doc: cleanup - move board READMEs into respective board directories

Also drop a few files referring to no longer / not yet supported
boards.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Prafulla Wadaskar <prafulla@marvell.com>
Cc: Stefan Roese <sr@denx.de>
Cc: Kim Phillips <kim.phillips@freescale.com>
Cc: Andy Fleming <afleming@gmail.com>
Cc: Jason Jin <jason.jin@freescale.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
Acked-by: Stefano Babic <sbabic@denx.de>
Acked-by: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>

83 files changed, 565 insertions, 626 deletions

diff --git a/doc/README.ag101 b/board/AndesTech/adp-ag101/README
index 46fc637..46fc637 100644
--- a/doc/README.ag101
+++ b/board/AndesTech/adp-ag101/README
diff --git a/doc/README.db64360 b/board/Marvell/db64360/README
index ebac4ce..ebac4ce 100644
--- a/doc/README.db64360
+++ b/board/Marvell/db64360/README
diff --git a/doc/README.db64460 b/board/Marvell/db64460/README
index c6e01fe..c6e01fe 100644
--- a/doc/README.db64460
+++ b/board/Marvell/db64460/README
diff --git a/doc/README.RPXClassic b/board/RPXClassic/README
index e03f670..e03f670 100644
--- a/doc/README.RPXClassic
+++ b/board/RPXClassic/README
diff --git a/doc/README.RPXlite b/board/RPXlite/README
index 3ca6711..3ca6711 100644
--- a/doc/README.RPXlite
+++ b/board/RPXlite/README
diff --git a/doc/README.PlanetCore b/board/RPXlite/README.PlanetCore
index b73c5f5..b73c5f5 100644
--- a/doc/README.PlanetCore
+++ b/board/RPXlite/README.PlanetCore
diff --git a/doc/README.alaska8220 b/board/alaska/README
index 3345073..3345073 100644
--- a/doc/README.alaska8220
+++ b/board/alaska/README
diff --git a/doc/README.bamboo b/board/amcc/bamboo/README
index e139c6d..e139c6d 100644
--- a/doc/README.bamboo
+++ b/board/amcc/bamboo/README
diff --git a/doc/README.ebony b/board/amcc/ebony/README
index 4df00b3..4df00b3 100644
--- a/doc/README.ebony
+++ b/board/amcc/ebony/README
diff --git a/doc/README.ocotea b/board/amcc/ocotea/README.ocotea
index be79b03..be79b03 100644
--- a/doc/README.ocotea
+++ b/board/amcc/ocotea/README.ocotea
diff --git a/doc/README.ocotea-PIBS-to-U-Boot b/board/amcc/ocotea/README.ocotea-PIBS-to-U-Boot
index 25dd2a2..25dd2a2 100644
--- a/doc/README.ocotea-PIBS-to-U-Boot
+++ b/board/amcc/ocotea/README.ocotea-PIBS-to-U-Boot
diff --git a/doc/README-integrator b/board/armltd/integrator/README
index 5a0e934..5a0e934 100644
--- a/doc/README-integrator
+++ b/board/armltd/integrator/README
diff --git a/doc/README.cmi b/board/cmi/README
index 0edd50a..0edd50a 100644
--- a/doc/README.cmi
+++ b/board/cmi/README
diff --git a/doc/README.COBRA5272 b/board/cobra5272/README
index ae0f148..ae0f148 100644
--- a/doc/README.COBRA5272
+++ b/board/cobra5272/README
diff --git a/doc/README.hawkboard b/board/davinci/da8xxevm/README.hawkboard
index d6ae02e..d6ae02e 100644
--- a/doc/README.hawkboard
+++ b/board/davinci/da8xxevm/README.hawkboard
diff --git a/doc/README.dnp5370 b/board/dnp5370/README
index 0172698..0172698 100644
--- a/doc/README.dnp5370
+++ b/board/dnp5370/README
diff --git a/doc/README.evb64260 b/board/evb64260/README
index 74211de..74211de 100644
--- a/doc/README.evb64260
+++ b/board/evb64260/README
diff --git a/doc/README.EVB-64260-750CX b/board/evb64260/README.EVB-64260-750CX
index 5ea38ea..5ea38ea 100644
--- a/doc/README.EVB-64260-750CX
+++ b/board/evb64260/README.EVB-64260-750CX
diff --git a/doc/README.fads b/board/fads/README
index bae9652..bae9652 100644
--- a/doc/README.fads
+++ b/board/fads/README
diff --git a/doc/README.m52277evb b/board/freescale/m52277evb/README
index b6e955b..b6e955b 100644
--- a/doc/README.m52277evb
+++ b/board/freescale/m52277evb/README
diff --git a/doc/README.m5253evbe b/board/freescale/m5253evbe/README
index f51609f..f51609f 100644
--- a/doc/README.m5253evbe
+++ b/board/freescale/m5253evbe/README
diff --git a/doc/README.m53017evb b/board/freescale/m53017evb/README
index 64a3d42..64a3d42 100644
--- a/doc/README.m53017evb
+++ b/board/freescale/m53017evb/README
diff --git a/doc/README.m5373evb b/board/freescale/m5373evb/README
index 419d4d6..419d4d6 100644
--- a/doc/README.m5373evb
+++ b/board/freescale/m5373evb/README
diff --git a/doc/README.m54455evb b/board/freescale/m54455evb/README
index 2bc6ce4..2bc6ce4 100644
--- a/doc/README.m54455evb
+++ b/board/freescale/m54455evb/README
diff --git a/doc/README.m5475evb b/board/freescale/m547xevb/README
index d3aec20..d3aec20 100644
--- a/doc/README.m5475evb
+++ b/board/freescale/m547xevb/README
diff --git a/doc/README.mpc7448hpc2 b/board/freescale/mpc7448hpc2/README
index cbb043e..cbb043e 100644
--- a/doc/README.mpc7448hpc2
+++ b/board/freescale/mpc7448hpc2/README
diff --git a/doc/README.mpc8313erdb b/board/freescale/mpc8313erdb/README
index be7ef32..be7ef32 100644
--- a/doc/README.mpc8313erdb
+++ b/board/freescale/mpc8313erdb/README
diff --git a/doc/README.mpc8315erdb b/board/freescale/mpc8315erdb/README
index b32132d..b32132d 100644
--- a/doc/README.mpc8315erdb
+++ b/board/freescale/mpc8315erdb/README
diff --git a/doc/README.mpc8323erdb b/board/freescale/mpc8323erdb/README
index 6f89829..6f89829 100644
--- a/doc/README.mpc8323erdb
+++ b/board/freescale/mpc8323erdb/README
diff --git a/doc/README.mpc832xemds b/board/freescale/mpc832xemds/README
index 4142aa9..4142aa9 100644
--- a/doc/README.mpc832xemds
+++ b/board/freescale/mpc832xemds/README
diff --git a/doc/README.mpc8349itx b/board/freescale/mpc8349itx/README
