Rename common ns16550 constants with UART_ prefix to prevent conflicts

Fix problems introduced in commit
7b5611cdd12ca0cc33f994f0d4a4454788fc3124 [inka4x0: Add hardware
diagnosis functions for inka4x0] which redefined MSR_RI which is
already used on PowerPC systems.

Also eliminate redundant definitions in ps2mult.h.  More cleanup will
be needed for other redundant occurrences though.

Signed-off-by: Detlev Zundel <dzu@denx.de>

6 files changed, 139 insertions, 182 deletions

diff --git a/board/inka4x0/inkadiag.c b/board/inka4x0/inkadiag.c
index 06c9807..12c0a85 100644
--- a/board/inka4x0/inkadiag.c
+++ b/board/inka4x0/inkadiag.c
@@ -280,48 +280,48 @@ static int do_inkadiag_serial(cmd_tbl_t *cmdtp, int flag, int argc,
 	if ((num >= 0) && (num <= 7)) {
 		if (mode & 1) {
 			/* turn on 'loopback' mode */
-			out_8(&uart->mcr, MCR_LOOP);
+			out_8(&uart->mcr, UART_MCR_LOOP);
 		} else {
 			/*
 			 * establish the UART's operational parameters
 			 * set DLAB=1, so rbr accesses DLL
 			 */
-			out_8(&uart->lcr, LCR_DLAB);
+			out_8(&uart->lcr, UART_LCR_DLAB);
 			/* set baudrate */
 			out_8(&uart->rbr, combrd);
 			/* set data-format: 8-N-1 */
-			out_8(&uart->lcr, LCR_WLS_8);
+			out_8(&uart->lcr, UART_LCR_WLS_8);
 		}
 
 		if (mode & 2) {
 			/* set request to send */
-			out_8(&uart->mcr, MCR_RTS);
+			out_8(&uart->mcr, UART_MCR_RTS);
 			udelay(10);
 			/* check clear to send */
-			if ((in_8(&uart->msr) & MSR_CTS) == 0x00)
+			if ((in_8(&uart->msr) & UART_MSR_CTS) == 0x00)
 				return -1;
 		}
 		if (mode & 4) {
 			/* set data terminal ready */
-			out_8(&uart->mcr, MCR_DTR);
+			out_8(&uart->mcr, UART_MCR_DTR);
 			udelay(10);
 			/* check data set ready and carrier detect */
-			if ((in_8(&uart->msr) & (MSR_DSR | MSR_DCD))
-			    != (MSR_DSR | MSR_DCD))
+			if ((in_8(&uart->msr) & (UART_MSR_DSR | UART_MSR_DCD))
+			    != (UART_MSR_DSR | UART_MSR_DCD))
 				return -1;
 		}
 
 		/* write each message-character, read it back, and display it */
 		for (i = 0, len = strlen(argv[3]); i < len; ++i) {
 			j = 0;
-			while ((in_8(&uart->lsr) & LSR_THRE) ==	0x00) {
+			while ((in_8(&uart->lsr) & UART_LSR_THRE) ==	0x00) {
 				if (j++ > CONFIG_SYS_HZ)
 					break;
 				udelay(10);
 			}
 			out_8(&uart->rbr, argv[3][i]);
 			j = 0;
-			while ((in_8(&uart->lsr) & LSR_DR) == 0x00) {
+			while ((in_8(&uart->lsr) & UART_LSR_DR) == 0x00) {
 				if (j++ > CONFIG_SYS_HZ)
 					break;
 				udelay(10);
diff --git a/board/linkstation/avr.c b/board/linkstation/avr.c
index fda1b91..782b24a 100644
--- a/board/linkstation/avr.c
+++ b/board/linkstation/avr.c
@@ -90,12 +90,12 @@ void init_AVR_DUART (void)
 	 */
 	AVR_port->lcr = 0x00;
 	AVR_port->ier = 0x00;
-	AVR_port->lcr = LCR_BKSE;
+	AVR_port->lcr = UART_LCR_BKSE;
 	AVR_port->dll = clock_divisor & 0xff;
 	AVR_port->dlm = (clock_divisor >> 8) & 0xff;
-	AVR_port->lcr = LCR_WLS_8 | LCR_PEN | LCR_EPS;
+	AVR_port->lcr = UART_LCR_WLS_8 | UART_LCR_PEN | UART_LCR_EPS;
 	AVR_port->mcr = 0x00;
-	AVR_port->fcr = FCR_FIFO_EN | FCR_RXSR | FCR_TXSR;
+	AVR_port->fcr = UART_FCR_FIFO_EN | UART_FCR_RXSR | UART_FCR_TXSR;
 
