ColdFire: MCF547x_8x - Add M5475EVB and M5485EVB support

Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
Signed-off by: John Rigby <jrigby@freescale.com>

8 files changed, 963 insertions, 1 deletions

diff --git a/CREDITS b/CREDITS
index edf825c..57a82d2 100644
--- a/CREDITS
+++ b/CREDITS
@@ -290,7 +290,7 @@ W: http://www.leox.org
 
 N: TsiChung Liew
 E: Tsi-Chung.Liew@freescale.com
-D: Support for ColdFire MCF523x, MCF532x, MCF5445x
+D: Support for ColdFire MCF523x, MCF532x, MCF5445x, MCF547x_8x
 W: www.freescale.com
 
 N: Leif Lindholm
diff --git a/MAINTAINERS b/MAINTAINERS
index 3d35b3e..bd30f09 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -652,6 +652,8 @@ TsiChung Liew <Tsi-Chung.Liew@freescale.com>
 	M5329EVB		mcf532x
 	M5373EVB		mcf532x
 	M54455EVB		mcf5445x
+	M5475EVB		mcf547x_8x
+	M5485EVB		mcf547x_8x
 
 Hayden Fraser <Hayden.Fraser@freescale.com>
 
diff --git a/MAKEALL b/MAKEALL
index 744fd9b..5f1be83 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -653,6 +653,8 @@ LIST_coldfire="			\
 	M5329AFEE		\
 	M5373EVB		\
 	M54455EVB		\
+	M5475AFE		\
+	M5485AFE		\
 	r5200			\
 	TASREG			\
 "
diff --git a/Makefile b/Makefile
index a672f3a..953c6bb 100644
--- a/Makefile
+++ b/Makefile
@@ -218,6 +218,7 @@ LIBS += net/libnet.a
 LIBS += disk/libdisk.a
 LIBS += drivers/bios_emulator/libatibiosemu.a
 LIBS += drivers/block/libblock.a
+LIBS += drivers/dma/libdma.a
 LIBS += drivers/hwmon/libhwmon.a
 LIBS += drivers/i2c/libi2c.a
 LIBS += drivers/input/libinput.a
@@ -1856,6 +1857,76 @@ M54455EVB_i66_config :	unconfig
 	$(XECHO) "... with $${FREQ}Hz input clock"
 	@$(MKCONFIG) -a M54455EVB m68k mcf5445x m54455evb freescale
 
+M5475AFE_config \
+M5475BFE_config \
+M5475CFE_config \
+M5475DFE_config \
+M5475EFE_config \
+M5475FFE_config \
+M5475GFE_config :	unconfig
+	@case "$@" in \
+	M5475AFE_config)	BOOT=2;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \
+	M5475BFE_config)	BOOT=2;CODE=16;VID=0;USB=0;RAM=64;RAM1=0;; \
+	M5475CFE_config)	BOOT=2;CODE=16;VID=1;USB=1;RAM=64;RAM1=0;; \
+	M5475DFE_config)	BOOT=2;CODE=0;VID=0;USB=1;RAM=64;RAM1=0;; \
+	M5475EFE_config)	BOOT=2;CODE=0;VID=1;USB=1;RAM=64;RAM1=0;; \
+	M5475FFE_config)	BOOT=2;CODE=32;VID=1;USB=1;RAM=64;RAM1=64;; \
+	M5475GFE_config)	BOOT=4;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \
+	esac; \
+	>include/config.h ; \
+	echo "#define CFG_BUSCLK	133333333" > $(obj)include/config.h ; \
+	echo "#define CFG_BOOTSZ	$${BOOT}" >> $(obj)include/config.h ; \
+	echo "#define CFG_DRAMSZ	$${RAM}" >> $(obj)include/config.h ; \
+	if [ "$${RAM1}" != "0" ] ; then \
+		echo "#define CFG_DRAMSZ1	$${RAM1}" >> $(obj)include/config.h ; \
+	fi; \
+	if [ "$${CODE}" != "0" ] ; then \
+		echo "#define CFG_NOR1SZ	$${CODE}" >> $(obj)include/config.h ; \
+	fi; \
+	if [ "$${VID}" == "1" ] ; then \
+		echo "#define CFG_VIDEO" >> $(obj)include/config.h ; \
+	fi; \
+	if [ "$${USB}" == "1" ] ; then \
+		echo "#define CFG_USBCTRL" >> $(obj)include/config.h ; \
+	fi
+	@$(MKCONFIG) -a M5475EVB m68k mcf547x_8x m547xevb freescale
+
+M5485AFE_config \
+M5485BFE_config \
+M5485CFE_config \
+M5485DFE_config \
+M5485EFE_config \
+M5485FFE_config \
+M5485GFE_config \
+M5485HFE_config :	unconfig
+	@case "$@" in \
+	M5485AFE_config)	BOOT=2;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \
+	M5485BFE_config)	BOOT=2;CODE=16;VID=0;USB=0;RAM=64;RAM1=0;; \
+	M5485CFE_config)	BOOT=2;CODE=16;VID=1;USB=1;RAM=64;RAM1=0;; \
+	M5485DFE_config)	BOOT=2;CODE=0;VID=0;USB=1;RAM=64;RAM1=0;; \
+	M5485EFE_config)	BOOT=2;CODE=0;VID=1;USB=1;RAM=64;RAM1=0;; \
+	M5485FFE_config)	BOOT=2;CODE=32;VID=1;USB=1;RAM=64;RAM1=64;; \
+	M5485GFE_config)	BOOT=4;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \
+	M5485HFE_config)	BOOT=2;CODE=;VID=1;USB=0;RAM=64;RAM1=0;; \
+	esac; \
+	>include/config.h ; \
+	echo "#define CFG_BUSCLK	100000000" > $(obj)include/config.h ; \
+	echo "#define CFG_BOOTSZ	$${BOOT}" >> $(obj)include/config.h ; \
+	echo "#define CFG_DRAMSZ	$${RAM}" >> $(obj)include/config.h ; \
