* Temporarily disabled John Kerl's extended MII command code because

  "miivals.h" is missing

* Patches by Mark Jonas, 13 Apr 2004:
  - Remove CS0 chip select timing setting from cpu/mpc5xxx/start.S
  - Add sync instructions to IceCube SDRAM init code
  - Move SDRAM chip constants into seperate include files
  - Unify DDR and SDR initialization code
  - Unify all IceCube (Lite5xxx) target names

11 files changed, 276 insertions, 108 deletions

diff --git a/CHANGELOG b/CHANGELOG
index 1420fd1..f4112df 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,16 @@
 Changes for U-Boot 1.1.1:
 ======================================================================
 
+* Temporarily disabled John Kerl's extended MII command code because
+  "miivals.h" is missing
+
+* Patches by Mark Jonas, 13 Apr 2004:
+  - Remove CS0 chip select timing setting from cpu/mpc5xxx/start.S
+  - Add sync instructions to IceCube SDRAM init code
+  - Move SDRAM chip constants into seperate include files
+  - Unify DDR and SDR initialization code
+  - Unify all IceCube (Lite5xxx) target names
+
 * Patch by John Kerl, 16 Apr 2004:
   Enable ranges in mii command, e.g. mii read 0-1f 0 or
   mii read 4-7 18-1a.  Also add mii dump subcommand for
diff --git a/MAKEALL b/MAKEALL
index b241057..d0dd223 100644
--- a/MAKEALL
+++ b/MAKEALL
@@ -25,7 +25,7 @@ LIST_5xx="	\
 #########################################################################
 
 LIST_5xxx="	\
-	IceCube_5100	IceCube_5200	EVAL5200	PM520		\
+	icecube_5100	icecube_5200	EVAL5200	PM520		\
 "
 
 #########################################################################
diff --git a/Makefile b/Makefile
index 0287765..3eb1758 100644
--- a/Makefile
+++ b/Makefile
@@ -212,16 +212,16 @@ PATI_config:		unconfig
 #########################################################################
 ## MPC5xxx Systems
 #########################################################################
-MPC5200LITE_config		\
-MPC5200LITE_LOWBOOT_config	\
-MPC5200LITE_LOWBOOT08_config	\
-icecube_5200_DDR_config		\
-IceCube_5200_DDR_config		\
-icecube_5200_DDR_LOWBOOT_config \
-icecube_5200_DDR_LOWBOOT08_config \
-icecube_5200_config		\
-IceCube_5200_config		\
-IceCube_5100_config:		unconfig
+Lite5200_config				\
+Lite5200_LOWBOOT_config			\
+Lite5200_LOWBOOT08_config		\
+icecube_5200_config			\
+icecube_5200_LOWBOOT_config		\
+icecube_5200_LOWBOOT08_config		\
+icecube_5200_DDR_config 		\
+icecube_5200_DDR_LOWBOOT_config 	\
+icecube_5200_DDR_LOWBOOT08_config	\
+icecube_5100_config:			unconfig
 	@ >include/config.h
 	@[ -z "$(findstring LOWBOOT_,$@)" ] || \
 		{ if [ "$(findstring DDR,$@)" ] ; \
diff --git a/board/icecube/icecube.c b/board/icecube/icecube.c
index e40bcdf..5a206c0 100644
--- a/board/icecube/icecube.c
+++ b/board/icecube/icecube.c
@@ -2,6 +2,9 @@
  * (C) Copyright 2003
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
+ * (C) Copyright 2004
+ * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com.
+ *
  * See file CREDITS for list of people who contributed to this
  * project.
  *
@@ -25,90 +28,84 @@
 #include <mpc5xxx.h>
 #include <pci.h>
 
+#if defined(CONFIG_MPC5200_DDR)
+#include "mt46v16m16-75.h"
+#else
+#include "mt48lc16m16a2-75.h"
+#endif
+
 #ifndef CFG_RAMBOOT
 static void sdram_start (int hi_addr)
 {
 	long hi_addr_bit = hi_addr ? 0x01000000 : 0;
 
