;
-	ulong value;
-	ulong base = (ulong)addr;
-
-
-	/* Write auto select command: read Manufacturer ID */
-	addr[0x0555] = 0x00AA00AA;
-	addr[0x02AA] = 0x00550055;
-	addr[0x0555] = 0x00900090;
-
-	value = addr[0];
-
-	switch (value) {
-	case AMD_MANUFACT:
-		info->flash_id = FLASH_MAN_AMD;
-		break;
-	case FUJ_MANUFACT:
-		info->flash_id = FLASH_MAN_FUJ;
-		break;
-	default:
-		info->flash_id = FLASH_UNKNOWN;
-		info->sector_count = 0;
-		info->size = 0;
-		return (0);			/* no or unknown flash	*/
-	}
-
-	value = addr[1];			/* device ID		*/
-
-	switch (value) {
-	case AMD_ID_LV400T:
-		info->flash_id += FLASH_AM400T;
-		info->sector_count = 11;
-		info->size = 0x00100000;
-		break;				/* => 1 MB		*/
-
-	case AMD_ID_LV400B:
-		info->flash_id += FLASH_AM400B;
-		info->sector_count = 11;
-		info->size = 0x00100000;
-		break;				/* => 1 MB		*/
-
-	case AMD_ID_LV800T:
-		info->flash_id += FLASH_AM800T;
-		info->sector_count = 19;
-		info->size = 0x00200000;
-		break;				/* => 2 MB		*/
-
-	case AMD_ID_LV800B:
-		info->flash_id += FLASH_AM800B;
-		info->sector_count = 19;
-		info->size = 0x00200000;
-		break;				/* => 2 MB		*/
-
-	case AMD_ID_LV160T:
-		info->flash_id += FLASH_AM160T;
-		info->sector_count = 35;
-		info->size = 0x00400000;
-		break;				/* => 4 MB		*/
-
-	case AMD_ID_LV160B:
-		info->flash_id += FLASH_AM160B;
-		info->sector_count = 35;
-		info->size = 0x00400000;
-		break;				/* => 4 MB		*/
-#if 0	/* enable when device IDs are available */
-	case AMD_ID_LV320T:
-		info->flash_id += FLASH_AM320T;
-		info->sector_count = 67;
-		info->size = 0x00800000;
-		break;				/* => 8 MB		*/
-
-	case AMD_ID_LV320B:
-		info->flash_id += FLASH_AM320B;
-		info->sector_count = 67;
-		info->size = 0x00800000;
-		break;				/* => 8 MB		*/
-#endif
-	default:
-		info->flash_id = FLASH_UNKNOWN;
-		return (0);			/* => no or unknown flash */
-
-	}
-
-	/* set up sector start adress table */
-	if (info->flash_id & FLASH_BTYPE) {
-		/* set sector offsets for bottom boot block type	*/
-		info->start[0] = base + 0x00000000;
-		info->start[1] = base + 0x00008000;
-		info->start[2] = base + 0x0000C000;
-		info->start[3] = base + 0x00010000;
-		for (i = 4; i < info->sector_count; i++) {
-			info->start[i] = base + (i * 0x00020000) - 0x00060000;
-		}
-	} else {
-		/* set sector offsets for top boot block type		*/
-		i = info->sector_count - 1;
-		info->start[i--] = base + info->size - 0x00008000;
-		info->start[i--] = base + info->size - 0x0000C000;
-		info->start[i--] = base + info->size - 0x00010000;
-		for (; i >= 0; i--) {
-			info->start[i] = base + i * 0x00020000;
-		}
-	}
-
-	/* check for protected sectors */
-	for (i = 0; i < info->sector_count; i++) {
-		/* read sector protection at sector address, (A7 .. A0) = 0x02 */
-		/* D0 = 1 if protected */
-		addr = (volatile unsigned long *)(info->start[i]);
-		info->protect[i] = addr[2] & 1;
-	}
-
-	/*
-	 * Prevent writes to uninitialized FLASH.
-	 */
-	if (info->flash_id != FLASH_UNKNOWN) {
-		addr = (volatile unsigned long *)info->start[0];
-
-		*addr = 0x00F000F0;	/* reset bank */
-	}
-
-	return (info->size);
-}
-#endif /* 0 */
-
 
 /*-----------------------------------------------------------------------
  */
 
 int
-flash_erase(flash_info_t *info, int s_first, int s_last)
+flash_erase (flash_info_t *info, int s_first, int s_last)
 {
 	int prot, sect, haderr;
 	ulong start, now, last;
 	int rcode = 0;
 
 #ifdef FLASH_DEBUG
-	printf("\nflash_erase: erase %d sectors (%d to %d incl.) from\n"
+	printf ("\nflash_erase: erase %d sectors (%d to %d incl.) from\n"
 		"  Bank # %d: ", s_last - s_first + 1, s_first, s_last,
 		(info - flash_info) + 1);
-	flash_print_info(info);
+	flash_print_info (info);
 #endif
 
 	if ((s_first < 0) || (s_first > s_last)) {
@@ -574,14 +338,14 @@ flash_erase(flash_info_t *info, int s_first, int s_last)
 	}
 
 	prot = 0;
-	for (sect=s_first; sect<=s_last; ++sect) {
+	for (sect = s_first; sect <= s_last; ++sect) {
 		if (info->protect[sect]) {
 			prot++;
 		}
 	}
 
 	if (prot) {
-		printf("- Warning: %d protected sector%s will not be erased!\n",
+		printf ("- Warning: %d protected sector%s will not be erased\n",
 			prot, (prot > 1 ? "s" : ""));
 	}
 
@@ -594,15 +358,15 @@ flash_erase(flash_info_t *info, int s_first, int s_last)
 			ulong estart;
 			int sectdone;
 
-			bank_erase_init(info, sect);
+			bank_erase_init (info, sect);
 
 			/* wait at least 80us - let's wait 1 ms */
 			udelay (1000);
 
-			estart = get_timer(start);
+			estart = get_timer (start);
 
 			do {
-				now = get_timer(start);
+				now = get_timer (start);
 
 				if (now - estart > CFG_FLASH_ERASE_TOUT) {
 					printf ("Timeout (sect %d)\n", sect);
@@ -619,7 +383,7 @@ flash_erase(flash_info_t *info, int s_first, int s_last)
 				}
 #endif
 
-				sectdone = bank_erase_poll(info, sect);
+				sectdone = bank_erase_poll (info, sect);
 
 				if (sectdone < 0) {
 					haderr = 1;
@@ -642,21 +406,39 @@ flash_erase(flash_info_t *info, int s_first, int s_last)
 	/* reset to read mode */
 	for (sect = s_first; sect <= s_last; sect++) {
 		if (info->protect[sect] == 0) {	/* not protected */
-			bank_reset(info, sect);
+			bank_reset (info, sect);
 		}
 	}
 	return rcode;
 }
 
 /*-----------------------------------------------------------------------
+ * Write a word to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ * 3 - Program failed
+ */
+static int
+write_word (flash_info_t *info, ulong dest, ulong data)
+{
+	/* Check if Flash is (sufficiently) erased */
+	if ((*(ulong *)dest & data) != data)
+		return (2);
+
+	return (bank_write_word ((bank_addr_t)dest, (bank_word_t)data));
+}
+
+/*-----------------------------------------------------------------------
  * Copy memory to flash, returns:
  * 0 - OK
  * 1 - write timeout
  * 2 - Flash not erased
+ * 3 - Program failed
  */
 
 int
-write_buff(flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
 {
 	ulong cp, wp, data;
 	int i, l, rc;
@@ -680,7 +462,7 @@ write_buff(flash_info_t *info, uchar *src, ulong addr, ulong cnt)
 			data = (data << 8) | (*(uchar *)cp);
 		}
 
-		if ((rc = write_word(info, wp, data)) != 0) {
+		if ((rc = write_word (info, wp, data)) != 0) {
 			return (rc);
 		}
 		wp += 4;
@@ -694,7 +476,7 @@ write_buff(flash_info_t *info, uchar *src, ulong addr, ulong cnt)
 		for (i=0; i<4; ++i) {
 			data = (data << 8) | *src++;
 		}
-		if ((rc = write_word(info, wp, data)) != 0) {
+		if ((rc = write_word (info, wp, data)) != 0) {
 			return (rc);
 		}
 		wp  += 4;
@@ -717,28 +499,7 @@ write_buff(flash_info_t *info, uchar *src, ulong addr, ulong cnt)
 		data = (data << 8) | (*(uchar *)cp);
 	}
 
-	return (write_word(info, wp, data));
-}
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int
-write_word(flash_info_t *info, ulong dest, ulong data)
-{
-	int retval;
-
-	/* Check if Flash is (sufficiently) erased */
-	if ((*(ulong *)dest & data) != data) {
-		return (2);
-	}
-
-	retval = bank_write_word((bank_addr_t)dest, (bank_word_t)data);
-
-	return (retval);
+	return (write_word (info, wp, data));
 }
 
 /*-----------------------------------------------------------------------
diff --git a/board/hymod/flash.h b/board/hymod/flash.h
index 3bccbc9..10db7fc 100644
--- a/board/hymod/flash.h
+++ b/board/hymod/flash.h
@@ -1,163 +1,156 @@
-/*************** DEFINES for Intel StrataFlash FLASH chip ********************/
-
 /*
- * acceptable chips types are:
+ * (C) Copyright 2000
+ * Murray Jensen, CSIRO-MIT, <Murray.Jensen@csiro.au>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
  *
- *	28F320J5, 28F640J5, 28F320J3A, 28F640J3A and 28F128J3A
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
  */
 
-/* register addresses, valid only following an CHIP_CMD_RD_ID command */
-#define CHIP_ADDR_REG_MAN	0x000000	/* manufacturer's id */
-#define CHIP_ADDR_REG_DEV	0x000001	/* device id */
-#define CHIP_ADDR_REG_CFGM	0x000003	/* master lock config */
-#define CHIP_ADDR_REG_CFG(b)	(((b)<<16)|2)	/* lock config for block b */
+/*************** DEFINES for Intel StrataFlash FLASH chip ********************/
 
 /* Commands */
-#define CHIP_CMD_RST		0xFF		/* reset flash */
-#define CHIP_CMD_RD_ID		0x90		/* read the id and lock bits */
-#define CHIP_CMD_RD_QUERY	0x98		/* read device capabilities */
-#define CHIP_CMD_RD_STAT	0x70		/* read the status register */
-#define CHIP_CMD_CLR_STAT	0x50		/* clear the staus register */
-#define CHIP_CMD_WR_BUF		0xE8		/* clear the staus register */
-#define CHIP_CMD_PROG		0x40		/* program word command */
-#define CHIP_CMD_ERASE1		0x20		/* 1st word for block erase */
-#define CHIP_CMD_ERASE2		0xD0		/* 2nd word for block erase */
-#define CHIP_CMD_ERASE_SUSP	0xB0		/* suspend block erase */
-#define CHIP_CMD_LOCK		0x60		/* 1st word for all lock cmds */
-#define CHIP_CMD_SET_LOCK_BLK	0x01		/* 2nd wrd set block lock bit */
-#define CHIP_CMD_SET_LOCK_MSTR	0xF1		/* 2nd wrd set master lck bit */
-#define CHIP_CMD_CLR_LOCK_BLK	0xD0		/* 2nd wrd clear blk lck bit */
+#define ISF_CMD_RST		0xFF		/* reset flash */
+#define ISF_CMD_RD_ID		0x90		/* read the id and lock bits */
+#define ISF_CMD_RD_QUERY	0x98		/* read device capabilities */
+#define ISF_CMD_RD_STAT		0x70		/* read the status register */
+#define ISF_CMD_CLR_STAT	0x50		/* clear the staus register */
+#define ISF_CMD_WR_BUF		0xE8		/* clear the staus register */
+#define ISF_CMD_PROG		0x40		/* program word command */
+#define ISF_CMD_ERASE1		0x20		/* 1st word for block erase */
+#define ISF_CMD_ERASE2		0xD0		/* 2nd word for block erase */
+#define ISF_CMD_ERASE_SUSP	0xB0		/* suspend block erase */
+#define ISF_CMD_LOCK		0x60		/* 1st word for all lock cmds */
+#define ISF_CMD_SET_LOCK_BLK	0x01		/* 2nd wrd set block lock bit */
+#define ISF_CMD_SET_LOCK_MSTR	0xF1		/* 2nd wrd set master lck bit */
+#define ISF_CMD_CLR_LOCK_BLK	0xD0		/* 2nd wrd clear blk lck bit */
 
 /* status register bits */
-#define CHIP_STAT_DPS		0x02		/* Device Protect Status */
-#define CHIP_STAT_VPPS		0x08		/* VPP Status */
-#define CHIP_STAT_PSLBS		0x10		/* Program+Set Lock Bit Stat */
-#define CHIP_STAT_ECLBS		0x20		/* Erase+Clr Lock Bit Stat */
-#define CHIP_STAT_ESS		0x40		/* Erase Suspend Status */
-#define CHIP_STAT_RDY		0x80		/* WSM Mach Status, 1=rdy */
-
-#define CHIP_STAT_ERR		(CHIP_STAT_VPPS | CHIP_STAT_DPS | \
-				    CHIP_STAT_ECLBS | CHIP_STAT_PSLBS)
-
-/* ID and Lock Configuration */
-#define CHIP_RD_ID_LOCK		0x01		/* Bit 0 of each byte */
-#define CHIP_RD_ID_MAN		0x89		/* Manufacturer code = 0x89 */
-#define CHIP_RD_ID_DEV		CFG_FLASH_ID
-
-/* dimensions */
-#define CHIP_WIDTH		2		/* chips are in 16 bit mode */
-#define CHIP_WSHIFT		1		/* (log2 of CHIP_WIDTH) */
-#define CHIP_NBLOCKS		CFG_FLASH_NBLOCKS
-#define CHIP_BLKSZ		(128 * 1024)	/* of 128Kbytes each */
-#define CHIP_SIZE		(CHIP_BLKSZ * CHIP_NBLOCKS)
+#define ISF_STAT_DPS		0x02		/* Device Protect Status */
+#define ISF_STAT_VPPS		0x08		/* VPP Status */
+#define ISF_STAT_PSLBS		0x10		/* Program+Set Lock Bit Stat */
+#define ISF_STAT_ECLBS		0x20		/* Erase+Clr Lock Bit Stat */
+#define ISF_STAT_ESS		0x40		/* Erase Suspend Status */
+#define ISF_STAT_RDY		0x80		/* WSM Mach Status, 1=rdy */
+
+#define ISF_STAT_ERR		(ISF_STAT_VPPS | ISF_STAT_DPS | \
+				    ISF_STAT_ECLBS | ISF_STAT_PSLBS)
+
+/* register addresses, valid only following an ISF_CMD_RD_ID command */
+#define ISF_REG_MAN_CODE	0x00		/* manufacturer code */
+#define ISF_REG_DEV_CODE	0x01		/* device code */
+#define ISF_REG_BLK_LCK		0x02		/* block lock configuration */
+#define ISF_REG_MST_LCK		0x03		/* master lock configuration */
 
 /********************** DEFINES for Hymod Flash ******************************/
 
 /*
- * The hymod board has 2 x 28F320J5 chips running in
- * 16 bit mode, for a 32 bit wide bank.
+ * this code requires that the flash on any Hymod board appear as a bank
+ * of two (identical) 16bit Intel StrataFlash chips with 64Kword erase
+ * sectors (or blocks), running in x16 bit mode and connected side-by-side
+ * to make a 32-bit wide bus.
  */
 
-typedef unsigned long bank_word_t;		/* 8/16/32/64bit unsigned int */
-typedef volatile bank_word_t *bank_addr_t;
-typedef unsigned long bank_size_t;		/* want this big - >= 32 bit */
+typedef unsigned long bank_word_t;
+typedef bank_word_t bank_blk_t[64 * 1024];
+
+#define BANK_FILL_WORD(b)	(((bank_word_t)(b) << 16) | (bank_word_t)(b))
+
+#ifdef EXAMPLE
 
-#define BANK_CHIP_WIDTH		2		/* each bank is 2 chips wide */
-#define BANK_CHIP_WSHIFT	1		/* (log2 of BANK_CHIP_WIDTH) */
+/* theoretically the following examples should also work */
 
-#define BANK_WIDTH		(CHIP_WIDTH * BANK_CHIP_WIDTH)
-#define BANK_WSHIFT		(CHIP_WSHIFT + BANK_CHIP_WSHIFT)
-#define BANK_NBLOCKS		CHIP_NBLOCKS
-#define BANK_BLKSZ		(CHIP_BLKSZ * BANK_CHIP_WIDTH)
-#define BANK_SIZE		(CHIP_SIZE * BANK_CHIP_WIDTH)
+/* one flash chip in x8 mode with 128Kword sectors and 8bit bus */
+typedef unsigned char bank_word_t;
+typedef bank_word_t bank_blk_t[128 * 1024];
+#define BANK_FILL_WORD(b)	((bank_word_t)(b))
 
-#define MAX_BANKS		1		/* only one bank possible */
+/* four flash chips in x16 mode with 32Kword sectors and 64bit bus */
+typedef unsigned long long bank_word_t;
+typedef bank_word_t bank_blk_t[32 * 1024];
+#define BANK_FILL_WORD(b)	( \
+				    ((bank_word_t)(b) << 48) \
+				    ((bank_word_t)(b) << 32) \
+				    ((bank_word_t)(b) << 16) \
+				    ((bank_word_t)(b) <<  0) \
+				)
+
+#endif /* EXAMPLE */
+
+/* the sizes of these two types should probably be the same */
+typedef volatile bank_word_t *bank_addr_t;
+typedef unsigned long bank_size_t;
 
 /* align bank addresses and sizes to bank word boundaries */
 #define BANK_ADDR_WORD_ALIGN(a)	((bank_addr_t)((bank_size_t)(a) \
-				    & ~(BANK_WIDTH - 1)))
-#define BANK_SIZE_WORD_ALIGN(s)	((bank_size_t)BANK_ADDR_WORD_ALIGN( \
-				    (bank_size_t)(s) + (BANK_WIDTH - 1)))
+				    & ~(sizeof (bank_word_t) - 1)))
+#define BANK_SIZE_WORD_ALIGN(s)	(((bank_size_t)(s) + sizeof (bank_word_t) - 1) \
+				    & ~(sizeof (bank_word_t) - 1))
 
 /* align bank addresses and sizes to bank block boundaries */
 #define BANK_ADDR_BLK_ALIGN(a)	((bank_addr_t)((bank_size_t)(a) \
-				    & ~(BANK_BLKSZ - 1)))
-#define BANK_SIZE_BLK_ALIGN(s)	((bank_size_t)BANK_ADDR_BLK_ALIGN( \
-				    (bank_size_t)(s) + (BANK_BLKSZ - 1)))
-
-/* align bank addresses and sizes to bank boundaries */
-#define BANK_ADDR_BANK_ALIGN(a)	((bank_addr_t)((bank_size_t)(a) \
-				    & ~(BANK_SIZE - 1)))
-#define BANK_SIZE_BANK_ALIGN(s)	((bank_size_t)BANK_ADDR_BANK_ALIGN( \
-				    (bank_size_t)(s) + (BANK_SIZE - 1)))
+				    & ~(sizeof (bank_blk_t) - 1)))
+#define BANK_SIZE_BLK_ALIGN(s)	(((bank_size_t)(s) + sizeof (bank_blk_t) - 1) \
+				    & ~(sizeof (bank_blk_t) - 1))
 
 /* add an offset to a bank address */
-#define BANK_ADDR_OFFSET(a, o)	(bank_addr_t)((bank_size_t)(a) + \
-				    (bank_size_t)(o))
-
-/* get base address of bank b, given flash base address a */
-#define BANK_ADDR_BASE(a, b)	BANK_ADDR_OFFSET(BANK_ADDR_BANK_ALIGN(a), \
-				    (bank_size_t)(b) * BANK_SIZE)
+#define BANK_ADDR_OFFSET(a, o)	((bank_addr_t)((bank_size_t)(a) + \
+				    (bank_size_t)(o)))
 
 /* adjust a bank address to start of next word, block or bank */
 #define BANK_ADDR_NEXT_WORD(a)	BANK_ADDR_OFFSET(BANK_ADDR_WORD_ALIGN(a), \
-				    BANK_WIDTH)
+				    sizeof (bank_word_t))
 #define BANK_ADDR_NEXT_BLK(a)	BANK_ADDR_OFFSET(BANK_ADDR_BLK_ALIGN(a), \
-				    BANK_BLKSZ)
-#define BANK_ADDR_NEXT_BANK(a)	BANK_ADDR_OFFSET(BANK_ADDR_BANK_ALIGN(a), \
-				    BANK_SIZE)
-
-/* get bank address of chip register r given a bank base address a */
-#define BANK_ADDR_REG(a, r)	BANK_ADDR_OFFSET(BANK_ADDR_BANK_ALIGN(a), \
-				    ((bank_size_t)(r) << BANK_WSHIFT))
-
-/* make a bank address for each chip register address */
-
-#define BANK_ADDR_REG_MAN(a)	BANK_ADDR_REG((a), CHIP_ADDR_REG_MAN)
-#define BANK_ADDR_REG_DEV(a)	BANK_ADDR_REG((a), CHIP_ADDR_REG_DEV)
-#define BANK_ADDR_REG_CFGM(a)	BANK_ADDR_REG((a), CHIP_ADDR_REG_CFGM)
-#define BANK_ADDR_REG_CFG(b,a)	BANK_ADDR_REG((a), CHIP_ADDR_REG_CFG(b))
-
-/*
- * replicate a chip cmd/stat/rd value into each byte position within a word
- * so that multiple chips are accessed in a single word i/o operation
- *
- * this must be as wide as the bank_word_t type, and take into account the
- * chip width and bank layout
- */
+				    sizeof (bank_blk_t))
 
