mini2440: remove board support

Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
Acked-by: Minkyu Kang <mk7.kang@samsung.com>

6 files changed, 3 insertions, 301 deletions

diff --git a/board/friendlyarm/mini2440/Makefile b/board/friendlyarm/mini2440/Makefile
deleted file mode 100644
index f367107..0000000
--- a/board/friendlyarm/mini2440/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2012
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	:= mini2440.o
diff --git a/board/friendlyarm/mini2440/mini2440.c b/board/friendlyarm/mini2440/mini2440.c
deleted file mode 100644
index 59ed054..0000000
--- a/board/friendlyarm/mini2440/mini2440.c
+++ /dev/null
@@ -1,118 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
- *
- * (C) Copyright 2009
- * Michel Pollet <buserror@gmail.com>
- *
- * (C) Copyright 2012
- * Gabriel Huau <contact@huau-gabriel.fr>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/arch/s3c2440.h>
-#include <asm/arch/iomux.h>
-#include <asm/arch/gpio.h>
-#include <asm/io.h>
-#include <asm/gpio.h>
-#include <netdev.h>
-#include "mini2440.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static inline void pll_delay(unsigned long loops)
-{
-	__asm__ volatile ("1:\n"
-	  "subs %0, %1, #1\n"
-	  "bne 1b" : "=r" (loops) : "0" (loops));
-}
-
-int board_early_init_f(void)
-{
-	struct s3c24x0_clock_power * const clk_power =
-					s3c24x0_get_base_clock_power();
-
-	/* to reduce PLL lock time, adjust the LOCKTIME register */
-	clk_power->locktime = 0xFFFFFF; /* Max PLL Lock time count */
-	clk_power->clkdivn = CLKDIVN_VAL;
-
-	/* configure UPLL */
-	clk_power->upllcon = ((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV);
-	/* some delay between MPLL and UPLL */
-	pll_delay(100);
-
-	/* configure MPLL */
-	clk_power->mpllcon = ((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV);
-
-	/* some delay between MPLL and UPLL */
-	pll_delay(10000);
-
-	return 0;
-}
-
-/*
- * Miscellaneous platform dependent initialisations
- */
-int board_init(void)
-{
-	struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
-
-	/* IOMUX Port H : UART Configuration */
-	gpio->gphcon = IOMUXH_nCTS0 | IOMUXH_nRTS0 | IOMUXH_TXD0 | IOMUXH_RXD0 |
-		IOMUXH_TXD1 | IOMUXH_RXD1 | IOMUXH_TXD2 | IOMUXH_RXD2;
-
-	gpio_direction_output(GPH8, 0);
-	gpio_direction_output(GPH9, 0);
-	gpio_direction_output(GPH10, 0);
-
-	/* adress of boot parameters */
-	gd->bd->bi_boot_params = CONFIG_BOOT_PARAM_ADDR;
-
-	return 0;
-}
-
-int dram_init(void)
-{
-	struct s3c24x0_memctl *memctl = s3c24x0_get_base_memctl();
-
-	/*
-	 * Configuring bus width and timing
-	 * Initialize clocks for each bank 0..5
-	 * Bank 3 and 4 are used for DM9000
-	 */
-	writel(BANK_CONF, &memctl->bwscon);
-	writel(B0_CONF, &memctl->bankcon[0]);
-	writel(B1_CONF, &memctl->bankcon[1]);
-	writel(B2_CONF, &memctl->bankcon[2]);
-	writel(B3_CONF, &memctl->bankcon[3]);
-	writel(B4_CONF, &memctl->bankcon[4]);
-	writel(B5_CONF, &memctl->bankcon[5]);
-
-	/* Bank 6 and 7 are used for DRAM */
-	writel(SDRAM_64MB, &memctl->bankcon[6]);
-	writel(SDRAM_64MB, &memctl->bankcon[7]);
-
-	writel(MEM_TIMING, &memctl->refresh);
-	writel(BANKSIZE_CONF, &memctl->banksize);
-	writel(B6_MRSR, &memctl->mrsrb6);
-	writel(B7_MRSR, &memctl->mrsrb7);
-
-	gd->ram_size = get_ram_size((void *) CONFIG_SYS_SDRAM_BASE,
-			PHYS_SDRAM_SIZE);
-	return 0;
-}
-
-int board_eth_init(bd_t *bis)
-{
-#ifdef CONFIG_DRIVER_DM9000
-	return dm9000_initialize(bis);
-#else
-	return 0;
-#endif
-}
diff --git a/board/friendlyarm/mini2440/mini2440.h b/board/friendlyarm/mini2440/mini2440.h
deleted file mode 100644
index db386ea..0000000
--- a/board/friendlyarm/mini2440/mini2440.h
+++ /dev/null
@@ -1,144 +0,0 @@
-#ifndef __MINI2440_BOARD_CONF_H__
-#define __MINI2440_BOARD_CONF_H__
-
-/* PLL Parameters */
-#define CLKDIVN_VAL	7
-#define M_MDIV		0x7f
-#define M_PDIV		0x2
-#define M_SDIV		0x1
-
