Add support for multiple PHYs.

60 files changed, 909 insertions, 288 deletions

diff --git a/board/csb272/csb272.c b/board/csb272/csb272.c
index e847879..24c6f0d 100644
--- a/board/csb272/csb272.c
+++ b/board/csb272/csb272.c
@@ -164,10 +164,15 @@ long initdram (int board_type)
 int last_stage_init(void)
 {
 	/* initialize the PHY */
-	miiphy_reset(CONFIG_PHY_ADDR);
-	miiphy_write(CONFIG_PHY_ADDR, PHY_BMCR,
-			PHY_BMCR_AUTON | PHY_BMCR_RST_NEG);	/* AUTO neg */
-	miiphy_write(CONFIG_PHY_ADDR, PHY_FCSCR, 0x0d08);	/* LEDs     */
+	miiphy_reset("ppc_4xx_eth0", CONFIG_PHY_ADDR);
+
+	/* AUTO neg */
+	miiphy_write("ppc_4xx_eth0", CONFIG_PHY_ADDR, PHY_BMCR,
+			PHY_BMCR_AUTON | PHY_BMCR_RST_NEG);
+
+	/* LEDs     */
+	miiphy_write("ppc_4xx_eth0", CONFIG_PHY_ADDR, PHY_FCSCR, 0x0d08);
+
 
 	return 0; /* success */
 }
diff --git a/board/csb472/csb472.c b/board/csb472/csb472.c
index 83418da..833bbce 100644
--- a/board/csb472/csb472.c
+++ b/board/csb472/csb472.c
@@ -132,10 +132,14 @@ long initdram (int board_type)
 int last_stage_init(void)
 {
 	/* initialize the PHY */
-	miiphy_reset(CONFIG_PHY_ADDR);
-	miiphy_write(CONFIG_PHY_ADDR, PHY_BMCR,
-			PHY_BMCR_AUTON | PHY_BMCR_RST_NEG);	/* AUTO neg */
-	miiphy_write(CONFIG_PHY_ADDR, PHY_FCSCR, 0x0d08);	/* LEDs     */
+	miiphy_reset("ppc_4xx_eth0", CONFIG_PHY_ADDR);
+
+	/* AUTO neg */
+	miiphy_write("ppc_4xx_eth0", CONFIG_PHY_ADDR, PHY_BMCR,
+			PHY_BMCR_AUTON | PHY_BMCR_RST_NEG);
+
+	/* LEDs     */
+	miiphy_write("ppc_4xx_eth0", CONFIG_PHY_ADDR, PHY_FCSCR, 0x0d08);
 
 	return 0; /* success */
 }
diff --git a/board/esd/common/misc.c b/board/esd/common/misc.c
index cba8c92..48b4b7c 100644
--- a/board/esd/common/misc.c
+++ b/board/esd/common/misc.c
@@ -33,8 +33,8 @@ void lxt971_no_sleep(void)
 {
 	unsigned short reg;
 
-	miiphy_read(CONFIG_PHY_ADDR, 0x10, &reg);
+	miiphy_read("ppc_4xx_eth0", CONFIG_PHY_ADDR, 0x10, &reg);
 	reg &= ~0x0040;                  /* disable sleep mode */
-	miiphy_write(CONFIG_PHY_ADDR, 0x10, reg);
+	miiphy_write("ppc_4xx_eth0", CONFIG_PHY_ADDR, 0x10, reg);
 }
 #endif /* CONFIG_LXT971_NO_SLEEP */
diff --git a/board/evb64260/eth.c b/board/evb64260/eth.c
index a248cad..eafa48b 100644
--- a/board/evb64260/eth.c
+++ b/board/evb64260/eth.c
@@ -85,12 +85,17 @@ static const char ether_port_phy_addr[3]={0,1,2};
 static const char ether_port_phy_addr[3]={4,5,6};
 #endif
 
+/* MII PHY access routines are common for all i/f, use gal_ent0 */
+#define GT6426x_MII_DEVNAME	"gal_enet0"
+
+int gt6426x_miiphy_read(char *devname, unsigned char phy,
+		unsigned char reg, unsigned short *val);
 
 static inline unsigned short
 miiphy_read_ret(unsigned short phy, unsigned short reg)
 {
     unsigned short val;
-    miiphy_read(phy,reg,&val);
+    gt6426x_miiphy_read(GT6426x_MII_DEVNAME,phy,reg,&val);
     return val;
 }
 
@@ -339,8 +344,8 @@ gt6426x_eth_disable(void *v)
 MII utilities - write: write to an MII register via SMI
 ***************************************************************************/
 int
-miiphy_write(unsigned char phy, unsigned char reg,
-    unsigned short data)
+gt6426x_miiphy_write(char *devname, unsigned char phy,
+		unsigned char reg, unsigned short data)
 {
     unsigned int temp= (reg<<21) | (phy<<16) | data;
 
@@ -354,8 +359,8 @@ miiphy_write(unsigned char phy, unsigned char reg,
 MII utilities - read: read from an MII register via SMI
 ***************************************************************************/
 int
-miiphy_read(unsigned char phy, unsigned char reg,
-			unsigned short *val)
+gt6426x_miiphy_read(char *devname, unsigned char phy,
+		unsigned char reg, unsigned short *val)
 {
     unsigned int temp= (reg<<21) | (phy<<16) | 1<<26;
 
@@ -444,7 +449,7 @@ check_phy_state(struct eth_dev_s *p)
 		if ((psr & 0x3) != want) {
 			printf("MII: GT thinks %x, PHY thinks %x, restarting autoneg..\n",
 					psr & 0x3, want);
-			miiphy_write(ether_port_phy_addr[p->dev],0,
+			miiphy_write(GT6426x_MII_DEVNAME,ether_port_phy_addr[p->dev],0,
 					miiphy_read_ret(ether_port_phy_addr[p->dev],0) | (1<<9));
 			udelay(10000);	/* the EVB's GT takes a while to notice phy
 					   went down and up */
@@ -490,7 +495,7 @@ gt6426x_eth_probe(void *v, bd_t *bis)
 	   led 2: 0xc=link/rxact
 	   led 3: 0x2=rxact (N/C)
 	   strch: 0,2=30 ms, enable */
-	miiphy_write(ether_port_phy_addr[p->dev], 20, 0x1c22);
+	miiphy_write(GT6426x_MII_DEVNAME,ether_port_phy_addr[p->dev], 20, 0x1c22);
 
 	/* 2.7ns port rise time */
 	/*miiphy_write(ether_port_phy_addr[p->dev], 30, 0x0<<10); */
@@ -792,6 +797,11 @@ gt6426x_eth_initialize(bd_t *bis)
 
 
 		eth_register(dev);
+#if defined(CONFIG_MII) || (CONFIG_COMMANDS & CFG_CMD_MII)
+		miiphy_register(dev->name,
+				gt6426x_miiphy_read, gt6426x_miiphy_write);
+#endif
 	}
+
 }
 #endif /* CFG_CMD_NET && CONFIG_NET_MULTI */
diff --git a/board/funkwerk/vovpn-gw/m88e6060.c b/board/funkwerk/vovpn-gw/m88e6060.c
index e4ff3c3..03a03d0 100644
--- a/board/funkwerk/vovpn-gw/m88e6060.c
+++ b/board/funkwerk/vovpn-gw/m88e6060.c
@@ -160,12 +160,12 @@ m88e6060_initialize( int devAddr )
 
 	/*** reset all phys into powerdown ************************************/
 	for (i=0, err=0; i<M88X_PHY_CNT; i++) {
-		err += miiphy_read( devAddr+phyTab[i],M88X_PHY_CNTL,&val );
+		err += bb_miiphy_read(NULL, devAddr+phyTab[i],M88X_PHY_CNTL,&val );
 		/* keep SpeedLSB, Duplex */
 		val &= 0x2100;
 		/* set SWReset, AnegEn, PwrDwn, RestartAneg */
 		val |= 0x9a00;
-		err += miiphy_write( devAddr+phyTab[i],M88X_PHY_CNTL,val );
+		err += bb_miiphy_write(NULL, devAddr+phyTab[i],M88X_PHY_CNTL,val );
 	}
 	if (err) {
 		printf( "%s [ERR] reset phys\n",_f );
@@ -174,9 +174,9 @@ m88e6060_initialize( int devAddr )
 
 	/*** disable all ports ************************************************/
 	for (i=0, err=0; i<M88X_PRT_CNT; i++) {
-		err += miiphy_read( devAddr+prtTab[i],M88X_PRT_CNTL,&val );
+		err += bb_miiphy_read(NULL, devAddr+prtTab[i],M88X_PRT_CNTL,&val );
 		val &= 0xfffc;
-		err += miiphy_write( devAddr+prtTab[i],M88X_PRT_CNTL,val );
+		err += bb_miiphy_write(NULL, devAddr+prtTab[i],M88X_PRT_CNTL,val );
 	}
 	if (err) {
 		printf( "%s [ERR] disable ports\n",_f );
@@ -187,33 +187,33 @@ m88e6060_initialize( int devAddr )
 	/* set switch mac addr */
 #define ea eth_get_dev()->enetaddr
 	val = (ea[4] <<  8) | ea[5];
-	err = miiphy_write( devAddr+15,M88X_GLB_MAC45,val );
+	err = bb_miiphy_write(NULL, devAddr+15,M88X_GLB_MAC45,val );
 	val = (ea[2] <<  8) | ea[3];
-	err += miiphy_write( devAddr+15,M88X_GLB_MAC23,val );
+	err += bb_miiphy_write(NULL, devAddr+15,M88X_GLB_MAC23,val );
 	val = (ea[0] <<  8) | ea[1];
 #undef ea
 	val &= 0xfeff;		/* clear DiffAddr */
-	err += miiphy_write( devAddr+15,M88X_GLB_MAC01,val );
+	err += bb_miiphy_write(NULL, devAddr+15,M88X_GLB_MAC01,val );
 	if (err) {
 		printf( "%s [ERR] switch mac address register\n",_f );
 		return( -1 );
 	}
 
 	/* !DiscardExcessive, MaxFrameSize, CtrMode */
-	err = miiphy_read( devAddr+15,M88X_GLB_CNTL,&val );
+	err = bb_miiphy_read(NULL, devAddr+15,M88X_GLB_CNTL,&val );
 	val &= 0xd870;
 	val |= 0x0500;
-	err += miiphy_write( devAddr+15,M88X_GLB_CNTL,val );
+	err += bb_miiphy_write(NULL, devAddr+15,M88X_GLB_CNTL,val );
 	if (err) {
 		printf( "%s [ERR] switch global control register\n",_f );
 		return( -1 );
 	}
 
 	/* LernDis off, ATUSize 1024, AgeTime 5min */
-	err = miiphy_read( devAddr+15,M88X_ATU_CNTL,&val );
+	err = bb_miiphy_read(NULL, devAddr+15,M88X_ATU_CNTL,&val );
 	val &= 0x000f;
 	val |= 0x2130;
-	err += miiphy_write( devAddr+15,M88X_ATU_CNTL,val );
+	err += bb_miiphy_write(NULL, devAddr+15,M88X_ATU_CNTL,val );
 	if (err) {
 		printf( "%s [ERR] atu control register\n",_f );
 		return( -1 );
@@ -226,10 +226,10 @@ m88e6060_initialize( int devAddr )
 		}
 		while (p->reg != -1) {
 			err = 0;
-			err += miiphy_read( devAddr+prtTab[i],p->reg,&val );
+			err += bb_miiphy_read(NULL, devAddr+prtTab[i],p->reg,&val );
 			val &= p->msk;
 			val |= p->val;
-			err += miiphy_write( devAddr+prtTab[i],p->reg,val );
+			err += bb_miiphy_write(NULL, devAddr+prtTab[i],p->reg,val );
 			if (err) {
 				printf( "%s [ERR] config port %d register %d\n",_f,i,p->reg );
 				/* XXX what todo */
@@ -245,10 +245,10 @@ m88e6060_initialize( int devAddr )
 		}
 		while (p->reg != -1) {
 			err = 0;
-			err += miiphy_read( devAddr+phyTab[i],p->reg,&val );
+			err += bb_miiphy_read(NULL, devAddr+phyTab[i],p->reg,&val );
 			val &= p->msk;
 			val |= p->val;
-			err += miiphy_write( devAddr+phyTab[i],p->reg,val );
+			err += bb_miiphy_write(NULL, devAddr+phyTab[i],p->reg,val );
 			if (err) {
 				printf( "%s [ERR] config phy %d register %d\n",_f,i,p->reg );
 				/* XXX what todo */
diff --git a/board/funkwerk/vovpn-gw/vovpn-gw.c b/board/funkwerk/vovpn-gw/vovpn-gw.c
index 4acddef..97f81ee 100644
--- a/board/funkwerk/vovpn-gw/vovpn-gw.c
+++ b/board/funkwerk/vovpn-gw/vovpn-gw.c
@@ -198,7 +198,7 @@ void reset_phy (void)
 	iop->pdat |= 0x00080000;
 	for (i=0; i<100; i++) {
 		udelay(20000);
-		if (miiphy_read( CFG_PHY_ADDR,2,&val ) == 0) {
+		if (bb_miiphy_read("FCC1 ETHERNET", CFG_PHY_ADDR,2,&val ) == 0) {
 			break;
 		}
 	}
diff --git a/board/mpc8260ads/mpc8260ads.c b/board/mpc8260ads/mpc8260ads.c
index a1d0a08..374e979 100644
--- a/board/mpc8260ads/mpc8260ads.c
+++ b/board/mpc8260ads/mpc8260ads.c
@@ -238,8 +238,9 @@ void reset_phy (void)
 	 * Do not bypass Rx/Tx (de)scrambler (fix configuration error)
 	 * Enable autonegotiation.
 	 */
-	miiphy_write(CFG_PHY_ADDR, 16, 0x610);
-	miiphy_write(CFG_PHY_ADDR, PHY_BMCR, PHY_BMCR_AUTON | PHY_BMCR_RST_NEG);
+	bb_miiphy_write(NULL, CFG_PHY_ADDR, 16, 0x610);
+	bb_miiphy_write(NULL, CFG_PHY_ADDR, PHY_BMCR,
+			PHY_BMCR_AUTON | PHY_BMCR_RST_NEG);
 #else
 	/*
 	 * Ethernet PHY is configured (by means of configuration pins)
@@ -247,9 +248,15 @@ void reset_phy (void)
 	 * to advertise all capabilities, including 100Mb/s, and
 	 * restart autonegotiation.
 	 */
-	miiphy_write(CFG_PHY_ADDR, PHY_ANAR, 0x01E1); /* Advertise all capabilities */
-	miiphy_write(CFG_PHY_ADDR, PHY_DCR,  0x0000); /* Do not bypass Rx/Tx (de)scrambler */
-	miiphy_write(CFG_PHY_ADDR, PHY_BMCR, PHY_BMCR_AUTON | PHY_BMCR_RST_NEG);
+
+	/* Advertise all capabilities */
+	bb_miiphy_write(NULL, CFG_PHY_ADDR, PHY_ANAR, 0x01E1);
+	
+	/* Do not bypass Rx/Tx (de)scrambler */
+	bb_miiphy_write(NULL, CFG_PHY_ADDR, PHY_DCR,  0x0000);
+
+	bb_miiphy_write(NULL, CFG_PHY_ADDR, PHY_BMCR,
+			PHY_BMCR_AUTON | PHY_BMCR_RST_NEG);
 #endif /* CONFIG_ADSTYPE == CFG_PQ2FADS */
 #endif /* CONFIG_MII */
 }
diff --git a/board/mpc8560ads/mpc8560ads.c b/board/mpc8560ads/mpc8560ads.c
index 9accc5c..25f69a0 100644
--- a/board/mpc8560ads/mpc8560ads.c
+++ b/board/mpc8560ads/mpc8560ads.c
@@ -237,9 +237,14 @@ void reset_phy (void)
 	udelay(1000);
 #endif
 #if defined(CONFIG_MII) && defined(CONFIG_ETHER_ON_FCC)
-	miiphy_reset(0x0);	/* reset PHY */
-	miiphy_write(0, PHY_MIPSCR, 0xf028); /* change PHY address to 0x02 */
-	miiphy_write(0x02, PHY_BMCR, PHY_BMCR_AUTON | PHY_BMCR_RST_NEG);
+	/* reset PHY */
+	miiphy_reset("FCC1 ETHERNET", 0x0);
+
+	/* change PHY address to 0x02 */
+	bb_miiphy_write(NULL, 0, PHY_MIPSCR, 0xf028);
+
+	bb_miiphy_write(NULL, 0x02, PHY_BMCR,
+			PHY_BMCR_AUTON | PHY_BMCR_RST_NEG);
 #endif /* CONFIG_MII */
 }
 
diff --git a/board/mpl/mip405/mip405.c b/board/mpl/mip405/mip405.c
index 84d3e1e..9c469b0 100644
--- a/board/mpl/mip405/mip405.c
+++ b/board/mpl/mip405/mip405.c
@@ -731,12 +731,12 @@ int last_stage_init (void)
 	char *s;
 	mem_test_reloc();
 	/* write correct LED configuration */
-	if (miiphy_write (0x1, 0x14, 0x2402) != 0) {
+	if (miiphy_write("ppc_4xx_eth0", 0x1, 0x14, 0x2402) != 0) {
 		printf ("Error writing to the PHY\n");
 	}
 	/* since LED/CFG2 is not connected on the -2,
 	 * write to correct capability information */
-	if (miiphy_write (0x1, 0x4, 0x01E1) != 0) {
+	if (miiphy_write("ppc_4xx_eth0", 0x1, 0x4, 0x01E1) != 0) {
 		printf ("Error writing to the PHY\n");
 	}
 	print_mip405_rev ();
diff --git a/board/netphone/netphone.c b/board/netphone/netphone.c
index 698115a..dd03e4b 100644
--- a/board/netphone/netphone.c
+++ b/board/netphone/netphone.c
@@ -38,6 +38,11 @@
 #include <watchdog.h>
 #endif
 
