Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx

48 files changed, 595 insertions, 232 deletions

diff --git a/MAKEALL b/MAKEALL
index 29faaa5..530fe82 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -374,6 +374,7 @@ LIST_85xx="		\
 	MPC8560ADS	\
 	MPC8568MDS	\
 	MPC8572DS	\
+	MPC8572DS_36BIT	\
 	PM854		\
 	PM856		\
 	sbc8540		\
diff --git a/Makefile b/Makefile
index 4aeae07..8c73586 100644
--- a/Makefile
+++ b/Makefile
@@ -2416,8 +2416,14 @@ MPC8555CDS_config:	unconfig
 MPC8568MDS_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8568mds freescale
 
+MPC8572DS_36BIT_config \
 MPC8572DS_config:       unconfig
-	@$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8572ds freescale
+	@mkdir -p $(obj)include
+	@if [ "$(findstring _36BIT_,$@)" ] ; then \
+		echo "#define CONFIG_PHYS_64BIT" >>$(obj)include/config.h ; \
+		$(XECHO) "... enabling 36-bit physical addressing." ; \
+	fi
+	@$(MKCONFIG) -a MPC8572DS ppc mpc85xx mpc8572ds freescale
 
 PM854_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc mpc85xx pm854
diff --git a/board/freescale/mpc8536ds/ddr.c b/board/freescale/mpc8536ds/ddr.c
index 3135d6d..2bad787 100644
--- a/board/freescale/mpc8536ds/ddr.c
+++ b/board/freescale/mpc8536ds/ddr.c
@@ -79,4 +79,10 @@ void fsl_ddr_board_options(memctl_options_t *popts,
 	 *	- number of DIMMs installed
 	 */
 	popts->half_strength_driver_enable = 0;
+
+	/*
+	 * For wake up arp feature, we need enable auto self refresh
+	 */
+	popts->auto_self_refresh_en = 1;
+	popts->sr_it = 0x6;
 }
diff --git a/board/freescale/mpc8536ds/law.c b/board/freescale/mpc8536ds/law.c
index 0861fa7..31614d2 100644
--- a/board/freescale/mpc8536ds/law.c
+++ b/board/freescale/mpc8536ds/law.c
@@ -30,14 +30,14 @@
 struct law_entry law_table[] = {
 	SET_LAW(CONFIG_SYS_PCI1_MEM_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_PCI),
 	SET_LAW(CONFIG_SYS_PCI1_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCI),
-	SET_LAW(CONFIG_SYS_FLASH_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
+	SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
 	SET_LAW(CONFIG_SYS_PCIE1_MEM_PHYS, LAWAR_SIZE_128M, LAW_TRGT_IF_PCIE_1),
 	SET_LAW(CONFIG_SYS_PCIE1_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_1),
 	SET_LAW(CONFIG_SYS_PCIE2_MEM_PHYS, LAWAR_SIZE_128M, LAW_TRGT_IF_PCIE_2),
 	SET_LAW(CONFIG_SYS_PCIE2_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_2),
 	SET_LAW(CONFIG_SYS_PCIE3_MEM_PHYS, LAWAR_SIZE_512M, LAW_TRGT_IF_PCIE_3),
 	SET_LAW(CONFIG_SYS_PCIE3_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_3),
-	SET_LAW(PIXIS_BASE, LAW_SIZE_4K, LAW_TRGT_IF_LBC),
+	SET_LAW(PIXIS_BASE_PHYS, LAW_SIZE_4K, LAW_TRGT_IF_LBC),
 	SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_LBC),
 };
 
diff --git a/board/freescale/mpc8536ds/mpc8536ds.c b/board/freescale/mpc8536ds/mpc8536ds.c
index 2b17612..1e2e2dc 100644
--- a/board/freescale/mpc8536ds/mpc8536ds.c
+++ b/board/freescale/mpc8536ds/mpc8536ds.c
@@ -192,14 +192,14 @@ pci_init_board(void)
 
 		/* outbound memory */
 		pci_set_region(r++,
-			       CONFIG_SYS_PCIE3_MEM_BASE,
+			       CONFIG_SYS_PCIE3_MEM_BUS,
 			       CONFIG_SYS_PCIE3_MEM_PHYS,
 			       CONFIG_SYS_PCIE3_MEM_SIZE,
 			       PCI_REGION_MEM);
 
 		/* outbound io */
 		pci_set_region(r++,
-			       CONFIG_SYS_PCIE3_IO_BASE,
+			       CONFIG_SYS_PCIE3_IO_BUS,
 			       CONFIG_SYS_PCIE3_IO_PHYS,
 			       CONFIG_SYS_PCIE3_IO_SIZE,
 			       PCI_REGION_IO);
@@ -247,22 +247,22 @@ pci_init_board(void)
 
 		/* outbound memory */
 		pci_set_region(r++,
-			       CONFIG_SYS_PCIE1_MEM_BASE,
+			       CONFIG_SYS_PCIE1_MEM_BUS,
 			       CONFIG_SYS_PCIE1_MEM_PHYS,
 			       CONFIG_SYS_PCIE1_MEM_SIZE,
 			       PCI_REGION_MEM);
 
 		/* outbound io */
 		pci_set_region(r++,
-			       CONFIG_SYS_PCIE1_IO_BASE,
+			       CONFIG_SYS_PCIE1_IO_BUS,
 			       CONFIG_SYS_PCIE1_IO_PHYS,
 			       CONFIG_SYS_PCIE1_IO_SIZE,
 			       PCI_REGION_IO);
 
-#ifdef CONFIG_SYS_PCIE1_MEM_BASE2
+#ifdef CONFIG_SYS_PCIE1_MEM_BUS2
 		/* outbound memory */
 		pci_set_region(r++,
-			       CONFIG_SYS_PCIE1_MEM_BASE2,
+			       CONFIG_SYS_PCIE1_MEM_BUS2,
 			       CONFIG_SYS_PCIE1_MEM_PHYS2,
 			       CONFIG_SYS_PCIE1_MEM_SIZE2,
 			       PCI_REGION_MEM);
@@ -310,22 +310,22 @@ pci_init_board(void)
 
 		/* outbound memory */
 		pci_set_region(r++,
-			       CONFIG_SYS_PCIE2_MEM_BASE,
+			       CONFIG_SYS_PCIE2_MEM_BUS,
 			       CONFIG_SYS_PCIE2_MEM_PHYS,
 			       CONFIG_SYS_PCIE2_MEM_SIZE,
 			       PCI_REGION_MEM);
 
 		/* outbound io */
 		pci_set_region(r++,
-			       CONFIG_SYS_PCIE2_IO_BASE,
+			       CONFIG_SYS_PCIE2_IO_BUS,
 			       CONFIG_SYS_PCIE2_IO_PHYS,
 			       CONFIG_SYS_PCIE2_IO_SIZE,
 			       PCI_REGION_IO);
 
-#ifdef CONFIG_SYS_PCIE2_MEM_BASE2
+#ifdef CONFIG_SYS_PCIE2_MEM_BUS2
 		/* outbound memory */
 		pci_set_region(r++,
-			       CONFIG_SYS_PCIE2_MEM_BASE2,
+			       CONFIG_SYS_PCIE2_MEM_BUS2,
 			       CONFIG_SYS_PCIE2_MEM_PHYS2,
 			       CONFIG_SYS_PCIE2_MEM_SIZE2,
 			       PCI_REGION_MEM);
@@ -378,22 +378,22 @@ pci_init_board(void)
 
 		/* outbound memory */
 		pci_set_region(r++,
-			       CONFIG_SYS_PCI1_MEM_BASE,
+			       CONFIG_SYS_PCI1_MEM_BUS,
 			       CONFIG_SYS_PCI1_MEM_PHYS,
 			       CONFIG_SYS_PCI1_MEM_SIZE,
 			       PCI_REGION_MEM);
 
 		/* outbound io */
 		pci_set_region(r++,
-			       CONFIG_SYS_PCI1_IO_BASE,
+			       CONFIG_SYS_PCI1_IO_BUS,
 			       CONFIG_SYS_PCI1_IO_PHYS,
 			       CONFIG_SYS_PCI1_IO_SIZE,
 			       PCI_REGION_IO);
 