+	if [ "$${RAM1}" != "0" ] ; then \
+		echo "#define CFG_DRAMSZ1	$${RAM1}" >> $(obj)include/config.h ; \
+	fi; \
+	if [ "$${CODE}" != "0" ] ; then \
+		echo "#define CFG_NOR1SZ	$${CODE}" >> $(obj)include/config.h ; \
+	fi; \
+	if [ "$${VID}" == "1" ] ; then \
+		echo "#define CFG_VIDEO" >> $(obj)include/config.h ; \
+	fi; \
+	if [ "$${USB}" == "1" ] ; then \
+		echo "#define CFG_USBCTRL" >> $(obj)include/config.h ; \
+	fi
+	@$(MKCONFIG) -a M5485EVB m68k mcf547x_8x m548xevb freescale
+
 #########################################################################
 ## MPC83xx Systems
 #########################################################################
diff --git a/README b/README
index 09dda53..fc40420 100644
--- a/README
+++ b/README
@@ -139,6 +139,7 @@ Directory Hierarchy:
   - mcf5227x	Files specific to Freescale ColdFire MCF5227x CPUs
   - mcf532x	Files specific to Freescale ColdFire MCF5329 CPUs
   - mcf5445x	Files specific to Freescale ColdFire MCF5445x CPUs
+  - mcf547x_8x	Files specific to Freescale ColdFire MCF547x_8x CPUs
   - mips	Files specific to MIPS CPUs
   - mpc5xx	Files specific to Freescale MPC5xx  CPUs
   - mpc5xxx	Files specific to Freescale MPC5xxx CPUs
diff --git a/doc/README.m5475evb b/doc/README.m5475evb
new file mode 100644
index 0000000..cec4fd0
--- /dev/null
+++ b/doc/README.m5475evb
@@ -0,0 +1,279 @@
+Freescale MCF5475EVB ColdFire Development Board
+================================================
+
+TsiChung Liew(Tsi-Chung.Liew@freescale.com)
+Created Jan 08, 2008
+===========================================
+
+
+Changed files:
+==============
+
+- board/freescale/m547xevb/m547xevb.c	Dram setup, IDE pre init, and PCI init
+- board/freescale/m547xevb/mii.c	MII init
+- board/freescale/m547xevb/Makefile	Makefile
+- board/freescale/m547xevb/config.mk	config make
+- board/freescale/m547xevb/u-boot.lds	Linker description
+
+- cpu/mcf547x_8x/cpu.c			cpu specific code
+- cpu/mcf547x_8x/cpu_init.c		Flexbus ChipSelect, Mux pins setup, icache and RTC extra regs
+- cpu/mcf547x_8x/interrupts.c		cpu specific interrupt support
+- cpu/mcf547x_8x/slicetimer.c		Timer support
+- cpu/mcf547x_8x/speed.c		system, pci, flexbus, and cpu clock
+- cpu/mcf547x_8x/Makefile		Makefile
+- cpu/mcf547x_8x/config.mk		config make
+- cpu/mcf547x_8x/start.S		start up assembly code
+
+- doc/README.m5475evb			This readme file
+
+- drivers/dma/MCD_dmaApi.c		DMA API functions
+- drivers/dma/MCD_tasks.c		DMA Tasks
+- drivers/dma/MCD_tasksInit.c		DMA Tasks Init
+- drivers/net/fsl_mcdmafec.c		ColdFire common DMA FEC driver
+- drivers/serial/mcfuart.c		ColdFire common UART driver
+
+- include/MCD_dma.h			DMA header file
+- include/MCD_progCheck.h		DMA header file
+- include/MCD_tasksInit.h		DMA header file
+- include/asm-m68k/bitops.h		Bit operation function export
+- include/asm-m68k/byteorder.h		Byte order functions
+- include/asm-m68k/errno.h		Error Number definition
+- include/asm-m68k/fec.h		FEC structure and definition
+- include/asm-m68k/fsl_i2c.h		I2C structure and definition
+- include/asm-m68k/fsl_mcddmafec.h	DMA FEC structure and definition
+- include/asm-m68k/global_data.h	Global data structure
+- include/asm-m68k/immap.h		ColdFire specific header file and driver macros
+- include/asm-m68k/immap_547x_8x.h	mcf547x_8x specific header file
+- include/asm-m68k/io.h			io functions
+- include/asm-m68k/m547x_8x.h		mcf547x_8x specific header file
+- include/asm-m68k/posix_types.h	Posix
+- include/asm-m68k/processor.h		header file
+- include/asm-m68k/ptrace.h		Exception structure
+- include/asm-m68k/rtc.h		Realtime clock header file
+- include/asm-m68k/string.h		String function export
+- include/asm-m68k/timer.h		Timer structure and definition
+- include/asm-m68k/types.h		Data types definition
+- include/asm-m68k/uart.h		Uart structure and definition
+- include/asm-m68k/u-boot.h		u-boot structure
+
+- include/configs/M5475EVB.h		Board specific configuration file
+