-#define BANK_FILL_WORD(o)	((bank_word_t)( \
-				    ((unsigned long)(o) << 16) | \
-				    ((unsigned long)(o) <<  0) \
-				))
+/* get bank address of register r given a bank base address a and block num b */
+#define BANK_ADDR_REG(a, b, r)	BANK_ADDR_OFFSET(BANK_ADDR_OFFSET((a), \
+				    (bank_size_t)(b) * sizeof (bank_blk_t)), \
+					(bank_size_t)(r) * sizeof (bank_word_t))
 
-/* make a bank word value for each chip cmd/stat/rd value */
+/* make a bank word value for each StrataFlash value */
 
 /* Commands */
-#define BANK_CMD_RST		BANK_FILL_WORD(CHIP_CMD_RST)
-#define BANK_CMD_RD_ID		BANK_FILL_WORD(CHIP_CMD_RD_ID)
-#define BANK_CMD_RD_STAT	BANK_FILL_WORD(CHIP_CMD_RD_STAT)
-#define BANK_CMD_CLR_STAT	BANK_FILL_WORD(CHIP_CMD_CLR_STAT)
-#define BANK_CMD_ERASE1		BANK_FILL_WORD(CHIP_CMD_ERASE1)
-#define BANK_CMD_ERASE2		BANK_FILL_WORD(CHIP_CMD_ERASE2)
-#define BANK_CMD_PROG		BANK_FILL_WORD(CHIP_CMD_PROG)
-#define BANK_CMD_LOCK		BANK_FILL_WORD(CHIP_CMD_LOCK)
-#define BANK_CMD_SET_LOCK_BLK	BANK_FILL_WORD(CHIP_CMD_SET_LOCK_BLK)
-#define BANK_CMD_SET_LOCK_MSTR	BANK_FILL_WORD(CHIP_CMD_SET_LOCK_MSTR)
-#define BANK_CMD_CLR_LOCK_BLK	BANK_FILL_WORD(CHIP_CMD_CLR_LOCK_BLK)
+#define BANK_CMD_RST		BANK_FILL_WORD(ISF_CMD_RST)
+#define BANK_CMD_RD_ID		BANK_FILL_WORD(ISF_CMD_RD_ID)
+#define BANK_CMD_RD_STAT	BANK_FILL_WORD(ISF_CMD_RD_STAT)
+#define BANK_CMD_CLR_STAT	BANK_FILL_WORD(ISF_CMD_CLR_STAT)
+#define BANK_CMD_ERASE1		BANK_FILL_WORD(ISF_CMD_ERASE1)
+#define BANK_CMD_ERASE2		BANK_FILL_WORD(ISF_CMD_ERASE2)
+#define BANK_CMD_PROG		BANK_FILL_WORD(ISF_CMD_PROG)
+#define BANK_CMD_LOCK		BANK_FILL_WORD(ISF_CMD_LOCK)
+#define BANK_CMD_SET_LOCK_BLK	BANK_FILL_WORD(ISF_CMD_SET_LOCK_BLK)
+#define BANK_CMD_SET_LOCK_MSTR	BANK_FILL_WORD(ISF_CMD_SET_LOCK_MSTR)
+#define BANK_CMD_CLR_LOCK_BLK	BANK_FILL_WORD(ISF_CMD_CLR_LOCK_BLK)
 
 /* status register bits */
-#define BANK_STAT_DPS		BANK_FILL_WORD(CHIP_STAT_DPS)
-#define BANK_STAT_PSS		BANK_FILL_WORD(CHIP_STAT_PSS)
-#define BANK_STAT_VPPS		BANK_FILL_WORD(CHIP_STAT_VPPS)
-#define BANK_STAT_PSLBS		BANK_FILL_WORD(CHIP_STAT_PSLBS)
-#define BANK_STAT_ECLBS		BANK_FILL_WORD(CHIP_STAT_ECLBS)
-#define BANK_STAT_ESS		BANK_FILL_WORD(CHIP_STAT_ESS)
-#define BANK_STAT_RDY		BANK_FILL_WORD(CHIP_STAT_RDY)
-
-#define BANK_STAT_ERR		BANK_FILL_WORD(CHIP_STAT_ERR)
-
-/* ID and Lock Configuration */
-#define BANK_RD_ID_LOCK		BANK_FILL_WORD(CHIP_RD_ID_LOCK)
-#define BANK_RD_ID_MAN		BANK_FILL_WORD(CHIP_RD_ID_MAN)
-#define BANK_RD_ID_DEV		BANK_FILL_WORD(CHIP_RD_ID_DEV)
+#define BANK_STAT_DPS		BANK_FILL_WORD(ISF_STAT_DPS)
+#define BANK_STAT_PSS		BANK_FILL_WORD(ISF_STAT_PSS)
+#define BANK_STAT_VPPS		BANK_FILL_WORD(ISF_STAT_VPPS)
+#define BANK_STAT_PSLBS		BANK_FILL_WORD(ISF_STAT_PSLBS)
+#define BANK_STAT_ECLBS		BANK_FILL_WORD(ISF_STAT_ECLBS)
+#define BANK_STAT_ESS		BANK_FILL_WORD(ISF_STAT_ESS)
+#define BANK_STAT_RDY		BANK_FILL_WORD(ISF_STAT_RDY)
+
+#define BANK_STAT_ERR		BANK_FILL_WORD(ISF_STAT_ERR)
+
+/* make a bank register address for each StrataFlash register address */
+
+#define BANK_REG_MAN_CODE(a)	BANK_ADDR_REG((a), 0, ISF_REG_MAN_CODE)
+#define BANK_REG_DEV_CODE(a)	BANK_ADDR_REG((a), 0, ISF_REG_DEV_CODE)
+#define BANK_REG_BLK_LCK(a, b)	BANK_ADDR_REG((a), (b), ISF_REG_BLK_LCK)
+#define BANK_REG_MST_LCK(a)	BANK_ADDR_REG((a), 0, ISF_REG_MST_LCK)
diff --git a/board/hymod/global_env b/board/hymod/global_env
index 913f82d..16def24 100644
--- a/board/hymod/global_env
+++ b/board/hymod/global_env
@@ -1,3 +1,33 @@
+# DONT FORGET TO CHANGE THE "version" VAR BELOW IF YOU MAKE CHANGES TO THIS FILE
+
+# (C) Copyright 2001
+# Murray Jensen, CSIRO-MIT, <Murray.Jensen@csiro.au>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+
+#
+# global_env
+#
+# file used by Hymod boards to initialise the u-boot non-volatile
+# environment when u-boot is first run (it determines this by the
+# absence of the environment variable "global_env_loaded")
+#
 # format of this file is:
 #
 #	1. blank lines and lines beginning with '#' are ignored
@@ -7,32 +37,94 @@
 #		%s	serial number of the main board (10 digit zero filled)
 #		%S	serial number of the main board (plain number)
 #		%%	a percentage character
-#
-# no whitespace is removed in either <name> or <value>
+#		... otherwise the %x is discarded
 #
 # if first character in <name> is a dash ('-'), then an existing env var
-# will not be overwritten (the dash is removed).
+# will not be overwritten (the dash is removed). i.e. it is only set if
+# it does not exist
 #
 # if last character in <name> is a plus ('+'), then <value> will be appended
-# to any existing env var (the plus is removed). Duplicates of <value> are
+# to any existing env var (the plus is ignored). Duplicates of <value> are
 # removed.
 #
+# similarly, if the last character in <name> is a minus ('-'), then any
+# occurences of <value> in the current value of <name> will removed (the
+# minus is ignored).
+#
+# leading and trailing whitespace is removed in both <name> and <value>
+# (after processing any initial or final plus/minus in <name>).
+#
+
+# MISCELLANEOUS PARAMETERS
+
+# version must always come first
+version=3
 
 # set the ip address based on the main board serial number
 ipaddr=192.168.1.%S
 serverip=192.168.1.254
 
-# stop auto execute after tftp
+# stop auto execute after tftp (not a very good name really)
 autostart=no
 
+# setting this to "yes" forces the global_env file to be loaded and processed
+# if the current version is different to the version in the file
+always_check_env=no
+
+# BOOTING COMMANDS AND PARAMETERS
+
+# command to run when "auto-booting"
+bootcmd=bootm 40080000 40200000
+
+# how long the "countdown" to automatically running "bootcmd" is
+bootdelay=2
+
+# how long before it "times out" console input and attempts to run "bootcmd"
+bootretry=5
+
+# arguments passed to the boot program (i.e. linux kernel) via register 6
+# the linux kernel (v2.4) uses the following registers:
+#	r3 - address of board information structure
+#	r4 - address of initial ramdisk image (0 means no initrd)
+#	r5 - size of initial ramdisk image
+#	r6 - address of command line string
+-bootargs=root=/dev/ram rw
+
+# these four are for hymod linux intergrated into our Sun network
+bootargs+=serialno=%S
+bootargs+=nisclient nisdomain=mlb.dmt.csiro.au nissrvadr=138.194.112.4
+bootargs+=nfsclient
+bootargs+=automount
+
+# start a web server by default
+bootargs+=webserver
+
+# give negotiation time to finish
+bootargs+=netsleep=5
+
+# then our ciscos don't pass packets for 25-30 secs after that, so
+# pinging the server until it responds prevents network connections
+# from failing...
+bootargs+=netping
+
+# these are old bootargs - we don't need them anymore
+bootargs-=preload=unix,i2c-cpm,i2c-dev
+bootargs-=ramdisk_size=32768
+bootargs-=ramdisk_size=24576
+
+# FLASH MANIPULATION COMMANDS
+
+#
+# 16M flash, 64 x 256K sectors, mapped at address 0x40000000
 #
-# 16M flash map, 64 x 256K sectors, mapped at address 0x40000000
+# Sector(s)	Address		Size	Description
 #
-# sector 0:	boot
-# sector 1:	non volatile environment
-# sectors 2-4:	linux kernel image
-# sectors 5-7:	alternate linux kernel image
-# sectors 8-63:	linux initial ramdisk image
+#  0 -  0	0x40000000	256K	boot code
+#  1 -  1	0x40040000	256K	non volatile environment
+#  2 -  4	0x40080000	768K	linux kernel image
+#  5 -  7	0x40140000	768K	alternate linux kernel image
+#  8 - 47	0x40200000	 10M	linux initial ramdisk image
+# 48 - 63	0x40c00000	  4M	ramdisk image for applications
 #
 
 fetchboot=tftp 100000 /hymod/u-boot.bin
@@ -49,21 +141,18 @@ newlinux=run fetchlinux eraselinux copylinux cmplinux
 
 fetchaltlinux=tftp 100000 /hymod/altlinux.bin
 erasealtlinux=erase 1:5-7
-copyaltlinux=cp.b 100000 40080000 $(filesize)
-cmpaltlinux=cmp.b 100000 40080000 $(filesize)
+copyaltlinux=cp.b 100000 40140000 $(filesize)
+cmpaltlinux=cmp.b 100000 40140000 $(filesize)
 newaltlinux=run fetchaltlinux erasealtlinux copyaltlinux cmpaltlinux
 
 fetchird=tftp 100000 /hymod/initrd.bin
-eraseird=erase 1:8-63
+eraseird=erase 1:8-47
 copyird=cp.b 100000 40200000 $(filesize)
 cmpird=cmp.b 100000 40200000 $(filesize)
 newinitrd=run fetchird eraseird copyird cmpird
 
-bootcmd=bootm 40080000 40200000
--bootargs=root=/dev/ram rw
-# these are for hymod linux
-bootargs+=preload=unix,i2c-cpm,i2c-dev
-bootargs+=serialno=%S
-bootargs+=ramdisk_size=32768
-bootargs+=automount nisclient nisdomain=mlb.dmt.csiro.au nissrvadr=138.194.112.4
-bootdelay=2
+fetchard=tftp 100000 /hymod/apprd.bin
+eraseard=erase 1:48-63
+copyard=cp.b 100000 40c00000 $(filesize)
+cmpard=cmp.b 100000 40c00000 $(filesize)
+newapprd=run fetchard eraseard copyard cmpard
diff --git a/board/hymod/hymod.c b/board/hymod/hymod.c
index 829f254..3611a12 100644
--- a/board/hymod/hymod.c
+++ b/board/hymod/hymod.c
@@ -20,11 +20,12 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  * MA 02111-1307 USA
  *
- * Hacked for the Hymod board by Murray.Jensen@cmst.csiro.au, 20-Oct-00
+ * Hacked for the Hymod board by Murray.Jensen@csiro.au, 20-Oct-00
  */
 
 #include <common.h>
 #include <mpc8260.h>
+#include <mpc8260_irq.h>
 #include <ioports.h>
 #include <i2c.h>
 #include <asm/iopin_8260.h>
@@ -32,15 +33,11 @@
 /* ------------------------------------------------------------------------- */
 
 /* imports from eeprom.c */
-extern int eeprom_load (unsigned, hymod_eeprom_t *);
-extern int eeprom_fetch (unsigned, char *, ulong);
-extern void eeprom_print (hymod_eeprom_t *);
+extern int hymod_eeprom_read (int, hymod_eeprom_t *);
+extern void hymod_eeprom_print (hymod_eeprom_t *);
 
-/* imports from fetch.c */
-extern int fetch_and_parse (char *, ulong, int (*)(uchar *, uchar *));
-
-/* imports from common/main.c */
-extern char console_buffer[CFG_CBSIZE];
+/* imports from env.c */
+extern void hymod_check_env (void);
 
 /* ------------------------------------------------------------------------- */
 
@@ -54,274 +51,152 @@ extern char console_buffer[CFG_CBSIZE];
 const iop_conf_t iop_conf_tab[4][32] = {
 
 	/* Port A configuration */
-	{							/*        conf ppar psor pdir podr pdat */
-									/* PA31 */ {1, 1, 1, 0, 0, 0},
-									/* FCC1 MII COL */
-									/* PA30 */ {1, 1, 1, 0, 0, 0},
-									/* FCC1 MII CRS */
-									/* PA29 */ {1, 1, 1, 1, 0, 0},
-									/* FCC1 MII TX_ER */
-									/* PA28 */ {1, 1, 1, 1, 0, 0},
-									/* FCC1 MII TX_EN */
-									/* PA27 */ {1, 1, 1, 0, 0, 0},
-									/* FCC1 MII RX_DV */
-									/* PA26 */ {1, 1, 1, 0, 0, 0},
-									/* FCC1 MII RX_ER */
-									/* PA25 */ {1, 0, 0, 1, 0, 0},
-									/* FCC2 MII MDIO */
-									/* PA24 */ {1, 0, 0, 1, 0, 0},
-									/* FCC2 MII MDC */
-									/* PA23 */ {1, 0, 0, 1, 0, 0},
-									/* FCC3 MII MDIO */
-									/* PA22 */ {1, 0, 0, 1, 0, 0},
-									/* FCC3 MII MDC */
-									/* PA21 */ {1, 1, 0, 1, 0, 0},
-									/* FCC1 MII TxD[3] */
-									/* PA20 */ {1, 1, 0, 1, 0, 0},
-									/* FCC1 MII TxD[2] */
-									/* PA19 */ {1, 1, 0, 1, 0, 0},
-									/* FCC1 MII TxD[1] */
-									/* PA18 */ {1, 1, 0, 1, 0, 0},
-									/* FCC1 MII TxD[0] */
-									/* PA17 */ {1, 1, 0, 0, 0, 0},
-									/* FCC1 MII RxD[3] */
-									/* PA16 */ {1, 1, 0, 0, 0, 0},
-									/* FCC1 MII RxD[2] */
-									/* PA15 */ {1, 1, 0, 0, 0, 0},
-									/* FCC1 MII RxD[1] */
-									/* PA14 */ {1, 1, 0, 0, 0, 0},
-									/* FCC1 MII RxD[0] */
-									/* PA13 */ {1, 0, 0, 1, 0, 0},
-									/* FCC1 MII MDIO */
-									/* PA12 */ {1, 0, 0, 1, 0, 0},
-									/* FCC1 MII MDC */
-									/* PA11 */ {1, 0, 0, 1, 0, 0},
-									/* SEL_CD */
-									/* PA10 */ {1, 0, 0, 0, 0, 0},
-									/* FLASH STS1 */
-									/* PA9  */ {1, 0, 0, 0, 0, 0},
-									/* FLASH STS0 */
-									/* PA8  */ {1, 0, 0, 0, 0, 0},
-									/* FLASH ~PE */
-									/* PA7  */ {1, 0, 0, 0, 0, 0},
-									/* WATCH ~HRESET */
-									/* PA6  */ {1, 0, 0, 0, 1, 0},
-									/* VC DONE */
-									/* PA5  */ {1, 0, 0, 1, 1, 0},
-									/* VC INIT */
-									/* PA4  */ {1, 0, 0, 1, 0, 0},
-									/* VC ~PROG */
-									/* PA3  */ {1, 0, 0, 1, 0, 0},
-									/* VM ENABLE */
-									/* PA2  */ {1, 0, 0, 0, 1, 0},
-									/* VM DONE */
-									/* PA1  */ {1, 0, 0, 1, 1, 0},
-									/* VM INIT */
-									/* PA0  */ {1, 0, 0, 1, 0, 0}
-									/* VM ~PROG */
-	 },
+	{
+		/* cnf par sor dir odr dat */
+		{   1,  1,  1,  0,  0,  0   },	/* PA31: FCC1 MII COL */
+		{   1,  1,  1,  0,  0,  0   },	/* PA30: FCC1 MII CRS */
+		{   1,  1,  1,  1,  0,  0   },	/* PA29: FCC1 MII TX_ER */
+		{   1,  1,  1,  1,  0,  0   },	/* PA28: FCC1 MII TX_EN */
+		{   1,  1,  1,  0,  0,  0   },	/* PA27: FCC1 MII RX_DV */
+		{   1,  1,  1,  0,  0,  0   },	/* PA26: FCC1 MII RX_ER */
+		{   1,  0,  0,  1,  0,  0   },	/* PA25: FCC2 MII MDIO */
+		{   1,  0,  0,  1,  0,  0   },	/* PA24: FCC2 MII MDC */
+		{   1,  0,  0,  1,  0,  0   },	/* PA23: FCC3 MII MDIO */
+		{   1,  0,  0,  1,  0,  0   },	/* PA22: FCC3 MII MDC */
+		{   1,  1,  0,  1,  0,  0   },	/* PA21: FCC1 MII TxD[3] */
+		{   1,  1,  0,  1,  0,  0   },	/* PA20: FCC1 MII TxD[2] */
+		{   1,  1,  0,  1,  0,  0   },	/* PA19: FCC1 MII TxD[1] */
+		{   1,  1,  0,  1,  0,  0   },	/* PA18: FCC1 MII TxD[0] */
+		{   1,  1,  0,  0,  0,  0   },	/* PA17: FCC1 MII RxD[3] */
+		{   1,  1,  0,  0,  0,  0   },	/* PA16: FCC1 MII RxD[2] */
+		{   1,  1,  0,  0,  0,  0   },	/* PA15: FCC1 MII RxD[1] */
+		{   1,  1,  0,  0,  0,  0   },	/* PA14: FCC1 MII RxD[0] */
+		{   1,  0,  0,  1,  0,  0   },	/* PA13: FCC1 MII MDIO */
+		{   1,  0,  0,  1,  0,  0   },	/* PA12: FCC1 MII MDC */
+		{   1,  0,  0,  1,  0,  0   },	/* PA11: SEL_CD */
+		{   1,  0,  0,  0,  0,  0   },	/* PA10: FLASH STS1 */
+		{   1,  0,  0,  0,  0,  0   },	/* PA09: FLASH STS0 */
+		{   1,  0,  0,  0,  0,  0   },	/* PA08: FLASH ~PE */
+		{   1,  0,  0,  0,  0,  0   },	/* PA07: WATCH ~HRESET */
+		{   1,  0,  0,  0,  1,  0   },	/* PA06: VC DONE */
+		{   1,  0,  0,  1,  1,  0   },	/* PA05: VC INIT */
+		{   1,  0,  0,  1,  0,  0   },	/* PA04: VC ~PROG */
+		{   1,  0,  0,  1,  0,  0   },	/* PA03: VM ENABLE */
+		{   1,  0,  0,  0,  1,  0   },	/* PA02: VM DONE */
+		{   1,  0,  0,  1,  1,  0   },	/* PA01: VM INIT */
+		{   1,  0,  0,  1,  0,  0   } 	/* PA00: VM ~PROG */
+	},
 
