summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorVipin KUMAR <vipin.kumar@st.com>2012-03-06 23:39:38 +0000
committerMarek Vasut <marek.vasut@gmail.com>2012-03-19 00:08:17 +0100
commitdc3e77391859f49a7b0ff403d5708f5d6ea7aba8 (patch)
tree2782a3d943ff2996d99f1a1e0b6a5f25e9945087
parent2721551a11e64ac639547211dae027eea476af4c (diff)
downloadu-boot-imx-dc3e77391859f49a7b0ff403d5708f5d6ea7aba8.zip
u-boot-imx-dc3e77391859f49a7b0ff403d5708f5d6ea7aba8.tar.gz
u-boot-imx-dc3e77391859f49a7b0ff403d5708f5d6ea7aba8.tar.bz2
USB:gadget:designware Device controller bugfixes
This patch fixes a few bugs in USB device controller driver. The fixes are as follows 1. Adding error condition checks eg. NULL return 2. Endpoint other than endpoint 0 (control endpoint) are initialized only if usb state machine reaches STATE_ADDRESSED or above 3. Zero length packet handling corrected 4. Dead code removed 5. Bulk out endpoint returns after servicing 1 interrupt and returns back to service if more interrupts are pending Signed-off-by: Vipin Kumar <vipin.kumar@st.com> Signed-off-by: Amit Virdi <amit.virdi@st.com> Acked-by: Marek Vasut <marex@denx.de>
-rw-r--r--drivers/usb/gadget/designware_udc.c59
1 files changed, 38 insertions, 21 deletions
diff --git a/drivers/usb/gadget/designware_udc.c b/drivers/usb/gadget/designware_udc.c
index aee44aa..3c20f3d 100644
--- a/drivers/usb/gadget/designware_udc.c
+++ b/drivers/usb/gadget/designware_udc.c
@@ -497,16 +497,24 @@ static void dw_udc_epn_tx(int ep)
{
struct usb_endpoint_instance *endpoint = dw_find_ep(ep);
+ if (!endpoint)
+ return;
+
/*
* We need to transmit a terminating zero-length packet now if
* we have sent all of the data in this URB and the transfer
* size was an exact multiple of the packet size.
*/
- if (endpoint && endpoint->tx_urb && endpoint->tx_urb->actual_length) {
- if (endpoint->last == endpoint->tx_packetSize) {
- /* handle zero length packet here */
- writel(0x0, &inep_regs_p[ep].write_done);
- }
+ if (endpoint->tx_urb &&
+ (endpoint->last == endpoint->tx_packetSize) &&
+ (endpoint->tx_urb->actual_length - endpoint->sent -
+ endpoint->last == 0)) {
+ /* handle zero length packet here */
+ writel(0x0, &inep_regs_p[ep].write_done);
+
+ }
+
+ if (endpoint->tx_urb && endpoint->tx_urb->actual_length) {
/* retire the data that was just sent */
usbd_tx_complete(endpoint);
/*
@@ -548,8 +556,6 @@ int udc_init(void)
readl(&plug_regs_p->plug_pending);
- udc_disconnect();
-
for (i = 0; i < UDC_INIT_MDELAY; i++)
udelay(1000);
@@ -561,10 +567,9 @@ int udc_init(void)
writel(~0x0, &udc_regs_p->endp_int_mask);
writel(DEV_CONF_FS_SPEED | DEV_CONF_REMWAKEUP | DEV_CONF_SELFPOW |
- /* Dev_Conf_SYNCFRAME | */
DEV_CONF_PHYINT_16, &udc_regs_p->dev_conf);
- writel(0x0, &udc_regs_p->dev_cntl);
+ writel(DEV_CNTL_SOFTDISCONNECT, &udc_regs_p->dev_cntl);
