diff options
| author | Wolfgang Denk <wd@denx.de> | 2011-11-08 00:38:52 +0100 |
|---|---|---|
| committer | Wolfgang Denk <wd@denx.de> | 2011-11-08 00:38:52 +0100 |
| commit | 688d8f33f27ea596efb6632388ee60360996eed0 (patch) | |
| tree | 961e812048557d4ac7062e6a7387f543e7d634af | |
| parent | 7ba6d591b5a6ec4ed502de7d94ff726bce13fe61 (diff) | |
| parent | 2026a119512a9cced2957221e83fef92b8211d26 (diff) | |
| download | u-boot-imx-688d8f33f27ea596efb6632388ee60360996eed0.zip u-boot-imx-688d8f33f27ea596efb6632388ee60360996eed0.tar.gz u-boot-imx-688d8f33f27ea596efb6632388ee60360996eed0.tar.bz2 | |
Merge branch 'master' of git://git.denx.de/u-boot-arm
* 'master' of git://git.denx.de/u-boot-arm:
Arm: re-introduce the MACH_TYPE_XXXXXX for EB_CPUX9K2 board
arm: jadecpu: Readd MACH_TYPE_JADECPU
at91: defined mach-types for otc570 board in board config file
at91: defined mach-types for meesc board in board config file
mx31pdk: Enable D and I caches
ehci-mxc: remove incorrect comment
README: Fix supported i.MX SoC list for CONFIG_MXC_SPI
mx53: Turn off child clocks before reconfigure perclk_root
qong: enable support for compressed images
imx: imx31_phycore.h: fix checkpatch warnings
vision2: Remove unused get_board_rev function
mx53smd: Remove unused get_board_rev function
mx53ard: Remove unused get_board_rev function
mx53evk: Remove unused get_board_rev function
mx53evk: Add RTC support
mx53loco: Remove unused get_board_rev function
mx53evk: Remove unneeded '1' from mx53evk.h
OMAP3: mvblx: Initial support for mvBlueLYNX-X
ARM: dig297: Define MACH_TYPE_OMAP3_CPS and CONFIG_MACH_TYPE
omap3: mem: Move comments next to definitions
omap3: mem: Clean-up whitespaces
omap3: mem: Define and use common macros
Davinci: ea20: added PREBOOT to configuration
Davinci: ea20: added I2C support
Davinci: ea20: added video support
VIDEO: davinci: add framebuffer to da8xx
ARM: Davinci: added missing registers to hardware.h
Davinci: ea20: add gpios for LCD backlight control
Davinci: ea20: add gpio for keeping power on in board_late_init
Davinci: ea20: Add default U-Boot environment
Davinci: ea20: Add early init to get early output from console
Davinci: ea20: Add NAND support
Davinci: ea20: set GPIOs to hold MII-Phy in reset and set UART0-Switch for console
Davinci: ea20: set console on UART0
arm, davinci: add cam_enc_4xx support
arm926ejs, davinci: add missing spi defines for dm365
arm926ejs, davinci: add cpuinfo for dm365
arm, davinci: add lowlevel function for dm365 soc
arm, davinci: add header files for dm365
spl, nand: add 4bit HW ecc oob first nand_read_page function
arm, davinci: add support for new spl framework
spl: add option for adding post memory test to the SPL framework
net, davinci_emac: make clock divider in MDIO control register configurable
arm, usb, davinci: make USBPHY_CTL register configurable
usb, davinci: add enable_vbus() weak function
omap3evm: fix errors caused by multiple definitions
omap3evm: Add (quick) configuration for NAND only
omap3evm: Add (quick) configuration for MMC/SD only
omap3evm: move common config options to new file
omap3evm: Prepare to split configuration
omap3evm: Reorder related config options
omap/spl: actually enable the console
davinci_emac: compilation fix, phy is array now
omap3evm: Set environment variable 'ethaddr'
arm, arm926: fix missing symbols in NAND_SPL mode
arm, davinci: Add function lpsc_syncreset()
arm, davinci: replace CONFIG_PRELOADER with CONFIG_SPL_BUILD
arm/km: portl2 environment address update to P1B
arm/km: adapt bootcounter evaluation
arm/km: enable jffs2 cmds
arm/km: trigger reconfiguration for the Xilinx FPGA
arm/km: add boardid and hwkey to kernel command line
ARM: Reintroduce MACH_TYPE_KM_KIRKWOOD for keymile ARM boards
netspace_v2: enable I2C EEPROM support
netspace_v2: fix SDRAM configuration
armada100: define CONFIG_SYS_CACHELINE_SIZE
pantheon: define CONFIG_SYS_CACHELINE_SIZE
kirkwood: define CONFIG_SYS_CACHELINE_SIZE
kirkwood: drop empty asm-offsets.s file
arm/km/mgcoge3un: enhance "waitforne" feature
arm/km: add variable waitforne to mgcoge3un
gplugD: Fix for error:MACH_TYPE_SHEEVAD undeclared
ARM: dreamplug: fix compilation
ARM: DockStar: fix compilation
ARM: netspace_v2: fix warnings
am335x: Drop board_sysinfo struct
am335x: Temporarily add MACH_TYPE define
misc:pmic:samsung Enable PMIC driver at C210 Universal target
dcache:s5p CONFIG_SYS_CACHELINE_SIZE added for s5p UNIVERSAL C210 target
dcache:s5p CONFIG_SYS_CACHELINE_SIZE added for s5p GONI target
smdkv310: use macro for mmc data read function address
smdkv310: use spl framework for mmc spl
SMDKV310: use get_ram_size() to validate dram size
SMDKV310: Initialize board id using CONFIG_MACH_TYPE
ORIGEN : use absolute paths and fix tool naming
ORIGEN : enable device tree support
MX25: tx25: Fix building due to missing MACH_TYPE
mx31: Add board support for HALE TT-01
mx31: add ESD control registers
mx31: define pins and init for UART2 and CSPI3
MX35: add support for flea3 board
MX51: vision2: add MACH_TYPE in config file
vision2: Remove unused header file
mx51evk: Remove unused get_board_rev function
mx51evk: Remove unneeded '1' from mx51evk.h
I2C: Fix mxc_i2c.c problem on imx31_phycore
mx35pdk: Add RTC support
mx51evk: Use GPIO API for configuring the IOMUX
mx51evk: Add RTC support
rtc: Make mc13783-rtc driver generic
qong: remove unneeded IOMUX settings
qong: Use mx31_set_gpr to setup USBH2 pins
mx31: Introduce mx31_set_gpr function
mx31pdk: Add MC13783 PMIC support
qong: remove unneeded "1" from qong.h
misc: pmic: fix regression in pmic_fsl.c (SPI)
mx5 configs: CONFIG_PRIME should really be CONFIG_ETHPRIME
MX35: Drop unnecessary prototypes from imx-regs.h
I2C: added I2C-2 and I2C-3 to MX35
MX35: factorize common assembly code
MX35: add reset cause as provided by other i.MX
MX35: add pins definition for UART3
MX35: added ESDC structure to imx-regs
138 files changed, 7876 insertions, 850 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index 576fea8..030fe4a 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -421,6 +421,7 @@ Georg Schardt <schardt@team-ctech.de> Heiko Schocher <hs@denx.de> + cam_enc_4xx davinci/ARM926EJS charon MPC5200 ids8247 MPC8247 jupiter MPC5200 @@ -560,6 +561,7 @@ Albert ARIBAUD <albert.u.boot@aribaud.net> Stefano Babic <sbabic@denx.de> ea20 davinci + flea3 i.MX35 mx35pdk i.MX35 mx51evk i.MX51 polaris xscale/pxa @@ -666,6 +668,10 @@ Grazvydas Ignotas <notasas@gmail.com> omap3_pandora ARM ARMV7 (OMAP3xx SoC) +Michael Jones <michael.jones@matrix-vision.de> + + omap3_mvblx ARM ARMV7 (OMAP3xx SoC) + Matthias Kaehlcke <matthias@kaehlcke.net> edb9301 ARM920T (EP9301) edb9302 ARM920T (EP9302) @@ -757,6 +763,10 @@ Sandeep Paulraj <s-paulraj@ti.com> davinci_dm365evm ARM926EJS davinci_dm6467evm ARM926EJS +Helmut Raiger <helmut.raiger@hale.at> + + tt01 i.MX31 + Linus Walleij <linus.walleij@linaro.org> integratorap various integratorcp various @@ -416,9 +416,13 @@ $(obj)u-boot.sha1: $(obj)u-boot.bin $(obj)u-boot.dis: $(obj)u-boot $(OBJDUMP) -d $< > $@ -$(obj)u-boot.ubl: $(obj)u-boot-nand.bin +$(obj)u-boot.ubl: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin + $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(PAD_TO) -O binary $(obj)spl/u-boot-spl $(obj)spl/u-boot-spl-pad.bin + cat $(obj)spl/u-boot-spl-pad.bin $(obj)u-boot.bin > $(obj)u-boot-ubl.bin $(obj)tools/mkimage -n $(UBL_CONFIG) -T ublimage \ - -e $(CONFIG_SYS_TEXT_BASE) -d $< $@ + -e $(CONFIG_SYS_TEXT_BASE) -d $(obj)u-boot-ubl.bin $(obj)u-boot.ubl + rm $(obj)u-boot-ubl.bin + rm $(obj)spl/u-boot-spl-pad.bin ifeq ($(CONFIG_SANDBOX),y) GEN_UBOOT = \ @@ -876,7 +876,7 @@ The following options need to be configured: CONFIG_RTC_MPC8xx - use internal RTC of MPC8xx CONFIG_RTC_PCF8563 - use Philips PCF8563 RTC - CONFIG_RTC_MC13783 - use MC13783 RTC + CONFIG_RTC_MC13XXX - use MC13783 or MC13892 RTC CONFIG_RTC_MC146818 - use MC146818 RTC CONFIG_RTC_DS1307 - use Maxim, Inc. DS1307 RTC CONFIG_RTC_DS1337 - use Maxim, Inc. DS1337 RTC @@ -1904,7 +1904,7 @@ The following options need to be configured: CONFIG_MXC_SPI Enables the driver for the SPI controllers on i.MX and MXC - SoCs. Currently only i.MX31 is supported. + SoCs. Currently i.MX31/35/51 are supported. - FPGA Support: CONFIG_FPGA @@ -3257,6 +3257,11 @@ Low Level (hardware related) configuration options: that is executed before the actual U-Boot. E.g. when compiling a NAND SPL. +- CONFIG_SYS_NAND_HW_ECC_OOBFIRST + define this, if you want to read first the oob data + and then the data. This is used for example on + davinci plattforms. + - CONFIG_USE_ARCH_MEMCPY CONFIG_USE_ARCH_MEMSET If these options are used a optimized version of memcpy/memset will diff --git a/arch/arm/cpu/arm1136/mx31/devices.c b/arch/arm/cpu/arm1136/mx31/devices.c index 1e7d48f..b42dac3 100644 --- a/arch/arm/cpu/arm1136/mx31/devices.c +++ b/arch/arm/cpu/arm1136/mx31/devices.c @@ -38,7 +38,22 @@ void mx31_uart1_hw_init(void) } #endif +#ifdef CONFIG_SYS_MX31_UART2 +void mx31_uart2_hw_init(void) +{ + /* setup pins for UART2 */ + mx31_gpio_mux(MUX_RXD2__UART2_RXD_MUX); + mx31_gpio_mux(MUX_TXD2__UART2_TXD_MUX); + mx31_gpio_mux(MUX_RTS2__UART2_RTS_B); + mx31_gpio_mux(MUX_CTS2__UART2_CTS_B); +} +#endif + #ifdef CONFIG_MXC_SPI +/* + * Note: putting several spi setups here makes no sense as they may differ + * at board level (physical pin SS0 of CSPI2 may aswell be used as SS0 of CSPI3) + */ void mx31_spi2_hw_init(void) { /* SPI2 */ diff --git a/arch/arm/cpu/arm1136/mx31/generic.c b/arch/arm/cpu/arm1136/mx31/generic.c index 78df7b9..4f27e25 100644 --- a/arch/arm/cpu/arm1136/mx31/generic.c +++ b/arch/arm/cpu/arm1136/mx31/generic.c @@ -27,6 +27,8 @@ #include <asm/io.h> #include <asm/arch/sys_proto.h> +#define IOMUXGPR (IOMUXC_BASE + 0x008) + static u32 mx31_decode_pll(u32 reg, u32 infreq) { u32 mfi = GET_PLL_MFI(reg); @@ -141,6 +143,19 @@ void mx31_set_pad(enum iomux_pins pin, u32 config) } +void mx31_set_gpr(enum iomux_gp_func gp, char en) +{ + u32 l; + + l = readl(IOMUXGPR); + if (en) + l |= gp; + else + l &= ~gp; + + writel(l, IOMUXGPR); +} + void mxc_setup_weimcs(int cs, const struct mxc_weimcs *weimcs) { struct mx31_weim *weim = (struct mx31_weim *) WEIM_BASE; diff --git a/arch/arm/cpu/arm1136/mx35/generic.c b/arch/arm/cpu/arm1136/mx35/generic.c index 1b9809b..ac4838f 100644 --- a/arch/arm/cpu/arm1136/mx35/generic.c +++ b/arch/arm/cpu/arm1136/mx35/generic.c @@ -422,12 +422,39 @@ U_BOOT_CMD( "" ); +static char *get_reset_cause(void) +{ + /* read RCSR register from CCM module */ + struct ccm_regs *ccm = + (struct ccm_regs *)IMX_CCM_BASE; + + u32 cause = readl(&ccm->rcsr) & 0x0F; + + switch (cause) { + case 0x0000: + return "POR"; + case 0x0002: + return "JTAG"; + case 0x0004: + return "RST"; + case 0x0008: + return "WDOG"; + default: + return "unknown reset"; + } +} + #if defined(CONFIG_DISPLAY_CPUINFO) int print_cpuinfo(void) { - printf("CPU: Freescale i.MX35 at %d MHz\n", + u32 srev = get_cpu_rev(); + + printf("CPU: Freescale i.MX35 rev %d.%d at %d MHz.\n", + (srev & 0xF0) >> 4, (srev & 0x0F), get_mcu_main_clk() / 1000000); - /* mxc_dump_clocks(); */ + + printf("Reset cause: %s\n", get_reset_cause()); + return 0; } #endif diff --git a/arch/arm/cpu/arm926ejs/davinci/Makefile b/arch/arm/cpu/arm926ejs/davinci/Makefile index 0310957..98c7e55 100644 --- a/arch/arm/cpu/arm926ejs/davinci/Makefile +++ b/arch/arm/cpu/arm926ejs/davinci/Makefile @@ -35,6 +35,11 @@ COBJS-$(CONFIG_SOC_DM644X) += dm644x.o COBJS-$(CONFIG_SOC_DM646X) += dm646x.o COBJS-$(CONFIG_DRIVER_TI_EMAC) += lxt972.o dp83848.o et1011c.o ksz8873.o +ifdef CONFIG_SPL_BUILD +COBJS-y += spl.o +COBJS-y += dm365_lowlevel.o +endif + SOBJS = reset.o ifndef CONFIG_SKIP_LOWLEVEL_INIT diff --git a/arch/arm/cpu/arm926ejs/davinci/cpu.c b/arch/arm/cpu/arm926ejs/davinci/cpu.c index 02819f6..9ea9785 100644 --- a/arch/arm/cpu/arm926ejs/davinci/cpu.c +++ b/arch/arm/cpu/arm926ejs/davinci/cpu.c @@ -146,13 +146,15 @@ static inline unsigned pll_prediv(volatile void *pllbase) return 8; else return pll_div(pllbase, PLLC_PREDIV); +#elif defined(CONFIG_SOC_DM365) + return pll_div(pllbase, PLLC_PREDIV); #endif return 1; } static inline unsigned pll_postdiv(volatile void *pllbase) { -#ifdef CONFIG_SOC_DM355 +#if defined(CONFIG_SOC_DM355) || defined(CONFIG_SOC_DM365) return pll_div(pllbase, PLLC_POSTDIV); #elif defined(CONFIG_SOC_DM6446) if (pllbase == (volatile void *)DAVINCI_PLL_CNTRL0_BASE) @@ -171,9 +173,13 @@ static unsigned pll_sysclk_mhz(unsigned pll_addr, unsigned div) #endif /* the PLL might be bypassed */ - if (REG(pllbase + PLLC_PLLCTL) & BIT(0)) { + if (readl(pllbase + PLLC_PLLCTL) & BIT(0)) { base /= pll_prediv(pllbase); +#if defined(CONFIG_SOC_DM365) + base *= 2 * (readl(pllbase + PLLC_PLLM) & 0x0ff); +#else base *= 1 + (REG(pllbase + PLLC_PLLM) & 0x0ff); +#endif base /= pll_postdiv(pllbase); } return DIV_ROUND_UP(base, 1000 * pll_div(pllbase, div)); @@ -184,8 +190,13 @@ int print_cpuinfo(void) /* REVISIT fetch and display CPU ID and revision information * too ... that will matter as more revisions appear. */ +#if defined(CONFIG_SOC_DM365) + printf("Cores: ARM %d MHz", + pll_sysclk_mhz(DAVINCI_PLL_CNTRL1_BASE, ARM_PLLDIV)); +#else printf("Cores: ARM %d MHz", pll_sysclk_mhz(DAVINCI_PLL_CNTRL0_BASE, ARM_PLLDIV)); +#endif #ifdef DSP_PLLDIV printf(", DSP %d MHz", @@ -194,8 +205,13 @@ int print_cpuinfo(void) printf("\nDDR: %d MHz\n", /* DDR PHY uses an x2 input clock */ +#if defined(CONFIG_SOC_DM365) + pll_sysclk_mhz(DAVINCI_PLL_CNTRL0_BASE, DDR_PLLDIV) + / 2); +#else pll_sysclk_mhz(DAVINCI_PLL_CNTRL1_BASE, DDR_PLLDIV) / 2); +#endif return 0; } @@ -205,6 +221,13 @@ unsigned int davinci_arm_clk_get() return pll_sysclk_mhz(DAVINCI_PLL_CNTRL0_BASE, ARM_PLLDIV) * 1000000; } #endif + +#if defined(CONFIG_SOC_DM365) +unsigned int davinci_clk_get(unsigned int div) +{ + return pll_sysclk_mhz(DAVINCI_PLL_CNTRL0_BASE, div) * 1000000; +} +#endif #endif /* CONFIG_DISPLAY_CPUINFO */ #endif /* !CONFIG_SOC_DA8XX */ diff --git a/arch/arm/cpu/arm926ejs/davinci/dm365_lowlevel.c b/arch/arm/cpu/arm926ejs/davinci/dm365_lowlevel.c new file mode 100644 index 0000000..3772e64 --- /dev/null +++ b/arch/arm/cpu/arm926ejs/davinci/dm365_lowlevel.c @@ -0,0 +1,439 @@ +/* + * SoC-specific lowlevel code for tms320dm365 and similar chips + * Actually used for booting from NAND with nand_spl. + * + * Copyright (C) 2011 + * Heiko Schocher, DENX Software Engineering, hs@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#include <common.h> +#include <nand.h> +#include <ns16550.h> +#include <post.h> +#include <asm/arch/dm365_lowlevel.h> +#include <asm/arch/hardware.h> + +void dm365_waitloop(unsigned long loopcnt) +{ + unsigned long i; + + for (i = 0; i < loopcnt; i++) + asm(" NOP"); +} + +int dm365_pll1_init(unsigned long pllmult, unsigned long prediv) +{ + unsigned int clksrc = 0x0; + + /* Power up the PLL */ + clrbits_le32(&dv_pll0_regs->pllctl, PLLCTL_PLLPWRDN); + + clrbits_le32(&dv_pll0_regs->pllctl, PLLCTL_RES_9); + setbits_le32(&dv_pll0_regs->pllctl, clksrc << 8); + + /* + * Set PLLENSRC '0', PLL Enable(PLLEN) selection is controlled + * through MMR + */ + clrbits_le32(&dv_pll0_regs->pllctl, PLLCTL_PLLENSRC); + + /* Set PLLEN=0 => PLL BYPASS MODE */ + clrbits_le32(&dv_pll0_regs->pllctl, PLLCTL_PLLEN); + + dm365_waitloop(150); + + /* PLLRST=1(reset assert) */ + setbits_le32(&dv_pll0_regs->pllctl, PLLCTL_PLLRST); + + dm365_waitloop(300); + + /*Bring PLL out of Reset*/ + clrbits_le32(&dv_pll0_regs->pllctl, PLLCTL_PLLRST); + + /* Program the Multiper and Pre-Divider for PLL1 */ + writel(pllmult, &dv_pll0_regs->pllm); + writel(prediv, &dv_pll0_regs->prediv); + + /* Assert TENABLE = 1, TENABLEDIV = 1, TINITZ = 1 */ + writel(PLLSECCTL_STOPMODE | PLLSECCTL_TENABLEDIV | PLLSECCTL_TENABLE | + PLLSECCTL_TINITZ, &dv_pll0_regs->secctl); + /* Assert TENABLE = 1, TENABLEDIV = 1, TINITZ = 0 */ + writel(PLLSECCTL_STOPMODE | PLLSECCTL_TENABLEDIV | PLLSECCTL_TENABLE, + &dv_pll0_regs->secctl); + /* Assert TENABLE = 0, TENABLEDIV = 0, TINITZ = 0 */ + writel(PLLSECCTL_STOPMODE, &dv_pll0_regs->secctl); + /* Assert TENABLE = 0, TENABLEDIV = 0, TINITZ = 1 */ + writel(PLLSECCTL_STOPMODE | PLLSECCTL_TINITZ, &dv_pll0_regs->secctl); + + /* Program the PostDiv for PLL1 */ + writel(0x8000, &dv_pll0_regs->postdiv); + + /* Post divider setting for PLL1 */ + writel(CONFIG_SYS_DM36x_PLL1_PLLDIV1, &dv_pll0_regs->plldiv1); + writel(CONFIG_SYS_DM36x_PLL1_PLLDIV2, &dv_pll0_regs->plldiv2); + writel(CONFIG_SYS_DM36x_PLL1_PLLDIV3, &dv_pll0_regs->plldiv3); + writel(CONFIG_SYS_DM36x_PLL1_PLLDIV4, &dv_pll0_regs->plldiv4); + writel(CONFIG_SYS_DM36x_PLL1_PLLDIV5, &dv_pll0_regs->plldiv5); + writel(CONFIG_SYS_DM36x_PLL1_PLLDIV6, &dv_pll0_regs->plldiv6); + writel(CONFIG_SYS_DM36x_PLL1_PLLDIV7, &dv_pll0_regs->plldiv7); + writel(CONFIG_SYS_DM36x_PLL1_PLLDIV8, &dv_pll0_regs->plldiv8); + writel(CONFIG_SYS_DM36x_PLL1_PLLDIV9, &dv_pll0_regs->plldiv9); + + dm365_waitloop(300); + + /* Set the GOSET bit */ + writel(PLLCMD_GOSET, &dv_pll0_regs->pllcmd); /* Go */ + + dm365_waitloop(300); + + /* Wait for PLL to LOCK */ + while (!((readl(&dv_sys_module_regs->pll0_config) & PLL0_LOCK) + == PLL0_LOCK)) + ; + + /* Enable the PLL Bit of PLLCTL*/ + setbits_le32(&dv_pll0_regs->pllctl, PLLCTL_PLLEN); + + return 0; +} + +int dm365_pll2_init(unsigned long pllm, unsigned long prediv) +{ + unsigned int clksrc = 0x0; + + /* Power up the PLL*/ + clrbits_le32(&dv_pll1_regs->pllctl, PLLCTL_PLLPWRDN); + + /* + * Select the Clock Mode as Onchip Oscilator or External Clock on + * MXI pin + * VDB has input on MXI pin + */ + clrbits_le32(&dv_pll1_regs->pllctl, PLLCTL_RES_9); + setbits_le32(&dv_pll1_regs->pllctl, clksrc << 8); + + /* + * Set PLLENSRC '0', PLL Enable(PLLEN) selection is controlled + * through MMR + */ + clrbits_le32(&dv_pll1_regs->pllctl, PLLCTL_PLLENSRC); + + /* Set PLLEN=0 => PLL BYPASS MODE */ + clrbits_le32(&dv_pll1_regs->pllctl, PLLCTL_PLLEN); + + dm365_waitloop(50); + + /* PLLRST=1(reset assert) */ + setbits_le32(&dv_pll1_regs->pllctl, PLLCTL_PLLRST); + + dm365_waitloop(300); + + /* Bring PLL out of Reset */ + clrbits_le32(&dv_pll1_regs->pllctl, PLLCTL_PLLRST); + + /* Program the Multiper and Pre-Divider for PLL2 */ + writel(pllm, &dv_pll1_regs->pllm); + writel(prediv, &dv_pll1_regs->prediv); + + writel(0x8000, &dv_pll1_regs->postdiv); + + /* Assert TENABLE = 1, TENABLEDIV = 1, TINITZ = 1 */ + writel(PLLSECCTL_STOPMODE | PLLSECCTL_TENABLEDIV | PLLSECCTL_TENABLE | + PLLSECCTL_TINITZ, &dv_pll1_regs->secctl); + /* Assert TENABLE = 1, TENABLEDIV = 1, TINITZ = 0 */ + writel(PLLSECCTL_STOPMODE | PLLSECCTL_TENABLEDIV | PLLSECCTL_TENABLE, + &dv_pll1_regs->secctl); + /* Assert TENABLE = 0, TENABLEDIV = 0, TINITZ = 0 */ + writel(PLLSECCTL_STOPMODE, &dv_pll1_regs->secctl); + /* Assert TENABLE = 0, TENABLEDIV = 0, TINITZ = 1 */ + writel(PLLSECCTL_STOPMODE | PLLSECCTL_TINITZ, &dv_pll1_regs->secctl); + + /* Post divider setting for PLL2 */ + writel(CONFIG_SYS_DM36x_PLL2_PLLDIV1, &dv_pll1_regs->plldiv1); + writel(CONFIG_SYS_DM36x_PLL2_PLLDIV2, &dv_pll1_regs->plldiv2); + writel(CONFIG_SYS_DM36x_PLL2_PLLDIV3, &dv_pll1_regs->plldiv3); + writel(CONFIG_SYS_DM36x_PLL2_PLLDIV4, &dv_pll1_regs->plldiv4); + writel(CONFIG_SYS_DM36x_PLL2_PLLDIV5, &dv_pll1_regs->plldiv5); + + /* GoCmd for PostDivider to take effect */ + writel(PLLCMD_GOSET, &dv_pll1_regs->pllcmd); + + dm365_waitloop(150); + + /* Wait for PLL to LOCK */ + while (!((readl(&dv_sys_module_regs->pll1_config) & PLL1_LOCK) + == PLL1_LOCK)) + ; + + dm365_waitloop(4100); + + /* Enable the PLL2 */ + setbits_le32(&dv_pll1_regs->pllctl, PLLCTL_PLLEN); + + /* do this after PLL's have been set up */ + writel(CONFIG_SYS_DM36x_PERI_CLK_CTRL, + &dv_sys_module_regs->peri_clkctl); + + return 0; +} + +int dm365_ddr_setup(void) +{ + lpsc_on(DAVINCI_LPSC_DDR_EMIF); + clrbits_le32(&dv_sys_module_regs->vtpiocr, + VPTIO_IOPWRDN | VPTIO_CLRZ | VPTIO_LOCK | VPTIO_PWRDN); + + /* Set bit CLRZ (bit 13) */ + setbits_le32(&dv_sys_module_regs->vtpiocr, VPTIO_CLRZ); + + /* Check VTP READY Status */ + while (!(readl(&dv_sys_module_regs->vtpiocr) & VPTIO_RDY)) + ; + + /* Set bit VTP_IOPWRDWN bit 14 for DDR input buffers) */ + setbits_le32(&dv_sys_module_regs->vtpiocr, VPTIO_IOPWRDN); + + /* Set bit LOCK(bit7) */ + setbits_le32(&dv_sys_module_regs->vtpiocr, VPTIO_LOCK); + + /* + * Powerdown VTP as it is locked (bit 6) + * Set bit VTP_IOPWRDWN bit 14 for DDR input buffers) + */ + setbits_le32(&dv_sys_module_regs->vtpiocr, + VPTIO_IOPWRDN | VPTIO_PWRDN); + + /* Wait for calibration to complete */ + dm365_waitloop(150); + + /* Set the DDR2 to synreset, then enable it again */ + lpsc_syncreset(DAVINCI_LPSC_DDR_EMIF); + lpsc_on(DAVINCI_LPSC_DDR_EMIF); + + writel(CONFIG_SYS_DM36x_DDR2_DDRPHYCR, &dv_ddr2_regs_ctrl->ddrphycr); + + /* Program SDRAM Bank Config Register */ + writel((CONFIG_SYS_DM36x_DDR2_SDBCR | DV_DDR_BOOTUNLOCK), + &dv_ddr2_regs_ctrl->sdbcr); + writel((CONFIG_SYS_DM36x_DDR2_SDBCR | DV_DDR_TIMUNLOCK), + &dv_ddr2_regs_ctrl->sdbcr); + + /* Program SDRAM Timing Control Register1 */ + writel(CONFIG_SYS_DM36x_DDR2_SDTIMR, &dv_ddr2_regs_ctrl->sdtimr); + /* Program SDRAM Timing Control Register2 */ + writel(CONFIG_SYS_DM36x_DDR2_SDTIMR2, &dv_ddr2_regs_ctrl->sdtimr2); + + writel(CONFIG_SYS_DM36x_DDR2_PBBPR, &dv_ddr2_regs_ctrl->pbbpr); + + writel(CONFIG_SYS_DM36x_DDR2_SDBCR, &dv_ddr2_regs_ctrl->sdbcr); + + /* Program SDRAM Refresh Control Register */ + writel(CONFIG_SYS_DM36x_DDR2_SDRCR, &dv_ddr2_regs_ctrl->sdrcr); + + lpsc_syncreset(DAVINCI_LPSC_DDR_EMIF); + lpsc_on(DAVINCI_LPSC_DDR_EMIF); + + return 0; +} + +void dm365_vpss_sync_reset(void) +{ + unsigned int PdNum = 0; + + /* VPSS_CLKMD 1:1 */ + setbits_le32(&dv_sys_module_regs->vpss_clkctl, + VPSS_CLK_CTL_VPSS_CLKMD); + + /* LPSC SyncReset DDR Clock Enable */ + writel(((readl(&dv_psc_regs->mdctl[47]) & ~PSC_MD_STATE_MSK) | + PSC_SYNCRESET), &dv_psc_regs->mdctl[47]); + + writel((1 << PdNum), &dv_psc_regs->ptcmd); + + while (!(((readl(&dv_psc_regs->ptstat) >> PdNum) & PSC_GOSTAT) == 0)) + ; + while (!((readl(&dv_psc_regs->mdstat[47]) & PSC_MD_STATE_MSK) == + PSC_SYNCRESET)) + ; +} + +void dm365_por_reset(void) +{ + if (readl(&dv_pll0_regs->rstype) & 3) + dm365_vpss_sync_reset(); +} + +void dm365_psc_init(void) +{ + unsigned char i = 0; + unsigned char lpsc_start; + unsigned char lpsc_end, lpscgroup, lpscmin, lpscmax; + unsigned int PdNum = 0; + + lpscmin = 0; + lpscmax = 2; + + for (lpscgroup = lpscmin; lpscgroup <= lpscmax; lpscgroup++) { + if (lpscgroup == 0) { + lpsc_start = 0; /* Enabling LPSC 3 to 28 SCR first */ + lpsc_end = 28; + } else if (lpscgroup == 1) { /* Skip locked LPSCs [29-37] */ + lpsc_start = 38; + lpsc_end = 47; + } else { + lpsc_start = 50; + lpsc_end = 51; + } + + /* NEXT=0x3, Enable LPSC's */ + for (i = lpsc_start; i <= lpsc_end; i++) + setbits_le32(&dv_psc_regs->mdctl[i], 0x3); + + /* + * Program goctl to start transition sequence for LPSCs + * CSL_PSC_0_REGS->PTCMD = (1<<PdNum); Kick off Power + * Domain 0 Modules + */ + writel((1 << PdNum), &dv_psc_regs->ptcmd); + + /* + * Wait for GOSTAT = NO TRANSITION from PSC for Powerdomain 0 + */ + while (!(((readl(&dv_psc_regs->ptstat) >> PdNum) & PSC_GOSTAT) + == 0)) + ; + + /* Wait for MODSTAT = ENABLE from LPSC's */ + for (i = lpsc_start; i <= lpsc_end; i++) + while (!((readl(&dv_psc_regs->mdstat[i]) & + PSC_MD_STATE_MSK) == 0x3)) + ; + } +} + +static void dm365_emif_init(void) +{ + writel(CONFIG_SYS_DM36x_AWCCR, &davinci_emif_regs->awccr); + writel(CONFIG_SYS_DM36x_AB1CR, &davinci_emif_regs->ab1cr); + + setbits_le32(&davinci_emif_regs->nandfcr, 1); + + writel(CONFIG_SYS_DM36x_AB2CR, &davinci_emif_regs->ab2cr); + + return; +} + +void dm365_pinmux_ctl(unsigned long offset, unsigned long mask, + unsigned long value) +{ + clrbits_le32(&dv_sys_module_regs->pinmux[offset], mask); + setbits_le32(&dv_sys_module_regs->pinmux[offset], (mask & value)); +} + +__attribute__((weak)) +void board_gpio_init(void) +{ + return; +} + +#if defined(CONFIG_POST) +int post_log(char *format, ...) +{ + return 0; +} +#endif + +void dm36x_lowlevel_init(ulong bootflag) +{ + /* + * copied from arch/arm/cpu/arm926ejs/start.S + * + * flush v4 I/D caches + */ + asm("mov r0, #0"); + asm("mcr p15, 0, r0, c7, c7, 0"); /* flush v3/v4 cache */ + asm("mcr p15, 0, r0, c8, c7, 0"); /* flush v4 TLB */ + + /* + * disable MMU stuff and caches + */ + asm("mrc p15, 0, r0, c1, c0, 0"); + /* clear bits 13, 9:8 (--V- --RS) */ + asm("bic r0, r0, #0x00002300"); + /* clear bits 7, 2:0 (B--- -CAM) */ + asm("bic r0, r0, #0x00000087"); + /* set bit 2 (A) Align */ + asm("orr r0, r0, #0x00000002"); + /* set bit 12 (I) I-Cache */ + asm("orr r0, r0, #0x00001000"); + asm("mcr p15, 0, r0, c1, c0, 0"); + + /* Mask all interrupts */ + writel(0x04, &dv_aintc_regs->intctl); + writel(0x0, &dv_aintc_regs->eabase); + writel(0x0, &dv_aintc_regs->eint0); + writel(0x0, &dv_aintc_regs->eint1); + + /* Clear all interrupts */ + writel(0xffffffff, &dv_aintc_regs->fiq0); + writel(0xffffffff, &dv_aintc_regs->fiq1); + writel(0xffffffff, &dv_aintc_regs->irq0); + writel(0xffffffff, &dv_aintc_regs->irq1); + + /* System PSC setup - enable all */ + dm365_psc_init(); + + /* Setup Pinmux */ + dm365_pinmux_ctl(0, 0xFFFFFFFF, CONFIG_SYS_DM36x_PINMUX0); + dm365_pinmux_ctl(1, 0xFFFFFFFF, CONFIG_SYS_DM36x_PINMUX1); + dm365_pinmux_ctl(2, 0xFFFFFFFF, CONFIG_SYS_DM36x_PINMUX2); + dm365_pinmux_ctl(3, 0xFFFFFFFF, CONFIG_SYS_DM36x_PINMUX3); + dm365_pinmux_ctl(4, 0xFFFFFFFF, CONFIG_SYS_DM36x_PINMUX4); + + /* PLL setup */ + dm365_pll1_init(CONFIG_SYS_DM36x_PLL1_PLLM, + CONFIG_SYS_DM36x_PLL1_PREDIV); + dm365_pll2_init(CONFIG_SYS_DM36x_PLL2_PLLM, + CONFIG_SYS_DM36x_PLL2_PREDIV); + + /* GPIO setup */ + board_gpio_init(); + + NS16550_init((NS16550_t)(CONFIG_SYS_NS16550_COM1), + CONFIG_SYS_NS16550_CLK / 16 / CONFIG_BAUDRATE); + + /* + * Fix Power and Emulation Management Register + * see sprufh2.pdf page 38 Table 22 + */ + writel(0x0000e003, (CONFIG_SYS_NS16550_COM1 + 0x30)); + puts("ddr init\n"); + dm365_ddr_setup(); + + puts("emif init\n"); + dm365_emif_init(); + +#if defined(CONFIG_POST) + /* + * Do memory tests, calls arch_memory_failure_handle() + * if error detected. + */ + memory_post_test(0); +#endif +} diff --git a/arch/arm/cpu/arm926ejs/davinci/psc.c b/arch/arm/cpu/arm926ejs/davinci/psc.c index 707fa47..3e92518 100644 --- a/arch/arm/cpu/arm926ejs/davinci/psc.c +++ b/arch/arm/cpu/arm926ejs/davinci/psc.c @@ -46,7 +46,7 @@ */ /* Works on Always On power domain only (no PD argument) */ -void lpsc_on(unsigned int id) +static void lpsc_transition(unsigned int id, unsigned int state) { dv_reg_p mdstat, mdctl, ptstat, ptcmd; #ifdef CONFIG_SOC_DA8XX @@ -83,10 +83,10 @@ void lpsc_on(unsigned int id) while (readl(ptstat) & 0x01) continue; - if ((readl(mdstat) & PSC_MDSTAT_STATE) == 0x03) - return; /* Already on and enabled */ + if ((readl(mdstat) & PSC_MDSTAT_STATE) == state) + return; /* Already in that state */ - writel(readl(mdctl) | 0x03, mdctl); + writel((readl(mdctl) & ~PSC_MDCTL_NEXT) | state, mdctl); switch (id) { #ifdef CONFIG_SOC_DM644X @@ -114,10 +114,20 @@ void lpsc_on(unsigned int id) while (readl(ptstat) & 0x01) continue; - while ((readl(mdstat) & PSC_MDSTAT_STATE) != 0x03) + while ((readl(mdstat) & PSC_MDSTAT_STATE) != state) continue; } +void lpsc_on(unsigned int id) +{ + lpsc_transition(id, 0x03); +} + +void lpsc_syncreset(unsigned int id) +{ + lpsc_transition(id, 0x01); +} + /* Not all DaVinci chips have a DSP power domain. */ #ifdef CONFIG_SOC_DM644X diff --git a/arch/arm/cpu/arm926ejs/davinci/spl.c b/arch/arm/cpu/arm926ejs/davinci/spl.c new file mode 100644 index 0000000..d9b9398 --- /dev/null +++ b/arch/arm/cpu/arm926ejs/davinci/spl.c @@ -0,0 +1,63 @@ +/* + * Copyright (C) 2011 + * Heiko Schocher, DENX Software Engineering, hs@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <common.h> +#include <asm/u-boot.h> +#include <asm/utils.h> +#include <nand.h> +#include <asm/arch/dm365_lowlevel.h> +#include <ns16550.h> + +void puts(const char *str) +{ + while (*str) + putc(*str++); +} + +void putc(char c) +{ + if (c == '\n') + NS16550_putc((NS16550_t)(CONFIG_SYS_NS16550_COM1), '\r'); + + NS16550_putc((NS16550_t)(CONFIG_SYS_NS16550_COM1), c); +} + +inline void hang(void) +{ + puts("### ERROR ### Please RESET the board ###\n"); + for (;;) + ; +} + +void board_init_f(ulong dummy) +{ + dm36x_lowlevel_init(0); + relocate_code(CONFIG_SPL_STACK, NULL, CONFIG_SPL_TEXT_BASE); +} + +void board_init_r(gd_t *id, ulong dummy) +{ + + nand_init(); + puts("Nand boot...\n"); + nand_boot(); +} diff --git a/arch/arm/cpu/arm926ejs/kirkwood/asm-offsets.s b/arch/arm/cpu/arm926ejs/kirkwood/asm-offsets.s deleted file mode 100644 index e69de29..0000000 --- a/arch/arm/cpu/arm926ejs/kirkwood/asm-offsets.s +++ /dev/null diff --git a/arch/arm/cpu/arm926ejs/start.S b/arch/arm/cpu/arm926ejs/start.S index 5e30745..339c5ed 100644 --- a/arch/arm/cpu/arm926ejs/start.S +++ b/arch/arm/cpu/arm926ejs/start.S @@ -126,7 +126,15 @@ _fiq: .globl _TEXT_BASE _TEXT_BASE: +#ifdef CONFIG_NAND_SPL /* deprecated, use instead CONFIG_SPL_BUILD */ .word CONFIG_SYS_TEXT_BASE +#else +#ifdef CONFIG_SPL_BUILD + .word CONFIG_SPL_TEXT_BASE +#else + .word CONFIG_SYS_TEXT_BASE +#endif +#endif /* * These are defined in the board-specific linker script. @@ -146,6 +154,12 @@ _bss_end_ofs: _end_ofs: .word _end - _start +#ifdef CONFIG_NAND_U_BOOT +.globl _end +_end: + .word __bss_end__ +#endif + #ifdef CONFIG_USE_IRQ /* IRQ stack memory (calculated at run-time) */ .globl IRQ_STACK_START @@ -186,7 +200,15 @@ reset: /* Set stackpointer in internal RAM to call board_init_f */ call_board_init_f: +#ifdef CONFIG_NAND_SPL /* deprecated, use instead CONFIG_SPL_BUILD */ + ldr sp, =(CONFIG_SYS_INIT_SP_ADDR) +#else +#ifdef CONFIG_SPL_BUILD + ldr sp, =(CONFIG_SPL_STACK) +#else ldr sp, =(CONFIG_SYS_INIT_SP_ADDR) +#endif +#endif bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ ldr r0,=0x00000000 bl board_init_f @@ -211,6 +233,7 @@ stack_setup: mov sp, r4 adr r0, _start + sub r9, r6, r0 /* r9 <- relocation offset */ cmp r0, r6 beq clear_bss /* skip relocation */ mov r1, r6 /* r1 <- scratch for copy loop */ @@ -265,12 +288,17 @@ fixnext: #endif clear_bss: -#ifndef CONFIG_SPL_BUILD +#ifdef CONFIG_SPL_BUILD + /* No relocation for SPL */ + ldr r0, =__bss_start + ldr r1, =__bss_end__ +#else ldr r0, _bss_start_ofs ldr r1, _bss_end_ofs mov r4, r6 /* reloc addr */ add r0, r0, r4 add r1, r1, r4 +#endif mov r2, #0x00000000 /* clear */ clbss_l:str r2, [r0] /* clear loop... */ @@ -278,6 +306,7 @@ clbss_l:str r2, [r0] /* clear loop... */ cmp r0, r1 bne clbss_l +#ifndef CONFIG_SPL_BUILD bl coloured_LED_init bl red_led_on #endif diff --git a/arch/arm/cpu/armv7/mx5/lowlevel_init.S b/arch/arm/cpu/armv7/mx5/lowlevel_init.S index 7e37221..01f6d75 100644 --- a/arch/arm/cpu/armv7/mx5/lowlevel_init.S +++ b/arch/arm/cpu/armv7/mx5/lowlevel_init.S @@ -180,6 +180,21 @@ 1: ldr r1, [r0, #CLKCTL_CDHIPR] cmp r1, #0x0 bne 1b +#else + ldr r1, =0x3FFFFFFF + str r1, [r0, #CLKCTL_CCGR0] + ldr r1, =0x0 + str r1, [r0, #CLKCTL_CCGR1] + str r1, [r0, #CLKCTL_CCGR2] + str r1, [r0, #CLKCTL_CCGR3] + str r1, [r0, #CLKCTL_CCGR7] + + ldr r1, =0x00030000 + str r1, [r0, #CLKCTL_CCGR4] + ldr r1, =0x00FFF030 + str r1, [r0, #CLKCTL_CCGR5] + ldr r1, =0x0F00030F + str r1, [r0, #CLKCTL_CCGR6] #endif /* Switch ARM to step clock */ diff --git a/arch/arm/cpu/armv7/omap-common/spl.c b/arch/arm/cpu/armv7/omap-common/spl.c index d37ca0f..2c59d2b 100644 --- a/arch/arm/cpu/armv7/omap-common/spl.c +++ b/arch/arm/cpu/armv7/omap-common/spl.c @@ -156,6 +156,8 @@ void preloader_console_init(void) serial_init(); /* serial communications setup */ + gd->have_console = 1; + /* Avoid a second "U-Boot" coming from this string */ u_boot_rev = &u_boot_rev[7]; diff --git a/arch/arm/include/asm/arch-am33xx/sys_proto.h b/arch/arm/include/asm/arch-am33xx/sys_proto.h index 1e265c6..09ed650 100644 --- a/arch/arm/include/asm/arch-am33xx/sys_proto.h +++ b/arch/arm/include/asm/arch-am33xx/sys_proto.h @@ -20,13 +20,6 @@ #define _SYS_PROTO_H_ #define BOARD_REV_ID 0x0 -struct { - u32 board_type_v1; - u32 board_type_v2; - u32 mtype; - char *board_string; - char *nand_string; -} board_sysinfo; u32 get_cpu_rev(void); u32 get_sysboot_value(void); diff --git a/arch/arm/include/asm/arch-armada100/config.h b/arch/arm/include/asm/arch-armada100/config.h index d2094e5..637f313 100644 --- a/arch/arm/include/asm/arch-armada100/config.h +++ b/arch/arm/include/asm/arch-armada100/config.h @@ -33,6 +33,8 @@ #include <asm/arch/armada100.h> #define CONFIG_ARM926EJS 1 /* Basic Architecture */ +/* default Dcache Line length for armada100 */ +#define CONFIG_SYS_CACHELINE_SIZE 32 #define CONFIG_SYS_TCLK (14745600) /* NS16550 clk config */ #define CONFIG_SYS_HZ_CLOCK (3250000) /* Timer Freq. 3.25MHZ */ diff --git a/arch/arm/include/asm/arch-davinci/aintc_defs.h b/arch/arm/include/asm/arch-davinci/aintc_defs.h new file mode 100644 index 0000000..8f37053 --- /dev/null +++ b/arch/arm/include/asm/arch-davinci/aintc_defs.h @@ -0,0 +1,50 @@ +/* + * Copyright (C) 2011 + * Heiko Schocher, DENX Software Engineering, hs@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef _DV_AINTC_DEFS_H_ +#define _DV_AINTC_DEFS_H_ + +struct dv_aintc_regs { + unsigned int fiq0; /* 0x00 */ + unsigned int fiq1; /* 0x04 */ + unsigned int irq0; /* 0x08 */ + unsigned int irq1; /* 0x0c */ + unsigned int fiqentry; /* 0x10 */ + unsigned int irqentry; /* 0x14 */ + unsigned int eint0; /* 0x18 */ + unsigned int eint1; /* 0x1c */ + unsigned int intctl; /* 0x20 */ + unsigned int eabase; /* 0x24 */ + unsigned char rsvd0[8]; /* 0x28 */ + unsigned int intpri0; /* 0x30 */ + unsigned int intpri1; /* 0x34 */ + unsigned int intpri2; /* 0x38 */ + unsigned int intpri3; /* 0x3c */ + unsigned int intpri4; /* 0x40 */ + unsigned int intpri5; /* 0x44 */ + unsigned int intpri6; /* 0x48 */ + unsigned int intpri7; /* 0x4c */ +}; + +#define dv_aintc_regs ((struct dv_aintc_regs *)DAVINCI_ARM_INTC_BASE) + +#endif /* _DV_AINTC_DEFS_H_ */ diff --git a/arch/arm/include/asm/arch-davinci/da8xx-fb.h b/arch/arm/include/asm/arch-davinci/da8xx-fb.h new file mode 100644 index 0000000..6d2327c --- /dev/null +++ b/arch/arm/include/asm/arch-davinci/da8xx-fb.h @@ -0,0 +1,126 @@ +/* + * Porting to u-boot: + * + * (C) Copyright 2011 + * Stefano Babic, DENX Software Engineering, sbabic@denx.de. + * + * Copyright (C) 2008-2009 MontaVista Software Inc. + * Copyright (C) 2008-2009 Texas Instruments Inc + * + * Based on the LCD driver for TI Avalanche processors written by + * Ajay Singh and Shalom Hai. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option)any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef DA8XX_FB_H +#define DA8XX_FB_H + +enum panel_type { + QVGA = 0 +}; + +enum panel_shade { + MONOCHROME = 0, + COLOR_ACTIVE, + COLOR_PASSIVE, +}; + +enum raster_load_mode { + LOAD_DATA = 1, + LOAD_PALETTE, +}; + +struct display_panel { + enum panel_type panel_type; /* QVGA */ + int max_bpp; + int min_bpp; + enum panel_shade panel_shade; +}; + +struct da8xx_panel { + const char name[25]; /* Full name <vendor>_<model> */ + unsigned short width; + unsigned short height; + int hfp; /* Horizontal front porch */ + int hbp; /* Horizontal back porch */ + int hsw; /* Horizontal Sync Pulse Width */ + int vfp; /* Vertical front porch */ + int vbp; /* Vertical back porch */ + int vsw; /* Vertical Sync Pulse Width */ + unsigned int pxl_clk; /* Pixel clock */ + unsigned char invert_pxl_clk; /* Invert Pixel clock */ +}; + +struct da8xx_lcdc_platform_data { + const char manu_name[10]; + void *controller_data; + const char type[25]; + void (*panel_power_ctrl)(int); +}; + +struct lcd_ctrl_config { + const struct display_panel *p_disp_panel; + + /* AC Bias Pin Frequency */ + int ac_bias; + + /* AC Bias Pin Transitions per Interrupt */ + int ac_bias_intrpt; + + /* DMA burst size */ + int dma_burst_sz; + + /* Bits per pixel */ + int bpp; + + /* FIFO DMA Request Delay */ + int fdd; + + /* TFT Alternative Signal Mapping (Only for active) */ + unsigned char tft_alt_mode; + + /* 12 Bit Per Pixel (5-6-5) Mode (Only for passive) */ + unsigned char stn_565_mode; + + /* Mono 8-bit Mode: 1=D0-D7 or 0=D0-D3 */ + unsigned char mono_8bit_mode; + + /* Invert line clock */ + unsigned char invert_line_clock; + + /* Invert frame clock */ + unsigned char invert_frm_clock; + + /* Horizontal and Vertical Sync Edge: 0=rising 1=falling */ + unsigned char sync_edge; + + /* Horizontal and Vertical Sync: Control: 0=ignore */ + unsigned char sync_ctrl; + + /* Raster Data Order Select: 1=Most-to-least 0=Least-to-most */ + unsigned char raster_order; +}; + +struct lcd_sync_arg { + int back_porch; + int front_porch; + int pulse_width; +}; + +void da8xx_video_init(const struct da8xx_panel *panel, int bits_pixel); + +#endif /* ifndef DA8XX_FB_H */ + diff --git a/arch/arm/include/asm/arch-davinci/dm365_lowlevel.h b/arch/arm/include/asm/arch-davinci/dm365_lowlevel.h new file mode 100644 index 0000000..4986e82 --- /dev/null +++ b/arch/arm/include/asm/arch-davinci/dm365_lowlevel.h @@ -0,0 +1,41 @@ +/* + * SoC-specific lowlevel code for tms320dm365 and similar chips + * + * Copyright (C) 2011 + * Heiko Schocher, DENX Software Engineering, hs@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#ifndef __DM365_LOWLEVEL_H +#define __DM365_LOWLEVEL_H + +#include <common.h> +#include <asm/arch/hardware.h> +#include <asm/io.h> + +void dm365_waitloop(unsigned long loopcnt); +int dm365_pll1_init(unsigned long pllmult, unsigned long prediv); +int dm365_pll2_init(unsigned long pllm, unsigned long prediv); +int dm365_ddr_setup(void); +void dm365_por_reset(void); +void dm365_psc_init(void); +void dm365_pinmux_ctl(unsigned long offset, unsigned long mask, + unsigned long value); +void dm36x_lowlevel_init(ulong bootflag); + +#endif /* #ifndef __DM365_LOWLEVEL_H */ diff --git a/arch/arm/include/asm/arch-davinci/hardware.h b/arch/arm/include/asm/arch-davinci/hardware.h index 431e87b..bea1499 100644 --- a/arch/arm/include/asm/arch-davinci/hardware.h +++ b/arch/arm/include/asm/arch-davinci/hardware.h @@ -56,6 +56,7 @@ typedef volatile unsigned int * dv_reg_p; #define DAVINCI_DMA_3PTC1_BASE (0x01c10400) #define DAVINCI_UART0_BASE (0x01c20000) #define DAVINCI_UART1_BASE (0x01c20400) +#define DAVINCI_TIMER3_BASE (0x01c20800) #define DAVINCI_I2C_BASE (0x01c21000) #define DAVINCI_TIMER0_BASE (0x01c21400) #define DAVINCI_TIMER1_BASE (0x01c21800) @@ -63,6 +64,7 @@ typedef volatile unsigned int * dv_reg_p; #define DAVINCI_PWM0_BASE (0x01c22000) #define DAVINCI_PWM1_BASE (0x01c22400) #define DAVINCI_PWM2_BASE (0x01c22800) +#define DAVINCI_TIMER4_BASE (0x01c23800) #define DAVINCI_SYSTEM_MODULE_BASE (0x01c40000) #define DAVINCI_PLL_CNTRL0_BASE (0x01c40800) #define DAVINCI_PLL_CNTRL1_BASE (0x01c40c00) @@ -108,6 +110,9 @@ typedef volatile unsigned int * dv_reg_p; #define DAVINCI_MMC_SD1_BASE 0x01d00000 #define DAVINCI_ASYNC_EMIF_CNTRL_BASE 0x01d10000 #define DAVINCI_MMC_SD0_BASE 0x01d11000 +#define DAVINCI_DDR_EMIF_CTRL_BASE 0x20000000 +#define DAVINCI_SPI0_BASE 0x01c66000 +#define DAVINCI_SPI1_BASE 0x01c66800 #elif defined(CONFIG_SOC_DM646X) #define DAVINCI_ASYNC_EMIF_CNTRL_BASE 0x20008000 @@ -157,6 +162,7 @@ typedef volatile unsigned int * dv_reg_p; #define DAVINCI_DDR_EMIF_DATA_BASE 0xc0000000 #define DAVINCI_INTC_BASE 0xfffee000 #define DAVINCI_BOOTCFG_BASE 0x01c14000 +#define DAVINCI_LCD_CNTL_BASE 0x01e13000 #define DAVINCI_L3CBARAM_BASE 0x80000000 #define JTAG_ID_REG (DAVINCI_BOOTCFG_BASE + 0x18) #define CHIP_REV_ID_REG (DAVINCI_BOOTCFG_BASE + 0x24) @@ -171,6 +177,10 @@ typedef volatile unsigned int * dv_reg_p; #define GPIO_BANK2_REG_OPDATA_ADDR (DAVINCI_GPIO_BASE + 0x3c) #define GPIO_BANK2_REG_SET_ADDR (DAVINCI_GPIO_BASE + 0x40) #define GPIO_BANK2_REG_CLR_ADDR (DAVINCI_GPIO_BASE + 0x44) +#define GPIO_BANK6_REG_DIR_ADDR (DAVINCI_GPIO_BASE + 0x88) +#define GPIO_BANK6_REG_OPDATA_ADDR (DAVINCI_GPIO_BASE + 0x8c) +#define GPIO_BANK6_REG_SET_ADDR (DAVINCI_GPIO_BASE + 0x90) +#define GPIO_BANK6_REG_CLR_ADDR (DAVINCI_GPIO_BASE + 0x94) #endif /* CONFIG_SOC_DA8XX */ /* Power and Sleep Controller (PSC) Domains */ @@ -292,6 +302,7 @@ typedef volatile unsigned int * dv_reg_p; #endif /* CONFIG_SOC_DA8XX */ void lpsc_on(unsigned int id); +void lpsc_syncreset(unsigned int id); void dsp_on(void); void davinci_enable_uart0(void); @@ -358,6 +369,7 @@ struct davinci_psc_regs { #endif /* CONFIG_SOC_DA8XX */ #define PSC_MDSTAT_STATE 0x3f +#define PSC_MDCTL_NEXT 0x07 #ifndef CONFIG_SOC_DA8XX @@ -434,7 +446,8 @@ struct davinci_syscfg_regs { dv_reg rsvd[13]; dv_reg kick0; dv_reg kick1; - dv_reg rsvd1[56]; + dv_reg rsvd1[53]; + dv_reg mstpri[3]; dv_reg pinmux[20]; dv_reg suspsrc; dv_reg chipsig; @@ -454,7 +467,7 @@ struct davinci_syscfg_regs { #define DAVINCI_SYSCFG_SUSPSRC_I2C (1 << 16) #define DAVINCI_SYSCFG_SUSPSRC_SPI0 (1 << 21) #define DAVINCI_SYSCFG_SUSPSRC_SPI1 (1 << 22) -#define DAVINCI_SYSCFG_SUSPSRC_UART2 (1 << 20) +#define DAVINCI_SYSCFG_SUSPSRC_UART0 (1 << 18) #define DAVINCI_SYSCFG_SUSPSRC_TIMER0 (1 << 27) struct davinci_syscfg1_regs { @@ -541,4 +554,14 @@ static inline int get_async3_src(void) #endif /* CONFIG_SOC_DA8XX */ +#if defined(CONFIG_SOC_DM365) +#include <asm/arch/aintc_defs.h> +#include <asm/arch/ddr2_defs.h> +#include <asm/arch/emif_defs.h> +#include <asm/arch/gpio.h> +#include <asm/arch/pll_defs.h> +#include <asm/arch/psc_defs.h> +#include <asm/arch/syscfg_defs.h> +#include <asm/arch/timer_defs.h> +#endif #endif /* __ASM_ARCH_HARDWARE_H */ diff --git a/arch/arm/include/asm/arch-davinci/pll_defs.h b/arch/arm/include/asm/arch-davinci/pll_defs.h new file mode 100644 index 0000000..5c30953 --- /dev/null +++ b/arch/arm/include/asm/arch-davinci/pll_defs.h @@ -0,0 +1,84 @@ +/* + * Copyright (C) 2011 + * Heiko Schocher, DENX Software Engineering, hs@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef _DV_PLL_DEFS_H_ +#define _DV_PLL_DEFS_H_ + +struct dv_pll_regs { + unsigned int pid; /* 0x00 */ + unsigned char rsvd0[224]; /* 0x04 */ + unsigned int rstype; /* 0xe4 */ + unsigned char rsvd1[24]; /* 0xe8 */ + unsigned int pllctl; /* 0x100 */ + unsigned char rsvd2[4]; /* 0x104 */ + unsigned int secctl; /* 0x108 */ + unsigned int rv; /* 0x10c */ + unsigned int pllm; /* 0x110 */ + unsigned int prediv; /* 0x114 */ + unsigned int plldiv1; /* 0x118 */ + unsigned int plldiv2; /* 0x11c */ + unsigned int plldiv3; /* 0x120 */ + unsigned int oscdiv1; /* 0x124 */ + unsigned int postdiv; /* 0x128 */ + unsigned int bpdiv; /* 0x12c */ + unsigned char rsvd5[8]; /* 0x130 */ + unsigned int pllcmd; /* 0x138 */ + unsigned int pllstat; /* 0x13c */ + unsigned int alnctl; /* 0x140 */ + unsigned int dchange; /* 0x144 */ + unsigned int cken; /* 0x148 */ + unsigned int ckstat; /* 0x14c */ + unsigned int systat; /* 0x150 */ + unsigned char rsvd6[12]; /* 0x154 */ + unsigned int plldiv4; /* 0x160 */ + unsigned int plldiv5; /* 0x164 */ + unsigned int plldiv6; /* 0x168 */ + unsigned int plldiv7; /* 0x16C */ + unsigned int plldiv8; /* 0x170 */ + unsigned int plldiv9; /* 0x174 */ +}; + +#define PLLCTL_PLLEN (1 << 0) +#define PLLCTL_PLLPWRDN (1 << 1) +#define PLLCTL_PLLRST (1 << 3) +#define PLLCTL_PLLENSRC (1 << 5) +#define PLLCTL_RES_9 (1 << 8) + +#define PLLSECCTL_TINITZ (1 << 16) +#define PLLSECCTL_TENABLE (1 << 17) +#define PLLSECCTL_TENABLEDIV (1 << 18) +#define PLLSECCTL_STOPMODE (1 << 22) + +#define PLLCMD_GOSET (1 << 0) + +#define PLL0_LOCK 0x07000000 +#define PLL1_LOCK 0x07000000 + +#define dv_pll0_regs ((struct dv_pll_regs *)DAVINCI_PLL_CNTRL0_BASE) +#define dv_pll1_regs ((struct dv_pll_regs *)DAVINCI_PLL_CNTRL1_BASE) + +#define ARM_PLLDIV (offsetof(struct dv_pll_regs, plldiv2)) +#define DDR_PLLDIV (offsetof(struct dv_pll_regs, plldiv7)) +#define SPI_PLLDIV (offsetof(struct dv_pll_regs, plldiv4)) + +unsigned int davinci_clk_get(unsigned int div); +#endif /* _DV_PLL_DEFS_H_ */ diff --git a/arch/arm/include/asm/arch-davinci/psc_defs.h b/arch/arm/include/asm/arch-davinci/psc_defs.h new file mode 100644 index 0000000..084b015 --- /dev/null +++ b/arch/arm/include/asm/arch-davinci/psc_defs.h @@ -0,0 +1,86 @@ +/* + * Copyright (C) 2011 + * Heiko Schocher, DENX Software Engineering, hs@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef _DV_PSC_DEFS_H_ +#define _DV_PSC_DEFS_H_ + +/* + * Power/Sleep Ctrl Register structure + * See sprufb3.pdf, Chapter 7 + */ +struct dv_psc_regs { + unsigned int pid; /* 0x000 */ + unsigned char rsvd0[16]; /* 0x004 */ + unsigned char rsvd1[4]; /* 0x014 */ + unsigned int inteval; /* 0x018 */ + unsigned char rsvd2[36]; /* 0x01C */ + unsigned int merrpr0; /* 0x040 */ + unsigned int merrpr1; /* 0x044 */ + unsigned char rsvd3[8]; /* 0x048 */ + unsigned int merrcr0; /* 0x050 */ + unsigned int merrcr1; /* 0x054 */ + unsigned char rsvd4[8]; /* 0x058 */ + unsigned int perrpr; /* 0x060 */ + unsigned char rsvd5[4]; /* 0x064 */ + unsigned int perrcr; /* 0x068 */ + unsigned char rsvd6[4]; /* 0x06C */ + unsigned int epcpr; /* 0x070 */ + unsigned char rsvd7[4]; /* 0x074 */ + unsigned int epccr; /* 0x078 */ + unsigned char rsvd8[144]; /* 0x07C */ + unsigned char rsvd9[20]; /* 0x10C */ + unsigned int ptcmd; /* 0x120 */ + unsigned char rsvd10[4]; /* 0x124 */ + unsigned int ptstat; /* 0x128 */ + unsigned char rsvd11[212]; /* 0x12C */ + unsigned int pdstat0; /* 0x200 */ + unsigned int pdstat1; /* 0x204 */ + unsigned char rsvd12[248]; /* 0x208 */ + unsigned int pdctl0; /* 0x300 */ + unsigned int pdctl1; /* 0x304 */ + unsigned char rsvd13[536]; /* 0x308 */ + unsigned int mckout0; /* 0x520 */ + unsigned int mckout1; /* 0x524 */ + unsigned char rsvd14[728]; /* 0x528 */ + unsigned int mdstat[52]; /* 0x800 */ + unsigned char rsvd15[304]; /* 0x8D0 */ + unsigned int mdctl[52]; /* 0xA00 */ +}; + +/* PSC constants */ +#define EMURSTIE_MASK (0x00000200) + +#define PD0 (0) + +#define PSC_ENABLE (0x3) +#define PSC_DISABLE (0x2) +#define PSC_SYNCRESET (0x1) +#define PSC_SWRSTDISABLE (0x0) + +#define PSC_GOSTAT (1 << 0) +#define PSC_MD_STATE_MSK (0x1f) + +#define PSC_CMD_GO (1 << 0) + +#define dv_psc_regs ((struct dv_psc_regs *)DAVINCI_PWR_SLEEP_CNTRL_BASE) + +#endif /* _DV_PSC_DEFS_H_ */ diff --git a/arch/arm/include/asm/arch-davinci/syscfg_defs.h b/arch/arm/include/asm/arch-davinci/syscfg_defs.h new file mode 100644 index 0000000..05af020 --- /dev/null +++ b/arch/arm/include/asm/arch-davinci/syscfg_defs.h @@ -0,0 +1,66 @@ +/* + * Copyright (C) 2011 + * Heiko Schocher, DENX Software Engineering, hs@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef _DV_SYSCFG_DEFS_H_ +#define _DV_SYSCFG_DEFS_H_ + +#ifndef CONFIG_SOC_DA8XX +/* System Control Module register structure for DM365 */ +struct dv_sys_module_regs { + unsigned int pinmux[5]; /* 0x00 */ + unsigned int bootcfg; /* 0x14 */ + unsigned int arm_intmux; /* 0x18 */ + unsigned int edma_evtmux; /* 0x1C */ + unsigned int ddr_slew; /* 0x20 */ + unsigned int clkout; /* 0x24 */ + unsigned int device_id; /* 0x28 */ + unsigned int vdac_config; /* 0x2C */ + unsigned int timer64_ctl; /* 0x30 */ + unsigned int usbbphy_ctl; /* 0x34 */ + unsigned int misc; /* 0x38 */ + unsigned int mstpri[2]; /* 0x3C */ + unsigned int vpss_clkctl; /* 0x44 */ + unsigned int peri_clkctl; /* 0x48 */ + unsigned int deepsleep; /* 0x4C */ + unsigned int dft_enable; /* 0x50 */ + unsigned int debounce[8]; /* 0x54 */ + unsigned int vtpiocr; /* 0x74 */ + unsigned int pupdctl0; /* 0x78 */ + unsigned int pupdctl1; /* 0x7C */ + unsigned int hdimcopbt; /* 0x80 */ + unsigned int pll0_config; /* 0x84 */ + unsigned int pll1_config; /* 0x88 */ +}; + +#define VPTIO_RDY (1 << 15) +#define VPTIO_IOPWRDN (1 << 14) +#define VPTIO_CLRZ (1 << 13) +#define VPTIO_LOCK (1 << 7) +#define VPTIO_PWRDN (1 << 6) + +#define VPSS_CLK_CTL_VPSS_CLKMD (1 << 7) + +#define dv_sys_module_regs \ + ((struct dv_sys_module_regs *)DAVINCI_SYSTEM_MODULE_BASE) + +#endif /* !CONFIG_SOC_DA8XX */ +#endif /* _DV_SYSCFG_DEFS_H_ */ diff --git a/arch/arm/include/asm/arch-kirkwood/config.h b/arch/arm/include/asm/arch-kirkwood/config.h index f17f82d..d1c1998 100644 --- a/arch/arm/include/asm/arch-kirkwood/config.h +++ b/arch/arm/include/asm/arch-kirkwood/config.h @@ -41,7 +41,8 @@ #include <asm/arch/kirkwood.h> #define CONFIG_ARM926EJS 1 /* Basic Architecture */ - +#define CONFIG_SYS_CACHELINE_SIZE 32 + /* default Dcache Line length for kirkwood */ #define CONFIG_MD5 /* get_random_hex on krikwood needs MD5 support */ #define CONFIG_KIRKWOOD_EGIGA_INIT /* Enable GbePort0/1 for kernel */ #define CONFIG_KIRKWOOD_RGMII_PAD_1V8 /* Set RGMII Pad voltage to 1.8V */ diff --git a/arch/arm/include/asm/arch-mx31/clock.h b/arch/arm/include/asm/arch-mx31/clock.h index 2e3bce2..253a0e1 100644 --- a/arch/arm/include/asm/arch-mx31/clock.h +++ b/arch/arm/include/asm/arch-mx31/clock.h @@ -37,8 +37,10 @@ unsigned int mxc_get_clock(enum mxc_clock clk); extern u32 imx_get_uartclk(void); extern void mx31_gpio_mux(unsigned long mode); extern void mx31_set_pad(enum iomux_pins pin, u32 config); +extern void mx31_set_gpr(enum iomux_gp_func gp, char en); void mx31_uart1_hw_init(void); +void mx31_uart2_hw_init(void); void mx31_spi2_hw_init(void); void mxc_hw_watchdog_enable(void); void mxc_hw_watchdog_reset(void); diff --git a/arch/arm/include/asm/arch-mx31/imx-regs.h b/arch/arm/include/asm/arch-mx31/imx-regs.h index 552c821..afdaa1c 100644 --- a/arch/arm/include/asm/arch-mx31/imx-regs.h +++ b/arch/arm/include/asm/arch-mx31/imx-regs.h @@ -468,6 +468,44 @@ enum iomux_pins { MX31_PIN_CAPTURE = IOMUX_PIN(7, 327), }; +/* + * various IOMUX general purpose functions + */ +enum iomux_gp_func { + MUX_PGP_FIRI = 1 << 0, + MUX_DDR_MODE = 1 << 1, + MUX_PGP_CSPI_BB = 1 << 2, + MUX_PGP_ATA_1 = 1 << 3, + MUX_PGP_ATA_2 = 1 << 4, + MUX_PGP_ATA_3 = 1 << 5, + MUX_PGP_ATA_4 = 1 << 6, + MUX_PGP_ATA_5 = 1 << 7, + MUX_PGP_ATA_6 = 1 << 8, + MUX_PGP_ATA_7 = 1 << 9, + MUX_PGP_ATA_8 = 1 << 10, + MUX_PGP_UH2 = 1 << 11, + MUX_SDCTL_CSD0_SEL = 1 << 12, + MUX_SDCTL_CSD1_SEL = 1 << 13, + MUX_CSPI1_UART3 = 1 << 14, + MUX_EXTDMAREQ2_MBX_SEL = 1 << 15, + MUX_TAMPER_DETECT_EN = 1 << 16, + MUX_PGP_USB_4WIRE = 1 << 17, + MUX_PGP_USB_COMMON = 1 << 18, + MUX_SDHC_MEMSTICK1 = 1 << 19, + MUX_SDHC_MEMSTICK2 = 1 << 20, + MUX_PGP_SPLL_BYP = 1 << 21, + MUX_PGP_UPLL_BYP = 1 << 22, + MUX_PGP_MSHC1_CLK_SEL = 1 << 23, + MUX_PGP_MSHC2_CLK_SEL = 1 << 24, + MUX_CSPI3_UART5_SEL = 1 << 25, + MUX_PGP_ATA_9 = 1 << 26, + MUX_PGP_USB_SUSPEND = 1 << 27, + MUX_PGP_USB_OTG_LOOPBACK = 1 << 28, + MUX_PGP_USB_HS1_LOOPBACK = 1 << 29, + MUX_PGP_USB_HS2_LOOPBACK = 1 << 30, + MUX_CLKO_DDR_MODE = 1 << 31, +}; + /* Bit definitions for RCSR register in CCM */ #define CCM_RCSR_NF16B (1 << 31) #define CCM_RCSR_NFMS (1 << 30) @@ -484,6 +522,17 @@ struct mx31_weim { struct mx31_weim_cscr cscr[6]; }; +/* ESD control registers */ +struct esdc_regs { + u32 ctl0; + u32 cfg0; + u32 ctl1; + u32 cfg1; + u32 misc; + u32 dly[5]; + u32 dlyl; +}; + #endif #define __REG(x) (*((volatile u32 *)(x))) @@ -562,6 +611,8 @@ struct mx31_weim { #define ESDCTL_BL(x) ((x) << 7) #define ESDCTL_PRCT(x) ((x) << 0) +#define ESDCTL_BASE_ADDR 0xB8001000 + /* 13 fields of the upper CS control register */ #define CSCR_U(sp, wp, bcd, bcs, psz, pme, sync, dol, \ cnc, wsc, ew, wws, edc) \ @@ -642,12 +693,23 @@ struct mx31_weim { /* Register offsets based on IOMUXC_BASE */ /* 0x00 .. 0x7b */ +#define MUX_CTL_CSPI3_MISO 0x0c +#define MUX_CTL_CSPI3_SCLK 0x0d +#define MUX_CTL_CSPI3_SPI_RDY 0x0e +#define MUX_CTL_CSPI3_MOSI 0x13 + #define MUX_CTL_USBH2_DATA1 0x40 #define MUX_CTL_USBH2_DIR 0x44 #define MUX_CTL_USBH2_STP 0x45 #define MUX_CTL_USBH2_NXT 0x46 #define MUX_CTL_USBH2_DATA0 0x47 #define MUX_CTL_USBH2_CLK 0x4B + +#define MUX_CTL_TXD2 0x70 +#define MUX_CTL_RTS2 0x71 +#define MUX_CTL_CTS2 0x72 +#define MUX_CTL_RXD2 0x77 + #define MUX_CTL_RTS1 0x7c #define MUX_CTL_CTS1 0x7d #define MUX_CTL_DTR_DCE1 0x7e @@ -705,6 +767,11 @@ struct mx31_weim { #define MUX_RTS1__UART1_RTS_B IOMUX_MODE(MUX_CTL_RTS1, MUX_CTL_FUNC) #define MUX_CTS1__UART1_CTS_B IOMUX_MODE(MUX_CTL_CTS1, MUX_CTL_FUNC) +#define MUX_RXD2__UART2_RXD_MUX IOMUX_MODE(MUX_CTL_RXD2, MUX_CTL_FUNC) +#define MUX_TXD2__UART2_TXD_MUX IOMUX_MODE(MUX_CTL_TXD2, MUX_CTL_FUNC) +#define MUX_RTS2__UART2_RTS_B IOMUX_MODE(MUX_CTL_RTS2, MUX_CTL_FUNC) +#define MUX_CTS2__UART2_CTS_B IOMUX_MODE(MUX_CTL_CTS2, MUX_CTL_FUNC) + #define MUX_CSPI2_SS0__CSPI2_SS0_B IOMUX_MODE(MUX_CTL_CSPI2_SS0, MUX_CTL_FUNC) #define MUX_CSPI2_SS1__CSPI2_SS1_B IOMUX_MODE(MUX_CTL_CSPI2_SS1, MUX_CTL_FUNC) #define MUX_CSPI2_SS2__CSPI2_SS2_B IOMUX_MODE(MUX_CTL_CSPI2_SS2, MUX_CTL_FUNC) diff --git a/arch/arm/include/asm/arch-mx35/imx-regs.h b/arch/arm/include/asm/arch-mx35/imx-regs.h index 0c566f2..25c324e 100644 --- a/arch/arm/include/asm/arch-mx35/imx-regs.h +++ b/arch/arm/include/asm/arch-mx35/imx-regs.h @@ -147,6 +147,19 @@ #define PLL_MFI(x) (((x) & 0xf) << 10) #define PLL_MFN(x) (((x) & 0x3ff) << 0) +#define _PLL_BRM(x) ((x) << 31) +#define _PLL_PD(x) (((x) - 1) << 26) +#define _PLL_MFD(x) (((x) - 1) << 16) +#define _PLL_MFI(x) ((x) << 10) +#define _PLL_MFN(x) (x) +#define _PLL_SETTING(brm, pd, mfd, mfi, mfn) \ + (_PLL_BRM(brm) | _PLL_PD(pd) | _PLL_MFD(mfd) | _PLL_MFI(mfi) |\ + _PLL_MFN(mfn)) + +#define CCM_MPLL_532_HZ _PLL_SETTING(1, 1, 12, 11, 1) +#define CCM_MPLL_399_HZ _PLL_SETTING(0, 1, 16, 8, 5) +#define CCM_PPLL_300_HZ _PLL_SETTING(0, 1, 4, 6, 1) + #define CSCR_U(x) (WEIM_CTRL_CS#x + 0) #define CSCR_L(x) (WEIM_CTRL_CS#x + 4) #define CSCR_A(x) (WEIM_CTRL_CS#x + 8) @@ -284,6 +297,23 @@ struct wdog_regs { u16 wmcr; /* Misc Control */ }; +struct esdc_regs { + u32 esdctl0; + u32 esdcfg0; + u32 esdctl1; + u32 esdcfg1; + u32 esdmisc; + u32 reserved[4]; + u32 esdcdly[5]; + u32 esdcdlyl; +}; + +#define ESDC_MISC_RST (1 << 1) +#define ESDC_MISC_MDDR_EN (1 << 2) +#define ESDC_MISC_MDDR_DL_RST (1 << 3) +#define ESDC_MISC_DDR_EN (1 << 8) +#define ESDC_MISC_DDR2_EN (1 << 9) + /* * NFMS bit in RCSR register for pagesize of nandflash */ @@ -293,9 +323,5 @@ struct wdog_regs { #define CCM_RCSR_NF_16BIT_SEL (1 << 14) -extern unsigned int get_board_rev(void); -extern int is_soc_rev(int rev); -extern int sdhc_init(void); - #endif #endif /* __ASM_ARCH_MX35_H */ diff --git a/arch/arm/include/asm/arch-mx35/lowlevel_macro.S b/arch/arm/include/asm/arch-mx35/lowlevel_macro.S new file mode 100644 index 0000000..05aa951 --- /dev/null +++ b/arch/arm/include/asm/arch-mx35/lowlevel_macro.S @@ -0,0 +1,140 @@ +/* + * Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de> + * + * (C) Copyright 2008-2010 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * AIPS setup - Only setup MPROTx registers. + * The PACR default values are good. + */ +.macro init_aips + /* + * Set all MPROTx to be non-bufferable, trusted for R/W, + * not forced to user-mode. + */ + ldr r0, =AIPS1_BASE_ADDR + ldr r1, =AIPS_MPR_CONFIG + str r1, [r0, #0x00] + str r1, [r0, #0x04] + ldr r0, =AIPS2_BASE_ADDR + str r1, [r0, #0x00] + str r1, [r0, #0x04] + + /* + * Clear the on and off peripheral modules Supervisor Protect bit + * for SDMA to access them. Did not change the AIPS control registers + * (offset 0x20) access type + */ + ldr r0, =AIPS1_BASE_ADDR + ldr r1, =AIPS_OPACR_CONFIG + str r1, [r0, #0x40] + str r1, [r0, #0x44] + str r1, [r0, #0x48] + str r1, [r0, #0x4C] + str r1, [r0, #0x50] + ldr r0, =AIPS2_BASE_ADDR + str r1, [r0, #0x40] + str r1, [r0, #0x44] + str r1, [r0, #0x48] + str r1, [r0, #0x4C] + str r1, [r0, #0x50] +.endm + +/* MAX (Multi-Layer AHB Crossbar Switch) setup */ +.macro init_max + ldr r0, =MAX_BASE_ADDR + /* MPR - priority is M4 > M2 > M3 > M5 > M0 > M1 */ + ldr r1, =MAX_MPR_CONFIG + str r1, [r0, #0x000] /* for S0 */ + str r1, [r0, #0x100] /* for S1 */ + str r1, [r0, #0x200] /* for S2 */ + str r1, [r0, #0x300] /* for S3 */ + str r1, [r0, #0x400] /* for S4 */ + /* SGPCR - always park on last master */ + ldr r1, =MAX_SGPCR_CONFIG + str r1, [r0, #0x010] /* for S0 */ + str r1, [r0, #0x110] /* for S1 */ + str r1, [r0, #0x210] /* for S2 */ + str r1, [r0, #0x310] /* for S3 */ + str r1, [r0, #0x410] /* for S4 */ + /* MGPCR - restore default values */ + ldr r1, =MAX_MGPCR_CONFIG + str r1, [r0, #0x800] /* for M0 */ + str r1, [r0, #0x900] /* for M1 */ + str r1, [r0, #0xA00] /* for M2 */ + str r1, [r0, #0xB00] /* for M3 */ + str r1, [r0, #0xC00] /* for M4 */ + str r1, [r0, #0xD00] /* for M5 */ +.endm + +/* M3IF setup */ +.macro init_m3if + /* Configure M3IF registers */ + ldr r1, =M3IF_BASE_ADDR + /* + * M3IF Control Register (M3IFCTL) + * MRRP[0] = L2CC0 not on priority list (0 << 0) = 0x00000000 + * MRRP[1] = L2CC1 not on priority list (0 << 0) = 0x00000000 + * MRRP[2] = MBX not on priority list (0 << 0) = 0x00000000 + * MRRP[3] = MAX1 not on priority list (0 << 0) = 0x00000000 + * MRRP[4] = SDMA not on priority list (0 << 0) = 0x00000000 + * MRRP[5] = MPEG4 not on priority list (0 << 0) = 0x00000000 + * MRRP[6] = IPU1 on priority list (1 << 6) = 0x00000040 + * MRRP[7] = IPU2 not on priority list (0 << 0) = 0x00000000 + * ------------ + * 0x00000040 + */ + ldr r0, =M3IF_CONFIG + str r0, [r1] /* M3IF control reg */ +.endm + +.macro core_init + mrc 15, 0, r1, c1, c0, 0 + + mrc 15, 0, r0, c1, c0, 1 + orr r0, r0, #7 + mcr 15, 0, r0, c1, c0, 1 + orr r1, r1, #(1<<11) + + /* Set unaligned access enable */ + orr r1, r1, #(1<<22) + + /* Set low int latency enable */ + orr r1, r1, #(1<<21) + + mcr 15, 0, r1, c1, c0, 0 + + mov r0, #0 + + /* Set branch prediction enable */ + mcr 15, 0, r0, c15, c2, 4 + + mcr 15, 0, r0, c7, c7, 0 /* invalidate I cache and D cache */ + mcr 15, 0, r0, c8, c7, 0 /* invalidate TLBs */ + mcr 15, 0, r0, c7, c10, 4 /* Drain the write buffer */ + + /* + * initializes very early AIPS + * Then it also initializes Multi-Layer AHB Crossbar Switch, + * M3IF + * Also setup the Peripheral Port Remap register inside the core + */ + ldr r0, =0x40000015 /* start from AIPS 2GB region */ + mcr p15, 0, r0, c15, c2, 4 +.endm diff --git a/arch/arm/include/asm/arch-mx35/mx35_pins.h b/arch/arm/include/asm/arch-mx35/mx35_pins.h index 14669ff..3676e33 100644 --- a/arch/arm/include/asm/arch-mx35/mx35_pins.h +++ b/arch/arm/include/asm/arch-mx35/mx35_pins.h @@ -349,6 +349,9 @@ typedef enum iomux_pins { MX35_PIN_FEC_TDATA2 = _MXC_BUILD_GPIO_PIN(2, 21, 0x31C, 0x780), MX35_PIN_FEC_RDATA3 = _MXC_BUILD_GPIO_PIN(2, 22, 0x320, 0x784), MX35_PIN_FEC_TDATA3 = _MXC_BUILD_GPIO_PIN(2, 23, 0x324, 0x788), + + MX35_PIN_RTS2_UART3_RXD_MUX = _MXC_BUILD_NON_GPIO_PIN(0x1a0, 0x5e4), + MX35_PIN_CTS2_UART3_TXD_MUX = _MXC_BUILD_NON_GPIO_PIN(0x1a4, 0x5e8), } iomux_pin_name_t; #endif diff --git a/arch/arm/include/asm/arch-omap3/mem.h b/arch/arm/include/asm/arch-omap3/mem.h index 8e28f77..db6a696 100644 --- a/arch/arm/include/asm/arch-omap3/mem.h +++ b/arch/arm/include/asm/arch-omap3/mem.h @@ -54,79 +54,89 @@ enum { #define SDP_SDRC_DLLAB_CTRL ((DLL_ENADLL << 3) | \ (DLL_LOCKDLL << 2) | (DLL_DLLPHASE_90 << 1)) -/* Infineon part of 3430SDP (165MHz optimized) 6.06ns - * ACTIMA - * TDAL = Twr/Tck + Trp/tck = 15/6 + 18/6 = 2.5 + 3 = 5.5 -> 6 - * TDPL (Twr) = 15/6 = 2.5 -> 3 - * TRRD = 12/6 = 2 - * TRCD = 18/6 = 3 - * TRP = 18/6 = 3 - * TRAS = 42/6 = 7 - * TRC = 60/6 = 10 - * TRFC = 72/6 = 12 - * ACTIMB - * TCKE = 2 - * XSR = 120/6 = 20 - */ -#define INFINEON_TDAL_165 6 -#define INFINEON_TDPL_165 3 -#define INFINEON_TRRD_165 2 -#define INFINEON_TRCD_165 3 -#define INFINEON_TRP_165 3 -#define INFINEON_TRAS_165 7 -#define INFINEON_TRC_165 10 -#define INFINEON_TRFC_165 12 -#define INFINEON_V_ACTIMA_165 ((INFINEON_TRFC_165 << 27) | \ - (INFINEON_TRC_165 << 22) | (INFINEON_TRAS_165 << 18) | \ - (INFINEON_TRP_165 << 15) | (INFINEON_TRCD_165 << 12) | \ - (INFINEON_TRRD_165 << 9) | (INFINEON_TDPL_165 << 6) | \ - (INFINEON_TDAL_165)) +/* Helper macros to arrive at value of the SDRC_ACTIM_CTRLA register. */ +#define ACTIM_CTRLA_TRFC(v) (((v) & 0x1F) << 27) /* 31:27 */ +#define ACTIM_CTRLA_TRC(v) (((v) & 0x1F) << 22) /* 26:22 */ +#define ACTIM_CTRLA_TRAS(v) (((v) & 0x0F) << 18) /* 21:18 */ +#define ACTIM_CTRLA_TRP(v) (((v) & 0x07) << 15) /* 17:15 */ +#define ACTIM_CTRLA_TRCD(v) (((v) & 0x07) << 12) /* 14:12 */ +#define ACTIM_CTRLA_TRRD(v) (((v) & 0x07) << 9) /* 11:9 */ +#define ACTIM_CTRLA_TDPL(v) (((v) & 0x07) << 6) /* 8:6 */ +#define ACTIM_CTRLA_TDAL(v) (v & 0x1F) /* 4:0 */ + +#define ACTIM_CTRLA(a,b,c,d,e,f,g,h) \ + ACTIM_CTRLA_TRFC(a) | \ + ACTIM_CTRLA_TRC(b) | \ + ACTIM_CTRLA_TRAS(b) | \ + ACTIM_CTRLA_TRP(d) | \ + ACTIM_CTRLA_TRCD(e) | \ + ACTIM_CTRLA_TRRD(f) | \ + ACTIM_CTRLA_TDPL(g) | \ + ACTIM_CTRLA_TDAL(h) + +/* Helper macros to arrive at value of the SDRC_ACTIM_CTRLB register. */ +#define ACTIM_CTRLB_TWTR(v) (((v) & 0x03) << 16) /* 17:16 */ +#define ACTIM_CTRLB_TCKE(v) (((v) & 0x07) << 12) /* 14:12 */ +#define ACTIM_CTRLB_TXP(v) (((v) & 0x07) << 8) /* 10:8 */ +#define ACTIM_CTRLB_TXSR(v) (v & 0xFF) /* 7:0 */ + +#define ACTIM_CTRLB(a,b,c,d) \ + ACTIM_CTRLB_TWTR(a) | \ + ACTIM_CTRLB_TCKE(b) | \ + ACTIM_CTRLB_TXP(b) | \ + ACTIM_CTRLB_TXSR(d) + +/* Infineon part of 3430SDP (165MHz optimized) 6.06ns */ +#define INFINEON_TDAL_165 6 /* Twr/Tck + Trp/tck */ + /* 15/6 + 18/6 = 5.5 -> 6 */ +#define INFINEON_TDPL_165 3 /* 15/6 = 2.5 -> 3 (Twr) */ +#define INFINEON_TRRD_165 2 /* 12/6 = 2 */ +#define INFINEON_TRCD_165 3 /* 18/6 = 3 */ +#define INFINEON_TRP_165 3 /* 18/6 = 3 */ +#define INFINEON_TRAS_165 7 /* 42/6 = 7 */ +#define INFINEON_TRC_165 10 /* 60/6 = 10 */ +#define INFINEON_TRFC_165 12 /* 72/6 = 12 */ + +#define INFINEON_V_ACTIMA_165 \ + ACTIM_CTRLA(INFINEON_TRFC_165, INFINEON_TRC_165, \ + INFINEON_TRAS_165, INFINEON_TRP_165, \ + INFINEON_TRCD_165, INFINEON_TRRD_165, \ + INFINEON_TDPL_165, INFINEON_TDAL_165) #define INFINEON_TWTR_165 1 #define INFINEON_TCKE_165 2 #define INFINEON_TXP_165 2 -#define INFINEON_XSR_165 20 -#define INFINEON_V_ACTIMB_165 ((INFINEON_TCKE_165 << 12) | \ - (INFINEON_XSR_165 << 0) | (INFINEON_TXP_165 << 8) | \ - (INFINEON_TWTR_165 << 16)) - -/* Micron part of 3430 EVM (165MHz optimized) 6.06ns - * ACTIMA - * TDAL = Twr/Tck + Trp/tck= 15/6 + 18 /6 = 2.5 + 3 = 5.5 -> 6 - * TDPL (Twr) = 15/6 = 2.5 -> 3 - * TRRD = 12/6 = 2 - * TRCD = 18/6 = 3 - * TRP = 18/6 = 3 - * TRAS = 42/6 = 7 - * TRC = 60/6 = 10 - * TRFC = 125/6 = 21 - * ACTIMB - * TWTR = 1 - * TCKE = 1 - * TXSR = 138/6 = 23 - * TXP = 25/6 = 4.1 ~5 - */ -#define MICRON_TDAL_165 6 -#define MICRON_TDPL_165 3 -#define MICRON_TRRD_165 2 -#define MICRON_TRCD_165 3 -#define MICRON_TRP_165 3 -#define MICRON_TRAS_165 7 -#define MICRON_TRC_165 10 -#define MICRON_TRFC_165 21 -#define MICRON_V_ACTIMA_165 ((MICRON_TRFC_165 << 27) | \ - (MICRON_TRC_165 << 22) | (MICRON_TRAS_165 << 18) | \ - (MICRON_TRP_165 << 15) | (MICRON_TRCD_165 << 12) | \ - (MICRON_TRRD_165 << 9) | (MICRON_TDPL_165 << 6) | \ - (MICRON_TDAL_165)) +#define INFINEON_XSR_165 20 /* 120/6 = 20 */ + +#define INFINEON_V_ACTIMB_165 \ + ACTIM_CTRLB(INFINEON_TWTR_165, INFINEON_TCKE_165, \ + INFINEON_TXP_165, INFINEON_XSR_165) + +/* Micron part of 3430 EVM (165MHz optimized) 6.06ns */ +#define MICRON_TDAL_165 6 /* Twr/Tck + Trp/tck */ + /* 15/6 + 18/6 = 5.5 -> 6 */ +#define MICRON_TDPL_165 3 /* 15/6 = 2.5 -> 3 (Twr) */ +#define MICRON_TRRD_165 2 /* 12/6 = 2 */ +#define MICRON_TRCD_165 3 /* 18/6 = 3 */ +#define MICRON_TRP_165 3 /* 18/6 = 3 */ +#define MICRON_TRAS_165 7 /* 42/6 = 7 */ +#define MICRON_TRC_165 10 /* 60/6 = 10 */ +#define MICRON_TRFC_165 21 /* 125/6 = 21 */ + +#define MICRON_V_ACTIMA_165 \ + ACTIM_CTRLA(MICRON_TRFC_165, MICRON_TRC_165, \ + MICRON_TRAS_165, MICRON_TRP_165, \ + MICRON_TRCD_165, MICRON_TRRD_165, \ + MICRON_TDPL_165, MICRON_TDAL_165) #define MICRON_TWTR_165 1 #define MICRON_TCKE_165 1 -#define MICRON_XSR_165 23 -#define MICRON_TXP_165 5 -#define MICRON_V_ACTIMB_165 ((MICRON_TCKE_165 << 12) | \ - (MICRON_XSR_165 << 0) | (MICRON_TXP_165 << 8) | \ - (MICRON_TWTR_165 << 16)) +#define MICRON_XSR_165 23 /* 138/6 = 23 */ +#define MICRON_TXP_165 5 /* 25/6 = 4.1 => ~5 */ + +#define MICRON_V_ACTIMB_165 \ + ACTIM_CTRLB(MICRON_TWTR_165, MICRON_TCKE_165, \ + MICRON_TXP_165, MICRON_XSR_165) #define MICRON_RAMTYPE 0x1 #define MICRON_DDRTYPE 0x0 @@ -155,61 +165,48 @@ enum { #define MICRON_V_MR ((MICRON_WBST << 9) | (MICRON_CASL << 4) | \ (MICRON_SIL << 3) | (MICRON_BL)) -/* - * NUMONYX part of IGEP v2 (165MHz optimized) 6.06ns - * ACTIMA - * TDAL = Twr/Tck + Trp/tck = 15/6 + 18/6 = 2.5 + 3 = 5.5 -> 6 - * TDPL (Twr) = 15/6 = 2.5 -> 3 - * TRRD = 12/6 = 2 - * TRCD = 22.5/6 = 3.75 -> 4 - * TRP = 18/6 = 3 - * TRAS = 42/6 = 7 - * TRC = 60/6 = 10 - * TRFC = 140/6 = 23.3 -> 24 - * ACTIMB - * TWTR = 2 - * TCKE = 2 - * TXSR = 200/6 = 33.3 -> 34 - * TXP = 1.0 + 1.1 = 2.1 -> 3 - */ -#define NUMONYX_TDAL_165 6 -#define NUMONYX_TDPL_165 3 -#define NUMONYX_TRRD_165 2 -#define NUMONYX_TRCD_165 4 -#define NUMONYX_TRP_165 3 -#define NUMONYX_TRAS_165 7 -#define NUMONYX_TRC_165 10 -#define NUMONYX_TRFC_165 24 -#define NUMONYX_V_ACTIMA_165 ((NUMONYX_TRFC_165 << 27) | \ - (NUMONYX_TRC_165 << 22) | (NUMONYX_TRAS_165 << 18) | \ - (NUMONYX_TRP_165 << 15) | (NUMONYX_TRCD_165 << 12) | \ - (NUMONYX_TRRD_165 << 9) | (NUMONYX_TDPL_165 << 6) | \ - (NUMONYX_TDAL_165)) - -#define NUMONYX_TWTR_165 2 -#define NUMONYX_TCKE_165 2 -#define NUMONYX_TXP_165 3 -#define NUMONYX_XSR_165 34 -#define NUMONYX_V_ACTIMB_165 ((NUMONYX_TCKE_165 << 12) | \ - (NUMONYX_XSR_165 << 0) | (NUMONYX_TXP_165 << 8) | \ - (NUMONYX_TWTR_165 << 16)) +/* NUMONYX part of IGEP v2 (165MHz optimized) 6.06ns */ +#define NUMONYX_TDAL_165 6 /* Twr/Tck + Trp/tck */ + /* 15/6 + 18/6 = 5.5 -> 6 */ +#define NUMONYX_TDPL_165 3 /* 15/6 = 2.5 -> 3 (Twr) */ +#define NUMONYX_TRRD_165 2 /* 12/6 = 2 */ +#define NUMONYX_TRCD_165 4 /* 22.5/6 = 3.75 -> 4 */ +#define NUMONYX_TRP_165 3 /* 18/6 = 3 */ +#define NUMONYX_TRAS_165 7 /* 42/6 = 7 */ +#define NUMONYX_TRC_165 10 /* 60/6 = 10 */ +#define NUMONYX_TRFC_165 24 /* 140/6 = 23.3 -> 24 */ + +#define NUMONYX_V_ACTIMA_165 \ + ACTIM_CTRLA(NUMONYX_TRFC_165, NUMONYX_TRC_165, \ + NUMONYX_TRAS_165, NUMONYX_TRP_165, \ + NUMONYX_TRCD_165, NUMONYX_TRRD_165, \ + NUMONYX_TDPL_165, NUMONYX_TDAL_165) + +#define NUMONYX_TWTR_165 2 +#define NUMONYX_TCKE_165 2 +#define NUMONYX_TXP_165 3 /* 200/6 = 33.3 -> 34 */ +#define NUMONYX_XSR_165 34 /* 1.0 + 1.1 = 2.1 -> 3 */ + +#define NUMONYX_V_ACTIMB_165 \ + ACTIM_CTRLB(NUMONYX_TWTR_165, NUMONYX_TCKE_165, \ + NUMONYX_TXP_165, NUMONYX_XSR_165) #ifdef CONFIG_OMAP3_INFINEON_DDR -#define V_ACTIMA_165 INFINEON_V_ACTIMA_165 -#define V_ACTIMB_165 INFINEON_V_ACTIMB_165 +#define V_ACTIMA_165 INFINEON_V_ACTIMA_165 +#define V_ACTIMB_165 INFINEON_V_ACTIMB_165 #endif #ifdef CONFIG_OMAP3_MICRON_DDR -#define V_ACTIMA_165 MICRON_V_ACTIMA_165 -#define V_ACTIMB_165 MICRON_V_ACTIMB_165 +#define V_ACTIMA_165 MICRON_V_ACTIMA_165 +#define V_ACTIMB_165 MICRON_V_ACTIMB_165 #define V_MCFG MICRON_V_MCFG #define V_RFR_CTRL MICRON_V_RFR_CTRL #define V_MR MICRON_V_MR #endif #ifdef CONFIG_OMAP3_NUMONYX_DDR -#define V_ACTIMA_165 NUMONYX_V_ACTIMA_165 -#define V_ACTIMB_165 NUMONYX_V_ACTIMB_165 +#define V_ACTIMA_165 NUMONYX_V_ACTIMA_165 +#define V_ACTIMB_165 NUMONYX_V_ACTIMB_165 #endif #if !defined(V_ACTIMA_165) || !defined(V_ACTIMB_165) diff --git a/arch/arm/include/asm/arch-pantheon/config.h b/arch/arm/include/asm/arch-pantheon/config.h index d10583d..e4fce7d 100644 --- a/arch/arm/include/asm/arch-pantheon/config.h +++ b/arch/arm/include/asm/arch-pantheon/config.h @@ -28,6 +28,8 @@ #include <asm/arch/pantheon.h> #define CONFIG_ARM926EJS 1 /* Basic Architecture */ +/* default Dcache Line length for pantheon */ +#define CONFIG_SYS_CACHELINE_SIZE 32 #define CONFIG_SYS_TCLK (14745600) /* NS16550 clk config */ #define CONFIG_SYS_HZ_CLOCK (3250000) /* Timer Freq. 3.25MHZ */ diff --git a/board/CarMediaLab/flea3/Makefile b/board/CarMediaLab/flea3/Makefile new file mode 100644 index 0000000..f5ad494 --- /dev/null +++ b/board/CarMediaLab/flea3/Makefile @@ -0,0 +1,49 @@ +# +# Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de> +# +# (C) Copyright 2008-2009 Freescale Semiconductor, Inc. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).o + +COBJS := flea3.o +SOBJS := lowlevel_init.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(call cmd_link_o_target, $(OBJS) $(SOBJS)) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/CarMediaLab/flea3/flea3.c b/board/CarMediaLab/flea3/flea3.c new file mode 100644 index 0000000..64f4b57 --- /dev/null +++ b/board/CarMediaLab/flea3/flea3.c @@ -0,0 +1,289 @@ +/* + * Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de> + * + * (C) Copyright 2008-2010 Freescale Semiconductor, Inc. + * + * Copyright (C) 2011, Stefano Babic <sbabic@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/errno.h> +#include <asm/arch/imx-regs.h> +#include <asm/arch/crm_regs.h> +#include <asm/arch/mx35_pins.h> +#include <asm/arch/iomux.h> +#include <i2c.h> +#include <linux/types.h> +#include <asm/gpio.h> +#include <asm/arch/sys_proto.h> +#include <netdev.h> + +#ifndef CONFIG_BOARD_EARLY_INIT_F +#error "CONFIG_BOARD_EARLY_INIT_F must be set for this board" +#endif + +#define CCM_CCMR_CONFIG 0x003F4208 + +#define ESDCTL_DDR2_CONFIG 0x007FFC3F +#define ESDCTL_0x92220000 0x92220000 +#define ESDCTL_0xA2220000 0xA2220000 +#define ESDCTL_0xB2220000 0xB2220000 +#define ESDCTL_0x82228080 0x82228080 +#define ESDCTL_DDR2_EMR2 0x04000000 +#define ESDCTL_DDR2_EMR3 0x06000000 +#define ESDCTL_PRECHARGE 0x00000400 +#define ESDCTL_DDR2_EN_DLL 0x02000400 +#define ESDCTL_DDR2_RESET_DLL 0x00000333 +#define ESDCTL_DDR2_MR 0x00000233 +#define ESDCTL_DDR2_OCD_DEFAULT 0x02000780 +#define ESDCTL_DELAY_LINE5 0x00F49F00 + +static inline void dram_wait(unsigned int count) +{ + volatile unsigned int wait = count; + + while (wait--) + ; +} + +DECLARE_GLOBAL_DATA_PTR; + +int dram_init(void) +{ + gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1, + PHYS_SDRAM_1_SIZE); + + return 0; +} + +static void board_setup_sdram_bank(u32 start_address) + +{ + struct esdc_regs *esdc = (struct esdc_regs *)ESDCTL_BASE_ADDR; + u32 *cfg_reg, *ctl_reg; + u32 val; + + switch (start_address) { + case CSD0_BASE_ADDR: + cfg_reg = &esdc->esdcfg0; + ctl_reg = &esdc->esdctl0; + break; + case CSD1_BASE_ADDR: + cfg_reg = &esdc->esdcfg1; + ctl_reg = &esdc->esdctl1; + break; + default: + return; + } + + /* Initialize MISC register for DDR2 */ + val = ESDC_MISC_RST | ESDC_MISC_MDDR_EN | ESDC_MISC_MDDR_DL_RST | + ESDC_MISC_DDR_EN | ESDC_MISC_DDR2_EN; + writel(val, &esdc->esdmisc); + val &= ~(ESDC_MISC_RST | ESDC_MISC_MDDR_DL_RST); + writel(val, &esdc->esdmisc); + + /* + * according to DDR2 specs, wait a while before + * the PRECHARGE_ALL command + */ + dram_wait(0x20000); + + /* Load DDR2 config and timing */ + writel(ESDCTL_DDR2_CONFIG, cfg_reg); + + /* Precharge ALL */ + writel(ESDCTL_0x92220000, + ctl_reg); + writel(0xda, start_address + ESDCTL_PRECHARGE); + + /* Load mode */ + writel(ESDCTL_0xB2220000, + ctl_reg); + writeb(0xda, start_address + ESDCTL_DDR2_EMR2); /* EMRS2 */ + writeb(0xda, start_address + ESDCTL_DDR2_EMR3); /* EMRS3 */ + writeb(0xda, start_address + ESDCTL_DDR2_EN_DLL); /* Enable DLL */ + writeb(0xda, start_address + ESDCTL_DDR2_RESET_DLL); /* Reset DLL */ + + /* Precharge ALL */ + writel(ESDCTL_0x92220000, + ctl_reg); + writel(0xda, start_address + ESDCTL_PRECHARGE); + + /* Set mode auto refresh : at least two refresh are required */ + writel(ESDCTL_0xA2220000, + ctl_reg); + writel(0xda, start_address); + writel(0xda, start_address); + + writel(ESDCTL_0xB2220000, + ctl_reg); + writeb(0xda, start_address + ESDCTL_DDR2_MR); + writeb(0xda, start_address + ESDCTL_DDR2_OCD_DEFAULT); + + /* OCD mode exit */ + writeb(0xda, start_address + ESDCTL_DDR2_EN_DLL); /* Enable DLL */ + + /* Set normal mode */ + writel(ESDCTL_0x82228080, + ctl_reg); + + dram_wait(0x20000); + + /* Do not set delay lines, only for MDDR */ +} + +static void board_setup_sdram(void) +{ + struct esdc_regs *esdc = (struct esdc_regs *)ESDCTL_BASE_ADDR; + + /* Initialize with default values both CSD0/1 */ + writel(0x2000, &esdc->esdctl0); + writel(0x2000, &esdc->esdctl1); + + board_setup_sdram_bank(CSD1_BASE_ADDR); +} + +static void setup_iomux_uart3(void) +{ + mxc_request_iomux(MX35_PIN_RTS2_UART3_RXD_MUX, MUX_CONFIG_ALT7); + mxc_request_iomux(MX35_PIN_CTS2_UART3_TXD_MUX, MUX_CONFIG_ALT7); +} + +static void setup_iomux_i2c(void) +{ + int pad; + + mxc_request_iomux(MX35_PIN_I2C1_CLK, MUX_CONFIG_SION); + mxc_request_iomux(MX35_PIN_I2C1_DAT, MUX_CONFIG_SION); + + pad = (PAD_CTL_HYS_SCHMITZ | PAD_CTL_PKE_ENABLE \ + | PAD_CTL_PUE_PUD | PAD_CTL_ODE_OpenDrain); + + mxc_iomux_set_pad(MX35_PIN_I2C1_CLK, pad); + mxc_iomux_set_pad(MX35_PIN_I2C1_DAT, pad); + + mxc_request_iomux(MX35_PIN_TX3_RX2, MUX_CONFIG_ALT1); + mxc_request_iomux(MX35_PIN_TX2_RX3, MUX_CONFIG_ALT1); + + mxc_iomux_set_pad(MX35_PIN_TX3_RX2, pad); + mxc_iomux_set_pad(MX35_PIN_TX2_RX3, pad); +} + + +static void setup_iomux_spi(void) +{ + mxc_request_iomux(MX35_PIN_CSPI1_MOSI, MUX_CONFIG_SION); + mxc_request_iomux(MX35_PIN_CSPI1_MISO, MUX_CONFIG_SION); + mxc_request_iomux(MX35_PIN_CSPI1_SS0, MUX_CONFIG_SION); + mxc_request_iomux(MX35_PIN_CSPI1_SS1, MUX_CONFIG_SION); + mxc_request_iomux(MX35_PIN_CSPI1_SCLK, MUX_CONFIG_SION); +} + +static void setup_iomux_fec(void) +{ + /* setup pins for FEC */ + mxc_request_iomux(MX35_PIN_FEC_TX_CLK, MUX_CONFIG_FUNC); + mxc_request_iomux(MX35_PIN_FEC_RX_CLK, MUX_CONFIG_FUNC); + mxc_request_iomux(MX35_PIN_FEC_RX_DV, MUX_CONFIG_FUNC); + mxc_request_iomux(MX35_PIN_FEC_COL, MUX_CONFIG_FUNC); + mxc_request_iomux(MX35_PIN_FEC_RDATA0, MUX_CONFIG_FUNC); + mxc_request_iomux(MX35_PIN_FEC_TDATA0, MUX_CONFIG_FUNC); + mxc_request_iomux(MX35_PIN_FEC_TX_EN, MUX_CONFIG_FUNC); + mxc_request_iomux(MX35_PIN_FEC_MDC, MUX_CONFIG_FUNC); + mxc_request_iomux(MX35_PIN_FEC_MDIO, MUX_CONFIG_FUNC); + mxc_request_iomux(MX35_PIN_FEC_TX_ERR, MUX_CONFIG_FUNC); + mxc_request_iomux(MX35_PIN_FEC_RX_ERR, MUX_CONFIG_FUNC); + mxc_request_iomux(MX35_PIN_FEC_CRS, MUX_CONFIG_FUNC); + mxc_request_iomux(MX35_PIN_FEC_RDATA1, MUX_CONFIG_FUNC); + mxc_request_iomux(MX35_PIN_FEC_TDATA1, MUX_CONFIG_FUNC); + mxc_request_iomux(MX35_PIN_FEC_RDATA2, MUX_CONFIG_FUNC); + mxc_request_iomux(MX35_PIN_FEC_TDATA2, MUX_CONFIG_FUNC); + mxc_request_iomux(MX35_PIN_FEC_RDATA3, MUX_CONFIG_FUNC); + mxc_request_iomux(MX35_PIN_FEC_TDATA3, MUX_CONFIG_FUNC); + +} + +int board_early_init_f(void) +{ + struct ccm_regs *ccm = + (struct ccm_regs *)IMX_CCM_BASE; + + /* setup GPIO3_1 to set HighVCore signal */ + mxc_request_iomux(MX35_PIN_ATA_DATA1, MUX_CONFIG_ALT5); + gpio_direction_output(65, 1); + + /* initialize PLL and clock configuration */ + writel(CCM_CCMR_CONFIG, &ccm->ccmr); + + writel(CCM_MPLL_532_HZ, &ccm->mpctl); + writel(CCM_PPLL_300_HZ, &ccm->ppctl); + + /* Set the core to run at 532 Mhz */ + writel(0x00001000, &ccm->pdr0); + + /* Set-up RAM */ + board_setup_sdram(); + + /* enable clocks */ + writel(readl(&ccm->cgr0) | + MXC_CCM_CGR0_EMI_MASK | + MXC_CCM_CGR0_EDI0_MASK | + MXC_CCM_CGR0_EPIT1_MASK, + &ccm->cgr0); + + writel(readl(&ccm->cgr1) | + MXC_CCM_CGR1_FEC_MASK | + MXC_CCM_CGR1_GPIO1_MASK | + MXC_CCM_CGR1_GPIO2_MASK | + MXC_CCM_CGR1_GPIO3_MASK | + MXC_CCM_CGR1_I2C1_MASK | + MXC_CCM_CGR1_I2C2_MASK | + MXC_CCM_CGR1_I2C3_MASK, + &ccm->cgr1); + + /* Set-up NAND */ + __raw_writel(readl(&ccm->rcsr) | MXC_CCM_RCSR_NFC_FMS, &ccm->rcsr); + + /* Set pinmux for the required peripherals */ + setup_iomux_uart3(); + setup_iomux_i2c(); + setup_iomux_fec(); + setup_iomux_spi(); + + return 0; +} + +int board_init(void) +{ + /* address of boot parameters */ + gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; + + return 0; +} + +u32 get_board_rev(void) +{ + int rev = 0; + + return (get_cpu_rev() & ~(0xF << 8)) | (rev & 0xF) << 8; +} diff --git a/board/CarMediaLab/flea3/lowlevel_init.S b/board/CarMediaLab/flea3/lowlevel_init.S new file mode 100644 index 0000000..2f42fc9 --- /dev/null +++ b/board/CarMediaLab/flea3/lowlevel_init.S @@ -0,0 +1,79 @@ +/* + * Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de> + * + * (C) Copyright 2008-2010 Freescale Semiconductor, Inc. + * + * Copyright (C) 2011, Stefano Babic <sbabic@denx.de> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <asm-offsets.h> +#include <asm/arch/imx-regs.h> +#include <generated/asm-offsets.h> + +/* + * Configuration for the flea3 board. + * These defines are used by the included macros and must + * be defined first + */ +#define AIPS_MPR_CONFIG 0x77777777 +#define AIPS_OPACR_CONFIG 0x00000000 + +/* MPR - priority is M4 > M2 > M3 > M5 > M0 > M1 */ +#define MAX_MPR_CONFIG 0x00302154 + +/* SGPCR - always park on last master */ +#define MAX_SGPCR_CONFIG 0x00000010 + +/* MGPCR - restore default values */ +#define MAX_MGPCR_CONFIG 0x00000000 + +/* + * M3IF Control Register (M3IFCTL) + * MRRP[0] = L2CC0 not on priority list (0 << 0) = 0x00000000 + * MRRP[1] = L2CC1 not on priority list (0 << 0) = 0x00000000 + * MRRP[2] = MBX not on priority list (0 << 0) = 0x00000000 + * MRRP[3] = MAX1 not on priority list (0 << 0) = 0x00000000 + * MRRP[4] = SDMA not on priority list (0 << 0) = 0x00000000 + * MRRP[5] = MPEG4 not on priority list (0 << 0) = 0x00000000 + * MRRP[6] = IPU1 on priority list (1 << 6) = 0x00000040 + * MRRP[7] = IPU2 not on priority list (0 << 0) = 0x00000000 + * ------------ + * 0x00000040 + */ +#define M3IF_CONFIG 0x00000040 + +#define CCM_PDR0_CONFIG 0x00801000 + +/* + * includes MX35 utility macros + */ +#include <asm/arch/lowlevel_macro.S> + +.globl lowlevel_init +lowlevel_init: + + core_init + + init_aips + + init_max + + init_m3if + + mov pc, lr diff --git a/board/LaCie/netspace_v2/kwbimage-is2.cfg b/board/LaCie/netspace_v2/kwbimage-is2.cfg new file mode 100644 index 0000000..590720a --- /dev/null +++ b/board/LaCie/netspace_v2/kwbimage-is2.cfg @@ -0,0 +1,162 @@ +# +# Copyright (C) 2011 Simon Guinot <sguinot@lacie.com> +# +# Based on Kirkwood support: +# (C) Copyright 2009 +# Marvell Semiconductor <www.marvell.com> +# Written-by: Prafulla Wadaskar <prafulla@marvell.com> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# Refer