-#define U_M_MDIV	0x38
-#define U_M_PDIV	0x2
-#define U_M_SDIV	0x2
-
-/* BWSCON */
-#define DW8				0x0
-#define DW16			0x1
-#define DW32			0x2
-#define WAIT			(0x1<<2)
-#define UBLB			(0x1<<3)
-
-#define B1_BWSCON		(DW32)
-#define B2_BWSCON		(DW16)
-#define B3_BWSCON		(DW16 + WAIT + UBLB)
-#define B4_BWSCON		(DW16 + WAIT + UBLB)
-#define B5_BWSCON		(DW16)
-#define B6_BWSCON		(DW32)
-#define B7_BWSCON		(DW32)
-
-/*
- * Bank Configuration
- */
-#define B0_Tacs			0x0	/*  0clk */
-#define B0_Tcos			0x0	/*  0clk */
-#define B0_Tacc			0x7	/* 14clk */
-#define B0_Tcoh			0x0	/*  0clk */
-#define B0_Tah			0x0	/*  0clk */
-#define B0_Tacp			0x0 /*  0clk */
-#define B0_PMC			0x0	/* normal */
-
-#define B1_Tacs			0x0
-#define B1_Tcos			0x0
-#define B1_Tacc			0x7
-#define B1_Tcoh			0x0
-#define B1_Tah			0x0
-#define B1_Tacp			0x0
-#define B1_PMC			0x0
-
-#define B2_Tacs			0x0
-#define B2_Tcos			0x0
-#define B2_Tacc			0x7
-#define B2_Tcoh			0x0
-#define B2_Tah			0x0
-#define B2_Tacp			0x0
-#define B2_PMC			0x0
-
-#define B3_Tacs			0x0
-#define B3_Tcos			0x3	/*  4clk */
-#define B3_Tacc			0x7
-#define B3_Tcoh			0x1	/*  1clk */
-#define B3_Tah			0x3	/*  4clk */
-#define B3_Tacp			0x0
-#define B3_PMC			0x0
-
-#define B4_Tacs			0x0
-#define B4_Tcos			0x3
-#define B4_Tacc			0x7
-#define B4_Tcoh			0x1
-#define B4_Tah			0x3
-#define B4_Tacp			0x0
-#define B4_PMC			0x0
-
-#define B5_Tacs			0x0
-#define B5_Tcos			0x0
-#define B5_Tacc			0x7
-#define B5_Tcoh			0x0
-#define B5_Tah			0x0
-#define B5_Tacp			0x0
-#define B5_PMC			0x0
-
-/*
- * SDRAM Configuration
- */
-#define SDRAM_MT		0x3	/* SDRAM */
-#define SDRAM_Trcd		0x0	/* 2clk */
-#define SDRAM_SCAN_9	0x1	/* 9bit */
-#define SDRAM_SCAN_10	0x2	/* 10bit */
-
-#define SDRAM_64MB	((SDRAM_MT<<15) + (SDRAM_Trcd<<2) + (SDRAM_SCAN_9))
-
-/*
- * Refresh Parameter
- */
-#define REFEN		0x1	/* Refresh enable */
-#define TREFMD		0x0	/* CBR(CAS before RAS)/Auto refresh */
-#define Trp			0x1	/* 3clk */
-#define Trc			0x3	/* 7clk */
-#define Tchr		0x0	/* unused */
-#define REFCNT	1012 /* period=10.37us, HCLK=100Mhz, (2048 + 1-10.37*100) */
-
-/*
- * MRSR Parameter
- */
-#define BL	0x0
-#define BT	0x0
-#define CL	0x3 /* 3 clocks */
-#define TM	0x0
-#define WBL	0x0
-
-/*
- * BankSize Parameter
- */
-#define BK76MAP	0x2 /* 128MB/128MB */
-#define SCLK_EN	0x1 /* SCLK active */
-#define SCKE_EN	0x1 /* SDRAM power down mode enable */
-#define BURST_EN	0x1 /* Burst enable */
-
-/*
- * Register values
- */
-#define BANK_CONF ((0 + (B1_BWSCON<<4) + (B2_BWSCON<<8) + (B3_BWSCON<<12) + \
-			(B4_BWSCON<<16) + (B5_BWSCON<<20) + (B6_BWSCON<<24) + \
-			(B7_BWSCON<<28)))
-
-#define B0_CONF	((B0_Tacs<<13) + (B0_Tcos<<11) + (B0_Tacc<<8) + \
-		(B0_Tcoh<<6) + (B0_Tah<<4) + (B0_Tacp<<2) + (B0_PMC))
-#define B1_CONF	((B1_Tacs<<13) + (B1_Tcos<<11) + (B1_Tacc<<8) + \
-		(B1_Tcoh<<6) + (B1_Tah<<4) + (B1_Tacp<<2) + (B1_PMC))
-#define B2_CONF	((B2_Tacs<<13) + (B2_Tcos<<11) + (B2_Tacc<<8) + \
-		(B2_Tcoh<<6) + (B2_Tah<<4) + (B2_Tacp<<2) + (B2_PMC))
-#define B3_CONF	((B3_Tacs<<13) + (B3_Tcos<<11) + (B3_Tacc<<8) + \
-		(B3_Tcoh<<6) + (B3_Tah<<4) + (B3_Tacp<<2) + (B3_PMC))
-#define B4_CONF	((B4_Tacs<<13) + (B4_Tcos<<11) + (B4_Tacc<<8) + \
-		(B4_Tcoh<<6) + (B4_Tah<<4) + (B4_Tacp<<2) + (B4_PMC))
-#define B5_CONF	((B5_Tacs<<13) + (B5_Tcos<<11) + (B5_Tacc<<8) + \
-		(B5_Tcoh<<6) + (B5_Tah<<4) + (B5_Tacp<<2) + (B5_PMC))
-
-#define MEM_TIMING (REFEN<<23) + (TREFMD<<22) + (Trp<<20) + \
-	(Trc<<18) + (Tchr<<16) + REFCNT
-
-#define BANKSIZE_CONF	(BK76MAP) + (SCLK_EN<<4) + (SCKE_EN<<5) + (BURST_EN<<7)
-#define B6_MRSR			(CL<<4)
-#define B7_MRSR			(CL<<4)
-
-#endif
diff --git a/boards.cfg b/boards.cfg
index d177f82..af73934 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -69,7 +69,6 @@ Active  arm         arm920t        imx         -               -