-#ifdef CONFIG_SYS_PCI1_MEM_BASE2
+#ifdef CONFIG_SYS_PCI1_MEM_BUS2
 		/* outbound memory */
 		pci_set_region(r++,
-			       CONFIG_SYS_PCI1_MEM_BASE2,
+			       CONFIG_SYS_PCI1_MEM_BUS2,
 			       CONFIG_SYS_PCI1_MEM_PHYS2,
 			       CONFIG_SYS_PCI1_MEM_SIZE2,
 			       PCI_REGION_MEM);
@@ -433,7 +433,7 @@ int board_early_init_r(void)
 	/* invalidate existing TLB entry for flash + promjet */
 	disable_tlb(flash_esel);
 
-	set_tlb(1, flashbase, flashbase,		/* tlb, epn, rpn */
+	set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS,	/* tlb, epn, rpn */
 		MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,	/* perms, wimge */
 		0, flash_esel, BOOKE_PAGESZ_256M, 1);	/* ts, esel, tsize, iprot */
 
diff --git a/board/freescale/mpc8536ds/tlb.c b/board/freescale/mpc8536ds/tlb.c
index c81a959..35a13d4 100644
--- a/board/freescale/mpc8536ds/tlb.c
+++ b/board/freescale/mpc8536ds/tlb.c
@@ -41,7 +41,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 0, BOOKE_PAGESZ_4K, 0),
 
-	SET_TLB_ENTRY(0, PIXIS_BASE, PIXIS_BASE,
+	SET_TLB_ENTRY(0, PIXIS_BASE, PIXIS_BASE_PHYS,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 0, BOOKE_PAGESZ_4K, 0),
 
@@ -53,17 +53,17 @@ struct fsl_e_tlb_entry tlb_table[] = {
 
 	/* W**G* - Flash/promjet, localbus */
 	/* This will be changed to *I*G* after relocation to RAM. */
-	SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE,
+	SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS,
 		      MAS3_SX|MAS3_SR, MAS2_W|MAS2_G,
 		      0, 1, BOOKE_PAGESZ_256M, 1),
 
 	/* *I*G* - PCI */
-	SET_TLB_ENTRY(1, CONFIG_SYS_PCI1_MEM_PHYS, CONFIG_SYS_PCI1_MEM_PHYS,
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCI1_MEM_VIRT, CONFIG_SYS_PCI1_MEM_PHYS,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 2, BOOKE_PAGESZ_1G, 1),
 
 	/* *I*G* - PCI I/O */
-	SET_TLB_ENTRY(1, CONFIG_SYS_PCI1_IO_PHYS, CONFIG_SYS_PCI1_IO_PHYS,
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCI1_IO_VIRT, CONFIG_SYS_PCI1_IO_PHYS,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 3, BOOKE_PAGESZ_256K, 1),
 
diff --git a/board/freescale/mpc8540ads/ddr.c b/board/freescale/mpc8540ads/ddr.c
index 7850794..93d1100 100644
--- a/board/freescale/mpc8540ads/ddr.c
+++ b/board/freescale/mpc8540ads/ddr.c
@@ -65,6 +65,9 @@ void fsl_ddr_board_options(memctl_options_t *popts,
 	 */
 	popts->write_data_delay = 3;
 
+	/* 2T timing enable */
+	popts->twoT_en = 1;
+
 	/*
 	 * Factors to consider for half-strength driver enable:
 	 *	- number of DIMMs installed
diff --git a/board/freescale/mpc8540ads/law.c b/board/freescale/mpc8540ads/law.c
index 7dd8f29..f5644e1 100644
--- a/board/freescale/mpc8540ads/law.c
+++ b/board/freescale/mpc8540ads/law.c
@@ -52,7 +52,7 @@ struct law_entry law_table[] = {
 	/* This is not so much the SDRAM map as it is the whole localbus map. */
 	SET_LAW(CONFIG_SYS_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
 	SET_LAW(CONFIG_SYS_PCI1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI),
-	SET_LAW(CONFIG_SYS_RIO_MEM_BASE, LAWAR_SIZE_512M, LAW_TRGT_IF_RIO),
+	SET_LAW(CONFIG_SYS_RIO_MEM_PHYS, LAWAR_SIZE_512M, LAW_TRGT_IF_RIO),
 };
 
 int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/freescale/mpc8540ads/tlb.c b/board/freescale/mpc8540ads/tlb.c
index 2ec3ccc..a9925d5 100644
--- a/board/freescale/mpc8540ads/tlb.c
+++ b/board/freescale/mpc8540ads/tlb.c
@@ -54,7 +54,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 1:	256M	Non-cacheable, guarded
 	 * 0x80000000	256M	PCI1 MEM First half
 	 */
-	SET_TLB_ENTRY(1, CONFIG_SYS_PCI1_MEM_PHYS, CONFIG_SYS_PCI1_MEM_PHYS,
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCI1_MEM_VIRT, CONFIG_SYS_PCI1_MEM_PHYS,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 1, BOOKE_PAGESZ_256M, 1),
 
@@ -62,7 +62,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 2:	256M	Non-cacheable, guarded
 	 * 0x90000000	256M	PCI1 MEM Second half
 	 */
-	SET_TLB_ENTRY(1, CONFIG_SYS_PCI1_MEM_PHYS + 0x10000000, CONFIG_SYS_PCI1_MEM_PHYS + 0x10000000,
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCI1_MEM_VIRT + 0x10000000, CONFIG_SYS_PCI1_MEM_PHYS + 0x10000000,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 2, BOOKE_PAGESZ_256M, 1),
 
@@ -70,7 +70,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 3:	256M	Non-cacheable, guarded
 	 * 0xc0000000	256M	Rapid IO MEM First half
 	 */
-	SET_TLB_ENTRY(1, CONFIG_SYS_RIO_MEM_BASE, CONFIG_SYS_RIO_MEM_BASE,
+	SET_TLB_ENTRY(1, CONFIG_SYS_RIO_MEM_VIRT, CONFIG_SYS_RIO_MEM_PHYS,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 3, BOOKE_PAGESZ_256M, 1),
 
@@ -78,7 +78,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 4:	256M	Non-cacheable, guarded
 	 * 0xd0000000	256M	Rapid IO MEM Second half
 	 */
-	SET_TLB_ENTRY(1, CONFIG_SYS_RIO_MEM_BASE + 0x10000000, CONFIG_SYS_RIO_MEM_BASE + 0x10000000,
+	SET_TLB_ENTRY(1, CONFIG_SYS_RIO_MEM_VIRT + 0x10000000, CONFIG_SYS_RIO_MEM_PHYS + 0x10000000,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 4, BOOKE_PAGESZ_256M, 1),
 
diff --git a/board/freescale/mpc8541cds/tlb.c b/board/freescale/mpc8541cds/tlb.c
index bf957c0..ae6812f 100644
--- a/board/freescale/mpc8541cds/tlb.c
+++ b/board/freescale/mpc8541cds/tlb.c
@@ -54,7 +54,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 1:	256M	Non-cacheable, guarded
 	 * 0x80000000	256M	PCI1 MEM First half
 	 */
-	SET_TLB_ENTRY(1, CONFIG_SYS_PCI1_MEM_PHYS, CONFIG_SYS_PCI1_MEM_PHYS,
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCI1_MEM_VIRT, CONFIG_SYS_PCI1_MEM_PHYS,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 1, BOOKE_PAGESZ_256M, 1),
 
@@ -62,7 +62,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 2:	256M	Non-cacheable, guarded
 	 * 0x90000000	256M	PCI1 MEM Second half
 	 */
-	SET_TLB_ENTRY(1, CONFIG_SYS_PCI1_MEM_PHYS + 0x10000000, CONFIG_SYS_PCI1_MEM_PHYS + 0x10000000,
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCI1_MEM_VIRT + 0x10000000, CONFIG_SYS_PCI1_MEM_PHYS + 0x10000000,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 2, BOOKE_PAGESZ_256M, 1),
 