index 48bbd50..48bbd50 100644
--- a/doc/README.mpc8349itx
+++ b/board/freescale/mpc8349itx/README
diff --git a/doc/README.mpc8360emds b/board/freescale/mpc8360emds/README
index 6afa753..6afa753 100644
--- a/doc/README.mpc8360emds
+++ b/board/freescale/mpc8360emds/README
diff --git a/doc/README.mpc837xemds b/board/freescale/mpc837xemds/README
index faf21c9..faf21c9 100644
--- a/doc/README.mpc837xemds
+++ b/board/freescale/mpc837xemds/README
diff --git a/doc/README.mpc837xerdb b/board/freescale/mpc837xerdb/README
index cfb6efa..cfb6efa 100644
--- a/doc/README.mpc837xerdb
+++ b/board/freescale/mpc837xerdb/README
diff --git a/doc/README.mpc8536ds b/board/freescale/mpc8536ds/README
index 2a38bd6..2a38bd6 100644
--- a/doc/README.mpc8536ds
+++ b/board/freescale/mpc8536ds/README
diff --git a/doc/README.mpc8544ds b/board/freescale/mpc8544ds/README
index b49c3c0..b49c3c0 100644
--- a/doc/README.mpc8544ds
+++ b/board/freescale/mpc8544ds/README
diff --git a/doc/README.mpc8569mds b/board/freescale/mpc8569mds/README
index 3d12a96..3d12a96 100644
--- a/doc/README.mpc8569mds
+++ b/board/freescale/mpc8569mds/README
diff --git a/doc/README.mpc8572ds b/board/freescale/mpc8572ds/README
index 57fd2ad..57fd2ad 100644
--- a/doc/README.mpc8572ds
+++ b/board/freescale/mpc8572ds/README
diff --git a/doc/README.mpc8610hpcd b/board/freescale/mpc8610hpcd/README
index 31a9af3..31a9af3 100644
--- a/doc/README.mpc8610hpcd
+++ b/board/freescale/mpc8610hpcd/README
diff --git a/doc/README.mpc8641hpcn b/board/freescale/mpc8641hpcn/README
index d8fe0a4..d8fe0a4 100644
--- a/doc/README.mpc8641hpcn
+++ b/board/freescale/mpc8641hpcn/README
diff --git a/doc/README.mx35pdk b/board/freescale/mx35pdk/README
index 3d69ed5..3d69ed5 100644
--- a/doc/README.mx35pdk
+++ b/board/freescale/mx35pdk/README
diff --git a/doc/README.mx6qsabrelite b/board/freescale/mx6qsabrelite/README
index 6f2f534..6f2f534 100644
--- a/doc/README.mx6qsabrelite
+++ b/board/freescale/mx6qsabrelite/README
diff --git a/doc/README.p1022ds b/board/freescale/p1022ds/README
index 04d9197..04d9197 100644
--- a/doc/README.p1022ds
+++ b/board/freescale/p1022ds/README
diff --git a/doc/README.p1023rds b/board/freescale/p1023rds/README
index 685f5da..685f5da 100644
--- a/doc/README.p1023rds
+++ b/board/freescale/p1023rds/README
diff --git a/doc/README.p2020rdb b/board/freescale/p1_p2_rdb/README
index cb664a5..cb664a5 100644
--- a/doc/README.p2020rdb
+++ b/board/freescale/p1_p2_rdb/README
diff --git a/doc/README.p1_p2_rdb_pc b/board/freescale/p1_p2_rdb_pc/README
index 4437731..4437731 100644
--- a/doc/README.p1_p2_rdb_pc
+++ b/board/freescale/p1_p2_rdb_pc/README
diff --git a/doc/README.p2041rdb b/board/freescale/p2041rdb/README
index 292d0d3..292d0d3 100644
--- a/doc/README.p2041rdb
+++ b/board/freescale/p2041rdb/README
diff --git a/doc/README.p3060qds b/board/freescale/p3060qds/README
index ec62798..ec62798 100644
--- a/doc/README.p3060qds
+++ b/board/freescale/p3060qds/README
diff --git a/doc/README.IceCube b/board/icecube/README
index 5252bc9..5252bc9 100644
--- a/doc/README.IceCube
+++ b/board/icecube/README
diff --git a/doc/README.Lite5200B_low_power b/board/icecube/README.Lite5200B_low_power
index 5b04fbb..5b04fbb 100644
--- a/doc/README.Lite5200B_low_power
+++ b/board/icecube/README.Lite5200B_low_power
diff --git a/doc/README.INCA-IP b/board/incaip/README
index 1329152..1329152 100644
--- a/doc/README.INCA-IP
+++ b/board/incaip/README
diff --git a/doc/README.IPHASE4539 b/board/iphase4539/README
index c5146d9..c5146d9 100644
--- a/doc/README.IPHASE4539
+++ b/board/iphase4539/README
diff --git a/doc/README.kmeter1 b/board/keymile/km83xx/README.kmeter1
index 7f4fc99..7f4fc99 100644
--- a/doc/README.kmeter1
+++ b/board/keymile/km83xx/README.kmeter1
diff --git a/doc/README.korat b/board/korat/README
index e059f78..e059f78 100644
--- a/doc/README.korat
+++ b/board/korat/README
diff --git a/doc/README.mergerbox b/board/matrix_vision/mergerbox/README
index 1994b65..1994b65 100644
--- a/doc/README.mergerbox
+++ b/board/matrix_vision/mergerbox/README
diff --git a/doc/README.mvbc_p b/board/matrix_vision/mvbc_p/README.mvbc_p
index a691137..a691137 100644
--- a/doc/README.mvbc_p
+++ b/board/matrix_vision/mvbc_p/README.mvbc_p
diff --git a/doc/README.mvblm7 b/board/matrix_vision/mvblm7/README.mvblm7
index a0686f7..a0686f7 100644
--- a/doc/README.mvblm7
+++ b/board/matrix_vision/mvblm7/README.mvblm7
diff --git a/doc/README.mvsmr b/board/matrix_vision/mvsmr/README.mvsmr
index 8e34cb7..8e34cb7 100644
--- a/doc/README.mvsmr
+++ b/board/matrix_vision/mvsmr/README.mvsmr
diff --git a/doc/README.MBX b/board/mbx8xx/README
index c889fe9..c889fe9 100644
--- a/doc/README.MBX
+++ b/board/mbx8xx/README
diff --git a/doc/README.PIP405 b/board/mpl/pip405/README
index 012db1c..012db1c 100644
--- a/doc/README.PIP405
+++ b/board/mpl/pip405/README
diff --git a/doc/README.phytec.pcm030 b/board/phytec/pcm030/README
index 05faab6..05faab6 100644
--- a/doc/README.phytec.pcm030
+++ b/board/phytec/pcm030/README
diff --git a/board/qemu-mips/README b/board/qemu-mips/README
index 565241b..9fd97e1 100644
--- a/board/qemu-mips/README
+++ b/board/qemu-mips/README
@@ -13,3 +13,170 @@ Derived from au1x00 with a lot of things cut out.
 Supports emulated flash (patch Jean-Christophe PLAGNIOL-VILLARD) with
 recent qemu versions. When using emulated flash, launch with
 -pflash <filename> and erase mips_bios.bin.
