omap3: replace all instances of gpmc config struct by one global

Signed-off-by: Matthias Ludwig <mludwig@ultratronik.de>
Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>

5 files changed, 35 insertions, 40 deletions

diff --git a/board/omap3/evm/evm.c b/board/omap3/evm/evm.c
index 71905f6..0718a08 100644
--- a/board/omap3/evm/evm.c
+++ b/board/omap3/evm/evm.c
@@ -93,17 +93,16 @@ void set_muxconf_regs(void)
 static void setup_net_chip(void)
 {
 	struct gpio *gpio3_base = (struct gpio *)OMAP34XX_GPIO3_BASE;
-	struct gpmc *gpmc = (struct gpmc *)GPMC_BASE;
 	struct ctrl *ctrl_base = (struct ctrl *)OMAP34XX_CTRL_BASE;
 
 	/* Configure GPMC registers */
-	writel(NET_GPMC_CONFIG1, &gpmc->cs[5].config1);
-	writel(NET_GPMC_CONFIG2, &gpmc->cs[5].config2);
-	writel(NET_GPMC_CONFIG3, &gpmc->cs[5].config3);
-	writel(NET_GPMC_CONFIG4, &gpmc->cs[5].config4);
-	writel(NET_GPMC_CONFIG5, &gpmc->cs[5].config5);
-	writel(NET_GPMC_CONFIG6, &gpmc->cs[5].config6);
-	writel(NET_GPMC_CONFIG7, &gpmc->cs[5].config7);
+	writel(NET_GPMC_CONFIG1, &gpmc_cfg->cs[5].config1);
+	writel(NET_GPMC_CONFIG2, &gpmc_cfg->cs[5].config2);
+	writel(NET_GPMC_CONFIG3, &gpmc_cfg->cs[5].config3);
+	writel(NET_GPMC_CONFIG4, &gpmc_cfg->cs[5].config4);
+	writel(NET_GPMC_CONFIG5, &gpmc_cfg->cs[5].config5);
+	writel(NET_GPMC_CONFIG6, &gpmc_cfg->cs[5].config6);
+	writel(NET_GPMC_CONFIG7, &gpmc_cfg->cs[5].config7);
 
 	/* Enable off mode for NWE in PADCONF_GPMC_NWE register */
 	writew(readw(&ctrl_base ->gpmc_nwe) | 0x0E00, &ctrl_base->gpmc_nwe);
diff --git a/board/omap3/zoom2/zoom2.c b/board/omap3/zoom2/zoom2.c
index d64730e..d9e2ae5 100644
--- a/board/omap3/zoom2/zoom2.c
+++ b/board/omap3/zoom2/zoom2.c
@@ -123,14 +123,13 @@ void zoom2_identify(void)
 int board_init (void)
 {
 	DECLARE_GLOBAL_DATA_PTR;
-	struct gpmc *gpmc = (struct gpmc *)GPMC_BASE;
 	u32 *gpmc_config;
 
 	gpmc_init ();		/* in SRAM or SDRAM, finish GPMC */
 
 	/* Configure console support on zoom2 */
 	gpmc_config = gpmc_serial_TL16CP754C;
-	enable_gpmc_cs_config(gpmc_config, &gpmc->cs[4],
+	enable_gpmc_cs_config(gpmc_config, &gpmc_cfg->cs[4],
 			SERIAL_TL16CP754C_BASE, GPMC_SIZE_16M);
 
 	/* board id for Linux */
diff --git a/cpu/arm_cortexa8/omap3/mem.c b/cpu/arm_cortexa8/omap3/mem.c
index aa15f94..079c848 100644
--- a/cpu/arm_cortexa8/omap3/mem.c
+++ b/cpu/arm_cortexa8/omap3/mem.c
@@ -41,6 +41,8 @@ unsigned int boot_flash_sec;
 unsigned int boot_flash_type;
 volatile unsigned int boot_flash_env_addr;
 
+struct gpmc *gpmc_cfg;
+
 #if defined(CONFIG_CMD_NAND)
 static u32 gpmc_m_nand[GPMC_MAX_REG] = {
 	M_NAND_GPMC_CONFIG1,
@@ -51,8 +53,6 @@ static u32 gpmc_m_nand[GPMC_MAX_REG] = {
 	M_NAND_GPMC_CONFIG6, 0
 };
 
-struct gpmc *gpmc_cfg;
-
 #if defined(CONFIG_ENV_IS_IN_NAND)
 #define GPMC_CS 0
 #else
@@ -219,7 +219,7 @@ void gpmc_init(void)
 {
 	/* putting a blanket check on GPMC based on ZeBu for now */
 	u32 *gpmc_config = NULL;
-	struct gpmc *gpmc_base = (struct gpmc *)GPMC_BASE;
+	gpmc_cfg = (struct gpmc *)GPMC_BASE;
 	u32 base = 0;
 	u32 size = 0;
 	u32 f_off = CONFIG_SYS_MONITOR_LEN;
@@ -227,27 +227,26 @@ void gpmc_init(void)
 	u32 config = 0;
 