 	miconCntl_DisWDT();
 
diff --git a/drivers/input/ps2ser.c b/drivers/input/ps2ser.c
index 1af3fde..1a5e2d4 100644
--- a/drivers/input/ps2ser.c
+++ b/drivers/input/ps2ser.c
@@ -1,6 +1,6 @@
 /***********************************************************************
  *
- * (C) Copyright 2004
+ * (C) Copyright 2004-2009
  * DENX Software Engineering
  * Wolfgang Denk, wd@denx.de
  * All rights reserved.
@@ -18,9 +18,11 @@
 #include <asm/io.h>
 #include <asm/atomic.h>
 #include <ps2mult.h>
-#if defined(CONFIG_SYS_NS16550) || defined(CONFIG_MPC85xx)
-#include <ns16550.h>
+/* This is needed for ns16550.h */
+#ifndef CONFIG_SYS_NS16550_REG_SIZE
+#define CONFIG_SYS_NS16550_REG_SIZE 1
 #endif
+#include <ns16550.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -128,12 +130,12 @@ int ps2ser_init(void)
 	NS16550_t com_port = (NS16550_t)COM_BASE;
 
 	com_port->ier = 0x00;
-	com_port->lcr = LCR_BKSE | LCR_8N1;
+	com_port->lcr = UART_LCR_BKSE | UART_LCR_8N1;
 	com_port->dll = (CONFIG_SYS_NS16550_CLK / 16 / PS2SER_BAUD) & 0xff;
 	com_port->dlm = ((CONFIG_SYS_NS16550_CLK / 16 / PS2SER_BAUD) >> 8) & 0xff;
-	com_port->lcr = LCR_8N1;
-	com_port->mcr = (MCR_DTR | MCR_RTS);
-	com_port->fcr = (FCR_FIFO_EN | FCR_RXSR | FCR_TXSR);
+	com_port->lcr = UART_LCR_8N1;
+	com_port->mcr = (UART_MCR_DTR | UART_MCR_RTS);
+	com_port->fcr = (UART_FCR_FIFO_EN | UART_FCR_RXSR | UART_FCR_TXSR);
 
 	return (0);
 }
@@ -202,7 +204,7 @@ void ps2ser_putc(int chr)
 	psc->psc_buffer_8 = chr;
 #elif defined(CONFIG_MPC8540) || defined(CONFIG_MPC8541) || \
       defined(CONFIG_MPC8548) || defined(CONFIG_MPC8555)
-	while ((com_port->lsr & LSR_THRE) == 0);
+	while ((com_port->lsr & UART_LSR_THRE) == 0);
 	com_port->thr = chr;
 #else
 	while (!(ps2ser_in(UART_LSR) & UART_LSR_THRE));
@@ -227,7 +229,7 @@ static int ps2ser_getc_hw(void)
 	}
 #elif defined(CONFIG_MPC8540) || defined(CONFIG_MPC8541) || \
       defined(CONFIG_MPC8548) || defined(CONFIG_MPC8555)
-	if (com_port->lsr & LSR_DR) {
+	if (com_port->lsr & UART_LSR_DR) {
 		res = com_port->rbr;
 	}
 #else
@@ -315,7 +317,7 @@ static void ps2ser_interrupt(void *dev_id)
 	} while (status & PSC_SR_RXRDY);
 #elif defined(CONFIG_MPC8540) || defined(CONFIG_MPC8541) || \
       defined(CONFIG_MPC8548) || defined(CONFIG_MPC8555)
-	} while (status & LSR_DR);
+	} while (status & UART_LSR_DR);
 #else
 	} while (status & UART_IIR_RDI);
 #endif
diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c
index 397f5df..657c9da 100644
--- a/drivers/serial/ns16550.c
+++ b/drivers/serial/ns16550.c
@@ -7,9 +7,12 @@
 #include <config.h>
 #include <ns16550.h>
 