+
+
+
+Notes for the Qemu MIPS port
+----------------------------
+
+I) Example usage:
+
+# ln -s u-boot.bin mips_bios.bin
+start it:
+qemu-system-mips -L . /dev/null -nographic
+
+or
+
+if you use a qemu version after commit 4224
+
+create image:
+# dd of=flash bs=1k count=4k if=/dev/zero
+# dd of=flash bs=1k conv=notrunc if=u-boot.bin
+start it:
+# qemu-system-mips -M mips -pflash flash -monitor null -nographic
+
+2) Download kernel + initrd
+
+On ftp://ftp.denx.de/pub/contrib/Jean-Christophe_Plagniol-Villard/qemu_mips/
+you can downland
+
+#config to build the kernel
+qemu_mips_defconfig
+#patch to fix mips interrupt init on 2.6.24.y kernel
+qemu_mips_kernel.patch
+initrd.gz
+vmlinux
+vmlinux.bin
+System.map
+
+4) Generate uImage
+
+# tools/mkimage -A mips -O linux -T kernel -C gzip -a 0x80010000 -e 0x80245650 -n "Linux 2.6.24.y" -d vmlinux.bin.gz uImage
+
+5) Copy uImage to Flash
+# dd if=uImage bs=1k conv=notrunc seek=224 of=flash
+
+6) Generate Ide Disk
+
+# dd of=ide bs=1k cout=100k if=/dev/zero
+
+# sfdisk -C 261 -d ide
+# partition table of ide
+unit: sectors
+
+     ide1 : start=       63, size=    32067, Id=83
+     ide2 : start=    32130, size=    32130, Id=83
+     ide3 : start=    64260, size=  4128705, Id=83
+     ide4 : start=        0, size=        0, Id= 0
+
+7) Copy to ide
+
+# dd if=uImage bs=512 conv=notrunc seek=63 of=ide
+
+8) Generate ext2 on part 2 on Copy uImage and initrd.gz
+
+# Attached as loop device ide offset = 32130 * 512
+# losetup -o 16450560 -f ide
+# Format as ext2 ( arg2 : nb blocks)
+# mke2fs /dev/loop0 16065
+# losetup -d /dev/loop0
+# Mount and copy uImage and initrd.gz to it
+# mount -o loop,offset=16450560 -t ext2 ide /mnt
+# mkdir /mnt/boot
+# cp {initrd.gz,uImage} /mnt/boot/
+# Umount it
+# umount /mnt
+
+9) Set Environment
+
+setenv rd_start 0x80800000
+setenv rd_size 2663940
+setenv kernel BFC38000
+setenv oad_addr 80500000
+setenv load_addr2 80F00000
+setenv kernel_flash BFC38000
+setenv load_addr_hello 80200000
+setenv bootargs 'root=/dev/ram0 init=/bin/sh'
+setenv load_rd_ext2 'ide res; ext2load ide 0:2 ${rd_start} /boot/initrd.gz'
+setenv load_rd_tftp 'tftp ${rd_start} /initrd.gz'
+setenv load_kernel_hda 'ide res; diskboot ${load_addr} 0:2'
+setenv load_kernel_ext2 'ide res; ext2load ide 0:2 ${load_addr} /boot/uImage'
+setenv load_kernel_tftp 'tftp ${load_addr} /qemu_mips/uImage'
+setenv boot_ext2_ext2 'run load_rd_ext2; run load_kernel_ext2; run addmisc; bootm ${load_addr}'
+setenv boot_ext2_flash 'run load_rd_ext2; run addmisc; bootm ${kernel_flash}'
+setenv boot_ext2_hda 'run load_rd_ext2; run load_kernel_hda; run addmisc; bootm ${load_addr}'
+setenv boot_ext2_tftp 'run load_rd_ext2; run load_kernel_tftp; run addmisc; bootm ${load_addr}'
+setenv boot_tftp_hda 'run load_rd_tftp; run load_kernel_hda; run addmisc; bootm ${load_addr}'
+setenv boot_tftp_ext2 'run load_rd_tftp; run load_kernel_ext2; run addmisc; bootm ${load_addr}'
+setenv boot_tftp_flash 'run load_rd_tftp; run addmisc; bootm ${kernel_flash}'
+setenv boot_tftp_tftp 'run load_rd_tftp; run load_kernel_tftp; run addmisc; bootm ${load_addr}'
+setenv load_hello_tftp 'tftp ${load_addr_hello} /examples/hello_world.bin'
+setenv go_tftp 'run load_hello_tftp; go ${load_addr_hello}'
+setenv addmisc 'setenv bootargs ${bootargs} console=ttyS0,${baudrate} rd_start=${rd_start} rd_size=${rd_size} ethaddr=${ethaddr}'
+setenv bootcmd 'run boot_tftp_flash'
+
+10) Now you can boot from flash, ide, ide+ext2 and tfp
+
+# qemu-system-mips -M mips -pflash flash -monitor null -nographic -net nic -net user -tftp `pwd` -hda ide
+
+II) How to debug U-Boot
+
+In order to debug U-Boot you need to start qemu with gdb server support (-s)
+and waiting the connection to start the CPU (-S)
+
+# qemu-system-mips -S -s -M mips -pflash flash -monitor null -nographic -net nic -net user -tftp `pwd` -hda ide
+
+in an other console you start gdb
+
+1) Debugging of U-Boot Before Relocation
+
+Before relocation, the addresses in the ELF file can be used without any problems
+by connecting to the gdb server localhost:1234
+
+# mipsel-unknown-linux-gnu-gdb u-boot
+GNU gdb 6.6
+Copyright (C) 2006 Free Software Foundation, Inc.
+GDB is free software, covered by the GNU General Public License, and you are
+welcome to change it and/or distribute copies of it under certain conditions.
+Type "show copying" to see the conditions.
+There is absolutely no warranty for GDB.  Type "show warranty" for details.
+This GDB was configured as "--host=i486-linux-gnu --target=mipsel-unknown-linux-gnu"...
+(gdb)  target remote localhost:1234
+Remote debugging using localhost:1234
+_start () at start.S:64
+64		RVECENT(reset,0)	/* U-boot entry point */
+Current language:  auto; currently asm
+(gdb)  b board.c:289
+Breakpoint 1 at 0xbfc00cc8: file board.c, line 289.
+(gdb) c
+Continuing.
+
+Breakpoint 1, board_init_f (bootflag=<value optimized out>) at board.c:290
+290		relocate_code (addr_sp, id, addr);
+Current language:  auto; currently c
+(gdb) p/x addr
+$1 = 0x87fa0000
+
+2) Debugging of U-Boot After Relocation
+
+For debugging U-Boot after relocation we need to know the address to which
+U-Boot relocates itself to 0x87fa0000 by default.
+And replace the symbol table to this offset.
+
+(gdb) symbol-file
+Discard symbol table from `/private/u-boot-arm/u-boot'? (y or n) y
+Error in re-setting breakpoint 1:
+No symbol table is loaded.  Use the "file" command.
+No symbol file now.
+(gdb) add-symbol-file u-boot 0x87fa0000
+add symbol table from file "u-boot" at
+	.text_addr = 0x87fa0000
+(y or n) y
+Reading symbols from /private/u-boot-arm/u-boot...done.
+Breakpoint 1 at 0x87fa0cc8: file board.c, line 289.
+(gdb) c
+Continuing.
+
+Program received signal SIGINT, Interrupt.
+0xffffffff87fa0de4 in udelay (usec=<value optimized out>) at time.c:78
+78		while ((tmo - read_c0_count()) < 0x7fffffff)
diff --git a/doc/README.sh7757lcr b/board/renesas/sh7757lcr/README.sh7757lcr
index 3e9c1c1..3e9c1c1 100644
--- a/doc/README.sh7757lcr
+++ b/board/renesas/sh7757lcr/README.sh7757lcr
diff --git a/doc/README.sh7785lcr b/board/renesas/sh7785lcr/README.sh7785lcr
index 56455fc..56455fc 100644
--- a/doc/README.sh7785lcr
+++ b/board/renesas/sh7785lcr/README.sh7785lcr
diff --git a/doc/README.sandbox b/board/sandbox/sandbox/README.sandbox
index 04692b3..04692b3 100644
--- a/doc/README.sandbox
+++ b/board/sandbox/sandbox/README.sandbox
diff --git a/board/sandpoint/README b/board/sandpoint/README
index 9e48168..a2e0831 100644
--- a/board/sandpoint/README
+++ b/board/sandpoint/README
@@ -13,3 +13,401 @@ seem to maintain it any more. I can be reached by mail as
 tkoeller@gmx.net.
 
 Thomas Koeller
+
+
+
+
+The port was tested on a Sandpoint 8240 X3 board, with U-Boot
+installed in the flash memory of the CPU card. Please use the
+following DIP switch settings:
+
+Motherboard:
+
+SW1.1: on	SW1.2: on	SW1.3: on	SW1.4: on
+SW1.5: on	SW1.6: on	SW1.7: on	SW1.8: on
+
+SW2.1: on	SW2.2: on	SW2.3: on	SW2.4: on
+SW2.5: on	SW2.6: on	SW2.7: on	SW2.8: on
+
+
+CPU Card:
+
+SW2.1: OFF	SW2.2: OFF	SW2.3: on	SW2.4: on
+SW2.5: OFF	SW2.6: OFF	SW2.7: OFF	SW2.8: OFF
+
+SW3.1: OFF	SW3.2: on	SW3.3: OFF	SW3.4: OFF
+SW3.5: on	SW3.6: OFF	SW3.7: OFF	SW3.8: on
+
+
+The followind detailed description of installation and initial steps
+with U-Boot and QNX was provided by Jim Sandoz <sandoz@lucent.com>:
+
+
+Directions for installing U-Boot on Sandpoint+Unity8240
+using the Abatron BDI2000 BDM/JTAG debugger ...
