powerpc/mpc85xx:Add BSC9131/BSC9130/BSC9231 Processor Support

- BSC9131 is integrated device that targets Femto base station market.
   It combines Power Architecture e500v2 and DSP StarCore SC3850 core
   technologies with MAPLE-B2F baseband acceleration processing elements.
 - BSC9130 is exactly same as BSC9131 except that the max e500v2
   core and DSP core frequencies are 800M(these are 1G in case of 9131).
 - BSC9231 is similar to BSC9131 except no MAPLE

The BSC9131 SoC includes the following function and features:
    . Power Architecture subsystem including a e500 processor with 256-Kbyte shared
      L2 cache
    . StarCore SC3850 DSP subsystem with a 512-Kbyte private L2 cache
    . The Multi Accelerator Platform Engine for Femto BaseStation Baseband
      Processing (MAPLE-B2F)
    . A multi-standard baseband algorithm accelerator for Channel Decoding/Encoding,
     Fourier Transforms, UMTS chip rate processing, LTE UP/DL Channel processing,
     and CRC algorithms
    . Consists of accelerators for Convolution, Filtering, Turbo Encoding,
     Turbo Decoding, Viterbi decoding, Chiprate processing, and Matrix Inversion
     operations
    . DDR3/3L memory interface with 32-bit data width without ECC and 16-bit with
     ECC, up to 400-MHz clock/800 MHz data rate
    . Dedicated security engine featuring trusted boot
    . DMA controller
    . OCNDMA with four bidirectional channels
    . Interfaces
    . Two triple-speed Gigabit Ethernet controllers featuring network acceleration
      including IEEE 1588. v2 hardware support and virtualization (eTSEC)
    . eTSEC 1 supports RGMII/RMII
    . eTSEC 2 supports RGMII
    . High-speed USB 2.0 host and device controller with ULPI interface
    . Enhanced secure digital (SD/MMC) host controller (eSDHC)
    . Antenna interface controller (AIC), supporting three industry standard
      JESD207/three custom ADI RF interfaces (two dual port and one single port)
      and three MAXIM's MaxPHY serial interfaces
    . ADI lanes support both full duplex FDD support and half duplex TDD support
    . Universal Subscriber Identity Module (USIM) interface that facilitates
      communication to SIM cards or Eurochip pre-paid phone cards
    . TDM with one TDM port
    . Two DUART, four eSPI, and two I2C controllers
    . Integrated Flash memory controller (IFC)
    . TDM with 256 channels
    . GPIO
    . Sixteen 32-bit timers

The DSP portion of the SoC consists of DSP core (SC3850) and various
accelerators pertaining to DSP operations.

This patch takes care of code pertaining to power side functionality only.

Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com>
Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com>
Signed-off-by: Akhil Goyal <Akhil.Goyal@freescale.com>
Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: Rajan Srivastava <rajan.srivastava@freescale.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>

5 files changed, 142 insertions, 3 deletions

diff --git a/arch/powerpc/cpu/mpc85xx/Makefile b/arch/powerpc/cpu/mpc85xx/Makefile
index c512b33..7d65aa7 100644
--- a/arch/powerpc/cpu/mpc85xx/Makefile
+++ b/arch/powerpc/cpu/mpc85xx/Makefile
@@ -70,6 +70,7 @@ COBJS-$(CONFIG_PPC_P3041)	+= ddr-gen3.o
 COBJS-$(CONFIG_PPC_P3060)	+= ddr-gen3.o
 COBJS-$(CONFIG_PPC_P4080)	+= ddr-gen3.o
 COBJS-$(CONFIG_PPC_P5020)	+= ddr-gen3.o
+COBJS-$(CONFIG_BSC9131)		+= ddr-gen3.o
 
