summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorStefan Roese <sr@denx.de>2012-09-19 14:33:52 +0200
committerTom Rini <trini@ti.com>2012-10-15 11:53:59 -0700
commit99bcad1809d073a7ec5a6f8ed49637693904e2de (patch)
tree9516e894a30ca0cff3f7b88bfe3e5d2e9e3d42ab
parentf2760c4acd5b7a198632d002528ec7c227ea27b8 (diff)
downloadu-boot-imx-99bcad1809d073a7ec5a6f8ed49637693904e2de.zip
u-boot-imx-99bcad1809d073a7ec5a6f8ed49637693904e2de.tar.gz
u-boot-imx-99bcad1809d073a7ec5a6f8ed49637693904e2de.tar.bz2
ppc4xx: Remove IOP480 support
Since the IOP480 (PPC401/3 variant from PLX) is only used on 2 boards that are not actively maintained, lets remove support for it completely. This way the ppc4xx code will get a bit cleaner. Signed-off-by: Stefan Roese <sr@denx.de> Acked-by: Matthias Fuchs <matthias.fuchs@esd.eu> Acked-by: Marek Vasut <marex@denx.de>
-rw-r--r--MAINTAINERS2
-rw-r--r--arch/powerpc/cpu/ppc4xx/Makefile1
-rw-r--r--arch/powerpc/cpu/ppc4xx/cpu.c16
-rw-r--r--arch/powerpc/cpu/ppc4xx/iop480_uart.c254
-rw-r--r--arch/powerpc/cpu/ppc4xx/speed.c17
-rw-r--r--arch/powerpc/cpu/ppc4xx/start.S108
-rw-r--r--arch/powerpc/include/asm/cache.h2
-rw-r--r--arch/powerpc/include/asm/ppc405.h4
-rw-r--r--boards.cfg2
-rw-r--r--include/common.h2
-rw-r--r--include/configs/ADCIOP.h203
-rw-r--r--include/configs/DASA_SIM.h194
-rw-r--r--include/vxworks.h2
13 files changed, 3 insertions, 804 deletions
diff --git a/MAINTAINERS b/MAINTAINERS
index e76f71c..9f3e4ba 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -179,7 +179,6 @@ Thomas Frieden <ThomasF@hyperion-entertainment.com>
Matthias Fuchs <matthias.fuchs@esd-electronics.com>
- ADCIOP IOP480 (PPC401)
APC405 PPC405GP
AR405 PPC405GP
ASH405 PPC405EP
@@ -190,7 +189,6 @@ Matthias Fuchs <matthias.fuchs@esd-electronics.com>
CPCI405AB PPC405GP
CPCI405DT PPC405GP
CPCIISER4 PPC405GP
- DASA_SIM IOP480 (PPC401)
DP405 PPC405EP
DU405 PPC405GP
DU440 PPC440EPx
diff --git a/arch/powerpc/cpu/ppc4xx/Makefile b/arch/powerpc/cpu/ppc4xx/Makefile
index 3d62255..8da2f86 100644
--- a/arch/powerpc/cpu/ppc4xx/Makefile
+++ b/arch/powerpc/cpu/ppc4xx/Makefile
@@ -53,7 +53,6 @@ COBJS += ecc.o
COBJS-$(CONFIG_CMD_ECCTEST) += cmd_ecctest.o
COBJS += fdt.o
COBJS += interrupts.o
-COBJS += iop480_uart.o
COBJS-$(CONFIG_CMD_REGINFO) += reginfo.o
COBJS += sdram.o
COBJS += speed.o
diff --git a/arch/powerpc/cpu/ppc4xx/cpu.c b/arch/powerpc/cpu/ppc4xx/cpu.c
index 67f1fff..60aba8c 100644
--- a/arch/powerpc/cpu/ppc4xx/cpu.c
+++ b/arch/powerpc/cpu/ppc4xx/cpu.c
@@ -79,7 +79,7 @@ static int pci_async_enabled(void)
#endif
#endif /* CONFIG_PCI */
-#if defined(CONFIG_PCI) && !defined(CONFIG_IOP480) && \
+#if defined(CONFIG_PCI) && \
!defined(CONFIG_405) && !defined(CONFIG_405EX)
int pci_arbiter_enabled(void)
{
@@ -303,7 +303,6 @@ int checkcpu (void)
u32 reg;
#endif
-#if !defined(CONFIG_IOP480)
char addstr[64] = "";
sys_info_t sys_info;
int cpu_num;
@@ -671,14 +670,6 @@ int checkcpu (void)
printf (" 16 kB I-Cache %d kB D-Cache",
((pvr | 0x00000001) == PVR_405GPR_RB) ? 16 : 8);
#endif
-#endif /* !defined(CONFIG_IOP480) */
-
-#if defined(CONFIG_IOP480)
- printf ("PLX IOP480 (PVR=%08x)", pvr);
- printf (" at %s MHz:", strmhz(buf, clock));
- printf (" %u kB I-Cache", 4);
- printf (" %u kB D-Cache", 2);
-#endif
#endif /* !defined(CONFIG_405) */
@@ -723,15 +714,10 @@ int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
*/
unsigned long get_tbclk (void)