 	/* Port B configuration */
-	{							/*        conf ppar psor pdir podr pdat */
-									/* PB31 */ {1, 1, 0, 1, 0, 0},
-									/* FCC2 MII TX_ER */
-									/* PB30 */ {1, 1, 0, 0, 0, 0},
-									/* FCC2 MII RX_DV */
-									/* PB29 */ {1, 1, 1, 1, 0, 0},
-									/* FCC2 MII TX_EN */
-									/* PB28 */ {1, 1, 0, 0, 0, 0},
-									/* FCC2 MII RX_ER */
-									/* PB27 */ {1, 1, 0, 0, 0, 0},
-									/* FCC2 MII COL */
-									/* PB26 */ {1, 1, 0, 0, 0, 0},
-									/* FCC2 MII CRS */
-									/* PB25 */ {1, 1, 0, 1, 0, 0},
-									/* FCC2 MII TxD[3] */
-									/* PB24 */ {1, 1, 0, 1, 0, 0},
-									/* FCC2 MII TxD[2] */
-									/* PB23 */ {1, 1, 0, 1, 0, 0},
-									/* FCC2 MII TxD[1] */
-									/* PB22 */ {1, 1, 0, 1, 0, 0},
-									/* FCC2 MII TxD[0] */
-									/* PB21 */ {1, 1, 0, 0, 0, 0},
-									/* FCC2 MII RxD[0] */
-									/* PB20 */ {1, 1, 0, 0, 0, 0},
-									/* FCC2 MII RxD[1] */
-									/* PB19 */ {1, 1, 0, 0, 0, 0},
-									/* FCC2 MII RxD[2] */
-									/* PB18 */ {1, 1, 0, 0, 0, 0},
-									/* FCC2 MII RxD[3] */
-									/* PB17 */ {1, 1, 0, 0, 0, 0},
-									/* FCC3 MII RX_DV */
-									/* PB16 */ {1, 1, 0, 0, 0, 0},
-									/* FCC3 MII RX_ER */
-									/* PB15 */ {1, 1, 0, 1, 0, 0},
-									/* FCC3 MII TX_ER */
-									/* PB14 */ {1, 1, 0, 1, 0, 0},
-									/* FCC3 MII TX_EN */
-									/* PB13 */ {1, 1, 0, 0, 0, 0},
-									/* FCC3 MII COL */
-									/* PB12 */ {1, 1, 0, 0, 0, 0},
-									/* FCC3 MII CRS */
-									/* PB11 */ {1, 1, 0, 0, 0, 0},
-									/* FCC3 MII RxD[3] */
-									/* PB10 */ {1, 1, 0, 0, 0, 0},
-									/* FCC3 MII RxD[2] */
-									/* PB9  */ {1, 1, 0, 0, 0, 0},
-									/* FCC3 MII RxD[1] */
-									/* PB8  */ {1, 1, 0, 0, 0, 0},
-									/* FCC3 MII RxD[0] */
-									/* PB7  */ {1, 1, 0, 1, 0, 0},
-									/* FCC3 MII TxD[3] */
-									/* PB6  */ {1, 1, 0, 1, 0, 0},
-									/* FCC3 MII TxD[2] */
-									/* PB5  */ {1, 1, 0, 1, 0, 0},
-									/* FCC3 MII TxD[1] */
-									/* PB4  */ {1, 1, 0, 1, 0, 0},
-									/* FCC3 MII TxD[0] */
-									/* PB3  */ {0, 0, 0, 0, 0, 0},
-									/* pin doesn't exist */
-									/* PB2  */ {0, 0, 0, 0, 0, 0},
-									/* pin doesn't exist */
-									/* PB1  */ {0, 0, 0, 0, 0, 0},
-									/* pin doesn't exist */
-									/* PB0  */ {0, 0, 0, 0, 0, 0}
-									/* pin doesn't exist */
-	 },
-
-	/* Port C */
-	{							/*        conf ppar psor pdir podr pdat */
-									/* PC31 */ {1, 0, 0, 0, 0, 0},
-									/* MEZ ~IACK */
-	 /* PC30 */ {0, 0, 0, 0, 0, 0},
-									/* PC29 */ {1, 1, 0, 0, 0, 0},
-									/* CLK SCCx */
-									/* PC28 */ {1, 1, 0, 0, 0, 0},
-									/* CLK4 */
-									/* PC27 */ {1, 1, 0, 0, 0, 0},
-									/* CLK SCCF */
-									/* PC26 */ {1, 1, 0, 0, 0, 0},
-									/* CLK 32K */
-									/* PC25 */ {1, 1, 0, 0, 0, 0},
-									/* BRG4/CLK7 */
-	 /* PC24 */ {0, 0, 0, 0, 0, 0},
-									/* PC23 */ {1, 1, 0, 0, 0, 0},
-									/* CLK SCCx */
-									/* PC22 */ {1, 1, 0, 0, 0, 0},
-									/* FCC1 MII RX_CLK */
-									/* PC21 */ {1, 1, 0, 0, 0, 0},
-									/* FCC1 MII TX_CLK */
-									/* PC20 */ {1, 1, 0, 0, 0, 0},
-									/* CLK SCCF */
-									/* PC19 */ {1, 1, 0, 0, 0, 0},
-									/* FCC2 MII RX_CLK */
-									/* PC18 */ {1, 1, 0, 0, 0, 0},
-									/* FCC2 MII TX_CLK */
-									/* PC17 */ {1, 1, 0, 0, 0, 0},
-									/* FCC3 MII RX_CLK */
-									/* PC16 */ {1, 1, 0, 0, 0, 0},
-									/* FCC3 MII TX_CLK */
-									/* PC15 */ {1, 0, 0, 0, 0, 0},
-									/* SCC1 UART ~CTS */
-									/* PC14 */ {1, 0, 0, 0, 0, 0},
-									/* SCC1 UART ~CD */
-									/* PC13 */ {1, 0, 0, 0, 0, 0},
-									/* SCC2 UART ~CTS */
-									/* PC12 */ {1, 0, 0, 0, 0, 0},
-									/* SCC2 UART ~CD */
-									/* PC11 */ {1, 0, 0, 1, 0, 0},
-									/* SCC1 UART ~DTR */
-									/* PC10 */ {1, 0, 0, 1, 0, 0},
-									/* SCC1 UART ~DSR */
-									/* PC9  */ {1, 0, 0, 1, 0, 0},
-									/* SCC2 UART ~DTR */
-									/* PC8  */ {1, 0, 0, 1, 0, 0},
-									/* SCC2 UART ~DSR */
-									/* PC7  */ {1, 0, 0, 0, 0, 0},
-									/* TEMP ~ALERT */
-									/* PC6  */ {1, 0, 0, 0, 0, 0},
-									/* FCC3 INT */
-									/* PC5  */ {1, 0, 0, 0, 0, 0},
-									/* FCC2 INT */
-									/* PC4  */ {1, 0, 0, 0, 0, 0},
-									/* FCC1 INT */
-									/* PC3  */ {1, 1, 1, 1, 0, 0},
-									/* SDMA IDMA2 ~DACK */
-									/* PC2  */ {1, 1, 1, 0, 0, 0},
-									/* SDMA IDMA2 ~DONE */
-									/* PC1  */ {1, 1, 0, 0, 0, 0},
-									/* SDMA IDMA2 ~DREQ */
-									/* PC0  */ {1, 1, 0, 1, 0, 0}
-									/* BRG7 */
-	 },
-
-	/* Port D */
-	{							/*        conf ppar psor pdir podr pdat */
-									/* PD31 */ {1, 1, 0, 0, 0, 0},
-									/* SCC1 UART RxD */
-									/* PD30 */ {1, 1, 1, 1, 0, 0},
-									/* SCC1 UART TxD */
-									/* PD29 */ {1, 0, 0, 1, 0, 0},
-									/* SCC1 UART ~RTS */
-									/* PD28 */ {1, 1, 0, 0, 0, 0},
-									/* SCC2 UART RxD */
-									/* PD27 */ {1, 1, 0, 1, 0, 0},
-									/* SCC2 UART TxD */
-									/* PD26 */ {1, 0, 0, 1, 0, 0},
-									/* SCC2 UART ~RTS */
-									/* PD25 */ {1, 0, 0, 0, 0, 0},
-									/* SCC1 UART ~RI */
-									/* PD24 */ {1, 0, 0, 0, 0, 0},
-									/* SCC2 UART ~RI */
-									/* PD23 */ {1, 0, 0, 1, 0, 0},
-									/* CLKGEN PD */
-									/* PD22 */ {1, 0, 0, 0, 0, 0},
-									/* USER3 */
-									/* PD21 */ {1, 0, 0, 0, 0, 0},
-									/* USER2 */
-									/* PD20 */ {1, 0, 0, 0, 0, 0},
-									/* USER1 */
-									/* PD19 */ {1, 1, 1, 0, 0, 0},
-									/* SPI ~SEL */
-									/* PD18 */ {1, 1, 1, 0, 0, 0},
-									/* SPI CLK */
-									/* PD17 */ {1, 1, 1, 0, 0, 0},
-									/* SPI MOSI */
-									/* PD16 */ {1, 1, 1, 0, 0, 0},
-									/* SPI MISO */
-									/* PD15 */ {1, 1, 1, 0, 1, 0},
-									/* I2C SDA */
-									/* PD14 */ {1, 1, 1, 0, 1, 0},
-									/* I2C SCL */
-									/* PD13 */ {1, 0, 0, 1, 0, 1},
-									/* TEMP ~STDBY */
-									/* PD12 */ {1, 0, 0, 1, 0, 1},
-									/* FCC3 ~RESET */
-									/* PD11 */ {1, 0, 0, 1, 0, 1},
-									/* FCC2 ~RESET */
-									/* PD10 */ {1, 0, 0, 1, 0, 1},
-									/* FCC1 ~RESET */
-									/* PD9  */ {1, 0, 0, 0, 0, 0},
-									/* PD9 */
-									/* PD8  */ {1, 0, 0, 0, 0, 0},
-									/* PD8 */
-									/* PD7  */ {1, 0, 0, 1, 0, 1},
-									/* PD7 */
-									/* PD6  */ {1, 0, 0, 1, 0, 1},
-									/* PD6 */
-									/* PD5  */ {1, 0, 0, 1, 0, 1},
-									/* PD5 */
-									/* PD4  */ {1, 0, 0, 1, 0, 1},
-									/* PD4 */
-									/* PD3  */ {0, 0, 0, 0, 0, 0},
-									/* pin doesn't exist */
-									/* PD2  */ {0, 0, 0, 0, 0, 0},
-									/* pin doesn't exist */
-									/* PD1  */ {0, 0, 0, 0, 0, 0},
-									/* pin doesn't exist */
-									/* PD0  */ {0, 0, 0, 0, 0, 0}
-									/* pin doesn't exist */
-	 }
+	{
+		/* cnf par sor dir odr dat */
+		{   1,  1,  0,  1,  0,  0   },	/* PB31: FCC2 MII TX_ER */
+		{   1,  1,  0,  0,  0,  0   },	/* PB30: FCC2 MII RX_DV */
+		{   1,  1,  1,  1,  0,  0   },	/* PB29: FCC2 MII TX_EN */
+		{   1,  1,  0,  0,  0,  0   },	/* PB28: FCC2 MII RX_ER */
+		{   1,  1,  0,  0,  0,  0   },	/* PB27: FCC2 MII COL */
+		{   1,  1,  0,  0,  0,  0   },	/* PB26: FCC2 MII CRS */
+		{   1,  1,  0,  1,  0,  0   },	/* PB25: FCC2 MII TxD[3] */
+		{   1,  1,  0,  1,  0,  0   },	/* PB24: FCC2 MII TxD[2] */
+		{   1,  1,  0,  1,  0,  0   },	/* PB23: FCC2 MII TxD[1] */
+		{   1,  1,  0,  1,  0,  0   },	/* PB22: FCC2 MII TxD[0] */
+		{   1,  1,  0,  0,  0,  0   },	/* PB21: FCC2 MII RxD[0] */
+		{   1,  1,  0,  0,  0,  0   },	/* PB20: FCC2 MII RxD[1] */
+		{   1,  1,  0,  0,  0,  0   },	/* PB19: FCC2 MII RxD[2] */
+		{   1,  1,  0,  0,  0,  0   },	/* PB18: FCC2 MII RxD[3] */
+		{   1,  1,  0,  0,  0,  0   },	/* PB17: FCC3 MII RX_DV */
+		{   1,  1,  0,  0,  0,  0   },	/* PB16: FCC3 MII RX_ER */
+		{   1,  1,  0,  1,  0,  0   },	/* PB15: FCC3 MII TX_ER */
+		{   1,  1,  0,  1,  0,  0   },	/* PB14: FCC3 MII TX_EN */
+		{   1,  1,  0,  0,  0,  0   },	/* PB13: FCC3 MII COL */
+		{   1,  1,  0,  0,  0,  0   },	/* PB12: FCC3 MII CRS */
+		{   1,  1,  0,  0,  0,  0   },	/* PB11: FCC3 MII RxD[3] */
+		{   1,  1,  0,  0,  0,  0   },	/* PB10: FCC3 MII RxD[2] */
+		{   1,  1,  0,  0,  0,  0   },	/* PB09: FCC3 MII RxD[1] */
+		{   1,  1,  0,  0,  0,  0   },	/* PB08: FCC3 MII RxD[0] */
+		{   1,  1,  0,  1,  0,  0   },	/* PB07: FCC3 MII TxD[3] */
+		{   1,  1,  0,  1,  0,  0   },	/* PB06: FCC3 MII TxD[2] */
+		{   1,  1,  0,  1,  0,  0   },	/* PB05: FCC3 MII TxD[1] */
+		{   1,  1,  0,  1,  0,  0   },	/* PB04: FCC3 MII TxD[0] */
+		{   0,  0,  0,  0,  0,  0   },	/* PB03: pin doesn't exist */
+		{   0,  0,  0,  0,  0,  0   },	/* PB02: pin doesn't exist */
+		{   0,  0,  0,  0,  0,  0   },	/* PB01: pin doesn't exist */
+		{   0,  0,  0,  0,  0,  0   }	/* PB00: pin doesn't exist */
+	},
+
+	/* Port C configuration */
+	{
+		/* cnf par sor dir odr dat */
+		{   1,  0,  0,  0,  0,  0   },	/* PC31: MEZ ~IACK */
+		{   0,  0,  0,  0,  0,  0   },	/* PC30: ? */
+		{   1,  1,  0,  0,  0,  0   },	/* PC29: CLK SCCx */
+		{   1,  1,  0,  0,  0,  0   },	/* PC28: CLK4 */
+		{   1,  1,  0,  0,  0,  0   },	/* PC27: CLK SCCF */
+		{   1,  1,  0,  0,  0,  0   },	/* PC26: CLK 32K */
+		{   1,  1,  0,  0,  0,  0   },	/* PC25: BRG4/CLK7 */
+		{   0,  0,  0,  0,  0,  0   },	/* PC24: ? */
+		{   1,  1,  0,  0,  0,  0   },	/* PC23: CLK SCCx */
+		{   1,  1,  0,  0,  0,  0   },	/* PC22: FCC1 MII RX_CLK */
+		{   1,  1,  0,  0,  0,  0   },	/* PC21: FCC1 MII TX_CLK */
+		{   1,  1,  0,  0,  0,  0   },	/* PC20: CLK SCCF */
+		{   1,  1,  0,  0,  0,  0   },	/* PC19: FCC2 MII RX_CLK */
+		{   1,  1,  0,  0,  0,  0   },	/* PC18: FCC2 MII TX_CLK */
+		{   1,  1,  0,  0,  0,  0   },	/* PC17: FCC3 MII RX_CLK */
+		{   1,  1,  0,  0,  0,  0   },	/* PC16: FCC3 MII TX_CLK */
+		{   1,  0,  0,  0,  0,  0   },	/* PC15: SCC1 UART ~CTS */
+		{   1,  0,  0,  0,  0,  0   },	/* PC14: SCC1 UART ~CD */
+		{   1,  0,  0,  0,  0,  0   },	/* PC13: SCC2 UART ~CTS */
+		{   1,  0,  0,  0,  0,  0   },	/* PC12: SCC2 UART ~CD */
+		{   1,  0,  0,  1,  0,  0   },	/* PC11: SCC1 UART ~DTR */
+		{   1,  0,  0,  1,  0,  0   },	/* PC10: SCC1 UART ~DSR */
+		{   1,  0,  0,  1,  0,  0   },	/* PC09: SCC2 UART ~DTR */
+		{   1,  0,  0,  1,  0,  0   },	/* PC08: SCC2 UART ~DSR */
+		{   1,  0,  0,  0,  0,  0   },	/* PC07: TEMP ~ALERT */
+		{   1,  0,  0,  0,  0,  0   },	/* PC06: FCC3 INT */
+		{   1,  0,  0,  0,  0,  0   },	/* PC05: FCC2 INT */
+		{   1,  0,  0,  0,  0,  0   },	/* PC04: FCC1 INT */
+		{   0,  1,  1,  1,  0,  0   },	/* PC03: SDMA IDMA2 ~DACK */
+		{   0,  1,  1,  0,  0,  0   },	/* PC02: SDMA IDMA2 ~DONE */
+		{   0,  1,  0,  0,  0,  0   },	/* PC01: SDMA IDMA2 ~DREQ */
+		{   1,  1,  0,  1,  0,  0   }	/* PC00: BRG7 */
+	},
+
+	/* Port D configuration */
+	{
+		/* cnf par sor dir odr dat */
+		{   1,  1,  0,  0,  0,  0   },	/* PD31: SCC1 UART RxD */
+		{   1,  1,  1,  1,  0,  0   },	/* PD30: SCC1 UART TxD */
+		{   1,  0,  0,  1,  0,  0   },	/* PD29: SCC1 UART ~RTS */
+		{   1,  1,  0,  0,  0,  0   },	/* PD28: SCC2 UART RxD */
+		{   1,  1,  0,  1,  0,  0   },	/* PD27: SCC2 UART TxD */
+		{   1,  0,  0,  1,  0,  0   },	/* PD26: SCC2 UART ~RTS */
+		{   1,  0,  0,  0,  0,  0   },	/* PD25: SCC1 UART ~RI */
+		{   1,  0,  0,  0,  0,  0   },	/* PD24: SCC2 UART ~RI */
+		{   1,  0,  0,  1,  0,  0   },	/* PD23: CLKGEN PD */
+		{   1,  0,  0,  0,  0,  0   },	/* PD22: USER3 */
+		{   1,  0,  0,  0,  0,  0   },	/* PD21: USER2 */
+		{   1,  0,  0,  0,  0,  0   },	/* PD20: USER1 */
+		{   1,  1,  1,  0,  0,  0   },	/* PD19: SPI ~SEL */
+		{   1,  1,  1,  0,  0,  0   },	/* PD18: SPI CLK */
+		{   1,  1,  1,  0,  0,  0   },	/* PD17: SPI MOSI */
+		{   1,  1,  1,  0,  0,  0   },	/* PD16: SPI MISO */
+		{   1,  1,  1,  0,  1,  0   },	/* PD15: I2C SDA */
+		{   1,  1,  1,  0,  1,  0   },	/* PD14: I2C SCL */
+		{   1,  0,  0,  1,  0,  1   },	/* PD13: TEMP ~STDBY */
+		{   1,  0,  0,  1,  0,  1   },	/* PD12: FCC3 ~RESET */
+		{   1,  0,  0,  1,  0,  1   },	/* PD11: FCC2 ~RESET */
+		{   1,  0,  0,  1,  0,  1   },	/* PD10: FCC1 ~RESET */
+		{   1,  0,  0,  0,  0,  0   },	/* PD09: PD9 */
+		{   1,  0,  0,  0,  0,  0   },	/* PD08: PD8 */
+		{   1,  0,  0,  1,  0,  1   },	/* PD07: PD7 */
+		{   1,  0,  0,  1,  0,  1   },	/* PD06: PD6 */
+		{   1,  0,  0,  1,  0,  1   },	/* PD05: PD5 */
+		{   1,  0,  0,  1,  0,  1   },	/* PD04: PD4 */
+		{   0,  0,  0,  0,  0,  0   },	/* PD03: pin doesn't exist */
+		{   0,  0,  0,  0,  0,  0   },	/* PD02: pin doesn't exist */
+		{   0,  0,  0,  0,  0,  0   },	/* PD01: pin doesn't exist */
+		{   0,  0,  0,  0,  0,  0   }	/* PD00: pin doesn't exist */
+	}
 };
 
 /* ------------------------------------------------------------------------- */
@@ -334,17 +209,36 @@ const iop_conf_t iop_conf_tab[4][32] = {
  *
  * the data is written to the FS6377 via the i2c bus using address in
  * "fs6377_addr" (address is 7 bits - R/W bit not included).
+ *
+ * The fs6377 has four clock outputs: A, B, C and D.
+ *
+ * Outputs C and D can each provide two different clock outputs C1/D1 or
+ * C2/D2 depending on the state of the SEL_CD input which is connected to
+ * the MPC8260 I/O port pin PA11. PA11 output (SEL_CD input) low (or 0)
+ * selects C1/D1 and PA11 output (SEL_CD input) high (or 1) selects C2/D2.
+ *
+ * PA11 defaults to output low (or 0) in the i/o port config table above.
+ *
+ * Output A provides a 100MHz for the High Speed Serial chips. Output B
+ * provides a 3.6864MHz clock for more accurate asynchronous serial bit
+ * rates. Output C is routed to the mezzanine connector but is currently
+ * unused - both C1 and C2 are set to 16MHz. Output D is used by both the
+ * alt-input and display mezzanine boards for their video chips. The
+ * alt-input board requires a clock of 24.576MHz and this is available on
+ * D1 (PA11=SEL_CD=0). The display board requires a clock of 27MHz and this
+ * is available on D2 (PA11=SEL_CD=1).
+ *
+ * So the default is a clock suitable for the alt-input board. PA11 is toggled
+ * later in misc_init_r(), if a display board is detected.
  */
 
 uchar fs6377_addr = 0x5c;
 
 uchar fs6377_regs[16] = {
-	12, 75, 64, 25, 144, 128, 25, 192,
-	0, 16, 135, 192, 224, 64, 64, 192
+	 12,  75,  64,  25, 144, 128,  25, 192,
+	  0,  16, 135, 192, 224,  64,  64, 192
 };
 
-iopin_t pa11 = { IOPIN_PORTA, 11, 0 };
-
 /* ------------------------------------------------------------------------- */
 
 /*
@@ -356,7 +250,8 @@ iopin_t pa11 = { IOPIN_PORTA, 11, 0 };
  * the timebase, for udelay())
  */
 
-int board_postclk_init (void)
+int
+board_postclk_init (void)
 {
 	i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
 
@@ -371,7 +266,7 @@ int board_postclk_init (void)
 	 * if this doesn't work
 	 */
 	(void) i2c_write (fs6377_addr, 0, 1, fs6377_regs,
-					  sizeof (fs6377_regs));
+					sizeof (fs6377_regs));
 
 	return (0);
 }
@@ -382,7 +277,8 @@ int board_postclk_init (void)
  * Check Board Identity: Hardwired to HYMOD
  */
 