@@ -70,7 +70,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 3:	256M	Non-cacheable, guarded
 	 * 0xa0000000	256M	PCI2 MEM First half
 	 */
-	SET_TLB_ENTRY(1, CONFIG_SYS_PCI2_MEM_PHYS, CONFIG_SYS_PCI2_MEM_PHYS,
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCI2_MEM_VIRT, CONFIG_SYS_PCI2_MEM_PHYS,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 3, BOOKE_PAGESZ_256M, 1),
 
@@ -78,7 +78,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 4:	256M	Non-cacheable, guarded
 	 * 0xb0000000	256M	PCI2 MEM Second half
 	 */
-	SET_TLB_ENTRY(1, CONFIG_SYS_PCI2_MEM_PHYS + 0x10000000, CONFIG_SYS_PCI2_MEM_PHYS + 0x10000000,
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCI2_MEM_VIRT + 0x10000000, CONFIG_SYS_PCI2_MEM_PHYS + 0x10000000,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 4, BOOKE_PAGESZ_256M, 1),
 
diff --git a/board/freescale/mpc8544ds/ddr.c b/board/freescale/mpc8544ds/ddr.c
index 34f84a2..b8330eb 100644
--- a/board/freescale/mpc8544ds/ddr.c
+++ b/board/freescale/mpc8544ds/ddr.c
@@ -75,6 +75,9 @@ void fsl_ddr_board_options(memctl_options_t *popts,
 	 */
 	popts->write_data_delay = 3;
 
+	/* 2T timing enable */
+	popts->twoT_en = 1;
+
 	/*
 	 * Factors to consider for half-strength driver enable:
 	 *	- number of DIMMs installed
diff --git a/board/freescale/mpc8544ds/mpc8544ds.c b/board/freescale/mpc8544ds/mpc8544ds.c
index 9777312..7ff5a9b 100644
--- a/board/freescale/mpc8544ds/mpc8544ds.c
+++ b/board/freescale/mpc8544ds/mpc8544ds.c
@@ -139,22 +139,22 @@ pci_init_board(void)
 
 		/* outbound memory */
 		pci_set_region(r++,
-			       CONFIG_SYS_PCIE3_MEM_BASE,
+			       CONFIG_SYS_PCIE3_MEM_BUS,
 			       CONFIG_SYS_PCIE3_MEM_PHYS,
 			       CONFIG_SYS_PCIE3_MEM_SIZE,
 			       PCI_REGION_MEM);
 
 		/* outbound io */
 		pci_set_region(r++,
-			       CONFIG_SYS_PCIE3_IO_BASE,
+			       CONFIG_SYS_PCIE3_IO_BUS,
 			       CONFIG_SYS_PCIE3_IO_PHYS,
 			       CONFIG_SYS_PCIE3_IO_SIZE,
 			       PCI_REGION_IO);
 
-#ifdef CONFIG_SYS_PCIE3_MEM_BASE2
+#ifdef CONFIG_SYS_PCIE3_MEM_BUS2
 		/* outbound memory */
 		pci_set_region(r++,
-			       CONFIG_SYS_PCIE3_MEM_BASE2,
+			       CONFIG_SYS_PCIE3_MEM_BUS2,
 			       CONFIG_SYS_PCIE3_MEM_PHYS2,
 			       CONFIG_SYS_PCIE3_MEM_SIZE2,
 			       PCI_REGION_MEM);
@@ -173,7 +173,7 @@ pci_init_board(void)
 		 * Activate ULI1575 legacy chip by performing a fake
 		 * memory access.  Needed to make ULI RTC work.
 		 */
-		in_be32((u32 *)CONFIG_SYS_PCIE3_MEM_BASE);
+		in_be32((u32 *)CONFIG_SYS_PCIE3_MEM_BUS);
 	} else {
 		printf ("    PCIE3: disabled\n");
 	}
@@ -206,22 +206,22 @@ pci_init_board(void)
 
 		/* outbound memory */
 		pci_set_region(r++,
-			       CONFIG_SYS_PCIE1_MEM_BASE,
+			       CONFIG_SYS_PCIE1_MEM_BUS,
 			       CONFIG_SYS_PCIE1_MEM_PHYS,
 			       CONFIG_SYS_PCIE1_MEM_SIZE,
 			       PCI_REGION_MEM);
 
 		/* outbound io */
 		pci_set_region(r++,
-			       CONFIG_SYS_PCIE1_IO_BASE,
+			       CONFIG_SYS_PCIE1_IO_BUS,
 			       CONFIG_SYS_PCIE1_IO_PHYS,
 			       CONFIG_SYS_PCIE1_IO_SIZE,
 			       PCI_REGION_IO);
 
-#ifdef CONFIG_SYS_PCIE1_MEM_BASE2
+#ifdef CONFIG_SYS_PCIE1_MEM_BUS2
 		/* outbound memory */
 		pci_set_region(r++,
-			       CONFIG_SYS_PCIE1_MEM_BASE2,
+			       CONFIG_SYS_PCIE1_MEM_BUS2,
 			       CONFIG_SYS_PCIE1_MEM_PHYS2,
 			       CONFIG_SYS_PCIE1_MEM_SIZE2,
 			       PCI_REGION_MEM);
@@ -269,22 +269,22 @@ pci_init_board(void)
 
 		/* outbound memory */
 		pci_set_region(r++,
-			       CONFIG_SYS_PCIE2_MEM_BASE,
+			       CONFIG_SYS_PCIE2_MEM_BUS,
 			       CONFIG_SYS_PCIE2_MEM_PHYS,
 			       CONFIG_SYS_PCIE2_MEM_SIZE,
 			       PCI_REGION_MEM);
 
 		/* outbound io */
 		pci_set_region(r++,
-			       CONFIG_SYS_PCIE2_IO_BASE,
+			       CONFIG_SYS_PCIE2_IO_BUS,
 			       CONFIG_SYS_PCIE2_IO_PHYS,
 			       CONFIG_SYS_PCIE2_IO_SIZE,
 			       PCI_REGION_IO);
 
-#ifdef CONFIG_SYS_PCIE2_MEM_BASE2
+#ifdef CONFIG_SYS_PCIE2_MEM_BUS2
 		/* outbound memory */
 		pci_set_region(r++,
-			       CONFIG_SYS_PCIE2_MEM_BASE2,
+			       CONFIG_SYS_PCIE2_MEM_BUS2,
 			       CONFIG_SYS_PCIE2_MEM_PHYS2,
 			       CONFIG_SYS_PCIE2_MEM_SIZE2,
 			       PCI_REGION_MEM);
@@ -337,22 +337,22 @@ pci_init_board(void)
 
 		/* outbound memory */
 		pci_set_region(r++,
-			       CONFIG_SYS_PCI1_MEM_BASE,
+			       CONFIG_SYS_PCI1_MEM_BUS,
 			       CONFIG_SYS_PCI1_MEM_PHYS,
 			       CONFIG_SYS_PCI1_MEM_SIZE,
 			       PCI_REGION_MEM);
 
 		/* outbound io */
 		pci_set_region(r++,
-			       CONFIG_SYS_PCI1_IO_BASE,
+			       CONFIG_SYS_PCI1_IO_BUS,
 			       CONFIG_SYS_PCI1_IO_PHYS,
 			       CONFIG_SYS_PCI1_IO_SIZE,
 			       PCI_REGION_IO);
 
-#ifdef CONFIG_SYS_PCIE3_MEM_BASE2
+#ifdef CONFIG_SYS_PCIE3_MEM_BUS2
 		/* outbound memory */
 		pci_set_region(r++,
-			       CONFIG_SYS_PCIE3_MEM_BASE2,
+			       CONFIG_SYS_PCIE3_MEM_BUS2,
 			       CONFIG_SYS_PCIE3_MEM_PHYS2,
 			       CONFIG_SYS_PCIE3_MEM_SIZE2,
 			       PCI_REGION_MEM);
diff --git a/board/freescale/mpc8544ds/tlb.c b/board/freescale/mpc8544ds/tlb.c
index c7442b2..d99441b 100644
--- a/board/freescale/mpc8544ds/tlb.c
+++ b/board/freescale/mpc8544ds/tlb.c
@@ -52,21 +52,21 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 1:	1G	Non-cacheable, guarded
 	 * 0x80000000	1G	PCIE  8,9,a,b
 	 */
-	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE_PHYS, CONFIG_SYS_PCIE_PHYS,
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE_VIRT, CONFIG_SYS_PCIE_PHYS,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 1, BOOKE_PAGESZ_1G, 1),
 
