Patch by Jon Loeliger, 17 June 2004:

Completion of the 8540ADS/8560ADS updates:
Fix some PCI and Rapid I/O memory maps,
Initialize both TSEC 1 and 2,
Initialize SDRAM
Update MAINTAINER for 85xx boards and README.mpc85xxads

20 files changed, 1260 insertions, 750 deletions

diff --git a/CHANGELOG b/CHANGELOG
index bd9be46..33fafcb 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,13 @@
 Changes since U-Boot 1.1.1:
 ======================================================================
 
+* Patch by Jon Loeliger, 17 June 2004:
+  Completion of the 8540ADS/8560ADS updates:
+  Fix some PCI and Rapid I/O memory maps,
+  Initialize both TSEC 1 and 2,
+  Initialize SDRAM
+  Update MAINTAINER for 85xx boards and README.mpc85xxads
+
 * Patch by Yuli Barcohen, 16 Jun 2004:
   Remove obsolete AdderII port which was superseded by unified
   AdderII/Adder87x port
diff --git a/MAINTAINERS b/MAINTAINERS
index e96697d..6ffdead 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -184,7 +184,7 @@ Eran Man <eran@nbase.co.il>
 Andrea "llandre" Marson <andrea.marson@dave-tech.it>
 
 	PPChameleonEVB	PPC405EP
- 
+
 Reinhard Meyer <r.meyer@emk-elektronik.de>
 
 	TOP860			MPC860T
@@ -270,7 +270,7 @@ John Zhan <zhanz@sinovee.com>
 
 	svm_sc8xx		MPC8xx
 
-Xianghua Xiao <x.xiao@motorola.com>
+Jon Loeliger <jdl@freescale.com>
 
 	MPC8540ADS		MPC8540
 	MPC8560ADS		MPC8560
@@ -376,7 +376,7 @@ Robert Schwebel <r.schwebel@pengutronix.de>
 Andrea Scian <andrea.scian@dave-tech.it>
 
 	B2				ARM7TDMI (S3C44B0X)
- 
+
 Alex Züpke <azu@sysgo.de>
 
 	lart			SA1100
diff --git a/Makefile b/Makefile
index 011c0d7..26dddb9 100644
--- a/Makefile
+++ b/Makefile
@@ -1001,13 +1001,13 @@ M5282EVB_config :		unconfig
 ## MPC85xx Systems
 #########################################################################
 
-MPC8540ADS_config:      unconfig
+MPC8540ADS_config:	unconfig
 	@./mkconfig $(@:_config=) ppc mpc85xx mpc8540ads
 
-MPC8560ADS_config:      unconfig
+MPC8560ADS_config:	unconfig
 	@./mkconfig $(@:_config=) ppc mpc85xx mpc8560ads
 
-stxgp3_config:      unconfig
+stxgp3_config:		unconfig
 	@./mkconfig $(@:_config=) ppc mpc85xx stxgp3
 
 #########################################################################
diff --git a/board/dave/PPChameleonEVB/PPChameleonEVB.c b/board/dave/PPChameleonEVB/PPChameleonEVB.c
index 2b12f97..ffa53f8 100644
--- a/board/dave/PPChameleonEVB/PPChameleonEVB.c
+++ b/board/dave/PPChameleonEVB/PPChameleonEVB.c
@@ -29,15 +29,11 @@
 #include <command.h>
 #include <malloc.h>
 
-
 /* ------------------------------------------------------------------------- */
 
-
-
 /* Prototypes */
 int gunzip(void *, int, unsigned char *, int *);
 
-
 int board_early_init_f (void)
 {
 	out32(GPIO0_OR, CFG_NAND0_CE);                 /* set initial outputs     */
@@ -71,11 +67,9 @@ int board_early_init_f (void)
 #else
 	mtebc (epcr, 0x28400000); /* ebc in high-z */
 #endif
-
 	return 0;
 }
 
-
 /* ------------------------------------------------------------------------- */
 
 int misc_init_f (void)
@@ -168,7 +162,6 @@ int misc_init_r (void)
 	udelay(1000); /* wait 1ms */
 	SET_FPGA(FPGA_PRG | FPGA_CLK | FPGA_DATA);
 	udelay(1000); /* wait 1ms */
-
 #endif
 
 #if 0
@@ -186,7 +179,6 @@ int misc_init_r (void)
 	return (0);
 }
 
-
 /*
  * Check Board Identity:
  */
diff --git a/board/mpc8540ads/init.S b/board/mpc8540ads/init.S
index 486fdc8..99c4d79 100644
--- a/board/mpc8540ads/init.S
+++ b/board/mpc8540ads/init.S
@@ -45,7 +45,8 @@
 tlb1_entry:
 	entry_start
 
-	.long 0x0a	/* the following data table uses a few of 16 TLB entries */
+	/* Number of entries in the following table */
+	.long 0x0c
 
 	.long TLB1_MAS0(1,1,0)
 	.long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_1M)
@@ -116,40 +117,57 @@ tlb1_entry:
 
 	.long TLB1_MAS0(1,8,0)
 	.long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_256M)
-	.long TLB1_MAS2(((CFG_PCI_MEM_BASE>>12) & 0xfffff),0,0,0,0,1,0,1,0)
-	.long TLB1_MAS3(((CFG_PCI_MEM_BASE>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1)
+	.long TLB1_MAS2(((CFG_PCI1_MEM_BASE>>12) & 0xfffff),0,0,0,0,1,0,1,0)
+	.long TLB1_MAS3(((CFG_PCI1_MEM_BASE>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1)
 
 	.long TLB1_MAS0(1,9,0)
 	.long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_16K)
 	.long TLB1_MAS2(((CFG_BCSR>>12) & 0xfffff),0,0,0,0,1,0,1,0)
 	.long TLB1_MAS3(((CFG_BCSR>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1)
 
-  #if (CFG_CCSRBAR_DEFAULT != CFG_CCSRBAR)
+	/*
+	 * RapidIO MMU for 512M
+	 * Two entries, 10 and 11
+	 */
+	.long TLB1_MAS0(1,10,0)
+	.long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_256M)
+	.long TLB1_MAS2(((CFG_RIO_MEM_BASE>>12) & 0xfffff),0,0,0,0,1,0,1,0)
+	.long TLB1_MAS3(((CFG_RIO_MEM_BASE>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1)
+
+	.long TLB1_MAS0(1,11,0)
+	.long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_256M)
+	.long TLB1_MAS2(((CFG_RIO_MEM_BASE+0x10000000>>12) & 0xfffff),0,0,0,0,1,0,1,0)
+	.long TLB1_MAS3(((CFG_RIO_MEM_BASE+0x10000000>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1)
+
+
+#if (CFG_CCSRBAR_DEFAULT != CFG_CCSRBAR)
 	.long TLB1_MAS0(1,15,0)
 	.long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_1M)
 	.long TLB1_MAS2(((CFG_CCSRBAR_DEFAULT>>12) & 0xfffff),0,0,0,0,1,0,1,0)
 	.long TLB1_MAS3(((CFG_CCSRBAR_DEFAULT>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1)
-  #else
+#else
 	.long TLB1_MAS0(1,15,0)
 	.long TLB1_MAS1(0,0,0,0,BOOKE_PAGESZ_1M)
 	.long TLB1_MAS2(0,0,0,0,0,0,0,0,0)
 	.long TLB1_MAS3(0,0,0,0,0,0,1,0,1,0,1)
-  #endif
+#endif
 	entry_end
 
 /*
  * LAW(Local Access Window) configuration:
  *
  * 0x0000_0000     0x7fff_ffff     DDR                     2G
- * 0x8000_0000     0x9fff_ffff     PCI MEM                 512M
+ * 0x8000_0000     0x9fff_ffff     PCI1 MEM                512M
+ * 0xc000_0000     0xdfff_ffff     RapidIO                 512M
  * 0xe000_0000     0xe000_ffff     CCSR                    1M
- * 0xe200_0000     0xe2ff_ffff     PCI IO                  16M
+ * 0xe200_0000     0xe2ff_ffff     PCI1 IO                 16M
  * 0xf000_0000     0xf7ff_ffff     SDRAM                   128M
  * 0xf800_0000     0xf80f_ffff     BCSR                    1M
  * 0xff00_0000     0xffff_ffff     FLASH (boot bank)       16M
  *
- * Note: CCSRBAR and L2-as-SRAM don't need a configured Local Access Window.
- * Note: If flash is 8M at default position(last 8M),no LAW needed.
+ * Notes:
+ *    CCSRBAR and L2-as-SRAM don't need a configured Local Access Window.
+ *    If flash is 8M at default position (last 8M), no LAW needed.
  */
 
 #if !defined(CONFIG_SPD_EEPROM)
@@ -160,7 +178,7 @@ tlb1_entry:
 #define LAWAR0  ((LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & LAWAR_SIZE_128M)) & ~LAWAR_EN)
 #endif
 
-#define LAWBAR1 ((CFG_PCI_MEM_BASE>>12) & 0xfffff)
+#define LAWBAR1 ((CFG_PCI1_MEM_BASE>>12) & 0xfffff)
 #define LAWAR1	(LAWAR_EN | LAWAR_TRGT_IF_PCIX | (LAWAR_SIZE & LAWAR_SIZE_512M))
 
 /*
@@ -174,14 +192,14 @@ tlb1_entry:
 #define LAWAR2 ((LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_128M)) & ~LAWAR_EN)
 #endif
 
-#define LAWBAR3 ((CFG_PCI_IO_BASE>>12) & 0xfffff)
+#define LAWBAR3 ((CFG_PCI1_IO_BASE>>12) & 0xfffff)
 #define LAWAR3	(LAWAR_EN | LAWAR_TRGT_IF_PCIX | (LAWAR_SIZE & LAWAR_SIZE_16M))
 
 /*
  * Rapid IO at 0xc000_0000 for 512 M
  */
-#define LAWBAR4 ((CFG_RAPID_IO_BASE>>12) & 0xfffff)
-#define LAWAR4	(LAWAR_EN | LAWAR_TRGT_IF_PCIX | (LAWAR_SIZE & LAWAR_SIZE_512M))
+#define LAWBAR4 ((CFG_RIO_MEM_BASE>>12) & 0xfffff)
+#define LAWAR4	(LAWAR_EN | LAWAR_TRGT_IF_RIO | (LAWAR_SIZE & LAWAR_SIZE_512M))
 
 
 	.section .bootpg, "ax"
diff --git a/board/mpc8540ads/mpc8540ads.c b/board/mpc8540ads/mpc8540ads.c
index 2694d62..a994d16 100644
--- a/board/mpc8540ads/mpc8540ads.c
+++ b/board/mpc8540ads/mpc8540ads.c
@@ -1,4 +1,5 @@
  /*
+ * Copyright 2004 Freescale Semiconductor.
  * (C) Copyright 2002,2003, Motorola Inc.
  * Xianghua Xiao, (X.Xiao@motorola.com)
  *
@@ -24,75 +25,69 @@
  */
 
 
-extern long int spd_sdram (void);
-
 #include <common.h>
 #include <asm/processor.h>
 #include <asm/immap_85xx.h>
 #include <spd.h>
 
-long int fixed_sdram (void);
-
 #if defined(CONFIG_DDR_ECC)
-void dma_init(void);
-uint dma_check(void);
-int dma_xfer(void *dest, uint count, void *src);
+extern void ddr_enable_ecc(unsigned int dram_size);
 #endif
 
+extern long int spd_sdram(void);
+
+void sdram_init(void);
+long int fixed_sdram(void);
 
-/* MPC8540ADS Board Status & Control Registers */
-#if 0
-typedef struct bscr_ {
-	unsigned long bcsr0;
-	unsigned long bcsr1;
-	unsigned long bcsr2;
-	unsigned long bcsr3;
-	unsigned long bcsr4;
-	unsigned long bcsr5;
-	unsigned long bcsr6;
-	unsigned long bcsr7;
-} bcsr_t;
-#endif
 
 int board_early_init_f (void)
 {
 #if defined(CONFIG_PCI)
-    volatile immap_t *immr = (immap_t *)CFG_IMMR;
-    volatile ccsr_pcix_t *pci = &immr->im_pcix;
+	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+	volatile ccsr_pcix_t *pci = &immr->im_pcix;
 
-    pci->peer &= 0xffffffdf; /* disable master abort */
+	pci->peer &= 0xffffffdf;	/* disable master abort */
 #endif
+
 	return 0;
 }
 
 int checkboard (void)
 {
 	puts("Board: ADS\n");
+
+#ifdef CONFIG_PCI
+	printf("    PCI1: 32 bit, %d MHz (compiled)\n",
+	       CONFIG_SYS_CLK_FREQ / 1000000);
+#else
+	printf("    PCI1: disabled\n");
+#endif
+
 	return 0;
 }
 
 
-long int initdram (int board_type)
+long int
+initdram(int board_type)
 {
 	long dram_size = 0;
 	extern long spd_sdram (void);
 	volatile immap_t *immap = (immap_t *)CFG_IMMR;
-#if !defined(CONFIG_RAM_AS_FLASH)
-	volatile ccsr_lbc_t *lbc= &immap->im_lbc;
-	sys_info_t sysinfo;
-	uint temp_lbcdll = 0;
-#endif
-#if !defined(CONFIG_RAM_AS_FLASH) || defined(CONFIG_DDR_DLL)
-	volatile ccsr_gur_t *gur= &immap->im_gur;
-#endif
 
-#if defined(CONFIG_DDR_DLL)
-       uint temp_ddrdll = 0;
+	puts("Initializing\n");
 
-	/* Work around to stabilize DDR DLL */
-	temp_ddrdll = gur->ddrdllcr;
-	gur->ddrdllcr = ((temp_ddrdll & 0xff) << 16) | 0x80000000;
-	asm("sync;isync;msync");
+#if defined(CONFIG_DDR_DLL)
+	{
+		volatile ccsr_gur_t *gur= &immap->im_gur;
+		uint temp_ddrdll = 0;
+
+		/*
+		* Work around to stabilize DDR DLL
+		*/
+		temp_ddrdll = gur->ddrdllcr;
+		gur->ddrdllcr = ((temp_ddrdll & 0xff) << 16) | 0x80000000;
+		asm("sync;isync;msync");
+	}
 #endif
 
 #if defined(CONFIG_SPD_EEPROM)
@@ -101,98 +96,120 @@ long int initdram (int board_type)
 	dram_size = fixed_sdram ();
 #endif
 
-#if !defined(CONFIG_RAM_AS_FLASH) /* LocalBus is not emulating flash */
-	get_sys_info(&sysinfo);
-	/* if localbus freq is less than 66Mhz,we use bypass mode,otherwise use DLL */
-	if(sysinfo.freqSystemBus/(CFG_LBC_LCRR & 0x0f) < 66000000) {
-		lbc->lcrr = (CFG_LBC_LCRR & 0x0fffffff)| 0x80000000;
+#if defined(CONFIG_DDR_ECC)
+	/*
+	 * Initialize and enable DDR ECC.
+	 */
+	ddr_enable_ecc(dram_size);
+#endif
+
+	/*
+	 * Initialize SDRAM.
+	 */
+	sdram_init();
+
+	puts("    DDR: ");
+	return dram_size;
+}
+
+
+/*
+ * Initialize SDRAM memory on the Local Bus.
+ */
+
+void sdram_init (void)
+{
+#if !defined(CONFIG_RAM_AS_FLASH)
+	sys_info_t sysinfo;
+	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile ccsr_lbc_t *lbc = &immap->im_lbc;
+	uint *sdram_addr = (uint *) CFG_LBC_SDRAM_BASE;
+
+	puts ("    SDRAM: ");
+	print_size (CFG_LBC_SDRAM_SIZE * 1024 * 1024, "\n");
+
+	/*
+	 * LocalBus SDRAM is not emulating flash.
+	 */
+
+	/*
+	 * Fix Local Bus clock glitch.  Errata LBC11.
+	 *
+	 * If localbus freq is less than 66Mhz, use bypass mode,
+	 * otherwise use DLL.
+	 * lcrr is the local-bus clock ratio register.
+	 */
+	get_sys_info (&sysinfo);
+	if (sysinfo.freqSystemBus / (CFG_LBC_LCRR & 0x0f) < 66000000) {
+		lbc->lcrr = (CFG_LBC_LCRR & 0x0fffffff) | 0x80000000;
+
 	} else {
-		uint pvr = get_pvr();
+		/*
+		 * On REV1 boards, need to change CLKDIV before enable DLL.
+		 * Default CLKDIV is 8, change it to 4 temporarily.
+		 */
+		volatile ccsr_gur_t *gur = &immap->im_gur;
+		uint pvr = get_pvr ();
+		uint temp_lbcdll = 0;
 
 		if (pvr == PVR_85xx_REV1) {
-			/*
-			 * Need change CLKDIV before enable DLL.
-			 * Default CLKDIV is 8, change it to 4
-			 * temporarily.
-			 */
-		    lbc->lcrr = 0x10000004;
+			lbc->lcrr = 0x10000004;
 		}
+
+		/* FIXME: jdl  Should lcrr have 0x8000000 OR'ed in here too? */
 		lbc->lcrr = CFG_LBC_LCRR & 0x7fffffff;
-		udelay(200);
+		udelay (200);
 		temp_lbcdll = gur->lbcdllcr;
-		gur->lbcdllcr = ((temp_lbcdll & 0xff) << 16 ) | 0x80000000;
-		asm("sync;isync;msync");
+		gur->lbcdllcr = ((temp_lbcdll & 0xff) << 16) | 0x80000000;
+		asm ("sync;isync;msync");
 	}
-	lbc->or2 = CFG_OR2_PRELIM; /* 64MB SDRAM */
+
+	/*
+	 * Setup SDRAM Base and Option Registers
+	 */
+	lbc->or2 = CFG_OR2_PRELIM;
 	lbc->br2 = CFG_BR2_PRELIM;
 	lbc->lbcr = CFG_LBC_LBCR;
+	asm ("msync");
+
+	lbc->lsrt = CFG_LBC_LSRT;
+	lbc->mrtpr = CFG_LBC_MRTPR;
+	asm ("sync");
+
+	/*
+	 * Configure the SDRAM controller.
+	 */
 	lbc->lsdmr = CFG_LBC_LSDMR_1;
-	asm("sync");
-	(unsigned int) * (ulong *)0 = 0x000000ff;
+	asm ("sync");
+	*sdram_addr = 0xff;
+	ppcDcbf ((unsigned long) sdram_addr);
+	udelay (100);
+
 	lbc->lsdmr = CFG_LBC_LSDMR_2;
-	asm("sync");
-	(unsigned int) * (ulong *)0 = 0x000000ff;
+	asm ("sync");
+	*sdram_addr = 0xff;
+	ppcDcbf ((unsigned long) sdram_addr);
+	udelay (100);
+
 	lbc->lsdmr = CFG_LBC_LSDMR_3;
-	asm("sync");
-	(unsigned int) * (ulong *)0 = 0x000000ff;
-	lbc->lsdmr = CFG_LBC_LSDMR_4;
-	asm("sync");
-	(unsigned int) * (ulong *)0 = 0x000000ff;
-	lbc->lsdmr = CFG_LBC_LSDMR_5;
-	asm("sync");
-	lbc->lsrt = CFG_LBC_LSRT;
-	asm("sync");
-	lbc->mrtpr = CFG_LBC_MRTPR;
-	asm("sync");
-#endif
+	asm ("sync");
+	*sdram_addr = 0xff;
+	ppcDcbf ((unsigned long) sdram_addr);
+	udelay (100);
 