-int checkboard (void)
+int
+checkboard (void)
 {
 	puts ("Board: HYMOD\n");
 	return (0);
@@ -446,7 +342,8 @@ uint upmc_table[] = {
 	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_
 };
 
-int misc_init_f (void)
+int
+misc_init_f (void)
 {
 	volatile immap_t *immap = (immap_t *) CFG_IMMR;
 	volatile memctl8260_t *memctl = &immap->im_memctl;
@@ -465,7 +362,8 @@ int misc_init_f (void)
 
 /* ------------------------------------------------------------------------- */
 
-long initdram (int board_type)
+long
+initdram (int board_type)
 {
 	volatile immap_t *immap = (immap_t *) CFG_IMMR;
 	volatile memctl8260_t *memctl = &immap->im_memctl;
@@ -523,280 +421,95 @@ long initdram (int board_type)
 /* containing information to be stored in the eeprom from the tftp server    */
 /* (the file name is based on the serial number and a built-in path)	     */
 
-/* these are relative to the root of the server's tftp directory */
-static char *bddb_cfgdir = "/hymod/bddb";
-static char *global_env_path = "/hymod/global_env";
-
-static ulong get_serno (const char *prompt)
-{
-	for (;;) {
-		int n;
-		char *p;
-		ulong serno;
-
-		n = readline (prompt);
-
-		if (n < 0)
-			return (0);
-
-		if (n == 0)
-			continue;
-
-		serno = simple_strtol (console_buffer, &p, 10);
-
-		if (p > console_buffer && *p == '\0')
-			return (serno);
-
-		printf ("Invalid number (%s) - please re-enter\n", console_buffer);
-	}
-}
-
-static int read_eeprom (char *label, unsigned offset, hymod_eeprom_t * ep)
-{
-	char filename[50], prompt[50];
-	ulong serno;
-	int count = 0;
-
-	sprintf (prompt, "Enter %s board serial number: ", label);
-
-	for (;;) {
-
-		if (eeprom_load (offset, ep))
-			return (1);
-
-		printf ("*** %s board EEPROM contents are %sinvalid\n",
-				label, count == 0 ? "" : "STILL ");
-
-		puts ("*** will attempt to fetch from server (Ctrl-C to abort)\n");
-
-		if ((serno = get_serno (prompt)) == 0) {
-			puts ("\n*** interrupted! - ignoring eeprom contents\n");
-			return (0);
-		}
-
-		sprintf (filename, "%s/%010lu.cfg", bddb_cfgdir, serno);
-
-		printf ("*** fetching %s board EEPROM contents from server\n",
-				label);
-
-		if (eeprom_fetch (offset, filename, 0x100000) == 0) {
-			puts ("*** fetch failed - ignoring eeprom contents\n");
-			return (0);
-		}
-
-		count++;
-	}
-}
-
-static ulong main_serno;
-
-static int env_fetch_callback (uchar * name, uchar * value)
-{
-	char *ov, nv[CFG_CBSIZE], *p, *q, *nn;
-	int override = 1, append = 0, nl;
-
-	nn = name;
-	if (*nn == '-') {
-		override = 0;
-		nn++;
-	}
-
-	if ((nl = strlen (nn)) > 0 && nn[nl - 1] == '+') {
-		append = 1;
-		nn[--nl] = '\0';
-	}
-
-	p = value;
-	q = nv;
-
-	while ((*q = *p++) != '\0')
-		if (*q == '%') {
-			switch (*p++) {
-
-			case '\0':			/* whoops - back up */
-				p--;
-				break;
-
-			case '%':			/* a single percent character */
-				q++;
-				break;
-
-			case 's':			/* main board serial number as string */
-				q += sprintf (q, "%010lu", main_serno);
-				break;
-
-			case 'S':			/* main board serial number as number */
-				q += sprintf (q, "%lu", main_serno);
-				break;
-
-			default:			/* ignore any others */
-				break;
-			}
-		} else
-			q++;
-
-	if ((ov = getenv (nn)) != NULL) {
-
-		if (append) {
-
-			if (strstr (ov, nv) == NULL) {
-				int ovl, nvl;
-
-				printf ("Appending '%s' to env cmd '%s'\n", nv, nn);
-
-				ovl = strlen (ov);
-				nvl = strlen (nv);
-
-				while (nvl >= 0) {
-					nv[ovl + 1 + nvl] = nv[nvl];
-					nvl--;
-				}
-
-				nv[ovl] = ' ';
-
-				while (--ovl >= 0)
-					nv[ovl] = ov[ovl];
-
-				setenv (nn, nv);
-			}
-
-			return (1);
-		}
-
-		if (!override || strcmp (ov, nv) == 0)
-			return (1);
-
-		printf ("Re-setting env cmd '%s' from '%s' to '%s'\n", nn, ov, nv);
-	} else
-		printf ("Setting env cmd '%s' to '%s'\n", nn, nv);
-
-	setenv (nn, nv);
-	return (1);
-}
-
-int misc_init_r (void)
+int
+last_stage_init (void)
 {
 	DECLARE_GLOBAL_DATA_PTR;
 
 	hymod_conf_t *cp = &gd->bd->bi_hymod_conf;
 	int rc;
 
+#ifdef CONFIG_BOOT_RETRY_TIME
+	/*
+	 * we use the readline () function, but we also want
+	 * command timeout enabled
+	 */
+	init_cmd_timeout ();
+#endif
+
 	memset ((void *) cp, 0, sizeof (*cp));
 
 	/* set up main board config info */
 
-	if (i2c_probe (CFG_I2C_EEPROM_ADDR | HYMOD_EEOFF_MAIN)) {
-
-		if (read_eeprom
-			("main", HYMOD_EEOFF_MAIN << 8, &cp->main.eeprom))
-			cp->main.eeprom_valid = 1;
-
-		puts ("EEPROM:main...");
-
-		if (cp->main.eeprom_valid) {
-			printf ("OK (ver %u)\n", cp->main.eeprom.ver);
-			eeprom_print (&cp->main.eeprom);
-			main_serno = cp->main.eeprom.serno;
-		} else
-			puts ("BAD\n");
-
-		cp->main.mmap[0].prog.exists = 1;
-		cp->main.mmap[0].prog.size = FPGA_MAIN_CFG_SIZE;
-		cp->main.mmap[0].prog.base = FPGA_MAIN_CFG_BASE;
-
-		cp->main.mmap[0].reg.exists = 1;
-		cp->main.mmap[0].reg.size = FPGA_MAIN_REG_SIZE;
-		cp->main.mmap[0].reg.base = FPGA_MAIN_REG_BASE;
-
-		cp->main.mmap[0].port.exists = 1;
-		cp->main.mmap[0].port.size = FPGA_MAIN_PORT_SIZE;
-		cp->main.mmap[0].port.base = FPGA_MAIN_PORT_BASE;
-
-		cp->main.iopins[0].prog_pin.port = FPGA_MAIN_PROG_PORT;
-		cp->main.iopins[0].prog_pin.pin = FPGA_MAIN_PROG_PIN;
-		cp->main.iopins[0].prog_pin.flag = 1;
-		cp->main.iopins[0].init_pin.port = FPGA_MAIN_INIT_PORT;
-		cp->main.iopins[0].init_pin.pin = FPGA_MAIN_INIT_PIN;
-		cp->main.iopins[0].init_pin.flag = 1;
-		cp->main.iopins[0].done_pin.port = FPGA_MAIN_DONE_PORT;
-		cp->main.iopins[0].done_pin.pin = FPGA_MAIN_DONE_PIN;
-		cp->main.iopins[0].done_pin.flag = 1;
+	rc = hymod_eeprom_read (0, &cp->main.eeprom);
+
+	puts ("EEPROM:main...");
+	if (rc < 0)
+		puts ("NOT PRESENT\n");
+	else if (rc == 0)
+		puts ("INVALID\n");
+	else {
+		cp->main.eeprom.valid = 1;
+
+		printf ("OK (ver %u)\n", cp->main.eeprom.ver);
+		hymod_eeprom_print (&cp->main.eeprom);
+
+		/*
+		 * hard-wired assumption here: all hymod main boards will have
+		 * one xilinx fpga, with the interrupt line connected to IRQ2
+		 *
+		 * One day, this might be based on the board type
+		 */
+
+		cp->main.xlx[0].mmap.prog.exists = 1;
+		cp->main.xlx[0].mmap.prog.size = FPGA_MAIN_CFG_SIZE;
+		cp->main.xlx[0].mmap.prog.base = FPGA_MAIN_CFG_BASE;
+
+		cp->main.xlx[0].mmap.reg.exists = 1;
+		cp->main.xlx[0].mmap.reg.size = FPGA_MAIN_REG_SIZE;
+		cp->main.xlx[0].mmap.reg.base = FPGA_MAIN_REG_BASE;
+
+		cp->main.xlx[0].mmap.port.exists = 1;
+		cp->main.xlx[0].mmap.port.size = FPGA_MAIN_PORT_SIZE;
+		cp->main.xlx[0].mmap.port.base = FPGA_MAIN_PORT_BASE;
+
+		cp->main.xlx[0].iopins.prog_pin.port = FPGA_MAIN_PROG_PORT;
+		cp->main.xlx[0].iopins.prog_pin.pin = FPGA_MAIN_PROG_PIN;
+		cp->main.xlx[0].iopins.prog_pin.flag = 1;
+		cp->main.xlx[0].iopins.init_pin.port = FPGA_MAIN_INIT_PORT;
+		cp->main.xlx[0].iopins.init_pin.pin = FPGA_MAIN_INIT_PIN;
+		cp->main.xlx[0].iopins.init_pin.flag = 1;
+		cp->main.xlx[0].iopins.done_pin.port = FPGA_MAIN_DONE_PORT;
+		cp->main.xlx[0].iopins.done_pin.pin = FPGA_MAIN_DONE_PIN;
+		cp->main.xlx[0].iopins.done_pin.flag = 1;
 #ifdef FPGA_MAIN_ENABLE_PORT
-		cp->main.iopins[0].enable_pin.port = FPGA_MAIN_ENABLE_PORT;
-		cp->main.iopins[0].enable_pin.pin = FPGA_MAIN_ENABLE_PIN;
-		cp->main.iopins[0].enable_pin.flag = 1;
+		cp->main.xlx[0].iopins.enable_pin.port = FPGA_MAIN_ENABLE_PORT;
+		cp->main.xlx[0].iopins.enable_pin.pin = FPGA_MAIN_ENABLE_PIN;
+		cp->main.xlx[0].iopins.enable_pin.flag = 1;
 #endif
-	} else
-		puts ("EEPROM:main...NOT PRESENT\n");
 
-	/* set up mezzanine board config info */
-
-	if (i2c_probe (CFG_I2C_EEPROM_ADDR | HYMOD_EEOFF_MEZZ)) {
-
-		if (read_eeprom
-			("mezz", HYMOD_EEOFF_MEZZ << 8, &cp->mezz.eeprom))
-			cp->mezz.eeprom_valid = 1;
-
-		puts ("EEPROM:mezz...");
-
-		if (cp->mezz.eeprom_valid) {
-			printf ("OK (ver %u)\n", cp->mezz.eeprom.ver);
-			eeprom_print (&cp->mezz.eeprom);
-		} else
-			puts ("BAD\n");
-
-		cp->mezz.mmap[0].prog.exists = 1;
-		cp->mezz.mmap[0].prog.size = FPGA_MEZZ_CFG_SIZE;
-		cp->mezz.mmap[0].prog.base = FPGA_MEZZ_CFG_BASE;
-
-		cp->mezz.mmap[0].reg.exists = 0;
-
-		cp->mezz.mmap[0].port.exists = 0;
-
-		cp->mezz.iopins[0].prog_pin.port = FPGA_MEZZ_PROG_PORT;
-		cp->mezz.iopins[0].prog_pin.pin = FPGA_MEZZ_PROG_PIN;
-		cp->mezz.iopins[0].prog_pin.flag = 1;
-		cp->mezz.iopins[0].init_pin.port = FPGA_MEZZ_INIT_PORT;
-		cp->mezz.iopins[0].init_pin.pin = FPGA_MEZZ_INIT_PIN;
-		cp->mezz.iopins[0].init_pin.flag = 1;
-		cp->mezz.iopins[0].done_pin.port = FPGA_MEZZ_DONE_PORT;
-		cp->mezz.iopins[0].done_pin.pin = FPGA_MEZZ_DONE_PIN;
-		cp->mezz.iopins[0].done_pin.flag = 1;
-#ifdef FPGA_MEZZ_ENABLE_PORT
-		cp->mezz.iopins[0].enable_pin.port = FPGA_MEZZ_ENABLE_PORT;
-		cp->mezz.iopins[0].enable_pin.pin = FPGA_MEZZ_ENABLE_PIN;
-		cp->mezz.iopins[0].enable_pin.flag = 1;
-#endif
+		cp->main.xlx[0].irq = FPGA_MAIN_IRQ;
+	}
 
-		if (cp->mezz.eeprom_valid &&
-			cp->mezz.eeprom.bdtype == HYMOD_BDTYPE_DISPLAY) {
-			/*
-			 * mezzanine board is a display board - switch the SEL_CD
-			 * input of the FS6377 clock generator (via I/O Port Pin PA11) to
-			 * high (or 1) to select the 27MHz required by the display board
-			 */
-			iopin_set_high (&pa11);
+	/* set up mezzanine board config info */
 
-			puts ("SEL_CD:toggled for display board\n");
-		}
-	} else
-		puts ("EEPROM:mezz...NOT PRESENT\n");
+	rc = hymod_eeprom_read (1, &cp->mezz.eeprom);
 
-	cp->crc =
-			crc32 (0, (unsigned char *) cp, offsetof (hymod_conf_t, crc));
+	puts ("EEPROM:mezz...");
+	if (rc < 0)
+		puts ("NOT PRESENT\n");
+	else if (rc == 0)
+		puts ("INVALID\n");
+	else {
+		cp->main.eeprom.valid = 1;
 
-	if (getenv ("global_env_loaded") == NULL) {
+		printf ("OK (ver %u)\n", cp->mezz.eeprom.ver);
+		hymod_eeprom_print (&cp->mezz.eeprom);
+	}
 
-		puts ("*** global environment has not been loaded\n");
-		puts ("*** fetching from server (Control-C to Abort)\n");
+	cp->crc = crc32 (0, (unsigned char *)cp, offsetof (hymod_conf_t, crc));
 
-		rc = fetch_and_parse (global_env_path, 0x100000,
-							  env_fetch_callback);
+	hymod_check_env ();
 