{
-#if !defined(CONFIG_IOP480)
sys_info_t sys_info;
get_sys_info(&sys_info);
return (sys_info.freqProcessor);
-#else
- return (66000000);
-#endif
-
}
diff --git a/arch/powerpc/cpu/ppc4xx/iop480_uart.c b/arch/powerpc/cpu/ppc4xx/iop480_uart.c
deleted file mode 100644
index 9473984..0000000
--- a/arch/powerpc/cpu/ppc4xx/iop480_uart.c
+++ /dev/null
@@ -1,254 +0,0 @@
-/*
- * (C) Copyright 2000-2006
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <commproc.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <watchdog.h>
-#include <serial.h>
-#include <linux/compiler.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#ifdef CONFIG_IOP480
-
-#define SPU_BASE 0x40000000
-
-#define spu_LineStat_rc 0x00 /* Line Status Register (Read/Clear) */
-#define spu_LineStat_w 0x04 /* Line Status Register (Set) */
-#define spu_Handshk_rc 0x08 /* Handshake Status Register (Read/Clear) */
-#define spu_Handshk_w 0x0c /* Handshake Status Register (Set) */
-#define spu_BRateDivh 0x10 /* Baud rate divisor high */
-#define spu_BRateDivl 0x14 /* Baud rate divisor low */
-#define spu_CtlReg 0x18 /* Control Register */
-#define spu_RxCmd 0x1c /* Rx Command Register */
-#define spu_TxCmd 0x20 /* Tx Command Register */
-#define spu_RxBuff 0x24 /* Rx data buffer */
-#define spu_TxBuff 0x24 /* Tx data buffer */
-
-/*-----------------------------------------------------------------------------+
- | Line Status Register.
- +-----------------------------------------------------------------------------*/
-#define asyncLSRport1 0x40000000
-#define asyncLSRport1set 0x40000004
-#define asyncLSRDataReady 0x80
-#define asyncLSRFramingError 0x40
-#define asyncLSROverrunError 0x20
-#define asyncLSRParityError 0x10
-#define asyncLSRBreakInterrupt 0x08
-#define asyncLSRTxHoldEmpty 0x04
-#define asyncLSRTxShiftEmpty 0x02
-
-/*-----------------------------------------------------------------------------+
- | Handshake Status Register.
- +-----------------------------------------------------------------------------*/
-#define asyncHSRport1 0x40000008
-#define asyncHSRport1set 0x4000000c
-#define asyncHSRDsr 0x80
-#define asyncLSRCts 0x40
-
-/*-----------------------------------------------------------------------------+
- | Control Register.
- +-----------------------------------------------------------------------------*/
-#define asyncCRport1 0x40000018
-#define asyncCRNormal 0x00
-#define asyncCRLoopback 0x40
-#define asyncCRAutoEcho 0x80
-#define asyncCRDtr 0x20
-#define asyncCRRts 0x10
-#define asyncCRWordLength7 0x00
-#define asyncCRWordLength8 0x08
-#define asyncCRParityDisable 0x00
-#define asyncCRParityEnable 0x04
-#define asyncCREvenParity 0x00
-#define asyncCROddParity 0x02
-#define asyncCRStopBitsOne 0x00
-#define asyncCRStopBitsTwo 0x01
-#define asyncCRDisableDtrRts 0x00
-
-/*-----------------------------------------------------------------------------+
- | Receiver Command Register.
- +-----------------------------------------------------------------------------*/
-#define asyncRCRport1 0x4000001c
-#define asyncRCRDisable 0x00
-#define asyncRCREnable 0x80
-#define asyncRCRIntDisable 0x00
-#define asyncRCRIntEnabled 0x20
-#define asyncRCRDMACh2 0x40
-#define asyncRCRDMACh3 0x60
-#define asyncRCRErrorInt 0x10
-#define asyncRCRPauseEnable 0x08
-
-/*-----------------------------------------------------------------------------+
- | Transmitter Command Register.