docs/README.kwimage for more details about how-to configure +# and create kirkwood boot image +# + +# Boot Media configurations +BOOT_FROM spi # Boot from SPI flash + +# SOC registers configuration using bootrom header extension +# Maximum KWBIMAGE_MAX_CONFIG configurations allowed + +# Configure RGMII-0 interface pad voltage to 1.8V +DATA 0xFFD100e0 0x1B1B1B9B + +#Dram initalization for SINGLE x16 CL=5 @ 400MHz +DATA 0xFFD01400 0x43000618 # DDR Configuration register +# bit13-0: 0xa00 (2560 DDR2 clks refresh rate) +# bit23-14: zero +# bit24: 1= enable exit self refresh mode on DDR access +# bit25: 1 required +# bit29-26: zero +# bit31-30: 01 + +DATA 0xFFD01404 0x35143000 # DDR Controller Control Low +# bit 4: 0=addr/cmd in smame cycle +# bit 5: 0=clk is driven during self refresh, we don't care for APX +# bit 6: 0=use recommended falling edge of clk for addr/cmd +# bit14: 0=input buffer always powered up +# bit18: 1=cpu lock transaction enabled +# bit23-20: 5=recommended value for CL=5 and STARTBURST_DEL disabled bit31=0 +# bit27-24: 8= CL+3, STARTBURST sample stages, for freqs 400MHz, unbuffered DIMM +# bit30-28: 3 required +# bit31: 0=no additional STARTBURST delay + +DATA 0xFFD01408 0x11012228 # DDR Timing (Low) (active cycles value +1) +# bit7-4: TRCD +# bit11- 8: TRP +# bit15-12: TWR +# bit19-16: TWTR +# bit20: TRAS msb +# bit23-21: 0x0 +# bit27-24: TRRD +# bit31-28: TRTP + +DATA 0xFFD0140C 0x00000A19 # DDR Timing (High) +# bit6-0: TRFC +# bit8-7: TR2R +# bit10-9: TR2W +# bit12-11: TW2W +# bit31-13: zero required + +DATA 0xFFD01410 0x00000008 # DDR Address Control +# bit1-0: 00, Cs0width=x8 +# bit3-2: 10, Cs0size=512Mb +# bit5-4: 00, Cs2width=nonexistent +# bit7-6: 00, Cs1size =nonexistent +# bit9-8: 00, Cs2width=nonexistent +# bit11-10: 00, Cs2size =nonexistent +# bit13-12: 00, Cs3width=nonexistent +# bit15-14: 00, Cs3size =nonexistent +# bit16: 0, Cs0AddrSel +# bit17: 0, Cs1AddrSel +# bit18: 0, Cs2AddrSel +# bit19: 0, Cs3AddrSel +# bit31-20: 0 required + +DATA 0xFFD01414 0x00000000 # DDR Open Pages Control +# bit0: 0, OpenPage enabled +# bit31-1: 0 required + +DATA 0xFFD01418 0x00000000 # DDR Operation +# bit3-0: 0x0, DDR cmd +# bit31-4: 0 required + +DATA 0xFFD0141C 0x00000632 # DDR Mode +# bit2-0: 2, BurstLen=2 required +# bit3: 0, BurstType=0 required +# bit6-4: 4, CL=5 +# bit7: 0, TestMode=0 normal +# bit8: 0, DLL reset=0 normal +# bit11-9: 6, auto-precharge write recovery ???????????? +# bit12: 0, PD must be zero +# bit31-13: 0 required + +DATA 0xFFD01420 0x00000004 # DDR Extended Mode +# bit0: 0, DDR DLL enabled +# bit1: 1, DDR drive strenght reduced +# bit2: 1, DDR ODT control lsd enabled +# bit5-3: 000, required +# bit6: 1, DDR ODT control msb, enabled +# bit9-7: 000, required +# bit10: 0, differential DQS enabled +# bit11: 0, required +# bit12: 0, DDR output buffer enabled +# bit31-13: 0 required + +DATA 0xFFD01424 0x0000F07F # DDR Controller Control High +# bit2-0: 111, required +# bit3 : 1 , MBUS Burst Chop disabled +# bit6-4: 111, required +# bit7 : 1 , D2P Latency enabled +# bit8 : 1 , add writepath sample stage, must be 1 for DDR freq >= 300MHz +# bit9 : 0 , no half clock cycle addition to dataout +# bit10 : 0 , 1/4 clock cycle skew enabled for addr/ctl signals +# bit11 : 0 , 1/4 clock cycle skew disabled for write mesh +# bit15-12: 1111 required +# bit31-16: 0 required + +DATA 0xFFD01428 0x00085520 # DDR2 ODT Read Timing (default values) +DATA 0xFFD0147C 0x00008552 # DDR2 ODT Write Timing (default values) + +DATA 0xFFD01500 0x00000000 # CS[0]n Base address to 0x0 +DATA 0xFFD01504 0x07FFFFF1 # CS[0]n Size +# bit0: 1, Window enabled +# bit1: 0, Write Protect disabled +# bit3-2: 00, CS0 hit selected +# bit23-4: ones, required +# bit31-24: 0x07, Size (i.e. 128MB) + +DATA 0xFFD0150C 0x00000000 # CS[1]n Size, window disabled +DATA 0xFFD01514 0x00000000 # CS[2]n Size, window disabled +DATA 0xFFD0151C 0x00000000 # CS[3]n Size, window disabled + +DATA 0xFFD01494 0x00010000 # DDR ODT Control (Low) +# bit3-0: 1, ODT0Rd, MODT[0] asserted during read from DRAM CS0 +# bit19-16:1, ODT0Wr, MODT[0] asserted during write to DRAM CS0 + +DATA 0xFFD01498 0x00000000 # DDR ODT Control (High) +# bit1-0: 00, ODT0 controlled by ODT Control (low) register above +# bit3-2: 01, ODT1 active NEVER! +# bit31-4: zero, required + +DATA 0xFFD0149C 0x0000E40F # CPU ODT Control +# bit3-0: 1, ODT0Rd, Internal ODT asserted during read from DRAM bank0 +# bit7-4: 1, ODT0Wr, Internal ODT asserted during write to DRAM bank0 +# bit11-10:1, DQ_ODTSel. ODT select turned on + +DATA 0xFFD01480 0x00000001 # DDR Initialization Control +#bit0=1, enable DDR init upon this register write + +# End of Header extension +DATA 0x0 0x0 diff --git a/board/LaCie/netspace_v2/kwbimage.cfg b/board/LaCie/netspace_v2/kwbimage.cfg index 361feeb..7e53649 100644 --- a/board/LaCie/netspace_v2/kwbimage.cfg +++ b/board/LaCie/netspace_v2/kwbimage.cfg @@ -69,8 +69,8 @@ DATA 0xFFD0140C 0x00000A19 # DDR Timing (High) # bit12-11: TW2W # bit31-13: zero required -DATA 0xFFD01410 0x0000CCCC # DDR Address Control -# bit1-0: 01, Cs0width=x16 +DATA 0xFFD01410 0x0000000C # DDR Address Control +# bit1-0: 00, Cs0width=x8 # bit3-2: 11, Cs0size=1Gb # bit5-4: 00, Cs2width=nonexistent # bit7-6: 00, Cs1size =nonexistent diff --git a/board/LaCie/netspace_v2/netspace_v2.c b/board/LaCie/netspace_v2/netspace_v2.c index 3bb83f3..7c4b15e 100644 --- a/board/LaCie/netspace_v2/netspace_v2.c +++ b/board/LaCie/netspace_v2/netspace_v2.c @@ -24,6 +24,7 @@ #include <miiphy.h> #include <netdev.h> #include <command.h> +#include <asm/arch/cpu.h> #include <asm/arch/kirkwood.h> #include <asm/arch/mpp.h> #include <asm/arch/gpio.h> diff --git a/board/Marvell/dreamplug/dreamplug.c b/board/Marvell/dreamplug/dreamplug.c index 13b4013..31b73c9 100644 --- a/board/Marvell/dreamplug/dreamplug.c +++ b/board/Marvell/dreamplug/dreamplug.c @@ -27,6 +27,7 @@ #include <common.h> #include <miiphy.h> +#include <asm/arch/cpu.h> #include <asm/arch/kirkwood.h> #include <asm/arch/mpp.h> #include "dreamplug.h" diff --git a/board/Seagate/dockstar/dockstar.c b/board/Seagate/dockstar/dockstar.c index cab3a83..a1de0dc 100644 --- a/board/Seagate/dockstar/dockstar.c +++ b/board/Seagate/dockstar/dockstar.c @@ -29,6 +29,8 @@ #include <miiphy.h> #include <asm/arch/kirkwood.h> #include <asm/arch/mpp.h> +#include <asm/arch/cpu.h> +#include <asm/io.h> #include "dockstar.h" DECLARE_GLOBAL_DATA_PTR; diff --git a/board/ait/cam_enc_4xx/Makefile b/board/ait/cam_enc_4xx/Makefile new file mode 100644 index 0000000..2b22124 --- /dev/null +++ b/board/ait/cam_enc_4xx/Makefile @@ -0,0 +1,46 @@ +# +# (C) Copyright 2000, 2001, 2002 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).o + +COBJS := $(BOARD).o +SOBJS := + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(call cmd_link_o_target, $(OBJS) $(SOBJS)) + +######################################################################### +# This is for $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/ait/cam_enc_4xx/cam_enc_4xx.c b/board/ait/cam_enc_4xx/cam_enc_4xx.c new file mode 100644 index 0000000..1351358 --- /dev/null +++ b/board/ait/cam_enc_4xx/cam_enc_4xx.c @@ -0,0 +1,446 @@ +/* + * Copyright (C) 2009 Texas Instruments Incorporated + * + * Copyright (C) 2011 + * Heiko Schocher, DENX Software Engineering, hs@denx.de. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <common.h> +#include <linux/mtd/nand.h> +#include <nand.h> +#include <miiphy.h> +#include <netdev.h> +#include <asm/io.h> +#include <asm/arch/hardware.h> +#include <asm/arch/nand_defs.h> +#include <asm/arch/davinci_misc.h> +#ifdef CONFIG_DAVINCI_MMC +#include <mmc.h> +#include <asm/arch/sdmmc_defs.h> +#endif + +DECLARE_GLOBAL_DATA_PTR; + +#ifndef CONFIG_SPL_BUILD +int dram_init(void) +{ + /* dram_init must store complete ramsize in gd->ram_size */ + gd->ram_size = get_ram_size( + (void *)CONFIG_SYS_SDRAM_BASE, + CONFIG_MAX_RAM_BANK_SIZE); + return 0; +} + +void dram_init_banksize(void) +{ + gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE; + gd->bd->bi_dram[0].size = gd->ram_size; +} + +static struct davinci_timer *timer = + (struct davinci_timer *)DAVINCI_TIMER3_BASE; + +static unsigned long get_timer_val(void) +{ + unsigned long now = readl(&timer->tim34); + + return now; +} + +static void stop_timer(void) +{ + writel(0x0, &timer->tcr); + return; +} + +int checkboard(void) +{ + printf("Board: AIT CAM ENC 4XX\n"); + return 0; +} + +int board_init(void) +{ + gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; + + return 0; +} + +#ifdef CONFIG_DRIVER_TI_EMAC +int board_eth_init(bd_t *bis) +{ + davinci_emac_initialize(); + + return 0; +} +#endif + +#ifdef CONFIG_NAND_DAVINCI +static int +davinci_std_read_page_syndrome(struct mtd_info *mtd, struct nand_chip *chip, + uint8_t *buf, int page) +{ + struct nand_chip *this = mtd->priv; + int i, eccsize = chip->ecc.size; + int eccbytes = chip->ecc.bytes; + int eccsteps = chip->ecc.steps; + uint8_t *p = buf; + uint8_t *oob = chip->oob_poi; + + chip->cmdfunc(mtd, NAND_CMD_READOOB, 0x0, page & this->pagemask); + + chip->read_buf(mtd, oob, mtd->oobsize); + + chip->cmdfunc(mtd, NAND_CMD_READ0, 0x0, page & this->pagemask); + + + for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) { + int stat; + + chip->ecc.hwctl(mtd, NAND_ECC_READ); + chip->read_buf(mtd, p, eccsize); + chip->ecc.hwctl(mtd, NAND_ECC_READSYN); + + if (chip->ecc.prepad) + oob += chip->ecc.prepad; + + stat = chip->ecc.correct(mtd, p, oob, NULL); + + if (stat == -1) + mtd->ecc_stats.failed++; + else + mtd->ecc_stats.corrected += stat; + + oob += eccbytes; + + if (chip->ecc.postpad) + oob += chip->ecc.postpad; + } + + /* Calculate remaining oob bytes */ + i = mtd->oobsize - (oob - chip->oob_poi); + if (i) + chip->read_buf(mtd, oob, i); + + return 0; +} + +static void davinci_std_write_page_syndrome(struct mtd_info *mtd, + struct nand_chip *chip, const uint8_t *buf) +{ + unsigned char davinci_ecc_buf[NAND_MAX_OOBSIZE]; + struct nand_chip *this = mtd->priv; + int i, eccsize = chip->ecc.size; + int eccbytes = chip->ecc.bytes; + int eccsteps = chip->ecc.steps; + int chunk = chip->ecc.bytes + chip->ecc.prepad + chip->ecc.postpad; + int offset = 0; + const uint8_t *p = buf; + uint8_t *oob = chip->oob_poi; + + for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) { + chip->ecc.hwctl(mtd, NAND_ECC_WRITE); + chip->write_buf(mtd, p, eccsize); + + /* Calculate ECC without prepad */ + chip->ecc.calculate(mtd, p, oob + chip->ecc.prepad); + + if (chip->ecc.prepad) { + offset = (chip->ecc.steps - eccsteps) * chunk; + memcpy(&davinci_ecc_buf[offset], oob, chip->ecc.prepad); + oob += chip->ecc.prepad; + } + + offset = ((chip->ecc.steps - eccsteps) * chunk) + + chip->ecc.prepad; + memcpy(&davinci_ecc_buf[offset], oob, eccbytes); + oob += eccbytes; + + if (chip->ecc.postpad) { + offset = ((chip->ecc.steps - eccsteps) * chunk) + + chip->ecc.prepad + eccbytes; + memcpy(&davinci_ecc_buf[offset], oob, + chip->ecc.postpad); + oob += chip->ecc.postpad; + } + } + + /* + * Write the sparebytes into the page once + * all eccsteps have been covered + */ + for (i = 0; i < mtd->oobsize; i++) + writeb(davinci_ecc_buf[i], this->IO_ADDR_W); + + /* Calculate remaining oob bytes */ + i = mtd->oobsize - (oob - chip->oob_poi); + if (i) + chip->write_buf(mtd, oob, i); +} + +static int davinci_std_write_oob_syndrome(struct mtd_info *mtd, + struct nand_chip *chip, int page) +{ + int pos, status = 0; + const uint8_t *bufpoi = chip->oob_poi; + + pos = mtd->writesize; + + chip->cmdfunc(mtd, NAND_CMD_SEQIN, pos, page); + + chip->write_buf(mtd, bufpoi, mtd->oobsize); + + chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1); + status = chip->waitfunc(mtd, chip); + + return status & NAND_STATUS_FAIL ? -1 : 0; +} + +static int davinci_std_read_oob_syndrome(struct mtd_info *mtd, + struct nand_chip *chip, int page, int sndcmd) +{ + struct nand_chip *this = mtd->priv; + uint8_t *buf = chip->oob_poi; + uint8_t *bufpoi = buf; + + chip->cmdfunc(mtd, NAND_CMD_READOOB, 0x0, page & this->pagemask); + + chip->read_buf(mtd, bufpoi, mtd->oobsize); + + return 1; +} + +static void nand_dm365evm_select_chip(struct mtd_info *mtd, int chip) +{ + struct nand_chip *this = mtd->priv; + unsigned long wbase = (unsigned long) this->IO_ADDR_W; + unsigned long rbase = (unsigned long) this->IO_ADDR_R; + + if (chip == 1) { + __set_bit(14, &wbase); + __set_bit(14, &rbase); + } else { + __clear_bit(14, &wbase); + __clear_bit(14, &rbase); + } + this->IO_ADDR_W = (void *)wbase; + this->IO_ADDR_R = (void *)rbase; +} + +int board_nand_init(struct nand_chip *nand) +{ + davinci_nand_init(nand); + nand->select_chip = nand_dm365evm_select_chip; + + return 0; +} + +struct nand_ecc_ctrl org_ecc; +static int notsaved = 1; + +static int nand_switch_hw_func(int mode) +{ + struct nand_chip *nand; + struct mtd_info *mtd; + + if (nand_curr_device < 0 || + nand_curr_device >= CONFIG_SYS_MAX_NAND_DEVICE || + !nand_info[nand_curr_device].name) { + printf("Error: Can't switch hw functions," \ + " no devices available\n"); + return -1; + } + + mtd = &nand_info[nand_curr_device]; + nand = mtd->priv; + + if (mode == 0) { + printf("switching to uboot hw functions.\n"); + memcpy(&nand->ecc, &org_ecc, sizeof(struct nand_ecc_ctrl)); + } else { + /* RBL */ + printf("switching to RBL hw functions.\n"); + if (notsaved == 1) { + memcpy(&org_ecc, &nand->ecc, + sizeof(struct nand_ecc_ctrl)); + notsaved = 0; + } + nand->ecc.mode = NAND_ECC_HW_SYNDROME; + nand->ecc.prepad = 6; + nand->ecc.read_page = davinci_std_read_page_syndrome; + nand->ecc.write_page = davinci_std_write_page_syndrome; + nand->ecc.read_oob = davinci_std_read_oob_syndrome; + nand->ecc.write_oob = davinci_std_write_oob_syndrome; + } + return mode; +} + +static int hwmode; + +static int do_switch_ecc(cmd_tbl_t *cmdtp, int flag, int argc, + char *const argv[]) +{ + if (argc != 2) + goto usage; + if (strncmp(argv[1], "rbl", 2) == 0) + hwmode = nand_switch_hw_func(1); + else if (strncmp(argv[1], "uboot", 2) == 0) + hwmode = nand_switch_hw_func(0); + else + goto usage; + + return 0; + +usage: + printf("Usage: nandrbl %s\n", cmdtp->usage); + return 1; +} + +U_BOOT_CMD( + nandrbl, 2, 1, do_switch_ecc, + "switch between rbl/uboot NAND ECC calculation algorithm", + "[rbl/uboot] - Switch between rbl/uboot NAND ECC algorithm" +); + + +#endif /* #ifdef CONFIG_NAND_DAVINCI */ + +#ifdef CONFIG_DAVINCI_MMC +static struct davinci_mmc mmc_sd0 = { + .reg_base = (struct davinci_mmc_regs *)DAVINCI_MMC_SD0_BASE, + .input_clk = 121500000, + .host_caps = MMC_MODE_4BIT, + .voltages = MMC_VDD_32_33 | MMC_VDD_33_34, + .version = MMC_CTLR_VERSION_2, +}; + +int board_mmc_init(bd_t *bis) +{ + int err; + + /* Add slot-0 to mmc subsystem */ + err = davinci_mmc_init(bis, &mmc_sd0); + + return err; +} +#endif + +int board_late_init(void) +{ + struct davinci_gpio *gpio = davinci_gpio_bank45; + + /* 24MHz InputClock / 15 prediv -> 1.6 MHz timer running */ + while (get_timer_val() < 0x186a00) + ; + + /* 1 sec reached -> stop timer, clear all LED */ + stop_timer(); + clrbits_le32(&gpio->out_data, CONFIG_CAM_ENC_LED_MASK); + return 0; +} + +void reset_phy(void) +{ + char *name = "GENERIC @ 0x00"; + + /* reset the phy */ + miiphy_reset(name, 0x0); +} + +#else /* #ifndef CONFIG_SPL_BUILD */ +static void cam_enc_4xx_set_all_led(void) +{ + struct davinci_gpio *gpio = davinci_gpio_bank45; + + setbits_le32(&gpio->out_data, CONFIG_CAM_ENC_LED_MASK); +} + +/* + * TIMER 0 is used for tick + */ +static struct davinci_timer *timer = + (struct davinci_timer *)DAVINCI_TIMER3_BASE; + +#define TIMER_LOAD_VAL 0xffffffff +#define TIM_CLK_DIV 16 + +static int cam_enc_4xx_timer_init(void) +{ + /* We are using timer34 in unchained 32-bit mode, full speed */ + writel(0x0, &timer->tcr); + writel(0x0, &timer->tgcr); + writel(0x06 | ((TIM_CLK_DIV - 1) << 8), &timer->tgcr); + writel(0x0, &timer->tim34); + writel(TIMER_LOAD_VAL, &timer->prd34); + writel(2 << 22, &timer->tcr); + return 0; +} + +void board_gpio_init(void) +{ + struct davinci_gpio *gpio; + + cam_enc_4xx_set_all_led(); + cam_enc_4xx_timer_init(); + gpio = davinci_gpio_bank01; + clrbits_le32(&gpio->dir, ~0xfdfffffe); + /* clear LED D14 = GPIO25 */ + clrbits_le32(&gpio->out_data, 0x02000000); + gpio = davinci_gpio_bank23; + clrbits_le32(&gpio->dir, ~0x5ff0afef); + /* set GPIO61 to 1 -> intern UART0 as Console */ + setbits_le32(&gpio->out_data, 0x20000000); + /* + * PHY out of reset GIO 50 = 1 + * NAND WP off GIO 51 = 1 + */ + setbits_le32(&gpio->out_data, 0x000c0004); + gpio = davinci_gpio_bank45; + clrbits_le32(&gpio->dir, ~(0xdb2fffff) | CONFIG_CAM_ENC_LED_MASK); + /* + * clear LED: + * D17 = GPIO86 + * D11 = GPIO87 + * GPIO88 + * GPIO89 + * D13 = GPIO90 + * GPIO91 + */ + clrbits_le32(&gpio->out_data, CONFIG_CAM_ENC_LED_MASK); + gpio = davinci_gpio_bank67; + clrbits_le32(&gpio->dir, ~0x000007ff); +} + +/* + * functions for the post memory test. + */ +int arch_memory_test_prepare(u32 *vstart, u32 *size, phys_addr_t *phys_offset) +{ + *vstart = CONFIG_SYS_SDRAM_BASE; + *size = PHYS_SDRAM_1_SIZE; + *phys_offset = 0; + return 0; +} + +void arch_memory_failure_handle(void) +{ + cam_enc_4xx_set_all_led(); + puts("mem failure\n"); + while (1) + ; +} +#endif diff --git a/board/ait/cam_enc_4xx/config.mk b/board/ait/cam_enc_4xx/config.mk new file mode 100644 index 0000000..b1f9b6c --- /dev/null +++ b/board/ait/cam_enc_4xx/config.mk @@ -0,0 +1,15 @@ +# +# AIT cam_enc_4xx board +# cam_enc_4xx board has 1 bank of 256 MB DDR RAM +# Physical Address: 8000'0000 to 9000'0000 +# +# Linux Kernel is expected to be at 8000'8000, entry 8000'8000 +# (mem base + reserved) +# + +#Provide at least 16MB spacing between us and the Linux Kernel image +PAD_TO := 12320 +UBL_CONFIG = $(SRCTREE)/board/$(BOARDDIR)/ublimage.cfg +ifndef CONFIG_SPL_BUILD +ALL-y += $(obj)u-boot.ubl +endif diff --git a/mmc_spl/board/samsung/smdkv310/u-boot.lds b/board/ait/cam_enc_4xx/u-boot-spl.lds index 4a231d9..6f6e065 100644 --- a/mmc_spl/board/samsung/smdkv310/u-boot.lds +++ b/board/ait/cam_enc_4xx/u-boot-spl.lds @@ -1,13 +1,10 @@ /* - * (C) Copyright 2011 - * Chander Kashyap, Samsung Electronics, <k.chander@samsung.com> - * - * January 2004 - Changed to support H4 device - * Copyright (c) 2004-2008 Texas Instruments - * * (C) Copyright 2002 * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de> * + * (C) Copyright 2008 + * Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de> + * * See file CREDITS for list of people who contributed to this * project. * @@ -18,7 +15,7 @@ * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License @@ -27,6 +24,9 @@ * MA 02111-1307 USA */ +MEMORY { .sram : ORIGIN = CONFIG_SPL_TEXT_BASE,\ + LENGTH = CONFIG_SPL_MAX_SIZE } + OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") OUTPUT_ARCH(arm) ENTRY(_start) @@ -35,54 +35,39 @@ SECTIONS . = 0x00000000; . = ALIGN(4); - .text : + .text : { - start.o (.text) - *(.text) - } + __start = .; + arch/arm/cpu/arm926ejs/start.o (.text) + *(.text*) + } >.sram . = ALIGN(4); - .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) } + .rodata : { *(SORT_BY_ALIGNMENT(.rodata*)) } >.sram . = ALIGN(4); - .data : { - *(.data) - } - - . = ALIGN(4); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - + .data : { *(SORT_BY_ALIGNMENT(.data*)) } >.sram . = ALIGN(4); - - __image_copy_end = .; - .rel.dyn : { __rel_dyn_start = .; *(.rel*) __rel_dyn_end = .; - } + } >.sram .dynsym : { __dynsym_start = .; *(.dynsym) - } - - _end = .; + } >.sram - .bss __rel_dyn_start (OVERLAY) : { + .bss : + { + . = ALIGN(4); __bss_start = .; - *(.bss) - . = ALIGN(4); + *(.bss*) + . = ALIGN(4); __bss_end__ = .; - } + } >.sram - /DISCARD/ : { *(.dynstr*) } - /DISCARD/ : { *(.dynamic*) } - /DISCARD/ : { *(.plt*) } - /DISCARD/ : { *(.interp*) } - /DISCARD/ : { *(.gnu*) } + __image_copy_end = .; + _end = .; } diff --git a/board/ait/cam_enc_4xx/ublimage.cfg b/board/ait/cam_enc_4xx/ublimage.cfg new file mode 100644 index 0000000..95182ca --- /dev/null +++ b/board/ait/cam_enc_4xx/ublimage.cfg @@ -0,0 +1,48 @@ +# +# (C Copyright 2011 +# Heiko Schocher DENX Software Engineering hs@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not write to the Free Software +# Foundation Inc. 51 Franklin Street Fifth Floor Boston, +# MA 02110-1301 USA +# +# Refer doc/README.ublimage for more details about how-to configure +# and create ublimage boot image +# +# The syntax is taken as close as possible with the kwbimage + +# UBL special mode : one of +# safe (the board has no nand neither onenand) +MODE safe + +# Entry point address for the user bootloader (absolute address) +# nand spl TEXT_BASE = 0x20 !! +ENTRY 0x00000020 + +# Number of pages (size of user bootloader in number of pages) +# @ nand spl 6 pages +PAGES 6 + +# Block number where user bootloader is present +# RBL starts always with block 1 +START_BLOCK 5 + +# Page number where user bootloader is present +# Page 0 is always UBL header +START_PAGE 0 + +LD_ADDR 0x20 diff --git a/board/comelit/dig297/dig297.c b/board/comelit/dig297/dig297.c index c81ce58..6548281 100644 --- a/board/comelit/dig297/dig297.c +++ b/board/comelit/dig297/dig297.c @@ -91,8 +91,6 @@ static const u32 gpmc_lan_config[] = { int board_init(void) { gpmc_init(); /* in SRAM or SDRAM, finish GPMC */ - /* board id for Linux */ - gd->bd->bi_arch_number = MACH_TYPE_OMAP3_CPS; /* boot param addr */ gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100); diff --git a/board/davedenx/qong/qong.c b/board/davedenx/qong/qong.c index 5b2830c..665aedf 100644 --- a/board/davedenx/qong/qong.c +++ b/board/davedenx/qong/qong.c @@ -120,12 +120,6 @@ int board_early_init_f(void) mx31_gpio_mux(IOMUX_MODE(MUX_CTL_USBH2_STP, MUX_CTL_FUNC)); mx31_gpio_mux(IOMUX_MODE(MUX_CTL_USBH2_DATA0, MUX_CTL_FUNC)); mx31_gpio_mux(IOMUX_MODE(MUX_CTL_USBH2_DATA1, MUX_CTL_FUNC)); - mx31_gpio_mux(IOMUX_MODE(MUX_CTL_STXD3, MUX_CTL_FUNC)); - mx31_gpio_mux(IOMUX_MODE(MUX_CTL_SRXD3, MUX_CTL_FUNC)); - mx31_gpio_mux(IOMUX_MODE(MUX_CTL_SCK3, MUX_CTL_FUNC)); - mx31_gpio_mux(IOMUX_MODE(MUX_CTL_SFS3, MUX_CTL_FUNC)); - mx31_gpio_mux(IOMUX_MODE(MUX_CTL_STXD6, MUX_CTL_FUNC)); - mx31_gpio_mux(IOMUX_MODE(MUX_CTL_SRXD6, MUX_CTL_FUNC)); #define H2_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \ PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU) @@ -143,7 +137,7 @@ int board_early_init_f(void) mx31_set_pad(MX31_PIN_SRXD3, H2_PAD_CFG); /* USBH2_DATA6 */ mx31_set_pad(MX31_PIN_STXD3, H2_PAD_CFG); /* USBH2_DATA7 */ - writel(readl((IOMUXC_BASE + 0x8)) | (1 << 11), IOMUXC_BASE + 0x8); + mx31_set_gpr(MUX_PGP_UH2, 1); return 0; diff --git a/board/davinci/common/misc.c b/board/davinci/common/misc.c index 89ae111..5aa7605 100644 --- a/board/davinci/common/misc.c +++ b/board/davinci/common/misc.c @@ -33,7 +33,7 @@ DECLARE_GLOBAL_DATA_PTR; -#ifndef CONFIG_PRELOADER +#ifndef CONFIG_SPL_BUILD int dram_init(void) { /* dram_init must store complete ramsize in gd->ram_size */ diff --git a/board/davinci/ea20/ea20.c b/board/davinci/ea20/ea20.c index 9d0f71b..720a360 100644 --- a/board/davinci/ea20/ea20.c +++ b/board/davinci/ea20/ea20.c @@ -35,11 +35,28 @@ #include <asm/arch/emac_defs.h> #include <asm/io.h> #include <asm/arch/davinci_misc.h> +#include <asm/arch/gpio.h> +#include <asm/arch/da8xx-fb.h> DECLARE_GLOBAL_DATA_PTR; #define pinmux(x) (&davinci_syscfg_regs->pinmux[x]) +static const struct da8xx_panel lcd_panel = { + /* Casio COM57H531x */ + .name = "Casio_COM57H531x", + .width = 640, + .height = 480, + .hfp = 12, + .hbp = 144, + .hsw = 30, + .vfp = 10, + .vbp = 35, + .vsw = 3, + .pxl_clk = 25000000, + .invert_pxl_clk = 0, +}; + /* SPI0 pin muxer settings */ static const struct pinmux_config spi1_pins[] = { { pinmux(5), 1, 1 }, @@ -48,12 +65,18 @@ static const struct pinmux_config spi1_pins[] = { { pinmux(5), 1, 5 } }; -/* UART pin muxer settings */ +/* I2C pin muxer settings */ +static const struct pinmux_config i2c_pins[] = { + { pinmux(4), 2, 2 }, + { pinmux(4), 2, 3 } +}; + +/* UART0 pin muxer settings */ static const struct pinmux_config uart_pins[] = { - { pinmux(0), 4, 6 }, - { pinmux(0), 4, 7 }, - { pinmux(4), 2, 4 }, - { pinmux(4), 2, 5 } + { pinmux(3), 2, 7 }, + { pinmux(3), 2, 6 }, + { pinmux(3), 2, 4 }, + { pinmux(3), 2, 5 } }; #ifdef CONFIG_DRIVER_TI_EMAC @@ -73,70 +96,136 @@ static const struct pinmux_config emac_pins[] = { #ifdef CONFIG_NAND_DAVINCI const struct pinmux_config nand_pins[] = { - { pinmux(7), 1, 1 }, - { pinmux(7), 1, 2 }, - { pinmux(7), 1, 4 }, - { pinmux(7), 1, 5 }, - { pinmux(9), 1, 0 }, - { pinmux(9), 1, 1 }, - { pinmux(9), 1, 2 }, - { pinmux(9), 1, 3 }, - { pinmux(9), 1, 4 }, - { pinmux(9), 1, 5 }, - { pinmux(9), 1, 6 }, - { pinmux(9), 1, 7 }, - { pinmux(12), 1, 5 }, - { pinmux(12), 1, 6 } + { pinmux(7), 1, 0}, /* CS2 */ + { pinmux(7), 0, 1}, /* CS3 in three state*/ + { pinmux(7), 1, 4 }, /* EMA_WE */ + { pinmux(7), 1, 5 }, /* EMA_OE */ + { pinmux(9), 1, 0 }, /* EMA_D[7] */ + { pinmux(9), 1, 1 }, /* EMA_D[6] */ + { pinmux(9), 1, 2 }, /* EMA_D[5] */ + { pinmux(9), 1, 3 }, /* EMA_D[4] */ + { pinmux(9), 1, 4 }, /* EMA_D[3] */ + { pinmux(9), 1, 5 }, /* EMA_D[2] */ + { pinmux(9), 1, 6 }, /* EMA_D[1] */ + { pinmux(9), 1, 7 }, /* EMA_D[0] */ + { pinmux(12), 1, 5 }, /* EMA_A[2] */ + { pinmux(12), 1, 6 }, /* EMA_A[1] */ + { pinmux(6), 1, 0 } /* EMA_CLK */ }; #endif +const struct pinmux_config gpio_pins[] = { + { pinmux(13), 8, 0 }, /* GPIO6[15] RESETOUTn on SOM*/ + { pinmux(13), 8, 5 }, /* GPIO6[10] U0_SW0 on EA20-00101_2*/ + { pinmux(13), 8, 3 }, /* GPIO6[12] U0_SW1 on EA20-00101_2*/ + { pinmux(19), 8, 5 }, /* GPIO6[1] DISP_ON */ + { pinmux(14), 8, 1 } /* GPIO6[6] LCD_B_PWR*/ +}; + +const struct pinmux_config lcd_pins[] = { + { pinmux(17), 2, 1 }, /* LCD_D_0 */ + { pinmux(17), 2, 0 }, /* LCD_D_1 */ + { pinmux(16), 2, 7 }, /* LCD_D_2 */ + { pinmux(16), 2, 6 }, /* LCD_D_3 */ + { pinmux(16), 2, 5 }, /* LCD_D_4 */ + { pinmux(16), 2, 4 }, /* LCD_D_5 */ + { pinmux(16), 2, 3 }, /* LCD_D_6 */ + { pinmux(16), 2, 2 }, /* LCD_D_7 */ + { pinmux(18), 2, 1 }, /* LCD_D_8 */ + { pinmux(18), 2, 0 }, /* LCD_D_9 */ + { pinmux(17), 2, 7 }, /* LCD_D_10 */ + { pinmux(17), 2, 6 }, /* LCD_D_11 */ + { pinmux(17), 2, 5 }, /* LCD_D_12 */ + { pinmux(17), 2, 4 }, /* LCD_D_13 */ + { pinmux(17), 2, 3 }, /* LCD_D_14 */ + { pinmux(17), 2, 2 }, /* LCD_D_15 */ + { pinmux(18), 2, 6 }, /* LCD_PCLK */ + { pinmux(19), 2, 0 }, /* LCD_HSYNC */ + { pinmux(19), 2, 1 }, /* LCD_VSYNC */ + { pinmux(19), 2, 6 }, /* DA850_NLCD_AC_ENB_CS */ +}; + +const struct pinmux_config halten_pin[] = { + { pinmux(3), 4, 2 } /* GPIO8[6] HALTEN */ +}; + static const struct pinmux_resource pinmuxes[] = { #ifdef CONFIG_SPI_FLASH PINMUX_ITEM(spi1_pins), #endif PINMUX_ITEM(uart_pins), + PINMUX_ITEM(i2c_pins), #ifdef CONFIG_NAND_DAVINCI PINMUX_ITEM(nand_pins), #endif +#ifdef CONFIG_VIDEO + PINMUX_ITEM(lcd_pins), +#endif }; static const struct lpsc_resource lpsc[] = { { DAVINCI_LPSC_AEMIF }, /* NAND, NOR */ { DAVINCI_LPSC_SPI1 }, /* Serial Flash */ { DAVINCI_LPSC_EMAC }, /* image download */ - { DAVINCI_LPSC_UART2 }, /* console */ + { DAVINCI_LPSC_UART0 }, /* console */ { DAVINCI_LPSC_GPIO }, + { DAVINCI_LPSC_LCDC }, /* LCD */ }; -int board_init(void) +int board_early_init_f(void) { + struct davinci_gpio *gpio6_base = + (struct davinci_gpio *)DAVINCI_GPIO_BANK67; + + /* PinMux for GPIO */ + if (davinci_configure_pin_mux(gpio_pins, ARRAY_SIZE(gpio_pins)) != 0) + return 1; + + /* Set the RESETOUTn low */ + writel((readl(&gpio6_base->set_data) & ~(1 << 15)), + &gpio6_base->set_data); + writel((readl(&gpio6_base->dir) & ~(1 << 15)), &gpio6_base->dir); + + /* Set U0_SW0 low for UART0 as console*/ + writel((readl(&gpio6_base->set_data) & ~(1 << 10)), + &gpio6_base->set_data); + writel((readl(&gpio6_base->dir) & ~(1 << 10)), &gpio6_base->dir); + + /* Set U0_SW1 low for UART0 as console*/ + writel((readl(&gpio6_base->set_data) & ~(1 << 12)), + &gpio6_base->set_data); + writel((readl(&gpio6_base->dir) & ~(1 << 12)), &gpio6_base->dir); + + /* Set LCD_B_PWR low to power down LCD Backlight*/ + writel((readl(&gpio6_base->set_data) & ~(1 << 6)), + &gpio6_base->set_data); + writel((readl(&gpio6_base->dir) & ~(1 << 6)), &gpio6_base->dir); + + /* Set DISP_ON low to disable LCD output*/ + writel((readl(&gpio6_base->set_data) & ~(1 << 1)), + &gpio6_base->set_data); + writel((readl(&gpio6_base->dir) & ~(1 << 1)), &gpio6_base->dir); + #ifndef CONFIG_USE_IRQ irq_init(); #endif - -#ifdef CONFIG_NAND_DAVINCI /* * NAND CS setup - cycle counts based on da850evm NAND timings in the * Linux kernel @ 25MHz EMIFA */ +#ifdef CONFIG_NAND_DAVINCI writel((DAVINCI_ABCR_WSETUP(0) | - DAVINCI_ABCR_WSTROBE(0) | + DAVINCI_ABCR_WSTROBE(1) | DAVINCI_ABCR_WHOLD(0) | DAVINCI_ABCR_RSETUP(0) | DAVINCI_ABCR_RSTROBE(1) | DAVINCI_ABCR_RHOLD(0) | DAVINCI_ABCR_TA(0) | DAVINCI_ABCR_ASIZE_8BIT), - &davinci_emif_regs->ab2cr); /* CS3 */ + &davinci_emif_regs->ab1cr); /* CS2 */ #endif - /* arch number of the board */ - gd->bd->bi_arch_number = MACH_TYPE_EA20; - - /* address of boot parameters */ - gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR; - /* * Power on required peripherals * ARM does not have access by default to PSC0 and PSC1 @@ -150,7 +239,7 @@ int board_init(void) writel(readl(&davinci_syscfg_regs->suspsrc) & ~(DAVINCI_SYSCFG_SUSPSRC_EMAC | DAVINCI_SYSCFG_SUSPSRC_I2C | DAVINCI_SYSCFG_SUSPSRC_SPI1 | DAVINCI_SYSCFG_SUSPSRC_TIMER0 | - DAVINCI_SYSCFG_SUSPSRC_UART2), + DAVINCI_SYSCFG_SUSPSRC_UART0), &davinci_syscfg_regs->suspsrc); /* configure pinmux settings */ @@ -167,10 +256,60 @@ int board_init(void) /* enable the console UART */ writel((DAVINCI_UART_PWREMU_MGMT_FREE | DAVINCI_UART_PWREMU_MGMT_URRST | DAVINCI_UART_PWREMU_MGMT_UTRST), - &davinci_uart2_ctrl_regs->pwremu_mgmt); + &davinci_uart0_ctrl_regs->pwremu_mgmt); + + /* + * Reconfigure the LCDC priority to the highest to ensure that + * the throughput/latency requirements for the LCDC are met. + */ + writel(readl(&davinci_syscfg_regs->mstpri[2]) & 0x0fffffff, + &davinci_syscfg_regs->mstpri[2]); + + /* Set LCD_B_PWR low to power up LCD Backlight*/ + writel((readl(&gpio6_base->set_data) | (1 << 6)), + &gpio6_base->set_data); + + /* Set DISP_ON low to disable LCD output*/ + writel((readl(&gpio6_base->set_data) | (1 << 1)), + &gpio6_base->set_data); + + return 0; +} + +int board_init(void) +{ + /* arch number of the board */ + gd->bd->bi_arch_number = MACH_TYPE_EA20; + + /* address of boot parameters */ + gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR; + + da8xx_video_init(&lcd_panel, 16); + + return 0; +} + +#ifdef BOARD_LATE_INIT + +int board_late_init(void) +{ + struct davinci_gpio *gpio8_base = + (struct davinci_gpio *)DAVINCI_GPIO_BANK8; + + /* PinMux for HALTEN */ + if (davinci_configure_pin_mux(halten_pin, ARRAY_SIZE(halten_pin)) != 0) + return 1; + + /* Set HALTEN to high */ + writel((readl(&gpio8_base->set_data) | (1 << 6)), + &gpio8_base->set_data); + writel((readl(&gpio8_base->dir) & ~(1 << 6)), &gpio8_base->dir); + + setenv("stdout", "serial"); return 0; } +#endif /* BOARD_LATE_INIT */ #ifdef CONFIG_DRIVER_TI_EMAC diff --git a/board/freescale/mx31pdk/mx31pdk.c b/board/freescale/mx31pdk/mx31pdk.c index 0e7e0ce..1d7b4f6 100644 --- a/board/freescale/mx31pdk/mx31pdk.c +++ b/board/freescale/mx31pdk/mx31pdk.c @@ -30,6 +30,8 @@ #include <asm/arch/imx-regs.h> #include <asm/arch/sys_proto.h> #include <watchdog.h> +#include <pmic.h> +#include <fsl_pmic.h> DECLARE_GLOBAL_DATA_PTR; @@ -69,16 +71,34 @@ int board_early_init_f(void) return 0; } +void enable_caches(void) +{ + icache_enable(); + dcache_enable(); +} + int board_init(void) { /* adress of boot parameters */ gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; + enable_caches(); + return 0; } int board_late_init(void) { + u32 val; + struct pmic *p; + + pmic_init(); + p = get_pmic(); + + /* Enable RTC battery */ + pmic_reg_read(p, REG_POWER_CTL0, &val); + pmic_reg_write(p, REG_POWER_CTL0, val | COINCHEN); + pmic_reg_write(p, REG_INT_STATUS1, RTCRSTI); #ifdef CONFIG_HW_WATCHDOG mxc_hw_watchdog_enable(); #endif diff --git a/board/freescale/mx35pdk/mx35pdk.h b/board/freescale/mx35pdk/mx35pdk.h index 409aeb2..6aeb218 100644 --- a/board/freescale/mx35pdk/mx35pdk.h +++ b/board/freescale/mx35pdk/mx35pdk.h @@ -59,24 +59,6 @@ #define CCM_CCMR_CONFIG 0x003F4208 #define CCM_PDR0_CONFIG 0x00801000 -#define PLL_BRM_OFFSET 31 -#define PLL_PD_OFFSET 26 -#define PLL_MFD_OFFSET 16 -#define PLL_MFI_OFFSET 10 - -#define _PLL_BRM(x) ((x) << PLL_BRM_OFFSET) -#define _PLL_PD(x) (((x) - 1) << PLL_PD_OFFSET) -#define _PLL_MFD(x) (((x) - 1) << PLL_MFD_OFFSET) -#define _PLL_MFI(x) ((x) << PLL_MFI_OFFSET) -#define _PLL_MFN(x) (x) -#define _PLL_SETTING(brm, pd, mfd, mfi, mfn) \ - (_PLL_BRM(brm) | _PLL_PD(pd) | _PLL_MFD(mfd) | _PLL_MFI(mfi) |\ - _PLL_MFN(mfn)) - -#define CCM_MPLL_532_HZ _PLL_SETTING(1, 1, 12, 11, 1) -#define CCM_MPLL_399_HZ _PLL_SETTING(0, 1, 16, 8, 5) -#define CCM_PPLL_300_HZ _PLL_SETTING(0, 1, 4, 6, 1) - /* MEMORY SETTING */ #define ESDCTL_0x92220000 0x92220000 #define ESDCTL_0xA2220000 0xA2220000 diff --git a/board/freescale/mx51evk/mx51evk.c b/board/freescale/mx51evk/mx51evk.c index 2a0dad0..37e6e4d 100644 --- a/board/freescale/mx51evk/mx51evk.c +++ b/board/freescale/mx51evk/mx51evk.c @@ -38,8 +38,6 @@ DECLARE_GLOBAL_DATA_PTR; -static u32 system_rev; - #ifdef CONFIG_FSL_ESDHC struct fsl_esdhc_cfg esdhc_cfg[2] = { {MMC_SDHC1_BASE_ADDR, 1}, @@ -47,11 +45,6 @@ struct fsl_esdhc_cfg esdhc_cfg[2] = { }; #endif -u32 get_board_rev(void) -{ - return system_rev; -} - int dram_init(void) { /* dram_init must store complete ramsize in gd->ram_size */ @@ -254,16 +247,14 @@ static void power_init(void) pmic_reg_write(p, REG_MODE_1, val); udelay(200); - gpio_direction_output(46, 0); - - /* Reset the ethernet controller over GPIO */ - writel(0x1, IOMUXC_BASE_ADDR + 0x0AC); - /* Enable VGEN3, VCAM, VAUDIO, VVIDEO, VSD regulators */ val = VGEN3EN | VGEN3CONFIG | VCAMEN | VCAMCONFIG | VVIDEOEN | VAUDIOEN | VSDEN; pmic_reg_write(p, REG_MODE_1, val); + mxc_request_iomux(MX51_PIN_EIM_A20, IOMUX_CONFIG_ALT1); + gpio_direction_output(46, 0); + udelay(500); gpio_set_value(46, 1); @@ -406,8 +397,6 @@ int board_early_init_f(void) int board_init(void) { - system_rev = get_cpu_rev(); - /* address of boot parameters */ gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; diff --git a/board/freescale/mx53ard/mx53ard.c b/board/freescale/mx53ard/mx53ard.c index c89da13..be32aee 100644 --- a/board/freescale/mx53ard/mx53ard.c +++ b/board/freescale/mx53ard/mx53ard.c @@ -37,11 +37,6 @@ DECLARE_GLOBAL_DATA_PTR; -u32 get_board_rev(void) -{ - return get_cpu_rev(); -} - int dram_init(void) { u32 size1, size2; diff --git a/board/freescale/mx53evk/mx53evk.c b/board/freescale/mx53evk/mx53evk.c index eab9c5f..335661f 100644 --- a/board/freescale/mx53evk/mx53evk.c +++ b/board/freescale/mx53evk/mx53evk.c @@ -39,11 +39,6 @@ DECLARE_GLOBAL_DATA_PTR; -u32 get_board_rev(void) -{ - return get_cpu_rev(); -} - int dram_init(void) { /* dram_init must store complete ramsize in gd->ram_size */ diff --git a/board/freescale/mx53loco/mx53loco.c b/board/freescale/mx53loco/mx53loco.c index 156f8b5..b4c7f33 100644 --- a/board/freescale/mx53loco/mx53loco.c +++ b/board/freescale/mx53loco/mx53loco.c @@ -38,11 +38,6 @@ DECLARE_GLOBAL_DATA_PTR; -u32 get_board_rev(void) -{ - return get_cpu_rev(); -} - int dram_init(void) { u32 size1, size2; diff --git a/board/freescale/mx53smd/mx53smd.c b/board/freescale/mx53smd/mx53smd.c index 776784f..87fa7fa 100644 --- a/board/freescale/mx53smd/mx53smd.c +++ b/board/freescale/mx53smd/mx53smd.c @@ -35,11 +35,6 @@ DECLARE_GLOBAL_DATA_PTR; -u32 get_board_rev(void) -{ - return get_cpu_rev(); -} - int dram_init(void) { u32 size1, size2; diff --git a/board/hale/tt01/Makefile b/board/hale/tt01/Makefile new file mode 100644 index 0000000..f6b2854 --- /dev/null +++ b/board/hale/tt01/Makefile @@ -0,0 +1,51 @@ +# +# (C) Copyright 2009 HALE electronic <helmut.raiger@hale.at> +# (C) Copyright 2000-2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).o +COBJS := tt01.o +SOBJS := lowlevel_init.