-#ifdef CONFIG_MPC5200_DDR
 	/* unlock mode register */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = 0xf05f0f00 | hi_addr_bit;
+	*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000000 | hi_addr_bit;
+	__asm__ volatile ("sync");
+	
 	/* precharge all banks */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = 0xf05f0f02 | hi_addr_bit;
+	*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | hi_addr_bit;
+	__asm__ volatile ("sync");
+
+#if SDRAM_DDR
 	/* set mode register: extended mode */
-	*(vu_long *)MPC5XXX_SDRAM_MODE = 0x40090000;
+	*(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_EMODE;
+	__asm__ volatile ("sync");
+
 	/* set mode register: reset DLL */
-	*(vu_long *)MPC5XXX_SDRAM_MODE = 0x058d0000;
-	/* precharge all banks */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = 0xf05f0f02 | hi_addr_bit;
-	/* auto refresh */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = 0xf05f0f04 | hi_addr_bit;
-	/* set mode register */
-	*(vu_long *)MPC5XXX_SDRAM_MODE = 0x018d0000;
-	/* normal operation */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = 0x705f0f00 | hi_addr_bit;
-#else
-	/* unlock mode register */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = 0xd04f0000 | hi_addr_bit;
-	/* precharge all banks */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = 0xd04f0002 | hi_addr_bit;
-	/* set mode register */
-#if defined(CONFIG_MPC5200)
-	*(vu_long *)MPC5XXX_SDRAM_MODE = 0x00cd0000;
-#elif defined(CONFIG_MGT5100)
-	*(vu_long *)MPC5XXX_SDRAM_MODE = 0x008d0000;
+	*(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE | 0x04000000;
+	__asm__ volatile ("sync");
 #endif
+
+	/* precharge all banks */
+	*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | hi_addr_bit;
+	__asm__ volatile ("sync");
+
 	/* auto refresh */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = 0xd04f0004 | hi_addr_bit;
-	/* auto refresh */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = 0xd04f0004 | hi_addr_bit;
+	*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000004 | hi_addr_bit;
+	__asm__ volatile ("sync");
+
 	/* set mode register */
-	*(vu_long *)MPC5XXX_SDRAM_MODE = 0x00cd0000;
+	*(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE;
+	__asm__ volatile ("sync");
+	
 	/* normal operation */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = 0x504f0000 | hi_addr_bit;
-#endif
+	*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | hi_addr_bit;
+	__asm__ volatile ("sync");
 }
 #endif
 
+/*
+ * ATTENTION: Although partially referenced initdram does NOT make real use
+ *            use of CFG_SDRAM_BASE. The code does not work if CFG_SDRAM_BASE
+ *            is something else than 0x00000000.
+ */
+
+#if defined(CONFIG_MPC5200)
 long int initdram (int board_type)
 {
 	ulong dramsize = 0;
-#ifdef CONFIG_MPC5200_DDR
 	ulong dramsize2 = 0;
-#endif
 #ifndef CFG_RAMBOOT
 	ulong test1, test2;
-
-	/* configure SDRAM start/end */
-#if defined(CONFIG_MPC5200)
+	
+	/* setup SDRAM chip selects */
 	*(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x0000001e;/* 2G at 0x0 */
 	*(vu_long *)MPC5XXX_SDRAM_CS1CFG = 0x80000000;/* disabled */
+	__asm__ volatile ("sync");
 
-#ifdef CONFIG_MPC5200_DDR
 	/* setup config registers */
-	*(vu_long *)MPC5XXX_SDRAM_CONFIG1 = 0x73722930;
-	*(vu_long *)MPC5XXX_SDRAM_CONFIG2 = 0x47770000;
+	*(vu_long *)MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1;
+	*(vu_long *)MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2;
+	__asm__ volatile ("sync");
 