- +-----------------------------------------------------------------------------*/
-#define asyncTCRport1 0x40000020
-#define asyncTCRDisable 0x00
-#define asyncTCREnable 0x80
-#define asyncTCRIntDisable 0x00
-#define asyncTCRIntEnabled 0x20
-#define asyncTCRDMACh2 0x40
-#define asyncTCRDMACh3 0x60
-#define asyncTCRTxEmpty 0x10
-#define asyncTCRErrorInt 0x08
-#define asyncTCRStopPause 0x04
-#define asyncTCRBreakGen 0x02
-
-/*-----------------------------------------------------------------------------+
- | Miscellanies defines.
- +-----------------------------------------------------------------------------*/
-#define asyncTxBufferport1 0x40000024
-#define asyncRxBufferport1 0x40000024
-#define asyncDLABLsbport1 0x40000014
-#define asyncDLABMsbport1 0x40000010
-#define asyncXOFFchar 0x13
-#define asyncXONchar 0x11
-
-/*
- * Minimal serial functions needed to use one of the SMC ports
- * as serial console interface.
- */
-
-static int iop480_serial_init(void)
-{
- unsigned short br_reg;
-
- br_reg = ((((CONFIG_CPUCLOCK * 1000000) / 16) / gd->baudrate) - 1);
-
- /*
- * Init onboard UART
- */
- out_8((u8 *)SPU_BASE + spu_LineStat_rc, 0x78); /* Clear all bits in Line Status Reg */
- out_8((u8 *)SPU_BASE + spu_BRateDivl, (br_reg & 0x00ff)); /* Set baud rate divisor... */
- out_8((u8 *)SPU_BASE + spu_BRateDivh, ((br_reg & 0xff00) >> 8)); /* ... */
- out_8((u8 *)SPU_BASE + spu_CtlReg, 0x08); /* Set 8 bits, no parity and 1 stop bit */
- out_8((u8 *)SPU_BASE + spu_RxCmd, 0xb0); /* Enable Rx */
- out_8((u8 *)SPU_BASE + spu_TxCmd, 0x9c); /* Enable Tx */
- out_8((u8 *)SPU_BASE + spu_Handshk_rc, 0xff); /* Clear Handshake */
- in_8((u8 *)SPU_BASE + spu_RxBuff); /* Dummy read, to clear receiver */
-
- return (0);
-}
-
-static void iop480_serial_setbrg(void)
-{
- unsigned short br_reg;
-
- br_reg = ((((CONFIG_CPUCLOCK * 1000000) / 16) / gd->baudrate) - 1);
-
- out_8((u8 *)SPU_BASE + spu_BRateDivl,
- (br_reg & 0x00ff)); /* Set baud rate divisor... */
- out_8((u8 *)SPU_BASE + spu_BRateDivh,
- ((br_reg & 0xff00) >> 8)); /* ... */
-}
-
-static void iop480_serial_putc(const char c)
-{
- if (c == '\n')
- serial_putc ('\r');
-
- /* load status from handshake register */
- if (in_8((u8 *)SPU_BASE + spu_Handshk_rc) != 00)
- out_8((u8 *)SPU_BASE + spu_Handshk_rc, 0xff); /* Clear Handshake */
-
- out_8((u8 *)SPU_BASE + spu_TxBuff, c); /* Put char */
-
- while ((in_8((u8 *)SPU_BASE + spu_LineStat_rc) & 04) != 04) {
- if (in_8((u8 *)SPU_BASE + spu_Handshk_rc) != 00)
- out_8((u8 *)SPU_BASE + spu_Handshk_rc, 0xff); /* Clear Handshake */
- }
-}
-
-static void iop480_serial_puts(const char *s)
-{
- while (*s) {
- serial_putc (*s++);
- }
-}
-
-static int iop480_serial_getc(void)
-{
- unsigned char status = 0;
-
- while (1) {
- status = in_8((u8 *)asyncLSRport1);
- if ((status & asyncLSRDataReady) != 0x0) {
- break;
- }
- if ((status & ( asyncLSRFramingError |
- asyncLSROverrunError |
- asyncLSRParityError |
- asyncLSRBreakInterrupt )) != 0) {
- (void) out_8((u8 *)asyncLSRport1,
- asyncLSRFramingError |
- asyncLSROverrunError |
- asyncLSRParityError |
- asyncLSRBreakInterrupt );
- }
- }
- return (0x000000ff & (int) in_8((u8 *)asyncRxBufferport1));
-}
-
-static int iop480_serial_tstc(void)
-{
- unsigned char status;
-
- status = in_8((u8 *)asyncLSRport1);
- if ((status & asyncLSRDataReady) != 0x0) {
- return (1);
- }
- if ((status & ( asyncLSRFramingError |
- asyncLSROverrunError |
- asyncLSRParityError |
- asyncLSRBreakInterrupt )) != 0) {
- (void) out_8((u8 *)asyncLSRport1,