-#define LCRVAL LCR_8N1					/* 8 data, 1 stop, no parity */
-#define MCRVAL (MCR_DTR | MCR_RTS)			/* RTS/DTR */
-#define FCRVAL (FCR_FIFO_EN | FCR_RXSR | FCR_TXSR)	/* Clear & enable FIFOs */
+#define UART_LCRVAL UART_LCR_8N1		/* 8 data, 1 stop, no parity */
+#define UART_MCRVAL (UART_MCR_DTR | \
+		     UART_MCR_RTS)		/* RTS/DTR */
+#define UART_FCRVAL (UART_FCR_FIFO_EN |	\
+		     UART_FCR_RXSR |	\
+		     UART_FCR_TXSR)		/* Clear & enable FIFOs */
 
 void NS16550_init (NS16550_t com_port, int baud_divisor)
 {
@@ -17,16 +20,16 @@ void NS16550_init (NS16550_t com_port, int baud_divisor)
 #ifdef CONFIG_OMAP
 	com_port->mdr1 = 0x7;	/* mode select reset TL16C750*/
 #endif
-	com_port->lcr = LCR_BKSE | LCRVAL;
+	com_port->lcr = UART_LCR_BKSE | UART_LCRVAL;
 	com_port->dll = 0;
 	com_port->dlm = 0;
-	com_port->lcr = LCRVAL;
-	com_port->mcr = MCRVAL;
-	com_port->fcr = FCRVAL;
-	com_port->lcr = LCR_BKSE | LCRVAL;
+	com_port->lcr = UART_LCRVAL;
+	com_port->mcr = UART_MCRVAL;
+	com_port->fcr = UART_FCRVAL;
+	com_port->lcr = UART_LCR_BKSE | UART_LCRVAL;
 	com_port->dll = baud_divisor & 0xff;
 	com_port->dlm = (baud_divisor >> 8) & 0xff;
-	com_port->lcr = LCRVAL;
+	com_port->lcr = UART_LCRVAL;
 #if defined(CONFIG_OMAP)
 #if defined(CONFIG_APTIX)
 	com_port->mdr1 = 3;	/* /13 mode so Aptix 6MHz can hit 115200 */
@@ -40,29 +43,29 @@ void NS16550_init (NS16550_t com_port, int baud_divisor)
 void NS16550_reinit (NS16550_t com_port, int baud_divisor)
 {
 	com_port->ier = 0x00;
-	com_port->lcr = LCR_BKSE | LCRVAL;
+	com_port->lcr = UART_LCR_BKSE | UART_LCRVAL;
 	com_port->dll = 0;
 	com_port->dlm = 0;
-	com_port->lcr = LCRVAL;
-	com_port->mcr = MCRVAL;
-	com_port->fcr = FCRVAL;
-	com_port->lcr = LCR_BKSE;
+	com_port->lcr = UART_LCRVAL;
+	com_port->mcr = UART_MCRVAL;
+	com_port->fcr = UART_FCRVAL;
+	com_port->lcr = UART_LCR_BKSE;
 	com_port->dll = baud_divisor & 0xff;
 	com_port->dlm = (baud_divisor >> 8) & 0xff;
-	com_port->lcr = LCRVAL;
+	com_port->lcr = UART_LCRVAL;
 }
 #endif /* CONFIG_NS16550_MIN_FUNCTIONS */
 
 void NS16550_putc (NS16550_t com_port, char c)
 {
-	while ((com_port->lsr & LSR_THRE) == 0);
+	while ((com_port->lsr & UART_LSR_THRE) == 0);
 	com_port->thr = c;
 }
 