-		if (rc == 0)
-			puts ("*** Fetch of environment failed!\n");
-		else
-			setenv ("global_env_loaded", "yes");
-	}
 	return (0);
 }
diff --git a/board/hymod/hymod.h b/board/hymod/hymod.h
new file mode 100644
index 0000000..9d8d662
--- /dev/null
+++ b/board/hymod/hymod.h
@@ -0,0 +1,322 @@
+/*
+ * (C) Copyright 2001
+ * Murray Jensen, CSIRO-MIT, <Murray.Jensen@csiro.au>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _HYMOD_H_
+#define _HYMOD_H_
+
+#include <linux/config.h>
+#ifdef CONFIG_8260
+#include <asm/iopin_8260.h>
+#endif
+
+/*
+ * hymod configuration data - passed by boot code via the board information
+ * structure (only U-Boot has support for this at the moment)
+ *
+ * there are three types of data passed up from the boot monitor. the first
+ * (type hymod_eeprom_t) is the eeprom data that was read off both the main
+ * (or mother) board and the mezzanine board (if any). this data defines how
+ * many Xilinx fpgas are on each board, and their types (among other things).
+ * the second type of data (type xlx_mmap_t, one per Xilinx fpga) defines where
+ * in the physical address space the various Xilinx fpga access regions have
+ * been mapped by the boot rom. the third type of data (type xlx_iopins_t,
+ * one per Xilinx fpga) defines which io port pins are connected to the various
+ * signals required to program a Xilinx fpga.
+ *
+ * A ram/flash "bank" refers to memory controlled by the same chip select.
+ *
+ * the eeprom contents are defined as in technical note #2 - basically,
+ * a header, zero or more records in no particular order, and a 32 bit crc
+ * a record is 1 or more type bytes, a length byte and "length" bytes.
+ */
+
+#define HYMOD_EEPROM_ID		0xAA	/* eeprom id byte */
+#define HYMOD_EEPROM_VER	1	/* eeprom contents version (0-127) */
+#define HYMOD_EEPROM_SIZE	256	/* number of bytes in the eeprom */
+
+/* eeprom header */
+typedef
+    struct {
+	unsigned char id;		/* eeprom id byte */
+	unsigned char :1;
+	unsigned char ver:7;		/* eeprom contents version number */
+	unsigned long len;		/* total # of bytes btw hdr and crc */
+    }
+hymod_eehdr_t;
+
+/* maximum number of bytes available for eeprom data records */
+#define HYMOD_EEPROM_MAXLEN	(HYMOD_EEPROM_SIZE \
+					- sizeof (hymod_eehdr_t) \
+					- sizeof (unsigned long))
+
+/* eeprom data record */
+typedef
+    union {
+	struct {
+	    unsigned char topbit:1;
+	    unsigned char type:7;
+	    unsigned char len;
+	    unsigned char data[1];	/* variable length */
+	} small;
+	struct {
+	    unsigned short topbit:1;
+	    unsigned short nxtbit:1;
+	    unsigned short type:14;
+	    unsigned short len;
+	    unsigned char data[1];	/* variable length */
+	} medium;
+	struct {
+	    unsigned long topbit:1;
+	    unsigned long nxtbit:1;
+	    unsigned long type:30;
+	    unsigned long len;
+	    unsigned char data[1];	/* variable length */
+	} large;
+    }
+hymod_eerec_t;
+
+#define HYMOD_EEOFF_MAIN	0x00	/* i2c addr offset for main eeprom */
+#define HYMOD_EEOFF_MEZZ	0x04	/* i2c addr offset for mezz eepomr */
+
+/* eeprom record types */
+#define HYMOD_EEREC_SERNO	1	/* serial number */
+#define HYMOD_EEREC_DATE	2	/* date */
+#define HYMOD_EEREC_BATCH	3	/* batch id */
+#define HYMOD_EEREC_TYPE	4	/* board type */
+#define HYMOD_EEREC_REV		5	/* revision number */
+#define HYMOD_EEREC_SDRAM	6	/* sdram sizes */
+#define HYMOD_EEREC_FLASH	7	/* flash sizes */
+#define HYMOD_EEREC_ZBT		8	/* zbt ram sizes */
+#define HYMOD_EEREC_XLXTYP	9	/* Xilinx fpga types */
+#define HYMOD_EEREC_XLXSPD	10	/* Xilinx fpga speeds */
+#define HYMOD_EEREC_XLXTMP	11	/* Xilinx fpga temperatures */
+#define HYMOD_EEREC_XLXGRD	12	/* Xilinx fpga grades */
+#define HYMOD_EEREC_CPUTYP	13	/* Motorola CPU type */
+#define HYMOD_EEREC_CPUSPD	14	/* CPU speed */
+#define HYMOD_EEREC_BUSSPD	15	/* bus speed */
+#define HYMOD_EEREC_CPMSPD	16	/* CPM speed */
+#define HYMOD_EEREC_HSTYPE	17	/* high-speed serial chip type */
+#define HYMOD_EEREC_HSCHIN	18	/* high-speed serial input channels */
+#define HYMOD_EEREC_HSCHOUT	19	/* high-speed serial output channels */
+
+/* some dimensions */
+#define HYMOD_MAX_BATCH		32	/* max no. of bytes in batch id */
+#define HYMOD_MAX_SDRAM		4	/* max sdram "banks" on any board */
+#define HYMOD_MAX_FLASH		4	/* max flash "banks" on any board */
+#define HYMOD_MAX_ZBT		16	/* max ZBT rams on any board */
+#define HYMOD_MAX_XLX		4	/* max Xilinx fpgas on any board */
+
+#define HYMOD_MAX_BYTES		16	/* enough to store any bytes array */
+
+/* board types */
+#define HYMOD_BDTYPE_NONE	0	/* information not present */
+#define HYMOD_BDTYPE_IO		1	/* I/O main board */
+#define HYMOD_BDTYPE_CLP	2	/* CLP main board */
+#define HYMOD_BDTYPE_DSP	3	/* DSP main board */
+#define HYMOD_BDTYPE_INPUT	4	/* video input mezzanine board */
+#define HYMOD_BDTYPE_ALTINPUT	5	/* video input mezzanine board */
+#define HYMOD_BDTYPE_DISPLAY	6	/* video display mezzanine board */
+#define HYMOD_BDTYPE_MAX	7	/* first invalid value */
+
+/* Xilinx fpga types */
+#define HYMOD_XTYP_NONE		0	/* information not present */
+#define HYMOD_XTYP_XCV300E	1	/* Xilinx Virtex 300 */
+#define HYMOD_XTYP_XCV400E	2	/* Xilinx Virtex 400 */
+#define HYMOD_XTYP_XCV600E	3	/* Xilinx Virtex 600 */
+#define HYMOD_XTYP_MAX		4	/* first invalid value */
+
+/* Xilinx fpga speeds */
+#define HYMOD_XSPD_NONE		0	/* information not present */
+#define HYMOD_XSPD_SIX		1
+#define HYMOD_XSPD_SEVEN	2
+#define HYMOD_XSPD_EIGHT	3
+#define HYMOD_XSPD_MAX		4	/* first invalid value */
+
+/* Xilinx fpga temperatures */
+#define HYMOD_XTMP_NONE		0	/* information not present */
+#define HYMOD_XTMP_COM		1
+#define HYMOD_XTMP_IND		2
+#define HYMOD_XTMP_MAX		3	/* first invalid value */
+
+/* Xilinx fpga grades */
+#define HYMOD_XTMP_NONE		0	/* information not present */
+#define HYMOD_XTMP_NORMAL	1
+#define HYMOD_XTMP_ENGSAMP	2
+#define HYMOD_XTMP_MAX		3	/* first invalid value */
+
+/* CPU types */
+#define HYMOD_CPUTYPE_NONE	0	/* information not present */
+#define HYMOD_CPUTYPE_MPC8260	1	/* Motorola MPC8260 embedded powerpc */
+#define HYMOD_CPUTYPE_MAX	2	/* first invalid value */
+
+/* CPU/BUS/CPM clock speeds */
+#define HYMOD_CLKSPD_NONE	0	/* information not present */
+#define HYMOD_CLKSPD_33MHZ	1
+#define HYMOD_CLKSPD_66MHZ	2
+#define HYMOD_CLKSPD_100MHZ	3
+#define HYMOD_CLKSPD_133MHZ	4
+#define HYMOD_CLKSPD_166MHZ	5
+#define HYMOD_CLKSPD_200MHZ	6
+#define HYMOD_CLKSPD_MAX	7	/* first invalid value */
+
+/* high speed serial chip types */
+#define HYMOD_HSSTYPE_NONE	0	/* information not present */
+#define HYMOD_HSSTYPE_AMCC52064	1
+#define HYMOD_HSSTYPE_MAX	2	/* first invalid value */
+
+/* a date (yyyy-mm-dd) */
+typedef
+    struct {
+	unsigned short year;
+	unsigned char month;
+	unsigned char day;
+    }
+hymod_date_t;
+
+/* describes a Xilinx fpga */
+typedef
+    struct {
+	unsigned char type;		/* chip type */
+	unsigned char speed;		/* chip speed rating */
+	unsigned char temp;		/* chip temperature rating */
+	unsigned char grade;		/* chip grade */
+    }
+hymod_xlx_t;
+
+/* describes a Motorola embedded processor */
+typedef
+    struct {
+	unsigned char type;		/* CPU type */
+	unsigned char cpuspd;		/* speed of the PowerPC core */
+	unsigned char busspd;		/* speed of the system and 60x bus */
+	unsigned char cpmspd;		/* speed of the CPM co-processor */
+    }
+hymod_mpc_t;
+
+/* info about high-speed (1Gbit) serial interface */
+typedef
+    struct {
+	unsigned char type;		/* high-speed serial chip type */
+	unsigned char nchin;		/* number of input channels mounted */
+	unsigned char nchout;		/* number of output channels mounted */
+    }
+hymod_hss_t;
+
+/*
+ * this defines the contents of the serial eeprom that exists on every
+ * hymod board, including mezzanine boards (the serial eeprom will be
+ * faked for early development boards that don't have one)
+ */
+
+typedef
+    struct {
+	unsigned char valid:1;		/* contents of this struct is valid */
+	unsigned char ver:7;		/* eeprom contents version */
+	unsigned char bdtype;		/* board type */
+	unsigned char bdrev;		/* board revision */
+	unsigned char batchlen;		/* length of batch string below */
+	unsigned long serno;		/* serial number */
+	hymod_date_t date;		/* manufacture date */
+	unsigned char batch[32];	/* manufacturer specific batch id */
+	unsigned char nsdram;		/* # of ram "banks" */
+	unsigned char nflash;		/* # of flash "banks" */
+	unsigned char nzbt;		/* # of ZBT rams */
+	unsigned char nxlx;		/* # of Xilinx fpgas */
+	unsigned char sdramsz[HYMOD_MAX_SDRAM];	/* log2 of sdram size */
+	unsigned char flashsz[HYMOD_MAX_FLASH];	/* log2 of flash size */
+	unsigned char zbtsz[HYMOD_MAX_ZBT];	/* log2 of ZBT ram size */
+	hymod_xlx_t xlx[HYMOD_MAX_XLX];	/* Xilinx fpga info */
+	hymod_mpc_t mpc;		/* Motorola MPC CPU info */
+	hymod_hss_t hss;		/* high-speed serial info */
+    }
+hymod_eeprom_t;
+
+/*
+ * this defines a region in the processor's physical address space
+ */
+typedef
+    struct {
+	unsigned long exists:1;		/* 1 if the region exists, 0 if not */
+	unsigned long size:31;		/* size in bytes */
+	unsigned long base;		/* base address */
+    }
+xlx_prgn_t;
+
+/*
+ * this defines where the various Xilinx fpga access regions are mapped
+ * into the physical address space of the processor
+ */
+typedef
+    struct {
+	xlx_prgn_t prog;		/* program access region */
+	xlx_prgn_t reg;			/* register access region */
+	xlx_prgn_t port;		/* port access region */
+    }
+xlx_mmap_t;
+
+/*
+ * this defines which 8260 i/o port pins are connected to the various
+ * signals required for programming a Xilinx fpga
+ */
+typedef
+    struct {
+	iopin_t prog_pin;		/* assert for >= 300ns to program */
+	iopin_t init_pin;		/* goes high when fpga is cleared */
+	iopin_t done_pin;		/* goes high when program is done */
+	iopin_t enable_pin;		/* some fpgas need enabling */
+    }
+xlx_iopins_t;
+
+/* all info about one Xilinx chip */
+typedef
+    struct {
+	xlx_mmap_t mmap;
+	xlx_iopins_t iopins;
+	unsigned long irq:8;		/* h/w intr req number for this fpga */
+    }
+xlx_info_t;
+
+/* all info about one hymod board */
+typedef
+    struct {
+	hymod_eeprom_t eeprom;
+	xlx_info_t xlx[HYMOD_MAX_XLX];
+    }
+hymod_board_t;
+
+/*
+ * this defines the configuration information of a hymod board-set
+ * (main board + possible mezzanine board). In future, there may be
+ * more than one mezzanine board (stackable?) - if so, add a "mezz2"
+ * field, and so on... or make mezz an array?
+ */
+typedef
+    struct {
+	unsigned long ver:8;		/* version control */
+	hymod_board_t main;		/* main board info */
+	hymod_board_t mezz;		/* mezzanine board info */
+	unsigned long crc;		/* ensures kernel and boot prom agree */
+    }
+hymod_conf_t;
+
+#endif /* _HYMOD_H_ */
diff --git a/board/hymod/input.c b/board/hymod/input.c
new file mode 100644
index 0000000..63aa13c
--- /dev/null
+++ b/board/hymod/input.c
@@ -0,0 +1,113 @@
+/*
+ * (C) Copyright 2003
+ * Murray Jensen, CSIRO-MIT, <Murray.Jensen@csiro.au>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/* imports from common/main.c */
+extern char console_buffer[CFG_CBSIZE];
+
+int
+hymod_get_serno (const char *prompt)
+{
+	for (;;) {
+		int n, serno;
+		char *p;
+
+#ifdef CONFIG_BOOT_RETRY_TIME
+		reset_cmd_timeout ();
+#endif
+
+		n = readline (prompt);
+
+		if (n < 0)
+			return (n);
+
+		if (n == 0)
+			continue;
+
+		serno = (int) simple_strtol (console_buffer, &p, 10);
+
+		if (p > console_buffer && *p == '\0' && serno > 0)
+			return (serno);
+
+		printf ("Invalid number (%s) - please re-enter\n",
+			console_buffer);
+	}
+}
+
+int
+hymod_get_ethaddr (void)
+{
+	for (;;) {
+		int n;
+
+#ifdef CONFIG_BOOT_RETRY_TIME
+		reset_cmd_timeout ();
+#endif
+
+		n = readline ("Enter board ethernet address: ");
+
+		if (n < 0)
+			return (n);
+
+		if (n == 0)
+			continue;
+
+		if (n == 17) {
+			int i;
+			char *p, *q;
+			uchar ea[6];
+
+			/* see if it looks like an ethernet address */
+
+			p = console_buffer;
+
+			for (i = 0; i < 6; i++) {
+				char term = (i == 5 ? '\0' : ':');
+
+				ea[i] = simple_strtol (p, &q, 16);
+
+				if ((q - p) != 2 || *q++ != term)
+					break;
+
+				p = q;
+			}
+
+			if (i == 6) {
+				/* it looks ok - set it */
+				printf ("Setting ethernet addr to %s\n",
+					console_buffer);
+
+				setenv ("ethaddr", console_buffer);
+
+				puts ("Remember to do a 'saveenv' to "
+					"make it permanent\n");
+
+				return (0);
+			}
+		}
+
+		printf ("Invalid ethernet addr (%s) - please re-enter\n",
+			console_buffer);
+	}
+}
diff --git a/common/cmd_eeprom.c b/common/cmd_eeprom.c
index 32bab1a..3db0bca 100644
--- a/common/cmd_eeprom.c
+++ b/common/cmd_eeprom.c
@@ -327,6 +327,26 @@ int eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cn
 	return rcode;
 }
 
+#ifndef CONFIG_SPI
+int
+eeprom_probe (unsigned dev_addr, unsigned offset)
+{
+	unsigned char chip;
+
+	/* Probe the chip address
+	 */
+#if CFG_I2C_EEPROM_ADDR_LEN == 1 && !defined(CONFIG_SPI_X)
+	chip = offset >> 8;		/* block number */
+#else
+	chip = offset >> 16;		/* block number */
+#endif	/* CFG_I2C_EEPROM_ADDR_LEN, CONFIG_SPI_X */
+
+	chip |= dev_addr;		/* insert device address */
+
+	return (i2c_probe (chip));
+}
+#endif
+
 /*-----------------------------------------------------------------------
  * Set default values
  */
diff --git a/common/console.c b/common/console.c
index 86ed584..8c94aa7 100644
--- a/common/console.c
+++ b/common/console.c
@@ -232,6 +232,20 @@ void printf (const char *fmt, ...)
 	puts (printbuffer);
 }
 
+void vprintf (const char *fmt, va_list args)
+{
+	uint i;
+	char printbuffer[CFG_PBSIZE];
+
+	/* For this to work, printbuffer must be larger than
+	 * anything we ever want to print.
+	 */
+	i = vsprintf (printbuffer, fmt, args);
+
+	/* Print the string */
+	puts (printbuffer);
+}
+
 /* test if ctrl-c was pressed */
 static int ctrlc_disabled = 0;	/* see disable_ctrl() */
 static int ctrlc_was_pressed = 0;
diff --git a/common/main.c b/common/main.c
index 6192dff..f538870 100644
--- a/common/main.c
+++ b/common/main.c
@@ -319,13 +319,7 @@ void main_loop (void)
 	debug ("### main_loop entered: bootdelay=%d\n\n", bootdelay);
 
 # ifdef CONFIG_BOOT_RETRY_TIME
-	s = getenv ("bootretry");
-	if (s != NULL)
-		retry_time = (int)simple_strtoul(s, NULL, 10);
-	else
-		retry_time =  CONFIG_BOOT_RETRY_TIME;
-	if (retry_time >= 0 && retry_time < CONFIG_BOOT_RETRY_MIN)
-		retry_time = CONFIG_BOOT_RETRY_MIN;
+	init_cmd_timeout ();
 # endif	/* CONFIG_BOOT_RETRY_TIME */
 
 	s = getenv ("bootcmd");
@@ -422,10 +416,26 @@ void main_loop (void)
 #endif /*CFG_HUSH_PARSER*/
 }
 
+#ifdef CONFIG_BOOT_RETRY_TIME
+/***************************************************************************
+ * initialise command line timeout
+ */
+void init_cmd_timeout(void)
+{
+	char *s = getenv ("bootretry");
+
+	if (s != NULL)
+		retry_time = (int)simple_strtoul(s, NULL, 10);
+	else
+		retry_time =  CONFIG_BOOT_RETRY_TIME;
+
+	if (retry_time >= 0 && retry_time < CONFIG_BOOT_RETRY_MIN)
+		retry_time = CONFIG_BOOT_RETRY_MIN;
+}
+
 /***************************************************************************
  * reset command line timeout to retry_time seconds
  */
-#ifdef CONFIG_BOOT_RETRY_TIME
 void reset_cmd_timeout(void)
 {
 	endtime = endtick(retry_time);
diff --git a/config.mk b/config.mk
index 92844b1..95b7256 100644
--- a/config.mk
+++ b/config.mk
@@ -96,9 +96,11 @@ RANLIB	= $(CROSS_COMPILE)RANLIB
 RELFLAGS= $(PLATFORM_RELFLAGS)
 DBGFLAGS= -g #-DDEBUG
 OPTFLAGS= -Os #-fomit-frame-pointer
+ifndef LDSCRIPT
 #LDSCRIPT := board/$(BOARDDIR)/u-boot.lds.debug
 LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/u-boot.lds
-OBJCFLAGS := --gap-fill=0xff
+endif
+OBJCFLAGS += --gap-fill=0xff
 
 CPPFLAGS := $(DBGFLAGS) $(OPTFLAGS) $(RELFLAGS)		\
 	-D__KERNEL__ -DTEXT_BASE=$(TEXT_BASE)		\
diff --git a/cpu/mpc8260/cpu_init.c b/cpu/mpc8260/cpu_init.c
index 46ac975..d0545cf 100644
--- a/cpu/mpc8260/cpu_init.c
+++ b/cpu/mpc8260/cpu_init.c
@@ -80,9 +80,9 @@ static void config_8260_ioports (volatile immap_t * immr)
 			 */
 			iop->ppar &= tpmsk;
 			iop->psor = (iop->psor & tpmsk) | psor;
+			iop->podr = (iop->podr & tpmsk) | podr;
 			iop->pdat = (iop->pdat & tpmsk) | pdat;
 			iop->pdir = (iop->pdir & tpmsk) | pdir;
-			iop->podr = (iop->podr & tpmsk) | podr;
 			iop->ppar |= ppar;
 		}
 	}
diff --git a/cpu/mpc8260/ether_fcc.c b/cpu/mpc8260/ether_fcc.c
index bd2fcc9..45dca73 100644
--- a/cpu/mpc8260/ether_fcc.c
+++ b/cpu/mpc8260/ether_fcc.c
@@ -391,4 +391,761 @@ int fec_initialize(bd_t *bis)
 	return 1;
 }
 