 COBJS-$(CONFIG_CPM2)	+= ether_fcc.o
 COBJS-$(CONFIG_OF_LIBFDT) += fdt.o
diff --git a/arch/powerpc/cpu/mpc8xxx/cpu.c b/arch/powerpc/cpu/mpc8xxx/cpu.c
index 0365ca8..7340f69 100644
--- a/arch/powerpc/cpu/mpc8xxx/cpu.c
+++ b/arch/powerpc/cpu/mpc8xxx/cpu.c
@@ -1,5 +1,5 @@
 /*
- * Copyright 2009-2011 Freescale Semiconductor, Inc.
+ * Copyright 2009-2012 Freescale Semiconductor, Inc.
  *
  * This file is derived from arch/powerpc/cpu/mpc85xx/cpu.c and
  * arch/powerpc/cpu/mpc86xx/cpu.c. Basically this file contains
@@ -113,6 +113,10 @@ struct cpu_type cpu_type_list [] = {
 	CPU_TYPE_ENTRY(P5010, P5010_E, 1),
 	CPU_TYPE_ENTRY(P5020, P5020, 2),
 	CPU_TYPE_ENTRY(P5020, P5020_E, 2),
+	CPU_TYPE_ENTRY(BSC9130, 9130, 1),
+	CPU_TYPE_ENTRY(BSC9130, 9130_E, 1),
+	CPU_TYPE_ENTRY(BSC9131, 9131, 1),
+	CPU_TYPE_ENTRY(BSC9131, 9131_E, 1),
 #elif defined(CONFIG_MPC86xx)
 	CPU_TYPE_ENTRY(8610, 8610, 1),
 	CPU_TYPE_ENTRY(8641, 8641, 2),
diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h
index 191629b..83dd739 100644
--- a/arch/powerpc/include/asm/config_mpc85xx.h
+++ b/arch/powerpc/include/asm/config_mpc85xx.h
@@ -1,5 +1,5 @@
 /*
- * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011-2012 Freescale Semiconductor, Inc.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
@@ -505,6 +505,18 @@
 #define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM	9
 #define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM	5
 