-	/* set tap delay to 0x10 */
-	*(vu_long *)MPC5XXX_CDM_PORCFG = 0x10000000;
-#else
-	/* setup config registers */
-	*(vu_long *)MPC5XXX_SDRAM_CONFIG1 = 0xd2322800;
-	*(vu_long *)MPC5XXX_SDRAM_CONFIG2 = 0x8ad70000;
+#if SDRAM_DDR
+	/* set tap delay */
+	*(vu_long *)MPC5XXX_CDM_PORCFG = SDRAM_TAPDELAY;
+	__asm__ volatile ("sync");
 #endif
 
-#elif defined(CONFIG_MGT5100)
-	*(vu_long *)MPC5XXX_SDRAM_START = 0x00000000;
-	*(vu_long *)MPC5XXX_SDRAM_STOP = 0x0000ffff;/* 2G */
-	*(vu_long *)MPC5XXX_ADDECR |= (1 << 22); /* Enable SDRAM */
-
-	/* setup config registers */
-	*(vu_long *)MPC5XXX_SDRAM_CONFIG1 = 0xc2222600;
-	*(vu_long *)MPC5XXX_SDRAM_CONFIG2 = 0x88b70004;
-
-	/* address select register */
-	*(vu_long *)MPC5XXX_SDRAM_XLBSEL = 0x03000000;
-#endif
+	/* find RAM size using SDRAM CS0 only */
 	sdram_start(0);
 	test1 = get_ram_size((ulong *)CFG_SDRAM_BASE, 0x80000000);
 	sdram_start(1);
@@ -119,11 +116,24 @@ long int initdram (int board_type)
 	} else {
 		dramsize = test2;
 	}
-#if defined(CONFIG_MPC5200)
-	*(vu_long *)MPC5XXX_SDRAM_CS0CFG =
-		(0x13 + __builtin_ffs(dramsize >> 20) - 1);
-#ifdef CONFIG_MPC5200_DDR
+
+	/* memory smaller than 1MB is impossible */
+	if (dramsize < (1 << 20)) {
+		dramsize = 0;
+	}
+	
+	/* set SDRAM CS0 size according to the amount of RAM found */
+	if (dramsize > 0) {
+		*(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x13 + __builtin_ffs(dramsize >> 20) - 1;
+	} else {
+		*(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0; /* disabled */
+	}
+
+	
+	/* let SDRAM CS1 start right after CS0 */
 	*(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize + 0x0000001e;/* 2G */
+
+	/* find RAM size using SDRAM CS1 only */
 	sdram_start(0);
 	test1 = get_ram_size((ulong *)(CFG_SDRAM_BASE + dramsize), 0x80000000);
 	sdram_start(1);
@@ -134,34 +144,94 @@ long int initdram (int board_type)
 	} else {
 		dramsize2 = test2;
 	}
-	*(vu_long *)MPC5XXX_SDRAM_CS1CFG =
-		dramsize + (0x13 + __builtin_ffs(dramsize2 >> 20) - 1);
-#else
-	*(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize; /* disabled */
-#endif
+	
+	/* memory smaller than 1MB is impossible */
+	if (dramsize2 < (1 << 20)) {
+		dramsize2 = 0;
+	}
+	
+	/* set SDRAM CS1 size according to the amount of RAM found */
+	if (dramsize2 > 0) {
+		*(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize
+			| (0x13 + __builtin_ffs(dramsize2 >> 20) - 1);
+	} else {
+		*(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize; /* disabled */
+	}
+
+#else /* CFG_RAMBOOT */
+
+	/* retrieve size of memory connected to SDRAM CS0 */
+	dramsize = *(vu_long *)MPC5XXX_SDRAM_CS0CFG & 0xFF;
+	if (dramsize >= 0x13) {
+		dramsize = (1 << (dramsize - 0x13)) << 20;
+	} else {
+		dramsize = 0;
+	}
+
+	/* retrieve size of memory connected to SDRAM CS1 */
+	dramsize2 = *(vu_long *)MPC5XXX_SDRAM_CS1CFG & 0xFF;
+	if (dramsize2 >= 0x13) {
+		dramsize2 = (1 << (dramsize2 - 0x13)) << 20;
+	} else {
+		dramsize2 = 0;
+	}
+
+#endif /* CFG_RAMBOOT */
+
+	return dramsize + dramsize2;
+}
+
 #elif defined(CONFIG_MGT5100)
-	*(vu_long *)MPC5XXX_SDRAM_STOP = ((dramsize - 1) >> 15);
-#endif
 