+- lib_m68k/board.c			board init function
+- lib_m68k/cache.c
+- lib_m68k/interrupts			Coldfire common interrupt functions
+- lib_m68k/m68k_linux.c
+- lib_m68k/traps.c			Exception init code
+
+1 MCF547x specific Options/Settings
+====================================
+1.1 pre-loader is no longer suppoer in thie coldfire family
+
+1.2 Configuration settings for M5475EVB Development Board
+CONFIG_MCF547x_8x	-- define for all MCF547x_8x CPUs
+CONFIG_M547x		-- define for all Freescale MCF547x CPUs
+CONFIG_M5475		-- define for M5475EVB board
+
+CONFIG_MCFUART		-- define to use common CF Uart driver
+CFG_UART_PORT		-- define UART port number, start with 0, 1 and 2
+CONFIG_BAUDRATE		-- define UART baudrate
+
+CONFIG_FSLDMAFEC	-- define to use common dma FEC driver
+CONFIG_NET_MULTI	-- define to use multi FEC in u-boot
+CONFIG_MII		-- enable to use MII driver
+CONFIG_CF_DOMII		-- enable to use MII feature in cmd_mii.c
+CFG_DISCOVER_PHY	-- enable PHY discovery
+CFG_RX_ETH_BUFFER	-- Set FEC Receive buffer
+CFG_FAULT_ECHO_LINK_DOWN--
+CFG_FEC0_PINMUX		-- Set FEC0 Pin configuration
+CFG_FEC1_PINMUX		-- Set FEC1 Pin configuration
+CFG_FEC0_MIIBASE	-- Set FEC0 MII base register
+CFG_FEC1_MIIBASE	-- Set FEC0 MII base register
+MCFFEC_TOUT_LOOP	-- set FEC timeout loop
+CONFIG_HAS_ETH1		-- define to enable second FEC in u-boot
+
+CONFIG_CMD_USB		-- enable USB commands
+CONFIG_USB_OHCI_NEW	-- enable USB OHCI driver
+CONFIG_USB_STORAGE	-- enable USB Storage device
+CONFIG_DOS_PARTITION	-- enable DOS read/write
+
+CONFIG_SLTTMR		-- define to use SLT timer
+
+CONFIG_FSL_I2C		-- define to use FSL common I2C driver
+CONFIG_HARD_I2C		-- define for I2C hardware support
+CONFIG_SOFT_I2C		-- define for I2C bit-banged
+CFG_I2C_SPEED		-- define for I2C speed
+CFG_I2C_SLAVE		-- define for I2C slave address
+CFG_I2C_OFFSET		-- define for I2C base address offset
+CFG_IMMR		-- define for MBAR offset
+
+CONFIG_PCI              -- define for PCI support
+CONFIG_PCI_PNP          -- define for Plug n play support
+CONFIG_SKIPPCI_HOSTBRIDGE	-- SKIP PCI Host bridge
+CFG_PCI_MEM_BUS		-- PCI memory logical offset
+CFG_PCI_MEM_PHYS	-- PCI memory physical offset
+CFG_PCI_MEM_SIZE	-- PCI memory size
+CFG_PCI_IO_BUS		-- PCI IO logical offset
+CFG_PCI_IO_PHYS		-- PCI IO physical offset
+CFG_PCI_IO_SIZE		-- PCI IO size
+CFG_PCI_CFG_BUS		-- PCI Configuration logical offset
+CFG_PCI_CFG_PHYS	-- PCI Configuration physical offset
+CFG_PCI_CFG_SIZE	-- PCI Configuration size
+
+CFG_MBAR		-- define MBAR offset
+
+CONFIG_MONITOR_IS_IN_RAM -- Not support
+
+CFG_INIT_RAM_ADDR	-- defines the base address of the MCF547x internal SRAM
+
+CFG_CSn_BASE	-- defines the Chip Select Base register
+CFG_CSn_MASK	-- defines the Chip Select Mask register
+CFG_CSn_CTRL	-- defines the Chip Select Control register
+
+CFG_SDRAM_BASE	-- defines the DRAM Base
+
+2. MEMORY MAP UNDER U-BOOT AND LINUX KERNEL
+===========================================
+2.1. System memory map:
+	Flash:		0xFF800000-0xFFFFFFFF (8MB)
+	DDR:		0x00000000-0x3FFFFFFF (1024MB)
+	SRAM:		0xF2000000-0xF2000FFF (4KB)
+	PCI:		0x70000000-0x8FFFFFFF (512MB)
+	IP:		0xF0000000-0xFFFFFFFF (256MB)
+
+3. COMPILATION
+==============
+3.1	To create U-Boot the gcc-4.x compiler set (ColdFire ELF or uclinux
+        version) from codesourcery.com was used. Download it from:
+	http://www.codesourcery.com/gnu_toolchains/coldfire/download.html
+
+3.2 Compilation
+   export CROSS_COMPILE=cross-compile-prefix
+   cd u-boot-1.x.x
+   make distclean
+   make M5475AFE_config, or	- boot 2MB, RAM 64MB
+   make M5475BFE_config, or	- boot 2MB, code 16MB, RAM 64MB
+   make M5475CFE_config, or	- boot 2MB, code 16MB, Video, USB, RAM 64MB
+   make M5475DFE_config, or	- boot 2MB, USB, RAM 64MB
+   make M5475EFE_config, or	- boot 2MB, Video, USB, RAM 64MB
+   make M5475FFE_config, or	- boot 2MB, code 32MB, Video, USB, RAM 128MB
+   make M5475GFE_config, or	- boot 2MB, RAM 64MB
+   make
+
+5. SCREEN DUMP
+==============
+5.1