+#elif defined(CONFIG_BSC9131)
+#define CONFIG_MAX_CPUS			1
+#define CONFIG_FSL_SDHC_V2_3
+#define CONFIG_SYS_FSL_NUM_LAWS		12
+#define CONFIG_TSECV2
+#define CONFIG_SYS_FSL_SEC_COMPAT	4
+#define CONFIG_NUM_DDR_CONTROLLERS	1
+#define CONFIG_SYS_CCSRBAR_DEFAULT	0xff700000
+#define CONFIG_NAND_FSL_IFC
+#define CONFIG_SYS_FSL_ERRATUM_IFC_A003399
+#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
+
 #else
 #error Processor type not defined for this platform
 #endif
diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h
index 632e3c1..53d563e 100644
--- a/arch/powerpc/include/asm/immap_85xx.h
+++ b/arch/powerpc/include/asm/immap_85xx.h
@@ -1,7 +1,7 @@
 /*
  * MPC85xx Internal Memory Map
  *
- * Copyright 2007-2011 Freescale Semiconductor, Inc.
+ * Copyright 2007-2012 Freescale Semiconductor, Inc.
  *
  * Copyright(c) 2002,2003 Motorola Inc.
  * Xianghua Xiao (x.xiao@motorola.com)
@@ -1934,7 +1934,11 @@ typedef struct ccsr_gur {
 #define MPC85xx_PORPLLSR_DDR_RATIO	0x3e000000
 #define MPC85xx_PORPLLSR_DDR_RATIO_SHIFT	25
 #else
+#ifdef CONFIG_BSC9131
+#define MPC85xx_PORPLLSR_DDR_RATIO	0x00003f00
+#else
 #define MPC85xx_PORPLLSR_DDR_RATIO	0x00003e00
+#endif
 #define MPC85xx_PORPLLSR_DDR_RATIO_SHIFT	9
 #endif
 #define MPC85xx_PORPLLSR_QE_RATIO	0x3e000000
@@ -2081,6 +2085,50 @@ typedef struct ccsr_gur {
 #define MPC85xx_PMUXCR_SPI_MASK		0x00600000
 #define MPC85xx_PMUXCR_SPI		0x00000000
 #endif
+#if defined(CONFIG_BSC9131)
+#define MPC85xx_PMUXCR_TSEC2_DMA_GPIO_IRQ	0x40000000
+#define MPC85xx_PMUXCR_TSEC2_USB		0xC0000000
+#define MPC85xx_PMUXCR_TSEC2_1588_PPS		0x10000000
+#define MPC85xx_PMUXCR_TSEC2_1588_RSVD		0x30000000
+#define MPC85xx_PMUXCR_IFC_AD_GPIO		0x04000000
+#define MPC85xx_PMUXCR_IFC_AD_GPIO_MASK		0x0C000000
+#define MPC85xx_PMUXCR_IFC_AD15_GPIO		0x01000000
+#define MPC85xx_PMUXCR_IFC_AD15_TIMER2		0x02000000
+#define MPC85xx_PMUXCR_IFC_AD16_GPO8		0x00400000
+#define MPC85xx_PMUXCR_IFC_AD16_MSRCID0		0x00800000
+#define MPC85xx_PMUXCR_IFC_AD17_GPO		0x00100000
+#define MPC85xx_PMUXCR_IFC_AD17_GPO_MASK	0x00300000
+#define MPC85xx_PMUXCR_IFC_AD17_MSRCID_DSP	0x00200000
+#define MPC85xx_PMUXCR_IFC_CS2_GPO65		0x00040000
+#define MPC85xx_PMUXCR_IFC_CS2_DSP_TDI		0x00080000
+#define MPC85xx_PMUXCR_SDHC_USIM		0x00010000
+#define MPC85xx_PMUXCR_SDHC_TDM_RFS_RCK		0x00020000
+#define MPC85xx_PMUXCR_SDHC_GPIO77		0x00030000
+#define MPC85xx_PMUXCR_SDHC_RESV		0x00004000
+#define MPC85xx_PMUXCR_SDHC_TDM_TXD_RXD		0x00008000
+#define MPC85xx_PMUXCR_SDHC_GPIO_TIMER4		0x0000C000
+#define MPC85xx_PMUXCR_USB_CLK_UART_SIN		0x00001000
+#define MPC85xx_PMUXCR_USB_CLK_GPIO69		0x00002000
+#define MPC85xx_PMUXCR_USB_CLK_TIMER3		0x00003000
+#define MPC85xx_PMUXCR_USB_UART_GPIO0		0x00000400
