summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorSedji Gaouaou <sedji.gaouaou@atmel.com>2009-06-25 17:04:15 +0200
committerJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>2009-07-12 17:56:11 +0200
commit5ccc2d99d61c81805348b0cd9f79731b271f7daf (patch)
treedfde19180c8d8af8ec146358ef76698e5b0e1534
parent22ee647380c42f44528f99b7c1b423725e542102 (diff)
downloadu-boot-imx-5ccc2d99d61c81805348b0cd9f79731b271f7daf.zip
u-boot-imx-5ccc2d99d61c81805348b0cd9f79731b271f7daf.tar.gz
u-boot-imx-5ccc2d99d61c81805348b0cd9f79731b271f7daf.tar.bz2
at91: Introduction of at91sam9g10 SOC.
AT91sam9g10 is an ARM 926ej-s SOC. It is an evolution of the at91sam9261 with a faster clock speed: 266/133MHz. Signed-off-by: Sedji Gaouaou <sedji.gaouaou@atmel.com>
-rw-r--r--MAINTAINERS1
-rwxr-xr-xMAKEALL3
-rw-r--r--Makefile16
-rw-r--r--board/atmel/at91sam9261ek/at91sam9261ek.c36
-rw-r--r--cpu/arm926ejs/at91/Makefile1
-rw-r--r--doc/README.at912
-rw-r--r--include/asm-arm/arch-at91/hardware.h2
-rw-r--r--include/configs/at91sam9261ek.h13
8 files changed, 67 insertions, 7 deletions
diff --git a/MAINTAINERS b/MAINTAINERS
index 5a8f12c..6fc2901 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -548,6 +548,7 @@ Daniel Gorsulowski <daniel.gorsulowski@esd.eu>
meesc ARM926EJS (AT91SAM9263 SoC)
Sedji Gaouaou<sedji.gaouaou@atmel.com>
+ at91sam9g10ek ARM926EJS (AT91SAM9G10 SoC)
at91sam9m10g45ek ARM926EJS (AT91SAM9G45 SoC)
Marius Gröger <mag@sysgo.de>
diff --git a/MAKEALL b/MAKEALL
index 03ef5b4..3c15f9c 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -586,8 +586,9 @@ LIST_at91=" \
at91sam9260ek \
at91sam9261ek \
at91sam9263ek \
- at91sam9m10g45ek \
+ at91sam9g10ek \
at91sam9g20ek \
+ at91sam9m10g45ek \
at91sam9rlek \
cmc_pu2 \
csb637 \
diff --git a/Makefile b/Makefile
index 55a9648..3e71a08 100644
--- a/Makefile
+++ b/Makefile
@@ -2743,12 +2743,22 @@ at91sam9xeek_config : unconfig
at91sam9261ek_nandflash_config \
at91sam9261ek_dataflash_cs0_config \
at91sam9261ek_dataflash_cs3_config \
-at91sam9261ek_config : unconfig
- @mkdir -p $(obj)include
+at91sam9261ek_config \
+at91sam9g10ek_nandflash_config \
+at91sam9g10ek_dataflash_cs0_config \
+at91sam9g10ek_dataflash_cs3_config \
+at91sam9g10ek_config : unconfig
+ @mkdir -p $(obj)include
+ @if [ "$(findstring 9g10,$@)" ] ; then \
+ echo "#define CONFIG_AT91SAM9G10EK 1" >>$(obj)include/config.h ; \
+ $(XECHO) "... 9G10 Variant" ; \
+ else \
+ echo "#define CONFIG_AT91SAM9261EK 1" >>$(obj)include/config.h ; \
+ fi;
@if [ "$(findstring _nandflash,$@)" ] ; then \
echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \
$(XECHO) "... with environment variable in NAND FLASH" ; \
- elif [ "$(findstring dataflash_cs3,$@)" ] ; then \
+ elif [ "$(findstring dataflash_cs0,$@)" ] ; then \
echo "#define CONFIG_SYS_USE_DATAFLASH_CS3 1" >>$(obj)include/config.h ; \
$(XECHO) "... with environment variable in SPI DATAFLASH CS3" ; \
else \
diff --git a/board/atmel/at91sam9261ek/at91sam9261ek.c b/board/atmel/at91sam9261ek/at91sam9261ek.c