+
+U-Boot 1.3.1 (Jan  8 2008 - 12:47:44)
+
+CPU:   Freescale MCF5475
+       CPU CLK 266 Mhz BUS CLK 133 Mhz
+Board: Freescale FireEngine 5475 EVB
+I2C:   ready
+DRAM:  64 MB
+FLASH: 18 MB
+In:    serial
+Out:   serial
+Err:   serial
+Net:   FEC0, FEC1
+-> pri
+bootdelay=1
+baudrate=115200
+ethaddr=00:e0:0c:bc:e5:60
+eth1addr=00:e0:0c:bc:e5:61
+ipaddr=192.162.1.2
+serverip=192.162.1.1
+gatewayip=192.162.1.1
+netmask=255.255.255.0
+hostname=M547xEVB
+netdev=eth0
+loadaddr=10000
+u-boot=u-boot.bin
+load=tftp ${loadaddr) ${u-boot}
+upd=run load; run prog
+prog=prot off bank 1;era ff800000 ff82ffff;cp.b ${loadaddr} ff800000 ${filesize};save
+stdin=serial
+stdout=serial
+stderr=serial
+ethact=FEC0
+mem=65024k
+
+Environment size: 433/8188 bytes
+-> bdin
+memstart    = 0x00000000
+memsize     = 0x04000000
+flashstart  = 0xFF800000
+flashsize   = 0x01200000
+flashoffset = 0x00000000
+sramstart   = 0xF2000000
+sramsize    = 0x00001000
+mbar        = 0xF0000000
+busfreq     = 133.333 MHz
+pcifreq     =      0 MHz
+ethaddr     = 00:E0:0C:BC:E5:60
+eth1addr    = 00:E0:0C:BC:E5:61
+ip_addr     = 192.162.1.2
+baudrate    = 115200 bps
+-> ?
+?       - alias for 'help'
+autoscr - run script from memory
+base    - print or set address offset
+bdinfo  - print Board Info structure
+boot    - boot default, i.e., run 'bootcmd'
+bootd   - boot default, i.e., run 'bootcmd'
+bootelf - Boot from an ELF image in memory
+bootm   - boot application image from memory
+bootp	- boot image via network using BootP/TFTP protocol
+bootvx  - Boot vxWorks from an ELF image
+cmp     - memory compare
+coninfo - print console devices and information
+cp      - memory copy
+crc32   - checksum calculation
+dcache  - enable or disable data cache
+echo    - echo args to console
+erase   - erase FLASH memory
+flinfo  - print FLASH memory information
+go      - start application at address 'addr'
+help    - print online help
+icache  - enable or disable instruction cache
+icrc32  - checksum calculation
+iloop   - infinite loop on address range
+imd     - i2c memory display
+iminfo  - print header information for application image
+imls    - list all images found in flash
+imm     - i2c memory modify (auto-incrementing)
+imw     - memory write (fill)
+inm     - memory modify (constant address)
+iprobe  - probe to discover valid I2C chip addresses
+itest	- return true/false on integer compare
+loadb   - load binary file over serial line (kermit mode)
+loads   - load S-Record file over serial line
+loady   - load binary file over serial line (ymodem mode)
+loop    - infinite loop on address range
+md      - memory display
+mii     - MII utility commands
+mm      - memory modify (auto-incrementing)
+mtest   - simple RAM test
+mw      - memory write (fill)
+nfs	- boot image via network using NFS protocol
+nm      - memory modify (constant address)
+pci     - list and access PCI Configuration Space
+ping	- send ICMP ECHO_REQUEST to network host
+printenv- print environment variables
+protect - enable or disable FLASH write protection
+rarpboot- boot image via network using RARP/TFTP protocol
+reset   - Perform RESET of the CPU
+run     - run commands in an environment variable
+saveenv - save environment variables to persistent storage
+setenv  - set environment variables
+sleep   - delay execution for some time
+tftpboot- boot image via network using TFTP protocol
+usb     - USB sub-system
+usbboot - boot from USB device
+version - print monitor version
+-> usb start
+(Re)start USB...
+USB:   OHCI pci controller (1131, 1561) found @(0:17:0)
+OHCI regs address 0x80000000
+scanning bus for devices... 2 USB Device(s) found
+       scanning bus for storage devices... 1 Storage Device(s) found
+->
diff --git a/include/configs/M5475EVB.h b/include/configs/M5475EVB.h
new file mode 100644
index 0000000..84c2105
--- /dev/null
+++ b/include/configs/M5475EVB.h
@@ -0,0 +1,311 @@
+/*
+ * Configuation settings for the Freescale MCF5475 board.