-#if defined(CONFIG_DDR_ECC)
-	{
-		/* Initialize all of memory for ECC, then
-		 * enable errors */
-		uint *p = 0;
-		uint i = 0;
-		volatile immap_t *immap = (immap_t *)CFG_IMMR;
-		volatile ccsr_ddr_t *ddr= &immap->im_ddr;
-		dma_init();
-		for (*p = 0; p < (uint *)(8 * 1024); p++) {
-			if (((unsigned int)p & 0x1f) == 0) { dcbz(p); }
-			*p = (unsigned int)0xdeadbeef;
-			if (((unsigned int)p & 0x1c) == 0x1c) { dcbf(p); }
-		}
+	lbc->lsdmr = CFG_LBC_LSDMR_4;
+	asm ("sync");
+	*sdram_addr = 0xff;
+	ppcDcbf ((unsigned long) sdram_addr);
+	udelay (100);
 
-		/* 8K */
-		dma_xfer((uint *)0x2000,0x2000,(uint *)0);
-		/* 16K */
-		dma_xfer((uint *)0x4000,0x4000,(uint *)0);
-		/* 32K */
-		dma_xfer((uint *)0x8000,0x8000,(uint *)0);
-		/* 64K */
-		dma_xfer((uint *)0x10000,0x10000,(uint *)0);
-		/* 128k */
-		dma_xfer((uint *)0x20000,0x20000,(uint *)0);
-		/* 256k */
-		dma_xfer((uint *)0x40000,0x40000,(uint *)0);
-		/* 512k */
-		dma_xfer((uint *)0x80000,0x80000,(uint *)0);
-		/* 1M */
-		dma_xfer((uint *)0x100000,0x100000,(uint *)0);
-		/* 2M */
-		dma_xfer((uint *)0x200000,0x200000,(uint *)0);
-		/* 4M */
-		dma_xfer((uint *)0x400000,0x400000,(uint *)0);
-
-		for (i = 1; i < dram_size / 0x800000; i++) {
-			dma_xfer((uint *)(0x800000*i),0x800000,(uint *)0);
-		}
+	lbc->lsdmr = CFG_LBC_LSDMR_5;
+	asm ("sync");
+	*sdram_addr = 0xff;
+	ppcDcbf ((unsigned long) sdram_addr);
+	udelay (100);
 
-		/* Enable errors for ECC */
-		ddr->err_disable = 0x00000000;
-		asm("sync;isync;msync");
-	}
 #endif
-
-	return dram_size;
 }
 
 
@@ -262,6 +279,6 @@ long int fixed_sdram (void)
 	asm("sync; isync; msync");
 	udelay(500);
   #endif
-	return (CFG_SDRAM_SIZE * 1024 * 1024);
+	return CFG_SDRAM_SIZE * 1024 * 1024;
 }
 #endif	/* !defined(CONFIG_SPD_EEPROM) */
diff --git a/board/mpc8560ads/init.S b/board/mpc8560ads/init.S
index 486fdc8..99c4d79 100644
--- a/board/mpc8560ads/init.S
+++ b/board/mpc8560ads/init.S
@@ -45,7 +45,8 @@
 tlb1_entry:
 	entry_start
 
-	.long 0x0a	/* the following data table uses a few of 16 TLB entries */
+	/* Number of entries in the following table */
+	.long 0x0c
 
 	.long TLB1_MAS0(1,1,0)
 	.long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_1M)
@@ -116,40 +117,57 @@ tlb1_entry:
 
 	.long TLB1_MAS0(1,8,0)
 	.long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_256M)
-	.long TLB1_MAS2(((CFG_PCI_MEM_BASE>>12) & 0xfffff),0,0,0,0,1,0,1,0)
-	.long TLB1_MAS3(((CFG_PCI_MEM_BASE>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1)
+	.long TLB1_MAS2(((CFG_PCI1_MEM_BASE>>12) & 0xfffff),0,0,0,0,1,0,1,0)
+	.long TLB1_MAS3(((CFG_PCI1_MEM_BASE>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1)
 
 	.long TLB1_MAS0(1,9,0)
 	.long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_16K)
 	.long TLB1_MAS2(((CFG_BCSR>>12) & 0xfffff),0,0,0,0,1,0,1,0)
 	.long TLB1_MAS3(((CFG_BCSR>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1)
 
-  #if (CFG_CCSRBAR_DEFAULT != CFG_CCSRBAR)
+	/*
+	 * RapidIO MMU for 512M
+	 * Two entries, 10 and 11
+	 */
+	.long TLB1_MAS0(1,10,0)
+	.long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_256M)
+	.long TLB1_MAS2(((CFG_RIO_MEM_BASE>>12) & 0xfffff),0,0,0,0,1,0,1,0)
+	.long TLB1_MAS3(((CFG_RIO_MEM_BASE>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1)
+
+	.long TLB1_MAS0(1,11,0)
+	.long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_256M)
+	.long TLB1_MAS2(((CFG_RIO_MEM_BASE+0x10000000>>12) & 0xfffff),0,0,0,0,1,0,1,0)
+	.long TLB1_MAS3(((CFG_RIO_MEM_BASE+0x10000000>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1)
+
+
+#if (CFG_CCSRBAR_DEFAULT != CFG_CCSRBAR)
 	.long TLB1_MAS0(1,15,0)
 	.long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_1M)
 	.long TLB1_MAS2(((CFG_CCSRBAR_DEFAULT>>12) & 0xfffff),0,0,0,0,1,0,1,0)
 	.long TLB1_MAS3(((CFG_CCSRBAR_DEFAULT>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1)
-  #else
+#else
 	.long TLB1_MAS0(1,15,0)
 	.long TLB1_MAS1(0,0,0,0,BOOKE_PAGESZ_1M)
 	.long TLB1_MAS2(0,0,0,0,0,0,0,0,0)
 	.long TLB1_MAS3(0,0,0,0,0,0,1,0,1,0,1)
-  #endif
+#endif
 	entry_end
 
 /*
  * LAW(Local Access Window) configuration:
  *
  * 0x0000_0000     0x7fff_ffff     DDR                     2G
- * 0x8000_0000     0x9fff_ffff     PCI MEM                 512M
+ * 0x8000_0000     0x9fff_ffff     PCI1 MEM                512M
+ * 0xc000_0000     0xdfff_ffff     RapidIO                 512M
  * 0xe000_0000     0xe000_ffff     CCSR                    1M
- * 0xe200_0000     0xe2ff_ffff     PCI IO                  16M
+ * 0xe200_0000     0xe2ff_ffff     PCI1 IO                 16M
  * 0xf000_0000     0xf7ff_ffff     SDRAM                   128M
  * 0xf800_0000     0xf80f_ffff     BCSR                    1M
  * 0xff00_0000     0xffff_ffff     FLASH (boot bank)       16M
  *
- * Note: CCSRBAR and L2-as-SRAM don't need a configured Local Access Window.
- * Note: If flash is 8M at default position(last 8M),no LAW needed.
+ * Notes:
+ *    CCSRBAR and L2-as-SRAM don't need a configured Local Access Window.
+ *    If flash is 8M at default position (last 8M), no LAW needed.
  */
 
 #if !defined(CONFIG_SPD_EEPROM)
@@ -160,7 +178,7 @@ tlb1_entry:
 #define LAWAR0  ((LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & LAWAR_SIZE_128M)) & ~LAWAR_EN)
 #endif
 
-#define LAWBAR1 ((CFG_PCI_MEM_BASE>>12) & 0xfffff)
+#define LAWBAR1 ((CFG_PCI1_MEM_BASE>>12) & 0xfffff)
 #define LAWAR1	(LAWAR_EN | LAWAR_TRGT_IF_PCIX | (LAWAR_SIZE & LAWAR_SIZE_512M))
 
 /*
@@ -174,14 +192,14 @@ tlb1_entry:
 #define LAWAR2 ((LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_128M)) & ~LAWAR_EN)
 #endif
 
-#define LAWBAR3 ((CFG_PCI_IO_BASE>>12) & 0xfffff)
+#define LAWBAR3 ((CFG_PCI1_IO_BASE>>12) & 0xfffff)
 #define LAWAR3	(LAWAR_EN | LAWAR_TRGT_IF_PCIX | (LAWAR_SIZE & LAWAR_SIZE_16M))
 
 /*
  * Rapid IO at 0xc000_0000 for 512 M
  */
-#define LAWBAR4 ((CFG_RAPID_IO_BASE>>12) & 0xfffff)
-#define LAWAR4	(LAWAR_EN | LAWAR_TRGT_IF_PCIX | (LAWAR_SIZE & LAWAR_SIZE_512M))
+#define LAWBAR4 ((CFG_RIO_MEM_BASE>>12) & 0xfffff)
+#define LAWAR4	(LAWAR_EN | LAWAR_TRGT_IF_RIO | (LAWAR_SIZE & LAWAR_SIZE_512M))
 
 
 	.section .bootpg, "ax"
diff --git a/board/mpc8560ads/mpc8560ads.c b/board/mpc8560ads/mpc8560ads.c
index 2fa96e0..a0f6b97 100644
--- a/board/mpc8560ads/mpc8560ads.c
+++ b/board/mpc8560ads/mpc8560ads.c
@@ -25,8 +25,6 @@
  */
 
 
-extern long int spd_sdram (void);
-
 #include <common.h>
 #include <asm/processor.h>
 #include <asm/immap_85xx.h>
@@ -34,7 +32,15 @@ extern long int spd_sdram (void);
 #include <spd.h>
 #include <miiphy.h>
 
-long int fixed_sdram (void);
+#if defined(CONFIG_DDR_ECC)
+extern void ddr_enable_ecc(unsigned int dram_size);
+#endif
+
+extern long int spd_sdram(void);
+
+void sdram_init(void);
+long int fixed_sdram(void);
+
 
 /*
  * I/O Port configuration table
@@ -190,8 +196,11 @@ const iop_conf_t iop_conf_tab[4][32] = {
     }
 };
 
-/* MPC8560ADS Board Status & Control Registers */
-typedef struct bscr_ {
+
+/*
+ * MPC8560ADS Board Status & Control Registers
+ */
+typedef struct bcsr_ {
 	volatile unsigned char bcsr0;
 	volatile unsigned char bcsr1;
 	volatile unsigned char bcsr2;
@@ -203,11 +212,12 @@ typedef struct bscr_ {
 int board_early_init_f (void)
 {
 #if defined(CONFIG_PCI)
-    volatile immap_t *immr = (immap_t *)CFG_IMMR;
-    volatile ccsr_pcix_t *pci = &immr->im_pcix;
+	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+	volatile ccsr_pcix_t *pci = &immr->im_pcix;
 
-    pci->peer &= 0xfffffffdf; /* disable master abort */
+	pci->peer &= 0xffffffdf;	/* disable master abort */
 #endif
+
 	return 0;
 }
 
@@ -237,35 +247,41 @@ void reset_phy (void)
 #endif /* CONFIG_MII */
 }
 
-
 int checkboard (void)
 {
 	puts("Board: ADS\n");
+
+#ifdef CONFIG_PCI
+	printf("    PCI1: 32 bit, %d MHz (compiled)\n",
+	       CONFIG_SYS_CLK_FREQ / 1000000);
+#else
+	printf("    PCI1: disabled\n");
+#endif
 	return 0;
 }
 
 
-long int initdram (int board_type)
+long int
+initdram(int board_type)
 {
 	long dram_size = 0;
 	extern long spd_sdram (void);
 	volatile immap_t *immap = (immap_t *)CFG_IMMR;
-#if !defined(CONFIG_RAM_AS_FLASH)
-	volatile ccsr_lbc_t *lbc= &immap->im_lbc;
-	sys_info_t sysinfo;
-	uint temp_lbcdll = 0;
-#endif
-#if !defined(CONFIG_RAM_AS_FLASH) || defined(CONFIG_DDR_DLL)
-	volatile ccsr_gur_t *gur= &immap->im_gur;
-#endif
 
-#if defined(CONFIG_DDR_DLL)
-	uint temp_ddrdll = 0;
+	puts("Initializing\n");
 
-	/* Work around to stabilize DDR DLL */
-	temp_ddrdll = gur->ddrdllcr;
-	gur->ddrdllcr = ((temp_ddrdll & 0xff) << 16) | 0x80000000;
-	asm("sync;isync;msync");
+#if defined(CONFIG_DDR_DLL)
+	{
+		volatile ccsr_gur_t *gur= &immap->im_gur;
+		uint temp_ddrdll = 0;
+
+		/*
+		* Work around to stabilize DDR DLL
+		*/
+		temp_ddrdll = gur->ddrdllcr;
+		gur->ddrdllcr = ((temp_ddrdll & 0xff) << 16) | 0x80000000;
+		asm("sync;isync;msync");
+	}
 #endif
 
 #if defined(CONFIG_SPD_EEPROM)
@@ -274,98 +290,120 @@ long int initdram (int board_type)
 	dram_size = fixed_sdram ();
 #endif
 
