Merge branch 'master' of git://git.denx.de/u-boot-sh

43 files changed, 2074 insertions, 322 deletions

diff --git a/MAINTAINERS b/MAINTAINERS
index b37ed0c..5a5b9bd 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1036,6 +1036,7 @@ Mark Jonas <mark.jonas@de.bosch.com>
 Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
 
 	MS7720SE	SH7720
+	R0P77570030RL	SH7757
 	R0P77850011RL	SH7785
 
 #########################################################################
diff --git a/README b/README
index 755d17c..37eda11 100644
--- a/README
+++ b/README
@@ -892,6 +892,18 @@ The following options need to be configured:
 			automatically converts one 32 bit word to two 16 bit
 			words you may also try CONFIG_SMC911X_32_BIT.
 
+		CONFIG_SH_ETHER
+		Support for Renesas on-chip Ethernet controller
+
+			CONFIG_SH_ETHER_USE_PORT
+			Define the number of ports to be used
+
+			CONFIG_SH_ETHER_PHY_ADDR
+			Define the ETH PHY's address
+
+			CONFIG_SH_ETHER_CACHE_WRITEBACK
+			If this option is set, the driver enables cache flush.
+
 - USB Support:
 		At the moment only the UHCI host controller is
 		supported (PIP405, MIP405, MPC5200); define
@@ -1648,6 +1660,11 @@ The following options need to be configured:
 		SPI EEPROM, also an instance works with Crystal A/D and
 		D/As on the SACSng board)
 
+		CONFIG_SH_SPI
+
+		Enables the driver for SPI controller on SuperH. Currently
+		only SH7757 is supported.
+
 		CONFIG_SPI_X
 
 		Enables extended (16-bit) SPI EEPROM addressing.
diff --git a/arch/sh/config.mk b/arch/sh/config.mk
index 4ef85e3..433cc15 100644
--- a/arch/sh/config.mk
+++ b/arch/sh/config.mk
@@ -31,4 +31,10 @@ endif
 PLATFORM_CPPFLAGS += -DCONFIG_SH -D__SH__
 PLATFORM_LDFLAGS += -e $(CONFIG_SYS_TEXT_BASE) --defsym reloc_dst=$(CONFIG_SYS_TEXT_BASE)
 LDFLAGS_u-boot = --gc-sections
+
+ifdef CONFIG_SYS_LDSCRIPT
+LDSCRIPT := $(subst ",,$(CONFIG_SYS_LDSCRIPT))
+else
 LDSCRIPT := $(SRCTREE)/$(CPUDIR)/u-boot.lds
+endif
+
diff --git a/arch/sh/include/asm/cpu_sh4.h b/arch/sh/include/asm/cpu_sh4.h
index fdcebd6..9b29d3a 100644
--- a/arch/sh/include/asm/cpu_sh4.h
+++ b/arch/sh/include/asm/cpu_sh4.h
@@ -44,6 +44,8 @@
 # include <asm/cpu_sh7722.h>
 #elif defined (CONFIG_CPU_SH7723)
 # include <asm/cpu_sh7723.h>
+#elif defined (CONFIG_CPU_SH7757)
+# include <asm/cpu_sh7757.h>
 #elif defined (CONFIG_CPU_SH7763)
 # include <asm/cpu_sh7763.h>
 #elif defined (CONFIG_CPU_SH7780)
diff --git a/arch/sh/include/asm/cpu_sh7757.h b/arch/sh/include/asm/cpu_sh7757.h
new file mode 100644
index 0000000..17a6537
--- /dev/null
+++ b/arch/sh/include/asm/cpu_sh7757.h
@@ -0,0 +1,218 @@
+/*
+ * Copyright (C) 2011  Renesas Solutions Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#ifndef _ASM_CPU_SH7757_H_
+#define _ASM_CPU_SH7757_H_
+
+#define CCR		0xFF00001C
+#define WTCNT		0xFFCC0000
+#define CCR_CACHE_INIT	0x0000090b
+#define CACHE_OC_NUM_WAYS	1
+
+#ifndef __ASSEMBLY__		/* put C only stuff in this section */
+/* MMU */
+struct mmu_regs {
+	unsigned int	reserved[4];
+	unsigned int	mmucr;
+};
+#define MMU_BASE	((struct mmu_regs *)0xff000000)
+
+/* Watchdog */
+#define WTCSR0		0xffcc0002
+#define WRSTCSR_R	0xffcc0003
+#define WRSTCSR_W	0xffcc0002
+#define WTCSR_PREFIX		0xa500
+#define WRSTCSR_PREFIX		0x6900
+#define WRSTCSR_WOVF_PREFIX	0x9600
+
+/* SCIF */
+#define SCIF0_BASE	0xfe4b0000	/* The real name is SCIF2 */
+#define SCIF1_BASE	0xfe4c0000	/* The real name is SCIF3 */
+#define SCIF2_BASE	0xfe4d0000	/* The real name is SCIF4 */
+
+/* SerMux */
+#define SMR0		0xfe470000
+
+/* TMU0 */
+#define TSTR		0xFE430004
+#define TOCR		0xFE430000
+#define TSTR0		0xFE430004
+#define TCOR0		0xFE430008
+#define TCNT0		0xFE43000C
+#define TCR0		0xFE430010
+#define TCOR1		0xFE430014
+#define TCNT1		0xFE430018
+#define TCR1		0xFE43001C
+#define TCOR2		0xFE430020
+#define TCNT2		0xFE430024
+#define TCR2		0xFE430028
+#define TCPR2		0xFE43002C
+
+/* ETHER, GETHER MAC address */
+struct ether_mac_regs {
+	unsigned int	reserved[114];
+	unsigned int	mahr;
+	unsigned int	reserved2;
+	unsigned int	malr;
+};
+#define GETHER0_MAC_BASE	((struct ether_mac_regs *)0xfee0400)
+#define GETHER1_MAC_BASE	((struct ether_mac_regs *)0xfee0c00)
+#define ETHER0_MAC_BASE		((struct ether_mac_regs *)0xfef0000)
+#define ETHER1_MAC_BASE		((struct ether_mac_regs *)0xfef0800)
+
+/* GETHER */
+struct gether_control_regs {
+	unsigned int	gbecont;
+};
+#define GETHER_CONTROL_BASE	((struct gether_control_regs *)0xffc10100)
+#define GBECONT_RMII1		0x00020000
+#define GBECONT_RMII0		0x00010000
+
+/* USB0/1 */
+struct usb_common_regs {
+	unsigned short	reserved[129];
+	unsigned short	suspmode;
+};
+#define USB0_COMMON_BASE	((struct usb_common_regs *)0xfe450000)
+#define USB1_COMMON_BASE	((struct usb_common_regs *)0xfe4f0000)
+
+struct usb0_phy_regs {
+	unsigned short	reset;
+	unsigned short	reserved[4];
+	unsigned short	portsel;
+};
+#define USB0_PHY_BASE		((struct usb0_phy_regs *)0xfe5f0000)
+
+struct usb1_port_regs {
+	unsigned int	port1sel;
+	unsigned int	reserved;
+	unsigned int	usb1intsts;
+};
+#define USB1_PORT_BASE		((struct usb1_port_regs *)0xfe4f2000)
+
+struct usb1_alignment_regs {
+	unsigned int	ehcidatac;	/* 0xfe4fe018 */
+	unsigned int	reserved[63];
+	unsigned int	ohcidatac;
+};
+#define USB1_ALIGNMENT_BASE	((struct usb1_alignment_regs *)0xfe4fe018)
+
+/* GCTRL, GRA */
+struct gctrl_regs {
+	unsigned int	wprotect;
+	unsigned int	gplldiv;
+	unsigned int	gracr2;		/* GRA */
+	unsigned int	gracr3;		/* GRA */
+	unsigned int	reserved[4];
+	unsigned int	fcntcr1;
+	unsigned int	fcntcr2;
+	unsigned int	reserved2[2];
+	unsigned int	gpll1div;
+	unsigned int	vcompsel;
+	unsigned int	reserved3[62];
+	unsigned int	fdlmon;
+	unsigned int	reserved4[2];
+	unsigned int	flcrmon;
+	unsigned int	reserved5[944];
+	unsigned int	spibootcan;
+};
+#define GCTRL_BASE		((struct gctrl_regs *)0xffc10000)
+
+/* PCIe setup */
+struct pcie_setup_regs {
+	unsigned int	pbictl0;
+	unsigned int	gradevctl;
+	unsigned int	reserved[2];
+	unsigned int	bmcinf[6];
+	unsigned int	reserved2[118];
+	unsigned int	idset[2];
+	unsigned int	subidset;
+	unsigned int	reserved3[2];
+	unsigned int	linkconfset[4];
+	unsigned int	trsid;
+	unsigned int	reserved4[6];
+	unsigned int	toutset;
+	unsigned int	reserved5[7];
+	unsigned int	lad0;
+	unsigned int	ladmsk0;
+	unsigned int	lad1;
+	unsigned int	ladmsk1;
+	unsigned int	lad2;
+	unsigned int	ladmsk2;
+	unsigned int	lad3;
+	unsigned int	ladmsk3;
+	unsigned int	lad4;
+	unsigned int	ladmsk4;
+	unsigned int	lad5;
+	unsigned int	ladmsk5;
+	unsigned int	reserved6[94];
+	unsigned int	vdmrxvid[2];
+	unsigned int	reserved7;
+	unsigned int	pbiintfr;
+	unsigned int	pbiinten;
+	unsigned int	msimap;
+	unsigned int	barmap;
+	unsigned int	baracsize;
+	unsigned int	advserest;
+	unsigned int	pbictl3;
+	unsigned int	reserved8[8];
+	unsigned int	pbictl1;
+	unsigned int	scratch0;
+	unsigned int	reserved9[6];
+	unsigned int	pbictl2;
+	unsigned int	reserved10;
+	unsigned int	pbirev;
+};
+#define PCIE_SETUP_BASE		((struct pcie_setup_regs *)0xffca1000)
+
+struct pcie_system_bus_regs {
+	unsigned int	reserved[3];
+	unsigned int	endictl0;
+	unsigned int	endictl1;
+};
+#define PCIE_SYSTEM_BUS_BASE	((struct pcie_system_bus_regs *)0xffca1600)
+
+
+/* PCIe-Bridge */
+struct pciebrg_regs {
+	unsigned short	ctrl_h8s;
+	unsigned short	reserved[7];
+	unsigned short	cp_addr;
+	unsigned short	reserved2;
+	unsigned short	cp_data;
+	unsigned short	reserved3;
+	unsigned short	cp_ctrl;
+};
+#define PCIEBRG_BASE		((struct pciebrg_regs *)0xffd60000)
+
+/* CPU version */
+#define CCN_PRR			0xff000044
+#define prr_mask(_val)		((_val >> 4) & 0xff)
+#define PRR_SH7757_B0		0x10
+#define PRR_SH7757_C0		0x11
+
+#define is_sh7757_b0(_val)						\
+({									\
+	int __ret = prr_mask(__raw_readl(CCN_PRR)) == PRR_SH7757_B0;	\
+	__ret;								\
+})
+#endif	/* ifndef __ASSEMBLY__ */
+
+#endif	/* _ASM_CPU_SH7757_H_ */
diff --git a/board/espt/config.mk b/board/espt/config.mk
deleted file mode 100644
index 21b51de..0000000
--- a/board/espt/config.mk
+++ /dev/null
@@ -1,9 +0,0 @@
-#
-# board/espt/config.mk
-#
-# CONFIG_SYS_TEXT_BASE refers to image _after_ relocation.
-#
-# NOTE: Must match value used in u-boot.lds (in this directory).
-#
-
-CONFIG_SYS_TEXT_BASE = 0x8FFC0000
diff --git a/board/mpr2/config.mk b/board/mpr2/config.mk
deleted file mode 100644
index 4a4bca1..0000000
--- a/board/mpr2/config.mk
+++ /dev/null
@@ -1,37 +0,0 @@
-#
-# Copyright (C) 2007
-# Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
-#
-# Copyright (C) 2007
-# Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
-#
-# Copyright (C) 2007
-# Kenati Technologies, Inc.
-#
-# Copyright (C) 2008
-# Mark Jonas <mark.jonas@de.bosch.com>
-#
-# board/mpr2/config.mk
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-
-#
-# CONFIG_SYS_TEXT_BASE refers to image _after_ relocation.
-#
-# NOTE: Must match value used in u-boot.lds (in this directory).
-#
-
-CONFIG_SYS_TEXT_BASE = 0x8FFC0000
diff --git a/board/ms7720se/config.mk b/board/ms7720se/config.mk
deleted file mode 100644
index d2944a6..0000000
--- a/board/ms7720se/config.mk
+++ /dev/null
@@ -1,34 +0,0 @@
-#
-# Copyright (C) 2007
-# Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
-#
-# Copyright (C) 2007
-# Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
-#
-# Copyright (C) 2007
-# Kenati Technologies, Inc.
-#
-# board/ms7720se/config.mk
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-
-#
-# CONFIG_SYS_TEXT_BASE refers to image _after_ relocation.
-#
-# NOTE: Must match value used in u-boot.lds (in this directory).
-#
-
-CONFIG_SYS_TEXT_BASE = 0x8FFC0000
diff --git a/board/ms7722se/config.mk b/board/ms7722se/config.mk
deleted file mode 100644
index 3f1606b..0000000
--- a/board/ms7722se/config.mk
+++ /dev/null
@@ -1,31 +0,0 @@
-#
-# Copyright (C) 2007
-# Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
-#
-# Copyright (C) 2007
-# Kenati Technologies, Inc.
-#
-# board/ms7722se/config.mk
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-
-#
-# CONFIG_SYS_TEXT_BASE refers to image _after_ relocation.
-#
-# NOTE: Must match value used in u-boot.lds (in this directory).
-#
-
-CONFIG_SYS_TEXT_BASE = 0x8FFC0000
diff --git a/board/ms7750se/config.mk b/board/ms7750se/config.mk
deleted file mode 100644
index ba4d155..0000000
--- a/board/ms7750se/config.mk
+++ /dev/null
@@ -1,23 +0,0 @@
-#
-# Copyright (C) 2007
-# Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-#
-# NOTE: Must match value used in u-boot.lds (in this directory).
-#
-CONFIG_SYS_TEXT_BASE = 0x8FFC0000
diff --git a/board/renesas/ap325rxa/config.mk b/board/renesas/ap325rxa/config.mk
deleted file mode 100644
index f572afd..0000000
--- a/board/renesas/ap325rxa/config.mk
+++ /dev/null
@@ -1,26 +0,0 @@
-#
-# Copyright (C) 2007
-# Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-
-#
-# CONFIG_SYS_TEXT_BASE refers to image _after_ relocation.
-#
-# NOTE: Must match value used in u-boot.lds (in this directory).
-#
-
-CONFIG_SYS_TEXT_BASE = 0x8FFC0000
diff --git a/board/renesas/r2dplus/config.mk b/board/renesas/r2dplus/config.mk
deleted file mode 100644
index 55163b9..0000000
--- a/board/renesas/r2dplus/config.mk
+++ /dev/null
@@ -1,23 +0,0 @@
-#
-# Copyright (C) 2007,2008
-# Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-#
-# NOTE: Must match value used in u-boot.lds (in this directory).
-#
-CONFIG_SYS_TEXT_BASE = 0x0FFC0000
diff --git a/board/renesas/r7780mp/config.mk b/board/renesas/r7780mp/config.mk
deleted file mode 100644
index 70ee3fd..0000000
--- a/board/renesas/r7780mp/config.mk
+++ /dev/null
@@ -1,27 +0,0 @@
-#
-# Copyright (C) 2007,2008 Nobuhiro Iwamatsu
-#
-# board/r77870mp/config.mk
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-
-#
-# CONFIG_SYS_TEXT_BASE refers to image _after_ relocation.
-#
-# NOTE: Must match value used in u-boot.lds (in this directory).
-#
-
-CONFIG_SYS_TEXT_BASE = 0x0FFC0000
diff --git a/board/renesas/rsk7203/config.mk b/board/renesas/rsk7203/config.mk
deleted file mode 100644
index 5b533f6..0000000
--- a/board/renesas/rsk7203/config.mk
+++ /dev/null
@@ -1,28 +0,0 @@
-#
-# Copyright (C) 2007,2008 Nobuhiro Iwamatsu
-# Copyright (C) 2008 Renesas Solutions Corp.
-#
-# u-boot/board/rsk7203/config.mk
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-
-#
-# CONFIG_SYS_TEXT_BASE refers to image _after_ relocation.
-#
-# NOTE: Must match value used in u-boot.lds (in this directory).
-#
-
-CONFIG_SYS_TEXT_BASE = 0x0C7C0000
diff --git a/board/renesas/MigoR/config.mk b/board/renesas/sh7757lcr/Makefile
index ffe954c..e2e46ba 100644
--- a/board/renesas/MigoR/config.mk
+++ b/board/renesas/sh7757lcr/Makefile
@@ -1,11 +1,5 @@
 #
-# Copyright (C) 2007
-# Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
-#
-# Copyright (C) 2007
-# Kenati Technologies, Inc.
-#
-# board/MigoR/config.mk
+# Copyright (C) 2011  Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
 #
 # This program is free software; you can redistribute it and/or
 # modify it under the terms of the GNU General Public License as
@@ -22,10 +16,28 @@
 # Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 # MA 02111-1307 USA
 