 	/* global settings */
-	writel(0, &gpmc_base->irqenable); /* isr's sources masked */
-	writel(0, &gpmc_base->timeout_control);/* timeout disable */
+	writel(0, &gpmc_cfg->irqenable); /* isr's sources masked */
+	writel(0, &gpmc_cfg->timeout_control);/* timeout disable */
 
-	config = readl(&gpmc_base->config);
+	config = readl(&gpmc_cfg->config);
 	config &= (~0xf00);
-	writel(config, &gpmc_base->config);
+	writel(config, &gpmc_cfg->config);
 
 	/*
 	 * Disable the GPMC0 config set by ROM code
 	 * It conflicts with our MPDB (both at 0x08000000)
 	 */
-	writel(0, &gpmc_base->cs[0].config7);
+	writel(0, &gpmc_cfg->cs[0].config7);
 	sdelay(1000);
 
 #if defined(CONFIG_CMD_NAND)	/* CS 0 */
 	gpmc_config = gpmc_m_nand;
-	gpmc_cfg = gpmc_base;
 
 	base = PISMO1_NAND_BASE;
 	size = PISMO1_NAND_SIZE;
-	enable_gpmc_cs_config(gpmc_config, &gpmc_base->cs[0], base, size);
+	enable_gpmc_cs_config(gpmc_config, &gpmc_cfg->cs[0], base, size);
 #if defined(CONFIG_ENV_IS_IN_NAND)
 	f_off = SMNAND_ENV_OFFSET;
 	f_sec = SZ_128K;
@@ -263,7 +262,7 @@ void gpmc_init(void)
 	gpmc_config = gpmc_onenand;
 	base = PISMO1_ONEN_BASE;
 	size = PISMO1_ONEN_SIZE;
-	enable_gpmc_cs_config(gpmc_config, &gpmc_base->cs[0], base, size);
+	enable_gpmc_cs_config(gpmc_config, &gpmc_cfg->cs[0], base, size);
 #if defined(CONFIG_ENV_IS_IN_ONENAND)
 	f_off = ONENAND_ENV_OFFSET;
 	f_sec = SZ_128K;
diff --git a/cpu/arm_cortexa8/omap3/sys_info.c b/cpu/arm_cortexa8/omap3/sys_info.c
index e0e5153..765aaf2 100644
--- a/cpu/arm_cortexa8/omap3/sys_info.c
+++ b/cpu/arm_cortexa8/omap3/sys_info.c
@@ -32,7 +32,6 @@
 #include <i2c.h>
 
 extern omap3_sysinfo sysinfo;
-static struct gpmc *gpmc_base = (struct gpmc *)GPMC_BASE;
 static struct sdrc *sdrc_base = (struct sdrc *)OMAP34XX_SDRC_BASE;
 static struct ctrl *ctrl_base = (struct ctrl *)OMAP34XX_CTRL_BASE;
 static char *rev_s[CPU_3XX_MAX_REV] = {
@@ -160,7 +159,7 @@ u32 get_gpmc0_base(void)
 {
 	u32 b;
 
-	b = readl(&gpmc_base->cs[0].config7);
+	b = readl(&gpmc_cfg->cs[0].config7);
 	b &= 0x1F;		/* keep base [5:0] */
 	b = b << 24;		/* ret 0x0b000000 */
 	return b;
diff --git a/drivers/mtd/nand/omap_gpmc.c b/drivers/mtd/nand/omap_gpmc.c
index 89e8b1c..99b9cef 100644
--- a/drivers/mtd/nand/omap_gpmc.c
+++ b/drivers/mtd/nand/omap_gpmc.c
@@ -30,7 +30,6 @@
 #include <nand.h>
 
 static uint8_t cs;
-static struct gpmc *gpmc_base = (struct gpmc *)GPMC_BASE;
 static struct nand_ecclayout hw_nand_oob = GPMC_NAND_HW_ECC_LAYOUT;
 
 /*
@@ -48,13 +47,13 @@ static void omap_nand_hwcontrol(struct mtd_info *mtd, int32_t cmd,
 	 */
 	switch (ctrl) {
 	case NAND_CTRL_CHANGE | NAND_CTRL_CLE:
-		this->IO_ADDR_W = (void __iomem *)&gpmc_base->cs[cs].nand_cmd;
+		this->IO_ADDR_W = (void __iomem *)&gpmc_cfg->cs[cs].nand_cmd;
 		break;
 	case NAND_CTRL_CHANGE | NAND_CTRL_ALE:
-		this->IO_ADDR_W = (void __iomem *)&gpmc_base->cs[cs].nand_adr;
+		this->IO_ADDR_W = (void __iomem *)&gpmc_cfg->cs[cs].nand_adr;
 		break;
 	case NAND_CTRL_CHANGE | NAND_NCE:
-		this->IO_ADDR_W = (void __iomem *)&gpmc_base->cs[cs].nand_dat;
+		this->IO_ADDR_W = (void __iomem *)&gpmc_cfg->cs[cs].nand_dat;
 		break;
 	}
 