-#if !defined(CONFIG_RAM_AS_FLASH) /* LocalBus SDRAM is not emulating flash */
-	get_sys_info(&sysinfo);
-	/* if localbus freq is less than 66Mhz,we use bypass mode,otherwise use DLL */
-	if(sysinfo.freqSystemBus/(CFG_LBC_LCRR & 0x0f) < 66000000) {
-		lbc->lcrr = (CFG_LBC_LCRR & 0x0fffffff)| 0x80000000;
+#if defined(CONFIG_DDR_ECC)
+	/*
+	 * Initialize and enable DDR ECC.
+	 */
+	ddr_enable_ecc(dram_size);
+#endif
+
+	/*
+	 * Initialize SDRAM.
+	 */
+	sdram_init();
+
+	puts("    DDR: ");
+	return dram_size;
+}
+
+
+/*
+ * Initialize SDRAM memory on the Local Bus.
+ */
+
+void sdram_init (void)
+{
+#if !defined(CONFIG_RAM_AS_FLASH)
+	sys_info_t sysinfo;
+	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile ccsr_lbc_t *lbc = &immap->im_lbc;
+	uint *sdram_addr = (uint *) CFG_LBC_SDRAM_BASE;
+
+	puts ("    SDRAM: ");
+	print_size (CFG_LBC_SDRAM_SIZE * 1024 * 1024, "\n");
+
+	/*
+	 * LocalBus SDRAM is not emulating flash.
+	 */
+
+	/*
+	 * Fix Local Bus clock glitch.  Errata LBC11.
+	 *
+	 * If localbus freq is less than 66Mhz, use bypass mode,
+	 * otherwise use DLL.
+	 * lcrr is the local-bus clock ratio register.
+	 */
+	get_sys_info (&sysinfo);
+	if (sysinfo.freqSystemBus / (CFG_LBC_LCRR & 0x0f) < 66000000) {
+		lbc->lcrr = (CFG_LBC_LCRR & 0x0fffffff) | 0x80000000;
+
 	} else {
-		uint pvr = get_pvr();
+		/*
+		 * On REV1 boards, need to change CLKDIV before enable DLL.
+		 * Default CLKDIV is 8, change it to 4 temporarily.
+		 */
+		volatile ccsr_gur_t *gur = &immap->im_gur;
+		uint pvr = get_pvr ();
+		uint temp_lbcdll = 0;
 
 		if (pvr == PVR_85xx_REV1) {
-			/*
-			 * Need change CLKDIV before enable DLL.
-			 * Default CLKDIV is 8, change it to 4
-			 * temporarily.
-			 */
-		    lbc->lcrr = 0x10000004;
+			lbc->lcrr = 0x10000004;
 		}
+
+		/* FIXME: jdl  Should lcrr have 0x8000000 OR'ed in here too? */
 		lbc->lcrr = CFG_LBC_LCRR & 0x7fffffff;
-		udelay(200);
+		udelay (200);
 		temp_lbcdll = gur->lbcdllcr;
-		gur->lbcdllcr = ((temp_lbcdll & 0xff) << 16 ) | 0x80000000;
-		asm("sync;isync;msync");
+		gur->lbcdllcr = ((temp_lbcdll & 0xff) << 16) | 0x80000000;
+		asm ("sync;isync;msync");
 	}
-	lbc->or2 = CFG_OR2_PRELIM; /* 64MB SDRAM */
+
+	/*
+	 * Setup SDRAM Base and Option Registers
+	 */
+	lbc->or2 = CFG_OR2_PRELIM;
 	lbc->br2 = CFG_BR2_PRELIM;
 	lbc->lbcr = CFG_LBC_LBCR;
+	asm ("msync");
+
+	lbc->lsrt = CFG_LBC_LSRT;
+	lbc->mrtpr = CFG_LBC_MRTPR;
+	asm ("sync");
+
+	/*
+	 * Configure the SDRAM controller.
+	 */
 	lbc->lsdmr = CFG_LBC_LSDMR_1;
-	asm("sync");
-	(unsigned int) * (ulong *)0 = 0x000000ff;
+	asm ("sync");
+	*sdram_addr = 0xff;
+	ppcDcbf ((unsigned long) sdram_addr);
+	udelay (100);
+
 	lbc->lsdmr = CFG_LBC_LSDMR_2;
-	asm("sync");
-	(unsigned int) * (ulong *)0 = 0x000000ff;
+	asm ("sync");
+	*sdram_addr = 0xff;
+	ppcDcbf ((unsigned long) sdram_addr);
+	udelay (100);
+
 	lbc->lsdmr = CFG_LBC_LSDMR_3;
-	asm("sync");
-	(unsigned int) * (ulong *)0 = 0x000000ff;
-	lbc->lsdmr = CFG_LBC_LSDMR_4;
-	asm("sync");
-	(unsigned int) * (ulong *)0 = 0x000000ff;
-	lbc->lsdmr = CFG_LBC_LSDMR_5;
-	asm("sync");
-	lbc->lsrt = CFG_LBC_LSRT;
-	asm("sync");
-	lbc->mrtpr = CFG_LBC_MRTPR;
-	asm("sync");
-#endif
+	asm ("sync");
+	*sdram_addr = 0xff;
+	ppcDcbf ((unsigned long) sdram_addr);
+	udelay (100);
 
-#if defined(CONFIG_DDR_ECC)
-	{
-		/* Initialize all of memory for ECC, then
-		 * enable errors */
-		uint *p = 0;
-		uint i = 0;
-		volatile immap_t *immap = (immap_t *)CFG_IMMR;
-		volatile ccsr_ddr_t *ddr= &immap->im_ddr;
-		dma_init();
-		for (*p = 0; p < (uint *)(8 * 1024); p++) {
-			if (((unsigned int)p & 0x1f) == 0) { dcbz(p); }
-			*p = (unsigned int)0xdeadbeef;
-			if (((unsigned int)p & 0x1c) == 0x1c) { dcbf(p); }
-		}
+	lbc->lsdmr = CFG_LBC_LSDMR_4;
+	asm ("sync");
+	*sdram_addr = 0xff;
+	ppcDcbf ((unsigned long) sdram_addr);
+	udelay (100);
 
-		/* 8K */
-		dma_xfer((uint *)0x2000,0x2000,(uint *)0);
-		/* 16K */
-		dma_xfer((uint *)0x4000,0x4000,(uint *)0);
-		/* 32K */
-		dma_xfer((uint *)0x8000,0x8000,(uint *)0);
-		/* 64K */
-		dma_xfer((uint *)0x10000,0x10000,(uint *)0);
-		/* 128k */
-		dma_xfer((uint *)0x20000,0x20000,(uint *)0);
-		/* 256k */
-		dma_xfer((uint *)0x40000,0x40000,(uint *)0);
-		/* 512k */
-		dma_xfer((uint *)0x80000,0x80000,(uint *)0);
-		/* 1M */
-		dma_xfer((uint *)0x100000,0x100000,(uint *)0);
-		/* 2M */
-		dma_xfer((uint *)0x200000,0x200000,(uint *)0);
-		/* 4M */
-		dma_xfer((uint *)0x400000,0x400000,(uint *)0);
-
-		for (i = 1; i < dram_size / 0x800000; i++) {
-			dma_xfer((uint *)(0x800000*i),0x800000,(uint *)0);
-		}
+	lbc->lsdmr = CFG_LBC_LSDMR_5;
+	asm ("sync");
+	*sdram_addr = 0xff;
+	ppcDcbf ((unsigned long) sdram_addr);
+	udelay (100);
 
-		/* Enable errors for ECC */
-		ddr->err_disable = 0x00000000;
-		asm("sync;isync;msync");
-	}
 #endif
-
-	return dram_size;
 }
 
 
@@ -403,6 +441,7 @@ int testdram (void)
 }
 #endif
 
+
 #if !defined(CONFIG_SPD_EEPROM)
 /*************************************************************************
  *  fixed sdram init -- doesn't use serial presence detect.
@@ -434,6 +473,6 @@ long int fixed_sdram (void)
 	asm("sync; isync; msync");
 	udelay(500);
   #endif
-	return ( CFG_SDRAM_SIZE * 1024 * 1024);
+	return CFG_SDRAM_SIZE * 1024 * 1024;
 }
 #endif	/* !defined(CONFIG_SPD_EEPROM) */
diff --git a/cpu/mpc85xx/cpu.c b/cpu/mpc85xx/cpu.c
index 55593d9..8eb9317 100644
--- a/cpu/mpc85xx/cpu.c
+++ b/cpu/mpc85xx/cpu.c
@@ -174,16 +174,6 @@ reset_85xx_watchdog(void)
 #endif	/* CONFIG_WATCHDOG */
 
 #if defined(CONFIG_DDR_ECC)
-__inline__ void dcbz(const void* addr)
-{
-	__asm__ __volatile__ ("dcbz 0,%0" :: "r" (addr));
-}
-
-__inline__ void dcbf(const void* addr)
-{
-	__asm__ __volatile__ ("dcbf 0,%0" :: "r" (addr));
-}
-
 void dma_init(void) {
 	volatile immap_t *immap = (immap_t *)CFG_IMMR;
 	volatile ccsr_dma_t *dma = &immap->im_dma;
diff --git a/cpu/mpc85xx/pci.c b/cpu/mpc85xx/pci.c
index 5732c29..11f0c3e 100644
--- a/cpu/mpc85xx/pci.c
+++ b/cpu/mpc85xx/pci.c
@@ -1,4 +1,5 @@
 /*
+ * Copyright 2004 Freescale Semiconductor.
  * Copyright (C) 2003 Motorola Inc.
  * Xianghua Xiao (x.xiao@motorola.com)
  *
@@ -28,17 +29,23 @@
 #include <asm/cpm_85xx.h>
 #include <pci.h>
 
+
 #if defined(CONFIG_PCI)
+
+
 /*
  * Initialize PCI Devices, report devices found.
  */
+
 #ifndef CONFIG_PCI_PNP
 static struct pci_config_table pci_mpc85xxads_config_table[] = {
-	{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_IDSEL_NUMBER, PCI_ANY_ID,
-	  pci_cfgfunc_config_device, { PCI_ENET0_IOADDR,
-				       PCI_ENET0_MEMADDR,
-				       PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER }},
-	{ }
+	{PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
+	 PCI_IDSEL_NUMBER, PCI_ANY_ID,
+	 pci_cfgfunc_config_device, {PCI_ENET0_IOADDR,
+				     PCI_ENET0_MEMADDR,
+				     PCI_COMMAND_MEMORY |
+				     PCI_COMMAND_MASTER}},
+	{}
 };
 #endif
 
@@ -48,60 +55,61 @@ struct pci_controller local_hose = {
 #endif
 };
 
-void pci_init_board(void)
-{
-    struct pci_controller* hose = (struct pci_controller *)&local_hose;
-    volatile immap_t    *immap = (immap_t *)CFG_CCSRBAR;
-    volatile ccsr_pcix_t *pcix = &immap->im_pcix;
-
-    u16 reg16;
-
-    hose->first_busno = 0;
-    hose->last_busno = 0xff;
-
-    pci_set_region(hose->regions + 0,
-	CFG_PCI_MEM_BASE,
-	CFG_PCI_MEM_PHYS,
-	(CFG_PCI_MEM_SIZE/2),
-	PCI_REGION_MEM);
-
-    pci_set_region(hose->regions + 1,
-	(CFG_PCI_MEM_BASE+0x08000000),
-	(CFG_PCI_MEM_PHYS+0x08000000),
-	0x1000000, /* 16M */
-	PCI_REGION_IO);
-
-    hose->region_count = 2;
-
-    pci_setup_indirect(hose,
-	(CFG_IMMR+0x8000),
-	(CFG_IMMR+0x8004));
-
-    pci_register_hose(hose);
-
-    hose->last_busno = pci_hose_scan(hose);
-
-    pci_read_config_word (PCI_BDF(0,0,0), PCI_COMMAND, &reg16);
-    reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
-    pci_write_config_word(PCI_BDF(0,0,0), PCI_COMMAND, reg16);
-
-    /* Clear non-reserved bits in status register */
-    pci_write_config_word(PCI_BDF(0,0,0), PCI_STATUS, 0xffff);
-    pci_write_config_byte(PCI_BDF(0,0,0), PCI_LATENCY_TIMER,0x80);
-
-    pcix->potar1   = (CFG_PCI_MEM_BASE >> 12) & 0x000fffff;
-    pcix->potear1  = 0x00000000;
-    pcix->powbar1  = (CFG_PCI_MEM_BASE >> 12) & 0x000fffff;
-    pcix->powbear1 = 0x00000000;
-    pcix->powar1   = 0x8004401a; /* 128M MEM space */
-    pcix->potar2   = ((CFG_PCI_MEM_BASE + 0x08000000) >> 12)  & 0x000fffff;
-    pcix->potear2  = 0x00000000;
-    pcix->powbar2  = ((CFG_PCI_MEM_BASE + 0x08000000) >> 12) && 0x000fffff;
-    pcix->powbear2 = 0x00000000;
-    pcix->powar2   = 0x80088017; /* 16M IO  space */
-    pcix->pitar1 = 0x00000000;
-    pcix->piwbar1 = 0x00000000;
-    pcix->piwar1 = 0xa0F5501f;
 
+void pci_init_board (void)
+{
+	struct pci_controller *hose = (struct pci_controller *) &local_hose;
+	volatile immap_t *immap = (immap_t *) CFG_CCSRBAR;
+	volatile ccsr_pcix_t *pcix = &immap->im_pcix;
+
+	u16 reg16;
+
+	hose->first_busno = 0;
+	hose->last_busno = 0xff;
+
+	pci_set_region (hose->regions + 0,
+			CFG_PCI1_MEM_BASE,
+			CFG_PCI1_MEM_PHYS, CFG_PCI1_MEM_SIZE, PCI_REGION_MEM);
+
+	pci_set_region (hose->regions + 1,
+			CFG_PCI1_IO_BASE,
+			CFG_PCI1_IO_PHYS, CFG_PCI1_IO_SIZE, PCI_REGION_IO);
+
+	hose->region_count = 2;
+
+	pci_setup_indirect (hose, (CFG_IMMR + 0x8000), (CFG_IMMR + 0x8004));
+
+	pci_read_config_word (PCI_BDF (0, 0, 0), PCI_COMMAND, &reg16);
+	reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
+	pci_write_config_word (PCI_BDF (0, 0, 0), PCI_COMMAND, reg16);
+
+	/*
+	 * Clear non-reserved bits in status register.
+	 */
+	pci_write_config_word (PCI_BDF (0, 0, 0), PCI_STATUS, 0xffff);
+	pci_write_config_byte (PCI_BDF (0, 0, 0), PCI_LATENCY_TIMER, 0x80);
+
+	pcix->potar1 = (CFG_PCI1_MEM_BASE >> 12) & 0x000fffff;
+	pcix->potear1 = 0x00000000;
+	pcix->powbar1 = (CFG_PCI1_MEM_BASE >> 12) & 0x000fffff;
+	pcix->powbear1 = 0x00000000;
+	pcix->powar1 = 0x8004401c;	/* 512M MEM space */
+
+	pcix->potar2 = (CFG_PCI1_IO_BASE >> 12) & 0x000fffff;
+	pcix->potear2 = 0x00000000;
+	pcix->powbar2 = (CFG_PCI1_IO_BASE >> 12) & 0x000fffff;
+	pcix->powbear2 = 0x00000000;
+	pcix->powar2 = 0x80088017;	/* 16M IO space */
+
+	pcix->pitar1 = 0x00000000;
+	pcix->piwbar1 = 0x00000000;
+	pcix->piwar1 = 0xa0F5501f;
+
+	/*
+	 * Hose scan.
+	 */
+	pci_register_hose (hose);
+	hose->last_busno = pci_hose_scan (hose);
 }
+
 #endif /* CONFIG_PCI */
diff --git a/cpu/mpc85xx/start.S b/cpu/mpc85xx/start.S
index 040b88d..885f1ab 100644
--- a/cpu/mpc85xx/start.S
+++ b/cpu/mpc85xx/start.S
@@ -130,7 +130,6 @@ _start_e500:
 	/* disable d-cache */
 	li	r0,0x0
 	mtspr	L1CSR0,r0
-	isync
 
 	/* invalidate i-cache */
 	mfspr	r0,L1CSR1
@@ -144,7 +143,6 @@ _start_e500:
 	isync
 
 	/* clear registers */
-	sync
 	li	r0,0
 	mtspr	SRR0,r0
 	mtspr	SRR1,r0
@@ -158,11 +156,8 @@ _start_e500:
 	mtspr	DEAR,r0
 
 	mtspr	DBCR0,r0
-	isync
 	mtspr	DBCR1,r0
-	isync
 	mtspr	DBCR2,r0
-	isync
 	mtspr	IAC1,r0
 	mtspr	IAC2,r0
 	mtspr	DAC1,r0
@@ -171,26 +166,13 @@ _start_e500:
 	mfspr	r1,DBSR
 	mtspr	DBSR,r1		/* Clear all valid bits */
 
-	isync
 	mtspr	PID0,r0
-	isync
 	mtspr	PID1,r0
-	isync
 	mtspr	PID2,r0
-	isync
-
 	mtspr	TCR,r0
 
 	mtspr	BUCSR,r0	/* disable branch prediction */
-	isync
-
-	mtspr	HID0,r0
-	isync
-	mtspr	HID1,r0
-	isync
-
 	mtspr   MAS4,r0
-	isync
 	mtspr   MAS6,r0
 	isync
 
@@ -376,9 +358,9 @@ _start:
 	isync
 
 	/* Enable Time Base and Select Time Base Clock */
-	li	r0,0x4000		/* time base is processor clock */
+	lis	r0,HID0_EMCP@h		/* Enable machine check */
+	ori	r0,r0,0x4000		/* time base is processor clock */
 	mtspr	HID0,r0
-	isync
 
 #if defined(CONFIG_ADDR_STREAMING)
 	li	r0,0x3000
@@ -386,31 +368,26 @@ _start:
 	li	r0,0x1000
 #endif
 	mtspr	HID1,r0
-	isync
 
 	/* Enable Branch Prediction */
 #if defined(CONFIG_BTB)
 	li	r0,0x201		/* BBFI = 1, BPEN = 1 */
 	mtspr	BUCSR,r0
-	isync
 #endif
 
 #if defined(CFG_INIT_DBCR)
 	lis	r1,0xffff
 	ori	r1,r1,0xffff
-	mtspr	dbsr,r1			/* Clear all status bits */
+	mtspr	DBSR,r1			/* Clear all status bits */
 	lis	r0,CFG_INIT_DBCR@h	/* DBCR0[IDM] must be set */
 	ori	r0,r0,CFG_INIT_DBCR@l
-	mtspr	dbcr0,r0
-	isync
+	mtspr	DBCR0,r0
 #endif
 
 /* L1 DCache is used for initial RAM */
 	mfspr	r2, L1CSR0
 	ori    	r2, r2, 0x0003
 	oris   	r2, r2, 0x0001
-	msync
-	isync
 	mtspr  	L1CSR0, r2	/* enable/invalidate L1 Dcache */
 	isync
 
@@ -457,8 +434,7 @@ in_flash:
 	bl	cpu_init_f
 	bl	icache_enable
 	bl	board_init_f
-	sync
-
+	isync
 
 /* --FIXME-- machine check with MCSRRn and rfmci */
 
@@ -922,6 +898,18 @@ ppcDcbi:
 	dcbi	r0,r3
 	blr
 
+/*--------------------------------------------------------------------------
+ * Function:	 ppcDcbz
+ * Description:	 Data Cache block zero.
+ * Input:	 r3 = effective address
+ * Output:	 none.
+ *-------------------------------------------------------------------------- */
+
+	.globl	ppcDcbz
+ppcDcbz:
+	dcbz	r0,r3
+	blr
+
 /*------------------------------------------------------------------------------- */
 /* Function:	 ppcSync */
 /* Description:	 Processor Synchronize */
diff --git a/doc/README.mpc85xxads b/doc/README.mpc85xxads
index c49b2a8..1bbaa54 100644
--- a/doc/README.mpc85xxads
+++ b/doc/README.mpc85xxads
@@ -15,7 +15,7 @@ http://ftp.gnu.org/gnu/binutils.
     shipped with your board. Then apply the following changes:
     SW3[1-6]="all OFF"  (boot from 32bit flash, no boot sequence is used)
     SW10[2-6]="all OFF" (turn on CPM SCC for serial port,works for 8540/8560)
-    SW11[2]='OFF for 8560, ON for 8540' (single switch to toggle 8540.8560 mode)
+    SW11[2]='OFF for 8560, ON for 8540' (toggle 8540.8560 mode)
     SW11[7]='ON' (rev2), 'OFF' (rev1)
     SW4[7-8]="OFF OFF" (enable serial ports,I'm using the top serial connector)
     SW22[1-4]="OFF OFF ON OFF"
@@ -26,7 +26,8 @@ http://ftp.gnu.org/gnu/binutils.
     have to change the system clock from the default 66Mhz to 33Mhz by
     setting SW15[1]="OFF" and SW17[8]="OFF". After that you may also need
     double your platform clock(SW6) because the system clock is now only
-    half of its original value.
+    half of its original value. For example, if at 66MHz your system
+    clock showed SW6[0:1] = 01, then at 33MHz SW6[0:1] it should be 10.
 