+int fec8xx_miiphy_read(char *devname, unsigned char addr,
+		unsigned char  reg, unsigned short *value);
+int fec8xx_miiphy_write(char *devname, unsigned char  addr,
+		unsigned char  reg, unsigned short value);
+
 /****************************************************************/
 
 /* some sane bit macros */
@@ -483,12 +488,13 @@ void reset_phys(void)
 	mii_init();
 
 	for (phyno = 0; phyno < 32; ++phyno) {
-		miiphy_read(phyno, PHY_PHYIDR1, &v);
+		fec8xx_miiphy_read(NULL, phyno, PHY_PHYIDR1, &v);
 		if (v == 0xFFFF)
 			continue;
-		miiphy_write(phyno, PHY_BMCR, PHY_BMCR_POWD);
+		fec8xx_miiphy_write(NULL, phyno, PHY_BMCR, PHY_BMCR_POWD);
 		udelay(10000);
-		miiphy_write(phyno, PHY_BMCR, PHY_BMCR_RESET | PHY_BMCR_AUTON);
+		fec8xx_miiphy_write(NULL, phyno, PHY_BMCR,
+				PHY_BMCR_RESET | PHY_BMCR_AUTON);
 		udelay(10000);
 	}
 }
diff --git a/board/netta/netta.c b/board/netta/netta.c
index e7024e5..9194bfb 100644
--- a/board/netta/netta.c
+++ b/board/netta/netta.c
@@ -35,6 +35,11 @@
 #include <watchdog.h>
 #endif
 
+int fec8xx_miiphy_read(char *devname, unsigned char addr,
+		unsigned char  reg, unsigned short *value);
+int fec8xx_miiphy_write(char *devname, unsigned char  addr,
+		unsigned char  reg, unsigned short value);
+
 /****************************************************************/
 
 /* some sane bit macros */
@@ -431,12 +436,13 @@ void reset_phys(void)
 	mii_init();
 
 	for (phyno = 0; phyno < 32; ++phyno) {
-		miiphy_read(phyno, PHY_PHYIDR1, &v);
+		fec8xx_miiphy_read(NULL, phyno, PHY_PHYIDR1, &v);
 		if (v == 0xFFFF)
 			continue;
-		miiphy_write(phyno, PHY_BMCR, PHY_BMCR_POWD);
+		fec8xx_miiphy_write(NULL, phyno, PHY_BMCR, PHY_BMCR_POWD);
 		udelay(10000);
-		miiphy_write(phyno, PHY_BMCR, PHY_BMCR_RESET | PHY_BMCR_AUTON);
+		fec8xx_miiphy_write(NULL, phyno, PHY_BMCR,
+				PHY_BMCR_RESET | PHY_BMCR_AUTON);
 		udelay(10000);
 	}
 }
diff --git a/board/netta2/netta2.c b/board/netta2/netta2.c
index f4ce7a4..c9b4051 100644
--- a/board/netta2/netta2.c
+++ b/board/netta2/netta2.c
@@ -36,6 +36,11 @@
 #include <watchdog.h>
 #endif
 
+int fec8xx_miiphy_read(char *devname, unsigned char addr,
+		unsigned char  reg, unsigned short *value);
+int fec8xx_miiphy_write(char *devname, unsigned char  addr,
+		unsigned char  reg, unsigned short value);
+
 /****************************************************************/
 
 /* some sane bit macros */
@@ -481,12 +486,13 @@ void reset_phys(void)
 	mii_init();
 
 	for (phyno = 0; phyno < 32; ++phyno) {
-		miiphy_read(phyno, PHY_PHYIDR1, &v);
+		fec8xx_miiphy_read(NULL, phyno, PHY_PHYIDR1, &v);
 		if (v == 0xFFFF)
 			continue;
-		miiphy_write(phyno, PHY_BMCR, PHY_BMCR_POWD);
+		fec8xx_miiphy_write(NULL, phyno, PHY_BMCR, PHY_BMCR_POWD);
 		udelay(10000);
-		miiphy_write(phyno, PHY_BMCR, PHY_BMCR_RESET | PHY_BMCR_AUTON);
+		fec8xx_miiphy_write(NULL, phyno, PHY_BMCR,
+				PHY_BMCR_RESET | PHY_BMCR_AUTON);
 		udelay(10000);
 	}
 }
diff --git a/board/sbc8560/sbc8560.c b/board/sbc8560/sbc8560.c
index 7f7272d..e8b9929 100644
--- a/board/sbc8560/sbc8560.c
+++ b/board/sbc8560/sbc8560.c
@@ -223,9 +223,14 @@ void reset_phy (void)
 	udelay(1000);
 #endif
 #if defined(CONFIG_MII) && defined(CONFIG_ETHER_ON_FCC)
-	miiphy_reset(0x0);	/* reset PHY */
-	miiphy_write(0, PHY_MIPSCR, 0xf028); /* change PHY address to 0x02 */
-	miiphy_write(0x02, PHY_BMCR, PHY_BMCR_AUTON | PHY_BMCR_RST_NEG);
+	/* reset PHY */
+	miiphy_reset("FCC1 ETHERNET", 0x0);
+
+	/* change PHY address to 0x02 */
+	bb_miiphy_write(NULL, 0, PHY_MIPSCR, 0xf028);
+
+	bb_miiphy_write(NULL, 0x02, PHY_BMCR,
+			PHY_BMCR_AUTON | PHY_BMCR_RST_NEG);
 #endif /* CONFIG_MII */
 }
 
diff --git a/board/stxgp3/stxgp3.c b/board/stxgp3/stxgp3.c
index 1dd9b2f..2b3949c 100644
--- a/board/stxgp3/stxgp3.c
+++ b/board/stxgp3/stxgp3.c
@@ -239,9 +239,14 @@ reset_phy(void)
 	udelay(1000);
 #endif
 #if defined(CONFIG_MII) && defined(CONFIG_ETHER_ON_FCC)
-	miiphy_reset(0x0);	/* reset PHY */
-	miiphy_write(0, PHY_MIPSCR, 0xf028); /* change PHY address to 0x02 */
-	miiphy_write(0x02, PHY_BMCR, PHY_BMCR_AUTON | PHY_BMCR_RST_NEG);
+	/* reset PHY */
+	miiphy_reset("FCC1 ETHERNET", 0x0);
+
+	/* change PHY address to 0x02 */
+	bb_miiphy_write(NULL, 0, PHY_MIPSCR, 0xf028);
+
+	bb_miiphy_write(NULL, 0x02, PHY_BMCR,
+			PHY_BMCR_AUTON | PHY_BMCR_RST_NEG);
 #endif /* CONFIG_MII */
 #endif
 }
diff --git a/board/stxxtc/stxxtc.c b/board/stxxtc/stxxtc.c
index b38b4be..aa3d129 100644
--- a/board/stxxtc/stxxtc.c
+++ b/board/stxxtc/stxxtc.c
@@ -481,12 +481,12 @@ void reset_phys(void)
 	mii_init();
 
 	for (phyno = 0; phyno < 32; ++phyno) {
-		miiphy_read(phyno, PHY_PHYIDR1, &v);
+		miiphy_read("FEC ETHERNET", phyno, PHY_PHYIDR1, &v);
 		if (v == 0xFFFF)
 			continue;
-		miiphy_write(phyno, PHY_BMCR, PHY_BMCR_POWD);
+		miiphy_write("FEC ETHERNET", phyno, PHY_BMCR, PHY_BMCR_POWD);
 		udelay(10000);
-		miiphy_write(phyno, PHY_BMCR, PHY_BMCR_RESET | PHY_BMCR_AUTON);
+		miiphy_write("FEC ETHERNET", phyno, PHY_BMCR, PHY_BMCR_RESET | PHY_BMCR_AUTON);
 		udelay(10000);
 	}
 }
diff --git a/board/uc100/uc100.c b/board/uc100/uc100.c
index 1387b93..4f2cff6 100644
--- a/board/uc100/uc100.c
+++ b/board/uc100/uc100.c
@@ -30,6 +30,8 @@
 #include <i2c.h>
 #include <miiphy.h>
 
+int fec8xx_miiphy_write(char *devname, unsigned char  addr,
+		unsigned char  reg, unsigned short value);
 
 /*********************************************************************/
 /* UPMA Pre Initilization Table by WV (Miron MT48LC16M16A2-7E B)     */
@@ -258,8 +260,11 @@ int misc_init_r (void)
 	 */
 	mii_init();
 
-	miiphy_write(0, PHY_BMCR, 0x2100);    /* disable auto-negotiation, 100mbit, full-duplex */
-	miiphy_write(0, PHY_FCSCR, 0x4122);   /* set LED's to Link, Transmit, Receive           */
+	/* disable auto-negotiation, 100mbit, full-duplex */
+	fec8xx_miiphy_write(NULL, 0, PHY_BMCR, 0x2100);
+
+	/* set LED's to Link, Transmit, Receive           */
+	fec8xx_miiphy_write(NULL,  0, PHY_FCSCR, 0x4122);
 
 	return 0;
 }
diff --git a/common/cmd_mii.c b/common/cmd_mii.c
index f93232c..48a4e77 100644
--- a/common/cmd_mii.c
+++ b/common/cmd_mii.c
@@ -41,19 +41,21 @@ uint last_data;
 uint last_reg;
 
 /*
- * MII read/write
+ * MII device/info/read/write
  *
  * Syntax:
- *  mii read {addr} {reg}
- *  mii write {addr} {reg} {data}
+ *  mii device {devname}
+ *  mii info   {addr}
+ *  mii read   {addr} {reg}
+ *  mii write  {addr} {reg} {data}
  */
-
 int do_mii (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 {
 	char		op;
 	unsigned char	addr, reg;
 	unsigned short	data;
 	int		rcode = 0;
+	char		*devname;
 
 #if defined(CONFIG_8xx) || defined(CONFIG_MCF52x2)
 	mii_init ();
@@ -78,8 +80,11 @@ int do_mii (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 			data = simple_strtoul (argv[4], NULL, 16);
 	}
 
+	/* use current device */
+	devname = miiphy_get_current_dev();
+
 	/*
-	 * check info/read/write.
+	 * check device/read/write/list.
 	 */
 	if (op == 'i') {
 		unsigned char j, start, end;
@@ -91,34 +96,43 @@ int do_mii (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 		 * Look for any and all PHYs.  Valid addresses are 0..31.
 		 */
 		if (argc >= 3) {
-			start = addrlo; end = addrhi + 1;
+			start = addr; end = addr + 1;
 		} else {
-			start = 0; end = 32;
+			start = 0; end = 31;
 		}
 
 		for (j = start; j < end; j++) {
-			if (miiphy_info (j, &oui, &model, &rev) == 0) {
+			if (miiphy_info (devname, j, &oui, &model, &rev) == 0) {
 				printf ("PHY 0x%02X: "
 					"OUI = 0x%04X, "
 					"Model = 0x%02X, "
 					"Rev = 0x%02X, "
 					"%3dbaseT, %s\n",
 					j, oui, model, rev,
-					miiphy_speed (j),
-					miiphy_duplex (j) == FULL ? "FDX" : "HDX");
+					miiphy_speed (devname, j),
+					(miiphy_duplex (devname, j) == FULL)
+						? "FDX" : "HDX");
+			} else {
+				puts ("Error reading info from the PHY\n");
 			}
 		}
 	} else if (op == 'r') {
-		if (miiphy_read (addr, reg, &data) != 0) {
+		if (miiphy_read (devname, addr, reg, &data) != 0) {
 			puts ("Error reading from the PHY\n");
 			rcode = 1;
+		} else {
+			printf ("%04X\n", data & 0x0000FFFF);
 		}
-		printf ("%04X\n", data & 0x0000FFFF);
 	} else if (op == 'w') {
-		if (miiphy_write (addr, reg, data) != 0) {
+		if (miiphy_write (devname, addr, reg, data) != 0) {
 			puts ("Error writing to the PHY\n");
 			rcode = 1;
 		}
+	} else if (op == 'd') {
+		if (argc == 2)
+			miiphy_listdev ();
+		else
+			miiphy_set_current_dev (argv[2]);
 	} else {
 		printf ("Usage:\n%s\n", cmdtp->usage);
 		return 1;
@@ -140,9 +154,11 @@ int do_mii (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 U_BOOT_CMD(
 	mii,	5,	1,	do_mii,
 	"mii     - MII utility commands\n",
-	"info  <addr>              - display MII PHY info\n"
-	"mii read  <addr> <reg>        - read  MII PHY <addr> register <reg>\n"
-	"mii write <addr> <reg> <data> - write MII PHY <addr> register <reg>\n"
+	"device                     - list available devices\n"
+	"mii device <devname>           - set current device\n"
+	"mii info   <addr>              - display MII PHY info\n"
+	"mii read   <addr> <reg>        - read  MII PHY <addr> register <reg>\n"
+	"mii write  <addr> <reg> <data> - write MII PHY <addr> register <reg>\n"
 );
 
 #else /* ! CONFIG_TERSE_MII ================================================= */
@@ -386,7 +402,7 @@ static int special_field(
 	return 0;
 }
 
-uint last_op;
+char last_op[2];
 uint last_data;
 uint last_addr_lo;
 uint last_addr_hi;
@@ -412,11 +428,12 @@ static void extract_range(
 /* ---------------------------------------------------------------- */
 int do_mii (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 {
-	char		op;
+	char		op[2];
 	unsigned char	addrlo, addrhi, reglo, reghi;
 	unsigned char	addr, reg;
 	unsigned short	data;
 	int		rcode = 0;
+	char		*devname;
 