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(call cmd_link_o_target, $(OBJS) $(SOBJS)) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/hale/tt01/lowlevel_init.S b/board/hale/tt01/lowlevel_init.S new file mode 100644 index 0000000..6e9dc80 --- /dev/null +++ b/board/hale/tt01/lowlevel_init.S @@ -0,0 +1,32 @@ +/* + * (C) Copyright 2009 Magnus Lilja <lilja.magnus@gmail.com> + * (C) Copyright 2011 Helmut Raiger <helmut.raiger@hale.at> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <config.h> +#include <asm/arch/imx-regs.h> +#include <asm/macro.h> + +.globl lowlevel_init +lowlevel_init: + /* Also setup the Peripheral Port Remap register inside the core */ + ldr r0, =ARM_PPMRR /* start from AIPS 2GB region */ + mcr p15, 0, r0, c15, c2, 4 + mov pc, lr diff --git a/board/hale/tt01/tt01.c b/board/hale/tt01/tt01.c new file mode 100644 index 0000000..2995c8f --- /dev/null +++ b/board/hale/tt01/tt01.c @@ -0,0 +1,200 @@ +/* + * (C) Copyright 2011 HALE electronic <helmut.raiger@hale.at> + * (C) Copyright 2009 Magnus Lilja <lilja.magnus@gmail.com> + * (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <netdev.h> +#include <command.h> +#include <pmic.h> +#include <asm/arch/clock.h> +#include <asm/arch/sys_proto.h> +#include <asm/io.h> + +DECLARE_GLOBAL_DATA_PTR; + +#define BOARD_STRING "Board: HALE TT-01" + +/* Clock configuration */ +#define CCM_CCMR_SETUP 0x074B0BF5 + +static void board_setup_clocks(void) +{ + struct clock_control_regs *ccm = (struct clock_control_regs *) CCM_BASE; + volatile int wait = 0x10000; + + writel(CCM_CCMR_SETUP, &ccm->ccmr); + while (wait--) + ; + + writel(CCM_CCMR_SETUP | CCMR_MPE, &ccm->ccmr); + writel((CCM_CCMR_SETUP | CCMR_MPE) & ~CCMR_MDS, &ccm->ccmr); + + /* Set up clock to 532MHz */ + writel(PDR0_CSI_PODF(0x1ff) | PDR0_PER_PODF(7) | + PDR0_HSP_PODF(3) | PDR0_NFC_PODF(5) | + PDR0_IPG_PODF(1) | PDR0_MAX_PODF(3) | + PDR0_MCU_PODF(0), &ccm->pdr0); + writel(PLL_PD(0) | PLL_MFD(51) | PLL_MFI(10) | PLL_MFN(12), + &ccm->mpctl); + writel(PLL_PD(1) | PLL_MFD(4) | PLL_MFI(12) | PLL_MFN(1), + &ccm->spctl); +} + +/* DRAM configuration */ + +#define ESDMISC_MDDR_SETUP 0x00000004 +#define ESDMISC_MDDR_RESET_DL 0x0000000c +/* + * decoding magic 0x6ac73a = 0b 0110 1010 1100 0111 0011 1010 below: + * tXP = 11, tWTR = 0, tRP = 10, tMRD = 10 + * tWR = 1, tRAS = 100, tRRD = 01, tCAS = 11 + * tRCD = 011, tRC = 010 + * note: all but tWTR (1), tRC (111) are reset defaults, + * the same values work in the jtag configuration + * + * Bluetechnix setup has 0x75e73a (for 128MB) = + * 0b 0111 0101 1110 0111 0011 1010 + * tXP = 11, tWTR = 1, tRP = 01, tMRD = 01 + * tWR = 1, tRAS = 110, tRRD = 01, tCAS = 11 + * tRCD = 011, tRC = 010 + */ +#define ESDCFG0_MDDR_SETUP 0x006ac73a +#define ESDCTL_ROW_COL (ESDCTL_SDE | ESDCTL_ROW(2) | ESDCTL_COL(2)) +#define ESDCTL_SETTINGS (ESDCTL_ROW_COL | ESDCTL_SREFR(3) | \ + ESDCTL_DSIZ(2) | ESDCTL_BL(1)) +#define ESDCTL_PRECHARGE (ESDCTL_ROW_COL | ESDCTL_CMD_PRECHARGE) +#define ESDCTL_AUTOREFRESH (ESDCTL_ROW_COL | ESDCTL_CMD_AUTOREFRESH) +#define ESDCTL_LOADMODEREG (ESDCTL_ROW_COL | ESDCTL_CMD_LOADMODEREG) +#define ESDCTL_RW ESDCTL_SETTINGS + +static void board_setup_sdram(void) +{ + u32 *pad; + struct esdc_regs *esdc = (struct esdc_regs *)ESDCTL_BASE_ADDR; + + /* + * setup pad control for the controller pins + * no loopback, no pull, no keeper, no open drain, + * standard input, standard drive, slow slew rate + */ + for (pad = (u32 *) IOMUXC_SW_PAD_CTL_SDCKE1_SDCLK_SDCLK_B; + pad <= (u32 *) IOMUXC_SW_PAD_CTL_VPG0_VPG1_A0; pad++) + *pad = 0; + + /* set up MX31 DDR Memory Controller */ + writel(ESDMISC_MDDR_SETUP, &esdc->misc); + writel(ESDCFG0_MDDR_SETUP, &esdc->cfg0); + + /* perform DDR init sequence for CSD0 */ + writel(ESDCTL_PRECHARGE, &esdc->ctl0); + writel(0x12344321, CSD0_BASE+0x0f00); + writel(ESDCTL_AUTOREFRESH, &esdc->ctl0); + writel(0x12344321, CSD0_BASE); + writel(0x12344321, CSD0_BASE); + writel(ESDCTL_LOADMODEREG, &esdc->ctl0); + writeb(0xda, CSD0_BASE+0x33); + writeb(0xff, CSD0_BASE+0x1000000); + writel(ESDCTL_RW, &esdc->ctl0); + writel(0xDEADBEEF, CSD0_BASE); + writel(ESDMISC_MDDR_RESET_DL, &esdc->misc); +} + +static void tt01_spi3_hw_init(void) +{ + /* CSPI3 */ + mx31_gpio_mux(IOMUX_MODE(MUX_CTL_CSPI3_MISO, MUX_CTL_FUNC)); + mx31_gpio_mux(IOMUX_MODE(MUX_CTL_CSPI3_MOSI, MUX_CTL_FUNC)); + mx31_gpio_mux(IOMUX_MODE(MUX_CTL_CSPI3_SCLK, MUX_CTL_FUNC)); + /* CSPI3, SS0 = Atlas */ + mx31_gpio_mux(IOMUX_MODE(MUX_CTL_CSPI2_SS0, MUX_CTL_ALT1)); + + /* start CSPI3 clock (3 = always on except if PLL off) */ + setbits_le32(CCM_CGR0, 3 << 16); +} + +int dram_init(void) +{ + /* dram_init must store complete ramsize in gd->ram_size */ + gd->ram_size = get_ram_size((long *) CONFIG_SYS_SDRAM_BASE, + PHYS_SDRAM_1_SIZE); + return 0; +} + +int board_early_init_f(void) +{ + /* CS4: FPGA incl. network controller */ + struct mxc_weimcs cs4 = { + /* sp wp bcd bcs psz pme sync dol cnc wsc ew wws edc */ + CSCR_U(0, 0, 0, 0, 0, 0, 0, 0, 3, 28, 1, 7, 6), + /* oea oen ebwa ebwn csa ebc dsz csn psr cre wrap csen */ + CSCR_L(4, 4, 4, 10, 4, 0, 5, 4, 0, 0, 0, 1), + /* ebra ebrn rwa rwn mum lah lbn lba dww dct wwu age cnc2 fce*/ + CSCR_A(4, 4, 4, 4, 0, 1, 4, 3, 0, 0, 0, 0, 1, 0) + }; + + /* this seems essential, won't start without, but why? */ + writel(IPU_CONF_DI_EN, (u32 *) IPU_CONF); + + board_setup_clocks(); + board_setup_sdram(); + mxc_setup_weimcs(4, &cs4); + + /* Setup UART2 and SPI3 pins */ + mx31_uart2_hw_init(); + tt01_spi3_hw_init(); + + return 0; +} + +int board_init(void) +{ + /* address of boot parameters */ + gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; + return 0; +} + +int board_late_init(void) +{ + pmic_init(); + +#ifdef CONFIG_HW_WATCHDOG + mxc_hw_watchdog_enable(); +#endif + + return 0; +} + +int checkboard(void) +{ + puts(BOARD_STRING "\n"); + return 0; +} + +int board_eth_init(bd_t *bis) +{ + int rc = 0; +#ifdef CONFIG_SMC911X + rc = smc911x_initialize(0, CONFIG_SMC911X_BASE); +#endif + return rc; +} diff --git a/board/karo/tx25/tx25.c b/board/karo/tx25/tx25.c index d3d8ea5..2a29943 100644 --- a/board/karo/tx25/tx25.c +++ b/board/karo/tx25/tx25.c @@ -140,7 +140,6 @@ int board_init() mx25_uart1_init_pins(); #endif /* board id for linux */ - gd->bd->bi_arch_number = MACH_TYPE_TX25; gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; return 0; } diff --git a/board/keymile/km_arm/km_arm.c b/board/keymile/km_arm/km_arm.c index 6ef5e5d..ca33aae 100644 --- a/board/keymile/km_arm/km_arm.c +++ b/board/keymile/km_arm/km_arm.c @@ -207,8 +207,14 @@ int misc_init_r(void) if (wait_for_ne != NULL) { if (strcmp(wait_for_ne, "true") == 0) { int cnt = 0; + int abort = 0; puts("NE go: "); while (startup_allowed() == 0) { + if (tstc()) { + (void) getc(); /* consume input */ + abort = 1; + break; + } udelay(200000); cnt++; if (cnt == 5) @@ -218,7 +224,10 @@ int misc_init_r(void) puts(" \b\b\b\b"); } } - puts("OK\n"); + if (abort == 1) + printf("\nAbort waiting for ne\n"); + else + puts("OK\n"); } } #endif @@ -258,17 +267,17 @@ int board_early_init_f(void) kw_gpio_set_valid(KM_KIRKWOOD_ENV_WP, 38); kw_gpio_direction_output(KM_KIRKWOOD_ENV_WP, 1); #endif - +#if defined(CONFIG_KM_RECONFIG_XLX) + /* trigger the reconfiguration of the xilinx fpga */ + kw_gpio_set_valid(KM_XLX_PROGRAM_B_PIN, 1); + kw_gpio_direction_output(KM_XLX_PROGRAM_B_PIN, 0); + kw_gpio_direction_input(KM_XLX_PROGRAM_B_PIN); +#endif return 0; } int board_init(void) { - /* - * arch number of board - */ - gd->bd->bi_arch_number = MACH_TYPE_KM_KIRKWOOD; - /* address of boot parameters */ gd->bd->bi_boot_params = kw_sdram_bar(0) + 0x100; @@ -396,6 +405,15 @@ int hush_init_var(void) #endif #if defined(CONFIG_BOOTCOUNT_LIMIT) +const ulong patterns[] = { 0x00000000, + 0xFFFFFFFF, + 0xFF00FF00, + 0x0F0F0F0F, + 0xF0F0F0F0}; +const ulong NBR_OF_PATTERNS = sizeof(patterns)/sizeof(*patterns); +const ulong OFFS_PATTERN = 3; +const ulong REPEAT_PATTERN = 1000; + void bootcount_store(ulong a) { volatile ulong *save_addr; @@ -407,21 +425,34 @@ void bootcount_store(ulong a) save_addr = (ulong*)(size - BOOTCOUNT_ADDR); writel(a, save_addr); writel(BOOTCOUNT_MAGIC, &save_addr[1]); + + for (i = 0; i < REPEAT_PATTERN; i++) + writel(patterns[i % NBR_OF_PATTERNS], + &save_addr[i+OFFS_PATTERN]); + } ulong bootcount_load(void) { volatile ulong *save_addr; volatile ulong size = 0; - int i; + ulong counter = 0; + int i, tmp; + for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) { size += gd->bd->bi_dram[i].size; } save_addr = (ulong*)(size - BOOTCOUNT_ADDR); - if (readl(&save_addr[1]) != BOOTCOUNT_MAGIC) - return 0; - else - return readl(save_addr); + + counter = readl(&save_addr[0]); + + /* Is the counter reliable, check in the big pattern for bit errors */ + for (i = 0; (i < REPEAT_PATTERN) && (counter != 0); i++) { + tmp = readl(&save_addr[i+OFFS_PATTERN]); + if (tmp != patterns[i % NBR_OF_PATTERNS]) + counter = 0; + } + return counter; } #endif diff --git a/board/matrix_vision/mvblx/Makefile b/board/matrix_vision/mvblx/Makefile new file mode 100644 index 0000000..01cb517 --- /dev/null +++ b/board/matrix_vision/mvblx/Makefile @@ -0,0 +1,53 @@ +# +# (C) Copyright 2000, 2001, 2002 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).o + +COBJS-y += mvblx.o fpga.o +COBJS-$(CONFIG_ID_EEPROM) += sys_eeprom.o +COBJS := $(COBJS-y) + +SRCS := $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) + +CFLAGS += -Werror + +$(LIB): $(obj).depend $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + +clean: + rm -f $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/matrix_vision/mvblx/config.mk b/board/matrix_vision/mvblx/config.mk new file mode 100644 index 0000000..cf055db --- /dev/null +++ b/board/matrix_vision/mvblx/config.mk @@ -0,0 +1,33 @@ +# +# (C) Copyright 2006 +# Texas Instruments, <www.ti.com> +# +# Beagle Board uses OMAP3 (ARM-CortexA8) cpu +# see http://www.ti.com/ for more information on Texas Instruments +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# +# Physical Address: +# 8000'0000 (bank0) +# A000/0000 (bank1) +# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000 +# (mem base + reserved) + +# For use with external or internal boots. +CONFIG_SYS_TEXT_BASE = 0x80008000 diff --git a/board/matrix_vision/mvblx/fpga.c b/board/matrix_vision/mvblx/fpga.c new file mode 100644 index 0000000..dacc138 --- /dev/null +++ b/board/matrix_vision/mvblx/fpga.c @@ -0,0 +1,219 @@ +/* + * (C) Copyright 2002 + * Rich Ireland, Enterasys Networks, rireland@enterasys.com. + * Keith Outwater, keith_outwater@mvis.com. + * + * (C) Copyright 2011 + * Andre Schwarz, Matrix Vision GmbH, andre.schwarz@matrix-vision.de + * Michael Jones, Matrix Vision GmbH, michael.jones@matrix-vision.de + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +#include <common.h> +#include <ACEX1K.h> +#include <command.h> +#include <asm/gpio.h> +#include "fpga.h" + +#ifdef FPGA_DEBUG +#define fpga_debug(fmt, args...) printf("%s: "fmt, __func__, ##args) +#else +#define fpga_debug(fmt, args...) +#endif + +Altera_CYC2_Passive_Serial_fns altera_fns = { + fpga_null_fn, /* Altera_pre_fn */ + fpga_config_fn, + fpga_status_fn, + fpga_done_fn, + fpga_wr_fn, + fpga_null_fn, + fpga_null_fn, +}; + +Altera_desc cyclone2 = { + Altera_CYC2, + fast_passive_parallel, + Altera_EP3C5_SIZE, + (void *) &altera_fns, + NULL, + 0 +}; + +#define GPIO_RESET 43 +#define GPIO_DCLK 65 +#define GPIO_nSTATUS 157 +#define GPIO_CONF_DONE 158 +#define GPIO_nCONFIG 159 +#define GPIO_DATA0 54 +#define GPIO_DATA1 55 +#define GPIO_DATA2 56 +#define GPIO_DATA3 57 +#define GPIO_DATA4 58 +#define GPIO_DATA5 60 +#define GPIO_DATA6 61 +#define GPIO_DATA7 62 + +DECLARE_GLOBAL_DATA_PTR; + +/* return FPGA_SUCCESS on success, else FPGA_FAIL + */ +int mvblx_init_fpga(void) +{ + fpga_debug("Initializing FPGA interface\n"); + fpga_init(); + fpga_add(fpga_altera, &cyclone2); + + if (gpio_request(GPIO_DCLK, "dclk") || + gpio_request(GPIO_nSTATUS, "nStatus") || +#ifndef CONFIG_SYS_FPGA_DONT_USE_CONF_DONE + gpio_request(GPIO_CONF_DONE, "conf_done") || +#endif + gpio_request(GPIO_nCONFIG, "nConfig") || + gpio_request(GPIO_DATA0, "data0") || + gpio_request(GPIO_DATA1, "data1") || + gpio_request(GPIO_DATA2, "data2") || + gpio_request(GPIO_DATA3, "data3") || + gpio_request(GPIO_DATA4, "data4") || + gpio_request(GPIO_DATA5, "data5") || + gpio_request(GPIO_DATA6, "data6") || + gpio_request(GPIO_DATA7, "data7")) { + printf("%s: error requesting GPIOs.", __func__); + return FPGA_FAIL; + } + + /* set up outputs */ + gpio_direction_output(GPIO_DCLK, 0); + gpio_direction_output(GPIO_nCONFIG, 0); + gpio_direction_output(GPIO_DATA0, 0); + gpio_direction_output(GPIO_DATA1, 0); + gpio_direction_output(GPIO_DATA2, 0); + gpio_direction_output(GPIO_DATA3, 0); + gpio_direction_output(GPIO_DATA4, 0); + gpio_direction_output(GPIO_DATA5, 0); + gpio_direction_output(GPIO_DATA6, 0); + gpio_direction_output(GPIO_DATA7, 0); + + /* NB omap_free_gpio() resets to an input, so we can't + * free ie. nCONFIG, or else the FPGA would reset + * Q: presumably gpio_free() has the same effect? + */ + + /* set up inputs */ + gpio_direction_input(GPIO_nSTATUS); +#ifndef CONFIG_SYS_FPGA_DONT_USE_CONF_DONE + gpio_direction_input(GPIO_CONF_DONE); +#endif + + fpga_config_fn(0, 1, 0); + udelay(60); + + return FPGA_SUCCESS; +} + +int fpga_null_fn(int cookie) +{ + return 0; +} + +int fpga_config_fn(int assert, int flush, int cookie) +{ + fpga_debug("SET config : %s=%d\n", assert ? "low" : "high", assert); + if (flush) { + gpio_set_value(GPIO_nCONFIG, !assert); + udelay(1); + gpio_set_value(GPIO_nCONFIG, assert); + } + + return assert; +} + +int fpga_done_fn(int cookie) +{ + int result = 0; + + /* since revA of BLX, we will not get this signal. */ + udelay(10); +#ifdef CONFIG_SYS_FPGA_DONT_USE_CONF_DONE + fpga_debug("not waiting for CONF_DONE."); + result = 1; +#else + fpga_debug("CONF_DONE check ... "); + if (gpio_get_value(GPIO_CONF_DONE)) { + fpga_debug("high\n"); + result = 1; + } else + fpga_debug("low\n"); + gpio_free(GPIO_CONF_DONE); +#endif + + return result; +} + +int fpga_status_fn(int cookie) +{ + int result = 0; + fpga_debug("STATUS check ... "); + + result = gpio_get_value(GPIO_nSTATUS); + + if (result < 0) + fpga_debug("error\n"); + else if (result > 0) + fpga_debug("high\n"); + else + fpga_debug("low\n"); + + return result; +} + +static inline int _write_fpga(u8 byte) +{ + gpio_set_value(GPIO_DATA0, byte & 0x01); + gpio_set_value(GPIO_DATA1, (byte >> 1) & 0x01); + gpio_set_value(GPIO_DATA2, (byte >> 2) & 0x01); + gpio_set_value(GPIO_DATA3, (byte >> 3) & 0x01); + gpio_set_value(GPIO_DATA4, (byte >> 4) & 0x01); + gpio_set_value(GPIO_DATA5, (byte >> 5) & 0x01); + gpio_set_value(GPIO_DATA6, (byte >> 6) & 0x01); + gpio_set_value(GPIO_DATA7, (byte >> 7) & 0x01); + + /* clock */ + gpio_set_value(GPIO_DCLK, 1); + udelay(1); + gpio_set_value(GPIO_DCLK, 0); + udelay(1); + + return 0; +} + +int fpga_wr_fn(const void *buf, size_t len, int flush, int cookie) +{ + unsigned char *data = (unsigned char *) buf; + int i; + + fpga_debug("fpga_wr: buf %p / size %d\n", buf, len); + for (i = 0; i < len; i++) + _write_fpga(data[i]); + fpga_debug("-%s\n", __func__); + + return FPGA_SUCCESS; +} diff --git a/board/matrix_vision/mvblx/fpga.h b/board/matrix_vision/mvblx/fpga.h new file mode 100644 index 0000000..3d427bf --- /dev/null +++ b/board/matrix_vision/mvblx/fpga.h @@ -0,0 +1,32 @@ +/* + * (C) Copyright 2002 + * Rich Ireland, Enterasys Networks, rireland@enterasys.com. + * Keith Outwater, keith_outwater@mvis.com. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +extern int mvblx_init_fpga(void); + +extern int fpga_status_fn(int cookie); +extern int fpga_config_fn(int assert, int flush, int cookie); +extern int fpga_done_fn(int cookie); +extern int fpga_wr_fn(const void *buf, size_t len, int flush, int cookie); +extern int fpga_null_fn(int cookie); diff --git a/board/matrix_vision/mvblx/mvblx.c b/board/matrix_vision/mvblx/mvblx.c new file mode 100644 index 0000000..74b5b19 --- /dev/null +++ b/board/matrix_vision/mvblx/mvblx.c @@ -0,0 +1,169 @@ +/* + * MATRIX VISION GmbH mvBlueLYNX-X + * + * Derived from Beagle and Overo + * + * (C) Copyright 2004-2008 + * Texas Instruments, <www.ti.com> + * + * Author : + * Sunil Kumar <sunilsaini05@gmail.com> + * Shashi Ranjan <shashiranjanmca05@gmail.com> + * + * Derived from Beagle Board and 3430 SDP code by + * Richard Woodruff <r-woodruff2@ti.com> + * Syed Mohammed Khasim <khasim@ti.com> + * + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <common.h> +#include <netdev.h> +#include <twl4030.h> +#include <asm/io.h> +#include <asm/arch/mem.h> +#include <asm/arch/mmc_host_def.h> +#include <asm/arch/mux.h> +#include <asm/arch/sys_proto.h> +#include <asm/arch/gpio.h> +#include <asm/mach-types.h> +#include "mvblx.h" +#include "fpga.h" + +DECLARE_GLOBAL_DATA_PTR; + +#if defined(CONFIG_CMD_NET) +static void setup_net_chip(void); +#endif /* CONFIG_CMD_NET */ + +/* + * Routine: board_init + * Description: Early hardware init. + */ +int board_init(void) +{ + gpmc_init(); /* in SRAM or SDRAM, finish GPMC */ + /* boot param addr */ + gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100); + + return 0; +} + +/* + * Routine: misc_init_r + * Description: Configure board specific parts + */ +int misc_init_r(void) +{ + printf("mvBlueLYNX-X\n"); + if (get_cpu_family() == CPU_OMAP36XX) + setenv("mpurate", "1000"); + else + setenv("mpurate", "600"); + + twl4030_power_init(); + +#if defined(CONFIG_CMD_NET) + setup_net_chip(); +#endif /* CONFIG_CMD_NET */ + + mvblx_init_fpga(); + + mac_read_from_eeprom(); + + dieid_num_r(); + + return 0; +} + +/* + * Routine: set_muxconf_regs + * Description: Setting up the configuration Mux registers specific to the + * hardware. Many pins need to be moved from protect to primary + * mode. + */ +void set_muxconf_regs(void) +{ + MUX_MVBLX(); +} + +#ifdef CONFIG_GENERIC_MMC +int board_mmc_init(bd_t *bis) +{ + omap_mmc_init(0); + omap_mmc_init(1); + return 0; +} +#endif + +#if defined(CONFIG_CMD_NET) +/* + * Routine: setup_net_chip + * Description: Setting up the configuration GPMC registers specific to the + * Ethernet hardware. + */ +static void setup_net_chip(void) +{ + struct gpio *gpio5_base = (struct gpio *)OMAP34XX_GPIO5_BASE; + struct ctrl *ctrl_base = (struct ctrl *)OMAP34XX_CTRL_BASE; + + /* Configure GPMC registers */ + writel(NET_GPMC_CONFIG1, &gpmc_cfg->cs[0].config1); + writel(NET_GPMC_CONFIG2, &gpmc_cfg->cs[0].config2); + writel(NET_GPMC_CONFIG3, &gpmc_cfg->cs[0].config3); + writel(NET_GPMC_CONFIG4, &gpmc_cfg->cs[0].config4); + writel(NET_GPMC_CONFIG5, &gpmc_cfg->cs[0].config5); + writel(NET_GPMC_CONFIG6, &gpmc_cfg->cs[0].config6); + writel(NET_GPMC_CONFIG7, &gpmc_cfg->cs[0].config7); + + /* Enable off mode for NWE in PADCONF_GPMC_NWE register */ + writew(readw(&ctrl_base->gpmc_nwe) | 0x0E00, &ctrl_base->gpmc_nwe); + /* Enable off mode for NOE in PADCONF_GPMC_NADV_ALE register */ + writew(readw(&ctrl_base->gpmc_noe) | 0x0E00, &ctrl_base->gpmc_noe); + /* Enable off mode for ALE in PADCONF_GPMC_NADV_ALE register */ + writew(readw(&ctrl_base->gpmc_nadv_ale) | 0x0E00, + &ctrl_base->gpmc_nadv_ale); + + /* Make GPIO 139 as output pin */ + writel(readl(&gpio5_base->oe) & ~(GPIO11), &gpio5_base->oe); + + /* Now send a pulse on the GPIO pin */ + writel(GPIO11, &gpio5_base->setdataout); + udelay(1); + writel(GPIO11, &gpio5_base->cleardataout); + udelay(1); + writel(GPIO11, &gpio5_base->setdataout); +} + +int board_eth_init(bd_t *bis) +{ + int rc = 0; +#ifdef CONFIG_SMC911X + rc = smc911x_initialize(0, CONFIG_SMC911X_BASE); +#endif + return rc; +} + +int overwrite_console(void) +{ + /* return TRUE if console should be overwritten */ + return 0; +} + +#endif /* CONFIG_CMD_NET */ diff --git a/board/matrix_vision/mvblx/mvblx.h b/board/matrix_vision/mvblx/mvblx.h new file mode 100644 index 0000000..cda5b0b --- /dev/null +++ b/board/matrix_vision/mvblx/mvblx.h @@ -0,0 +1,362 @@ +/* + * (C) Copyright 2008 + * Dirk Behme <dirk.behme@gmail.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef _MVBLX_H_ +#define _MVBLX_H_ + +#include <asm/arch/sys_proto.h> + +const omap3_sysinfo sysinfo = { + DDR_DISCRETE, + "OMAP3 mvBlueLYNX-X camera", + "no NAND", +}; + +/* + * IEN - Input Enable + * IDIS - Input Disable + * PTD - Pull type Down + * PTU - Pull type Up + * DIS - Pull type selection is inactive + * EN - Pull type selection is active + * M0 - Mode 0 + * The commented string gives the final mux configuration for that pin + */ +#define MUX_MVBLX() \ + /*SDRC*/\ + MUX_VAL(CP(SDRC_D0), (IEN | PTD | DIS | M0)) /*SDRC_D0*/\ + MUX_VAL(CP(SDRC_D1), (IEN | PTD | DIS | M0)) /*SDRC_D1*/\ + MUX_VAL(CP(SDRC_D2), (IEN | PTD | DIS | M0)) /*SDRC_D2*/\ + MUX_VAL(CP(SDRC_D3), (IEN | PTD | DIS | M0)) /*SDRC_D3*/\ + MUX_VAL(CP(SDRC_D4), (IEN | PTD | DIS | M0)) /*SDRC_D4*/\ + MUX_VAL(CP(SDRC_D5), (IEN | PTD | DIS | M0)) /*SDRC_D5*/\ + MUX_VAL(CP(SDRC_D6), (IEN | PTD | DIS | M0)) /*SDRC_D6*/\ + MUX_VAL(CP(SDRC_D7), (IEN | PTD | DIS | M0)) /*SDRC_D7*/\ + MUX_VAL(CP(SDRC_D8), (IEN | PTD | DIS | M0)) /*SDRC_D8*/\ + MUX_VAL(CP(SDRC_D9), (IEN | PTD | DIS | M0)) /*SDRC_D9*/\ + MUX_VAL(CP(SDRC_D10), (IEN | PTD | DIS | M0)) /*SDRC_D10*/\ + MUX_VAL(CP(SDRC_D11), (IEN | PTD | DIS | M0)) /*SDRC_D11*/\ + MUX_VAL(CP(SDRC_D12), (IEN | PTD | DIS | M0)) /*SDRC_D12*/\ + MUX_VAL(CP(SDRC_D13), (IEN | PTD | DIS | M0)) /*SDRC_D13*/\ + MUX_VAL(CP(SDRC_D14), (IEN | PTD | DIS | M0)) /*SDRC_D14*/\ + MUX_VAL(CP(SDRC_D15), (IEN | PTD | DIS | M0)) /*SDRC_D15*/\ + MUX_VAL(CP(SDRC_D16), (IEN | PTD | DIS | M0)) /*SDRC_D16*/\ + MUX_VAL(CP(SDRC_D17), (IEN | PTD | DIS | M0)) /*SDRC_D17*/\ + MUX_VAL(CP(SDRC_D18), (IEN | PTD | DIS | M0)) /*SDRC_D18*/\ + MUX_VAL(CP(SDRC_D19), (IEN | PTD | DIS | M0)) /*SDRC_D19*/\ + MUX_VAL(CP(SDRC_D20), (IEN | PTD | DIS | M0)) /*SDRC_D20*/\ + MUX_VAL(CP(SDRC_D21), (IEN | PTD | DIS | M0)) /*SDRC_D21*/\ + MUX_VAL(CP(SDRC_D22), (IEN | PTD | DIS | M0)) /*SDRC_D22*/\ + MUX_VAL(CP(SDRC_D23), (IEN | PTD | DIS | M0)) /*SDRC_D23*/\ + MUX_VAL(CP(SDRC_D24), (IEN | PTD | DIS | M0)) /*SDRC_D24*/\ + MUX_VAL(CP(SDRC_D25), (IEN | PTD | DIS | M0)) /*SDRC_D25*/\ + MUX_VAL(CP(SDRC_D26), (IEN | PTD | DIS | M0)) /*SDRC_D26*/\ + MUX_VAL(CP(SDRC_D27), (IEN | PTD | DIS | M0)) /*SDRC_D27*/\ + MUX_VAL(CP(SDRC_D28), (IEN | PTD | DIS | M0)) /*SDRC_D28*/\ + MUX_VAL(CP(SDRC_D29), (IEN | PTD | DIS | M0)) /*SDRC_D29*/\ + MUX_VAL(CP(SDRC_D30), (IEN | PTD | DIS | M0)) /*SDRC_D30*/\ + MUX_VAL(CP(SDRC_D31), (IEN | PTD | DIS | M0)) /*SDRC_D31*/\ + MUX_VAL(CP(SDRC_CLK), (IEN | PTD | DIS | M0)) /*SDRC_CLK*/\ + MUX_VAL(CP(SDRC_DQS0), (IEN | PTD | DIS | M0)) /*SDRC_DQS0*/\ + MUX_VAL(CP(SDRC_DQS1), (IEN | PTD | DIS | M0)) /*SDRC_DQS1*/\ + MUX_VAL(CP(SDRC_DQS2), (IEN | PTD | DIS | M0)) /*SDRC_DQS2*/\ + MUX_VAL(CP(SDRC_DQS3), (IEN | PTD | DIS | M0)) /*SDRC_DQS3*/\ + /*GPMC*/\ + MUX_VAL(CP(GPMC_A1), (IDIS | PTU | EN | M0)) /*GPMC_A1*/\ + MUX_VAL(CP(GPMC_A2), (IDIS | PTU | EN | M0)) /*GPMC_A2*/\ + MUX_VAL(CP(GPMC_A3), (IDIS | PTU | EN | M0)) /*GPMC_A3*/\ + MUX_VAL(CP(GPMC_A4), (IDIS | PTU | EN | M0)) /*GPMC_A4*/\ + MUX_VAL(CP(GPMC_A5), (IDIS | PTU | EN | M0)) /*GPMC_A5*/\ + MUX_VAL(CP(GPMC_A6), (IDIS | PTU | EN | M0)) /*GPMC_A6*/\ + MUX_VAL(CP(GPMC_A7), (IDIS | PTU | EN | M0)) /*GPMC_A7*/\ + MUX_VAL(CP(GPMC_A8), (IDIS | PTU | EN | M4)) /*GPIO_41*/\ + MUX_VAL(CP(GPMC_A9), (IDIS | PTU | EN | M4)) /*GPIO_42*/\ + MUX_VAL(CP(GPMC_A10), (IDIS | PTU | EN | M4)) /*GPIO_43*/\ + MUX_VAL(CP(GPMC_D0), (IEN | PTU | EN | M0)) /*GPMC_D0*/\ + MUX_VAL(CP(GPMC_D1), (IEN | PTU | EN | M0)) /*GPMC_D1*/\ + MUX_VAL(CP(GPMC_D2), (IEN | PTU | EN | M0)) /*GPMC_D2*/\ + MUX_VAL(CP(GPMC_D3), (IEN | PTU | EN | M0)) /*GPMC_D3*/\ + MUX_VAL(CP(GPMC_D4), (IEN | PTU | EN | M0)) /*GPMC_D4*/\ + MUX_VAL(CP(GPMC_D5), (IEN | PTU | EN | M0)) /*GPMC_D5*/\ + MUX_VAL(CP(GPMC_D6), (IEN | PTU | EN | M0)) /*GPMC_D6*/\ + MUX_VAL(CP(GPMC_D7), (IEN | PTU | EN | M0)) /*GPMC_D7*/\ + MUX_VAL(CP(GPMC_D8), (IEN | PTU | EN | M0)) /*GPMC_D8*/\ + MUX_VAL(CP(GPMC_D9), (IEN | PTU | EN | M0)) /*GPMC_D9*/\ + MUX_VAL(CP(GPMC_D10), (IEN | PTU | EN | M0)) /*GPMC_D10*/\ + MUX_VAL(CP(GPMC_D11), (IEN | PTU | EN | M0)) /*GPMC_D11*/\ + MUX_VAL(CP(GPMC_D12), (IEN | PTU | EN | M0)) /*GPMC_D12*/\ + MUX_VAL(CP(GPMC_D13), (IEN | PTU | EN | M0)) /*GPMC_D13*/\ + MUX_VAL(CP(GPMC_D14), (IEN | PTU | EN | M0)) /*GPMC_D14*/\ + MUX_VAL(CP(GPMC_D15), (IEN | PTU | EN | M0)) /*GPMC_D15*/\ + MUX_VAL(CP(GPMC_NCS0), (IDIS | PTU | EN | M0)) /*GPMC_nCS0*/\ + MUX_VAL(CP(GPMC_NCS1), (IDIS | PTU | EN | M0)) /*GPMC_nCS1*/\ + MUX_VAL(CP(GPMC_NCS2), (IDIS | PTU | EN | M0)) /*GPMC_nCS2*/\ + MUX_VAL(CP(GPMC_NCS3), (IEN | PTU | EN | M4)) /*GPIO54*/\ + MUX_VAL(CP(GPMC_NCS4), (IEN | PTU | EN | M4)) /*GPIO55*/\ + MUX_VAL(CP(GPMC_NCS5), (IEN | PTU | EN | M4)) /*GPIO56*/\ + MUX_VAL(CP(GPMC_NCS6), (IEN | PTU | EN | M4)) /*GPIO57*/\ + MUX_VAL(CP(GPMC_NCS7), (IEN | PTU | EN | M4)) /*GPIO58*/\ + MUX_VAL(CP(GPMC_CLK), (IDIS | PTU | EN | M0)) /*GPMC_CLK*/\ + MUX_VAL(CP(GPMC_NADV_ALE), (IDIS | PTD | DIS | M0)) /*GPMC_nADV_ALE*/\ + MUX_VAL(CP(GPMC_NOE), (IDIS | PTD | DIS | M0)) /*GPMC_nOE*/\ + MUX_VAL(CP(GPMC_NWE), (IDIS | PTD | DIS | M0)) /*GPMC_nWE*/\ + MUX_VAL(CP(GPMC_NBE0_CLE), (IEN | PTU | EN | M4)) /*GPIO60*/\ + MUX_VAL(CP(GPMC_NBE1), (IEN | PTU | EN | M4)) /*GPIO61*/\ + MUX_VAL(CP(GPMC_NWP), (IEN | PTU | EN | M4)) /*GPIO62*/\ + MUX_VAL(CP(GPMC_WAIT0), (IEN | PTU | EN | M0)) /*GPMC_WAIT0*/\ + MUX_VAL(CP(GPMC_WAIT3), (IDIS | PTU | EN | M4)) /*GPIO65*/\ + /*DSS*/\ + MUX_VAL(CP(DSS_PCLK), (IDIS | PTD | DIS | M0)) /*DSS_PCLK*/\ + MUX_VAL(CP(DSS_HSYNC), (IDIS | PTD | DIS | M0)) /*DSS_HSYNC*/\ + MUX_VAL(CP(DSS_VSYNC), (IDIS | PTD | DIS | M0)) /*DSS_VSYNC*/\ + MUX_VAL(CP(DSS_ACBIAS), (IDIS | PTD | DIS | M0)) /*DSS_ACBIAS*/\ + MUX_VAL(CP(DSS_DATA0), (IDIS | PTD | DIS | M4)) /*not_used*/\ + MUX_VAL(CP(DSS_DATA1), (IDIS | PTD | DIS | M4)) /*not_used*/\ + MUX_VAL(CP(DSS_DATA2), (IDIS | PTD | DIS | M4)) /*not_used*/\ + MUX_VAL(CP(DSS_DATA3), (IDIS | PTD | DIS | M4)) /*not_used*/\ + MUX_VAL(CP(DSS_DATA4), (IDIS | PTD | DIS | M4)) /*not_used*/\ + MUX_VAL(CP(DSS_DATA5), (IDIS | PTD | DIS | M4)) /*not_used*/\ + MUX_VAL(CP(DSS_DATA6), (IDIS | PTD | DIS | M0)) /*DSS_DATA6*/\ + MUX_VAL(CP(DSS_DATA7), (IDIS | PTD | DIS | M0)) /*DSS_DATA7*/\ + MUX_VAL(CP(DSS_DATA8), (IDIS | PTD | DIS | M0)) /*DSS_DATA8*/\ + MUX_VAL(CP(DSS_DATA9), (IDIS | PTD | DIS | M0)) /*DSS_DATA9*/\ + MUX_VAL(CP(DSS_DATA10), (IDIS | PTD | DIS | M0)) /*DSS_DATA10*/\ + MUX_VAL(CP(DSS_DATA11), (IDIS | PTD | DIS | M0)) /*DSS_DATA11*/\ + MUX_VAL(CP(DSS_DATA12), (IDIS | PTD | DIS | M0)) /*DSS_DATA12*/\ + MUX_VAL(CP(DSS_DATA13), (IDIS | PTD | DIS | M0)) /*DSS_DATA13*/\ + MUX_VAL(CP(DSS_DATA14), (IDIS | PTD | DIS | M0)) /*DSS_DATA14*/\ + MUX_VAL(CP(DSS_DATA15), (IDIS | PTD | DIS | M0)) /*DSS_DATA15*/\ + MUX_VAL(CP(DSS_DATA16), (IDIS | PTD | DIS | M0)) /*DSS_DATA16*/\ + MUX_VAL(CP(DSS_DATA17), (IDIS | PTD | DIS | M0)) /*DSS_DATA17*/\ + MUX_VAL(CP(DSS_DATA18), (IDIS | PTD | DIS | M3)) /*DSS_DATA0*/\ + MUX_VAL(CP(DSS_DATA19), (IDIS | PTD | DIS | M3)) /*DSS_DATA1*/\ + MUX_VAL(CP(DSS_DATA20), (IDIS | PTD | DIS | M3)) /*DSS_DATA2*/\ + MUX_VAL(CP(DSS_DATA21), (IDIS | PTD | DIS | M3)) /*DSS_DATA3*/\ + MUX_VAL(CP(DSS_DATA22), (IDIS | PTD | DIS | M3)) /*DSS_DATA4*/\ + MUX_VAL(CP(DSS_DATA23), (IDIS | PTD | DIS | M3)) /*DSS_DATA5*/\ + /*CAMERA*/\ + MUX_VAL(CP(CAM_HS), (IEN | PTU | EN | M0)) /*CAM_HS */\ + MUX_VAL(CP(CAM_VS), (IEN | PTU | EN | M0)) /*CAM_VS */\ + MUX_VAL(CP(CAM_XCLKA), (IDIS | PTD | DIS | M0)) /*CAM_XCLKA*/\ + MUX_VAL(CP(CAM_PCLK), (IEN | PTU | EN | M0)) /*CAM_PCLK*/\ + MUX_VAL(CP(CAM_FLD), (IDIS | PTD | DIS | M4)) /*GPIO_98*/\ + MUX_VAL(CP(CAM_D0), (IEN | PTD | DIS | M0)) /*CAM_D0*/\ + MUX_VAL(CP(CAM_D1), (IEN | PTD | DIS | M0)) /*CAM_D1*/\ + MUX_VAL(CP(CAM_D2), (IEN | PTD | DIS | M0)) /*CAM_D2*/\ + MUX_VAL(CP(CAM_D3), (IEN | PTD | DIS | M0)) /*CAM_D3*/\ + MUX_VAL(CP(CAM_D4), (IEN | PTD | DIS | M0)) /*CAM_D4*/\ + MUX_VAL(CP(CAM_D5), (IEN | PTD | DIS | M0)) /*CAM_D5*/\ + MUX_VAL(CP(CAM_D6), (IEN | PTD | DIS | M0)) /*CAM_D6*/\ + MUX_VAL(CP(CAM_D7), (IEN | PTD | DIS | M0)) /*CAM_D7*/\ + MUX_VAL(CP(CAM_D8), (IEN | PTD | DIS | M0)) /*CAM_D8*/\ + MUX_VAL(CP(CAM_D9), (IEN | PTD | DIS | M0)) /*CAM_D9*/\ + MUX_VAL(CP(CAM_D10), (IEN | PTD | DIS | M0)) /*CAM_D10*/\ + MUX_VAL(CP(CAM_D11), (IEN | PTD | DIS | M0)) /*CAM_D11*/\ + MUX_VAL(CP(CAM_XCLKB), (IDIS | PTD | DIS | M0)) /*CAM_XCLKB*/\ + MUX_VAL(CP(CAM_WEN), (IEN | PTD | DIS | M4)) /*GPIO_167*/\ + MUX_VAL(CP(CAM_STROBE), (IDIS | PTD | DIS | M0)) /*CAM_STROBE*/\ + MUX_VAL(CP(CSI2_DX0), (IEN | PTD | DIS | M0)) /*CSI2_DX0*/\ + MUX_VAL(CP(CSI2_DY0), (IEN | PTD | DIS | M0)) /*CSI2_DY0*/\ + MUX_VAL(CP(CSI2_DX1), (IEN | PTD | DIS | M0)) /*CSI2_DX1*/\ + MUX_VAL(CP(CSI2_DY1), (IEN | PTD | DIS | M0)) /*CSI2_DY1*/\ + /*Audio Interface */\ + MUX_VAL(CP(MCBSP2_FSX), (IEN | PTD | DIS | M0)) /*McBSP2_FSX*/\ + MUX_VAL(CP(MCBSP2_CLKX), (IEN | PTD | DIS | M0)) /*McBSP2_CLKX*/\ + MUX_VAL(CP(MCBSP2_DR), (IEN | PTD | DIS | M0)) /*McBSP2_DR*/\ + MUX_VAL(CP(MCBSP2_DX), (IDIS | PTD | DIS | M0)) /*McBSP2_DX*/\ + /*Expansion card 1*/\ + MUX_VAL(CP(MMC1_CLK), (IDIS | PTU | EN | M0)) /*MMC1_CLK*/\ + MUX_VAL(CP(MMC1_CMD), (IEN | PTU | EN | M0)) /*MMC1_CMD*/\ + MUX_VAL(CP(MMC1_DAT0), (IEN | PTU | EN | M0)) /*MMC1_DAT0*/\ + MUX_VAL(CP(MMC1_DAT1), (IEN | PTU | EN | M0)) /*MMC1_DAT1*/\ + MUX_VAL(CP(MMC1_DAT2), (IEN | PTU | EN | M0)) /*MMC1_DAT2*/\ + MUX_VAL(CP(MMC1_DAT3), (IEN | PTU | EN | M0)) /*MMC1_DAT3*/\ + MUX_VAL(CP(MMC1_DAT4), (IDIS | PTU | DIS | M4)) /*GPIO_?*/\ + MUX_VAL(CP(MMC1_DAT5), (IDIS | PTU | DIS | M4)) /*GPIO_?*/\ + MUX_VAL(CP(MMC1_DAT6), (IDIS | PTU | DIS | M4)) /*GPIO_?*/\ + MUX_VAL(CP(MMC1_DAT7), (IEN | PTU | DIS | M7)) /*GPIO_129 disabled*/\ + /*Expansion card 2 */\ + MUX_VAL(CP(MMC2_CLK), (IEN | PTU | DIS | M0)) /*MMC2_CLK*/\ + MUX_VAL(CP(MMC2_CMD), (IEN | PTU | DIS | M0)) /*MMC2_CMD*/\ + MUX_VAL(CP(MMC2_DAT0), (IEN | PTU | DIS | M0)) /*MMC2_DAT0*/\ + MUX_VAL(CP(MMC2_DAT1), (IEN | PTU | DIS | M0)) /*MMC2_DAT1*/\ + MUX_VAL(CP(MMC2_DAT2), (IEN | PTU | DIS | M0)) /*MMC2_DAT2*/\ + MUX_VAL(CP(MMC2_DAT3), (IEN | PTU | DIS | M0)) /*MMC2_DAT3*/\ + MUX_VAL(CP(MMC2_DAT4), (IDIS | PTU | DIS | M4)) /*GPIO_136*/\ + MUX_VAL(CP(MMC2_DAT5), (IEN | PTU | EN | M4)) /*GPIO_137*/\ + MUX_VAL(CP(MMC2_DAT6), (IDIS | PTU | DIS | M4)) /*GPIO_138*/\ + MUX_VAL(CP(MMC2_DAT7), (IEN | PTU | EN | M4)) /*GPIO_139*/\ + /*Bluetooth*/\ + MUX_VAL(CP(MCBSP3_DX), (IDIS | PTD | DIS | M1)) /*UART2_CTS*/\ + MUX_VAL(CP(MCBSP3_DR), (IDIS | PTD | DIS | M1)) /*UART2_RTS*/\ + MUX_VAL(CP(MCBSP3_CLKX), (IDIS | PTD | DIS | M1)) /*UART2_TX*/\ + MUX_VAL(CP(MCBSP3_FSX), (IDIS | PTD | DIS | M1)) /*UART2_RX*/\ + /*Modem Interface */\ + MUX_VAL(CP(UART1_TX), (IDIS | PTD | DIS | M0)) /*UART1_TX*/\ + MUX_VAL(CP(UART1_RTS), (IDIS | PTD | DIS | M4)) /*GPIO_149*/ \ + MUX_VAL(CP(UART1_CTS), (IEN | PTU | EN | M4)) /*GPIO_150*/ \ + MUX_VAL(CP(UART1_RX), (IEN | PTD | DIS | M0)) /*UART1_RX*/\ + MUX_VAL(CP(MCBSP1_CLKR), (IDIS | PTD | DIS | M4)) /*GPIO_156*/\ + MUX_VAL(CP(MCBSP1_FSR), (IEN | PTU | EN | M4)) /*GPIO_157*/\ + MUX_VAL(CP(MCBSP1_DX), (IEN | PTU | DIS | M4)) /*GPIO_158 1-wire */\ + MUX_VAL(CP(MCBSP1_DR), (IDIS | PTD | DIS | M4)) /*GPIO_159*/\ + MUX_VAL(CP(MCBSP_CLKS), (IEN | PTU | DIS | M0)) /*McBSP_CLKS*/\ + MUX_VAL(CP(MCBSP1_FSX), (IDIS | PTD | DIS | M4)) /*GPIO_161*/\ + MUX_VAL(CP(MCBSP1_CLKX), (IDIS | PTD | DIS | M4)) /*GPIO_162*/\ + /*Serial Interface*/\ + MUX_VAL(CP(UART3_CTS_RCTX), (IEN | PTD | EN | M0)) /*UART3_CTS_RCTX*/\ + MUX_VAL(CP(UART3_RTS_SD), (IDIS | PTD | DIS | M0)) /*UART3_RTS_SD */\ + MUX_VAL(CP(UART3_RX_IRRX), (IEN | PTD | DIS | M0)) /*UART3_RX_IRRX*/\ + MUX_VAL(CP(UART3_TX_IRTX), (IDIS | PTD | DIS | M0)) /*UART3_TX_IRTX*/\ + MUX_VAL(CP(HSUSB0_CLK), (IEN | PTD | DIS | M0)) /*HSUSB0_CLK*/\ + MUX_VAL(CP(HSUSB0_STP), (IDIS | PTU | EN | M0)) /*HSUSB0_STP*/\ + MUX_VAL(CP(HSUSB0_DIR), (IEN | PTD | DIS | M0)) /*HSUSB0_DIR*/\ + MUX_VAL(CP(HSUSB0_NXT), (IEN | PTD | DIS | M0)) /*HSUSB0_NXT*/\ + MUX_VAL(CP(HSUSB0_DATA0), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA0*/\ + MUX_VAL(CP(HSUSB0_DATA1), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA1*/\ + MUX_VAL(CP(HSUSB0_DATA2), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA2*/\ + MUX_VAL(CP(HSUSB0_DATA3), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA3*/\ + MUX_VAL(CP(HSUSB0_DATA4), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA4*/\ + MUX_VAL(CP(HSUSB0_DATA5), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA5*/\ + MUX_VAL(CP(HSUSB0_DATA6), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA6*/\ + MUX_VAL(CP(HSUSB0_DATA7), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA7*/\ + MUX_VAL(CP(I2C1_SCL), (IEN | PTU | EN | M0)) /*I2C1_SCL*/\ + MUX_VAL(CP(I2C1_SDA), (IEN | PTU | EN | M0)) /*I2C1_SDA*/\ + MUX_VAL(CP(I2C2_SCL), (IEN | PTU | EN | M0)) /*I2C2_SCL*/\ + MUX_VAL(CP(I2C2_SDA), (IEN | PTU | EN | M0)) /*I2C2_SDA*/\ + MUX_VAL(CP(I2C3_SCL), (IEN | PTU | EN | M0)) /*I2C3_SCL*/\ + MUX_VAL(CP(I2C3_SDA), (IEN | PTU | EN | M0)) /*I2C3_SDA*/\ + MUX_VAL(CP(I2C4_SCL), (IEN | PTU | EN | M0)) /*I2C4_SCL*/\ + MUX_VAL(CP(I2C4_SDA), (IEN | PTU | EN | M0)) /*I2C4_SDA*/\ + MUX_VAL(CP(HDQ_SIO), (IDIS | PTU | EN | M4)) /*GPIO_170*/\ + MUX_VAL(CP(MCSPI1_CLK), (IDIS | PTU | DIS | M4)) /*GPIO_171*/\ + MUX_VAL(CP(MCSPI1_SIMO), (IDIS | PTU | DIS | M4)) /*GPIO_172*/\ + MUX_VAL(CP(MCSPI1_SOMI), (IDIS | PTU | DIS | M4)) /*GPIO_173*/\ + MUX_VAL(CP(MCSPI1_CS0), (IDIS | PTD | DIS | M4)) /*GPIO_174*/\ + MUX_VAL(CP(MCSPI1_CS3), (IDIS | PTU | DIS | M4)) /*GPIO_177*/\ + /* USB EHCI (port 2) not used */\ + MUX_VAL(CP(MCSPI2_CLK), (IEN | PTD | DIS | M0)) /*McSPI2_CLK*/\ + MUX_VAL(CP(MCSPI2_SIMO), (IEN | PTD | DIS | M0)) /*McSPI2_SIMO*/\ + MUX_VAL(CP(MCSPI2_SOMI), (IEN | PTD | DIS | M0)) /*McSPI2_SOMI*/\ + MUX_VAL(CP(MCSPI2_CS0), (IEN | PTD | EN | M0)) /*McSPI2_CS0*/\ + MUX_VAL(CP(MCSPI2_CS1), (IEN | PTD | EN | M0)) /*McSPI2_CS1*/\ + /*Control and debug */\ + MUX_VAL(CP(SYS_32K), (IEN | PTD | DIS | M0)) /*SYS_32K*/\ + MUX_VAL(CP(SYS_CLKREQ), (IEN | PTD | DIS | M0)) /*SYS_CLKREQ*/\ + MUX_VAL(CP(SYS_NIRQ), (IEN | PTU | EN | M0)) /*SYS_nIRQ*/\ + MUX_VAL(CP(SYS_BOOT0), (IDIS | PTD | DIS | M3)) /*DSS_DATA18*/\ + MUX_VAL(CP(SYS_BOOT1), (IDIS | PTD | DIS | M3)) /*DSS_DATA19*/\ + MUX_VAL(CP(SYS_BOOT2), (IEN | PTD | DIS | M0)) /*GPIO_4*/\ + MUX_VAL(CP(SYS_BOOT3), (IDIS | PTD | DIS | M3)) /*DSS_DATA20*/\ + MUX_VAL(CP(SYS_BOOT4), (IDIS | PTD | DIS | M3)) /*DSS_DATA21*/\ + MUX_VAL(CP(SYS_BOOT5), (IDIS | PTD | DIS | M3)) /*DSS_DATA22*/\ + MUX_VAL(CP(SYS_BOOT6), (IDIS | PTD | DIS | M3)) /*DSS_DATA23*/ \ + MUX_VAL(CP(SYS_OFF_MODE), (IEN | PTD | DIS | M0)) /*SYS_OFF_MODE*/\ + MUX_VAL(CP(SYS_CLKOUT1), (IDIS | PTD | DIS | M4)) /*GPIO_10*/\ + MUX_VAL(CP(SYS_CLKOUT2), (IEN | PTD | DIS | M0)) /*SYS_CLKOUT2*/\ + /* USB EHCI (port 1) */\ + MUX_VAL(CP(ETK_CLK_ES2), (IDIS | PTU | EN | M3)) /*HSUSB1_STP*/\ + MUX_VAL(CP(ETK_CTL_ES2), (IDIS | PTU | DIS | M3)) /*HSUSB1_CLK*/\ + MUX_VAL(CP(ETK_D0_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_DATA0*/\ + MUX_VAL(CP(ETK_D1_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_DATA1*/\ + MUX_VAL(CP(ETK_D2_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_DATA2*/\ + MUX_VAL(CP(ETK_D3_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_DATA7*/\ + MUX_VAL(CP(ETK_D4_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_DATA4*/\ + MUX_VAL(CP(ETK_D5_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_DATA5*/\ + MUX_VAL(CP(ETK_D6_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_DATA6*/\ + MUX_VAL(CP(ETK_D7_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_DATA3*/\ + MUX_VAL(CP(ETK_D8_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_DIR*/\ + MUX_VAL(CP(ETK_D9_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_NXT*/\ + MUX_VAL(CP(ETK_D10_ES2), (IEN | PTU | EN | M4)) /*GPIO_24*/\ + MUX_VAL(CP(ETK_D11_ES2), (IDIS | PTU | DIS | M4)) /*GPIO_25*/\ + MUX_VAL(CP(ETK_D12_ES2), (IEN | PTU | DIS | M4)) /*GPIO_26*/\ + MUX_VAL(CP(ETK_D13_ES2), (IEN | PTU | DIS | M4)) /*GPIO_27*/\ + MUX_VAL(CP(ETK_D14_ES2), (IEN | PTU | DIS | M4)) /*GPIO_28*/\ + MUX_VAL(CP(ETK_D15_ES2), (IEN | PTU | DIS | M4)) /*GPIO_29*/\ + /*Die to Die */\ + MUX_VAL(CP(D2D_MCAD1), (IEN | PTD | EN | M0)) /*d2d_mcad1*/\ + MUX_VAL(CP(D2D_MCAD2), (IEN | PTD | EN | M0)) /*d2d_mcad2*/\ + MUX_VAL(CP(D2D_MCAD3), (IEN | PTD | EN | M0)) /*d2d_mcad3*/\ + MUX_VAL(CP(D2D_MCAD4), (IEN | PTD | EN | M0)) /*d2d_mcad4*/\ + MUX_VAL(CP(D2D_MCAD5), (IEN | PTD | EN | M0)) /*d2d_mcad5*/\ + MUX_VAL(CP(D2D_MCAD6), (IEN | PTD | EN | M0)) /*d2d_mcad6*/\ + MUX_VAL(CP(D2D_MCAD7), (IEN | PTD | EN | M0)) /*d2d_mcad7*/\ + MUX_VAL(CP(D2D_MCAD8), (IEN | PTD | EN | M0)) /*d2d_mcad8*/\ + MUX_VAL(CP(D2D_MCAD9), (IEN | PTD | EN | M0)) /*d2d_mcad9*/\ + MUX_VAL(CP(D2D_MCAD10), (IEN | PTD | EN | M0)) /*d2d_mcad10*/\ + MUX_VAL(CP(D2D_MCAD11), (IEN | PTD | EN | M0)) /*d2d_mcad11*/\ + MUX_VAL(CP(D2D_MCAD12), (IEN | PTD | EN | M0)) /*d2d_mcad12*/\ + MUX_VAL(CP(D2D_MCAD13), (IEN | PTD | EN | M0)) /*d2d_mcad13*/\ + MUX_VAL(CP(D2D_MCAD14), (IEN | PTD | EN | M0)) /*d2d_mcad14*/\ + MUX_VAL(CP(D2D_MCAD15), (IEN | PTD | EN | M0)) /*d2d_mcad15*/\ + MUX_VAL(CP(D2D_MCAD16), (IEN | PTD | EN | M0)) /*d2d_mcad16*/\ + MUX_VAL(CP(D2D_MCAD17), (IEN | PTD | EN | M0)) /*d2d_mcad17*/\ + MUX_VAL(CP(D2D_MCAD18), (IEN | PTD | EN | M0)) /*d2d_mcad18*/\ + MUX_VAL(CP(D2D_MCAD19), (IEN | PTD | EN | M0)) /*d2d_mcad19*/\ + MUX_VAL(CP(D2D_MCAD20), (IEN | PTD | EN | M0)) /*d2d_mcad20*/\ + MUX_VAL(CP(D2D_MCAD21), (IEN | PTD | EN | M0)) /*d2d_mcad21*/\ + MUX_VAL(CP(D2D_MCAD22), (IEN | PTD | EN | M0)) /*d2d_mcad22*/\ + MUX_VAL(CP(D2D_MCAD23), (IEN | PTD | EN | M0)) /*d2d_mcad23*/\ + MUX_VAL(CP(D2D_MCAD24), (IEN | PTD | EN | M0)) /*d2d_mcad24*/\ + MUX_VAL(CP(D2D_MCAD25), (IEN | PTD | EN | M0)) /*d2d_mcad25*/\ + MUX_VAL(CP(D2D_MCAD26), (IEN | PTD | EN | M0)) /*d2d_mcad26*/\ + MUX_VAL(CP(D2D_MCAD27), (IEN | PTD | EN | M0)) /*d2d_mcad27*/\ + MUX_VAL(CP(D2D_MCAD28), (IEN | PTD | EN | M0)) /*d2d_mcad28*/\ + MUX_VAL(CP(D2D_MCAD29), (IEN | PTD | EN | M0)) /*d2d_mcad29*/\ + MUX_VAL(CP(D2D_MCAD30), (IEN | PTD | EN | M0)) /*d2d_mcad30*/\ + MUX_VAL(CP(D2D_MCAD31), (IEN | PTD | EN | M0)) /*d2d_mcad31*/\ + MUX_VAL(CP(D2D_MCAD32), (IEN | PTD | EN | M0)) /*d2d_mcad32*/\ + MUX_VAL(CP(D2D_MCAD33), (IEN | PTD | EN | M0)) /*d2d_mcad33*/\ + MUX_VAL(CP(D2D_MCAD34), (IEN | PTD | EN | M0)) /*d2d_mcad34*/\ + MUX_VAL(CP(D2D_MCAD35), (IEN | PTD | EN | M0)) /*d2d_mcad35*/\ + MUX_VAL(CP(D2D_MCAD36), (IEN | PTD | EN | M0)) /*d2d_mcad36*/\ + MUX_VAL(CP(D2D_CLK26MI), (IEN | PTD | DIS | M0)) /*d2d_clk26mi*/\ + MUX_VAL(CP(D2D_NRESPWRON), (IEN | PTD | EN | M0)) /*d2d_nrespwron*/\ + MUX_VAL(CP(D2D_NRESWARM), (IEN | PTU | EN | M0)) /*d2d_nreswarm */\ + MUX_VAL(CP(D2D_ARM9NIRQ), (IEN | PTD | DIS | M0)) /*d2d_arm9nirq */\ + MUX_VAL(CP(D2D_UMA2P6FIQ), (IEN | PTD | DIS | M0)) /*d2d_uma2p6fiq*/\ + MUX_VAL(CP(D2D_SPINT), (IEN | PTD | EN | M0)) /*d2d_spint*/\ + MUX_VAL(CP(D2D_FRINT), (IEN | PTD | EN | M0)) /*d2d_frint*/\ + MUX_VAL(CP(D2D_DMAREQ0), (IEN | PTD | DIS | M0)) /*d2d_dmareq0*/\ + MUX_VAL(CP(D2D_DMAREQ1), (IEN | PTD | DIS | M0)) /*d2d_dmareq1*/\ + MUX_VAL(CP(D2D_DMAREQ2), (IEN | PTD | DIS | M0)) /*d2d_dmareq2*/\ + MUX_VAL(CP(D2D_DMAREQ3), (IEN | PTD | DIS | M0)) /*d2d_dmareq3*/\ + MUX_VAL(CP(D2D_N3GTRST), (IEN | PTD | DIS | M0)) /*d2d_n3gtrst*/\ + MUX_VAL(CP(D2D_N3GTDI), (IEN | PTD | DIS | M0)) /*d2d_n3gtdi*/\ + MUX_VAL(CP(D2D_N3GTDO), (IEN | PTD | DIS | M0)) /*d2d_n3gtdo*/\ + MUX_VAL(CP(D2D_N3GTMS), (IEN | PTD | DIS | M0)) /*d2d_n3gtms*/\ + MUX_VAL(CP(D2D_N3GTCK), (IEN | PTD | DIS | M0)) /*d2d_n3gtck*/\ + MUX_VAL(CP(D2D_N3GRTCK), (IEN | PTD | DIS | M0)) /*d2d_n3grtck*/\ + MUX_VAL(CP(D2D_MSTDBY), (IEN | PTU | EN | M0)) /*d2d_mstdby*/\ + MUX_VAL(CP(D2D_SWAKEUP), (IEN | PTD | EN | M0)) /*d2d_swakeup*/\ + MUX_VAL(CP(D2D_IDLEREQ), (IEN | PTD | DIS | M0)) /*d2d_idlereq*/\ + MUX_VAL(CP(D2D_IDLEACK), (IEN | PTU | EN | M0)) /*d2d_idleack*/\ + MUX_VAL(CP(D2D_MWRITE), (IEN | PTD | DIS | M0)) /*d2d_mwrite*/\ + MUX_VAL(CP(D2D_SWRITE), (IEN | PTD | DIS | M0)) /*d2d_swrite*/\ + MUX_VAL(CP(D2D_MREAD), (IEN | PTD | DIS | M0)) /*d2d_mread*/\ + MUX_VAL(CP(D2D_SREAD), (IEN | PTD | DIS | M0)) /*d2d_sread*/\ + MUX_VAL(CP(D2D_MBUSFLAG), (IEN | PTD | DIS | M0)) /*d2d_mbusflag*/\ + MUX_VAL(CP(D2D_SBUSFLAG), (IEN | PTD | DIS | M0)) /*d2d_sbusflag*/\ + MUX_VAL(CP(SDRC_CKE0), (IDIS | PTU | EN | M0)) /*sdrc_cke0*/\ + MUX_VAL(CP(SDRC_CKE1), (IDIS | PTU | EN | M0)) /*sdrc_cke1*/ + +#endif diff --git a/board/matrix_vision/mvblx/sys_eeprom.c b/board/matrix_vision/mvblx/sys_eeprom.c new file mode 100644 index 0000000..945a36d --- /dev/null +++ b/board/matrix_vision/mvblx/sys_eeprom.c @@ -0,0 +1,395 @@ +/* + * Copyright 2006, 2008-2009, 2011 Freescale Semiconductor + * York Sun (yorksun@freescale.com) + * Haiying Wang (haiying.wang@freescale.com) + * Timur Tabi (timur@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <command.h> +#include <i2c.h> + +/* #define DEBUG */ + +/* + * static eeprom: EEPROM layout + */ +static struct __attribute__ ((__packed__)) eeprom { + u8 id[16]; /* 0x01 - 0x0F Type e.g. 100wG-5111 */ + u8 sn[10]; /* 0x10 - 0x19 Serial Number */ + u8 date[6]; /* 0x1A - 0x1F Build Date */ + u8 mac[6]; /* 0x20 - 0x25 MAC address */ + u8 reserved[10];/* 0x26 - 0x2f reserved */ + u32 crc; /* x+1 CRC32 checksum */ +} e; + +/* Set to 1 if we've read EEPROM into memory */ +static int has_been_read; + +/** + * show_eeprom - display the contents of the EEPROM + */ +static void show_eeprom(void) +{ + unsigned int crc; + char safe_string[16]; + +#ifdef DEBUG + int i; +#endif + u8 *p; + + /* ID */ + strncpy(safe_string, (char *)e.id, sizeof(e.id)); + safe_string[sizeof(e.id)-1] = 0; + printf("ID: mvBlueLYNX-X%s\n", safe_string); + + /* Serial number */ + strncpy(safe_string, (char *)e.sn, sizeof(e.sn)); + safe_string[sizeof(e.sn)-1] = 0; + printf("SN: %s\n", safe_string); + + /* Build date, BCD date values, as YYMMDDhhmmss */ + printf("Build date: 20%02x/%02x/%02x %02x:%02x:%02x %s\n", + e.date[0], e.date[1], e.date[2], + e.date[3] & 0x7F, e.date[4], e.date[5], + e.date[3] & 0x80 ? "PM" : ""); + + /* Show MAC address */ + p = e.mac; + printf("Eth: %02x:%02x:%02x:%02x:%02x:%02x\n", + p[0], p[1], p[2], p[3], p[4], p[5]); + + crc = crc32(0, (void *)&e, sizeof(e) - 4); + + if (crc == be32_to_cpu(e.crc)) + printf("CRC: %08x\n", be32_to_cpu(e.crc)); + else + printf("CRC: %08x (should be %08x)\n", be32_to_cpu(e.crc), crc); + +#ifdef DEBUG + printf("EEPROM dump: (0x%x bytes)\n", sizeof(e)); + for (i = 0; i < sizeof(e); i++) { + if ((i % 16) == 0) + printf("%02X: ", i); + printf("%02X ", ((u8 *)&e)[i]); + if (((i % 16) == 15) || (i == sizeof(e) - 1)) + printf("\n"); + } +#endif +} + +/** + * read_eeprom - read the EEPROM into memory + */ +static int read_eeprom(void) +{ + int ret; +#ifdef CONFIG_SYS_EEPROM_BUS_NUM + unsigned int bus; +#endif + + if (has_been_read) + return 0; + +#ifdef CONFIG_SYS_EEPROM_BUS_NUM + bus = i2c_get_bus_num(); + i2c_set_bus_num(CONFIG_SYS_EEPROM_BUS_NUM); +#endif + + ret = eeprom_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, + (uchar *)&e, sizeof(e)); + +#ifdef CONFIG_SYS_EEPROM_BUS_NUM + i2c_set_bus_num(bus); +#endif + +#ifdef DEBUG + show_eeprom(); +#endif + + has_been_read = (ret == 0) ? 