 1.3 SW6 is a very important switch, it decides your platform clock and CPU
     clock based on the on-board system clock(default 66MHz). Check the
@@ -42,7 +43,7 @@ http://ftp.gnu.org/gnu/binutils.
      0x0000_0000     0x7fff_ffff     DDR                     2G
      0x8000_0000     0x9fff_ffff     PCI MEM                 512M
      0xc000_0000     0xdfff_ffff     Rapid IO                512M
-     0xe000_0000     0xe000_ffff     CCSR                    1M
+     0xe000_0000     0xe00f_ffff     CCSR                    1M
      0xe200_0000     0xe2ff_ffff     PCI IO                  16M
      0xf000_0000     0xf7ff_ffff     SDRAM                   128M
      0xf800_0000     0xf80f_ffff     BCSR                    1M
@@ -56,11 +57,12 @@ http://ftp.gnu.org/gnu/binutils.
 	arch/ppc/configs/mpc8540_ads_defconfig
 	arch/ppc/configs/mpc8560_ads_defconfig
 
-
 3. DEFINITIONS AND COMPILATION
 
-3.1 Explanation on NEW definitions in include/configs/MPC8540ADS.h and include/
-    configs/MPC8560ADS.h
+3.1 Explanation on NEW definitions in:
+	include/configs/MPC8540ADS.h
+	include/configs/MPC8560ADS.h
+
     CONFIG_BOOKE            BOOKE(e.g. Motorola MPC85xx, IBM 440, etc)
     CONFIG_E500             BOOKE e500 family(Motorola)
     CONFIG_MPC85xx          MPC8540,MPC8560 and their derivatives
@@ -69,49 +71,63 @@ http://ftp.gnu.org/gnu/binutils.
     CONFIG_MPC8540ADS       MPC8540ADS board specific
     CONFIG_MPC8560ADS       MPC8560ADS board specific
     CONFIG_TSEC_ENET        Use on-chip 10/100/1000 ethernet for networking
-    CONFIG_SPD_EEPROM       Use SPD EEPROM for DDR auto configuration, you can also
-			    manual config the DDR after undef this definition.
+    CONFIG_SPD_EEPROM       Use SPD EEPROM for DDR auto configuration, you can
+ 			    also manual config the DDR after undef this
+			    definition.
     CONFIG_DDR_ECC          only for ECC DDR module
-    CONFIG_DDR_DLL          DLL fix on some ADS boards needed for more stability.
-    CONFIG_RAM_AS_FLASH     after define this, you can load U-Boot into localbus
-			    SDRAM and treat localbus SDRAM as a flash. We use this
-			    memory based U-Boot before flash is working while Metrowerks
-			    and Windriver are still working on their flash/JTAG tools.
-			    if you can program the flash directly, undef this.
-    Other than the above definitions, the rest in the config files are straightforward.
+    CONFIG_DDR_DLL          DLL fix on some ADS boards needed for more
+			    stability.
+    CONFIG_RAM_AS_FLASH     after define this, you can load U-Boot into
+			    localbus SDRAM and treat localbus SDRAM as a
+			    flash. We use this memory based U-Boot
+			    before flash is working while Metrowerks and
+			    Windriver are still working on their
+			    flash/JTAG tools.  if you can program the
+			    flash directly, undef this.
+
+Other than the above definitions, the rest in the config files are
+straightforward.
+
 
 3.2 Compilation
-   export CROSS_COMPILE=your-cross-compile-prefix(assuming you're using BASH shell)
-   cd u-boot
-   make distclean
-   make MPC8560ADS_config (or make MPC8540ADS_config)
-   make
 
+    Assuming you're using BASH shell:
+
+	export CROSS_COMPILE=your-cross-compile-prefix
+	cd u-boot
+	make distclean
+	make MPC8560ADS_config (or make MPC8540ADS_config)
+	make
 
 4.  Notes:
 
 4.1 When connecting with kermit, the following commands must be present.in
-   your .kermrc file. These are especially important when booting as
-   MPC8560, as the serial console will not work without them:
-
-set speed 115200
-set carrier-watch off
-set handshake none
-set flow-control none
-robust
-
-4.2 Sometimes after U-Boot is up, the 'tftp' won't work well with TSEC ethernet. If that
-   happens, you can try the following steps to make network work:
-   MPC8560ADS>tftp 1000000 pImage
-   (if it hangs, use Ctrl-C to quit)
-   MPC8560ADS>nm fdf24524
-   >0
-   >1
-   >. (to quit this memory operation)
-   MPC8560ADS>tftp 1000000 pImage
-
-4.3 If you're one of the early developers using the Rev1 8540/8560 chips, please use U-Boot
-   1.0.0, as the newer silicon will only support Rev2 and future revisions of 8540/8560.
+    your .kermrc file. These are especially important when booting as
+    MPC8560, as the serial console will not work without them:
+
+	set speed 115200
+	set carrier-watch off
+	set handshake none
+	set flow-control none
+	robust
+
+
+4.2 Sometimes after U-Boot is up, the 'tftp' won't work well with TSEC
+    ethernet. If that happens, you can try the following steps to make
+    network work:
+
+	MPC8560ADS>tftp 1000000 pImage
+	(if it hangs, use Ctrl-C to quit)
+	MPC8560ADS>nm fdf24524
+	>0
+	>1
+	>. (to quit this memory operation)
+	MPC8560ADS>tftp 1000000 pImage
+
+4.3 If you're one of the early developers using the Rev1 8540/8560 chips,
+    please use U-Boot 1.0.0, as the newer silicon will only support Rev2
+    and future revisions of 8540/8560.
+
 
 4.4 Reflash U-boot Image using U-boot
 
@@ -121,8 +137,14 @@ robust
     => cp.b 0 fff80000 80000
 
 
-5. Screen dump:
+4.5 Reflash U-Boot with a BDI-2000
 
+    BDI> erase 0xFFF80000 0x2000 0x40
+    BDI> prog 0xfff80000 u-boot.bin.8560ads
+    BDI> verify
+
+
+5. Screen dump:
 5.1 MPC8540ADS board
 U-Boot 1.0.0-pre (Oct 15 2003 - 13:40:33)
 
diff --git a/include/asm-ppc/mmu.h b/include/asm-ppc/mmu.h
index 98de51b..2606b79 100644
--- a/include/asm-ppc/mmu.h
+++ b/include/asm-ppc/mmu.h
@@ -440,7 +440,9 @@ extern int write_bat(ppc_bat_t bat, unsigned long upper, unsigned long lower);
 #define LAWAR_SIZE		0x0000003F
 
 #define LAWAR_TRGT_IF_PCI	0x00000000
+#define LAWAR_TRGT_IF_PCI1	0x00000000
 #define LAWAR_TRGT_IF_PCIX	0x00000000
+#define LAWAR_TRGT_IF_PCI2	0x00100000
 #define LAWAR_TRGT_IF_LBC	0x00400000
 #define LAWAR_TRGT_IF_CCSR	0x00800000
 #define LAWAR_TRGT_IF_RIO	0x00c00000
diff --git a/include/asm-ppc/processor.h b/include/asm-ppc/processor.h
index 5b3ff75..f7d90f4 100644
--- a/include/asm-ppc/processor.h
+++ b/include/asm-ppc/processor.h
@@ -280,7 +280,6 @@
 #define SPRN_PMC2	0x3BA	/* Performance Counter Register 2 */
 #define SPRN_PMC3	0x3BD	/* Performance Counter Register 3 */
 #define SPRN_PMC4	0x3BE	/* Performance Counter Register 4 */
-#define SPRN_SVR	0x11E	/* System-On-Chip Version Register */
 #define SPRN_PVR	0x11F	/* Processor Version Register */
 #define SPRN_RPA	0x3D6	/* Required Physical Address Register */
 #define SPRN_SDA	0x3BF	/* Sampled Data Address Register */
@@ -297,6 +296,11 @@
 #define SPRN_SRR1	0x01B	/* Save/Restore Register 1 */
 #define SPRN_SRR2	0x3DE	/* Save/Restore Register 2 */
 #define SPRN_SRR3 	0x3DF	/* Save/Restore Register 3 */
+#ifdef CONFIG_BOOKE
+#define SPRN_SVR	0x3FF	/* System Version Register */
+#else
+#define SPRN_SVR	0x11E	/* System Version Register */
+#endif
 #define SPRN_TBHI	0x3DC	/* Time Base High */
 #define SPRN_TBHU	0x3CC	/* Time Base High User-mode */
 #define SPRN_TBLO	0x3DD	/* Time Base Low */
@@ -511,6 +515,7 @@
 #define SPRG3   SPRN_SPRG3
 #define SRR0	SPRN_SRR0	/* Save and Restore Register 0 */
 #define SRR1	SPRN_SRR1	/* Save and Restore Register 1 */
+#define SVR	SPRN_SVR	/* System Version Register */
 #define TBRL	SPRN_TBRL	/* Time Base Read Lower Register */
 #define TBRU	SPRN_TBRU	/* Time Base Read Upper Register */
 #define TBWL	SPRN_TBWL	/* Time Base Write Lower Register */
@@ -731,8 +736,11 @@
 #define PVR_7400        0x000C0000
 #define PVR_7410        0x800C0000
 #define PVR_7450        0x80000000
-#define PVR_8540        0x80200010
-#define PVR_8560        0x80200010
+
+#define PVR_85xx	0x80200000
+#define PVR_85xx_REV1	(PVR_85xx | 0x0010)
+#define PVR_85xx_REV2	(PVR_85xx | 0x0020)
+
 
 /*
  * For the 8xx processors, all of them report the same PVR family for
@@ -757,6 +765,33 @@
 #define PVR_8260_HIP7   0x80822011
 #define PVR_8260_HIP7R1 0x80822013
 
+
+/*
+ * System Version Register
+ */
+
+/* System Version Register (SVR) field extraction */
+
+#define SVR_VER(svr)	(((svr) >>  16) & 0xFFFF)	/* Version field */
+#define SVR_REV(svr)	(((svr) >>   0) & 0xFFFF)	/* Revison field */
+
+#define SVR_FAM(svr)	(((svr) >> 20) & 0xFFF)	/* Family field */
+#define SVR_MEM(svr)	(((svr) >> 16) & 0xF)	/* Member field */
+
+#define SVR_MAJ(svr)	(((svr) >>  4) & 0xF)	/* Major revision field*/
+#define SVR_MIN(svr)	(((svr) >>  0) & 0xF)	/* Minor revision field*/
+
+
+/*
+ * SVR_VER() Version Values
+ */
+
+#define SVR_8540	0x8030
+#define SVR_8560	0x8070
+#define SVR_8555	0x8079
+#define SVR_8541	0x807A
+
+
 /* I am just adding a single entry for 8260 boards.  I think we may be
  * able to combine mbx, fads, rpxlite, bseip, and classic into a single
  * generic 8xx as well.  The boards containing these processors are either
diff --git a/include/common.h b/include/common.h
index 71dd1d9..8ab8432 100644
--- a/include/common.h
+++ b/include/common.h
@@ -342,7 +342,8 @@ void	trap_init     (ulong);
     defined (CONFIG_74xx_7xx)	|| \
     defined (CONFIG_74x)	|| \
     defined (CONFIG_75x)	|| \
-    defined (CONFIG_74xx)
+    defined (CONFIG_74xx)	|| \
+    defined(CONFIG_MPC85xx)
 unsigned char	in8(unsigned int);
 void		out8(unsigned int, unsigned char);
 unsigned short	in16(unsigned int);
@@ -356,6 +357,7 @@ void		out32r(unsigned int, unsigned long value);
 void		ppcDcbf(unsigned long value);
 void		ppcDcbi(unsigned long value);
 void		ppcSync(void);
+void		ppcDcbz(unsigned long value);
 #endif
 
 /* $(CPU)/cpu.c */
diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h
index 2f1bb48..b967b1e 100644
--- a/include/configs/MPC8540ADS.h
+++ b/include/configs/MPC8540ADS.h
@@ -1,4 +1,5 @@
 /*
+ * Copyright 2004 Freescale Semiconductor.
  * (C) Copyright 2002,2003 Motorola,Inc.
  * Xianghua Xiao <X.Xiao@motorola.com>
  *
@@ -21,209 +22,346 @@
  * MA 02111-1307 USA
  */
 
-/* mpc8540ads board configuration file */
-/* please refer to doc/README.mpc85xxads for more info */
-/* make sure you change the MAC address and other network params first,
- * search for CONFIG_ETHADDR,CONFIG_SERVERIP,etc in this file
+/*
+ * mpc8540ads board configuration file
+ *
+ * Please refer to doc/README.mpc85xx for more info.
+ *
+ * Make sure you change the MAC address and other network params first,
+ * search for CONFIG_ETHADDR, CONFIG_SERVERIP, etc in this file.
  */
 
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
 /* High Level Configuration Options */
-#define CONFIG_BOOKE		1	    /* BOOKE			*/
-#define CONFIG_E500		1	    /* BOOKE e500 family	*/
-#define CONFIG_MPC85xx		1	    /* MPC8540/MPC8560		*/
-#define CONFIG_MPC85xx_REV1	1	    /* MPC85xx Rev 1 Chip	*/
-#define CONFIG_MPC8540		1	    /* MPC8540 specific		*/
-#define CONFIG_MPC8540ADS	1	    /* MPC8540ADS board specific*/
-
-#undef	CONFIG_PCI			    /* pci ethernet support	*/
-#define CONFIG_TSEC_ENET		    /* tsec ethernet support  */
+#define CONFIG_BOOKE		1	/* BOOKE */
+#define CONFIG_E500		1	/* BOOKE e500 family */
+#define CONFIG_MPC85xx		1	/* MPC8540/MPC8560 */
+#define CONFIG_MPC8540		1	/* MPC8540 specific */
+#define CONFIG_MPC8540ADS	1	/* MPC8540ADS board specific */
+
+#define CONFIG_PCI
+#define CONFIG_TSEC_ENET 		/* tsec ethernet support */
 #define CONFIG_ENV_OVERWRITE
-#define CONFIG_SPD_EEPROM		    /* Use SPD EEPROM for DDR setup */
-#undef	CONFIG_DDR_ECC			    /* only for ECC DDR module */
+#define CONFIG_SPD_EEPROM		/* Use SPD EEPROM for DDR setup*/
+#define CONFIG_DDR_ECC			/* only for ECC DDR module */
+#define CONFIG_DDR_DLL			/* possible DLL fix needed */
+#define CONFIG_DDR_2T_TIMING		/* Sets the 2T timing bit */
 
-#if defined(CONFIG_MPC85xx_REV1)
-#define CONFIG_DDR_DLL			    /* possible DLL fix needed */
-#endif
-
-/* Using Localbus SDRAM to emulate flash before we can program the flash,
- * normally you only need a flash-boot image(u-boot.bin),if unsure undef this.
+/*
+ * Use Localbus SDRAM to emulate flash before we can program the flash.
+ * Normally you need a flash-boot image(u-boot.bin).
+ * If unsure #undef this.
  */
 #undef CONFIG_RAM_AS_FLASH
 
-#if !defined(CONFIG_PCI)		    /* some PCI card is 33Mhz only */
-#define CONFIG_SYS_CLK_FREQ	66000000    /* sysclk for MPC85xx	*/
-#else
-#define CONFIG_SYS_CLK_FREQ	33000000    /* most pci cards are 33Mhz */
-#endif
+/*
+ * sysclk for MPC85xx
+ *
+ * Two valid values are:
+ *    33000000
+ *    66000000
+ *
+ * Most PCI cards are still 33Mhz, so in the presence of PCI, 33MHz
+ * is likely the desired value here.  The board, however, can run and
+ * defaults to 66Mhz.  In any event, this value must match the settings
+ * of SW15[1] and SW17[8], and likely SW6[0:1], the SYSCLK as well.
+ *
+ *	SW17[8] ------+    SW6
+ *	SW15[1] ----+ |   [0:1]
+ *		    V V    V V
+ *	33MHz	    1 1    1 0
+ *	66MHz	    0 0    0 1
+ */
+
+#define CONFIG_SYS_CLK_FREQ	66000000
 
