Initial revision

18 files changed, 5881 insertions, 0 deletions

diff --git a/board/ep8260/ep8260.c b/board/ep8260/ep8260.c
new file mode 100644
index 0000000..dc33edb
--- /dev/null
+++ b/board/ep8260/ep8260.c
@@ -0,0 +1,310 @@
+/*
+ * (C) Copyright 2001, 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2002
+ * Frank Panno <fpanno@delphintech.com>, Delphin Technology AG
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <ioports.h>
+#include <mpc8260.h>
+#include "ep8260.h"
+/*
+ * I/O Port configuration table
+ *
+ * if conf is 1, then that port pin will be configured at boot time
+ * according to the five values podr/pdir/ppar/psor/pdat for that entry
+ */
+
+const iop_conf_t iop_conf_tab[4][32] = {
+
+    /* Port A configuration */
+    {	/*	      conf ppar psor pdir podr pdat */
+	/* PA31 */ {   0,   0,   0,   1,   0,   0   }, /*  */
+	/* PA30 */ {   0,   0,   0,   1,   0,   0   }, /*  */
+	/* PA29 */ {   0,   0,   0,   1,   0,   0   }, /*  */
+	/* PA28 */ {   0,   0,   0,   1,   0,   0   }, /*  */
+	/* PA27 */ {   0,   0,   0,   1,   0,   0   }, /*  */
+	/* PA26 */ {   0,   0,   0,   1,   0,   0   }, /*  */
+	/* PA25 */ {   0,   0,   0,   1,   0,   0   }, /*  */
+	/* PA24 */ {   0,   0,   0,   1,   0,   0   }, /*  */
+	/* PA23 */ {   0,   0,   0,   1,   0,   0   }, /*  */
+	/* PA22 */ {   0,   0,   0,   1,   0,   0   }, /*  */
+	/* PA21 */ {   0,   0,   0,   1,   0,   0   }, /*  */
+	/* PA20 */ {   0,   0,   0,   1,   0,   0   }, /*  */
+	/* PA19 */ {   0,   0,   0,   1,   0,   0   }, /*  */
+	/* PA18 */ {   0,   0,   0,   1,   0,   0   }, /*  */
+	/* PA17 */ {   0,   0,   0,   1,   0,   0   }, /*  */
+	/* PA16 */ {   0,   0,   0,   1,   0,   0   }, /*  */
+	/* PA15 */ {   0,   0,   0,   1,   0,   0   }, /*  */
+	/* PA14 */ {   0,   0,   0,   1,   0,   0   }, /*  */
+	/* PA13 */ {   0,   0,   0,   1,   0,   0   }, /*  */
+	/* PA12 */ {   0,   0,   0,   1,   0,   0   }, /*  */
+	/* PA11 */ {   0,   0,   0,   1,   0,   0   }, /*  */
+	/* PA10 */ {   0,   0,   0,   1,   0,   0   }, /*  */
+	/* PA9  */ {   0,   1,   0,   1,   0,   0   }, /*  */
+	/* PA8  */ {   0,   1,   0,   0,   0,   0   }, /*  */
+	/* PA7  */ {   0,   0,   0,   1,   0,   0   }, /* PA7 */
+	/* PA6  */ {   0,   0,   0,   1,   0,   0   }, /* PA6 */
+	/* PA5  */ {   0,   0,   0,   1,   0,   0   }, /* PA5 */
+	/* PA4  */ {   0,   0,   0,   1,   0,   0   }, /* PA4 */
+	/* PA3  */ {   0,   0,   0,   1,   0,   0   }, /* PA3 */
+	/* PA2  */ {   0,   0,   0,   1,   0,   0   }, /* PA2 */
+	/* PA1  */ {   0,   0,   0,   1,   0,   0   }, /* PA1 */
+	/* PA0  */ {   0,   0,   0,   1,   0,   0   }  /* PA0 */
+    },
+
+    /* Port B configuration */
+    {   /*	      conf ppar psor pdir podr pdat */
+	/* PB31 */ {   0,   1,   0,   1,   0,   0   }, /*  */
+	/* PB30 */ {   0,   1,   0,   0,   0,   0   }, /*  */
+	/* PB29 */ {   0,   1,   1,   1,   0,   0   }, /*  */
+	/* PB28 */ {   0,   1,   0,   0,   0,   0   }, /*  */
+	/* PB27 */ {   0,   1,   0,   0,   0,   0   }, /*  */
+	/* PB26 */ {   0,   1,   0,   0,   0,   0   }, /*  */
+	/* PB25 */ {   0,   1,   0,   1,   0,   0   }, /*  */
+	/* PB24 */ {   0,   1,   0,   1,   0,   0   }, /*  */
+	/* PB23 */ {   0,   1,   0,   1,   0,   0   }, /*  */
+	/* PB22 */ {   0,   1,   0,   1,   0,   0   }, /*  */
+	/* PB21 */ {   0,   1,   0,   0,   0,   0   }, /*  */
+	/* PB20 */ {   0,   1,   0,   0,   0,   0   }, /*  */
+	/* PB19 */ {   0,   1,   0,   0,   0,   0   }, /*  */
+	/* PB18 */ {   0,   1,   0,   0,   0,   0   }, /*  */
+	/* PB17 */ {   1,   1,   0,   0,   0,   0   }, /* FCC3 MII RX_DV */
+	/* PB16 */ {   1,   1,   0,   0,   0,   0   }, /* FCC3 MII RX_ER */
+	/* PB15 */ {   1,   1,   0,   1,   0,   0   }, /* FCC3 MII TX_ER */
+	/* PB14 */ {   1,   1,   0,   1,   0,   0   }, /* FCC3 MII TX_EN */
+	/* PB13 */ {   1,   1,   0,   0,   0,   0   }, /* FCC3 MII COL */
+	/* PB12 */ {   1,   1,   0,   0,   0,   0   }, /* FCC3 MII CRS */
+	/* PB11 */ {   1,   1,   0,   0,   0,   0   }, /* FCC3 MII RxD[3] */
+	/* PB10 */ {   1,   1,   0,   0,   0,   0   }, /* FCC3 MII RxD[2] */
+	/* PB9  */ {   1,   1,   0,   0,   0,   0   }, /* FCC3 MII RxD[1] */
+	/* PB8  */ {   1,   1,   0,   0,   0,   0   }, /* FCC3 MII RxD[0] */
+	/* PB7  */ {   0,   0,   0,   0,   0,   0   }, /* PB7 */
+	/* PB6  */ {   1,   1,   0,   1,   0,   0   }, /* FCC3 MII TxD[1] */
+	/* PB5  */ {   1,   1,   0,   1,   0,   0   }, /* FCC3 MII TxD[2] */
+	/* PB4  */ {   1,   1,   0,   1,   0,   0   }, /* FCC3 MII TxD[3] */
+	/* PB3  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
+	/* PB2  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
+	/* PB1  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
+	/* PB0  */ {   0,   0,   0,   0,   0,   0   }  /* pin doesn't exist */
+    },
+
+    /* Port C */
+    {   /*	      conf ppar psor pdir podr pdat */
+	/* PC31 */ {   0,   0,   0,   1,   0,   0   }, /* PC31 */
+	/* PC30 */ {   0,   0,   0,   1,   0,   0   }, /* PC30 */
+	/* PC29 */ {   0,   1,   1,   0,   0,   0   }, /*  */
+	/* PC28 */ {   0,   0,   0,   1,   0,   0   }, /* PC28 */
+	/* PC27 */ {   1,   1,   0,   1,   0,   0   }, /* FCC3 MII TxD[0] */
+	/* PC26 */ {   0,   0,   0,   1,   0,   0   }, /* PC26 */
+	/* PC25 */ {   0,   0,   0,   1,   0,   0   }, /* PC25 */
+	/* PC24 */ {   0,   0,   0,   1,   0,   0   }, /* PC24 */
+	/* PC23 */ {   0,   1,   0,   1,   0,   0   }, /*  */
+	/* PC22 */ {   0,   1,   0,   0,   0,   0   }, /*  */
+	/* PC21 */ {   0,   1,   0,   0,   0,   0   }, /*  */
+	/* PC20 */ {   0,   1,   0,   0,   0,   0   }, /*  */
+	/* PC19 */ {   0,   1,   0,   0,   0,   0   }, /*  */
+	/* PC18 */ {   0,   1,   0,   0,   0,   0   }, /*  */
+	/* PC17 */ {   1,   1,   0,   0,   0,   0   }, /* FCC3 MII CLK15 */
+	/* PC16 */ {   1,   1,   0,   0,   0,   0   }, /* FCC3 MII CLK16 */
+	/* PC15 */ {   0,   0,   0,   1,   0,   0   }, /* PC15 */
+	/* PC14 */ {   0,   1,   0,   0,   0,   0   }, /*  */
+	/* PC13 */ {   0,   0,   0,   1,   0,   0   }, /* PC13 */
+	/* PC12 */ {   0,   0,   0,   1,   0,   0   }, /* PC12 */
+	/* PC11 */ {   0,   0,   0,   1,   0,   0   }, /* PC11 */
+	/* PC10 */ {   0,   0,   0,   1,   0,   0   }, /*  */
+	/* PC9  */ {   0,   0,   0,   1,   0,   0   }, /*  */
+	/* PC8  */ {   0,   0,   0,   1,   0,   0   }, /* PC8 */
+	/* PC7  */ {   0,   0,   0,   1,   0,   0   }, /* PC7 */
+	/* PC6  */ {   0,   0,   0,   1,   0,   0   }, /* PC6 */
+	/* PC5  */ {   0,   0,   0,   1,   0,   0   }, /* PC5 */
+	/* PC4  */ {   0,   0,   0,   1,   0,   0   }, /* PC4 */
+	/* PC3  */ {   0,   0,   0,   1,   0,   0   }, /* PC3 */
+	/* PC2  */ {   0,   0,   0,   1,   0,   1   }, /*  */
+	/* PC1  */ {   0,   0,   0,   1,   0,   0   }, /*  */
+	/* PC0  */ {   0,   0,   0,   1,   0,   0   }, /*  */
+    },
+
+    /* Port D */
+    {   /*	      conf ppar psor pdir podr pdat */
+	/* PD31 */ {   0,   1,   0,   0,   0,   0   }, /*  */
+	/* PD30 */ {   0,   1,   1,   1,   0,   0   }, /*  */
+	/* PD29 */ {   0,   1,   0,   1,   0,   0   }, /*  */
+	/* PD28 */ {   0,   0,   0,   1,   0,   0   }, /* PD28 */
+	/* PD27 */ {   0,   0,   0,   1,   0,   0   }, /* PD27 */
+	/* PD26 */ {   0,   0,   0,   1,   0,   0   }, /* PD26 */
+	/* PD25 */ {   0,   0,   0,   1,   0,   0   }, /* PD25 */
+	/* PD24 */ {   0,   0,   0,   1,   0,   0   }, /* PD24 */
+	/* PD23 */ {   0,   0,   0,   1,   0,   0   }, /* PD23 */
+	/* PD22 */ {   0,   0,   0,   1,   0,   0   }, /* PD22 */
+	/* PD21 */ {   0,   0,   0,   1,   0,   0   }, /* PD21 */
+	/* PD20 */ {   0,   0,   0,   1,   0,   0   }, /* PD20 */
+	/* PD19 */ {   0,   0,   0,   1,   0,   0   }, /* PD19 */
+	/* PD18 */ {   0,   0,   0,   1,   0,   0   }, /* PD19 */
+	/* PD17 */ {   0,   1,   0,   0,   0,   0   }, /*  */
+	/* PD16 */ {   0,   1,   0,   1,   0,   0   }, /*  */
+	/* PD15 */ {   1,   1,   1,   0,   1,   0   }, /* I2C SDA */
+	/* PD14 */ {   1,   1,   1,   0,   1,   0   }, /* I2C SCL */
+	/* PD13 */ {   0,   0,   0,   0,   0,   0   }, /* PD13 */
+	/* PD12 */ {   0,   0,   0,   0,   0,   0   }, /* PD12 */
+	/* PD11 */ {   0,   0,   0,   0,   0,   0   }, /* PD11 */
+	/* PD10 */ {   0,   0,   0,   0,   0,   0   }, /* PD10 */
+	/* PD9  */ {   1,   1,   0,   1,   0,   0   }, /* SMC1 TXD */
+	/* PD8  */ {   1,   1,   0,   0,   0,   0   }, /* SMC1 RXD */
+	/* PD7  */ {   0,   0,   0,   1,   0,   1   }, /* PD7 */
+	/* PD6  */ {   0,   0,   0,   1,   0,   1   }, /* PD6 */
+	/* PD5  */ {   0,   0,   0,   1,   0,   1   }, /* PD5 */
+	/* PD4  */ {   0,   0,   0,   1,   0,   1   }, /* PD4 */
+	/* PD3  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
+	/* PD2  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
+	/* PD1  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
+	/* PD0  */ {   0,   0,   0,   0,   0,   0   }  /* pin doesn't exist */
+    }
+};
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * Setup CS4 to enable the Board Control/Status registers.
+ * Otherwise the smcs won't work.
+*/
+int board_pre_init (void)
+{
+    volatile t_ep_regs *regs = (t_ep_regs*)CFG_REGS_BASE;
+    volatile immap_t *immap  = (immap_t *)CFG_IMMR;
+    volatile memctl8260_t *memctl = &immap->im_memctl;
+    memctl->memc_br4 = CFG_BR4_PRELIM;
+    memctl->memc_or4 = CFG_OR4_PRELIM;
+    regs->bcsr1 = 0x62; /* to enable terminal on SMC1 */
+    regs->bcsr2 = 0x30;	/* enable NVRAM and writing FLASH */
+    return 0;
+}
+
+void
+reset_phy(void)
+{
+    volatile t_ep_regs *regs = (t_ep_regs*)CFG_REGS_BASE;
+    regs->bcsr4 = 0xC0;
+}
+
+/*
+ * Check Board Identity:
+ * I don' know, how the next board revisions will be coded.
+ * Thats why its a static interpretation ...
+*/
+
+int
+checkboard(void)
+{
+	volatile t_ep_regs *regs = (t_ep_regs*)CFG_REGS_BASE;
+	uint major=0, minor=0;
+	switch (regs->bcsr0) {
+		case 0x02: major = 1; break;
+		case 0x03: major = 1; minor = 1; break;
+		default: break;
+	}
+	printf ("Board: Embedded Planet EP8260, Revision %d.%d\n",
+		major, minor);
+	return 0;
+}
+
+
+/* ------------------------------------------------------------------------- */
+
+
+long int
+initdram(int board_type)
+{
+	volatile immap_t *immap  = (immap_t *)CFG_IMMR;
+	volatile memctl8260_t *memctl = &immap->im_memctl;
+	volatile uchar c = 0;
+	volatile uchar *ramaddr = (uchar *)(CFG_SDRAM_BASE) + 0x110;
+/*
+	ulong psdmr = CFG_PSDMR;
+#ifdef CFG_LSDRAM
+	ulong lsdmr = CFG_LSDMR;
+#endif
+*/
+	long size = CFG_SDRAM0_SIZE;
+	int i;
+
+
+/*
+* Quote from 8260 UM (10.4.2 SDRAM Power-On Initialization, 10-35):
+*
+* "At system reset, initialization software must set up the
+*  programmable parameters in the memory controller banks registers
+*  (ORx, BRx, P/LSDMR). After all memory parameters are configured,
+*  system software should execute the following initialization sequence
+*  for each SDRAM device.
+*
+*  1. Issue a PRECHARGE-ALL-BANKS command
+*  2. Issue eight CBR REFRESH commands
+*  3. Issue a MODE-SET command to initialize the mode register
+*
+*  The initial commands are executed by setting P/LSDMR[OP] and
+*  accessing the SDRAM with a single-byte transaction."
+*
+* The appropriate BRx/ORx registers have already been set when we
+* get here. The SDRAM can be accessed at the address CFG_SDRAM_BASE.
+*/
+
+	memctl->memc_psrt = CFG_PSRT;
+	memctl->memc_mptpr = CFG_MPTPR;
+
+	memctl->memc_psdmr = (ulong) CFG_PSDMR | PSDMR_OP_PREA;
+	*ramaddr = c;
+
+	memctl->memc_psdmr = (ulong) CFG_PSDMR | PSDMR_OP_CBRR;
+	for (i = 0; i < 8; i++)
+		*ramaddr = c;
+
+	memctl->memc_psdmr = (ulong) CFG_PSDMR | PSDMR_OP_MRW;
+	*ramaddr = c;
+
+	memctl->memc_psdmr = (ulong) CFG_PSDMR | PSDMR_OP_NORM | PSDMR_RFEN;
+	*ramaddr = c;
+
+#ifndef CFG_RAMBOOT
+#ifdef CFG_LSDRAM
+	size += CFG_SDRAM1_SIZE;
+	ramaddr = (uchar *)(CFG_SDRAM1_BASE) + 0x8c;
+	memctl->memc_lsrt = CFG_LSRT;
+
+	memctl->memc_lsdmr = (ulong) CFG_LSDMR | PSDMR_OP_PREA;
+	*ramaddr = c;
+
+	memctl->memc_lsdmr = (ulong) CFG_LSDMR | PSDMR_OP_CBRR;
+	for (i = 0; i < 8; i++)
+		*ramaddr = c;
+
+	memctl->memc_lsdmr = (ulong) CFG_LSDMR | PSDMR_OP_MRW;
+	*ramaddr = c;
+
+	memctl->memc_lsdmr = (ulong) CFG_LSDMR | PSDMR_OP_NORM | PSDMR_RFEN;
+	*ramaddr = c;
+#endif /* CFG_LSDRAM */
+#endif /* CFG_RAMBOOT */
+	return (size * 1024 * 1024);
+}
+
diff --git a/board/eric/eric.c b/board/eric/eric.c
new file mode 100644
index 0000000..17fe6ac
--- /dev/null
+++ b/board/eric/eric.c
@@ -0,0 +1,195 @@
+/*
+ * (C) Copyright 2001
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <i2c.h>
+#include "eric.h"
+#include <asm/processor.h>
+
+#define IBM405GP_GPIO0_OR      0xef600700	/* GPIO Output */
+#define IBM405GP_GPIO0_TCR     0xef600704	/* GPIO Three-State Control */
+#define IBM405GP_GPIO0_ODR     0xef600718	/* GPIO Open Drain */
+#define IBM405GP_GPIO0_IR      0xef60071c	/* GPIO Input */
+
+int board_pre_init (void)
+{
+
+   /*-------------------------------------------------------------------------+
+   | Interrupt controller setup for the ERIC board.
+   | Note: IRQ 0-15  405GP internally generated; active high; level sensitive
+   |       IRQ 16    405GP internally generated; active low; level sensitive
+   |       IRQ 17-24 RESERVED
+   |       IRQ 25 (EXT IRQ 0) FLASH; active low; level sensitive
+   |       IRQ 26 (EXT IRQ 1) PHY ; active low; level sensitive
+   |       IRQ 27 (EXT IRQ 2) HOST FAIL, active low; level sensitive
+   |                          indicates NO Power or HOST RESET active
+   |                          check GPIO7 (HOST RESET#) and GPIO8 (NO Power#)
+   |                          for real IRQ source
+   |       IRQ 28 (EXT IRQ 3) HOST; active high; level sensitive
+   |       IRQ 29 (EXT IRQ 4) PCI INTC#; active low; level sensitive
+   |       IRQ 30 (EXT IRQ 5) PCI INTB#; active low; level sensitive
+   |       IRQ 31 (EXT IRQ 6) PCI INTA#; active low; level sensitive
+   |        -> IRQ6 Pin is NOW GPIO23 and can be activateted by setting
+   |           IBM405GP_GPIO0_TCR Bit 0 = 1 (driving the output as defined in IBM405GP_GPIO0_OR,
+   |           else tristate)
+   | Note for ERIC board:
+   |       An interrupt taken for the HOST (IRQ 28) indicates that
+   |       the HOST wrote a "1" to one of the following locations
+   |       - VGA CRT_GPIO0 (if R1216 is loaded)
+   |       - VGA CRT_GPIO1 (if R1217 is loaded)
+   |
+   +-------------------------------------------------------------------------*/
+
+	mtdcr (uicsr, 0xFFFFFFFF);	/* clear all ints */
+	mtdcr (uicer, 0x00000000);	/* disable all ints */
+	mtdcr (uiccr, 0x00000000);	/* set all SMI to be non-critical */
+	mtdcr (uicpr, 0xFFFFFF88);	/* set int polarities; IRQ3 to 1 */
+	mtdcr (uictr, 0x10000000);	/* set int trigger levels, UART0 is EDGE */
+	mtdcr (uicvcr, 0x00000001);	/* set vect base=0,INT0 highest priority */
+	mtdcr (uicsr, 0xFFFFFFFF);	/* clear all ints */
+
+	mtdcr (cntrl0, 0x00002000);	/* set IRQ6 as GPIO23 to generate an interrupt request to the PCP2PCI bridge */
+
+	out32 (IBM405GP_GPIO0_OR, 0x60000000);	/*fixme is SMB_INT high or low active??; IRQ6 is GPIO23 output */
+	out32 (IBM405GP_GPIO0_TCR, 0x7E400000);
+
+	return 0;
+}
+
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * Check Board Identity:
+ */
+
+int checkboard (void)
+{
+	unsigned char *s = getenv ("serial#");
+	unsigned char *e;
+
+	puts ("Board: ");
+
+	if (!s || strncmp (s, "ERIC", 9)) {
+		puts ("### No HW ID - assuming ERIC");
+	} else {
+		for (e = s; *e; ++e) {
+			if (*e == ' ')
+				break;
+		}
+
+		for (; s < e; ++s) {
+			putc (*s);
+		}
+	}
+
+
+	putc ('\n');
+
+	return (0);
+}
+
+
+/* ------------------------------------------------------------------------- */
+/* ------------------------------------------------------------------------- */
+/* ------------------------------------------------------------------------- */
+/*
+  initdram(int board_type) reads EEPROM via I2c. EEPROM contains all of
+  the necessary info for SDRAM controller configuration
+*/
+/* ------------------------------------------------------------------------- */
+/* ------------------------------------------------------------------------- */
+long int initdram (int board_type)
+{
+#ifndef CONFIG_ERIC
+	int i;
+	unsigned char datain[128];
+	int TotalSize;
+#endif
+
+
+#ifdef CONFIG_ERIC
+	/*
+	 * we have no EEPROM on ERIC
+	 * so let init.S do the init job for SDRAM
+	 * and simply return 32MByte here
+	 */
+	return (CFG_SDRAM_SIZE * 1024 * 1024);
+#else
+
+	/* Read Serial Presence Detect Information */
+	for (i = 0; i < 128; i++)
+		datain[i] = 127;
+	i2c_send (SPD_EEPROM_ADDRESS, 0, 1, datain, 128);
+	printf ("\nReading DIMM...\n");
+#if 0
+	for (i = 0; i < 128; i++) {
+		printf ("%d=0x%x ", i, datain[i]);
+		if (((i + 1) % 10) == 0)
+			printf ("\n");
+	}
+	printf ("\n");
+#endif
+
+  /*****************************/
+	/* Retrieve interesting data */
+  /*****************************/
+	/* size of a SDRAM bank */
+	/* Number of bytes per side / number of banks per side */
+	if (datain[31] == 0x08)
+		TotalSize = 32;
+	else if (datain[31] == 0x10)
+		TotalSize = 64;
+	else {
+		printf ("IIC READ ERROR!!!\n");
+		TotalSize = 32;
+	}
+
+	/* single-sided DIMM or double-sided DIMM? */
+	if (datain[5] != 1) {
+		/* double-sided DIMM => SDRAM banks 0..3 are valid */
+		printf ("double-sided DIMM\n");
+		TotalSize *= 2;
+	}
+	/* else single-sided DIMM => SDRAM bank 0 and bank 2 are valid */
+	else {
+		printf ("single-sided DIMM\n");
+	}
+
+
+	/* return size in Mb unit => *(1024*1024) */
+	return (TotalSize * 1024 * 1024);
+#endif
+}
+
+/* ------------------------------------------------------------------------- */
+
+int testdram (void)
+{
+	/* TODO: XXX XXX XXX */
+	printf ("test: xxx MB - ok\n");
+
+	return (0);
+}
+
+/* ------------------------------------------------------------------------- */
diff --git a/board/esd/adciop/adciop.c b/board/esd/adciop/adciop.c
new file mode 100644
index 0000000..0c12e98
--- /dev/null
+++ b/board/esd/adciop/adciop.c
@@ -0,0 +1,97 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include "adciop.h"
+
+/* ------------------------------------------------------------------------- */
+
+#define	_NOT_USED_	0xFFFFFFFF
+
+/* ------------------------------------------------------------------------- */
+
+
+int board_pre_init (void)
+{
+	/*
+	 * Set port pin in escc2 to keep living, and configure user led output
+	 */
+	*(unsigned char *) 0x2000033e = 0x77;	/* ESCC2: PCR bit3=pwr on, bit7=led out */
+	*(unsigned char *) 0x2000033c = 0x88;	/* ESCC2: PVR pwr on, led off */
+
+	/*
+	 * Init pci regs
+	 */
+	*(unsigned long *) 0x50000304 = 0x02900007;	/* enable mem/io/master bits */
+	*(unsigned long *) 0x500001b4 = 0x00000000;	/* disable pci interrupt output enable */
+	*(unsigned long *) 0x50000354 = 0x00c05800;	/* disable emun interrupt output enable */
+	*(unsigned long *) 0x50000344 = 0x00000000;	/* disable pme interrupt output enable */
+	*(unsigned long *) 0x50000310 = 0x00000000;	/* pcibar0 */
+	*(unsigned long *) 0x50000314 = 0x00000000;	/* pcibar1 */
+	*(unsigned long *) 0x50000318 = 0x00000000;	/* pcibar2 */
+
+	return 0;
+}
+
+
+/*
+ * Check Board Identity:
+ */
+
+int checkboard (void)
+{
+	unsigned char str[64];
+	int i = getenv_r ("serial#", str, sizeof (str));
+
+	puts ("Board: ");
+
+	if (!i || strncmp (str, "ADCIOP", 6)) {
+		puts ("### No HW ID - assuming ADCIOP\n");
+		return (1);
+	}
+
+	puts (str);
+
+	putc ('\n');
+
+	return 0;
+}
+
+/* ------------------------------------------------------------------------- */
+
+long int initdram (int board_type)
+{
+	return (16 * 1024 * 1024);
+}
+
+/* ------------------------------------------------------------------------- */
+
+int testdram (void)
+{
+	/* TODO: XXX XXX XXX */
+	printf ("test: 16 MB - ok\n");
+
+	return (0);
+}
+
+/* ------------------------------------------------------------------------- */
diff --git a/board/esd/dasa_sim/dasa_sim.c b/board/esd/dasa_sim/dasa_sim.c