1 : 0; + + return ret; +} + +/** + * update_crc - update the CRC + * + * This function should be called after each update to the EEPROM structure, + * to make sure the CRC is always correct. + */ +static void update_crc(void) +{ + u32 crc; + + crc = crc32(0, (void *)&e, sizeof(e) - 4); + e.crc = cpu_to_be32(crc); +} + +/** + * prog_eeprom - write the EEPROM from memory + */ +static int prog_eeprom(void) +{ + int ret = 0; +#ifdef CONFIG_SYS_EEPROM_BUS_NUM + unsigned int bus; +#endif + + update_crc(); + +#ifdef CONFIG_SYS_EEPROM_BUS_NUM + bus = i2c_get_bus_num(); + i2c_set_bus_num(CONFIG_SYS_EEPROM_BUS_NUM); +#endif + + ret = eeprom_write(CONFIG_SYS_I2C_EEPROM_ADDR, 0, + (uchar *)&e, sizeof(e)); + + if (!ret) { + /* Verify the write by reading back the EEPROM and comparing */ + struct eeprom e2; +#ifdef DEBUG + printf("%s verifying...\n", __func__); +#endif + ret = eeprom_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, + (uchar *)&e2, sizeof(e2)); + + if (!ret && memcmp(&e, &e2, sizeof(e))) + ret = -1; + } + +#ifdef CONFIG_SYS_EEPROM_BUS_NUM + i2c_set_bus_num(bus); +#endif + + if (ret) { + printf("Programming failed.\n"); + has_been_read = 0; + return -1; + } + + printf("Programming passed.\n"); + return 0; +} + +/** + * h2i - converts hex character into a number + * + * This function takes a hexadecimal character (e.g. '7' or 'C') and returns + * the integer equivalent. + */ +static inline u8 h2i(char p) +{ + if ((p >= '0') && (p <= '9')) + return p - '0'; + + if ((p >= 'A') && (p <= 'F')) + return (p - 'A') + 10; + + if ((p >= 'a') && (p <= 'f')) + return (p - 'a') + 10; + + return 0; +} + +/** + * set_date - stores the build date into the EEPROM + * + * This function takes a pointer to a string in the format "YYMMDDhhmmss" + * (2-digit year, 2-digit month, etc), converts it to a 6-byte BCD string, + * and stores it in the build date field of the EEPROM local copy. + */ +static void set_date(const char *string) +{ + unsigned int i; + + if (strlen(string) != 12) { + printf("Usage: mac date YYMMDDhhmmss\n"); + return; + } + + for (i = 0; i < 6; i++) + e.date[i] = h2i(string[2 * i]) << 4 | h2i(string[2 * i + 1]); + + update_crc(); +} + +/** + * set_mac_address - stores a MAC address into the EEPROM + * + * This function takes a pointer to MAC address string + * (i.e."XX:XX:XX:XX:XX:XX", where "XX" is a two-digit hex number) and + * stores it in the MAC address field in the EEPROM local copy. + */ +static void set_mac_address(const char *string) +{ + char *p = (char *) string; + unsigned int i; + + for (i = 0; *p && (i < 6); i++) { + e.mac[i] = simple_strtoul(p, &p, 16); + if (*p == ':') + p++; + } + + update_crc(); +} + +int do_mac(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + char cmd; + + if (argc == 1) { + show_eeprom(); + return 0; + } + + cmd = argv[1][0]; + + if (cmd == 'r') { +#ifdef DEBUG + printf("%s read\n", __func__); +#endif + read_eeprom(); + return 0; + } + + if (argc == 2) { + switch (cmd) { + case 's': /* save */ +#ifdef DEBUG + printf("%s save\n", __func__); +#endif + prog_eeprom(); + break; + default: + return cmd_usage(cmdtp); + } + + return 0; + } + + /* We know we have at least one parameter */ + + switch (cmd) { + case 'n': /* serial number */ +#ifdef DEBUG + printf("%s serial number\n", __func__); +#endif + memset(e.sn, 0, sizeof(e.sn)); + strncpy((char *)e.sn, argv[2], sizeof(e.sn) - 1); + update_crc(); + break; + case 'd': /* date BCD format YYMMDDhhmmss */ + set_date(argv[2]); + break; + case 'e': /* errata */ + printf("mac errata not implemented\n"); + break; + case 'i': /* id */ + memset(e.id, 0, sizeof(e.id)); + strncpy((char *)e.id, argv[2], sizeof(e.id) - 1); + update_crc(); + break; + case 'p': /* ports */ + printf("mac ports not implemented (always 1 port)\n"); + break; + case '0' ... '9': + /* we only have "mac 0" but any digit can be used here */ + set_mac_address(argv[2]); + break; + case 'h': /* help */ + default: + return cmd_usage(cmdtp); + } + + return 0; +} + +int mac_read_from_eeprom(void) +{ + u32 crc, crc_offset = offsetof(struct eeprom, crc); + u32 *crcp; /* Pointer to the CRC in the data read from the EEPROM */ + + if (read_eeprom()) { + printf("EEPROM Read failed.\n"); + return -1; + } + + crc = crc32(0, (void *)&e, crc_offset); + crcp = (void *)&e + crc_offset; + if (crc != be32_to_cpu(*crcp)) { + printf("EEPROM CRC mismatch (%08x != %08x)\n", crc, + be32_to_cpu(e.crc)); + return -1; + } + + if (memcmp(&e.mac, "\0\0\0\0\0\0", 6) && + memcmp(&e.mac, "\xFF\xFF\xFF\xFF\xFF\xFF", 6)) { + char ethaddr[9]; + + sprintf(ethaddr, "%02X:%02X:%02X:%02X:%02X:%02X", + e.mac[0], + e.mac[1], + e.mac[2], + e.mac[3], + e.mac[4], + e.mac[5]); + /* Only initialize environment variables that are blank + * (i.e. have not yet been set) + */ + if (!getenv("ethaddr")) + setenv("ethaddr", ethaddr); + } + + if (memcmp(&e.sn, "\0\0\0\0\0\0\0\0\0\0", 10) && + memcmp(&e.sn, "\xFF\xFF\xFF\xFF\xFF\xFF\xFF\xFF\xFF\xFF", 10)) { + char serial_num[12]; + + strncpy(serial_num, (char *)e.sn, sizeof(e.sn) - 1); + /* Only initialize environment variables that are blank + * (i.e. have not yet been set) + */ + if (!getenv("serial#")) + setenv("serial#", serial_num); + } + + /* TODO should I calculate CRC here? */ + return 0; +} + +#ifdef CONFIG_SERIAL_TAG +void get_board_serial(struct tag_serialnr *serialnr) +{ + char *serial = getenv("serial#"); + + if (serial && (strlen(serial) > 3)) { + /* use the numerical part of the serial number LXnnnnnn */ + serialnr->high = 0; + serialnr->low = simple_strtoul(serial + 2, NULL, 10); + } else { + serialnr->high = 0; + serialnr->low = 0; + } +} +#endif diff --git a/board/samsung/origen/Makefile b/board/samsung/origen/Makefile index bb6eaf6..3a885a5 100644 --- a/board/samsung/origen/Makefile +++ b/board/samsung/origen/Makefile @@ -41,7 +41,7 @@ OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS)) ALL +=$(obj).depend $(LIB) ifdef CONFIG_SPL_BUILD -ALL += tools/mk$(BOARD)spl.exe +ALL += $(OBJTREE)/tools/mk$(BOARD)spl endif all: $(ALL) @@ -50,8 +50,8 @@ $(LIB): $(OBJS) $(call cmd_link_o_target, $(OBJS)) ifdef CONFIG_SPL_BUILD -tools/mk$(BOARD)spl.exe: tools/mkv310_image.c - $(HOSTCC) tools/mkv310_image.c -o tools/mk$(BOARD)spl.exe +$(OBJTREE)/tools/mk$(BOARD)spl: tools/mkv310_image.c + $(HOSTCC) tools/mkv310_image.c -o $(OBJTREE)/tools/mk$(BOARD)spl endif ######################################################################### diff --git a/board/samsung/smdkv310/Makefile b/board/samsung/smdkv310/Makefile index d168abd..56e0c16 100644 --- a/board/samsung/smdkv310/Makefile +++ b/board/samsung/smdkv310/Makefile @@ -26,16 +26,33 @@ LIB = $(obj)lib$(BOARD).o SOBJS := mem_setup.o SOBJS += lowlevel_init.o +ifndef CONFIG_SPL_BUILD COBJS += smdkv310.o +endif + +ifdef CONFIG_SPL_BUILD +COBJS += mmc_boot.o +endif SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS)) -all: $(obj).depend $(LIB) +ALL := $(obj).depend $(LIB) + +ifdef CONFIG_SPL_BUILD +ALL += $(OBJTREE)/tools/mk$(BOARD)spl +endif + +all: $(ALL) $(LIB): $(OBJS) $(call cmd_link_o_target, $(OBJS)) +ifdef CONFIG_SPL_BUILD +$(OBJTREE)/tools/mk$(BOARD)spl: tools/mkv310_image.c + $(HOSTCC) tools/mkv310_image.c -o $(OBJTREE)/tools/mk$(BOARD)spl +endif + ######################################################################### # defines $(obj).depend target diff --git a/mmc_spl/board/samsung/smdkv310/mmc_boot.c b/board/samsung/smdkv310/mmc_boot.c index 2f3e463..d3fc18d 100644 --- a/mmc_spl/board/samsung/smdkv310/mmc_boot.c +++ b/board/samsung/smdkv310/mmc_boot.c @@ -23,15 +23,16 @@ #include<common.h> #include<config.h> -typedef u32(*copy_sd_mmc_to_mem) \ - (u32 start_block, u32 block_count, u32 *dest_addr); - - +/* +* Copy U-boot from mmc to RAM: +* COPY_BL2_FNPTR_ADDR: Address in iRAM, which Contains +* API (Data transfer from mmc to ram) +*/ void copy_uboot_to_ram(void) { - copy_sd_mmc_to_mem copy_bl2 = (copy_sd_mmc_to_mem)(0x00002488); - copy_bl2(BL2_START_OFFSET,\ - BL2_SIZE_BLOC_COUNT, (u32 *)CONFIG_SYS_TEXT_BASE); + u32 (*copy_bl2)(u32, u32, u32) = (void *)COPY_BL2_FNPTR_ADDR; + + copy_bl2(BL2_START_OFFSET, BL2_SIZE_BLOC_COUNT, CONFIG_SYS_TEXT_BASE); } void board_init_f(unsigned long bootflag) diff --git a/board/samsung/smdkv310/smdkv310.c b/board/samsung/smdkv310/smdkv310.c index e0b89dd..d9caca7 100644 --- a/board/samsung/smdkv310/smdkv310.c +++ b/board/samsung/smdkv310/smdkv310.c @@ -57,7 +57,6 @@ int board_init(void) smc9115_pre_init(); - gd->bd->bi_arch_number = MACH_TYPE_SMDKV310; gd->bd->bi_boot_params = (PHYS_SDRAM_1 + 0x100UL); return 0; } @@ -75,13 +74,17 @@ int dram_init(void) void dram_init_banksize(void) { gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; + gd->bd->bi_dram[0].size = get_ram_size((long *)PHYS_SDRAM_1, \ + PHYS_SDRAM_1_SIZE); gd->bd->bi_dram[1].start = PHYS_SDRAM_2; - gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE; + gd->bd->bi_dram[1].size = get_ram_size((long *)PHYS_SDRAM_2, \ + PHYS_SDRAM_2_SIZE); gd->bd->bi_dram[2].start = PHYS_SDRAM_3; - gd->bd->bi_dram[2].size = PHYS_SDRAM_3_SIZE; + gd->bd->bi_dram[2].size = get_ram_size((long *)PHYS_SDRAM_3, \ + PHYS_SDRAM_3_SIZE); gd->bd->bi_dram[3].start = PHYS_SDRAM_4; - gd->bd->bi_dram[3].size = PHYS_SDRAM_4_SIZE; + gd->bd->bi_dram[3].size = get_ram_size((long *)PHYS_SDRAM_4, \ + PHYS_SDRAM_4_SIZE); } int board_eth_init(bd_t *bis) diff --git a/mmc_spl/board/samsung/smdkv310/tools/mkv310_image.c b/board/samsung/smdkv310/tools/mkv310_image.c index 1a51913..1a51913 100644 --- a/mmc_spl/board/samsung/smdkv310/tools/mkv310_image.c +++ b/board/samsung/smdkv310/tools/mkv310_image.c diff --git a/board/samsung/universal_c210/universal.c b/board/samsung/universal_c210/universal.c index 1b27e8b..d767eaa 100644 --- a/board/samsung/universal_c210/universal.c +++ b/board/samsung/universal_c210/universal.c @@ -27,6 +27,7 @@ #include <asm/arch/adc.h> #include <asm/arch/gpio.h> #include <asm/arch/mmc.h> +#include <pmic.h> DECLARE_GLOBAL_DATA_PTR; @@ -57,6 +58,10 @@ int board_init(void) check_hw_revision(); printf("HW Revision:\t0x%x\n", board_rev); +#if defined(CONFIG_PMIC) + pmic_init(); +#endif + return 0; } diff --git a/board/syteco/jadecpu/jadecpu.c b/board/syteco/jadecpu/jadecpu.c index 63a0d33..72288fe 100644 --- a/board/syteco/jadecpu/jadecpu.c +++ b/board/syteco/jadecpu/jadecpu.c @@ -40,7 +40,6 @@ int board_init(void) writel(0x00000010, &ccnt->cmux_md); gd->flags = 0; - gd->bd->bi_arch_number = MACH_TYPE_JADECPU; gd->bd->bi_boot_params = PHYS_SDRAM + PHYS_SDRAM_SIZE - 0x10000; icache_enable(); diff --git a/board/ti/evm/evm.c b/board/ti/evm/evm.c index b17c0fb..8c43463 100644 --- a/board/ti/evm/evm.c +++ b/board/ti/evm/evm.c @@ -217,7 +217,22 @@ int board_eth_init(bd_t *bis) { int rc = 0; #ifdef CONFIG_SMC911X +#define STR_ENV_ETHADDR "ethaddr" + + struct eth_device *dev; + uchar eth_addr[6]; + rc = smc911x_initialize(0, CONFIG_SMC911X_BASE); + + if (!eth_getenv_enetaddr(STR_ENV_ETHADDR, eth_addr)) { + dev = eth_get_dev_by_index(0); + if (dev) { + eth_setenv_enetaddr(STR_ENV_ETHADDR, dev->enetaddr); + } else { + printf("omap3evm: Couldn't get eth device\n"); + rc = -1; + } + } #endif return rc; } diff --git a/board/ttcontrol/vision2/vision2.c b/board/ttcontrol/vision2/vision2.c index d3815b2..f556d30 100644 --- a/board/ttcontrol/vision2/vision2.c +++ b/board/ttcontrol/vision2/vision2.c @@ -31,7 +31,6 @@ #include <asm/arch/iomux.h> #include <asm/gpio.h> #include <asm/arch/sys_proto.h> -#include <asm/errno.h> #include <i2c.h> #include <mmc.h> #include <pmic.h> @@ -44,8 +43,6 @@ DECLARE_GLOBAL_DATA_PTR; -static u32 system_rev; - static struct fb_videomode nec_nl6448bc26_09c = { "NEC_NL6448BC26-09C", 60, /* Refresh */ @@ -151,13 +148,6 @@ static void init_drive_strength(void) PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST); } -u32 get_board_rev(void) -{ - system_rev = get_cpu_rev(); - - return system_rev; -} - int dram_init(void) { gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1, @@ -42,6 +42,8 @@ imx31_litekit arm arm1136 - logicpd imx31_phycore arm arm1136 - - mx31 imx31_phycore_eet arm arm1136 imx31_phycore - mx31 imx31_phycore:IMX31_PHYCORE_EET mx31pdk arm arm1136 - freescale mx31 mx31pdk:NAND_U_BOOT +tt01 arm arm1136 - hale mx31 +flea3 arm arm1136 - CarMediaLab mx35 mx35pdk arm arm1136 - freescale mx35 omap2420h4 arm arm1136 - ti omap24xx tnetv107x_evm arm arm1176 tnetv107xevm ti tnetv107x @@ -119,6 +121,7 @@ pm9263 arm arm926ejs pm9263 ronetix pm9g45 arm arm926ejs pm9g45 ronetix at91 pm9g45:AT91SAM9G45 da830evm arm arm926ejs da8xxevm davinci davinci da850evm arm arm926ejs da8xxevm davinci davinci +cam_enc_4xx arm arm926ejs cam_enc_4xx ait davinci cam_enc_4xx hawkboard arm arm926ejs da8xxevm davinci davinci hawkboard_nand arm arm926ejs da8xxevm davinci davinci hawkboard:NAND_U_BOOT hawkboard_uart arm arm926ejs da8xxevm davinci davinci hawkboard:UART_U_BOOT @@ -132,7 +135,7 @@ davinci_schmoogie arm arm926ejs schmoogie davinci davinci_sffsdr arm arm926ejs sffsdr davinci davinci davinci_sonata arm arm926ejs sonata davinci davinci km_kirkwood arm arm926ejs km_arm keymile kirkwood km_kirkwood:KM_DISABLE_PCI -km_kirkwood_pci arm arm926ejs km_arm keymile kirkwood km_kirkwood +km_kirkwood_pci arm arm926ejs km_arm keymile kirkwood km_kirkwood:KM_RECONFIG_XLX mgcoge3un arm arm926ejs km_arm keymile kirkwood portl2 arm arm926ejs km_arm keymile kirkwood inetspace_v2 arm arm926ejs netspace_v2 LaCie kirkwood netspace_v2:INETSPACE_V2 @@ -181,8 +184,11 @@ am3517_evm arm armv7 am3517evm logicpd dig297 arm armv7 dig297 comelit omap3 omap3_zoom1 arm armv7 zoom1 logicpd omap3 omap3_zoom2 arm armv7 zoom2 logicpd omap3 +omap3_mvblx arm armv7 mvblx matrix_vision omap3 omap3_beagle arm armv7 beagle ti omap3 omap3_evm arm armv7 evm ti omap3 +omap3_evm_quick_mmc arm armv7 evm ti omap3 +omap3_evm_quick_nand arm armv7 evm ti omap3 omap3_sdp3430 arm armv7 sdp3430 ti omap3 devkit8000 arm armv7 devkit8000 timll omap3 omap4_panda arm armv7 panda ti omap4 diff --git a/doc/README.SPL b/doc/README.SPL index b4500fc..89d24a7 100644 --- a/doc/README.SPL +++ b/doc/README.SPL @@ -63,3 +63,5 @@ CONFIG_SPL_LIBGENERIC_SUPPORT (lib/libgeneric.o) CONFIG_SPL_POWER_SUPPORT (drivers/power/libpower.o) CONFIG_SPL_NAND_SUPPORT (drivers/mtd/nand/libnand.o) CONFIG_SPL_DMA_SUPPORT (drivers/dma/libdma.o) +CONFIG_SPL_POST_MEM_SUPPORT (post/drivers/memory.o) +CONFIG_SPL_NAND_LOAD (drivers/mtd/nand/nand_spl_load.o) diff --git a/doc/README.davinci.nand_spl b/doc/README.davinci.nand_spl new file mode 100644 index 0000000..f46721a --- /dev/null +++ b/doc/README.davinci.nand_spl @@ -0,0 +1,141 @@ +With this approach, we don't need the UBL any more on DaVinci boards. +A "make boardname" will compile a u-boot.ubl, with UBL Header, which is +needed for the RBL to find the "UBL", which actually is a UBL-compatible +header, nand spl code and u-boot code. + + +As the RBL uses another read function as the "standard" u-boot, +we need a command, which switches between this two read/write +functions, so we can write the UBL header and the spl +code in a format, which the RBL can read. This is realize +(at the moment in board specific code) in the u-boot command +nandrbl + +nandrbl without arguments returns actual mode (rbl or uboot). +with nandrbl mode (mode = "rbl" or "uboot") you can switch +between the two NAND read/write modes. + + +To set up mkimage you need a config file for mkimage, example: +board/ait/cam_enc_4xx/ublimage.cfg + +For information about the configuration please see: +doc/README.ublimage + +Example for the cam_enc_4xx board: +On the cam_enc_4xx board we have a NAND flash with blocksize = 0x20000 and +pagesize = 0x800, so the u-boot.ubl image (which you get with: +"make cam_enc_4xx") looks like this: + +00000000 00 ed ac a1 20 00 00 00 06 00 00 00 05 00 00 00 |.... ...........| +00000010 00 00 00 00 20 00 00 00 ff ff ff ff ff ff ff ff |.... ...........| +00000020 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff |................| +* +00000800 14 00 00 ea 14 f0 9f e5 10 f0 9f e5 0c f0 9f e5 |................| +00000810 08 f0 9f e5 04 f0 9f e5 00 f0 9f e5 04 f0 1f e5 |................| +00000820 00 01 00 00 78 56 34 12 78 56 34 12 78 56 34 12 |....xV4.xV4.xV4.| +[...] +* +00001fe0 00 00 00 00 00 00 00 00 ff ff ff ff ff ff ff ff |................| +00001ff0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff |................| +* +00003800 14 00 00 ea 14 f0 9f e5 14 f0 9f e5 14 f0 9f e5 |................| +00003810 14 f0 9f e5 14 f0 9f e5 14 f0 9f e5 14 f0 9f e5 |................| +00003820 80 01 08 81 e0 01 08 81 40 02 08 81 a0 02 08 81 |........@.......| + +In the first "page" of the image, we have the UBL Header, needed for +the RBL to find the spl code. + +The spl code starts in the second "page" of the image, with a size +defined by: + +#define CONFIG_SYS_NROF_PAGES_NAND_SPL 6 + +After the spl code, there comes the "real" u-boot code +@ (6 + 1) * pagesize = 0x3800 + +------------------------------------------------------------------------ +Setting up spl code: + +/* + * RBL searches from Block n (n = 1..24) + * so we can define, how many UBL Headers + * we write before the real spl code + */ +#define CONFIG_SYS_NROF_UBL_HEADER 5 +#define CONFIG_SYS_NROF_PAGES_NAND_SPL 6 + +#define CONFIG_SYS_NAND_U_BOOT_OFFS ((CONFIG_SYS_NROF_UBL_HEADER * \ + CONFIG_SYS_NAND_BLOCK_SIZE) + \ + (CONFIG_SYS_NROF_PAGES_NAND_SPL) * \ + CONFIG_SYS_NAND_PAGE_SIZE) +------------------------------------------------------------------------ + +Burning into NAND: + +step 1: +The RBL searches from Block n ( n = 1..24) on page 0 for valid UBL +Headers, so you have to burn the UBL header page from the u-boot.ubl +image to the blocks, you want to have the UBL header. +!! Don;t forget to switch to rbl nand read/write functions with + "nandrbl rbl" + +step 2: +You need to setup in the ublimage.cfg, where the RBL can find the spl +code, and how big it is. + +!! RBL always starts reading from page 0 !! + +For the AIT board, we have: +PAGES 6 +START_BLOCK 5 + +So we need to copy the spl code to block 5 page 0 +!! Don;t forget to switch to rbl nand read/write functions with + "nandrbl rbl" + +step 3: +You need to copy the u-boot image to the block/page +where the spl code reads it (CONFIG_SYS_NAND_U_BOOT_OFFS) +!! Don;t forget to switch to rbl nand read/write functions with + "nandrbl uboot", which is default. + +On the cam_enc_4xx board it is: +#define CONFIG_SYS_NAND_U_BOOT_OFFS (0xc0000) + +-> this results in following NAND usage on the cam_enc_4xx board: + +addr + +20000 possible UBL Header +40000 possible UBL Header +60000 possible UBL Header +80000 possilbe UBL Header +a0000 spl code +c0000 u-boot code + +The above steps are executeed through the following environment vars: +(using 80000 as address for the UBL header) + +pagesz=800 +uboot=/tftpboot/cam_enc_4xx/u-boot.ubl +load=tftp 80000000 ${uboot} +writeheader nandrbl rbl;nand erase 80000 ${pagesz};nand write 80000000 80000 ${pagesz};nandrbl uboot +writenand_spl nandrbl rbl;nand erase a0000 3000;nand write 80000800 a0000 3000;nandrbl uboot +writeuboot nandrbl uboot;nand erase c0000 5d000;nand write 80003800 c0000 5d000 +update=run load writeheader writenand_spl writeuboot + +If you do a "run load update" u-boot, spl + ubl header +are magically updated ;-) + +Note: +- There seem to be a bug in the RBL code (at least on my HW), + In the UBL block, I can set the page to values != 0, so it + is possible to burn step 1 and step 2 in one step into the + flash, but the RBL ignores the page settings, so I have to + burn the UBL Header to a page 0 and the spl code to + a page 0 ... :-( +- If we make the nand read/write functions in the RBL equal to + the functions in u-boot (as I have no RBL code, it is only + possible in u-boot), we could burn the complete image in + one step ... that would be nice ... diff --git a/doc/README.omap3 b/doc/README.omap3 index 2a3f46b..0a37de0 100644 --- a/doc/README.omap3 +++ b/doc/README.omap3 @@ -68,6 +68,11 @@ make make cm_t35_config make +* BlueLYNX-X: + +make omap3_mvblx_config +make + Custom commands =============== diff --git a/drivers/i2c/mxc_i2c.c b/drivers/i2c/mxc_i2c.c index 2869d7c..c88ac7c 100644 --- a/drivers/i2c/mxc_i2c.c +++ b/drivers/i2c/mxc_i2c.c @@ -37,6 +37,7 @@ #include <asm/arch/clock.h> #include <asm/arch/imx-regs.h> +#include <i2c.h> struct mxc_i2c_regs { uint32_t iadr; @@ -73,6 +74,10 @@ struct mxc_i2c_regs { #define I2C_BASE I2C2_BASE_ADDR #elif defined(CONFIG_SYS_I2C_MX35_PORT1) #define I2C_BASE I2C_BASE_ADDR +#elif defined(CONFIG_SYS_I2C_MX35_PORT2) +#define I2C_BASE I2C2_BASE_ADDR +#elif defined(CONFIG_SYS_I2C_MX35_PORT3) +#define I2C_BASE I2C3_BASE_ADDR #else #error "define CONFIG_SYS_I2C_MX<Processor>_PORTx to use the mx I2C driver" #endif @@ -95,16 +100,14 @@ static u16 i2c_clk_div[50][2] = { { 3072, 0x1E }, { 3840, 0x1F } }; -static u8 clk_div; - /* * Calculate and set proper clock divider */ -static void i2c_imx_set_clk(unsigned int rate) +static uint8_t i2c_imx_get_clk(unsigned int rate) { - struct mxc_i2c_regs *i2c_regs = (struct mxc_i2c_regs *)I2C_BASE; unsigned int i2c_clk_rate; unsigned int div; + u8 clk_div; #if defined(CONFIG_MX31) struct clock_control_regs *sc_regs = @@ -127,7 +130,7 @@ static void i2c_imx_set_clk(unsigned int rate) ; /* Store divider value */ - writeb(i2c_clk_div[clk_div][1], &i2c_regs->ifdr); + return clk_div; } /* @@ -146,7 +149,13 @@ void i2c_reset(void) */ void i2c_init(int speed, int unused) { - i2c_imx_set_clk(speed); + struct mxc_i2c_regs *i2c_regs = (struct mxc_i2c_regs *)I2C_BASE; + u8 clk_idx = i2c_imx_get_clk(speed); + u8 idx = i2c_clk_div[clk_idx][1]; + + /* Store divider value */ + writeb(idx, &i2c_regs->ifdr); + i2c_reset(); } @@ -164,6 +173,13 @@ int i2c_set_bus_speed(unsigned int speed) */ unsigned int i2c_get_bus_speed(void) { + struct mxc_i2c_regs *i2c_regs = (struct mxc_i2c_regs *)I2C_BASE; + u8 clk_idx = readb(&i2c_regs->ifdr); + u8 clk_div; + + for (clk_div = 0; i2c_clk_div[clk_div][1] != clk_idx; clk_div++) + ; + return mxc_get_clock(MXC_IPG_PERCLK) / i2c_clk_div[clk_div][0]; } @@ -232,8 +248,12 @@ int i2c_imx_start(void) struct mxc_i2c_regs *i2c_regs = (struct mxc_i2c_regs *)I2C_BASE; unsigned int temp = 0; int result; + int speed = i2c_get_bus_speed(); + u8 clk_idx = i2c_imx_get_clk(speed); + u8 idx = i2c_clk_div[clk_idx][1]; - writeb(i2c_clk_div[clk_div][1], &i2c_regs->ifdr); + /* Store divider value */ + writeb(idx, &i2c_regs->ifdr); /* Enable I2C controller */ writeb(0, &i2c_regs->i2sr); @@ -306,11 +326,10 @@ int i2c_imx_set_chip_addr(uchar chip, int read) int i2c_imx_set_reg_addr(uint addr, int alen) { struct mxc_i2c_regs *i2c_regs = (struct mxc_i2c_regs *)I2C_BASE; - int ret; - int i; + int ret = 0; - for (i = 0; i < (8 * alen); i += 8) { - writeb((addr >> i) & 0xff, &i2c_regs->i2dr); + while (alen--) { + writeb((addr >> (alen * 8)) & 0xff, &i2c_regs->i2dr); ret = i2c_imx_trx_complete(); if (ret) diff --git a/drivers/misc/pmic_fsl.c b/drivers/misc/pmic_fsl.c index b6e809a..0ff75ed 100644 --- a/drivers/misc/pmic_fsl.c +++ b/drivers/misc/pmic_fsl.c @@ -29,10 +29,7 @@ #if defined(CONFIG_PMIC_SPI) static u32 pmic_spi_prepare_tx(u32 reg, u32 *val, u32 write) { - if ((val == NULL) && (write)) - return *val & ~(1 << 31); - else - return (write << 31) | (reg << 25) | (*val & 0x00FFFFFF); + return (write << 31) | (reg << 25) | (*val & 0x00FFFFFF); } #endif diff --git a/drivers/misc/pmic_spi.c b/drivers/misc/pmic_spi.c index ff35377..5a0dd22 100644 --- a/drivers/misc/pmic_spi.c +++ b/drivers/misc/pmic_spi.c @@ -76,8 +76,7 @@ static u32 pmic_reg(struct pmic *p, u32 reg, u32 *val, u32 write) } if (write) { - pmic_tx = p->hw.spi.prepare_tx(0, NULL, write); - pmic_tx &= ~(1 << 31); + pmic_tx = p->hw.spi.prepare_tx(reg, val, 0); tmp = cpu_to_be32(pmic_tx); if (spi_xfer(slave, pmic_spi_bitlen, &tmp, &pmic_rx, pmic_spi_flags)) { diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile index 1eeba5c..28bd350 100644 --- a/drivers/mtd/nand/Makefile +++ b/drivers/mtd/nand/Makefile @@ -30,6 +30,9 @@ ifdef CONFIG_SPL_BUILD ifdef CONFIG_SPL_NAND_SIMPLE COBJS-y += nand_spl_simple.o endif +ifdef CONFIG_SPL_NAND_LOAD +COBJS-y += nand_spl_load.o +endif else COBJS-y += nand.o COBJS-y += nand_bbt.o diff --git a/drivers/mtd/nand/nand_spl_load.c b/drivers/mtd/nand/nand_spl_load.c new file mode 100644 index 0000000..ae8d5ac --- /dev/null +++ b/drivers/mtd/nand/nand_spl_load.c @@ -0,0 +1,56 @@ +/* + * Copyright (C) 2011 + * Heiko Schocher, DENX Software Engineering, hs@denx.de. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <nand.h> + +/* + * The main entry for NAND booting. It's necessary that SDRAM is already + * configured and available since this code loads the main U-Boot image + * from NAND into SDRAM and starts it from there. + */ +void nand_boot(void) +{ + int ret; + __attribute__((noreturn)) void (*uboot)(void); + + /* + * Load U-Boot image from NAND into RAM + */ + ret = nand_spl_load_image(CONFIG_SYS_NAND_U_BOOT_OFFS, + CONFIG_SYS_NAND_U_BOOT_SIZE, + (void *)CONFIG_SYS_NAND_U_BOOT_DST); + +#ifdef CONFIG_NAND_ENV_DST + ret = nand_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE, + (void *)CONFIG_NAND_ENV_DST); + +#ifdef CONFIG_ENV_OFFSET_REDUND + ret = nand_spl_load_image(CONFIG_ENV_OFFSET_REDUND, CONFIG_ENV_SIZE, + (void *)CONFIG_NAND_ENV_DST + CONFIG_ENV_SIZE); +#endif +#endif + + /* + * Jump to U-Boot image + */ + uboot = (void *)CONFIG_SYS_NAND_U_BOOT_START; + (*uboot)(); +} diff --git a/drivers/mtd/nand/nand_spl_simple.c b/drivers/mtd/nand/nand_spl_simple.c index 71491d4..e5003e6 100644 --- a/drivers/mtd/nand/nand_spl_simple.c +++ b/drivers/mtd/nand/nand_spl_simple.c @@ -140,6 +140,47 @@ static int nand_is_bad_block(int block) return 0; } +#if defined(CONFIG_SYS_NAND_HW_ECC_OOBFIRST) +static int nand_read_page(int block, int page, uchar *dst) +{ + struct nand_chip *this = mtd.priv; + u_char *ecc_calc; + u_char *ecc_code; + u_char *oob_data; + int i; + int eccsize = CONFIG_SYS_NAND_ECCSIZE; + int eccbytes = CONFIG_SYS_NAND_ECCBYTES; + int eccsteps = CONFIG_SYS_NAND_ECCSTEPS; + uint8_t *p = dst; + int stat; + + /* + * No malloc available for now, just use some temporary locations + * in SDRAM + */ + ecc_calc = (u_char *)(CONFIG_SYS_SDRAM_BASE + 0x10000); + ecc_code = ecc_calc + 0x100; + oob_data = ecc_calc + 0x200; + + nand_command(block, page, 0, NAND_CMD_READOOB); + this->read_buf(&mtd, oob_data, CONFIG_SYS_NAND_OOBSIZE); + nand_command(block, page, 0, NAND_CMD_READ0); + + /* Pick the ECC bytes out of the oob data */ + for (i = 0; i < CONFIG_SYS_NAND_ECCTOTAL; i++) + ecc_code[i] = oob_data[nand_ecc_pos[i]]; + + + for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) { + this->ecc.hwctl(&mtd, NAND_ECC_READ); + this->read_buf(&mtd, p, eccsize); + this->ecc.calculate(&mtd, p, &ecc_calc[i]); + stat = this->ecc.correct(&mtd, p, &ecc_code[i], &ecc_calc[i]); + } + + return 0; +} +#else static int nand_read_page(int block, int page, void *dst) { struct nand_chip *this = mtd.priv; @@ -186,6 +227,7 @@ static int nand_read_page(int block, int page, void *dst) return 0; } +#endif int nand_spl_load_image(uint32_t offs, unsigned int size, void *dst) { @@ -230,7 +272,6 @@ void nand_init(void) mtd.priv = &nand_chip; nand_chip.IO_ADDR_R = nand_chip.IO_ADDR_W = (void __iomem *)CONFIG_SYS_NAND_BASE; - nand_chip.options = 0; board_nand_init(&nand_chip); if (nand_chip.select_chip) diff --git a/drivers/net/davinci_emac.c b/drivers/net/davinci_emac.c index 7dacb23..fa31159 100644 --- a/drivers/net/davinci_emac.c +++ b/drivers/net/davinci_emac.c @@ -53,6 +53,11 @@ unsigned int emac_dbg = 0; #define emac_gigabit_enable(phy_addr) /* no gigabit to enable */ #endif +#if !defined(CONFIG_SYS_EMAC_TI_CLKDIV) +#define CONFIG_SYS_EMAC_TI_CLKDIV ((EMAC_MDIO_BUS_FREQ / \ + EMAC_MDIO_CLOCK_FREQ) - 1) +#endif + static void davinci_eth_mdio_enable(void); static int gen_init_phy(int phy_addr); @@ -131,7 +136,7 @@ static void davinci_eth_mdio_enable(void) { u_int32_t clkdiv; - clkdiv = (EMAC_MDIO_BUS_FREQ / EMAC_MDIO_CLOCK_FREQ) - 1; + clkdiv = CONFIG_SYS_EMAC_TI_CLKDIV; writel((clkdiv & 0xff) | MDIO_CONTROL_ENABLE | @@ -473,7 +478,7 @@ static int davinci_eth_open(struct eth_device *dev, bd_t *bis) #endif /* Init MDIO & get link state */ - clkdiv = (EMAC_MDIO_BUS_FREQ / EMAC_MDIO_CLOCK_FREQ) - 1; + clkdiv = CONFIG_SYS_EMAC_TI_CLKDIV; writel((clkdiv & 0xff) | MDIO_CONTROL_ENABLE | MDIO_CONTROL_FAULT, &adap_mdio->CONTROL); @@ -809,7 +814,7 @@ int davinci_emac_initialize(void) phy[i].auto_negotiate = gen_auto_negotiate; } - debug("Ethernet PHY: %s\n", phy.name); + debug("Ethernet PHY: %s\n", phy[i].name); miiphy_register(phy[i].name, davinci_mii_phy_read, davinci_mii_phy_write); diff --git a/drivers/net/mvgbe.c b/drivers/net/mvgbe.c index c7f7446..fd13428 100644 --- a/drivers/net/mvgbe.c +++ b/drivers/net/mvgbe.c @@ -37,6 +37,7 @@ #include <asm/types.h> #include <asm/system.h> #include <asm/byteorder.h> +#include <asm/arch/cpu.h> #if defined(CONFIG_KIRKWOOD) #include <asm/arch/kirkwood.h> diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile index df440c6..a16f590 100644 --- a/drivers/rtc/Makefile +++ b/drivers/rtc/Makefile @@ -50,7 +50,7 @@ COBJS-$(CONFIG_RTC_M41T62) += m41t62.o COBJS-$(CONFIG_RTC_M41T94) += m41t94.o COBJS-$(CONFIG_RTC_M48T35A) += m48t35ax.o COBJS-$(CONFIG_RTC_MAX6900) += max6900.o -COBJS-$(CONFIG_RTC_MC13783) += mc13783-rtc.o +COBJS-$(CONFIG_RTC_MC13XXX) += mc13xxx-rtc.o COBJS-$(CONFIG_RTC_MC146818) += mc146818.o COBJS-$(CONFIG_MCFRTC) += mcfrtc.o COBJS-$(CONFIG_RTC_MK48T59) += mk48t59.o diff --git a/drivers/rtc/mc13783-rtc.c b/drivers/rtc/mc13xxx-rtc.c index 70ea8a1..70ea8a1 100644 --- a/drivers/rtc/mc13783-rtc.c +++ b/drivers/rtc/mc13xxx-rtc.c diff --git a/drivers/rtc/mvrtc.c b/drivers/rtc/mvrtc.c index ccc573a..edc1f4f 100644 --- a/drivers/rtc/mvrtc.c +++ b/drivers/rtc/mvrtc.c @@ -28,6 +28,7 @@ #include <common.h> #include <command.h> #include <rtc.h> +#include <asm/io.h> #include "mvrtc.h" /* This RTC does not support century, so we assume 20 */ diff --git a/drivers/usb/host/ehci-mxc.c b/drivers/usb/host/ehci-mxc.c index a0cfbb7..f403d49 100644 --- a/drivers/usb/host/ehci-mxc.c +++ b/drivers/usb/host/ehci-mxc.c @@ -120,7 +120,6 @@ int ehci_hcd_init(void) udelay(80); - /* Take USB2 */ ehci = (struct usb_ehci *)(IMX_USB_BASE + (0x200 * CONFIG_MXC_USB_PORT)); hccr = (struct ehci_hccr *)((uint32_t)&ehci->caplength); diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c index f56f2df..359c635 100644 --- a/drivers/usb/musb/davinci.c +++ b/drivers/usb/musb/davinci.c @@ -26,6 +26,10 @@ #include "davinci.h" #include <asm/arch/hardware.h> +#if !defined(CONFIG_DV_USBPHY_CTL) +#define CONFIG_DV_USBPHY_CTL (USBPHY_SESNDEN | USBPHY_VBDTCTEN) +#endif + /* MUSB platform configuration */ struct musb_config musb_cfg = { .regs = (struct musb_regs *)MENTOR_USB0_BASE, @@ -50,7 +54,7 @@ static u8 phy_on(void) writel(USBPHY_PHY24MHZ | USBPHY_SESNDEN | USBPHY_VBDTCTEN, USBPHY_CTL_PADDR); #else - writel(USBPHY_SESNDEN | USBPHY_VBDTCTEN, USBPHY_CTL_PADDR); + writel(CONFIG_DV_USBPHY_CTL, USBPHY_CTL_PADDR); #endif timeout = musb_cfg.timeout; @@ -78,6 +82,17 @@ static void phy_off(void) writel(USBPHY_OSCPDWN | USBPHY_PHYPDWN, USBPHY_CTL_PADDR); } +void __enable_vbus(void) +{ + /* + * nothing to do, vbus is handled through the cpu. + * Define this function in board code, if it is + * different on your board. + */ +} +void enable_vbus(void) + __attribute__((weak, alias("__enable_vbus"))); + /* * This function performs Davinci platform specific initialization for usb0. */ @@ -86,9 +101,8 @@ int musb_platform_init(void) u32 revision; /* enable USB VBUS */ -#ifndef DAVINCI_DM365EVM enable_vbus(); -#endif + /* start the on-chip USB phy and its pll */ if (!phy_on()) return -1; diff --git a/drivers/video/Makefile b/drivers/video/Makefile index ecc1896..6252f6a 100644 --- a/drivers/video/Makefile +++ b/drivers/video/Makefile @@ -33,6 +33,7 @@ COBJS-$(CONFIG_S6E63D6) += s6e63d6.o COBJS-$(CONFIG_SED156X) += sed156x.o COBJS-$(CONFIG_VIDEO_AMBA) += amba.o COBJS-$(CONFIG_VIDEO_CT69000) += ct69000.o videomodes.o +COBJS-$(CONFIG_VIDEO_DA8XX) += da8xx-fb.o videomodes.o COBJS-$(CONFIG_VIDEO_MB862xx) += mb862xx.o videomodes.o COBJS-$(CONFIG_VIDEO_MB86R0xGDC) += mb86r0xgdc.o videomodes.o COBJS-$(CONFIG_VIDEO_MX3) += mx3fb.o videomodes.o diff --git a/drivers/video/da8xx-fb.c b/drivers/video/da8xx-fb.c new file mode 100644 index 0000000..bca9fb5 --- /dev/null +++ b/drivers/video/da8xx-fb.c @@ -0,0 +1,846 @@ +/* + * Porting to u-boot: + * + * (C) Copyright 2011 + * Stefano Babic, DENX Software Engineering, sbabic@denx.de. + * + * Copyright (C) 2008-2009 MontaVista Software Inc. + * Copyright (C) 2008-2009 Texas Instruments Inc + * + * Based on the LCD driver for TI Avalanche processors written by + * Ajay Singh and Shalom Hai. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option)any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <common.h> +#include <malloc.h> +#include <video_fb.h> +#include <linux/list.h> +#include <linux/fb.h> + +#include <asm/errno.h> +#include <asm/io.h> +#include <asm/arch/hardware.h> + +#include "videomodes.h" +#include <asm/arch/da8xx-fb.h> + +#define DRIVER_NAME "da8xx_lcdc" + +/* LCD Status Register */ +#define LCD_END_OF_FRAME1 (1 << 9) +#define LCD_END_OF_FRAME0 (1 << 8) +#define LCD_PL_LOAD_DONE (1 << 6) +#define LCD_FIFO_UNDERFLOW (1 << 5) +#define LCD_SYNC_LOST (1 << 2) + +/* LCD DMA Control Register */ +#define LCD_DMA_BURST_SIZE(x) ((x) << 4) +#define LCD_DMA_BURST_1 0x0 +#define LCD_DMA_BURST_2 0x1 +#define LCD_DMA_BURST_4 0x2 +#define LCD_DMA_BURST_8 0x3 +#define LCD_DMA_BURST_16 0x4 +#define LCD_END_OF_FRAME_INT_ENA (1 << 2) +#define LCD_DUAL_FRAME_BUFFER_ENABLE (1 << 0) + +/* LCD Control Register */ +#define LCD_CLK_DIVISOR(x) ((x) << 8) +#define LCD_RASTER_MODE 0x01 + +/* LCD Raster Control Register */ +#define LCD_PALETTE_LOAD_MODE(x) ((x) << 20) +#define PALETTE_AND_DATA 0x00 +#define PALETTE_ONLY 0x01 +#define DATA_ONLY 0x02 + +#define LCD_MONO_8BIT_MODE (1 << 9) +#define LCD_RASTER_ORDER (1 << 8) +#define LCD_TFT_MODE (1 << 7) +#define LCD_UNDERFLOW_INT_ENA (1 << 6) +#define LCD_PL_ENABLE (1 << 4) +#define LCD_MONOCHROME_MODE (1 << 1) +#define LCD_RASTER_ENABLE (1 << 0) +#define LCD_TFT_ALT_ENABLE (1 << 23) +#define LCD_STN_565_ENABLE (1 << 24) + +/* LCD Raster Timing 2 Register */ +#define LCD_AC_BIAS_TRANSITIONS_PER_INT(x) ((x) << 16) +#define LCD_AC_BIAS_FREQUENCY(x) ((x) << 8) +#define LCD_SYNC_CTRL (1 << 25) +#define LCD_SYNC_EDGE (1 << 24) +#define LCD_INVERT_PIXEL_CLOCK (1 << 22) +#define LCD_INVERT_LINE_CLOCK (1 << 21) +#define LCD_INVERT_FRAME_CLOCK (1 << 20) + +/* LCD Block */ +struct da8xx_lcd_regs { + u32 revid; + u32 ctrl; + u32 stat; + u32 lidd_ctrl; + u32 lidd_cs0_conf; + u32 lidd_cs0_addr; + u32 lidd_cs0_data; + u32 lidd_cs1_conf; + u32 lidd_cs1_addr; + u32 lidd_cs1_data; + u32 raster_ctrl; + u32 raster_timing_0; + u32 raster_timing_1; + u32 raster_timing_2; + u32 raster_subpanel; + u32 reserved; + u32 dma_ctrl; + u32 dma_frm_buf_base_addr_0; + u32 dma_frm_buf_ceiling_addr_0; + u32 dma_frm_buf_base_addr_1; + u32 dma_frm_buf_ceiling_addr_1; +}; + +#define LCD_NUM_BUFFERS 1 + +#define WSI_TIMEOUT 50 +#define PALETTE_SIZE 256 +#define LEFT_MARGIN 64 +#define RIGHT_MARGIN 64 +#define UPPER_MARGIN 32 +#define LOWER_MARGIN 32 + +#define calc_fbsize() (panel.plnSizeX * panel.plnSizeY * panel.gdfBytesPP) +#define mdelay(n) ({unsigned long msec = (n); while (msec--) udelay(1000); }) + +static struct da8xx_lcd_regs *da8xx_fb_reg_base; + +DECLARE_GLOBAL_DATA_PTR; + +/* graphics setup */ +static GraphicDevice gpanel; +static const struct da8xx_panel *lcd_panel; +static struct fb_info *da8xx_fb_info; +static int bits_x_pixel; + +static inline unsigned int lcdc_read(u32 *addr) +{ + return (unsigned int)readl(addr); +} + +static inline void lcdc_write(unsigned int val, u32 *addr) +{ + writel(val, addr); +} + +struct da8xx_fb_par { + u32 p_palette_base; + unsigned char *v_palette_base; + dma_addr_t vram_phys; + unsigned long vram_size; + void *vram_virt; + unsigned int dma_start; + unsigned int dma_end; + struct clk *lcdc_clk; + int irq; + unsigned short pseudo_palette[16]; + unsigned int palette_sz; + unsigned int pxl_clk; + int blank; + int vsync_flag; + int vsync_timeout; +}; + + +/* Variable Screen Information */ +static struct fb_var_screeninfo da8xx_fb_var = { + .xoffset = 0, + .yoffset = 0, + .transp = {0, 0, 0}, + .nonstd = 0, + .activate = 0, + .height = -1, + .width = -1, + .pixclock = 46666, /* 46us - AUO display */ + .accel_flags = 0, + .left_margin = LEFT_MARGIN, + .right_margin = RIGHT_MARGIN, + .upper_margin = UPPER_MARGIN, + .lower_margin = LOWER_MARGIN, + .sync = 0, + .vmode = FB_VMODE_NONINTERLACED +}; + +static struct fb_fix_screeninfo da8xx_fb_fix = { + .id = "DA8xx FB Drv", + .type = FB_TYPE_PACKED_PIXELS, + .type_aux = 0, + .visual = FB_VISUAL_PSEUDOCOLOR, + .xpanstep = 0, + .ypanstep = 1, + .ywrapstep = 0, + .accel = FB_ACCEL_NONE +}; + +static const struct display_panel disp_panel = { + QVGA, + 16, + 16, + COLOR_ACTIVE, +}; + +static const struct lcd_ctrl_config lcd_cfg = { + &disp_panel, + .ac_bias = 255, + .ac_bias_intrpt = 0, + .dma_burst_sz = 16, + .bpp = 16, + .fdd = 255, + .tft_alt_mode = 0, + .stn_565_mode = 0, + .mono_8bit_mode = 0, + .invert_line_clock = 1, + .invert_frm_clock = 1, + .sync_edge = 0, + .sync_ctrl = 1, + .raster_order = 0, +}; + +/* Enable the Raster Engine of the LCD Controller */ +static inline void lcd_enable_raster(void) +{ + u32 reg; + + reg = lcdc_read(&da8xx_fb_reg_base->raster_ctrl); + if (!