+
+Background and Reference info:
+http://u-boot.sourceforge.net/
+http://www.abatron.ch/
+http://www.abatron.ch/BDI/bdihw.html
+http://www.abatron.ch/DataSheets/BDI2000.pdf
+http://www.abatron.ch/Manuals/ManGdbCOP-2000C.pdf
+http://e-www.motorola.com/collateral/SPX3UM.pdf
+http://e-www.motorola.com/collateral/UNITYX4CONFIG.pdf
+
+
+Connection Diagram:
+					    ===========
+ ===                     =====             |-----      |
+|   | <---------------> |     |            |     |     |
+|PC |       rs232       | BDI |=============[]   |     |
+|   |                   |2000 |  BDM probe |     |     |
+|   | <---------------> |     |            |-----      |
+ ===       ethernet      =====             |           |
+					   |           |
+					    ===========
+					 Sandpoint X3 with
+					  Unity 8240 proc
+
+
+PART 1)
+  DIP Switch Settings:
+
+Sandpoint X3 8240 processor board DIP switch settings, with
+U-Boot to be installed in the flash memory of the CPU card:
+
+Motorola Sandpoint X3 Motherboard:
+SW1.1: on	SW1.2: on	SW1.3: on	SW1.4: on
+SW1.5: on	SW1.6: on	SW1.7: on	SW1.8: on
+SW2.1: on	SW2.2: on	SW2.3: on	SW2.4: on
+SW2.5: on	SW2.6: on	SW2.7: on	SW2.8: on
+
+Motorola Unity 8240 CPU Card:
+SW2.1: OFF	SW2.2: OFF	SW2.3: on	SW2.4: on
+SW2.5: OFF	SW2.6: OFF	SW2.7: OFF	SW2.8: OFF
+SW3.1: OFF	SW3.2: on	SW3.3: OFF	SW3.4: OFF
+SW3.5: on	SW3.6: OFF	SW3.7: OFF	SW3.8: on
+
+
+PART 2)
+  Connect the BDI2000 Cable to the Sandpoint/Unity 8240:
+
+BDM Pin 1 on the Unity 8240 processor board is towards the
+PCI PMC connectors, or away from the socketed SDRAM, i.e.:
+
+  ====================
+  | ---------------- |
+  | |    SDRAM     | |
+  | |              | |
+  | ---------------- |
+  | |~|              |
+  | |B|       ++++++ |
+  | |D|       + uP + |
+  | |M|       +8240+ |
+  |  ~ 1      ++++++ |
+  |                  |
+  |                  |
+  |                  |
+  | PMC conn ======  |
+  |   =====  ======  |
+  |                  |
+  ====================
+
+
+PART 3)
+  Setting up the BDI2000, and preparing for TCP/IP network comms:
+
+Connect the BDI2000 to the PC using the supplied serial cable.
+Download the BDI2000 software and install it using setup.exe.
+
+[Note: of course you  can  also  use  the  Linux  command  line  tool
+"bdisetup"  to  configure  your BDI2000 - the sources are included on
+the floppy disk that comes with your BDI2000. Just in case you  don't
+have any Windows PC's - like me :-)   -- wd ]
+
+Power up the BDI2000; then follow directions to assign the IP
+address and related network information.  Note that U-Boot
+will be loaded to the Sandpoint via tftp.  You need to either
+use the Abatron-provided tftp application or provide a tftp
+server (e.g. Linux/Solaris/*BSD) somewhere on your network.
+Once the IP address etc are assigned via the RS232 port,
+further communication with the BDI2000 will happen via the
+ethernet connection.
+
+PART 4)
+  Making a TCP/IP network connection to the Abatron BDI2000:
+
+Telnet to the Abatron BDI2000.  Assuming that all of the
+networking info was loaded via RS232 correctly, you will see
+the following (scrolling):
+
+- TARGET: waiting for target Vcc
+- TARGET: waiting for target Vcc
+
+
+PART 5)
+  Power up the target Sandpoint:
+If the BDM connections are correct, the following will now appear:
+
+- TARGET: waiting for target Vcc
+- TARGET: waiting for target Vcc
+- TARGET: processing power-up delay
+- TARGET: processing user reset request
+- BDI asserts HRESET
+- Reset JTAG controller passed
+- Bypass check: 0x55 => 0xAA
+- Bypass check: 0x55 => 0xAA
+- JTAG exists check passed
+- Target PVR is 0x00810101
+- COP status is 0x01
+- Check running state passed
+- BDI scans COP freeze command
+- BDI removes HRESET
+- COP status is 0x05
+- Check stopped state passed
+- Check LSRL length passed
+- BDI sets breakpoint at 0xFFF00100
+- BDI resumes program execution
+- Waiting for target stop passed
+- TARGET: Target PVR is 0x00810101
+- TARGET: reseting target passed
+- TARGET: processing target startup ....
+- TARGET: processing target startup passed
+BDI>
+
+
+PART 6)
+  Erase the current contents of the flash memory:
+
+BDI>era 0xFFF00000
+    Erasing flash at 0xfff00000
+    Erasing flash passed
+BDI>era 0xFFF04000
+    Erasing flash at 0xfff04000
+    Erasing flash passed
+BDI>era 0xFFF06000
+    Erasing flash at 0xfff06000
+    Erasing flash passed
+BDI>era 0xFFF08000
+    Erasing flash at 0xfff08000
+    Erasing flash passed
+BDI>era 0xFFF10000
+    Erasing flash at 0xfff10000
+    Erasing flash passed
+BDI>era 0xFFF20000
+    Erasing flash at 0xfff20000
+    Erasing flash passed
+
+
+PART 7)
+  Program the flash memory with the U-Boot image:
+
+BDI>prog 0xFFF00000 u-boot.bin bin
+    Programming u-boot.bin , please wait ....
+    Programming flash passed
+
+
+PART 8)
+  Connect PC to Sandpoint:
+Using a crossover serial cable, attach the PC serial port to the
+Sandpoint's COM1.  Set communications parameters to 8N1 / 9600 baud.
+
+
+PART 9)
+  Reset the Unity and begin U-Boot execution:
+
+BDI>reset
+- TARGET: processing user reset request
+- TARGET: Target PVR is 0x00810101
+- TARGET: reseting target passed
+- TARGET: processing target init list ....
+- TARGET: processing target init list passed
+
+BDI>go
+
+Now see output from U-Boot running, sent via serial port:
+
+U-Boot 1.1.4 (Jan 23 2002 - 18:29:19)
+
+CPU:   MPC8240 Revision 1.1 at 264 MHz: 16 kB I-Cache 16 kB D-Cache
+Board: Sandpoint 8240 Unity
+DRAM:  64 MB
+FLASH:  2 MB
+PCI:    scanning bus0 ...
+  bus dev fn venID devID class  rev MBAR0    MBAR1    IPIN ILINE
+  00  00  00 1057  0003  060000 13  00000008 00000000 01   00
+  00  0b  00 10ad  0565  060100 10  00000000 00000000 00   00
+  00  0f  00 8086  1229  020000 08  80000000 80000001 01   00
+In:    serial
+Out:   serial
+Err:   serial
+=>
+
+
+PART 10)
+  Set and save any required environmental variables, examples of some:
+
+=> setenv ethaddr 00:03:47:97:D0:79
+=> setenv bootfile your_qnx_image_here
+=> setenv hostname sandpointX
+=> setenv netmask 255.255.255.0
+=> setenv ipaddr 192.168.0.11
+=> setenv serverip 192.168.0.10
+=> setenv gatewayip=192.168.0.1
+=> saveenv
+Saving Environment to Flash...
+Un-Protected 1 sectors
+Erasing Flash...