-#else	/* CFG_RAMBOOT */
-#ifdef CONFIG_MGT5100
+long int initdram (int board_type)
+{
+	ulong dramsize = 0;
+#ifndef CFG_RAMBOOT
+	ulong test1, test2;
+	
+	/* setup and enable SDRAM chip selects */
+	*(vu_long *)MPC5XXX_SDRAM_START = 0x00000000;
+	*(vu_long *)MPC5XXX_SDRAM_STOP = 0x0000ffff;/* 2G */
 	*(vu_long *)MPC5XXX_ADDECR |= (1 << 22); /* Enable SDRAM */
+	__asm__ volatile ("sync");
+
+	/* setup config registers */
+	*(vu_long *)MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1;
+	*(vu_long *)MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2;
+
+	/* address select register */
+	*(vu_long *)MPC5XXX_SDRAM_XLBSEL = SDRAM_ADDRSEL;
+	__asm__ volatile ("sync");
+
+	/* find RAM size */
+	sdram_start(0);
+	test1 = get_ram_size((ulong *)CFG_SDRAM_BASE, 0x80000000);
+	sdram_start(1);
+	test2 = get_ram_size((ulong *)CFG_SDRAM_BASE, 0x80000000);
+	if (test1 > test2) {
+		sdram_start(0);
+		dramsize = test1;
+	} else {
+		dramsize = test2;
+	}
+
+	/* set SDRAM end address according to size */
+	*(vu_long *)MPC5XXX_SDRAM_STOP = ((dramsize - 1) >> 15);
+	
+#else /* CFG_RAMBOOT */
+
+	/* Retrieve amount of SDRAM available */
 	dramsize = ((*(vu_long *)MPC5XXX_SDRAM_STOP + 1) << 15);
-#else
-	dramsize = ((1 << (*(vu_long *)MPC5XXX_SDRAM_CS0CFG - 0x13)) << 20);
-#ifdef CONFIG_MPC5200_DDR
-	dramsize2 = ((1 << (*(vu_long *)MPC5XXX_SDRAM_CS1CFG - 0x13)) << 20);
-#endif
-#endif
+
 #endif /* CFG_RAMBOOT */
 
-#ifdef CONFIG_MPC5200_DDR
-	dramsize += dramsize2;
-#endif
-	/* return total ram size */
 	return dramsize;
 }
 