+#ifdef CONFIG_ETHER_LOOPBACK_TEST
+
+#define ELBT_BUFSZ	1024	/* must be multiple of 32 */
+
+#define ELBT_CRCSZ	4
+
+#define ELBT_NRXBD	4	/* must be at least 2 */
+#define ELBT_NTXBD	4
+
+#define ELBT_MAXRXERR	32
+#define ELBT_MAXTXERR	32
+
+#define ELBT_CLSWAIT	1000	/* msec to wait for further input frames */
+
+typedef
+	struct {
+		uint off;
+		char *lab;
+	}
+elbt_prdesc;
+
+typedef
+	struct {
+		uint _l, _f, m, bc, mc, lg, no, sh, cr, ov, cl;
+		uint badsrc, badtyp, badlen, badbit;
+	}
+elbt_rxeacc;
+
+static elbt_prdesc rxeacc_descs[] = {
+	{ offsetof(elbt_rxeacc, _l),		"Not Last in Frame"	},
+	{ offsetof(elbt_rxeacc, _f),		"Not First in Frame"	},
+	{ offsetof(elbt_rxeacc, m),		"Address Miss"		},
+	{ offsetof(elbt_rxeacc, bc),		"Broadcast Address"	},
+	{ offsetof(elbt_rxeacc, mc),		"Multicast Address"	},
+	{ offsetof(elbt_rxeacc, lg),		"Frame Length Violation"},
+	{ offsetof(elbt_rxeacc, no),		"Non-Octet Alignment"	},
+	{ offsetof(elbt_rxeacc, sh),		"Short Frame"		},
+	{ offsetof(elbt_rxeacc, cr),		"CRC Error"		},
+	{ offsetof(elbt_rxeacc, ov),		"Overrun"		},
+	{ offsetof(elbt_rxeacc, cl),		"Collision"		},
+	{ offsetof(elbt_rxeacc, badsrc),	"Bad Src Address"	},
+	{ offsetof(elbt_rxeacc, badtyp),	"Bad Frame Type"	},
+	{ offsetof(elbt_rxeacc, badlen),	"Bad Frame Length"	},
+	{ offsetof(elbt_rxeacc, badbit),	"Data Compare Errors"	},
+};
+static int rxeacc_ndesc = sizeof (rxeacc_descs) / sizeof (rxeacc_descs[0]);
+
+typedef
+	struct {
+		uint def, hb, lc, rl, rc, un, csl;
+	}
+elbt_txeacc;
+
+static elbt_prdesc txeacc_descs[] = {
+	{ offsetof(elbt_txeacc, def),		"Defer Indication"	},
+	{ offsetof(elbt_txeacc, hb),		"Heartbeat"		},
+	{ offsetof(elbt_txeacc, lc),		"Late Collision"	},
+	{ offsetof(elbt_txeacc, rl),		"Retransmission Limit"	},
+	{ offsetof(elbt_txeacc, rc),		"Retry Count"		},
+	{ offsetof(elbt_txeacc, un),		"Underrun"		},
+	{ offsetof(elbt_txeacc, csl),		"Carrier Sense Lost"	},
+};
+static int txeacc_ndesc = sizeof (txeacc_descs) / sizeof (txeacc_descs[0]);
+
+typedef
+	struct {
+		uchar rxbufs[ELBT_NRXBD][ELBT_BUFSZ];
+		uchar txbufs[ELBT_NTXBD][ELBT_BUFSZ];
+		cbd_t rxbd[ELBT_NRXBD];
+		cbd_t txbd[ELBT_NTXBD];
+		enum { Idle, Running, Closing, Closed } state;
+		int proff, page, sblock;
+		uint clstime, nsent, ntxerr, nrcvd, nrxerr;
+		ushort rxerrs[ELBT_MAXRXERR], txerrs[ELBT_MAXTXERR];
+		elbt_rxeacc rxeacc;
+		elbt_txeacc txeacc;
+	} __attribute__ ((aligned(8)))
+elbt_chan;
+
+static uchar patbytes[ELBT_NTXBD] = {
+	0xff, 0xaa, 0x55, 0x00
+};
+static uint patwords[ELBT_NTXBD] = {
+	0xffffffff, 0xaaaaaaaa, 0x55555555, 0x00000000
+};
+
+#ifdef __GNUC__
+static elbt_chan elbt_chans[3] __attribute__ ((aligned(8)));
+#else
+#error "elbt_chans must be 64-bit aligned"
+#endif
+
+#define CPM_CR_GRACEFUL_STOP_TX	((ushort)0x0005)
+
+static elbt_prdesc epram_descs[] = {
+	{ offsetof(fcc_enet_t, fen_crcec),	"CRC Errors"		},
+	{ offsetof(fcc_enet_t, fen_alec),	"Alignment Errors"	},
+	{ offsetof(fcc_enet_t, fen_disfc),	"Discarded Frames"	},
+	{ offsetof(fcc_enet_t, fen_octc),	"Octets"		},
+	{ offsetof(fcc_enet_t, fen_colc),	"Collisions"		},
+	{ offsetof(fcc_enet_t, fen_broc),	"Broadcast Frames"	},
+	{ offsetof(fcc_enet_t, fen_mulc),	"Multicast Frames"	},
+	{ offsetof(fcc_enet_t, fen_uspc),	"Undersize Frames"	},
+	{ offsetof(fcc_enet_t, fen_frgc),	"Fragments"		},
+	{ offsetof(fcc_enet_t, fen_ospc),	"Oversize Frames"	},
+	{ offsetof(fcc_enet_t, fen_jbrc),	"Jabbers"		},
+	{ offsetof(fcc_enet_t, fen_p64c),	"64 Octet Frames"	},
+	{ offsetof(fcc_enet_t, fen_p65c),	"65-127 Octet Frames"	},
+	{ offsetof(fcc_enet_t, fen_p128c),	"128-255 Octet Frames"	},
+	{ offsetof(fcc_enet_t, fen_p256c),	"256-511 Octet Frames"	},
+	{ offsetof(fcc_enet_t, fen_p512c),	"512-1023 Octet Frames"	},
+	{ offsetof(fcc_enet_t, fen_p1024c),	"1024-1518 Octet Frames"},
+};
+static int epram_ndesc = sizeof (epram_descs) / sizeof (epram_descs[0]);
+
+/*
+ * given an elbt_prdesc array and an array of base addresses, print
+ * each prdesc down the screen with the values fetched from each
+ * base address across the screen
+ */
+static void
+print_desc (elbt_prdesc descs[], int ndesc, uchar *bases[], int nbase)
+{
+	elbt_prdesc *dp = descs, *edp = dp + ndesc;
+	int i;
+
+	printf ("%32s", "");
+
+	for (i = 0; i < nbase; i++)
+		printf ("  Channel %d", i);
+
+	puts ("\n");
+
+	while (dp < edp) {
+
+		printf ("%-32s", dp->lab);
+
+		for (i = 0; i < nbase; i++) {
+			uint val = *(uint *)(bases[i] + dp->off);
+
+			printf (" %10u", val);
+		}
+
+		puts ("\n");
+
+		dp++;
+	}
+}
+
+/*
+ * return number of bits that are set in a value; value contains
+ * nbits (right-justified) bits.
+ */
+static uint __inline__
+nbs (uint value, uint nbits)
+{
+	uint cnt = 0;
+#if 1
+	uint pos = sizeof (uint) * 8;
+
+	__asm__ __volatile__ ("\
+	mtctr	%2\n\
+1:	rlwnm.	%2,%1,%4,31,31\n\
+	beq	2f\n\
+	addi	%0,%0,1\n\
+2:	subi	%4,%4,1\n\
+	bdnz	1b"
+	: "=r"(cnt)
+	: "r"(value), "r"(nbits), "r"(cnt), "r"(pos)
+	: "ctr", "cc" );
+#else
+	uint mask = 1;
+
+	do {
+		if (value & mask)
+			cnt++;
+		mask <<= 1;
+	} while (--nbits);
+#endif
+
+	return (cnt);
+}
+
+static ulong
+badbits (uchar *bp, int n, ulong pat)
+{
+	ulong *lp, cnt = 0;
+	int nl;
+
+	while (n > 0 && ((ulong)bp & (sizeof (ulong) - 1)) != 0) {
+		uchar diff;
+
+		diff = *bp++ ^ (uchar)pat;
+
+		if (diff)
+			cnt += nbs ((ulong)diff, 8);
+
+		n--;
+	}
+
+	lp = (ulong *)bp;
+	nl = n / sizeof (ulong);
+	n -= nl * sizeof (ulong);
+
+	while (nl > 0) {
+		ulong diff;
+
+		diff = *lp++ ^ pat;
+
+		if (diff)
+			cnt += nbs (diff, 32);
+
+		nl--;
+	}
+
+	bp = (uchar *)lp;
+
+	while (n > 0) {
+		uchar diff;
+
+		diff = *bp++ ^ (uchar)pat;
+
+		if (diff)
+			cnt += nbs ((ulong)diff, 8);
+
+		n--;
+	}
+
+	return (cnt);
+}
+
+static inline unsigned short
+swap16 (unsigned short x)
+{
+	return (((x & 0xff) << 8) | ((x & 0xff00) >> 8));
+}
+
+void
+eth_loopback_test (void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	volatile immap_t *immr = (immap_t *)CFG_IMMR;
+	volatile cpm8260_t *cp = &(immr->im_cpm);
+	int c, nclosed;
+	ulong runtime, nmsec;
+	uchar *bases[3];
+
+	puts ("FCC Ethernet External loopback test\n");
+
+	memcpy (NetOurEther, gd->bd->bi_enetaddr, 6);
+
+	/*
+	 * global initialisations for all FCC channels
+	 */
+
+	/* 28.9 - (1-2): ioports have been set up already */
+
+#if defined(CONFIG_HYMOD)
+	/*
+	 * Attention: this is board-specific
+	 * - FCC1 Rx-CLK is CLK10
+	 * - FCC1 Tx-CLK is CLK11
+	 * - FCC2 Rx-CLK is CLK13
+	 * - FCC2 Tx-CLK is CLK14
+	 * - FCC3 Rx-CLK is CLK15
+	 * - FCC3 Tx-CLK is CLK16
+	 */
+
+	/* 28.9 - (3): connect FCC's tx and rx clocks */
+	immr->im_cpmux.cmx_uar = 0;
+	immr->im_cpmux.cmx_fcr = CMXFCR_RF1CS_CLK10|CMXFCR_TF1CS_CLK11|\
+	    CMXFCR_RF2CS_CLK13|CMXFCR_TF2CS_CLK14|\
+	    CMXFCR_RF3CS_CLK15|CMXFCR_TF3CS_CLK16;
+#else
+#error "eth_loopback_test not supported on your board"
+#endif
+
+	puts ("Initialise FCC channels:");
+
+	for (c = 0; c < 3; c++) {
+		elbt_chan *ecp = &elbt_chans[c];
+		volatile fcc_t *fcp = &immr->im_fcc[c];
+		volatile fcc_enet_t *fpp;
+		int i;
+		ulong addr;
+
+		/*
+		 * initialise channel data
+		 */
+
+		printf (" %d", c);
+
+		memset ((void *)ecp, 0, sizeof (*ecp));
+
+		ecp->state = Idle;
+
+		switch (c) {
+
+		case 0: /* FCC1 */
+			ecp->proff = PROFF_FCC1;
+			ecp->page = CPM_CR_FCC1_PAGE;
+			ecp->sblock = CPM_CR_FCC1_SBLOCK;
+			break;
+
+		case 1: /* FCC2 */
+			ecp->proff = PROFF_FCC2;
+			ecp->page = CPM_CR_FCC2_PAGE;
+			ecp->sblock = CPM_CR_FCC2_SBLOCK;
+			break;
+
+		case 2: /* FCC3 */
+			ecp->proff = PROFF_FCC3;
+			ecp->page = CPM_CR_FCC3_PAGE;
+			ecp->sblock = CPM_CR_FCC3_SBLOCK;
+			break;
+		}
+
+		/*
+		 * set up tx buffers and bds
+		 */
+
+		for (i = 0; i < ELBT_NTXBD; i++) {
+			cbd_t *bdp = &ecp->txbd[i];
+			uchar *bp = &ecp->txbufs[i][0];
+
+			bdp->cbd_bufaddr = (uint)bp;
+			/* room for crc */
+			bdp->cbd_datlen = ELBT_BUFSZ - ELBT_CRCSZ;
+			bdp->cbd_sc = BD_ENET_TX_READY | BD_ENET_TX_PAD | \
+				BD_ENET_TX_LAST | BD_ENET_TX_TC;
+
+			memset ((void *)bp, patbytes[i], ELBT_BUFSZ);
+			NetSetEther (bp, NetBcastAddr, 0x8000);
+		}
+		ecp->txbd[ELBT_NTXBD - 1].cbd_sc |= BD_ENET_TX_WRAP;
+
+		/*
+		 * set up rx buffers and bds
+		 */
+
+		for (i = 0; i < ELBT_NRXBD; i++) {
+		    cbd_t *bdp = &ecp->rxbd[i];
+		    uchar *bp = &ecp->rxbufs[i][0];
+
+		    bdp->cbd_bufaddr = (uint)bp;
+		    bdp->cbd_datlen = 0;
+		    bdp->cbd_sc = BD_ENET_RX_EMPTY;
+
+		    memset ((void *)bp, 0, ELBT_BUFSZ);
+		}
+		ecp->rxbd[ELBT_NRXBD - 1].cbd_sc |= BD_ENET_RX_WRAP;
+
+		/*
+		 * set up the FCC channel hardware
+		 */
+
+		/* 28.9 - (4): GFMR: disable tx/rx, CCITT CRC, Mode Ethernet */
+		fcp->fcc_gfmr = FCC_GFMR_MODE_ENET | FCC_GFMR_TCRC_32;
+
+		/* 28.9 - (5): FPSMR: fd, enet CRC, Promis, RMON, Rx SHort */
+		fcp->fcc_fpsmr = FCC_PSMR_FDE | FCC_PSMR_LPB | \
+			FCC_PSMR_ENCRC | FCC_PSMR_PRO | \
+			FCC_PSMR_MON | FCC_PSMR_RSH;
+
+		/* 28.9 - (6): FDSR: Ethernet Syn */
+		fcp->fcc_fdsr = 0xD555;
+
+		/* 29.9 - (7): initialise parameter ram */
+		fpp = (fcc_enet_t *)&(immr->im_dprambase[ecp->proff]);
+
+		/* clear whole struct to make sure all resv fields are zero */
+		memset ((void *)fpp, 0, sizeof (fcc_enet_t));
+
+		/*
+		 * common Parameter RAM area
+		 *
+		 * Allocate space in the reserved FCC area of DPRAM for the
+		 * internal buffers.  No one uses this space (yet), so we
+		 * can do this.  Later, we will add resource management for
+		 * this area.
+		 */
+		addr = CPM_FCC_SPECIAL_BASE + (c * 64);
+		fpp->fen_genfcc.fcc_riptr = addr;
+		fpp->fen_genfcc.fcc_tiptr = addr + 32;
+
+		/*
+		 * Set maximum bytes per receive buffer.
+		 * It must be a multiple of 32.
+		 * buffers are in 60x bus memory.
+		 */
+		fpp->fen_genfcc.fcc_mrblr = PKT_MAXBLR_SIZE;
+		fpp->fen_genfcc.fcc_rstate = (CPMFCR_GBL | CPMFCR_EB) << 24;
+		fpp->fen_genfcc.fcc_rbase = (unsigned int)(&ecp->rxbd[0]);
+		fpp->fen_genfcc.fcc_tstate = (CPMFCR_GBL | CPMFCR_EB) << 24;
+		fpp->fen_genfcc.fcc_tbase = (unsigned int)(&ecp->txbd[0]);
+
+		/* protocol-specific area */
+		fpp->fen_cmask = 0xdebb20e3;	/* CRC mask */
+		fpp->fen_cpres = 0xffffffff;	/* CRC preset */
+		fpp->fen_retlim = 15;		/* Retry limit threshold */
+		fpp->fen_mflr = PKT_MAXBUF_SIZE;/* max frame length register */
+
+		/*
+		 * Set Ethernet station address.
+		 *
+		 * This is supplied in the board information structure, so we
+		 * copy that into the controller.
+		 * So, far we have only been given one Ethernet address. We use
+		 * the same address for all channels
+		 */
+#define ea gd->bd->bi_enetaddr
+		fpp->fen_paddrh = (ea[5] << 8) + ea[4];
+		fpp->fen_paddrm = (ea[3] << 8) + ea[2];
+		fpp->fen_paddrl = (ea[1] << 8) + ea[0];
+#undef ea
+
+		fpp->fen_minflr = PKT_MINBUF_SIZE; /* min frame len register */
+		/*
+		 * pad pointer. use tiptr since we don't need
+		 * a specific padding char
+		 */
+		fpp->fen_padptr = fpp->fen_genfcc.fcc_tiptr;
+		fpp->fen_maxd1 = PKT_MAXDMA_SIZE;	/* max DMA1 length */
+		fpp->fen_maxd2 = PKT_MAXDMA_SIZE;	/* max DMA2 length */
+		fpp->fen_rfthr = 1;
+		fpp->fen_rfcnt = 1;
+
+		/* 28.9 - (8): clear out events in FCCE */
+		fcp->fcc_fcce = ~0x0;
+
+		/* 28.9 - (9): FCCM: mask all events */
+		fcp->fcc_fccm = 0;
+
+		/* 28.9 - (10-12): we don't use ethernet interrupts */
+
+		/* 28.9 - (13)
+		 *
+		 * Let's re-initialize the channel now.  We have to do it later
+		 * than the manual describes because we have just now finished
+		 * the BD initialization.
+		 */
+		cp->cp_cpcr = mk_cr_cmd (ecp->page, ecp->sblock, \
+			0x0c, CPM_CR_INIT_TRX) | CPM_CR_FLG;
+		do {
+			__asm__ __volatile__ ("eieio");
+		} while (cp->cp_cpcr & CPM_CR_FLG);
+	}
+
+	puts (" done\nStarting test... (Ctrl-C to Finish)\n");
+
+	/*
+	 * Note: don't want serial output from here until the end of the
+	 * test - the delays would probably stuff things up.
+	 */
+
+	clear_ctrlc ();
+	runtime = get_timer (0);
+
+	do {
+		nclosed = 0;
+
+		for (c = 0; c < 3; c++) {
+			volatile fcc_t *fcp = &immr->im_fcc[c];
+			elbt_chan *ecp = &elbt_chans[c];
+			int i;
+
+			switch (ecp->state) {
+
+			case Idle:
+				/*
+				 * set the channel Running ...
+				 */
+
+				/* 28.9 - (14): enable tx/rx in gfmr */
+				fcp->fcc_gfmr |= FCC_GFMR_ENT | FCC_GFMR_ENR;
+
+				ecp->state = Running;
+				break;
+
+			case Running:
+				/*
+				 * (while Running only) check for
+				 * termination of the test
+				 */
+
+				(void)ctrlc ();
+
+				if (had_ctrlc ()) {
+					/*
+					 * initiate a "graceful stop transmit"
+					 * on the channel
+					 */
+					cp->cp_cpcr = mk_cr_cmd (ecp->page, \
+						ecp->sblock, 0x0c, \
+						CPM_CR_GRACEFUL_STOP_TX) | \
+						CPM_CR_FLG;
+					do {
+						__asm__ __volatile__ ("eieio");
+					} while (cp->cp_cpcr & CPM_CR_FLG);
+
+					ecp->clstime = get_timer (0);
+					ecp->state = Closing;
+				}
+				/* fall through ... */
+
+			case Closing:
+				/*
+				 * (while Running or Closing) poll the channel:
+				 * - check for any non-READY tx buffers and
+				 *   make them ready
+				 * - check for any non-EMPTY rx buffers and
+				 *   check that they were received correctly,
+				 *   adjust counters etc, then make empty
+				 */
+
+				for (i = 0; i < ELBT_NTXBD; i++) {
+					cbd_t *bdp = &ecp->txbd[i];
+					ushort sc = bdp->cbd_sc;
+
+					if ((sc & BD_ENET_TX_READY) != 0)
+						continue;
+
+					/*
+					 * this frame has finished
+					 * transmitting
+					 */
+					ecp->nsent++;
+
+					if (sc & BD_ENET_TX_STATS) {
+						ulong n;
+
+						/*
+						 * we had an error on
+						 * the transmission
+						 */
+						n = ecp->ntxerr++;
+						if (n < ELBT_MAXTXERR)
+							ecp->txerrs[n] = sc;
+
+						if (sc & BD_ENET_TX_DEF)
+							ecp->txeacc.def++;
+						if (sc & BD_ENET_TX_HB)
+							ecp->txeacc.hb++;
+						if (sc & BD_ENET_TX_LC)
+							ecp->txeacc.lc++;
+						if (sc & BD_ENET_TX_RL)
+							ecp->txeacc.rl++;
+						if (sc & BD_ENET_TX_RCMASK)
+							ecp->txeacc.rc++;
+						if (sc & BD_ENET_TX_UN)
+							ecp->txeacc.un++;
+						if (sc & BD_ENET_TX_CSL)
+							ecp->txeacc.csl++;
+
+						bdp->cbd_sc &= \
+							~BD_ENET_TX_STATS;
+					}
+
+					if (ecp->state == Closing)
+						ecp->clstime = get_timer (0);
+
+					/* make it ready again */
+					bdp->cbd_sc |= BD_ENET_TX_READY;
+				}
+
+				for (i = 0; i < ELBT_NRXBD; i++) {
+					cbd_t *bdp = &ecp->rxbd[i];
+					ushort sc = bdp->cbd_sc, mask;
+
+					if ((sc & BD_ENET_RX_EMPTY) != 0)
+						continue;
+
+					/* we have a new frame in this buffer */
+					ecp->nrcvd++;
+
+					mask = BD_ENET_RX_LAST|BD_ENET_RX_FIRST;
+					if ((sc & mask) != mask) {
+						/* somethings wrong here ... */
+						if (!(sc & BD_ENET_RX_LAST))
+							ecp->rxeacc._l++;
+						if (!(sc & BD_ENET_RX_FIRST))
+							ecp->rxeacc._f++;
+					}
+
+					if (sc & BD_ENET_RX_STATS) {
+						ulong n;
+
+						/*
+						 * we had some sort of error
+						 * on the frame
+						 */
+						n = ecp->nrxerr++;
+						if (n < ELBT_MAXRXERR)
+							ecp->rxerrs[n] = sc;
+
+						if (sc & BD_ENET_RX_MISS)
+							ecp->rxeacc.m++;
+						if (sc & BD_ENET_RX_BC)
+							ecp->rxeacc.bc++;
+						if (sc & BD_ENET_RX_MC)
+							ecp->rxeacc.mc++;
+						if (sc & BD_ENET_RX_LG)
+							ecp->rxeacc.lg++;
+						if (sc & BD_ENET_RX_NO)
+							ecp->rxeacc.no++;
+						if (sc & BD_ENET_RX_SH)
+							ecp->rxeacc.sh++;
+						if (sc & BD_ENET_RX_CR)
+							ecp->rxeacc.cr++;
+						if (sc & BD_ENET_RX_OV)
+							ecp->rxeacc.ov++;
+						if (sc & BD_ENET_RX_CL)
+							ecp->rxeacc.cl++;
+
+						bdp->cbd_sc &= \
+							~BD_ENET_RX_STATS;
+					}
+					else {
+						ushort datlen = bdp->cbd_datlen;
+						Ethernet_t *ehp;
+						ushort prot;
+						int ours, tb, n, nbytes;
+
+						ehp = (Ethernet_t *) \
+							&ecp->rxbufs[i][0];
+
+						ours = memcmp (ehp->et_src, \
+							NetOurEther, 6);
+
+						prot = swap16 (ehp->et_protlen);
+						tb = prot & 0x8000;
+						n = prot & 0x7fff;
+
+						nbytes = ELBT_BUFSZ - \
+							offsetof (Ethernet_t, \
+								et_dsap) - \
+							ELBT_CRCSZ;
+
+						/* check the frame is correct */
+						if (datlen != ELBT_BUFSZ)
+							ecp->rxeacc.badlen++;
+						else if (!ours)
+							ecp->rxeacc.badsrc++;
+						else if (!tb || n >= ELBT_NTXBD)
+							ecp->rxeacc.badtyp++;
+						else {
+							ulong patword = \
+								patwords[n];
+							uint nbb;
+
+							nbb = badbits ( \
+								&ehp->et_dsap, \
+								nbytes, \
+								patword);
+
+							ecp->rxeacc.badbit += \
+								nbb;
+						}
+					}
+
+					if (ecp->state == Closing)
+					    ecp->clstime = get_timer (0);
+
+					/* make it empty again */
+					bdp->cbd_sc |= BD_ENET_RX_EMPTY;
+				}
+
+				if (ecp->state != Closing)
+					break;
+
+				/*
+				 * (while Closing) check to see if
+				 * waited long enough
+				 */
+
+				if (get_timer (ecp->clstime) >= ELBT_CLSWAIT) {
+					/* write GFMR: disable tx/rx */
+					fcp->fcc_gfmr &= \
+						~(FCC_GFMR_ENT | FCC_GFMR_ENR);
+					ecp->state = Closed;
+				}
+
+				break;
+
+			case Closed:
+				nclosed++;
+				break;
+			}
+		}
+
+	} while (nclosed < 3);
+
+	runtime = get_timer (runtime);
+	if (runtime <= ELBT_CLSWAIT) {
+		printf ("Whoops! somehow elapsed time (%ld) is wrong (<= %d)\n",
+			runtime, ELBT_CLSWAIT);
+		return;
+	}
+	nmsec = runtime - ELBT_CLSWAIT;
+
+	printf ("Test Finished in %ldms (plus %dms close wait period)!\n\n",
+		nmsec, ELBT_CLSWAIT);
+
+	/*
+	 * now print stats
+	 */
+
+	for (c = 0; c < 3; c++) {
+		elbt_chan *ecp = &elbt_chans[c];
+		uint rxpps, txpps, nerr;
+
+		rxpps = (ecp->nrcvd * 1000) / nmsec;
+		txpps = (ecp->nsent * 1000) / nmsec;
+
+		printf ("Channel %d: %d rcvd (%d pps, %d rxerrs), "
+			"%d sent (%d pps, %d txerrs)\n\n", c,
+			ecp->nrcvd, rxpps, ecp->nrxerr,
+			ecp->nsent, txpps, ecp->ntxerr);
+
+		if ((nerr = ecp->nrxerr) > 0) {
+			ulong i;
+
+			printf ("\tFirst %d rx errs:", nerr);
+			for (i = 0; i < nerr; i++)
+				printf (" %04x", ecp->rxerrs[i]);
+			puts ("\n");
+		}
+
+		if ((nerr = ecp->ntxerr) > 0) {
+			ulong i;
+
+			printf ("\tFirst %d tx errs:", nerr);
+			for (i = 0; i < nerr; i++)
+				printf (" %04x", ecp->txerrs[i]);
+			puts ("\n");
+		}
+	}
+
+	puts ("Receive Error Counts:\n");
+	for (c = 0; c < 3; c++)
+		bases[c] = (uchar *)&elbt_chans[c].rxeacc;
+	print_desc (rxeacc_descs, rxeacc_ndesc, bases, 3);
+
+	puts ("\nTransmit Error Counts:\n");
+	for (c = 0; c < 3; c++)
+		bases[c] = (uchar *)&elbt_chans[c].txeacc;
+	print_desc (txeacc_descs, txeacc_ndesc, bases, 3);
+
+	puts ("\nRMON(-like) Counters:\n");
+	for (c = 0; c < 3; c++)
+		bases[c] = (uchar *)&immr->im_dprambase[elbt_chans[c].proff];
+	print_desc (epram_descs, epram_ndesc, bases, 3);
+}
+
+#endif /* CONFIG_ETHER_LOOPBACK_TEST */
+
 #endif	/* CONFIG_ETHER_ON_FCC && CFG_CMD_NET && CONFIG_NET_MULTI */
diff --git a/cpu/mpc8260/i2c.c b/cpu/mpc8260/i2c.c
index 2d65e32..69ae535 100644
--- a/cpu/mpc8260/i2c.c
+++ b/cpu/mpc8260/i2c.c
@@ -58,7 +58,7 @@
 /*-----------------------------------------------------------------------
  */
 
-typedef void (*i2c_ecb_t)(int, int);    /* error callback function */
+typedef void (*i2c_ecb_t)(int, int, void *);    /* error callback function */
 
 /* This structure keeps track of the bd and buffer space usage. */
 typedef struct i2c_state {
@@ -69,6 +69,7 @@ typedef struct i2c_state {
 	int		tx_space;	/* number  of Tx bytes left   */
 	unsigned char	*tx_buf;	/* pointer to free Tx area    */
 	i2c_ecb_t	err_cb;		/* error callback function    */
+	void		*cb_data;	/* private data to be passed  */
 } i2c_state_t;
 
 /* flags for i2c_send() and i2c_receive() */
@@ -77,14 +78,15 @@ typedef struct i2c_state {
 #define I2CF_STOP_COND		0x04	/* tx: generate stop  condition	*/
 
 /* return codes */
-#define I2CERR_NO_BUFFERS	0x01	/* no more BDs or buffer space	*/
-#define I2CERR_MSG_TOO_LONG	0x02	/* tried to send/receive to much data   */
-#define I2CERR_TIMEOUT		0x03	/* timeout in i2c_doio()	*/
-#define I2CERR_QUEUE_EMPTY	0x04	/* i2c_doio called without send/receive */
+#define I2CERR_NO_BUFFERS	1	/* no more BDs or buffer space	*/
+#define I2CERR_MSG_TOO_LONG	2	/* tried to send/receive to much data   */
+#define I2CERR_TIMEOUT		3	/* timeout in i2c_doio()	*/
+#define I2CERR_QUEUE_EMPTY	4	/* i2c_doio called without send/receive */
+#define I2CERR_IO_ERROR		5	/* had an error during comms	*/
 