+ done
+Erased 1 sectors
+Writing to Flash... done
+Protected 1 sectors
+=>
+
+**** Example environment: ****
+
+=> printenv
+baudrate=9600
+bootfile=telemetry
+hostname=sp1
+ethaddr=00:03:47:97:E4:6B
+load=tftp 100000 u-boot.bin
+update=protect off all;era FFF00000 FFF3FFFF;cp.b 100000 FFF00000 ${filesize};saveenv
+filesize=1f304
+gatewayip=145.17.228.1
+netmask=255.255.255.0
+ipaddr=145.17.228.42
+serverip=145.17.242.46
+stdin=serial
+stdout=serial
+stderr=serial
+
+Environment size: 332/8188 bytes
+=>
+
+here's some text useful stuff for cut-n-paste:
+setenv hostname sandpoint1
+setenv netmask 255.255.255.0
+setenv ipaddr 145.17.228.81
+setenv serverip 145.17.242.46
+setenv gatewayip 145.17.228.1
+saveenv
+
+PART 11)
+  Test U-Boot by tftp'ing new U-Boot, overwriting current:
+
+=> protect off all
+Un-Protect Flash Bank # 1
+=> tftp 100000 u-boot.bin
+eth: Intel i82559 PCI EtherExpressPro @0x80000000(bus=0, device=15, func=0)
+ARP broadcast 1
+TFTP from server 145.17.242.46; our IP address is 145.17.228.42; sending through
+ gateway 145.17.228.1
+Filename 'u-boot.bin'.
+Load address: 0x100000
+Loading: #########################
+done
+Bytes transferred = 127628 (1f28c hex)
+=> era all
+Erase Flash Bank # 1
+ done
+Erase Flash Bank # 2 - missing
+=> cp.b 0x100000 FFF00000 1f28c
+Copy to Flash... done
+=> saveenv
+Saving Environment to Flash...
+Un-Protected 1 sectors
+Erasing Flash...
+ done
+Erased 1 sectors
+Writing to Flash... done
+Protected 1 sectors
+=> reset
+
+You can put these commands into some environment variables;
+
+=> setenv load tftp 100000 u-boot.bin
+=> setenv update protect off all\;era FFF00000 FFF3FFFF\;cp.b 100000 FFF00000 \${filesize}\;saveenv
+=> saveenv
+
+Then you just have to type "run load" then "run update"
+
+=> run load
+eth: Intel i82559 PCI EtherExpressPro @0x80000000(bus=0, device=15, func=0)
+ARP broadcast 1
+TFTP from server 145.17.242.46; our IP address is 145.17.228.42; sending through
+ gateway 145.17.228.1
+Filename 'u-boot.bin'.
+Load address: 0x100000
+Loading: #########################
+done
+Bytes transferred = 127748 (1f304 hex)
+=> run update
+Un-Protect Flash Bank # 1
+Un-Protect Flash Bank # 2
+Erase Flash from 0xfff00000 to 0xfff3ffff
+ done
+Erased 7 sectors
+Copy to Flash... done
+Saving Environment to Flash...
+Un-Protected 1 sectors
+Erasing Flash...
+ done
+Erased 1 sectors
+Writing to Flash... done
+Protected 1 sectors
+=>
+
+
+PART 12)
+  Load OS image (ELF format) via U-Boot using tftp
+
+
+=> tftp 800000 sandpoint-simple.elf
+eth: Intel i82559 PCI EtherExpressPro @0x80000000(bus=0, device=15, func=0)
+ARP broadcast 1
+TFTP from server 145.17.242.46; our IP address is 145.17.228.42; sending through
+ gateway 145.17.228.1
+Filename 'sandpoint-simple.elf'.
+Load address: 0x800000
+Loading: #################################################################
+	 #################################################################
+	 #################################################################
+	 ########################
+done
+Bytes transferred = 1120284 (11181c hex)
+==>
+
+PART 13)
+  Begin OS image execution: (note that unless you have the
+serial parameters of your OS image set to 9600 (i.e. same as
+the U-Boot binary) you will get garbage here until you change
+the serial communications speed.
+
+=> bootelf 800000
+Loading  @ 0x001f0100 (1120028 bytes)
+## Starting application at 0x001f1d28 ...
+Replace init_hwinfo() with a board specific version
+
+Loading QNX6....
+
+Header size=0x0000009c, Total Size=0x000005c0, #Cpu=1, Type=1
+<...loader and kernel messages snipped...>
+
+Welcome to Neutrino on the Sandpoint
+#
+
+
+other information:
+
+CVS Retrieval Notes:
+
+U-Boot's SourceForge CVS repository can be checked out
+through anonymous (pserver) CVS with the following
+instruction set. The module you wish to check out must
+be specified as the modulename. When prompted for a
+password for anonymous, simply press the Enter key.
+
+cvs -d:pserver:anonymous@cvs.u-boot.sourceforge.net:/cvsroot/u-boot login
+
+cvs -z6 -d:pserver:anonymous@cvs.u-boot.sourceforge.net:/cvsroot/u-boot co -P u-boot
diff --git a/doc/README.sbc8349 b/board/sbc8349/README
index 2c35919..2c35919 100644
--- a/doc/README.sbc8349
+++ b/board/sbc8349/README
diff --git a/doc/README.sbc8548 b/board/sbc8548/README
index feac5e3..feac5e3 100644
--- a/doc/README.sbc8548
+++ b/board/sbc8548/README
diff --git a/doc/README.SBC8560 b/board/sbc8560/README
index c4b6422..c4b6422 100644
--- a/doc/README.SBC8560
+++ b/board/sbc8560/README
diff --git a/doc/README.sbc8641d b/board/sbc8641d/README
index a051466..a051466 100644
--- a/doc/README.sbc8641d
+++ b/board/sbc8641d/README
diff --git a/doc/README.simpc8313 b/board/sheldon/simpc8313/README.simpc8313
index b362c6a..b362c6a 100644
--- a/doc/README.simpc8313
+++ b/board/sheldon/simpc8313/README.simpc8313
diff --git a/doc/README.nhk8815 b/board/st/nhk8815/README.nhk8815
index 9008e39..9008e39 100644
--- a/doc/README.nhk8815
+++ b/board/st/nhk8815/README.nhk8815
diff --git a/doc/README.stxxtc b/board/stx/stxxtc/README.stxxtc
index 7d9d4d3..7d9d4d3 100644
--- a/doc/README.stxxtc
+++ b/board/stx/stxxtc/README.stxxtc
diff --git a/doc/README.omap730p2 b/board/ti/omap730p2/README.omap730p2
index 7c70916..7c70916 100644
--- a/doc/README.omap730p2
+++ b/board/ti/omap730p2/README.omap730p2
diff --git a/doc/README.timll b/board/timll/devkit8000/README
index 609bf51..609bf51 100644
--- a/doc/README.timll
+++ b/board/timll/devkit8000/README
diff --git a/doc/README.TQM8260 b/board/tqc/tqm8260/README
index 93b5506..93b5506 100644
--- a/doc/README.TQM8260
+++ b/board/tqc/tqm8260/README
diff --git a/doc/README.xpedite1k b/board/xes/xpedite1000/README
index 1da8b80..1da8b80 100644
--- a/doc/README.xpedite1k
+++ b/board/xes/xpedite1000/README
diff --git a/doc/README.zeus b/board/zeus/README
index 1848d8c..1848d8c 100644
--- a/doc/README.zeus
+++ b/board/zeus/README
diff --git a/doc/README.OXC b/doc/README.OXC
deleted file mode 100644
index c5db5f8..0000000
--- a/doc/README.OXC
+++ /dev/null
@@ -1,24 +0,0 @@
-This document contains different information about the port
-of U-Boot for the OXC board designed by Lucent Technologies,
-Inc.
-
-1. Showing activity
-
-U-Boot for the OXC board can show its current status using
-the Active LED. This feature is configured by the following
-options:
-
-CONFIG_SHOW_ACTIVITY
-
-  When this option is on, the Active LED is blinking fast
-when U-Boot runs in the idle loop (i.e. waits for user
-commands from serial console) and blinking slow when it
-downloads an image over network. When U-Boot loads an image
-over serial line the Active LED does not blink and its state
-is random (i.e. either constant on or constant off).