+#define MPC85xx_PMUXCR_USB_RSVD			0x00000C00
+#define MPC85xx_PMUXCR_USB_GPIO62_TRIG_IN	0x00000800
+#define MPC85xx_PMUXCR_USB_D1_2_IIC2_SDA_SCL	0x00000100
+#define MPC85xx_PMUXCR_USB_D1_2_GPIO71_72	0x00000200
+#define MPC85xx_PMUXCR_USB_D1_2_RSVD		0x00000300
+#define MPC85xx_PMUXCR_USB_DIR_GPIO2		0x00000040
+#define MPC85xx_PMUXCR_USB_DIR_TIMER1		0x00000080
+#define MPC85xx_PMUXCR_USB_DIR_MCP_B		0x000000C0
+#define MPC85xx_PMUXCR_SPI1_UART3		0x00000010
+#define MPC85xx_PMUXCR_SPI1_SIM			0x00000020
+#define MPC85xx_PMUXCR_SPI1_CKSTP_IN_GPO74	0x00000030
+#define MPC85xx_PMUXCR_SPI1_CS2_CKSTP_OUT_B	0x00000004
+#define MPC85xx_PMUXCR_SPI1_CS2_dbg_adi1_rxen	0x00000008
+#define MPC85xx_PMUXCR_SPI1_CS2_GPO75		0x0000000C
+#define MPC85xx_PMUXCR_SPI1_CS3_ANT_TCXO_PWM	0x00000001
+#define MPC85xx_PMUXCR_SPI1_CS3_dbg_adi2_rxen	0x00000002
+#define MPC85xx_PMUXCR_SPI1_CS3_GPO76		0x00000003
+#endif
 	u32	pmuxcr2;	/* Alt. function signal multiplex control 2 */
 #if defined(CONFIG_P1010) || defined(CONFIG_P1014)
 #define MPC85xx_PMUXCR2_UART_GPIO		0x40000000
@@ -2111,7 +2159,69 @@ typedef struct ccsr_gur {
 #define MPC85xx_PMUXCR2_ETSECUSB_MASK	0x001f8000
 #define MPC85xx_PMUXCR2_USB		0x00150000
 #endif
+#if defined(CONFIG_BSC9131)
+#define MPC85xx_PMUXCR2_UART_CTS_B0_SIM_PD		0X40000000
+#define MPC85xx_PMUXCR2_UART_CTS_B0_DSP_TMS		0X80000000
+#define MPC85xx_PMUXCR2_UART_CTS_B0_GPIO42		0xC0000000
+#define MPC85xx_PMUXCR2_UART_RTS_B0_PWM2		0x10000000
+#define MPC85xx_PMUXCR2_UART_RTS_B0_DSP_TCK		0x20000000
+#define MPC85xx_PMUXCR2_UART_RTS_B0_GPIO43		0x30000000
+#define MPC85xx_PMUXCR2_UART_CTS_B1_SIM_PD		0x04000000
+#define MPC85xx_PMUXCR2_UART_CTS_B1_SRESET_B		0x08000000
+#define MPC85xx_PMUXCR2_UART_CTS_B1_GPIO44		0x0C000000
+#define MPC85xx_PMUXCR2_UART_RTS_B1_PPS_LED		0x01000000
+#define MPC85xx_PMUXCR2_UART_RTS_B1_RSVD		0x02000000
+#define MPC85xx_PMUXCR2_UART_RTS_B1_GPIO45		0x03000000
+#define MPC85xx_PMUXCR2_TRIG_OUT_ASLEEP			0x00400000
+#define MPC85xx_PMUXCR2_TRIG_OUT_DSP_TRST_B		0x00800000
+#define MPC85xx_PMUXCR2_ANT1_TIMER5			0x00100000
+#define MPC85xx_PMUXCR2_ANT1_TSEC_1588			0x00200000
+#define MPC85xx_PMUXCR2_ANT1_GPIO95_19			0x00300000
+#define MPC85xx_PMUXCR2_ANT1_TX_RX_FRAME_MAX3_LOCK	0x00040000
+#define MPC85xx_PMUXCR2_ANT1_TX_RX_FRAME_RSVD		0x00080000
+#define MPC85xx_PMUXCR2_ANT1_TX_RX_FRAME_GPIO80_20	0x000C0000
+#define MPC85xx_PMUXCR2_ANT1_DIO0_3_SPI3_CS0		0x00010000
+#define MPC85xx_PMUXCR2_ANT1_DIO0_3_ANT2_DO_3		0x00020000
+#define MPC85xx_PMUXCR2_ANT1_DIO0_3_GPIO81_84		0x00030000
+#define MPC85xx_PMUXCR2_ANT1_DIO4_7_SPI4		0x00004000
+#define MPC85xx_PMUXCR2_ANT1_DIO4_7_ANT2_DO4_7		0x00008000
+#define MPC85xx_PMUXCR2_ANT1_DIO4_7_GPIO85_88		0x0000C000