new file mode 100644
index 0000000..c1b9093
--- /dev/null
+++ b/board/esd/dasa_sim/dasa_sim.c
@@ -0,0 +1,224 @@
+/*
+ * (C) Copyright 2001
+ * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include "dasa_sim.h"
+
+/* ------------------------------------------------------------------------- */
+
+#undef FPGA_DEBUG
+
+#define	_NOT_USED_	0xFFFFFFFF
+
+/* ------------------------------------------------------------------------- */
+
+/* fpga configuration data - generated by bit2inc */
+static unsigned char fpgadata[] = {
+#include "fpgadata.c"
+};
+
+#define FPGA_PRG_SLEEP         32	/* fpga program sleep-time */
+#define LOAD_LONG(a)           a
+
+
+/******************************************************************************
+ *
+ * sysFpgaBoot - Load fpga-image into fpga
+ *
+ */
+static int fpgaBoot (void)
+{
+	int i, j, index, len;
+	unsigned char b;
+	int imageSize;
+
+	imageSize = sizeof (fpgadata);
+
+	/* display infos on fpgaimage */
+	index = 15;
+	for (i = 0; i < 4; i++) {
+		len = fpgadata[index];
+		index += len + 3;
+	}
+
+	/* search for preamble 0xFF2X */
+	for (index = 0; index < imageSize - 1; index++) {
+		if ((fpgadata[index] == 0xff)
+			&& ((fpgadata[index + 1] & 0xf0) == 0x20))
+			break;
+	}
+
+	/* enable cs1 instead of user0... */
+	*(unsigned long *) 0x50000084 &= ~0x00000002;
+
+#ifdef FPGA_DEBUG
+	printf ("%s\n",
+			((in32 (0x50000084) & 0x00010000) == 0) ? "NOT DONE" : "DONE");
+#endif
+
+	/* init fpga by asserting and deasserting PROGRAM* (USER2)... */
+	*(unsigned long *) 0x50000084 &= ~0x00000400;
+	udelay (FPGA_PRG_SLEEP * 1000);
+
+	*(unsigned long *) 0x50000084 |= 0x00000400;
+	udelay (FPGA_PRG_SLEEP * 1000);
+
+#ifdef FPGA_DEBUG
+	printf ("%s\n",
+			((in32 (0x50000084) & 0x00010000) == 0) ? "NOT DONE" : "DONE");
+#endif
+
+	/* cs1: disable burst, disable ready */
+	*(unsigned long *) 0x50000114 &= ~0x00000300;
+
+	/* cs1: set write timing */
+	*(unsigned long *) 0x50000118 |= 0x00010900;
+
+	/* write configuration-data into fpga... */
+	for (i = index; i < imageSize; i++) {
+		b = fpgadata[i];
+		for (j = 0; j < 8; j++) {
+			*(unsigned long *) 0x30000000 =
+				((b & 0x80) == 0x80)
+				? LOAD_LONG (0x03030101)
+				: LOAD_LONG (0x02020000);
+			b <<= 1;
+		}
+	}
+
+#ifdef FPGA_DEBUG
+	printf ("%s\n",
+			((in32 (0x50000084) & 0x00010000) == 0) ? "NOT DONE" : "DONE");
+#endif
+
+	/* set cs1 to 32 bit data-width, disable burst, enable ready */
+	*(unsigned long *) 0x50000114 |= 0x00000202;
+	*(unsigned long *) 0x50000114 &= ~0x00000100;
+
+	/* cs1: set iop access to little endian */
+	*(unsigned long *) 0x50000114 &= ~0x00000010;
+
+	/* cs1: set read and write timing */
+	*(unsigned long *) 0x50000118 = 0x00010000;
+	*(unsigned long *) 0x5000011c = 0x00010001;
+
+#ifdef FPGA_DEBUG
+	printf ("%s\n",
+			((in32 (0x50000084) & 0x00010000) == 0) ? "NOT DONE" : "DONE");
+#endif
+
+	/* wait for 30 ms... */
+	udelay (30 * 1000);
+	/* check if fpga's DONE signal - correctly booted ? */
+	if ((*(unsigned long *) 0x50000084 & 0x00010000) == 0)
+		return -1;
+
+	return 0;
+}
+
+
+int board_pre_init (void)
+{
+	/*
+	 * Init pci regs
+	 */
+	*(unsigned long *) 0x50000304 = 0x02900007;	/* enable mem/io/master bits */
+	*(unsigned long *) 0x500001b4 = 0x00000000;	/* disable pci interrupt output enable */
+	*(unsigned long *) 0x50000354 = 0x00c05800;	/* disable emun interrupt output enable */
+	*(unsigned long *) 0x50000344 = 0x00000000;	/* disable pme interrupt output enable */
+	*(unsigned long *) 0x50000310 = 0x00000000;	/* pcibar0 */
+	*(unsigned long *) 0x50000314 = 0x00000000;	/* pcibar1 */
+	*(unsigned long *) 0x50000318 = 0x00000000;	/* pcibar2 */
+
+	return 0;
+}
+
+
+/*
+ * Check Board Identity:
+ */
+
+int checkboard (void)
+{
+	int index;
+	int len;
+	unsigned char str[64];
+	int i = getenv_r ("serial#", str, sizeof (str));
+	int fpga;
+	unsigned short val;
+
+	puts ("Board: ");
+
+	/*
+	 * Boot onboard FPGA
+	 */
+	fpga = fpgaBoot ();
+
+	if (!i || strncmp (str, "DASA_SIM", 8)) {
+		puts ("### No HW ID - assuming DASA_SIM");
+	}
+
+	puts (str);
+
+	if (fpga == 0) {
+		val = *(unsigned short *) 0x30000202;
+		printf (" (Id=%d Version=%d Revision=%d)",
+			(val & 0x07f8) >> 3, val & 0x0001, (val & 0x0006) >> 1);
+
+		puts ("\nFPGA:  ");
+
+		/* display infos on fpgaimage */
+		index = 15;
+		for (i = 0; i < 4; i++) {
+			len = fpgadata[index];
+			printf ("%s ", &(fpgadata[index + 1]));
+			index += len + 3;
+		}
+	} else {
+		puts ("\nFPGA:  Booting failed!");
+	}
+
+	putc ('\n');
+
+	return 0;
+}
+
+
+/* ------------------------------------------------------------------------- */
+
+long int initdram (int board_type)
+{
+	return (16 * 1024 * 1024);
+}
+
+/* ------------------------------------------------------------------------- */
+
+int testdram (void)
+{
+	/* TODO: XXX XXX XXX */
+	printf ("test: 16 MB - ok\n");
+
+	return (0);
+}
+
+/* ------------------------------------------------------------------------- */
diff --git a/board/esd/ocrtc/ocrtc.c b/board/esd/ocrtc/ocrtc.c
new file mode 100644
index 0000000..3c3d56e
--- /dev/null
+++ b/board/esd/ocrtc/ocrtc.c
@@ -0,0 +1,127 @@
+/*
+ * (C) Copyright 2001
+ * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include "ocrtc.h"
+#include <asm/processor.h>
+#include <i2c.h>
+#include <command.h>
+#include <cmd_boot.h>
+
+/* ------------------------------------------------------------------------- */
+
+int board_pre_init (void)
+{
+	/*
+	 * IRQ 0-15  405GP internally generated; active high; level sensitive
+	 * IRQ 16    405GP internally generated; active low; level sensitive
+	 * IRQ 17-24 RESERVED
+	 * IRQ 25 (EXT IRQ 0) CAN0; active low; level sensitive
+	 * IRQ 26 (EXT IRQ 1) CAN1; active low; level sensitive
+	 * IRQ 27 (EXT IRQ 2) PCI SLOT 0; active low; level sensitive
+	 * IRQ 28 (EXT IRQ 3) PCI SLOT 1; active low; level sensitive
+	 * IRQ 29 (EXT IRQ 4) PCI SLOT 2; active low; level sensitive
+	 * IRQ 30 (EXT IRQ 5) PCI SLOT 3; active low; level sensitive
+	 * IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive
+	 */
+	mtdcr (uicsr, 0xFFFFFFFF);	/* clear all ints */
+	mtdcr (uicer, 0x00000000);	/* disable all ints */
+	mtdcr (uiccr, 0x00000000);	/* set all to be non-critical */
+	mtdcr (uicpr, 0xFFFFFF81);	/* set int polarities */
+	mtdcr (uictr, 0x10000000);	/* set int trigger levels */
+	mtdcr (uicvcr, 0x00000001);	/* set vect base=0,INT0 highest priority */
+	mtdcr (uicsr, 0xFFFFFFFF);	/* clear all ints */
+
+	/*
+	 * EBC Configuration Register: clear EBTC -> high-Z ebc signals between
+	 * transfers, set device-paced timeout to 256 cycles
+	 */
+	mtebc (epcr, 0x20400000);
+
+	return 0;
+}
+
+
+/* ------------------------------------------------------------------------- */
+
+int misc_init_f (void)
+{
+	return 0;					/* dummy implementation */
+}
+
+
+/*
+ * Check Board Identity:
+ */
+
+int checkboard (void)
+{
+	unsigned char str[64];
+	int i = getenv_r ("serial#", str, sizeof (str));
+
+	puts ("Board: ");
+
+	if (i == -1) {
+#ifdef CONFIG_OCRTC
+		puts ("### No HW ID - assuming OCRTC");
+#endif
+#ifdef CONFIG_ORSG
+		puts ("### No HW ID - assuming ORSG");
+#endif
+	} else {
+		puts (str);
+	}
+
+	putc ('\n');
+
+	return (0);
+}
+
+/* ------------------------------------------------------------------------- */
+
+long int initdram (int board_type)
+{
+	unsigned long val;
+
+	mtdcr (memcfga, mem_mb0cf);
+	val = mfdcr (memcfgd);
+
+#if 0
+	printf ("\nmb0cf=%x\n", val);	/* test-only */
+	printf ("strap=%x\n", mfdcr (strap));	/* test-only */
+#endif
+
+	return (4 * 1024 * 1024 << ((val & 0x000e0000) >> 17));
+}
+
+/* ------------------------------------------------------------------------- */
+
+int testdram (void)
+{
+	/* TODO: XXX XXX XXX */
+	printf ("test: 16 MB - ok\n");
+
+	return (0);
+}
+
+/* ------------------------------------------------------------------------- */
diff --git a/board/esteem192e/esteem192e.c b/board/esteem192e/esteem192e.c
new file mode 100644
index 0000000..792a61c
--- /dev/null
+++ b/board/esteem192e/esteem192e.c
@@ -0,0 +1,318 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ *
+ * Modified By Conn Clark to work with Esteem 192E 7/31/00
+ *
+ */
+
+#include <common.h>
+#include <mpc8xx.h>
+
+/* ------------------------------------------------------------------------- */
+
+static long int dram_size ( long int *base, long int maxsize);
+
+/* ------------------------------------------------------------------------- */
+
+#define	_NOT_USED_	0xFFFFFFFF
+
+const uint sdram_table[] =
+{
+	/*
+	 * Single Read. (Offset 0 in UPMA RAM)
+	 *
+	 * active, NOP, read, precharge, NOP */
+	0x0F27CC04, 0x0EAECC04, 0x00B98C04, 0x00F74C00,
+	0x11FFCC05, /* last */
+	/*
+	 * SDRAM Initialization (offset 5 in UPMA RAM)
+	 *
+         * This is no UPM entry point. The following definition uses
+         * the remaining space to establish an initialization
+         * sequence, which is executed by a RUN command.
+	 * NOP, Program
+	 */
+        0x0F0A8C34, 0x1F354C37, /* last */
+
+        _NOT_USED_,  /* Not used */
+
+	/*
+	 * Burst Read. (Offset 8 in UPMA RAM)
+	 * active, NOP, read, NOP, NOP, NOP, NOP, NOP */
+	0x0F37CC04, 0x0EFECC04, 0x00FDCC04, 0x00FFCC00,
+	0x00FFCC00, 0x01FFCC00, 0x0FFFCC00, 0x1FFFCC05, /* last */
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	/*
+	 * Single Write. (Offset 18 in UPMA RAM)
+	 * active, NOP, write, NOP, precharge, NOP */
+	0x0F27CC04, 0x0EAE8C00, 0x01BD4C04, 0x0FFB8C04,
+	0x0FF74C04, 0x1FFFCC05, /* last */
+	_NOT_USED_, _NOT_USED_,
+	/*
+	 * Burst Write. (Offset 20 in UPMA RAM)
+	 * active, NOP, write, NOP, NOP, NOP, NOP, NOP */
+	0x0F37CC04, 0x0EFE8C00, 0x00FD4C00, 0x00FFCC00,
+	0x00FFCC00, 0x01FFCC04, 0x0FFFCC04, 0x1FFFCC05, /* last */
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	/*
+	 * Refresh  (Offset 30 in UPMA RAM)
+	 * precharge, NOP, auto_ref, NOP, NOP, NOP */
+	0x0FF74C34, 0x0FFACCB4, 0x0FF5CC34, 0x0FFFCC34,
+	0x0FFFCCB4, 0x1FFFCC35, /* last */
+				_NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	/*
+	 * Exception. (Offset 3c in UPMA RAM)
+	 */
+	0x0FFB8C00, 0x1FF74C03, /* last */
+	                        _NOT_USED_, _NOT_USED_
+};
+
+/* ------------------------------------------------------------------------- */
+
+
+/*
+ * Check Board Identity:
+ */
+
+int checkboard (void)
+{
+    puts ("Board: Esteem 192E\n");
+    return(0);
+}
+
+/* ------------------------------------------------------------------------- */
+
+
+long int initdram (int board_type)
+{
+    volatile immap_t     *immap  = (immap_t *)CFG_IMMR;
+    volatile memctl8xx_t *memctl = &immap->im_memctl;
+    long int size_b0, size_b1;
+
+    /*
+     * Explain frequency of refresh here
+     */
+
+    memctl->memc_mptpr = 0x0200; /* divide by 32 */
+
+    memctl->memc_mamr = 0x18003112; /*CFG_MAMR_8COL;*/ /* 0x18005112 TODO: explain here */
+
+    upmconfig(UPMA, (uint *)sdram_table, sizeof(sdram_table)/sizeof(uint));
+
+    /*
+     * Map cs 2 and 3 to the SDRAM banks 0 and 1 at
+     * preliminary addresses - these have to be modified after the
+     * SDRAM size has been determined.
+     */
+
+    memctl->memc_or2 = CFG_OR2_PRELIM; /* not defined yet */
+    memctl->memc_br2 = CFG_BR2_PRELIM;
+
+    memctl->memc_or3 = CFG_OR3_PRELIM;
+    memctl->memc_br3 = CFG_BR3_PRELIM;
+
+
+    /* perform SDRAM initializsation sequence */
+    memctl->memc_mar  = 0x00000088;
+
+    memctl->memc_mcr  = 0x80004830;	/* SDRAM bank 0 execute 8 refresh */
+
+    memctl->memc_mcr  = 0x80004105; 	/* SDRAM bank 0 */
+
+
+    memctl->memc_mcr  = 0x80006830;	/* SDRAM bank 1 execute 8 refresh */
+
+    memctl->memc_mcr  = 0x80006105;	/* SDRAM bank 1 */
+
+
+    memctl->memc_mamr = CFG_MAMR_8COL; /* 0x18803112  start refresh timer TODO: explain here */
+
+/* printf ("banks 0 and 1 are programed\n"); */
+
+    /*
+     * Check Bank 0 Memory Size for re-configuration
+     *
+     */
+
+    size_b0 = dram_size ((ulong *)SDRAM_BASE2_PRELIM, SDRAM_MAX_SIZE);
+
+    size_b1 = dram_size ((ulong *)SDRAM_BASE3_PRELIM, SDRAM_MAX_SIZE);
+
+
+ printf ("\nbank 0 size %lu\nbank 1 size %lu\n",size_b0,size_b1);
+
+
+/* printf ("bank 1 size %u\n",size_b1); */
+
+    if(size_b1 == 0) {
+
+    /*
+     * Adjust refresh rate if bank 0 isn't stuffed
+     */
+
+       memctl->memc_mptpr = 0x0400; /* divide by 64 */
+       memctl->memc_br3 &= 0x0FFFFFFFE;
+
+    /*
+     * Adjust OR2 for size of bank 0
+     */
+       memctl->memc_or2 |= 7 * size_b0;
+
+    }
+
+    else {
+
+       if(size_b0 < size_b1) {
+          memctl->memc_br2 &= 0x00007FFE;
+          memctl->memc_br3 &= 0x00007FFF;
+
+         /*
+          * Adjust OR3 for size of bank 1
+          */
+          memctl->memc_or3 |= 15 * size_b1;
+
+         /*
+          * Adjust OR2 for size of bank 0
+          */
+          memctl->memc_or2 |= 15 * size_b0;
+
+          memctl->memc_br2 += (size_b1 + 1);
+
+       }
+       else {
+
+          memctl->memc_br3 &= 0x00007FFE;
+
+
+         /*
+          * Adjust OR2 for size of bank 0
+          */
+          memctl->memc_or2 |= 15 * size_b0;
+
+         /*
+          * Adjust OR3 for size of bank 1
+          */
+          memctl->memc_or3 |= 15 * size_b1;
+
+          memctl->memc_br3 += (size_b0 + 1);
+
+
+       }
+    }
+
+
+/* before leaving set all unused i/o pins to outputs */
+
+/*
+ *      --*Unused Pin List*--
+ *
+ * group/port           bit number
+ * IP_B                 0,1,3,4,5  Taken care of in pcmcia-cs-x.x.xx
+ * PA                   5,7,8,9,14,15
+ * PB                   22,23,31
+ * PC                   4,5,6,7,10,11,12,13,14,15
+ * PD                   5,6,7
+ *
+ */
+
+/*
+ *   --*Pin Used for I/O List*--
+ *
+ * port     input bit number    output bit number    either
+ * PB                           18,26,27
+ * PD       3,4                                      8,9,10,11,12,13,14,15
+ *
+ */
+
+
+    immap->im_ioport.iop_papar &= ~0x05C3;    /* set pins as io */
+    immap->im_ioport.iop_padir |= 0x05C3;     /* set pins as output */
+    immap->im_ioport.iop_paodr &= 0x0008;     /* config pins 9 & 14 as normal outputs */
+    immap->im_ioport.iop_padat |= 0x05C3;     /* set unused pins as high */
+
+    immap->im_cpm.cp_pbpar &= ~0x00001331; /* set unused port b pins as io */
+    immap->im_cpm.cp_pbdir |= 0x00001331;  /* set unused port b pins as output */
+    immap->im_cpm.cp_pbodr &= ~0x00001331; /* config bits 18,22,23,26,27 & 31 as normal outputs */
+    immap->im_cpm.cp_pbdat |= 0x00001331;  /* set T/E LED, /NV_CS, & /POWER_ADJ_CS and the rest to a high */
+
+    immap->im_ioport.iop_pcpar &= ~0x0F3F;    /* set unused port c pins as io */
+    immap->im_ioport.iop_pcdir |= 0x0F3F;     /* set unused port c pins as output */
+    immap->im_ioport.iop_pcso  &= ~0x0F3F;    /* clear special purpose bit for unused port c pins for clarity */
+    immap->im_ioport.iop_pcdat |= 0x0F3F;     /* set unused port c pins high*/
+
+    immap->im_ioport.iop_pdpar &= 0xE000;     /* set pins as io */
+    immap->im_ioport.iop_pddir &= 0xE000;     /* set bit 3 & 4 as inputs */
+    immap->im_ioport.iop_pddir |= 0x07FF;     /* set bits 5 - 15 as outputs */
+    immap->im_ioport.iop_pddat = 0x0055;      /* set alternating pattern on test port */
+
+
+
+
+    return (size_b0 + size_b1);
+}
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * Check memory range for valid RAM. A simple memory test determines
+ * the actually available RAM size between addresses `base' and
+ * `base + maxsize'. Some (not all) hardware errors are detected:
+ * - short between address lines
+ * - short between data lines
+ */
+
+static long int dram_size ( long int *base, long int maxsize)
+{
+
+    volatile long int	 *addr;
+    long int		  cnt, val;
+
+    for (cnt = maxsize/sizeof(long); cnt > 0; cnt >>= 1) {
+	addr = base + cnt;	/* pointer arith! */
+
+	*addr = ~cnt;
+    }
+
+    /* write 0 to base address */
+    addr = base;
+    *addr = 0;
+
+    /* check at base address */
+    if ((val = *addr) != 0) {
+	return (0);
+    }
+
+    for (cnt = 1; ; cnt <<= 1) {
+	addr = base + cnt;	/* pointer arith! */
+
+	val = *addr;
+
+	if (val != (~cnt)) {
+	    return (cnt * sizeof(long));
+	}
+    }
+    /* NOTREACHED */
+}
diff --git a/board/etx094/etx094.c b/board/etx094/etx094.c
new file mode 100644
index 0000000..d48772b
--- /dev/null
+++ b/board/etx094/etx094.c
@@ -0,0 +1,418 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc8xx.h>
+
+/* ------------------------------------------------------------------------- */
+
+static long int dram_size (long int, long int *, long int);
+static void read_hw_vers (void);
+
+/* ------------------------------------------------------------------------- */
+
+#define _NOT_USED_	0xFFFFFFFF
+
+const uint sdram_table[] = {
+
+	/* single read   (offset 0x00 in upm ram) */
+
+	0xEECEFC24, 0x100DFC24, 0xE02FBC04, 0x01AA7C04,
+	0x1FB5FC00, 0xFFFFFC05, _NOT_USED_, _NOT_USED_,
+
+	/* burst read    (offset 0x08 in upm ram) */
+
+	0xEECEFC24, 0x100DFC24, 0xE0FFBC04, 0x10FF7C04,
+	0xF0FFFC00, 0xF0FFFC00, 0xF0FFFC00, 0xFFFFFC00,
+	0xFFFFFC05, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+
+	/* single write  (offset 0x18 in upm ram) */
+
+	0xEECEFC24, 0x100DFC24, 0xE02BBC04, 0x01A27C00,
+	0xEFAAFC04, 0x1FB5FC05, _NOT_USED_, _NOT_USED_,
+
+	/* burst write   (offset 0x20 in upm ram) */
+
+	0xEECEFC24, 0x103DFC24, 0xE0FBBC00, 0x10F77C00,
+	0xF0FFFC00, 0xF0FFFC00, 0xF0FFFC04, 0xFFFFFC05,
+
+	/* init part1      (offset 0x28 in upm ram) */
+
+	0xEFFAFC3C, 0x1FF4FC34, 0xEFFCBC34, 0x1FFC3C34,
+	0xFFFC3C35, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+
+	/* refresh   (offset 0x30 in upm ram) */
+
+	0xEFFEBC0C, 0x1FFD7C04, 0xFFFFFC04, 0xFFFFFC05,
+
+	/* init part2     (offset 0x34 in upm ram) */
+
+	0xFFFEBC04, 0xEFFC3CB4, 0x1FFC3C34, 0xFFFC3C34,
+	0xFFFC3C34, 0xEFE83CB4, 0x1FB57C35, _NOT_USED_,
+
+	/* exception     (offset 0x3C in upm ram) */
+
+	0xFFFFFC05, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+
+};
+
+/* ------------------------------------------------------------------------- */
+
+
+/*
+ * Check Board Identity:
+ *
+ * Test ETX ID string (ETX_xxx...)
+ *
+ * Return 1 always.
+ */
+
+int checkboard (void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	unsigned char *s = getenv ("serial#");
+	unsigned char *e;
+
+	puts ("Board: ");
+
+#ifdef SB_ETX094
+	gd->board_type = 0; /* 0 = 2SDRAM-Device */
+#else
+	gd->board_type = 1; /* 1 = 1SDRAM-Device */
+#endif
+
+	if (!s || strncmp (s, "ETX_", 4)) {
+		puts ("### No HW ID - assuming ETX_094\n");
+		read_hw_vers ();
+		return (0);
+	}
+
+	for (e = s; *e; ++e) {
+		if (*e == ' ')
+			break;
+	}
+
+	for (; s < e; ++s) {
+		putc (*s);
+	}
+	putc ('\n');
+
+	read_hw_vers ();
+	return (0);
+}
+
+/* ------------------------------------------------------------------------- */
+
+long int initdram (int board_type)
+{
+	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile memctl8xx_t *memctl = &immap->im_memctl;
+	long int size_b0, size_b1, size8, size9;
+
+	upmconfig (UPMA, (uint *) sdram_table,
+			   sizeof (sdram_table) / sizeof (uint));
+
+	/*
+	 * Preliminary prescaler for refresh (depends on number of
+	 * banks): This value is selected for four cycles every 62.4 us
+	 * with two SDRAM banks or four cycles every 31.2 us with one
+	 * bank. It will be adjusted after memory sizing.
+	 */
+	memctl->memc_mptpr = CFG_MPTPR_1BK_4K;	/* MPTPR_PTP_DIV32 0x0200 */
+
+	/* A3(SDRAM)=0      => Bursttype = Sequential
+	 * A2-A0(SDRAM)=010 => Burst length = 4
+	 * A4-A6(SDRAM)=010 => CasLat=2
+	 */
+	memctl->memc_mar = 0x00000088;
+
+	/*
+	 * Map controller banks 2 and 3 to the SDRAM banks 2 and 3 at
+	 * preliminary addresses - these have to be modified after the
+	 * SDRAM size has been determined.