-#
-# CONFIG_SYS_TEXT_BASE refers to image _after_ relocation.
-#
-# NOTE: Must match value used in u-boot.lds (in this directory).
-#
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).o
+
+COBJS	:= sh7757lcr.o spi-boot.o
+SOBJS	:= lowlevel_init.o
+
+$(LIB):	$(obj).depend $(COBJS) $(SOBJS)
+	$(call cmd_link_o_target, $(COBJS) $(SOBJS))
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
 
-CONFIG_SYS_TEXT_BASE = 0x8FFC0000
diff --git a/board/renesas/sh7757lcr/lowlevel_init.S b/board/renesas/sh7757lcr/lowlevel_init.S
new file mode 100644
index 0000000..ab1aa49
--- /dev/null
+++ b/board/renesas/sh7757lcr/lowlevel_init.S
@@ -0,0 +1,558 @@
+/*
+ * Copyright (C) 2011  Renesas Solutions Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <version.h>
+#include <asm/processor.h>
+#include <asm/macro.h>
+
+.macro	or32, addr, data
+	mov.l \addr, r1
+	mov.l \data, r0
+	mov.l @r1, r2
+	or    r2, r0
+	mov.l r0, @r1
+.endm
+
+.macro	wait_DBCMD
+	mov.l	DBWAIT_A, r0
+	mov.l	@r0, r1
+.endm
+
+	.global lowlevel_init
+	.section	.spiboot1.text
+	.align  2
+
+lowlevel_init:
+
+	/*------- GPIO -------*/
+	write8 PGDR_A,	PGDR_D	/* eMMC power off */
+
+	write16 PACR_A,	PACR_D
+	write16 PBCR_A,	PBCR_D
+	write16 PCCR_A,	PCCR_D
+	write16 PDCR_A,	PDCR_D
+	write16 PECR_A,	PECR_D
+	write16 PFCR_A,	PFCR_D
+	write16 PGCR_A,	PGCR_D
+	write16 PHCR_A,	PHCR_D
+	write16 PICR_A,	PICR_D
+	write16 PJCR_A,	PJCR_D
+	write16 PKCR_A,	PKCR_D
+	write16 PLCR_A,	PLCR_D
+	write16 PMCR_A,	PMCR_D
+	write16 PNCR_A,	PNCR_D
+	write16 POCR_A,	POCR_D
+	write16 PQCR_A,	PQCR_D
+	write16 PRCR_A,	PRCR_D
+	write16 PSCR_A,	PSCR_D
+	write16 PTCR_A,	PTCR_D
+	write16 PUCR_A,	PUCR_D
+	write16 PVCR_A,	PVCR_D
+	write16 PWCR_A,	PWCR_D
+	write16 PXCR_A,	PXCR_D
+	write16 PYCR_A,	PYCR_D
+	write16 PZCR_A,	PZCR_D
+	write16 PSEL0_A, PSEL0_D
+	write16 PSEL1_A, PSEL1_D
+	write16 PSEL2_A, PSEL2_D
+	write16 PSEL3_A, PSEL3_D
+	write16 PSEL4_A, PSEL4_D
+	write16 PSEL5_A, PSEL5_D
+	write16 PSEL6_A, PSEL6_D
+	write16 PSEL7_A, PSEL7_D
+	write16 PSEL8_A, PSEL8_D
+
+	bra	exit_gpio
+	nop
+
+	.align	4
+
+/*------- GPIO -------*/
+PGDR_A:		.long	0xffec0040
+PACR_A:		.long	0xffec0000
+PBCR_A:		.long	0xffec0002
+PCCR_A:		.long	0xffec0004
+PDCR_A:		.long	0xffec0006
+PECR_A:		.long	0xffec0008
+PFCR_A:		.long	0xffec000a
+PGCR_A:		.long	0xffec000c
+PHCR_A:		.long	0xffec000e
+PICR_A:		.long	0xffec0010
+PJCR_A:		.long	0xffec0012
+PKCR_A:		.long	0xffec0014
+PLCR_A:		.long	0xffec0016
+PMCR_A:		.long	0xffec0018
+PNCR_A:		.long	0xffec001a
+POCR_A:		.long	0xffec001c
+PQCR_A:		.long	0xffec0020
+PRCR_A:		.long	0xffec0022
+PSCR_A:		.long	0xffec0024
+PTCR_A:		.long	0xffec0026
+PUCR_A:		.long	0xffec0028
+PVCR_A:		.long	0xffec002a
+PWCR_A:		.long	0xffec002c
+PXCR_A:		.long	0xffec002e
+PYCR_A:		.long	0xffec0030
+PZCR_A:		.long	0xffec0032
+PSEL0_A:	.long	0xffec0070
+PSEL1_A:	.long	0xffec0072
+PSEL2_A:	.long	0xffec0074
+PSEL3_A:	.long	0xffec0076
+PSEL4_A:	.long	0xffec0078
+PSEL5_A:	.long	0xffec007a
+PSEL6_A:	.long	0xffec007c
+PSEL7_A:	.long	0xffec0082
+PSEL8_A:	.long	0xffec0084
+
+PGDR_D:		.long	0x80
+PACR_D:		.long	0x0000
+PBCR_D:		.long	0x0001
+PCCR_D:		.long	0x0000
+PDCR_D:		.long	0x0000
+PECR_D:		.long	0x0000
+PFCR_D:		.long	0x0000
+PGCR_D:		.long	0x0000
+PHCR_D:		.long	0x0000
+PICR_D:		.long	0x0000
+PJCR_D:		.long	0x0000
+PKCR_D:		.long	0x0003
+PLCR_D:		.long	0x0000
+PMCR_D:		.long	0x0000
+PNCR_D:		.long	0x0000
+POCR_D:		.long	0x0000
+PQCR_D:		.long	0xc000
+PRCR_D:		.long	0x0000
+PSCR_D:		.long	0x0000
+PTCR_D:		.long	0x0000
+#if defined(CONFIG_SH7757_OFFSET_SPI)
+PUCR_D:		.long	0x0055
+#else
+PUCR_D:		.long	0x0000
+#endif
+PVCR_D:		.long	0x0000
+PWCR_D:		.long	0x0000
+PXCR_D:		.long	0x0000
+PYCR_D:		.long	0x0000
+PZCR_D:		.long	0x0000
+PSEL0_D:	.long	0xfe00
+PSEL1_D:	.long	0x0000
+PSEL2_D:	.long	0x3000
+PSEL3_D:	.long	0xff00
+PSEL4_D:	.long	0x771f
+PSEL5_D:	.long	0x0ffc
+PSEL6_D:	.long	0x00ff
+PSEL7_D:	.long	0xfc00
+PSEL8_D:	.long	0x0000
+
+	.align	2
+
+exit_gpio:
+	mov	#0, r14
+	mova	2f, r0
+	mov.l	PC_MASK, r1
+	tst	r0, r1
+	bf	2f
+
+	bra	exit_pmb
+	nop
+
+	.align	2
+
+/* If CPU runs on SDRAM, PC is 0x8???????. */
+PC_MASK:	.long	0x20000000
+
+2:
+	mov	#1, r14
+
+	mov.l	EXPEVT_A, r0
+	mov.l	@r0, r0
+	mov.l	EXPEVT_POWER_ON_RESET, r1
+	cmp/eq	r0, r1
+	bt	1f
+
+	/*
+	 * If EXPEVT value is manual reset or tlb multipul-hit,
+	 * initialization of DDR3IF is not necessary.
+	 */
+	bra	exit_ddr
+	nop
+
+1:
+	/* For Core Reset */
+	mov.l	DBACEN_A, r0
+	mov.l	@r0, r0
+	cmp/eq	#0, r0
+	bt	3f
+
+	/*
+	 * If DBACEN == 1(DBSC was already enabled), we have to avoid the
+	 * initialization of DDR3-SDRAM.
+	 */
+	bra	exit_ddr
+	nop
+
+3:
+	/*------- DDR3IF -------*/
+	/* oscillation stabilization time */
+	wait_timer	WAIT_OSC_TIME
+
+	/* step 3 */
+	write32 DBCMD_A, DBCMD_RSTL_VAL
+	wait_timer	WAIT_30US
+
+	/* step 4 */
+	write32 DBCMD_A, DBCMD_PDEN_VAL
+
+	/* step 5 */
+	write32 DBKIND_A, DBKIND_D
+
+	/* step 6 */
+	write32 DBCONF_A, DBCONF_D
+	write32 DBTR0_A, DBTR0_D
+	write32 DBTR1_A, DBTR1_D
+	write32 DBTR2_A, DBTR2_D
+	write32 DBTR3_A, DBTR3_D
+	write32 DBTR4_A, DBTR4_D
+	write32 DBTR5_A, DBTR5_D
+	write32 DBTR6_A, DBTR6_D
+	write32 DBTR7_A, DBTR7_D
+	write32 DBTR8_A, DBTR8_D
+	write32 DBTR9_A, DBTR9_D
+	write32 DBTR10_A, DBTR10_D
+	write32 DBTR11_A, DBTR11_D
+	write32 DBTR12_A, DBTR12_D
+	write32 DBTR13_A, DBTR13_D
+	write32 DBTR14_A, DBTR14_D
+	write32 DBTR15_A, DBTR15_D
+	write32 DBTR16_A, DBTR16_D
+	write32 DBTR17_A, DBTR17_D
+	write32 DBTR18_A, DBTR18_D
+	write32 DBTR19_A, DBTR19_D
+	write32 DBRNK0_A, DBRNK0_D
+
+	/* step 7 */
+	write32 DBPDCNT3_A, DBPDCNT3_D
+
+	/* step 8 */
+	write32 DBPDCNT1_A, DBPDCNT1_D
+	write32 DBPDCNT2_A, DBPDCNT2_D
+	write32 DBPDLCK_A, DBPDLCK_D
+	write32 DBPDRGA_A, DBPDRGA_D
+	write32 DBPDRGD_A, DBPDRGD_D
+
+	/* step 9 */
+	wait_timer	WAIT_30US
+
+	/* step 10 */
+	write32 DBPDCNT0_A, DBPDCNT0_D
+
+	/* step 11 */
+	wait_timer	WAIT_30US
+	wait_timer	WAIT_30US
+
+	/* step 12 */
+	write32 DBCMD_A, DBCMD_WAIT_VAL
+	wait_DBCMD
+
+	/* step 13 */
+	write32 DBCMD_A, DBCMD_RSTH_VAL
+	wait_DBCMD
+
+	/* step 14 */
+	write32 DBCMD_A, DBCMD_WAIT_VAL
+	write32 DBCMD_A, DBCMD_WAIT_VAL
+	write32 DBCMD_A, DBCMD_WAIT_VAL
+	write32 DBCMD_A, DBCMD_WAIT_VAL
+
+	/* step 15 */
+	write32 DBCMD_A, DBCMD_PDXT_VAL
+
+	/* step 16 */
+	write32 DBCMD_A, DBCMD_MRS2_VAL
+
+	/* step 17 */
+	write32 DBCMD_A, DBCMD_MRS3_VAL
+
+	/* step 18 */
+	write32 DBCMD_A, DBCMD_MRS1_VAL
+
+	/* step 19 */
+	write32 DBCMD_A, DBCMD_MRS0_VAL
+
+	/* step 20 */
+	write32 DBCMD_A, DBCMD_ZQCL_VAL
+
+	write32 DBCMD_A, DBCMD_REF_VAL
+	write32 DBCMD_A, DBCMD_REF_VAL
+	wait_DBCMD
+
+	/* step 21 */
+	write32 DBADJ0_A, DBADJ0_D
+	write32 DBADJ1_A, DBADJ1_D
+	write32 DBADJ2_A, DBADJ2_D
+
+	/* step 22 */
+	write32 DBRFCNF0_A, DBRFCNF0_D
+	write32 DBRFCNF1_A, DBRFCNF1_D
+	write32 DBRFCNF2_A, DBRFCNF2_D
+
+	/* step 23 */
+	write32 DBCALCNF_A, DBCALCNF_D
+
+	/* step 24 */
+	write32 DBRFEN_A, DBRFEN_D
+	write32 DBCMD_A, DBCMD_SRXT_VAL
+
+	/* step 25 */
+	write32 DBACEN_A, DBACEN_D
+
+	/* step 26 */
+	wait_DBCMD
+
+	/* enable DDR-ECC */
+	write32 ECD_ECDEN_A, ECD_ECDEN_D
+	write32 ECD_INTSR_A, ECD_INTSR_D
+	write32 ECD_SPACER_A, ECD_SPACER_D
+	write32 ECD_MCR_A, ECD_MCR_D
+
+	bra	exit_ddr
+	nop
+
+	.align 4
+
+EXPEVT_A:		.long	0xff000024
+EXPEVT_POWER_ON_RESET:	.long	0x00000000
+
+/*------- DDR3IF -------*/
+DBCMD_A:	.long	0xfe800018
+DBKIND_A:	.long	0xfe800020
+DBCONF_A:	.long	0xfe800024
+DBTR0_A:	.long	0xfe800040
+DBTR1_A:	.long	0xfe800044
+DBTR2_A:	.long	0xfe800048
+DBTR3_A:	.long	0xfe800050
+DBTR4_A:	.long	0xfe800054
+DBTR5_A:	.long	0xfe800058
+DBTR6_A:	.long	0xfe80005c
+DBTR7_A:	.long	0xfe800060
+DBTR8_A:	.long	0xfe800064
+DBTR9_A:	.long	0xfe800068
+DBTR10_A:	.long	0xfe80006c
+DBTR11_A:	.long	0xfe800070
+DBTR12_A:	.long	0xfe800074
+DBTR13_A:	.long	0xfe800078
+DBTR14_A:	.long	0xfe80007c
+DBTR15_A:	.long	0xfe800080
+DBTR16_A:	.long	0xfe800084
+DBTR17_A:	.long	0xfe800088
+DBTR18_A:	.long	0xfe80008c
+DBTR19_A:	.long	0xfe800090
+DBRNK0_A:	.long	0xfe800100
+DBPDCNT0_A:	.long	0xfe800200
+DBPDCNT1_A:	.long	0xfe800204
+DBPDCNT2_A:	.long	0xfe800208
+DBPDCNT3_A:	.long	0xfe80020c
+DBPDLCK_A:	.long	0xfe800280
+DBPDRGA_A:	.long	0xfe800290
+DBPDRGD_A:	.long	0xfe8002a0
+DBADJ0_A:	.long	0xfe8000c0
+DBADJ1_A:	.long	0xfe8000c4
+DBADJ2_A:	.long	0xfe8000c8
+DBRFCNF0_A:	.long	0xfe8000e0
+DBRFCNF1_A:	.long	0xfe8000e4
+DBRFCNF2_A:	.long	0xfe8000e8
+DBCALCNF_A:	.long	0xfe8000f4
+DBRFEN_A:	.long	0xfe800014
+DBACEN_A:	.long	0xfe800010
+DBWAIT_A:	.long	0xfe80001c
+
+WAIT_OSC_TIME:	.long	6000
+WAIT_30US:	.long	13333
+
+DBCMD_RSTL_VAL:	.long	0x20000000
+DBCMD_PDEN_VAL:	.long	0x1000d73c
+DBCMD_WAIT_VAL:	.long	0x0000d73c
+DBCMD_RSTH_VAL:	.long	0x2100d73c
+DBCMD_PDXT_VAL:	.long	0x110000c8
+DBCMD_MRS0_VAL:	.long	0x28000930
+DBCMD_MRS1_VAL:	.long	0x29000004
+DBCMD_MRS2_VAL:	.long	0x2a000008
+DBCMD_MRS3_VAL:	.long	0x2b000000
+DBCMD_ZQCL_VAL:	.long	0x03000200
+DBCMD_REF_VAL:	.long	0x0c000000
+DBCMD_SRXT_VAL:	.long	0x19000000
+DBKIND_D:	.long	0x00000007
+DBCONF_D:	.long	0x0f030a01
+DBTR0_D:	.long	0x00000007
+DBTR1_D:	.long	0x00000006
+DBTR2_D:	.long	0x00000000
+DBTR3_D:	.long	0x00000007
+DBTR4_D:	.long	0x00070007
+DBTR5_D:	.long	0x0000001b
+DBTR6_D:	.long	0x00000014
+DBTR7_D:	.long	0x00000005
+DBTR8_D:	.long	0x00000015
+DBTR9_D:	.long	0x00000006
+DBTR10_D:	.long	0x00000008
+DBTR11_D:	.long	0x00000007
+DBTR12_D:	.long	0x0000000e
+DBTR13_D:	.long	0x00000056
+DBTR14_D:	.long	0x00000006
+DBTR15_D:	.long	0x00000004
+DBTR16_D:	.long	0x00150002
+DBTR17_D:	.long	0x000c0017
+DBTR18_D:	.long	0x00000200
+DBTR19_D:	.long	0x00000040
+DBRNK0_D:	.long	0x00000001
+DBPDCNT0_D:	.long	0x00000001
+DBPDCNT1_D:	.long	0x00000001
+DBPDCNT2_D:	.long	0x00000000
+DBPDCNT3_D:	.long	0x00004010
+DBPDLCK_D:	.long	0x0000a55a
+DBPDRGA_D:	.long	0x00000028
+DBPDRGD_D:	.long	0x00017100
+
+DBADJ0_D:	.long	0x00000000
+DBADJ1_D:	.long	0x00000000
+DBADJ2_D:	.long	0x18061806
+DBRFCNF0_D:	.long	0x000001ff
+DBRFCNF1_D:	.long	0x08001000
+DBRFCNF2_D:	.long	0x00000000
+DBCALCNF_D:	.long	0x0000ffff
+DBRFEN_D:	.long	0x00000001