 #ifdef CONFIG_8xx
 	mii_init ();
@@ -426,7 +443,8 @@ int do_mii (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 	 * We use the last specified parameters, unless new ones are
 	 * entered.
 	 */
-	op     = last_op;
+	op[0] = last_op[0];
+	op[1] = last_op[1];
 	addrlo = last_addr_lo;
 	addrhi = last_addr_hi;
 	reglo  = last_reg_lo;
@@ -434,7 +452,12 @@ int do_mii (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 	data   = last_data;
 
 	if ((flag & CMD_FLAG_REPEAT) == 0) {
-		op = argv[1][0];
+		op[0] = argv[1][0];
+		if (strlen(argv[1]) > 1)
+			op[1] = argv[1][1];
+		else
+			op[1] = '\0';
+
 		if (argc >= 3)
 			extract_range(argv[2], &addrlo, &addrhi);
 		if (argc >= 4)
@@ -443,10 +466,13 @@ int do_mii (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 			data = simple_strtoul (argv[4], NULL, 16);
 	}
 
+	/* use current device */
+	devname = miiphy_get_current_dev();
+
 	/*
 	 * check info/read/write.
 	 */
-	if (op == 'i') {
+	if (op[0] == 'i') {
 		unsigned char j, start, end;
 		unsigned int oui;
 		unsigned char model;
@@ -462,22 +488,25 @@ int do_mii (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 		}
 
 		for (j = start; j <= end; j++) {
-			if (miiphy_info (j, &oui, &model, &rev) == 0) {
+			if (miiphy_info (devname, j, &oui, &model, &rev) == 0) {
 				printf("PHY 0x%02X: "
 					"OUI = 0x%04X, "
 					"Model = 0x%02X, "
 					"Rev = 0x%02X, "
 					"%3dbaseT, %s\n",
 					j, oui, model, rev,
-					miiphy_speed (j),
-					miiphy_duplex (j) == FULL ? "FDX" : "HDX");
+					miiphy_speed (devname, j),
+					(miiphy_duplex (devname, j) == FULL)
+						? "FDX" : "HDX");
+			} else {
+				puts ("Error reading info from the PHY\n");
 			}
 		}
-	} else if (op == 'r') {
+	} else if (op[0] == 'r') {
 		for (addr = addrlo; addr <= addrhi; addr++) {
 			for (reg = reglo; reg <= reghi; reg++) {
 				data = 0xffff;
-				if (miiphy_read (addr, reg, &data) != 0) {
+				if (miiphy_read (devname, addr, reg, &data) != 0) {
 					printf(
 					"Error reading from the PHY addr=%02x reg=%02x\n",
 						addr, reg);
@@ -492,17 +521,17 @@ int do_mii (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 			if ((addrlo != addrhi) && (reglo != reghi))
 				printf("\n");
 		}
-	} else if (op == 'w') {
+	} else if (op[0] == 'w') {
 		for (addr = addrlo; addr <= addrhi; addr++) {
 			for (reg = reglo; reg <= reghi; reg++) {
-				if (miiphy_write (addr, reg, data) != 0) {
+				if (miiphy_write (devname, addr, reg, data) != 0) {
 					printf("Error writing to the PHY addr=%02x reg=%02x\n",
 						addr, reg);
 					rcode = 1;
 				}
 			}
 		}
-	} else if (op == 'd') {
+	} else if (strncmp(op, "du", 2) == 0) {
 		ushort regs[6];
 		int ok = 1;
 		if ((reglo > 5) || (reghi > 5)) {
@@ -512,8 +541,8 @@ int do_mii (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 			return 1;
 		}
 		for (addr = addrlo; addr <= addrhi; addr++) {
-			for (reg = 0; reg < 6; reg++) {
-				if (miiphy_read(addr, reg, &regs[reg]) != 0) {
+			for (reg = reglo; reg < reghi + 1; reg++) {
+				if (miiphy_read(devname, addr, reg, &regs[reg]) != 0) {
 					ok = 0;
 					printf(
 					"Error reading from the PHY addr=%02x reg=%02x\n",
@@ -525,6 +554,11 @@ int do_mii (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 				MII_dump_0_to_5(regs, reglo, reghi);
 			printf("\n");
 		}
+	} else if (strncmp(op, "de", 2) == 0) {
+		if (argc == 2)
+			miiphy_listdev ();
+		else
+			miiphy_set_current_dev (argv[2]);
 	} else {
 		printf("Usage:\n%s\n", cmdtp->usage);
 		return 1;
@@ -533,7 +567,8 @@ int do_mii (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 	/*
 	 * Save the parameters for repeats.
 	 */
-	last_op      = op;
+	last_op[0] = op[0];
+	last_op[1] = op[1];
 	last_addr_lo = addrlo;
 	last_addr_hi = addrhi;
 	last_reg_lo  = reglo;
@@ -548,10 +583,12 @@ int do_mii (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 U_BOOT_CMD(
 	mii,	5,	1,	do_mii,
 	"mii     - MII utility commands\n",
-	"info  <addr>              - display MII PHY info\n"
-	"mii read  <addr> <reg>        - read  MII PHY <addr> register <reg>\n"
-	"mii write <addr> <reg> <data> - write MII PHY <addr> register <reg>\n"
-	"mii dump  <addr> <reg>        - pretty-print <addr> <reg> (0-5 only)\n"
+	"device                     - list available devices\n"
+	"mii device <devname>           - set current device\n"
+	"mii info   <addr>              - display MII PHY info\n"
+	"mii read   <addr> <reg>        - read  MII PHY <addr> register <reg>\n"
+	"mii write  <addr> <reg> <data> - write MII PHY <addr> register <reg>\n"
+	"mii dump   <addr> <reg>        - pretty-print <addr> <reg> (0-5 only)\n"
 	"Addr and/or reg may be ranges, e.g. 2-7.\n"
 );
 
diff --git a/common/miiphybb.c b/common/miiphybb.c
index b6af88f..adb697c 100644
--- a/common/miiphybb.c
+++ b/common/miiphybb.c
@@ -121,7 +121,8 @@ static void miiphy_pre (char read, unsigned char addr, unsigned char reg)
  * Returns:
  *   0 on success
  */
-int miiphy_read (unsigned char addr, unsigned char reg, unsigned short *value)
+int bb_miiphy_read (char *devname, unsigned char addr,
+		unsigned char reg, unsigned short *value)
 {
 	short rdreg;		/* register working value */
 	int j;			/* counter */
@@ -188,7 +189,8 @@ int miiphy_read (unsigned char addr, unsigned char reg, unsigned short *value)
  * Returns:
  *   0 on success
  */
-int miiphy_write (unsigned char addr, unsigned char reg, unsigned short value)
+int bb_miiphy_write (char *devname, unsigned char addr,
+		unsigned char reg, unsigned short value)
 {
 	int j;			/* counter */
 #ifndef CONFIG_EP8248
diff --git a/common/miiphyutil.c b/common/miiphyutil.c
index 13b9c65..d67c8b5 100644
--- a/common/miiphyutil.c
+++ b/common/miiphyutil.c
@@ -30,6 +30,215 @@
 #include <miiphy.h>
 
 #if defined(CONFIG_MII) || (CONFIG_COMMANDS & CFG_CMD_MII)
+#include <asm/types.h>
+#include <linux/list.h>
+#include <malloc.h>
+#include <net.h>
+
+/* local debug macro */
+#define MII_DEBUG
+#undef MII_DEBUG
+
+#undef debug
+#ifdef MII_DEBUG
+#define debug(fmt,args...)	printf (fmt ,##args)
+#else
+#define debug(fmt,args...)
+#endif /* MII_DEBUG */
+
+struct mii_dev {
+	struct list_head link;
+	char *name;
+	int (* read)(char *devname, unsigned char addr,
+			unsigned char reg, unsigned short *value);
+	int (* write)(char *devname, unsigned char addr,
+			unsigned char reg, unsigned short value);
+};
+
+static struct list_head mii_devs;
+static struct mii_dev *current_mii;
+
+/*****************************************************************************
+ *
+ * Register read and write MII access routines for the device <name>.
+ */
+void miiphy_register(char *name,
+		int (* read)(char *devname, unsigned char addr,
+			unsigned char reg, unsigned short *value),
+		int (* write)(char *devname, unsigned char addr,
+			unsigned char reg, unsigned short value))
+{
+	struct list_head *entry;
+	struct mii_dev *new_dev;
+	struct mii_dev *miidev;
+	static int head_initialized = 0;
+	unsigned int name_len;
+
+	if (head_initialized == 0) {
+		INIT_LIST_HEAD(&mii_devs);
+		current_mii = NULL;
+		head_initialized = 1;
+	}
+
+	/* check if we have unique name */
+	list_for_each(entry, &mii_devs) {
+		miidev = list_entry(entry, struct mii_dev, link);
+		if (strcmp(miidev->name, name) == 0) {
+			printf("miiphy_register: non unique device name '%s'\n",
+					name);
+			return;
+		}
+	}
+
+	/* allocate memory */
+	name_len = strlen(name);
+	new_dev = (struct mii_dev *)malloc(sizeof(struct mii_dev) + name_len + 1);
+
+	if(new_dev == NULL) {
+		printf("miiphy_register: cannot allocate memory for '%s'\n",
+				name);
+		return;
+	}
+	memset(new_dev, 0, sizeof(struct mii_dev) + name_len);
+
+	/* initalize mii_dev struct fields */
+	INIT_LIST_HEAD(&new_dev->link);
+	new_dev->read = read;
+	new_dev->write = write;
+	new_dev->name = (char *)(new_dev + 1);
+	strncpy(new_dev->name, name, name_len);
+	new_dev->name[name_len] = '\0';
+
+	debug("miiphy_register: added '%s', read=0x%08lx, write=0x%08lx\n",
+			new_dev->name, new_dev->read, new_dev->write);
+
+	/* add it to the list */
+	list_add_tail(&new_dev->link, &mii_devs);
+
+	if (!current_mii)
+		current_mii = new_dev;
+}
+
+int miiphy_set_current_dev(char *devname)
+{
+	struct list_head *entry;
+	struct mii_dev *dev;
+
+	list_for_each(entry, &mii_devs) {
+		dev = list_entry(entry, struct mii_dev, link);
+
+		if (strcmp(devname, dev->name) == 0) {
+			current_mii = dev;
+			return 0;
+		}
+	}
+
+	printf("No such device: %s\n", devname);
+	return 1;
+}
+
+char *miiphy_get_current_dev()
+{
+	if (current_mii)
+		return current_mii->name;
+
+	return NULL;
+}
+
+/*****************************************************************************
+ *
+ * Read to variable <value> from the PHY attached to device <devname>,
+ * use PHY address <addr> and register <reg>.
+ *
+ * Returns:
+ *   0 on success
+ */
+int miiphy_read(char *devname, unsigned char addr, unsigned char reg,
+		unsigned short *value)
+{
+	struct list_head *entry;
+	struct mii_dev *dev;
+	int found_dev = 0;
+	int read_ret = 0;
+
+	if (!devname) {
+		printf("NULL device name!\n");
+		return 1;
+	}
+
+	list_for_each(entry, &mii_devs) {
+		dev = list_entry(entry, struct mii_dev, link);
+
+		if (strcmp(devname, dev->name) == 0) {
+			found_dev = 1;
+			read_ret = dev->read(devname, addr, reg, value);
+			break;
+		}
+	}
+
+	if (found_dev == 0)
+		printf("No such device: %s\n", devname);
+
+	return ((found_dev) ? read_ret : 1);
+}
+
+/*****************************************************************************
+ *
+ * Write <value> to the PHY attached to device <devname>,
+ * use PHY address <addr> and register <reg>.
+ *
+ * Returns:
+ *   0 on success
+ */
+int miiphy_write(char *devname, unsigned char addr, unsigned char reg,
+		unsigned short value)
+{
+	struct list_head *entry;
+	struct mii_dev *dev;
+	int found_dev = 0;
+	int write_ret = 0;
+
+	if (!devname) {
+		printf("NULL device name!\n");
+		return 1;
+	}
+
+	list_for_each(entry, &mii_devs) {
+		dev = list_entry(entry, struct mii_dev, link);
+
+		if (strcmp(devname, dev->name) == 0) {
+			found_dev = 1;
+			write_ret = dev->write(devname, addr, reg, value);
+			break;
+		}
+	}
+
+	if (found_dev == 0)
+		printf("No such device: %s\n", devname);
+
+	return ((found_dev) ? write_ret : 1);
+}
+
+/*****************************************************************************
+ *
+ * Print out list of registered MII capable devices.
+ */
+void miiphy_listdev(void)
+{
+	struct list_head *entry;
+	struct mii_dev *dev;
+
+	puts("MII devices: ");
+	list_for_each(entry, &mii_devs) {
+		dev = list_entry(entry, struct mii_dev, link);
+		printf("'%s' ", dev->name);
+	}
+	puts("\n");
+
+	if (current_mii)
+		printf("Current device: '%s'\n", current_mii->name);
+}
+
 
 /*****************************************************************************
  *
@@ -42,14 +251,15 @@
  * Returns:
  *   0 on success
  */
-int miiphy_info (unsigned char addr,
+int miiphy_info (char *devname,
+		 unsigned char addr,
 		 unsigned int *oui,
 		 unsigned char *model, unsigned char *rev)
 {
 	unsigned int reg = 0;
 	unsigned short tmp;
 
-	if (miiphy_read (addr, PHY_PHYIDR2, &tmp) != 0) {
+	if (miiphy_read (devname, addr, PHY_PHYIDR2, &tmp) != 0) {
 #ifdef DEBUG
 		puts ("PHY ID register 2 read failed\n");
 #endif
@@ -65,7 +275,7 @@ int miiphy_info (unsigned char addr,
 		return (-1);
 	}
 
-	if (miiphy_read (addr, PHY_PHYIDR1, &tmp) != 0) {
+	if (miiphy_read (devname, addr, PHY_PHYIDR1, &tmp) != 0) {
 #ifdef DEBUG
 		puts ("PHY ID register 1 read failed\n");
 #endif
@@ -88,18 +298,18 @@ int miiphy_info (unsigned char addr,
  * Returns:
  *   0 on success
  */
-int miiphy_reset (unsigned char addr)
+int miiphy_reset (char *devname, unsigned char addr)
 {
 	unsigned short reg;
 	int loop_cnt;
 
-	if (miiphy_read (addr, PHY_BMCR, &reg) != 0) {
+	if (miiphy_read (devname, addr, PHY_BMCR, &reg) != 0) {
 #ifdef DEBUG
 		printf ("PHY status read failed\n");
 #endif
 		return (-1);
 	}
-	if (miiphy_write (addr, PHY_BMCR, reg | 0x8000) != 0) {
+	if (miiphy_write (devname, addr, PHY_BMCR, reg | 0x8000) != 0) {
 #ifdef DEBUG
 		puts ("PHY reset failed\n");
 #endif
@@ -116,7 +326,7 @@ int miiphy_reset (unsigned char addr)
 	loop_cnt = 0;
 	reg = 0x8000;
 	while (((reg & 0x8000) != 0) && (loop_cnt++ < 1000000)) {
-		if (miiphy_read (addr, PHY_BMCR, &reg) != 0) {
+		if (miiphy_read (devname, addr, PHY_BMCR, &reg) != 0) {
 #     ifdef DEBUG
 			puts ("PHY status read failed\n");
 #     endif
@@ -137,12 +347,12 @@ int miiphy_reset (unsigned char addr)
  *
  * Determine the ethernet speed (10/100).
  */
-int miiphy_speed (unsigned char addr)
+int miiphy_speed (char *devname, unsigned char addr)
 {
 	unsigned short reg;
 
 #if defined(CONFIG_PHY_GIGE)
-	if (miiphy_read (addr, PHY_1000BTSR, &reg)) {
+	if (miiphy_read (devname, addr, PHY_1000BTSR, &reg)) {
 		printf ("PHY 1000BT Status read failed\n");
 	} else {
 		if (reg != 0xFFFF) {
@@ -154,14 +364,14 @@ int miiphy_speed (unsigned char addr)
 #endif /* CONFIG_PHY_GIGE */
 