+	 */
+	memctl->memc_or2 = CFG_OR2_PRELIM;
+	memctl->memc_br2 = CFG_BR2_PRELIM;
+
+	if (board_type == 0) {	/* "L" type boards have only one bank SDRAM */
+		memctl->memc_or3 = CFG_OR3_PRELIM;
+		memctl->memc_br3 = CFG_BR3_PRELIM;
+	}
+
+	memctl->memc_mamr = CFG_MAMR_8COL & (~(MAMR_PTAE));	/* no refresh yet */
+
+	udelay (200);
+
+	/* perform SDRAM initializsation sequence */
+
+	memctl->memc_mcr = 0x80004128;	/* SDRAM bank 0 (CS2) - Init Part 1 */
+	memctl->memc_mcr = 0x80004734;	/* SDRAM bank 0 (CS2) - Init Part 2 */
+	udelay (1);
+
+	if (board_type == 0) {		/* "L" type boards have only one bank SDRAM */
+		memctl->memc_mcr = 0x80006128;	/* SDRAM bank 1 (CS3) - Init Part 1 */
+		memctl->memc_mcr = 0x80006734;	/* SDRAM bank 1 (CS3) - Init Part 2 */
+		udelay (1);
+	}
+
+	memctl->memc_mamr |= MAMR_PTAE;	/* enable refresh */
+
+	udelay (1000);
+
+	/*
+	 * Check Bank 0 Memory Size for re-configuration
+	 *
+	 * try 8 column mode
+	 */
+	size8 = dram_size (CFG_MAMR_8COL, (ulong *) SDRAM_BASE2_PRELIM,
+					   SDRAM_MAX_SIZE);
+
+	udelay (1000);
+
+	/*
+	 * try 9 column mode
+	 */
+	size9 = dram_size (CFG_MAMR_9COL, (ulong *) SDRAM_BASE2_PRELIM,
+					   SDRAM_MAX_SIZE);
+
+	if (size8 < size9) {		/* leave configuration at 9 columns */
+		size_b0 = size9;
+/*	debug ("SDRAM Bank 0 in 9 column mode: %ld MB\n", size >> 20);	*/
+	} else {					/* back to 8 columns            */
+		size_b0 = size8;
+		memctl->memc_mamr = CFG_MAMR_8COL;
+		udelay (500);
+/*	debug ("SDRAM Bank 0 in 8 column mode: %ld MB\n", size >> 20);	*/
+	}
+
+	if (board_type == 0) {		/* "L" type boards have only one bank SDRAM */
+		/*
+		 * Check Bank 1 Memory Size
+		 * use current column settings
+		 * [9 column SDRAM may also be used in 8 column mode,
+		 *  but then only half the real size will be used.]
+		 */
+		size_b1 =
+				dram_size (memctl->memc_mamr, (ulong *) SDRAM_BASE3_PRELIM,
+						   SDRAM_MAX_SIZE);
+/*	debug ("SDRAM Bank 1: %ld MB\n", size8 >> 20);	*/
+	} else {
+		size_b1 = 0;
+	}
+
+	udelay (1000);
+
+	/*
+	 * Adjust refresh rate depending on SDRAM type, both banks
+	 * For types > 128 MBit leave it at the current (fast) rate
+	 */
+	if ((size_b0 < 0x02000000) && (size_b1 < 0x02000000)) {
+		/* reduce to 15.6 us (62.4 us / quad) */
+		memctl->memc_mptpr = CFG_MPTPR_2BK_4K;	/*DIV16 */
+		udelay (1000);
+	}
+
+	/*
+	 * Final mapping: map bigger bank first
+	 */
+	if (size_b1 > size_b0) {	/* SDRAM Bank 1 is bigger - map first   */
+
+		memctl->memc_or3 = ((-size_b1) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM;
+		memctl->memc_br3 =
+			(CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
+
+		if (size_b0 > 0) {
+			/*
+			 * Position Bank 0 immediately above Bank 1
+			 */
+			memctl->memc_or2 =
+				((-size_b0) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM;
+			memctl->memc_br2 =
+				((CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V)
+				+ size_b1;
+		} else {
+			unsigned long reg;
+
+			/*
+			 * No bank 0
+			 *
+			 * invalidate bank
+			 */
+			memctl->memc_br2 = 0;
+
+			/* adjust refresh rate depending on SDRAM type, one bank */
+			reg = memctl->memc_mptpr;
+			reg >>= 1;	/* reduce to CFG_MPTPR_1BK_8K / _4K */
+			memctl->memc_mptpr = reg;
+		}
+
+	} else {			/* SDRAM Bank 0 is bigger - map first   */
+
+		memctl->memc_or2 = ((-size_b0) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM;
+		memctl->memc_br2 =
+				(CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
+
+		if (size_b1 > 0) {
+			/*
+			 * Position Bank 1 immediately above Bank 0
+			 */
+			memctl->memc_or3 =
+					((-size_b1) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM;
+			memctl->memc_br3 =
+					((CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V)
+					+ size_b0;
+		} else {
+			unsigned long reg;
+
+			/*
+			 * No bank 1
+			 *
+			 * invalidate bank
+			 */
+			memctl->memc_br3 = 0;
+
+			/* adjust refresh rate depending on SDRAM type, one bank */
+			reg = memctl->memc_mptpr;
+			reg >>= 1;	/* reduce to CFG_MPTPR_1BK_8K / _4K */
+			memctl->memc_mptpr = reg;
+		}
+	}
+
+	udelay (10000);
+
+	return (size_b0 + size_b1);
+}
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * Check memory range for valid RAM. A simple memory test determines
+ * the actually available RAM size between addresses `base' and
+ * `base + maxsize'. Some (not all) hardware errors are detected:
+ * - short between address lines
+ * - short between data lines
+ */
+
+static long int dram_size (long int mamr_value, long int *base,
+						   long int maxsize)
+{
+	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile memctl8xx_t *memctl = &immap->im_memctl;
+	volatile long int *addr;
+	ulong cnt, val;
+	ulong save[32];			/* to make test non-destructive */
+	unsigned char i = 0;
+
+	memctl->memc_mamr = mamr_value;
+
+	for (cnt = maxsize / sizeof (long); cnt > 0; cnt >>= 1) {
+		addr = base + cnt;	/* pointer arith! */
+
+		save[i++] = *addr;
+		*addr = ~cnt;
+	}
+
+	/* write 0 to base address */
+	addr = base;
+	save[i] = *addr;
+	*addr = 0;
+
+	/* check at base address */
+	if ((val = *addr) != 0) {
+		*addr = save[i];
+		return (0);
+	}
+
+	for (cnt = 1; cnt <= maxsize / sizeof (long); cnt <<= 1) {
+		addr = base + cnt;	/* pointer arith! */
+
+		val = *addr;
+		*addr = save[--i];
+
+		if (val != (~cnt)) {
+			return (cnt * sizeof (long));
+		}
+	}
+	return (maxsize);
+}
+
+/* ------------------------------------------------------------------------- */
+
+/* HW-ID Table (Bits: 2^9;2^7;2^5) */
+#define HW_ID_0 0x0000
+#define HW_ID_1 0x0020
+#define HW_ID_2 0x0080
+#define HW_ID_3 0x00a0
+#define HW_ID_4 0x0200
+#define HW_ID_5 0x0220
+#define HW_ID_6 0x0280
+#define HW_ID_7 0x02a0
+
+void read_hw_vers ()
+{
+	unsigned short rd_msk = 0x02A0;
+
+	/* HW-ID pin-definition */
+	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+
+	immr->im_ioport.iop_pddir &= ~(rd_msk);
+	immr->im_ioport.iop_pdpar &= ~(rd_msk);
+
+	/* debug printf("State of PD: %x\n",immr->im_ioport.iop_pddat); */
+
+	/* Check the HW-ID */
+	printf ("HW-Version: ");
+	switch (immr->im_ioport.iop_pddat & rd_msk) {
+	case HW_ID_0:
+		printf ("V0.1 - V0.3 / W97238-Q3162-A1-1-2\n");
+		break;
+	case HW_ID_1:
+		printf ("V0.9 / W50037-Q1-D6-1\n");
+		break;
+	case HW_ID_2:
+		printf ("NOT USED - assuming ID#2\n");
+		break;
+	case HW_ID_3:
+		printf ("NOT USED - assuming ID#3\n");
+		break;
+	case HW_ID_4:
+		printf ("NOT USED - assuming ID#4\n");
+		break;
+	case HW_ID_5:
+		printf ("NOT USED - assuming ID#5\n");
+		break;
+	case HW_ID_6:
+		printf ("NOT USED - assuming ID#6\n");
+		break;
+	case HW_ID_7:
+		printf ("NOT USED - assuming ID#7\n");
+		break;
+	default:
+		printf ("###Error###\n");
+		break;
+	}
+}
+
+/* ------------------------------------------------------------------------- */
diff --git a/board/flagadm/flagadm.c b/board/flagadm/flagadm.c
new file mode 100644
index 0000000..bfd1525
--- /dev/null
+++ b/board/flagadm/flagadm.c
@@ -0,0 +1,150 @@
+/*
+ * (C) Copyright 2001
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc8xx.h>
+
+#define	_NOT_USED_	0xFFFFFFFF
+
+/*Orginal table, GPL4 disabled*/
+const uint sdram_table[] =
+{
+	/* single read   (offset 0x00 in upm ram) */
+	0x1f07cc04, 0xeeaeec04, 0x11adcc04, 0xefbbac00,
+	0x1ff74c47,
+	/* Precharge */
+	0x1FF74C05,
+	_NOT_USED_,
+	_NOT_USED_,
+	/* burst read    (offset 0x08 in upm ram) */
+	0x1f07cc04, 0xeeaeec04, 0x00adcc04, 0x00afcc00,
+	0x00afcc00, 0x01afcc00, 0x0fbb8c00, 0x1ff74c47,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	/* single write  (offset 0x18 in upm ram) */
+	0x1f27cc04, 0xeeaeac00, 0x01b90c04, 0x1ff74c47,
+	/* Load moderegister */
+	0x1FF74C34, /*Precharge*/
+	0xEFEA8C34, /*NOP*/
+	0x1FB54C35, /*Load moderegister*/
+	_NOT_USED_,
+
+	/* burst write   (offset 0x20 in upm ram) */
+	0x1f07cc04, 0xeeaeac00, 0x00ad4c00, 0x00afcc00,
+	0x00afcc00, 0x01bb8c04, 0x1ff74c47, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	/* refresh       (offset 0x30 in upm ram) */
+	0x1ff5cc84, 0xffffec04, 0xffffec04, 0xffffec04,
+	0xffffec84, 0xffffec07, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	/* exception     (offset 0x3C in upm ram) */
+	0x7fffec07, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+};
+
+/* GPL5 driven every cycle */
+/* the display and the DSP */
+const uint dsp_disp_table[] =
+{
+	/* single read   (offset 0x00 in upm ram) */
+	0xffffc80c, 0xffffc004, 0x0fffc004, 0x0fffd004,
+	0x0fffc000, 0x0fffc004, 0x3fffc004, 0xffffcc05,
+	/* burst read    (offset 0x08 in upm ram) */
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	/* single write  (offset 0x18 in upm ram) */
+	0xffffcc0c, 0xffffc004, 0x0fffc004, 0x0fffd004,
+	0x0fffc000, 0x0fffc004, 0x7fffc004, 0xfffffc05,
+	/* burst write   (offset 0x20 in upm ram) */
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	/* refresh       (offset 0x30 in upm ram) */
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	/* exception     (offset 0x3C in upm ram) */
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+};
+
+int checkboard (void)
+{
+	puts ("Board: FlagaDM V3.0\n");
+	return 0;
+}
+
+long int initdram (int board_type)
+{
+	volatile immap_t     *immap  = (immap_t *)CFG_IMMR;
+	volatile memctl8xx_t *memctl = &immap->im_memctl;
+	long int size_b0;
+
+	memctl->memc_or2 = CFG_OR2;
+	memctl->memc_br2 = CFG_BR2;
+
+	udelay(100);
+	upmconfig(UPMA, (uint *)sdram_table, sizeof(sdram_table)/sizeof(uint));
+
+	memctl->memc_mptpr = MPTPR_PTP_DIV16;
+	memctl->memc_mamr = CFG_MAMR_48_SDR | MAMR_TLFA_1X;
+
+	/*Do the initialization of the SDRAM*/
+	/*Start with the precharge cycle*/
+	memctl->memc_mcr = (MCR_OP_RUN | MCR_UPM_A | MCR_MB_CS2 | \
+				MCR_MLCF(1) | MCR_MAD(0x5));
+
+	/*Then we need two refresh cycles*/
+	memctl->memc_mamr = CFG_MAMR_48_SDR | MAMR_TLFA_2X;
+	memctl->memc_mcr = (MCR_OP_RUN | MCR_UPM_A | MCR_MB_CS2 | \
+				MCR_MLCF(2) | MCR_MAD(0x30));
+
+	/*Mode register programming*/
+	memctl->memc_mar = 0x00000088; /*CAS Latency = 2 and burst length = 4*/
+	memctl->memc_mcr = (MCR_OP_RUN | MCR_UPM_A | MCR_MB_CS2 | \
+				MCR_MLCF(1) | MCR_MAD(0x1C));
+
+	/* That should do it, just enable the periodic refresh in burst of 4*/
+	memctl->memc_mamr = CFG_MAMR_48_SDR | MAMR_TLFA_4X;
+	memctl->memc_mamr |= (MAMR_PTAE | MAMR_GPL_B4DIS);
+
+	size_b0 = 16*1024*1024;
+
+	/*
+	 * No bank 1 or 3
+	 * invalidate bank
+	 */
+	memctl->memc_br1 = 0;
+	memctl->memc_br3 = 0;
+
+	upmconfig(UPMB, (uint *)dsp_disp_table, sizeof(dsp_disp_table)/sizeof(uint));
+
+	memctl->memc_mbmr = MAMR_GPL_B4DIS;
+
+	memctl->memc_or4 = CFG_OR4;
+	memctl->memc_br4 = CFG_BR4;
+
+	return (size_b0);
+}
diff --git a/board/gth/gth.c b/board/gth/gth.c
new file mode 100644
index 0000000..94e7a65
--- /dev/null
+++ b/board/gth/gth.c
@@ -0,0 +1,595 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * Adapted from FADS and other board config files to GTH by thomas@corelatus.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <config.h>
+#include <watchdog.h>
+#include <mpc8xx.h>
+#include "ee_access.h"
+#include "ee_dev.h"
+
+#ifdef CONFIG_BDM
+#undef printf
+#define printf(a,...)			/* nothing */
+#endif
+
+
+int checkboard (void)
+{
+	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	int Id = 0;
+	int Rev = 0;
+	u32 Pbdat;
+
+	puts ("Board: ");
+
+	/* Turn on leds and setup for reading rev and id */
+
+#define PB_OUTS (PB_BLUE_LED|PB_ID_GND)
+#define PB_INS  (PB_ID_0|PB_ID_1|PB_ID_2|PB_ID_3|PB_REV_1|PB_REV_0)
+
+	immap->im_cpm.cp_pbpar &= ~(PB_OUTS | PB_INS);
+
+	immap->im_cpm.cp_pbdir &= ~PB_INS;
+
+	immap->im_cpm.cp_pbdir |= PB_OUTS;
+	immap->im_cpm.cp_pbodr |= PB_OUTS;
+	immap->im_cpm.cp_pbdat &= ~PB_OUTS;
+
+	/* Hold 100 Mbit in reset until fpga is loaded */
+	immap->im_ioport.iop_pcpar &= ~PC_ENET100_RESET;
+	immap->im_ioport.iop_pcdir |= PC_ENET100_RESET;
+	immap->im_ioport.iop_pcso &= ~PC_ENET100_RESET;
+	immap->im_ioport.iop_pcdat &= ~PC_ENET100_RESET;
+
+	/* Turn on front led to show that we are alive */
+	immap->im_ioport.iop_papar &= ~PA_FRONT_LED;
+	immap->im_ioport.iop_padir |= PA_FRONT_LED;
+	immap->im_ioport.iop_paodr |= PA_FRONT_LED;
+	immap->im_ioport.iop_padat &= ~PA_FRONT_LED;
+
+	Pbdat = immap->im_cpm.cp_pbdat;
+
+	if (!(Pbdat & PB_ID_0))
+		Id += 1;
+	if (!(Pbdat & PB_ID_1))
+		Id += 2;
+	if (!(Pbdat & PB_ID_2))
+		Id += 4;
+	if (!(Pbdat & PB_ID_3))
+		Id += 8;
+
+	if (Pbdat & PB_REV_0)
+		Rev += 1;
+	if (Pbdat & PB_REV_1)
+		Rev += 2;
+
+	/* Turn ID off since we dont need it anymore */
+	immap->im_cpm.cp_pbdat |= PB_ID_GND;
+
+	printf ("GTH board, rev %d, id=0x%01x\n", Rev, Id);
+	return 0;
+}
+
+#define _NOT_USED_ 0xffffffff
+const uint sdram_table[] = {
+	/* Single read, offset 0 */
+	0x0f3dfc04, 0x0eefbc04, 0x01bf7c04, 0x0feafc00,
+	0x1fb5fc45, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+
+	/* Burst read, Offset 0x8, 4 reads */
+	0x0f3dfc04, 0x0eefbc04, 0x00bf7c04, 0x00ffec00,
+	0x00fffc00, 0x01eafc00, 0x1fb5fc00, 0xfffffc45,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+
+	/* Not used part of burst read is used for MRS, Offset 0x14 */
+	0xefeabc34, 0x1fb57c34, 0xfffffc05, _NOT_USED_,
+	/* _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, */
+
+	/* Single write, Offset 0x18 */
+	0x0f3dfc04, 0x0eebbc00, 0x01a27c04, 0x1fb5fc45,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+
+	/* Burst write, Offset 0x20. 4 writes */
+	0x0f3dfc04, 0x0eebbc00, 0x00b77c00, 0x00fffc00,
+	0x00fffc00, 0x01eafc04, 0x1fb5fc45, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+
+	/* Not used part of burst write is used for precharge, Offset 0x2C */
+	0x0ff5fc04, 0xfffffc05, _NOT_USED_, _NOT_USED_,
+	/* _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, */
+
+	/* Period timer service. Offset 0x30. Refresh. Wait at least 70 ns after refresh command */
+	0x1ffd7c04, 0xfffffc04, 0xfffffc04, 0xfffffc05,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+
+	/* Exception, Offset 0x3C */
+	0xfffffc04, 0xfffffc05, _NOT_USED_, _NOT_USED_
+};
+
+const uint fpga_table[] = {
+	/* Single read, offset 0 */
+	0x0cffec04, 0x00ffec04, 0x00ffec04, 0x00ffec04,
+	0x00fffc04, 0x00fffc00, 0x00ffec04, 0xffffec05,
+
+	/* Burst read, Offset 0x8 */
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+
+	/* Single write, Offset 0x18 */
+	0x0cffec04, 0x00ffec04, 0x00ffec04, 0x00ffec04,
+	0x00fffc04, 0x00fffc00, 0x00ffec04, 0xffffec05,
+
+	/* Burst write, Offset 0x20. */
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+
+	/* Period timer service. Offset 0x30. */
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+
+	/* Exception, Offset 0x3C */
+	0xfffffc04, 0xfffffc05, _NOT_USED_, _NOT_USED_
+};
+
+int _initsdram (uint base, uint * noMbytes)
+{
+	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile memctl8xx_t *mc = &immap->im_memctl;
+	volatile u32 *memptr;
+
+	mc->memc_mptpr = MPTPR_PTP_DIV16;	/* (16-17) */
+
+	/*  SDRAM in UPMA
+
+	   GPL_0 is connected instead of A19 to SDRAM.
