summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorHeiko Schocher <hs@denx.de>2008-10-15 09:35:26 +0200
committerWolfgang Denk <wd@denx.de>2008-10-18 21:54:01 +0200
commit98aed379586a155292efbf3209356836584b601c (patch)
treeb6ed51c21c915d6c0315febb0bf6b787dcc38ed8
parent799b784aa00cb03a352847ab9f9acdde79b72d21 (diff)
downloadu-boot-imx-98aed379586a155292efbf3209356836584b601c.zip
u-boot-imx-98aed379586a155292efbf3209356836584b601c.tar.gz
u-boot-imx-98aed379586a155292efbf3209356836584b601c.tar.bz2
soft_i2c: prevent compiler warnings if driver does not use CPU Pins.
This patch fixes the following warnings, when using the soft_i2c driver using no CPU pins on MPC82xx or MPC8xx systems: soft_i2c.c: In function 'send_reset': soft_i2c.c:93: warning: unused variable 'immr' soft_i2c.c: In function 'send_start': soft_i2c.c:124: warning: unused variable 'immr' soft_i2c.c: In function 'send_stop': soft_i2c.c:146: warning: unused variable 'immr' soft_i2c.c: In function 'send_ack': soft_i2c.c:171: warning: unused variable 'immr' soft_i2c.c: In function 'write_byte': soft_i2c.c:196: warning: unused variable 'immr' soft_i2c.c: In function 'read_byte': soft_i2c.c:244: warning: unused variable 'immr' Signed-off-by: Heiko Schocher <hs@denx.de>
-rw-r--r--drivers/i2c/soft_i2c.c43
-rw-r--r--include/i2c.h9
2 files changed, 15 insertions, 37 deletions
diff --git a/drivers/i2c/soft_i2c.c b/drivers/i2c/soft_i2c.c
index 57736da..19c364b 100644
--- a/drivers/i2c/soft_i2c.c
+++ b/drivers/i2c/soft_i2c.c
@@ -82,7 +82,6 @@ static void send_ack (int);
static int write_byte (uchar byte);
static uchar read_byte (int);
-
/*-----------------------------------------------------------------------
* Send a reset sequence consisting of 9 clocks with the data signal high
* to clock any confused device back into an idle state. Also send a
@@ -90,12 +89,7 @@ static uchar read_byte (int);
*/
static void send_reset(void)
{
-#ifdef CONFIG_MPC8260
- volatile ioport_t *iop = ioport_addr((immap_t *)CFG_IMMR, I2C_PORT);
-#endif
-#ifdef CONFIG_8xx
- volatile immap_t *immr = (immap_t *)CFG_IMMR;
-#endif
+ I2C_SOFT_DECLARATIONS /* intentional without ';' */
int j;
I2C_SCL(1);
@@ -121,12 +115,7 @@ static void send_reset(void)
*/
static void send_start(void)
{
-#ifdef CONFIG_MPC8260
- volatile ioport_t *iop = ioport_addr((immap_t *)CFG_IMMR, I2C_PORT);
-#endif
-#ifdef CONFIG_8xx
- volatile immap_t *immr = (immap_t *)CFG_IMMR;
-#endif
+ I2C_SOFT_DECLARATIONS /* intentional without ';' */
I2C_DELAY;
I2C_SDA(1);
@@ -143,12 +132,7 @@ static void send_start(void)
*/
static void send_stop(void)
{
-#ifdef CONFIG_MPC8260
- volatile ioport_t *iop = ioport_addr((immap_t *)CFG_IMMR, I2C_PORT);
-#endif
-#ifdef CONFIG_8xx
- volatile immap_t *immr = (immap_t *)CFG_IMMR;
-#endif
+ I2C_SOFT_DECLARATIONS /* intentional without ';' */
I2C_SCL(0);
I2C_DELAY;
@@ -168,12 +152,7 @@ static void send_stop(void)
*/
static void send_ack(int ack)
{
-#ifdef CONFIG_MPC8260
- volatile ioport_t *iop = ioport_addr((immap_t *)CFG_IMMR, I2C_PORT);
-#endif
-#ifdef CONFIG_8xx
- volatile immap_t *immr = (immap_t *)CFG_IMMR;
-#endif
+ I2C_SOFT_DECLARATIONS /* intentional without ';' */
I2C_SCL(0);
I2C_DELAY;
@@ -193,12 +172,7 @@ static void send_ack(int ack)
*/
static int write_byte(uchar data)
{
-#ifdef CONFIG_MPC8260
- volatile ioport_t *iop = ioport_addr((immap_t *)CFG_IMMR, I2C_PORT);
-#endif
-#ifdef CONFIG_8xx
- volatile immap_t *immr = (immap_t *)CFG_IMMR;
-#endif
+ I2C_SOFT_DECLARATIONS /* intentional without ';' */
int j;
int nack;
@@ -273,12 +247,7 @@ int i2c_set_bus_speed(unsigned int speed)
*/
static uchar read_byte(int ack)
{
-#ifdef CONFIG_MPC8260
- volatile ioport_t *iop = ioport_addr((immap_t *)CFG_IMMR, I2C_PORT);
-#endif
-#ifdef CONFIG_8xx
- volatile immap_t *immr = (immap_t *)CFG_IMMR;
-#endif
+ I2C_SOFT_DECLARATIONS /* intentional without ';' */
int data;
int j;
diff --git a/include/i2c.h b/include/i2c.h
index a51c164..a6e797a 100644
--- a/include/i2c.h
+++ b/include/i2c.h
@@ -67,6 +67,15 @@
#define CFG_SPD_BUS_NUM 0
#endif
+#ifndef I2C_SOFT_DECLARATIONS
+# if defined(CONFIG_MPC8260)
+# define I2C_SOFT_DECLARATIONS volatile ioport_t *iop = ioport_addr((immap_t *)CFG_IMMR, I2C_PORT);
+# elif defined(CONFIG_8xx)
+# define I2C_SOFT_DECLARATIONS volatile immap_t *immr = (immap_t *)CFG_IMMR;
+# else
+# define I2C_SOFT_DECLARATIONS
+# endif
+#endif
/*
* Initialization, must be called once on start up, may be called
* repeatedly to change the speed and slave addresses.