 	/* Check Basic Management Control Register first. */
-	if (miiphy_read (addr, PHY_BMCR, &reg)) {
+	if (miiphy_read (devname, addr, PHY_BMCR, &reg)) {
 		puts ("PHY speed read failed, assuming 10bT\n");
 		return (_10BASET);
 	}
 	/* Check if auto-negotiation is on. */
 	if ((reg & PHY_BMCR_AUTON) != 0) {
 		/* Get auto-negotiation results. */
-		if (miiphy_read (addr, PHY_ANLPAR, &reg)) {
+		if (miiphy_read (devname, addr, PHY_ANLPAR, &reg)) {
 			puts ("PHY AN speed read failed, assuming 10bT\n");
 			return (_10BASET);
 		}
@@ -185,12 +395,12 @@ int miiphy_speed (unsigned char addr)
  *
  * Determine full/half duplex.
  */
-int miiphy_duplex (unsigned char addr)
+int miiphy_duplex (char *devname, unsigned char addr)
 {
 	unsigned short reg;
 
 #if defined(CONFIG_PHY_GIGE)
-	if (miiphy_read (addr, PHY_1000BTSR, &reg)) {
+	if (miiphy_read (devname, addr, PHY_1000BTSR, &reg)) {
 		printf ("PHY 1000BT Status read failed\n");
 	} else {
 		if ( (reg != 0xFFFF) &&
@@ -205,14 +415,14 @@ int miiphy_duplex (unsigned char addr)
 #endif /* CONFIG_PHY_GIGE */
 
 	/* Check Basic Management Control Register first. */
-	if (miiphy_read (addr, PHY_BMCR, &reg)) {
+	if (miiphy_read (devname, addr, PHY_BMCR, &reg)) {
 		puts ("PHY duplex read failed, assuming half duplex\n");
 		return (HALF);
 	}
 	/* Check if auto-negotiation is on. */
 	if ((reg & PHY_BMCR_AUTON) != 0) {
 		/* Get auto-negotiation results. */
-		if (miiphy_read (addr, PHY_ANLPAR, &reg)) {
+		if (miiphy_read (devname, addr, PHY_ANLPAR, &reg)) {
 			puts ("PHY AN duplex read failed, assuming half duplex\n");
 			return (HALF);
 		}
@@ -237,13 +447,13 @@ int miiphy_duplex (unsigned char addr)
  *
  * Determine link status
  */
-int miiphy_link (unsigned char addr)
+int miiphy_link (char *devname, unsigned char addr)
 {
 	unsigned short reg;
 
 	/* dummy read; needed to latch some phys */
-	(void)miiphy_read(addr, PHY_BMSR, &reg);
-	if (miiphy_read (addr, PHY_BMSR, &reg)) {
+	(void)miiphy_read(devname, addr, PHY_BMSR, &reg);
+	if (miiphy_read (devname, addr, PHY_BMSR, &reg)) {
 		puts ("PHY_BMSR read failed, assuming no link\n");
 		return (0);
 	}
diff --git a/cpu/arm920t/at91rm9200/ether.c b/cpu/arm920t/at91rm9200/ether.c
index ca5b7d1..67008d0 100644
--- a/cpu/arm920t/at91rm9200/ether.c
+++ b/cpu/arm920t/at91rm9200/ether.c
@@ -23,6 +23,7 @@
 
 #include <at91rm9200_net.h>
 #include <net.h>
+#include <miiphy.h>
 
 /* ----- Ethernet Buffer definitions ----- */
 
@@ -150,7 +151,6 @@ UCHAR at91rm9200_EmacWritePhy (AT91PS_EMAC p_mac,
 	return TRUE;
 }
 
-
 int eth_init (bd_t * bd)
 {
 	int ret;
@@ -265,8 +265,9 @@ void eth_halt (void)
 {
 };
 
-#if (CONFIG_COMMANDS & CFG_CMD_MII)
-int  miiphy_read(unsigned char addr, unsigned char reg, unsigned short * value)
+#if defined(CONFIG_MII) || (CONFIG_COMMANDS & CFG_CMD_MII)
+int  at91rm9200_miiphy_read(char *devname, unsigned char addr,
+		unsigned char reg, unsigned short * value)
 {
 	at91rm9200_EmacEnableMDIO (p_mac);
 	at91rm9200_EmacReadPhy (p_mac, reg, value);
@@ -274,14 +275,24 @@ int  miiphy_read(unsigned char addr, unsigned char reg, unsigned short * value)
 	return 0;
 }
 
-int  miiphy_write(unsigned char addr, unsigned char reg, unsigned short value)
+int  at91rm9200_miiphy_write(char *devname, unsigned char addr,
+		unsigned char reg, unsigned short value)
 {
 	at91rm9200_EmacEnableMDIO (p_mac);
 	at91rm9200_EmacWritePhy (p_mac, reg, &value);
 	at91rm9200_EmacDisableMDIO (p_mac);
 	return 0;
 }
-#endif	/* CONFIG_COMMANDS & CFG_CMD_MII */
+
+#endif	/* defined(CONFIG_MII) || (CONFIG_COMMANDS & CFG_CMD_MII) */
+
+int at91rm9200_miiphy_initialize(bd_t *bis)
+{
+#if defined(CONFIG_MII) || (CONFIG_COMMANDS & CFG_CMD_MII)
+	miiphy_register("at91rm9200phy", at91rm9200_miiphy_read, at91rm9200_miiphy_write);
+#endif
+	return 0;
+}
 
 #endif	/* CONFIG_COMMANDS & CFG_CMD_NET */
 
diff --git a/cpu/mcf52x2/fec.c b/cpu/mcf52x2/fec.c
index 623a01d..3bf3c8d 100644
--- a/cpu/mcf52x2/fec.c
+++ b/cpu/mcf52x2/fec.c
@@ -519,7 +519,8 @@ void mii_init (void)
  *	  Otherwise they hang in mii_send() !!! Sorry!
  *****************************************************************************/
 
-int miiphy_read (unsigned char addr, unsigned char reg, unsigned short *value)
+int mcf52x2_miiphy_read (char *devname, unsigned char addr,
+		unsigned char reg, unsigned short *value)
 {
 	short rdreg;		/* register working value */
 
@@ -537,7 +538,8 @@ int miiphy_read (unsigned char addr, unsigned char reg, unsigned short *value)
 	return 0;
 }
 
-int miiphy_write (unsigned char addr, unsigned char reg, unsigned short value)
+int mcf52x2_miiphy_write (char *devname, unsigned char addr,
+		unsigned char reg, unsigned short value)
 {
 	short rdreg;		/* register working value */
 
@@ -554,5 +556,15 @@ int miiphy_write (unsigned char addr, unsigned char reg, unsigned short value)
 	return 0;
 }
 #endif /* (CONFIG_COMMANDS & CFG_CMD_MII) && !defined(CONFIG_BITBANGMII) */
-
 #endif /* CFG_CMD_NET, FEC_ENET */
+
+int mcf52x2_miiphy_initialize(bd_t *bis)
+{
+#if (CONFIG_COMMANDS & CFG_CMD_NET) && defined(FEC_ENET)
+#if (CONFIG_COMMANDS & CFG_CMD_MII) && !defined(CONFIG_BITBANGMII)
+	miiphy_register("mcf52x2phy", mcf52x2_miiphy_read, mcf52x2_miiphy_write);
+#endif
+#endif
+	return 0;
+}
+
diff --git a/cpu/mips/au1x00_eth.c b/cpu/mips/au1x00_eth.c
index b7a7652..9ce9b35 100644
--- a/cpu/mips/au1x00_eth.c
+++ b/cpu/mips/au1x00_eth.c
@@ -63,6 +63,10 @@
 #include <asm/io.h>
 #include <asm/au1x00.h>
 
+#if (CONFIG_COMMANDS & CFG_CMD_MII)
+#include <miiphy.h>
+#endif
+
 /* Ethernet Transmit and Receive Buffers */
 #define DBUF_LENGTH  1520
 #define PKT_MAXBUF_SIZE		1518
@@ -233,11 +237,17 @@ int au1x00_enet_initialize(bd_t *bis){
 
 	eth_register(dev);
 
+#if (CONFIG_COMMANDS & CFG_CMD_MII)
+	miiphy_register(dev->name,
+		au1x00_miiphy_read, au1x00_miiphy_write);
+#endif
+
 	return 1;
 }
 
 #if (CONFIG_COMMANDS & CFG_CMD_MII)
-int  miiphy_read(unsigned char addr, unsigned char reg, unsigned short * value)
+int  au1x00_miiphy_read(char *devname, unsigned char addr,
+		unsigned char reg, unsigned short * value)
 {
 	volatile u32 *mii_control_reg = (volatile u32*)(ETH0_BASE+MAC_MII_CNTRL);
 	volatile u32 *mii_data_reg = (volatile u32*)(ETH0_BASE+MAC_MII_DATA);
@@ -269,7 +279,8 @@ int  miiphy_read(unsigned char addr, unsigned char reg, unsigned short * value)
 	return 0;
 }
 
-int  miiphy_write(unsigned char addr, unsigned char reg, unsigned short value)
+int  au1x00_miiphy_write(char *devname, unsigned char addr,
+		unsigned char reg, unsigned short value)
 {
 	volatile u32 *mii_control_reg = (volatile u32*)(ETH0_BASE+MAC_MII_CNTRL);
 	volatile u32 *mii_data_reg = (volatile u32*)(ETH0_BASE+MAC_MII_DATA);
diff --git a/cpu/mpc5xxx/fec.c b/cpu/mpc5xxx/fec.c
index eadb7ec..86c8ce6 100644
--- a/cpu/mpc5xxx/fec.c
+++ b/cpu/mpc5xxx/fec.c
@@ -19,9 +19,13 @@
 #if (CONFIG_COMMANDS & CFG_CMD_NET) && defined(CONFIG_NET_MULTI) && \
 	defined(CONFIG_MPC5xxx_FEC)
 
+#if !(defined(CONFIG_MII) || (CONFIG_COMMANDS & CFG_CMD_MII))
+#error "CONFIG_MII has to be defined!"
+#endif
+
 #if (DEBUG & 0x60)
-static void tfifo_print(mpc5xxx_fec_priv *fec);
-static void rfifo_print(mpc5xxx_fec_priv *fec);
+static void tfifo_print(char *devname, mpc5xxx_fec_priv *fec);
+static void rfifo_print(char *devname, mpc5xxx_fec_priv *fec);
 #endif /* DEBUG */
 
 #if (DEBUG & 0x40)
@@ -35,9 +39,12 @@ typedef struct {
     uint8 head[16];             /* MAC header(6 + 6 + 2) + 2(aligned) */
 } NBUF;
 
+int fec5xxx_miiphy_read(char *devname, uint8 phyAddr, uint8 regAddr, uint16 * retVal);
+int fec5xxx_miiphy_write(char *devname, uint8 phyAddr, uint8 regAddr, uint16 data);
+
 /********************************************************************/
 #if (DEBUG & 0x2)
-static void mpc5xxx_fec_phydump (void)
+static void mpc5xxx_fec_phydump (char *devname)
 {
 	uint16 phyStatus, i;
 	uint8 phyAddr = CONFIG_PHY_ADDR;
@@ -55,7 +62,7 @@ static void mpc5xxx_fec_phydump (void)
 
 	for (i = 0; i < 32; i++) {
 		if (reg_mask[i]) {
-			miiphy_read(phyAddr, i, &phyStatus);
+			miiphy_read(devname, phyAddr, i, &phyStatus);
 			printf("Mii reg %d: 0x%04x\n", i, phyStatus);
 		}
 	}
@@ -457,7 +464,7 @@ static int mpc5xxx_fec_init_phy(struct eth_device *dev, bd_t * bis)
 		/*
 		 * Reset PHY, then delay 300ns
 		 */
-		miiphy_write(phyAddr, 0x0, 0x8000);
+		miiphy_write(dev->name, phyAddr, 0x0, 0x8000);
 		udelay(1000);
 
 		if (fec->xcv_type == MII10) {
@@ -467,11 +474,11 @@ static int mpc5xxx_fec_init_phy(struct eth_device *dev, bd_t * bis)
 #if (DEBUG & 0x2)
 			printf("Forcing 10 Mbps ethernet link... ");
 #endif
-			miiphy_read(phyAddr, 0x1, &phyStatus);
+			miiphy_read(dev->name, phyAddr, 0x1, &phyStatus);
 			/*
-			miiphy_write(fec, phyAddr, 0x0, 0x0100);
+			miiphy_write(dev->name, fec, phyAddr, 0x0, 0x0100);
 			*/
-			miiphy_write(phyAddr, 0x0, 0x0180);
+			miiphy_write(dev->name, phyAddr, 0x0, 0x0180);
 
 			timeout = 20;
 			do {	/* wait for link status to go down */
@@ -482,7 +489,7 @@ static int mpc5xxx_fec_init_phy(struct eth_device *dev, bd_t * bis)
 #endif
 					break;
 				}
-				miiphy_read(phyAddr, 0x1, &phyStatus);
+				miiphy_read(dev->name, phyAddr, 0x1, &phyStatus);
 #if (DEBUG & 0x2)
 				printf("=");
 #endif
@@ -495,7 +502,7 @@ static int mpc5xxx_fec_init_phy(struct eth_device *dev, bd_t * bis)
 					printf("failed. Link is down.\n");
 					break;
 				}
-				miiphy_read(phyAddr, 0x1, &phyStatus);
+				miiphy_read(dev->name, phyAddr, 0x1, &phyStatus);
 #if (DEBUG & 0x2)
 				printf("+");
 #endif
@@ -508,12 +515,12 @@ static int mpc5xxx_fec_init_phy(struct eth_device *dev, bd_t * bis)
 			/*
 			 * Set the auto-negotiation advertisement register bits
 			 */
-			miiphy_write(phyAddr, 0x4, 0x01e1);
+			miiphy_write(dev->name, phyAddr, 0x4, 0x01e1);
 
 			/*
 			 * Set MDIO bit 0.12 = 1(&& bit 0.9=1?) to enable auto-negotiation
 			 */
-			miiphy_write(phyAddr, 0x0, 0x1200);
+			miiphy_write(dev->name, phyAddr, 0x0, 0x1200);
 
 			/*
 			 * Wait for AN completion
@@ -529,7 +536,7 @@ static int mpc5xxx_fec_init_phy(struct eth_device *dev, bd_t * bis)
 					return -1;
 				}
 
-				if (miiphy_read(phyAddr, 0x1, &phyStatus) != 0) {
+				if (miiphy_read(dev->name, phyAddr, 0x1, &phyStatus) != 0) {
 #if (DEBUG & 0x2)
 					printf("PHY auto neg 1 failed 0x%04x...\n", phyStatus);
 #endif
@@ -546,7 +553,7 @@ static int mpc5xxx_fec_init_phy(struct eth_device *dev, bd_t * bis)
 
 #if (DEBUG & 0x2)
 	if (fec->xcv_type != SEVENWIRE)
-		mpc5xxx_fec_phydump ();
+		mpc5xxx_fec_phydump (dev->name);
 #endif
 
 
@@ -631,7 +638,7 @@ static void mpc5xxx_fec_halt(struct eth_device *dev)
 #if (DEBUG & 0x60)
 /********************************************************************/
 
-static void tfifo_print(mpc5xxx_fec_priv *fec)
+static void tfifo_print(char *devname, mpc5xxx_fec_priv *fec)
 {
 	uint16 phyAddr = CONFIG_PHY_ADDR;
 	uint16 phyStatus;
@@ -639,7 +646,7 @@ static void tfifo_print(mpc5xxx_fec_priv *fec)
 	if ((fec->eth->tfifo_lrf_ptr != fec->eth->tfifo_lwf_ptr)
 		|| (fec->eth->tfifo_rdptr != fec->eth->tfifo_wrptr)) {
 
-		miiphy_read(phyAddr, 0x1, &phyStatus);
+		miiphy_read(devname, phyAddr, 0x1, &phyStatus);
 		printf("\nphyStatus: 0x%04x\n", phyStatus);
 		printf("ecntrl:   0x%08x\n", fec->eth->ecntrl);
 		printf("ievent:   0x%08x\n", fec->eth->ievent);
@@ -655,7 +662,7 @@ static void tfifo_print(mpc5xxx_fec_priv *fec)
 	}
 }
 