+	   According to table 16-17, AMx should be 001, i.e. type 1
+	   and GPL_0 should hold address A10 when multiplexing */
+
+	mc->memc_mamr = (0x2E << MAMR_PTA_SHIFT) | MAMR_PTAE | MAMR_AMA_TYPE_1 | MAMR_G0CLA_A10 | MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_1X;	/* (16-13) */
+
+	upmconfig (UPMA, (uint *) sdram_table,
+			   sizeof (sdram_table) / sizeof (uint));
+
+	/* Perform init of sdram ( Datasheet Page 9 )
+	   Precharge */
+	mc->memc_mcr = 0x8000212C;	/* run upm a at 0x2C (16-15) */
+
+	/* Run 2 refresh cycles */
+	mc->memc_mcr = 0x80002130;	/* run upm a at 0x30 (16-15) */
+	mc->memc_mcr = 0x80002130;	/* run upm a at 0x30 (16-15) */
+
+	/* Set Mode register */
+	mc->memc_mar = 0x00000088;	/* set mode register (address) to 0x022 (16-17) */
+	/* Lower 2 bits are not connected to chip */
+	mc->memc_mcr = 0x80002114;	/* run upm a at 0x14 (16-15) */
+
+	/* CS1, base 0x0000000 - 64 Mbyte, use UPM A */
+	mc->memc_or1 = 0xfc000000 | OR_CSNT_SAM;
+	mc->memc_br1 = BR_MS_UPMA | BR_V;	/* SDRAM base always 0 */
+
+	/* Test if we really have 64 MB SDRAM */
+	memptr = (u32 *) 0;
+	*memptr = 0;
+
+	memptr = (u32 *) 0x2000000;	/* First u32 in upper 32 MB */
+	*memptr = 0x12345678;
+
+	memptr = (u32 *) 0;
+	if (*memptr == 0x12345678) {
+		/* Wrapped, only have 32 MB */
+		mc->memc_or1 = 0xfe000000 | OR_CSNT_SAM;
+		*noMbytes = 32;
+	} else {
+		/* 64 MB */
+		*noMbytes = 64;
+	}
+
+	/* Setup FPGA in UPMB */
+	upmconfig (UPMB, (uint *) fpga_table,
+			   sizeof (fpga_table) / sizeof (uint));
+
+	/* Enable UPWAITB */
+	mc->memc_mbmr = MAMR_GPL_B4DIS;	/* (16-13) */
+
+	/* CS2, base FPGA_2_BASE - 4 MByte, use UPM B 32 Bit */
+	mc->memc_or2 = 0xffc00000 | OR_BI;
+	mc->memc_br2 = FPGA_2_BASE | BR_MS_UPMB | BR_V;
+
+	/* CS3, base FPGA_3_BASE - 4 MByte, use UPM B 16 bit */
+	mc->memc_or3 = 0xffc00000 | OR_BI;
+	mc->memc_br3 = FPGA_3_BASE | BR_MS_UPMB | BR_V | BR_PS_16;
+
+	return 0;
+}
+
+/* ------------------------------------------------------------------------- */
+
+void _sdramdisable (void)
+{
+	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile memctl8xx_t *memctl = &immap->im_memctl;
+
+	memctl->memc_br1 = 0x00000000;
+
+	/* maybe we should turn off upmb here or something */
+}
+
+/* ------------------------------------------------------------------------- */
+
+int initsdram (uint base, uint * noMbytes)
+{
+	*noMbytes = 32;
+
+#ifdef CONFIG_START_IN_RAM
+	/* SDRAM is already setup. Dont touch it */
+	return 0;
+#else
+
+	if (!_initsdram (base, noMbytes)) {
+
+		return 0;
+	} else {
+		_sdramdisable ();
+
+		return -1;
+	}
+#endif
+}
+
+long int initdram (int board_type)
+{
+	u32 *i;
+	u32 j;
+	u32 k;
+
+	/* GTH only have SDRAM */
+	uint sdramsz;
+
+	if (!initsdram (0x00000000, &sdramsz)) {
+		printf ("(%u MB SDRAM) ", sdramsz);
+	} else {
+	/********************************
+     *SDRAM ERROR, HALT PROCESSOR
+     *********************************/
+		printf ("SDRAM ERROR\n");
+		while (1);
+	}
+
+#ifndef CONFIG_START_IN_RAM
+
+#define U32_S ((sdramsz<<18)-1)
+
+#if 1
+	/* Do a simple memory test */
+	for (i = (u32 *) 0, j = 0; (u32) i < U32_S; i += 2, j += 2) {
+		*i = j + (j << 17);
+		*(i + 1) = ~(j + (j << 18));
+	}
+
+	WATCHDOG_RESET ();
+
+	printf (".");
+
+	for (i = (u32 *) 0, j = 0; (u32) i < U32_S; i += 2, j += 2) {
+		k = *i;
+		if (k != (j + (j << 17))) {
+			printf ("Mem test error, i=0x%x, 0x%x\n, 0x%x", (u32) i, j, k);
+			while (1);
+		}
+		k = *(i + 1);
+		if (k != ~(j + (j << 18))) {
+			printf ("Mem test error(+1), i=0x%x, 0x%x\n, 0x%x",
+					(u32) i + 1, j, k);
+			while (1);
+		}
+	}
+#endif
+
+	WATCHDOG_RESET ();
+
+	/* Clear memory */
+	for (i = (u32 *) 0; (u32) i < U32_S; i++) {
+		*i = 0;
+	}
+#endif /* !start in ram */
+
+	WATCHDOG_RESET ();
+
+	return (sdramsz << 20);
+}
+
+#define POWER_OFFSET    0xF0000
+#define SW_WATCHDOG_REASON 13
+
+#define BOOTDATA_OFFSET 0xF8000
+#define MAX_ATTEMPTS 5
+
+#define FAILSAFE_BOOT 1
+#define SYSTEM_BOOT   2
+
+#define WRITE_FLASH16(a, d)      \
+do                              \
+{                               \
+  *((volatile u16 *) (a)) = (d);\
+ } while(0)
+
+static void write_bootdata (volatile u16 * addr, u8 System, u8 Count)
+{
+	u16 data;
+	volatile u16 *flash = (u16 *) (CFG_FLASH_BASE);
+
+	if ((System != FAILSAFE_BOOT) & (System != SYSTEM_BOOT)) {
+		printf ("Invalid system data %u, setting failsafe\n", System);
+		System = FAILSAFE_BOOT;
+	}
+
+	if ((Count < 1) | (Count > MAX_ATTEMPTS)) {
+		printf ("Invalid boot count %u, setting 1\n", Count);
+		Count = 1;
+	}
+
+	if (System == FAILSAFE_BOOT) {
+		printf ("Setting failsafe boot in flash\n");
+	} else {
+		printf ("Setting system boot in flash\n");
+	}
+	printf ("Boot attempt %d\n", Count);
+
+	data = (System << 8) | Count;
+	/* AMD 16 bit */
+	WRITE_FLASH16 (&flash[0x555], 0xAAAA);
+	WRITE_FLASH16 (&flash[0x2AA], 0x5555);
+	WRITE_FLASH16 (&flash[0x555], 0xA0A0);
+
+	WRITE_FLASH16 (addr, data);
+}
+
+static void maybe_update_restart_reason (volatile u32 * addr32)
+{
+	/* Update addr if sw wd restart */
+	volatile u16 *flash = (u16 *) (CFG_FLASH_BASE);
+	volatile u16 *addr_16 = (u16 *) addr32;
+	u32 rsr;
+
+	/* Dont reset register now */
+	rsr = ((volatile immap_t *) CFG_IMMR)->im_clkrst.car_rsr;
+
+	rsr >>= 24;
+
+	if (rsr & 0x10) {
+		/* Was really a sw wd restart, update reason */
+
+		printf ("Last restart by software watchdog\n");
+
+		/* AMD 16 bit */
+		WRITE_FLASH16 (&flash[0x555], 0xAAAA);
+		WRITE_FLASH16 (&flash[0x2AA], 0x5555);
+		WRITE_FLASH16 (&flash[0x555], 0xA0A0);
+
+		WRITE_FLASH16 (addr_16, 0);
+
+		udelay (1000);
+
+		WATCHDOG_RESET ();
+
+		/* AMD 16 bit */
+		WRITE_FLASH16 (&flash[0x555], 0xAAAA);
+		WRITE_FLASH16 (&flash[0x2AA], 0x5555);
+		WRITE_FLASH16 (&flash[0x555], 0xA0A0);
+
+		WRITE_FLASH16 (addr_16 + 1, SW_WATCHDOG_REASON);
+
+	}
+}
+
+static void check_restart_reason (void)
+{
+	/* Update restart reason if sw watchdog was
+	   triggered */
+
+	int i;
+	volatile u32 *raddr;
+
+	raddr = (u32 *) (CFG_FLASH_BASE + POWER_OFFSET);
+
+	if (*raddr == 0xFFFFFFFF) {
+		/* Nothing written */
+		maybe_update_restart_reason (raddr);
+	} else {
+		/* Search for latest written reason */
+		i = 0;
+		while ((*(raddr + 2) != 0xFFFFFFFF) & (i < 2000)) {
+			raddr += 2;
+			i++;
+		}
+		if (i >= 2000) {
+			/* Whoa, dont write any more */
+			printf ("*** No free restart reason found ***\n");
+		} else {
+			/* Check if written */
+			if (*raddr == 0) {
+				/* Erased by kernel, no new reason written */
+				maybe_update_restart_reason (raddr + 2);
+			}
+		}
+	}
+}
+
+static void check_boot_tries (void)
+{
+	/* Count the number of boot attemps
+	   switch system if too many */
+
+	int i;
+	volatile u16 *addr;
+	volatile u16 data;
+	int failsafe = 1;
+	u8 system;
+	u8 count;
+
+	addr = (u16 *) (CFG_FLASH_BASE + BOOTDATA_OFFSET);
+
+	if (*addr == 0xFFFF) {
+		printf ("*** No bootdata exists. ***\n");
+		write_bootdata (addr, FAILSAFE_BOOT, 1);
+	} else {
+		/* Search for latest written bootdata */
+		i = 0;
+		while ((*(addr + 1) != 0xFFFF) & (i < 8000)) {
+			addr++;
+			i++;
+		}
+		if (i >= 8000) {
+			/* Whoa, dont write any more */
+			printf ("*** No bootdata found. Not updating flash***\n");
+		} else {
+			/* See how many times we have tried to boot real system */
+			data = *addr;
+			system = data >> 8;
+			count = data & 0xFF;
+			if ((system != SYSTEM_BOOT) & (system != FAILSAFE_BOOT)) {
+				printf ("*** Wrong system %d\n", system);
+				system = FAILSAFE_BOOT;
+				count = 1;
+			} else {
+				switch (count) {
+				case 0:
+				case 1:
+				case 2:
+				case 3:
+				case 4:
+					/* Try same system again if needed */
+					count++;
+					break;
+
+				case 5:
+					/* Switch system and reset tries */
+					count = 1;
+					system = 3 - system;
+					printf ("***Too many boot attempts, switching system***\n");
+					break;
+				default:
+					/* Switch system, start over and hope it works */
+					printf ("***Unexpected data on addr 0x%x, %u***\n",
+							(u32) addr, data);
+					count = 1;
+					system = 3 - system;
+				}
+			}
+			write_bootdata (addr + 1, system, count);
+			if (system == SYSTEM_BOOT) {
+				failsafe = 0;
+			}
+		}
+	}
+	if (failsafe) {
+		printf ("Booting failsafe system\n");
+		setenv ("bootargs", "panic=1 root=/dev/hda7");
+		setenv ("bootcmd", "disk 100000 0:5;bootm 100000");
+	} else {
+		printf ("Using normal system\n");
+		setenv ("bootargs", "panic=1 root=/dev/hda4");
+		setenv ("bootcmd", "disk 100000 0:2;bootm 100000");
+	}
+}
+
+int misc_init_r (void)
+{
+	u8 Rx[80];
+	u8 Tx[5];
+	int page;
+	int read = 0;
+	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+
+	/* Kill fpga */
+	immap->im_ioport.iop_papar &= ~(PA_FL_CONFIG | PA_FL_CE);
+	immap->im_ioport.iop_padir |= (PA_FL_CONFIG | PA_FL_CE);
+	immap->im_ioport.iop_paodr &= ~(PA_FL_CONFIG | PA_FL_CE);
+
+	/* Enable fpga, active low */
+	immap->im_ioport.iop_padat &= ~PA_FL_CE;
+
+	/* Start configuration */
+	immap->im_ioport.iop_padat &= ~PA_FL_CONFIG;
+	udelay (2);
+
+	immap->im_ioport.iop_padat |= (PA_FL_CONFIG | PA_FL_CE);
+
+	/* Check if we need to boot failsafe system */
+	check_boot_tries ();
+
+	/* Check if we need to update restart reason */
+	check_restart_reason ();
+
+	if (ee_init_data ()) {
+		printf ("EEPROM init failed\n");
+		return (0);
+	}
+
+	/* Read the pages where ethernet address is stored */
+
+	for (page = EE_USER_PAGE_0; page <= EE_USER_PAGE_0 + 2; page++) {
+		/* Copy from nvram to scratchpad */
+		Tx[0] = RECALL_MEMORY;
+		Tx[1] = page;
+		if (ee_do_command (Tx, 2, NULL, 0, TRUE)) {
+			printf ("EE user page %d recall failed\n", page);
+			return (0);
+		}
+
+		Tx[0] = READ_SCRATCHPAD;
+		if (ee_do_command (Tx, 2, Rx + read, 9, TRUE)) {
+			printf ("EE user page %d read failed\n", page);
+			return (0);
+		}
+		/* Crc in 9:th byte */
+		if (!ee_crc_ok (Rx + read, 8, *(Rx + read + 8))) {
+			printf ("EE read failed, page %d. CRC error\n", page);
+			return (0);
+		}
+		read += 8;
+	}
+
+	/* Add eos after eth addr */
+	Rx[17] = 0;
+
+	printf ("Ethernet addr read from eeprom: %s\n\n", Rx);
+
+	if ((Rx[2] != ':') |
+		(Rx[5] != ':') |
+		(Rx[8] != ':') | (Rx[11] != ':') | (Rx[14] != ':')) {
+		printf ("*** ethernet addr invalid, using default ***\n");
+	} else {
+		setenv ("ethaddr", Rx);
+	}
+	return (0);
+}
diff --git a/board/hermes/hermes.c b/board/hermes/hermes.c
new file mode 100644
index 0000000..97a7745
--- /dev/null
+++ b/board/hermes/hermes.c
@@ -0,0 +1,637 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <commproc.h>
+#include <mpc8xx.h>
+
+#ifdef CONFIG_SHOW_BOOT_PROGRESS
+# include <status_led.h>
+# define SHOW_BOOT_PROGRESS(arg)	show_boot_progress(arg)
+#else
+# define SHOW_BOOT_PROGRESS(arg)
+#endif
+
+/* ------------------------------------------------------------------------- */
+
+static long int dram_size (long int, long int *, long int);
+static ulong board_init (void);
+static void send_smi_frame (volatile scc_t * sp, volatile cbd_t * bd,
+							uchar * msg);
+
+/* ------------------------------------------------------------------------- */
+
+#define	_NOT_USED_	0xFFFFFFFF
+
+const uint sdram_table[] = {
+	/*
+	 * Single Read. (Offset 0 in UPMA RAM)
+	 */
+	0x1f07fc04, 0xeeaefc04, 0x11adfc04, 0xefbbbc00,
+	0x1ff77c47,					/* last */
+	/*
+	 * SDRAM Initialization (offset 5 in UPMA RAM)
+	 *
+	 * This is no UPM entry point. The following definition uses
+	 * the remaining space to establish an initialization
+	 * sequence, which is executed by a RUN command.
+	 *
+	 */
+	0x1fe77c35, 0xffaffc34, 0x1fa57c35,	/* last */
+	/*
+	 * Burst Read. (Offset 8 in UPMA RAM)
+	 */
+	0x1f07fc04, 0xeeaefc04, 0x10adfc04, 0xf0affc00,
+	0xf0affc00, 0xf1affc00, 0xefbbbc00, 0x1ff77c47,	/* last */
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	/*
+	 * Single Write. (Offset 18 in UPMA RAM)
+	 */
+	0x1f27fc04, 0xeeaebc00, 0x01b93c04, 0x1ff77c47,	/* last */
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	/*
+	 * Burst Write. (Offset 20 in UPMA RAM)
+	 */
+	0x1f07fc04, 0xeeaebc00, 0x10ad4c00, 0xf0afcc00,
+	0xf0afcc00, 0xe1bb8c06, 0x1ff77c47,	/* last */
+	_NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	/*
+	 * Refresh  (Offset 30 in UPMA RAM)
+	 */
+	0x1ff5fc84, 0xfffffc04, 0xfffffc04, 0xfffffc04,
+	0xfffffc84, 0xfffffc07,		/* last */
+	_NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	/*
+	 * Exception. (Offset 3c in UPMA RAM)
+	 */
+	0x7ffffc07,					/* last */
+	_NOT_USED_, _NOT_USED_, _NOT_USED_,
+};
+
+/* ------------------------------------------------------------------------- */
+
+
+/*
+ * Check Board Identity:
+ *
+ * Test ID string (HERMES...)
+ *
+ * Return code for board revision and network speed
+ */
+
+int checkboard (void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	unsigned char *s = getenv ("serial#");
+	unsigned char *e;
+
+	puts ("Board: ");
+
+	if (!s || strncmp (s, "HERMES", 6)) {
+		puts ("### No HW ID - assuming HERMES-PRO");
+	} else {
+		for (e = s; *e; ++e) {
+			if (*e == ' ')
+				break;
+		}
+
+		for (; s < e; ++s) {
+			putc (*s);
+		}
+	}
+
+	gd->board_type = board_init ();
+
+	printf ("  Rev. %ld.x\n", (gd->board_type >> 16));
+
+	return (0);
+}
+
+/* ------------------------------------------------------------------------- */
+
+long int initdram (int board_type)
+{
+	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile memctl8xx_t *memctl = &immap->im_memctl;
+	long int size, size8, size9;
+
+	upmconfig (UPMA, (uint *) sdram_table,
+			   sizeof (sdram_table) / sizeof (uint));
+
+	/*
+	 * Preliminary prescaler for refresh
+	 */
+	memctl->memc_mptpr = 0x0400;
+
+	memctl->memc_mar = 0x00000088;
+
+	/*
+	 * Map controller banks 1 to the SDRAM banks at preliminary address
+	 */
+	memctl->memc_or1 = CFG_OR1_PRELIM;
+	memctl->memc_br1 = CFG_BR1_PRELIM;
+
+	/* HERMES-PRO boards have only one bank SDRAM */
+
+
+	udelay (200);
+
+	/* perform SDRAM initializsation sequence */
+
+	memctl->memc_mamr = 0xD0802114;
+	memctl->memc_mcr = 0x80002105;
+	udelay (1);
+	memctl->memc_mamr = 0xD0802118;
+	memctl->memc_mcr = 0x80002130;
+	udelay (1);
+	memctl->memc_mamr = 0xD0802114;
+	memctl->memc_mcr = 0x80002106;
+
+	udelay (1000);
+
+	/*
+	 * Check Bank 0 Memory Size for re-configuration
+	 *
+	 * try 8 column mode
+	 */
+	size8 = dram_size (CFG_MAMR_8COL, (ulong *) SDRAM_BASE_PRELIM,
+					   SDRAM_MAX_SIZE);
+
+	udelay (1000);
+
+	/*
+	 * try 9 column mode
+	 */
+	size9 = dram_size (CFG_MAMR_9COL, (ulong *) SDRAM_BASE_PRELIM,
+					   SDRAM_MAX_SIZE);
+
+	if (size8 < size9) {		/* leave configuration at 9 columns */
+		size = size9;
+/*	debug ("SDRAM Bank 0 in 9 column mode: %ld MB\n", size >> 20);	*/
+	} else {					/* back to 8 columns            */
+		size = size8;
+		memctl->memc_mamr = CFG_MAMR_8COL;
+		udelay (500);
+/*	debug ("SDRAM Bank 0 in 8 column mode: %ld MB\n", size >> 20);	*/
+	}
+
+	udelay (1000);
+
+	memctl->memc_or1 = ((-size) & 0xFFFF0000) | SDRAM_TIMING;
+	memctl->memc_br1 = (CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
+
+	udelay (10000);
+
+	return (size);
+}
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * Check memory range for valid RAM. A simple memory test determines
+ * the actually available RAM size between addresses `base' and
+ * `base + maxsize'. Some (not all) hardware errors are detected:
+ * - short between address lines
+ * - short between data lines
+ */
+
+static long int dram_size (long int mamr_value, long int *base,
+						   long int maxsize)
+{
+	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile memctl8xx_t *memctl = &immap->im_memctl;
+	volatile long int *addr;
+	ulong cnt, val;
+	ulong save[32];				/* to make test non-destructive */
+	unsigned char i = 0;
+
+	memctl->memc_mamr = mamr_value;
+
+	for (cnt = maxsize / sizeof (long); cnt > 0; cnt >>= 1) {
+		addr = base + cnt;		/* pointer arith! */
+
+		save[i++] = *addr;
+		*addr = ~cnt;
+	}
+
+	/* write 0 to base address */
+	addr = base;
+	save[i] = *addr;
+	*addr = 0;
+
+	/* check at base address */
+	if ((val = *addr) != 0) {
+		*addr = save[i];
+		return (0);
+	}
+
+	for (cnt = 1; cnt <= maxsize / sizeof (long); cnt <<= 1) {
+		addr = base + cnt;		/* pointer arith! */
+
+		val = *addr;
+		*addr = save[--i];
+
+		if (val != (~cnt)) {
+			return (cnt * sizeof (long));
+		}
+	}
+	return (maxsize);
+}
+
+/* ------------------------------------------------------------------------- */
+
+#define	PB_LED_3	0x00020000	/* Status LED's */
+#define PB_LED_2	0x00010000
+#define PB_LED_1	0x00008000
+#define PB_LED_0	0x00004000
+
+#define PB_LED_ALL	(PB_LED_0 | PB_LED_1 | PB_LED_2 | PB_LED_3)
+
+#define	PC_REP_SPD1	0x00000800
+#define PC_REP_SPD0	0x00000400
+
+#define PB_RESET_2081	0x00000020	/* Reset PEB2081 */
+
+#define PB_MAI_4	0x00000010	/* Configuration */
+#define PB_MAI_3	0x00000008
+#define PB_MAI_2	0x00000004
+#define PB_MAI_1	0x00000002
+#define PB_MAI_0	0x00000001
+
+#define PB_MAI_ALL	(PB_MAI_0 | PB_MAI_1 | PB_MAI_2 | PB_MAI_3 | PB_MAI_4)
+
+
+#define	PC_REP_MGRPRS	0x0200
+#define PC_REP_SPD	0x0040		/* Select 100 Mbps */
+#define PC_REP_RES	0x0004
+#define PC_BIT14	0x0002		/* ??? */
+#define PC_BIT15	0x0001		/* ??? ENDSL ?? */
+
+/* ------------------------------------------------------------------------- */
+
+static ulong board_init (void)
+{
+	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+	ulong reg, revision, speed = 100;
+	int ethspeed;
+	char *s;
+
+	if ((s = getenv ("ethspeed")) != NULL) {
+		if (strcmp (s, "100") == 0) {
+			ethspeed = 100;
+		} else if (strcmp (s, "10") == 0) {
+			ethspeed = 10;
+		} else {
+			ethspeed = 0;
+		}
+	} else {
+		ethspeed = 0;
+	}
+
+	/* Configure Port B Output Pins => 0x0003cc3F */
+	reg = PB_LED_ALL | PC_REP_SPD1 | PC_REP_SPD0 | PB_RESET_2081 |
+			PB_MAI_ALL;
+	immr->im_cpm.cp_pbpar &= ~reg;
+	immr->im_cpm.cp_pbodr &= ~reg;
+	immr->im_cpm.cp_pbdat &= ~reg;	/* all 0 */
+	immr->im_cpm.cp_pbdir |= reg;
+
+	/* Check hardware revision */
+	if ((immr->im_ioport.iop_pcdat & 0x0003) == 0x0003) {
+		/*
+		 * Revision 3.x hardware
+		 */
+		revision = 3;
+
+		immr->im_ioport.iop_pcdat = 0x0240;
+		immr->im_ioport.iop_pcdir = (PC_REP_MGRPRS | PC_REP_SPD | PC_REP_RES | PC_BIT14);	/* = 0x0246 */
+		immr->im_ioport.iop_pcdat |= PC_REP_RES;
+	} else {
+		immr->im_ioport.iop_pcdat = 0x0002;
+		immr->im_ioport.iop_pcdir = (PC_REP_MGRPRS | PC_REP_RES | PC_BIT14 | PC_BIT15);	/* = 0x0207 */
+
+		if ((immr->im_ioport.iop_pcdat & PC_REP_SPD) == 0) {
+			/*
+			 * Revision 2.x hardware: PC9 connected to PB21
+			 */
+			revision = 2;
+
+			if (ethspeed == 0) {
+				/* both 10 and 100 Mbps allowed:
+				 * select 10 Mbps and autonegotiation
+				 */
+				puts ("  [10+100]");
+				immr->im_cpm.cp_pbdat = 0;	/* SPD1:SPD0 = 0:0 - autonegot. */
+				speed = 10;
+			} else if (ethspeed == 10) {
+				/* we are asked for 10 Mbps,
+				 * so select 10 Mbps
+				 */
+				puts ("  [10]");
+				immr->im_cpm.cp_pbdat = 0;	/* ??? */
+				speed = 10;
+			} else {
+				/* anything else:
+				 * select 100 Mbps
+				 */
+				puts ("  [100]");
+				immr->im_cpm.cp_pbdat = PC_REP_SPD0 | PC_REP_SPD1;
+				/* SPD1:SPD0 = 1:1 - 100 Mbps */
+				speed = 100;
+			}
+			immr->im_ioport.iop_pcdat |= (PC_REP_RES | PC_BIT14);
+
+			/* must be run from RAM  */
+			/* start_lxt980 (speed); */
+		/*************************/
+		} else {
+			/*
+			 * Revision 1.x hardware
+			 */
+			revision = 1;
+
+			immr->im_ioport.iop_pcdat = PC_REP_MGRPRS | PC_BIT14;	/* = 0x0202 */
+			immr->im_ioport.iop_pcdir = (PC_REP_MGRPRS | PC_REP_SPD | PC_REP_RES | PC_BIT14 | PC_BIT15);	/* = 0x0247 */
+
+			if (ethspeed == 0) {
+				/* both 10 and 100 Mbps allowed:
+				 * select 100 Mbps and autonegotiation
+				 */
+				puts ("  [10+100]");
+				immr->im_cpm.cp_pbdat = 0;	/* SPD1:SPD0 = 0:0 - autonegot. */
+				immr->im_ioport.iop_pcdat |= PC_REP_SPD;
+			} else if (ethspeed == 10) {
+				/* we are asked for 10 Mbps,
+				   * so select 10 Mbps
+				 */
+				puts ("  [10]");
+				immr->im_cpm.cp_pbdat = PC_REP_SPD0;	/* SPD1:SPD0 = 0:1 - 10 Mbps */
+			} else {
+				/* anything else:
+				   * select 100 Mbps
+				 */
+				puts ("  [100]");
+				immr->im_cpm.cp_pbdat = PC_REP_SPD0 | PC_REP_SPD1;
+				/* SPD1:SPD0 = 1:1 - 100 Mbps */
+				immr->im_ioport.iop_pcdat |= PC_REP_SPD;
+			}
+
+			immr->im_ioport.iop_pcdat |= PC_REP_RES;
+		}
+	}
+	SHOW_BOOT_PROGRESS (0x00);
+
+	return ((revision << 16) | (speed & 0xFFFF));
+}
+
+/* ------------------------------------------------------------------------- */
+
+#define SCC_SM		1			/* Index => SCC2 */
+#define	PROFF		PROFF_SCC2
+
+#define SMI_MSGLEN	8			/* Length of SMI Messages        */
+
+#define PHYGPCR_ADDR	0x109	/* Port Enable               */
+#define PHYPCR_ADDR	0x132		/* PHY Port Control Reg. (port 1)    */
+#define LEDPCR_ADDR	0x141		/* LED Port Control Reg.         */
+#define RPRESET_ADDR	0x144	/* Repeater Reset            */
+
+#define PHYPCR_SPEED	0x2000	/* on for 100 Mbps, off for 10 Mbps  */
+#define PHYPCR_AN	0x1000		/* on to enable  Auto-Negotiation    */
+#define PHYPCR_REST_AN	0x0200	/* on to restart Auto-Negotiation    */
+#define PHYPCR_FDX	0x0100		/* on for Full Duplex, off for HDX   */
+#define PHYPCR_COLT	0x0080		/* on to enable COL signal test      */
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * Must run from RAM:
+ * uses parameter RAM area which is used for stack while running from ROM
+ */
+void hermes_start_lxt980 (int speed)
+{
+	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+	volatile cpm8xx_t *cp = (cpm8xx_t *) & (immr->im_cpm);
+	volatile scc_t *sp = (scc_t *) & (cp->cp_scc[SCC_SM]);
+	volatile cbd_t *bd;
+	volatile hdlc_pram_t *hp;
+	uchar smimsg[SMI_MSGLEN];
+	ushort phypcrval;
+	uint bd_off;
+	int pnr;
+
+	printf ("LXT9880: %3d Mbps\n", speed);
+
+	immr->im_ioport.iop_paodr |= 0x0008;	/* init PAODR: PA12 (TXD2) open drain */
+	immr->im_ioport.iop_papar |= 0x400c;	/* init PAPAR: TXD2, RXD2, BRGO4 */
+	immr->im_ioport.iop_padir &= 0xbff3;	/* init PADIR: BRGO4 */
+	immr->im_ioport.iop_padir |= 0x4000;
+
+	/* get temporary BD; no need for permanent alloc */
+	bd_off = dpram_base_align (8);
+
+	bd = (cbd_t *) (immr->im_cpm.cp_dpmem + bd_off);
+
+	bd->cbd_bufaddr = 0;
+	bd->cbd_datlen = 0;
+	bd->cbd_sc = BD_SC_WRAP | BD_SC_LAST | BD_SC_INTRPT | BD_SC_TC;
+
+	/* init. baudrate generator BRG4 */
+	cp->cp_brgc4 = (0x00010000 | (50 << 1));	/* output 1 MHz */
+
+	cp->cp_sicr &= 0xFFFF00FF;	/* SICR: mask SCC2 */
+	cp->cp_sicr |= 0x00001B00;	/* SICR: SCC2 clk BRG4 */
+
+	/* init SCC_SM register */
+	sp->scc_psmr = 0x0000;		/* init PSMR: no additional flags */
+	sp->scc_todr = 0x0000;
+	sp->scc_dsr = 0x7e7e;
+
+	/* init. SCC_SM parameter area */
+	hp = (hdlc_pram_t *) & cp->cp_dparam[PROFF];
+
+	hp->tbase = bd_off;			/* offset from beginning of DPRAM */
+
+	hp->rfcr = 0x18;
+	hp->tfcr = 0x18;
+	hp->mrblr = 10;
+
+	hp->c_mask = 0x0000f0b8;
+	hp->c_pres = 0x0000ffff;
+
+	hp->disfc = 0;
+	hp->crcec = 0;
+	hp->abtsc = 0;
+	hp->nmarc = 0;
+	hp->retrc = 0;
+
+	hp->mflr = 10;
+
+	hp->rfthr = 1;
+
+	hp->hmask = 0;
+	hp->haddr1 = 0;
+	hp->haddr2 = 0;
+	hp->haddr3 = 0;
+	hp->haddr4 = 0;
+
+	cp->cp_cpcr = SCC_SM << 6 | 0x0001;	/* SCC_SM: init TX/RX params */
+	while (cp->cp_cpcr & CPM_CR_FLG);
+
+	/* clear all outstanding SCC events */
+	sp->scc_scce = ~0;
+
+	/* enable transmitter: GSMR_L: TPL=2(16bits), TPP=3(all ones), ENT */
+	sp->scc_gsmrh = 0;
+	sp->scc_gsmrl |= SCC_GSMRL_TPL_16 | SCC_GSMRL_TPP_ALL1 |
+			SCC_GSMRL_ENT | SCC_GSMRL_MODE_HDLC;
+
+#if 0
+	smimsg[0] = 0x00;			/* CHIP/HUB ID */
+	smimsg[1] = 0x38;			/* WRITE CMD */
+	smimsg[2] = (RPRESET_ADDR << 4) & 0xf0;
+	smimsg[3] = RPRESET_ADDR >> 4;
+	smimsg[4] = 0x01;
+	smimsg[5] = 0x00;
+	smimsg[6] = 0x00;
+	smimsg[7] = 0x00;
+
+	send_smi_frame (sp, bd, smimsg);
+#endif
+
+	smimsg[0] = 0x7f;			/* BROADCAST */
+	smimsg[1] = 0x34;			/* ASSIGN HUB ID */
+	smimsg[2] = 0x00;
+	smimsg[3] = 0x00;
+	smimsg[4] = 0x00;			/* HUB ID = 0 */
+	smimsg[5] = 0x00;
+	smimsg[6] = 0x00;
+	smimsg[7] = 0x00;
+
+	send_smi_frame (sp, bd, smimsg);
+
+	smimsg[0] = 0x7f;			/* BROADCAST */
+	smimsg[1] = 0x3c;			/* SET ARBOUT TO 0 */
+	smimsg[2] = 0x00;			/* ADDRESS = 0 */
+	smimsg[3] = 0x00;
+	smimsg[4] = 0x00;			/* DATA = 0 */
+	smimsg[5] = 0x00;
+	smimsg[6] = 0x00;
+	smimsg[7] = 0x00;
+
+	send_smi_frame (sp, bd, smimsg);
+
+	if (speed == 100) {
+		phypcrval = PHYPCR_SPEED;	/* 100 MBIT, disable autoneg. */
+	} else {
+		phypcrval = 0;			/* 10 MBIT, disable autoneg. */
+	}
+
+	/* send MSGs */
+	for (pnr = 0; pnr < 8; pnr++) {
+		smimsg[0] = 0x00;		/* CHIP/HUB ID */
+		smimsg[1] = 0x38;		/* WRITE CMD */
+		smimsg[2] = ((PHYPCR_ADDR + pnr) << 4) & 0xf0;
+		smimsg[3] = (PHYPCR_ADDR + pnr) >> 4;
+		smimsg[4] = (unsigned char) (phypcrval & 0xff);
+		smimsg[5] = (unsigned char) (phypcrval >> 8);
+		smimsg[6] = 0x00;
+		smimsg[7] = 0x00;
+
+		send_smi_frame (sp, bd, smimsg);
+	}
+
+	smimsg[0] = 0x00;			/* CHIP/HUB ID */
+	smimsg[1] = 0x38;			/* WRITE CMD */
+	smimsg[2] = (PHYGPCR_ADDR << 4) & 0xf0;
+	smimsg[3] = PHYGPCR_ADDR >> 4;
+	smimsg[4] = 0xff;			/* enable port 1-8 */
+	smimsg[5] = 0x01;			/* enable MII1 (0x01) */
+	smimsg[6] = 0x00;
+	smimsg[7] = 0x00;
+
+	send_smi_frame (sp, bd, smimsg);
+
+	smimsg[0] = 0x00;			/* CHIP/HUB ID */
+	smimsg[1] = 0x38;			/* WRITE CMD */
+	smimsg[2] = (LEDPCR_ADDR << 4) & 0xf0;
+	smimsg[3] = LEDPCR_ADDR >> 4;
+	smimsg[4] = 0xaa;			/* Port 1-8 Conf.bits = 10 (Hardware control) */
+	smimsg[5] = 0xaa;
+	smimsg[6] = 0x00;
+	smimsg[7] = 0x00;
+
+	send_smi_frame (sp, bd, smimsg);
+
+	/*
+	 * Disable Transmitter (so that we can free the BD, too)
+	 */
+	sp->scc_gsmrl &= ~SCC_GSMRL_ENT;
+}
+
+/* ------------------------------------------------------------------------- */
+
+static void send_smi_frame (volatile scc_t * sp, volatile cbd_t * bd,
+							uchar * msg)
+{
+#ifdef DEBUG
+	unsigned hub, chip, cmd, length, addr;
+
+	hub = msg[0] & 0x1F;
+	chip = msg[0] >> 5;
+	cmd = msg[1] & 0x1F;
+	length = (msg[1] >> 5) | ((msg[2] & 0x0F) << 3);
+	addr = (msg[2] >> 4) | (msg[3] << 4);
+
+	printf ("SMI send: Hub %02x Chip %x Cmd %02x Len %d Addr %03x: "
+			"%02x %02x %02x %02x\n",
+			hub, chip, cmd, length, addr, msg[4], msg[5], msg[6], msg[7]);
+#endif /* DEBUG */
+
+	bd->cbd_bufaddr = (uint) msg;
+	bd->cbd_datlen = SMI_MSGLEN;
+	bd->cbd_sc |= BD_SC_READY;
+
+	/* wait for msg transmitted */
+	while ((sp->scc_scce & 0x0002) == 0);
+	/* clear all events */
+	sp->scc_scce = ~0;
+}
+
+/* ------------------------------------------------------------------------- */
+
+void show_boot_progress (int status)
+{
+	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+
+	status ^= 0x0F;
+	status = (status & 0x0F) << 14;
+	immr->im_cpm.cp_pbdat = (immr->im_cpm.cp_pbdat & ~PB_LED_ALL) | status;
+}
+
+/* ------------------------------------------------------------------------- */
diff --git a/board/hymod/bsp.c b/board/hymod/bsp.c
new file mode 100644
index 0000000..a33c97c
--- /dev/null
+++ b/board/hymod/bsp.c
@@ -0,0 +1,307 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * hacked for Hymod FPGA support by Murray.Jensen@cmst.csiro.au, 29-Jan-01
+ */
+
+#include <common.h>
+#include <command.h>
+#include <net.h>
+#include <i2c.h>
+#include <asm/iopin_8260.h>
+#include <cmd_bsp.h>
+
+/*-----------------------------------------------------------------------
+ * Board Special Commands: FPGA load/store, EEPROM erase
+ */
+
+#if (CONFIG_COMMANDS & CFG_CMD_BSP)
+
+#define LOAD_SUCCESS		0
+#define LOAD_FAIL_NOCONF	1
+#define LOAD_FAIL_NOINIT	2
+#define LOAD_FAIL_NODONE	3
+
+#define STORE_SUCCESS		0
+
+/*
+ * Programming the Hymod FPGAs
+ *
+ * The 8260 io port config table is set up so that the INIT pin is
+ * held Low (Open Drain output 0) - this will delay the automatic
+ * Power-On config until INIT is released (by making it an input).