+ *
+ * Copyright (C) 2004-2008 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * board/config.h - configuration options, board specific
+ */
+
+#ifndef _M5475EVB_H
+#define _M5475EVB_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+#define CONFIG_MCF547x_8x	/* define processor family */
+#define CONFIG_M547x		/* define processor type */
+#define CONFIG_M5475		/* define processor type */
+
+#undef DEBUG
+
+#define CONFIG_MCFUART
+#define CFG_UART_PORT		(0)
+#define CONFIG_BAUDRATE		115200
+#define CFG_BAUDRATE_TABLE	{ 9600 , 19200 , 38400 , 57600, 115200 }
+
+#define CONFIG_HW_WATCHDOG
+#define CONFIG_WATCHDOG_TIMEOUT	5000	/* timeout in milliseconds, max timeout is 6.71sec */
+
+/* Command line configuration */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_CACHE
+#undef CONFIG_CMD_DATE
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_MISC
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_USB
+
+#define CONFIG_SLTTMR
+
+#define CONFIG_FSLDMAFEC
+#ifdef CONFIG_FSLDMAFEC
+#	define CONFIG_NET_MULTI		1
+#	define CONFIG_MII		1
+#	define CONFIG_HAS_ETH1
+
+#	define CFG_DISCOVER_PHY
+#	define CFG_RX_ETH_BUFFER	32
+#	define CFG_TX_ETH_BUFFER	48
+#	define CFG_FAULT_ECHO_LINK_DOWN
+
+#	define CFG_FEC0_PINMUX		0
+#	define CFG_FEC0_MIIBASE		CFG_FEC0_IOBASE
+#	define CFG_FEC1_PINMUX		0
+#	define CFG_FEC1_MIIBASE		CFG_FEC0_IOBASE
+
+#	define MCFFEC_TOUT_LOOP 	50000
+/* If CFG_DISCOVER_PHY is not defined - hardcoded */
+#	ifndef CFG_DISCOVER_PHY
+#		define FECDUPLEX	FULL
+#		define FECSPEED		_100BASET
+#	else
+#		ifndef CFG_FAULT_ECHO_LINK_DOWN
+#			define CFG_FAULT_ECHO_LINK_DOWN
+#		endif
+#	endif			/* CFG_DISCOVER_PHY */
+
+#	define CONFIG_ETHADDR	00:e0:0c:bc:e5:60
+#	define CONFIG_ETH1ADDR	00:e0:0c:bc:e5:61
+#	define CONFIG_IPADDR	192.162.1.2
+#	define CONFIG_NETMASK	255.255.255.0
+#	define CONFIG_SERVERIP	192.162.1.1
+#	define CONFIG_GATEWAYIP	192.162.1.1
+#	define CONFIG_OVERWRITE_ETHADDR_ONCE
+
+#endif
+
+#ifdef CONFIG_CMD_USB
+#	define CONFIG_USB_OHCI_NEW
+#	define CONFIG_USB_STORAGE
+
+#	ifndef CONFIG_CMD_PCI
+#		define CONFIG_CMD_PCI
+#	endif
+#	define CONFIG_PCI_OHCI
+#	define CONFIG_DOS_PARTITION
+
+#	undef CFG_USB_OHCI_BOARD_INIT
+#	undef CFG_USB_OHCI_CPU_INIT
+#	define CFG_USB_OHCI_MAX_ROOT_PORTS	15
+#	define CFG_USB_OHCI_SLOT_NAME		"isp1561"
+#	define CFG_OHCI_SWAP_REG_ACCESS
+#endif
+
+/* I2C */
+#define CONFIG_FSL_I2C
+#define CONFIG_HARD_I2C		/* I2C with hw support */
+#undef CONFIG_SOFT_I2C		/* I2C bit-banged */
+#define CFG_I2C_SPEED		80000
+#define CFG_I2C_SLAVE		0x7F
+#define CFG_I2C_OFFSET		0x00008F00
+#define CFG_IMMR		CFG_MBAR
+
+/* PCI */
+#ifdef CONFIG_CMD_PCI
+#define CONFIG_PCI		1
+#define CONFIG_PCI_PNP		1
+#define CONFIG_SKIPPCI_HOSTBRIDGE
+
+#define CFG_PCI_CACHE_LINE_SIZE	8
+
+#define CFG_PCI_MEM_BUS		0x80000000
+#define CFG_PCI_MEM_PHYS	CFG_PCI_MEM_BUS
+#define CFG_PCI_MEM_SIZE	0x10000000
+
+#define CFG_PCI_IO_BUS		0x71000000
+#define CFG_PCI_IO_PHYS		CFG_PCI_IO_BUS
+#define CFG_PCI_IO_SIZE		0x01000000
+
+#define CFG_PCI_CFG_BUS		0x70000000
+#define CFG_PCI_CFG_PHYS	CFG_PCI_CFG_BUS
+#define CFG_PCI_CFG_SIZE	0x01000000
+#endif
+
+#define CONFIG_BOOTDELAY	1	/* autoboot after 5 seconds */
+#define CONFIG_UDP_CHECKSUM
+
+#ifdef CONFIG_MCFFEC
+#	define CONFIG_ETHADDR	00:e0:0c:bc:e5:60
+#	define CONFIG_IPADDR	192.162.1.2
+#	define CONFIG_NETMASK	255.255.255.0
+#	define CONFIG_SERVERIP	192.162.1.1
+#	define CONFIG_GATEWAYIP	192.162.1.1
+#	define CONFIG_OVERWRITE_ETHADDR_ONCE
+#endif				/* FEC_ENET */
+
+#define CONFIG_HOSTNAME		M547xEVB
+#define CONFIG_EXTRA_ENV_SETTINGS		\
+	"netdev=eth0\0"				\
+	"loadaddr=10000\0"			\
+	"u-boot=u-boot.bin\0"			\
+	"load=tftp ${loadaddr) ${u-boot}\0"	\
+	"upd=run load; run prog\0"		\
+	"prog=prot off bank 1;"			\
+	"era ff800000 ff82ffff;"		\
+	"cp.b ${loadaddr} ff800000 ${filesize};"\
+	"save\0"				\
+	""
+
+#define CONFIG_PRAM		512	/* 512 KB */
+#define CFG_PROMPT		"-> "
+#define CFG_LONGHELP		/* undef to save memory */
+
+#ifdef CONFIG_CMD_KGDB
+#	define CFG_CBSIZE	1024	/* Console I/O Buffer Size */
+#else
+#	define CFG_CBSIZE	256	/* Console I/O Buffer Size */
+#endif
+
+#define CFG_PBSIZE		(CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size */
+#define CFG_MAXARGS		16	/* max number of command args */
+#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size    */
+#define CFG_LOAD_ADDR		0x00010000
+
+#define CFG_HZ			1000
+#define CFG_CLK			CFG_BUSCLK
+#define CFG_CPU_CLK		CFG_CLK * 2
+
+#define CFG_MBAR		0xF0000000
+#define CFG_INTSRAM		(CFG_MBAR + 0x10000)
+#define CFG_INTSRAMSZ		0x8000
+
+/*#define CFG_LATCH_ADDR		(CFG_CS1_BASE + 0x80000)*/
+
+/*
+ * Low Level Configuration Settings
+ * (address mappings, register initial values, etc.)