+#else
+#error Neither CONFIG_MPC5200 or CONFIG_MGT5100 defined
+#endif
+
 int checkboard (void)
 {
 #if defined(CONFIG_MPC5200)
diff --git a/board/icecube/mt46v16m16-75.h b/board/icecube/mt46v16m16-75.h
new file mode 100644
index 0000000..4c0f9a7
--- /dev/null
+++ b/board/icecube/mt46v16m16-75.h
@@ -0,0 +1,37 @@
+/*
+ * (C) Copyright 2004
+ * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#define SDRAM_DDR	1		/* is DDR */
+
+#if defined(CONFIG_MPC5200)
+/* Settings for XLB = 132 MHz */
+#define SDRAM_MODE	0x018D0000
+#define SDRAM_EMODE	0x40090000
+#define SDRAM_CONTROL	0x705f0f00
+#define SDRAM_CONFIG1	0x73722930
+#define SDRAM_CONFIG2	0x47770000
+#define SDRAM_TAPDELAY	0x10000000
+
+#else
+#error CONFIG_MPC5200 not defined
+#endif
diff --git a/board/icecube/mt48lc16m16a2-75.h b/board/icecube/mt48lc16m16a2-75.h
new file mode 100644
index 0000000..ffdf039
--- /dev/null
+++ b/board/icecube/mt48lc16m16a2-75.h
@@ -0,0 +1,43 @@
+/*
+ * (C) Copyright 2004
+ * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#define SDRAM_DDR	0		/* is SDR */
+
+#if defined(CONFIG_MPC5200)
+/* Settings for XLB = 132 MHz */
+#define SDRAM_MODE	0x00CD0000
+#define SDRAM_CONTROL	0x504F0000
+#define SDRAM_CONFIG1	0xD2322800
+#define SDRAM_CONFIG2	0x8AD70000
+
+#elif defined(CONFIG_MGT5100)
+/* Settings for XLB = 66 MHz */
+#define SDRAM_MODE	0x008D0000
+#define SDRAM_CONTROL	0x504F0000
+#define SDRAM_CONFIG1	0xC2222600
+#define SDRAM_CONFIG2	0x88B70004
+#define SDRAM_ADDRSEL	0x02000000
+
+#else
+#error Neither CONFIG_MPC5200 or CONFIG_MGT5100 defined
+#endif
diff --git a/board/utx8245/utx8245.c b/board/utx8245/utx8245.c
index d870c9f..834fd84 100644
--- a/board/utx8245/utx8245.c
+++ b/board/utx8245/utx8245.c
@@ -67,7 +67,7 @@ long int initdram(int board_type)
 	emear1 = (emear1 & 0xFFFF0000) |
 		((new_bank0_end & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) |
 		((new_bank1_end & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT << 8);
-		
+
 	mpc824x_mpc107_setreg(MEAR1, mear1);
 	mpc824x_mpc107_setreg(EMEAR1, emear1);
 
diff --git a/common/cmd_mii.c b/common/cmd_mii.c
index 4a84829..4539dc5 100644
--- a/common/cmd_mii.c
+++ b/common/cmd_mii.c
@@ -27,10 +27,11 @@
 
 #include <common.h>
 #include <command.h>
-#include <miiphy.h>
-#include <miivals.h>
 
 #if (CONFIG_COMMANDS & CFG_CMD_MII)
+#include <miiphy.h>
+
+#define	CONFIG_TERSE_MII	/* XXX necessary here because "miivals.h" is missing */
 
 #ifdef CONFIG_TERSE_MII
 /*
@@ -145,7 +146,10 @@ U_BOOT_CMD(
 	"mii read  <addr> <reg>        - read  MII PHY <addr> register <reg>\n"
 	"mii write <addr> <reg> <data> - write MII PHY <addr> register <reg>\n"
 );
-#else /* CONFIG_TERSE_MII */
+
+#else /* ! CONFIG_TERSE_MII ================================================= */
+
+#include <miivals.h>
 
 typedef struct _MII_reg_desc_t {
 	ushort regno;
diff --git a/cpu/mpc5xxx/start.S b/cpu/mpc5xxx/start.S
index 559c7f4..e12eee9 100644
--- a/cpu/mpc5xxx/start.S
+++ b/cpu/mpc5xxx/start.S
@@ -103,6 +103,9 @@ boot_cold:
 boot_warm:
 	mfmsr	r5			/* save msr contents		*/
 
+	/* Move CSBoot and adjust instruction pointer                   */
+	/*--------------------------------------------------------------*/
+
 #if defined(CFG_LOWBOOT)
 #if defined(CFG_RAMBOOT)
 #error CFG_LOWBOOT is incompatible with CFG_RAMBOOT
@@ -113,19 +116,15 @@ boot_warm:
 	stw	r3, 0x4(r4)		/* CS0 start */
 	lis	r3,	STOP_REG(CFG_BOOTCS_START, CFG_BOOTCS_SIZE)@h
 	ori	r3, r3, STOP_REG(CFG_BOOTCS_START, CFG_BOOTCS_SIZE)@l
-
 	stw	r3, 0x8(r4)		/* CS0 stop */
-	lis	r3,     0x00047800@h
-	ori	r3, r3, 0x00047800@l
-	stw	r3, 0x300(r4)		/* set timing, CS0/boot conf reg */
 	lis	r3,     0x02010000@h
 	ori	r3, r3, 0x02010000@l
-	stw	r3, 0x54(r4)		/* CS0 and Boot enable, IPBI ctrl reg */
+	stw	r3, 0x54(r4)		/* CS0 and Boot enable */
 
