MLK-10478 mx6: EPDC: Improve EPDC usage and configuration

Change to load EPDC waveform from FAT partition and allocate waveform
buffer, framebuffer and working buffer in dynamic manner not static.
So many EPDC configurations are removed.

To enable the EPDC feature, must define CONFIG_MXC_EPDC and CONFIG_SPLASH_SCREEN.

Signed-off-by: Ye.Li <B37916@freescale.com>
(cherry picked from commit 4d55a4124be3a3a6288c3c845d17fd9d4f2b8b43)

Conflicts:
	include/configs/mx6slevk.h

6 files changed, 81 insertions, 175 deletions

diff --git a/board/freescale/mx6sabresd/mx6sabresd.c b/board/freescale/mx6sabresd/mx6sabresd.c
index c3d8408..03f6805 100644
--- a/board/freescale/mx6sabresd/mx6sabresd.c
+++ b/board/freescale/mx6sabresd/mx6sabresd.c
@@ -483,50 +483,6 @@ void board_late_mmc_env_init(void)
 }
 
 #if defined(CONFIG_MX6DL) && defined(CONFIG_MXC_EPDC)
-#ifdef CONFIG_SPLASH_SCREEN
-extern int mmc_get_env_devno(void);
-int setup_splash_img(void)
-{
-#ifdef CONFIG_SPLASH_IS_IN_MMC
-	int mmc_dev = mmc_get_env_devno();
-	ulong offset = CONFIG_SPLASH_IMG_OFFSET;
-	ulong size = CONFIG_SPLASH_IMG_SIZE;
-	ulong addr = 0;
-	char *s = NULL;
-	struct mmc *mmc = find_mmc_device(mmc_dev);
-	uint blk_start, blk_cnt, n;
-
-	s = getenv("splashimage");
-
-	if (NULL == s) {
-		puts("env splashimage not found!\n");
-		return -1;
-	}
-	addr = simple_strtoul(s, NULL, 16);
-
-	if (!mmc) {
-		printf("MMC Device %d not found\n", mmc_dev);
-		return -1;
-	}
-
-	if (mmc_init(mmc)) {
-		puts("MMC init failed\n");
-		return -1;
-	}
-
-	blk_start = ALIGN(offset, mmc->read_bl_len) / mmc->read_bl_len;
-	blk_cnt   = ALIGN(size, mmc->read_bl_len) / mmc->read_bl_len;
-	n = mmc->block_dev.block_read(mmc_dev, blk_start,
-					blk_cnt, (u_char *)addr);
-	flush_cache((ulong)addr, blk_cnt * mmc->read_bl_len);
-
-	return (n == blk_cnt) ? 0 : -1;
-#endif
-
-	return 0;
-}
-#endif
-
 vidinfo_t panel_info = {
 	.vl_refresh = 85,
 	.vl_col = 800,
@@ -588,36 +544,40 @@ static void setup_epdc_power(void)
 	gpio_direction_output(IMX_GPIO_NR(2, 20), 1);
 }
 
-int setup_waveform_file(void)
+int setup_waveform_file(ulong waveform_buf)
 {
-#ifdef CONFIG_WAVEFORM_FILE_IN_MMC
-	int mmc_dev = mmc_get_env_devno();
-	ulong offset = CONFIG_WAVEFORM_FILE_OFFSET;
-	ulong size = CONFIG_WAVEFORM_FILE_SIZE;
-	ulong addr = CONFIG_WAVEFORM_BUF_ADDR;
-	struct mmc *mmc = find_mmc_device(mmc_dev);
-	uint blk_start, blk_cnt, n;
-
-	if (!mmc) {
-		printf("MMC Device %d not found\n", mmc_dev);
+	char *fs_argv[5];
+	char addr[17];
+	ulong file_len, mmc_dev;
+
+	if (!check_mmc_autodetect())
+		mmc_dev = getenv_ulong("mmcdev", 10, 0);
+	else
+		mmc_dev = mmc_get_env_devno();
+
+	sprintf(addr, "%lx", waveform_buf);
+
+	fs_argv[0] = "fatload";
+	fs_argv[1] = "mmc";
+	fs_argv[2] = simple_itoa(mmc_dev);
+	fs_argv[3] = addr;
+	fs_argv[4] = getenv("epdc_waveform");
+
+	if (!fs_argv[4])
+		fs_argv[4] = "epdc_splash.bin";
+
+	if (do_fat_fsload(NULL, 0, 5, fs_argv)) {
+		printf("MMC Device %lu not found\n", mmc_dev);
 		return -1;
 	}
 