+ *
+ * If the FPGA has been programmed before, then the assertion of PROGRAM
+ * will initiate configuration (i.e. it begins clearing the RAM).
+ *
+ * When the FPGA is ready to receive configuration data (either after
+ * releasing INIT after Power-On, or after asserting PROGRAM), it will
+ * pull INIT high.
+ *
+ * Notes from Paul Dunn:
+ *
+ *  1. program pin should be forced low for >= 300ns
+ *     (about 20 bus clock cycles minimum).
+ *
+ *  2. then wait for init to go high, which signals
+ *     that the FPGA has cleared its internal memory
+ *     and is ready to load
+ *
+ *  3. perform load writes of entire config file
+ *
+ *  4. wait for done to go high, which should be
+ *     within a few bus clock cycles. If done has not
+ *     gone high after reasonable period, then load
+ *     has not worked (wait several ms?)
+ */
+
+int fpga_load (int mezz, uchar * addr, ulong size)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	hymod_conf_t *cp = &gd->bd->bi_hymod_conf;
+	xlx_iopins_t *fpgaio;
+	volatile uchar *fpgabase;
+	volatile uint cnt;
+	uchar *eaddr = addr + size;
+	int result;
+
+	if (mezz) {
+		if (!cp->mezz.mmap[0].prog.exists)
+			return (LOAD_FAIL_NOCONF);
+		fpgabase = (uchar *) cp->mezz.mmap[0].prog.base;
+		fpgaio = &cp->mezz.iopins[0];
+	} else {
+		if (!cp->main.mmap[0].prog.exists)
+			return (LOAD_FAIL_NOCONF);
+		fpgabase = (uchar *) cp->main.mmap[0].prog.base;
+		fpgaio = &cp->main.iopins[0];
+	}
+
+	/* set enable HIGH if required */
+	if (fpgaio->enable_pin.flag)
+		iopin_set_high (&fpgaio->enable_pin);
+
+	/* ensure INIT is released (set it to be an input) */
+	iopin_set_in (&fpgaio->init_pin);
+
+	/* toggle PROG Low then High (will already be Low after Power-On) */
+	iopin_set_low (&fpgaio->prog_pin);
+	udelay (1);					/* minimum 300ns - 1usec should do it */
+	iopin_set_high (&fpgaio->prog_pin);
+
+	/* wait for INIT High */
+	cnt = 0;
+	while (!iopin_is_high (&fpgaio->init_pin))
+		if (++cnt == 10000000) {
+			result = LOAD_FAIL_NOINIT;
+			goto done;
+		}
+
+	/* write configuration data */
+	while (addr < eaddr)
+		*fpgabase = *addr++;
+
+	/* wait for DONE High */
+	cnt = 0;
+	while (!iopin_is_high (&fpgaio->done_pin))
+		if (++cnt == 100000000) {
+			result = LOAD_FAIL_NODONE;
+			goto done;
+		}
+
+	/* success */
+	result = LOAD_SUCCESS;
+
+  done:
+
+	if (fpgaio->enable_pin.flag)
+		iopin_set_low (&fpgaio->enable_pin);
+
+	return (result);
+}
+
+/* ------------------------------------------------------------------------- */
+int
+do_fpga (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+{
+	uchar *addr, *save_addr;
+	ulong size;
+	int mezz, arg, result;
+
+	switch (argc) {
+
+	case 0:
+	case 1:
+		break;
+
+	case 2:
+		if (strcmp (argv[1], "info") == 0) {
+			printf ("\nHymod FPGA Info...\n");
+			printf ("				Address		Size\n");
+			printf ("	Main Configuration:	0x%08x	%d\n",
+					FPGA_MAIN_CFG_BASE, FPGA_MAIN_CFG_SIZE);
+			printf ("	Main Register:		0x%08x	%d\n",
+					FPGA_MAIN_REG_BASE, FPGA_MAIN_REG_SIZE);
+			printf ("	Main Port:		0x%08x	%d\n",
+					FPGA_MAIN_PORT_BASE, FPGA_MAIN_PORT_SIZE);
+			printf ("	Mezz Configuration:	0x%08x	%d\n",
+					FPGA_MEZZ_CFG_BASE, FPGA_MEZZ_CFG_SIZE);
+			return 0;
+		}
+		break;
+
+	case 3:
+		if (strcmp (argv[1], "store") == 0) {
+			addr = (uchar *) simple_strtoul (argv[2], NULL, 16);
+
+			save_addr = addr;
+#if 0
+			/* reading config data unimplemented */
+			while VM
+			  :more config data * addr++ = *fpga;
+		  result = VM:? ? ?
+#else
+			result = 0;
+#endif
+			if (result == STORE_SUCCESS) {
+				printf ("SUCCEEDED (%d bytes)\n", addr - save_addr);
+				return 0;
+			} else
+				printf ("FAILED (%d bytes)\n", addr - save_addr);
+			return 1;
+		}
+		break;
+
+	case 4:
+		if (strcmp (argv[1], "tftp") == 0) {
+			copy_filename (BootFile, argv[2], sizeof (BootFile));
+			load_addr = simple_strtoul (argv[3], NULL, 16);
+
+			if (NetLoop (TFTP) == 0) {
+				printf ("tftp transfer failed - aborting fgpa load\n");
+				return 1;
+			}
+
+			if (NetBootFileXferSize == 0) {
+				printf ("can't determine file size - aborting fpga load\n");
+				return 1;
+			}
+
+			printf ("File transfer succeeded - beginning fpga load...");
+
+			result = fpga_load (0, (uchar *) load_addr,
+								NetBootFileXferSize);
+			if (result == LOAD_SUCCESS) {
+				printf ("SUCCEEDED\n");
+				return 0;
+			} else if (result == LOAD_FAIL_NOINIT)
+				printf ("FAILED (no INIT)\n");
+			else
+				printf ("FAILED (no DONE)\n");
+			return 1;
+
+		}
+		/* fall through ... */
+
+	case 5:
+		if (strcmp (argv[1], "load") == 0) {
+			if (argc == 5) {
+				if (strcmp (argv[2], "main") == 0)
+					mezz = 0;
+				else if (strcmp (argv[2], "mezz") == 0)
+					mezz = 1;
+				else {
+					printf ("FPGA type must be either `main' or `mezz'\n");
+					return 1;
+				}
+				arg = 3;
+			} else {
+				mezz = 0;
+				arg = 2;
+			}
+			addr = (uchar *) simple_strtoul (argv[arg++], NULL, 16);
+			size = (ulong) simple_strtoul (argv[arg], NULL, 16);
+
+			result = fpga_load (mezz, addr, size);
+			if (result == LOAD_SUCCESS) {
+				printf ("SUCCEEDED\n");
+				return 0;
+			} else if (result == LOAD_FAIL_NOINIT)
+				printf ("FAILED (no INIT)\n");
+			else
+				printf ("FAILED (no DONE)\n");
+			return 1;
+		}
+		break;
+
+	default:
+		break;
+	}
+
+	printf ("Usage:\n%s\n", cmdtp->usage);
+	return 1;
+}
+
+/* ------------------------------------------------------------------------- */
+int
+do_eecl (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+{
+	uchar data[HYMOD_EEPROM_SIZE];
+	uint offset;
+	int rcode = 0;
+
+	switch (argc) {
+
+	case 1:
+		offset = HYMOD_EEOFF_MAIN;
+		break;
+
+	case 2:
+		if (strcmp (argv[1], "main") == 0) {
+			offset = HYMOD_EEOFF_MAIN;
+			break;
+		}
+		if (strcmp (argv[1], "mezz") == 0) {
+			offset = HYMOD_EEOFF_MEZZ;
+			break;
+		}
+		/* fall through ... */
+
+	default:
+		printf ("Usage:\n%s\n", cmdtp->usage);
+		return 1;
+	}
+
+	memset (data, 0, HYMOD_EEPROM_SIZE);
+	if (i2c_write
+		(CFG_I2C_EEPROM_ADDR | offset, 0, CFG_I2C_EEPROM_ADDR_LEN, data,
+		 HYMOD_EEPROM_SIZE)) {
+		rcode = 1;
+	}
+
+	return rcode;
+}
+
+#endif							/* CFG_CMD_BSP */
+
+/* ------------------------------------------------------------------------- */
diff --git a/board/hymod/hymod.c b/board/hymod/hymod.c
new file mode 100644
index 0000000..829f254
--- /dev/null
+++ b/board/hymod/hymod.c
@@ -0,0 +1,802 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Hacked for the Hymod board by Murray.Jensen@cmst.csiro.au, 20-Oct-00
+ */
+
+#include <common.h>
+#include <mpc8260.h>
+#include <ioports.h>
+#include <i2c.h>
+#include <asm/iopin_8260.h>
+
+/* ------------------------------------------------------------------------- */
+
+/* imports from eeprom.c */
+extern int eeprom_load (unsigned, hymod_eeprom_t *);
+extern int eeprom_fetch (unsigned, char *, ulong);
+extern void eeprom_print (hymod_eeprom_t *);
+
+/* imports from fetch.c */
+extern int fetch_and_parse (char *, ulong, int (*)(uchar *, uchar *));
+
+/* imports from common/main.c */
+extern char console_buffer[CFG_CBSIZE];
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * I/O Port configuration table
+ *
+ * if conf is 1, then that port pin will be configured at boot time
+ * according to the five values podr/pdir/ppar/psor/pdat for that entry
+ */
+
+const iop_conf_t iop_conf_tab[4][32] = {
+
+	/* Port A configuration */
+	{							/*        conf ppar psor pdir podr pdat */
+									/* PA31 */ {1, 1, 1, 0, 0, 0},
+									/* FCC1 MII COL */
+									/* PA30 */ {1, 1, 1, 0, 0, 0},
+									/* FCC1 MII CRS */
+									/* PA29 */ {1, 1, 1, 1, 0, 0},
+									/* FCC1 MII TX_ER */
+									/* PA28 */ {1, 1, 1, 1, 0, 0},
+									/* FCC1 MII TX_EN */
+									/* PA27 */ {1, 1, 1, 0, 0, 0},
+									/* FCC1 MII RX_DV */
+									/* PA26 */ {1, 1, 1, 0, 0, 0},
+									/* FCC1 MII RX_ER */
+									/* PA25 */ {1, 0, 0, 1, 0, 0},
+									/* FCC2 MII MDIO */
+									/* PA24 */ {1, 0, 0, 1, 0, 0},
+									/* FCC2 MII MDC */
+									/* PA23 */ {1, 0, 0, 1, 0, 0},
+									/* FCC3 MII MDIO */
+									/* PA22 */ {1, 0, 0, 1, 0, 0},
+									/* FCC3 MII MDC */
+									/* PA21 */ {1, 1, 0, 1, 0, 0},
+									/* FCC1 MII TxD[3] */
+									/* PA20 */ {1, 1, 0, 1, 0, 0},
+									/* FCC1 MII TxD[2] */
+									/* PA19 */ {1, 1, 0, 1, 0, 0},
+									/* FCC1 MII TxD[1] */
+									/* PA18 */ {1, 1, 0, 1, 0, 0},
+									/* FCC1 MII TxD[0] */
+									/* PA17 */ {1, 1, 0, 0, 0, 0},
+									/* FCC1 MII RxD[3] */
+									/* PA16 */ {1, 1, 0, 0, 0, 0},
+									/* FCC1 MII RxD[2] */
+									/* PA15 */ {1, 1, 0, 0, 0, 0},
+									/* FCC1 MII RxD[1] */
+									/* PA14 */ {1, 1, 0, 0, 0, 0},
+									/* FCC1 MII RxD[0] */
+									/* PA13 */ {1, 0, 0, 1, 0, 0},
+									/* FCC1 MII MDIO */
+									/* PA12 */ {1, 0, 0, 1, 0, 0},
+									/* FCC1 MII MDC */
+									/* PA11 */ {1, 0, 0, 1, 0, 0},
+									/* SEL_CD */
+									/* PA10 */ {1, 0, 0, 0, 0, 0},
+									/* FLASH STS1 */
+									/* PA9  */ {1, 0, 0, 0, 0, 0},
+									/* FLASH STS0 */
+									/* PA8  */ {1, 0, 0, 0, 0, 0},
+									/* FLASH ~PE */
+									/* PA7  */ {1, 0, 0, 0, 0, 0},
+									/* WATCH ~HRESET */
+									/* PA6  */ {1, 0, 0, 0, 1, 0},
+									/* VC DONE */
+									/* PA5  */ {1, 0, 0, 1, 1, 0},
+									/* VC INIT */
+									/* PA4  */ {1, 0, 0, 1, 0, 0},
+									/* VC ~PROG */
+									/* PA3  */ {1, 0, 0, 1, 0, 0},
+									/* VM ENABLE */
+									/* PA2  */ {1, 0, 0, 0, 1, 0},
+									/* VM DONE */
+									/* PA1  */ {1, 0, 0, 1, 1, 0},
+									/* VM INIT */
+									/* PA0  */ {1, 0, 0, 1, 0, 0}
+									/* VM ~PROG */
+	 },
+
+	/* Port B configuration */
+	{							/*        conf ppar psor pdir podr pdat */
+									/* PB31 */ {1, 1, 0, 1, 0, 0},
+									/* FCC2 MII TX_ER */
+									/* PB30 */ {1, 1, 0, 0, 0, 0},
+									/* FCC2 MII RX_DV */
+									/* PB29 */ {1, 1, 1, 1, 0, 0},
+									/* FCC2 MII TX_EN */
+									/* PB28 */ {1, 1, 0, 0, 0, 0},
+									/* FCC2 MII RX_ER */
+									/* PB27 */ {1, 1, 0, 0, 0, 0},
+									/* FCC2 MII COL */
+									/* PB26 */ {1, 1, 0, 0, 0, 0},
+									/* FCC2 MII CRS */
+									/* PB25 */ {1, 1, 0, 1, 0, 0},
+									/* FCC2 MII TxD[3] */
+									/* PB24 */ {1, 1, 0, 1, 0, 0},
+									/* FCC2 MII TxD[2] */
+									/* PB23 */ {1, 1, 0, 1, 0, 0},
+									/* FCC2 MII TxD[1] */
+									/* PB22 */ {1, 1, 0, 1, 0, 0},
+									/* FCC2 MII TxD[0] */
+									/* PB21 */ {1, 1, 0, 0, 0, 0},
+									/* FCC2 MII RxD[0] */
+									/* PB20 */ {1, 1, 0, 0, 0, 0},
+									/* FCC2 MII RxD[1] */
+									/* PB19 */ {1, 1, 0, 0, 0, 0},
+									/* FCC2 MII RxD[2] */
+									/* PB18 */ {1, 1, 0, 0, 0, 0},
+									/* FCC2 MII RxD[3] */
+									/* PB17 */ {1, 1, 0, 0, 0, 0},
+									/* FCC3 MII RX_DV */
+									/* PB16 */ {1, 1, 0, 0, 0, 0},
+									/* FCC3 MII RX_ER */
+									/* PB15 */ {1, 1, 0, 1, 0, 0},
+									/* FCC3 MII TX_ER */
+									/* PB14 */ {1, 1, 0, 1, 0, 0},
+									/* FCC3 MII TX_EN */
+									/* PB13 */ {1, 1, 0, 0, 0, 0},
+									/* FCC3 MII COL */
+									/* PB12 */ {1, 1, 0, 0, 0, 0},
+									/* FCC3 MII CRS */
+									/* PB11 */ {1, 1, 0, 0, 0, 0},
+									/* FCC3 MII RxD[3] */
+									/* PB10 */ {1, 1, 0, 0, 0, 0},
+									/* FCC3 MII RxD[2] */
+									/* PB9  */ {1, 1, 0, 0, 0, 0},
+									/* FCC3 MII RxD[1] */
+									/* PB8  */ {1, 1, 0, 0, 0, 0},
+									/* FCC3 MII RxD[0] */
+									/* PB7  */ {1, 1, 0, 1, 0, 0},
+									/* FCC3 MII TxD[3] */
+									/* PB6  */ {1, 1, 0, 1, 0, 0},
+									/* FCC3 MII TxD[2] */
+									/* PB5  */ {1, 1, 0, 1, 0, 0},
+									/* FCC3 MII TxD[1] */
+									/* PB4  */ {1, 1, 0, 1, 0, 0},
+									/* FCC3 MII TxD[0] */
+									/* PB3  */ {0, 0, 0, 0, 0, 0},
+									/* pin doesn't exist */
+									/* PB2  */ {0, 0, 0, 0, 0, 0},
+									/* pin doesn't exist */
+									/* PB1  */ {0, 0, 0, 0, 0, 0},
+									/* pin doesn't exist */
+									/* PB0  */ {0, 0, 0, 0, 0, 0}
+									/* pin doesn't exist */
+	 },
+
+	/* Port C */
+	{							/*        conf ppar psor pdir podr pdat */
+									/* PC31 */ {1, 0, 0, 0, 0, 0},
+									/* MEZ ~IACK */
+	 /* PC30 */ {0, 0, 0, 0, 0, 0},
+									/* PC29 */ {1, 1, 0, 0, 0, 0},
+									/* CLK SCCx */
+									/* PC28 */ {1, 1, 0, 0, 0, 0},
+									/* CLK4 */
+									/* PC27 */ {1, 1, 0, 0, 0, 0},
+									/* CLK SCCF */
+									/* PC26 */ {1, 1, 0, 0, 0, 0},
+									/* CLK 32K */
+									/* PC25 */ {1, 1, 0, 0, 0, 0},
+									/* BRG4/CLK7 */
+	 /* PC24 */ {0, 0, 0, 0, 0, 0},
+									/* PC23 */ {1, 1, 0, 0, 0, 0},
+									/* CLK SCCx */
+									/* PC22 */ {1, 1, 0, 0, 0, 0},
+									/* FCC1 MII RX_CLK */
+									/* PC21 */ {1, 1, 0, 0, 0, 0},
+									/* FCC1 MII TX_CLK */
+									/* PC20 */ {1, 1, 0, 0, 0, 0},
+									/* CLK SCCF */
+									/* PC19 */ {1, 1, 0, 0, 0, 0},
+									/* FCC2 MII RX_CLK */
+									/* PC18 */ {1, 1, 0, 0, 0, 0},
+									/* FCC2 MII TX_CLK */
+									/* PC17 */ {1, 1, 0, 0, 0, 0},
+									/* FCC3 MII RX_CLK */
+									/* PC16 */ {1, 1, 0, 0, 0, 0},
+									/* FCC3 MII TX_CLK */
+									/* PC15 */ {1, 0, 0, 0, 0, 0},
+									/* SCC1 UART ~CTS */
+									/* PC14 */ {1, 0, 0, 0, 0, 0},
+									/* SCC1 UART ~CD */
+									/* PC13 */ {1, 0, 0, 0, 0, 0},
+									/* SCC2 UART ~CTS */
+									/* PC12 */ {1, 0, 0, 0, 0, 0},
+									/* SCC2 UART ~CD */
+									/* PC11 */ {1, 0, 0, 1, 0, 0},
+									/* SCC1 UART ~DTR */
+									/* PC10 */ {1, 0, 0, 1, 0, 0},
+									/* SCC1 UART ~DSR */
+									/* PC9  */ {1, 0, 0, 1, 0, 0},
+									/* SCC2 UART ~DTR */
+									/* PC8  */ {1, 0, 0, 1, 0, 0},
+									/* SCC2 UART ~DSR */
+									/* PC7  */ {1, 0, 0, 0, 0, 0},
+									/* TEMP ~ALERT */
+									/* PC6  */ {1, 0, 0, 0, 0, 0},
+									/* FCC3 INT */
+									/* PC5  */ {1, 0, 0, 0, 0, 0},
+									/* FCC2 INT */
+									/* PC4  */ {1, 0, 0, 0, 0, 0},
+									/* FCC1 INT */
+									/* PC3  */ {1, 1, 1, 1, 0, 0},
+									/* SDMA IDMA2 ~DACK */
+									/* PC2  */ {1, 1, 1, 0, 0, 0},
+									/* SDMA IDMA2 ~DONE */
+									/* PC1  */ {1, 1, 0, 0, 0, 0},
+									/* SDMA IDMA2 ~DREQ */
+									/* PC0  */ {1, 1, 0, 1, 0, 0}
+									/* BRG7 */
+	 },
+
+	/* Port D */
+	{							/*        conf ppar psor pdir podr pdat */
+									/* PD31 */ {1, 1, 0, 0, 0, 0},
+									/* SCC1 UART RxD */
+									/* PD30 */ {1, 1, 1, 1, 0, 0},
+									/* SCC1 UART TxD */
+									/* PD29 */ {1, 0, 0, 1, 0, 0},
+									/* SCC1 UART ~RTS */
+									/* PD28 */ {1, 1, 0, 0, 0, 0},
+									/* SCC2 UART RxD */
+									/* PD27 */ {1, 1, 0, 1, 0, 0},
+									/* SCC2 UART TxD */
+									/* PD26 */ {1, 0, 0, 1, 0, 0},
+									/* SCC2 UART ~RTS */
+									/* PD25 */ {1, 0, 0, 0, 0, 0},
+									/* SCC1 UART ~RI */
+									/* PD24 */ {1, 0, 0, 0, 0, 0},
+									/* SCC2 UART ~RI */
+									/* PD23 */ {1, 0, 0, 1, 0, 0},
+									/* CLKGEN PD */
+									/* PD22 */ {1, 0, 0, 0, 0, 0},
+									/* USER3 */
+									/* PD21 */ {1, 0, 0, 0, 0, 0},
+									/* USER2 */
+									/* PD20 */ {1, 0, 0, 0, 0, 0},
+									/* USER1 */
+									/* PD19 */ {1, 1, 1, 0, 0, 0},
+									/* SPI ~SEL */
+									/* PD18 */ {1, 1, 1, 0, 0, 0},
+									/* SPI CLK */
+									/* PD17 */ {1, 1, 1, 0, 0, 0},
+									/* SPI MOSI */
+									/* PD16 */ {1, 1, 1, 0, 0, 0},
+									/* SPI MISO */
+									/* PD15 */ {1, 1, 1, 0, 1, 0},
+									/* I2C SDA */
+									/* PD14 */ {1, 1, 1, 0, 1, 0},
+									/* I2C SCL */
+									/* PD13 */ {1, 0, 0, 1, 0, 1},
+									/* TEMP ~STDBY */
+									/* PD12 */ {1, 0, 0, 1, 0, 1},
+									/* FCC3 ~RESET */
+									/* PD11 */ {1, 0, 0, 1, 0, 1},
+									/* FCC2 ~RESET */
+									/* PD10 */ {1, 0, 0, 1, 0, 1},
+									/* FCC1 ~RESET */
+									/* PD9  */ {1, 0, 0, 0, 0, 0},
+									/* PD9 */
+									/* PD8  */ {1, 0, 0, 0, 0, 0},
+									/* PD8 */
+									/* PD7  */ {1, 0, 0, 1, 0, 1},
+									/* PD7 */
+									/* PD6  */ {1, 0, 0, 1, 0, 1},
+									/* PD6 */
+									/* PD5  */ {1, 0, 0, 1, 0, 1},
+									/* PD5 */
+									/* PD4  */ {1, 0, 0, 1, 0, 1},
+									/* PD4 */
+									/* PD3  */ {0, 0, 0, 0, 0, 0},
+									/* pin doesn't exist */
+									/* PD2  */ {0, 0, 0, 0, 0, 0},
+									/* pin doesn't exist */
+									/* PD1  */ {0, 0, 0, 0, 0, 0},
+									/* pin doesn't exist */
+									/* PD0  */ {0, 0, 0, 0, 0, 0}
+									/* pin doesn't exist */
+	 }
+};
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * AMI FS6377 Clock Generator configuration table
+ *
+ * the "fs6377_regs[]" table entries correspond to FS6377 registers
+ * 0 - 15 (total of 16 bytes).