 /* error callback flags */
 #define I2CECB_RX_ERR		0x10	/* this is a receive error	*/
-#define     I2CECB_RX_ERR_OV	0x02	/* receive overrun error	*/
+#define     I2CECB_RX_OV	0x02	/* receive overrun error	*/
 #define     I2CECB_RX_MASK	0x0f	/* mask for error bits		*/
 #define I2CECB_TX_ERR		0x20	/* this is a transmit error	*/
 #define     I2CECB_TX_CL	0x01	/* transmit collision error	*/
@@ -318,6 +320,7 @@ void i2c_newio(i2c_state_t *state)
 	state->tx_space = MAX_TX_SPACE;
 	state->tx_buf = (uchar*)state->txbd + NUM_TX_BDS * sizeof(I2C_BD);
 	state->err_cb = NULL;
+	state->cb_data = NULL;
 
 	PRINTD(("[I2C] rxbd = %08x\n", (int)state->rxbd));
 	PRINTD(("[I2C] txbd = %08x\n", (int)state->txbd));
@@ -491,14 +494,11 @@ int i2c_doio(i2c_state_t *state)
 	volatile iic_t *iip;
 	volatile i2c8260_t *i2c	= (i2c8260_t *)&immap->im_i2c;
 	volatile I2C_BD *txbd, *rxbd;
-	int  j;
-        int  timeout;
+        int  n, i, b, rxcnt = 0, rxtimeo = 0, txcnt = 0, txtimeo = 0, rc = 0;
 	uint dpaddr;
 
 	PRINTD(("[I2C] i2c_doio\n"));
 
-        timeout = TOUT_LOOP * 256;	/* arbitrarily long */
-
 	if (state->tx_idx <= 0 && state->rx_idx <= 0) {
 		PRINTD(("[I2C] No I/O is queued\n"));
 		return I2CERR_QUEUE_EMPTY;
@@ -518,14 +518,20 @@ int i2c_doio(i2c_state_t *state)
 
 	/* Loop until transmit & receive completed */
 
-	txbd = ((I2C_BD*)state->txbd) - 1;
-	j = 0;
-	if (state->tx_idx > 0) {
-        	timeout = TOUT_LOOP * txbd->length;
+	if ((n = state->tx_idx) > 0) {
+
+		txbd = ((I2C_BD*)state->txbd) - n;
+		for (i = 0; i < n; i++) {
+			txtimeo += TOUT_LOOP * txbd->length;
+			txbd++;
+		}
+
+		txbd--; /* wait until last in list is done */
 
 		PRINTD(("[I2C] Transmitting...(txbd=0x%08lx)\n", (ulong)txbd));
+
 		udelay(START_DELAY_US);	/* give it time to start */
-		while((txbd->status & BD_SC_READY) && (j++ < timeout)) {
+		while((txbd->status & BD_SC_READY) && (++txcnt < txtimeo)) {
 			udelay(DELAY_US);
 			if (ctrlc())
 				return (-1);
@@ -533,13 +539,20 @@ int i2c_doio(i2c_state_t *state)
 		}
 	}
 
-	rxbd = ((I2C_BD*)state->rxbd) - 1;
-	j = 0;
-	if ((state->rx_idx > 0) && (j < timeout)) {
-        	timeout = TOUT_LOOP * rxbd->length;
+	if (txcnt < txtimeo && (n = state->rx_idx) > 0) {
+
+		rxbd = ((I2C_BD*)state->rxbd) - n;
+		for (i = 0; i < n; i++) {
+        		rxtimeo += TOUT_LOOP * rxbd->length;
+			rxbd++;
+		}
+
+		rxbd--; /* wait until last in list is done */
+
 		PRINTD(("[I2C] Receiving...(rxbd=0x%08lx)\n", (ulong)rxbd));
+
 		udelay(START_DELAY_US);	/* give it time to start */
-		while((rxbd->status & BD_SC_EMPTY) && (j++ < timeout)) {
+		while((rxbd->status & BD_SC_EMPTY) && (++rxcnt < rxtimeo)) {
 			udelay(DELAY_US);
 			if (ctrlc())
 				return (-1);
@@ -550,76 +563,91 @@ int i2c_doio(i2c_state_t *state)
 	/* Turn off I2C */
 	i2c->i2c_i2mod &= ~0x01;
 
-	if (state->err_cb != NULL) {
-		int n, i, b;
-
-		/*
-		 * if we have an error callback function, look at the
-		 * error bits in the bd status and pass them back
-		 */
-
-		if ((n = state->tx_idx) > 0) {
-			for (i = 0; i < n; i++) {
-				txbd = ((I2C_BD*)state->txbd) - (n - i);
-				if ((b = txbd->status & BD_I2C_TX_ERR) != 0)
-					(*state->err_cb)(I2CECB_TX_ERR|b, i);
+	if ((n = state->tx_idx) > 0) {
+		for (i = 0; i < n; i++) {
+			txbd = ((I2C_BD*)state->txbd) - (n - i);
+			if ((b = txbd->status & BD_I2C_TX_ERR) != 0) {
+				if (state->err_cb != NULL)
+					(*state->err_cb)(I2CECB_TX_ERR|b, i,
+						state->cb_data);
+				if (rc == 0)
+					rc = I2CERR_IO_ERROR;
 			}
 		}
+	}
 
-		if ((n = state->rx_idx) > 0) {
-			for (i = 0; i < n; i++) {
-				rxbd = ((I2C_BD*)state->rxbd) - (n - i);
-				if ((b = rxbd->status & BD_I2C_RX_ERR) != 0)
-					(*state->err_cb)(I2CECB_RX_ERR|b, i);
+	if ((n = state->rx_idx) > 0) {
+		for (i = 0; i < n; i++) {
+			rxbd = ((I2C_BD*)state->rxbd) - (n - i);
+			if ((b = rxbd->status & BD_I2C_RX_ERR) != 0) {
+				if (state->err_cb != NULL)
+					(*state->err_cb)(I2CECB_RX_ERR|b, i,
+						state->cb_data);
+				if (rc == 0)
+					rc = I2CERR_IO_ERROR;
 			}
 		}
-
-		if (j >= timeout)
-			(*state->err_cb)(I2CECB_TIMEOUT, 0);
 	}
 
-	/* sort out errors and return appropriate good/error status */
-	if(j >= timeout)
-		return(I2CERR_TIMEOUT);
-	if((txbd->status & BD_I2C_TX_ERR) != 0)
-		return(I2CECB_TX_ERR | (txbd->status & I2CECB_TX_MASK));
-	if((rxbd->status & BD_I2C_RX_ERR) != 0)
-		return(I2CECB_RX_ERR | (rxbd->status & I2CECB_RX_MASK));
+	if ((txtimeo > 0 && txcnt >= txtimeo) || \
+	    (rxtimeo > 0 && rxcnt >= rxtimeo)) {
+		if (state->err_cb != NULL)
+			(*state->err_cb)(I2CECB_TIMEOUT, -1, state->cb_data);
+		if (rc == 0)
+			rc = I2CERR_TIMEOUT;
+	}
 
-	return(0);
+	return (rc);
 }
 
-static int had_tx_nak;
-
 static void
-i2c_test_callback(int flags, int xnum)
+i2c_probe_callback(int flags, int xnum, void *data)
 {
-	if ((flags & I2CECB_TX_ERR) && (flags & I2CECB_TX_NAK))
-		had_tx_nak = 1;
+	/*
+	 * the only acceptable errors are a transmit NAK or a receive
+	 * overrun - tx NAK means the device does not exist, rx OV
+	 * means the device must have responded to the slave address
+	 * even though the transfer failed
+	 */
+	if (flags == (I2CECB_TX_ERR|I2CECB_TX_NAK))
+		*(int *)data |= 1;
+	if (flags == (I2CECB_RX_ERR|I2CECB_RX_OV))
+		*(int *)data |= 2;
 }
 
-int i2c_probe(uchar chip)
+int
+i2c_probe(uchar chip)
 {
 	i2c_state_t state;
-	int rc;
+	int rc, err_flag;
 	uchar buf[1];
 
 	i2c_newio(&state);
 
-	state.err_cb = i2c_test_callback;
-	had_tx_nak = 0;
+	state.err_cb = i2c_probe_callback;
+	state.cb_data = (void *) &err_flag;
+	err_flag = 0;
 
 	rc = i2c_receive(&state, chip, 0, I2CF_START_COND|I2CF_STOP_COND, 1, buf);
 
 	if (rc != 0)
-		return (rc);
+		return (rc);	/* probe failed */
 
 	rc = i2c_doio(&state);
 
-	if ((rc != 0) && (rc != I2CERR_TIMEOUT))
-		return (rc);
+	if (rc == 0)
+		return (0);	/* device exists - read succeeded */
+
+	if (rc == I2CERR_TIMEOUT)
+		return (-1);	/* device does not exist - timeout */
+
+	if (rc != I2CERR_IO_ERROR || err_flag == 0)
+		return (rc);	/* probe failed */
+
+	if (err_flag & 1)
+		return (-1);	/* device does not exist - had transmit NAK */
 
-	return (had_tx_nak);
+	return (0);	/* device exists - had receive overrun */
 }
 
 
diff --git a/cpu/mpc8260/interrupts.c b/cpu/mpc8260/interrupts.c
index 9062084..3c5ef74 100644
--- a/cpu/mpc8260/interrupts.c
+++ b/cpu/mpc8260/interrupts.c
@@ -155,7 +155,7 @@ static __inline__ unsigned long get_msr (void)
 
 static __inline__ void set_msr (unsigned long msr)
 {
-	__asm__ __volatile__ ("mtmsr %0"::"r" (msr));
+	__asm__ __volatile__ ("mtmsr %0;sync;isync"::"r" (msr));
 }
 
 static __inline__ unsigned long get_dec (void)
@@ -208,6 +208,14 @@ int interrupt_init (void)
 	immr->im_intctl.ic_sipnrh = 0xffffffff;
 	immr->im_intctl.ic_sipnrl = 0xffffffff;
 
+#ifdef CONFIG_HYMOD
+	/*
+	 * ensure all external interrupt sources default to trigger on
+	 * high-to-low transition (i.e. edge triggered active low)
+	 */
+	immr->im_intctl.ic_siexr = -1;
+#endif
+
 	set_dec (decrementer_count);
 
 	set_msr (get_msr () | MSR_EE);
diff --git a/dtt/Makefile b/dtt/Makefile
index 48a4be6..6b9d499 100644
--- a/dtt/Makefile
+++ b/dtt/Makefile
@@ -27,7 +27,7 @@ include $(TOPDIR)/config.mk
 
 LIB	= libdtt.a
 
-OBJS	= lm75.o ds1621.o
+OBJS	= lm75.o ds1621.o adm1021.o
 
 all:	$(LIB)
 
diff --git a/dtt/adm1021.c b/dtt/adm1021.c
new file mode 100644
index 0000000..14c38f0
--- /dev/null
+++ b/dtt/adm1021.c
@@ -0,0 +1,171 @@
+/*
+ * (C) Copyright 2003
+ * Murray Jensen, CSIRO-MIT, Murray.Jensen@csiro.au
+ *
+ * based on dtt/lm75.c which is ...
+ *
+ * (C) Copyright 2001
+ * Bill Hunter,  Wave 7 Optics, williamhunter@mediaone.net
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Analog Devices's ADM1021
+ * "Low Cost Microprocessor System Temperature Monitor"
+ */
+
+#include <common.h>
+
+#ifdef CONFIG_DTT_ADM1021
+
+#include <i2c.h>
+#include <dtt.h>
+
+typedef
+	struct {
+		uint i2c_addr:7;	/* 7bit i2c chip address */
+		uint conv_rate:3;	/* conversion rate */
+		uint enable_alert:1;	/* enable alert output pin */
+		uint enable_local:1;	/* enable internal temp sensor */
+		uint max_local:8;	/* internal temp maximum */
+		uint min_local:8;	/* internal temp minimum */
+		uint enable_remote:1;	/* enable remote temp sensor */
+		uint max_remote:8;	/* remote temp maximum */
+		uint min_remote:8;	/* remote temp minimum */
+	}
+dtt_cfg_t;
+
+dtt_cfg_t dttcfg[] = CFG_DTT_ADM1021;
+
+int
+dtt_read (int sensor, int reg)
+{
+	dtt_cfg_t *dcp = &dttcfg[sensor >> 1];
+	uchar data;
+
+	if (i2c_read(dcp->i2c_addr, reg, 1, &data, 1) != 0)
+		return -1;
+
+	return (int)data;
+} /* dtt_read() */
+
+int
+dtt_write (int sensor, int reg, int val)
+{
+	dtt_cfg_t *dcp = &dttcfg[sensor >> 1];
+	uchar data;
+
+	data = (uchar)(val & 0xff);
+
+	if (i2c_write(dcp->i2c_addr, reg, 1, &data, 1) != 0)
+		return 1;
+
+	return 0;
+} /* dtt_write() */
+
+static int
+_dtt_init (int sensor)
+{
+	dtt_cfg_t *dcp = &dttcfg[sensor >> 1];
+	int reg, val;
+
+	if (((sensor & 1) == 0 ? dcp->enable_local : dcp->enable_remote) == 0)
+		return 1;	/* sensor is disabled (or rather ignored) */
+
+	/*
+	 * Setup High Limit register
+	 */
+	if ((sensor & 1) == 0) {
+		reg = DTT_WRITE_LOC_HIGHLIM;
+		val = dcp->max_local;
+	}
+	else {
+		reg = DTT_WRITE_REM_HIGHLIM;
+		val = dcp->max_remote;
+	}
+	if (dtt_write (sensor, reg, val) != 0)
+		return 1;
+
+	/*
+	 * Setup Low Limit register
+	 */
+	if ((sensor & 1) == 0) {
+		reg = DTT_WRITE_LOC_LOWLIM;
+		val = dcp->min_local;
+	}
+	else {
+		reg = DTT_WRITE_REM_LOWLIM;
+		val = dcp->min_remote;
+	}
+	if (dtt_write (sensor, reg, val) != 0)
+		return 1;
+
+	/* shouldn't hurt if the rest gets done twice */
+
+	/*
+	 * Setup Conversion Rate register
+	 */
+	if (dtt_write (sensor, DTT_WRITE_CONVRATE, dcp->conv_rate) != 0)
+		return 1;
+
+	/*
+	 * Setup configuraton register
+	 */
+	val = 0;				/* running */
+	if (dcp->enable_alert == 0)
+		val |= DTT_CONFIG_ALERT_MASKED;	/* mask ALERT pin */
+	if (dtt_write (sensor, DTT_WRITE_CONFIG, val) != 0)
+		return 1;
+
+	return 0;
+} /* _dtt_init() */
+
+int
+dtt_init (void)
+{
+	int i;
+	unsigned char sensors[] = CONFIG_DTT_SENSORS;
+	const char *const header = "DTT:   ";
+
+	for (i = 0; i < sizeof(sensors); i++) {
+	    if (_dtt_init(sensors[i]) != 0)
+		printf ("%s%d FAILED INIT\n", header, i+1);
+	    else
+		printf ("%s%d is %i C\n", header, i+1,
+		       dtt_get_temp(sensors[i]));
+	}
+
+	return (0);
+} /* dtt_init() */
+
+int
+dtt_get_temp (int sensor)
+{
+	signed char val;
+
+	if ((sensor & 1) == 0)
+		val = dtt_read(sensor, DTT_READ_LOC_VALUE);
+	else
+		val = dtt_read(sensor, DTT_READ_REM_VALUE);
+
+	return (int) val;
+} /* dtt_get_temp() */
+
+#endif /* CONFIG_DTT_ADM1021 */
diff --git a/include/cmd_bsp.h b/include/cmd_bsp.h
index 7966ad5..008008a 100644
--- a/include/cmd_bsp.h
+++ b/include/cmd_bsp.h
@@ -168,14 +168,20 @@ int do_pci9054 (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
 	"    address spaces appear in the physical address space\n"	\
 ), MK_CMD_TBL_ENTRY(							\
 	"eeclear", 4,	1,	0,	do_eecl,			\
-	"eeclear - Clear the eeprom on a Hymod board \n",		\
+	"eeclear - Clear the eeprom on a Hymod board\n",		\
 	"[type]\n"							\
 	"  - write zeroes into the EEPROM on the board of type `type'\n"\
 	"    (`type' is either `main' or `mezz' - default `main')\n"	\
 	"    Note: the EEPROM write enable jumper must be installed\n"	\
+), MK_CMD_TBL_ENTRY(							\
+	"htest", 5,	1,	0,	do_htest,			\
+	"htest   - run HYMOD tests\n",					\
+	NULL								\
 ),
+
 int do_fpga (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
 int do_eecl (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+int do_htest(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
 
 #endif	/* CONFIG_HYMOD */
 /* --------------------------------------------------------------------	*/
diff --git a/include/common.h b/include/common.h
index b0640c6..cc5dbe7 100644
--- a/include/common.h
+++ b/include/common.h
@@ -52,7 +52,7 @@ typedef volatile unsigned char	vu_char;
 #include <ppc4xx.h>
 #endif
 #ifdef CONFIG_HYMOD
-#include <asm/hymod.h>
+#include <board/hymod/hymod.h>
 #endif
 #ifdef CONFIG_ARM
 #define asmlinkage	/* nothing */
@@ -131,6 +131,7 @@ void	print_size (ulong, const char *);
 void	main_loop	(void);
 int	run_command	(const char *cmd, int flag);
 int	readline	(const char *const prompt);
+void	init_cmd_timeout(void);
 void	reset_cmd_timeout(void);
 
 /* common/board.c */
@@ -195,6 +196,9 @@ void    fdc_hw_init   (void);
 
 /* $(BOARD)/eeprom.c */
 void eeprom_init  (void);
+#ifndef CONFIG_SPI
+int  eeprom_probe (unsigned dev_addr, unsigned offset);
+#endif
 int  eeprom_read  (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt);
 int  eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt);
 #ifdef CONFIG_LWMON
@@ -437,6 +441,7 @@ int	tstc(void);
 void	putc(const char c);
 void	puts(const char *s);
 void	printf(const char *fmt, ...);
+void	vprintf(const char *fmt, va_list args);
 
 /* stderr */
 #define eputc(c)		fputc(stderr, c)
diff --git a/include/configs/hymod.h b/include/configs/hymod.h
index e3a0ee3..dc7de44 100644
--- a/include/configs/hymod.h
+++ b/include/configs/hymod.h
@@ -73,6 +73,9 @@
 #define	CONFIG_ETHER_ON_FCC		/* define if ether on FCC	*/
 #undef	CONFIG_ETHER_NONE		/* define if ether on something else */
 #define CONFIG_ETHER_INDEX	1	/* which channel for ether	*/
+#define CONFIG_ETHER_LOOPBACK_TEST	/* add ether external loopback test */
+
+#ifdef CONFIG_ETHER_ON_FCC
 
 #if (CONFIG_ETHER_INDEX == 1)
 
@@ -87,6 +90,10 @@
 # define CFG_CPMFCR_RAMTYPE	0
 # define CFG_FCC_PSMR		(FCC_PSMR_FDE|FCC_PSMR_LPB)
 
+# define MDIO_PORT		0		/* Port A */
+# define MDIO_DATA_PINMASK	0x00040000	/* Pin 13 */
+# define MDIO_CLCK_PINMASK	0x00080000	/* Pin 12 */
+
 #elif (CONFIG_ETHER_INDEX == 2)
 
 /*
@@ -100,6 +107,10 @@
 # define CFG_CPMFCR_RAMTYPE	0
 # define CFG_FCC_PSMR		(FCC_PSMR_FDE|FCC_PSMR_LPB)
 
+# define MDIO_PORT		0		/* Port A */
+# define MDIO_DATA_PINMASK	0x00000040	/* Pin 25 */
+# define MDIO_CLCK_PINMASK	0x00000080	/* Pin 24 */
+
 #elif (CONFIG_ETHER_INDEX == 3)
 
 /*
@@ -113,11 +124,33 @@
 # define CFG_CPMFCR_RAMTYPE	0
 # define CFG_FCC_PSMR		(FCC_PSMR_FDE|FCC_PSMR_LPB)
 
+# define MDIO_PORT		0		/* Port A */
+# define MDIO_DATA_PINMASK	0x00000100	/* Pin 23 */
+# define MDIO_CLCK_PINMASK	0x00000200	/* Pin 22 */
+
 #endif	/* CONFIG_ETHER_INDEX */
 
+#define CONFIG_MII			/* MII PHY management	*/
+#define CONFIG_BITBANGMII		/* bit-bang MII PHY management	*/
+
+#define MDIO_ACTIVE	(iop->pdir |=  MDIO_DATA_PINMASK)
+#define MDIO_TRISTATE	(iop->pdir &= ~MDIO_DATA_PINMASK)
+#define MDIO_READ	((iop->pdat &  MDIO_DATA_PINMASK) != 0)
+
+#define MDIO(bit)	if(bit) iop->pdat |=  MDIO_DATA_PINMASK; \
+			else	iop->pdat &= ~MDIO_DATA_PINMASK
+
+#define MDC(bit)	if(bit) iop->pdat |=  MDIO_CLCK_PINMASK; \
+			else	iop->pdat &= ~MDIO_CLCK_PINMASK
+
+#define MIIDELAY	udelay(1)
+
+#endif	/* CONFIG_ETHER_ON_FCC */
+
 
 /* other options */
 #define CONFIG_HARD_I2C		1	/* To enable I2C hardware support	*/
+#define CONFIG_DTT_ADM1021	1	/* ADM1021 temp sensor support */
 