@@ -74,8 +73,8 @@ static void omap_hwecc_init(struct nand_chip *chip)
 	 * Init ECC Control Register
 	 * Clear all ECC | Enable Reg1
 	 */
-	writel(ECCCLEAR | ECCRESULTREG1, &gpmc_base->ecc_control);
-	writel(ECCSIZE1 | ECCSIZE0 | ECCSIZE0SEL, &gpmc_base->ecc_size_config);
+	writel(ECCCLEAR | ECCRESULTREG1, &gpmc_cfg->ecc_control);
+	writel(ECCSIZE1 | ECCSIZE0 | ECCSIZE0SEL, &gpmc_cfg->ecc_size_config);
 }
 
 /*
@@ -178,7 +177,7 @@ static int omap_calculate_ecc(struct mtd_info *mtd, const uint8_t *dat,
 	u_int32_t val;
 
 	/* Start Reading from HW ECC1_Result = 0x200 */
-	val = readl(&gpmc_base->ecc1_result);
+	val = readl(&gpmc_cfg->ecc1_result);
 
 	ecc_code[0] = val & 0xFF;
 	ecc_code[1] = (val >> 16) & 0xFF;
@@ -188,7 +187,7 @@ static int omap_calculate_ecc(struct mtd_info *mtd, const uint8_t *dat,
 	 * Stop reading anymore ECC vals and clear old results
 	 * enable will be called if more reads are required
 	 */
-	writel(0x000, &gpmc_base->ecc_config);
+	writel(0x000, &gpmc_cfg->ecc_config);
 
 	return 0;
 }
@@ -207,7 +206,7 @@ static void omap_enable_hwecc(struct mtd_info *mtd, int32_t mode)
 	case NAND_ECC_READ:
 	case NAND_ECC_WRITE:
 		/* Clear the ecc result registers, select ecc reg as 1 */
-		writel(ECCCLEAR | ECCRESULTREG1, &gpmc_base->ecc_control);
+		writel(ECCCLEAR | ECCRESULTREG1, &gpmc_cfg->ecc_control);
 
 		/*
 		 * Size 0 = 0xFF, Size1 is 0xFF - both are 512 bytes
@@ -215,9 +214,9 @@ static void omap_enable_hwecc(struct mtd_info *mtd, int32_t mode)
 		 * we just have a single ECC engine for all CS
 		 */
 		writel(ECCSIZE1 | ECCSIZE0 | ECCSIZE0SEL,
-			&gpmc_base->ecc_size_config);
+			&gpmc_cfg->ecc_size_config);
 		val = (dev_width << 7) | (cs << 1) | (0x1);
-		writel(val, &gpmc_base->ecc_config);
+		writel(val, &gpmc_cfg->ecc_config);
 		break;
 	default:
 		printf("Error: Unrecognized Mode[%d]!\n", mode);
@@ -311,7 +310,7 @@ int board_nand_init(struct nand_chip *nand)
 	 */
 	while (cs < GPMC_MAX_CS) {
 		/* Check if NAND type is set */
-		if ((readl(&gpmc_base->cs[cs].config1) & 0xC00) == 0x800) {
+		if ((readl(&gpmc_cfg->cs[cs].config1) & 0xC00) == 0x800) {
 			/* Found it!! */
 			break;
 		}
@@ -323,18 +322,18 @@ int board_nand_init(struct nand_chip *nand)
 		return -ENODEV;
 	}
 
-	gpmc_config = readl(&gpmc_base->config);
+	gpmc_config = readl(&gpmc_cfg->config);
 	/* Disable Write protect */
 	gpmc_config |= 0x10;
-	writel(gpmc_config, &gpmc_base->config);
+	writel(gpmc_config, &gpmc_cfg->config);
 
-	nand->IO_ADDR_R = (void __iomem *)&gpmc_base->cs[cs].nand_dat;
-	nand->IO_ADDR_W = (void __iomem *)&gpmc_base->cs[cs].nand_cmd;
+	nand->IO_ADDR_R = (void __iomem *)&gpmc_cfg->cs[cs].nand_dat;
+	nand->IO_ADDR_W = (void __iomem *)&gpmc_cfg->cs[cs].nand_cmd;
 
 	nand->cmd_ctrl = omap_nand_hwcontrol;
 	nand->options = NAND_NO_PADDING | NAND_CACHEPRG | NAND_NO_AUTOINCR;
 	/* If we are 16 bit dev, our gpmc config tells us that */
-	if ((readl(&gpmc_base->cs[cs].config1) & 0x3000) == 0x1000)
+	if ((readl(&gpmc_cfg->cs[cs].config1) & 0x3000) == 0x1000)
 		nand->options |= NAND_BUSWIDTH_16;
 
 	nand->chip_delay = 100;