 	/*
 	 * TLB 2:	256M	Non-cacheable, guarded
 	 */
-	SET_TLB_ENTRY(1, CONFIG_SYS_PCI_PHYS, CONFIG_SYS_PCI_PHYS,
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCI_VIRT, CONFIG_SYS_PCI_PHYS,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 2, BOOKE_PAGESZ_256M, 1),
 
 	/*
 	 * TLB 3:	256M	Non-cacheable, guarded
 	 */
-	SET_TLB_ENTRY(1, CONFIG_SYS_PCI_PHYS + 0x10000000, CONFIG_SYS_PCI_PHYS + 0x10000000,
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCI_VIRT + 0x10000000, CONFIG_SYS_PCI_PHYS + 0x10000000,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 3, BOOKE_PAGESZ_256M, 1),
 
diff --git a/board/freescale/mpc8548cds/mpc8548cds.c b/board/freescale/mpc8548cds/mpc8548cds.c
index 90e89bc..70320ea 100644
--- a/board/freescale/mpc8548cds/mpc8548cds.c
+++ b/board/freescale/mpc8548cds/mpc8548cds.c
@@ -306,14 +306,14 @@ pci_init_board(void)
 
 		/* outbound memory */
 		pci_set_region(r++,
-			       CONFIG_SYS_PCI1_MEM_BASE,
+			       CONFIG_SYS_PCI1_MEM_BUS,
 			       CONFIG_SYS_PCI1_MEM_PHYS,
 			       CONFIG_SYS_PCI1_MEM_SIZE,
 			       PCI_REGION_MEM);
 
 		/* outbound io */
 		pci_set_region(r++,
-			       CONFIG_SYS_PCI1_IO_BASE,
+			       CONFIG_SYS_PCI1_IO_BUS,
 			       CONFIG_SYS_PCI1_IO_PHYS,
 			       CONFIG_SYS_PCI1_IO_SIZE,
 			       PCI_REGION_IO);
@@ -390,14 +390,14 @@ pci_init_board(void)
 
 		/* outbound memory */
 		pci_set_region(r++,
-			       CONFIG_SYS_PCIE1_MEM_BASE,
+			       CONFIG_SYS_PCIE1_MEM_BUS,
 			       CONFIG_SYS_PCIE1_MEM_PHYS,
 			       CONFIG_SYS_PCIE1_MEM_SIZE,
 			       PCI_REGION_MEM);
 
 		/* outbound io */
 		pci_set_region(r++,
-			       CONFIG_SYS_PCIE1_IO_BASE,
+			       CONFIG_SYS_PCIE1_IO_BUS,
 			       CONFIG_SYS_PCIE1_IO_PHYS,
 			       CONFIG_SYS_PCIE1_IO_SIZE,
 			       PCI_REGION_IO);
diff --git a/board/freescale/mpc8548cds/tlb.c b/board/freescale/mpc8548cds/tlb.c
index eab212a..2267ad7 100644
--- a/board/freescale/mpc8548cds/tlb.c
+++ b/board/freescale/mpc8548cds/tlb.c
@@ -54,7 +54,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 1:	1G	Non-cacheable, guarded
 	 * 0x80000000	1G	PCI1/PCIE  8,9,a,b
 	 */
-	SET_TLB_ENTRY(1, CONFIG_SYS_PCI_PHYS, CONFIG_SYS_PCI_PHYS,
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCI_VIRT, CONFIG_SYS_PCI_PHYS,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 1, BOOKE_PAGESZ_1G, 1),
 
@@ -62,14 +62,14 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	/*
 	 * TLB 2:	256M	Non-cacheable, guarded
 	 */
-	SET_TLB_ENTRY(1, CONFIG_SYS_RIO_MEM_BASE, CONFIG_SYS_RIO_MEM_BASE,
+	SET_TLB_ENTRY(1, CONFIG_SYS_RIO_MEM_VIRT, CONFIG_SYS_RIO_MEM_PHYS,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 2, BOOKE_PAGESZ_256M, 1),
 
 	/*
 	 * TLB 3:	256M	Non-cacheable, guarded
 	 */
-	SET_TLB_ENTRY(1, CONFIG_SYS_RIO_MEM_BASE + 0x10000000, CONFIG_SYS_RIO_MEM_BASE + 0x10000000,
+	SET_TLB_ENTRY(1, CONFIG_SYS_RIO_MEM_VIRT + 0x10000000, CONFIG_SYS_RIO_MEM_PHYS + 0x10000000,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 3, BOOKE_PAGESZ_256M, 1),
 #endif
diff --git a/board/freescale/mpc8555cds/tlb.c b/board/freescale/mpc8555cds/tlb.c
index bf957c0..ae6812f 100644
--- a/board/freescale/mpc8555cds/tlb.c
+++ b/board/freescale/mpc8555cds/tlb.c
@@ -54,7 +54,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 1:	256M	Non-cacheable, guarded
 	 * 0x80000000	256M	PCI1 MEM First half
 	 */
-	SET_TLB_ENTRY(1, CONFIG_SYS_PCI1_MEM_PHYS, CONFIG_SYS_PCI1_MEM_PHYS,
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCI1_MEM_VIRT, CONFIG_SYS_PCI1_MEM_PHYS,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 1, BOOKE_PAGESZ_256M, 1),
 
@@ -62,7 +62,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 2:	256M	Non-cacheable, guarded
 	 * 0x90000000	256M	PCI1 MEM Second half
 	 */
-	SET_TLB_ENTRY(1, CONFIG_SYS_PCI1_MEM_PHYS + 0x10000000, CONFIG_SYS_PCI1_MEM_PHYS + 0x10000000,
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCI1_MEM_VIRT + 0x10000000, CONFIG_SYS_PCI1_MEM_PHYS + 0x10000000,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 2, BOOKE_PAGESZ_256M, 1),
 
@@ -70,7 +70,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 3:	256M	Non-cacheable, guarded
 	 * 0xa0000000	256M	PCI2 MEM First half
 	 */
-	SET_TLB_ENTRY(1, CONFIG_SYS_PCI2_MEM_PHYS, CONFIG_SYS_PCI2_MEM_PHYS,
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCI2_MEM_VIRT, CONFIG_SYS_PCI2_MEM_PHYS,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 3, BOOKE_PAGESZ_256M, 1),
 
@@ -78,7 +78,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 4:	256M	Non-cacheable, guarded
 	 * 0xb0000000	256M	PCI2 MEM Second half
 	 */
-	SET_TLB_ENTRY(1, CONFIG_SYS_PCI2_MEM_PHYS + 0x10000000, CONFIG_SYS_PCI2_MEM_PHYS + 0x10000000,
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCI2_MEM_VIRT + 0x10000000, CONFIG_SYS_PCI2_MEM_PHYS + 0x10000000,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 4, BOOKE_PAGESZ_256M, 1),
 
diff --git a/board/freescale/mpc8560ads/ddr.c b/board/freescale/mpc8560ads/ddr.c
index 7850794..93d1100 100644
--- a/board/freescale/mpc8560ads/ddr.c
+++ b/board/freescale/mpc8560ads/ddr.c
@@ -65,6 +65,9 @@ void fsl_ddr_board_options(memctl_options_t *popts,
 	 */
 	popts->write_data_delay = 3;
 