-static void rfifo_print(mpc5xxx_fec_priv *fec)
+static void rfifo_print(char *devname, mpc5xxx_fec_priv *fec)
 {
 	uint16 phyAddr = CONFIG_PHY_ADDR;
 	uint16 phyStatus;
@@ -663,7 +670,7 @@ static void rfifo_print(mpc5xxx_fec_priv *fec)
 	if ((fec->eth->rfifo_lrf_ptr != fec->eth->rfifo_lwf_ptr)
 		|| (fec->eth->rfifo_rdptr != fec->eth->rfifo_wrptr)) {
 
-		miiphy_read(phyAddr, 0x1, &phyStatus);
+		miiphy_read(devname, phyAddr, 0x1, &phyStatus);
 		printf("\nphyStatus: 0x%04x\n", phyStatus);
 		printf("ecntrl:   0x%08x\n", fec->eth->ecntrl);
 		printf("ievent:   0x%08x\n", fec->eth->ievent);
@@ -694,7 +701,7 @@ static int mpc5xxx_fec_send(struct eth_device *dev, volatile void *eth_data,
 
 #if (DEBUG & 0x20)
 	printf("tbd status: 0x%04x\n", fec->tbdBase[0].status);
-	tfifo_print(fec);
+	tfifo_print(dev->name, fec);
 #endif
 
 	/*
@@ -737,7 +744,7 @@ static int mpc5xxx_fec_send(struct eth_device *dev, volatile void *eth_data,
 	 */
 	if (fec->xcv_type != SEVENWIRE) {
 		uint16 phyStatus;
-		miiphy_read(0, 0x1, &phyStatus);
+		miiphy_read(dev->name, 0, 0x1, &phyStatus);
 	}
 
 	/*
@@ -745,11 +752,11 @@ static int mpc5xxx_fec_send(struct eth_device *dev, volatile void *eth_data,
 	 */
 
 #if (DEBUG & 0x20)
-	tfifo_print(fec);
+	tfifo_print(dev->name, fec);
 #endif
 	SDMA_TASK_ENABLE (FEC_XMIT_TASK_NO);
 #if (DEBUG & 0x20)
-	tfifo_print(fec);
+	tfifo_print(dev->name, fec);
 #endif
 #if (DEBUG & 0x8)
 	printf( "+" );
@@ -896,6 +903,11 @@ int mpc5xxx_fec_initialize(bd_t * bis)
 	sprintf(dev->name, "FEC ETHERNET");
 	eth_register(dev);
 
+#if defined(CONFIG_MII) || (CONFIG_COMMANDS & CFG_CMD_MII)
+	miiphy_register (dev->name,
+			fec5xxx_miiphy_read, fec5xxx_miiphy_write);
+#endif
+
 	/*
 	 * Try to set the mac address now. The fec mac address is
 	 * a garbage after reset. When not using fec for booting
@@ -912,12 +924,13 @@ int mpc5xxx_fec_initialize(bd_t * bis)
 	}
 
 	mpc5xxx_fec_init_phy(dev, bis);
+
 	return 1;
 }
 
 /* MII-interface related functions */
 /********************************************************************/
-int miiphy_read(uint8 phyAddr, uint8 regAddr, uint16 * retVal)
+int fec5xxx_miiphy_read(char *devname, uint8 phyAddr, uint8 regAddr, uint16 * retVal)
 {
 	ethernet_regs *eth = (ethernet_regs *)MPC5XXX_FEC;
 	uint32 reg;		/* convenient holder for the PHY register */
@@ -959,7 +972,7 @@ int miiphy_read(uint8 phyAddr, uint8 regAddr, uint16 * retVal)
 }
 
 /********************************************************************/
-int miiphy_write(uint8 phyAddr, uint8 regAddr, uint16 data)
+int fec5xxx_miiphy_write(char *devname, uint8 phyAddr, uint8 regAddr, uint16 data)
 {
 	ethernet_regs *eth = (ethernet_regs *)MPC5XXX_FEC;
 	uint32 reg;		/* convenient holder for the PHY register */
diff --git a/cpu/mpc8220/fec.c b/cpu/mpc8220/fec.c
index d5cd22e..1201e79 100644
--- a/cpu/mpc8220/fec.c
+++ b/cpu/mpc8220/fec.c
@@ -18,11 +18,13 @@
 #if (CONFIG_COMMANDS & CFG_CMD_NET) && defined(CONFIG_NET_MULTI) && \
     defined(CONFIG_MPC8220_FEC)
 
-/*#if (CONFIG_COMMANDS & CFG_CMD_NET)*/
+#if !(defined(CONFIG_MII) || (CONFIG_COMMANDS & CFG_CMD_MII))
+#error "CONFIG_MII has to be defined!"
+#endif
 
 #ifdef DEBUG
-static void tfifo_print (mpc8220_fec_priv * fec);
-static void rfifo_print (mpc8220_fec_priv * fec);
+static void tfifo_print (char *devname, mpc8220_fec_priv * fec);
+static void rfifo_print (char *devname, mpc8220_fec_priv * fec);
 #endif /* DEBUG */
 
 #ifdef DEBUG
@@ -36,9 +38,12 @@ typedef struct {
 	u8 head[16];		/* MAC header(6 + 6 + 2) + 2(aligned) */
 } NBUF;
 
+int fec8220_miiphy_read (char *devname, u8 phyAddr, u8 regAddr, u16 * retVal);
+int fec8220_miiphy_write (char *devname, u8 phyAddr, u8 regAddr, u16 data);
+
 /********************************************************************/
 #ifdef DEBUG
-static void mpc8220_fec_phydump (void)
+static void mpc8220_fec_phydump (char *devname)
 {
 	u16 phyStatus, i;
 	u8 phyAddr = CONFIG_PHY_ADDR;
@@ -56,7 +61,7 @@ static void mpc8220_fec_phydump (void)
 
 	for (i = 0; i < 32; i++) {
 		if (reg_mask[i]) {
-			miiphy_read (phyAddr, i, &phyStatus);
+			miiphy_read (devname, phyAddr, i, &phyStatus);
 			printf ("Mii reg %d: 0x%04x\n", i, phyStatus);
 		}
 	}
@@ -400,7 +405,7 @@ static int mpc8220_fec_init (struct eth_device *dev, bd_t * bis)
 		/*
 		 * Reset PHY, then delay 300ns
 		 */
-		miiphy_write (phyAddr, 0x0, 0x8000);
+		miiphy_write (dev->name, phyAddr, 0x0, 0x8000);
 		udelay (1000);
 
 		if (fec->xcv_type == MII10) {
@@ -410,11 +415,11 @@ static int mpc8220_fec_init (struct eth_device *dev, bd_t * bis)
 #ifdef DEBUG
 			printf ("Forcing 10 Mbps ethernet link... ");
 #endif
-			miiphy_read (phyAddr, 0x1, &phyStatus);
+			miiphy_read (dev->name, phyAddr, 0x1, &phyStatus);
 			/*
 			   miiphy_write(fec, phyAddr, 0x0, 0x0100);
 			 */
-			miiphy_write (phyAddr, 0x0, 0x0180);
+			miiphy_write (dev->name, phyAddr, 0x0, 0x0180);
 
 			timeout = 20;
 			do {	/* wait for link status to go down */
@@ -425,7 +430,7 @@ static int mpc8220_fec_init (struct eth_device *dev, bd_t * bis)
 #endif
 					break;
 				}
-				miiphy_read (phyAddr, 0x1, &phyStatus);
+				miiphy_read (dev->name, phyAddr, 0x1, &phyStatus);
 #ifdef DEBUG
 				printf ("=");
 #endif
@@ -438,7 +443,7 @@ static int mpc8220_fec_init (struct eth_device *dev, bd_t * bis)
 					printf ("failed. Link is down.\n");
 					break;
 				}
-				miiphy_read (phyAddr, 0x1, &phyStatus);
+				miiphy_read (dev->name, phyAddr, 0x1, &phyStatus);
 #ifdef DEBUG
 				printf ("+");
 #endif
@@ -451,12 +456,12 @@ static int mpc8220_fec_init (struct eth_device *dev, bd_t * bis)
 			/*
 			 * Set the auto-negotiation advertisement register bits
 			 */
-			miiphy_write (phyAddr, 0x4, 0x01e1);
+			miiphy_write (dev->name, phyAddr, 0x4, 0x01e1);
 
 			/*
 			 * Set MDIO bit 0.12 = 1(&& bit 0.9=1?) to enable auto-negotiation
 			 */
-			miiphy_write (phyAddr, 0x0, 0x1200);
+			miiphy_write (dev->name, phyAddr, 0x0, 0x1200);
 
 			/*
 			 * Wait for AN completion
@@ -472,7 +477,7 @@ static int mpc8220_fec_init (struct eth_device *dev, bd_t * bis)
 					return -1;
 				}
 
-				if (miiphy_read (phyAddr, 0x1, &phyStatus) !=
+				if (miiphy_read (dev->name, phyAddr, 0x1, &phyStatus) !=
 				    0) {
 #ifdef DEBUG
 					printf ("PHY auto neg 1 failed 0x%04x...\n", phyStatus);
@@ -495,7 +500,7 @@ static int mpc8220_fec_init (struct eth_device *dev, bd_t * bis)
 
 #ifdef DEBUG
 	if (fec->xcv_type != SEVENWIRE)
-		mpc8220_fec_phydump ();
+		mpc8220_fec_phydump (dev->name);
 #endif
 
 	/*
@@ -518,7 +523,7 @@ static void mpc8220_fec_halt (struct eth_device *dev)
 
 #ifdef DEBUG
 	if (fec->xcv_type != SEVENWIRE)
-		mpc8220_fec_phydump ();
+		mpc8220_fec_phydump (dev->name);
 #endif
 
 	/*
@@ -573,7 +578,7 @@ static void mpc8220_fec_halt (struct eth_device *dev)
 #ifdef DEBUG
 /********************************************************************/
 
-static void tfifo_print (mpc8220_fec_priv * fec)
+static void tfifo_print (char *devname, mpc8220_fec_priv * fec)
 {
 	u16 phyAddr = CONFIG_PHY_ADDR;
 	u16 phyStatus;
@@ -581,7 +586,7 @@ static void tfifo_print (mpc8220_fec_priv * fec)
 	if ((fec->eth->tfifo_lrf_ptr != fec->eth->tfifo_lwf_ptr)
 	    || (fec->eth->tfifo_rdptr != fec->eth->tfifo_wrptr)) {
 
-		miiphy_read (phyAddr, 0x1, &phyStatus);
+		miiphy_read (devname, phyAddr, 0x1, &phyStatus);
 		printf ("\nphyStatus: 0x%04x\n", phyStatus);
 		printf ("ecntrl:   0x%08x\n", fec->eth->ecntrl);
 		printf ("ievent:   0x%08x\n", fec->eth->ievent);
@@ -597,7 +602,7 @@ static void tfifo_print (mpc8220_fec_priv * fec)
 	}
 }
 
-static void rfifo_print (mpc8220_fec_priv * fec)
+static void rfifo_print (char *devname, mpc8220_fec_priv * fec)
 {
 	u16 phyAddr = CONFIG_PHY_ADDR;
 	u16 phyStatus;
@@ -605,7 +610,7 @@ static void rfifo_print (mpc8220_fec_priv * fec)
 	if ((fec->eth->rfifo_lrf_ptr != fec->eth->rfifo_lwf_ptr)
 	    || (fec->eth->rfifo_rdptr != fec->eth->rfifo_wrptr)) {
 
-		miiphy_read (phyAddr, 0x1, &phyStatus);
+		miiphy_read (devname, phyAddr, 0x1, &phyStatus);
 		printf ("\nphyStatus: 0x%04x\n", phyStatus);
 		printf ("ecntrl:   0x%08x\n", fec->eth->ecntrl);
 		printf ("ievent:   0x%08x\n", fec->eth->ievent);
@@ -636,7 +641,7 @@ static int mpc8220_fec_send (struct eth_device *dev, volatile void *eth_data,
 
 #ifdef DEBUG
 	printf ("tbd status: 0x%04x\n", fec->tbdBase[0].status);
-	tfifo_print (fec);
+	tfifo_print (dev->name, fec);
 #endif
 
 	/*
@@ -680,7 +685,7 @@ static int mpc8220_fec_send (struct eth_device *dev, volatile void *eth_data,
 	if (fec->xcv_type != SEVENWIRE) {
 		u16 phyStatus;
 
-		miiphy_read (0, 0x1, &phyStatus);
+		miiphy_read (dev->name, 0, 0x1, &phyStatus);
 	}
 
 	/*
@@ -688,13 +693,13 @@ static int mpc8220_fec_send (struct eth_device *dev, volatile void *eth_data,
 	 */
 
 #ifdef DEBUG
-	tfifo_print (fec);
+	tfifo_print (dev->name, fec);
 #endif
 
 	DMA_TASK_ENABLE (FEC_XMIT_TASK_NO);
 
 #ifdef DEBUG
-	tfifo_print (fec);
+	tfifo_print (dev->name, fec);
 #endif
 
 #ifdef DEBUG
@@ -842,6 +847,11 @@ int mpc8220_fec_initialize (bd_t * bis)
 	sprintf (dev->name, "FEC ETHERNET");
 	eth_register (dev);
 
+#if defined(CONFIG_MII) || (CONFIG_COMMANDS & CFG_CMD_MII)
+	miiphy_register (dev->name,
+			fec8220_miiphy_read, fec8220_miiphy_write);
+#endif
+
 	/*
 	 * Try to set the mac address now. The fec mac address is
 	 * a garbage after reset. When not using fec for booting
@@ -875,7 +885,7 @@ int mpc8220_fec_initialize (bd_t * bis)
 
 /* MII-interface related functions */
 /********************************************************************/
-int miiphy_read (u8 phyAddr, u8 regAddr, u16 * retVal)
+int fec8220_miiphy_read (char *devname, u8 phyAddr, u8 regAddr, u16 * retVal)
 {
 	ethernet_regs *eth = (ethernet_regs *) MMAP_FEC1;
 	u32 reg;		/* convenient holder for the PHY register */
@@ -919,7 +929,7 @@ int miiphy_read (u8 phyAddr, u8 regAddr, u16 * retVal)
 }
 
 /********************************************************************/
-int miiphy_write (u8 phyAddr, u8 regAddr, u16 data)
+int fec8220_miiphy_write (char *devname, u8 phyAddr, u8 regAddr, u16 data)
 {
 	ethernet_regs *eth = (ethernet_regs *) MMAP_FEC1;
 	u32 reg;		/* convenient holder for the PHY register */
diff --git a/cpu/mpc8260/ether_fcc.c b/cpu/mpc8260/ether_fcc.c
index 0393afa..ed3515f 100644
--- a/cpu/mpc8260/ether_fcc.c
+++ b/cpu/mpc8260/ether_fcc.c
@@ -47,6 +47,10 @@
 #include <config.h>
 #include <net.h>
 
+#if defined(CONFIG_MII) || (CONFIG_COMMANDS & CFG_CMD_MII)
+#include <miiphy.h>
+#endif
+
 #if defined(CONFIG_ETHER_ON_FCC) && (CONFIG_COMMANDS & CFG_CMD_NET) && \
 	defined(CONFIG_NET_MULTI)
 
@@ -386,6 +390,12 @@ int fec_initialize(bd_t *bis)
 		dev->recv   = fec_recv;
 
 		eth_register(dev);
+
+#if (defined(CONFIG_MII) || (CONFIG_COMMANDS & CFG_CMD_MII)) \
+		&& defined(CONFIG_BITBANGMII)
+		miiphy_register(dev->name,
+				bb_miiphy_read,	bb_miiphy_write);
+#endif
 	}
 
 	return 1;
diff --git a/cpu/mpc85xx/ether_fcc.c b/cpu/mpc85xx/ether_fcc.c
index cbbb3a4..7edb294 100644
--- a/cpu/mpc85xx/ether_fcc.c
+++ b/cpu/mpc85xx/ether_fcc.c
@@ -48,6 +48,10 @@
 #include <config.h>
 #include <net.h>
 