index 0817e60..2f6b599 100644
--- a/board/atmel/at91sam9261ek/at91sam9261ek.c
+++ b/board/atmel/at91sam9261ek/at91sam9261ek.c
@@ -57,6 +57,16 @@ static void at91sam9261ek_nand_hw_init(void)
csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
/* Configure SMC CS3 for NAND/SmartMedia */
+#ifdef CONFIG_AT91SAM9G10EK
+ at91_sys_write(AT91_SMC_SETUP(3),
+ AT91_SMC_NWESETUP_(2) | AT91_SMC_NCS_WRSETUP_(0) |
+ AT91_SMC_NRDSETUP_(2) | AT91_SMC_NCS_RDSETUP_(0));
+ at91_sys_write(AT91_SMC_PULSE(3),
+ AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(7) |
+ AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(7));
+ at91_sys_write(AT91_SMC_CYCLE(3),
+ AT91_SMC_NWECYCLE_(7) | AT91_SMC_NRDCYCLE_(7));
+#else
at91_sys_write(AT91_SMC_SETUP(3),
AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(0) |
AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(0));
@@ -65,6 +75,7 @@ static void at91sam9261ek_nand_hw_init(void)
AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3));
at91_sys_write(AT91_SMC_CYCLE(3),
AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5));
+#endif
at91_sys_write(AT91_SMC_MODE(3),
AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
AT91_SMC_EXNWMODE_DISABLE |
@@ -92,6 +103,21 @@ static void at91sam9261ek_nand_hw_init(void)
static void at91sam9261ek_dm9000_hw_init(void)
{
/* Configure SMC CS2 for DM9000 */
+#ifdef CONFIG_AT91SAM9G10EK
+ at91_sys_write(AT91_SMC_SETUP(2),
+ AT91_SMC_NWESETUP_(3) | AT91_SMC_NCS_WRSETUP_(0) |
+ AT91_SMC_NRDSETUP_(3) | AT91_SMC_NCS_RDSETUP_(0));
+ at91_sys_write(AT91_SMC_PULSE(2),
+ AT91_SMC_NWEPULSE_(6) | AT91_SMC_NCS_WRPULSE_(8) |
+ AT91_SMC_NRDPULSE_(6) | AT91_SMC_NCS_RDPULSE_(8));
+ at91_sys_write(AT91_SMC_CYCLE(2),
+ AT91_SMC_NWECYCLE_(20) | AT91_SMC_NRDCYCLE_(20));
+ at91_sys_write(AT91_SMC_MODE(2),
+ AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
+ AT91_SMC_EXNWMODE_DISABLE |
+ AT91_SMC_BAT_WRITE | AT91_SMC_DBW_16 |
+ AT91_SMC_TDF_(1));
+#else
at91_sys_write(AT91_SMC_SETUP(2),
AT91_SMC_NWESETUP_(2) | AT91_SMC_NCS_WRSETUP_(0) |
AT91_SMC_NRDSETUP_(2) | AT91_SMC_NCS_RDSETUP_(0));
@@ -105,6 +131,7 @@ static void at91sam9261ek_dm9000_hw_init(void)
AT91_SMC_EXNWMODE_DISABLE |
AT91_SMC_BAT_WRITE | AT91_SMC_DBW_16 |
AT91_SMC_TDF_(1));
+#endif
/* Configure Reset signal as output */
at91_set_gpio_output(AT91_PIN_PC10, 0);
@@ -169,7 +196,11 @@ static void at91sam9261ek_lcd_hw_init(void)
at91_sys_write(AT91_PMC_SCER, AT91_PMC_HCK1);
+#ifdef CONFIG_AT91SAM9G10EK
+ gd->fb_base = CONFIG_AT91SAM9G10_LCD_BASE;
+#else
gd->fb_base = AT91SAM9261_SRAM_BASE;
+#endif
}
#ifdef CONFIG_LCD_INFO
@@ -207,8 +238,13 @@ int board_init(void)
/* Enable Ctrlc */
console_init_f();
+#ifdef CONFIG_AT91SAM9G10EK
+ /* arch number of AT91SAM9G10EK-Board */
+ gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9G10EK;
+#else
/* arch number of AT91SAM9261EK-Board */
gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9261EK;
+#endif
/* adress of boot parameters */
gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
diff --git a/cpu/arm926ejs/at91/Makefile b/cpu/arm926ejs/at91/Makefile
index 69051c1..4f467be 100644
--- a/cpu/arm926ejs/at91/Makefile
+++ b/cpu/arm926ejs/at91/Makefile
@@ -29,6 +29,7 @@ COBJS-$(CONFIG_AT91CAP9) += at91cap9_devices.o
COBJS-$(CONFIG_AT91SAM9260) += at91sam9260_devices.o
COBJS-$(CONFIG_AT91SAM9G20) += at91sam9260_devices.o
COBJS-$(CONFIG_AT91SAM9261) += at91sam9261_devices.o
+COBJS-$(CONFIG_AT91SAM9G10) += at91sam9261_devices.o
COBJS-$(CONFIG_AT91SAM9263) += at91sam9263_devices.o
COBJS-$(CONFIG_AT91SAM9RL) += at91sam9rl_devices.o
COBJS-$(CONFIG_AT91SAM9M10G45) += at91sam9m10g45_devices.o
diff --git a/doc/README.at91 b/doc/README.at91
index 269d072..84b5595 100644
--- a/doc/README.at91
+++ b/doc/README.at91
@@ -27,7 +27,7 @@ Environment variables
------------------------------------------------------------------------------
-AT91SAM9261EK
+AT91SAM9261EK, AT91SAM9G10EK
------------------------------------------------------------------------------
Memory map
diff --git a/include/asm-arm/arch-at91/hardware.h b/include/asm-arm/arch-at91/hardware.h
index c42709e..de06a10 100644
--- a/include/asm-arm/arch-at91/hardware.h
+++ b/include/asm-arm/arch-at91/hardware.h
@@ -23,7 +23,7 @@
#define AT91_BASE_SPI AT91SAM9260_BASE_SPI0
#define AT91_ID_UHP AT91SAM9260_ID_UHP
#define AT91_PMC_UHP AT91SAM926x_PMC_UHP
-#elif defined(CONFIG_AT91SAM9261)
+#elif defined(CONFIG_AT91SAM9261) || defined(CONFIG_AT91SAM9G10)
#include <asm/arch/at91sam9261.h>
#define AT91_BASE_SPI AT91SAM9261_BASE_SPI0
#define AT91_ID_UHP AT91SAM9261_ID_UHP
diff --git a/include/configs/at91sam9261ek.h b/include/configs/at91sam9261ek.h
index 83e05b3..6d24023 100644
--- a/include/configs/at91sam9261ek.h
+++ b/include/configs/at91sam9261ek.h
@@ -32,8 +32,11 @@
#define CONFIG_SYS_HZ 1000
#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */
+#ifdef CONFIG_AT91SAM9G10EK
+#define CONFIG_AT91SAM9G10 1 /* It's an Atmel AT91SAM9G10 SoC*/
+#else
#define CONFIG_AT91SAM9261 1 /* It's an Atmel AT91SAM9261 SoC*/
-#define CONFIG_AT91SAM9261EK 1 /* on an AT91SAM9261EK Board */
+#endif
#define CONFIG_ARCH_CPU_INIT
#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
@@ -62,7 +65,11 @@
#define CONFIG_LCD_INFO_BELOW_LOGO 1
#define CONFIG_SYS_WHITE_ON_BLACK 1
#define CONFIG_ATMEL_LCD 1
+#ifdef CONFIG_AT91SAM9261EK
#define CONFIG_ATMEL_LCD_BGR555 1
+#else
+#define CONFIG_AT91SAM9G10_LCD_BASE 0x23E00000 /* LCD is no more in SRAM */
+#endif
#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1
/* LED */
@@ -147,7 +154,11 @@
#define CONFIG_DOS_PARTITION 1
#define CONFIG_SYS_USB_OHCI_CPU_INIT 1
#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00500000 /* AT91SAM9261_UHP_BASE */
+#ifdef CONFIG_AT91SAM9G10EK
+#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9g10"
+#else
#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9261"
+#endif
#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
#define CONFIG_USB_STORAGE 1
#define CONFIG_CMD_FAT 1