+ * You should know what you are doing if you make changes here.
+ */
+/*-----------------------------------------------------------------------
+ * Definitions for initial stack pointer and data area (in DPRAM)
+ */
+#define CFG_INIT_RAM_ADDR	0xF2000000
+#define CFG_INIT_RAM_END	0x1000	/* End of used area in internal SRAM */
+#define CFG_INIT_RAM_CTRL	0x21
+#define CFG_INIT_RAM1_ADDR	(CFG_INIT_RAM_ADDR + CFG_INIT_RAM_END)
+#define CFG_INIT_RAM1_END	0x1000	/* End of used area in internal SRAM */
+#define CFG_INIT_RAM1_CTRL	0x21
+#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET	((CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) - 0x10)
+#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+
+/*-----------------------------------------------------------------------
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ */
+#define CFG_SDRAM_BASE		0x00000000
+#define CFG_SDRAM_CFG1		0x73711630
+#define CFG_SDRAM_CFG2		0x46370000
+#define CFG_SDRAM_CTRL		0xE10B0000
+#define CFG_SDRAM_EMOD		0x40010000
+#define CFG_SDRAM_MODE		0x018D0000
+#define CFG_SDRAM_DRVSTRENGTH	0x000002AA
+#ifdef CFG_DRAMSZ1
+#	define CFG_SDRAM_SIZE	(CFG_DRAMSZ + CFG_DRAMSZ1)
+#else
+#	define CFG_SDRAM_SIZE	CFG_DRAMSZ
+#endif
+
+#define CFG_MEMTEST_START	CFG_SDRAM_BASE + 0x400
+#define CFG_MEMTEST_END		((CFG_SDRAM_SIZE - 3) << 20)
+
+#define CFG_MONITOR_BASE	(CFG_FLASH_BASE + 0x400)
+#define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor */
+
+#define CFG_BOOTPARAMS_LEN	64*1024
+#define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc() */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization ??
+ */
+#define CFG_BOOTMAPSZ		(CFG_SDRAM_BASE + (CFG_SDRAM_SIZE << 20))
+
+/*-----------------------------------------------------------------------
+ * FLASH organization
+ */
+#define CFG_FLASH_CFI
+#ifdef CFG_FLASH_CFI
+#	define CFG_FLASH_BASE		(CFG_CS0_BASE)
+#	define CFG_FLASH_CFI_DRIVER	1
+#	define CFG_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
+#	define CFG_MAX_FLASH_SECT	137	/* max number of sectors on one chip */
+#	define CFG_FLASH_PROTECTION	/* "Real" (hardware) sectors protection */
+#	define CFG_FLASH_USE_BUFFER_WRITE
+#ifdef CFG_NOR1SZ
+#	define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks */
+#	define CFG_FLASH_SIZE		((CFG_NOR1SZ + CFG_BOOTSZ) << 20)
+#	define CFG_FLASH_BANKS_LIST	{ CFG_CS0_BASE, CFG_CS1_BASE }
+#else
+#	define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks */
+#	define CFG_FLASH_SIZE		(CFG_BOOTSZ << 20)
+#endif
+#endif
+
+/* Configuration for environment
+ * Environment is embedded in u-boot in the second sector of the flash
+ */
+#define CFG_ENV_OFFSET		0x2000
+#define CFG_ENV_SECT_SIZE	0x2000
+#define CFG_ENV_IS_IN_FLASH	1
+#define CFG_ENV_IS_EMBEDDED	1
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_CACHELINE_SIZE	16
+
+/*-----------------------------------------------------------------------
+ * Chipselect bank definitions
+ */
+/*
+ * CS0 - NOR Flash 1, 2, 4, or 8MB
+ * CS1 - NOR Flash
+ * CS2 - Available
+ * CS3 - Available
+ * CS4 - Available
+ * CS5 - Available
+ */
+#define CFG_CS0_BASE		0xFF800000
+#define CFG_CS0_MASK		(((CFG_BOOTSZ << 20) - 1) & 0xFFFF0001)
+#define CFG_CS0_CTRL		0x00101980
+
+#ifdef CFG_NOR1SZ
+#define CFG_CS1_BASE		0xF8000000
+#define CFG_CS1_MASK		(((CFG_NOR1SZ << 20) - 1) & 0xFFFF0001)
+#define CFG_CS1_CTRL		0x00000D80
+#endif
+
+#endif				/* _M5475EVB_H */
diff --git a/include/configs/M5485EVB.h b/include/configs/M5485EVB.h
new file mode 100644
index 0000000..e9e5ee9
--- /dev/null
+++ b/include/configs/M5485EVB.h
@@ -0,0 +1,296 @@
+/*
+ * Configuation settings for the Freescale MCF5485 FireEngine board.