(reg & LCD_RASTER_ENABLE)) + lcdc_write(reg | LCD_RASTER_ENABLE, + &da8xx_fb_reg_base->raster_ctrl); +} + +/* Disable the Raster Engine of the LCD Controller */ +static inline void lcd_disable_raster(void) +{ + u32 reg; + + reg = lcdc_read(&da8xx_fb_reg_base->raster_ctrl); + if (reg & LCD_RASTER_ENABLE) + lcdc_write(reg & ~LCD_RASTER_ENABLE, + &da8xx_fb_reg_base->raster_ctrl); +} + +static void lcd_blit(int load_mode, struct da8xx_fb_par *par) +{ + u32 start; + u32 end; + u32 reg_ras; + u32 reg_dma; + + /* init reg to clear PLM (loading mode) fields */ + reg_ras = lcdc_read(&da8xx_fb_reg_base->raster_ctrl); + reg_ras &= ~(3 << 20); + + reg_dma = lcdc_read(&da8xx_fb_reg_base->dma_ctrl); + + if (load_mode == LOAD_DATA) { + start = par->dma_start; + end = par->dma_end; + + reg_ras |= LCD_PALETTE_LOAD_MODE(DATA_ONLY); + reg_dma |= LCD_END_OF_FRAME_INT_ENA; + +#if (LCD_NUM_BUFFERS == 2) + reg_dma |= LCD_DUAL_FRAME_BUFFER_ENABLE; + lcdc_write(start, &da8xx_fb_reg_base->dma_frm_buf_base_addr_0); + lcdc_write(end, &da8xx_fb_reg_base->dma_frm_buf_ceiling_addr_0); + lcdc_write(start, &da8xx_fb_reg_base->dma_frm_buf_base_addr_1); + lcdc_write(end, &da8xx_fb_reg_base->dma_frm_buf_ceiling_addr_1); +#else + reg_dma &= ~LCD_DUAL_FRAME_BUFFER_ENABLE; + lcdc_write(start, &da8xx_fb_reg_base->dma_frm_buf_base_addr_0); + lcdc_write(end, &da8xx_fb_reg_base->dma_frm_buf_ceiling_addr_0); + lcdc_write(0, &da8xx_fb_reg_base->dma_frm_buf_base_addr_1); + lcdc_write(0, &da8xx_fb_reg_base->dma_frm_buf_ceiling_addr_1); +#endif + + } else if (load_mode == LOAD_PALETTE) { + start = par->p_palette_base; + end = start + par->palette_sz - 1; + + reg_ras |= LCD_PALETTE_LOAD_MODE(PALETTE_ONLY); + reg_ras |= LCD_PL_ENABLE; + + lcdc_write(start, &da8xx_fb_reg_base->dma_frm_buf_base_addr_0); + lcdc_write(end, &da8xx_fb_reg_base->dma_frm_buf_ceiling_addr_0); + } + + lcdc_write(reg_dma, &da8xx_fb_reg_base->dma_ctrl); + lcdc_write(reg_ras, &da8xx_fb_reg_base->raster_ctrl); + + /* + * The Raster enable bit must be set after all other control fields are + * set. + */ + lcd_enable_raster(); +} + +/* Configure the Burst Size of DMA */ +static int lcd_cfg_dma(int burst_size) +{ + u32 reg; + + reg = lcdc_read(&da8xx_fb_reg_base->dma_ctrl) & 0x00000001; + switch (burst_size) { + case 1: + reg |= LCD_DMA_BURST_SIZE(LCD_DMA_BURST_1); + break; + case 2: + reg |= LCD_DMA_BURST_SIZE(LCD_DMA_BURST_2); + break; + case 4: + reg |= LCD_DMA_BURST_SIZE(LCD_DMA_BURST_4); + break; + case 8: + reg |= LCD_DMA_BURST_SIZE(LCD_DMA_BURST_8); + break; + case 16: + reg |= LCD_DMA_BURST_SIZE(LCD_DMA_BURST_16); + break; + default: + return -EINVAL; + } + lcdc_write(reg, &da8xx_fb_reg_base->dma_ctrl); + + return 0; +} + +static void lcd_cfg_ac_bias(int period, int transitions_per_int) +{ + u32 reg; + + /* Set the AC Bias Period and Number of Transisitons per Interrupt */ + reg = lcdc_read(&da8xx_fb_reg_base->raster_timing_2) & 0xFFF00000; + reg |= LCD_AC_BIAS_FREQUENCY(period) | + LCD_AC_BIAS_TRANSITIONS_PER_INT(transitions_per_int); + lcdc_write(reg, &da8xx_fb_reg_base->raster_timing_2); +} + +static void lcd_cfg_horizontal_sync(int back_porch, int pulse_width, + int front_porch) +{ + u32 reg; + + reg = lcdc_read(&da8xx_fb_reg_base->raster_timing_0) & 0xf; + reg |= ((back_porch & 0xff) << 24) + | ((front_porch & 0xff) << 16) + | ((pulse_width & 0x3f) << 10); + lcdc_write(reg, &da8xx_fb_reg_base->raster_timing_0); +} + +static void lcd_cfg_vertical_sync(int back_porch, int pulse_width, + int front_porch) +{ + u32 reg; + + reg = lcdc_read(&da8xx_fb_reg_base->raster_timing_1) & 0x3ff; + reg |= ((back_porch & 0xff) << 24) + | ((front_porch & 0xff) << 16) + | ((pulse_width & 0x3f) << 10); + lcdc_write(reg, &da8xx_fb_reg_base->raster_timing_1); +} + +static int lcd_cfg_display(const struct lcd_ctrl_config *cfg) +{ + u32 reg; + + reg = lcdc_read(&da8xx_fb_reg_base->raster_ctrl) & ~(LCD_TFT_MODE | + LCD_MONO_8BIT_MODE | + LCD_MONOCHROME_MODE); + + switch (cfg->p_disp_panel->panel_shade) { + case MONOCHROME: + reg |= LCD_MONOCHROME_MODE; + if (cfg->mono_8bit_mode) + reg |= LCD_MONO_8BIT_MODE; + break; + case COLOR_ACTIVE: + reg |= LCD_TFT_MODE; + if (cfg->tft_alt_mode) + reg |= LCD_TFT_ALT_ENABLE; + break; + + case COLOR_PASSIVE: + if (cfg->stn_565_mode) + reg |= LCD_STN_565_ENABLE; + break; + + default: + return -EINVAL; + } + + /* enable additional interrupts here */ + reg |= LCD_UNDERFLOW_INT_ENA; + + lcdc_write(reg, &da8xx_fb_reg_base->raster_ctrl); + + reg = lcdc_read(&da8xx_fb_reg_base->raster_timing_2); + + if (cfg->sync_ctrl) + reg |= LCD_SYNC_CTRL; + else + reg &= ~LCD_SYNC_CTRL; + + if (cfg->sync_edge) + reg |= LCD_SYNC_EDGE; + else + reg &= ~LCD_SYNC_EDGE; + + if (cfg->invert_line_clock) + reg |= LCD_INVERT_LINE_CLOCK; + else + reg &= ~LCD_INVERT_LINE_CLOCK; + + if (cfg->invert_frm_clock) + reg |= LCD_INVERT_FRAME_CLOCK; + else + reg &= ~LCD_INVERT_FRAME_CLOCK; + + lcdc_write(reg, &da8xx_fb_reg_base->raster_timing_2); + + return 0; +} + +static int lcd_cfg_frame_buffer(struct da8xx_fb_par *par, u32 width, u32 height, + u32 bpp, u32 raster_order) +{ + u32 reg; + + /* Set the Panel Width */ + /* Pixels per line = (PPL + 1)*16 */ + /*0x3F in bits 4..9 gives max horisontal resolution = 1024 pixels*/ + width &= 0x3f0; + reg = lcdc_read(&da8xx_fb_reg_base->raster_timing_0); + reg &= 0xfffffc00; + reg |= ((width >> 4) - 1) << 4; + lcdc_write(reg, &da8xx_fb_reg_base->raster_timing_0); + + /* Set the Panel Height */ + reg = lcdc_read(&da8xx_fb_reg_base->raster_timing_1); + reg = ((height - 1) & 0x3ff) | (reg & 0xfffffc00); + lcdc_write(reg, &da8xx_fb_reg_base->raster_timing_1); + + /* Set the Raster Order of the Frame Buffer */ + reg = lcdc_read(&da8xx_fb_reg_base->raster_ctrl) & ~(1 << 8); + if (raster_order) + reg |= LCD_RASTER_ORDER; + lcdc_write(reg, &da8xx_fb_reg_base->raster_ctrl); + + switch (bpp) { + case 1: + case 2: + case 4: + case 16: + par->palette_sz = 16 * 2; + break; + + case 8: + par->palette_sz = 256 * 2; + break; + + default: + return -EINVAL; + } + + return 0; +} + +static int fb_setcolreg(unsigned regno, unsigned red, unsigned green, + unsigned blue, unsigned transp, + struct fb_info *info) +{ + struct da8xx_fb_par *par = info->par; + unsigned short *palette = (unsigned short *) par->v_palette_base; + u_short pal; + int update_hw = 0; + + if (regno > 255) + return 1; + + if (info->fix.visual == FB_VISUAL_DIRECTCOLOR) + return 1; + + if (info->var.bits_per_pixel == 8) { + red >>= 4; + green >>= 8; + blue >>= 12; + + pal = (red & 0x0f00); + pal |= (green & 0x00f0); + pal |= (blue & 0x000f); + + if (palette[regno] != pal) { + update_hw = 1; + palette[regno] = pal; + } + } else if ((info->var.bits_per_pixel == 16) && regno < 16) { + red >>= (16 - info->var.red.length); + red <<= info->var.red.offset; + + green >>= (16 - info->var.green.length); + green <<= info->var.green.offset; + + blue >>= (16 - info->var.blue.length); + blue <<= info->var.blue.offset; + + par->pseudo_palette[regno] = red | green | blue; + + if (palette[0] != 0x4000) { + update_hw = 1; + palette[0] = 0x4000; + } + } + + /* Update the palette in the h/w as needed. */ + if (update_hw) + lcd_blit(LOAD_PALETTE, par); + + return 0; +} + +static void lcd_reset(struct da8xx_fb_par *par) +{ + /* Disable the Raster if previously Enabled */ + lcd_disable_raster(); + + /* DMA has to be disabled */ + lcdc_write(0, &da8xx_fb_reg_base->dma_ctrl); + lcdc_write(0, &da8xx_fb_reg_base->raster_ctrl); +} + +static void lcd_calc_clk_divider(struct da8xx_fb_par *par) +{ + unsigned int lcd_clk, div; + + /* Get clock from sysclk2 */ + lcd_clk = clk_get(2); + + div = lcd_clk / par->pxl_clk; + debug("LCD Clock: 0x%x Divider: 0x%x PixClk: 0x%x\n", + lcd_clk, div, par->pxl_clk); + + /* Configure the LCD clock divisor. */ + lcdc_write(LCD_CLK_DIVISOR(div) | + (LCD_RASTER_MODE & 0x1), &da8xx_fb_reg_base->ctrl); +} + +static int lcd_init(struct da8xx_fb_par *par, const struct lcd_ctrl_config *cfg, + const struct da8xx_panel *panel) +{ + u32 bpp; + int ret = 0; + + lcd_reset(par); + + /* Calculate the divider */ + lcd_calc_clk_divider(par); + + if (panel->invert_pxl_clk) + lcdc_write((lcdc_read(&da8xx_fb_reg_base->raster_timing_2) | + LCD_INVERT_PIXEL_CLOCK), + &da8xx_fb_reg_base->raster_timing_2); + else + lcdc_write((lcdc_read(&da8xx_fb_reg_base->raster_timing_2) & + ~LCD_INVERT_PIXEL_CLOCK), + &da8xx_fb_reg_base->raster_timing_2); + + /* Configure the DMA burst size. */ + ret = lcd_cfg_dma(cfg->dma_burst_sz); + if (ret < 0) + return ret; + + /* Configure the AC bias properties. */ + lcd_cfg_ac_bias(cfg->ac_bias, cfg->ac_bias_intrpt); + + /* Configure the vertical and horizontal sync properties. */ + lcd_cfg_vertical_sync(panel->vbp, panel->vsw, panel->vfp); + lcd_cfg_horizontal_sync(panel->hbp, panel->hsw, panel->hfp); + + /* Configure for disply */ + ret = lcd_cfg_display(cfg); + if (ret < 0) + return ret; + + if (QVGA != cfg->p_disp_panel->panel_type) + return -EINVAL; + + if (cfg->bpp <= cfg->p_disp_panel->max_bpp && + cfg->bpp >= cfg->p_disp_panel->min_bpp) + bpp = cfg->bpp; + else + bpp = cfg->p_disp_panel->max_bpp; + if (bpp == 12) + bpp = 16; + ret = lcd_cfg_frame_buffer(par, (unsigned int)panel->width, + (unsigned int)panel->height, bpp, + cfg->raster_order); + if (ret < 0) + return ret; + + /* Configure FDD */ + lcdc_write((lcdc_read(&da8xx_fb_reg_base->raster_ctrl) & 0xfff00fff) | + (cfg->fdd << 12), &da8xx_fb_reg_base->raster_ctrl); + + return 0; +} + +static void lcdc_dma_start(void) +{ + struct da8xx_fb_par *par = da8xx_fb_info->par; + lcdc_write(par->dma_start, + &da8xx_fb_reg_base->dma_frm_buf_base_addr_0); + lcdc_write(par->dma_end, + &da8xx_fb_reg_base->dma_frm_buf_ceiling_addr_0); + lcdc_write(0, + &da8xx_fb_reg_base->dma_frm_buf_base_addr_1); + lcdc_write(0, + &da8xx_fb_reg_base->dma_frm_buf_ceiling_addr_1); +} + +static u32 lcdc_irq_handler(void) +{ + struct da8xx_fb_par *par = da8xx_fb_info->par; + u32 stat = lcdc_read(&da8xx_fb_reg_base->stat); + u32 reg_ras; + + if ((stat & LCD_SYNC_LOST) && (stat & LCD_FIFO_UNDERFLOW)) { + debug("LCD_SYNC_LOST\n"); + lcd_disable_raster(); + lcdc_write(stat, &da8xx_fb_reg_base->stat); + lcd_enable_raster(); + return LCD_SYNC_LOST; + } else if (stat & LCD_PL_LOAD_DONE) { + debug("LCD_PL_LOAD_DONE\n"); + /* + * Must disable raster before changing state of any control bit. + * And also must be disabled before clearing the PL loading + * interrupt via the following write to the status register. If + * this is done after then one gets multiple PL done interrupts. + */ + lcd_disable_raster(); + + lcdc_write(stat, &da8xx_fb_reg_base->stat); + + /* Disable PL completion inerrupt */ + reg_ras = lcdc_read(&da8xx_fb_reg_base->raster_ctrl); + reg_ras &= ~LCD_PL_ENABLE; + lcdc_write(reg_ras, &da8xx_fb_reg_base->raster_ctrl); + + /* Setup and start data loading mode */ + lcd_blit(LOAD_DATA, par); + return LCD_PL_LOAD_DONE; + } else { + lcdc_write(stat, &da8xx_fb_reg_base->stat); + + if (stat & LCD_END_OF_FRAME0) + debug("LCD_END_OF_FRAME0\n"); + + lcdc_write(par->dma_start, + &da8xx_fb_reg_base->dma_frm_buf_base_addr_0); + lcdc_write(par->dma_end, + &da8xx_fb_reg_base->dma_frm_buf_ceiling_addr_0); + par->vsync_flag = 1; + return LCD_END_OF_FRAME0; + } + return stat; +} + +static u32 wait_for_event(u32 event) +{ + u32 timeout = 50000; + u32 ret; + + do { + ret = lcdc_irq_handler(); + udelay(1000); + } while (!(ret & event)); + + if (timeout <= 0) { + printf("%s: event %d not hit\n", __func__, event); + return -1; + } + + return 0; + +} + +void *video_hw_init(void) +{ + struct da8xx_fb_par *par; + int ret; + u32 size; + char *p; + + if (!lcd_panel) { + printf("Display not initialized\n"); + return NULL; + } + gpanel.winSizeX = lcd_panel->width; + gpanel.winSizeY = lcd_panel->height; + gpanel.plnSizeX = lcd_panel->width; + gpanel.plnSizeY = lcd_panel->height; + + switch (bits_x_pixel) { + case 24: + gpanel.gdfBytesPP = 4; + gpanel.gdfIndex = GDF_32BIT_X888RGB; + break; + case 16: + gpanel.gdfBytesPP = 2; + gpanel.gdfIndex = GDF_16BIT_565RGB; + break; + default: + gpanel.gdfBytesPP = 1; + gpanel.gdfIndex = GDF__8BIT_INDEX; + break; + } + + da8xx_fb_reg_base = (struct da8xx_lcd_regs *)DAVINCI_LCD_CNTL_BASE; + + debug("Resolution: %dx%d %x\n", + gpanel.winSizeX, + gpanel.winSizeY, + lcd_cfg.bpp); + + size = sizeof(struct fb_info) + sizeof(struct da8xx_fb_par); + da8xx_fb_info = malloc(size); + debug("da8xx_fb_info at %x\n", (unsigned int)da8xx_fb_info); + + if (!da8xx_fb_info) { + printf("Memory allocation failed for fb_info\n"); + return NULL; + } + memset(da8xx_fb_info, 0, size); + p = (char *)da8xx_fb_info; + da8xx_fb_info->par = p + sizeof(struct fb_info); + debug("da8xx_par at %x\n", (unsigned int)da8xx_fb_info->par); + + par = da8xx_fb_info->par; + par->pxl_clk = lcd_panel->pxl_clk; + + if (lcd_init(par, &lcd_cfg, lcd_panel) < 0) { + printf("lcd_init failed\n"); + ret = -EFAULT; + goto err_release_fb; + } + + /* allocate frame buffer */ + par->vram_size = lcd_panel->width * lcd_panel->height * lcd_cfg.bpp; + par->vram_size = par->vram_size * LCD_NUM_BUFFERS / 8; + + par->vram_virt = malloc(par->vram_size); + + par->vram_phys = (dma_addr_t) par->vram_virt; + debug("Requesting 0x%x bytes for framebuffer at 0x%x\n", + (unsigned int)par->vram_size, + (unsigned int)par->vram_virt); + if (!par->vram_virt) { + printf("GLCD: malloc for frame buffer failed\n"); + ret = -EINVAL; + goto err_release_fb; + } + + gpanel.frameAdrs = (unsigned int)par->vram_virt; + da8xx_fb_info->screen_base = (char *) par->vram_virt; + da8xx_fb_fix.smem_start = gpanel.frameAdrs; + da8xx_fb_fix.smem_len = par->vram_size; + da8xx_fb_fix.line_length = (lcd_panel->width * lcd_cfg.bpp) / 8; + + par->dma_start = par->vram_phys; + par->dma_end = par->dma_start + lcd_panel->height * + da8xx_fb_fix.line_length - 1; + + /* allocate palette buffer */ + par->v_palette_base = malloc(PALETTE_SIZE); + if (!par->v_palette_base) { + printf("GLCD: malloc for palette buffer failed\n"); + goto err_release_fb_mem; + } + memset(par->v_palette_base, 0, PALETTE_SIZE); + par->p_palette_base = (unsigned int)par->v_palette_base; + + /* Initialize par */ + da8xx_fb_info->var.bits_per_pixel = lcd_cfg.bpp; + + da8xx_fb_var.xres = lcd_panel->width; + da8xx_fb_var.xres_virtual = lcd_panel->width; + + da8xx_fb_var.yres = lcd_panel->height; + da8xx_fb_var.yres_virtual = lcd_panel->height * LCD_NUM_BUFFERS; + + da8xx_fb_var.grayscale = + lcd_cfg.p_disp_panel->panel_shade == MONOCHROME ? 1 : 0; + da8xx_fb_var.bits_per_pixel = lcd_cfg.bpp; + + da8xx_fb_var.hsync_len = lcd_panel->hsw; + da8xx_fb_var.vsync_len = lcd_panel->vsw; + + /* Initialize fbinfo */ + da8xx_fb_info->flags = FBINFO_FLAG_DEFAULT; + da8xx_fb_info->fix = da8xx_fb_fix; + da8xx_fb_info->var = da8xx_fb_var; + da8xx_fb_info->pseudo_palette = par->pseudo_palette; + da8xx_fb_info->fix.visual = (da8xx_fb_info->var.bits_per_pixel <= 8) ? + FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_TRUECOLOR; + + /* Clear interrupt */ + memset((void *)par->vram_virt, 0, par->vram_size); + lcd_disable_raster(); + lcdc_write(0xFFFF, &da8xx_fb_reg_base->stat); + debug("Palette at 0x%x size %d\n", par->p_palette_base, + par->palette_sz); + lcdc_dma_start(); + + /* Load a default palette */ + fb_setcolreg(0, 0, 0, 0, 0xffff, da8xx_fb_info); + + /* Check that the palette is loaded */ + wait_for_event(LCD_PL_LOAD_DONE); + + /* Wait until DMA is working */ + wait_for_event(LCD_END_OF_FRAME0); + + return (void *)&gpanel; + +err_release_fb_mem: + free(par->vram_virt); + +err_release_fb: + free(da8xx_fb_info); + + return NULL; +} + +void video_set_lut(unsigned int index, /* color number */ + unsigned char r, /* red */ + unsigned char g, /* green */ + unsigned char b /* blue */ + ) +{ + + return; +} + +void da8xx_video_init(const struct da8xx_panel *panel, int bits_pixel) +{ + lcd_panel = panel; + bits_x_pixel = bits_pixel; +} diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h index b471c9b..26a3c96 100644 --- a/include/configs/am335x_evm.h +++ b/include/configs/am335x_evm.h @@ -32,6 +32,7 @@ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (8 * 1024)) #define CONFIG_SYS_PROMPT "AM335X# " #define CONFIG_SYS_NO_FLASH +#define MACH_TYPE_TIAM335EVM 3589 /* Until the next sync */ #define CONFIG_MACH_TYPE MACH_TYPE_TIAM335EVM #define CONFIG_CMD_ASKENV diff --git a/include/configs/cam_enc_4xx.h b/include/configs/cam_enc_4xx.h new file mode 100644 index 0000000..a21d448 --- /dev/null +++ b/include/configs/cam_enc_4xx.h @@ -0,0 +1,453 @@ +/* + * Copyright (C) 2009 Texas Instruments Incorporated + * + * Copyright (C) 2011 + * Heiko Schocher, DENX Software Engineering, hs@denx.de. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#define CONFIG_SYS_NO_FLASH /* that is, no *NOR* flash */ +#define CONFIG_SYS_CONSOLE_INFO_QUIET + +/* SoC Configuration */ +#define CONFIG_ARM926EJS /* arm926ejs CPU */ +#define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */ +#define CONFIG_SYS_HZ_CLOCK 24000000 /* timer0 freq */ +#define CONFIG_SYS_HZ 1000 +#define CONFIG_SOC_DM365 + +#define CONFIG_MACH_TYPE MACH_TYPE_DAVINCI_DM365_EVM + +#define CONFIG_HOSTNAME cam_enc_4xx + +#define BOARD_LATE_INIT +#define CONFIG_CAM_ENC_LED_MASK 0x0fc00000 + +/* Memory Info */ +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM_1 0x80000000 +#define PHYS_SDRAM_1_SIZE (256 << 20) /* 256 MiB */ +#define DDR_4BANKS /* 4-bank DDR2 (256MB) */ +#define CONFIG_MAX_RAM_BANK_SIZE (256 << 20) /* 256 MB */ +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 + +/* Serial Driver info: UART0 for console */ +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE -4 +#define CONFIG_SYS_NS16550_COM1 0x01c20000 +#define CONFIG_SYS_NS16550_CLK CONFIG_SYS_HZ_CLOCK +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } +#define CONFIG_CONS_INDEX 1 +#define CONFIG_BAUDRATE 115200 + +/* Network Configuration */ +#define CONFIG_DRIVER_TI_EMAC +#define CONFIG_EMAC_MDIO_PHY_NUM 0 +#define CONFIG_SYS_EMAC_TI_CLKDIV 0xa9 /* 1MHz */ +#define CONFIG_MII +#define CONFIG_BOOTP_DEFAULT +#define CONFIG_BOOTP_DNS +#define CONFIG_BOOTP_DNS2 +#define CONFIG_BOOTP_SEND_HOSTNAME +#define CONFIG_NET_RETRY_COUNT 10 +#define CONFIG_NET_MULTI +#define CONFIG_CMD_MII +#define CONFIG_SYS_DCACHE_OFF +#define CONFIG_RESET_PHY_R + +/* I2C */ +#define CONFIG_HARD_I2C +#define CONFIG_DRIVER_DAVINCI_I2C +#define CONFIG_SYS_I2C_SPEED 400000 +#define CONFIG_SYS_I2C_SLAVE 0x10 /* SMBus host address */ + +/* NAND: socketed, two chipselects, normally 2 GBytes */ +#define CONFIG_NAND_DAVINCI +#define CONFIG_SYS_NAND_CS 2 +#define CONFIG_SYS_NAND_USE_FLASH_BBT +#define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST +#define CONFIG_SYS_NAND_PAGE_2K + +#define CONFIG_SYS_NAND_LARGEPAGE +#define CONFIG_SYS_NAND_BASE_LIST { 0x02000000, } +/* socket has two chipselects, nCE0 gated by address BIT(14) */ +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_MAX_CHIPS 1 + +/* SPI support */ +#define CONFIG_SPI +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_STMICRO +#define CONFIG_DAVINCI_SPI +#define CONFIG_SYS_SPI_BASE DAVINCI_SPI1_BASE +#define CONFIG_SYS_SPI_CLK davinci_clk_get(SPI_PLLDIV) +#define CONFIG_SF_DEFAULT_SPEED 3000000 +#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED +#define CONFIG_CMD_SF + +/* SD/MMC */ +#define CONFIG_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_DAVINCI_MMC +#define CONFIG_MMC_MBLOCK + +/* U-Boot command configuration */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_BDI +#undef CONFIG_CMD_FLASH +#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_SETGETDCR +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_I2C +#define CONFIG_CMD_PING +#define CONFIG_CMD_SAVES + +#ifdef CONFIG_MMC +#define CONFIG_DOS_PARTITION +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_CMD_MMC +#endif + +#ifdef CONFIG_NAND_DAVINCI +#define CONFIG_CMD_MTDPARTS +#define CONFIG_MTD_PARTITIONS +#define CONFIG_MTD_DEVICE +#define CONFIG_CMD_NAND +#define CONFIG_CMD_UBI +#define CONFIG_RBTREE +#endif + +#define CONFIG_CRC32_VERIFY +#define CONFIG_MX_CYCLIC + +/* U-Boot general configuration */ +#undef CONFIG_USE_IRQ /* No IRQ/FIQ in U-Boot */ +#define CONFIG_BOOTFILE "uImage" /* Boot file name */ +#define CONFIG_SYS_PROMPT "cam_enc_4xx> " /* Monitor Command Prompt */ +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ +#define CONFIG_SYS_PBSIZE /* Print buffer size */ \ + (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#define CONFIG_SYS_LONGHELP + +#ifdef CONFIG_NAND_DAVINCI +#define CONFIG_ENV_SIZE (256 << 10) /* 256 KiB */ +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_OFFSET 0x0 +#undef CONFIG_ENV_IS_IN_FLASH +#endif + +#if defined(CONFIG_MMC) && !defined(CONFIG_ENV_IS_IN_NAND) +#define CONFIG_CMD_ENV +#define CONFIG_ENV_SIZE (16 << 10) /* 16 KiB */ +#define CONFIG_ENV_OFFSET (51 << 9) /* Sector 51 */ +#define CONFIG_ENV_IS_IN_MMC +#undef CONFIG_ENV_IS_IN_FLASH +#endif + +#define CONFIG_BOOTDELAY 3 + +#define CONFIG_CMDLINE_EDITING +#define CONFIG_VERSION_VARIABLE +#define CONFIG_TIMESTAMP + +/* U-Boot memory configuration */ +#define CONFIG_STACKSIZE (256 << 10) /* 256 KiB */ +#define CONFIG_SYS_MALLOC_LEN (1 << 20) /* 1 MiB */ +#define CONFIG_SYS_MEMTEST_START 0x80000000 /* physical address */ +#define CONFIG_SYS_MEMTEST_END 0x81000000 /* test 16MB RAM */ + +/* Linux interfacing */ +#define CONFIG_CMDLINE_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_SYS_BARGSIZE 1024 /* bootarg Size */ +#define CONFIG_SYS_LOAD_ADDR 0x80700000 /* kernel address */ + +#define MTDIDS_DEFAULT "nand0=davinci_nand.0" + +#ifdef CONFIG_SYS_NAND_LARGEPAGE +/* Use same layout for 128K/256K blocks; allow some bad blocks */ +#define PART_BOOT "2m(bootloader)ro," +#endif + +#define PART_KERNEL "4m(kernel)," /* kernel + initramfs */ +#define PART_REST "-(filesystem)" + +#define MTDPARTS_DEFAULT \ + "mtdparts=davinci_nand.0:" PART_BOOT PART_KERNEL PART_REST + +#define CONFIG_SYS_NAND_PAGE_SIZE (0x800) +#define CONFIG_SYS_NAND_BLOCK_SIZE (0x20000) + +/* Defines for SPL */ +#define CONFIG_SPL +#define CONFIG_SPL_NAND_SUPPORT +#define CONFIG_SPL_NAND_SIMPLE +#define CONFIG_SPL_NAND_LOAD +#define CONFIG_SYS_NAND_HW_ECC_OOBFIRST +#define CONFIG_SPL_SERIAL_SUPPORT +#define CONFIG_SPL_POST_MEM_SUPPORT +#define CONFIG_SPL_LDSCRIPT "$(BOARDDIR)/u-boot-spl.lds" +#define CONFIG_SPL_STACK (0x00010000 + 0x7f00) + +#define CONFIG_SPL_TEXT_BASE 0x0000020 /*CONFIG_SYS_SRAM_START*/ +#define CONFIG_SPL_MAX_SIZE 12320 + +#ifndef CONFIG_SPL_BUILD +#define CONFIG_SYS_TEXT_BASE 0x81080000 +#endif + +#define CONFIG_SYS_NAND_BASE 0x02000000 +#define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \ + CONFIG_SYS_NAND_PAGE_SIZE) + +#define CONFIG_SYS_NAND_ECCPOS { \ + 24, 25, 26, 27, 28, \ + 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, \ + 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, \ + 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, \ + 59, 60, 61, 62, 63 } +#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0 +#define CONFIG_SYS_NAND_ECCSIZE 0x200 +#define CONFIG_SYS_NAND_ECCBYTES 10 +#define CONFIG_SYS_NAND_OOBSIZE 64 +#define CONFIG_SYS_NAND_5_ADDR_CYCLE +#define CONFIG_SYS_NAND_ECCSTEPS (CONFIG_SYS_NAND_PAGE_SIZE / \ + CONFIG_SYS_NAND_ECCSIZE) +#define CONFIG_SYS_NAND_ECCTOTAL (40) + +/* + * RBL searches from Block n (n = 1..24) + * so we can define, how many UBL Headers + * we can write before the real spl code + */ +#define CONFIG_SYS_NROF_UBL_HEADER 5 +#define CONFIG_SYS_NROF_PAGES_NAND_SPL 6 + +#define CONFIG_SYS_NAND_U_BOOT_DST 0x81080000 /* u-boot TEXT_BASE */ +#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST + +/* + * Post tests for memory testing + */ +#define CONFIG_POST CONFIG_SYS_POST_MEMORY +#define _POST_WORD_ADDR 0x0 + +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DISPLAY_BOARDINFO + +#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SPL_STACK + +#define CONFIG_SYS_NAND_U_BOOT_OFFS 0xc0000 +#define CONFIG_SYS_NAND_U_BOOT_SIZE 0x60000 + +/* + * U-Boot is a 3rd stage loader and if booting with spl, cpu setup is + * done in board_init_f from c code. + */ +#define CONFIG_SKIP_LOWLEVEL_INIT + +/* for UBL header */ +#define CONFIG_SYS_UBL_BLOCK (CONFIG_SYS_NAND_PAGE_SIZE) + +#define CONFIG_SYS_DM36x_PLL1_PLLM 0x55 +#define CONFIG_SYS_DM36x_PLL1_PREDIV 0x8005 +#define CONFIG_SYS_DM36x_PLL2_PLLM 0x09 +#define CONFIG_SYS_DM36x_PLL2_PREDIV 0x8000 +#define CONFIG_SYS_DM36x_PERI_CLK_CTRL 0x243F04FC +#define CONFIG_SYS_DM36x_PLL1_PLLDIV1 0x801b +#define CONFIG_SYS_DM36x_PLL1_PLLDIV2 0x8001 +/* POST DIV 680/2 = 340Mhz -> MJCP and HDVICP bus interface clock */ +#define CONFIG_SYS_DM36x_PLL1_PLLDIV3 0x8001 +/* + * POST DIV 680/4 = 170Mhz -> EDMA/Peripheral CFG0(1/2 MJCP/HDVICP bus + * interface clk) + */ +#define CONFIG_SYS_DM36x_PLL1_PLLDIV4 0x8003 +/* POST DIV 680/2 = 340Mhz -> VPSS */ +#define CONFIG_SYS_DM36x_PLL1_PLLDIV5 0x8001 +/* POST DIV 680/9 = 75.6 Mhz -> VENC */ +#define CONFIG_SYS_DM36x_PLL1_PLLDIV6 0x8008 +/* + * POST DIV 680/1 = 680Mhz -> DDRx2(with internal divider of 2, clock boils + * down to 340 Mhz) + */ +#define CONFIG_SYS_DM36x_PLL1_PLLDIV7 0x8000 +/* POST DIV 680/7= 97Mhz-> MMC0/SD0 */ +#define CONFIG_SYS_DM36x_PLL1_PLLDIV8 0x8006 +/* POST DIV 680/28 = 24.3Mhz-> CLKOUT */ +#define CONFIG_SYS_DM36x_PLL1_PLLDIV9 0x801b + +#define CONFIG_SYS_DM36x_PLL2_PLLDIV1 0x8011 +/* POST DIV 432/1=432 Mhz -> ARM926/(HDVICP block) clk */ +#define CONFIG_SYS_DM36x_PLL2_PLLDIV2 0x8000 +#define CONFIG_SYS_DM36x_PLL2_PLLDIV3 0x8001 +/* POST DIV 432/21= 20.5714 Mhz->VOICE Codec clk */ +#define CONFIG_SYS_DM36x_PLL2_PLLDIV4 0x8014 +/* POST DIV 432/16=27 Mhz -> VENC(For SD modes, requires) */ +#define CONFIG_SYS_DM36x_PLL2_PLLDIV5 0x800f + +/* + * READ LATENCY 7 (CL + 2) + * CONFIG_PWRDNEN = 1 + * CONFIG_EXT_STRBEN = 1 + */ +#define CONFIG_SYS_DM36x_DDR2_DDRPHYCR (0 \ + | DV_DDR_PHY_EXT_STRBEN \ + | DV_DDR_PHY_PWRDNEN \ + | (7 << DV_DDR_PHY_RD_LATENCY_SHIFT)) + +/* + * T_RFC = (trfc/DDR_CLK) - 1 = (195 / 2.941) - 1 + * T_RP = (trp/DDR_CLK) - 1 = (12.5 / 2.941) - 1 + * T_RCD = (trcd/DDR_CLK) - 1 = (12.5 / 2.941) - 1 + * T_WR = (twr/DDR_CLK) - 1 = (15 / 2.941) - 1 + * T_RAS = (tras/DDR_CLK) - 1 = (45 / 2.941) - 1 + * T_RC = (trc/DDR_CLK) - 1 = (57.5 / 2.941) - 1 + * T_RRD = (trrd/DDR_CLK) - 1 = (7.5 / 2.941) - 1 + * T_WTR = (twtr/DDR_CLK) - 1 = (7.5 / 2.941) - 1 + */ +#define CONFIG_SYS_DM36x_DDR2_SDTIMR (0 \ + | (66 << DV_DDR_SDTMR1_RFC_SHIFT) \ + | (4 << DV_DDR_SDTMR1_RP_SHIFT) \ + | (4 << DV_DDR_SDTMR1_RCD_SHIFT) \ + | (5 << DV_DDR_SDTMR1_WR_SHIFT) \ + | (14 << DV_DDR_SDTMR1_RAS_SHIFT) \ + | (19 << DV_DDR_SDTMR1_RC_SHIFT) \ + | (2 << DV_DDR_SDTMR1_RRD_SHIFT) \ + | (2 << DV_DDR_SDTMR1_WTR_SHIFT)) + +/* + * T_RASMAX = (trasmax/refresh_rate) - 1 = (70K / 7812.6) - 1 + * T_XP = tCKE - 1 = 3 - 2 + * T_XSNR= ((trfc + 10)/DDR_CLK) - 1 = (205 / 2.941) - 1 + * T_XSRD = txsrd - 1 = 200 - 1 + * T_RTP = (trtp/DDR_CLK) - 1 = (7.5 / 2.941) - 1 + * T_CKE = tcke - 1 = 3 - 1 + */ +#define CONFIG_SYS_DM36x_DDR2_SDTIMR2 (0 \ + | (8 << DV_DDR_SDTMR2_RASMAX_SHIFT) \ + | (2 << DV_DDR_SDTMR2_XP_SHIFT) \ + | (69 << DV_DDR_SDTMR2_XSNR_SHIFT) \ + | (199 << DV_DDR_SDTMR2_XSRD_SHIFT) \ + | (2 << DV_DDR_SDTMR2_RTP_SHIFT) \ + | (2 << DV_DDR_SDTMR2_CKE_SHIFT)) + +/* PR_OLD_COUNT = 0xfe */ +#define CONFIG_SYS_DM36x_DDR2_PBBPR 0x000000FE +/* refresh rate = 0x768 */ +#define CONFIG_SYS_DM36x_DDR2_SDRCR 0x00000768 + +#define CONFIG_SYS_DM36x_DDR2_SDBCR (0 \ + | (2 << DV_DDR_SDCR_PAGESIZE_SHIFT) \ + | (3 << DV_DDR_SDCR_IBANK_SHIFT) \ + | (5 << DV_DDR_SDCR_CL_SHIFT) \ + | (1 << DV_DDR_SDCR_BUS_WIDTH_SHIFT) \ + | (1 << DV_DDR_SDCR_TIMUNLOCK_SHIFT) \ + | (1 << DV_DDR_SDCR_DDREN_SHIFT) \ + | (0 << DV_DDR_SDCR_DDRDRIVE0_SHIFT) \ + | (1 << DV_DDR_SDCR_DDR2EN_SHIFT) \ + | (1 << DV_DDR_SDCR_DDR_DDQS_SHIFT) \ + | (1 << DV_DDR_SDCR_BOOTUNLOCK_SHIFT)) + +#define CONFIG_SYS_DM36x_AWCCR 0xff +#define CONFIG_SYS_DM36x_AB1CR 0x40400204 +#define CONFIG_SYS_DM36x_AB2CR 0x04ca2650 + +/* All Video Inputs */ +#define CONFIG_SYS_DM36x_PINMUX0 0x00000000 +/* + * All Video Outputs, + * GPIO 86, 87 + 90 0x0000f030 + */ +#define CONFIG_SYS_DM36x_PINMUX1 0x00530002 +#define CONFIG_SYS_DM36x_PINMUX2 0x00001815 +/* + * SPI1, UART1, I2C, SD0, SD1, McBSP0, CLKOUTs + * GPIO 25 0x60000000 + */ +#define CONFIG_SYS_DM36x_PINMUX3 0x9b5affff +/* + * MMC/SD0 instead of MS, SPI0 + * GPIO 34 0x0000c000 + */ +#define CONFIG_SYS_DM36x_PINMUX4 0x00002655 + +/* + * Default environment settings + */ +#define xstr(s) str(s) +#define str(s) #s + +#define DVN4XX_UBOOT_ADDR_R_RAM 0x80000000 +/* (DVN4XX_UBOOT_ADDR_R_RAM + CONFIG_SYS_NAND_PAGE_SIZE) */ +#define DVN4XX_UBOOT_ADDR_R_NAND_SPL 0x80000800 +/* + * (DVN4XX_UBOOT_ADDR_R_NAND_SPL + (CONFIG_SYS_NROF_PAGES_NAND_SPL * \ + * CONFIG_SYS_NAND_PAGE_SIZE)) + */ +#define DVN4XX_UBOOT_ADDR_R_UBOOT 0x80003800 + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "u_boot_addr_r=" xstr(DVN4XX_UBOOT_ADDR_R_RAM) "\0" \ + "u-boot=" xstr(CONFIG_HOSTNAME) "/u-boot.ubl\0" \ + "load=tftp ${u_boot_addr_r} ${uboot}\0" \ + "pagesz=" xstr(CONFIG_SYS_NAND_PAGE_SIZE) "\0" \ + "writeheader=nandrbl rbl;nand erase 80000 ${pagesz};" \ + "nand write ${u_boot_addr_r} 80000 ${pagesz};" \ + "nandrbl uboot\0" \ + "writenand_spl=nandrbl rbl;nand erase a0000 3000;" \ + "nand write " xstr(DVN4XX_UBOOT_ADDR_R_NAND_SPL) \ + " a0000 3000;nandrbl uboot\0" \ + "writeuboot=nandrbl uboot;" \ + "nand erase " xstr(CONFIG_SYS_NAND_U_BOOT_OFFS) " " \ + xstr(CONFIG_SYS_NAND_U_BOOT_SIZE) \ + ";nand write " xstr(DVN4XX_UBOOT_ADDR_R_UBOOT) \ + " " xstr(CONFIG_SYS_NAND_U_BOOT_OFFS) " " \ + xstr(CONFIG_SYS_NAND_U_BOOT_SIZE) "\0" \ + "update=run load writenand_spl writeuboot\0" \ + "bootcmd=run bootcmd\0" \ + "rootpath=/opt/eldk-arm/arm\0" \ + "\0" + +/* USB Configuration */ +#define CONFIG_USB_DAVINCI +#define CONFIG_MUSB_HCD +#define CONFIG_DV_USBPHY_CTL (USBPHY_SESNDEN | USBPHY_VBDTCTEN | \ + USBPHY_PHY24MHZ) + +#define CONFIG_CMD_USB /* include support for usb cmd */ +#define CONFIG_USB_STORAGE /* MSC class support */ +#define CONFIG_CMD_STORAGE /* inclue support for usb-storage cmd */ +#define CONFIG_CMD_FAT /* inclue support for FAT/storage */ +#define CONFIG_DOS_PARTITION /* inclue support for FAT/storage */ + +#undef DAVINCI_DM365EVM +#define PINMUX4_USBDRVBUS_BITCLEAR 0x3000 +#define PINMUX4_USBDRVBUS_BITSET 0x2000 + +#endif /* __CONFIG_H */ diff --git a/include/configs/dig297.h b/include/configs/dig297.h index 3a05c82..9baf415 100644 --- a/include/configs/dig297.h +++ b/include/configs/dig297.h @@ -32,6 +32,14 @@ #ifndef __CONFIG_H #define __CONFIG_H +#include <asm/mach-types.h> +#ifdef MACH_TYPE_OMAP3_CPS +#error "MACH_TYPE_OMAP3_CPS has been defined properly, please remove this." +#else +#define MACH_TYPE_OMAP3_CPS 2751 +#endif +#define CONFIG_MACH_TYPE MACH_TYPE_OMAP3_CPS + /* * High Level Configuration Options */ diff --git a/include/configs/ea20.h b/include/configs/ea20.h index 201e6b5..74fec3f 100644 --- a/include/configs/ea20.h +++ b/include/configs/ea20.h @@ -28,7 +28,12 @@ */ #define CONFIG_DRIVER_TI_EMAC #define CONFIG_USE_SPIFLASH +#define CONFIG_SYS_USE_NAND #define CONFIG_DRIVER_TI_EMAC_USE_RMII +#define CONFIG_BOARD_EARLY_INIT_F +#define BOARD_LATE_INIT +#define CONFIG_VIDEO +#define CONFIG_PREBOOT /* * SoC Configuration @@ -47,7 +52,7 @@ /* * Memory Info */ -#define CONFIG_SYS_MALLOC_LEN (0x10000 + 1*1024*1024) /* malloc() len */ +#define CONFIG_SYS_MALLOC_LEN (0x10000 + 4*1024*1024) /* malloc() len */ #define PHYS_SDRAM_1 DAVINCI_DDR_EMIF_DATA_BASE /* DDR Start */ #define PHYS_SDRAM_1_SIZE (64 << 20) /* SDRAM size 64MB */ #define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /* max size from SPRS586*/ @@ -67,7 +72,7 @@ #define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE -4 /* NS16550 register size */ -#define CONFIG_SYS_NS16550_COM1 DAVINCI_UART2_BASE /* Base address of UART2 */ +#define CONFIG_SYS_NS16550_COM1 DAVINCI_UART0_BASE /* Base address of UART0 */ #define CONFIG_SYS_NS16550_CLK clk_get(DAVINCI_UART2_CLKID) #define CONFIG_CONS_INDEX 1 /* use UART0 for console */ #define CONFIG_BAUDRATE 115200 /* Default baud rate */ @@ -83,6 +88,13 @@ #define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED /* + * I2C Configuration + */ +#define CONFIG_HARD_I2C +#define CONFIG_DRIVER_DAVINCI_I2C +#define CONFIG_SYS_I2C_SPEED 100000 + +/* * Network & Ethernet Configuration */ #ifdef CONFIG_DRIVER_TI_EMAC @@ -99,11 +111,22 @@ #undef CONFIG_ENV_IS_IN_NAND #define CONFIG_ENV_IS_IN_SPI_FLASH #define CONFIG_ENV_SIZE (8 << 10) -#define CONFIG_ENV_OFFSET (256 << 10) +#define CONFIG_ENV_OFFSET 0x80000 #define CONFIG_ENV_SECT_SIZE (64 << 10) #define CONFIG_SYS_NO_FLASH #endif + +#if defined(CONFIG_VIDEO) +#define CONFIG_VIDEO_DA8XX +#define CONFIG_CFB_CONSOLE +#define CONFIG_VGA_AS_SINGLE_DEVICE +#define CONFIG_SPLASH_SCREEN +#define CONFIG_VIDEO_LOGO +#define CONFIG_VIDEO_BMP_RLE8 +#define CONFIG_CMD_BMP +#endif + /* * U-Boot general configuration */ @@ -143,6 +166,7 @@ #define CONFIG_CMD_PING #define CONFIG_CMD_SAVES #define CONFIG_CMD_MEMORY +#define CONFIG_CMD_I2C #ifndef CONFIG_DRIVER_TI_EMAC #undef CONFIG_CMD_NET @@ -151,7 +175,8 @@ #undef CONFIG_CMD_PING #endif -#ifdef CONFIG_USE_NAND +/* NAND Setup */ +#ifdef CONFIG_SYS_USE_NAND #undef CONFIG_CMD_FLASH #undef CONFIG_CMD_IMLS #define CONFIG_CMD_NAND @@ -163,8 +188,20 @@ #define CONFIG_RBTREE #define CONFIG_CMD_UBI #define CONFIG_CMD_UBIFS + +#define CONFIG_NAND_DAVINCI +#define CONFIG_SYS_NAND_PAGE_2K +#define CONFIG_SYS_NAND_CS 2 +#define CONFIG_SYS_NAND_BASE DAVINCI_ASYNC_EMIF_DATA_CE2_BASE +#undef CONFIG_SYS_NAND_HW_ECC +#define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST +#define CONFIG_SYS_NAND_USE_FLASH_BBT +#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ +#define NAND_MAX_CHIPS 1 +#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ #endif +/* SPI Flash */ #ifdef CONFIG_USE_SPIFLASH #undef CONFIG_CMD_IMLS #undef CONFIG_CMD_FLASH @@ -173,7 +210,7 @@ #define CONFIG_CMD_SAVEENV #endif -#if !defined(CONFIG_USE_NAND) && \ +#if !defined(CONFIG_SYS_USE_NAND) && \ !defined(CONFIG_USE_NOR) && \ !defined(CONFIG_USE_SPIFLASH) #define CONFIG_ENV_IS_NOWHERE @@ -187,4 +224,83 @@ #define CONFIG_SYS_SDRAM_BASE 0xc0000000 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - \ GENERATED_GBL_DATA_SIZE) +/* + * Default environment and default scripts + * to update uboot and load kernel + */ +#define xstr(s) str(s) +#define str(s) #s + + +#define CONFIG_HOSTNAME ea20 +#define CONFIG_EXTRA_ENV_SETTINGS \ + "as=3\0" \ + "netdev=eth0\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath}\0" \ + "rfsbargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rfsbpath}\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "mtdids=nand0=davinci_nand.0\0" \ + "mtdparts=mtdparts=davinci_nand.0:8m(Settings),8m(aKernel)," \ + "8m(bKernel),76m(aRootfs),76m(bRootfs),-(MassSD)\0" \ + "nandargs=setenv bootargs rootfstype=ubifs ro chk_data_crc " \ + "ubi.mtd=${as} root=ubi0:rootfs\0" \ + "addip_sta=setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ + ":${hostname}:${netdev}:off panic=1\0" \ + "addip_dyn=setenv bootargs ${bootargs} ip=dhcp\0" \ + "addip=if test -n ${ipdyn};then run addip_dyn;" \ + "else run addip_sta;fi\0" \ + "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ + "addtty=setenv bootargs ${bootargs}" \ + " console=${consoledev},${baudrate}n8\0" \ + "addmisc=setenv bootargs ${bootargs} ${misc}\0" \ + "addmem=setenv bootargs ${bootargs} mem=${memory}\0" \ + "consoledev=ttyS0\0" \ + "loadaddr=c0000014\0" \ + "memory=32M\0" \ + "kernel_addr_r=c0700000\0" \ + "hostname=" xstr(CONFIG_HOSTNAME) "\0" \ + "bootfile=" xstr(CONFIG_HOSTNAME) "/uImage\0" \ + "ramdisk_file=" xstr(CONFIG_HOSTNAME) "/uRamdisk\0" \ + "flash_self=run ramargs addip addtty addmtd addmisc addmem;" \ + "bootm ${kernel_addr} ${ramdisk_addr}\0" \ + "flash_nfs=run nfsargs addip addtty addmtd addmisc addmem;" \ + "bootm ${kernel_addr}\0" \ + "net_nfs=tftp ${kernel_addr_r} ${bootfile}; " \ + "run nfsargs addip addtty addmtd addmisc addmem;" \ + "bootm ${kernel_addr_r}\0" \ + "net_rfsb=tftp ${kernel_addr_r} ${bootfile}; " \ + "run rfsbargs addip addtty addmtd addmisc addmem; " \ + "bootm ${kernel_addr_r}\0" \ + "net_self_load=tftp ${kernel_addr_r} ${bootfile};" \ + "tftp ${ramdisk_addr_r} ${ramdisk_file};\0" \ + "nand_nand=ubi part nand0,${as};ubifsmount rootfs;" \ + "ubifsload ${kernel_addr_r} /boot/uImage;" \ + "ubifsumount; run nandargs addip addtty " \ + "addmtd addmisc addmem;bootm ${kernel_addr_r}\0" \ + "u-boot=" xstr(CONFIG_HOSTNAME) "/u-boot.bin\0" \ + "load_magic=if sf probe 0;then sf " \ + "read c0000000 0x10000 0x60000;fi\0" \ + "load_nand=ubi part nand0,${as};ubifsmount rootfs;" \ + "if ubifsload c0000014 /boot/u-boot.bin;" \ + "then mw c0000008 ${filesize};else echo Error reading " \ + "u-boot from nand!;fi\0" \ + "load_net=if sf probe 0;then sf read c0000000 0x10000 0x60000;" \ + "tftp c0000014 ${u-boot};" \ + "mw c0000008 ${filesize};" \ + "fi\0" \ + "upd=if sf probe 0;then sf erase 10000 60000;" \ + "sf write c0000000 10000 60000;" \ + "fi\0" \ + "ubootupd_net=if run load_net;then echo Updating u-boot;" \ + "if run upd; then echo U-Boot updated;" \ + "else echo Error updating u-boot !;" \ + "echo Board without bootloader !!;" \ + "fi;" \ + "else echo U-Boot not downloaded..exiting;fi\0" \ + "ubootupd_nand=echo run load_magic,run load_nand,run upd;\0" \ + "bootcmd=run net_nfs\0" + #endif /* __CONFIG_H */ diff --git a/include/configs/eb_cpux9k2.h b/include/configs/eb_cpux9k2.h index 4324172..b08de4a 100644 --- a/include/configs/eb_cpux9k2.h +++ b/include/configs/eb_cpux9k2.h @@ -41,6 +41,8 @@ #define CONFIG_MISC_INIT_R #define CONFIG_BOARD_EARLY_INIT_F +#define MACH_TYPE_EB_CPUX9K2 1977 +#define CONFIG_MACH_TYPE MACH_TYPE_EB_CPUX9K2 /*--------------------------------------------------------------------------*/ #define CONFIG_SYS_TEXT_BASE 0x00000000 #define CONFIG_SYS_LOAD_ADDR 0x21000000 /* default load address */ diff --git a/include/configs/efikamx.h b/include/configs/efikamx.h index b507786..a07c8b5 100644 --- a/include/configs/efikamx.h +++ b/include/configs/efikamx.h @@ -132,7 +132,7 @@ #define CONFIG_FSL_PMIC_CLK 25000000 #define CONFIG_FSL_PMIC_MODE (SPI_MODE_0 | SPI_CS_HIGH) #define CONFIG_FSL_PMIC_BITLEN 32 -#define CONFIG_RTC_MC13783 +#define CONFIG_RTC_MC13XXX #endif /* diff --git a/include/configs/flea3.h b/include/configs/flea3.h new file mode 100644 index 0000000..d88c578 --- /dev/null +++ b/include/configs/flea3.h @@ -0,0 +1,286 @@ +/* + * (C) Copyright 2011, Stefano Babic <sbabic@denx.de> + * + * (C) Copyright 2008-2010 Freescale Semiconductor, Inc. + * + * Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de> + * + * Configuration for the flea3 board. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include <asm/arch/imx-regs.h> + + /* High Level Configuration Options */ +#define CONFIG_ARM1136 /* This is an arm1136 CPU core */ +#define CONFIG_MX35 +#define CONFIG_MX35_HCLK_FREQ 24000000 + +#define CONFIG_SYS_DCACHE_OFF + +#define CONFIG_DISPLAY_CPUINFO + +/* Only in case the value is not present in mach-types.h */ +#ifndef MACH_TYPE_FLEA3 +#define MACH_TYPE_FLEA3 3668 +#endif + +#define CONFIG_MACH_TYPE MACH_TYPE_FLEA3 + +/* Set TEXT at the beginning of the NOR flash */ +#define CONFIG_SYS_TEXT_BASE 0xA0000000 + +#define CONFIG_SYS_64BIT_VSPRINTF + +/* This is required to setup the ESDC controller */ +#define CONFIG_BOARD_EARLY_INIT_F + +#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ +#define CONFIG_REVISION_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG + +/* + * Size of malloc() pool + */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 1024 * 1024) + +/* + * Hardware drivers + */ +#define CONFIG_HARD_I2C +#define CONFIG_I2C_MXC +#define CONFIG_SYS_I2C_MX35_PORT3 +#define CONFIG_SYS_I2C_SPEED 100000 +#define CONFIG_SYS_I2C_SLAVE 0xfe +#define CONFIG_MXC_SPI +#define CONFIG_MXC_GPIO + +/* + * UART (console) + */ +#define CONFIG_MXC_UART +#define CONFIG_SYS_MX35_UART3 + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE +#define CONFIG_CONS_INDEX 1 +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200} + +/* + * Command definition + */ + +#include <config_cmd_default.h> + +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_DNS + +#define CONFIG_CMD_NAND + +#define CONFIG_CMD_I2C +#define CONFIG_CMD_SPI +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET +#define CONFIG_NET_RETRY_COUNT 100 + +#define CONFIG_BOOTDELAY 3 + +#define CONFIG_LOADADDR 0x90800000 /* loadaddr env var */ + + +/* + * Ethernet on SOC (FEC) + */ +#define CONFIG_NET_MULTI +#define CONFIG_FEC_MXC +#define IMX_FEC_BASE FEC_BASE_ADDR +#define CONFIG_PHYLIB +#define CONFIG_PHY_MICREL +#define CONFIG_FEC_MXC_PHYADDR 0x1 + +#define CONFIG_MII +#define CONFIG_DISCOVER_PHY + +#define CONFIG_ARP_TIMEOUT 200UL + +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_PROMPT "flea3 U-Boot > " +#define CONFIG_CMDLINE_EDITING +#define CONFIG_SYS_HUSH_PARSER /* Use the HUSH parser */ +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " + +#define CONFIG_AUTO_COMPLETE +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ + +#define CONFIG_SYS_MEMTEST_START 0 /* memtest works on */ +#define CONFIG_SYS_MEMTEST_END 0x10000 + +#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */ + +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR + +#define CONFIG_SYS_HZ 1000 + + +/* + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ + +/* + * Physical Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM_1 CSD1_BASE_ADDR +#define PHYS_SDRAM_1_SIZE (128 * 1024 * 1024) + +#define CONFIG_SYS_SDRAM_BASE CSD1_BASE_ADDR +#define CONFIG_SYS_INIT_RAM_ADDR (IRAM_BASE_ADDR + 0x10000) +#define CONFIG_SYS_INIT_RAM_SIZE (IRAM_SIZE / 2) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ + GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_GBL_DATA_OFFSET) + +/* + * MTD Command for mtdparts + */ +#define CONFIG_CMD_MTDPARTS +#define CONFIG_MTD_DEVICE +#define CONFIG_FLASH_CFI_MTD +#define CONFIG_MTD_PARTITIONS +#define MTDIDS_DEFAULT "nand0=mxc_nand,nor0=physmap-flash.0" +#define MTDPARTS_DEFAULT "mtdparts=mxc_nand:196m(root1)," \ + "196m(root2),-(user);" \ + "physmap-flash.0:512k(u-boot),64k(env1)," \ + "64k(env2),3776k(kernel1),3776k(kernel2)" +/* + * FLASH and environment organization + */ +#define CONFIG_SYS_FLASH_BASE CS0_BASE_ADDR +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max number of sectors on one chip */ +/* Monitor at beginning of flash */ +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE +#define CONFIG_SYS_MONITOR_LEN (512 * 1024) + +#define CONFIG_ENV_SECT_SIZE (64 * 1024) +#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE + +/* Address and size of Redundant Environment Sector */ +#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) +#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE + +#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + \ + CONFIG_SYS_MONITOR_LEN) + +#define CONFIG_ENV_IS_IN_FLASH + +/* + * CFI FLASH driver setup + */ +#define CONFIG_SYS_FLASH_CFI /* Flash memory is CFI compliant */ +#define CONFIG_FLASH_CFI_DRIVER + +/* A non-standard buffered write algorithm */ +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* faster */ +#define CONFIG_SYS_FLASH_PROTECTION /* Use hardware sector protection */ + +/* + * NAND FLASH driver setup + */ +#define CONFIG_NAND_MXC +#define CONFIG_NAND_MXC_V1_1 +#define CONFIG_MXC_NAND_REGS_BASE (NFC_BASE_ADDR) +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_BASE (NFC_BASE_ADDR) +#define CONFIG_MXC_NAND_HWECC +#define CONFIG_SYS_NAND_LARGEPAGE + +/* + * Default environment and default scripts + * to update uboot and load kernel + */ +#define xstr(s) str(s) +#define str(s) #s + +#define CONFIG_HOSTNAME flea3 +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath}\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "addip_sta=setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ + ":${hostname}:${netdev}:off panic=1\0" \ + "addip_dyn=setenv bootargs ${bootargs} ip=dhcp\0" \ + "addip=if test -n ${ipdyn};then run addip_dyn;" \ + "else run addip_sta;fi\0" \ + "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ + "addtty=setenv bootargs ${bootargs}" \ + " console=ttymxc0,${baudrate}\0" \ + "addmisc=setenv bootargs ${bootargs} ${misc}\0" \ + "loadaddr=90800000\0" \ + "kernel_addr_r=90800000\0" \ + "hostname=" xstr(CONFIG_HOSTNAME) "\0" \ + "bootfile=" xstr(CONFIG_HOSTNAME) "/uImage\0" \ + "ramdisk_file=" xstr(CONFIG_HOSTNAME) "/uRamdisk\0" \ + "flash_self=run ramargs addip addtty addmtd addmisc;" \ + "bootm ${kernel_addr} ${ramdisk_addr}\0" \ + "flash_nfs=run nfsargs addip addtty addmtd addmisc;" \ + "bootm ${kernel_addr}\0" \ + "net_nfs=tftp ${kernel_addr_r} ${bootfile}; " \ + "run nfsargs addip addtty addmtd addmisc;" \ + "bootm ${kernel_addr_r}\0" \ + "net_self_load=tftp ${kernel_addr_r} ${bootfile};" \ + "tftp ${ramdisk_addr_r} ${ramdisk_file};\0" \ + "net_self=if run net_self_load;then " \ + "run ramargs addip addtty addmtd addmisc;" \ + "bootm ${kernel_addr_r} ${ramdisk_addr_r};" \ + "else echo Images not loades;fi\0" \ + "u-boot=" xstr(CONFIG_HOSTNAME) "/u-boot.bin\0" \ + "load=tftp ${loadaddr} ${u-boot}\0" \ + "uboot_addr=" xstr(CONFIG_SYS_MONITOR_BASE) "\0" \ + "update=protect off ${uboot_addr} +40000;" \ + "erase ${uboot_addr} +40000;" \ + "cp.b ${loadaddr} ${uboot_addr} ${filesize}\0" \ + "upd=if run load;then echo Updating u-boot;if run update;" \ + "then echo U-Boot updated;" \ + "else echo Error updating u-boot !;" \ + "echo Board without bootloader !!;" \ + "fi;" \ + "else echo U-Boot not downloaded..exiting;fi\0" \ + "bootcmd=run net_nfs\0" + +#endif /* __CONFIG_H */ diff --git a/include/configs/gplugd.h b/include/configs/gplugd.h index 24bf767..9813309 100644 --- a/include/configs/gplugd.h +++ b/include/configs/gplugd.h @@ -32,6 +32,16 @@ #define __CONFIG_GPLUGD_H /* + * FIXME: fix for error caused due to recent update to mach-types.h + */ +#include <asm/mach-types.h> +#ifdef MACH_TYPE_SHEEVAD +#error "MACH_TYPE_SHEEVAD has been defined properly, please remove this." +#else +#define MACH_TYPE_SHEEVAD 2625 +#endif + +/* * Version number information */ #define CONFIG_IDENT_STRING "\nMarvell-gplugD" @@ -42,7 +52,7 @@ #define CONFIG_SHEEVA_88SV331xV5 1 /* CPU Core subversion */ #define CONFIG_ARMADA100 1 /* SOC Family Name */ #define CONFIG_ARMADA168 1 /* SOC Used on this Board */ -#define CONFIG_MACH_SHEEVAD /* Machine type */ +#define CONFIG_MACH_TYPE MACH_TYPE_SHEEVAD /* Machine type */ #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ #define CONFIG_SYS_TEXT_BASE 0x00f00000 diff --git a/include/configs/imx31_litekit.h b/include/configs/imx31_litekit.h index 89e71c0..1455ea2 100644 --- a/include/configs/imx31_litekit.h +++ b/include/configs/imx31_litekit.h @@ -81,7 +81,7 @@ #define CONFIG_FSL_PMIC_CLK 1000000 #define CONFIG_FSL_PMIC_MODE (SPI_MODE_0 | SPI_CS_HIGH) #define CONFIG_FSL_PMIC_BITLEN 32 -#define CONFIG_RTC_MC13783 +#define CONFIG_RTC_MC13XXX /* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE diff --git a/include/configs/imx31_phycore.h b/include/configs/imx31_phycore.h index f4bfee4..1b75197 100644 --- a/include/configs/imx31_phycore.h +++ b/include/configs/imx31_phycore.h @@ -30,25 +30,18 @@ #include <asm/arch/imx-regs.h> - /* High Level Configuration Options */ -#define CONFIG_ARM1136 1 /* This is an arm1136 CPU core */ -#define CONFIG_MX31 1 /* in a mx31 */ +/* High Level Configuration Options */ +#define CONFIG_ARM1136 /* This is an arm1136 CPU core */ +#define CONFIG_MX31 /* in a mx31 */ #define CONFIG_MX31_HCLK_FREQ 26000000 #define CONFIG_MX31_CLK32 32000 #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO -/* Temporarily disabled */ -#if 0 -#define CONFIG_OF_LIBFDT 1 -#define CONFIG_FIT 1 -#define CONFIG_FIT_VERBOSE 1 -#endif - -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 +#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG /* * Size of malloc() pool @@ -59,14 +52,14 @@ * Hardware drivers */ -#define CONFIG_HARD_I2C 1 -#define CONFIG_I2C_MXC 1 -#define CONFIG_SYS_I2C_MX31_PORT2 1 +#define CONFIG_HARD_I2C +#define CONFIG_I2C_MXC +#define CONFIG_SYS_I2C_MX31_PORT2 #define CONFIG_SYS_I2C_SPEED 100000 #define CONFIG_SYS_I2C_SLAVE 0xfe -#define CONFIG_MXC_UART 1 -#define CONFIG_SYS_MX31_UART1 1 +#define CONFIG_MXC_UART +#define CONFIG_SYS_MX31_UART1 /* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE @@ -86,42 +79,60 @@ #define CONFIG_BOOTDELAY 3 -#define MTDPARTS_DEFAULT "mtdparts=physmap-flash.0:128k(uboot)ro,1536k(kernel),-(root)" +#define MTDPARTS_DEFAULT "mtdparts=physmap-flash.0:128k(uboot)ro," \ + "1536k(kernel),-(root)" #define CONFIG_NETMASK 255.255.255.0 #define CONFIG_IPADDR 192.168.23.168 #define CONFIG_SERVERIP 192.168.23.2 -#define CONFIG_EXTRA_ENV_SETTINGS \ - "bootargs_base=setenv bootargs console=ttySMX0,115200\0" \ - "bootargs_nfs=setenv bootargs $(bootargs) root=/dev/nfs ip=dhcp nfsroot=$(serverip):$(nfsrootfs),v3,tcp\0" \ - "bootargs_flash=setenv bootargs $(bootargs) root=/dev/mtdblock2 rootfstype=jffs2" \ - "bootargs_mtd=setenv bootargs $(bootargs) $(mtdparts)" \ - "bootcmd=run bootcmd_net\0" \ - "bootcmd_net=run bootargs_base bootargs_mtd bootargs_nfs; tftpboot 0x80000000 $(uimage); bootm\0" \ - "bootcmd_flash=run bootargs_base bootargs_mtd bootargs_flash; bootm 0x80000000\0" \ - "unlock=yes\0" \ - "mtdparts=" MTDPARTS_DEFAULT "\0" \ - "prg_uboot=tftpboot 0x80000000 $(uboot); protect off 0xa0000000 +0x20000; erase 0xa0000000 +0x20000; cp.b 0x80000000 0xa0000000 $(filesize)\0" \ - "prg_kernel=tftpboot 0x80000000 $(uimage); erase 0xa0040000 +0x180000; cp.b 0x80000000 0xa0040000 $(filesize)\0" \ - "prg_jffs2=tftpboot 0x80000000 $(jffs2); erase 0xa01c0000 0xa1ffffff; cp.b 0x80000000 0xa01c0000 $(filesize)\0" \ - "videomode=video=ctfb:x:240,y:320,depth:16,mode:0,pclk:185925,le:9,ri:17,up:7,lo:10,hs:1,vs:1,sync:1241513985,vmode:0\0" - - -#define CONFIG_SMC911X 1 +#define CONFIG_EXTRA_ENV_SETTINGS \ + "bootargs_base=setenv bootargs console=ttySMX0,115200\0" \ + "bootargs_nfs=setenv bootargs $(bootargs) root=/dev/nfs " \ + "ip=dhcp nfsroot=$(serverip):$(nfsrootfs),v3,tcp\0" \ + "bootargs_flash=setenv bootargs $(bootargs) " \ + "root=/dev/mtdblock2 rootfstype=jffs2\0" \ + "bootargs_mtd=setenv bootargs $(bootargs) $(mtdparts)\0" \ + "bootcmd=run bootcmd_net\0" \ + "bootcmd_net=run bootargs_base bootargs_mtd bootargs_nfs;" \ + "tftpboot 0x80000000 $(uimage);bootm\0" \ + "bootcmd_flash=run bootargs_base bootargs_mtd bootargs_flash;" \ + "bootm 0x80000000\0" \ + "unlock=yes\0" \ + "mtdparts=" MTDPARTS_DEFAULT "\0" \ + "prg_uboot=tftpboot 0x80000000 $(uboot);" \ + "protect off 0xa0000000 +0x20000;" \ + "erase 0xa0000000 +0x20000;" \ + "cp.b 0x80000000 0xa0000000 $(filesize)\0" \ + "prg_kernel=tftpboot 0x80000000 $(uimage);" \ + "erase 0xa0040000 +0x180000;" \ + "cp.b 0x80000000 0xa0040000 $(filesize)\0" \ + "prg_jffs2=tftpboot 0x80000000 $(jffs2);" \ + "erase 0xa01c0000 0xa1ffffff;" \ + "cp.b 0x80000000 0xa01c0000 $(filesize)\0" \ + "videomode=video=ctfb:x:240,y:320,depth:16,mode:0," \ + "pclk:185925,le:9,ri:17,up:7,lo:10,hs:1,vs:1," \ + "sync:1241513985,vmode:0\0" + + +#define CONFIG_SMC911X #define CONFIG_SMC911X_BASE 0xa8000000 -#define CONFIG_SMC911X_32_BIT 1 +#define CONFIG_SMC911X_32_BIT /* * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_PROMPT "uboot> " -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +/* Console I/O Buffer Size */ +#define CONFIG_SYS_CBSIZE 256 /* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) +/* max number of command args */ +#define CONFIG_SYS_MAXARGS 16 +/* Boot Argument Buffer Size */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE #define CONFIG_SYS_MEMTEST_START 0 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x10000 @@ -130,21 +141,21 @@ #define CONFIG_SYS_HZ 1000 -#define CONFIG_CMDLINE_EDITING 1 +#define CONFIG_CMDLINE_EDITING -/*----------------------------------------------------------------------- +/* * Stack sizes * * The stack sizes are set up in start.S using the settings below */ #define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ -/*----------------------------------------------------------------------- +/* * Physical Memory Map */ -#define CONFIG_NR_DRAM_BANKS 1 -#define PHYS_SDRAM_1 0x80000000 -#define PHYS_SDRAM_1_SIZE (128 * 1024 * 1024) +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM_1 0x80000000 +#define PHYS_SDRAM_1_SIZE (128 * 1024 * 1024) #define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_SYS_TEXT_BASE 0xA0000000 @@ -156,33 +167,37 @@ #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ CONFIG_SYS_GBL_DATA_OFFSET) -/*----------------------------------------------------------------------- +/* * FLASH and environment organization */ #define CONFIG_SYS_FLASH_BASE 0xa0000000 -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 259 /* max number of sectors on one chip */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE /* Monitor at beginning of flash */ - -#define CONFIG_ENV_IS_IN_EEPROM 1 -#define CONFIG_ENV_OFFSET 0x00 /* environment starts here */ -#define CONFIG_ENV_SIZE 4096 +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max # of memory banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 259 /* max # of sectors/chip */ +/* Monitor at beginning of flash */ +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE + +#define CONFIG_ENV_IS_IN_EEPROM +#define CONFIG_ENV_OFFSET 0x00 /* env. starts here */ +#define CONFIG_ENV_SIZE 4096 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x52 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5 /* 5 bits = 32 octets */ -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* between stop and start */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 /* length of byte address */ +#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5 /* 5 bits = 32 octets */ +#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* 10 ms delay */ +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 /* byte addr. lenght */ -/*----------------------------------------------------------------------- +/* * CFI FLASH driver setup */ -#define CONFIG_SYS_FLASH_CFI 1 /* Flash memory is CFI compliant */ -#define CONFIG_FLASH_CFI_DRIVER 1 /* Use drivers/cfi_flash.c */ -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* Use buffered writes (~10x faster) */ -#define CONFIG_SYS_FLASH_PROTECTION 1 /* Use hardware sector protection */ +#define CONFIG_SYS_FLASH_CFI /* Flash memory is CFI compliant */ +#define CONFIG_FLASH_CFI_DRIVER /* Use drivers/mtd/cfi_flash.c */ +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* buffered writes (~10x faster) */ +#define CONFIG_SYS_FLASH_PROTECTION /* Use hardware sector protection */ -/* timeout values are in ticks */ -#define CONFIG_SYS_FLASH_ERASE_TOUT (100*CONFIG_SYS_HZ) /* Timeout for Flash Erase */ -#define CONFIG_SYS_FLASH_WRITE_TOUT (100*CONFIG_SYS_HZ) /* Timeout for Flash Write */ +/* + * Timeout for Flash Erase and Flash Write + * timeout values are in ticks + */ +#define CONFIG_SYS_FLASH_ERASE_TOUT (100*CONFIG_SYS_HZ) +#define CONFIG_SYS_FLASH_WRITE_TOUT (100*CONFIG_SYS_HZ) /* * JFFS2 partitions @@ -196,11 +211,11 @@ #define CONFIG_MXC_GPIO -#define CONFIG_HARD_SPI 1 -#define CONFIG_MXC_SPI 1 +#define CONFIG_HARD_SPI +#define CONFIG_MXC_SPI #define CONFIG_CMD_SPI -#define CONFIG_S6E63D6 1 +#define CONFIG_S6E63D6 #define CONFIG_VIDEO #define CONFIG_CFB_CONSOLE diff --git a/include/configs/jadecpu.h b/include/configs/jadecpu.h index a239efc..f72ee02 100644 --- a/include/configs/jadecpu.h +++ b/include/configs/jadecpu.h @@ -37,6 +37,10 @@ #define CONFIG_USE_ARCH_MEMCPY #define CONFIG_USE_ARCH_MEMSET +#define MACH_TYPE_JADECPU 2636 + +#define CONFIG_MACH_TYPE MACH_TYPE_JADECPU + /* * Environment settings */ diff --git a/include/configs/km/km_arm.h b/include/configs/km/km_arm.h index c117943..700124c 100644 --- a/include/configs/km/km_arm.h +++ b/include/configs/km/km_arm.h @@ -36,6 +36,9 @@ #ifndef _CONFIG_KM_ARM_H #define _CONFIG_KM_ARM_H +/* We got removed from Linux mach-types.h */ +#define MACH_TYPE_KM_KIRKWOOD 2255 + /* * High Level Configuration Options (easy to change) */ @@ -45,6 +48,8 @@ #define CONFIG_KW88F6281 /* SOC Name */ #define CONFIG_MACH_KM_KIRKWOOD /* Machine type */ +#define CONFIG_MACH_TYPE MACH_TYPE_KM_KIRKWOOD + /* include common defines/options for all Keymile boards */ #include "keymile-common.h" @@ -69,7 +74,8 @@ /* architecture specific default bootargs */ #define CONFIG_KM_DEF_BOOT_ARGS_CPU \ - "bootcountaddr=${bootcountaddr} ${mtdparts}" + "bootcountaddr=${bootcountaddr} ${mtdparts}" \ + " boardid=0x${IVM_BoardId} hwkey=0x${IVM_HWKey}" #define CONFIG_KM_DEF_ENV_CPU \ "boot=bootm ${load_addr_r} - -\0" \ @@ -254,7 +260,6 @@ int get_scl(void); #if defined(CONFIG_SYS_NO_FLASH) #define CONFIG_KM_UBI_PARTITION_NAME "ubi0" #undef CONFIG_FLASH_CFI_MTD -#undef CONFIG_CMD_JFFS2 #undef CONFIG_JFFS2_CMDLINE #endif diff --git a/include/configs/km_kirkwood.h b/include/configs/km_kirkwood.h index e51b270..ed36124 100644 --- a/include/configs/km_kirkwood.h +++ b/include/configs/km_kirkwood.h @@ -54,4 +54,7 @@ #define KM_IVM_BUS "pca9544a:70:9" /* I2C2 (Mux-Port 1)*/ #define KM_ENV_BUS "pca9544a:70:d" /* I2C2 (Mux-Port 5)*/ +/* GPIO Pin from kirkwood connected to PROGRAM_B pin of the xilinx FPGA */ +#define KM_XLX_PROGRAM_B_PIN 39 + #endif /* _CONFIG_KM_KIRKWOOD */ diff --git a/include/configs/meesc.h b/include/configs/meesc.h index a2b55d5..ea40290 100644 --- a/include/configs/meesc.h +++ b/include/configs/meesc.h @@ -45,6 +45,14 @@ */ #define CONFIG_SYS_TEXT_BASE 0x20002000 +/* + * since a number of boards are not being listed in linux + * arch/arm/tools/mach-types any more, the mach-types have to be + * defined here + */ +#define MACH_TYPE_MEESC 2165 +#define MACH_TYPE_ETHERCAN2 2407 + /* ARM asynchronous clock */ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* 32.768 kHz crystal */ #define CONFIG_SYS_AT91_MAIN_CLOCK 16000000/* 16.0 MHz crystal */ diff --git a/include/configs/mgcoge3un.h b/include/configs/mgcoge3un.h index ac01a31..797b0df 100644 --- a/include/configs/mgcoge3un.h +++ b/include/configs/mgcoge3un.h @@ -76,6 +76,8 @@ MVGBE_SET_GMII_SPEED_TO_10_100 |\ MVGBE_SET_MII_SPEED_TO_100) +#define CONFIG_KM_BOARD_EXTRA_ENV "waitforne=true\0" + /* * PCIe port not used on mgcoge3un */ diff --git a/include/configs/mx31ads.h b/include/configs/mx31ads.h index c9d80ef..7e011ae 100644 --- a/include/configs/mx31ads.h +++ b/include/configs/mx31ads.h @@ -78,7 +78,7 @@ #define CONFIG_FSL_PMIC_CLK 1000000 #define CONFIG_FSL_PMIC_MODE (SPI_MODE_0 | SPI_CS_HIGH) #define CONFIG_FSL_PMIC_BITLEN 32 -#define CONFIG_RTC_MC13783 +#define CONFIG_RTC_MC13XXX /* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE diff --git a/include/configs/mx31pdk.h b/include/configs/mx31pdk.h index 2e5cde5..4253c3e 100644 --- a/include/configs/mx31pdk.h +++ b/include/configs/mx31pdk.h @@ -79,7 +79,7 @@ #define CONFIG_FSL_PMIC_CLK 1000000 #define CONFIG_FSL_PMIC_MODE (SPI_MODE_0 | SPI_CS_HIGH) #define CONFIG_FSL_PMIC_BITLEN 32 -#define CONFIG_RTC_MC13783 +#define CONFIG_RTC_MC13XXX /* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE diff --git a/include/configs/mx35pdk.h b/include/configs/mx35pdk.h index 79bae56..32ed609 100644 --- a/include/configs/mx35pdk.h +++ b/include/configs/mx35pdk.h @@ -73,6 +73,7 @@ #define CONFIG_PMIC_I2C #define CONFIG_PMIC_FSL #define CONFIG_SYS_FSL_PMIC_I2C_ADDR 0x08 +#define CONFIG_RTC_MC13XXX /* * MFD MC9SDZ60 @@ -111,6 +112,7 @@ #define CONFIG_CMD_MII #define CONFIG_CMD_NET #define CONFIG_NET_RETRY_COUNT 100 +#define CONFIG_CMD_DATE #define CONFIG_BOOTDELAY 3 diff --git a/include/configs/mx51evk.h b/include/configs/mx51evk.h index 028a842..7c7544f 100644 --- a/include/configs/mx51evk.h +++ b/include/configs/mx51evk.h @@ -41,12 +41,11 @@ * increase in the final file size: 144260 vs. 109536 Bytes. */ -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_REVISION_TAG 1 -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 +#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG -#define CONFIG_OF_LIBFDT 1 +#define CONFIG_OF_LIBFDT #define CONFIG_MACH_TYPE MACH_TYPE_MX51_BABBAGE /* @@ -79,6 +78,7 @@ #define CONFIG_FSL_PMIC_CLK 2500000 #define CONFIG_FSL_PMIC_MODE (SPI_MODE_0 | SPI_CS_HIGH) #define CONFIG_FSL_PMIC_BITLEN 32 +#define CONFIG_RTC_MC13XXX /* * MMC Configs @@ -124,9 +124,11 @@ #undef CONFIG_CMD_IMLS +#define CONFIG_CMD_DATE + #define CONFIG_BOOTDELAY 3 -#define CONFIG_PRIME "FEC0" +#define CONFIG_ETHPRIME "FEC0" #define CONFIG_LOADADDR 0x90800000 /* loadaddr env var */ diff --git a/include/configs/mx53ard.h b/include/configs/mx53ard.h index 3e99031..15dfcb4 100644 --- a/include/configs/mx53ard.h +++ b/include/configs/mx53ard.h @@ -34,7 +34,6 @@ #include <asm/arch/imx-regs.h> #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ -#define CONFIG_REVISION_TAG #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_INITRD_TAG @@ -90,7 +89,7 @@ #define CONFIG_BOOTDELAY 3 -#define CONFIG_PRIME "smc911x" +#define CONFIG_ETHPRIME "smc911x" /*Support LAN9217*/ #define CONFIG_SMC911X diff --git a/include/configs/mx53evk.h b/include/configs/mx53evk.h index 4703248..7c49136 100644 --- a/include/configs/mx53evk.h +++ b/include/configs/mx53evk.h @@ -33,12 +33,11 @@ #include <asm/arch/imx-regs.h> -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_REVISION_TAG 1 -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 +#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG -#define CONFIG_OF_LIBFDT 1 +#define CONFIG_OF_LIBFDT /* Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024) @@ -51,9 +50,9 @@ #define CONFIG_SYS_MX53_UART1 /* I2C Configs */ -#define CONFIG_CMD_I2C 1 -#define CONFIG_HARD_I2C 1 -#define CONFIG_I2C_MXC 1 +#define CONFIG_CMD_I2C +#define CONFIG_HARD_I2C +#define CONFIG_I2C_MXC #define CONFIG_SYS_I2C_MX53_PORT2 1 #define CONFIG_SYS_I2C_SPEED 100000 #define CONFIG_SYS_I2C_SLAVE 0xfe @@ -63,6 +62,7 @@ #define CONFIG_PMIC_I2C #define CONFIG_PMIC_FSL #define CONFIG_SYS_FSL_PMIC_I2C_ADDR 8 +#define CONFIG_RTC_MC13XXX /* MMC Configs */ #define CONFIG_FSL_ESDHC @@ -88,6 +88,7 @@ #define CONFIG_CMD_DHCP #define CONFIG_CMD_MII #define CONFIG_CMD_NET +#define CONFIG_CMD_DATE /* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE @@ -102,7 +103,7 @@ #define CONFIG_BOOTDELAY 3 -#define CONFIG_PRIME "FEC0" +#define CONFIG_ETHPRIME "FEC0" #define CONFIG_LOADADDR 0x70800000 /* loadaddr env var */ #define CONFIG_SYS_TEXT_BASE 0x77800000 diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h index c3e4e13..d699010 100644 --- a/include/configs/mx53loco.h +++ b/include/configs/mx53loco.h @@ -35,7 +35,6 @@ #include <asm/arch/imx-regs.h> #define CONFIG_CMDLINE_TAG -#define CONFIG_REVISION_TAG #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_INITRD_TAG @@ -86,7 +85,7 @@ #define CONFIG_BOOTDELAY 3 -#define CONFIG_PRIME "FEC0" +#define CONFIG_ETHPRIME "FEC0" #define CONFIG_LOADADDR 0x70800000 /* loadaddr env var */ #define CONFIG_SYS_TEXT_BASE 0x77800000 diff --git a/include/configs/mx53smd.h b/include/configs/mx53smd.h index c117a33..48b32dd 100644 --- a/include/configs/mx53smd.h +++ b/include/configs/mx53smd.h @@ -34,7 +34,6 @@ #include <asm/arch/imx-regs.h> #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ -#define CONFIG_REVISION_TAG #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_INITRD_TAG @@ -93,7 +92,7 @@ #define CONFIG_BOOTDELAY 3 -#define CONFIG_PRIME "FEC0" +#define CONFIG_ETHPRIME "FEC0" #define CONFIG_LOADADDR 0x70800000 /* loadaddr env var */ #define CONFIG_SYS_TEXT_BASE 0x77800000 diff --git a/include/configs/netspace_v2.h b/include/configs/netspace_v2.h index 82a1233..bb27ed7 100644 --- a/include/configs/netspace_v2.h +++ b/include/configs/netspace_v2.h @@ -60,11 +60,16 @@ */ #define CONFIG_SYS_TCLK 166000000 /* 166MHz */ +#define CONFIG_NR_DRAM_BANKS 1 +#ifdef CONFIG_INETSPACE_V2 +/* Different SDRAM configuration and size for Internet Space v2 */ +#define CONFIG_SYS_KWD_CONFIG ($(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage-is2.cfg) +#endif + /* * mv-common.h should be defined after CMD configs since it used them * to enable certain macros */ -#define CONFIG_NR_DRAM_BANKS 2 #include "mv-common.h" /* Remove or override few declarations from mv-common.h */ @@ -103,6 +108,17 @@ #define CONFIG_KIRKWOOD_GPIO /* + * Enable I2C support + */ +#ifdef CONFIG_CMD_I2C +/* I2C EEPROM HT24LC04 (512B - 32 pages of 16 Bytes) */ +#define CONFIG_CMD_EEPROM +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 /* 16-byte page size */ +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* 8-bit device address */ +#endif /* CONFIG_CMD_I2C */ + +/* * File systems support */ #define CONFIG_CMD_EXT2 diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h index 7a76288..47ec39f 100644 --- a/include/configs/omap3_evm.h +++ b/include/configs/omap3_evm.h @@ -1,6 +1,8 @@ /* - * (C) Copyright 2006-2008 - * Texas Instruments. + * Configuration settings for the TI OMAP3 EVM board. + * + * Copyright (C) 2006-2011 Texas Instruments Incorporated - http://www.ti.com/ + * * Author : * Manikandan Pillai <mani.pillai@ti.com> * Derived from Beagle Board and 3430 SDP code by @@ -9,8 +11,6 @@ * * Manikandan Pillai <mani.pillai@ti.com> * - * Configuration settings for the TI OMAP3 EVM board. - * * See file CREDITS for list of people who contributed to this * project. * @@ -30,172 +30,82 @@ * MA 02111-1307 USA */ -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - */ -#define CONFIG_OMAP 1 /* in a TI OMAP core */ -#define CONFIG_OMAP34XX 1 /* which is a 34XX */ -#define CONFIG_OMAP3430 1 /* which is in a 3430 */ -#define CONFIG_OMAP3_EVM 1 /* working with EVM */ - -#define CONFIG_SDRC /* The chip has SDRC controller */ +#ifndef __OMAP3EVM_CONFIG_H +#define __OMAP3EVM_CONFIG_H -#include <asm/arch/cpu.h> /* get chip and board defs */ +#include <asm/arch/cpu.h> #include <asm/arch/omap3.h> -/* - * Display CPU and Board information +/* ---------------------------------------------------------------------------- + * Supported U-boot commands + * ---------------------------------------------------------------------------- */ -#define CONFIG_DISPLAY_CPUINFO 1 -#define CONFIG_DISPLAY_BOARDINFO 1 +#include <config_cmd_default.h> -/* Clock Defines */ -#define V_OSCK 26000000 /* Clock output from T2 */ -#define V_SCLK (V_OSCK >> 1) +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_CMD_JFFS2 -#undef CONFIG_USE_IRQ /* no support for IRQs */ -#define CONFIG_MISC_INIT_R +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MMC +#define CONFIG_CMD_NAND +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_PING -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 -#define CONFIG_REVISION_TAG 1 +#undef CONFIG_CMD_FLASH /* flinfo, erase, protect */ +#undef CONFIG_CMD_FPGA /* FPGA configuration Support */ +#undef CONFIG_CMD_IMI /* iminfo */ +#undef CONFIG_CMD_IMLS /* List all found images */ -/* - * Size of malloc() pool - */ -#define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ - /* Sector */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10)) -/* - * Hardware drivers +/* ---------------------------------------------------------------------------- + * Supported U-boot features + * ---------------------------------------------------------------------------- */ +#define CONFIG_SYS_LONGHELP +#define CONFIG_SYS_HUSH_PARSER -/* - * NS16550 Configuration - */ -#define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */ +/* Display CPU and Board information */ +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DISPLAY_BOARDINFO -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE (-4) -#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK +/* Allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE -/* - * select serial console configuration - */ -#define CONFIG_CONS_INDEX 1 -#define CONFIG_SYS_NS16550_COM1 OMAP34XX_UART1 -#define CONFIG_SERIAL1 1 /* UART1 on OMAP3 EVM */ +/* Add auto-completion support */ +#define CONFIG_AUTO_COMPLETE -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE -#define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ - 115200} -#define CONFIG_MMC 1 -#define CONFIG_GENERIC_MMC 1 -#define CONFIG_OMAP_HSMMC 1 -#define CONFIG_DOS_PARTITION 1 +/* ---------------------------------------------------------------------------- + * Supported hardware + * ---------------------------------------------------------------------------- + */ -/* DDR - I use Micron DDR */ -#define CONFIG_OMAP3_MICRON_DDR 1 +/* MMC */ +#define CONFIG_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_OMAP_HSMMC +#define CONFIG_DOS_PARTITION /* USB + * * Enable CONFIG_MUSB_HCD for Host functionalities MSC, keyboard * Enable CONFIG_MUSB_UDD for Device functionalities. */ -#define CONFIG_USB_OMAP3 1 -#define CONFIG_MUSB_HCD 1 -/* #define CONFIG_MUSB_UDC 1 */ - -#ifdef CONFIG_USB_OMAP3 - -#ifdef CONFIG_MUSB_HCD -#define CONFIG_CMD_USB - -#define CONFIG_USB_STORAGE -#define CONGIG_CMD_STORAGE -#define CONFIG_CMD_FAT - -#ifdef CONFIG_USB_KEYBOARD -#define CONFIG_SYS_USB_EVENT_POLL -#define CONFIG_PREBOOT "usb start" -#endif /* CONFIG_USB_KEYBOARD */ - -#endif /* CONFIG_MUSB_HCD */ +#define CONFIG_USB_OMAP3 +#define CONFIG_MUSB_HCD +/* #define CONFIG_MUSB_UDC */ -#ifdef CONFIG_MUSB_UDC -/* USB device configuration */ -#define CONFIG_USB_DEVICE 1 -#define CONFIG_USB_TTY 1 -#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1 -/* Change these to suit your needs */ -#define CONFIG_USBD_VENDORID 0x0451 -#define CONFIG_USBD_PRODUCTID 0x5678 -#define CONFIG_USBD_MANUFACTURER "Texas Instruments" -#define CONFIG_USBD_PRODUCT_NAME "EVM" -#endif /* CONFIG_MUSB_UDC */ - -#endif /* CONFIG_USB_OMAP3 */ - -/* commands to include */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_EXT2 /* EXT2 Support */ -#define CONFIG_CMD_FAT /* FAT support */ -#define CONFIG_CMD_JFFS2 /* JFFS2 Support */ - -#define CONFIG_CMD_I2C /* I2C serial bus support */ -#define CONFIG_CMD_MMC /* MMC support */ -#define CONFIG_CMD_NAND /* NAND support */ -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_PING - -#undef CONFIG_CMD_FLASH /* flinfo, erase, protect */ -#undef CONFIG_CMD_FPGA /* FPGA configuration Support */ -#undef CONFIG_CMD_IMI /* iminfo */ -#undef CONFIG_CMD_IMLS /* List all found images */ - -#define CONFIG_SYS_NO_FLASH -#define CONFIG_HARD_I2C 1 -#define CONFIG_SYS_I2C_SPEED 100000 -#define CONFIG_SYS_I2C_SLAVE 1 -#define CONFIG_SYS_I2C_BUS 0 -#define CONFIG_SYS_I2C_BUS_SELECT 1 -#define CONFIG_DRIVER_OMAP34XX_I2C 1 - -/* - * TWL4030 +/* ----------------------------------------------------------------------------- + * Include common board configuration + * ----------------------------------------------------------------------------- */ -#define CONFIG_TWL4030_POWER 1 +#include "omap3_evm_common.h" -/* - * Board NAND Info. +/* ----------------------------------------------------------------------------- + * Default environment + * ----------------------------------------------------------------------------- */ -#define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */ - /* to access nand */ -#define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */ - /* to access */ - /* nand at CS0 */ - -#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of */ - /* NAND devices */ -#define CONFIG_JFFS2_NAND -/* nand device jffs2 lives on */ -#define CONFIG_JFFS2_DEV "nand0" -/* start of jffs2 partition */ -#define CONFIG_JFFS2_PART_OFFSET 0x680000 -#define CONFIG_JFFS2_PART_SIZE 0xf980000 /* sz of jffs2 part */ - -/* Environment information */ #define CONFIG_BOOTDELAY 10 -#define CONFIG_BOOTFILE "uImage" - #define CONFIG_EXTRA_ENV_SETTINGS \ "loadaddr=0x82000000\0" \ "usbtty=cdc_acm\0" \ @@ -231,133 +141,4 @@ "fi; " \ "else run nandboot; fi" -#define CONFIG_AUTO_COMPLETE 1 -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " -#define CONFIG_SYS_PROMPT "OMAP3_EVM # " -#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 16 /* max number of command */ - /* args */ -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) -/* memtest works on */ -#define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0) -#define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \ - 0x01F00000) /* 31MB */ - -#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default load */ - /* address */ - -/* - * OMAP3 has 12 GP timers, they can be driven by the system clock - * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK). - * This rate is divided by a local divisor. - */ -#define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2 -#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000 - -/*----------------------------------------------------------------------- - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4 << 10) /* IRQ stack 4 KiB */ -#define CONFIG_STACKSIZE_FIQ (4 << 10) /* FIQ stack 4 KiB */ -#endif - -/*----------------------------------------------------------------------- - * Physical Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ -#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 -#define PHYS_SDRAM_1_SIZE (32 << 20) /* at least 32 MiB */ -#define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 - -/* SDRAM Bank Allocation method */ -#define SDRC_R_B_C 1 - -/*----------------------------------------------------------------------- - * FLASH and environment organization - */ - -/* **** PISMO SUPPORT *** */ - -/* Configure the PISMO */ -#define PISMO1_NAND_SIZE GPMC_SIZE_128M -#define PISMO1_ONEN_SIZE GPMC_SIZE_128M - -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ - -#if defined(CONFIG_CMD_NAND) -#define CONFIG_SYS_FLASH_BASE PISMO1_NAND_BASE -#elif defined(CONFIG_CMD_ONENAND) -#define CONFIG_SYS_FLASH_BASE PISMO1_ONEN_BASE -#endif - -/* Monitor at start of flash */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_ONENAND_BASE ONENAND_MAP - -#define ONENAND_ENV_OFFSET 0x260000 /* environment starts here */ -#define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */ - -#if defined(CONFIG_CMD_NAND) -#define CONFIG_NAND_OMAP_GPMC -#define GPMC_NAND_ECC_LP_x16_LAYOUT 1 -#define CONFIG_ENV_IS_IN_NAND -#define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET -#elif defined(CONFIG_CMD_ONENAND) -#define CONFIG_ENV_IS_IN_ONENAND 1 -#define CONFIG_ENV_OFFSET ONENAND_ENV_OFFSET -#endif - -#define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ -#define CONFIG_ENV_ADDR CONFIG_ENV_OFFSET - -/* - * Support for relocation - */ -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800 -#define CONFIG_SYS_INIT_RAM_SIZE 0x800 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) - -/* - * Define the board revision statically - */ -/* #define CONFIG_STATIC_BOARD_REV OMAP3EVM_BOARD_GEN_2 */ - -/*---------------------------------------------------------------------------- - * SMSC9115 Ethernet from SMSC9118 family - *---------------------------------------------------------------------------- - */ -#if defined(CONFIG_CMD_NET) - -#define CONFIG_SMC911X -#define CONFIG_SMC911X_32_BIT -#define CONFIG_SMC911X_BASE 0x2C000000 - -#endif /* (CONFIG_CMD_NET) */ - -/* - * BOOTP fields - */ - -#define CONFIG_BOOTP_SUBNETMASK 0x00000001 -#define CONFIG_BOOTP_GATEWAY 0x00000002 -#define CONFIG_BOOTP_HOSTNAME 0x00000004 -#define CONFIG_BOOTP_BOOTPATH 0x00000010 - -#endif /* __CONFIG_H */ +#endif /* __OMAP3EVM_CONFIG_H */ diff --git a/include/configs/omap3_evm_common.h b/include/configs/omap3_evm_common.h new file mode 100644 index 0000000..54aa7a7 --- /dev/null +++ b/include/configs/omap3_evm_common.h @@ -0,0 +1,292 @@ +/* + * Common configuration settings for the TI OMAP3 EVM board. + * + * Copyright (C) 2006-2011 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __OMAP3_EVM_COMMON_H +#define __OMAP3_EVM_COMMON_H + +/* + * High level configuration options + */ +#define CONFIG_OMAP /* This is TI OMAP core */ +#define CONFIG_OMAP34XX /* belonging to 34XX family */ +#define CONFIG_OMAP3430 /* which is in a 3430 */ + +#define CONFIG_SDRC /* The chip has SDRC controller */ + +#define CONFIG_OMAP3_EVM /* This is a OMAP3 EVM */ +#define CONFIG_OMAP3_MICRON_DDR /* with MICRON DDR part */ +#define CONFIG_TWL4030_POWER /* with TWL4030 PMIC */ + +#undef CONFIG_USE_IRQ /* no support for IRQs */ + +/* + * Clock related definitions + */ +#define V_OSCK 26000000 /* Clock output from T2 */ +#define V_SCLK (V_OSCK >> 1) + +/* + * OMAP3 has 12 GP timers, they can be driven by the system clock + * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK). + * This rate is divided by a local divisor. + */ +#define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2 +#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ +#define CONFIG_SYS_HZ 1000 + +/* Size of environment - 128KB */ +#define CONFIG_ENV_SIZE (128 << 10) + +/* Size of malloc pool */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10)) + +/* + * Stack sizes + * These values are used in start.S + */ +#define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */ + +#ifdef CONFIG_USE_IRQ +#define CONFIG_STACKSIZE_IRQ (4 << 10) /* IRQ stack 4 KiB */ +#define CONFIG_STACKSIZE_FIQ (4 << 10) /* FIQ stack 4 KiB */ +#endif + +/* + * Physical Memory Map + * Note 1: CS1 may or may not be populated + * Note 2: SDRAM size is expected to be at least 32MB + */ +#define CONFIG_NR_DRAM_BANKS 2 +#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 +#define