+DBACEN_D:	.long	0x00000001
+
+/*------- DDR-ECC -------*/
+ECD_ECDEN_A:	.long	0xffc1012c
+ECD_ECDEN_D:	.long	0x00000001
+ECD_INTSR_A:	.long	0xfe900024
+ECD_INTSR_D:	.long	0xffffffff
+ECD_SPACER_A:	.long	0xfe900018
+ECD_SPACER_D:	.long	SH7757LCR_SDRAM_ECC_SETTING
+ECD_MCR_A:	.long	0xfe900010
+ECD_MCR_D:	.long	0x00000001
+
+	.align 2
+exit_ddr:
+
+#if defined(CONFIG_SH_32BIT)
+	/*------- set PMB -------*/
+	write32	PASCR_A,	PASCR_29BIT_D
+	write32	MMUCR_A,	MMUCR_D
+
+	/*****************************************************************
+	 * ent	virt		phys		v	sz	c	wt
+	 * 0	0xa0000000	0x00000000	1	128M	0	1
+	 * 1	0xa8000000	0x48000000	1	128M	0	1
+	 * 5	0x88000000	0x48000000	1	128M	1	1
+	 */
+	write32	PMB_ADDR_SPIBOOT_A,	PMB_ADDR_SPIBOOT_D
+	write32	PMB_DATA_SPIBOOT_A,	PMB_DATA_SPIBOOT_D
+	write32	PMB_ADDR_DDR_C1_A,	PMB_ADDR_DDR_C1_D
+	write32	PMB_DATA_DDR_C1_A,	PMB_DATA_DDR_C1_D
+	write32	PMB_ADDR_DDR_N1_A,	PMB_ADDR_DDR_N1_D
+	write32	PMB_DATA_DDR_N1_A,	PMB_DATA_DDR_N1_D
+
+	write32	PMB_ADDR_ENTRY2,	PMB_ADDR_NOT_USE_D
+	write32	PMB_ADDR_ENTRY3,	PMB_ADDR_NOT_USE_D
+	write32	PMB_ADDR_ENTRY4,	PMB_ADDR_NOT_USE_D
+	write32	PMB_ADDR_ENTRY6,	PMB_ADDR_NOT_USE_D
+	write32	PMB_ADDR_ENTRY7,	PMB_ADDR_NOT_USE_D
+	write32	PMB_ADDR_ENTRY8,	PMB_ADDR_NOT_USE_D
+	write32	PMB_ADDR_ENTRY9,	PMB_ADDR_NOT_USE_D
+	write32	PMB_ADDR_ENTRY10,	PMB_ADDR_NOT_USE_D
+	write32	PMB_ADDR_ENTRY11,	PMB_ADDR_NOT_USE_D
+	write32	PMB_ADDR_ENTRY12,	PMB_ADDR_NOT_USE_D
+	write32	PMB_ADDR_ENTRY13,	PMB_ADDR_NOT_USE_D
+	write32	PMB_ADDR_ENTRY14,	PMB_ADDR_NOT_USE_D
+	write32	PMB_ADDR_ENTRY15,	PMB_ADDR_NOT_USE_D
+
+	write32	PASCR_A,	PASCR_INIT
+	mov.l	DUMMY_ADDR, r0
+	icbi	@r0
+#endif	/* if defined(CONFIG_SH_32BIT) */
+
+exit_pmb:
+	/* CPU is running on ILRAM? */
+	mov	r14, r0
+	tst	#1, r0
+	bt	1f
+
+	mov.l	_bss_start, r15
+	mov.l	_spiboot_main, r0
+100:	bsrf	r0
+	nop
+
+	.align	2
+_spiboot_main:	.long	(spiboot_main - (100b + 4))
+_bss_start:	.long	bss_start
+
+1:
+
+	write32	CCR_A,	CCR_D
+
+	rts
+	 nop
+
+	.align 4
+
+#if defined(CONFIG_SH_32BIT)
+/*------- set PMB -------*/
+PMB_ADDR_SPIBOOT_A:	.long	PMB_ADDR_BASE(0)
+PMB_ADDR_DDR_N1_A:	.long	PMB_ADDR_BASE(1)
+PMB_ADDR_DDR_C1_A:	.long	PMB_ADDR_BASE(5)
+PMB_ADDR_ENTRY2:	.long	PMB_ADDR_BASE(2)
+PMB_ADDR_ENTRY3:	.long	PMB_ADDR_BASE(3)
+PMB_ADDR_ENTRY4:	.long	PMB_ADDR_BASE(4)
+PMB_ADDR_ENTRY6:	.long	PMB_ADDR_BASE(6)
+PMB_ADDR_ENTRY7:	.long	PMB_ADDR_BASE(7)
+PMB_ADDR_ENTRY8:	.long	PMB_ADDR_BASE(8)
+PMB_ADDR_ENTRY9:	.long	PMB_ADDR_BASE(9)
+PMB_ADDR_ENTRY10:	.long	PMB_ADDR_BASE(10)
+PMB_ADDR_ENTRY11:	.long	PMB_ADDR_BASE(11)
+PMB_ADDR_ENTRY12:	.long	PMB_ADDR_BASE(12)
+PMB_ADDR_ENTRY13:	.long	PMB_ADDR_BASE(13)
+PMB_ADDR_ENTRY14:	.long	PMB_ADDR_BASE(14)
+PMB_ADDR_ENTRY15:	.long	PMB_ADDR_BASE(15)
+
+PMB_ADDR_SPIBOOT_D:	.long	mk_pmb_addr_val(0xa0)
+PMB_ADDR_DDR_C1_D:	.long	mk_pmb_addr_val(0x88)
+PMB_ADDR_DDR_N1_D:	.long	mk_pmb_addr_val(0xa8)
+PMB_ADDR_NOT_USE_D:	.long	0x00000000
+
+PMB_DATA_SPIBOOT_A:	.long	PMB_DATA_BASE(0)
+PMB_DATA_DDR_N1_A:	.long	PMB_DATA_BASE(1)
+PMB_DATA_DDR_C1_A:	.long	PMB_DATA_BASE(5)
+
+/*						ppn   ub v s1 s0  c  wt */
+PMB_DATA_SPIBOOT_D:	.long	mk_pmb_data_val(0x00, 0, 1, 1, 0, 0, 1)
+PMB_DATA_DDR_C1_D:	.long	mk_pmb_data_val(0x48, 0, 1, 1, 0, 1, 1)
+PMB_DATA_DDR_N1_D:	.long	mk_pmb_data_val(0x48, 1, 1, 1, 0, 0, 1)
+
+PASCR_A:		.long	0xff000070
+DUMMY_ADDR:		.long	0xa0000000
+PASCR_29BIT_D:		.long	0x00000000
+PASCR_INIT:		.long	0x80000080
+MMUCR_A:		.long	0xff000010
+MMUCR_D:		.long	0x00000004	/* clear ITLB */
+#endif	/* CONFIG_SH_32BIT */
+
+CCR_A:		.long	CCR
+CCR_D:		.long	CCR_CACHE_INIT
diff --git a/board/renesas/sh7757lcr/sh7757lcr.c b/board/renesas/sh7757lcr/sh7757lcr.c
new file mode 100644
index 0000000..a62be24
--- /dev/null
+++ b/board/renesas/sh7757lcr/sh7757lcr.c
@@ -0,0 +1,454 @@
+/*
+ * Copyright (C) 2011  Renesas Solutions Corp.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <spi_flash.h>
+
+int checkboard(void)
+{
+	puts("BOARD: R0P7757LC0030RL board\n");
+
+	return 0;
+}
+
+static void init_gctrl(void)
+{
+	struct gctrl_regs *gctrl = GCTRL_BASE;
+	unsigned long graofst;
+
+	graofst = (SH7757LCR_SDRAM_PHYS_TOP + SH7757LCR_GRA_OFFSET) >> 24;
+	writel(graofst | 0x20000f00, &gctrl->gracr3);
+}
+
+static int init_pcie_bridge_from_spi(void *buf, size_t size)
+{
+	struct spi_flash *spi;
+	int ret;
+	unsigned long pcie_addr;
+
+	spi = spi_flash_probe(0, 0, 1000000, SPI_MODE_3);
+	if (!spi) {
+		printf("%s: spi_flash probe error.\n", __func__);
+		return 1;
+	}
+
+	if (is_sh7757_b0())
+		pcie_addr = SH7757LCR_PCIEBRG_ADDR_B0;
+	else
+		pcie_addr = SH7757LCR_PCIEBRG_ADDR;
+
+	ret = spi_flash_read(spi, pcie_addr, size, buf);
+	if (ret) {
+		printf("%s: spi_flash read error.\n", __func__);
+		spi_flash_free(spi);
+		return 1;
+	}
+	spi_flash_free(spi);
+
+	return 0;
+}
+
+static void init_pcie_bridge(void)
+{
+	struct pciebrg_regs *pciebrg = PCIEBRG_BASE;
+	struct pcie_setup_regs *pcie_setup = PCIE_SETUP_BASE;
+	int i;
+	unsigned char *data;
+	unsigned short tmp;
+	unsigned long pcie_size;
+
+	if (!(readw(&pciebrg->ctrl_h8s) & 0x0001))
+		return;
+
+	if (is_sh7757_b0())
+		pcie_size = SH7757LCR_PCIEBRG_SIZE_B0;
+	else
+		pcie_size = SH7757LCR_PCIEBRG_SIZE;
+
+	data = malloc(pcie_size);
+	if (!data) {
+		printf("%s: malloc error.\n", __func__);
+		return;
+	}
+	if (init_pcie_bridge_from_spi(data, pcie_size)) {
+		free(data);
+		return;
+	}
+
+	if (data[0] == 0xff && data[1] == 0xff && data[2] == 0xff &&
+	    data[3] == 0xff) {
+		free(data);
+		printf("%s: skipped initialization\n", __func__);
+		return;
+	}
+
+	writew(0xa501, &pciebrg->ctrl_h8s);	/* reset */
+	writew(0x0000, &pciebrg->cp_ctrl);
+	writew(0x0000, &pciebrg->cp_addr);
+
+	for (i = 0; i < pcie_size; i += 2) {
+		tmp = (data[i] << 8) | data[i + 1];
+		writew(tmp, &pciebrg->cp_data);
+	}
+
+	writew(0xa500, &pciebrg->ctrl_h8s);	/* start */
+	if (!is_sh7757_b0())
+		writel(0x00000001, &pcie_setup->pbictl3);
+
+	free(data);
+}
+
+static void init_usb_phy(void)
+{
+	struct usb_common_regs *common0 = USB0_COMMON_BASE;
+	struct usb_common_regs *common1 = USB1_COMMON_BASE;
+	struct usb0_phy_regs *phy = USB0_PHY_BASE;
+	struct usb1_port_regs *port = USB1_PORT_BASE;
+	struct usb1_alignment_regs *align = USB1_ALIGNMENT_BASE;
+
+	writew(0x0100, &phy->reset);		/* set reset */
+	/* port0 = USB0, port1 = USB1 */
+	writew(0x0002, &phy->portsel);
+	writel(0x0001, &port->port1sel);	/* port1 = Host */
+	writew(0x0111, &phy->reset);		/* clear reset */
+
+	writew(0x4000, &common0->suspmode);
+	writew(0x4000, &common1->suspmode);
+
+#if defined(__LITTLE_ENDIAN)
+	writel(0x00000000, &align->ehcidatac);
+	writel(0x00000000, &align->ohcidatac);
+#endif
+}
+
+static void set_mac_to_sh_eth_register(int channel, char *mac_string)
+{
+	struct ether_mac_regs *ether;
+	unsigned char mac[6];
+	unsigned long val;
+
+	eth_parse_enetaddr(mac_string, mac);
+
+	if (!channel)
+		ether = ETHER0_MAC_BASE;
+	else
+		ether = ETHER1_MAC_BASE;
+
+	val = (mac[0] << 24) | (mac[1] << 16) | (mac[2] << 8) | mac[3];
+	writel(val, &ether->mahr);
+	val = (mac[4] << 8) | mac[5];
+	writel(val, &ether->malr);
+}
+
+static void set_mac_to_sh_giga_eth_register(int channel, char *mac_string)
+{
+	struct ether_mac_regs *ether;
+	unsigned char mac[6];
+	unsigned long val;
+
+	eth_parse_enetaddr(mac_string, mac);
+
+	if (!channel)
+		ether = GETHER0_MAC_BASE;
+	else
+		ether = GETHER1_MAC_BASE;
+
+	val = (mac[0] << 24) | (mac[1] << 16) | (mac[2] << 8) | mac[3];
+	writel(val, &ether->mahr);
+	val = (mac[4] << 8) | mac[5];
+	writel(val, &ether->malr);
+}
+
+/*****************************************************************
+ * This PMB must be set on this timing. The lowlevel_init is run on
+ * Area 0(phys 0x00000000), so we have to map it.
+ *
+ * The new PMB table is following:
+ * ent	virt		phys		v	sz	c	wt
+ * 0	0xa0000000	0x40000000	1	128M	0	1
+ * 1	0xa8000000	0x48000000	1	128M	0	1
+ * 2	0xb0000000	0x50000000	1	128M	0	1
+ * 3	0xb8000000	0x58000000	1	128M	0	1
+ * 4	0x80000000	0x40000000	1	128M	1	1
+ * 5	0x88000000	0x48000000	1	128M	1	1
+ * 6	0x90000000	0x50000000	1	128M	1	1
+ * 7	0x98000000	0x58000000	1	128M	1	1
+ */
+static void set_pmb_on_board_init(void)
+{
+	struct mmu_regs *mmu = MMU_BASE;
+
+	/* clear ITLB */
+	writel(0x00000004, &mmu->mmucr);
+
+	/* delete PMB for SPIBOOT */
+	writel(0, PMB_ADDR_BASE(0));
+	writel(0, PMB_DATA_BASE(0));
+
+	/* add PMB for SDRAM(0x40000000 - 0x47ffffff) */
+	/*			ppn  ub v s1 s0  c  wt */
+	writel(mk_pmb_addr_val(0xa0), PMB_ADDR_BASE(0));
+	writel(mk_pmb_data_val(0x40, 1, 1, 1, 0, 0, 1), PMB_DATA_BASE(0));
+	writel(mk_pmb_addr_val(0xb0), PMB_ADDR_BASE(2));
+	writel(mk_pmb_data_val(0x50, 1, 1, 1, 0, 0, 1), PMB_DATA_BASE(2));
+	writel(mk_pmb_addr_val(0xb8), PMB_ADDR_BASE(3));
+	writel(mk_pmb_data_val(0x58, 1, 1, 1, 0, 0, 1), PMB_DATA_BASE(3));
+	writel(mk_pmb_addr_val(0x80), PMB_ADDR_BASE(4));
+	writel(mk_pmb_data_val(0x40, 0, 1, 1, 0, 1, 1), PMB_DATA_BASE(4));
+	writel(mk_pmb_addr_val(0x90), PMB_ADDR_BASE(6));
+	writel(mk_pmb_data_val(0x50, 0, 1, 1, 0, 1, 1), PMB_DATA_BASE(6));
+	writel(mk_pmb_addr_val(0x98), PMB_ADDR_BASE(7));
+	writel(mk_pmb_data_val(0x58, 0, 1, 1, 0, 1, 1), PMB_DATA_BASE(7));
+}
+
+int board_init(void)
+{
+	struct gether_control_regs *gether = GETHER_CONTROL_BASE;
+
+	set_pmb_on_board_init();
+
+	/* enable RMII's MDIO (disable GRMII's MDIO) */
+	writel(0x00030000, &gether->gbecont);
+
+	init_gctrl();
+	init_usb_phy();
+
+	return 0;
+}
+
+int dram_init(void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	gd->bd->bi_memstart = CONFIG_SYS_SDRAM_BASE;
+	gd->bd->bi_memsize = CONFIG_SYS_SDRAM_SIZE;
+	printf("DRAM:  %dMB\n", CONFIG_SYS_SDRAM_SIZE / (1024 * 1024));
+	printf("    Physical address\n");
+	printf("    0x%08x - 0x%08x : Accessible Space as ECC Area\n",
+		SH7757LCR_SDRAM_PHYS_TOP,
+		SH7757LCR_SDRAM_PHYS_TOP + SH7757LCR_SDRAM_SIZE - 1);
+	printf("    0x%08x - 0x%08x : No Access Area\n",
+		SH7757LCR_SDRAM_PHYS_TOP + SH7757LCR_SDRAM_SIZE,
+		SH7757LCR_SDRAM_PHYS_TOP + SH7757LCR_SDRAM_SIZE * 2 - 1);
+	printf("    0x%08x - 0x%08x : Non-ECC Area for DVC/AVC\n",