-	if (mmc_init(mmc)) {
-		puts("MMC init failed\n");
+	file_len = getenv_hex("filesize", 0);
+	if (!file_len)
 		return -1;
-	}
 
-	blk_start = ALIGN(offset, mmc->read_bl_len) / mmc->read_bl_len;
-	blk_cnt   = ALIGN(size, mmc->read_bl_len) / mmc->read_bl_len;
-	n = mmc->block_dev.block_read(mmc_dev, blk_start,
-				      blk_cnt, (u_char *)addr);
-	flush_cache((ulong)addr, blk_cnt * mmc->read_bl_len);
+	flush_cache((ulong)addr, file_len);
 
-	return (n == blk_cnt) ? 0 : -1;
-#else
-	return -1;
-#endif
+	return 0;
 }
 
 static void epdc_enable_pins(void)
@@ -687,9 +647,6 @@ static void setup_epdc(void)
 	reg |= 0x0C00;
 	writel(reg, &ccm_regs->CCGR3);
 
-	panel_info.epdc_data.working_buf_addr = CONFIG_WORKING_BUF_ADDR;
-	panel_info.epdc_data.waveform_buf_addr = CONFIG_WAVEFORM_BUF_ADDR;
-
 	panel_info.epdc_data.wv_modes.mode_init = 0;
 	panel_info.epdc_data.wv_modes.mode_du = 1;
 	panel_info.epdc_data.wv_modes.mode_gc4 = 3;
@@ -700,9 +657,6 @@ static void setup_epdc(void)
 	panel_info.epdc_data.epdc_timings = panel_timings;
 
 	setup_epdc_power();
-
-	/* Assign fb_base */
-	gd->fb_base = CONFIG_FB_BASE;
 }
 
 void epdc_power_on(void)
diff --git a/board/freescale/mx6slevk/mx6slevk.c b/board/freescale/mx6slevk/mx6slevk.c
index 3d3c55d..65aceb2 100644
--- a/board/freescale/mx6slevk/mx6slevk.c
+++ b/board/freescale/mx6slevk/mx6slevk.c
@@ -513,50 +513,6 @@ int board_early_init_f(void)
 }
 
 #ifdef CONFIG_MXC_EPDC
-#ifdef CONFIG_SPLASH_SCREEN
-extern int mmc_get_env_devno(void);
-int setup_splash_img(void)
-{
-#ifdef CONFIG_SPLASH_IS_IN_MMC
-	int mmc_dev = mmc_get_env_devno();
-	ulong offset = CONFIG_SPLASH_IMG_OFFSET;
-	ulong size = CONFIG_SPLASH_IMG_SIZE;
-	ulong addr = 0;
-	char *s = NULL;
-	struct mmc *mmc = find_mmc_device(mmc_dev);
-	uint blk_start, blk_cnt, n;
-
-	s = getenv("splashimage");
-
-	if (NULL == s) {
-		puts("env splashimage not found!\n");
-		return -1;
-	}
-	addr = simple_strtoul(s, NULL, 16);
-
-	if (!mmc) {
-		printf("MMC Device %d not found\n", mmc_dev);
-		return -1;
-	}
-
-	if (mmc_init(mmc)) {
-		puts("MMC init failed\n");
-		return -1;
-	}
-
-	blk_start = ALIGN(offset, mmc->read_bl_len) / mmc->read_bl_len;
-	blk_cnt = ALIGN(size, mmc->read_bl_len) / mmc->read_bl_len;
-	n = mmc->block_dev.block_read(mmc_dev, blk_start,
-				      blk_cnt, (u_char *)addr);
-	flush_cache((ulong)addr, blk_cnt * mmc->read_bl_len);
-
-	return (n == blk_cnt) ? 0 : -1;
-#endif
-
-	return 0;
-}
-#endif
-
 vidinfo_t panel_info = {
 	.vl_refresh = 85,
 	.vl_col = 800,
@@ -617,36 +573,40 @@ static void setup_epdc_power(void)
 	gpio_direction_output(IMX_GPIO_NR(2, 7), 1);
 }
 