 #ifndef CONFIG_NS16550_MIN_FUNCTIONS
 char NS16550_getc (NS16550_t com_port)
 {
-	while ((com_port->lsr & LSR_DR) == 0) {
+	while ((com_port->lsr & UART_LSR_DR) == 0) {
 #ifdef CONFIG_USB_TTY
 		extern void usbtty_poll(void);
 		usbtty_poll();
@@ -73,7 +76,7 @@ char NS16550_getc (NS16550_t com_port)
 
 int NS16550_tstc (NS16550_t com_port)
 {
-	return ((com_port->lsr & LSR_DR) != 0);
+	return ((com_port->lsr & UART_LSR_DR) != 0);
 }
 
 #endif /* CONFIG_NS16550_MIN_FUNCTIONS */
diff --git a/include/ns16550.h b/include/ns16550.h
index edfbc53..87624bf 100644
--- a/include/ns16550.h
+++ b/include/ns16550.h
@@ -1,6 +1,10 @@
 /*
  * NS16550 Serial Port
  * originally from linux source (arch/ppc/boot/ns16550.h)
+ *
+ * Cleanup and unification
+ * (C) 2009 by Detlev Zundel, DENX Software Engineering GmbH
+ *
  * modified slightly to
  * have addresses as offsets from CONFIG_SYS_ISA_BASE
  * added a few more definitions
@@ -115,53 +119,100 @@ struct NS16550 {
 
 typedef volatile struct NS16550 *NS16550_t;
 