-
-CONFIG_SHOW_BOOT_PROGRESS
-
-  When this option is on, U-Boot switches the Active LED
-off before booting an image and switches it on if booting
-failed due to some reasons.
diff --git a/doc/README.Sandpoint8240 b/doc/README.Sandpoint8240
deleted file mode 100644
index fa846dc..0000000
--- a/doc/README.Sandpoint8240
+++ /dev/null
@@ -1,394 +0,0 @@
-The port was tested on a Sandpoint 8240 X3 board, with U-Boot
-installed in the flash memory of the CPU card. Please use the
-following DIP switch settings:
-
-Motherboard:
-
-SW1.1: on	SW1.2: on	SW1.3: on	SW1.4: on
-SW1.5: on	SW1.6: on	SW1.7: on	SW1.8: on
-
-SW2.1: on	SW2.2: on	SW2.3: on	SW2.4: on
-SW2.5: on	SW2.6: on	SW2.7: on	SW2.8: on
-
-
-CPU Card:
-
-SW2.1: OFF	SW2.2: OFF	SW2.3: on	SW2.4: on
-SW2.5: OFF	SW2.6: OFF	SW2.7: OFF	SW2.8: OFF
-
-SW3.1: OFF	SW3.2: on	SW3.3: OFF	SW3.4: OFF
-SW3.5: on	SW3.6: OFF	SW3.7: OFF	SW3.8: on
-
-
-The followind detailed description of installation and initial steps
-with U-Boot and QNX was provided by Jim Sandoz <sandoz@lucent.com>:
-
-
-Directions for installing U-Boot on Sandpoint+Unity8240
-using the Abatron BDI2000 BDM/JTAG debugger ...
-
-Background and Reference info:
-http://u-boot.sourceforge.net/
-http://www.abatron.ch/
-http://www.abatron.ch/BDI/bdihw.html
-http://www.abatron.ch/DataSheets/BDI2000.pdf
-http://www.abatron.ch/Manuals/ManGdbCOP-2000C.pdf
-http://e-www.motorola.com/collateral/SPX3UM.pdf
-http://e-www.motorola.com/collateral/UNITYX4CONFIG.pdf
-
-
-Connection Diagram:
-					    ===========
- ===                     =====             |-----      |
-|   | <---------------> |     |            |     |     |
-|PC |       rs232       | BDI |=============[]   |     |
-|   |                   |2000 |  BDM probe |     |     |
-|   | <---------------> |     |            |-----      |
- ===       ethernet      =====             |           |
-					   |           |
-					    ===========
-					 Sandpoint X3 with
-					  Unity 8240 proc
-
-
-PART 1)
-  DIP Switch Settings:
-
-Sandpoint X3 8240 processor board DIP switch settings, with
-U-Boot to be installed in the flash memory of the CPU card:
-
-Motorola Sandpoint X3 Motherboard:
-SW1.1: on	SW1.2: on	SW1.3: on	SW1.4: on
-SW1.5: on	SW1.6: on	SW1.7: on	SW1.8: on
-SW2.1: on	SW2.2: on	SW2.3: on	SW2.4: on
-SW2.5: on	SW2.6: on	SW2.7: on	SW2.8: on
-
-Motorola Unity 8240 CPU Card:
-SW2.1: OFF	SW2.2: OFF	SW2.3: on	SW2.4: on
-SW2.5: OFF	SW2.6: OFF	SW2.7: OFF	SW2.8: OFF
-SW3.1: OFF	SW3.2: on	SW3.3: OFF	SW3.4: OFF
-SW3.5: on	SW3.6: OFF	SW3.7: OFF	SW3.8: on
-
-
-PART 2)
-  Connect the BDI2000 Cable to the Sandpoint/Unity 8240:
-
-BDM Pin 1 on the Unity 8240 processor board is towards the
-PCI PMC connectors, or away from the socketed SDRAM, i.e.:
-
-  ====================
-  | ---------------- |
-  | |    SDRAM     | |
-  | |              | |
-  | ---------------- |
-  | |~|              |
-  | |B|       ++++++ |
-  | |D|       + uP + |
-  | |M|       +8240+ |
-  |  ~ 1      ++++++ |
-  |                  |
-  |                  |
-  |                  |
-  | PMC conn ======  |
-  |   =====  ======  |
-  |                  |
-  ====================
-
-
-PART 3)
-  Setting up the BDI2000, and preparing for TCP/IP network comms:
-
-Connect the BDI2000 to the PC using the supplied serial cable.
-Download the BDI2000 software and install it using setup.exe.
-
-[Note: of course you  can  also  use  the  Linux  command  line  tool
-"bdisetup"  to  configure  your BDI2000 - the sources are included on
-the floppy disk that comes with your BDI2000. Just in case you  don't
-have any Windows PC's - like me :-)   -- wd ]
-
-Power up the BDI2000; then follow directions to assign the IP
-address and related network information.  Note that U-Boot
-will be loaded to the Sandpoint via tftp.  You need to either
-use the Abatron-provided tftp application or provide a tftp
-server (e.g. Linux/Solaris/*BSD) somewhere on your network.
-Once the IP address etc are assigned via the RS232 port,
-further communication with the BDI2000 will happen via the
-ethernet connection.
-
-PART 4)
-  Making a TCP/IP network connection to the Abatron BDI2000:
-
-Telnet to the Abatron BDI2000.  Assuming that all of the
-networking info was loaded via RS232 correctly, you will see
-the following (scrolling):
-
-- TARGET: waiting for target Vcc
-- TARGET: waiting for target Vcc
-
-
-PART 5)
-  Power up the target Sandpoint:
-If the BDM connections are correct, the following will now appear:
-
-- TARGET: waiting for target Vcc
-- TARGET: waiting for target Vcc
-- TARGET: processing power-up delay
-- TARGET: processing user reset request
-- BDI asserts HRESET
-- Reset JTAG controller passed
-- Bypass check: 0x55 => 0xAA
-- Bypass check: 0x55 => 0xAA
-- JTAG exists check passed
-- Target PVR is 0x00810101
-- COP status is 0x01
-- Check running state passed
-- BDI scans COP freeze command
-- BDI removes HRESET
-- COP status is 0x05
-- Check stopped state passed
-- Check LSRL length passed
-- BDI sets breakpoint at 0xFFF00100
-- BDI resumes program execution
-- Waiting for target stop passed
-- TARGET: Target PVR is 0x00810101
-- TARGET: reseting target passed
-- TARGET: processing target startup ....
-- TARGET: processing target startup passed
-BDI>
-
-
-PART 6)
-  Erase the current contents of the flash memory:
-
-BDI>era 0xFFF00000
-    Erasing flash at 0xfff00000
-    Erasing flash passed
-BDI>era 0xFFF04000
-    Erasing flash at 0xfff04000
-    Erasing flash passed
-BDI>era 0xFFF06000
-    Erasing flash at 0xfff06000
-    Erasing flash passed
-BDI>era 0xFFF08000
-    Erasing flash at 0xfff08000
-    Erasing flash passed
-BDI>era 0xFFF10000
-    Erasing flash at 0xfff10000
-    Erasing flash passed
-BDI>era 0xFFF20000
-    Erasing flash at 0xfff20000
-    Erasing flash passed
-
-
-PART 7)
-  Program the flash memory with the U-Boot image:
-
-BDI>prog 0xFFF00000 u-boot.bin bin
-    Programming u-boot.bin , please wait ....
-    Programming flash passed
-
-
-PART 8)
-  Connect PC to Sandpoint:
-Using a crossover serial cable, attach the PC serial port to the
-Sandpoint's COM1.  Set communications parameters to 8N1 / 9600 baud.
-
-
-PART 9)
-  Reset the Unity and begin U-Boot execution:
-
-BDI>reset
-- TARGET: processing user reset request
-- TARGET: Target PVR is 0x00810101
-- TARGET: reseting target passed
-- TARGET: processing target init list ....
-- TARGET: processing target init list passed
-
-BDI>go
-
-Now see output from U-Boot running, sent via serial port:
-
-U-Boot 1.1.4 (Jan 23 2002 - 18:29:19)
-
-CPU:   MPC8240 Revision 1.1 at 264 MHz: 16 kB I-Cache 16 kB D-Cache
-Board: Sandpoint 8240 Unity
-DRAM:  64 MB
-FLASH:  2 MB
-PCI:    scanning bus0 ...