+		SH7757LCR_SDRAM_PHYS_TOP + SH7757LCR_SDRAM_ECC_SETTING * 2,
+		SH7757LCR_SDRAM_PHYS_TOP + SH7757LCR_SDRAM_ECC_SETTING * 2 +
+			SH7757LCR_SDRAM_DVC_SIZE - 1);
+	printf("    0x%08x - 0x%08x : Non-ECC Area for G200eR2\n",
+		SH7757LCR_SDRAM_PHYS_TOP + SH7757LCR_GRA_OFFSET,
+		SH7757LCR_SDRAM_PHYS_TOP + SH7757LCR_GRA_OFFSET + 0x00ffffff);
+
+	return 0;
+}
+
+static int get_sh_eth_mac_raw(unsigned char *buf, int size)
+{
+	struct spi_flash *spi;
+	int ret;
+
+	spi = spi_flash_probe(0, 0, 1000000, SPI_MODE_3);
+	if (spi == NULL) {
+		printf("%s: spi_flash probe error.\n", __func__);
+		return 1;
+	}
+
+	ret = spi_flash_read(spi, SH7757LCR_ETHERNET_MAC_BASE, size, buf);
+	if (ret) {
+		printf("%s: spi_flash read error.\n", __func__);
+		spi_flash_free(spi);
+		return 1;
+	}
+	spi_flash_free(spi);
+
+	return 0;
+}
+
+static int get_sh_eth_mac(int channel, char *mac_string, unsigned char *buf)
+{
+	memcpy(mac_string, &buf[channel * (SH7757LCR_ETHERNET_MAC_SIZE + 1)],
+		SH7757LCR_ETHERNET_MAC_SIZE);
+	mac_string[SH7757LCR_ETHERNET_MAC_SIZE] = 0x00;	/* terminate */
+
+	return 0;
+}
+
+static void init_ethernet_mac(void)
+{
+	char mac_string[64];
+	char env_string[64];
+	int i;
+	unsigned char *buf;
+
+	buf = malloc(256);
+	if (!buf) {
+		printf("%s: malloc error.\n", __func__);
+		return;
+	}
+	get_sh_eth_mac_raw(buf, 256);
+
+	/* Fast Ethernet */
+	for (i = 0; i < SH7757LCR_ETHERNET_NUM_CH; i++) {
+		get_sh_eth_mac(i, mac_string, buf);
+		if (i == 0)
+			setenv("ethaddr", mac_string);
+		else {
+			sprintf(env_string, "eth%daddr", i);
+			setenv(env_string, mac_string);
+		}
+
+		set_mac_to_sh_eth_register(i, mac_string);
+	}
+
+	/* Gigabit Ethernet */
+	for (i = 0; i < SH7757LCR_GIGA_ETHERNET_NUM_CH; i++) {
+		get_sh_eth_mac(i + SH7757LCR_ETHERNET_NUM_CH, mac_string, buf);
+		sprintf(env_string, "eth%daddr", i + SH7757LCR_ETHERNET_NUM_CH);
+		setenv(env_string, mac_string);
+
+		set_mac_to_sh_giga_eth_register(i, mac_string);
+	}
+
+	free(buf);
+}
+
+static void init_pcie(void)
+{
+	struct pcie_setup_regs *pcie_setup = PCIE_SETUP_BASE;
+	struct pcie_system_bus_regs *pcie_sysbus = PCIE_SYSTEM_BUS_BASE;
+
+	writel(0x00000ff2, &pcie_setup->ladmsk0);
+	writel(0x00000001, &pcie_setup->barmap);
+	writel(0xffcaa000, &pcie_setup->lad0);
+	writel(0x00030000, &pcie_sysbus->endictl0);
+	writel(0x00000003, &pcie_sysbus->endictl1);
+	writel(0x00000004, &pcie_setup->pbictl2);
+}
+
+static void finish_spiboot(void)
+{
+	struct gctrl_regs *gctrl = GCTRL_BASE;
+	/*
+	 *  SH7757 B0 does not use LBSC.
+	 *  So if we set SPIBOOTCAN to 1, SH7757 can not access Area0.
+	 *  This setting is not cleared by manual reset, So we have to set it
+	 *  to 0.
+	 */
+	writel(0x00000000, &gctrl->spibootcan);
+}
+
+int board_late_init(void)
+{
+	init_ethernet_mac();
+	init_pcie_bridge();
+	init_pcie();
+	finish_spiboot();
+
+	return 0;
+}
+
+int do_sh_g200(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+	struct gctrl_regs *gctrl = GCTRL_BASE;
+	unsigned long graofst;
+
+	writel(0xfedcba98, &gctrl->wprotect);
+	graofst = (SH7757LCR_SDRAM_PHYS_TOP + SH7757LCR_GRA_OFFSET) >> 24;
+	writel(graofst | 0xa0000f00, &gctrl->gracr3);
+
+	return 0;
+}
+
+U_BOOT_CMD(
+	sh_g200,	1,	1,	do_sh_g200,
+	"enable sh-g200",
+	"enable SH-G200 bus (disable PCIe-G200)"
+);
+
+int do_write_mac(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+	int i, ret;
+	char mac_string[256];
+	struct spi_flash *spi;
+	unsigned char *buf;
+
+	if (argc != 5) {
+		buf = malloc(256);
+		if (!buf) {
+			printf("%s: malloc error.\n", __func__);
+			return 1;
+		}
+
+		get_sh_eth_mac_raw(buf, 256);
+
+		/* print current MAC address */
+		for (i = 0; i < 4; i++) {
+			get_sh_eth_mac(i, mac_string, buf);
+			if (i < 2)
+				printf(" ETHERC ch%d = %s\n", i, mac_string);
+			else
+				printf("GETHERC ch%d = %s\n", i-2, mac_string);
+		}
+		free(buf);
+		return 0;
+	}
+
+	/* new setting */
+	memset(mac_string, 0xff, sizeof(mac_string));
+	sprintf(mac_string, "%s\t%s\t%s\t%s",
+		argv[1], argv[2], argv[3], argv[4]);
+
+	/* write MAC data to SPI rom */
+	spi = spi_flash_probe(0, 0, 1000000, SPI_MODE_3);
+	if (!spi) {
+		printf("%s: spi_flash probe error.\n", __func__);
+		return 1;
+	}
+
+	ret = spi_flash_erase(spi, SH7757LCR_ETHERNET_MAC_BASE_SPI,
+				SH7757LCR_SPI_SECTOR_SIZE);
+	if (ret) {
+		printf("%s: spi_flash erase error.\n", __func__);
+		return 1;
+	}
+
+	ret = spi_flash_write(spi, SH7757LCR_ETHERNET_MAC_BASE_SPI,
+				sizeof(mac_string), mac_string);
+	if (ret) {
+		printf("%s: spi_flash write error.\n", __func__);
+		spi_flash_free(spi);
+		return 1;
+	}
+	spi_flash_free(spi);
+
+	puts("The writing of the MAC address to SPI ROM was completed.\n");
+
+	return 0;
+}
+
+U_BOOT_CMD(
+	write_mac,	5,	1,	do_write_mac,
+	"write MAC address for ETHERC/GETHERC",
+	"[ETHERC ch0] [ETHERC ch1] [GETHERC ch0] [GETHERC ch1]\n"
+);
diff --git a/board/renesas/sh7757lcr/spi-boot.c b/board/renesas/sh7757lcr/spi-boot.c
new file mode 100644
index 0000000..823844e
--- /dev/null
+++ b/board/renesas/sh7757lcr/spi-boot.c
@@ -0,0 +1,109 @@
+/*
+ * Copyright (C) 2011  Renesas Solutions Corp.
+ *
+ * This file is subject to the terms and conditions of the GNU Lesser
+ * General Public License.  See the file "COPYING.LIB" in the main
+ * directory of this archive for more details.
+ */
+
+#include <common.h>
+
+#define CONFIG_RAM_BOOT_PHYS	0x4ef80000
+#if defined(CONFIG_SH7757_OFFSET_SPI)
+#define CONFIG_SPI_ADDR		0x00010000
+#else
+#define CONFIG_SPI_ADDR		0x00000000
+#endif
+#define CONFIG_SPI_LENGTH	0x00030000
+#define CONFIG_RAM_BOOT		0x8ef80000
+
+#define SPIWDMADR	0xFE001018
+#define SPIWDMCNTR	0xFE001020
+#define SPIDMCOR	0xFE001028
+#define SPIDMINTSR	0xFE001188
+#define SPIDMINTMR	0xFE001190
+
+#define SPIDMINTSR_DMEND	0x00000004
+
+#define TBR	0xFE002000
+#define RBR	0xFE002000
+
+#define CR1	0xFE002008
+#define CR2	0xFE002010
+#define CR3	0xFE002018
+#define CR4	0xFE002020
+
+/* CR1 */
+#define SPI_TBE		0x80
+#define SPI_TBF		0x40
+#define SPI_RBE		0x20
+#define SPI_RBF		0x10
+#define SPI_PFONRD	0x08
+#define SPI_SSDB	0x04
+#define SPI_SSD		0x02
+#define SPI_SSA		0x01
+
+/* CR2 */
+#define SPI_RSTF	0x80
+#define SPI_LOOPBK	0x40
+#define SPI_CPOL	0x20
+#define SPI_CPHA	0x10
+#define SPI_L1M0	0x08
+
+/* CR4 */
+#define SPI_TBEI	0x80
+#define SPI_TBFI	0x40
+#define SPI_RBEI	0x20
+#define SPI_RBFI	0x10
+#define SPI_SSS		0x01
+
+#define spi_write(val, addr)	(*(volatile unsigned long *)(addr)) = val
+#define spi_read(addr)		(*(volatile unsigned long *)(addr))
+
+/* M25P80 */
+#define M25_READ	0x03
+
+#define __uses_spiboot2	__attribute__((section(".spiboot2.text")))
+static void __uses_spiboot2 spi_reset(void)
+{
+	spi_write(0xfe, CR1);
+
+	spi_write(0, SPIDMCOR);
+	spi_write(0x00, CR1);
+
+	spi_write(spi_read(CR2) | SPI_RSTF, CR2);	/* fifo reset */
+	spi_write(spi_read(CR2) & ~SPI_RSTF, CR2);
+}
+
+static void __uses_spiboot2 spi_read_flash(void *buf, unsigned long addr,
+					   unsigned long len)
+{
+	spi_write(M25_READ, TBR);
+	spi_write((addr >> 16) & 0xFF, TBR);
+	spi_write((addr >> 8) & 0xFF, TBR);
+	spi_write(addr & 0xFF, TBR);
+
+	spi_write(SPIDMINTSR_DMEND, SPIDMINTSR);
+	spi_write((unsigned long)buf, SPIWDMADR);
+	spi_write(len & 0xFFFFFFE0, SPIWDMCNTR);
+	spi_write(1, SPIDMCOR);
+
+	spi_write(0xff, CR3);
+	spi_write(spi_read(CR1) | SPI_SSDB, CR1);
+	spi_write(spi_read(CR1) | SPI_SSA, CR1);
+
+	while (!(spi_read(SPIDMINTSR) & SPIDMINTSR_DMEND))
+		;
+}
+
+void __uses_spiboot2 spiboot_main(void)
+{
+	void (*_start)(void) = (void *)CONFIG_SYS_TEXT_BASE;
+
+	spi_reset();
+	spi_read_flash((void *)CONFIG_RAM_BOOT_PHYS, CONFIG_SPI_ADDR,
+			CONFIG_SPI_LENGTH);
+
+	_start();
+}
+
diff --git a/board/renesas/sh7757lcr/u-boot.lds b/board/renesas/sh7757lcr/u-boot.lds
new file mode 100644
index 0000000..a88d781
--- /dev/null
+++ b/board/renesas/sh7757lcr/u-boot.lds
@@ -0,0 +1,101 @@
+/*
+ * Copyright (C) 2007
+ * Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ *
+ * Copyright (C) 2011
+ * Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_FORMAT("elf32-sh-linux", "elf32-sh-linux", "elf32-sh-linux")
+OUTPUT_ARCH(sh)
+ENTRY(_start)
+
+SECTIONS
+{
+	/*
+	 * entry and reloct_dst will be provided via ldflags
+	 */
+	. = .;
+
+	PROVIDE (_ftext = .);
+	PROVIDE (_fcode = .);
+	PROVIDE (_start = .);
+
+	.text :
+	{
+		arch/sh/cpu/sh4/start.o		(.text)
+		*(.spiboot1.text)
+		*(.spiboot2.text)
+		. = ALIGN(8192);
+		common/env_embedded.o	(.ppcenv)
+		. = ALIGN(8192);
+		common/env_embedded.o	(.ppcenvr)
+		. = ALIGN(8192);
+		*(.text)
+		. = ALIGN(4);
+	} =0xFF
+	PROVIDE (_ecode = .);
+	.rodata :
+	{
+		*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
+		. = ALIGN(4);
+	}
+	PROVIDE (_etext = .);
+
+
+	PROVIDE (_fdata = .);
+	.data :
+	{
+		*(.data)
+		. = ALIGN(4);
+	}
+	PROVIDE (_edata = .);
+
+	PROVIDE (_fgot = .);
+	.got :
+	{
+		*(.got)
+		. = ALIGN(4);
+	}
+	PROVIDE (_egot = .);
+
+	PROVIDE (__u_boot_cmd_start = .);
+	.u_boot_cmd :
+	{
+		*(.u_boot_cmd)
+		. = ALIGN(4);
+	}
+	PROVIDE (__u_boot_cmd_end = .);
+
+	PROVIDE (reloc_dst_end = .);
+	/* _reloc_dst_end = .; */
+
+	PROVIDE (bss_start = .);
+	PROVIDE (__bss_start = .);
+	.bss (NOLOAD) :
+	{
+		*(.bss)
+		. = ALIGN(4);
+	}
+	PROVIDE (bss_end = .);
+
+	PROVIDE (_end = .);
+}
diff --git a/board/renesas/sh7763rdp/config.mk b/board/renesas/sh7763rdp/config.mk
deleted file mode 100644
index 54c1a5b..0000000
--- a/board/renesas/sh7763rdp/config.mk
+++ /dev/null
@@ -1,11 +0,0 @@
-#
-# board/sh7763rdp/config.mk
-#
-# CONFIG_SYS_TEXT_BASE refers to image _after_ relocation.
-#
-# NOTE: Must match value used in u-boot.lds (in this directory).
-#
-
-CONFIG_SYS_TEXT_BASE = 0x8FFC0000
-
-# PLATFORM_CPPFLAGS += -DCONFIG_MULTIBOOT
diff --git a/board/renesas/sh7785lcr/Makefile b/board/renesas/sh7785lcr/Makefile
index b5c496f..e404fa6 100644
--- a/board/renesas/sh7785lcr/Makefile
+++ b/board/renesas/sh7785lcr/Makefile
@@ -23,8 +23,12 @@ LIB	= $(obj)lib$(BOARD).o
 COBJS	:= sh7785lcr.o selfcheck.o rtl8169_mac.o
 SOBJS	:= lowlevel_init.o
 