-int setup_waveform_file(void)
+int setup_waveform_file(ulong waveform_buf)
 {
-#ifdef CONFIG_WAVEFORM_FILE_IN_MMC
-	int mmc_dev = mmc_get_env_devno();
-	ulong offset = CONFIG_WAVEFORM_FILE_OFFSET;
-	ulong size = CONFIG_WAVEFORM_FILE_SIZE;
-	ulong addr = CONFIG_WAVEFORM_BUF_ADDR;
-	struct mmc *mmc = find_mmc_device(mmc_dev);
-	uint blk_start, blk_cnt, n;
+	char *fs_argv[5];
+	char addr[17];
+	ulong file_len, mmc_dev;
+
+	if (!check_mmc_autodetect())
+		mmc_dev = getenv_ulong("mmcdev", 10, 0);
+	else
+		mmc_dev = mmc_get_env_devno();
+
+	sprintf(addr, "%lx", waveform_buf);
+
+	fs_argv[0] = "fatload";
+	fs_argv[1] = "mmc";
+	fs_argv[2] = simple_itoa(mmc_dev);
+	fs_argv[3] = addr;
+	fs_argv[4] = getenv("epdc_waveform");
 
-	if (!mmc) {
-		printf("MMC Device %d not found\n", mmc_dev);
+	if (!fs_argv[4])
+		fs_argv[4] = "epdc_splash.bin";
+
+	if (do_fat_fsload(NULL, 0, 5, fs_argv)) {
+		printf("MMC Device %lu not found\n", mmc_dev);
 		return -1;
 	}
 
-	if (mmc_init(mmc)) {
-		puts("MMC init failed\n");
+	file_len = getenv_hex("filesize", 0);
+	if (!file_len)
 		return -1;
-	}
 
-	blk_start = ALIGN(offset, mmc->read_bl_len) / mmc->read_bl_len;
-	blk_cnt = ALIGN(size, mmc->read_bl_len) / mmc->read_bl_len;
-	n = mmc->block_dev.block_read(mmc_dev, blk_start,
-				      blk_cnt, (u_char *)addr);
-	flush_cache((ulong)addr, blk_cnt * mmc->read_bl_len);
+	flush_cache((ulong)addr, file_len);
 
-	return (n == blk_cnt) ? 0 : -1;
-#else
-	return -1;
-#endif
+	return 0;
 }
 
 static void epdc_enable_pins(void)
@@ -714,9 +674,6 @@ static void setup_epdc(void)
 	reg |= 0x0C00;
 	writel(reg, CCM_BASE_ADDR + CLKCTL_CCGR3);
 
-	panel_info.epdc_data.working_buf_addr = CONFIG_WORKING_BUF_ADDR;
-	panel_info.epdc_data.waveform_buf_addr = CONFIG_WAVEFORM_BUF_ADDR;
-
 	panel_info.epdc_data.wv_modes.mode_init = 0;
 	panel_info.epdc_data.wv_modes.mode_du = 1;
 	panel_info.epdc_data.wv_modes.mode_gc4 = 3;
@@ -727,9 +684,6 @@ static void setup_epdc(void)
 	panel_info.epdc_data.epdc_timings = panel_timings;
 
 	setup_epdc_power();
-
-	/* Assign fb_base */
-	gd->fb_base = CONFIG_FB_BASE;
 }
 
 void epdc_power_on(void)
diff --git a/drivers/video/mxc_epdc_fb.c b/drivers/video/mxc_epdc_fb.c
index 5a400e1..cd18058 100644
--- a/drivers/video/mxc_epdc_fb.c
+++ b/drivers/video/mxc_epdc_fb.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2010-2014 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2010-2015 Freescale Semiconductor, Inc. All Rights Reserved.
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */
@@ -13,6 +13,7 @@
 #include <linux/list.h>
 #include <linux/err.h>
 #include <linux/types.h>
+#include <malloc.h>
 