+	/* 2T timing enable */
+	popts->twoT_en = 1;
+
 	/*
 	 * Factors to consider for half-strength driver enable:
 	 *	- number of DIMMs installed
diff --git a/board/freescale/mpc8560ads/law.c b/board/freescale/mpc8560ads/law.c
index 7dd8f29..f5644e1 100644
--- a/board/freescale/mpc8560ads/law.c
+++ b/board/freescale/mpc8560ads/law.c
@@ -52,7 +52,7 @@ struct law_entry law_table[] = {
 	/* This is not so much the SDRAM map as it is the whole localbus map. */
 	SET_LAW(CONFIG_SYS_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
 	SET_LAW(CONFIG_SYS_PCI1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI),
-	SET_LAW(CONFIG_SYS_RIO_MEM_BASE, LAWAR_SIZE_512M, LAW_TRGT_IF_RIO),
+	SET_LAW(CONFIG_SYS_RIO_MEM_PHYS, LAWAR_SIZE_512M, LAW_TRGT_IF_RIO),
 };
 
 int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/freescale/mpc8560ads/tlb.c b/board/freescale/mpc8560ads/tlb.c
index 2ec3ccc..a9925d5 100644
--- a/board/freescale/mpc8560ads/tlb.c
+++ b/board/freescale/mpc8560ads/tlb.c
@@ -54,7 +54,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 1:	256M	Non-cacheable, guarded
 	 * 0x80000000	256M	PCI1 MEM First half
 	 */
-	SET_TLB_ENTRY(1, CONFIG_SYS_PCI1_MEM_PHYS, CONFIG_SYS_PCI1_MEM_PHYS,
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCI1_MEM_VIRT, CONFIG_SYS_PCI1_MEM_PHYS,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 1, BOOKE_PAGESZ_256M, 1),
 
@@ -62,7 +62,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 2:	256M	Non-cacheable, guarded
 	 * 0x90000000	256M	PCI1 MEM Second half
 	 */
-	SET_TLB_ENTRY(1, CONFIG_SYS_PCI1_MEM_PHYS + 0x10000000, CONFIG_SYS_PCI1_MEM_PHYS + 0x10000000,
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCI1_MEM_VIRT + 0x10000000, CONFIG_SYS_PCI1_MEM_PHYS + 0x10000000,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 2, BOOKE_PAGESZ_256M, 1),
 
@@ -70,7 +70,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 3:	256M	Non-cacheable, guarded
 	 * 0xc0000000	256M	Rapid IO MEM First half
 	 */
-	SET_TLB_ENTRY(1, CONFIG_SYS_RIO_MEM_BASE, CONFIG_SYS_RIO_MEM_BASE,
+	SET_TLB_ENTRY(1, CONFIG_SYS_RIO_MEM_VIRT, CONFIG_SYS_RIO_MEM_PHYS,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 3, BOOKE_PAGESZ_256M, 1),
 
@@ -78,7 +78,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * TLB 4:	256M	Non-cacheable, guarded
 	 * 0xd0000000	256M	Rapid IO MEM Second half
 	 */
-	SET_TLB_ENTRY(1, CONFIG_SYS_RIO_MEM_BASE + 0x10000000, CONFIG_SYS_RIO_MEM_BASE + 0x10000000,
+	SET_TLB_ENTRY(1, CONFIG_SYS_RIO_MEM_VIRT + 0x10000000, CONFIG_SYS_RIO_MEM_PHYS + 0x10000000,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 4, BOOKE_PAGESZ_256M, 1),
 
diff --git a/board/freescale/mpc8568mds/law.c b/board/freescale/mpc8568mds/law.c
index da7b6dc..3114e8a 100644
--- a/board/freescale/mpc8568mds/law.c
+++ b/board/freescale/mpc8568mds/law.c
@@ -54,7 +54,7 @@ struct law_entry law_table[] = {
 	SET_LAW(CONFIG_SYS_PCIE1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCIE_1),
 	SET_LAW(CONFIG_SYS_PCI1_IO_PHYS, LAW_SIZE_8M, LAW_TRGT_IF_PCI),
 	SET_LAW(CONFIG_SYS_PCIE1_IO_PHYS, LAW_SIZE_8M, LAW_TRGT_IF_PCIE_1),
-	SET_LAW(CONFIG_SYS_SRIO_MEM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_RIO),
+	SET_LAW(CONFIG_SYS_SRIO_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_RIO),
 	/* LBC window - maps 256M.  That's SDRAM, BCSR, PIBs, and Flash */
 	SET_LAW(CONFIG_SYS_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
 };
diff --git a/board/freescale/mpc8568mds/mpc8568mds.c b/board/freescale/mpc8568mds/mpc8568mds.c
index 7a23b33..915fae7 100644
--- a/board/freescale/mpc8568mds/mpc8568mds.c
+++ b/board/freescale/mpc8568mds/mpc8568mds.c
@@ -397,14 +397,14 @@ pci_init_board(void)
 
 		/* outbound memory */
 		pci_set_region(r++,
-				CONFIG_SYS_PCI1_MEM_BASE,
+				CONFIG_SYS_PCI1_MEM_BUS,
 				CONFIG_SYS_PCI1_MEM_PHYS,
 				CONFIG_SYS_PCI1_MEM_SIZE,
 				PCI_REGION_MEM);
 
 		/* outbound io */
 		pci_set_region(r++,
-				CONFIG_SYS_PCI1_IO_BASE,
+				CONFIG_SYS_PCI1_IO_BUS,
 				CONFIG_SYS_PCI1_IO_PHYS,
 				CONFIG_SYS_PCI1_IO_SIZE,
 				PCI_REGION_IO);
@@ -450,14 +450,14 @@ pci_init_board(void)
 
 		/* outbound memory */
 		pci_set_region(r++,
-				CONFIG_SYS_PCIE1_MEM_BASE,
+				CONFIG_SYS_PCIE1_MEM_BUS,
 				CONFIG_SYS_PCIE1_MEM_PHYS,
 				CONFIG_SYS_PCIE1_MEM_SIZE,
 				PCI_REGION_MEM);
 
 		/* outbound io */
 		pci_set_region(r++,
-				CONFIG_SYS_PCIE1_IO_BASE,
+				CONFIG_SYS_PCIE1_IO_BUS,
 				CONFIG_SYS_PCIE1_IO_PHYS,
 				CONFIG_SYS_PCIE1_IO_SIZE,
 				PCI_REGION_IO);
diff --git a/board/freescale/mpc8568mds/tlb.c b/board/freescale/mpc8568mds/tlb.c
index 1077552..8470c87 100644
--- a/board/freescale/mpc8568mds/tlb.c
+++ b/board/freescale/mpc8568mds/tlb.c
@@ -64,7 +64,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 * 0x80000000	512M	PCI1 MEM
 	 * 0xa0000000	512M	PCIe MEM
 	 */
-	SET_TLB_ENTRY(1, CONFIG_SYS_PCI1_MEM_PHYS, CONFIG_SYS_PCI1_MEM_PHYS,
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCI1_MEM_VIRT, CONFIG_SYS_PCI1_MEM_PHYS,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 2, BOOKE_PAGESZ_1G, 1),
 
diff --git a/board/freescale/mpc8572ds/law.c b/board/freescale/mpc8572ds/law.c
index 83eb681..02ea0ec 100644
--- a/board/freescale/mpc8572ds/law.c
+++ b/board/freescale/mpc8572ds/law.c
@@ -28,14 +28,14 @@
 #include <asm/mmu.h>
 
 struct law_entry law_table[] = {
-	SET_LAW(CONFIG_SYS_FLASH_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
+	SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
 	SET_LAW(CONFIG_SYS_PCIE1_MEM_PHYS, LAWAR_SIZE_512M, LAW_TRGT_IF_PCIE_1),
 	SET_LAW(CONFIG_SYS_PCIE1_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_1),
 	SET_LAW(CONFIG_SYS_PCIE2_MEM_PHYS, LAWAR_SIZE_512M, LAW_TRGT_IF_PCIE_2),
 	SET_LAW(CONFIG_SYS_PCIE2_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_2),
 	SET_LAW(CONFIG_SYS_PCIE3_MEM_PHYS, LAWAR_SIZE_512M, LAW_TRGT_IF_PCIE_3),
 	SET_LAW(CONFIG_SYS_PCIE3_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_3),
-	SET_LAW(PIXIS_BASE, LAW_SIZE_4K, LAW_TRGT_IF_LBC),
+	SET_LAW(PIXIS_BASE_PHYS, LAW_SIZE_4K, LAW_TRGT_IF_LBC),
 	SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_LBC),
 };
 
diff --git a/board/freescale/mpc8572ds/mpc8572ds.c b/board/freescale/mpc8572ds/mpc8572ds.c
index c2487e5..e57f9ff 100644
--- a/board/freescale/mpc8572ds/mpc8572ds.c
+++ b/board/freescale/mpc8572ds/mpc8572ds.c
@@ -185,14 +185,14 @@ void pci_init_board(void)
 