- asyncLSRFramingError |
- asyncLSROverrunError |
- asyncLSRParityError |
- asyncLSRBreakInterrupt);
- }
- return 0;
-}
-
-static struct serial_device iop480_serial_drv = {
- .name = "iop480_serial",
- .start = iop480_serial_init,
- .stop = NULL,
- .setbrg = iop480_serial_setbrg,
- .putc = iop480_serial_putc,
- .puts = iop480_serial_puts,
- .getc = iop480_serial_getc,
- .tstc = iop480_serial_tstc,
-};
-
-void iop480_serial_initialize(void)
-{
- serial_register(&iop480_serial_drv);
-}
-
-__weak struct serial_device *default_serial_console(void)
-{
- return &iop480_serial_drv;
-}
-#endif /* CONFIG_IOP480 */
diff --git a/arch/powerpc/cpu/ppc4xx/speed.c b/arch/powerpc/cpu/ppc4xx/speed.c
index 09d6671..6156ac9 100644
--- a/arch/powerpc/cpu/ppc4xx/speed.c
+++ b/arch/powerpc/cpu/ppc4xx/speed.c
@@ -1190,22 +1190,12 @@ void get_sys_info (sys_info_t * sysInfo)
int get_clocks (void)
{
-#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || \
- defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \
- defined(CONFIG_405EX) || defined(CONFIG_405) || \
- defined(CONFIG_440)
sys_info_t sys_info;
get_sys_info (&sys_info);
gd->cpu_clk = sys_info.freqProcessor;
gd->bus_clk = sys_info.freqPLB;
-#endif /* defined(CONFIG_405GP) || defined(CONFIG_405CR) */
-
-#ifdef CONFIG_IOP480
- gd->cpu_clk = 66000000;
- gd->bus_clk = 66000000;
-#endif
return (0);
}
@@ -1226,11 +1216,6 @@ ulong get_bus_freq (ulong dummy)
get_sys_info (&sys_info);
val = sys_info.freqPLB;
-
-#elif defined(CONFIG_IOP480)
-
- val = 66;
-
#else
# error get_bus_freq() not implemented
#endif
@@ -1238,7 +1223,6 @@ ulong get_bus_freq (ulong dummy)
return val;
}
-#if !defined(CONFIG_IOP480)
ulong get_OPB_freq (void)
{
PPC4xx_SYS_INFO sys_info;
@@ -1247,4 +1231,3 @@ ulong get_OPB_freq (void)
return sys_info.freqOPB;
}
-#endif
diff --git a/arch/powerpc/cpu/ppc4xx/start.S b/arch/powerpc/cpu/ppc4xx/start.S
index 3b0e364..7aef43b 100644
--- a/arch/powerpc/cpu/ppc4xx/start.S
+++ b/arch/powerpc/cpu/ppc4xx/start.S
@@ -806,114 +806,6 @@ _start:
#endif /* CONFIG_440 */
/*****************************************************************************/
-#ifdef CONFIG_IOP480
- /*----------------------------------------------------------------------- */
- /* Set up some machine state registers. */
- /*----------------------------------------------------------------------- */
- addi r0,r0,0x0000 /* initialize r0 to zero */
- mtspr SPRN_ESR,r0 /* clear Exception Syndrome Reg */
- mttcr r0 /* timer control register */
- mtexier r0 /* disable all interrupts */
- addis r4,r0,0xFFFF /* set r4 to 0xFFFFFFFF (status in the */
- ori r4,r4,0xFFFF /* dbsr is cleared by setting bits to 1) */
- mtdbsr r4 /* clear/reset the dbsr */
- mtexisr r4 /* clear all pending interrupts */
- addis r4,r0,0x8000
- mtexier r4 /* enable critical exceptions */
- addis r4,r0,0x0000 /* assume 403GCX - enable core clk */
- ori r4,r4,0x4020 /* dbling (no harm done on GA and GC */
- mtiocr r4 /* since bit not used) & DRC to latch */
- /* data bus on rising edge of CAS */
- /*----------------------------------------------------------------------- */
- /* Clear XER. */
- /*----------------------------------------------------------------------- */
- mtxer r0
- /*----------------------------------------------------------------------- */
- /* Invalidate i-cache and d-cache TAG arrays. */
- /*----------------------------------------------------------------------- */
- addi r3,0,1024 /* 1/4 of I-cache size, half of D-cache */