-  bus dev fn venID devID class  rev MBAR0    MBAR1    IPIN ILINE
-  00  00  00 1057  0003  060000 13  00000008 00000000 01   00
-  00  0b  00 10ad  0565  060100 10  00000000 00000000 00   00
-  00  0f  00 8086  1229  020000 08  80000000 80000001 01   00
-In:    serial
-Out:   serial
-Err:   serial
-=>
-
-
-PART 10)
-  Set and save any required environmental variables, examples of some:
-
-=> setenv ethaddr 00:03:47:97:D0:79
-=> setenv bootfile your_qnx_image_here
-=> setenv hostname sandpointX
-=> setenv netmask 255.255.255.0
-=> setenv ipaddr 192.168.0.11
-=> setenv serverip 192.168.0.10
-=> setenv gatewayip=192.168.0.1
-=> saveenv
-Saving Environment to Flash...
-Un-Protected 1 sectors
-Erasing Flash...
- done
-Erased 1 sectors
-Writing to Flash... done
-Protected 1 sectors
-=>
-
-**** Example environment: ****
-
-=> printenv
-baudrate=9600
-bootfile=telemetry
-hostname=sp1
-ethaddr=00:03:47:97:E4:6B
-load=tftp 100000 u-boot.bin
-update=protect off all;era FFF00000 FFF3FFFF;cp.b 100000 FFF00000 ${filesize};saveenv
-filesize=1f304
-gatewayip=145.17.228.1
-netmask=255.255.255.0
-ipaddr=145.17.228.42
-serverip=145.17.242.46
-stdin=serial
-stdout=serial
-stderr=serial
-
-Environment size: 332/8188 bytes
-=>
-
-here's some text useful stuff for cut-n-paste:
-setenv hostname sandpoint1
-setenv netmask 255.255.255.0
-setenv ipaddr 145.17.228.81
-setenv serverip 145.17.242.46
-setenv gatewayip 145.17.228.1
-saveenv
-
-PART 11)
-  Test U-Boot by tftp'ing new U-Boot, overwriting current:
-
-=> protect off all
-Un-Protect Flash Bank # 1
-=> tftp 100000 u-boot.bin
-eth: Intel i82559 PCI EtherExpressPro @0x80000000(bus=0, device=15, func=0)
-ARP broadcast 1
-TFTP from server 145.17.242.46; our IP address is 145.17.228.42; sending through
- gateway 145.17.228.1
-Filename 'u-boot.bin'.
-Load address: 0x100000
-Loading: #########################
-done
-Bytes transferred = 127628 (1f28c hex)
-=> era all
-Erase Flash Bank # 1
- done
-Erase Flash Bank # 2 - missing
-=> cp.b 0x100000 FFF00000 1f28c
-Copy to Flash... done
-=> saveenv
-Saving Environment to Flash...
-Un-Protected 1 sectors
-Erasing Flash...
- done
-Erased 1 sectors
-Writing to Flash... done
-Protected 1 sectors
-=> reset
-
-You can put these commands into some environment variables;
-
-=> setenv load tftp 100000 u-boot.bin
-=> setenv update protect off all\;era FFF00000 FFF3FFFF\;cp.b 100000 FFF00000 \${filesize}\;saveenv
-=> saveenv
-
-Then you just have to type "run load" then "run update"
-
-=> run load
-eth: Intel i82559 PCI EtherExpressPro @0x80000000(bus=0, device=15, func=0)
-ARP broadcast 1
-TFTP from server 145.17.242.46; our IP address is 145.17.228.42; sending through
- gateway 145.17.228.1
-Filename 'u-boot.bin'.
-Load address: 0x100000
-Loading: #########################
-done
-Bytes transferred = 127748 (1f304 hex)
-=> run update
-Un-Protect Flash Bank # 1
-Un-Protect Flash Bank # 2
-Erase Flash from 0xfff00000 to 0xfff3ffff
- done
-Erased 7 sectors
-Copy to Flash... done
-Saving Environment to Flash...
-Un-Protected 1 sectors
-Erasing Flash...
- done
-Erased 1 sectors
-Writing to Flash... done
-Protected 1 sectors
-=>
-
-
-PART 12)
-  Load OS image (ELF format) via U-Boot using tftp
-
-
-=> tftp 800000 sandpoint-simple.elf
-eth: Intel i82559 PCI EtherExpressPro @0x80000000(bus=0, device=15, func=0)
-ARP broadcast 1
-TFTP from server 145.17.242.46; our IP address is 145.17.228.42; sending through
- gateway 145.17.228.1
-Filename 'sandpoint-simple.elf'.
-Load address: 0x800000
-Loading: #################################################################
-	 #################################################################
-	 #################################################################
-	 ########################
-done
-Bytes transferred = 1120284 (11181c hex)
-==>
-
-PART 13)
-  Begin OS image execution: (note that unless you have the
-serial parameters of your OS image set to 9600 (i.e. same as
-the U-Boot binary) you will get garbage here until you change
-the serial communications speed.
-
-=> bootelf 800000
-Loading  @ 0x001f0100 (1120028 bytes)
-## Starting application at 0x001f1d28 ...
-Replace init_hwinfo() with a board specific version
-
-Loading QNX6....
-
-Header size=0x0000009c, Total Size=0x000005c0, #Cpu=1, Type=1
-<...loader and kernel messages snipped...>
-
-Welcome to Neutrino on the Sandpoint
-#
-
-
-other information:
-
-CVS Retrieval Notes:
-
-U-Boot's SourceForge CVS repository can be checked out
-through anonymous (pserver) CVS with the following
-instruction set. The module you wish to check out must
-be specified as the modulename. When prompted for a
-password for anonymous, simply press the Enter key.
-
-cvs -d:pserver:anonymous@cvs.u-boot.sourceforge.net:/cvsroot/u-boot login
-
-cvs -z6 -d:pserver:anonymous@cvs.u-boot.sourceforge.net:/cvsroot/u-boot co -P u-boot
diff --git a/doc/README.amigaone b/doc/README.amigaone
deleted file mode 100644
index 9975977..0000000
--- a/doc/README.amigaone
+++ /dev/null
@@ -1,12 +0,0 @@
-AmigaOne U-Boot and the SciTech emulator
-
-The directory board/MAI/bios_emulator contains the source code
-of the SciTech x86 emulator. This emulator is normally available
-under a BSD license. However, SciTech kindly gave us permission
-to use their emulator in PPCBoot for the AmigaOne. It's available
-in this form only under GPL.
-
-Thanks to Kendall Bennett and the rest of the team at SciTech.
-See http://www.scitechsoft.com for their web site
-
-The GPL license can be found at http://www.gnu.org/licenses/gpl.html
diff --git a/doc/README.p4080ds b/doc/README.p4080ds
deleted file mode 100644
index 3ed59a8..0000000
--- a/doc/README.p4080ds
+++ /dev/null
@@ -1,32 +0,0 @@
-Overview
---------
-The P4080DS is a Freescale reference board that hosts the eight-core P4080 SOC.
-
-SerDes hwconfig configuration
------------------------------
-The P4080 RCW includes three sets of bits the specify which SerDes lanes
-should be powered down: SRDS_LPD_B1 (for bank one), SRDS_LPD_B2 (for bank two),
-and SRDS_LPD_B3 (for bank three).  Each of these contains four bits, one for
-each lane in the bank.  SerDes Erratum SERDES8 requires that SRDS_LPD_B2 and
-SRDS_LPD_B3 be set to 0b1111.  This forces banks two and three to be powered
-down at reset.
-
-To re-enable these banks in U-Boot, two hwconfig are available:
-"fsl_srds_lpd_b2" and "fsl_srds_lpd_b3".  The value passed via fsl_srds_lpd_b2
-is written into SRDS_LPD_B2, and the value passed via fsl_srds_lpd_b3 is into
-SRDS_LPD_B3.  Each bit represents one of each bank, and a value of '1'
-indicates that the lane should be powered down.