-#if !defined(CONFIG_SPD_EEPROM)		    /* manually set up DDR parameters */
-#define CONFIG_DDR_SETTING
+
+#if !defined(CONFIG_SPD_EEPROM)
+#define CONFIG_DDR_SETTING	/* manually set up DDR parameters */
 #endif
 
-/* below can be toggled for performance analysis. otherwise use default */
-#define CONFIG_L2_CACHE			    /* toggle L2 cache	*/
-#undef	CONFIG_BTB			    /* toggle branch predition	*/
-#undef	CONFIG_ADDR_STREAMING		    /* toggle addr streaming	*/
+/*
+ * These can be toggled for performance analysis, otherwise use default.
+ */
+#define CONFIG_L2_CACHE			/* toggle L2 cache */
+#define CONFIG_BTB			/* toggle branch predition */
+#define CONFIG_ADDR_STREAMING		/* toggle addr streaming */
 
-#define CONFIG_BOARD_EARLY_INIT_F 1	    /* Call board_early_init_f	*/
+#define CONFIG_BOARD_EARLY_INIT_F	1	/* Call board_pre_init */
 
-#undef	CFG_DRAM_TEST			    /* memory test, takes time	*/
-#define CFG_MEMTEST_START	0x00200000	/* memtest works on	*/
+#undef	CFG_DRAM_TEST			/* memory test, takes time */
+#define CFG_MEMTEST_START	0x00200000	/* memtest region */
 #define CFG_MEMTEST_END		0x00400000
 
-#if defined(CONFIG_PCI) && defined(CONFIG_TSEC_ENET)
-#error "You can only use either PCI Ethernet Card or TSEC Ethernet, not both."
-#endif
 
 /*
  * Base addresses -- Note these are effective addresses where the
  * actual resources get mapped (not physical addresses)
  */
-#define CFG_CCSRBAR_DEFAULT	0xff700000	/* CCSRBAR Default	*/
-#define CFG_CCSRBAR		0xfdf00000	/* relocated CCSRBAR	*/
-#define CFG_IMMR		CFG_CCSRBAR	/* PQII uses CFG_IMMR	*/
+#define CFG_CCSRBAR_DEFAULT 	0xff700000	/* CCSRBAR Default */
+#define CFG_CCSRBAR		0xe0000000	/* relocated CCSRBAR */
+#define CFG_IMMR		CFG_CCSRBAR	/* PQII uses CFG_IMMR */
 
-#define CFG_DDR_SDRAM_BASE	0x00000000	/* DDR is system memory	 */
+#define CFG_DDR_SDRAM_BASE	0x00000000	/* DDR is system memory*/
 #define CFG_SDRAM_BASE		CFG_DDR_SDRAM_BASE
-#define CFG_SDRAM_SIZE		128		/* DDR is now 128MB	*/
+#define CFG_SDRAM_SIZE		128             /* DDR is 128MB */
 
+/*
+ * SDRAM on the Local Bus
+ */
 #if defined(CONFIG_RAM_AS_FLASH)
 #define CFG_LBC_SDRAM_BASE	0xfc000000	/* Localbus SDRAM */
 #else
-#define CFG_LBC_SDRAM_BASE	0xf8000000	/* Localbus SDRAM */
+#define CFG_LBC_SDRAM_BASE	0xf0000000	/* Localbus SDRAM */
 #endif
-#define CFG_LBC_SDRAM_SIZE	64		/* LBC SDRAM is 64MB	*/
+#define CFG_LBC_SDRAM_SIZE	64		/* LBC SDRAM is 64MB */
 
 #if defined(CONFIG_RAM_AS_FLASH)
-#define CFG_FLASH_BASE		0xf8000000	/* start of FLASH  16M	*/
+#define CFG_FLASH_BASE		0xf8000000	/* start of FLASH 16M */
 #define CFG_BR0_PRELIM		0xf8001801	/* port size 32bit */
 #else /* Boot from real Flash */
-#define CFG_FLASH_BASE		0xff000000	/* start of FLASH 16M	 */
-#define CFG_BR0_PRELIM		0xff001801	/* port size 32bit	*/
+#define CFG_FLASH_BASE		0xff000000	/* start of FLASH 16M */
+#define CFG_BR0_PRELIM		0xff001801	/* port size 32bit */
 #endif
 
-#define CFG_OR0_PRELIM		0xff006ff7	/* 16MB Flash		*/
-#define CFG_MAX_FLASH_BANKS	1		/* number of banks	*/
-#define CFG_MAX_FLASH_SECT	64		/* sectors per device	*/
+#define CFG_OR0_PRELIM		0xff006ff7	/* 16MB Flash */
+#define CFG_MAX_FLASH_BANKS	1		/* number of banks */
+#define CFG_MAX_FLASH_SECT	64		/* sectors per device */
 #undef	CFG_FLASH_CHECKSUM
-#define CFG_FLASH_ERASE_TOUT	60000	/* Timeout for Flash Erase (in ms)*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)*/
+#define CFG_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
+#define CFG_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
+
+#define CFG_MONITOR_BASE    	TEXT_BASE	/* start of monitor */
 
-#define CFG_MONITOR_BASE	TEXT_BASE	/* start of monitor */
 
 #if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
 #define CFG_RAMBOOT
 #else
-#undef	CFG_RAMBOOT
+#undef  CFG_RAMBOOT
 #endif
 
 #define SPD_EEPROM_ADDRESS	0x51		/* DDR DIMM */
 
+#undef CONFIG_CLOCKS_IN_MHZ
+
 #if defined(CONFIG_DDR_SETTING)
-#define CFG_DDR_CS0_BNDS	0x00000007	/* 0-128MB		*/
+#define CFG_DDR_CS0_BNDS	0x00000007	/* 0-128MB */
 #define CFG_DDR_CS0_CONFIG	0x80000002
 #define CFG_DDR_TIMING_1	0x37344321
-#define CFG_DDR_TIMING_2	0x00000800	/* P9-45,may need tuning*/
-#define CFG_DDR_CONTROL		0xc2000000	/* unbuffered,no DYN_PWR*/
-#define CFG_DDR_MODE		0x00000062	/* DLL,normal,seq,4/2.5 */
-#define CFG_DDR_INTERVAL	0x05200100	/* autocharge,no open page*/
+#define CFG_DDR_TIMING_2	0x00000800  /* P9-45,may need tuning */
+#define CFG_DDR_CONTROL		0xc2000000  /* unbuffered,no DYN_PWR */
+#define CFG_DDR_MODE		0x00000062  /* DLL,normal,seq,4/2.5 */
+#define CFG_DDR_INTERVAL	0x05200100  /* autocharge,no open page */
 #endif
 
-#undef CONFIG_CLOCKS_IN_MHZ
 
-/* local bus definitions */
-#define CFG_BR2_PRELIM		0xf8001861	/* 64MB localbus SDRAM	*/
+/*
+ * Local Bus Definitions
+ */
+
+/*
+ * Base Register 2 and Option Register 2 configure SDRAM.
+ * The SDRAM base address, CFG_LBC_SDRAM_BASE, is 0xf0000000.
+ *
+ * For BR2, need:
+ *    Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0
+ *    port-size = 32-bits = BR2[19:20] = 11
+ *    no parity checking = BR2[21:22] = 00
+ *    SDRAM for MSEL = BR2[24:26] = 011
+ *    Valid = BR[31] = 1
+ *
+ * 0    4    8    12   16   20   24   28
+ * 1111 0000 0000 0000 0001 1000 0110 0001 = f0001861
+ *
+ * FIXME: CFG_LBC_SDRAM_BASE should be masked and OR'ed into
+ * FIXME: the top 17 bits of BR2.
+ */
+
+#define CFG_BR2_PRELIM		0xf0001861
+
+/*
+ * The SDRAM size in MB, CFG_LBC_SDRAM_SIZE, is 64.
+ *
+ * For OR2, need:
+ *    64MB mask for AM, OR2[0:7] = 1111 1100
+ *		   XAM, OR2[17:18] = 11
+ *    9 columns OR2[19-21] = 010
+ *    13 rows   OR2[23-25] = 100
+ *    EAD set for extra time OR[31] = 1
+ *
+ * 0    4    8    12   16   20   24   28
+ * 1111 1100 0000 0000 0110 1001 0000 0001 = fc006901
+ */
+
 #define CFG_OR2_PRELIM		0xfc006901
-#define CFG_LBC_LCRR		0x00030004	/* local bus freq divider*/
-#define CFG_LBC_LBCR		0x00000000
-#define CFG_LBC_LSRT		0x20000000
-#define CFG_LBC_MRTPR		0x20000000
-#define CFG_LBC_LSDMR_1		0x2861b723
-#define CFG_LBC_LSDMR_2		0x0861b723
-#define CFG_LBC_LSDMR_3		0x0861b723
-#define CFG_LBC_LSDMR_4		0x1861b723
-#define CFG_LBC_LSDMR_5		0x4061b723
+
+#define CFG_LBC_LCRR		0x00030004    /* LB clock ratio reg */
+#define CFG_LBC_LBCR		0x00000000    /* LB config reg */
+#define CFG_LBC_LSRT		0x20000000    /* LB sdram refresh timer */
+#define CFG_LBC_MRTPR		0x20000000    /* LB refresh timer prescal*/
+
+/*
+ * LSDMR masks
+ */
+#define CFG_LBC_LSDMR_RFEN	(1 << (31 -  1))
+#define CFG_LBC_LSDMR_BSMA1516	(3 << (31 - 10))
+#define CFG_LBC_LSDMR_BSMA1617	(4 << (31 - 10))
+#define CFG_LBC_LSDMR_RFCR5	(3 << (31 - 16))
+#define CFG_LBC_LSDMR_RFCR16	(7 << (31 - 16))
+#define CFG_LBC_LSDMR_PRETOACT3	(3 << (31 - 19))
+#define CFG_LBC_LSDMR_PRETOACT7	(7 << (31 - 19))
+#define CFG_LBC_LSDMR_ACTTORW3	(3 << (31 - 22))
+#define CFG_LBC_LSDMR_ACTTORW7	(7 << (31 - 22))
+#define CFG_LBC_LSDMR_ACTTORW6	(6 << (31 - 22))
+#define CFG_LBC_LSDMR_BL8	(1 << (31 - 23))
+#define CFG_LBC_LSDMR_WRC2	(2 << (31 - 27))
+#define CFG_LBC_LSDMR_WRC4	(0 << (31 - 27))
+#define CFG_LBC_LSDMR_BUFCMD	(1 << (31 - 29))
+#define CFG_LBC_LSDMR_CL3	(3 << (31 - 31))
+
+#define CFG_LBC_LSDMR_OP_NORMAL	(0 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_ARFRSH	(1 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_SRFRSH	(2 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_MRW	(3 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_PRECH	(4 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_PCHALL	(5 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_ACTBNK	(6 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_RWINV	(7 << (31 - 4))
+
+#define CFG_LBC_LSDMR_COMMON	( CFG_LBC_LSDMR_BSMA1516	\
+				| CFG_LBC_LSDMR_RFCR5		\
+				| CFG_LBC_LSDMR_PRETOACT3	\
+				| CFG_LBC_LSDMR_ACTTORW3	\
+				| CFG_LBC_LSDMR_BL8		\
+				| CFG_LBC_LSDMR_WRC2		\
+				| CFG_LBC_LSDMR_CL3		\
+				| CFG_LBC_LSDMR_RFEN		\
+				)
+
+/*
+ * SDRAM Controller configuration sequence.
+ */
+#define CFG_LBC_LSDMR_1		( CFG_LBC_LSDMR_COMMON \
+				| CFG_LBC_LSDMR_OP_PCHALL)  /*0x2861b723*/
+#define CFG_LBC_LSDMR_2		( CFG_LBC_LSDMR_COMMON \
+				| CFG_LBC_LSDMR_OP_ARFRSH)  /*0x0861b723*/
+#define CFG_LBC_LSDMR_3		( CFG_LBC_LSDMR_COMMON \
+				| CFG_LBC_LSDMR_OP_ARFRSH)  /*0x0861b723*/
+#define CFG_LBC_LSDMR_4		( CFG_LBC_LSDMR_COMMON \
+				| CFG_LBC_LSDMR_OP_MRW)     /*0x1861b723*/
+#define CFG_LBC_LSDMR_5		( CFG_LBC_LSDMR_COMMON \
+				| CFG_LBC_LSDMR_OP_NORMAL)  /*0x4061b723*/
+
 
 #if defined(CONFIG_RAM_AS_FLASH)
-#define CFG_BR4_PRELIM		0xf8000801	/* 32KB, 8-bit wide for ADS config reg */
+#define CFG_BR4_PRELIM          0xf8000801      /* 32KB, 8-bit wide for ADS config reg */
 #else
-#define CFG_BR4_PRELIM		0xfc000801	/* 32KB, 8-bit wide for ADS config reg */
+#define CFG_BR4_PRELIM          0xf8000801      /* 32KB, 8-bit wide for ADS config reg */
 #endif
 #define CFG_OR4_PRELIM		0xffffe1f1
 #define CFG_BCSR		(CFG_BR4_PRELIM & 0xffff8000)
 
 #define CONFIG_L1_INIT_RAM
-#define CFG_INIT_RAM_LOCK	1
-#define CFG_INIT_RAM_ADDR	0x40000000	/* Initial RAM address	*/
-#define CFG_INIT_RAM_END	0x4000		/* End of used area in RAM */
+#define CFG_INIT_RAM_LOCK 	1
+#define CFG_INIT_RAM_ADDR	0x40000000	/* Initial RAM address */
+#define CFG_INIT_RAM_END    	0x4000	    	/* End of used area in RAM */
 
-#define CFG_GBL_DATA_SIZE	128		/* num bytes initial data */
+#define CFG_GBL_DATA_SIZE  	128		/* num bytes initial data */
 #define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
 #define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
 
-#define CFG_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Mon */
-#define CFG_MALLOC_LEN		(128 * 1024)	/* Reserved for malloc */
+#define CFG_MONITOR_LEN	    	(256 * 1024)    /* Reserve 256 kB for Mon */
+#define CFG_MALLOC_LEN	    	(128 * 1024)    /* Reserved for malloc */
 
 /* Serial Port */
 #define CONFIG_CONS_INDEX     1
 #undef	CONFIG_SERIAL_SOFTWARE_FIFO
 #define CFG_NS16550
 #define CFG_NS16550_SERIAL
-#define CFG_NS16550_REG_SIZE	1
+#define CFG_NS16550_REG_SIZE    1
 #define CFG_NS16550_CLK		get_bus_freq(0)
-#define CONFIG_BAUDRATE		115200
 
 #define CFG_BAUDRATE_TABLE  \
 	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
 
-#define CFG_NS16550_COM1	(CFG_CCSRBAR+0x4500)
-#define CFG_NS16550_COM2	(CFG_CCSRBAR+0x4600)
+#define CFG_NS16550_COM1        (CFG_CCSRBAR+0x4500)
+#define CFG_NS16550_COM2        (CFG_CCSRBAR+0x4600)
 
 /* Use the HUSH parser */
 #define CFG_HUSH_PARSER
-#ifdef	CFG_HUSH_PARSER
+#ifdef  CFG_HUSH_PARSER
 #define CFG_PROMPT_HUSH_PS2 "> "
 #endif
 
 /* I2C */
-#define	 CONFIG_HARD_I2C		/* I2C with hardware support*/
-#undef	CONFIG_SOFT_I2C			/* I2C bit-banged		*/
-#define CFG_I2C_SPEED		400000	/* I2C speed and slave address	*/
+#define  CONFIG_HARD_I2C		/* I2C with hardware support*/
+#undef	CONFIG_SOFT_I2C			/* I2C bit-banged */
+#define CFG_I2C_SPEED		400000	/* I2C speed and slave address */
 #define CFG_I2C_SLAVE		0x7F
-#define CFG_I2C_NOPROBES	{0x69}	/* Don't probe these addrs */
+#define CFG_I2C_NOPROBES        {0x69}	/* Don't probe these addrs */
+
+/* RapidIO MMU */
+#define CFG_RIO_MEM_BASE	0xc0000000	/* base address */
+#define CFG_RIO_MEM_PHYS	CFG_RIO_MEM_BASE
+#define CFG_RIO_MEM_SIZE	0x20000000	/* 128M */
+
+/*
+ * General PCI
+ * Addresses are mapped 1-1.
+ */
+#define CFG_PCI1_MEM_BASE	0x80000000
+#define CFG_PCI1_MEM_PHYS	CFG_PCI1_MEM_BASE
+#define CFG_PCI1_MEM_SIZE	0x20000000	/* 512M */
+#define CFG_PCI1_IO_BASE	0xe2000000
+#define CFG_PCI1_IO_PHYS	CFG_PCI1_IO_BASE
+#define CFG_PCI1_IO_SIZE	0x1000000	/* 16M */
 