+ *
+ * Copyright (C) 2004-2008 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * board/config.h - configuration options, board specific
+ */
+
+#ifndef _M5485EVB_H
+#define _M5485EVB_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+#define CONFIG_MCF547x_8x	/* define processor family */
+#define CONFIG_M548x		/* define processor type */
+#define CONFIG_M5485		/* define processor type */
+
+#undef DEBUG
+
+#define CONFIG_MCFUART
+#define CFG_UART_PORT		(0)
+#define CONFIG_BAUDRATE		115200
+#define CFG_BAUDRATE_TABLE	{ 9600 , 19200 , 38400 , 57600, 115200 }
+
+#define CONFIG_HW_WATCHDOG
+#define CONFIG_WATCHDOG_TIMEOUT	5000	/* timeout in milliseconds, max timeout is 6.71sec */
+
+/* Command line configuration */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_CACHE
+#undef CONFIG_CMD_DATE
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_MISC
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_USB
+
+#define CONFIG_SLTTMR
+
+#define CONFIG_FSLDMAFEC
+#ifdef CONFIG_FSLDMAFEC
+#	define CONFIG_NET_MULTI		1
+#	define CONFIG_MII		1
+#	define CONFIG_HAS_ETH1
+
+#	define CFG_DISCOVER_PHY
+#	define CFG_RX_ETH_BUFFER	32
+#	define CFG_TX_ETH_BUFFER	48
+#	define CFG_FAULT_ECHO_LINK_DOWN
+
+#	define CFG_FEC0_PINMUX		0
+#	define CFG_FEC0_MIIBASE		CFG_FEC0_IOBASE
+#	define CFG_FEC1_PINMUX		0
+#	define CFG_FEC1_MIIBASE		CFG_FEC0_IOBASE
+
+#	define MCFFEC_TOUT_LOOP 	50000
+/* If CFG_DISCOVER_PHY is not defined - hardcoded */
+#	ifndef CFG_DISCOVER_PHY
+#		define FECDUPLEX	FULL
+#		define FECSPEED		_100BASET
+#	else
+#		ifndef CFG_FAULT_ECHO_LINK_DOWN
+#			define CFG_FAULT_ECHO_LINK_DOWN
+#		endif
+#	endif			/* CFG_DISCOVER_PHY */
+
+#	define CONFIG_ETHADDR	00:e0:0c:bc:e5:60
+#	define CONFIG_ETH1ADDR	00:e0:0c:bc:e5:61
+#	define CONFIG_IPADDR	192.162.1.2
+#	define CONFIG_NETMASK	255.255.255.0
+#	define CONFIG_SERVERIP	192.162.1.1
+#	define CONFIG_GATEWAYIP	192.162.1.1
+#	define CONFIG_OVERWRITE_ETHADDR_ONCE
+
+#endif
+
+#ifdef CONFIG_CMD_USB
+#	define CONFIG_USB_STORAGE
+#	define CONFIG_DOS_PARTITION
+#	define CONFIG_USB_OHCI_NEW
+#	ifndef CONFIG_CMD_PCI
+#		define CONFIG_CMD_PCI
+#	endif
+/*#	define CONFIG_PCI_OHCI*/
+#	define CFG_USB_OHCI_REGS_BASE		0x80041000
+#	define CFG_USB_OHCI_MAX_ROOT_PORTS	15
+#	define CFG_USB_OHCI_SLOT_NAME		"isp1561"
+#	define CFG_OHCI_SWAP_REG_ACCESS
+#endif
+
+/* I2C */
+#define CONFIG_FSL_I2C
+#define CONFIG_HARD_I2C		/* I2C with hw support */
+#undef CONFIG_SOFT_I2C		/* I2C bit-banged */
+#define CFG_I2C_SPEED		80000
+#define CFG_I2C_SLAVE		0x7F
+#define CFG_I2C_OFFSET		0x00008F00
+#define CFG_IMMR		CFG_MBAR
+
+/* PCI */
+#ifdef CONFIG_CMD_PCI
+#define CONFIG_PCI		1
+#define CONFIG_PCI_PNP		1
+
+#define CFG_PCI_MEM_BUS		0x80000000
+#define CFG_PCI_MEM_PHYS	CFG_PCI_MEM_BUS
+#define CFG_PCI_MEM_SIZE	0x10000000
+
+#define CFG_PCI_IO_BUS		0x71000000
+#define CFG_PCI_IO_PHYS		CFG_PCI_IO_BUS
+#define CFG_PCI_IO_SIZE		0x01000000
+
+#define CFG_PCI_CFG_BUS		0x70000000
+#define CFG_PCI_CFG_PHYS	CFG_PCI_CFG_BUS
+#define CFG_PCI_CFG_SIZE	0x01000000
+#endif
+
+#define CONFIG_BOOTDELAY	1	/* autoboot after 5 seconds */
+#define CONFIG_UDP_CHECKSUM
+
+#define CONFIG_HOSTNAME		M548xEVB
+#define CONFIG_EXTRA_ENV_SETTINGS		\
+	"netdev=eth0\0"				\
+	"loadaddr=10000\0"			\
+	"u-boot=u-boot.bin\0"			\
+	"load=tftp ${loadaddr) ${u-boot}\0"	\
+	"upd=run load; run prog\0"		\
+	"prog=prot off bank 1;"			\
+	"era ff800000 ff82ffff;"		\
+	"cp.b ${loadaddr} ff800000 ${filesize};"\
+	"save\0"				\
+	""
+
+#define CONFIG_PRAM		512	/* 512 KB */
+#define CFG_PROMPT		"-> "
+#define CFG_LONGHELP		/* undef to save memory */
+
+#ifdef CONFIG_CMD_KGDB
+#	define CFG_CBSIZE	1024	/* Console I/O Buffer Size */
+#else
+#	define CFG_CBSIZE	256	/* Console I/O Buffer Size */
+#endif
+
+#define CFG_PBSIZE		(CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size */
+#define CFG_MAXARGS		16	/* max number of command args */
+#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size    */
+#define CFG_LOAD_ADDR		0x00010000
+
+#define CFG_HZ			1000
+#define CFG_CLK			CFG_BUSCLK
+#define CFG_CPU_CLK		CFG_CLK * 2
+
+#define CFG_MBAR		0xF0000000
+#define CFG_INTSRAM		(CFG_MBAR + 0x10000)
+#define CFG_INTSRAMSZ		0x8000
+
+/*#define CFG_LATCH_ADDR		(CFG_CS1_BASE + 0x80000)*/
+
+/*
+ * Low Level Configuration Settings
+ * (address mappings, register initial values, etc.)