- addi r4,0,1024 /* 1/4 of I-cache */
-..cloop:
- iccci 0,r3
- iccci r4,r3
- dccci 0,r3
- addic. r3,r3,-16 /* move back one cache line */
- bne ..cloop /* loop back to do rest until r3 = 0 */
-
- /* */
- /* initialize IOP480 so it can read 1 MB code area for SRAM spaces */
- /* this requires enabling MA[17..0], by default only MA[12..0] are enabled. */
- /* */
-
- /* first copy IOP480 register base address into r3 */
- addis r3,0,0x5000 /* IOP480 register base address hi */
-/* ori r3,r3,0x0000 / IOP480 register base address lo */
-
-#ifdef CONFIG_ADCIOP
- /* use r4 as the working variable */
- /* turn on CS3 (LOCCTL.7) */
- lwz r4,0x84(r3) /* LOCTL is at offset 0x84 */
- andi. r4,r4,0xff7f /* make bit 7 = 0 -- CS3 mode */
- stw r4,0x84(r3) /* LOCTL is at offset 0x84 */
-#endif
-
-#ifdef CONFIG_DASA_SIM
- /* use r4 as the working variable */
- /* turn on MA17 (LOCCTL.7) */
- lwz r4,0x84(r3) /* LOCTL is at offset 0x84 */
- ori r4,r4,0x80 /* make bit 7 = 1 -- MA17 mode */
- stw r4,0x84(r3) /* LOCTL is at offset 0x84 */
-#endif
-
- /* turn on MA16..13 (LCS0BRD.12 = 0) */
- lwz r4,0x100(r3) /* LCS0BRD is at offset 0x100 */
- andi. r4,r4,0xefff /* make bit 12 = 0 */
- stw r4,0x100(r3) /* LCS0BRD is at offset 0x100 */
-
- /* make sure above stores all comlete before going on */
- sync
-
- /* last thing, set local init status done bit (DEVINIT.31) */
- lwz r4,0x80(r3) /* DEVINIT is at offset 0x80 */
- oris r4,r4,0x8000 /* make bit 31 = 1 */
- stw r4,0x80(r3) /* DEVINIT is at offset 0x80 */
-
- /* clear all pending interrupts and disable all interrupts */
- li r4,-1 /* set p1 to 0xffffffff */
- stw r4,0x1b0(r3) /* clear all pending interrupts */
- stw r4,0x1b8(r3) /* clear all pending interrupts */
- li r4,0 /* set r4 to 0 */
- stw r4,0x1b4(r3) /* disable all interrupts */
- stw r4,0x1bc(r3) /* disable all interrupts */
-
- /* make sure above stores all comlete before going on */
- sync
-
- /* Set-up icache cacheability. */
- lis r1, CONFIG_SYS_ICACHE_SACR_VALUE@h
- ori r1, r1, CONFIG_SYS_ICACHE_SACR_VALUE@l
- mticcr r1
- isync
-
- /* Set-up dcache cacheability. */
- lis r1, CONFIG_SYS_DCACHE_SACR_VALUE@h
- ori r1, r1, CONFIG_SYS_DCACHE_SACR_VALUE@l
- mtdccr r1
-
- addis r1,r0,CONFIG_SYS_INIT_RAM_ADDR@h
- ori r1,r1,CONFIG_SYS_INIT_SP_OFFSET /* set up the stack to SDRAM */
- li r0, 0 /* Make room for stack frame header and */
- stwu r0, -4(r1) /* clear final stack frame so that */
- stwu r0, -4(r1) /* stack backtraces terminate cleanly */
-
- GET_GOT /* initialize GOT access */
-
- bl board_init_f /* run first part of init code (from Flash) */
- /* NOTREACHED - board_init_f() does not return */
-
-#endif /* CONFIG_IOP480 */
-
-/*****************************************************************************/
#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || \
defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \
defined(CONFIG_405EX) || defined(CONFIG_405)
diff --git a/arch/powerpc/include/asm/cache.h b/arch/powerpc/include/asm/cache.h
index e6b8f69..5f9c640 100644
--- a/arch/powerpc/include/asm/cache.h
+++ b/arch/powerpc/include/asm/cache.h
@@ -8,7 +8,7 @@
#include <asm/processor.h>
/* bytes per L1 cache line */
-#if defined(CONFIG_8xx) || defined(CONFIG_IOP480)
+#if defined(CONFIG_8xx)
#define L1_CACHE_SHIFT 4
#elif defined(CONFIG_PPC64BRIDGE)
#define L1_CACHE_SHIFT 7
diff --git a/arch/powerpc/include/asm/ppc405.h b/arch/powerpc/include/asm/ppc405.h
index 14a7a37..892848a 100644
--- a/arch/powerpc/include/asm/ppc405.h
+++ b/arch/powerpc/include/asm/ppc405.h