-
-For example, to indicate that both SerDes banks 2 and 3 are powered down, add
-the following to hwconfig:
-
-	serdes:fsl_srds_lpd_b2=0xf,fsl_srds_lpd_b3=0xf
-
-The "0xf" is a mask that corresponds to the 4 lanes A-D. The most significant
-bit corresponds to lane A.  To indicate that just lane A of bank 3 is to be
-powered down, use:
-
-	serdes:fsl_srds_lpd_b3=8
-
-These options should be specified only if U-Boot does not automatically power
-on the correct lanes.
diff --git a/doc/README.qemu_mips b/doc/README.qemu_mips
deleted file mode 100644
index e6a3855..0000000
--- a/doc/README.qemu_mips
+++ /dev/null
@@ -1,164 +0,0 @@
-
-Notes for the Qemu MIPS port
-
-I) Example usage:
-
-# ln -s u-boot.bin mips_bios.bin
-start it:
-qemu-system-mips -L . /dev/null -nographic
-
-or
-
-if you use a qemu version after commit 4224
-
-create image:
-# dd of=flash bs=1k count=4k if=/dev/zero
-# dd of=flash bs=1k conv=notrunc if=u-boot.bin
-start it:
-# qemu-system-mips -M mips -pflash flash -monitor null -nographic
-
-2) Download kernel + initrd
-
-On ftp://ftp.denx.de/pub/contrib/Jean-Christophe_Plagniol-Villard/qemu_mips/
-you can downland
-
-#config to build the kernel
-qemu_mips_defconfig
-#patch to fix mips interrupt init on 2.6.24.y kernel
-qemu_mips_kernel.patch
-initrd.gz
-vmlinux
-vmlinux.bin
-System.map
-
-4) Generate uImage
-
-# tools/mkimage -A mips -O linux -T kernel -C gzip -a 0x80010000 -e 0x80245650 -n "Linux 2.6.24.y" -d vmlinux.bin.gz uImage
-
-5) Copy uImage to Flash
-# dd if=uImage bs=1k conv=notrunc seek=224 of=flash
-
-6) Generate Ide Disk
-
-# dd of=ide bs=1k cout=100k if=/dev/zero
-
-# sfdisk -C 261 -d ide
-# partition table of ide
-unit: sectors
-
-     ide1 : start=       63, size=    32067, Id=83
-     ide2 : start=    32130, size=    32130, Id=83
-     ide3 : start=    64260, size=  4128705, Id=83
-     ide4 : start=        0, size=        0, Id= 0
-
-7) Copy to ide
-
-# dd if=uImage bs=512 conv=notrunc seek=63 of=ide
-
-8) Generate ext2 on part 2 on Copy uImage and initrd.gz
-
-# Attached as loop device ide offset = 32130 * 512
-# losetup -o 16450560 -f ide
-# Format as ext2 ( arg2 : nb blocks)
-# mke2fs /dev/loop0 16065
-# losetup -d /dev/loop0
-# Mount and copy uImage and initrd.gz to it
-# mount -o loop,offset=16450560 -t ext2 ide /mnt
-# mkdir /mnt/boot
-# cp {initrd.gz,uImage} /mnt/boot/
-# Umount it
-# umount /mnt
-
-9) Set Environment
-
-setenv rd_start 0x80800000
-setenv rd_size 2663940
-setenv kernel BFC38000
-setenv oad_addr 80500000
-setenv load_addr2 80F00000
-setenv kernel_flash BFC38000
-setenv load_addr_hello 80200000
-setenv bootargs 'root=/dev/ram0 init=/bin/sh'
-setenv load_rd_ext2 'ide res; ext2load ide 0:2 ${rd_start} /boot/initrd.gz'
-setenv load_rd_tftp 'tftp ${rd_start} /initrd.gz'
-setenv load_kernel_hda 'ide res; diskboot ${load_addr} 0:2'
-setenv load_kernel_ext2 'ide res; ext2load ide 0:2 ${load_addr} /boot/uImage'
-setenv load_kernel_tftp 'tftp ${load_addr} /qemu_mips/uImage'
-setenv boot_ext2_ext2 'run load_rd_ext2; run load_kernel_ext2; run addmisc; bootm ${load_addr}'
-setenv boot_ext2_flash 'run load_rd_ext2; run addmisc; bootm ${kernel_flash}'
-setenv boot_ext2_hda 'run load_rd_ext2; run load_kernel_hda; run addmisc; bootm ${load_addr}'
-setenv boot_ext2_tftp 'run load_rd_ext2; run load_kernel_tftp; run addmisc; bootm ${load_addr}'
-setenv boot_tftp_hda 'run load_rd_tftp; run load_kernel_hda; run addmisc; bootm ${load_addr}'
-setenv boot_tftp_ext2 'run load_rd_tftp; run load_kernel_ext2; run addmisc; bootm ${load_addr}'
-setenv boot_tftp_flash 'run load_rd_tftp; run addmisc; bootm ${kernel_flash}'
-setenv boot_tftp_tftp 'run load_rd_tftp; run load_kernel_tftp; run addmisc; bootm ${load_addr}'
-setenv load_hello_tftp 'tftp ${load_addr_hello} /examples/hello_world.bin'
-setenv go_tftp 'run load_hello_tftp; go ${load_addr_hello}'
-setenv addmisc 'setenv bootargs ${bootargs} console=ttyS0,${baudrate} rd_start=${rd_start} rd_size=${rd_size} ethaddr=${ethaddr}'
-setenv bootcmd 'run boot_tftp_flash'
-
-10) Now you can boot from flash, ide, ide+ext2 and tfp
-
-# qemu-system-mips -M mips -pflash flash -monitor null -nographic -net nic -net user -tftp `pwd` -hda ide
-
-II) How to debug U-Boot
-
-In order to debug U-Boot you need to start qemu with gdb server support (-s)
-and waiting the connection to start the CPU (-S)
-
-# qemu-system-mips -S -s -M mips -pflash flash -monitor null -nographic -net nic -net user -tftp `pwd` -hda ide
-
-in an other console you start gdb
-
-1) Debugging of U-Boot Before Relocation
-
-Before relocation, the addresses in the ELF file can be used without any problems
-by connecting to the gdb server localhost:1234
-
-# mipsel-unknown-linux-gnu-gdb u-boot
-GNU gdb 6.6
-Copyright (C) 2006 Free Software Foundation, Inc.
-GDB is free software, covered by the GNU General Public License, and you are
-welcome to change it and/or distribute copies of it under certain conditions.
-Type "show copying" to see the conditions.
-There is absolutely no warranty for GDB.  Type "show warranty" for details.
-This GDB was configured as "--host=i486-linux-gnu --target=mipsel-unknown-linux-gnu"...
-(gdb)  target remote localhost:1234
-Remote debugging using localhost:1234
-_start () at start.S:64
-64		RVECENT(reset,0)	/* U-boot entry point */
-Current language:  auto; currently asm
-(gdb)  b board.c:289
-Breakpoint 1 at 0xbfc00cc8: file board.c, line 289.
-(gdb) c
-Continuing.
-
-Breakpoint 1, board_init_f (bootflag=<value optimized out>) at board.c:290
-290		relocate_code (addr_sp, id, addr);
-Current language:  auto; currently c
-(gdb) p/x addr
-$1 = 0x87fa0000
-
-2) Debugging of U-Boot After Relocation
-
-For debugging U-Boot after relocation we need to know the address to which
-U-Boot relocates itself to 0x87fa0000 by default.
-And replace the symbol table to this offset.
-
-(gdb) symbol-file
-Discard symbol table from `/private/u-boot-arm/u-boot'? (y or n) y
-Error in re-setting breakpoint 1:
-No symbol table is loaded.  Use the "file" command.
-No symbol file now.
-(gdb) add-symbol-file u-boot 0x87fa0000
-add symbol table from file "u-boot" at
-	.text_addr = 0x87fa0000
-(y or n) y
-Reading symbols from /private/u-boot-arm/u-boot...done.
-Breakpoint 1 at 0x87fa0cc8: file board.c, line 289.
-(gdb) c
-Continuing.
-
-Program received signal SIGINT, Interrupt.
-0xffffffff87fa0de4 in udelay (usec=<value optimized out>) at time.c:78
-78		while ((tmo - read_c0_count()) < 0x7fffffff)