+#if defined(CONFIG_MII) || (CONFIG_COMMANDS & CFG_CMD_MII)
+#include <miiphy.h>
+#endif
+
 #if defined(CONFIG_CPM2)
 
 #if defined(CONFIG_ETHER_ON_FCC) && (CONFIG_COMMANDS & CFG_CMD_NET) && \
@@ -451,6 +455,12 @@ int fec_initialize(bd_t *bis)
 		dev->recv   = fec_recv;
 
 		eth_register(dev);
+
+#if (defined(CONFIG_MII) || (CONFIG_COMMANDS & CFG_CMD_MII)) \
+		&& defined(CONFIG_BITBANGMII)
+		miiphy_register(dev->name,
+				bb_miiphy_read,	bb_miiphy_write);
+#endif
 	}
 
 	return 1;
diff --git a/cpu/mpc8xx/fec.c b/cpu/mpc8xx/fec.c
index f8f56a3..d2f5d88 100644
--- a/cpu/mpc8xx/fec.c
+++ b/cpu/mpc8xx/fec.c
@@ -46,6 +46,11 @@
 
 #if defined(WANT_MII)
 #include <miiphy.h>
+
+#if !(defined(CONFIG_MII) || (CONFIG_COMMANDS & CFG_CMD_MII))
+#error "CONFIG_MII has to be defined!"
+#endif
+
 #endif
 
 #if defined(CONFIG_RMII) && !defined(WANT_MII)
@@ -56,6 +61,11 @@
 static int mii_discover_phy(struct eth_device *dev);
 #endif
 
+int fec8xx_miiphy_read(char *devname, unsigned char addr,
+		unsigned char  reg, unsigned short *value);
+int fec8xx_miiphy_write(char *devname, unsigned char  addr,
+		unsigned char  reg, unsigned short value);
+
 static struct ether_fcc_info_s
 {
 	int ether_index;
@@ -169,6 +179,11 @@ int fec_initialize(bd_t *bis)
 		dev->recv = fec_recv;
 
 		eth_register(dev);
+
+#if defined(CONFIG_MII) || (CONFIG_COMMANDS & CFG_CMD_MII)
+		miiphy_register(dev->name,
+			fec8xx_miiphy_read, fec8xx_miiphy_write);
+#endif
 	}
 	return 1;
 }
@@ -712,7 +727,7 @@ static int fec_init (struct eth_device *dev, bd_t * bd)
 	/*
 	 * adapt the RMII speed to the speed of the phy
 	 */
-	if (miiphy_speed (efis->actual_phy_addr) == _100BASET) {
+	if (miiphy_speed (dev->name, efis->actual_phy_addr) == _100BASET) {
 		fec_100Mbps (dev);
 	} else {
 		fec_10Mbps (dev);
@@ -723,7 +738,7 @@ static int fec_init (struct eth_device *dev, bd_t * bd)
 	/*
 	 * adapt to the half/full speed settings
 	 */
-	if (miiphy_duplex (efis->actual_phy_addr) == FULL) {
+	if (miiphy_duplex (dev->name, efis->actual_phy_addr) == FULL) {
 		fec_full_duplex (dev);
 	} else {
 		fec_half_duplex (dev);
@@ -969,7 +984,8 @@ void mii_init (void)
  *	  Otherwise they hang in mii_send() !!! Sorry!
  *****************************************************************************/
 
-int miiphy_read(unsigned char addr, unsigned char  reg, unsigned short *value)
+int fec8xx_miiphy_read(char *devname, unsigned char addr,
+		unsigned char  reg, unsigned short *value)
 {
 	short rdreg;    /* register working value */
 
@@ -985,7 +1001,8 @@ int miiphy_read(unsigned char addr, unsigned char  reg, unsigned short *value)
 	return 0;
 }
 
-int miiphy_write(unsigned char  addr, unsigned char  reg, unsigned short value)
+int fec8xx_miiphy_write(char *devname, unsigned char  addr,
+		unsigned char  reg, unsigned short value)
 {
 	short rdreg;    /* register working value */
 #ifdef MII_DEBUG
diff --git a/cpu/ppc4xx/4xx_enet.c b/cpu/ppc4xx/4xx_enet.c
index d3f1de4..2d2918e 100644
--- a/cpu/ppc4xx/4xx_enet.c
+++ b/cpu/ppc4xx/4xx_enet.c
@@ -142,7 +142,6 @@ static uint32_t mal_ier;
 struct eth_device *emac0_dev = NULL;
 #endif
 
-
 /*-----------------------------------------------------------------------------+
  * Prototypes and externals.
  *-----------------------------------------------------------------------------*/
@@ -154,6 +153,11 @@ static void mal_err (struct eth_device *dev, unsigned long isr,
 		     unsigned long mal_errr);
 static void emac_err (struct eth_device *dev, unsigned long isr);
 
+extern int phy_setup_aneg (char *devname, unsigned char addr);
+extern int emac4xx_miiphy_read (char *devname, unsigned char addr,
+		unsigned char reg, unsigned short *value);
+extern int emac4xx_miiphy_write (char *devname, unsigned char addr,
+		unsigned char reg, unsigned short value);
 
 /*-----------------------------------------------------------------------------+
 | ppc_4xx_eth_halt
@@ -191,9 +195,6 @@ static void ppc_4xx_eth_halt (struct eth_device *dev)
 	return;
 }
 
-extern int phy_setup_aneg (unsigned char addr);
-extern int miiphy_reset (unsigned char addr);
-
 #if defined (CONFIG_440GX)
 int ppc_4xx_eth_setup_bridge(int devnum, bd_t * bis)
 {
@@ -447,7 +448,7 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
 	 * otherwise, just check the speeds & feeds
 	 */
 	if (hw_p->first_init == 0) {
-		miiphy_reset (reg);
+		miiphy_reset (dev->name, reg);
 
 #if defined(CONFIG_440GX)
 #if defined(CONFIG_CIS8201_PHY)
@@ -457,9 +458,9 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
 		 */
 		if ( ((devnum == 2) || (devnum ==3)) && (4 == ethgroup) ) {
 #if defined(CONFIG_CIS8201_SHORT_ETCH)
-			miiphy_write (reg, 23, 0x1300);
+			miiphy_write (dev->name, reg, 23, 0x1300);
 #else
-			miiphy_write (reg, 23, 0x1000);
+			miiphy_write (dev->name, reg, 23, 0x1000);
 #endif
 			/*
 			 * Vitesse VSC8201/Cicada CIS8201 errata:
@@ -467,26 +468,26 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
 			 * This work around (provided by Vitesse) changes
 			 * the default timer convergence from 8ms to 12ms
 			 */
-			miiphy_write (reg, 0x1f, 0x2a30);
-			miiphy_write (reg, 0x08, 0x0200);
-			miiphy_write (reg, 0x1f, 0x52b5);
-			miiphy_write (reg, 0x02, 0x0004);
-			miiphy_write (reg, 0x01, 0x0671);
-			miiphy_write (reg, 0x00, 0x8fae);
-			miiphy_write (reg, 0x1f, 0x2a30);
-			miiphy_write (reg, 0x08, 0x0000);
-			miiphy_write (reg, 0x1f, 0x0000);
+			miiphy_write (dev->name, reg, 0x1f, 0x2a30);
+			miiphy_write (dev->name, reg, 0x08, 0x0200);
+			miiphy_write (dev->name, reg, 0x1f, 0x52b5);
+			miiphy_write (dev->name, reg, 0x02, 0x0004);
+			miiphy_write (dev->name, reg, 0x01, 0x0671);
+			miiphy_write (dev->name, reg, 0x00, 0x8fae);
+			miiphy_write (dev->name, reg, 0x1f, 0x2a30);
+			miiphy_write (dev->name, reg, 0x08, 0x0000);
+			miiphy_write (dev->name, reg, 0x1f, 0x0000);
 			/* end Vitesse/Cicada errata */
 		}
 #endif
 #endif
 		/* Start/Restart autonegotiation */
-		phy_setup_aneg (reg);
+		phy_setup_aneg (dev->name, reg);
 		udelay (1000);
 	}
 #endif /* defined(CONFIG_PHY_RESET) */
 
-	miiphy_read (reg, PHY_BMSR, &reg_short);
+	miiphy_read (dev->name, reg, PHY_BMSR, &reg_short);
 
 	/*
 	 * Wait if PHY is capable of autonegotiation and autonegotiation is not complete
@@ -508,7 +509,7 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
 				putc ('.');
 			}
 			udelay (1000);	/* 1 ms */
-			miiphy_read (reg, PHY_BMSR, &reg_short);
+			miiphy_read (dev->name, reg, PHY_BMSR, &reg_short);
 
 		}
 		puts (" done\n");
@@ -516,8 +517,8 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
 	}
 #endif /* #ifndef CONFIG_CS8952_PHY */
 
-	speed = miiphy_speed (reg);
-	duplex = miiphy_duplex (reg);
+	speed = miiphy_speed (dev->name, reg);
+	duplex = miiphy_duplex (dev->name, reg);
 
 	if (hw_p->print_speed) {
 		hw_p->print_speed = 0;
@@ -1470,6 +1471,10 @@ int ppc_4xx_eth_initialize (bd_t * bis)
 #else
 		emac0_dev = dev;
 #endif
+#if defined(CONFIG_MII) || (CONFIG_COMMANDS & CFG_CMD_MII)
+		miiphy_register (dev->name,
+				emac4xx_miiphy_read, emac4xx_miiphy_write);
+#endif
 
 	}			/* end for each supported device */
 	return (1);
@@ -1505,6 +1510,16 @@ int eth_rx(void)
 {
 	return (ppc_4xx_eth_rx(emac0_dev));
 }
+
+int emac4xx_miiphy_initialize (bd_t * bis)
+{
+#if defined(CONFIG_MII) || (CONFIG_COMMANDS & CFG_CMD_MII)
+	miiphy_register ("ppc_4xx_eth0",
+			emac4xx_miiphy_read, emac4xx_miiphy_write);
+#endif
+
+	return 0;
+}
 #endif /* !defined(CONFIG_NET_MULTI) */
 
 #endif /* #if (CONFIG_COMMANDS & CFG_CMD_NET) */
diff --git a/cpu/ppc4xx/miiphy.c b/cpu/ppc4xx/miiphy.c
index 24f9154..f319eb8 100644
--- a/cpu/ppc4xx/miiphy.c
+++ b/cpu/ppc4xx/miiphy.c
@@ -55,14 +55,14 @@
 /* Dump out to the screen PHY regs			   */
 /***********************************************************/
 
-void miiphy_dump (unsigned char addr)
+void miiphy_dump (char *devname, unsigned char addr)
 {
 	unsigned long i;
 	unsigned short data;
 
 
 	for (i = 0; i < 0x1A; i++) {
-		if (miiphy_read (addr, i, &data)) {
+		if (miiphy_read (devname, addr, i, &data)) {
 			printf ("read error for reg %lx\n", i);
 			return;
 		}
@@ -79,21 +79,21 @@ void miiphy_dump (unsigned char addr)
 /***********************************************************/
 /* (Re)start autonegotiation				   */
 /***********************************************************/
-int phy_setup_aneg (unsigned char addr)
+int phy_setup_aneg (char *devname, unsigned char addr)
 {
 	unsigned short ctl, adv;
 
 	/* Setup standard advertise */
-	miiphy_read (addr, PHY_ANAR, &adv);
+	miiphy_read (devname, addr, PHY_ANAR, &adv);
 	adv |= (PHY_ANLPAR_ACK | PHY_ANLPAR_RF | PHY_ANLPAR_T4 |
 		PHY_ANLPAR_TXFD | PHY_ANLPAR_TX | PHY_ANLPAR_10FD |
 		PHY_ANLPAR_10);
-	miiphy_write (addr, PHY_ANAR, adv);
+	miiphy_write (devname, addr, PHY_ANAR, adv);
 
 	/* Start/Restart aneg */
-	miiphy_read (addr, PHY_BMCR, &ctl);
+	miiphy_read (devname, addr, PHY_BMCR, &ctl);
 	ctl |= (PHY_BMCR_AUTON | PHY_BMCR_RST_NEG);
-	miiphy_write (addr, PHY_BMCR, ctl);
+	miiphy_write (devname, addr, PHY_BMCR, ctl);
 
 	return 0;
 }
@@ -142,7 +142,8 @@ unsigned int miiphy_getemac_offset (void)
 }
 
 
-int miiphy_read (unsigned char addr, unsigned char reg, unsigned short *value)
+int emac4xx_miiphy_read (char *devname, unsigned char addr,
+		unsigned char reg, unsigned short *value)
 {
 	unsigned long sta_reg;	/* STA scratch area */
 	unsigned long i;
@@ -207,7 +208,8 @@ int miiphy_read (unsigned char addr, unsigned char reg, unsigned short *value)
 /* write a phy reg and return the value with a rc	    */
 /***********************************************************/
 
-int miiphy_write (unsigned char addr, unsigned char reg, unsigned short value)
+int emac4xx_miiphy_write (char *devname, unsigned char addr,
+		unsigned char reg, unsigned short value)
 {
 	unsigned long sta_reg;	/* STA scratch area */
 	unsigned long i;
diff --git a/drivers/eepro100.c b/drivers/eepro100.c
index 0054e87..04c17f6 100644
--- a/drivers/eepro100.c
+++ b/drivers/eepro100.c
@@ -26,6 +26,7 @@
 #include <net.h>
 #include <asm/io.h>
 #include <pci.h>
+#include <miiphy.h>
 
 #undef DEBUG
 
@@ -271,49 +272,124 @@ static inline void OUTL (struct eth_device *dev, int command, u_long addr)
 	*(volatile u32 *) ((addr + dev->iobase)) = cpu_to_le32 (command);
 }
 
-#if defined (CONFIG_MII) || (CONFIG_COMMANDS & CFG_CMD_MII)
+#if defined(CONFIG_MII) || (CONFIG_COMMANDS & CFG_CMD_MII)
 static inline int INL (struct eth_device *dev, u_long addr)
 {
 	return le32_to_cpu (*(volatile u32 *) (addr + dev->iobase));
 }
 
-int miiphy_read (unsigned char	addr,
-		unsigned char  reg,
-		unsigned short *value)
+static int get_phyreg (struct eth_device *dev, unsigned char addr,
+		unsigned char reg, unsigned short *value)
 {
-	int cmd = (2 << 26) | ((addr & 0x1f) << 21) | ((reg & 0x1f) << 16);
-
-	struct eth_device *dev = eth_get_dev ();
+	int cmd;
+	int timeout = 50;
 
+	/* read requested data */
+	cmd = (2 << 26) | ((addr & 0x1f) << 21) | ((reg & 0x1f) << 16);
 	OUTL (dev, cmd, SCBCtrlMDI);
 
 	do {
+		udelay(1000);
 		cmd = INL (dev, SCBCtrlMDI);
-	} while (!(cmd & (1 << 28)));
+	} while (!(cmd & (1 << 28)) && (--timeout));
+
+	if (timeout == 0)
+		return -1;
 
 	*value = (unsigned short) (cmd & 0xffff);
 
 	return 0;
 }
 
-int miiphy_write (unsigned char	 addr,
-		unsigned char  reg,
-		unsigned short value)
+static int set_phyreg (struct eth_device *dev, unsigned char addr,
+		unsigned char reg, unsigned short value)
 {
-	int cmd = (1 << 26) | ((addr & 0x1f) << 21) | ((reg & 0x1f) << 16);
-
-	struct eth_device *dev = eth_get_dev ();
+	int cmd;
+	int timeout = 50;
 
+	/* write requested data */
+	cmd = (1 << 26) | ((addr & 0x1f) << 21) | ((reg & 0x1f) << 16);
 	OUTL (dev, cmd | value, SCBCtrlMDI);
 