@@ -28,11 +28,7 @@
#define PPC_128MB_SACR_BIT(addr) ((addr) >> 27)
#define PPC_128MB_SACR_VALUE(addr) PPC_REG_VAL(PPC_128MB_SACR_BIT(addr),1)
-#ifndef CONFIG_IOP480
#define CONFIG_SYS_DCACHE_SIZE (16 << 10) /* For AMCC 405 CPUs */
-#else
-#define CONFIG_SYS_DCACHE_SIZE (2 << 10) /* For PLX IOP480(403)*/
-#endif
/* DCR registers */
#define PLB0_ACR 0x0087
diff --git a/boards.cfg b/boards.cfg
index 70d63a2..6abf686 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -1015,7 +1015,6 @@ PPChameleonEVB_HI_25 powerpc ppc4xx PPChameleonEVB dave
PPChameleonEVB_HI_33 powerpc ppc4xx PPChameleonEVB dave - PPChameleonEVB:PPCHAMELEON_MODULE_MODEL=2,PPCHAMELEON_CLK_33
PPChameleonEVB_ME_25 powerpc ppc4xx PPChameleonEVB dave - PPChameleonEVB:PPCHAMELEON_MODULE_MODEL=1,PPCHAMELEON_CLK_25
PPChameleonEVB_ME_33 powerpc ppc4xx PPChameleonEVB dave - PPChameleonEVB:PPCHAMELEON_MODULE_MODEL=1,PPCHAMELEON_CLK_33
-ADCIOP powerpc ppc4xx adciop esd
APC405 powerpc ppc4xx apc405 esd
AR405 powerpc ppc4xx ar405 esd
ASH405 powerpc ppc4xx ash405 esd
@@ -1027,7 +1026,6 @@ CPCI4052 powerpc ppc4xx cpci405 esd
CPCI405AB powerpc ppc4xx cpci405 esd
CPCI405DT powerpc ppc4xx cpci405 esd
CPCIISER4 powerpc ppc4xx cpciiser4 esd
-DASA_SIM powerpc ppc4xx dasa_sim esd
DP405 powerpc ppc4xx dp405 esd
DU405 powerpc ppc4xx du405 esd
DU440 powerpc ppc4xx du440 esd
diff --git a/include/common.h b/include/common.h
index 7205677..fb337791 100644
--- a/include/common.h
+++ b/include/common.h
@@ -659,7 +659,7 @@ static inline ulong get_ddr_freq(ulong dummy)
}
#endif
-#if defined(CONFIG_4xx) || defined(CONFIG_IOP480)
+#if defined(CONFIG_4xx)
# if defined(CONFIG_440)
# if defined(CONFIG_440SPE)
unsigned long determine_sysper(void);
diff --git a/include/configs/ADCIOP.h b/include/configs/ADCIOP.h
deleted file mode 100644
index 5cd8eef..0000000
--- a/include/configs/ADCIOP.h
+++ /dev/null
@@ -1,203 +0,0 @@
-/*
- * (C) Copyright 2001
- * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * board/config.h - configuration options, board specific
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_IOP480 1 /* This is a IOP480 CPU */
-#define CONFIG_ADCIOP 1 /* ...on a ADCIOP board */
-
-#define CONFIG_SYS_TEXT_BASE 0xFFFD0000
-
-#define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f() */
-
-#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */
-
-#define CONFIG_CPUCLOCK 66
-#define CONFIG_BUSCLOCK (CONFIG_CPUCLOCK)
-
-#define CONFIG_BAUDRATE 9600
-#define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */
-#define CONFIG_BOOTCOMMAND "bootm ffc00000" /* autoboot command */
-
-#undef CONFIG_BOOTARGS
-
-#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
-#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
-
-#undef CONFIG_WATCHDOG /* watchdog disabled */
-
-#define CONFIG_PHY_ADDR 0 /* PHY address */
-
-#define CONFIG_IPADDR 10.0.18.222
-#define CONFIG_SERVERIP 10.0.18.190
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_IRQ
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_ASKENV
-
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-#else
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_CONSOLE_INFO_QUIET 1 /* don't print console @ startup*/
-
-#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
-
-/* The following table includes the supported baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE \
- { 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 }
-
-#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
-