-/* General PCI */
-#define CFG_PCI_MEM_BASE	0xe0000000
-#define CFG_PCI_MEM_PHYS	0xe0000000
-#define CFG_PCI_MEM_SIZE	0x10000000
 #if defined(CONFIG_PCI)
+
 #define CONFIG_NET_MULTI
+#define CONFIG_PCI_PNP		       	/* do pci plug-and-play */
+
 #undef CONFIG_EEPRO100
-#define CONFIG_TULIP
-#define CONFIG_PCI_PNP			/* do pci plug-and-play */
-  #if !defined(CONFIG_PCI_PNP)
-  #define PCI_ENET0_IOADDR	0xe0000000
-  #define PCI_ENET0_MEMADDR	0xe0000000
-  #define PCI_IDSEL_NUMBER	0x0c	/*slot0->3(IDSEL)=12->15*/
-  #endif
-#define CONFIG_PCI_SCAN_SHOW	1	/* show pci devices on startup	*/
-#define CFG_PCI_SUBSYS_VENDORID 0x1057	/* Motorola */
-#if defined(CONFIG_MPC85xx_REV1)	/* Errata PCI 8 */
-  #define CFG_PCI_SUBSYS_DEVICEID 0x0003
-#else
-  #define CFG_PCI_SUBSYS_DEVICEID 0x0008
+#undef CONFIG_TULIP
+
+#if !defined(CONFIG_PCI_PNP)
+    #define PCI_ENET0_IOADDR	0xe0000000
+    #define PCI_ENET0_MEMADDR	0xe0000000
+    #define PCI_IDSEL_NUMBER	0x0c 	/* slot0->3(IDSEL)=12->15 */
 #endif
-#elif defined(CONFIG_TSEC_ENET)
-#define CONFIG_NET_MULTI	1
-#define CONFIG_PHY_M88E1011	 1	 /* GigaBit Ether PHY	 */
-#define CONFIG_MII		1	/* MII PHY management	*/
-#define CONFIG_PHY_ADDR		8	/* PHY address	*/
+
+#undef CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
+#define CFG_PCI_SUBSYS_VENDORID 0x1057  /* Motorola */
+
+#endif	/* CONFIG_PCI */
+
+
+#if defined(CONFIG_TSEC_ENET)
+
+#ifndef CONFIG_NET_MULTI
+#define CONFIG_NET_MULTI 	1
 #endif
 
-/* Environment */
+#define CONFIG_MII		1	/* MII PHY management */
+#define CONFIG_MPC85XX_TSEC1	1
+#define CONFIG_MPC85XX_TSEC2	1
+#define CONFIG_MPC85XX_FEC	1
+#define TSEC1_PHY_ADDR		0
+#define TSEC2_PHY_ADDR		1
+#define FEC_PHY_ADDR		3
+#define TSEC1_PHYIDX		0
+#define TSEC2_PHYIDX		0
+#define FEC_PHYIDX		0
+#define CONFIG_ETHPRIME		"MOTO ENET0"
+
+#endif	/* CONFIG_TSEC_ENET */
+
+
+/*
+ * Environment
+ */
 #ifndef CFG_RAMBOOT
   #if defined(CONFIG_RAM_AS_FLASH)
   #define CFG_ENV_IS_NOWHERE
@@ -232,72 +370,83 @@
   #else
   #define CFG_ENV_IS_IN_FLASH	1
   #define CFG_ENV_ADDR		(CFG_MONITOR_BASE + 0x40000)
-  #define CFG_ENV_SECT_SIZE	0x40000 /* 256K(one sector) for env */
+  #define CFG_ENV_SECT_SIZE	0x40000	/* 256K(one sector) for env */
   #endif
   #define CFG_ENV_SIZE		0x2000
 #else
-#define CFG_NO_FLASH		1	/* Flash is not usable now	*/
-#define CFG_ENV_IS_NOWHERE	1	/* Store ENV in memory only	*/
+#define CFG_NO_FLASH		1	/* Flash is not usable now */
+#define CFG_ENV_IS_NOWHERE	1	/* Store ENV in memory only */
 #define CFG_ENV_ADDR		(CFG_MONITOR_BASE - 0x1000)
 #define CFG_ENV_SIZE		0x2000
 #endif
 
-#define CONFIG_BOOTARGS "root=/dev/nfs rw nfsroot=163.12.64.52:/localhome/r6aads/linuxppc/target ip=10.82.0.105:163.12.64.52:10.82.1.254:255.255.254.0:mpc8540ads-003:eth0:off console=ttyS0,115200"
-/*#define CONFIG_BOOTARGS	"root=/dev/ram rw console=ttyS0,115200"*/
-#define CONFIG_BOOTCOMMAND	"bootm 0xff300000 0xff700000"
-#define CONFIG_BOOTDELAY	3	/* -1 disable autoboot */
-
-#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
+#define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
+#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
 
 #if defined(CFG_RAMBOOT) || defined(CONFIG_RAM_AS_FLASH)
   #if defined(CONFIG_PCI)
-  #define  CONFIG_COMMANDS	((CONFIG_CMD_DFL | CFG_CMD_PING | CFG_CMD_PCI | CFG_CMD_I2C ) & \
-				 ~(CFG_CMD_ENV | CFG_CMD_LOADS ))
+    #define  CONFIG_COMMANDS	((CONFIG_CMD_DFL	\
+				 | CFG_CMD_PING		\
+				 | CFG_CMD_PCI		\
+				 | CFG_CMD_I2C)		\
+				&			\
+				 ~(CFG_CMD_ENV		\
+				  | CFG_CMD_LOADS))
   #else
-  #define  CONFIG_COMMANDS	((CONFIG_CMD_DFL | CFG_CMD_PING | CFG_CMD_I2C ) & \
-				 ~(CFG_CMD_ENV | \
-				  CFG_CMD_LOADS ))
+    #define  CONFIG_COMMANDS	((CONFIG_CMD_DFL	\
+				 | CFG_CMD_PING		\
+				 | CFG_CMD_I2C)		\
+				&			\
+				 ~(CFG_CMD_ENV		\
+				  | CFG_CMD_LOADS))
   #endif
 #else
   #if defined(CONFIG_PCI)
-  #define  CONFIG_COMMANDS	(CONFIG_CMD_DFL | CFG_CMD_PCI | CFG_CMD_PING | CFG_CMD_I2C )
+    #define  CONFIG_COMMANDS	(CONFIG_CMD_DFL		\
+				| CFG_CMD_PCI		\
+				| CFG_CMD_PING		\
+				| CFG_CMD_I2C)
   #else
-  #define  CONFIG_COMMANDS	(CONFIG_CMD_DFL | CFG_CMD_PING | CFG_CMD_I2C )
+    #define  CONFIG_COMMANDS	(CONFIG_CMD_DFL		\
+				| CFG_CMD_PING		\
+				| CFG_CMD_I2C)
   #endif
 #endif
+
 #include <cmd_confdefs.h>
 
-#undef CONFIG_WATCHDOG			/* watchdog disabled		*/
+#undef CONFIG_WATCHDOG			/* watchdog disabled */
 
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory		*/
-#define CFG_PROMPT	"MPC8540ADS=> " /* Monitor Command Prompt	*/
+#define CFG_LONGHELP			/* undef to save memory	*/
+#define CFG_LOAD_ADDR	0x2000000	/* default load address */
+#define CFG_PROMPT	"=> "		/* Monitor Command Prompt */
+
 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+    #define CFG_CBSIZE	1024		/* Console I/O Buffer Size */
 #else
-#define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+    #define CFG_CBSIZE	256		/* Console I/O Buffer Size */
 #endif
+
 #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
-#define CFG_LOAD_ADDR	0x1000000	/* default load address */
-#define CFG_HZ		1000		/* decrementer freq: 1 ms ticks */
+#define CFG_MAXARGS	16		/* max number of command args */
+#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size */
+#define CFG_HZ		1000		/* decrementer freq: 1ms ticks */
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux */
+#define CFG_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/
 
 /* Cache Configuration */
-#define CFG_DCACHE_SIZE 32768
+#define CFG_DCACHE_SIZE		32768
 #define CFG_CACHELINE_SIZE	32
 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
+#define CFG_CACHELINE_SHIFT	5	/*log base 2 of the above value*/
 #endif
 
 /*
@@ -306,26 +455,62 @@
  * Boot Flags
  */
 #define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM	0x02		/* Software reboot		*/
+#define BOOTFLAG_WARM	0x02		/* Software reboot */
 
 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
-/* NOTE: change below for your network setting!!! */
+/*****************************/
+/* Environment Configuration */
+/*****************************/
+
+/* The mac addresses for all ethernet interface */
 #if defined(CONFIG_TSEC_ENET)
-#define CONFIG_ETHADDR	00:01:af:07:9b:8a
-#define CONFIG_ETH1ADDR	 00:01:af:07:9b:8b
-#define CONFIG_ETH2ADDR	 00:01:af:07:9b:8c
+#define CONFIG_ETHADDR   00:E0:0C:00:00:FD
+#define CONFIG_ETH1ADDR  00:E0:0C:00:01:FD
+#define CONFIG_ETH2ADDR  00:E0:0C:00:02:FD
 #endif
 
-#define CONFIG_SERVERIP		163.12.64.52
-#define CONFIG_IPADDR		10.82.0.105
-#define CONFIG_GATEWAYIP	10.82.1.254
-#define CONFIG_NETMASK		255.255.254.0
-#define CONFIG_HOSTNAME		MPC8560ADS_PILOT_003
-#define CONFIG_ROOTPATH		/home/r6aads/mpclinux/eldk-2.0.2/ppc_82xx
-#define CONFIG_BOOTFILE		pImage
+#define CONFIG_IPADDR    192.168.1.253
+
+#define CONFIG_HOSTNAME		unknown
+#define CONFIG_ROOTPATH		/nfsroot
+#define CONFIG_BOOTFILE		your.uImage
+
+#define CONFIG_SERVERIP  192.168.1.1
+#define CONFIG_GATEWAYIP 192.168.1.1
+#define CONFIG_NETMASK   255.255.255.0
+
+#define CONFIG_LOADADDR  200000	/* default location for tftp and bootm */
+
+#define CONFIG_BOOTDELAY 10	/* -1 disables auto-boot */
+#undef  CONFIG_BOOTARGS		/* the boot command will set bootargs */
+
+#define CONFIG_BAUDRATE	115200
+
+#define	CONFIG_EXTRA_ENV_SETTINGS					\
+   "netdev=eth0\0"                                                      \
+   "consoledev=ttyS0\0"                                                 \
+   "ramdiskaddr=400000\0"						\
+   "ramdiskfile=your.ramdisk.u-boot\0"
+
+#define CONFIG_NFSBOOTCOMMAND						\
+   "setenv bootargs root=/dev/nfs rw "                                  \
+      "nfsroot=$serverip:$rootpath "                                    \
+      "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
+      "console=$consoledev,$baudrate $othbootargs;"                     \
+   "tftp $loadaddr $bootfile;"                                          \
+   "bootm $loadaddr"
+
+#define CONFIG_RAMBOOTCOMMAND \
+   "setenv bootargs root=/dev/ram rw "                                  \
+      "console=$consoledev,$baudrate $othbootargs;"                     \
+   "tftp $ramdiskaddr $ramdiskfile;"                                    \
+   "tftp $loadaddr $bootfile;"                                          \
+   "bootm $loadaddr $ramdiskaddr"
+
+#define CONFIG_BOOTCOMMAND  CONFIG_NFSBOOTCOMMAND
 
 #endif	/* __CONFIG_H */
diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h
index 44b128f..f681b50 100644
--- a/include/configs/MPC8560ADS.h
+++ b/include/configs/MPC8560ADS.h
@@ -1,4 +1,5 @@
 /*
+ * Copyright 2004 Freescale Semiconductor.
  * (C) Copyright 2002,2003 Motorola,Inc.
  * Xianghua Xiao <X.Xiao@motorola.com>
  *
@@ -21,226 +22,363 @@
  * MA 02111-1307 USA
  */
 
-/* mpc8560ads board configuration file */
-/* please refer to doc/README.mpc85xx for more info */
-/* make sure you change the MAC address and other network params first,
- * search for CONFIG_ETHADDR,CONFIG_SERVERIP,etc in this file
+/*
+ * mpc8560ads board configuration file
+ *
+ * Please refer to doc/README.mpc85xx for more info.
+ *
+ * Make sure you change the MAC address and other network params first,
+ * search for CONFIG_ETHADDR, CONFIG_SERVERIP, etc in this file.
  */
 
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
 /* High Level Configuration Options */
-#define CONFIG_BOOKE		1	/* BOOKE			*/
-#define CONFIG_E500		1	/* BOOKE e500 family		*/
-#define CONFIG_MPC85xx		1	/* MPC8540/MPC8560		*/
-#define CONFIG_MPC85xx_REV1	1	/* MPC85xx Rev 1.0 chip		*/
-#define CONFIG_MPC8560		1	/* MPC8560 specific		*/
-#define CONFIG_MPC8560ADS	1	/* MPC8560ADS board specific	*/
-
-#undef	CONFIG_PCI			/* pci ethernet support		*/
-#define CONFIG_TSEC_ENET		/* tsec ethernet support	*/
-#undef	CONFIG_ETHER_ON_FCC		/* cpm FCC ethernet support	*/
+#define CONFIG_BOOKE		1	/* BOOKE */
+#define CONFIG_E500		1	/* BOOKE e500 family */
+#define CONFIG_MPC85xx		1	/* MPC8540/MPC8560 */
+#define CONFIG_MPC8560		1	/* MPC8560 specific */
+#define CONFIG_MPC8560ADS	1	/* MPC8560ADS board specific */
+
+#define CONFIG_PCI
+#define CONFIG_TSEC_ENET 		/* tsec ethernet support */
+#undef  CONFIG_ETHER_ON_FCC             /* cpm FCC ethernet support */
 #define CONFIG_ENV_OVERWRITE
-#define CONFIG_SPD_EEPROM		/* Use SPD EEPROM for DDR setup */
-#undef	CONFIG_DDR_ECC			/* only for ECC DDR module	*/
+#define CONFIG_SPD_EEPROM               /* Use SPD EEPROM for DDR setup*/
+#define CONFIG_DDR_ECC			/* only for ECC DDR module */
+#define CONFIG_DDR_DLL                  /* possible DLL fix needed */
+#define CONFIG_DDR_2T_TIMING            /* Sets the 2T timing bit */
 
-#if defined(CONFIG_MPC85xx_REV1)
-#define CONFIG_DDR_DLL			/* possible DLL fix needed	*/
-#endif
-
-/* Using Localbus SDRAM to emulate flash before we can program the flash,
- * normally you need a flash-boot image(u-boot.bin), if so undef this.
+/*
+ * Use Localbus SDRAM to emulate flash before we can program the flash.
+ * Normally you need a flash-boot image(u-boot.bin).
+ * If unsure #undef this.
  */
 #undef CONFIG_RAM_AS_FLASH
 
-#if !defined(CONFIG_PCI)		/* some PCI card is 33Mhz only	*/
-#define CONFIG_SYS_CLK_FREQ	66000000/* sysclk for MPC85xx		*/
-#else
-#define CONFIG_SYS_CLK_FREQ	33000000/* most pci cards are 33Mhz	*/
-#endif
+/*
+ * sysclk for MPC85xx
+ *
+ * Two valid values are:
+ *    33000000
+ *    66000000
+ *
+ * Most PCI cards are still 33Mhz, so in the presence of PCI, 33MHz
+ * is likely the desired value here.  The board, however, can run and
+ * defaults to 66Mhz.  In any event, this value must match the settings
+ * of SW15[1] and SW17[8], and likely SW6[0:1], the SYSCLK as well.
+ *
+ *	SW17[8] ------+    SW6
+ *	SW15[1] ----+ |   [0:1]
+ *		    V V    V V
+ *	33MHz	    1 1    1 0
+ *	66MHz	    0 0    0 1
+ */
+
+#define CONFIG_SYS_CLK_FREQ	66000000
 
-#if !defined(CONFIG_SPD_EEPROM)		/* manually set up DDR parameters */
-#define CONFIG_DDR_SETTING
+
+#if !defined(CONFIG_SPD_EEPROM)
+#define CONFIG_DDR_SETTING	/* manually set up DDR parameters */
 #endif
 
-/* below can be toggled for performance analysis. otherwise use default */
-#define CONFIG_L2_CACHE			    /* toggle L2 cache		*/
-#undef	CONFIG_BTB			    /* toggle branch predition	*/
-#undef	CONFIG_ADDR_STREAMING		    /* toggle addr streaming	*/
+/*
+ * These can be toggled for performance analysis, otherwise use default.
+ */
+#define CONFIG_L2_CACHE			/* toggle L2 cache */
+#define CONFIG_BTB			/* toggle branch predition */
+#define CONFIG_ADDR_STREAMING		/* toggle addr streaming */
 
-#define CONFIG_BOARD_EARLY_INIT_F 1	    /* Call board_early_init_f	*/
+#define CONFIG_BOARD_EARLY_INIT_F	1	/* Call board_pre_init */
 
-#undef	CFG_DRAM_TEST			    /* memory test, takes time	*/
-#define CFG_MEMTEST_START	0x00200000  /* memtest region */
+#define CFG_INIT_DBCR DBCR_IDM		/* Enable Debug Exceptions */
+
+#undef  CFG_DRAM_TEST                  /* memory test, takes time */
+#define CFG_MEMTEST_START	0x00200000	/* memtest region */
 #define CFG_MEMTEST_END		0x00400000
 