+#define MPC85xx_PMUXCR2_ANT1_DIO8_9_MAX2_1_LOCK		0x00001000
+#define MPC85xx_PMUXCR2_ANT1_DIO8_9_ANT2_DO8_9		0x00002000
+#define MPC85xx_PMUXCR2_ANT1_DIO8_9_GPIO21_22		0x00003000
+#define MPC85xx_PMUXCR2_ANT1_DIO10_11_TIMER6_7		0x00000400
+#define MPC85xx_PMUXCR2_ANT1_DIO10_11_ANT2_DO10_11	0x00000800
+#define MPC85xx_PMUXCR2_ANT1_DIO10_11_GPIO23_24		0x00000C00
+#define MPC85xx_PMUXCR2_ANT2_RSVD			0x00000100
+#define MPC85xx_PMUXCR2_ANT2_GPO90_91_DMA		0x00000300
+#define MPC85xx_PMUXCR2_ANT2_ENABLE_DIO0_10_USB		0x00000040
+#define MPC85xx_PMUXCR2_ANT2_ENABLE_DIO0_10_GPIO	0x000000C0
+#define MPC85xx_PMUXCR2_ANT2_DIO11_RSVD			0x00000010
+#define MPC85xx_PMUXCR2_ANT2_DIO11_TIMER8		0x00000020
+#define MPC85xx_PMUXCR2_ANT2_DIO11_GPIO61		0x00000030
+#define MPC85xx_PMUXCR2_ANT3_AGC_GPO53			0x00000004
+#define MPC85xx_PMUXCR2_ANT3_DO_TDM			0x00000001
+#define MPC85xx_PMUXCR2_ANT3_DO_GPIO46_49		0x00000002
+	u32	pmuxcr3;
+
+#define MPC85xx_PMUXCR3_ANT3_DO4_5_TDM			0x40000000
+#define MPC85xx_PMUXCR3_ANT3_DO4_5_GPIO_50_51		0x80000000
+#define MPC85xx_PMUXCR3_ANT3_DO6_7_TRIG_IN_SRESET_B	0x10000000
+#define MPC85xx_PMUXCR3_ANT3_DO6_7_GPIO_52_53		0x20000000
+#define MPC85xx_PMUXCR3_ANT3_DO8_MCP_B			0x04000000
+#define MPC85xx_PMUXCR3_ANT3_DO8_GPIO54			0x08000000
+#define MPC85xx_PMUXCR3_ANT3_DO9_10_CKSTP_IN_OUT	0x01000000
+#define MPC85xx_PMUXCR3_ANT3_DO9_10_GPIO55_56		0x02000000
+#define MPC85xx_PMUXCR3_ANT3_DO11_IRQ_OUT		0x00400000
+#define MPC85xx_PMUXCR3_ANT3_DO11_GPIO57		0x00800000
+#define MPC85xx_PMUXCR3_SPI2_CS2_GPO93			0x00100000
+#define MPC85xx_PMUXCR3_SPI2_CS3_GPO94			0x00040000
+#define MPC85xx_PMUXCR3_ANT2_AGC_RSVD			0x00010000
+#define MPC85xx_PMUXCR3_ANT2_GPO89			0x00030000
+	u32 pmuxcr4;
+#else
 	u8	res6[8];
+#endif
 	u32	devdisr;	/* Device disable control */
 #define MPC85xx_DEVDISR_PCI1		0x80000000
 #define MPC85xx_DEVDISR_PCI2		0x40000000
@@ -2166,7 +2276,14 @@ typedef struct ccsr_gur {
 	u32	ddrdllcr;	/* DDR DLL control */
 	u8	res14[12];
 	u32	lbcdllcr;	/* LBC DLL control */
+#if defined(CONFIG_BSC9131)
+	u8	res15[12];
+	u32	halt_req_mask;
+#define HALTED_TO_HALT_REQ_MASK_0	0x80000000
+	u8	res18[232];
+#else
 	u8	res15[248];
+#endif
 	u32	lbiuiplldcr0;	/* LBIU PLL Debug Reg 0 */
 	u32	lbiuiplldcr1;	/* LBIU PLL Debug Reg 1 */
 	u32	ddrioovcr;	/* DDR IO Override Control */
diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h
index 4e32639..c9e112c 100644
--- a/arch/powerpc/include/asm/processor.h
+++ b/arch/powerpc/include/asm/processor.h
@@ -1136,6 +1136,11 @@
 #define SVR_8641	0x809000
 #define SVR_8641D	0x809001
 
+#define SVR_9130	0x860001
+#define SVR_9130_E	0x860801
+#define SVR_9131	0x860000
+#define SVR_9131_E	0x860800
+
 #define SVR_Unknown	0xFFFFFF
 
 #define _GLOBAL(n)\