-#define FCR_FIFO_EN     0x01		/* Fifo enable */
-#define FCR_RXSR        0x02		/* Receiver soft reset */
-#define FCR_TXSR        0x04		/* Transmitter soft reset */
-
-#define MCR_DTR         0x01
-#define MCR_RTS         0x02
-#define MCR_DMA_EN      0x04
-#define MCR_TX_DFR      0x08
-#define MCR_LOOP	0x10		/* Enable loopback test mode */
-
-#define LCR_WLS_MSK	0x03		/* character length select mask */
-#define LCR_WLS_5	0x00		/* 5 bit character length */
-#define LCR_WLS_6	0x01		/* 6 bit character length */
-#define LCR_WLS_7	0x02		/* 7 bit character length */
-#define LCR_WLS_8	0x03		/* 8 bit character length */
-#define LCR_STB		0x04		/* Number of stop Bits, off = 1, on = 1.5 or 2) */
-#define LCR_PEN		0x08		/* Parity eneble */
-#define LCR_EPS		0x10		/* Even Parity Select */
-#define LCR_STKP	0x20		/* Stick Parity */
-#define LCR_SBRK	0x40		/* Set Break */
-#define LCR_BKSE	0x80		/* Bank select enable */
-#define LCR_DLAB	0x80		/* Divisor latch access bit */
-
-#define LSR_DR		0x01		/* Data ready */
-#define LSR_OE		0x02		/* Overrun */
-#define LSR_PE		0x04		/* Parity error */
-#define LSR_FE		0x08		/* Framing error */
-#define LSR_BI		0x10		/* Break */
-#define LSR_THRE	0x20		/* Xmit holding register empty */
-#define LSR_TEMT	0x40		/* Xmitter empty */
-#define LSR_ERR		0x80		/* Error */
-
-#define MSR_DCD		0x80		/* Data Carrier Detect */
-#define MSR_RI		0x40		/* Ring Indicator */
-#define MSR_DSR		0x20		/* Data Set Ready */
-#define MSR_CTS		0x10		/* Clear to Send */
-#define MSR_DDCD	0x08		/* Delta DCD */
-#define MSR_TERI	0x04		/* Trailing edge ring indicator */
-#define MSR_DDSR	0x02		/* Delta DSR */
-#define MSR_DCTS	0x01		/* Delta CTS */
+/*
+ * These are the definitions for the FIFO Control Register
+ */
+#define UART_FCR_FIFO_EN 	0x01 /* Fifo enable */
+#define UART_FCR_CLEAR_RCVR	0x02 /* Clear the RCVR FIFO */
+#define UART_FCR_CLEAR_XMIT	0x04 /* Clear the XMIT FIFO */
+#define UART_FCR_DMA_SELECT	0x08 /* For DMA applications */
+#define UART_FCR_TRIGGER_MASK	0xC0 /* Mask for the FIFO trigger range */
+#define UART_FCR_TRIGGER_1	0x00 /* Mask for trigger set at 1 */
+#define UART_FCR_TRIGGER_4	0x40 /* Mask for trigger set at 4 */
+#define UART_FCR_TRIGGER_8	0x80 /* Mask for trigger set at 8 */
+#define UART_FCR_TRIGGER_14	0xC0 /* Mask for trigger set at 14 */
+
+#define UART_FCR_RXSR		0x02 /* Receiver soft reset */
+#define UART_FCR_TXSR		0x04 /* Transmitter soft reset */
+
+/*
+ * These are the definitions for the Modem Control Register
+ */
+#define UART_MCR_DTR	0x01		/* DTR   */
+#define UART_MCR_RTS	0x02		/* RTS   */
+#define UART_MCR_OUT1	0x04		/* Out 1 */
+#define UART_MCR_OUT2	0x08		/* Out 2 */