PHYS_SDRAM_1_SIZE (32 << 20) +#define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 + +/* SDRAM Bank Allocation method */ +#define SDRC_R_B_C + +/* Limits for memtest */ +#define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0) +#define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \ + 0x01F00000) /* 31MB */ + +/* Default load address */ +#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) + +/* ----------------------------------------------------------------------------- + * Hardware drivers + * ----------------------------------------------------------------------------- + */ + +/* + * NS16550 Configuration + */ +#define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */ + +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE (-4) +#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK + +/* + * select serial console configuration + */ +#define CONFIG_CONS_INDEX 1 +#define CONFIG_SERIAL1 1 /* UART1 on OMAP3 EVM */ +#define CONFIG_SYS_NS16550_COM1 OMAP34XX_UART1 +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ + 115200} + +/* + * I2C + */ +#define CONFIG_HARD_I2C +#define CONFIG_DRIVER_OMAP34XX_I2C + +#define CONFIG_SYS_I2C_SPEED 100000 +#define CONFIG_SYS_I2C_SLAVE 1 +#define CONFIG_SYS_I2C_BUS 0 +#define CONFIG_SYS_I2C_BUS_SELECT 1 + +/* + * PISMO support + */ +#define PISMO1_NAND_SIZE GPMC_SIZE_128M +#define PISMO1_ONEN_SIZE GPMC_SIZE_128M + +/* Monitor at start of flash - Reserve 2 sectors */ +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE + +#define CONFIG_SYS_MONITOR_LEN (256 << 10) + +/* Start location & size of environment */ +#define ONENAND_ENV_OFFSET 0x260000 +#define SMNAND_ENV_OFFSET 0x260000 + +#define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ + +/* + * NAND + */ +/* Physical address to access NAND */ +#define CONFIG_SYS_NAND_ADDR NAND_BASE + +/* Physical address to access NAND at CS0 */ +#define CONFIG_SYS_NAND_BASE NAND_BASE + +/* Max number of NAND devices */ +#define CONFIG_SYS_MAX_NAND_DEVICE 1 + +/* Timeout values (in ticks) */ +#define CONFIG_SYS_FLASH_ERASE_TOUT (100 * CONFIG_SYS_HZ) +#define CONFIG_SYS_FLASH_WRITE_TOUT (100 * CONFIG_SYS_HZ) + +/* Flash banks JFFS2 should use */ +#define CONFIG_SYS_MAX_MTD_BANKS (CONFIG_SYS_MAX_FLASH_BANKS + \ + CONFIG_SYS_MAX_NAND_DEVICE) + +#define CONFIG_SYS_JFFS2_MEM_NAND +#define CONFIG_SYS_JFFS2_FIRST_BANK CONFIG_SYS_MAX_FLASH_BANKS +#define CONFIG_SYS_JFFS2_NUM_BANKS 1 + +#define CONFIG_JFFS2_NAND +/* nand device jffs2 lives on */ +#define CONFIG_JFFS2_DEV "nand0" +/* Start of jffs2 partition */ +#define CONFIG_JFFS2_PART_OFFSET 0x680000 +/* Size of jffs2 partition */ +#define CONFIG_JFFS2_PART_SIZE 0xf980000 + +/* + * USB + */ +#ifdef CONFIG_USB_OMAP3 + +#ifdef CONFIG_MUSB_HCD +#define CONFIG_CMD_USB + +#define CONFIG_USB_STORAGE +#define CONGIG_CMD_STORAGE +#define CONFIG_CMD_FAT + +#ifdef CONFIG_USB_KEYBOARD +#define CONFIG_SYS_USB_EVENT_POLL +#define CONFIG_PREBOOT "usb start" +#endif /* CONFIG_USB_KEYBOARD */ + +#endif /* CONFIG_MUSB_HCD */ + +#ifdef CONFIG_MUSB_UDC +/* USB device configuration */ +#define CONFIG_USB_DEVICE +#define CONFIG_USB_TTY +#define CONFIG_SYS_CONSOLE_IS_IN_ENV + +/* Change these to suit your needs */ +#define CONFIG_USBD_VENDORID 0x0451 +#define CONFIG_USBD_PRODUCTID 0x5678 +#define CONFIG_USBD_MANUFACTURER "Texas Instruments" +#define CONFIG_USBD_PRODUCT_NAME "EVM" +#endif /* CONFIG_MUSB_UDC */ + +#endif /* CONFIG_USB_OMAP3 */ + +/* ---------------------------------------------------------------------------- + * U-boot features + * ---------------------------------------------------------------------------- + */ +#define CONFIG_SYS_PROMPT "OMAP3_EVM # " +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#define CONFIG_SYS_MAXARGS 16 /* max args for a command */ + +#define CONFIG_MISC_INIT_R + +#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG +#define CONFIG_REVISION_TAG + +/* Size of Console IO buffer */ +#define CONFIG_SYS_CBSIZE 512 + +/* Size of print buffer */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) + +/* Size of bootarg buffer */ +#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) + +#define CONFIG_BOOTFILE "uImage" + +/* + * NAND / OneNAND + */ +#if defined(CONFIG_CMD_NAND) +#define CONFIG_SYS_FLASH_BASE PISMO1_NAND_BASE + +#define CONFIG_NAND_OMAP_GPMC +#define GPMC_NAND_ECC_LP_x16_LAYOUT +#define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET +#elif defined(CONFIG_CMD_ONENAND) +#define CONFIG_SYS_FLASH_BASE PISMO1_ONEN_BASE +#define CONFIG_SYS_ONENAND_BASE ONENAND_MAP +#endif + +#if !defined(CONFIG_ENV_IS_NOWHERE) +#if defined(CONFIG_CMD_NAND) +#define CONFIG_ENV_IS_IN_NAND +#elif defined(CONFIG_CMD_ONENAND) +#define CONFIG_ENV_IS_IN_ONENAND +#define CONFIG_ENV_OFFSET ONENAND_ENV_OFFSET +#endif +#endif /* CONFIG_ENV_IS_NOWHERE */ + +#define CONFIG_ENV_ADDR CONFIG_ENV_OFFSET + +#if defined(CONFIG_CMD_NET) + +/* Ethernet (SMSC9115 from SMSC9118 family) */ +#define CONFIG_NET_MULTI +#define CONFIG_SMC911X +#define CONFIG_SMC911X_32_BIT +#define CONFIG_SMC911X_BASE 0x2C000000 + +/* BOOTP fields */ +#define CONFIG_BOOTP_SUBNETMASK 0x00000001 +#define CONFIG_BOOTP_GATEWAY 0x00000002 +#define CONFIG_BOOTP_HOSTNAME 0x00000004 +#define CONFIG_BOOTP_BOOTPATH 0x00000010 + +#endif /* CONFIG_CMD_NET */ + +/* Support for relocation */ +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 +#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800 +#define CONFIG_SYS_INIT_RAM_SIZE 0x800 +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_SIZE - \ + GENERATED_GBL_DATA_SIZE) + +/* ----------------------------------------------------------------------------- + * Board specific + * ----------------------------------------------------------------------------- + */ +#define CONFIG_SYS_NO_FLASH + +/* Uncomment to define the board revision statically */ +/* #define CONFIG_STATIC_BOARD_REV OMAP3EVM_BOARD_GEN_2 */ + +#endif /* __OMAP3_EVM_COMMON_H */ diff --git a/include/configs/omap3_evm_quick_mmc.h b/include/configs/omap3_evm_quick_mmc.h new file mode 100644 index 0000000..691e4c2 --- /dev/null +++ b/include/configs/omap3_evm_quick_mmc.h @@ -0,0 +1,91 @@ +/* + * Configuration settings for quick boot from MMC on OMAP3 EVM. + * + * Copyright (C) 2006-2010 Texas Instruments Incorporated - http://www.ti.com/ + * + * Author : + * Sanjeev Premi <premi@ti.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __OMAP3_EVM_QUICK_MMC_H +#define __OMAP3_EVM_QUICK_MMC_H + +#include <asm/arch/cpu.h> +#include <asm/arch/omap3.h> + +/* ---------------------------------------------------------------------------- + * Supported U-boot commands + * ---------------------------------------------------------------------------- + */ +#define CONFIG_CMD_MMC +#define CONFIG_CMD_FAT + +/* + * Board revision is detected by probing the Ethernet chip. + * + * When revision is statically configured via CONFIG_STATIC_BOARD_REV, + * this option can be removed. Generated binary is leaner by ~16Kbytes. + */ +#define CONFIG_CMD_NET + +/* ---------------------------------------------------------------------------- + * Supported U-boot features + * ---------------------------------------------------------------------------- + */ +#define CONFIG_SILENT_CONSOLE +#define CONFIG_ENV_IS_NOWHERE + +/* ---------------------------------------------------------------------------- + * Supported hardware + * ---------------------------------------------------------------------------- + */ + +/* MMC */ +#define CONFIG_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_OMAP_HSMMC +#define CONFIG_DOS_PARTITION + +/* ----------------------------------------------------------------------------- + * Include common board configuration + * ----------------------------------------------------------------------------- + */ +#include "omap3_evm_common.h" + +/* ----------------------------------------------------------------------------- + * Default environment + * ----------------------------------------------------------------------------- + */ +#define CONFIG_BOOTDELAY 0 + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "verify=no\0" \ + "silent=1" + +#define CONFIG_BOOTCOMMAND \ + "mmc rescan 0; " \ + "fatload mmc 0 0x82000000 uImage; " \ + "bootm 0x82000000;" + +/* + * Update the bootargs as necessary e.g. size of memory, partition and fstype + */ +#define CONFIG_BOOTARGS \ + "quiet " \ + "console=ttyO0,115200n8 " \ + "mem=128M " \ + "noinitrd " \ + "root=/dev/mmcblk0p2 rw " \ + "rootfstype=ext3 rootwait" + +#endif /* __OMAP3_EVM_QUICK_MMC_H */ diff --git a/include/configs/omap3_evm_quick_nand.h b/include/configs/omap3_evm_quick_nand.h new file mode 100644 index 0000000..2d18314 --- /dev/null +++ b/include/configs/omap3_evm_quick_nand.h @@ -0,0 +1,79 @@ +/* + * Configuration settings for quick boot from NAND on OMAP3 EVM. + * + * Copyright (C) 2006-2010 Texas Instruments Incorporated - http://www.ti.com/ + * + * Author : + * Sanjeev Premi <premi@ti.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __OMAP3_EVM_QUICK_NAND_H +#define __OMAP3_EVM_QUICK_NAND_H + +#include <asm/arch/cpu.h> +#include <asm/arch/omap3.h> + +/* ---------------------------------------------------------------------------- + * Supported U-boot commands + * ---------------------------------------------------------------------------- + */ +#define CONFIG_CMD_NAND + +/* + * Board revision is detected by probing the Ethernet chip. + * + * When revision is statically configured via CONFIG_STATIC_BOARD_REV, + * this option can be removed. Generated binary is leaner by ~16Kbytes. + */ +#define CONFIG_CMD_NET + +/* ---------------------------------------------------------------------------- + * Supported U-boot features + * ---------------------------------------------------------------------------- + */ +#define CONFIG_SILENT_CONSOLE +#define CONFIG_ENV_IS_NOWHERE + +/* ----------------------------------------------------------------------------- + * Include common board configuration + * ----------------------------------------------------------------------------- + */ +#include "omap3_evm_common.h" + +/* ----------------------------------------------------------------------------- + * Default environment + * ----------------------------------------------------------------------------- + */ +#define CONFIG_BOOTDELAY 0 + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "verify=no\0" \ + "silent=1" + +#define CONFIG_BOOTCOMMAND \ + "nandecc hw; " \ + "nand read.i 0x80000000 280000 300000; " \ + "bootm 0x80000000;" + +/* + * Update the bootargs as necessary e.g. size of memory, partition and fstype + */ +#define CONFIG_BOOTARGS \ + "quiet " \ + "console=ttyO0,115200n8 " \ + "mem=128M " \ + "noinitrd " \ + "root=/dev/mtdblock4 rw " \ + "rootfstype=jffs2 " + +#endif /* __OMAP3_EVM_QUICK_NAND_H */ diff --git a/include/configs/omap3_mvblx.h b/include/configs/omap3_mvblx.h new file mode 100644 index 0000000..a0252a2 --- /dev/null +++ b/include/configs/omap3_mvblx.h @@ -0,0 +1,313 @@ +/* + * MATRIX VISION GmbH mvBlueLYNX-X + * + * Derived from omap3_beagle.h: + * (C) Copyright 2006-2008 + * Texas Instruments. + * Richard Woodruff <r-woodruff2@ti.com> + * Syed Mohammed Khasim <x0khasim@ti.com> + * + * Configuration settings for the TI OMAP3530 Beagle board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + */ +#define CONFIG_ARMV7 1 /* This is an ARM V7 CPU core */ +#define CONFIG_OMAP 1 /* in a TI OMAP core */ +#define CONFIG_OMAP34XX 1 /* which is a 34XX */ +#define CONFIG_OMAP3430 1 /* which is in a 3430 */ +#define CONFIG_MVBLX 1 /* working with mvBlueLYNX-X */ +#define CONFIG_MACH_TYPE MACH_TYPE_MVBLX + +#define CONFIG_SDRC /* The chip has SDRC controller */ + +#include <asm/arch/cpu.h> /* get chip and board defs */ +#include <asm/arch/omap3.h> + +/* + * Display CPU and Board information + */ +#define CONFIG_DISPLAY_CPUINFO 1 +#define CONFIG_DISPLAY_BOARDINFO 1 + +/* Clock Defines */ +#define V_OSCK 26000000 /* Clock output from T2 */ +#define V_SCLK (V_OSCK >> 1) + +#undef CONFIG_USE_IRQ /* no support for IRQs */ +#define CONFIG_MISC_INIT_R + +#define CONFIG_OF_LIBFDT 1 + +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 +#define CONFIG_REVISION_TAG 1 +#define CONFIG_SERIAL_TAG 1 + +/* + * Size of malloc() pool + */ +#define CONFIG_ENV_SIZE (2 << 10) /* 2 KiB */ + /* Sector */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10)) + +/* + * Hardware drivers + */ + +/* + * NS16550 Configuration + */ +#define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */ + +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE (-4) +#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK + +/* + * select serial console configuration + */ +#define CONFIG_CONS_INDEX 3 +#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3 +#define CONFIG_SERIAL3 3 /* UART3 */ + +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ + 115200} +#define CONFIG_GENERIC_MMC 1 +#define CONFIG_MMC 1 +#define CONFIG_OMAP_HSMMC 1 +#define CONFIG_DOS_PARTITION 1 + +/* DDR - I use Micron DDR */ +#define CONFIG_OMAP3_MICRON_DDR 1 + +/* USB */ +#define CONFIG_MUSB_UDC 1 +#define CONFIG_USB_OMAP3 1 +#define CONFIG_TWL4030_USB 1 + +/* USB device configuration */ +#define CONFIG_USB_DEVICE 1 +#define CONFIG_USB_TTY 1 +#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1 +#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE 1 +#define CONFIG_SYS_CONSOLE_ENV_OVERWRITE 1 +#define CONFIG_USBD_VENDORID 0x164c +#define CONFIG_USBD_PRODUCTID_GSERIAL 0x0201 +#define CONFIG_USBD_PRODUCTID_CDCACM 0x0201 +#define CONFIG_USBD_MANUFACTURER "MATRIX VISION GmbH" +#define CONFIG_USBD_PRODUCT_NAME "mvBlueLYNX-X" + +/* no FLASH available */ +#define CONFIG_SYS_NO_FLASH + +/* commands to include */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_EXT2 /* EXT2 Support */ +#define CONFIG_CMD_FAT /* FAT support */ +#define CONFIG_CMD_I2C /* I2C serial bus support */ +#define CONFIG_CMD_MMC /* MMC support */ +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_IMI /* iminfo */ +#undef CONFIG_CMD_IMLS /* List all found images */ +#define CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */ +#define CONFIG_CMD_NFS /* NFS support */ +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_PING +#define CONFIG_CMD_FPGA + +#define CONFIG_HARD_I2C 1 +#define CONFIG_SYS_I2C_SPEED 100000 +#define CONFIG_SYS_I2C_SLAVE 0 +#define CONFIG_SYS_I2C_BUS 0 /* This isn't used anywhere ?? */ +#define CONFIG_SYS_I2C_BUS_SELECT 1 /* This isn't used anywhere ?? */ +#define CONFIG_DRIVER_OMAP34XX_I2C 1 +#define CONFIG_I2C_MULTI_BUS 1 + +/* + * TWL4030 + */ +#define CONFIG_TWL4030_POWER 1 + +/* Environment information */ +#undef CONFIG_ENV_OVERWRITE /* disallow overwriting serial# and ethaddr */ +#define CONFIG_BOOTDELAY 3 + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "loadaddr=0x82000000\0" \ + "usbtty=cdc_acm\0" \ + "console=ttyO2,115200n8\0" \ + "mpurate=600\0" \ + "vram=12M\0" \ + "dvimode=1024x768-24@60\0" \ + "defaultdisplay=dvi\0" \ + "fpgafilename=mvbluelynx_x.rbf\0" \ + "loadfpga=if fatload mmc ${mmcdev} ${loadaddr} ${fpgafilename}; then " \ + "fpga load 0 ${loadaddr} ${filesize}; " \ + "fi;\0" \ + "mmcdev=0\0" \ + "mmcroot=/dev/mmcblk0p2 rw\0" \ + "mmcrootfstype=ext3 rootwait\0" \ + "mmcargs=setenv bootargs console=${console} " \ + "mpurate=${mpurate} " \ + "vram=${vram} " \ + "omapfb.mode=dvi:${dvimode} " \ + "omapfb.debug=y " \ + "omapdss.def_disp=${defaultdisplay} " \ + "root=${mmcroot} " \ + "rootfstype=${mmcrootfstype} " \ + "${cmdline_suffix}\0" \ + "loadbootenv=fatload mmc ${mmcdev} ${loadaddr} uEnv.txt\0" \ + "importbootenv=echo Importing environment from mmc ...; " \ + "env import -t $loadaddr $filesize\0" \ + "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \ + "mmcboot=echo Booting from mmc ...; " \ + "run mmcargs; " \ + "bootm ${loadaddr}\0" \ + "mmcbootcmd= " \ + "echo Trying mmc${mmcdev}; " \ + "mmc dev ${mmcdev}; " \ + "if mmc rescan; then " \ + "setenv mmcroot /dev/mmcblk${mmcdev}p2 rw; " \ + "echo SD/MMC found on device ${mmcdev};" \ + "if run loadbootenv; then " \ + "echo Loading boot environment from mmc${mmcdev}; " \ + "run importbootenv; " \ + "fi;" \ + "run loadfpga; " \ + "if test -n $uenvcmd; then " \ + "echo Running uenvcmd ...;" \ + "run uenvcmd;" \ + "fi;" \ + "if run loaduimage; then " \ + "run mmcboot; " \ + "fi;" \ + "fi\0" + +#define CONFIG_BOOTCOMMAND \ + "setenv mmcdev 1;" \ + "run mmcbootcmd || " \ + "setenv mmcdev 0;" \ + "run mmcbootcmd" + + +#define CONFIG_AUTO_COMPLETE 1 +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#define CONFIG_SYS_PROMPT "mvblx # " +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +/* Boot Argument Buffer Size */ +#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) + +#define CONFIG_SYS_ALT_MEMTEST 1 /* alternative memtest with looping */ +#define CONFIG_SYS_MEMTEST_START (0x82000000) /* memtest works on */ +#define CONFIG_SYS_MEMTEST_END (0x9dffffff) /* end = 448 MB */ +#define CONFIG_SYS_MEMTEST_SCRATCH (0x81000000) /* dummy address */ + +/* default load address */ +#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) + +/* + * OMAP3 has 12 GP timers, they can be driven by the system clock + * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK). + * This rate is divided by a local divisor. + */ +#define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2) +#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ +#define CONFIG_SYS_HZ 1000 + +/*----------------------------------------------------------------------- + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */ +#ifdef CONFIG_USE_IRQ +#define CONFIG_STACKSIZE_IRQ (4 << 10) /* IRQ stack 4 KiB */ +#define CONFIG_STACKSIZE_FIQ (4 << 10) /* FIQ stack 4 KiB */ +#endif + +/*----------------------------------------------------------------------- + * Physical Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 +#define PHYS_SDRAM_1_SIZE (32 << 20) /* at least 32 MiB */ +#define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 + +/* SDRAM Bank Allocation method */ +#define SDRC_R_B_C 1 + +#define CONFIG_ENV_IS_NOWHERE 1 + +/*---------------------------------------------------------------------------- + * Network Subsystem (SMSC9211 Ethernet from SMSC9118 family) + *---------------------------------------------------------------------------- + */ +#if defined(CONFIG_CMD_NET) + #define CONFIG_NET_MULTI + #define CONFIG_SMC911X 1 + #define CONFIG_SMC911X_32_BIT + #define CONFIG_SMC911X_BASE 0x2C000000 +#endif /* (CONFIG_CMD_NET) */ + +#define CONFIG_FPGA_COUNT 1 +#define CONFIG_FPGA CONFIG_SYS_ALTERA_CYCLON2 +#define CONFIG_FPGA_ALTERA +#define CONFIG_FPGA_CYCLON2 +#define CONFIG_SYS_FPGA_PROG_FEEDBACK +#define CONFIG_SYS_FPGA_DONT_USE_CONF_DONE + +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* 0xA0>>1 */ +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 /* 2^4 = 16-byte pages */ +#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 +#define CONFIG_SYS_EEPROM_SIZE 256 /* Bytes */ +#define CONFIG_ID_EEPROM +#define CONFIG_SYS_EEPROM_BUS_NUM 2 + +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 +#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800 +#define CONFIG_SYS_INIT_RAM_SIZE 0x800 +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_SIZE - \ + GENERATED_GBL_DATA_SIZE) + +#define CONFIG_OMAP3_SPI + +#endif /* __CONFIG_H */ diff --git a/include/configs/origen.h b/include/configs/origen.h index 889d5fc..380ef4f 100644 --- a/include/configs/origen.h +++ b/include/configs/origen.h @@ -165,4 +165,7 @@ #define COPY_BL2_SIZE 0x80000 #define BL2_START_OFFSET ((CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)/512) #define BL2_SIZE_BLOC_COUNT (COPY_BL2_SIZE/512) + +/* Enable devicetree support */ +#define CONFIG_OF_LIBFDT #endif /* __CONFIG_H */ diff --git a/include/configs/otc570.h b/include/configs/otc570.h index e2c2eda..c068aa0 100644 --- a/include/configs/otc570.h +++ b/include/configs/otc570.h @@ -45,6 +45,13 @@ */ #define CONFIG_SYS_TEXT_BASE 0x20002000 +/* + * since a number of boards are not being listed in linux + * arch/arm/tools/mach-types any more, the mach-types have to be + * defined here + */ +#define MACH_TYPE_OTC570 2166 + /* ARM asynchronous clock */ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* 32.768 kHz crystal */ #define CONFIG_SYS_AT91_MAIN_CLOCK 16000000/* 16.0 MHz crystal */ diff --git a/include/configs/portl2.h b/include/configs/portl2.h index a8543a5..e436cfe 100644 --- a/include/configs/portl2.h +++ b/include/configs/portl2.h @@ -46,7 +46,11 @@ #define CONFIG_PORTL2 #define KM_IVM_BUS "pca9544a:70:9" /* I2C2 (Mux-Port 1)*/ -#define KM_ENV_BUS "pca9544a:70:a" /* I2C2 (Mux-Port 2)*/ +/* + * Note: This is only valid for HW > P1A if you got an outdated P1A + * use KM_ENV_BUS "pca9544a:70:a" + */ +#define KM_ENV_BUS "pca9544a:70:d" /* I2C2 (Mux-Port 5)*/ /* * portl2 has a fixed link to the XMPP backplane diff --git a/include/configs/qong.h b/include/configs/qong.h index c61a9b3..3346802 100644 --- a/include/configs/qong.h +++ b/include/configs/qong.h @@ -25,9 +25,9 @@ #include <asm/arch/imx-regs.h> /* High Level Configuration Options */ -#define CONFIG_ARM1136 1 /* This is an arm1136 CPU core */ -#define CONFIG_MX31 1 /* in a mx31 */ -#define CONFIG_QONG 1 +#define CONFIG_ARM1136 /* This is an arm1136 CPU core */ +#define CONFIG_MX31 /* in a mx31 */ +#define CONFIG_QONG #define CONFIG_MX31_HCLK_FREQ 26000000 /* 26MHz */ #define CONFIG_MX31_CLK32 32768 @@ -36,14 +36,14 @@ #define CONFIG_SYS_TEXT_BASE 0xa0000000 -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 +#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG /* * Size of malloc() pool */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 1024 * 1024) +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 1536 * 1024) /* * Hardware drivers @@ -58,7 +58,7 @@ #define CONFIG_MXC_SPI #define CONFIG_DEFAULT_SPI_BUS 1 #define CONFIG_DEFAULT_SPI_MODE (SPI_MODE_0 | SPI_CS_HIGH) -#define CONFIG_RTC_MC13783 +#define CONFIG_RTC_MC13XXX #define CONFIG_PMIC #define CONFIG_PMIC_SPI @@ -71,14 +71,14 @@ /* FPGA */ #define CONFIG_FPGA -#define CONFIG_QONG_FPGA 1 +#define CONFIG_QONG_FPGA #define CONFIG_FPGA_BASE (CS1_BASE) #define CONFIG_FPGA_LATTICE #define CONFIG_FPGA_COUNT 1 #ifdef CONFIG_QONG_FPGA /* Ethernet */ -#define CONFIG_DNET 1 +#define CONFIG_DNET #define CONFIG_DNET_BASE (CS1_BASE + QONG_FPGA_PERIPH_SIZE) /* Framebuffer and LCD */ @@ -92,6 +92,8 @@ #define CONFIG_SPLASH_SCREEN #define CONFIG_CMD_BMP #define CONFIG_BMP_16BPP +#define CONFIG_VIDEO_BMP_GZIP +#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (512 << 10) /* USB */ #define CONFIG_CMD_USB @@ -137,6 +139,7 @@ #define CONFIG_CMD_PING #define CONFIG_CMD_SETEXPR #define CONFIG_CMD_SPI +#define CONFIG_CMD_UNZIP #define CONFIG_BOARD_LATE_INIT @@ -206,13 +209,13 @@ #define CONFIG_SYS_HZ 1000 -#define CONFIG_CMDLINE_EDITING 1 -#define CONFIG_SYS_HUSH_PARSER 1 /* Use the HUSH parser */ +#define CONFIG_CMDLINE_EDITING +#define CONFIG_SYS_HUSH_PARSER /* Use the HUSH parser */ #ifdef CONFIG_SYS_HUSH_PARSER #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " #endif -#define CONFIG_MISC_INIT_R 1 +#define CONFIG_MISC_INIT_R /*----------------------------------------------------------------------- * Stack sizes * @@ -262,7 +265,7 @@ extern int qong_nand_rdy(void *chip); #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE #define CONFIG_SYS_MONITOR_LEN 0x40000 /* Reserve 256KiB */ -#define CONFIG_ENV_IS_IN_FLASH 1 +#define CONFIG_ENV_IS_IN_FLASH #define CONFIG_ENV_SECT_SIZE 0x20000 #define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x80000) @@ -275,13 +278,13 @@ extern int qong_nand_rdy(void *chip); * CFI FLASH driver setup */ /* Flash memory is CFI compliant */ -#define CONFIG_SYS_FLASH_CFI 1 +#define CONFIG_SYS_FLASH_CFI /* Use drivers/cfi_flash.c */ -#define CONFIG_FLASH_CFI_DRIVER 1 +#define CONFIG_FLASH_CFI_DRIVER /* Use buffered writes (~10x faster) */ -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* Use hardware sector protection */ -#define CONFIG_SYS_FLASH_PROTECTION 1 +#define CONFIG_SYS_FLASH_PROTECTION /* * Filesystem @@ -311,6 +314,6 @@ extern int qong_nand_rdy(void *chip); #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET) -#define CONFIG_BOARD_EARLY_INIT_F 1 +#define CONFIG_BOARD_EARLY_INIT_F #endif /* __CONFIG_H */ diff --git a/include/configs/s5p_goni.h b/include/configs/s5p_goni.h index a52b0a5..3434de7 100644 --- a/include/configs/s5p_goni.h +++ b/include/configs/s5p_goni.h @@ -220,6 +220,8 @@ #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR - 0x1000000) +#define CONFIG_SYS_CACHELINE_SIZE 64 + #define CONFIG_PMIC #define CONFIG_PMIC_I2C #define CONFIG_PMIC_MAX8998 diff --git a/include/configs/s5pc210_universal.h b/include/configs/s5pc210_universal.h index 4031016..cc14f97 100644 --- a/include/configs/s5pc210_universal.h +++ b/include/configs/s5pc210_universal.h @@ -243,4 +243,23 @@ #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_CACHELINE_SIZE 32 + +#include <asm/arch/gpio.h> +/* + * I2C Settings + */ +#define CONFIG_SOFT_I2C_GPIO_SCL s5pc210_gpio_part1_get_nr(b, 7) +#define CONFIG_SOFT_I2C_GPIO_SDA s5pc210_gpio_part1_get_nr(b, 6) + +#define CONFIG_SOFT_I2C +#define CONFIG_SOFT_I2C_READ_REPEATED_START +#define CONFIG_SYS_I2C_SPEED 50000 +#define CONFIG_I2C_MULTI_BUS +#define CONFIG_SYS_MAX_I2C_BUS 7 + +#define CONFIG_PMIC +#define CONFIG_PMIC_I2C +#define CONFIG_PMIC_MAX8998 + #endif /* __CONFIG_H */ diff --git a/include/configs/smdkv310.h b/include/configs/smdkv310.h index 59c9fdb..fc8bb06 100644 --- a/include/configs/smdkv310.h +++ b/include/configs/smdkv310.h @@ -37,6 +37,9 @@ #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO +/* Mach Type */ +#define CONFIG_MACH_TYPE MACH_TYPE_SMDKV310 + /* Keep L2 Cache Disabled */ #define CONFIG_L2_OFF 1 @@ -87,7 +90,10 @@ #define CONFIG_BOOTDELAY 3 #define CONFIG_ZERO_BOOTDELAY_CHECK -#define CONFIG_MMC_U_BOOT + +/* MMC SPL */ +#define CONFIG_SPL +#define COPY_BL2_FNPTR_ADDR 0x00002488 #define CONFIG_BOOTCOMMAND "fatload mmc 0 40007000 uImage; bootm 40007000" diff --git a/include/configs/tt01.h b/include/configs/tt01.h new file mode 100644 index 0000000..6ef25cd --- /dev/null +++ b/include/configs/tt01.h @@ -0,0 +1,254 @@ +/* + * (C) Copyright 2011 HALE electronic <helmut.raiger@hale.at> + * (C) Copyright 2008 Magnus Lilja <lilja.magnus@gmail.com> + * + * Configuration settings for the HALE TT-01 board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include <asm/arch/imx-regs.h> + +/* High Level Configuration Options */ +#define CONFIG_ARM1136 +#define CONFIG_MX31 +#define CONFIG_MX31_HCLK_FREQ 26000000 +#define CONFIG_MX31_CLK32 32768 + +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DISPLAY_BOARDINFO + +#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG + +#define CONFIG_MACH_TYPE 3726 /* not yet in mach-types.h */ +#define CONFIG_SYS_TEXT_BASE 0xA0000000 + + +/* + * Physical Memory Map: + * CS settings are defined by i.MX31: + * - CSD0 and CDS1 are 256MB each, starting at 0x80000000 and 0x9000000 + * - CS0 and CS1 are 128MB each, at A0000000 and A8000000 + * - CS2 to CS5 are 32MB each, at B0.., B2.., B4.., B6.. + * + * HALE set-up of the bluetechnix board for now is: + * - 128MB DDR (2x64MB, 2x16bit), connected to 32bit DDR ram interface + * - NOR-Flash (Spansion 32MB MCP, Flash+16MB PSRAM), 16bit interface at CS0 + * - S71WS256ND0BFWYM (and CS1 for 64MB S71WS512ND0 without PSRAM) + * the flash chip is a mirrorbit S29WS256N ! + * - the PSRAM is hooked to CS5 (0xB6000000) + * - Intel Strata Flash PF48F2000P0ZB00, 16bit interface at (CS0 or) CS1 + * - 64Mbit = 8MByte (will go away in the production set-up) + * - NAND-Flash NAND01GR3B2BZA6 at NAND-FC: + * 1Gbit=128MB, 2048+64 bytes/page, 64pages x 1024 blocks + * - Ethernet controller SMC9118 at CS4 via FPGA, 16bit interface + * + * u-boot will support the 32MB nor flash and the 128MB NAND flash, the PSRAM + * is not used right now. We should be able to reduce the SOM to NAND flash + * only and boot from there. + */ +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM_1 CSD0_BASE +#define PHYS_SDRAM_1_SIZE (128 * 1024 * 1024) + +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_BOARD_LATE_INIT + +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 +#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE +#define CONFIG_SYS_GBL_DATA_OFFSET \ + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET) + +/* default load address, 1MB up the road */ +#define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1+0x100000) + +/* The stack sizes are set up in start.S using the settings below */ +#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ + +/* Size of malloc() pool, make sure possible frame buffer fits */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 10*1024*1024) + +/* memtest works on all but the last 1MB (u-boot) and malloc area */ +#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM_1 +#define CONFIG_SYS_MEMTEST_END \ + (PHYS_SDRAM_1+(PHYS_SDRAM_1_SIZE-CONFIG_SYS_MALLOC_LEN-0x100000)) + +/* CFI FLASH driver setup */ +#define CONFIG_SYS_FLASH_CFI /* Flash memory is CFI compliant */ +#define CONFIG_FLASH_CFI_DRIVER /* Use drivers/cfi_flash.c */ +#define CONFIG_FLASH_SPANSION_S29WS_N +/* + * TODO: Bluetechnix (the supplier of the SOM) did define these values + * in their original version of u-boot (1.2 or so). This should be + * reviewed. + * + * #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE + * #define CONFIG_SYS_FLASH_PROTECTION + */ +#define CONFIG_SYS_FLASH_BASE CS0_BASE +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CONFIG_SYS_MAX_FLASH_SECT (254+8) /* max number of sectors per chip */ + +/* + * FLASH and environment organization, only the Spansion chip is supported: + * - it has 254 * 128kB + 8 * 32kB blocks + * - this setup uses 4*32k+3*128k as monitor space = 0xA000 0000 to 0xA00F FFFF + * and 2 sectors with 128k as environment = + * A010 0000 to 0xA011 FFFF and 0xA012 0000 to 0xA013 FFFF + * - this could be less, but this is only for developer versions of the board + * and no-one is going to use the NOR flash anyway. + * + * Monitor is at the beginning of the NOR-Flash, 1MB reserved. Again this is + * way to large, but it avoids ENV overwrite (when updating u-boot) in case + * size breaks the next boundary (as it has with 128k). + */ +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE +#define CONFIG_SYS_MONITOR_LEN (1024 * 1024) + +#define CONFIG_ENV_IS_IN_FLASH +#define CONFIG_ENV_SECT_SIZE (128 * 1024) +#define CONFIG_ENV_SIZE (8 * 1024) /* smaller for faster access */ + +/* Address and size of Redundant Environment Sector */ +#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) +#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE + +#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) + +/* Hardware drivers */ + +/* + * on TT-01 UART1 pins are used by Audio, so we use UART2 + * TT-01 implements a hardware that turns off components depending on + * the power level. In PL=1 the RS232 transceiver is usually off, + * make sure that the transceiver is enabled during PL=1 for testing! + */ +#define CONFIG_MXC_UART +#define CONFIG_SYS_MX31_UART2 + +#define CONFIG_MXC_SPI +#define CONFIG_MXC_GPIO + +/* MC13783 connected to CSPI3 and SS0 */ +#define CONFIG_PMIC +#define CONFIG_PMIC_SPI +#define CONFIG_PMIC_FSL + +#define CONFIG_FSL_PMIC_BUS 2 +#define CONFIG_FSL_PMIC_CS 0 +#define CONFIG_FSL_PMIC_CLK 1000000 +#define CONFIG_FSL_PMIC_MODE (SPI_MODE_0 | SPI_CS_HIGH) +#define CONFIG_FSL_PMIC_BITLEN 32 + +#define CONFIG_RTC_MC13XXX + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE +/* console is UART2 on TT-01 */ +#define CONFIG_CONS_INDEX 1 +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200} + +/* ethernet setup for the onboard smc9118 */ +#define CONFIG_MII +#define CONFIG_SMC911X +/* 16 bit, onboard ethernet, decoded via MACH-MX0 FPGA at 0x84200000 */ +#define CONFIG_SMC911X_BASE (CS4_BASE+0x200000) +#define CONFIG_SMC911X_16_BIT + +/* + * Command definition + */ + +#include <config_cmd_default.h> + +#define CONFIG_CMD_DATE +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_SAVEENV +#define CONFIG_CMD_NAND +/* + * #define CONFIG_CMD_NAND_LOCK_UNLOCK the NAND01... chip does not support + * the NAND_CMD_LOCK_STATUS command, however the NFC of i.MX31 supports + * a software locking scheme. + */ + +#define CONFIG_BOOTDELAY 3 + +/* + * currently a default setting for booting via script is implemented + * set user to login name and serverip to tftp host, define your + * boot behaviour in bootscript.loginname + */ +#define CONFIG_EXTRA_ENV_SETTINGS \ + "bootcmd=dhcp bootscript.$(user); source\0" + +#define CONFIG_BOOTP_SERVERIP /* tftp serverip not overruled by dhcp server */ +#define CONFIG_BOOTP_SEND_HOSTNAME /* if env-var 'hostname' is set, send it */ + +/* Miscellaneous configurable options */ +#define CONFIG_HUSH_PARSER +#define CONFIG_PROMPT_HUSH_PS2 "> " + +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_PROMPT "TT01> " +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT)+16) +/* max number of command args */ +#define CONFIG_SYS_MAXARGS 16 +/* Boot Argument Buffer Size */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE + +#define CONFIG_SYS_HZ 1000 + +#define CONFIG_CMDLINE_EDITING + +#define CONFIG_NAND_MXC +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_MAX_CHIPS 1 + +/* + * actually this is nothing someone wants to configure! + * CONFIG_SYS_NAND_BASE despite being passed to board_nand_init() + * is not used by the driver. + */ +#define CONFIG_MXC_NAND_REGS_BASE NFC_BASE_ADDR +#define CONFIG_SYS_NAND_BASE NFC_BASE_ADDR +#define CONFIG_MXC_NAND_HWECC + +/* the current u-boot driver does not use the nand flash setup! */ +#define CONFIG_SYS_NAND_LARGEPAGE +/* + * it's not 16 bit: + * #define CONFIG_SYS_NAND_BUSWIDTH_16BIT + * the current u-boot mxc_nand.c tries to auto-detect, but this only + * reads the boot settings during reset (which might be wrong) + */ + +#endif /* __CONFIG_H */ diff --git a/include/configs/tx25.h b/include/configs/tx25.h index 8cb57ff..f77c546 100644 --- a/include/configs/tx25.h +++ b/include/configs/tx25.h @@ -34,6 +34,12 @@ /* NAND BOOT is the only boot method */ #define CONFIG_NAND_U_BOOT +#ifndef MACH_TYPE_TX25 +#define MACH_TYPE_TX25 2177 +#endif + +#define CONFIG_MACH_TYPE MACH_TYPE_TX25 + #ifdef CONFIG_NAND_SPL /* Start copying real U-boot from the second page */ #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x800 diff --git a/include/configs/vision2.h b/include/configs/vision2.h index bee9e97..f321ad2 100644 --- a/include/configs/vision2.h +++ b/include/configs/vision2.h @@ -36,11 +36,13 @@ #define CONFIG_DISPLAY_BOARDINFO #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ -#define CONFIG_REVISION_TAG #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_INITRD_TAG #define CONFIG_BOARD_LATE_INIT +#ifndef MACH_TYPE_TTC_VISION2 +#define MACH_TYPE_TTC_VISION2 2775 +#endif #define CONFIG_MACH_TYPE MACH_TYPE_TTC_VISION2 /* @@ -95,7 +97,7 @@ #define CONFIG_FSL_PMIC_CLK 2500000 #define CONFIG_FSL_PMIC_MODE SPI_MODE_0 #define CONFIG_FSL_PMIC_BITLEN 32 -#define CONFIG_RTC_MC13783 +#define CONFIG_RTC_MC13XXX /* * MMC Configs diff --git a/mmc_spl/board/samsung/smdkv310/Makefile b/mmc_spl/board/samsung/smdkv310/Makefile deleted file mode 100644 index 85f4838..0000000 --- a/mmc_spl/board/samsung/smdkv310/Makefile +++ /dev/null @@ -1,106 +0,0 @@ -# -# (C) Copyright 2006-2007 -# Stefan Roese, DENX Software Engineering, sr@denx.de. -# -# (C) Copyright 2008 -# Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de> -# -# (C) Copyright 2011 -# Chander Kashyap, Samsung Electronics, <k.chander@samsung.com> -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -CONFIG_MMC_SPL = y - -include $(TOPDIR)/config.mk - -LDSCRIPT= $(TOPDIR)/mmc_spl/board/$(BOARDDIR)/u-boot.lds -LDFLAGS = -Bstatic -T $(mmcobj)u-boot.lds -Ttext $(CONFIG_SYS_TEXT_BASE) $(PLATFORM_LDFLAGS) -AFLAGS += -DCONFIG_MMC_SPL -AFLAGS += -DCONFIG_SPL_BUILD -CFLAGS += -DCONFIG_MMC_SPL -CFLAGS += -DCONFIG_SPL_BUILD - -SOBJS = start.o mem_setup.o lowlevel_init.o -COBJS = mmc_boot.o - -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) -__OBJS := $(SOBJS) $(COBJS) -LNDIR := $(OBJTREE)/mmc_spl/board/$(BOARDDIR) - -mmcobj := $(OBJTREE)/mmc_spl/ - - -MKV310_MMC_SPL_EXEC = mkv310_mmc_spl_exec -MMC_SPL_BIN = u-boot-mmc-spl.bin - -ALL = $(mmcobj)u-boot-spl $(mmcobj)u-boot-spl.bin $(mmcobj)$(MMC_SPL_BIN) - -all: $(obj).depend $(ALL) - -$(mmcobj)$(MMC_SPL_BIN): $(mmcobj)u-boot-spl.bin tools/$(MKV310_MMC_SPL_EXEC) - ./tools/$(MKV310_MMC_SPL_EXEC) $(mmcobj)u-boot-spl.bin $(mmcobj)$(MMC_SPL_BIN) - rm -f tools/$(MKV310_MMC_SPL_EXEC) - -tools/$(MKV310_MMC_SPL_EXEC): tools/mkv310_image.c - $(HOSTCC) tools/mkv310_image.c -o tools/$(MKV310_MMC_SPL_EXEC) - -$(mmcobj)u-boot-spl.bin: $(mmcobj)u-boot-spl - $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@ - -$(mmcobj)u-boot-spl: $(OBJS) $(mmcobj)u-boot.lds - cd $(LNDIR) && $(LD) $(LDFLAGS) $(__OBJS) \ - -Map $(mmcobj)u-boot-spl.map \ - -o $(mmcobj)u-boot-spl - -$(mmcobj)u-boot.lds: $(LDSCRIPT) - $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@ - -# create symbolic links for common files - -# from cpu directory -start.S: - @rm -f $@ - @ln -s $(TOPDIR)/arch/arm/cpu/armv7/start.S $@ - -# from board directory -mem_setup.S: - @rm -f $@ - @ln -s $(TOPDIR)/board/samsung/smdkv310/mem_setup.S $@ - -lowlevel_init.S: - @rm -f $@ - @ln -s $(TOPDIR)/board/samsung/smdkv310/lowlevel_init.S $@ - -######################################################################### - -$(obj)%.o: %.S - $(CC) $(AFLAGS) -c -o $@ $< - -$(obj)%.o: %.c - $(CC) $(CFLAGS) -c -o $@ $< - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### diff --git a/spl/Makefile b/spl/Makefile index ed1f770..c8317fa 100644 --- a/spl/Makefile +++ b/spl/Makefile @@ -55,6 +55,7 @@ LIBS-$(CONFIG_SPL_LIBGENERIC_SUPPORT) += lib/libgeneric.o LIBS-$(CONFIG_SPL_POWER_SUPPORT) += drivers/power/libpower.o LIBS-$(CONFIG_SPL_NAND_SUPPORT) += drivers/mtd/nand/libnand.o LIBS-$(CONFIG_SPL_DMA_SUPPORT) += drivers/dma/libdma.o +LIBS-$(CONFIG_SPL_POST_MEM_SUPPORT) += post/drivers/memory.o ifeq ($(SOC),omap3) LIBS-y += $(CPUDIR)/omap-common/libomap-common.o @@ -110,7 +111,7 @@ all: $(ALL-y) ifdef CONFIG_SAMSUNG $(obj)$(BOARD)-spl.bin: $(obj)u-boot-spl.bin - $(TOPDIR)/board/$(BOARDDIR)/tools/mk$(BOARD)spl.exe \ + $(OBJTREE)/tools/mk$(BOARD)spl \ $(obj)u-boot-spl.bin $(obj)$(BOARD)-spl.bin endif diff --git a/tools/ublimage.h b/tools/ublimage.h index 93ec8ee..e440625 100644 --- a/tools/ublimage.h +++ b/tools/ublimage.h @@ -66,7 +66,7 @@ enum ublimage_fld_types { #define UBL_IMAGE_SIZE (0x00003800u) /* one NAND block */ -#define UBL_BLOCK_SIZE 512 +#define UBL_BLOCK_SIZE 2048 /* from sprufg5a.pdf Table 109 */ struct ubl_header { |