 #include <mxc_epdc_fb.h>
 
@@ -353,7 +354,6 @@ void lcd_enable(void)
 
 	epdc_power_on();
 
-	lcd_base = (void *)CONFIG_FB_BASE;
 	/* Draw black border around framebuffer*/
 	memset(lcd_base, 0xFF, panel_info.vl_col * panel_info.vl_row);
 	memset(lcd_base, 0x0, 24 * panel_info.vl_col);
@@ -397,6 +397,22 @@ void lcd_ctrl_init(void *lcdbase)
 	if (!lcdbase)
 		return;
 
+	panel_info.epdc_data.working_buf_addr = (u_long)memalign(ARCH_DMA_MINALIGN,
+		panel_info.vl_col * panel_info.vl_row * 2);
+
+	if (!panel_info.epdc_data.working_buf_addr) {
+		printf("EPDC: Error allocating working buffer!\n");
+		return;
+	}
+
+	panel_info.epdc_data.waveform_buf_addr = (u_long)memalign(ARCH_DMA_MINALIGN,
+		CONFIG_WAVEFORM_BUF_SIZE);
+
+	if (!panel_info.epdc_data.waveform_buf_addr) {
+		printf("EPDC: Error allocating waveform buffer!\n");
+		return;
+	}
+
 	lcd_color_fg = 0xFF;
 	lcd_color_bg = 0xFF;
 
@@ -431,7 +447,7 @@ void lcd_ctrl_init(void *lcdbase)
 		REG_WR(EPDC_BASE, EPDC_WB_ADDR_TCE, panel_info.epdc_data.working_buf_addr);
 
 	/* Get waveform data address and offset */
-	if (setup_waveform_file()) {
+	if (setup_waveform_file(panel_info.epdc_data.waveform_buf_addr)) {
 		printf("Can't load waveform data!\n");
 		return;
 	}
@@ -443,6 +459,8 @@ void lcd_ctrl_init(void *lcdbase)
 	/* Initialize EPDC, passing pointer to EPDC registers */
 	epdc_init_settings();
 
+	lcd_base = lcdbase;
+
 	return;
 }
 
diff --git a/include/configs/mx6sabre_common.h b/include/configs/mx6sabre_common.h
index c8fffb4..ecf2df0 100644
--- a/include/configs/mx6sabre_common.h
+++ b/include/configs/mx6sabre_common.h
@@ -40,7 +40,7 @@
 #define CONFIG_SYS_GENERIC_BOARD
 
 /* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN		(10 * SZ_1M)
+#define CONFIG_SYS_MALLOC_LEN		(16 * SZ_1M)
 
 #define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_BOARD_LATE_INIT
@@ -180,6 +180,7 @@
 #else
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	CONFIG_MFG_ENV_SETTINGS \
+	"epdc_waveform=epdc_splash.bin\0" \
 	"script=boot.scr\0" \
 	"image=zImage\0" \
 	"fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
diff --git a/include/configs/mx6sabresd.h b/include/configs/mx6sabresd.h
index a37873e..d9a699d 100644
--- a/include/configs/mx6sabresd.h
+++ b/include/configs/mx6sabresd.h
@@ -96,23 +96,13 @@
 	 */
 	#define CONFIG_CMD_BMP
 	#define CONFIG_LCD
-	#define CONFIG_FB_BASE				(CONFIG_SYS_TEXT_BASE + 0x300000)
 	#define CONFIG_SYS_CONSOLE_IS_IN_ENV
 	#undef LCD_TEST_PATTERN
 	/* #define CONFIG_SPLASH_IS_IN_MMC			1 */
 	#define LCD_BPP					LCD_MONOCHROME
 	/* #define CONFIG_SPLASH_SCREEN_ALIGN		1 */
 