+#define UART_MCR_LOOP	0x10		/* Enable loopback test mode */
+
+#define UART_MCR_DMA_EN	0x04
+#define UART_MCR_TX_DFR	0x08
+
+/*
+ * These are the definitions for the Line Control Register
+ *
+ * Note: if the word length is 5 bits (UART_LCR_WLEN5), then setting
+ * UART_LCR_STOP will select 1.5 stop bits, not 2 stop bits.
+ */
+#define UART_LCR_WLS_MSK 0x03		/* character length select mask */
+#define UART_LCR_WLS_5	0x00		/* 5 bit character length */
+#define UART_LCR_WLS_6	0x01		/* 6 bit character length */
+#define UART_LCR_WLS_7	0x02		/* 7 bit character length */
+#define UART_LCR_WLS_8	0x03		/* 8 bit character length */
+#define UART_LCR_STB	0x04		/* Number of stop Bits, off = 1, on = 1.5 or 2) */
+#define UART_LCR_PEN	0x08		/* Parity eneble */
+#define UART_LCR_EPS	0x10		/* Even Parity Select */
+#define UART_LCR_STKP	0x20		/* Stick Parity */
+#define UART_LCR_SBRK	0x40		/* Set Break */
+#define UART_LCR_BKSE	0x80		/* Bank select enable */
+#define UART_LCR_DLAB	0x80		/* Divisor latch access bit */
+
+/*
+ * These are the definitions for the Line Status Register
+ */
+#define UART_LSR_DR	0x01		/* Data ready */
+#define UART_LSR_OE	0x02		/* Overrun */
+#define UART_LSR_PE	0x04		/* Parity error */
+#define UART_LSR_FE	0x08		/* Framing error */
+#define UART_LSR_BI	0x10		/* Break */
+#define UART_LSR_THRE	0x20		/* Xmit holding register empty */
+#define UART_LSR_TEMT	0x40		/* Xmitter empty */
+#define UART_LSR_ERR	0x80		/* Error */
+
+#define UART_MSR_DCD	0x80		/* Data Carrier Detect */
+#define UART_MSR_RI	0x40		/* Ring Indicator */
+#define UART_MSR_DSR	0x20		/* Data Set Ready */
+#define UART_MSR_CTS	0x10		/* Clear to Send */
+#define UART_MSR_DDCD	0x08		/* Delta DCD */
+#define UART_MSR_TERI	0x04		/* Trailing edge ring indicator */
+#define UART_MSR_DDSR	0x02		/* Delta DSR */
+#define UART_MSR_DCTS	0x01		/* Delta CTS */
+
+/*
+ * These are the definitions for the Interrupt Identification Register
+ */
+#define UART_IIR_NO_INT	0x01	/* No interrupts pending */
+#define UART_IIR_ID	0x06	/* Mask for the interrupt ID */
+
+#define UART_IIR_MSI	0x00	/* Modem status interrupt */
+#define UART_IIR_THRI	0x02	/* Transmitter holding register empty */
+#define UART_IIR_RDI	0x04	/* Receiver data interrupt */
+#define UART_IIR_RLSI	0x06	/* Receiver line status interrupt */
+
+/*
+ * These are the definitions for the Interrupt Enable Register
+ */
+#define UART_IER_MSI	0x08	/* Enable Modem status interrupt */
+#define UART_IER_RLSI	0x04	/* Enable receiver line status interrupt */
+#define UART_IER_THRI	0x02	/* Enable Transmitter holding register int. */
+#define UART_IER_RDI	0x01	/* Enable receiver data interrupt */
+
 