 			/* outbound memory */
 			pci_set_region(r++,
-					CONFIG_SYS_PCIE3_MEM_BASE,
+					CONFIG_SYS_PCIE3_MEM_BUS,
 					CONFIG_SYS_PCIE3_MEM_PHYS,
 					CONFIG_SYS_PCIE3_MEM_SIZE,
 					PCI_REGION_MEM);
 
 			/* outbound io */
 			pci_set_region(r++,
-					CONFIG_SYS_PCIE3_IO_BASE,
+					CONFIG_SYS_PCIE3_IO_BUS,
 					CONFIG_SYS_PCIE3_IO_PHYS,
 					CONFIG_SYS_PCIE3_IO_SIZE,
 					PCI_REGION_IO);
@@ -215,7 +215,7 @@ void pci_init_board(void)
 
 			pci_hose_read_config_dword(hose, PCI_BDF(2, 0x1d, 0 ),
 					PCI_BASE_ADDRESS_1, &temp32);
-			if (temp32 >= CONFIG_SYS_PCIE3_MEM_PHYS) {
+			if (temp32 >= CONFIG_SYS_PCIE3_MEM_BUS) {
 				debug(" uli1572 read to %x\n", temp32);
 				in_be32((unsigned *)temp32);
 			}
@@ -252,14 +252,14 @@ void pci_init_board(void)
 
 			/* outbound memory */
 			pci_set_region(r++,
-					CONFIG_SYS_PCIE2_MEM_BASE,
+					CONFIG_SYS_PCIE2_MEM_BUS,
 					CONFIG_SYS_PCIE2_MEM_PHYS,
 					CONFIG_SYS_PCIE2_MEM_SIZE,
 					PCI_REGION_MEM);
 
 			/* outbound io */
 			pci_set_region(r++,
-					CONFIG_SYS_PCIE2_IO_BASE,
+					CONFIG_SYS_PCIE2_IO_BUS,
 					CONFIG_SYS_PCIE2_IO_PHYS,
 					CONFIG_SYS_PCIE2_IO_SIZE,
 					PCI_REGION_IO);
@@ -307,14 +307,14 @@ void pci_init_board(void)
 
 			/* outbound memory */
 			pci_set_region(r++,
-					CONFIG_SYS_PCIE1_MEM_BASE,
+					CONFIG_SYS_PCIE1_MEM_BUS,
 					CONFIG_SYS_PCIE1_MEM_PHYS,
 					CONFIG_SYS_PCIE1_MEM_SIZE,
 					PCI_REGION_MEM);
 
 			/* outbound io */
 			pci_set_region(r++,
-					CONFIG_SYS_PCIE1_IO_BASE,
+					CONFIG_SYS_PCIE1_IO_BUS,
 					CONFIG_SYS_PCIE1_IO_PHYS,
 					CONFIG_SYS_PCIE1_IO_SIZE,
 					PCI_REGION_IO);
@@ -358,7 +358,7 @@ int board_early_init_r(void)
 	/* invalidate existing TLB entry for flash + promjet */
 	disable_tlb(flash_esel);
 
-	set_tlb(1, flashbase, flashbase,		/* tlb, epn, rpn */
+	set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS,	/* tlb, epn, rpn */
 			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,	/* perms, wimge */
 			0, flash_esel, BOOKE_PAGESZ_256M, 1);	/* ts, esel, tsize, iprot */
 
diff --git a/board/freescale/mpc8572ds/tlb.c b/board/freescale/mpc8572ds/tlb.c
index 829896a..d832f89 100644
--- a/board/freescale/mpc8572ds/tlb.c
+++ b/board/freescale/mpc8572ds/tlb.c
@@ -54,26 +54,26 @@ struct fsl_e_tlb_entry tlb_table[] = {
 
 	/* W**G* - Flash/promjet, localbus */
 	/* This will be changed to *I*G* after relocation to RAM. */
-	SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE,
+	SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS,
 		      MAS3_SX|MAS3_SR, MAS2_W|MAS2_G,
 		      0, 2, BOOKE_PAGESZ_256M, 1),
 
 	/* *I*G* - PCI */
-	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_MEM_PHYS, CONFIG_SYS_PCIE3_MEM_PHYS,
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_MEM_VIRT, CONFIG_SYS_PCIE3_MEM_PHYS,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 3, BOOKE_PAGESZ_1G, 1),
 
 	/* *I*G* - PCI */
-	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_MEM_PHYS + 0x40000000, CONFIG_SYS_PCIE3_MEM_PHYS + 0x40000000,
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_MEM_VIRT + 0x40000000, CONFIG_SYS_PCIE3_MEM_PHYS + 0x40000000,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 4, BOOKE_PAGESZ_256M, 1),
 
-	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_MEM_PHYS + 0x50000000, CONFIG_SYS_PCIE3_MEM_PHYS + 0x50000000,
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_MEM_VIRT + 0x50000000, CONFIG_SYS_PCIE3_MEM_PHYS + 0x50000000,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 5, BOOKE_PAGESZ_256M, 1),
 
 	/* *I*G* - PCI I/O */
-	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_IO_PHYS, CONFIG_SYS_PCIE3_IO_PHYS,
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_IO_VIRT, CONFIG_SYS_PCIE3_IO_PHYS,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 6, BOOKE_PAGESZ_256K, 1),
 
@@ -82,7 +82,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 7, BOOKE_PAGESZ_1M, 1),
 
-	SET_TLB_ENTRY(1, PIXIS_BASE, PIXIS_BASE,
+	SET_TLB_ENTRY(1, PIXIS_BASE, PIXIS_BASE_PHYS,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 8, BOOKE_PAGESZ_4K, 1),
 };
diff --git a/board/freescale/mpc8610hpcd/ddr.c b/board/freescale/mpc8610hpcd/ddr.c
index 414ac24..0117d13 100644
--- a/board/freescale/mpc8610hpcd/ddr.c
+++ b/board/freescale/mpc8610hpcd/ddr.c
@@ -74,6 +74,9 @@ void fsl_ddr_board_options(memctl_options_t *popts,
 	 */
 	popts->write_data_delay = 3;
 
+	/* 2T timing enable */
+	popts->twoT_en = 1;
+
 	/*
 	 * Factors to consider for half-strength driver enable:
 	 *	- number of DIMMs installed
diff --git a/board/freescale/mpc8641hpcn/ddr.c b/board/freescale/mpc8641hpcn/ddr.c
index 3789b54..8dc249b 100644
--- a/board/freescale/mpc8641hpcn/ddr.c
+++ b/board/freescale/mpc8641hpcn/ddr.c
@@ -162,4 +162,6 @@ void fsl_ddr_board_options(memctl_options_t *popts,
 		}
 	}
 
+	/* 2T timing enable */
+	popts->twoT_en = 1;
 }
diff --git a/board/stxgp3/ddr.c b/board/stxgp3/ddr.c
index 7850794..93d1100 100644
--- a/board/stxgp3/ddr.c
+++ b/board/stxgp3/ddr.c
@@ -65,6 +65,9 @@ void fsl_ddr_board_options(memctl_options_t *popts,
 	 */
 	popts->write_data_delay = 3;
 
+	/* 2T timing enable */
+	popts->twoT_en = 1;
+
 	/*
 	 * Factors to consider for half-strength driver enable:
 	 *	- number of DIMMs installed
diff --git a/board/stxssa/ddr.c b/board/stxssa/ddr.c
index 7850794..93d1100 100644
--- a/board/stxssa/ddr.c
+++ b/board/stxssa/ddr.c
@@ -65,6 +65,9 @@ void fsl_ddr_board_options(memctl_options_t *popts,
 	 */
 	popts->write_data_delay = 3;
 
+	/* 2T timing enable */
+	popts->twoT_en = 1;
+
 	/*
 	 * Factors to consider for half-strength driver enable:
 	 *	- number of DIMMs installed
diff --git a/cpu/mpc85xx/cpu.c b/cpu/mpc85xx/cpu.c
index 15ba7f1..a34e251 100644
--- a/cpu/mpc85xx/cpu.c
+++ b/cpu/mpc85xx/cpu.c
@@ -90,6 +90,7 @@ int checkcpu (void)
 #else
 	u32 ddr_ratio = 0;
 #endif
+	int i;
 
 	svr = get_svr();
 	ver = SVR_SOC_VER(svr);
@@ -141,8 +142,10 @@ int checkcpu (void)
 
 	get_sys_info(&sysinfo);
 