-	#define CONFIG_WORKING_BUF_ADDR			(CONFIG_SYS_TEXT_BASE + 0x100000)
-	#define CONFIG_WAVEFORM_BUF_ADDR		(CONFIG_SYS_TEXT_BASE + 0x200000)
-	#define CONFIG_WAVEFORM_FILE_OFFSET		0x600000
-	#define CONFIG_WAVEFORM_FILE_SIZE		0xF0A00
-	#define CONFIG_WAVEFORM_FILE_IN_MMC
-
-#ifdef CONFIG_SPLASH_IS_IN_MMC
-	#define CONFIG_SPLASH_IMG_OFFSET		0x4c000
-	#define CONFIG_SPLASH_IMG_SIZE			0x19000
-#endif
+	#define CONFIG_WAVEFORM_BUF_SIZE		0x200000
 #endif /* CONFIG_SPLASH_SCREEN && CONFIG_MXC_EPDC */
 
 #endif                         /* __MX6QSABRESD_CONFIG_H */
diff --git a/include/configs/mx6slevk.h b/include/configs/mx6slevk.h
index 8d770b1..05e6f47 100644
--- a/include/configs/mx6slevk.h
+++ b/include/configs/mx6slevk.h
@@ -1,5 +1,5 @@
 /*
- * Copyright 2013 Freescale Semiconductor, Inc.
+ * Copyright (C) 2013-2015 Freescale Semiconductor, Inc.
  *
  * Configuration settings for the Freescale i.MX6SL EVK board.
  *
@@ -35,7 +35,7 @@
 #define CONFIG_SYS_GENERIC_BOARD
 
 /* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN		(3 * SZ_1M)
+#define CONFIG_SYS_MALLOC_LEN		(16 * SZ_1M)
 
 #define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_BOARD_LATE_INIT
@@ -113,6 +113,7 @@
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	CONFIG_MFG_ENV_SETTINGS \
+	"epdc_waveform=epdc_splash.bin\0" \
 	"script=boot.scr\0" \
 	"image=zImage\0" \
 	"console=ttymxc0\0" \
@@ -298,24 +299,12 @@
 	#define CONFIG_CMD_BMP
 	#define CONFIG_MXC_EPDC				1
 	#define CONFIG_LCD
-	#define CONFIG_FB_BASE				(CONFIG_SYS_TEXT_BASE + 0x300000)
 	#define CONFIG_SYS_CONSOLE_IS_IN_ENV
 #ifdef CONFIG_MXC_EPDC
 	#undef LCD_TEST_PATTERN
-	/* #define CONFIG_SPLASH_IS_IN_MMC			1 */
 	#define LCD_BPP					LCD_MONOCHROME
-	/* #define CONFIG_SPLASH_SCREEN_ALIGN		1 */
 
-	#define CONFIG_WORKING_BUF_ADDR			(CONFIG_SYS_TEXT_BASE + 0x100000)
-	#define CONFIG_WAVEFORM_BUF_ADDR		(CONFIG_SYS_TEXT_BASE + 0x200000)
-	#define CONFIG_WAVEFORM_FILE_OFFSET		0x600000
-	#define CONFIG_WAVEFORM_FILE_SIZE		0xF0A00
-	#define CONFIG_WAVEFORM_FILE_IN_MMC
-
-#ifdef CONFIG_SPLASH_IS_IN_MMC
-	#define CONFIG_SPLASH_IMG_OFFSET		0x4c000
-	#define CONFIG_SPLASH_IMG_SIZE			0x19000
-#endif
+	#define CONFIG_WAVEFORM_BUF_SIZE		0x200000
 #endif
 #endif /* CONFIG_SPLASH_SCREEN */