+ * You should know what you are doing if you make changes here.
+ */
+/*-----------------------------------------------------------------------
+ * Definitions for initial stack pointer and data area (in DPRAM)
+ */
+#define CFG_INIT_RAM_ADDR	0xF2000000
+#define CFG_INIT_RAM_END	0x1000	/* End of used area in internal SRAM */
+#define CFG_INIT_RAM_CTRL	0x21
+#define CFG_INIT_RAM1_ADDR	(CFG_INIT_RAM_ADDR + CFG_INIT_RAM_END)
+#define CFG_INIT_RAM1_END	0x1000	/* End of used area in internal SRAM */
+#define CFG_INIT_RAM1_CTRL	0x21
+#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET	((CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) - 0x10)
+#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+
+/*-----------------------------------------------------------------------
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ */
+#define CFG_SDRAM_BASE		0x00000000
+#define CFG_SDRAM_CFG1		0x73711630
+#define CFG_SDRAM_CFG2		0x46370000
+#define CFG_SDRAM_CTRL		0xE10B0000
+#define CFG_SDRAM_EMOD		0x40010000
+#define CFG_SDRAM_MODE		0x018D0000
+#define CFG_SDRAM_DRVSTRENGTH	0x000002AA
+#ifdef CFG_DRAMSZ1
+#	define CFG_SDRAM_SIZE	(CFG_DRAMSZ + CFG_DRAMSZ1)
+#else
+#	define CFG_SDRAM_SIZE	CFG_DRAMSZ
+#endif
+
+#define CFG_MEMTEST_START	CFG_SDRAM_BASE + 0x400
+#define CFG_MEMTEST_END		((CFG_SDRAM_SIZE - 3) << 20)
+
+#define CFG_MONITOR_BASE	(CFG_FLASH_BASE + 0x400)
+#define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor */
+
+#define CFG_BOOTPARAMS_LEN	64*1024
+#define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc() */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization ??
+ */
+#define CFG_BOOTMAPSZ		(CFG_SDRAM_BASE + (CFG_SDRAM_SIZE << 20))
+
+/*-----------------------------------------------------------------------
+ * FLASH organization
+ */
+#define CFG_FLASH_CFI
+#ifdef CFG_FLASH_CFI
+#	define CFG_FLASH_BASE		(CFG_CS0_BASE)
+#	define CFG_FLASH_CFI_DRIVER	1
+#	define CFG_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
+#	define CFG_MAX_FLASH_SECT	137	/* max number of sectors on one chip */
+#	define CFG_FLASH_PROTECTION	/* "Real" (hardware) sectors protection */
+#	define CFG_FLASH_USE_BUFFER_WRITE
+#ifdef CFG_NOR1SZ
+#	define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks */
+#	define CFG_FLASH_SIZE		((CFG_NOR1SZ + CFG_BOOTSZ) << 20)
+#	define CFG_FLASH_BANKS_LIST	{ CFG_CS0_BASE, CFG_CS1_BASE }
+#else
+#	define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks */
+#	define CFG_FLASH_SIZE		(CFG_BOOTSZ << 20)
+#endif
+#endif
+
+/* Configuration for environment
+ * Environment is embedded in u-boot in the second sector of the flash
+ */
+#define CFG_ENV_OFFSET		0x2000
+#define CFG_ENV_SECT_SIZE	0x2000
+#define CFG_ENV_IS_IN_FLASH	1
+#define CFG_ENV_IS_EMBEDDED	1
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_CACHELINE_SIZE	16
+
+/*-----------------------------------------------------------------------
+ * Chipselect bank definitions
+ */
+/*
+ * CS0 - NOR Flash 1, 2, 4, or 8MB
+ * CS1 - NOR Flash
+ * CS2 - Available
+ * CS3 - Available
+ * CS4 - Available
+ * CS5 - Available
+ */
+#define CFG_CS0_BASE		0xFF800000
+#define CFG_CS0_MASK		(((CFG_BOOTSZ << 20) - 1) & 0xFFFF0001)
+#define CFG_CS0_CTRL		0x00101980
+
+#ifdef CFG_NOR1SZ
+#define CFG_CS1_BASE		0xF8000000
+#define CFG_CS1_MASK		(((CFG_NOR1SZ << 20) - 1) & 0xFFFF0001)
+#define CFG_CS1_CTRL		0x00000D80
+#endif
+
+#endif				/* _M5485EVB_H */