summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorTom Rini <trini@ti.com>2014-06-05 11:15:30 -0400
committerTom Rini <trini@ti.com>2014-06-06 17:46:16 -0400
commit83bad1026b9e3a4f6b7783cc1cbb434c1bbd3fa2 (patch)
treeb22c6a40173ffaaea12053ed06940731c573ef80
parent86db550b3864bcb3c9567fbdb67b49a244f5263e (diff)
downloadu-boot-imx-83bad1026b9e3a4f6b7783cc1cbb434c1bbd3fa2.zip
u-boot-imx-83bad1026b9e3a4f6b7783cc1cbb434c1bbd3fa2.tar.gz
u-boot-imx-83bad1026b9e3a4f6b7783cc1cbb434c1bbd3fa2.tar.bz2
arm:am43xx: Add TPS65218 support to scale voltages up
This family is supported by the TPS65218 PMIC. Implement a scale_vcores to set the MPU and CORE voltage correctly to the max frequency that is supported (and what we will be scaling them to in setup_dplls()). Signed-off-by: Tom Rini <trini@ti.com>
-rw-r--r--board/ti/am43xx/board.c48
-rw-r--r--include/configs/am43xx_evm.h4
2 files changed, 45 insertions, 7 deletions
diff --git a/board/ti/am43xx/board.c b/board/ti/am43xx/board.c
index b635d69..71af1ae 100644
--- a/board/ti/am43xx/board.c
+++ b/board/ti/am43xx/board.c
@@ -19,6 +19,7 @@
#include <asm/arch/gpio.h>
#include <asm/emif.h>
#include "board.h"
+#include <power/tps65218.h>
#include <miiphy.h>
#include <cpsw.h>
@@ -254,13 +255,6 @@ void emif_get_ext_phy_ctrl_const_regs(const u32 **regs, u32 *size)
const struct dpll_params *get_dpll_ddr_params(void)
{
- struct am43xx_board_id header;
-
- enable_i2c0_pin_mux();
- i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE);
- if (read_eeprom(&header) < 0)
- puts("Could not get board ID.\n");
-
if (board_is_eposevm())
return &epos_evm_dpll_ddr;
else if (board_is_gpevm())
@@ -338,6 +332,46 @@ const struct dpll_params *get_dpll_per_params(void)
return &dpll_per[ind];
}
+void scale_vcores(void)
+{
+ const struct dpll_params *mpu_params;
+ int mpu_vdd;
+ struct am43xx_board_id header;
+
+ enable_i2c0_pin_mux();
+ i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE);
+ if (read_eeprom(&header) < 0)
+ puts("Could not get board ID.\n");
+
+ /* Get the frequency */
+ mpu_params = get_dpll_mpu_params();
+
+ if (i2c_probe(TPS65218_CHIP_PM))
+ return;
+
+ if (mpu_params->m == 1000) {
+ mpu_vdd = TPS65218_DCDC_VOLT_SEL_1330MV;
+ } else if (mpu_params->m == 600) {
+ mpu_vdd = TPS65218_DCDC_VOLT_SEL_1100MV;
+ } else {
+ puts("Unknown MPU clock, not scaling\n");
+ return;
+ }
+
+ /* Set DCDC1 (CORE) voltage to 1.1V */
+ if (tps65218_voltage_update(TPS65218_DCDC1,
+ TPS65218_DCDC_VOLT_SEL_1100MV)) {
+ puts("tps65218_voltage_update failure\n");
+ return;
+ }
+
+ /* Set DCDC2 (MPU) voltage */
+ if (tps65218_voltage_update(TPS65218_DCDC2, mpu_vdd)) {
+ puts("tps65218_voltage_update failure\n");
+ return;
+ }
+}
+
void set_uart_mux_conf(void)
{
enable_uart0_pin_mux();
diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h
index 8359621..823cba6 100644
--- a/include/configs/am43xx_evm.h
+++ b/include/configs/am43xx_evm.h
@@ -32,11 +32,15 @@
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
#define CONFIG_SYS_I2C_MULTI_EEPROMS
+/* Power */
+#define CONFIG_POWER_TPS65218
+
/* SPL defines. */
#define CONFIG_SPL_TEXT_BASE 0x40300350
#define CONFIG_SPL_MAX_SIZE (220 << 10) /* 220KB */
#define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + \
(128 << 20))
+#define CONFIG_SPL_POWER_SUPPORT
#define CONFIG_SPL_YMODEM_SUPPORT
/* Enabling L2 Cache */