-	puts("Clock Configuration:\n");
-	printf("       CPU:%-4s MHz, ", strmhz(buf1, sysinfo.freqProcessor));
+	puts("Clock Configuration:\n       ");
+	for (i = 0; i < CONFIG_NUM_CPUS; i++)
+		printf("CPU%d:%-4s MHz, ",
+				i,strmhz(buf1, sysinfo.freqProcessor[i]));
 	printf("CCB:%-4s MHz,\n", strmhz(buf1, sysinfo.freqSystemBus));
 
 	switch (ddr_ratio) {
diff --git a/cpu/mpc85xx/fdt.c b/cpu/mpc85xx/fdt.c
index 69fab99..1fae47c 100644
--- a/cpu/mpc85xx/fdt.c
+++ b/cpu/mpc85xx/fdt.c
@@ -213,6 +213,10 @@ void fdt_add_enet_stashing(void *fdt)
 
 void ft_cpu_setup(void *blob, bd_t *bd)
 {
+	int off;
+	int val;
+	sys_info_t sysinfo;
+
 	/* delete crypto node if not on an E-processor */
 	if (!IS_E_PROCESSOR(get_svr()))
 		fdt_fixup_crypto_node(blob, 0);
@@ -228,8 +232,15 @@ void ft_cpu_setup(void *blob, bd_t *bd)
 		"timebase-frequency", bd->bi_busfreq / 8, 1);
 	do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
 		"bus-frequency", bd->bi_busfreq, 1);
-	do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
-		"clock-frequency", bd->bi_intfreq, 1);
+	get_sys_info(&sysinfo);
+	off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4);
+	while (off != -FDT_ERR_NOTFOUND) {
+		u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", 0);
+		val = cpu_to_fdt32(sysinfo.freqProcessor[*reg]);
+		fdt_setprop(blob, off, "clock-frequency", &val, 4);
+		off = fdt_node_offset_by_prop_value(blob, off, "device_type",
+							"cpu", 4);
+	}
 	do_fixup_by_prop_u32(blob, "device_type", "soc", 4,
 		"bus-frequency", bd->bi_busfreq, 1);
 
diff --git a/cpu/mpc85xx/pci.c b/cpu/mpc85xx/pci.c
index 787c6eb..fedf1a5 100644
--- a/cpu/mpc85xx/pci.c
+++ b/cpu/mpc85xx/pci.c
@@ -31,6 +31,22 @@
 
 #if defined(CONFIG_PCI) && !defined(CONFIG_FSL_PCI_INIT)
 
+#ifndef CONFIG_SYS_PCI1_MEM_BUS
+#define CONFIG_SYS_PCI1_MEM_BUS CONFIG_SYS_PCI1_MEM_BASE
+#endif
+
+#ifndef CONFIG_SYS_PCI1_IO_BUS
+#define CONFIG_SYS_PCI1_IO_BUS CONFIG_SYS_PCI1_IO_BASE
+#endif
+
+#ifndef CONFIG_SYS_PCI2_MEM_BUS
+#define CONFIG_SYS_PCI2_MEM_BUS CONFIG_SYS_PCI2_MEM_BASE
+#endif
+
+#ifndef CONFIG_SYS_PCI2_IO_BUS
+#define CONFIG_SYS_PCI2_IO_BUS CONFIG_SYS_PCI2_IO_BASE
+#endif
+
 static struct pci_controller *pci_hose;
 
 void
@@ -80,14 +96,14 @@ pci_mpc85xx_init(struct pci_controller *board_hose)
 		pci_hose_write_config_word(hose, dev, PCIX_COMMAND, reg16);
 	}
 
-	pcix->potar1   = (CONFIG_SYS_PCI1_MEM_BASE >> 12) & 0x000fffff;
+	pcix->potar1   = (CONFIG_SYS_PCI1_MEM_BUS >> 12) & 0x000fffff;
 	pcix->potear1  = 0x00000000;
 	pcix->powbar1  = (CONFIG_SYS_PCI1_MEM_PHYS >> 12) & 0x000fffff;
 	pcix->powbear1 = 0x00000000;
 	pcix->powar1 = (POWAR_EN | POWAR_MEM_READ |
 			POWAR_MEM_WRITE | (__ilog2(CONFIG_SYS_PCI1_MEM_SIZE) - 1));
 
-	pcix->potar2  = (CONFIG_SYS_PCI1_IO_BASE >> 12) & 0x000fffff;
+	pcix->potar2  = (CONFIG_SYS_PCI1_IO_BUS >> 12) & 0x000fffff;
 	pcix->potear2  = 0x00000000;
 	pcix->powbar2  = (CONFIG_SYS_PCI1_IO_PHYS >> 12) & 0x000fffff;
 	pcix->powbear2 = 0x00000000;
@@ -105,13 +121,13 @@ pci_mpc85xx_init(struct pci_controller *board_hose)
 	pcix->piwar3 = 0;
 
 	pci_set_region(hose->regions + 0,
-		       CONFIG_SYS_PCI1_MEM_BASE,
+		       CONFIG_SYS_PCI1_MEM_BUS,
 		       CONFIG_SYS_PCI1_MEM_PHYS,
 		       CONFIG_SYS_PCI1_MEM_SIZE,
 		       PCI_REGION_MEM);
 
 	pci_set_region(hose->regions + 1,
-		       CONFIG_SYS_PCI1_IO_BASE,
+		       CONFIG_SYS_PCI1_IO_BUS,
 		       CONFIG_SYS_PCI1_IO_PHYS,
 		       CONFIG_SYS_PCI1_IO_SIZE,
 		       PCI_REGION_IO);
@@ -165,14 +181,14 @@ pci_mpc85xx_init(struct pci_controller *board_hose)
 	 */
 	pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff);
 
-	pcix2->potar1   = (CONFIG_SYS_PCI2_MEM_BASE >> 12) & 0x000fffff;
+	pcix2->potar1   = (CONFIG_SYS_PCI2_MEM_BUS >> 12) & 0x000fffff;
 	pcix2->potear1  = 0x00000000;
 	pcix2->powbar1  = (CONFIG_SYS_PCI2_MEM_PHYS >> 12) & 0x000fffff;
 	pcix2->powbear1 = 0x00000000;
 	pcix2->powar1 = (POWAR_EN | POWAR_MEM_READ |
 			POWAR_MEM_WRITE | (__ilog2(CONFIG_SYS_PCI2_MEM_SIZE) - 1));
 
-	pcix2->potar2  = (CONFIG_SYS_PCI2_IO_BASE >> 12) & 0x000fffff;
+	pcix2->potar2  = (CONFIG_SYS_PCI2_IO_BUS >> 12) & 0x000fffff;
 	pcix2->potear2  = 0x00000000;
 	pcix2->powbar2  = (CONFIG_SYS_PCI2_IO_PHYS >> 12) & 0x000fffff;
 	pcix2->powbear2 = 0x00000000;
@@ -190,13 +206,13 @@ pci_mpc85xx_init(struct pci_controller *board_hose)
 	pcix2->piwar3 = 0;
 
 	pci_set_region(hose->regions + 0,
-		       CONFIG_SYS_PCI2_MEM_BASE,
+		       CONFIG_SYS_PCI2_MEM_BUS,
 		       CONFIG_SYS_PCI2_MEM_PHYS,
 		       CONFIG_SYS_PCI2_MEM_SIZE,
 		       PCI_REGION_MEM);
 
 	pci_set_region(hose->regions + 1,
-		       CONFIG_SYS_PCI2_IO_BASE,
+		       CONFIG_SYS_PCI2_IO_BUS,
 		       CONFIG_SYS_PCI2_IO_PHYS,
 		       CONFIG_SYS_PCI2_IO_SIZE,
 		       PCI_REGION_IO);
diff --git a/cpu/mpc85xx/speed.c b/cpu/mpc85xx/speed.c
index 0d55228..b0f47e0 100644
--- a/cpu/mpc85xx/speed.c
+++ b/cpu/mpc85xx/speed.c
@@ -39,17 +39,19 @@ void get_sys_info (sys_info_t * sysInfo)
 	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 	uint plat_ratio,e500_ratio,half_freqSystemBus;
 	uint lcrr_div;
+	int i;
 
 	plat_ratio = (gur->porpllsr) & 0x0000003e;
 	plat_ratio >>= 1;
 	sysInfo->freqSystemBus = plat_ratio * CONFIG_SYS_CLK_FREQ;
-	e500_ratio = (gur->porpllsr) & 0x003f0000;
-	e500_ratio >>= 16;
 