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-
-#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-#define CONFIG_SYS_INIT_RAM_ADDR 0x00df0000 /* inside of SDRAM */
-#define CONFIG_SYS_INIT_RAM_SIZE 0x0f00 /* Size of used area in RAM */
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-#define CONFIG_SYS_FLASH_BASE 0xFFFD0000
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */
-#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 256 /* max number of sectors on one chip */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
-
-#define CONFIG_SYS_FLASH_WORD_SIZE unsigned char /* flash word size (width) */
-#define CONFIG_SYS_FLASH_ADDR0 0x0AA9 /* 1st address for flash config cycles */
-#define CONFIG_SYS_FLASH_ADDR1 0x0556 /* 2nd address for flash config cycles */
-/*
- * The following defines are added for buggy IOP480 byte interface.
- * All other boards should use the standard values (CPCI405 etc.)
- */
-#define CONFIG_SYS_FLASH_READ0 0x0002 /* 0 is standard */
-#define CONFIG_SYS_FLASH_READ1 0x0000 /* 1 is standard */
-#define CONFIG_SYS_FLASH_READ2 0x0004 /* 2 is standard */
-
-#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
-
-#if 1 /* Use NVRAM for environment variables */
-/*-----------------------------------------------------------------------
- * NVRAM organization
- */
-#define CONFIG_ENV_IS_IN_NVRAM 1 /* use NVRAM for environment vars */
-#define CONFIG_SYS_NVRAM_BASE_ADDR 0x10000000 /* NVRAM base address */
-#define CONFIG_SYS_NVRAM_SIZE (32*1024) /* NVRAM size */
-#define CONFIG_ENV_SIZE 0x0400 /* Size of Environment vars */
-#define CONFIG_ENV_ADDR \
- (CONFIG_SYS_NVRAM_BASE_ADDR+CONFIG_SYS_NVRAM_SIZE-CONFIG_ENV_SIZE) /* Env */
-#define CONFIG_SYS_VXWORKS_MAC_PTR (CONFIG_SYS_NVRAM_BASE_ADDR+0x7800) /* VxWorks eth-addr*/
-
-#else /* Use FLASH for environment variables */
-
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_OFFSET 0x00010000 /* Offset of Environment Sector */
-#define CONFIG_ENV_SIZE 0x1000 /* Total Size of Environment Sector */
-
-#define CONFIG_ENV_SECT_SIZE 0x8000 /* see README - env sector total size */
-
-#endif
-
-/*-----------------------------------------------------------------------
- * PCI stuff
- */
-#define CONFIG_PCI /* include pci support */
-#undef CONFIG_PCI_PNP
-
-
-#define CONFIG_TULIP
-
-#define CONFIG_SYS_ETH_DEV_FN 0x0000
-#define CONFIG_SYS_ETH_IOBASE 0x0fff0000
-
-/*
- * Init Memory Controller:
- *
- * BR0/1 and OR0/1 (FLASH)
- */
-
-#define FLASH_BASE0_PRELIM 0xFFC00000 /* FLASH bank #0 */
-#define FLASH_BASE1_PRELIM 0xFFE00000 /* FLASH bank #1 */
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/DASA_SIM.h b/include/configs/DASA_SIM.h
deleted file mode 100644
index 6fe7fd3..0000000
--- a/include/configs/DASA_SIM.h
+++ /dev/null
@@ -1,194 +0,0 @@
-/*
- * (C) Copyright 2001
- * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * board/config.h - configuration options, board specific
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_IOP480 1 /* This is a IOP480 CPU */
-#define CONFIG_DASA_SIM 1 /* ...on a DASA_SIM board */
-
-#define CONFIG_SYS_TEXT_BASE 0xFFFC0000
-#define CONFIG_SYS_LDSCRIPT "board/esd/dasa_sim/u-boot.lds"
-
-#define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f() */
-
-#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */
-
-#define CONFIG_CPUCLOCK 66
-#define CONFIG_BUSCLOCK (CONFIG_CPUCLOCK)
-
-#define CONFIG_BAUDRATE 9600
-#define CONFIG_BOOTDELAY 3 /* autoboot after 5 seconds */
-#define CONFIG_BOOTCOMMAND "bootm ffe00000" /* autoboot command */