-$(LIB):	$(obj).depend $(COBJS) $(SOBJS)
-	$(call cmd_link_o_target, $(COBJS) $(SOBJS))
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+	$(call cmd_link_o_target, $(OBJS) $(SOBJS))
 
 clean:
 	rm -f $(SOBJS) $(OBJS)
diff --git a/board/renesas/sh7785lcr/config.mk b/board/renesas/sh7785lcr/config.mk
deleted file mode 100644
index 6853d2b..0000000
--- a/board/renesas/sh7785lcr/config.mk
+++ /dev/null
@@ -1,31 +0,0 @@
-#
-# Copyright (C) 2007
-# Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-
-#
-# CONFIG_SYS_TEXT_BASE refers to image _after_ relocation.
-#
-# NOTE: Must match value used in u-boot.lds (in this directory).
-#
-sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
-
-ifdef CONFIG_SH_32BIT
-CONFIG_SYS_TEXT_BASE = 0x8FF80000
-else
-CONFIG_SYS_TEXT_BASE = 0x0ff80000
-endif
diff --git a/board/shmin/config.mk b/board/shmin/config.mk
deleted file mode 100644
index 0c7605e..0000000
--- a/board/shmin/config.mk
+++ /dev/null
@@ -1,27 +0,0 @@
-#
-# Copyright (C) 2010 Nobuhiro Iwamatsu
-#
-# u-boot/board/shmin/config.mk
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-
-#
-# TEXT_BASE refers to image _after_ relocation.
-#
-# NOTE: Must match value used in u-boot.lds (in this directory).
-#
-
-CONFIG_SYS_TEXT_BASE = 0x8DFB0000
diff --git a/boards.cfg b/boards.cfg
index c3b164e..c977528 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -750,6 +750,7 @@ ms7750se                     sh          sh4         ms7750se            -
 ap325rxa                     sh          sh4         ap325rxa            renesas        -
 r2dplus                      sh          sh4         r2dplus             renesas        -
 r7780mp                      sh          sh4         r7780mp             renesas        -
+sh7757lcr                    sh          sh4         sh7757lcr           renesas        -
 sh7763rdp                    sh          sh4         sh7763rdp           renesas        -
 sh7785lcr                    sh          sh4         sh7785lcr           renesas        -
 sh7785lcr_32bit              sh          sh4         sh7785lcr           renesas        -           sh7785lcr:SH_32BIT=1
diff --git a/doc/README.sh7757lcr b/doc/README.sh7757lcr
new file mode 100644
index 0000000..cae14e0
--- /dev/null
+++ b/doc/README.sh7757lcr
@@ -0,0 +1,64 @@
+========================================
+Renesas R0P7757LC0030RL board
+========================================
+
+This board specification:
+=========================
+
+The R0P7757LC0030RL(board config name:sh7757lcr) has the following device:
+
+ - SH7757 (SH-4A)
+ - DDR3-SDRAM 256MB (with ECC)
+ - SPI ROM 8MB
+ - 2D Graphic controller
+ - Ethernet controller
+
+
+configuration for This board:
+=============================
+
+You can select the configuration as follows:
+
+ - make sh7785lcr_config
+
+
+This board specific command:
+============================
+
+This board has the following its specific command:
+
+ - sh_g200
+ - write_mac
+
+
+1. sh_g200
+
+If we run this command, SH4 can control the G200.
+The default setting is that SH4 cannot control the G200.
+
+
+2. write_mac
+
+You can write MAC address to SPI ROM.
+
+ Usage 1) Write MAC address
+
+   write_mac [ETHERC ch0] [ETHERC ch1] [GETHERC ch0] [GETHERC ch1]
+
+	For example)
+	 => write_mac 00:00:87:6c:21:80 00:00:87:6c:21:81 00:00:87:6c:21:82 00:00:87:6c:21:83
+		*) We have to input the command as a single line
+		   (without carriage return)
+		*) We have to reset after input the command.
+
+ Usage 2) Show current data
+
+   write_mac
+
+	For example)
+		=> write_mac
+		 ETHERC ch0 = 00:00:87:6c:21:80
+		 ETHERC ch1 = 00:00:87:6c:21:81
+		GETHERC ch0 = 00:00:87:6c:21:82
+		GETHERC ch1 = 00:00:87:6c:21:83
+
diff --git a/drivers/net/sh_eth.c b/drivers/net/sh_eth.c
index 86cc324..53d918d 100644
--- a/drivers/net/sh_eth.c
+++ b/drivers/net/sh_eth.c
@@ -36,6 +36,12 @@
 #ifndef CONFIG_SH_ETHER_PHY_ADDR
 # error "Please define CONFIG_SH_ETHER_PHY_ADDR"
 #endif
+#ifdef CONFIG_SH_ETHER_CACHE_WRITEBACK
+#define flush_cache_wback(addr, len)	\
+			dcache_wback_range((u32)addr, (u32)(addr + len - 1))
+#else
+#define flush_cache_wback(...)
+#endif
 
