Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'

10 files changed, 80 insertions, 43 deletions

diff --git a/arch/arm/cpu/arm926ejs/omap/timer.c b/arch/arm/cpu/arm926ejs/omap/timer.c
index 34ec7b2..16530b0 100644
--- a/arch/arm/cpu/arm926ejs/omap/timer.c
+++ b/arch/arm/cpu/arm926ejs/omap/timer.c
@@ -36,11 +36,14 @@
  */
 
 #include <common.h>
+#include <asm/io.h>
 
-#define TIMER_LOAD_VAL 0xffffffff
+#define TIMER_CLOCK	(CONFIG_SYS_CLK_FREQ / (2 << CONFIG_SYS_PTV))
+#define TIMER_LOAD_VAL	0xffffffff
 
 /* macro to read the 32 bit timer */
-#define READ_TIMER (*(volatile ulong *)(CONFIG_SYS_TIMERBASE+8))
+#define READ_TIMER	readl(CONFIG_SYS_TIMERBASE+8) \
+			/ (TIMER_CLOCK / CONFIG_SYS_HZ)
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -114,7 +117,8 @@ ulong get_timer_masked (void)
 		 * (TLV-now) amount of time after passing though -1
 		 * nts = new "advancing time stamp"...it could also roll and cause problems.
 		 */
-		timestamp += lastdec + TIMER_LOAD_VAL - now;
+		timestamp += lastdec + (TIMER_LOAD_VAL / (TIMER_CLOCK /
+					CONFIG_SYS_HZ)) - now;
 	}
 	lastdec = now;
 
@@ -160,8 +164,5 @@ unsigned long long get_ticks(void)
  */
 ulong get_tbclk (void)
 {
-	ulong tbclk;
-
-	tbclk = CONFIG_SYS_HZ;
-	return tbclk;
+	return CONFIG_SYS_HZ;
 }
diff --git a/arch/arm/cpu/armv7/omap4/hw_data.c b/arch/arm/cpu/armv7/omap4/hw_data.c
index 7551b98..04977b4 100644
--- a/arch/arm/cpu/armv7/omap4/hw_data.c
+++ b/arch/arm/cpu/armv7/omap4/hw_data.c
@@ -216,14 +216,14 @@ struct dplls omap4460_dplls = {
 
 struct pmic_data twl6030_4430es1 = {
 	.base_offset = PHOENIX_SMPS_BASE_VOLT_STD_MODE_UV,
-	.step = 12660, /* 10 mV represented in uV */
+	.step = 12660, /* 12.66 mV represented in uV */
 	/* The code starts at 1 not 0 */
 	.start_code = 1,
 };
 
 struct pmic_data twl6030 = {
 	.base_offset = PHOENIX_SMPS_BASE_VOLT_STD_MODE_WITH_OFFSET_UV,
-	.step = 12660, /* 10 mV represented in uV */
+	.step = 12660, /* 12.66 mV represented in uV */
 	/* The code starts at 1 not 0 */
 	.start_code = 1,
 };
@@ -271,11 +271,11 @@ struct vcores_data omap4460_volts = {
 
 	.core.value = 1200,
 	.core.addr = SMPS_REG_ADDR_VCORE1,
-	.core.pmic = &tps62361,
+	.core.pmic = &twl6030,
 
 	.mm.value = 1200,
 	.mm.addr = SMPS_REG_ADDR_VCORE2,
-	.mm.pmic = &tps62361,
+	.mm.pmic = &twl6030,
 };
 
 /*
diff --git a/arch/arm/include/asm/arch-am33xx/ddr_defs.h b/arch/arm/include/asm/arch-am33xx/ddr_defs.h
index 260cc34..914df01 100644
--- a/arch/arm/include/asm/arch-am33xx/ddr_defs.h
+++ b/arch/arm/include/asm/arch-am33xx/ddr_defs.h
@@ -84,19 +84,19 @@
 #define MT41J256M8HX15E_IOCTRL_VALUE		0x18B
 