-	while (!(INL (dev, SCBCtrlMDI) & (1 << 28)));
+	while (!(INL (dev, SCBCtrlMDI) & (1 << 28)) && (--timeout))
+		udelay(1000);
+
+	if (timeout == 0)
+		return -1;
 
 	return 0;
 }
-#endif /* (CONFIG_MII) || (CONFIG_COMMANDS & CFG_CMD_MII) */
 
-	/* Wait for the chip get the command.
-	 */
+/* Check if given phyaddr is valid, i.e. there is a PHY connected.
+ * Do this by checking model value field from ID2 register.
+ */
+static struct eth_device* verify_phyaddr (char *devname, unsigned char addr)
+{
+	struct eth_device *dev;
+	unsigned short value;
+	unsigned char model;
+
+	dev = eth_get_dev_by_name(devname);
+	if (dev == NULL) {
+		printf("%s: no such device\n", devname);
+		return NULL;
+	}
+
+	/* read id2 register */
+	if (get_phyreg(dev, addr, PHY_PHYIDR2, &value) != 0) {
+		printf("%s: mii read timeout!\n", devname);
+		return NULL;
+	}
+
+	/* get model */
+	model = (unsigned char)((value >> 4) & 0x003f);
+
+	if (model == 0) {
+		printf("%s: no PHY at address %d\n", devname, addr);
+		return NULL;
+	}
+
+	return dev;
+}
+
+static int eepro100_miiphy_read (char *devname, unsigned char addr,
+		unsigned char reg, unsigned short *value)
+{
+	struct eth_device *dev;
+
+	dev = verify_phyaddr(devname, addr);
+	if (dev == NULL)
+		return -1;
+
+	if (get_phyreg(dev, addr, reg, value) != 0) {
+		printf("%s: mii read timeout!\n", devname);
+		return -1;
+	}
+
+	return 0;
+}
+
+static int eepro100_miiphy_write (char *devname, unsigned char addr,
+		unsigned char reg, unsigned short value)
+{
+	struct eth_device *dev;
+
+	dev = verify_phyaddr(devname, addr);
+	if (dev == NULL)
+		return -1;
+
+	if (set_phyreg(dev, addr, reg, value) != 0) {
+		printf("%s: mii write timeout!\n", devname);
+		return -1;
+	}
+
+	return 0;
+}
+
+#endif /* defined(CONFIG_MII) || (CONFIG_COMMANDS & CFG_CMD_MII) */
+
+/* Wait for the chip get the command.
+*/
 static int wait_for_eepro100 (struct eth_device *dev)
 {
 	int i;
@@ -386,6 +462,12 @@ int eepro100_initialize (bd_t * bis)
 
 		eth_register (dev);
 
+#if defined (CONFIG_MII) || (CONFIG_COMMANDS & CFG_CMD_MII)
+		/* register mii command access routines */
+		miiphy_register(dev->name,
+				eepro100_miiphy_read, eepro100_miiphy_write);
+#endif
+
 		card_number++;
 
 		/* Set the latency timer for value.
diff --git a/drivers/ns7520_eth.c b/drivers/ns7520_eth.c
index bcdc27f..a5a20df 100644
--- a/drivers/ns7520_eth.c
+++ b/drivers/ns7520_eth.c
@@ -767,8 +767,8 @@ enum mii_status {
 /**
  * Read a 16-bit value from an MII register.
  */
-extern int miiphy_read(unsigned char const addr, unsigned char const reg,
-		       unsigned short *const value)
+extern int ns7520_miiphy_read(char *devname, unsigned char const addr,
+		unsigned char const reg, unsigned short *const value)
 {
 	int ret = MII_STATUS_FAILURE;
 
@@ -813,8 +813,8 @@ extern int miiphy_read(unsigned char const addr, unsigned char const reg,
 /**
  * Write a 16-bit value to an MII register.
  */
-extern int miiphy_write(unsigned char const addr, unsigned char const reg,
-			unsigned short const value)
+extern int ns7520_miiphy_write(char *devname, unsigned char const addr,
+		unsigned char const reg, unsigned short const value)
 {
 	int ret = MII_STATUS_FAILURE;
 
@@ -847,3 +847,13 @@ extern int miiphy_write(unsigned char const addr, unsigned char const reg,
 }
 #endif				/* defined(CONFIG_MII) */
 #endif				/* CONFIG_DRIVER_NS7520_ETHERNET */
+
+int ns7520_miiphy_initialize(bd_t *bis)
+{
+#if defined(CONFIG_DRIVER_NS7520_ETHERNET)
+#if defined(CONFIG_MII)
+	miiphy_register("ns7520phy", ns7520_miiphy_read, ns7520_miiphy_write);
+#endif
+#endif
+	return 0;
+}
diff --git a/drivers/tsec.c b/drivers/tsec.c
index 069a42f..f860dae 100644
--- a/drivers/tsec.c
+++ b/drivers/tsec.c
@@ -21,8 +21,9 @@
 
 #if defined(CONFIG_TSEC_ENET)
 #include "tsec.h"
+#include "miiphy.h"
 
-#define TX_BUF_CNT 2
+#define TX_BUF_CNT		2
 
 static uint rxIdx;	/* index of the current RX buffer */
 static uint txIdx;	/* index of the current TX buffer */
@@ -120,6 +121,10 @@ struct phy_info * get_phy_info(struct eth_device *dev);
 void phy_run_commands(struct tsec_private *priv, struct phy_cmd *cmd);
 static void adjust_link(struct eth_device *dev);
 static void relocate_cmds(void);
+static int tsec_miiphy_write(char *devname, unsigned char addr,
+		unsigned char reg, unsigned short value);
+static int tsec_miiphy_read(char *devname, unsigned char addr,
+		unsigned char reg, unsigned short *value);
 
 /* Initialize device structure. Returns success if PHY
  * initialization succeeded (i.e. if it recognizes the PHY)
@@ -169,6 +174,11 @@ int tsec_initialize(bd_t *bis, int index, char *devname)
 	priv->regs->maccfg1 |= MACCFG1_SOFT_RESET;
 	priv->regs->maccfg1 &= ~(MACCFG1_SOFT_RESET);
 
+#if defined(CONFIG_MII) || (CONFIG_COMMANDS & CFG_CMD_MII) \
+	&& !defined(BITBANGMII)
+	miiphy_register(dev->name, tsec_miiphy_read, tsec_miiphy_write);
+#endif
+
 	/* Try to initialize PHY here, and return */
 	return init_phy(dev);
 }
@@ -1058,7 +1068,8 @@ static void relocate_cmds(void)
 }
 
 
-#ifndef CONFIG_BITBANGMII
+#if defined(CONFIG_MII) || (CONFIG_COMMANDS & CFG_CMD_MII) \
+	&& !defined(BITBANGMII)
 
 struct tsec_private * get_priv_for_phy(unsigned char phyaddr)
 {
@@ -1078,7 +1089,8 @@ struct tsec_private * get_priv_for_phy(unsigned char phyaddr)
  * Returns:
  *  0 on success
  */
-int miiphy_read(unsigned char addr, unsigned char reg, unsigned short *value)
+static int tsec_miiphy_read(char *devname, unsigned char addr,
+		unsigned char reg, unsigned short *value)
 {
 	unsigned short ret;
 	struct tsec_private *priv = get_priv_for_phy(addr);
@@ -1100,7 +1112,8 @@ int miiphy_read(unsigned char addr, unsigned char reg, unsigned short *value)
  * Returns:
  *  0 on success
  */
-int miiphy_write(unsigned char addr, unsigned char reg, unsigned short value)
+static int tsec_miiphy_write(char *devname, unsigned char addr,
+		unsigned char reg, unsigned short value)
 {
 	struct tsec_private *priv = get_priv_for_phy(addr);
 
@@ -1114,6 +1127,7 @@ int miiphy_write(unsigned char addr, unsigned char reg, unsigned short value)
 	return 0;
 }
 
-#endif /* CONFIG_BITBANGMII */
+#endif /* defined(CONFIG_MII) || (CONFIG_COMMANDS & CFG_CMD_MII)
+		&& !defined(BITBANGMII) */
 
 #endif /* CONFIG_TSEC_ENET */
diff --git a/include/configs/Alaska8220.h b/include/configs/Alaska8220.h
index 9a3acfe..c08b2c3 100644
--- a/include/configs/Alaska8220.h
+++ b/include/configs/Alaska8220.h
@@ -90,6 +90,7 @@
 				CFG_CMD_SNTP	)
 
 #define CONFIG_NET_MULTI
+#define CONFIG_MII
 
 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
 #include <cmd_confdefs.h>
diff --git a/include/configs/IAD210.h b/include/configs/IAD210.h
index fd15b85..32d59a4 100644
--- a/include/configs/IAD210.h
+++ b/include/configs/IAD210.h
@@ -88,6 +88,7 @@
 
 # undef  CONFIG_SCC1_ENET		/* disable SCC1 ethernet */
 # define CONFIG_FEC_ENET    1	/* use FEC ethernet  */
+# define CONFIG_MII         1
 # define CFG_DISCOVER_PHY   1
 # define CONFIG_FEC_UTOPIA  1
 # define CONFIG_ETHADDR     08:00:06:26:A2:6D
diff --git a/include/configs/ICU862.h b/include/configs/ICU862.h
index b0c8ac6..73ff0a3 100644
--- a/include/configs/ICU862.h
+++ b/include/configs/ICU862.h
@@ -85,6 +85,7 @@
 
 #undef	CONFIG_SCC1_ENET		/* disable SCC1 ethernet */
 #define	CONFIG_FEC_ENET		1	/* use FEC ethernet  */
+#define	CONFIG_MII		1
 #if 1
 #define CFG_DISCOVER_PHY	1
 #else
diff --git a/include/configs/IceCube.h b/include/configs/IceCube.h
index 6a9a05d..9d4e7b2 100644
--- a/include/configs/IceCube.h
+++ b/include/configs/IceCube.h
@@ -71,6 +71,7 @@
 #define CFG_XLB_PIPELINING	1
 
 #define CONFIG_NET_MULTI	1
+#define CONFIG_MII		1
 #define CONFIG_EEPRO100		1
 #define CFG_RX_ETH_BUFFER	8  /* use 8 rx buffer on eepro100  */
 #define CONFIG_NS8382X		1
@@ -79,6 +80,7 @@
 
 #else	/* MPC5100 */
 
+#define CONFIG_MII		1
 #define ADD_PCI_CMD		0  /* no CFG_CMD_PCI */
 
 #endif
diff --git a/include/configs/KUP4K.h b/include/configs/KUP4K.h
index 3457770..4d39b35 100644
--- a/include/configs/KUP4K.h
+++ b/include/configs/KUP4K.h
@@ -141,6 +141,7 @@
 #define CONFIG_RTC_PCF8563		/* use Philips PCF8563 RTC	*/
 
 #define CFG_DISCOVER_PHY
+#define CONFIG_MII
 
 #if 0
 #define CONFIG_ETHADDR                  00:0B:64:00:00:00 /* our OUI from IEEE */
diff --git a/include/configs/KUP4X.h b/include/configs/KUP4X.h
index 5bad824..9a42cb1 100644
--- a/include/configs/KUP4X.h
+++ b/include/configs/KUP4X.h
@@ -150,6 +150,7 @@
 #define CONFIG_RTC_PCF8563		/* use Philips PCF8563 RTC	*/
 
 #define CFG_DISCOVER_PHY
+#define CONFIG_MII
 
 #if 0
 #define CONFIG_ETHADDR                  00:0B:64:80:00:00 /* our OUI from IEEE */
diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h
index db878cb..2d5031b 100644
--- a/include/configs/MPC8560ADS.h
+++ b/include/configs/MPC8560ADS.h
@@ -43,7 +43,9 @@
 
 #define CONFIG_PCI
 #define CONFIG_TSEC_ENET 		/* tsec ethernet support */
+#undef CONFIG_TSEC_ENET 		/* tsec ethernet support */
 #undef  CONFIG_ETHER_ON_FCC             /* cpm FCC ethernet support */
+#define  CONFIG_ETHER_ON_FCC             /* cpm FCC ethernet support */
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_SPD_EEPROM		/* Use SPD EEPROM for DDR setup*/
 #define CONFIG_DDR_DLL			/* possible DLL fix needed */
diff --git a/include/configs/PM520.h b/include/configs/PM520.h
index 49ae55c..1189989 100644
--- a/include/configs/PM520.h
+++ b/include/configs/PM520.h
@@ -72,6 +72,7 @@
 #define CONFIG_PCI_IO_SIZE	0x01000000
 
 #define CONFIG_NET_MULTI	1
+#define CONFIG_MII		1
 #define CONFIG_EEPRO100		1
 #define CFG_RX_ETH_BUFFER	8  /* use 8 rx buffer on eepro100  */
 #undef  CONFIG_NS8382X
diff --git a/include/configs/PM854.h b/include/configs/PM854.h
index 0b8c71d..da01186 100644
--- a/include/configs/PM854.h
+++ b/include/configs/PM854.h
@@ -235,7 +235,7 @@
 #define CONFIG_NET_MULTI
 #define CONFIG_PCI_PNP			/* do pci plug-and-play */
 
-/* #define CONFIG_EEPRO100	XXX - FIXME: conflicts when CONFIG_MII is enabled */
+#define CONFIG_EEPRO100
 #define	CONFIG_E1000
 #undef	CONFIG_TULIP
 
diff --git a/include/configs/QS860T.h b/include/configs/QS860T.h
index 8d29a31..37c5cf4 100644
--- a/include/configs/QS860T.h
+++ b/include/configs/QS860T.h
@@ -56,6 +56,7 @@
 #define CONFIG_QS860T		1	/* ...on a QS860T module */
 
 #define CONFIG_FEC_ENET		1	/* FEC 10/100BaseT ethernet */
+#define CONFIG_MII
 #define FEC_INTERRUPT		SIU_LEVEL1
 #undef CONFIG_SCC1_ENET			/* SCC1 10BaseT ethernet */
 #define CFG_DISCOVER_PHY
diff --git a/include/configs/SXNI855T.h b/include/configs/SXNI855T.h
index 9ce83b4..c1c765f 100644
--- a/include/configs/SXNI855T.h
+++ b/include/configs/SXNI855T.h
@@ -142,6 +142,7 @@
 # define CFG_I2C_EEPROM_ADDR_LEN 2	/* two byte address		*/
 
 #define	CONFIG_FEC_ENET		1	/* use FEC ethernet  */
+#define	CONFIG_MII		1
 
 #define CFG_DISCOVER_PHY
 
diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h
index a57f7cf..1236ce3 100644
--- a/include/configs/TQM5200.h
+++ b/include/configs/TQM5200.h
@@ -83,7 +83,7 @@
 #define CONFIG_PCI_IO_SIZE	0x01000000
 
 #define CONFIG_NET_MULTI	1
-/* #define CONFIG_EEPRO100	XXX - FIXME: conflicts when CONFIG_MII is enabled */
+#define CONFIG_EEPRO100
 #define CFG_RX_ETH_BUFFER	8  /* use 8 rx buffer on eepro100  */
 #define CONFIG_NS8382X		1
 #endif	/* CONFIG_STK52XX */
diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h
index 0fad36a..d434eb7 100644
--- a/include/configs/TQM834x.h
+++ b/include/configs/TQM834x.h
@@ -280,6 +280,7 @@ extern int tqm834x_num_flash_banks;
 
 
 #undef CONFIG_EEPRO100
+#define CONFIG_EEPRO100
 #undef CONFIG_TULIP
 
 #if !defined(CONFIG_PCI_PNP)
diff --git a/include/configs/TQM8560.h b/include/configs/TQM8560.h
index 04966d7..d2c230d 100644
--- a/include/configs/TQM8560.h
+++ b/include/configs/TQM8560.h
@@ -283,7 +283,7 @@
 #define CONFIG_NET_MULTI
 #define CONFIG_PCI_PNP			/* do pci plug-and-play */
 