 #define SH_ETH_PHY_DELAY 50000
 
@@ -197,6 +203,7 @@ int sh_eth_send(struct eth_device *dev, volatile void *packet, int len)
 	}
 
 	/* Update tx descriptor */
+	flush_cache_wback(packet, len);
 	port_info->tx_desc_cur->td2 = ADDR_TO_PHY(packet);
 	port_info->tx_desc_cur->td1 = len << 16;
 	/* Must preserve the end of descriptor list indication */
@@ -312,6 +319,7 @@ static int sh_eth_tx_desc_init(struct sh_eth_dev *eth)
 
 	tmp_addr = (u32) (((int)port_info->tx_desc_malloc + TX_DESC_SIZE - 1) &
 			  ~(TX_DESC_SIZE - 1));
+	flush_cache_wback(tmp_addr, NUM_TX_DESC * sizeof(struct tx_desc_s));
 	/* Make sure we use a P2 address (non-cacheable) */
 	port_info->tx_desc_base = (struct tx_desc_s *)ADDR_TO_P2(tmp_addr);
 	port_info->tx_desc_cur = port_info->tx_desc_base;
@@ -361,6 +369,7 @@ static int sh_eth_rx_desc_init(struct sh_eth_dev *eth)
 
 	tmp_addr = (u32) (((int)port_info->rx_desc_malloc + RX_DESC_SIZE - 1) &
 			  ~(RX_DESC_SIZE - 1));
+	flush_cache_wback(tmp_addr, NUM_RX_DESC * sizeof(struct rx_desc_s));
 	/* Make sure we use a P2 address (non-cacheable) */
 	port_info->rx_desc_base = (struct rx_desc_s *)ADDR_TO_P2(tmp_addr);
 
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index e34a124..d582fbb 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -37,6 +37,7 @@ COBJS-$(CONFIG_MPC8XXX_SPI) += mpc8xxx_spi.o
 COBJS-$(CONFIG_MXC_SPI) += mxc_spi.o
 COBJS-$(CONFIG_OMAP3_SPI) += omap3_spi.o
 COBJS-$(CONFIG_SOFT_SPI) += soft_spi.o
+COBJS-$(CONFIG_SH_SPI) += sh_spi.o
 