-#if (defined(CONFIG_PCI) && defined(CONFIG_TSEC_ENET) || \
-     defined(CONFIG_PCI) && defined(CONFIG_ETHER_ON_FCC) || \
-     defined(CONFIG_TSEC_ENET) && defined(CONFIG_ETHER_ON_FCC))
-#error "You can only use ONE of PCI Ethernet Card or TSEC Ethernet or CPM FCC."
-#endif
 
 /*
  * Base addresses -- Note these are effective addresses where the
  * actual resources get mapped (not physical addresses)
  */
-#define CFG_CCSRBAR_DEFAULT	0xff700000	/* CCSRBAR Default	*/
-#define CFG_CCSRBAR		0xfdf00000	/* relocated CCSRBAR	*/
-#define CFG_IMMR		CFG_CCSRBAR	/* PQII uses CFG_IMMR	*/
+#define CFG_CCSRBAR_DEFAULT 	0xff700000	/* CCSRBAR Default */
+#define CFG_CCSRBAR             0xe0000000      /* relocated CCSRBAR */
+#define CFG_IMMR		CFG_CCSRBAR	/* PQII uses CFG_IMMR */
 
-#define CFG_DDR_SDRAM_BASE	0x00000000	/* DDR is system memory	 */
+#define CFG_DDR_SDRAM_BASE	0x00000000	/* DDR is system memory*/
 #define CFG_SDRAM_BASE		CFG_DDR_SDRAM_BASE
-#define CFG_SDRAM_SIZE		128		/* DDR is 128MB */
+#define CFG_SDRAM_SIZE		128		/* DDR is 128MB	*/
 
+/*
+ * SDRAM on the Local Bus
+ */
 #if defined(CONFIG_RAM_AS_FLASH)
 #define CFG_LBC_SDRAM_BASE	0xfc000000	/* Localbus SDRAM */
 #else
-#define CFG_LBC_SDRAM_BASE	0xf8000000	/* Localbus SDRAM */
+#define CFG_LBC_SDRAM_BASE	0xf0000000	/* Localbus SDRAM */
 #endif
-#define CFG_LBC_SDRAM_SIZE	64		/* LBC SDRAM is 64MB	*/
+#define CFG_LBC_SDRAM_SIZE	64		/* LBC SDRAM is 64MB */
 
 #if defined(CONFIG_RAM_AS_FLASH)
-#define CFG_FLASH_BASE	      0xf8000000      /* start of FLASH	 16M  */
-#define CFG_BR0_PRELIM	      0xf8001801      /* port size 32bit */
+#define CFG_FLASH_BASE		0xf8000000	/* start of FLASH 16M */
+#define CFG_BR0_PRELIM		0xf8001801	/* port size 32bit */
 #else /* Boot from real Flash */
-#define CFG_FLASH_BASE	      0xff000000      /* start of FLASH 16M    */
-#define CFG_BR0_PRELIM	      0xff001801      /* port size 32bit      */
+#define CFG_FLASH_BASE		0xff000000	/* start of FLASH 16M */
+#define CFG_BR0_PRELIM		0xff001801	/* port size 32bit */
 #endif
 
-#define CFG_OR0_PRELIM		0xff006ff7	/* 16MB Flash		*/
-#define CFG_MAX_FLASH_BANKS	1		/* number of banks	*/
-#define CFG_MAX_FLASH_SECT	64		/* sectors per device	*/
+#define CFG_OR0_PRELIM		0xff006ff7	/* 16MB Flash */
+#define CFG_MAX_FLASH_BANKS	1		/* number of banks */
+#define CFG_MAX_FLASH_SECT	64		/* sectors per device */
 #undef	CFG_FLASH_CHECKSUM
-#define CFG_FLASH_ERASE_TOUT	60000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+#define CFG_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
+#define CFG_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
+
+#define CFG_MONITOR_BASE    	TEXT_BASE	/* start of monitor */
 
-#define CFG_MONITOR_BASE	TEXT_BASE	/* start of monitor	*/
 
 #if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
 #define CFG_RAMBOOT
 #else
-#undef	CFG_RAMBOOT
+#undef  CFG_RAMBOOT
 #endif
 
-#define SPD_EEPROM_ADDRESS	0x51		/*  DDR DIMM */
+#define SPD_EEPROM_ADDRESS	0x51		/* DDR DIMM */
+
+#undef CONFIG_CLOCKS_IN_MHZ
 
 #if defined(CONFIG_DDR_SETTING)
 #define CFG_DDR_CS0_BNDS	0x00000007	/* 0-128MB */
 #define CFG_DDR_CS0_CONFIG	0x80000002
 #define CFG_DDR_TIMING_1	0x37344321
-#define CFG_DDR_TIMING_2	0x00000800	/* P9-45,may need tuning*/
-#define CFG_DDR_CONTROL		0xc2000000	/* unbuffered,no DYN_PWR*/
-#define CFG_DDR_MODE		0x00000062	/* DLL,normal,seq,4/2.5 */
-#define CFG_DDR_INTERVAL	0x05200100	/* autocharge,no open page*/
+#define CFG_DDR_TIMING_2	0x00000800  /* P9-45,may need tuning */
+#define CFG_DDR_CONTROL		0xc2000000  /* unbuffered,no DYN_PWR */
+#define CFG_DDR_MODE		0x00000062  /* DLL,normal,seq,4/2.5 */
+#define CFG_DDR_INTERVAL	0x05200100  /* autocharge,no open page */
 #endif
 
-#undef CONFIG_CLOCKS_IN_MHZ
 
-/* local bus definitions */
-#define CFG_BR2_PRELIM		0xf8001861	/* 64MB localbus SDRAM	*/
+/*
+ * Local Bus Definitions
+ */
+
+/*
+ * Base Register 2 and Option Register 2 configure SDRAM.
+ * The SDRAM base address, CFG_LBC_SDRAM_BASE, is 0xf0000000.
+ *
+ * For BR2, need:
+ *    Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0
+ *    port-size = 32-bits = BR2[19:20] = 11
+ *    no parity checking = BR2[21:22] = 00
+ *    SDRAM for MSEL = BR2[24:26] = 011
+ *    Valid = BR[31] = 1
+ *
+ * 0    4    8    12   16   20   24   28
+ * 1111 0000 0000 0000 0001 1000 0110 0001 = f0001861
+ *
+ * FIXME: CFG_LBC_SDRAM_BASE should be masked and OR'ed into
+ * FIXME: the top 17 bits of BR2.
+ */
+
+#define CFG_BR2_PRELIM		0xf0001861
+
+/*
+ * The SDRAM size in MB, CFG_LBC_SDRAM_SIZE, is 64.
+ *
+ * For OR2, need:
+ *    64MB mask for AM, OR2[0:7] = 1111 1100
+ *		   XAM, OR2[17:18] = 11
+ *    9 columns OR2[19-21] = 010
+ *    13 rows   OR2[23-25] = 100
+ *    EAD set for extra time OR[31] = 1
+ *
+ * 0    4    8    12   16   20   24   28
+ * 1111 1100 0000 0000 0110 1001 0000 0001 = fc006901
+ */
+
 #define CFG_OR2_PRELIM		0xfc006901
-#define CFG_LBC_LCRR		0x00030004	/* local bus freq	*/
-#define CFG_LBC_LBCR		0x00000000
-#define CFG_LBC_LSRT		0x20000000
-#define CFG_LBC_MRTPR		0x20000000
-#define CFG_LBC_LSDMR_1		0x2861b723
-#define CFG_LBC_LSDMR_2		0x0861b723
-#define CFG_LBC_LSDMR_3		0x0861b723
-#define CFG_LBC_LSDMR_4		0x1861b723
-#define CFG_LBC_LSDMR_5		0x4061b723
+
+#define CFG_LBC_LCRR		0x00030004    /* LB clock ratio reg */
+#define CFG_LBC_LBCR		0x00000000    /* LB config reg */
+#define CFG_LBC_LSRT		0x20000000    /* LB sdram refresh timer */
+#define CFG_LBC_MRTPR		0x20000000    /* LB refresh timer prescal*/
+
+/*
+ * LSDMR masks
+ */
+#define CFG_LBC_LSDMR_RFEN	(1 << (31 -  1))
+#define CFG_LBC_LSDMR_BSMA1516	(3 << (31 - 10))
+#define CFG_LBC_LSDMR_BSMA1617	(4 << (31 - 10))
+#define CFG_LBC_LSDMR_RFCR5	(3 << (31 - 16))
+#define CFG_LBC_LSDMR_RFCR16	(7 << (31 - 16))
+#define CFG_LBC_LSDMR_PRETOACT3	(3 << (31 - 19))
+#define CFG_LBC_LSDMR_PRETOACT7	(7 << (31 - 19))
+#define CFG_LBC_LSDMR_ACTTORW3	(3 << (31 - 22))
+#define CFG_LBC_LSDMR_ACTTORW7	(7 << (31 - 22))
+#define CFG_LBC_LSDMR_ACTTORW6	(6 << (31 - 22))
+#define CFG_LBC_LSDMR_BL8	(1 << (31 - 23))
+#define CFG_LBC_LSDMR_WRC2	(2 << (31 - 27))
+#define CFG_LBC_LSDMR_WRC4	(0 << (31 - 27))
+#define CFG_LBC_LSDMR_BUFCMD	(1 << (31 - 29))
+#define CFG_LBC_LSDMR_CL3	(3 << (31 - 31))
+
+#define CFG_LBC_LSDMR_OP_NORMAL	(0 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_ARFRSH	(1 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_SRFRSH	(2 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_MRW	(3 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_PRECH	(4 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_PCHALL	(5 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_ACTBNK	(6 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_RWINV	(7 << (31 - 4))
+
+#define CFG_LBC_LSDMR_COMMON	( CFG_LBC_LSDMR_BSMA1516	\
+				| CFG_LBC_LSDMR_RFCR5		\
+				| CFG_LBC_LSDMR_PRETOACT3	\
+				| CFG_LBC_LSDMR_ACTTORW3	\
+				| CFG_LBC_LSDMR_BL8		\
+				| CFG_LBC_LSDMR_WRC2		\
+				| CFG_LBC_LSDMR_CL3		\
+				| CFG_LBC_LSDMR_RFEN		\
+				)
+
+/*
+ * SDRAM Controller configuration sequence.
+ */
+#define CFG_LBC_LSDMR_1		( CFG_LBC_LSDMR_COMMON \
+				| CFG_LBC_LSDMR_OP_PCHALL)  /*0x2861b723*/
+#define CFG_LBC_LSDMR_2		( CFG_LBC_LSDMR_COMMON \
+				| CFG_LBC_LSDMR_OP_ARFRSH)  /*0x0861b723*/
+#define CFG_LBC_LSDMR_3		( CFG_LBC_LSDMR_COMMON \
+				| CFG_LBC_LSDMR_OP_ARFRSH)  /*0x0861b723*/
+#define CFG_LBC_LSDMR_4		( CFG_LBC_LSDMR_COMMON \
+				| CFG_LBC_LSDMR_OP_MRW)     /*0x1861b723*/
+#define CFG_LBC_LSDMR_5		( CFG_LBC_LSDMR_COMMON \
+				| CFG_LBC_LSDMR_OP_NORMAL)  /*0x4061b723*/
+
 
 #if defined(CONFIG_RAM_AS_FLASH)
-#define CFG_BR4_PRELIM		0xf8000801	/* 32KB, 8-bit wide for ADS config reg */
+#define CFG_BR4_PRELIM          0xf8000801      /* 32KB, 8-bit wide for ADS config reg */
 #else
-#define CFG_BR4_PRELIM		0xfc000801	/* 32KB, 8-bit wide for ADS config reg */
+#define CFG_BR4_PRELIM          0xf8000801      /* 32KB, 8-bit wide for ADS config reg */
 #endif
 #define CFG_OR4_PRELIM		0xffffe1f1
 #define CFG_BCSR		(CFG_BR4_PRELIM & 0xffff8000)
 
 #define CONFIG_L1_INIT_RAM
-#define CFG_INIT_RAM_LOCK	1
-#define CFG_INIT_RAM_ADDR	0x40000000	/* Initial RAM address	*/
-#define CFG_INIT_RAM_END	0x4000		/* End of used area in RAM */
+#define CFG_INIT_RAM_LOCK 	1
+#define CFG_INIT_RAM_ADDR	0x40000000	/* Initial RAM address */
+#define CFG_INIT_RAM_END    	0x4000	    	/* End of used area in RAM */
 
-#define CFG_GBL_DATA_SIZE	128		/* num bytes initial data */
+#define CFG_GBL_DATA_SIZE  	128		/* num bytes initial data */
 #define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
 #define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
 
-#define CFG_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Mon */
-#define CFG_MALLOC_LEN		(128 * 1024)	/* Reserved for malloc */
+#define CFG_MONITOR_LEN	    	(256 * 1024)    /* Reserve 256 kB for Mon */
+#define CFG_MALLOC_LEN	    	(128 * 1024)    /* Reserved for malloc */
 
 /* Serial Port */
-#define CONFIG_CONS_ON_SCC			/* define if console on SCC */
-#undef	CONFIG_CONS_NONE			/* define if console on something else */
-#define CONFIG_CONS_INDEX	1		/* which serial channel for console */
+#define CONFIG_CONS_ON_SCC	/* define if console on SCC */
+#undef  CONFIG_CONS_NONE	/* define if console on something else */
+#define CONFIG_CONS_INDEX       1  /* which serial channel for console */
 
-#define CONFIG_BAUDRATE		115200
+#define CONFIG_BAUDRATE	 	115200
 
 #define CFG_BAUDRATE_TABLE  \
 	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
 
 /* Use the HUSH parser */
 #define CFG_HUSH_PARSER
-#ifdef	CFG_HUSH_PARSER
+#ifdef  CFG_HUSH_PARSER
 #define CFG_PROMPT_HUSH_PS2 "> "
 #endif
 
 /* I2C */
-#define	 CONFIG_HARD_I2C		/* I2C with hardware support*/
+#define  CONFIG_HARD_I2C    		/* I2C with hardware support*/
 #undef	CONFIG_SOFT_I2C			/* I2C bit-banged */
-#define CFG_I2C_SPEED		400000	/* I2C speed and slave address	*/
+#define CFG_I2C_SPEED		400000	/* I2C speed and slave address */
 #define CFG_I2C_SLAVE		0x7F
-#define CFG_I2C_NOPROBES	{0x69}	/* Don't probe these addrs */
+#define CFG_I2C_NOPROBES        {0x69}  /* Don't probe these addrs */
 
-#define CFG_PCI_MEM_BASE	0xe0000000
-#define CFG_PCI_MEM_PHYS	0xe0000000
-#define CFG_PCI_MEM_SIZE	0x10000000
+/* RapidIO MMU */
+#define CFG_RIO_MEM_BASE	0xc0000000	/* base address */
+#define CFG_RIO_MEM_PHYS	CFG_RIO_MEM_BASE
+#define CFG_RIO_MEM_SIZE	0x20000000	/* 128M */
+
+/*
+ * General PCI
+ * Addresses are mapped 1-1.
+ */
+#define CFG_PCI1_MEM_BASE	0x80000000
+#define CFG_PCI1_MEM_PHYS	CFG_PCI1_MEM_BASE
+#define CFG_PCI1_MEM_SIZE	0x20000000	/* 512M */
+#define CFG_PCI1_IO_BASE	0xe2000000
+#define CFG_PCI1_IO_PHYS	CFG_PCI1_IO_BASE
+#define CFG_PCI1_IO_SIZE	0x1000000	/* 16M */
+
+#if defined(CONFIG_PCI)
 