 /* Micron MT41K256M16HA-125E */
-#define MT41K256M16HA125E_EMIF_READ_LATENCY	0x100006
-#define MT41K256M16HA125E_EMIF_TIM1		0x0888A39B
-#define MT41K256M16HA125E_EMIF_TIM2		0x26517FDA
-#define MT41K256M16HA125E_EMIF_TIM3		0x501F84EF
-#define MT41K256M16HA125E_EMIF_SDCFG		0x61C04BB2
-#define MT41K256M16HA125E_EMIF_SDREF		0x0000093B
+#define MT41K256M16HA125E_EMIF_READ_LATENCY	0x100007
+#define MT41K256M16HA125E_EMIF_TIM1		0x0AAAD4DB
+#define MT41K256M16HA125E_EMIF_TIM2		0x26437FDA
+#define MT41K256M16HA125E_EMIF_TIM3		0x501F83FF
+#define MT41K256M16HA125E_EMIF_SDCFG		0x61C052B2
+#define MT41K256M16HA125E_EMIF_SDREF		0xC30
 #define MT41K256M16HA125E_ZQ_CFG		0x50074BE4
 #define MT41K256M16HA125E_DLL_LOCK_DIFF		0x1
-#define MT41K256M16HA125E_RATIO			0x40
+#define MT41K256M16HA125E_RATIO			0x80
 #define MT41K256M16HA125E_INVERT_CLKOUT		0x0
-#define MT41K256M16HA125E_RD_DQS		0x3C
-#define MT41K256M16HA125E_WR_DQS		0x45
-#define MT41K256M16HA125E_PHY_WR_DATA		0x7F
+#define MT41K256M16HA125E_RD_DQS		0x3A
+#define MT41K256M16HA125E_WR_DQS		0x42
+#define MT41K256M16HA125E_PHY_WR_DATA		0x7E
 #define MT41K256M16HA125E_PHY_FIFO_WE		0x9B
 #define MT41K256M16HA125E_IOCTRL_VALUE		0x18B
 
diff --git a/arch/arm/include/asm/arch-am33xx/spl.h b/arch/arm/include/asm/arch-am33xx/spl.h
index 14a2c7c..4c23b27 100644
--- a/arch/arm/include/asm/arch-am33xx/spl.h
+++ b/arch/arm/include/asm/arch-am33xx/spl.h
@@ -38,6 +38,11 @@
 #define BOOT_DEVICE_CPGMAC	70
 #define BOOT_DEVICE_MMC2_2      0xFF
 
+#ifdef CONFIG_AM33XX
 #define MMC_BOOT_DEVICES_START	BOOT_DEVICE_MMC1
 #define MMC_BOOT_DEVICES_END	BOOT_DEVICE_MMC2
+#elif defined(CONFIG_TI814X)
+#define MMC_BOOT_DEVICES_START	BOOT_DEVICE_MMC2
+#define MMC_BOOT_DEVICES_END	BOOT_DEVICE_MMC1
+#endif
 #endif
diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c
index 12620bb..b371376 100644
--- a/board/ti/am335x/board.c
+++ b/board/ti/am335x/board.c
@@ -379,7 +379,7 @@ void s_init(void)
 		config_ddr(303, MT41J128MJT125_IOCTRL_VALUE, &ddr3_data,
 			   &ddr3_cmd_ctrl_data, &ddr3_emif_reg_data, 0);
 	else if (board_is_bone_lt())
-		config_ddr(303, MT41K256M16HA125E_IOCTRL_VALUE,
+		config_ddr(400, MT41K256M16HA125E_IOCTRL_VALUE,
 			   &ddr3_beagleblack_data,
 			   &ddr3_beagleblack_cmd_ctrl_data,
 			   &ddr3_beagleblack_emif_reg_data, 0);
diff --git a/board/ti/omap5912osk/config.mk b/board/ti/omap5912osk/config.mk
index 0ed7d8a..5b8d952 100644
--- a/board/ti/omap5912osk/config.mk
+++ b/board/ti/omap5912osk/config.mk
@@ -14,17 +14,17 @@
 # TI OSK board with OMAP5912 (ARM925EJS) cpu
 # see http://www.ti.com/ for more information on Texas Instruments
 #
-# OSK has 1 bank of 256 MB SDRAM
+# OSK has 1 bank of 32 MB SDRAM
 # Physical Address:
-# 1000'0000 to 2000'0000
+# 1000'0000 to 1200'0000
 #
 #
 # Linux-Kernel is expected to be at 1000'8000, entry 1000'8000
 # (mem base + reserved)
 #
-# we load ourself to 1108'0000
+# When running from RAM use address 1108'0000, otherwise when
+# booting from NOR flash link to address 0000'0000.
 #
-#
-
 
-CONFIG_SYS_TEXT_BASE = 0x11080000
+CONFIG_SYS_TEXT_BASE = 0x00000000
+#CONFIG_SYS_TEXT_BASE = 0x11080000
diff --git a/board/ti/omap5912osk/lowlevel_init.S b/board/ti/omap5912osk/lowlevel_init.S
index e60161e..ca7361e 100644
--- a/board/ti/omap5912osk/lowlevel_init.S
+++ b/board/ti/omap5912osk/lowlevel_init.S
@@ -306,6 +306,23 @@ common_tc:
 	ldr	r1,	VAL_MPU_CNTL_TIMER
 	str	r1,	[r0]
 