 COBJS	:= $(COBJS-y)
 SRCS	:= $(COBJS:.o=.c)
diff --git a/drivers/spi/sh_spi.c b/drivers/spi/sh_spi.c
new file mode 100644
index 0000000..ba43bec
--- /dev/null
+++ b/drivers/spi/sh_spi.c
@@ -0,0 +1,261 @@
+/*
+ * SH SPI driver
+ *
+ * Copyright (C) 2011 Renesas Solutions Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <spi.h>
+#include <asm/io.h>
+#include "sh_spi.h"
+
+static void sh_spi_write(unsigned long data, unsigned long *reg)
+{
+	writel(data, reg);
+}
+
+static unsigned long sh_spi_read(unsigned long *reg)
+{
+	return readl(reg);
+}
+
+static void sh_spi_set_bit(unsigned long val, unsigned long *reg)
+{
+	unsigned long tmp;
+
+	tmp = sh_spi_read(reg);
+	tmp |= val;
+	sh_spi_write(tmp, reg);
+}
+
+static void sh_spi_clear_bit(unsigned long val, unsigned long *reg)
+{
+	unsigned long tmp;
+
+	tmp = sh_spi_read(reg);
+	tmp &= ~val;
+	sh_spi_write(tmp, reg);
+}
+
+static void clear_fifo(struct sh_spi *ss)
+{
+	sh_spi_set_bit(SH_SPI_RSTF, &ss->regs->cr2);
+	sh_spi_clear_bit(SH_SPI_RSTF, &ss->regs->cr2);
+}
+
+static int recvbuf_wait(struct sh_spi *ss)
+{
+	while (sh_spi_read(&ss->regs->cr1) & SH_SPI_RBE) {
+		if (ctrlc())
+			return 1;
+		udelay(10);
+	}
+	return 0;
+}
+
+static int write_fifo_empty_wait(struct sh_spi *ss)
+{
+	while (!(sh_spi_read(&ss->regs->cr1) & SH_SPI_TBE)) {
+		if (ctrlc())
+			return 1;
+		udelay(10);
+	}
+	return 0;
+}
+
+void spi_init(void)
+{
+}
+
+struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
+		unsigned int max_hz, unsigned int mode)
+{
+	struct sh_spi *ss;
+
+	if (!spi_cs_is_valid(bus, cs))
+		return NULL;
+
+	ss = malloc(sizeof(struct spi_slave));
+	if (!ss)
+		return NULL;
+
+	ss->slave.bus = bus;
+	ss->slave.cs = cs;
+	ss->regs = (struct sh_spi_regs *)CONFIG_SH_SPI_BASE;
+
+	/* SPI sycle stop */
+	sh_spi_write(0xfe, &ss->regs->cr1);
+	/* CR1 init */
+	sh_spi_write(0x00, &ss->regs->cr1);
+	/* CR3 init */
+	sh_spi_write(0x00, &ss->regs->cr3);
+
+	clear_fifo(ss);
+
+	/* 1/8 clock */
+	sh_spi_write(sh_spi_read(&ss->regs->cr2) | 0x07, &ss->regs->cr2);
+	udelay(10);
+
+	return &ss->slave;
+}
+
+void spi_free_slave(struct spi_slave *slave)
+{
+	struct sh_spi *spi = to_sh_spi(slave);
+
+	free(spi);
+}
+
+int spi_claim_bus(struct spi_slave *slave)
+{
+	return 0;
+}
+
+void spi_release_bus(struct spi_slave *slave)
+{
+	struct sh_spi *ss = to_sh_spi(slave);
+
+	sh_spi_write(sh_spi_read(&ss->regs->cr1) &
+		~(SH_SPI_SSA | SH_SPI_SSDB | SH_SPI_SSD), &ss->regs->cr1);
+}
+
+static int sh_spi_send(struct sh_spi *ss, const unsigned char *tx_data,
+			unsigned int len, unsigned long flags)
+{
+	int i, cur_len, ret = 0;
+	int remain = (int)len;
+	unsigned long tmp;
+
+	if (len >= SH_SPI_FIFO_SIZE)
+		sh_spi_set_bit(SH_SPI_SSA, &ss->regs->cr1);
+
+	while (remain > 0) {
+		cur_len = (remain < SH_SPI_FIFO_SIZE) ?
+				remain : SH_SPI_FIFO_SIZE;
+		for (i = 0; i < cur_len &&
+			!(sh_spi_read(&ss->regs->cr4) & SH_SPI_WPABRT) &&
+			!(sh_spi_read(&ss->regs->cr1) & SH_SPI_TBF);
+				i++)
+			sh_spi_write(tx_data[i], &ss->regs->tbr_rbr);
+
+		cur_len = i;
+
+		if (sh_spi_read(&ss->regs->cr4) & SH_SPI_WPABRT) {
+			/* Abort the transaction */
+			flags |= SPI_XFER_END;
+			sh_spi_set_bit(SH_SPI_WPABRT, &ss->regs->cr4);
+			ret = 1;
+			break;
+		}
+
+		remain -= cur_len;
+		tx_data += cur_len;
+
+		if (remain > 0)
+			write_fifo_empty_wait(ss);
+	}
+
+	if (flags & SPI_XFER_END) {
+		tmp = sh_spi_read(&ss->regs->cr1);
+		tmp = tmp & ~(SH_SPI_SSD | SH_SPI_SSDB);
+		sh_spi_write(tmp, &ss->regs->cr1);
+		sh_spi_set_bit(SH_SPI_SSA, &ss->regs->cr1);
+		udelay(100);
+		write_fifo_empty_wait(ss);
+	}
+
+	return ret;
+}
+
+static int sh_spi_receive(struct sh_spi *ss, unsigned char *rx_data,
+			  unsigned int len, unsigned long flags)
+{
+	int i;
+	unsigned long tmp;
+
+	if (len > SH_SPI_MAX_BYTE)
+		sh_spi_write(SH_SPI_MAX_BYTE, &ss->regs->cr3);
+	else
+		sh_spi_write(len, &ss->regs->cr3);
+
+	tmp = sh_spi_read(&ss->regs->cr1);
+	tmp = tmp & ~(SH_SPI_SSD | SH_SPI_SSDB);
+	sh_spi_write(tmp, &ss->regs->cr1);
+	sh_spi_set_bit(SH_SPI_SSA, &ss->regs->cr1);
+
+	for (i = 0; i < len; i++) {
+		if (recvbuf_wait(ss))
+			return 0;
+
+		rx_data[i] = (unsigned char)sh_spi_read(&ss->regs->tbr_rbr);
+	}
+	sh_spi_write(0, &ss->regs->cr3);
+
+	return 0;
+}
+
+int  spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
+		void *din, unsigned long flags)
+{
+	struct sh_spi *ss = to_sh_spi(slave);
+	const unsigned char *tx_data = dout;
+	unsigned char *rx_data = din;
+	unsigned int len = bitlen / 8;
+	int ret = 0;
+
+	if (flags & SPI_XFER_BEGIN)
+		sh_spi_write(sh_spi_read(&ss->regs->cr1) & ~SH_SPI_SSA,
+				&ss->regs->cr1);
+
+	if (tx_data)
+		ret = sh_spi_send(ss, tx_data, len, flags);
+
+	if (ret == 0 && rx_data)
+		ret = sh_spi_receive(ss, rx_data, len, flags);
+
+	if (flags & SPI_XFER_END) {
+		sh_spi_set_bit(SH_SPI_SSD, &ss->regs->cr1);
+		udelay(100);
+
+		sh_spi_clear_bit(SH_SPI_SSA | SH_SPI_SSDB | SH_SPI_SSD,
+				 &ss->regs->cr1);
+		clear_fifo(ss);
+	}
+
+	return ret;
+}
+
+int  spi_cs_is_valid(unsigned int bus, unsigned int cs)
+{
+	/* This driver supports "bus = 0" and "cs = 0" only. */
+	if (!bus && !cs)
+		return 1;
+	else
+		return 0;
+}
+
+void spi_cs_activate(struct spi_slave *slave)
+{
+
+}
+
+void spi_cs_deactivate(struct spi_slave *slave)
+{
+
+}
+
diff --git a/drivers/spi/sh_spi.h b/drivers/spi/sh_spi.h
new file mode 100644
index 0000000..b1cf98c
--- /dev/null
+++ b/drivers/spi/sh_spi.h
@@ -0,0 +1,79 @@
+/*
+ * SH SPI driver
+ *
+ * Copyright (C) 2011 Renesas Solutions Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ */
+
+#ifndef __SH_SPI_H__
+#define __SH_SPI_H__
+
+#include <spi.h>
+
+struct sh_spi_regs {
+	unsigned long tbr_rbr;
+	unsigned long resv1;
+	unsigned long cr1;
+	unsigned long resv2;
+	unsigned long cr2;
+	unsigned long resv3;
+	unsigned long cr3;
+	unsigned long resv4;
+	unsigned long cr4;
+};
+
+/* CR1 */
+#define SH_SPI_TBE	0x80
+#define SH_SPI_TBF	0x40
+#define SH_SPI_RBE	0x20
+#define SH_SPI_RBF	0x10
+#define SH_SPI_PFONRD	0x08
+#define SH_SPI_SSDB	0x04
+#define SH_SPI_SSD	0x02
+#define SH_SPI_SSA	0x01
+
+/* CR2 */
+#define SH_SPI_RSTF	0x80
+#define SH_SPI_LOOPBK	0x40
+#define SH_SPI_CPOL	0x20
+#define SH_SPI_CPHA	0x10
+#define SH_SPI_L1M0	0x08
+
+/* CR3 */
+#define SH_SPI_MAX_BYTE	0xFF
+
+/* CR4 */
+#define SH_SPI_TBEI	0x80
+#define SH_SPI_TBFI	0x40
+#define SH_SPI_RBEI	0x20
+#define SH_SPI_RBFI	0x10
+#define SH_SPI_WPABRT	0x04
+#define SH_SPI_SSS	0x01
+
+#define SH_SPI_FIFO_SIZE	32
+
+struct sh_spi {
+	struct spi_slave	slave;
+	struct sh_spi_regs	*regs;
+};
+
+static inline struct sh_spi *to_sh_spi(struct spi_slave *slave)
+{
+	return container_of(slave, struct sh_spi, slave);
+}
+
+#endif
+
diff --git a/include/configs/MigoR.h b/include/configs/MigoR.h
index 8a6b8d0..7d9368c 100644
--- a/include/configs/MigoR.h
+++ b/include/configs/MigoR.h
@@ -59,6 +59,7 @@
 #define MIGO_R_FLASH_BASE_1	(0xA0000000)
 #define MIGO_R_FLASH_BANK_SIZE	(64 * 1024 * 1024)
 
+#define CONFIG_SYS_TEXT_BASE	0x8FFC0000
 #define CONFIG_SYS_LONGHELP			/* undef to save memory	*/
 #define CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt */
 #define CONFIG_SYS_CBSIZE		256		/* Buffer size for input from the Console */
diff --git a/include/configs/ap325rxa.h b/include/configs/ap325rxa.h
index e7f37f5..711dd3c 100644
--- a/include/configs/ap325rxa.h
+++ b/include/configs/ap325rxa.h
@@ -63,6 +63,8 @@
 #define AP325RXA_FLASH_BASE_1		(0xA0000000)
 #define AP325RXA_FLASH_BANK_SIZE	(128 * 1024 * 1024)
 
+#define CONFIG_SYS_TEXT_BASE	0x8FFC0000
+
 /* undef to save memory	*/
 #define CONFIG_SYS_LONGHELP
 /* Monitor Command Prompt */
diff --git a/include/configs/espt.h b/include/configs/espt.h
index 26389ed..ad3c335 100644
--- a/include/configs/espt.h
+++ b/include/configs/espt.h
@@ -56,6 +56,7 @@
 #define CONFIG_BAUDRATE         115200
 #define CONFIG_CONS_SCIF0		1
 
+#define CONFIG_SYS_TEXT_BASE	0x8FFC0000
 #define CONFIG_SYS_LONGHELP		/* undef to save memory */
 #define CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt */
 #define CONFIG_SYS_CBSIZE		256	/* Buffer size for input from the Console */
diff --git a/include/configs/mpr2.h b/include/configs/mpr2.h
index 311f524..f32899f 100644
--- a/include/configs/mpr2.h
+++ b/include/configs/mpr2.h
@@ -58,6 +58,8 @@
 #define CONFIG_SYS_MONITOR_LEN		(128 * 1024)
 #define CONFIG_SYS_MALLOC_LEN		(256 * 1024)
 
+#define CONFIG_SYS_TEXT_BASE	0x8FFC0000
+
 /* Memory */
 #define CONFIG_SYS_SDRAM_BASE		0x8C000000
 #define CONFIG_SYS_SDRAM_SIZE		(64 * 1024 * 1024)
diff --git a/include/configs/ms7720se.h b/include/configs/ms7720se.h
index 5304237..dd79b2d 100644
--- a/include/configs/ms7720se.h
+++ b/include/configs/ms7720se.h
@@ -52,6 +52,7 @@
 #define MS7720SE_FLASH_BASE_1		0xA0000000
 #define MS7720SE_FLASH_BANK_SIZE	(8 * 1024 * 1024)
 