+ *
+ * the data is written to the FS6377 via the i2c bus using address in
+ * "fs6377_addr" (address is 7 bits - R/W bit not included).
+ */
+
+uchar fs6377_addr = 0x5c;
+
+uchar fs6377_regs[16] = {
+	12, 75, 64, 25, 144, 128, 25, 192,
+	0, 16, 135, 192, 224, 64, 64, 192
+};
+
+iopin_t pa11 = { IOPIN_PORTA, 11, 0 };
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * special board initialisation, after clocks and timebase have been
+ * set up but before environment and serial are initialised.
+ *
+ * added so that very early initialisations can be done using the i2c
+ * driver (which requires the clocks, to calculate the dividers, and
+ * the timebase, for udelay())
+ */
+
+int board_postclk_init (void)
+{
+	i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
+
+	/*
+	 * Initialise the FS6377 clock chip
+	 *
+	 * the secondary address is the register number from where to
+	 * start the write - I want to write all the registers
+	 *
+	 * don't bother checking return status - we have no console yet
+	 * to print it on, nor any RAM to store it in - it will be obvious
+	 * if this doesn't work
+	 */
+	(void) i2c_write (fs6377_addr, 0, 1, fs6377_regs,
+					  sizeof (fs6377_regs));
+
+	return (0);
+}
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * Check Board Identity: Hardwired to HYMOD
+ */
+
+int checkboard (void)
+{
+	puts ("Board: HYMOD\n");
+	return (0);
+}
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * miscellaneous (early - while running in flash) initialisations.
+ */
+
+#define _NOT_USED_	0xFFFFFFFF
+
+uint upmb_table[] = {
+	/* Read Single Beat (RSS) - offset 0x00 */
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	/* Read Burst (RBS) - offset 0x08 */
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	/* Write Single Beat (WSS) - offset 0x18 */
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	/* Write Burst (WSS) - offset 0x20 */
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	/* Refresh Timer (PTS) - offset 0x30 */
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	/* Exception Condition (EXS) - offset 0x3c */
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_
+};
+
+uint upmc_table[] = {
+	/* Read Single Beat (RSS) - offset 0x00 */
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	/* Read Burst (RBS) - offset 0x08 */
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	/* Write Single Beat (WSS) - offset 0x18 */
+	0xF0E00000, 0xF0A00000, 0x00A00000, 0x30A00000,
+	0xF0F40007, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	/* Write Burst (WSS) - offset 0x20 */
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	/* Refresh Timer (PTS) - offset 0x30 */
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	/* Exception Condition (EXS) - offset 0x3c */
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_
+};
+
+int misc_init_f (void)
+{
+	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile memctl8260_t *memctl = &immap->im_memctl;
+
+	printf ("UPMs:  ");
+
+	upmconfig (UPMB, upmb_table, sizeof upmb_table / sizeof upmb_table[0]);
+	memctl->memc_mbmr = CFG_MBMR;
+
+	upmconfig (UPMC, upmc_table, sizeof upmc_table / sizeof upmc_table[0]);
+	memctl->memc_mcmr = CFG_MCMR;
+
+	printf ("configured\n");
+	return (0);
+}
+
+/* ------------------------------------------------------------------------- */
+
+long initdram (int board_type)
+{
+	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile memctl8260_t *memctl = &immap->im_memctl;
+	volatile uchar c = 0, *ramaddr = (uchar *) (CFG_SDRAM_BASE + 0x8);
+	ulong psdmr = CFG_PSDMR;
+	int i;
+
+	/*
+	 * Quote from 8260 UM (10.4.2 SDRAM Power-On Initialization, 10-35):
+	 *
+	 * "At system reset, initialization software must set up the
+	 *  programmable parameters in the memory controller banks registers
+	 *  (ORx, BRx, P/LSDMR). After all memory parameters are conÞgured,
+	 *  system software should execute the following initialization sequence
+	 *  for each SDRAM device.
+	 *
+	 *  1. Issue a PRECHARGE-ALL-BANKS command
+	 *  2. Issue eight CBR REFRESH commands
+	 *  3. Issue a MODE-SET command to initialize the mode register
+	 *
+	 *  The initial commands are executed by setting P/LSDMR[OP] and
+	 *  accessing the SDRAM with a single-byte transaction."
+	 *
+	 * The appropriate BRx/ORx registers have already been set when we
+	 * get here. The SDRAM can be accessed at the address CFG_SDRAM_BASE.
+	 */
+
+	memctl->memc_psrt = CFG_PSRT;
+	memctl->memc_mptpr = CFG_MPTPR;
+
+	memctl->memc_psdmr = psdmr | PSDMR_OP_PREA;
+	*ramaddr = c;
+
+	memctl->memc_psdmr = psdmr | PSDMR_OP_CBRR;
+	for (i = 0; i < 8; i++)
+		*ramaddr = c;
+
+	memctl->memc_psdmr = psdmr | PSDMR_OP_MRW;
+	*ramaddr = c;
+
+	memctl->memc_psdmr = psdmr | PSDMR_OP_NORM | PSDMR_RFEN;
+	*ramaddr = c;
+
+	return (CFG_SDRAM_SIZE << 20);
+}
+
+/* ------------------------------------------------------------------------- */
+/* miscellaneous initialisations after relocation into ram (misc_init_r)     */
+/* 									     */
+/* loads the data in the main board and mezzanine board eeproms into	     */
+/* the hymod configuration struct stored in the board information area.	     */
+/* 									     */
+/* if the contents of either eeprom is invalid, prompts for a serial	     */
+/* number (and an ethernet address if required) then fetches a file	     */
+/* containing information to be stored in the eeprom from the tftp server    */
+/* (the file name is based on the serial number and a built-in path)	     */
+
+/* these are relative to the root of the server's tftp directory */
+static char *bddb_cfgdir = "/hymod/bddb";
+static char *global_env_path = "/hymod/global_env";
+
+static ulong get_serno (const char *prompt)
+{
+	for (;;) {
+		int n;
+		char *p;
+		ulong serno;
+
+		n = readline (prompt);
+
+		if (n < 0)
+			return (0);
+
+		if (n == 0)
+			continue;
+
+		serno = simple_strtol (console_buffer, &p, 10);
+
+		if (p > console_buffer && *p == '\0')
+			return (serno);
+
+		printf ("Invalid number (%s) - please re-enter\n", console_buffer);
+	}
+}
+
+static int read_eeprom (char *label, unsigned offset, hymod_eeprom_t * ep)
+{
+	char filename[50], prompt[50];
+	ulong serno;
+	int count = 0;
+
+	sprintf (prompt, "Enter %s board serial number: ", label);
+
+	for (;;) {
+
+		if (eeprom_load (offset, ep))
+			return (1);
+
+		printf ("*** %s board EEPROM contents are %sinvalid\n",
+				label, count == 0 ? "" : "STILL ");
+
+		puts ("*** will attempt to fetch from server (Ctrl-C to abort)\n");
+
+		if ((serno = get_serno (prompt)) == 0) {
+			puts ("\n*** interrupted! - ignoring eeprom contents\n");
+			return (0);
+		}
+
+		sprintf (filename, "%s/%010lu.cfg", bddb_cfgdir, serno);
+
+		printf ("*** fetching %s board EEPROM contents from server\n",
+				label);
+
+		if (eeprom_fetch (offset, filename, 0x100000) == 0) {
+			puts ("*** fetch failed - ignoring eeprom contents\n");
+			return (0);
+		}
+
+		count++;
+	}
+}
+
+static ulong main_serno;
+
+static int env_fetch_callback (uchar * name, uchar * value)
+{
+	char *ov, nv[CFG_CBSIZE], *p, *q, *nn;
+	int override = 1, append = 0, nl;
+
+	nn = name;
+	if (*nn == '-') {
+		override = 0;
+		nn++;
+	}
+
+	if ((nl = strlen (nn)) > 0 && nn[nl - 1] == '+') {
+		append = 1;
+		nn[--nl] = '\0';
+	}
+
+	p = value;
+	q = nv;
+
+	while ((*q = *p++) != '\0')
+		if (*q == '%') {
+			switch (*p++) {
+
+			case '\0':			/* whoops - back up */
+				p--;
+				break;
+
+			case '%':			/* a single percent character */
+				q++;
+				break;
+
+			case 's':			/* main board serial number as string */
+				q += sprintf (q, "%010lu", main_serno);
+				break;
+
+			case 'S':			/* main board serial number as number */
+				q += sprintf (q, "%lu", main_serno);
+				break;
+
+			default:			/* ignore any others */
+				break;
+			}
+		} else
+			q++;
+
+	if ((ov = getenv (nn)) != NULL) {
+
+		if (append) {
+
+			if (strstr (ov, nv) == NULL) {
+				int ovl, nvl;
+
+				printf ("Appending '%s' to env cmd '%s'\n", nv, nn);
+
+				ovl = strlen (ov);
+				nvl = strlen (nv);
+
+				while (nvl >= 0) {
+					nv[ovl + 1 + nvl] = nv[nvl];
+					nvl--;
+				}
+
+				nv[ovl] = ' ';
+
+				while (--ovl >= 0)
+					nv[ovl] = ov[ovl];
+
+				setenv (nn, nv);
+			}
+
+			return (1);
+		}
+
+		if (!override || strcmp (ov, nv) == 0)
+			return (1);
+
+		printf ("Re-setting env cmd '%s' from '%s' to '%s'\n", nn, ov, nv);
+	} else
+		printf ("Setting env cmd '%s' to '%s'\n", nn, nv);
+
+	setenv (nn, nv);
+	return (1);
+}
+
+int misc_init_r (void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	hymod_conf_t *cp = &gd->bd->bi_hymod_conf;
+	int rc;
+
+	memset ((void *) cp, 0, sizeof (*cp));
+
+	/* set up main board config info */
+
+	if (i2c_probe (CFG_I2C_EEPROM_ADDR | HYMOD_EEOFF_MAIN)) {
+
+		if (read_eeprom
+			("main", HYMOD_EEOFF_MAIN << 8, &cp->main.eeprom))
+			cp->main.eeprom_valid = 1;
+
+		puts ("EEPROM:main...");
+
+		if (cp->main.eeprom_valid) {
+			printf ("OK (ver %u)\n", cp->main.eeprom.ver);
+			eeprom_print (&cp->main.eeprom);
+			main_serno = cp->main.eeprom.serno;
+		} else
+			puts ("BAD\n");
+
+		cp->main.mmap[0].prog.exists = 1;
+		cp->main.mmap[0].prog.size = FPGA_MAIN_CFG_SIZE;
+		cp->main.mmap[0].prog.base = FPGA_MAIN_CFG_BASE;
+
+		cp->main.mmap[0].reg.exists = 1;
+		cp->main.mmap[0].reg.size = FPGA_MAIN_REG_SIZE;
+		cp->main.mmap[0].reg.base = FPGA_MAIN_REG_BASE;
+
+		cp->main.mmap[0].port.exists = 1;
+		cp->main.mmap[0].port.size = FPGA_MAIN_PORT_SIZE;
+		cp->main.mmap[0].port.base = FPGA_MAIN_PORT_BASE;
+
+		cp->main.iopins[0].prog_pin.port = FPGA_MAIN_PROG_PORT;
+		cp->main.iopins[0].prog_pin.pin = FPGA_MAIN_PROG_PIN;
+		cp->main.iopins[0].prog_pin.flag = 1;
+		cp->main.iopins[0].init_pin.port = FPGA_MAIN_INIT_PORT;
+		cp->main.iopins[0].init_pin.pin = FPGA_MAIN_INIT_PIN;
+		cp->main.iopins[0].init_pin.flag = 1;
+		cp->main.iopins[0].done_pin.port = FPGA_MAIN_DONE_PORT;
+		cp->main.iopins[0].done_pin.pin = FPGA_MAIN_DONE_PIN;
+		cp->main.iopins[0].done_pin.flag = 1;
+#ifdef FPGA_MAIN_ENABLE_PORT
+		cp->main.iopins[0].enable_pin.port = FPGA_MAIN_ENABLE_PORT;
+		cp->main.iopins[0].enable_pin.pin = FPGA_MAIN_ENABLE_PIN;
+		cp->main.iopins[0].enable_pin.flag = 1;
+#endif
+	} else
+		puts ("EEPROM:main...NOT PRESENT\n");
+
+	/* set up mezzanine board config info */
+
+	if (i2c_probe (CFG_I2C_EEPROM_ADDR | HYMOD_EEOFF_MEZZ)) {
+
+		if (read_eeprom
+			("mezz", HYMOD_EEOFF_MEZZ << 8, &cp->mezz.eeprom))
+			cp->mezz.eeprom_valid = 1;
+
+		puts ("EEPROM:mezz...");
+
+		if (cp->mezz.eeprom_valid) {
+			printf ("OK (ver %u)\n", cp->mezz.eeprom.ver);
+			eeprom_print (&cp->mezz.eeprom);
+		} else
+			puts ("BAD\n");
+
+		cp->mezz.mmap[0].prog.exists = 1;
+		cp->mezz.mmap[0].prog.size = FPGA_MEZZ_CFG_SIZE;
+		cp->mezz.mmap[0].prog.base = FPGA_MEZZ_CFG_BASE;
+
+		cp->mezz.mmap[0].reg.exists = 0;
+
+		cp->mezz.mmap[0].port.exists = 0;
+
+		cp->mezz.iopins[0].prog_pin.port = FPGA_MEZZ_PROG_PORT;
+		cp->mezz.iopins[0].prog_pin.pin = FPGA_MEZZ_PROG_PIN;
+		cp->mezz.iopins[0].prog_pin.flag = 1;
+		cp->mezz.iopins[0].init_pin.port = FPGA_MEZZ_INIT_PORT;
+		cp->mezz.iopins[0].init_pin.pin = FPGA_MEZZ_INIT_PIN;
+		cp->mezz.iopins[0].init_pin.flag = 1;
+		cp->mezz.iopins[0].done_pin.port = FPGA_MEZZ_DONE_PORT;
+		cp->mezz.iopins[0].done_pin.pin = FPGA_MEZZ_DONE_PIN;
+		cp->mezz.iopins[0].done_pin.flag = 1;
+#ifdef FPGA_MEZZ_ENABLE_PORT
+		cp->mezz.iopins[0].enable_pin.port = FPGA_MEZZ_ENABLE_PORT;
+		cp->mezz.iopins[0].enable_pin.pin = FPGA_MEZZ_ENABLE_PIN;
+		cp->mezz.iopins[0].enable_pin.flag = 1;
+#endif
+
+		if (cp->mezz.eeprom_valid &&
+			cp->mezz.eeprom.bdtype == HYMOD_BDTYPE_DISPLAY) {
+			/*
+			 * mezzanine board is a display board - switch the SEL_CD
+			 * input of the FS6377 clock generator (via I/O Port Pin PA11) to
+			 * high (or 1) to select the 27MHz required by the display board
+			 */
+			iopin_set_high (&pa11);
+
+			puts ("SEL_CD:toggled for display board\n");
+		}
+	} else
+		puts ("EEPROM:mezz...NOT PRESENT\n");
+
+	cp->crc =
+			crc32 (0, (unsigned char *) cp, offsetof (hymod_conf_t, crc));
+
+	if (getenv ("global_env_loaded") == NULL) {
+
+		puts ("*** global environment has not been loaded\n");
+		puts ("*** fetching from server (Control-C to Abort)\n");
+
+		rc = fetch_and_parse (global_env_path, 0x100000,
+							  env_fetch_callback);
+
+		if (rc == 0)
+			puts ("*** Fetch of environment failed!\n");
+		else
+			setenv ("global_env_loaded", "yes");
+	}
+	return (0);
+}
diff --git a/board/icu862/icu862.c b/board/icu862/icu862.c
new file mode 100644
index 0000000..cea28b2
--- /dev/null
+++ b/board/icu862/icu862.c
@@ -0,0 +1,246 @@
+/*
+ * (C) Copyright 2001
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <config.h>
+#include <mpc8xx.h>
+
+/*
+ *  Memory Controller Using
+ *
+ *  CS0 - Flash memory            (0x40000000)
+ *  CS1 - SDRAM                   (0x00000000}
+ *  CS2 - S/UNI Ultra ATM155
+ *  CS3 - IDT 77106 ATM25
+ *  CS4 - DSP HPI
+ *  CS5 - E1/T1 Interface device
+ *  CS6 - PCMCIA device
+ *  CS7 - PCMCIA device
+ */
+
+/* ------------------------------------------------------------------------- */
+
+#define _not_used_	0xffffffff
+
+const uint sdram_table[] = {
+	/* single read. (offset 0 in upm RAM) */
+	0x1f07fc04, 0xeeaefc04, 0x11adfc04, 0xefbbbc00,
+	0x1ff77c47,
+
+	/* MRS initialization (offset 5) */
+
+	0x1ff77c34, 0xefeabc34, 0x1fb57c35,
+
+	/* burst read. (offset 8 in upm RAM) */
+	0x1f07fc04, 0xeeaefc04, 0x10adfc04, 0xf0affc00,
+	0xf0affc00, 0xf1affc00, 0xefbbbc00, 0x1ff77c47,
+	_not_used_, _not_used_, _not_used_, _not_used_,
+	_not_used_, _not_used_, _not_used_, _not_used_,
+
+	/* single write. (offset 18 in upm RAM) */
+	0x1f27fc04, 0xeeaebc00, 0x01b93c04, 0x1ff77c47,
+	_not_used_, _not_used_, _not_used_, _not_used_,
+
+	/* burst write. (offset 20 in upm RAM) */
+	0x1f07fc04, 0xeeaebc00, 0x10ad7c00, 0xf0affc00,
+	0xf0affc00, 0xe1bbbc04, 0x1ff77c47, _not_used_,
+	_not_used_, _not_used_, _not_used_, _not_used_,
+	_not_used_, _not_used_, _not_used_, _not_used_,
+
+	/* refresh. (offset 30 in upm RAM) */
+	0x1ff5fc84, 0xfffffc04, 0xfffffc04, 0xfffffc04,
+	0xfffffc84, 0xfffffc07, _not_used_, _not_used_,
+	_not_used_, _not_used_, _not_used_, _not_used_,
+
+	/* exception. (offset 3c in upm RAM) */
+	0x7ffffc07, _not_used_, _not_used_, _not_used_
+};
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * Check Board Identity:
+ */
+
+int checkboard (void)
+{
+	puts ("Board: ICU862 Board\n");
+	return 0;
+}
+
+/* ------------------------------------------------------------------------- */
+
+static long int dram_size (long int, long int *, long int);
+
+/* ------------------------------------------------------------------------- */
+
+long int initdram (int board_type)
+{
+	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile memctl8xx_t *memctl = &immap->im_memctl;
+	long int size8, size9;
+	long int size_b0 = 0;
+	unsigned long reg;
+
+	upmconfig (UPMA, (uint *) sdram_table,
+			   sizeof (sdram_table) / sizeof (uint));
+
+	/*
+	 * Preliminary prescaler for refresh (depends on number of
+	 * banks): This value is selected for four cycles every 62.4 us
+	 * with two SDRAM banks or four cycles every 31.2 us with one
+	 * bank. It will be adjusted after memory sizing.
+	 */
+	memctl->memc_mptpr = CFG_MPTPR_2BK_8K;
+
+	memctl->memc_mar = 0x00000088;
+
+	/*
+	 * Map controller bank 1 to the SDRAM bank at
+	 * preliminary address - these have to be modified after the
+	 * SDRAM size has been determined.
+	 */
+	memctl->memc_or1 = CFG_OR1_PRELIM;
+	memctl->memc_br1 = CFG_BR1_PRELIM;
+
+	memctl->memc_mamr = CFG_MAMR_8COL & (~(MAMR_PTAE));	/* no refresh yet */
+
+	udelay (200);
+
+	/* perform SDRAM initializsation sequence */
+
+	memctl->memc_mcr = 0x80002105;	/* SDRAM bank 0 */
+	udelay (200);
+	memctl->memc_mcr = 0x80002230;	/* SDRAM bank 0 - execute twice */
+	udelay (200);
+
+	memctl->memc_mamr |= MAMR_PTAE;	/* enable refresh */
+
+	udelay (1000);
+
+	/*
+	 * Check Bank 0 Memory Size for re-configuration
+	 *
+	 * try 8 column mode
+	 */
+	size8 = dram_size (CFG_MAMR_8COL, (ulong *) SDRAM_BASE1_PRELIM,
+					   SDRAM_MAX_SIZE);
+
+	udelay (1000);
+
+	/*
+	 * try 9 column mode
+	 */
+	size9 = dram_size (CFG_MAMR_9COL, (ulong *) SDRAM_BASE1_PRELIM,
+					   SDRAM_MAX_SIZE);
+
+	if (size8 < size9) {		/* leave configuration at 9 columns */
+		size_b0 = size9;
+/*	debug ("SDRAM Bank 0 in 9 column mode: %ld MB\n", size >> 20);	*/
+	} else {					/* back to 8 columns            */
+		size_b0 = size8;
+		memctl->memc_mamr = CFG_MAMR_8COL;
+		udelay (500);
+/*	debug ("SDRAM Bank 0 in 8 column mode: %ld MB\n", size >> 20);	*/
+	}
+
+	udelay (1000);
+
+	/*
+	 * Adjust refresh rate depending on SDRAM type, both banks
+	 * For types > 128 MBit leave it at the current (fast) rate
+	 */
+	if ((size_b0 < 0x02000000)) {
+		/* reduce to 15.6 us (62.4 us / quad) */
+		memctl->memc_mptpr = CFG_MPTPR_2BK_4K;
+		udelay (1000);
+	}
+
+	/*
+	 * Final mapping
+	 */
+
+	memctl->memc_or1 = ((-size_b0) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM;
+	memctl->memc_br1 = (CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
+
+	/* adjust refresh rate depending on SDRAM type, one bank */
+	reg = memctl->memc_mptpr;
+	reg >>= 1;					/* reduce to CFG_MPTPR_1BK_8K / _4K */
+	memctl->memc_mptpr = reg;
+
+	udelay (10000);
+
+	return (size_b0);
+}
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * Check memory range for valid RAM. A simple memory test determines
+ * the actually available RAM size between addresses `base' and
+ * `base + maxsize'. Some (not all) hardware errors are detected:
+ * - short between address lines
+ * - short between data lines
+ */
+
+static long int dram_size (long int mamr_value, long int *base,
+						   long int maxsize)
+{
+	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile memctl8xx_t *memctl = &immap->im_memctl;
+	volatile long int *addr;
+	ulong cnt, val;
+	ulong save[32];				/* to make test non-destructive */
+	unsigned char i = 0;
+
+	memctl->memc_mamr = mamr_value;
+
+	for (cnt = maxsize / sizeof (long); cnt > 0; cnt >>= 1) {
+		addr = base + cnt;		/* pointer arith! */
+
+		save[i++] = *addr;
+		*addr = ~cnt;
+	}
+
+	/* write 0 to base address */
+	addr = base;
+	save[i] = *addr;
+	*addr = 0;
+
+	/* check at base address */
+	if ((val = *addr) != 0) {
+		*addr = save[i];
+		return (0);
+	}
+
+	for (cnt = 1; cnt <= maxsize / sizeof (long); cnt <<= 1) {
+		addr = base + cnt;		/* pointer arith! */
+		val = *addr;
+		*addr = save[--i];
+
+		if (val != (~cnt)) {
+			return (cnt * sizeof (long));
+		}
+	}
+	return (maxsize);
+}
diff --git a/board/ip860/ip860.c b/board/ip860/ip860.c
new file mode 100644
index 0000000..11f3327
--- /dev/null
+++ b/board/ip860/ip860.c
@@ -0,0 +1,293 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <commproc.h>
+#include <mpc8xx.h>
+
+/* ------------------------------------------------------------------------- */
+
+static long int dram_size (long int, long int *, long int);
+
+/* ------------------------------------------------------------------------- */
+
+#define	_NOT_USED_	0xFFFFFFFF
+
+const uint sdram_table[] = {
+	/*
+	 * Single Read. (Offset 0 in UPMA RAM)
+	 */
+	0x1f07fc04, 0xeeaefc04, 0x11adfc04, 0xefbbbc00,
+	0x1ff77c47,					/* last */
+	/*
+	 * SDRAM Initialization (offset 5 in UPMA RAM)
+	 *
+	 * This is no UPM entry point. The following definition uses
+	 * the remaining space to establish an initialization
+	 * sequence, which is executed by a RUN command.