-	lis     r3,	lowboot_reentry@h
-	ori     r3, r3, lowboot_reentry@l
+	lis     r3,	lowboot_reentry@h	/* jump from bootlow address space (0x0000xxxx) */
+	ori     r3, r3, lowboot_reentry@l	/* to the address space the linker used */
 	mtlr	r3
-	blr				/* jump to flash based address */
+	blr
 
 lowboot_reentry:
 	lis	r3,	START_REG(CFG_BOOTCS_START)@h
@@ -134,12 +133,9 @@ lowboot_reentry:
 	lis	r3,	STOP_REG(CFG_BOOTCS_START, CFG_BOOTCS_SIZE)@h
 	ori	r3, r3, STOP_REG(CFG_BOOTCS_START, CFG_BOOTCS_SIZE)@l
 	stw	r3, 0x50(r4)		/* Boot stop */
-	lis	r3,     0x00047800@h
-	ori	r3, r3, 0x00047800@l
-	stw	r3, 0x300(r4)		/* set timing, CS0/boot conf reg */
 	lis	r3,     0x02000001@h
 	ori	r3, r3, 0x02000001@l
-	stw	r3, 0x54(r4)		/* Boot enable, CS0 disable, wait state enable */
+	stw	r3, 0x54(r4)		/* Boot enable, CS0 disable */
 #endif	/* CFG_LOWBOOT */
 
 #if defined(CFG_DEFAULT_MBAR) && !defined(CFG_RAMBOOT)
diff --git a/doc/README.IceCube b/doc/README.IceCube
index 52ad158..5252bc9 100644
--- a/doc/README.IceCube
+++ b/doc/README.IceCube
@@ -1,9 +1,12 @@
 ---------------------------------------------------------------------------
 Build target                Flash address | BDI "go" command | Reset Vector
 ---------------------------------------------------------------------------
-MPC5200LITE                  0xFFF00000   |    0xFFF00100    |   0xFFF00100
-MPC5200LITE_LOWBOOT          0xFF000000   |    0xFF000100    |   0x00000100
-MPC5200LITE_LOWBOOT08        0xFF800000   |    0xFF800100    |   0x00000100
+Lite5200                     0xFFF00000   |    0xFFF00100    |   0xFFF00100
+Lite5200_LOWBOOT             0xFF000000   |    0xFF000100    |   0x00000100
+Lite5200_LOWBOOT08           0xFF800000   |    0xFF800100    |   0x00000100
+icecube_5200                 0xFFF00000   |    0xFFF00100    |   0xFFF00100
+icecube_5200_LOWBOOT         0xFF000000   |    0xFF000100    |   0x00000100
+icecube_5200_LOWBOOT08       0xFF800000   |    0xFF800100    |   0x00000100
 icecube_5200_DDR             0xFFF00000   |    0xFFF00100    |   0xFFF00100
 icecube_5200_DDR_LOWBOOT     0xFF800000   |    0xFF800100    |   0x00000100
 icecube_5200_DDR_LOWBOOT08   0xFF800000   |    0xFF800100    |   0x00000100
diff --git a/drivers/serial_xuartlite.c b/drivers/serial_xuartlite.c
index 3af150d..fcd1593 100644
--- a/drivers/serial_xuartlite.c
+++ b/drivers/serial_xuartlite.c
@@ -23,6 +23,9 @@
  */
 
 #include <config.h>
+
+#ifdef	CONFIG_MICROBLZE
+
 #include <asm/serial_xuartlite.h>
 
 /* FIXME: we should convert these to in32 and out32 */
@@ -70,3 +73,5 @@ int serial_tstc(void)
 {
 	return (IO_SERIAL_STATUS & XUL_SR_RX_FIFO_VALID_DATA);
 }
+
+#endif	/* CONFIG_MICROBLZE */