+#define CONFIG_SYS_TEXT_BASE	0x8FFC0000
 #define CONFIG_SYS_LONGHELP		/* undef to save memory	*/
 #define CONFIG_SYS_PROMPT	"=> "	/* Monitor Command Prompt */
 #define CONFIG_SYS_CBSIZE	256	/* Buffer size for input from the Console */
diff --git a/include/configs/ms7722se.h b/include/configs/ms7722se.h
index 1ddadf6..c8d04f7 100644
--- a/include/configs/ms7722se.h
+++ b/include/configs/ms7722se.h
@@ -57,6 +57,7 @@
 #define MS7722SE_FLASH_BASE_1	(0xA0000000)
 #define MS7722SE_FLASH_BANK_SIZE	(8*1024 * 1024)
 
+#define CONFIG_SYS_TEXT_BASE	0x8FFC0000
 #define CONFIG_SYS_LONGHELP				/* undef to save memory	*/
 #define CONFIG_SYS_PROMPT		"=> "		/* Monitor Command Prompt */
 #define CONFIG_SYS_CBSIZE		256		/* Buffer size for input from the Console */
diff --git a/include/configs/ms7750se.h b/include/configs/ms7750se.h
index 9b43acb..16fb0d4 100644
--- a/include/configs/ms7750se.h
+++ b/include/configs/ms7750se.h
@@ -64,6 +64,7 @@
 /* List of legal baudrate settings for this board */
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 115200, 57600, 38400, 19200, 9600 }
 
+#define CONFIG_SYS_TEXT_BASE		0x8FFC0000
 #define CONFIG_SYS_MEMTEST_START	(CONFIG_SYS_SDRAM_BASE)
 #define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_TEXT_BASE - 0x100000)
 
diff --git a/include/configs/r2dplus.h b/include/configs/r2dplus.h
index 8689513..5534b49 100644
--- a/include/configs/r2dplus.h
+++ b/include/configs/r2dplus.h
@@ -40,6 +40,7 @@
 #define CONFIG_SYS_SDRAM_BASE		(0x8C000000)
 #define CONFIG_SYS_SDRAM_SIZE		(0x04000000)
 
+#define CONFIG_SYS_TEXT_BASE	0x0FFC0000
 #define CONFIG_SYS_LONGHELP
 #define CONFIG_SYS_PROMPT		"=> "
 #define CONFIG_SYS_CBSIZE		256
diff --git a/include/configs/r7780mp.h b/include/configs/r7780mp.h
index 802416f..e1febf3 100644
--- a/include/configs/r7780mp.h
+++ b/include/configs/r7780mp.h
@@ -60,6 +60,7 @@
 /* check for keypress on bootdelay==0 */
 /*#define CONFIG_ZERO_BOOTDELAY_CHECK*/
 
+#define CONFIG_SYS_TEXT_BASE		0x0FFC0000
 #define CONFIG_SYS_SDRAM_BASE		(0x08000000)
 #define CONFIG_SYS_SDRAM_SIZE		(128 * 1024 * 1024)
 
diff --git a/include/configs/rsk7203.h b/include/configs/rsk7203.h
index b3feaa8..0802140 100644
--- a/include/configs/rsk7203.h
+++ b/include/configs/rsk7203.h
@@ -54,6 +54,7 @@
 #define RSK7203_FLASH_BASE_1	0x20000000	/* Non cache */
 #define RSK7203_FLASH_BANK_SIZE	(4 * 1024 * 1024)
 
+#define CONFIG_SYS_TEXT_BASE	0x0C7C0000
 #define CONFIG_SYS_LONGHELP		/* undef to save memory	*/
 #define CONFIG_SYS_PROMPT	"=> "	/* Monitor Command Prompt */
 #define CONFIG_SYS_CBSIZE	256	/* Buffer size for input from the Console */
diff --git a/include/configs/sh7757lcr.h b/include/configs/sh7757lcr.h
new file mode 100644
index 0000000..9799767
--- /dev/null
+++ b/include/configs/sh7757lcr.h
@@ -0,0 +1,146 @@
+/*
+ * Configuation settings for the sh7757lcr board
+ *
+ * Copyright (C) 2011 Renesas Solutions Corp.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __SH7757LCR_H
+#define __SH7757LCR_H
+
+#undef DEBUG
+#define CONFIG_SH		1
+#define CONFIG_SH4A		1
+#define CONFIG_SH_32BIT		1
+#define CONFIG_CPU_SH7757	1
+#define CONFIG_SH7757LCR	1
+
+#define CONFIG_SYS_TEXT_BASE	0x8ef80000
+#define CONFIG_SYS_LDSCRIPT	"board/renesas/sh7757lcr/u-boot.lds"
+
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_DFL
+#define CONFIG_CMD_SDRAM
+#define CONFIG_CMD_SF
+#define CONFIG_CMD_RUN
+#define CONFIG_CMD_SAVEENV
+#define CONFIG_CMD_MD5SUM
+#define CONFIG_MD5
+#define CONFIG_CMD_LOADS
+
+#define CONFIG_BAUDRATE		115200
+#define CONFIG_BOOTDELAY	3
+#define CONFIG_BOOTARGS		"console=ttySC2,115200 root=/dev/nfs ip=dhcp"
+
+#define CONFIG_VERSION_VARIABLE
+#undef	CONFIG_SHOW_BOOT_PROGRESS
+
+/* MEMORY */
+#define SH7757LCR_SDRAM_BASE		(0x80000000)
+#define SH7757LCR_SDRAM_SIZE		(240 * 1024 * 1024)
+#define SH7757LCR_SDRAM_ECC_SETTING	0x0f000000	/* 240MByte */
+#define SH7757LCR_SDRAM_DVC_SIZE	(16 * 1024 * 1024)
+
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_SYS_PROMPT		"=> "
+#define CONFIG_SYS_CBSIZE		256
+#define CONFIG_SYS_PBSIZE		256
+#define CONFIG_SYS_MAXARGS		16
+#define CONFIG_SYS_BARGSIZE		512
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 115200 }
+
+/* SCIF */
+#define CONFIG_SCIF_CONSOLE	1
+#define CONFIG_CONS_SCIF2	1
+#undef	CONFIG_SYS_CONSOLE_INFO_QUIET
+#undef	CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
+#undef	CONFIG_SYS_CONSOLE_ENV_OVERWRITE
+
+#define CONFIG_SYS_MEMTEST_START	(SH7757LCR_SDRAM_BASE)
+#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + \
+					 224 * 1024 * 1024)
+#undef	CONFIG_SYS_ALT_MEMTEST
+#undef	CONFIG_SYS_MEMTEST_SCRATCH
+#undef	CONFIG_SYS_LOADS_BAUD_CHANGE
+
+#define CONFIG_SYS_SDRAM_BASE		(SH7757LCR_SDRAM_BASE)
+#define CONFIG_SYS_SDRAM_SIZE		(SH7757LCR_SDRAM_SIZE)
+#define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + \
+					 (128 + 16) * 1024 * 1024)
+
+#define CONFIG_SYS_MONITOR_BASE		0x00000000
+#define CONFIG_SYS_MONITOR_LEN		(256 * 1024)
+#define CONFIG_SYS_MALLOC_LEN		(4 * 1024 * 1024)
+#define CONFIG_SYS_BOOTMAPSZ		(8 * 1024 * 1024)
+
+/* FLASH */
+#define CONFIG_SYS_NO_FLASH
+
+/* Ether */
+#define CONFIG_NET_MULTI		1
+#define CONFIG_SH_ETHER			1
+#define CONFIG_SH_ETHER_USE_PORT	0
+#define CONFIG_SH_ETHER_PHY_ADDR	1
+#define CONFIG_SH_ETHER_CACHE_WRITEBACK	1
+
+#define SH7757LCR_ETHERNET_MAC_BASE_SPI	0x000b0000
+#define SH7757LCR_SPI_SECTOR_SIZE	(64 * 1024)
+#define SH7757LCR_ETHERNET_MAC_BASE	SH7757LCR_ETHERNET_MAC_BASE_SPI
+#define SH7757LCR_ETHERNET_MAC_SIZE	17
+#define SH7757LCR_ETHERNET_NUM_CH	2
+#define BOARD_LATE_INIT			1
+
+/* Gigabit Ether */
+#define SH7757LCR_GIGA_ETHERNET_NUM_CH	2
+
+/* SPI */
+#define CONFIG_SH_SPI			1
+#define CONFIG_SH_SPI_BASE		0xfe002000
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_STMICRO	1
+
+/* SH7757 board */
+#define SH7757LCR_SDRAM_PHYS_TOP	0x40000000
+#define SH7757LCR_GRA_OFFSET		0x1f000000
+#define SH7757LCR_PCIEBRG_ADDR_B0	0x000a0000
+#define SH7757LCR_PCIEBRG_SIZE_B0	(64 * 1024)
+#define SH7757LCR_PCIEBRG_ADDR		0x00090000
+#define SH7757LCR_PCIEBRG_SIZE		(96 * 1024)
+
+/* ENV setting */
+#define CONFIG_ENV_IS_EMBEDDED
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_ENV_SECT_SIZE	(64 * 1024)
+#define CONFIG_ENV_ADDR		(0x00080000)
+#define CONFIG_ENV_OFFSET	(CONFIG_ENV_ADDR)
+#define CONFIG_ENV_OVERWRITE	1
+#define CONFIG_ENV_SIZE		(CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SECT_SIZE)
+#define CONFIG_EXTRA_ENV_SETTINGS				\
+		"netboot=bootp; bootm\0"
+
+/* Board Clock */
+#define CONFIG_SYS_CLK_FREQ	48000000
+#define CONFIG_SYS_TMU_CLK_DIV	4
+#define CONFIG_SYS_HZ		1000
+#endif	/* __SH7757LCR_H */
diff --git a/include/configs/sh7763rdp.h b/include/configs/sh7763rdp.h
index 209cb88..6a08413 100644
--- a/include/configs/sh7763rdp.h
+++ b/include/configs/sh7763rdp.h
@@ -56,6 +56,7 @@
 #define CONFIG_BAUDRATE         115200
 #define CONFIG_CONS_SCIF2		1
 
+#define CONFIG_SYS_TEXT_BASE	0x8FFC0000
 #define CONFIG_SYS_LONGHELP		/* undef to save memory */
 #define CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt */
 #define CONFIG_SYS_CBSIZE		256	/* Buffer size for input from the Console */
diff --git a/include/configs/sh7785lcr.h b/include/configs/sh7785lcr.h
index a95a759..8eb9a12 100644
--- a/include/configs/sh7785lcr.h
+++ b/include/configs/sh7785lcr.h
@@ -63,6 +63,7 @@
 
 /* MEMORY */
 #if defined(CONFIG_SH_32BIT)
+#define CONFIG_SYS_TEXT_BASE		0x8FF80000
 /* 0x40000000 - 0x47FFFFFF does not use */
 #define CONFIG_SH_SDRAM_OFFSET		(0x8000000)
 #define SH7785LCR_SDRAM_PHYS_BASE	(0x40000000 + CONFIG_SH_SDRAM_OFFSET)
@@ -72,6 +73,7 @@
 #define SH7785LCR_FLASH_BANK_SIZE	(64 * 1024 * 1024)
 #define SH7785LCR_USB_BASE		(0xa6000000)
 #else
+#define CONFIG_SYS_TEXT_BASE		0x0FF80000
 #define SH7785LCR_SDRAM_BASE		(0x08000000)
 #define SH7785LCR_SDRAM_SIZE		(128 * 1024 * 1024)
 #define SH7785LCR_FLASH_BASE_1		(0xa0000000)
diff --git a/include/configs/shmin.h b/include/configs/shmin.h
index bee7e44..3a008f0 100644
--- a/include/configs/shmin.h
+++ b/include/configs/shmin.h
@@ -56,6 +56,7 @@
 #define SHMIN_SDRAM_BASE		(0x8C000000)
 #define SHMIN_FLASH_BASE_1		(0xA0000000)
 
+#define CONFIG_SYS_TEXT_BASE	0x8DFB0000
 #define CONFIG_SYS_LONGHELP		/* undef to save memory	*/
 #define CONFIG_SYS_PROMPT	"=> "	/* Monitor Command Prompt */
 #define CONFIG_SYS_CBSIZE	256	/* Buffer size for input from the Console */