 #ifdef CONFIG_OMAP1510
-#define OSC_12M_SEL	0x01		/* selects 6.5 * current clk div */
+#define OSC_12M_SEL	0x01	/* selects 6.5 * current clk div */
 #endif
 
 /* useful defaults for LCR */
-#define LCR_8N1		0x03
+#define UART_LCR_8N1	0x03
 
 void	NS16550_init   (NS16550_t com_port, int baud_divisor);
 void	NS16550_putc   (NS16550_t com_port, char c);
diff --git a/include/ps2mult.h b/include/ps2mult.h
index 599cb6d..1a38733 100644
--- a/include/ps2mult.h
+++ b/include/ps2mult.h
@@ -53,103 +53,4 @@ struct serial_state {
 	u8	*iomem_base;
 };
 
-#define UART_RX		0	/* In:  Receive buffer (DLAB=0) */
-#define UART_TX		0	/* Out: Transmit buffer (DLAB=0) */
-#define UART_DLL	0	/* Out: Divisor Latch Low (DLAB=1) */
-
-#define UART_DLM	1	/* Out: Divisor Latch High (DLAB=1) */
-#define UART_IER	1	/* Out: Interrupt Enable Register */
-
-#define UART_IIR	2	/* In:  Interrupt ID Register */
-#define UART_FCR	2	/* Out: FIFO Control Register */
-
-#define UART_LCR	3	/* Out: Line Control Register */
-#define UART_MCR	4	/* Out: Modem Control Register */
-#define UART_LSR	5	/* In:  Line Status Register */
-#define UART_MSR	6	/* In:  Modem Status Register */
-#define UART_SCR	7	/* I/O: Scratch Register */
-
-/*
- * These are the definitions for the FIFO Control Register
- * (16650 only)
- */
-#define UART_FCR_ENABLE_FIFO	0x01 /* Enable the FIFO */
-#define UART_FCR_CLEAR_RCVR	0x02 /* Clear the RCVR FIFO */
-#define UART_FCR_CLEAR_XMIT	0x04 /* Clear the XMIT FIFO */
-#define UART_FCR_DMA_SELECT	0x08 /* For DMA applications */
-#define UART_FCR_TRIGGER_MASK	0xC0 /* Mask for the FIFO trigger range */
-#define UART_FCR_TRIGGER_1	0x00 /* Mask for trigger set at 1 */
-#define UART_FCR_TRIGGER_4	0x40 /* Mask for trigger set at 4 */
-#define UART_FCR_TRIGGER_8	0x80 /* Mask for trigger set at 8 */
-#define UART_FCR_TRIGGER_14	0xC0 /* Mask for trigger set at 14 */
-
-/*
- * These are the definitions for the Line Control Register
- *
- * Note: if the word length is 5 bits (UART_LCR_WLEN5), then setting
- * UART_LCR_STOP will select 1.5 stop bits, not 2 stop bits.
- */
-#define UART_LCR_DLAB	0x80	/* Divisor latch access bit */
-#define UART_LCR_SBC	0x40	/* Set break control */
-#define UART_LCR_SPAR	0x20	/* Stick parity (?) */
-#define UART_LCR_EPAR	0x10	/* Even parity select */
-#define UART_LCR_PARITY	0x08	/* Parity Enable */
-#define UART_LCR_STOP	0x04	/* Stop bits: 0=1 stop bit, 1= 2 stop bits */
-#define UART_LCR_WLEN5  0x00	/* Wordlength: 5 bits */
-#define UART_LCR_WLEN6  0x01	/* Wordlength: 6 bits */
-#define UART_LCR_WLEN7  0x02	/* Wordlength: 7 bits */
-#define UART_LCR_WLEN8  0x03	/* Wordlength: 8 bits */
-
-/*
- * These are the definitions for the Line Status Register
- */
-#define UART_LSR_TEMT	0x40	/* Transmitter empty */
-#define UART_LSR_THRE	0x20	/* Transmit-hold-register empty */
-#define UART_LSR_BI	0x10	/* Break interrupt indicator */
-#define UART_LSR_FE	0x08	/* Frame error indicator */
-#define UART_LSR_PE	0x04	/* Parity error indicator */
-#define UART_LSR_OE	0x02	/* Overrun error indicator */
-#define UART_LSR_DR	0x01	/* Receiver data ready */
-
-/*
- * These are the definitions for the Interrupt Identification Register
- */
-#define UART_IIR_NO_INT	0x01	/* No interrupts pending */
-#define UART_IIR_ID	0x06	/* Mask for the interrupt ID */
-
-#define UART_IIR_MSI	0x00	/* Modem status interrupt */
-#define UART_IIR_THRI	0x02	/* Transmitter holding register empty */
-#define UART_IIR_RDI	0x04	/* Receiver data interrupt */
-#define UART_IIR_RLSI	0x06	/* Receiver line status interrupt */
-
-/*
- * These are the definitions for the Interrupt Enable Register
- */
-#define UART_IER_MSI	0x08	/* Enable Modem status interrupt */
-#define UART_IER_RLSI	0x04	/* Enable receiver line status interrupt */
-#define UART_IER_THRI	0x02	/* Enable Transmitter holding register int. */
-#define UART_IER_RDI	0x01	/* Enable receiver data interrupt */
-
-/*
- * These are the definitions for the Modem Control Register
- */
-#define UART_MCR_LOOP	0x10	/* Enable loopback test mode */
-#define UART_MCR_OUT2	0x08	/* Out2 complement */
-#define UART_MCR_OUT1	0x04	/* Out1 complement */
-#define UART_MCR_RTS	0x02	/* RTS complement */
-#define UART_MCR_DTR	0x01	/* DTR complement */
-
-/*
- * These are the definitions for the Modem Status Register
- */
-#define UART_MSR_DCD	0x80	/* Data Carrier Detect */
-#define UART_MSR_RI	0x40	/* Ring Indicator */
-#define UART_MSR_DSR	0x20	/* Data Set Ready */
-#define UART_MSR_CTS	0x10	/* Clear to Send */
-#define UART_MSR_DDCD	0x08	/* Delta DCD */
-#define UART_MSR_TERI	0x04	/* Trailing edge ring indicator */
-#define UART_MSR_DDSR	0x02	/* Delta DSR */
-#define UART_MSR_DCTS	0x01	/* Delta CTS */
-#define UART_MSR_ANY_DELTA 0x0F	/* Any of the delta bits! */
-
 #endif /* __LINUX_PS2MULT_H */