-
-#undef CONFIG_BOOTARGS
-
-#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
-#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
-
-#undef CONFIG_WATCHDOG /* watchdog disabled */
-
-#define CONFIG_IPADDR 10.0.18.222
-#define CONFIG_SERVERIP 10.0.18.190
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_BSP
-
-
-#if 0 /* Does not appear to be used?! If it is used, needs to be fixed */
-#define CONFIG_SOFT_I2C /* Software I2C support enabled */
-#endif
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-#else
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_CONSOLE_INFO_QUIET 1 /* don't print console @ startup*/
-
-#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
-
-/* The following table includes the supported baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE \
- { 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 }
-
-#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
-
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-
-#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-#define CONFIG_SYS_INIT_RAM_ADDR 0x00df0000 /* inside of SDRAM */
-#define CONFIG_SYS_INIT_RAM_SIZE 0x0f00 /* Size of used area in RAM */
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-#define CONFIG_SYS_FLASH_BASE 0xFFFC0000
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 128 kB for Monitor */
-#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 256 /* max number of sectors on one chip */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
-
-#define CONFIG_SYS_FLASH_WORD_SIZE unsigned char /* flash word size (width) */
-#define CONFIG_SYS_FLASH_ADDR0 0x0AA9 /* 1st address for flash config cycles */
-#define CONFIG_SYS_FLASH_ADDR1 0x0556 /* 2nd address for flash config cycles */
-/*
- * The following defines are added for buggy IOP480 byte interface.
- * All other boards should use the standard values (CPCI405 etc.)
- */
-#define CONFIG_SYS_FLASH_READ0 0x0002 /* 0 is standard */
-#define CONFIG_SYS_FLASH_READ1 0x0000 /* 1 is standard */
-#define CONFIG_SYS_FLASH_READ2 0x0004 /* 2 is standard */
-
-#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
-
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_OFFSET 0x00010000 /* Offset of Environment Sector */
-#define CONFIG_ENV_SIZE 0x1000 /* Total Size of Environment Sector */
-
-#if 0
-#define CONFIG_ENV_SECT_SIZE 0x8000 /* see README - env sector total size */
-#else
-#define CONFIG_ENV_SECT_SIZE 0x10000 /* see README - env sector total size */
-#endif
-
-/*-----------------------------------------------------------------------
- * PCI stuff
- */
-#define CONFIG_PCI /* include pci support */
-#undef CONFIG_PCI_PNP
-
-
-#define CONFIG_TULIP
-
-#define CONFIG_SYS_ETH_DEV_FN 0x0000
-#define CONFIG_SYS_ETH_IOBASE 0x0fff0000
-#define CONFIG_SYS_PCI9054_DEV_FN 0x0800
-#define CONFIG_SYS_PCI9054_IOBASE 0x0eff0000
-
-/*
- * Init Memory Controller:
- *
- * BR0/1 and OR0/1 (FLASH)
- */
-
-#define FLASH_BASE0_PRELIM 0xFFE00000 /* FLASH bank #0 */
-
-#endif /* __CONFIG_H */
diff --git a/include/vxworks.h b/include/vxworks.h
index 917a9ff..736e3b5 100644
--- a/include/vxworks.h
+++ b/include/vxworks.h
@@ -39,8 +39,6 @@ int do_bootvx(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);
#ifndef CONFIG_SYS_VXWORKS_BOOT_DEVICE
#if defined(CONFIG_4xx)
#define CONFIG_SYS_VXWORKS_BOOT_DEVICE "emac(0,0)"
-#elif defined(CONFIG_IOP480)
-#define CONFIG_SYS_VXWORKS_BOOT_DEVICE "dc(0,0)"
#else
#define CONFIG_SYS_VXWORKS_BOOT_DEVICE "eth(0,0)"
#endif