+	/*
+	 * Setup a temporary stack
+	 */
+	ldr	sp,	SRAM_STACK
+	bic	sp, sp, #7 /* 8-byte alignment for ABI compliance */
+
+	/*
+	 * Save the old lr(passed in ip) and the current lr to stack
+	 */
+	push	{ip, lr}
+
+	/*
+	 * go setup pll, mux, memory
+	 */
+	bl	s_init
+	pop	{ip, pc}
+
 	/* back to arch calling code */
 	mov	pc,	lr
 
@@ -470,6 +487,9 @@ VAL_ARM_IDLECT2:
 VAL_ARM_IDLECT3:
 	.word 0x00000015
 
+SRAM_STACK:
+	.word CONFIG_SYS_INIT_SP_ADDR
+
 /* command values */
 .equ CMD_SDRAM_NOP,             0x00000000
 .equ CMD_SDRAM_PRECHARGE,       0x00000001
diff --git a/board/ti/omap5912osk/omap5912osk.c b/board/ti/omap5912osk/omap5912osk.c
index fac683a..9514071 100644
--- a/board/ti/omap5912osk/omap5912osk.c
+++ b/board/ti/omap5912osk/omap5912osk.c
@@ -66,6 +66,14 @@ int board_init (void)
 	/* adress of boot parameters */
 	gd->bd->bi_boot_params = 0x10000100;
 
+	flash__init();
+	ether__init();
+
+	return 0;
+}
+
+void s_init(void)
+{
 	/* Configure MUX settings */
 	set_muxconf_regs ();
 	peripheral_power_enable ();
@@ -75,10 +83,6 @@ int board_init (void)
  *  ... rkw ...
  */
 	icache_enable ();
-
-	flash__init ();
-	ether__init ();
-	return 0;
 }
 
 /******************************
@@ -128,14 +132,19 @@ void ether__init (void)
  Routine:
  Description:
 ******************************/
-int dram_init (void)
+int dram_init(void)
 {
-	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
-	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+	gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE);
 
 	return 0;
 }
 
+void dram_init_banksize(void)
+{
+	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+}
+
 /******************************************************
  Routine: set_muxconf_regs
  Description: Setting up the configuration Mux registers
diff --git a/include/configs/omap5912osk.h b/include/configs/omap5912osk.h
index 40ca9bb..c5797a2 100644
--- a/include/configs/omap5912osk.h
+++ b/include/configs/omap5912osk.h
@@ -134,7 +134,7 @@
  */
 #define CONFIG_SYS_TIMERBASE	0xFFFEC500	/* use timer 1 */
 #define CONFIG_SYS_PTV		7	/* 2^(PTV+1), divide by 256 */
-#define CONFIG_SYS_HZ		((CONFIG_SYS_CLK_FREQ)/(2 << CONFIG_SYS_PTV))
+#define CONFIG_SYS_HZ		1000
 
 /*-----------------------------------------------------------------------
  * Physical Memory Map
@@ -178,12 +178,15 @@
  */
 #define CONFIG_ENV_IS_IN_FLASH	1
 /* addr of environment */
-#define CONFIG_ENV_ADDR	(CONFIG_SYS_FLASH_BASE + 0x020000)
+#define CONFIG_ENV_ADDR	(CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
 
-#define CONFIG_ENV_SIZE	0x20000	/* Total Size of Environment Sector */
-#define CONFIG_ENV_OFFSET	0x20000	/* environment starts here  */
+#define CONFIG_ENV_SIZE		0x20000	/* Total Size of Environment Sector */
+#define CONFIG_ENV_OFFSET	0x40000	/* environment starts here  */
 
-#define CONFIG_SYS_SDRAM_BASE	PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_SP_ADDR PHYS_SRAM
+#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_RAM_ADDR        PHYS_SRAM
+#define CONFIG_SYS_INIT_RAM_SIZE        (250 * 1024)
+#define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_INIT_RAM_ADDR + \
+					 CONFIG_SYS_INIT_RAM_SIZE)
 
 #endif							/* __CONFIG_H */
diff --git a/include/configs/omap5_uevm.h b/include/configs/omap5_uevm.h
index e490523..240fdfc 100644
--- a/include/configs/omap5_uevm.h
+++ b/include/configs/omap5_uevm.h
@@ -31,8 +31,7 @@
 /* Define the default GPT table for eMMC */
 #define PARTS_DEFAULT \
 	"uuid_disk=${uuid_gpt_disk};" \
-	"name=u-boot,size=1792KiB,uuid=${uuid_gpt_u-boot};" \
-	"name=rootfs,size=-,uuid=${uuid_gpt_rootfs}"
+	"name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}"
 
 #include <configs/omap5_common.h>