+	 *
+	 */
+	0x1ff77c34, 0xefeabc34, 0x1fb57c35,	/* last */
+	/*
+	 * Burst Read. (Offset 8 in UPMA RAM)
+	 */
+	0x1f07fc04, 0xeeaefc04, 0x10adfc04, 0xf0affc00,
+	0xf0affc00, 0xf1affc00, 0xefbbbc00, 0x1ff77c47,	/* last */
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	/*
+	 * Single Write. (Offset 18 in UPMA RAM)
+	 */
+	0x1f27fc04, 0xeeaebc00, 0x01b93c04, 0x1ff77c47,	/* last */
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	/*
+	 * Burst Write. (Offset 20 in UPMA RAM)
+	 */
+	0x1f07fc04, 0xeeaebc00, 0x10ad7c00, 0xf0affc00,
+	0xf0affc00, 0xe1bbbc04, 0x1ff77c47,	/* last */
+	_NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	/*
+	 * Refresh  (Offset 30 in UPMA RAM)
+	 */
+	0x1ff5fc84, 0xfffffc04, 0xfffffc04, 0xfffffc04,
+	0xfffffc84, 0xfffffc07,		/* last */
+	_NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	/*
+	 * Exception. (Offset 3c in UPMA RAM)
+	 */
+	0x7ffffc07,					/* last */
+	_NOT_USED_, _NOT_USED_, _NOT_USED_,
+};
+
+/* ------------------------------------------------------------------------- */
+
+
+/*
+ * Check Board Identity:
+ *
+ * Test ID string (IP860...)
+ */
+
+int checkboard (void)
+{
+	unsigned char *s, *e;
+	unsigned char buf[64];
+	int i;
+
+	puts ("Board: ");
+
+	i = getenv_r ("serial#", buf, sizeof (buf));
+	s = (i > 0) ? buf : NULL;
+
+	if (!s || strncmp (s, "IP860", 5)) {
+		puts ("### No HW ID - assuming IP860");
+	} else {
+		for (e = s; *e; ++e) {
+			if (*e == ' ')
+				break;
+		}
+
+		for (; s < e; ++s) {
+			putc (*s);
+		}
+	}
+
+	putc ('\n');
+
+	return (0);
+}
+
+/* ------------------------------------------------------------------------- */
+
+long int initdram (int board_type)
+{
+	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile memctl8xx_t *memctl = &immap->im_memctl;
+	long int size;
+
+	upmconfig (UPMA, (uint *) sdram_table,
+			   sizeof (sdram_table) / sizeof (uint));
+
+	/*
+	 * Preliminary prescaler for refresh
+	 */
+	memctl->memc_mptpr = 0x0400;
+
+	memctl->memc_mar = 0x00000088;
+
+	/*
+	 * Map controller banks 2 to the SDRAM address
+	 */
+	memctl->memc_or2 = CFG_OR2;
+	memctl->memc_br2 = CFG_BR2;
+
+	/* IP860 boards have only one bank SDRAM */
+
+
+	udelay (200);
+
+	/* perform SDRAM initializsation sequence */
+
+	memctl->memc_mamr = 0xC3804114;
+	memctl->memc_mcr = 0x80004105;	/* run precharge pattern from loc 5 */
+	udelay (1);
+	memctl->memc_mamr = 0xC3804118;
+	memctl->memc_mcr = 0x80004130;	/* run refresh pattern 8 times */
+
+	udelay (1000);
+
+	/*
+	 * Check SDRAM Memory Size
+	 */
+	size = dram_size (CFG_MAMR, (ulong *) SDRAM_BASE, SDRAM_MAX_SIZE);
+
+	udelay (1000);
+
+	memctl->memc_or2 = ((-size) & 0xFFFF0000) | SDRAM_TIMING;
+	memctl->memc_br2 = (CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
+
+	udelay (10000);
+
+	/*
+	 * Also, map other memory to correct position
+	 */
+
+#if (defined(CFG_OR1) && defined(CFG_BR1_PRELIM))
+	memctl->memc_or1 = CFG_OR1;
+	memctl->memc_br1 = CFG_BR1;
+#endif
+
+#if defined(CFG_OR3) && defined(CFG_BR3)
+	memctl->memc_or3 = CFG_OR3;
+	memctl->memc_br3 = CFG_BR3;
+#endif
+
+#if defined(CFG_OR4) && defined(CFG_BR4)
+	memctl->memc_or4 = CFG_OR4;
+	memctl->memc_br4 = CFG_BR4;
+#endif
+
+#if defined(CFG_OR5) && defined(CFG_BR5)
+	memctl->memc_or5 = CFG_OR5;
+	memctl->memc_br5 = CFG_BR5;
+#endif
+
+#if defined(CFG_OR6) && defined(CFG_BR6)
+	memctl->memc_or6 = CFG_OR6;
+	memctl->memc_br6 = CFG_BR6;
+#endif
+
+#if defined(CFG_OR7) && defined(CFG_BR7)
+	memctl->memc_or7 = CFG_OR7;
+	memctl->memc_br7 = CFG_BR7;
+#endif
+
+	return (size);
+}
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * Check memory range for valid RAM. A simple memory test determines
+ * the actually available RAM size between addresses `base' and
+ * `base + maxsize'. Some (not all) hardware errors are detected:
+ * - short between address lines
+ * - short between data lines
+ */
+
+static long int dram_size (long int mamr_value, long int *base,
+						   long int maxsize)
+{
+	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile memctl8xx_t *memctl = &immap->im_memctl;
+	volatile long int *addr;
+	ulong cnt, val;
+	ulong save[32];				/* to make test non-destructive */
+	unsigned char i = 0;
+
+	memctl->memc_mamr = mamr_value;
+
+	for (cnt = maxsize / sizeof (long); cnt > 0; cnt >>= 1) {
+		addr = base + cnt;		/* pointer arith! */
+
+		save[i++] = *addr;
+		*addr = ~cnt;
+	}
+
+	/* write 0 to base address */
+	addr = base;
+	save[i] = *addr;
+	*addr = 0;
+
+	/* check at base address */
+	if ((val = *addr) != 0) {
+		*addr = save[i];
+		return (0);
+	}
+
+	for (cnt = 1; cnt <= maxsize / sizeof (long); cnt <<= 1) {
+		addr = base + cnt;		/* pointer arith! */
+
+		val = *addr;
+		*addr = save[--i];
+
+		if (val != (~cnt)) {
+			return (cnt * sizeof (long));
+		}
+	}
+	return (maxsize);
+}
+
+/* ------------------------------------------------------------------------- */
+
+void reset_phy (void)
+{
+	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+	ulong mask = PB_ENET_RESET | PB_ENET_JABD;
+	ulong reg;
+
+	/* Make sure PHY is not in low-power mode */
+	immr->im_cpm.cp_pbpar &= ~(mask);	/* GPIO */
+	immr->im_cpm.cp_pbodr &= ~(mask);	/* active output */
+
+	/* Set  JABD low  (no JABber Disable),
+	 * and RESET high (Reset PHY)
+	 */
+	reg = immr->im_cpm.cp_pbdat;
+	reg = (reg & ~PB_ENET_JABD) | PB_ENET_RESET;
+	immr->im_cpm.cp_pbdat = reg;
+
+	/* now drive outputs */
+	immr->im_cpm.cp_pbdir |= mask;	/* output */
+	udelay (1000);
+	/*
+	   * Release RESET signal
+	 */
+	immr->im_cpm.cp_pbdat &= ~(PB_ENET_RESET);
+	udelay (1000);
+}
+
+/* ------------------------------------------------------------------------- */
diff --git a/board/iphase4539/iphase4539.c b/board/iphase4539/iphase4539.c
new file mode 100644
index 0000000..45f3dad
--- /dev/null
+++ b/board/iphase4539/iphase4539.c
@@ -0,0 +1,458 @@
+/*
+ * (C) Copyright 2002 Wolfgang Grandegger <wg@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <ioports.h>
+#include <mpc8260.h>
+#include <asm/io.h>
+#include <asm/immap_8260.h>
+
+int hwc_flash_size (void);
+int hwc_local_sdram_size (void);
+int hwc_main_sdram_size (void);
+int hwc_serial_number (void);
+int hwc_mac_address (char *str);
+int hwc_manufact_date (char *str);
+int seeprom_read (int addr, uchar * data, int size);
+
+/*
+ * I/O Port configuration table
+ *
+ * if conf is 1, then that port pin will be configured at boot time
+ * according to the five values podr/pdir/ppar/psor/pdat for that entry
+ *
+ * The port definitions are taken from the old firmware (see
+ * also SYS/H/4539.H):
+ *
+ *        ppar      psor        pdir       podr       pdat
+ * PA: 0x02ffffff 0x02c00000 0xfc403fe6 0x00000000 0x02403fc0
+ * PB: 0x0fffdeb0 0x000000b0 0x0f032347 0x00000000 0x0f000290
+ * PC: 0x030ffa55 0x030f0040 0xbcf005ea 0x00000000 0xc0c0ba7d
+ * PD: 0x09c04e3c 0x01000e3c 0x0a7ff1c3 0x00000000 0x00ce0ae9
+ */
+const iop_conf_t iop_conf_tab[4][32] = {
+
+	/* Port A configuration */
+	{							/* conf ppar psor pdir podr pdat */
+	 {0, 1, 0, 0, 0, 0},		/* PA31 FCC1_TXENB  SLAVE */
+	 {0, 1, 0, 1, 0, 0},		/* PA30 FCC1_TXCLAV SLAVE */
+	 {0, 1, 0, 1, 0, 0},		/* PA29 FCC1_TXSOC */
+	 {0, 1, 0, 0, 0, 0},		/* PA28 FCC1_RXENB  SLAVE */
+	 {0, 1, 0, 0, 0, 0},		/* PA27 FCC1_RXSOC */
+	 {0, 1, 0, 1, 0, 0},		/* PA26 FCC1_RXCLAV SLAVE */
+	 {0, 1, 0, 1, 0, 1},		/* PA25 FCC1_TXD0 */
+	 {0, 1, 0, 1, 0, 1},		/* PA24 FCC1_TXD1 */
+	 {0, 1, 0, 1, 0, 1},		/* PA23 FCC1_TXD2 */
+	 {0, 1, 0, 1, 0, 1},		/* PA22 FCC1_TXD3 */
+	 {0, 1, 0, 1, 0, 1},		/* PA21 FCC1_TXD4 */
+	 {0, 1, 0, 1, 0, 1},		/* PA20 FCC1_TXD5 */
+	 {0, 1, 0, 1, 0, 1},		/* PA19 FCC1_TXD6 */
+	 {0, 1, 0, 1, 0, 1},		/* PA18 FCC1_TXD7 */
+	 {0, 1, 0, 0, 0, 0},		/* PA17 FCC1_RXD7 */
+	 {0, 1, 0, 0, 0, 0},		/* PA16 FCC1_RXD6 */
+	 {0, 1, 0, 0, 0, 0},		/* PA15 FCC1_RXD5 */
+	 {0, 1, 0, 0, 0, 0},		/* PA14 FCC1_RXD4 */
+	 {0, 1, 0, 0, 0, 0},		/* PA13 FCC1_RXD3 */
+	 {0, 1, 0, 0, 0, 0},		/* PA12 FCC1_RXD2 */
+	 {0, 1, 0, 0, 0, 0},		/* PA11 FCC1_RXD1 */
+	 {0, 1, 0, 0, 0, 0},		/* PA10 FCC1_RXD0 */
+	 {0, 1, 1, 1, 0, 1},		/* PA9  TDMA1_L1TXD */
+	 {0, 1, 1, 0, 0, 0},		/* PA8  TDMA1_L1RXD */
+	 {0, 0, 0, 0, 0, 0},		/* PA7  CONFIG0 */
+	 {0, 1, 1, 0, 0, 1},		/* PA6  TDMA1_L1RSYNC */
+	 {0, 0, 0, 1, 0, 0},		/* PA5  FCC2:RxAddr[2] */
+	 {0, 0, 0, 1, 0, 0},		/* PA4  FCC2:RxAddr[1] */
+	 {0, 0, 0, 1, 0, 0},		/* PA3  FCC2:RxAddr[0] */
+	 {0, 0, 0, 1, 0, 0},		/* PA2  FCC2:TxAddr[0] */
+	 {0, 0, 0, 1, 0, 0},		/* PA1  FCC2:TxAddr[1] */
+	 {0, 0, 0, 1, 0, 0}			/* PA0  FCC2:TxAddr[2] */
+	 },
+	/* Port B configuration */
+	{							/* conf ppar psor pdir podr pdat */
+	 {0, 0, 0, 1, 0, 0},		/* PB31 FCC2_RXSOC */
+	 {0, 0, 0, 1, 0, 0},		/* PB30 FCC2_TXSOC */
+	 {0, 0, 0, 1, 0, 0},		/* PB29 FCC2_RXCLAV */
+	 {0, 0, 0, 0, 0, 0},		/* PB28 CONFIG2 */
+	 {0, 1, 1, 0, 0, 1},		/* PB27 FCC2_TXD0 */
+	 {0, 1, 1, 0, 0, 0},		/* PB26 FCC2_TXD1 */
+	 {0, 0, 0, 1, 0, 0},		/* PB25 FCC2_TXD4 */
+	 {0, 1, 1, 0, 0, 1},		/* PB24 FCC2_TXD5 */
+	 {0, 0, 0, 1, 0, 0},		/* PB23 FCC2_TXD6 */
+	 {0, 1, 0, 1, 0, 1},		/* PB22 FCC2_TXD7 */
+	 {0, 1, 0, 0, 0, 0},		/* PB21 FCC2_RXD7 */
+	 {0, 1, 0, 0, 0, 0},		/* PB20 FCC2_RXD6 */
+	 {0, 1, 0, 0, 0, 0},		/* PB19 FCC2_RXD5 */
+	 {0, 0, 0, 1, 0, 0},		/* PB18 FCC2_RXD4 */
+	 {1, 1, 0, 0, 0, 0},		/* PB17 FCC3_RX_DV */
+	 {1, 1, 0, 0, 0, 0},		/* PB16 FCC3_RX_ER */
+	 {1, 1, 0, 1, 0, 0},		/* PB15 FCC3_TX_ER */
+	 {1, 1, 0, 1, 0, 0},		/* PB14 FCC3_TX_EN */
+	 {1, 1, 0, 0, 0, 0},		/* PB13 FCC3_COL */
+	 {1, 1, 0, 0, 0, 0},		/* PB12 FCC3_CRS */
+	 {1, 1, 0, 0, 0, 0},		/* PB11 FCC3_RXD3 */
+	 {1, 1, 0, 0, 0, 0},		/* PB10 FCC3_RXD2 */
+	 {1, 1, 0, 0, 0, 0},		/* PB9  FCC3_RXD1 */
+	 {1, 1, 0, 0, 0, 0},		/* PB8  FCC3_RXD0 */
+	 {1, 1, 0, 1, 0, 1},		/* PB7  FCC3_TXD0 */
+	 {1, 1, 0, 1, 0, 1},		/* PB6  FCC3_TXD1 */
+	 {1, 1, 0, 1, 0, 1},		/* PB5  FCC3_TXD2 */
+	 {1, 1, 0, 1, 0, 1},		/* PB4  FCC3_TXD3 */
+	 {0, 0, 0, 0, 0, 0},		/* PB3  */
+	 {0, 0, 0, 0, 0, 0},		/* PB2  */
+	 {0, 0, 0, 0, 0, 0},		/* PB1  */
+	 {0, 0, 0, 0, 0, 0},		/* PB0  */
+	 },
+	/* Port C configuration */
+	{							/* conf ppar psor pdir podr pdat */
+	 {0, 1, 0, 0, 0, 1},		/* PC31 CLK1 */
+	 {0, 0, 0, 1, 0, 0},		/* PC30 U1MASTER_N */
+	 {0, 1, 0, 0, 0, 1},		/* PC29 CLK3 */
+	 {0, 0, 0, 1, 0, 1},		/* PC28 -MT90220_RST */
+	 {0, 1, 0, 0, 0, 1},		/* PC27 CLK5 */
+	 {0, 0, 0, 1, 0, 1},		/* PC26 -QUADFALC_RST */
+	 {0, 1, 1, 1, 0, 1},		/* PC25 BRG4 */
+	 {1, 0, 0, 1, 0, 0},		/* PC24 MDIO */
+	 {1, 0, 0, 1, 0, 0},		/* PC23 MDC */
+	 {0, 1, 0, 0, 0, 1},		/* PC22 CLK10 */
+	 {0, 0, 0, 1, 0, 0},		/* PC21  */
+	 {0, 1, 0, 0, 0, 1},		/* PC20 CLK12 */
+	 {0, 1, 0, 0, 0, 1},		/* PC19 CLK13 */
+	 {1, 1, 0, 0, 0, 1},		/* PC18 CLK14 */
+	 {0, 1, 0, 0, 0, 0},		/* PC17 CLK15 */
+	 {1, 1, 0, 0, 0, 1},		/* PC16 CLK16 */
+	 {0, 1, 1, 0, 0, 0},		/* PC15 FCC1_TXADDR0 SLAVE */
+	 {0, 1, 1, 0, 0, 0},		/* PC14 FCC1_RXADDR0 SLAVE */
+	 {0, 1, 1, 0, 0, 0},		/* PC13 FCC1_TXADDR1 SLAVE */
+	 {0, 1, 1, 0, 0, 0},		/* PC12 FCC1_RXADDR1 SLAVE */
+	 {0, 0, 0, 1, 0, 0},		/* PC11 FCC2_RXD2 */
+	 {0, 0, 0, 1, 0, 0},		/* PC10 FCC2_RXD3 */
+	 {0, 0, 0, 1, 0, 1},		/* PC9  LTMODE */
+	 {0, 0, 0, 1, 0, 1},		/* PC8  SELSYNC */
+	 {0, 1, 1, 0, 0, 0},		/* PC7  FCC1_TXADDR2 SLAVE  */
+	 {0, 1, 1, 0, 0, 0},		/* PC6  FCC1_RXADDR2 SLAVE */
+	 {0, 0, 0, 1, 0, 0},		/* PC5  FCC2_TXCLAV MASTER */
+	 {0, 0, 0, 1, 0, 0},		/* PC4  FCC2_RXENB MASTER */
+	 {0, 0, 0, 1, 0, 0},		/* PC3  FCC2_TXD2 */
+	 {0, 0, 0, 1, 0, 0},		/* PC2  FCC2_TXD3 */
+	 {0, 0, 0, 0, 0, 1},		/* PC1  PTMC -PTEENB */
+	 {0, 0, 0, 1, 0, 1},		/* PC0  COMCLK_N */
+	 },
+	/* Port D configuration */
+	{							/* conf ppar psor pdir podr pdat */
+	 {0, 0, 0, 1, 0, 1},		/* PD31 -CAM_RST */
+	 {0, 0, 0, 1, 0, 0},		/* PD30 FCC2_TXENB */
+	 {0, 1, 1, 0, 0, 0},		/* PD29 FCC1_RXADDR3 SLAVE */
+	 {0, 1, 1, 0, 0, 1},		/* PD28 TDMC1_L1TXD */
+	 {0, 1, 1, 0, 0, 0},		/* PD27 TDMC1_L1RXD */
+	 {0, 1, 1, 0, 0, 1},		/* PD26 TDMC1_L1RSYNC */
+	 {0, 0, 0, 1, 0, 1},		/* PD25 LED0 -OFF */
+	 {0, 0, 0, 1, 0, 1},		/* PD24 LED5 -OFF */
+	 {1, 0, 0, 1, 0, 1},		/* PD23 -LXT971_RST */
+	 {0, 1, 1, 0, 0, 1},		/* PD22 TDMA2_L1TXD */
+	 {0, 1, 1, 0, 0, 0},		/* PD21 TDMA2_L1RXD */
+	 {0, 1, 1, 0, 0, 1},		/* PD20 TDMA2_L1RSYNC */
+	 {0, 0, 0, 1, 0, 0},		/* PD19 FCC2_TXADDR3 */
+	 {0, 0, 0, 1, 0, 0},		/* PD18 FCC2_RXADDR3 */
+	 {0, 1, 0, 1, 0, 0},		/* PD17 BRG2 */
+	 {0, 0, 0, 1, 0, 0},		/* PD16  */
+	 {0, 0, 0, 1, 0, 0},		/* PD15 PT2TO1 */
+	 {0, 0, 0, 1, 0, 1},		/* PD14 PT4TO3 */
+	 {0, 0, 0, 1, 0, 1},		/* PD13 -SWMODE */
+	 {0, 0, 0, 1, 0, 1},		/* PD12 -PTMODE */
+	 {0, 0, 0, 1, 0, 0},		/* PD11 FCC2_RXD0 */
+	 {0, 0, 0, 1, 0, 0},		/* PD10 FCC2_RXD1 */
+	 {1, 1, 0, 1, 0, 1},		/* PD9  SMC1_SMTXD */
+	 {1, 1, 0, 0, 0, 1},		/* PD8  SMC1_SMRXD */
+	 {0, 1, 1, 0, 0, 0},		/* PD7  FCC1_TXADDR3 SLAVE */
+	 {0, 0, 0, 1, 0, 0},		/* PD6  IMAMODE */
+	 {0, 0, 0, 0, 0, 0},		/* PD5  CONFIG2 */
+	 {0, 1, 0, 1, 0, 0},		/* PD4  BRG8 */
+	 {0, 0, 0, 0, 0, 0},		/* PD3  */
+	 {0, 0, 0, 0, 0, 0},		/* PD2  */
+	 {0, 0, 0, 0, 0, 0},		/* PD1  */
+	 {0, 0, 0, 0, 0, 0},		/* PD0  */
+	 }
+};
+
+long int initdram (int board_type)
+{
+	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile memctl8260_t *memctl = &immap->im_memctl;
+	volatile uchar *base;
+	volatile ulong *addr, cnt, val;
+	ulong save[32];				/* to make test non-destructive */
+	int i, maxsize;
+
+	memctl->memc_psrt = CFG_PSRT;
+	memctl->memc_mptpr = CFG_MPTPR;
+
+#ifndef CFG_RAMBOOT
+	immap->im_siu_conf.sc_ppc_acr = 0x00000026;
+	immap->im_siu_conf.sc_ppc_alrh = 0x01276345;
+	immap->im_siu_conf.sc_ppc_alrl = 0x89ABCDEF;
+	immap->im_siu_conf.sc_lcl_acr = 0x00000000;
+	immap->im_siu_conf.sc_lcl_alrh = 0x01234567;
+	immap->im_siu_conf.sc_lcl_alrl = 0x89ABCDEF;
+	immap->im_siu_conf.sc_tescr1 = 0x00004000;
+	immap->im_siu_conf.sc_ltescr1 = 0x00004000;
+
+	/* Init Main SDRAM */
+#define OP_VALUE   0x404A241A
+#define OP_VALUE_M (OP_VALUE & 0x87FFFFFF);
+	base = (uchar *) CFG_SDRAM_BASE;
+	memctl->memc_psdmr = 0x28000000 | OP_VALUE_M;
+	*base = 0xFF;
+	memctl->memc_psdmr = 0x08000000 | OP_VALUE_M;
+	for (i = 0; i < 8; i++)
+		*base = 0xFF;
+	memctl->memc_psdmr = 0x18000000 | OP_VALUE_M;
+	*(base + 0x110) = 0xFF;
+	memctl->memc_psdmr = OP_VALUE;
+	memctl->memc_lsdmr = 0x4086A522;
+	*base = 0xFF;
+
+	/* We must be able to test a location outsize the maximum legal size
+	 * to find out THAT we are outside; but this address still has to be
+	 * mapped by the controller. That means, that the initial mapping has
+	 * to be (at least) twice as large as the maximum expected size.
+	 */
+	maxsize = (1 + (~memctl->memc_or1 | 0x7fff)) / 2;
+
+	/*
+	 * Check memory range for valid RAM. A simple memory test determines
+	 * the actually available RAM size between addresses `base' and
+	 * `base + maxsize'. Some (not all) hardware errors are detected:
+	 * - short between address lines
+	 * - short between data lines
+	 */
+	i = 0;
+	for (cnt = maxsize / sizeof (long); cnt > 0; cnt >>= 1) {
+		addr = (volatile ulong *) base + cnt;	/* pointer arith! */
+		save[i++] = *addr;
+		*addr = ~cnt;
+	}
+
+	addr = (volatile ulong *) base;
+	save[i] = *addr;
+	*addr = 0;
+
+	if ((val = *addr) != 0) {
+		*addr = save[i];
+		return (0);
+	}
+
+	for (cnt = 1; cnt <= maxsize / sizeof (long); cnt <<= 1) {
+		addr = (volatile ulong *) base + cnt;	/* pointer arith! */
+		val = *addr;
+		*addr = save[--i];
+		if (val != ~cnt) {
+			/* Write the actual size to ORx
+			 */
+			memctl->memc_or1 |= ~(cnt * sizeof (long) - 1);
+			maxsize = cnt * sizeof (long) / 2;
+			break;
+		}
+	}
+
+	maxsize *= 2;
+	if (maxsize != hwc_main_sdram_size ())
+		printf ("Oops: memory test has not found all memory!\n");
+#endif
+
+	icache_enable ();
+	/* return total ram size of SDRAM */
+	return (maxsize);
+}
+
+int checkboard (void)
+{
+	char string[32];
+
+	hwc_manufact_date (string);
+
+	printf ("Board: Interphase 4539 (#%d %s)\n",
+		hwc_serial_number (),
+		string);
+
+#ifdef DEBUG
+	printf ("Manufacturing date: %s\n", string);
+	printf ("Serial number     : %d\n", hwc_serial_number ());
+	printf ("FLASH size        : %d MB\n", hwc_flash_size () >> 20);
+	printf ("Main SDRAM size   : %d MB\n", hwc_main_sdram_size () >> 20);
+	printf ("Local SDRAM size  : %d MB\n", hwc_local_sdram_size () >> 20);
+	hwc_mac_address (string);
+	printf ("MAC address       : %s\n", string);
+#endif
+
+	return 0;
+}
+
+int misc_init_r (void)
+{
+	char *s, str[32];
+	int num;
+
+	if ((s = getenv ("serial#")) == NULL &&
+		(num = hwc_serial_number ()) != -1) {
+		sprintf (str, "%06d", num);
+		setenv ("serial#", str);
+	}
+	if ((s = getenv ("ethaddr")) == NULL && hwc_mac_address (str) == 0) {
+		setenv ("ethaddr", str);
+	}
+	return (0);
+}
+
+/***************************************************************
+ * We take some basic Hardware Configuration Parameter from the
+ * Serial EEPROM conected to the PSpan bridge. We keep it as
+ * simple as possible.