 /* system clock rate (CLKIN) - equal to the 60x and local bus speed */
 #ifdef DEBUG
@@ -129,39 +162,52 @@
 #if defined(CONFIG_CONS_USE_EXTC)
 #define CONFIG_BAUDRATE		115200
 #else
-#define CONFIG_BAUDRATE		38400
+#define CONFIG_BAUDRATE		9600
 #endif
 
 /* default ip addresses - these will be overridden */
 #define CONFIG_IPADDR		192.168.1.1	/* hymod "boot" address */
 #define CONFIG_SERVERIP		192.168.1.254	/* hymod "server" address */
 
+#define CONFIG_LAST_STAGE_INIT
+
 #define CONFIG_COMMANDS		(CFG_CMD_ALL & ~( \
 					CFG_CMD_BEDBUG	| \
 					CFG_CMD_BMP	| \
 					CFG_CMD_DOC	| \
-					CFG_CMD_ELF	| \
 					CFG_CMD_FDC	| \
 					CFG_CMD_FDOS	| \
+					CFG_CMD_FPGA    | \
 					CFG_CMD_HWFLOW	| \
 					CFG_CMD_IDE	| \
 					CFG_CMD_JFFS2	| \
 					CFG_CMD_NAND	| \
-					CFG_CMD_MII	| \
 					CFG_CMD_MMC	| \
 					CFG_CMD_PCMCIA	| \
 					CFG_CMD_PCI	| \
 					CFG_CMD_USB	| \
 					CFG_CMD_SCSI	| \
 					CFG_CMD_SPI	| \
-					CFG_CMD_VFD	| \
-					CFG_CMD_DTT	) )
+					CFG_CMD_VFD	) )
 
 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
 #include <cmd_confdefs.h>
 
 #ifdef DEBUG
 #define CONFIG_BOOTDELAY	-1	/* autoboot disabled		*/
+#else
+#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
+#define CONFIG_BOOT_RETRY_TIME 30	/* retry autoboot after 30 secs	*/
+#define CONFIG_BOOT_RETRY_MIN	1	/* can go down to 1 second timeout */
+/* Be selective on what keys can delay or stop the autoboot process
+ *	To stop use: " "
+ */
+#define CONFIG_AUTOBOOT_KEYED
+#define CONFIG_AUTOBOOT_PROMPT		"Autobooting in %d seconds, " \
+					"press <SPACE> to stop\n"
+#define CONFIG_AUTOBOOT_STOP_STR	" "
+#undef CONFIG_AUTOBOOT_DELAY_STR
+#define DEBUG_BOOTKEYS		0
 #endif
 
 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
@@ -173,9 +219,9 @@
 #define	CONFIG_KGDB_EXTC_RATE	3686400	/* serial ext clk rate in Hz */
 #define	CONFIG_KGDB_EXTC_PINSEL	0	/* pin select 0=CLK3/CLK9,1=CLK5/CLK15*/
 # if defined(CONFIG_KGDB_USE_EXTC)
-#define CONFIG_KGDB_BAUDRATE	115200	/* speed to run kgdb serial port at */
+#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port at */
 # else
-#define CONFIG_KGDB_BAUDRATE	38400	/* speed to run kgdb serial port at */
+#define CONFIG_KGDB_BAUDRATE	9600	/* speed to run kgdb serial port at */
 # endif
 #endif
 
@@ -205,6 +251,8 @@
 #define CFG_MEMTEST_START	0x00400000	/* memtest works on	*/
 #define CFG_MEMTEST_END		0x03c00000	/* 4 ... 60 MB in DRAM	*/
 
+#define CFG_CLKS_IN_HZ		1	/* everything, incl board info, in Hz */
+
 #define	CFG_LOAD_ADDR		0x100000	/* default load address	*/
 
 #define	CFG_HZ		1000		/* decrementer freq: 1 ms ticks	*/
@@ -217,9 +265,48 @@
 /* these are for the ST M24C02 2kbit serial i2c eeprom */
 #define CFG_I2C_EEPROM_ADDR	0x50		/* base address */
 #define CFG_I2C_EEPROM_ADDR_LEN	1		/* bytes of address */
+/* mask of address bits that overflow into the "EEPROM chip address"    */
+#define CFG_I2C_EEPROM_ADDR_OVERFLOW	0x07
+
+#define CFG_EEPROM_PAGE_WRITE_ENABLE	1	/* write eeprom in pages */
+#define CFG_EEPROM_PAGE_WRITE_BITS	4	/* 16 byte write page size */
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10	/* and takes up to 10 msec */
+
+#define CFG_I2C_MULTI_EEPROMS	1		/* hymod has two eeproms */
+
 #define CFG_I2C_RTC_ADDR	0x51	/* philips PCF8563 RTC address */
 
 /*
+ * standard dtt sensor configuration - bottom bit will determine local or
+ * remote sensor of the ADM1021, the rest determines index into
+ * CFG_DTT_ADM1021 array below.
+ *
+ * On HYMOD board, the remote sensor should be connected to the MPC8260
+ * temperature diode thingy, but an errata said this didn't work and
+ * should be disabled - so it isn't connected.
+ */
+#if 0
+#define CONFIG_DTT_SENSORS		{ 0, 1 }
+#else
+#define CONFIG_DTT_SENSORS		{ 0 }
+#endif
+
+/*
+ * ADM1021 temp sensor configuration (see dtt/adm1021.c for details).
+ * there will be one entry in this array for each two (dummy) sensors in
+ * CONFIG_DTT_SENSORS.
+ *
+ * For HYMOD board:
+ * - only one ADM1021
+ * - i2c addr 0x2a (both ADD0 and ADD1 are N/C)
+ * - conversion rate 0x02 = 0.25 conversions/second
+ * - ALERT ouput disabled
+ * - local temp sensor enabled, min set to 0 deg, max set to 85 deg
+ * - remote temp sensor disabled (see comment for CONFIG_DTT_SENSORS above)
+ */
+#define CFG_DTT_ADM1021		{ { 0x2a, 0x02, 0, 1, 0, 85, 0, } }
+
+/*
  * Low Level Configuration Settings
  * (address mappings, register initial values, etc.)
  * You should know what you are doing if you make changes here.
@@ -296,10 +383,6 @@
 #define CFG_FLASH_ERASE_TOUT	120000	/* Flash Erase Timeout (in ms)	*/
 #define CFG_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)	*/
 
-#define CFG_FLASH_TYPE		FLASH_28F640J3A
-#define CFG_FLASH_ID		(INTEL_ID_28F640J3A & 0xff)
-#define CFG_FLASH_NBLOCKS	64
-
 #define	CFG_ENV_IS_IN_FLASH	1
 #define	CFG_ENV_SIZE		0x1000	/* Total Size of Environment Sector */
 #define CFG_ENV_SECT_SIZE	0x40000	/* see README - env sect real size */
@@ -610,6 +693,11 @@
 #define FPGA_MEZZ_ENABLE_PIN	3	/* PA3 */
 
 /*
+ * FPGA Interrupt configuration
+ */
+#define FPGA_MAIN_IRQ		SIU_INT_IRQ2
+
+/*
  * Internal Definitions
  *
  * Boot Flags
diff --git a/include/dtt.h b/include/dtt.h
index f3d95ff..a17aa67 100644
--- a/include/dtt.h
+++ b/include/dtt.h
@@ -27,9 +27,13 @@
 #ifndef _DTT_H_
 #define _DTT_H_
 
-#if defined(CONFIG_DTT_LM75) || defined(CONFIG_DTT_DS1621)
+#if defined(CONFIG_DTT_LM75) || \
+    defined(CONFIG_DTT_DS1621) || \
+    defined(CONFIG_DTT_ADM1021)
+
 #define CONFIG_DTT				/* We have a DTT */
 
+#ifndef CONFIG_DTT_ADM1021
 #define DTT_COMMERCIAL_MAX_TEMP	70		/* 0 - +70 C */
 #define DTT_INDUSTRIAL_MAX_TEMP	85		/* -40 - +85 C */
 #define DTT_AUTOMOTIVE_MAX_TEMP	105		/* -40 - +105 C */
@@ -39,6 +43,7 @@
 #ifndef CFG_DTT_HYSTERESIS
 #define CFG_DTT_HYSTERESIS	5		/* 5 C */
 #endif
+#endif /* CONFIG_DTT_ADM1021 */
 
 extern int dtt_init (void);
 extern int dtt_read(int sensor, int reg);
@@ -64,4 +69,37 @@ extern int dtt_get_temp(int sensor);
 #define DTT_CONFIG		0xAC
 #endif
 
+#if defined(CONFIG_DTT_ADM1021)
+#define DTT_READ_LOC_VALUE	0x00
+#define DTT_READ_REM_VALUE	0x01
+#define DTT_READ_STATUS		0x02
+#define DTT_READ_CONFIG		0x03
+#define DTT_READ_CONVRATE	0x04
+#define DTT_READ_LOC_HIGHLIM	0x05
+#define DTT_READ_LOC_LOWLIM	0x06
+#define DTT_READ_REM_HIGHLIM	0x07
+#define DTT_READ_REM_LOWLIM	0x08
+#define DTT_READ_DEVID		0xfe
+
+#define DTT_WRITE_CONFIG	0x09
+#define DTT_WRITE_CONVRATE	0x0a
+#define DTT_WRITE_LOC_HIGHLIM	0x0b
+#define DTT_WRITE_LOC_LOWLIM	0x0c
+#define DTT_WRITE_REM_HIGHLIM	0x0d
+#define DTT_WRITE_REM_LOWLIM	0x0e
+#define DTT_WRITE_ONESHOT	0x0f
+
+#define DTT_STATUS_BUSY		0x80	/* 1=ADC Converting */
+#define DTT_STATUS_LHIGH	0x40	/* 1=Local High Temp Limit Tripped */
+#define DTT_STATUS_LLOW		0x20	/* 1=Local Low Temp Limit Tripped */
+#define DTT_STATUS_RHIGH	0x10	/* 1=Remote High Temp Limit Tripped */
+#define DTT_STATUS_RLOW		0x08	/* 1=Remote Low Temp Limit Tripped */
+#define DTT_STATUS_OPEN		0x04	/* 1=Remote Sensor Open-Circuit */
+
+#define DTT_CONFIG_ALERT_MASKED	0x80	/* 0=ALERT Enabled, 1=ALERT Masked */
+#define DTT_CONFIG_STANDBY	0x40	/* 0=Run, 1=Standby */
+
+#define DTT_ADM1021_DEVID	0x41
+#endif
+
 #endif /* _DTT_H_ */
diff --git a/include/flash.h b/include/flash.h
index e594788..7223f59 100644
--- a/include/flash.h
+++ b/include/flash.h
@@ -204,10 +204,11 @@ extern int flash_real_protect(flash_info_t *info, long sector, int prot);
 #define INTEL_ID_28F640C3B  0x88CD88CD	/*  64M = 4M x 16 bottom boot sector	*/
 
 #define INTEL_ID_28F128J3   0x89189818	/*  16M = 8M x 16 x 128 */
-#define INTEL_ID_28F640J5   0x00150015	/*  64M = 128K x  64			*/
-#define INTEL_ID_28F320J3A  0x00160016	/*  32M = 128K x  32			*/
-#define INTEL_ID_28F640J3A  0x00170017	/*  64M = 128K x  64			*/
-#define INTEL_ID_28F128J3A  0x00180018	/* 128M = 128K x 128			*/
+#define INTEL_ID_28F320J5   0x00140014	/*  32M = 128K x  32	*/
+#define INTEL_ID_28F640J5   0x00150015	/*  64M = 128K x  64	*/
+#define INTEL_ID_28F320J3A  0x00160016	/*  32M = 128K x  32	*/
+#define INTEL_ID_28F640J3A  0x00170017	/*  64M = 128K x  64	*/
+#define INTEL_ID_28F128J3A  0x00180018	/* 128M = 128K x 128	*/
 
 #define INTEL_ID_28F160S3   0x00D000D0	/*  16M = 512K x  32 (64kB x 32)	*/
 #define INTEL_ID_28F320S3   0x00D400D4	/*  32M = 512K x  64 (64kB x 64)	*/
diff --git a/include/mpc8260_irq.h b/include/mpc8260_irq.h
index 046dd32..9bee9a3 100644
--- a/include/mpc8260_irq.h
+++ b/include/mpc8260_irq.h
@@ -28,6 +28,13 @@
 */
 #define	SIU_INT_SMC1		((uint)0x04)
 #define	SIU_INT_SMC2		((uint)0x05)
+#define	SIU_INT_IRQ1		((uint)0x13)
+#define	SIU_INT_IRQ2		((uint)0x14)
+#define	SIU_INT_IRQ3		((uint)0x15)
+#define	SIU_INT_IRQ4		((uint)0x16)
+#define	SIU_INT_IRQ5		((uint)0x17)
+#define	SIU_INT_IRQ6		((uint)0x18)
+#define	SIU_INT_IRQ7		((uint)0x19)
 #define	SIU_INT_FCC1		((uint)0x20)
 #define	SIU_INT_FCC2		((uint)0x21)
 #define	SIU_INT_FCC3		((uint)0x22)
diff --git a/lib_generic/vsprintf.c b/lib_generic/vsprintf.c
index d7a7661..b9e6e1b 100644
--- a/lib_generic/vsprintf.c
+++ b/lib_generic/vsprintf.c
@@ -329,7 +329,7 @@ void panic(const char *fmt, ...)
 {
 	va_list	args;
 	va_start(args, fmt);
-	printf(fmt);
+	vprintf(fmt, args);
 	putc('\n');
 	va_end(args);
 #if defined (CONFIG_PANIC_HANG)
diff --git a/lib_ppc/board.c b/lib_ppc/board.c
index 56cbdfe..9bc77b5 100644
--- a/lib_ppc/board.c
+++ b/lib_ppc/board.c
@@ -820,7 +820,6 @@ void board_init_r (gd_t *id, ulong dest_addr)
     defined(CONFIG_COGENT)	|| \
     defined(CONFIG_CPCI405)	|| \
     defined(CONFIG_EVB64260)	|| \
-    defined(CONFIG_HYMOD)	|| \
     defined(CONFIG_KUP4K)	|| \
     defined(CONFIG_LWMON)	|| \
     defined(CONFIG_PCU_E)	|| \
diff --git a/tools/bddb/brlog.php b/tools/bddb/brlog.php
index 6e98c9c..fa651ae 100644
--- a/tools/bddb/brlog.php
+++ b/tools/bddb/brlog.php
@@ -73,6 +73,7 @@
 <tr valign=top>
 <th>logno / edit</th>
 <th>date</th>
+<th>who</th>
 <th width="70%">details</th>
 </tr>
 <?php
@@ -82,6 +83,7 @@
 		echo "<tr>\n";
 		print_cell("<a href=\"edlog.php?serno=$row[serno]&logno=$row[logno]\">$row[logno]</a>");
 		print_cell($row['date']);
+		print_cell($row['who']);
 		print_cell("<pre>" . urldecode($row['details']) . "</pre>");
 		echo "</tr>\n";
 	}
diff --git a/tools/bddb/defs.php b/tools/bddb/defs.php
index 0393dbd..9361419 100644
--- a/tools/bddb/defs.php
+++ b/tools/bddb/defs.php
@@ -58,8 +58,8 @@
 	$zbt_nbits = array(0,19,20,21,22);
 
 	// Xilinx attributes
-	$xlxtyp_vals = array('','XCV300E','XCV400E','XCV600E');
-	$xlxspd_vals = array('','6','7','8');
+	$xlxtyp_vals = array('','XCV300E','XCV400E','XCV600E','XC2V2000','XC2V3000','XC2V4000','XC2V6000');
+	$xlxspd_vals = array('','6','7','8','4','5');
 	$xlxtmp_vals = array('','COM','IND');
 	$xlxgrd_vals = array('','NORMAL','ENGSAMP');
 
@@ -449,7 +449,13 @@
 	// generate a (possibly not unique) random vendor ethernet address
 	// (setting bit 6 in the ethernet address - motorola wise i.e. bit 0
 	// is the most significant bit - means it is not an assigned ethernet
-	// address). Also, make sure it is NOT a multicast ethernet address.
+	// address - it is a "locally administered" address). Also, make sure
+	// it is NOT a multicast ethernet address (by setting bit 7 to 0).
+	// e.g. the first byte of all ethernet addresses generated here will
+	// have 2 in the bottom two bits (incidentally, these are the first
+	// two bits transmitted on the wire, since the octets in ethernet
+	// addresses are transmitted LSB first).
+
 	function gen_eth_addr($serno) {
 
 		$ethaddr_high = (mt_rand(0, 65535) & 0xfeff) | 0x0200;
diff --git a/tools/bddb/doedlog.php b/tools/bddb/doedlog.php
index db27c37..f800471 100644
--- a/tools/bddb/doedlog.php
+++ b/tools/bddb/doedlog.php
@@ -26,6 +26,9 @@
 		$query.=" date='$date'";
 	}
 
+	if (isset($who))
+		$query.=", who='" . $who . "'";
+
 	if (isset($details))
 		$query.=", details='" . rawurlencode($details) . "'";
 
diff --git a/tools/bddb/donewlog.php b/tools/bddb/donewlog.php
index b00de95..35ba125 100644
--- a/tools/bddb/donewlog.php
+++ b/tools/bddb/donewlog.php
@@ -23,6 +23,9 @@
 		die("date is invalid (input '$date', yyyy-mm-dd '$y-$m-$d')");
 	$query.=", date='$date'";
 
+	if (isset($who))
+		$query.=", who='" . $who . "'";
+
 	if (isset($details))
 		$query.=", details='" . rawurlencode($details) . "'";
 
diff --git a/tools/bddb/edlog.php b/tools/bddb/edlog.php
index f819b46..7f311bf 100644
--- a/tools/bddb/edlog.php
+++ b/tools/bddb/edlog.php
@@ -41,6 +41,9 @@
 	// date date
 	print_field("date", $row);
 
+	// who char(20)
+	print_field("who", $row);
+
 	// details text
 	print_field_multiline("details", $row, 60, 10, 'text_filter');
 
diff --git a/tools/bddb/newlog.php b/tools/bddb/newlog.php
index 5ec42ac..3f51639 100644
--- a/tools/bddb/newlog.php
+++ b/tools/bddb/newlog.php
@@ -26,6 +26,9 @@
 	// date date
 	print_field("date", array('date' => date("Y-m-d")));
 
+	// who char(20)
+	print_field("who", "");
+
 	// details text
 	print_field_multiline("details", array(), 60, 10, 'text_filter');
 
diff --git a/tools/gdb/astest.c b/tools/gdb/astest.c
index dbe55fe..a791469 100644
--- a/tools/gdb/astest.c
+++ b/tools/gdb/astest.c
@@ -1,3 +1,26 @@
+/*
+ * (C) Copyright 2000
+ * Murray Jensen <Murray.Jensen@csiro.au>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
 #include <stdio.h>
 #include <stdlib.h>
 #include <string.h>
diff --git a/tools/gdb/error.c b/tools/gdb/error.c
index aea2901..276a00a 100644
--- a/tools/gdb/error.c
+++ b/tools/gdb/error.c
@@ -1,3 +1,26 @@
+/*
+ * (C) Copyright 2000
+ * Murray Jensen <Murray.Jensen@csiro.au>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
 #include <stdio.h>
 #include <stdlib.h>
 #include <string.h>
diff --git a/tools/gdb/error.h b/tools/gdb/error.h
index 907709f..0698213 100644
--- a/tools/gdb/error.h
+++ b/tools/gdb/error.h
@@ -1,3 +1,26 @@
+/*
+ * (C) Copyright 2000
+ * Murray Jensen <Murray.Jensen@csiro.au>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
 #include <stdarg.h>
 
 extern char *pname;
diff --git a/tools/gdb/gdbcont.c b/tools/gdb/gdbcont.c
index ee9553c..300545d 100644
--- a/tools/gdb/gdbcont.c
+++ b/tools/gdb/gdbcont.c
@@ -1,3 +1,26 @@
+/*
+ * (C) Copyright 2000
+ * Murray Jensen <Murray.Jensen@csiro.au>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
 #include <stdio.h>
 #include <stdlib.h>
 #include <string.h>
diff --git a/tools/gdb/gdbsend.c b/tools/gdb/gdbsend.c
index d46ab48..8cd8347 100644
--- a/tools/gdb/gdbsend.c
+++ b/tools/gdb/gdbsend.c
@@ -1,3 +1,26 @@
+/*
+ * (C) Copyright 2000
+ * Murray Jensen <Murray.Jensen@csiro.au>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
 #include <stdio.h>
 #include <stdlib.h>
 #include <string.h>
diff --git a/tools/gdb/remote.h b/tools/gdb/remote.h
index bfc4a1f..f14dacb 100644
--- a/tools/gdb/remote.h
+++ b/tools/gdb/remote.h
@@ -1,3 +1,26 @@
+/*
+ * (C) Copyright 2000
+ * Murray Jensen <Murray.Jensen@csiro.au>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
 extern int remote_desc, remote_timeout;
 
 extern void remote_reset(void);
diff --git a/tools/gdb/serial.c b/tools/gdb/serial.c
index 88895bb..2f2e529 100644
--- a/tools/gdb/serial.c
+++ b/tools/gdb/serial.c
@@ -1,3 +1,26 @@
+/*
+ * (C) Copyright 2000
+ * Murray Jensen <Murray.Jensen@csiro.au>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
 #include <unistd.h>
 #include <string.h>
 #include <fcntl.h>
diff --git a/tools/gdb/serial.h b/tools/gdb/serial.h
index 60629bd..3ed509e 100644
--- a/tools/gdb/serial.h
+++ b/tools/gdb/serial.h
@@ -1,3 +1,26 @@
+/*
+ * (C) Copyright 2000
+ * Murray Jensen <Murray.Jensen@csiro.au>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
 #include <termios.h>
 
 #define SERIAL_ERROR	-1	/* General error, see errno for details */