-#if defined(CONFIG_PCI)			/* PCI Ethernet card */
 #define CONFIG_NET_MULTI
-#define CONFIG_EEPRO100
+#define CONFIG_PCI_PNP		       	/* do pci plug-and-play */
+
+#undef CONFIG_EEPRO100
 #undef CONFIG_TULIP
-#define CONFIG_PCI_PNP			/* do pci plug-and-play */
-  #if !defined(CONFIG_PCI_PNP)
-  #define PCI_ENET0_IOADDR	0xe0000000
-  #define PCI_ENET0_MEMADDR	0xe0000000
-  #define PCI_IDSEL_NUMBER	0x0c	/* slot0->3(IDSEL)=12->15 */
-  #endif
-#define CONFIG_PCI_SCAN_SHOW	1	/* show pci devices on startup	*/
-#define CFG_PCI_SUBSYS_VENDORID 0x1057	/* Motorola */
-#if defined(CONFIG_MPC85xx_REV1)	/* Errata PCI 7 */
-  #define CFG_PCI_SUBSYS_DEVICEID 0x0003
-#else
-  #define CFG_PCI_SUBSYS_DEVICEID 0x0009
+
+#if !defined(CONFIG_PCI_PNP)
+    #define PCI_ENET0_IOADDR	0xe0000000
+    #define PCI_ENET0_MEMADDR	0xe0000000
+    #define PCI_IDSEL_NUMBER	0x0c 	/* slot0->3(IDSEL)=12->15 */
 #endif
-#elif defined(CONFIG_TSEC_ENET)		/* TSEC Ethernet port */
-#define CONFIG_NET_MULTI	1
-#define CONFIG_PHY_M88E1011	 1	 /* GigaBit Ether PHY	     */
-#define CONFIG_MII		1	/* MII PHY management		*/
-#define CONFIG_PHY_ADDR		8	/* PHY address			*/
+
+#undef CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
+#define CFG_PCI_SUBSYS_VENDORID 0x1057  /* Motorola */
+
+#endif	/* CONFIG_PCI */
+
+
+#if defined(CONFIG_TSEC_ENET)
+
+#ifndef CONFIG_NET_MULTI
+#define CONFIG_NET_MULTI 	1
+#endif
+
+#define CONFIG_MII		1	/* MII PHY management */
+#define CONFIG_MPC85XX_TSEC1	1
+#define CONFIG_MPC85XX_TSEC2	1
+#undef CONFIG_MPC85XX_FEC
+#define TSEC1_PHY_ADDR		0
+#define TSEC2_PHY_ADDR		1
+#define TSEC1_PHYIDX		0
+#define TSEC2_PHYIDX		0
+#define CONFIG_ETHPRIME		"MOTO ENET0"
+
 #elif defined(CONFIG_ETHER_ON_FCC)	/* CPM FCC Ethernet */
-#define CONFIG_ETHER_ON_FCC		/* define if ether on FCC   */
-#undef	CONFIG_ETHER_NONE		/* define if ether on something else */
-#define CONFIG_ETHER_INDEX	2	/* which channel for ether  */
-  #if (CONFIG_ETHER_INDEX == 2)
+
+#define CONFIG_ETHER_ON_FCC	/* define if ether on FCC   */
+#undef  CONFIG_ETHER_NONE	/* define if ether on something else */
+#define CONFIG_ETHER_INDEX      2       /* which channel for ether */
+
+#if (CONFIG_ETHER_INDEX == 2)
   /*
    * - Rx-CLK is CLK13
    * - Tx-CLK is CLK14
    * - Select bus for bd/buffers
    * - Full duplex
    */
-  #define CFG_CMXFCR_MASK	(CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK)
-  #define CFG_CMXFCR_VALUE	(CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14)
-  #define CFG_CPMFCR_RAMTYPE	0
-  #define CFG_FCC_PSMR		(FCC_PSMR_FDE)
+  #define CFG_CMXFCR_MASK       (CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK)
+  #define CFG_CMXFCR_VALUE      (CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14)
+  #define CFG_CPMFCR_RAMTYPE    0
+  #define CFG_FCC_PSMR          (FCC_PSMR_FDE)
   #define FETH2_RST		0x01
-  #elif (CONFIG_ETHER_INDEX == 3)
+#elif (CONFIG_ETHER_INDEX == 3)
   /* need more definitions here for FE3 */
   #define FETH3_RST		0x80
-  #endif				/* CONFIG_ETHER_INDEX */
+#endif  				/* CONFIG_ETHER_INDEX */
+
 #define CONFIG_MII			/* MII PHY management */
-#define CONFIG_BITBANGMII		/* bit-bang MII PHY management	*/
+#define CONFIG_BITBANGMII		/* bit-bang MII PHY management */
+
 /*
  * GPIO pins used for bit-banged MII communications
  */
@@ -256,9 +394,13 @@
 			else	iop->pdat &= ~0x00200000
 
 #define MIIDELAY	udelay(1)
+
 #endif
 
-/* Environment */
+
+/*
+ * Environment
+ */
 #ifndef CFG_RAMBOOT
   #if defined(CONFIG_RAM_AS_FLASH)
   #define CFG_ENV_IS_NOWHERE
@@ -267,83 +409,92 @@
   #else
   #define CFG_ENV_IS_IN_FLASH	1
   #define CFG_ENV_ADDR		(CFG_MONITOR_BASE + 0x40000)
-  #define CFG_ENV_SECT_SIZE	0x40000 /* 128K(one sector) for env */
+  #define CFG_ENV_SECT_SIZE	0x40000	/* 256K(one sector) for env */
   #endif
   #define CFG_ENV_SIZE		0x2000
 #else
-#define CFG_NO_FLASH		1	/* Flash is not usable now	*/
-#define CFG_ENV_IS_NOWHERE	1	/* Store ENV in memory only	*/
+#define CFG_NO_FLASH		1	/* Flash is not usable now */
+#define CFG_ENV_IS_NOWHERE	1	/* Store ENV in memory only */
 #define CFG_ENV_ADDR		(CFG_MONITOR_BASE - 0x1000)
 #define CFG_ENV_SIZE		0x2000
 #endif
 
-#define CONFIG_BOOTARGS "root=/dev/nfs rw nfsroot=163.12.64.52:/localhome/r6aads/linuxppc/target ip=10.82.0.105:163.12.64.52:10.82.1.254:255.255.254.0:mpc8560ads-003:eth0:off console=ttyS0,115200"
-/*#define CONFIG_BOOTARGS      "root=/dev/ram rw console=ttyS0,115200"*/
-#define CONFIG_BOOTCOMMAND	"bootm 0xff400000 0xff700000"
-#define CONFIG_BOOTDELAY	3	/* -1 disable autoboot */
-
-#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
+#define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
+#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
 
 #if defined(CFG_RAMBOOT) || defined(CONFIG_RAM_AS_FLASH)
   #if defined(CONFIG_PCI)
-  #define  CONFIG_COMMANDS	((CONFIG_CMD_DFL | CFG_CMD_PCI | \
-				CFG_CMD_PING | CFG_CMD_I2C) & \
-				 ~(CFG_CMD_ENV | \
-				  CFG_CMD_LOADS ))
+    #define  CONFIG_COMMANDS	((CONFIG_CMD_DFL	\
+				 | CFG_CMD_PCI		\
+				 | CFG_CMD_PING		\
+				 | CFG_CMD_I2C)		\
+				&			\
+				 ~(CFG_CMD_ENV \
+				  | CFG_CMD_LOADS))
   #elif defined(CONFIG_TSEC_ENET)
-  #define  CONFIG_COMMANDS	((CONFIG_CMD_DFL | CFG_CMD_PING | \
-				CFG_CMD_I2C ) & \
-				~(CFG_CMD_ENV))
+    #define  CONFIG_COMMANDS	((CONFIG_CMD_DFL	\
+				| CFG_CMD_PING		\
+				| CFG_CMD_I2C)		\
+				& ~(CFG_CMD_ENV))
   #elif defined(CONFIG_ETHER_ON_FCC)
-  #define  CONFIG_COMMANDS	((CONFIG_CMD_DFL | CFG_CMD_MII | \
-				CFG_CMD_PING | CFG_CMD_I2C) & \
-				~(CFG_CMD_ENV))
+    #define  CONFIG_COMMANDS	((CONFIG_CMD_DFL	\
+				 | CFG_CMD_MII		\
+				 | CFG_CMD_PING		\
+				 | CFG_CMD_I2C)		\
+				& ~(CFG_CMD_ENV))
   #endif
 #else
   #if defined(CONFIG_PCI)
-  #define  CONFIG_COMMANDS	(CONFIG_CMD_DFL | CFG_CMD_PCI | \
-				CFG_CMD_PING | CFG_CMD_I2C)
+    #define  CONFIG_COMMANDS	(CONFIG_CMD_DFL		\
+				| CFG_CMD_PCI		\
+				| CFG_CMD_PING		\
+				| CFG_CMD_I2C)
   #elif defined(CONFIG_TSEC_ENET)
-  #define  CONFIG_COMMANDS	(CONFIG_CMD_DFL | CFG_CMD_PING | \
-				CFG_CMD_I2C)
+    #define  CONFIG_COMMANDS	(CONFIG_CMD_DFL		\
+				| CFG_CMD_PING		\
+				| CFG_CMD_I2C)
   #elif defined(CONFIG_ETHER_ON_FCC)
-  #define  CONFIG_COMMANDS	(CONFIG_CMD_DFL | CFG_CMD_MII | \
-				CFG_CMD_PING | CFG_CMD_I2C)
+    #define  CONFIG_COMMANDS	(CONFIG_CMD_DFL		\
+				| CFG_CMD_MII		\
+				| CFG_CMD_PING		\
+				| CFG_CMD_I2C)
   #endif
 #endif
+
 #include <cmd_confdefs.h>
 
-#undef CONFIG_WATCHDOG			/* watchdog disabled		*/
+#undef CONFIG_WATCHDOG			/* watchdog disabled */
 
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory		*/
-#define CFG_PROMPT	"MPC8560ADS=> " /* Monitor Command Prompt	*/
+#define CFG_LONGHELP			/* undef to save memory	*/
+#define CFG_LOAD_ADDR	0x1000000	/* default load address */
+#define CFG_PROMPT	"=> "		/* Monitor Command Prompt */
+
 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+    #define CFG_CBSIZE	1024		/* Console I/O Buffer Size */
 #else
-#define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+    #define CFG_CBSIZE	256		/* Console I/O Buffer Size */
 #endif
+
 #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS	16		/* max number of command args	*/
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
-#define CFG_LOAD_ADDR	0x1000000	/* default load address */
-#define CFG_HZ		1000		/* decrementer freq: 1 ms ticks */
+#define CFG_MAXARGS	16		/* max number of command args */
+#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size */
+#define CFG_HZ		1000		/* decrementer freq: 1ms ticks */
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ		(8 << 20) /* Initial Memory map for Linux */
+#define CFG_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/
 
 /* Cache Configuration */
 #define CFG_DCACHE_SIZE		32768
 #define CFG_CACHELINE_SIZE	32
 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
+#define CFG_CACHELINE_SHIFT	5	/*log base 2 of the above value*/
 #endif
 
 /*
@@ -352,26 +503,58 @@
  * Boot Flags
  */
 #define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM	0x02		/* Software reboot		*/
+#define BOOTFLAG_WARM	0x02		/* Software reboot */
 
 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
-/*Note: change below for your network setting!!! */
+/* The mac addresses for all ethernet interface */
 #if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC)
-#define CONFIG_ETHADDR	00:01:af:07:9b:8a
-#define CONFIG_ETH1ADDR	 00:01:af:07:9b:8b
-#define CONFIG_ETH2ADDR	 00:01:af:07:9b:8c
+#define CONFIG_ETHADDR   00:E0:0C:00:00:FD
+#define CONFIG_ETH1ADDR  00:E0:0C:00:01:FD
+#define CONFIG_ETH2ADDR  00:E0:0C:00:02:FD
 #endif
 
-#define CONFIG_SERVERIP		163.12.64.52
-#define CONFIG_IPADDR		10.82.0.105
-#define CONFIG_GATEWAYIP	10.82.1.254
-#define CONFIG_NETMASK		255.255.254.0
-#define CONFIG_HOSTNAME		MPC8560ADS_PILOT_003
-#define CONFIG_ROOTPATH		/home/r6aads/mpclinux/eldk-2.0.2/ppc_82xx
-#define CONFIG_BOOTFILE		pImage
+#define CONFIG_IPADDR    192.168.1.253
+
+#define CONFIG_HOSTNAME		unknown
+#define CONFIG_ROOTPATH		/nfsroot
+#define CONFIG_BOOTFILE		your.uImage
+
+#define CONFIG_SERVERIP  192.168.1.1
+#define CONFIG_GATEWAYIP 192.168.1.1
+#define CONFIG_NETMASK   255.255.255.0
+
+#define CONFIG_LOADADDR  200000	/* default location for tftp and bootm */
+
+#define CONFIG_BOOTDELAY  10	/* -1 disables auto-boot */
+#undef  CONFIG_BOOTARGS		/* the boot command will set bootargs */
+
+#define CONFIG_BAUDRATE	115200
+
+#define	CONFIG_EXTRA_ENV_SETTINGS					\
+   "netdev=eth0\0"                                                      \
+   "consoledev=ttyS0\0"                                                 \
+   "ramdiskaddr=400000\0"						\
+   "ramdiskfile=your.ramdisk.u-boot\0"
+
+#define CONFIG_NFSBOOTCOMMAND						\
+   "setenv bootargs root=/dev/nfs rw "                                  \
+      "nfsroot=$serverip:$rootpath "                                    \
+      "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
+      "console=$consoledev,$baudrate $othbootargs;"                     \
+   "tftp $loadaddr $bootfile;"                                          \
+   "bootm $loadaddr"
+
+#define CONFIG_RAMBOOTCOMMAND \
+   "setenv bootargs root=/dev/ram rw "                                  \
+      "console=$consoledev,$baudrate $othbootargs;"                     \
+   "tftp $ramdiskaddr $ramdiskfile;"                                    \
+   "tftp $loadaddr $bootfile;"                                          \
+   "bootm $loadaddr $ramdiskaddr"
+
+#define CONFIG_BOOTCOMMAND  CONFIG_NFSBOOTCOMMAND
 
 #endif	/* __CONFIG_H */
diff --git a/include/mpc85xx.h b/include/mpc85xx.h
index a4f5c61..60b6c61 100644
--- a/include/mpc85xx.h
+++ b/include/mpc85xx.h
@@ -1,4 +1,5 @@
 /*
+ * Copyright 2004 Freescale Semiconductor.
  * Copyright(c) 2003 Motorola Inc.
  * Xianghua Xiao (x.xiao@motorola.com)
  */
@@ -6,27 +7,22 @@
 #ifndef	__MPC85xx_H__
 #define __MPC85xx_H__
 
-#define EXC_OFF_SYS_RESET	0x0100	/* System reset				*/
+#define EXC_OFF_SYS_RESET	0x0100	/* System reset	*/
 
 #if defined(CONFIG_E500)
 #include <e500.h>
 #endif
 
-#if defined(CONFIG_DDR_ECC)
-void dma_init(void);
-uint dma_check(void);
-int dma_xfer(void *dest, uint count, void *src);
-#endif
-/*-----------------------------------------------------------------------
- * SCCR - System Clock Control Register                                  9-8
+/*
+ * SCCR - System Clock Control Register, 9-8
  */
-#define SCCR_CLPD       0x00000004      /* CPM Low Power Disable        */
-#define SCCR_DFBRG_MSK  0x00000003      /* Division factor of BRGCLK Mask */
+#define SCCR_CLPD       0x00000004      /* CPM Low Power Disable */
+#define SCCR_DFBRG_MSK  0x00000003      /* Division by BRGCLK Mask */
 #define SCCR_DFBRG_SHIFT 0
 
-#define SCCR_DFBRG00    0x00000000      /* BRGCLK division by 4         */
-#define SCCR_DFBRG01    0x00000001      /* BRGCLK division by 16 (normal op.)*/
-#define SCCR_DFBRG10    0x00000002      /* BRGCLK division by 64        */
-#define SCCR_DFBRG11    0x00000003      /* BRGCLK division by 256       */
+#define SCCR_DFBRG00    0x00000000      /* BRGCLK division by 4 */
+#define SCCR_DFBRG01    0x00000001      /* BRGCLK div by 16 (normal) */
+#define SCCR_DFBRG10    0x00000002      /* BRGCLK division by 64 */
+#define SCCR_DFBRG11    0x00000003      /* BRGCLK division by 256 */
 
 #endif	/* __MPC85xx_H__ */
diff --git a/lib_ppc/board.c b/lib_ppc/board.c
index 7560a42..42b4671 100644
--- a/lib_ppc/board.c
+++ b/lib_ppc/board.c
@@ -775,7 +775,8 @@ void board_init_r (gd_t *id, ulong dest_addr)
 #endif
 
 #if defined(CFG_GT_6426x) || defined(CONFIG_PN62) || defined(CONFIG_PPCHAMELEONEVB) || \
-    defined(CONFIG_MPC8540ADS) || defined(CONFIG_MPC8560ADS) || defined(CONFIG_440_GX)
+    defined(CONFIG_MPC8540ADS) || defined(CONFIG_MPC8555CDS) || \
+    defined(CONFIG_MPC8560ADS) || defined(CONFIG_440_GX)
 	/* handle the 2nd ethernet address */
 
 	s = getenv ("eth1addr");
@@ -786,8 +787,9 @@ void board_init_r (gd_t *id, ulong dest_addr)
 			s = (*e) ? e + 1 : e;
 	}
 #endif
-#if defined(CFG_GT_6426x) || defined(CONFIG_MPC8540ADS) || defined(CONFIG_MPC8560ADS) || \
-	defined(CONFIG_440_GX)
+#if defined(CFG_GT_6426x) || defined(CONFIG_MPC8540ADS) || \
+    defined(CONFIG_MPC8555CDS) || defined(CONFIG_MPC8560ADS) || \
+    defined(CONFIG_440_GX)
 	/* handle the 3rd ethernet address */
 
 	s = getenv ("eth2addr");
diff --git a/net/eth.c b/net/eth.c
index 08769ae..7059123 100644
--- a/net/eth.c
+++ b/net/eth.c
@@ -51,7 +51,7 @@ extern int rtl8139_initialize(bd_t*);
 extern int rtl8169_initialize(bd_t*);
 extern int scc_initialize(bd_t*);
 extern int skge_initialize(bd_t*);
-extern int tsec_initialize(bd_t*);
+extern int tsec_initialize(bd_t*, int);
 
 static struct eth_device *eth_devices, *eth_current;
 
@@ -147,8 +147,14 @@ int eth_initialize(bd_t *bis)
 #if defined(CONFIG_SK98)
 	skge_initialize(bis);
 #endif
-#ifdef CONFIG_TSEC_ENET
-	tsec_initialize(bis);
+#if defined(CONFIG_MPC85XX_TSEC1)
+	tsec_initialize(bis, 0);
+#endif
+#if defined(CONFIG_MPC85XX_TSEC2)
+	tsec_initialize(bis, 1);
+#endif
+#if defined(CONFIG_MPC85XX_FEC)
+	tsec_initialize(bis, 2);
 #endif
 #if defined(CONFIG_AU1X00)
 	au1x00_enet_initialize(bis);