-/* #define CONFIG_EEPRO100	XXX - FIXME: conflicts when CONFIG_MII is enabled */
+#define CONFIG_EEPRO100
 #undef CONFIG_TULIP
 
 #if !defined(CONFIG_PCI_PNP)
diff --git a/include/configs/Total5200.h b/include/configs/Total5200.h
index 7e3c11e..ab02dd1 100644
--- a/include/configs/Total5200.h
+++ b/include/configs/Total5200.h
@@ -100,6 +100,7 @@
 #define CONFIG_PCI_IO_SIZE	0x01000000
 
 #define CONFIG_NET_MULTI	1
+#define CONFIG_MII		1
 #define CONFIG_EEPRO100		1
 #define CFG_RX_ETH_BUFFER	8  /* use 8 rx buffer on eepro100  */
 #define CONFIG_NS8382X		1
@@ -108,6 +109,7 @@
 
 #else	/* MGT5100 */
 
+#define CONFIG_MII		1
 #define ADD_PCI_CMD		0  /* no CFG_CMD_PCI */
 
 #endif
diff --git a/include/configs/Yukon8220.h b/include/configs/Yukon8220.h
index 2d3c0e5..37ef105 100644
--- a/include/configs/Yukon8220.h
+++ b/include/configs/Yukon8220.h
@@ -90,6 +90,7 @@
 				CFG_CMD_SNTP	)
 
 #define CONFIG_NET_MULTI
+#define CONFIG_MII
 
 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
 #include <cmd_confdefs.h>
diff --git a/include/configs/at91rm9200dk.h b/include/configs/at91rm9200dk.h
index f0c0283..8fad55d 100644
--- a/include/configs/at91rm9200dk.h
+++ b/include/configs/at91rm9200dk.h
@@ -98,7 +98,7 @@
 /* #define CONFIG_ENV_OVERWRITE	1 */
 
 #define CONFIG_COMMANDS		\
-		       ((CONFIG_CMD_DFL | \
+		       ((CONFIG_CMD_DFL | CFG_CMD_MII |\
 			CFG_CMD_DHCP ) & \
 		      ~(CFG_CMD_BDI | \
 			CFG_CMD_IMI | \
diff --git a/include/configs/cpci5200.h b/include/configs/cpci5200.h
index 3898f91..711e348 100644
--- a/include/configs/cpci5200.h
+++ b/include/configs/cpci5200.h
@@ -83,6 +83,8 @@
 #define CONFIG_PCI_IO_PHYS	CONFIG_PCI_IO_BUS
 #define CONFIG_PCI_IO_SIZE	0x01000000
 #endif
+
+#define CONFIG_MII
 #if 0				/* test-only !!! */
 #define CONFIG_NET_MULTI	1
 #define CONFIG_EEPRO100		1
diff --git a/include/configs/o2dnt.h b/include/configs/o2dnt.h
index 62b90e8..04d7d8a 100644
--- a/include/configs/o2dnt.h
+++ b/include/configs/o2dnt.h
@@ -69,7 +69,7 @@
 #define CFG_XLB_PIPELINING	1
 
 #define CONFIG_NET_MULTI	1
-/* #define CONFIG_EEPRO100	XXX - FIXME: conflicts when CONFIG_MII is enabled */
+#define CONFIG_EEPRO100
 #define CFG_RX_ETH_BUFFER	8  /* use 8 rx buffer on eepro100  */
 #define CONFIG_NS8382X		1
 
diff --git a/include/configs/pf5200.h b/include/configs/pf5200.h
index a8edff2..385e6d7 100644
--- a/include/configs/pf5200.h
+++ b/include/configs/pf5200.h
@@ -83,6 +83,7 @@
 #define CONFIG_PCI_IO_PHYS	CONFIG_PCI_IO_BUS
 #define CONFIG_PCI_IO_SIZE	0x01000000
 
+#define CONFIG_MII		1
 #if 0				/* test-only !!! */
 #define CONFIG_NET_MULTI	1
 #define CONFIG_EEPRO100		1
diff --git a/include/miiphy.h b/include/miiphy.h
index afdd5a7..3c6ee77 100644
--- a/include/miiphy.h
+++ b/include/miiphy.h
@@ -38,18 +38,38 @@
 #ifndef _miiphy_h_
 #define _miiphy_h_
 
+#include <net.h>
 
-int  miiphy_read(unsigned char addr, unsigned char reg, unsigned short * value);
-int  miiphy_write(unsigned char addr, unsigned char reg, unsigned short value);
-int  miiphy_info(unsigned char addr, unsigned int  *oui, unsigned char *model,
-		 unsigned char *rev);
-int  miiphy_reset(unsigned char addr);
-int  miiphy_speed(unsigned char addr);
-int  miiphy_duplex(unsigned char addr);
+int  miiphy_read(char *devname, unsigned char addr, unsigned char reg,
+		unsigned short *value);
+int  miiphy_write(char *devname, unsigned char addr, unsigned char reg,
+		unsigned short value);
+int  miiphy_info(char *devname, unsigned char addr, unsigned int  *oui,
+		unsigned char *model, unsigned char *rev);
+int  miiphy_reset(char *devname, unsigned char addr);
+int  miiphy_speed(char *devname, unsigned char addr);
+int  miiphy_duplex(char *devname, unsigned char addr);
 #ifdef CFG_FAULT_ECHO_LINK_DOWN
-int  miiphy_link(unsigned char addr);
+int  miiphy_link(char *devname, unsigned char addr);
 #endif
 
+void miiphy_register(char *devname,
+	int (* read)(char *devname, unsigned char addr,
+		unsigned char reg, unsigned short *value),
+	int (* write)(char *devname, unsigned char addr,
+		unsigned char reg, unsigned short value));
+
+int miiphy_set_current_dev(char *devname);
+char *miiphy_get_current_dev(void);
+
+void miiphy_listdev(void);
+
+#define BB_MII_DEVNAME	"bbmii"
+
+int bb_miiphy_read (char *devname, unsigned char addr,
+		unsigned char reg, unsigned short *value);
+int bb_miiphy_write (char *devname, unsigned char addr,
+		unsigned char reg, unsigned short value);
 
 /* phy seed setup */
 #define AUTO			99
diff --git a/include/net.h b/include/net.h
index 47eab59..461e038 100644
--- a/include/net.h
+++ b/include/net.h
@@ -114,6 +114,7 @@ extern void eth_try_another(int first_restart);	/* Change the device		*/
 extern void eth_set_current(void);		/* set nterface to ethcur var.  */
 #endif
 extern struct eth_device *eth_get_dev(void);	/* get the current device MAC	*/
+extern struct eth_device *eth_get_dev_by_name(char *devname); /* get device	*/
 extern int eth_get_dev_index (void);		/* get the device index         */
 extern void eth_set_enetaddr(int num, char* a);	/* Set new MAC address		*/
 
diff --git a/lib_arm/board.c b/lib_arm/board.c
index a3588d6..fa3c92e 100644
--- a/lib_arm/board.c
+++ b/lib_arm/board.c
@@ -345,8 +345,10 @@ void start_armboot (void)
 #ifdef BOARD_LATE_INIT
 	board_late_init ();
 #endif
-#if (CONFIG_COMMANDS & CFG_CMD_NET) && defined(CONFIG_NET_MULTI)
+#if (CONFIG_COMMANDS & CFG_CMD_NET)
+#if defined(CONFIG_NET_MULTI)
 	puts ("Net:   ");
+#endif
 	eth_initialize(gd->bd);
 #endif
 	/* main_loop() can return to retry autoboot, if so just run it again. */
diff --git a/lib_i386/board.c b/lib_i386/board.c
index a180814..e90eb6e 100644
--- a/lib_i386/board.c
+++ b/lib_i386/board.c
@@ -317,15 +317,6 @@ void start_i386boot (void)
 	misc_init_r();
 #endif
 
-
-#if (CONFIG_COMMANDS & CFG_CMD_NET) && (0)
-	WATCHDOG_RESET();
-# ifdef DEBUG
-	puts ("Reset Ethernet PHY\n");
-# endif
-	reset_phy();
-#endif
-
 #if (CONFIG_COMMANDS & CFG_CMD_PCMCIA) && !(CONFIG_COMMANDS & CFG_CMD_IDE)
 	WATCHDOG_RESET();
 	puts ("PCMCIA:");
@@ -387,12 +378,22 @@ void start_i386boot (void)
 	doc_init();
 #endif
 
-#if (CONFIG_COMMANDS & CFG_CMD_NET) && defined(CONFIG_NET_MULTI)
+#if (CONFIG_COMMANDS & CFG_CMD_NET)
+#if defined(CONFIG_NET_MULTI)
 	WATCHDOG_RESET();
 	puts("Net:   ");
+#endif
 	eth_initialize(gd->bd);
 #endif
 
+#if (CONFIG_COMMANDS & CFG_CMD_NET) && (0)
+	WATCHDOG_RESET();
+# ifdef DEBUG
+	puts ("Reset Ethernet PHY\n");
+# endif
+	reset_phy();
+#endif
+
 #ifdef CONFIG_LAST_STAGE_INIT
 	WATCHDOG_RESET();
 	/*
diff --git a/lib_mips/board.c b/lib_mips/board.c
index 12df61f..839911b 100644
--- a/lib_mips/board.c
+++ b/lib_mips/board.c
@@ -414,8 +414,10 @@ void board_init_r (gd_t *id, ulong dest_addr)
 	misc_init_r ();
 #endif
 
-#if (CONFIG_COMMANDS & CFG_CMD_NET) && defined(CONFIG_NET_MULTI)
+#if (CONFIG_COMMANDS & CFG_CMD_NET)
+#if defined(CONFIG_NET_MULTI)
 	puts ("Net:   ");
+#endif
 	eth_initialize(gd->bd);
 #endif
 
diff --git a/lib_ppc/board.c b/lib_ppc/board.c
index c3ce33f..b8dd18b 100644
--- a/lib_ppc/board.c
+++ b/lib_ppc/board.c
@@ -899,27 +899,6 @@ void board_init_r (gd_t *id, ulong dest_addr)
 		hermes_start_lxt980 ((int) bd->bi_ethspeed);
 #endif
 
-#if (CONFIG_COMMANDS & CFG_CMD_NET) && ( \
-    defined(CONFIG_CCM)		|| \
-    defined(CONFIG_ELPT860)	|| \
-    defined(CONFIG_EP8260)	|| \
-    defined(CONFIG_IP860)	|| \
-    defined(CONFIG_IVML24)	|| \
-    defined(CONFIG_IVMS8)	|| \
-    defined(CONFIG_MPC8260ADS)	|| \
-    defined(CONFIG_MPC8266ADS)	|| \
-    defined(CONFIG_MPC8560ADS)	|| \
-    defined(CONFIG_PCU_E)	|| \
-    defined(CONFIG_RPXSUPER)	|| \
-    defined(CONFIG_STXGP3)	|| \
-    defined(CONFIG_SPD823TS)	|| \
-    defined(CONFIG_RESET_PHY_R)	)
-
-	WATCHDOG_RESET ();
-	debug ("Reset Ethernet PHY\n");
-	reset_phy ();
-#endif
-
 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
 	WATCHDOG_RESET ();
 	puts ("KGDB:  ");
@@ -978,12 +957,35 @@ void board_init_r (gd_t *id, ulong dest_addr)
 	nand_init();		/* go init the NAND */
 #endif
 
-#if (CONFIG_COMMANDS & CFG_CMD_NET) && defined(CONFIG_NET_MULTI)
+#if (CONFIG_COMMANDS & CFG_CMD_NET)
+#if defined(CONFIG_NET_MULTI)
 	WATCHDOG_RESET ();
 	puts ("Net:   ");
+#endif
 	eth_initialize (bd);
 #endif
 
+#if (CONFIG_COMMANDS & CFG_CMD_NET) && ( \
+    defined(CONFIG_CCM)		|| \
+    defined(CONFIG_ELPT860)	|| \
+    defined(CONFIG_EP8260)	|| \
+    defined(CONFIG_IP860)	|| \
+    defined(CONFIG_IVML24)	|| \
+    defined(CONFIG_IVMS8)	|| \
+    defined(CONFIG_MPC8260ADS)	|| \
+    defined(CONFIG_MPC8266ADS)	|| \
+    defined(CONFIG_MPC8560ADS)	|| \
+    defined(CONFIG_PCU_E)	|| \
+    defined(CONFIG_RPXSUPER)	|| \
+    defined(CONFIG_STXGP3)	|| \
+    defined(CONFIG_SPD823TS)	|| \
+    defined(CONFIG_RESET_PHY_R)	)
+
+	WATCHDOG_RESET ();
+	debug ("Reset Ethernet PHY\n");
+	reset_phy ();
+#endif
+
 #ifdef CONFIG_POST
 	post_run (NULL, POST_RAM | post_bootmode_get(0));
 #endif
diff --git a/net/eth.c b/net/eth.c
index cfab0e1..b4ff5ef 100644
--- a/net/eth.c
+++ b/net/eth.c
@@ -60,6 +60,26 @@ struct eth_device *eth_get_dev(void)
 	return eth_current;
 }
 
+struct eth_device *eth_get_dev_by_name(char *devname)
+{
+	struct eth_device *dev, *target_dev;
+
+	if (!eth_devices)
+		return NULL;
+
+	dev = eth_devices;
+	target_dev = NULL;
+	do {
+		if (strcmp(devname, dev->name) == 0) {
+			target_dev = dev;
+			break;
+		}
+		dev = dev->next;
+	} while (dev != eth_devices);
+
+	return target_dev;
+}
+
 int eth_get_dev_index (void)
 {
 	struct eth_device *dev;
@@ -413,4 +433,28 @@ char *eth_get_name (void)
 {
 	return (eth_current ? eth_current->name : "unknown");
 }
+#elif (CONFIG_COMMANDS & CFG_CMD_NET) && !defined(CONFIG_NET_MULTI)
+
+extern int at91rm9200_miiphy_initialize(bd_t *bis);
+extern int emac4xx_miiphy_initialize(bd_t *bis);
+extern int mcf52x2_miiphy_initialize(bd_t *bis);
+extern int ns7520_miiphy_initialize(bd_t *bis);
+
+int eth_initialize(bd_t *bis)
+{
+#if defined(CONFIG_AT91RM9200)
+	at91rm9200_miiphy_initialize(bis);
+#endif
+#if defined(CONFIG_4xx) && !defined(CONFIG_IOP480) \
+	&& !defined(CONFIG_AP1000) && !defined(CONFIG_405)
+	emac4xx_miiphy_initialize(bis);
+#endif
+#if defined(CONFIG_MCF52x2)
+	mcf52x2_miiphy_initialize(bis);
+#endif
+#if defined(CONFIG_NETARM)
+	ns7520_miiphy_initialize(bis);
+#endif
+	return 0;
+}
 #endif
diff --git a/net/net.c b/net/net.c
index d1a15e2..2986924 100644
--- a/net/net.c
+++ b/net/net.c
@@ -461,7 +461,7 @@ restart:
 	/*
 	 * Echo the inverted link state to the fault LED.
 	 */
-	if(miiphy_link(CFG_FAULT_MII_ADDR)) {
+	if(miiphy_link(eth_get_dev()->name, CFG_FAULT_MII_ADDR)) {
 		status_led_set (STATUS_LED_RED, STATUS_LED_OFF);
 	} else {
 		status_led_set (STATUS_LED_RED, STATUS_LED_ON);
@@ -512,7 +512,7 @@ restart:
 			/*
 			 * Echo the inverted link state to the fault LED.
 			 */
-			if(miiphy_link(CFG_FAULT_MII_ADDR)) {
+			if(miiphy_link(eth_get_dev()->name, CFG_FAULT_MII_ADDR)) {
 				status_led_set (STATUS_LED_RED, STATUS_LED_OFF);
 			} else {
 				status_led_set (STATUS_LED_RED, STATUS_LED_ON);