 Active  arm         arm920t        imx         -               -                   scb9328                              -                                                                                                                                 Torsten Koschorrek <koschorrek@synertronixx.de>
 Active  arm         arm920t        ks8695      -               -                   cm4008                               -                                                                                                                                 Greg Ungerer <greg.ungerer@opengear.com>
 Active  arm         arm920t        ks8695      -               -                   cm41xx                               -                                                                                                                                 -
-Active  arm         arm920t        s3c24x0     friendlyarm     mini2440            mini2440                             -                                                                                                                                 Gabriel Huau <contact@huau-gabriel.fr>
 Active  arm         arm920t        s3c24x0     mpl             vcma9               VCMA9                                -                                                                                                                                 David Müller <d.mueller@elsoft.ch>
 Active  arm         arm920t        s3c24x0     samsung         -                   smdk2410                             -                                                                                                                                 David Müller <d.mueller@elsoft.ch>
 Active  arm         arm926ejs      -           armltd          integrator          integratorap_cm926ejs                integratorap:CM926EJ_S                                                                                                            Linus Walleij <linus.walleij@linaro.org>
diff --git a/doc/README.mini2440 b/doc/README.mini2440
deleted file mode 100644
index 311ca52..0000000
--- a/doc/README.mini2440
+++ /dev/null
@@ -1,28 +0,0 @@
-U-Boot for FriendlyARM Mini2440 (s3c2440)
-
-This file contains information for the port of U-Boot to FriendlyARM
-mini2440
-
-All information about the board can be found on :
-http://www.friendlyarm.net/products/mini2440
-
-To build u-boot : ./MAKEALL mini2440
-
-Overview :
---------
-FriendlyARM Mini 2440 SBC (Single-Board Computer) with 400 MHz Samsung S3C2440
-ARM9 processor. The board measures 100 x 100 mm, ideal for learning about ARM9
-systems. It's a low cost board.
-
-Boot Methods :
-------------
-Mini2440 can boot from NOR or NAND.
-
-Build :
------
-./MAKEALL mini2440
-
-or
-
-make mini2440_config
-make
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index 604de0c..be3e97e 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -11,8 +11,9 @@ easily if here is something they might want to dig for...
 
 Board            Arch        CPU            Commit      Removed     Last known maintainer/contact
 =================================================================================================
-omap730p2        arm         arm926ejs      -           2013-11-11
-pn62             powerpc     mpc824x        -           2013-11-11  Wolfgang Grandegger <wg@grandegger.com>
+mini2440         arm         arm920t        -           2014-01-13  Gabriel Huau <contact@huau-gabriel.fr>
+omap730p2        arm         arm926ejs      79c5c08d    2013-11-11
+pn62             powerpc     mpc824x        649acfe1    2013-11-11  Wolfgang Grandegger <wg@grandegger.com>
 pdnb3            arm         ixp            304db0b     2013-09-24  Stefan Roese <sr@denx.de>
 scpu             arm         ixp            304db0b     2013-09-24  Stefan Roese <sr@denx.de>
 omap1510inn      arm         arm925t        0610a16     2013-09-23  Kshitij Gupta <kshitij@ti.com>