/* Clear all interrupts pending */
writel(DEV_INT_MSK, &udc_regs_p->dev_int);
@@ -588,6 +593,9 @@ void udc_setup_ep(struct usb_device_instance *device,
char *tt;
u32 endp_intmask;
+ if ((ep != 0) && (udc_device->device_state < STATE_ADDRESSED))
+ return;
+
tt = getenv("usbtty");
if (!tt)
tt = "generic";
@@ -647,9 +655,6 @@ void udc_setup_ep(struct usb_device_instance *device,
writel(packet_size | ((buffer_size / sizeof(int)) << 16),
&out_p->endp_maxpacksize);
- writel((packet_size << 19) | ENDP_EPTYPE_CNTL,
- &udc_regs_p->udc_endp_reg[ep_num]);
-
} else if ((ep_addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) {
/* Setup the IN endpoint */
writel(0x0, &in_p->endp_status);
@@ -708,7 +713,17 @@ void udc_setup_ep(struct usb_device_instance *device,
/* Turn on the USB connection by enabling the pullup resistor */
void udc_connect(void)
{
- u32 plug_st;
+ u32 plug_st, dev_cntl;
+
+ dev_cntl = readl(&udc_regs_p->dev_cntl);
+ dev_cntl |= DEV_CNTL_SOFTDISCONNECT;
+ writel(dev_cntl, &udc_regs_p->dev_cntl);
+
+ udelay(1000);
+
+ dev_cntl = readl(&udc_regs_p->dev_cntl);
+ dev_cntl &= ~DEV_CNTL_SOFTDISCONNECT;
+ writel(dev_cntl, &udc_regs_p->dev_cntl);
plug_st = readl(&plug_regs_p->plug_state);
plug_st &= ~(PLUG_STATUS_PHY_RESET | PLUG_STATUS_PHY_MODE);
@@ -720,6 +735,8 @@ void udc_disconnect(void)
{
u32 plug_st;
+ writel(DEV_CNTL_SOFTDISCONNECT, &udc_regs_p->dev_cntl);
+
plug_st = readl(&plug_regs_p->plug_state);
plug_st |= (PLUG_STATUS_PHY_RESET | PLUG_STATUS_PHY_MODE);
writel(plug_st, &plug_regs_p->plug_state);
@@ -789,11 +806,6 @@ void dw_udc_plug_irq(void)
UDCDBG("device attached and powered");
udc_state_transition(udc_device->device_state, STATE_POWERED);
} else {
- /*
- * USB cable detached
- * Reset the PHY and switch the mode.
- */
- udc_disconnect();
writel(~0x0, &udc_regs_p->dev_int_mask);
UDCDBG("device detached or unpowered");
@@ -809,13 +821,18 @@ void dw_udc_dev_irq(void)
if (readl(&udc_regs_p->dev_int) & DEV_INT_USBRESET) {
writel(~0x0, &udc_regs_p->endp_int_mask);
- udc_connect();
-
writel(readl(&inep_regs_p[0].endp_cntl) | ENDP_CNTL_FLUSH,
&inep_regs_p[0].endp_cntl);
writel(DEV_INT_USBRESET, &udc_regs_p->dev_int);
+ /*
+ * This endpoint0 specific register can be programmed only
+ * after the phy clock is initialized
+ */
+ writel((EP0_MAX_PACKET_SIZE << 19) | ENDP_EPTYPE_CNTL,
+ &udc_regs_p->udc_endp_reg[0]);
+
UDCDBG("device reset in progess");
udc_state_transition(udc_device->device_state, STATE_DEFAULT);
}
@@ -902,7 +919,7 @@ void dw_udc_endpoint_irq(void)
writel(ENDP0_INT_CTRLIN, &udc_regs_p->endp_int);
}
- while (readl(&udc_regs_p->endp_int) & ENDP_INT_NONISOOUT_MSK) {
+ if (readl(&udc_regs_p->endp_int) & ENDP_INT_NONISOOUT_MSK) {
u32 epnum = 0;
u32 ep_int = readl(&udc_regs_p->endp_int) &
ENDP_INT_NONISOOUT_MSK;