+ */
+int hwc_flash_size (void)
+{
+	uchar byte;
+
+	if (!seeprom_read (0x40, &byte, sizeof (byte))) {
+		switch ((byte >> 2) & 0x3) {
+		case 0x1:
+			return 0x0400000;
+			break;
+		case 0x2:
+			return 0x0800000;
+			break;
+		case 0x3:
+			return 0x1000000;
+		default:
+			return 0x0100000;
+		}
+	}
+	return -1;
+}
+int hwc_local_sdram_size (void)
+{
+	uchar byte;
+
+	if (!seeprom_read (0x40, &byte, sizeof (byte))) {
+		switch ((byte & 0x03)) {
+		case 0x1:
+			return 0x0800000;
+		case 0x2:
+			return 0x1000000;
+		default:
+			return 0;			/* not present */
+		}
+	}
+	return -1;
+}
+int hwc_main_sdram_size (void)
+{
+	uchar byte;
+
+	if (!seeprom_read (0x41, &byte, sizeof (byte))) {
+		return 0x1000000 << ((byte >> 5) & 0x7);
+	}
+	return -1;
+}
+int hwc_serial_number (void)
+{
+	int sn = -1;
+
+	if (!seeprom_read (0xa0, (char *) &sn, sizeof (sn))) {
+		sn = cpu_to_le32 (sn);
+	}
+	return sn;
+}
+int hwc_mac_address (char *str)
+{
+	char mac[6];
+
+	if (!seeprom_read (0xb0, mac, sizeof (mac))) {
+		sprintf (str, "%02x:%02x:%02x:%02x:%02x:%02x\n",
+				 mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
+	} else {
+		strcpy (str, "ERROR");
+		return -1;
+	}
+	return 0;
+}
+int hwc_manufact_date (char *str)
+{
+	uchar byte;
+	int value;
+
+	if (seeprom_read (0x92, &byte, sizeof (byte)))
+		goto out;
+	value = byte;
+	if (seeprom_read (0x93, &byte, sizeof (byte)))
+		goto out;
+	value += byte << 8;
+	sprintf (str, "%02d/%02d/%04d",
+			 value & 0x1F, (value >> 5) & 0xF,
+			 1980 + ((value >> 9) & 0x1FF));
+	return 0;
+
+  out:
+	strcpy (str, "ERROR");
+	return -1;
+}
+
+#define PSPAN_ADDR      0xF0020000
+#define EEPROM_REG      0x408
+#define EEPROM_READ_CMD 0xA000
+#define PSPAN_WRITE(a,v) \
+    *((volatile unsigned long *)(PSPAN_ADDR+(a))) = v; eieio()
+#define PSPAN_READ(a) \
+    *((volatile unsigned long *)(PSPAN_ADDR+(a)))
+
+int seeprom_read (int addr, uchar * data, int size)
+{
+	ulong val, cmd;
+	int i;
+
+	for (i = 0; i < size; i++) {
+
+		cmd = EEPROM_READ_CMD;
+		cmd |= ((addr + i) << 24) & 0xff000000;
+
+		/* Wait for ACT to authorize write */
+		while ((val = PSPAN_READ (EEPROM_REG)) & 0x80)
+			eieio ();
+
+		/* Write command */
+		PSPAN_WRITE (EEPROM_REG, cmd);
+
+		/* Wait for data to be valid */
+		while ((val = PSPAN_READ (EEPROM_REG)) & 0x80)
+			eieio ();
+		/* Do it twice, first read might be erratic */
+		while ((val = PSPAN_READ (EEPROM_REG)) & 0x80)
+			eieio ();
+
+		/* Read error */
+		if (val & 0x00000040) {
+			return -1;
+		} else {
+			data[i] = (val >> 16) & 0xff;
+		}
+	}
+	return 0;
+}
diff --git a/board/ivm/ivm.c b/board/ivm/ivm.c
new file mode 100644
index 0000000..117dbe6
--- /dev/null
+++ b/board/ivm/ivm.c
@@ -0,0 +1,382 @@
+/*
+ * (C) Copyright 2000, 2001
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ * Ulrich Lutz, Speech Design GmbH, ulutz@datalab.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc8xx.h>
+#include <commproc.h>
+
+#ifdef CONFIG_STATUS_LED
+# include <status_led.h>
+#endif
+
+/* ------------------------------------------------------------------------- */
+
+static long int dram_size (long int, long int *, long int);
+
+/* ------------------------------------------------------------------------- */
+
+#define	_NOT_USED_	0xFFFFFFFF
+
+/*
+ * 50 MHz SHARC access using UPM A
+ */
+const uint sharc_table[] =
+{
+	/*
+	 * Single Read. (Offset 0 in UPM RAM)
+	 */
+	0x0FF3FC04, 0x0FF3EC00, 0x7FFFEC04, 0xFFFFEC04,
+	0xFFFFEC05, /* last */
+	            _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	/*
+	 * Burst Read. (Offset 8 in UPM RAM)
+	 */
+	/* last */
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	/*
+	 * Single Write. (Offset 18 in UPM RAM)
+	 */
+	0x0FAFFC04, 0x0FAFEC00, 0x7FFFEC04, 0xFFFFEC04,
+	0xFFFFEC05, /* last */
+	            _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	/*
+	 * Burst Write. (Offset 20 in UPM RAM)
+	 */
+	/* last */
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	/*
+	 * Refresh  (Offset 30 in UPM RAM)
+	 */
+	/* last */
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	/*
+	 * Exception. (Offset 3c in UPM RAM)
+	 */
+	0x7FFFFC07, /* last */
+		    _NOT_USED_, _NOT_USED_, _NOT_USED_,
+};
+
+
+/*
+ * 50 MHz SDRAM access using UPM B
+ */
+const uint sdram_table[] =
+{
+	/*
+	 * Single Read. (Offset 0 in UPM RAM)
+	 */
+	0x0E26FC04, 0x11ADFC04, 0xEFBBBC00, 0x1FF77C45,	/* last */
+	_NOT_USED_,
+	/*
+	 * SDRAM Initialization (offset 5 in UPM RAM)
+	 *
+         * This is no UPM entry point. The following definition uses
+         * the remaining space to establish an initialization
+         * sequence, which is executed by a RUN command.
+	 *
+	 */
+		    0x1FF77C35, 0xEFEABC34, 0x1FB57C35, /* last */
+	/*
+	 * Burst Read. (Offset 8 in UPM RAM)
+	 */
+	0x0E26FC04, 0x10ADFC04, 0xF0AFFC00, 0xF0AFFC00,
+	0xF1AFFC00, 0xEFBBBC00, 0x1FF77C45, /* last */
+					    _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	/*
+	 * Single Write. (Offset 18 in UPM RAM)
+	 */
+	0x1F27FC04, 0xEEAEBC04, 0x01B93C00, 0x1FF77C45, /* last */
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	/*
+	 * Burst Write. (Offset 20 in UPM RAM)
+	 */
+	0x0E26BC00, 0x10AD7C00, 0xF0AFFC00, 0xF0AFFC00,
+	0xE1BBBC04, 0x1FF77C45, /* last */
+				_NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	/*
+	 * Refresh  (Offset 30 in UPM RAM)
+	 */
+	0x1FF5FC84, 0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC84,
+	0xFFFFFC05, /* last */
+		    _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	/*
+	 * Exception. (Offset 3c in UPM RAM)
+	 */
+	0x7FFFFC07, /* last */
+		    _NOT_USED_, _NOT_USED_, _NOT_USED_,
+};
+
+/* ------------------------------------------------------------------------- */
+
+
+/*
+ * Check Board Identity:
+ *
+ */
+
+int checkboard (void)
+{
+#ifdef CONFIG_IVMS8
+	puts ("Board: IVMS8\n");
+#endif
+#ifdef CONFIG_IVML24
+	puts ("Board: IVM-L8/24\n");
+#endif
+	return (0);
+}
+
+/* ------------------------------------------------------------------------- */
+
+long int
+initdram (int board_type)
+{
+    volatile immap_t     *immr  = (immap_t *)CFG_IMMR;
+    volatile memctl8xx_t *memctl = &immr->im_memctl;
+    long int size_b0;
+
+    /* enable SDRAM clock ("switch on" SDRAM) */
+    immr->im_cpm.cp_pbpar &= ~(CFG_PB_SDRAM_CLKE);	/* GPIO */
+    immr->im_cpm.cp_pbodr &= ~(CFG_PB_SDRAM_CLKE);	/* active output */
+    immr->im_cpm.cp_pbdir |=   CFG_PB_SDRAM_CLKE ;	/* output */
+    immr->im_cpm.cp_pbdat |=   CFG_PB_SDRAM_CLKE ;	/* assert SDRAM CLKE */
+    udelay(1);
+
+    /*
+     * Map controller bank 1 for ELIC SACCO
+     */
+    memctl->memc_or1 = CFG_OR1;
+    memctl->memc_br1 = CFG_BR1;
+
+    /*
+     * Map controller bank 2 for ELIC EPIC
+     */
+    memctl->memc_or2 = CFG_OR2;
+    memctl->memc_br2 = CFG_BR2;
+
+    /*
+     * Configure UPMA for SHARC
+     */
+    upmconfig(UPMA, (uint *)sharc_table, sizeof(sharc_table)/sizeof(uint));
+
+#if defined(CONFIG_IVML24)
+    /*
+     * Map controller bank 4 for HDLC Address space
+     */
+    memctl->memc_or4 = CFG_OR4;
+    memctl->memc_br4 = CFG_BR4;
+#endif
+
+    /*
+     * Map controller bank 5 for SHARC
+     */
+    memctl->memc_or5 = CFG_OR5;
+    memctl->memc_br5 = CFG_BR5;
+
+    memctl->memc_mamr = 0x00001000;
+
+    /*
+     * Configure UPMB for SDRAM
+     */
+    upmconfig(UPMB, (uint *)sdram_table, sizeof(sdram_table)/sizeof(uint));
+
+    memctl->memc_mptpr = CFG_MPTPR_1BK_8K;
+
+    memctl->memc_mar = 0x00000088;
+
+    /*
+     * Map controller bank 3 to the SDRAM bank at preliminary address.
+     */
+    memctl->memc_or3 = CFG_OR3_PRELIM;
+    memctl->memc_br3 = CFG_BR3_PRELIM;
+
+    memctl->memc_mbmr = CFG_MBMR_8COL;	/* refresh not enabled yet */
+
+    udelay(200);
+    memctl->memc_mcr = 0x80806105;	/* precharge */
+    udelay(1);
+    memctl->memc_mcr = 0x80806106;	/* load mode register */
+    udelay(1);
+    memctl->memc_mcr = 0x80806130;	/* autorefresh */
+    udelay(1);
+    memctl->memc_mcr = 0x80806130;	/* autorefresh */
+    udelay(1);
+    memctl->memc_mcr = 0x80806130;	/* autorefresh */
+    udelay(1);
+    memctl->memc_mcr = 0x80806130;	/* autorefresh */
+    udelay(1);
+    memctl->memc_mcr = 0x80806130;	/* autorefresh */
+    udelay(1);
+    memctl->memc_mcr = 0x80806130;	/* autorefresh */
+    udelay(1);
+    memctl->memc_mcr = 0x80806130;	/* autorefresh */
+    udelay(1);
+    memctl->memc_mcr = 0x80806130;	/* autorefresh */
+
+    memctl->memc_mbmr |= MAMR_PTBE;	/* refresh enabled */
+
+    /*
+     * Check Bank 0 Memory Size for re-configuration
+     */
+    size_b0 = dram_size (CFG_MBMR_8COL, (ulong *)SDRAM_BASE3_PRELIM, SDRAM_MAX_SIZE);
+
+    memctl->memc_mbmr = CFG_MBMR_8COL | MAMR_PTBE;
+
+    return (size_b0);
+}
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * Check memory range for valid RAM. A simple memory test determines
+ * the actually available RAM size between addresses `base' and
+ * `base + maxsize'. Some (not all) hardware errors are detected:
+ * - short between address lines
+ * - short between data lines
+ */
+
+static long int dram_size (long int mamr_value, long int *base, long int maxsize)
+{
+    volatile immap_t     *immr  = (immap_t *)CFG_IMMR;
+    volatile memctl8xx_t *memctl = &immr->im_memctl;
+    volatile long int	 *addr;
+    ulong		  cnt, val;
+    ulong		  save[32];	/* to make test non-destructive */
+    unsigned char	  i = 0;
+
+    memctl->memc_mbmr = mamr_value;
+
+    for (cnt = maxsize/sizeof(long); cnt > 0; cnt >>= 1) {
+	addr = base + cnt;	/* pointer arith! */
+
+	save[i++] = *addr;
+	*addr = ~cnt;
+    }
+
+    /* write 0 to base address */
+    addr = base;
+    save[i] = *addr;
+    *addr = 0;
+
+    /* check at base address */
+    if ((val = *addr) != 0) {
+	*addr = save[i];
+	return (0);
+    }
+
+    for (cnt = 1; cnt <= maxsize/sizeof(long); cnt <<= 1) {
+	addr = base + cnt;	/* pointer arith! */
+
+	val = *addr;
+	*addr = save[--i];
+
+	if (val != (~cnt)) {
+	    return (cnt * sizeof(long));
+	}
+    }
+    return (maxsize);
+}
+
+/* ------------------------------------------------------------------------- */
+
+void	reset_phy(void)
+{
+	immap_t *immr = (immap_t *)CFG_IMMR;
+
+	/* De-assert Ethernet Powerdown */
+	immr->im_cpm.cp_pbpar &= ~(CFG_PB_ETH_POWERDOWN); /* GPIO */
+	immr->im_cpm.cp_pbodr &= ~(CFG_PB_ETH_POWERDOWN); /* active output */
+	immr->im_cpm.cp_pbdir |=   CFG_PB_ETH_POWERDOWN ; /* output */
+	immr->im_cpm.cp_pbdat &= ~(CFG_PB_ETH_POWERDOWN); /* Enable PHY power */
+	udelay(1000);
+
+	/*
+         * RESET is implemented by a positive pulse of at least 1 us
+         * at the reset pin.
+	 *
+	 * Configure RESET pins for NS DP83843 PHY, and RESET chip.
+	 *
+	 * Note: The RESET pin is high active, but there is an
+	 *	 inverter on the SPD823TS board...
+	 */
+	immr->im_ioport.iop_pcpar &= ~(CFG_PC_ETH_RESET);
+	immr->im_ioport.iop_pcdir |=   CFG_PC_ETH_RESET;
+	/* assert RESET signal of PHY */
+	immr->im_ioport.iop_pcdat &= ~(CFG_PC_ETH_RESET);
+	udelay (10);
+	/* de-assert RESET signal of PHY */
+	immr->im_ioport.iop_pcdat |=   CFG_PC_ETH_RESET;
+	udelay (10);
+}
+
+/* ------------------------------------------------------------------------- */
+
+void show_boot_progress (int status)
+{
+#if defined(CONFIG_STATUS_LED)
+# if defined(STATUS_LED_YELLOW)
+	status_led_set (STATUS_LED_YELLOW,
+			(status < 0) ? STATUS_LED_ON : STATUS_LED_OFF);
+# endif /* STATUS_LED_YELLOW */
+# if defined(STATUS_LED_BOOT)
+	if (status == 6)
+	  status_led_set(STATUS_LED_BOOT, STATUS_LED_OFF);
+# endif /* STATUS_LED_BOOT */
+#endif /* CONFIG_STATUS_LED */
+}
+
+/* ------------------------------------------------------------------------- */
+
+void ide_set_reset(int on)
+{
+	volatile immap_t *immr = (immap_t *)CFG_IMMR;
+
+	/*
+	 * Configure PC for IDE Reset Pin
+	 */
+	if (on) {		/* assert RESET */
+		immr->im_ioport.iop_pcdat &= ~(CFG_PC_IDE_RESET);
+	} else {		/* release RESET */
+		immr->im_ioport.iop_pcdat |=   CFG_PC_IDE_RESET;
+	}
+
+	/* program port pin as GPIO output */
+	immr->im_ioport.iop_pcpar &= ~(CFG_PC_IDE_RESET);
+	immr->im_ioport.iop_pcso  &= ~(CFG_PC_IDE_RESET);
+	immr->im_ioport.iop_pcdir |=   CFG_PC_IDE_RESET;
+}
+
+/* ------------------------------------------------------------------------- */
diff --git a/board/lantec/lantec.c b/board/lantec/lantec.c
new file mode 100644
index 0000000..812f65a
--- /dev/null
+++ b/board/lantec/lantec.c
@@ -0,0 +1,236 @@
+/*
+ * (C) Copyright 2000, 2001
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ * (C) Copyright 2001
+ * Torsten Stevens, FHG IMS, stevens@ims.fhg.de
+ * Bruno Achauer, Exet AG, bruno@exet-ag.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Derived from ../tqm8xx/tqm8xx.c
+ */
+
+#include <common.h>
+#include <mpc8xx.h>
+
+/* ------------------------------------------------------------------------- */
+
+static long int dram_size (long int, long int *, long int);
+
+/* ------------------------------------------------------------------------- */
+
+#define	_NOT_USED_	0xFFFFFFFF
+
+const uint sdram_table[] =
+{
+	/*
+	 * Single Read. (Offset 0 in UPMA RAM)
+	 */
+	0x1f07fc04, 0xeeaefc04, 0x11adfc04, 0xefbbbc00,
+	0x1ff77c47, /* last */
+	/*
+	 * SDRAM Initialization (offset 5 in UPMA RAM)
+	 *
+	 * This is no UPM entry point. The following definition uses
+	 * the remaining space to establish an initialization
+	 * sequence, which is executed by a RUN command.
+	 *
+	 */
+	0x1ff77c35, 0xefeabc34, 0x1fb57c35, /* last */
+	/*
+	 * Burst Read. (Offset 8 in UPMA RAM)
+	 */
+	0x1f07fc04, 0xeeaefc04, 0x10adfc04, 0xf0affc00,
+	0xf0affc00, 0xf1affc00,	0xefbbbc00, 0x1ff77c47, /* last */
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	/*
+	 * Single Write. (Offset 18 in UPMA RAM)
+	 */
+ 	0x1f27fc04, 0xeeaebc00, 0x01b93c04, 0x1ff77c47, /* last */
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	/*
+	 * Burst Write. (Offset 20 in UPMA RAM)
+	 */
+	0x1f07fc04, 0xeeaebc00, 0x10ad7c00, 0xf0affc00,
+	0xf0affc00, 0xe1bbbc04, 0x1ff77c47, /* last */
+					    _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	/*
+	 * Refresh  (Offset 30 in UPMA RAM)
+	 */
+	0x1ff5fc84, 0xfffffc04, 0xfffffc04, 0xfffffc04,
+	0xfffffc84, 0xfffffc07, 0xfffffc07, /* last */
+					    _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	/*
+	 * Exception. (Offset 3c in UPMA RAM)
+	 */
+	0x7ffffc07, /* last */
+		    _NOT_USED_, _NOT_USED_, _NOT_USED_,
+};
+
+/* ------------------------------------------------------------------------- */
+
+
+/*
+ * Check Board Identity:
+ *
+ * Test TQ ID string (TQM8xx...)
+ * If present, check for "L" type (no second DRAM bank),
+ * otherwise "L" type is assumed as default.
+ *
+ * Return 1 for "L" type, 0 else.
+ */
+
+int checkboard (void)
+{
+	printf("Board: Lantec special edition rev.%d\n", CONFIG_LANTEC);
+	return 0;
+}
+
+/* ------------------------------------------------------------------------- */
+
+long int initdram (int board_type)
+{
+	volatile immap_t     *immap  = (immap_t *)CFG_IMMR;
+	volatile memctl8xx_t *memctl = &immap->im_memctl;
+	long int size_b0;
+	int i;
+
+	/*
+	 * Configure UPMA for SDRAM
+	 */
+	upmconfig(UPMA, (uint *)sdram_table, sizeof(sdram_table)/sizeof(uint));
+
+	memctl->memc_mptpr = CFG_MPTPR_1BK_8K /* XXX CFG_MPTPR XXX */;
+
+	/* burst length=4, burst type=sequential, CAS latency=2 */
+	memctl->memc_mar = 0x00000088;
+
+	/*
+	* Map controller bank 3 to the SDRAM bank at preliminary address.
+	*/
+	memctl->memc_or3 = CFG_OR3_PRELIM;
+	memctl->memc_br3 = CFG_BR3_PRELIM;
+
+	/* initialize memory address register */
+	memctl->memc_mamr = CFG_MAMR_8COL;	/* refresh not enabled yet */
+
+	/* mode initialization (offset 5) */
+	udelay(200);	/* 0x80006105 */
+	memctl->memc_mcr = MCR_OP_RUN | MCR_MB_CS3 | MCR_MLCF(1) | MCR_MAD(0x05);
+
+	/* run 2 refresh sequence with 4-beat refresh burst (offset 0x30) */
+	udelay(1);		/* 0x80006130 */
+	memctl->memc_mcr = MCR_OP_RUN | MCR_MB_CS3 | MCR_MLCF(1) | MCR_MAD(0x30);
+	udelay(1);		/* 0x80006130 */
+	memctl->memc_mcr = MCR_OP_RUN | MCR_MB_CS3 | MCR_MLCF(1) | MCR_MAD(0x30);
+
+	udelay(1);		/* 0x80006106 */
+	memctl->memc_mcr = MCR_OP_RUN | MCR_MB_CS3 | MCR_MLCF(1) | MCR_MAD(0x06);
+
+	memctl->memc_mamr |= MAMR_PTBE;	/* refresh enabled */
+
+	udelay(200);
+
+	/* Need at least 10 DRAM accesses to stabilize */
+	for (i=0; i<10; ++i) {
+		volatile unsigned long *addr = \
+				(volatile unsigned long *)SDRAM_BASE3_PRELIM;
+		unsigned long val;
+
+		val = *(addr + i);
+		*(addr + i) = val;
+	}
+
+	/*
+	* Check Bank 0 Memory Size for re-configuration
+	*/
+	size_b0 = dram_size (CFG_MAMR_8COL,
+			     (ulong *)SDRAM_BASE3_PRELIM,
+			     SDRAM_MAX_SIZE);
+
+	memctl->memc_mamr = CFG_MAMR_8COL | MAMR_PTBE;
+
+	/*
+	 * Final mapping:
+	 */
+
+	memctl->memc_or3 = ((-size_b0) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM;
+	memctl->memc_br3 = (CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
+	udelay(1000);
+
+	return (size_b0);
+}
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * Check memory range for valid RAM. A simple memory test determines
+ * the actually available RAM size between addresses `base' and
+ * `base + maxsize'. Some (not all) hardware errors are detected:
+ * - short between address lines
+ * - short between data lines
+ */
+
+static long int dram_size (long int mamr_value, long int *base, long int maxsize)
+{
+    volatile immap_t     *immap  = (immap_t *)CFG_IMMR;
+    volatile memctl8xx_t *memctl = &immap->im_memctl;
+    volatile long int	 *addr;
+    ulong		  cnt, val;
+    ulong		  save[32];	/* to make test non-destructive */
+    unsigned char	  i = 0;
+
+    memctl->memc_mamr = mamr_value;
+
+    for (cnt = maxsize/sizeof(long); cnt > 0; cnt >>= 1) {
+	addr = base + cnt;	/* pointer arith! */
+
+	save[i++] = *addr;
+	*addr = ~cnt;
+    }
+
+    /* write 0 to base address */
+    addr = base;
+    save[i] = *addr;
+    *addr = 0;
+
+    /* check at base address */
+    if ((val = *addr) != 0) {
+	*addr = save[i];
+	return (0);
+    }
+
+    for (cnt = 1; cnt <= maxsize/sizeof(long); cnt <<= 1) {
+	addr = base + cnt;	/* pointer arith! */
+
+	val = *addr;
+	*addr = save[--i];
+
+	if (val != (~cnt)) {
+	    return (cnt * sizeof(long));
+	}
+    }
+    return (maxsize);
+}
diff --git a/board/mousse/mousse.c b/board/mousse/mousse.c
new file mode 100644
index 0000000..7208a17
--- /dev/null
+++ b/board/mousse/mousse.c
@@ -0,0 +1,86 @@
+/*
+ * MOUSSE Board Support
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2001
+ * James Dougherty, jfd@cs.stanford.edu
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc824x.h>
+#include <asm/processor.h>
+
+#include "mousse.h"
+#include "m48t59y.h"
+#include <pci.h>
+
+
+int checkboard (void)
+{
+	ulong busfreq = get_bus_freq (0);
+	char buf[32];
+
+	puts ("Board: MOUSSE MPC8240/KAHLUA - CHRP (MAP B)\n");
+	printf ("Built: %s at %s\n", __DATE__, __TIME__);
+	printf ("MPLD:  Revision %d\n", SYS_REVID_GET ());
+	printf ("Local Bus:  %s MHz\n", strmhz (buf, busfreq));
+
+	return 0;
+}
+
+int checkflash (void)
+{
+	printf ("checkflash\n");
+	flash_init ();
+	return 0;
+}
+
+long int initdram (int board_type)
+{
+	return CFG_RAM_SIZE;
+}
+
+
+void get_tod (void)
+{
+	int year, month, day, hour, minute, second;
+
+	m48_tod_get (&year, &month, &day, &hour, &minute, &second);
+
+	printf ("  Current date/time: %d/%d/%d %d:%d:%d \n",
+		month, day, year, hour, minute, second);
+
+}
+
+/*
+ * EPIC, PCI, and I/O devices.
+ * Initialize Mousse Platform, probe for PCI devices,
+ * Query configuration parameters if not set.
+ */
+int misc_init_f (void)
+{
+	m48_tod_init ();	/* Init SGS M48T59Y TOD/NVRAM */
+	printf ("RTC:   M48T589 TOD/NVRAM (%d) bytes\n", TOD_NVRAM_SIZE);
+	get_tod ();
+	return 0;
+}