 	/* Divide before multiply to avoid integer
 	 * overflow for processor speeds above 2GHz */
 	half_freqSystemBus = sysInfo->freqSystemBus/2;
-	sysInfo->freqProcessor = e500_ratio*half_freqSystemBus;
+	for (i = 0; i < CONFIG_NUM_CPUS; i++) {
+		e500_ratio = ((gur->porpllsr) >> (i * 8 + 16)) & 0x3f;
+		sysInfo->freqProcessor[i] = e500_ratio * half_freqSystemBus;
+	}
 
 	/* Note: freqDDRBus is the MCLK frequency, not the data rate. */
 	sysInfo->freqDDRBus = sysInfo->freqSystemBus;
@@ -105,7 +107,7 @@ int get_clocks (void)
 	dfbrg = (sccr & SCCR_DFBRG_MSK) >> SCCR_DFBRG_SHIFT;
 #endif
 	get_sys_info (&sys_info);
-	gd->cpu_clk = sys_info.freqProcessor;
+	gd->cpu_clk = sys_info.freqProcessor[0];
 	gd->bus_clk = sys_info.freqSystemBus;
 	gd->mem_clk = sys_info.freqDDRBus;
 	gd->lbc_clk = sys_info.freqLocalBus;
diff --git a/cpu/mpc8xxx/ddr/ctrl_regs.c b/cpu/mpc8xxx/ddr/ctrl_regs.c
index 1783e92..292980d 100644
--- a/cpu/mpc8xxx/ddr/ctrl_regs.c
+++ b/cpu/mpc8xxx/ddr/ctrl_regs.c
@@ -167,7 +167,7 @@ static void set_timing_cfg_0(fsl_ddr_cfg_regs_t *ddr)
 		| ((trrt_mclk & 0x3) << 26)	/* RRT */
 		| ((twwt_mclk & 0x3) << 24)	/* WWT */
 		| ((act_pd_exit_mclk & 0x7) << 20)  /* ACT_PD_EXIT */
-		| ((pre_pd_exit_mclk & 0x7) << 16)  /* PRE_PD_EXIT */
+		| ((pre_pd_exit_mclk & 0xF) << 16)  /* PRE_PD_EXIT */
 		| ((taxpd_mclk & 0xf) << 8)	/* ODT_PD_EXIT */
 		| ((tmrd_mclk & 0xf) << 0)	/* MRS_CYC */
 		);
@@ -185,10 +185,14 @@ static void set_timing_cfg_3(fsl_ddr_cfg_regs_t *ddr,
 	unsigned int ext_caslat = 0; /* Extended MCAS latency from READ cmd */
 	unsigned int cntl_adj = 0; /* Control Adjust */
 
+	/* If the tRAS > 19 MCLK, we use the ext mode */
+	if (picos_to_mclk(common_dimm->tRAS_ps) > 0x13)
+		ext_acttopre = 1;
+
 	ext_refrec = (picos_to_mclk(common_dimm->tRFC_ps) - 8) >> 4;
 	ddr->timing_cfg_3 = (0
 		| ((ext_acttopre & 0x1) << 24)
-		| ((ext_refrec & 0x7) << 16)
+		| ((ext_refrec & 0xF) << 16)
 		| ((ext_caslat & 0x1) << 12)
 		| ((cntl_adj & 0x7) << 0)
 		);
@@ -251,12 +255,12 @@ static void set_timing_cfg_1(fsl_ddr_cfg_regs_t *ddr,
 	wrtord_mclk = picos_to_mclk(common_dimm->tWTR_ps);
 
 	ddr->timing_cfg_1 = (0
-		| ((pretoact_mclk & 0x07) << 28)
+		| ((pretoact_mclk & 0x0F) << 28)
 		| ((acttopre_mclk & 0x0F) << 24)
-		| ((acttorw_mclk & 0x7) << 20)
+		| ((acttorw_mclk & 0xF) << 20)
 		| ((caslat_ctrl & 0xF) << 16)
 		| ((refrec_ctrl & 0xF) << 12)
-		| ((wrrec_mclk & 0x07) << 8)
+		| ((wrrec_mclk & 0x0F) << 8)
 		| ((acttoact_mclk & 0x07) << 4)
 		| ((wrtord_mclk & 0x07) << 0)
 		);
@@ -309,13 +313,13 @@ static void set_timing_cfg_2(fsl_ddr_cfg_regs_t *ddr,
 	four_act = picos_to_mclk(popts->tFAW_window_four_activates_ps);
 
 	ddr->timing_cfg_2 = (0
-		| ((add_lat_mclk & 0x7) << 28)
+		| ((add_lat_mclk & 0xf) << 28)
 		| ((cpo & 0x1f) << 23)
-		| ((wr_lat & 0x7) << 19)
+		| ((wr_lat & 0xf) << 19)
 		| ((rd_to_pre & 0x7) << 13)
 		| ((wr_data_delay & 0x7) << 10)
 		| ((cke_pls & 0x7) << 6)
-		| ((four_act & 0x1f) << 0)
+		| ((four_act & 0x3f) << 0)
 		);
 	debug("FSLDDR: timing_cfg_2 = 0x%08x\n", ddr->timing_cfg_2);
 }
@@ -332,7 +336,7 @@ static void set_ddr_sdram_cfg(fsl_ddr_cfg_regs_t *ddr,
 	unsigned int sdram_type;	/* Type of SDRAM */
 	unsigned int dyn_pwr;		/* Dynamic power management mode */
 	unsigned int dbw;		/* DRAM dta bus width */
-	unsigned int eight_be;		/* 8-beat burst enable */
+	unsigned int eight_be = 0;	/* 8-beat burst enable, DDR2 is zero */
 	unsigned int ncap = 0;		/* Non-concurrent auto-precharge */
 	unsigned int threeT_en;		/* Enable 3T timing */
 	unsigned int twoT_en;		/* Enable 2T timing */
@@ -359,7 +363,9 @@ static void set_ddr_sdram_cfg(fsl_ddr_cfg_regs_t *ddr,
 
 	dyn_pwr = popts->dynamic_power;
 	dbw = popts->data_bus_width;
-	eight_be = 0;		/* always 0 for DDR2 */
+	/* DDR3 must use 8-beat bursts when using 32-bit bus mode */
+	if ((sdram_type == SDRAM_TYPE_DDR3) && (dbw == 0x1))
+		eight_be = 1;
 	threeT_en = popts->threeT_en;
 	twoT_en = popts->twoT_en;
 	ba_intlv_ctl = popts->ba_intlv_ctl;
@@ -691,10 +697,10 @@ static void set_timing_cfg_5(fsl_ddr_cfg_regs_t *ddr)
 	unsigned int wodt_off = 0;	/* Write to ODT off */
 
 	ddr->timing_cfg_5 = (0
-			     | ((rodt_on & 0xf) << 24)
-			     | ((rodt_off & 0xf) << 20)
-			     | ((wodt_on & 0xf) << 12)
-			     | ((wodt_off & 0xf) << 8)
+			     | ((rodt_on & 0x1f) << 24)
+			     | ((rodt_off & 0x7) << 20)
+			     | ((wodt_on & 0x1f) << 12)
+			     | ((wodt_off & 0x7) << 8)
 			     );
 	debug("FSLDDR: timing_cfg_5 = 0x%08x\n", ddr->timing_cfg_5);
 }
@@ -744,15 +750,14 @@ static void set_ddr_wrlvl_cntl(fsl_ddr_cfg_regs_t *ddr)
 			       | ((wrlvl_dqsen & 0x7) << 16)
 			       | ((wrlvl_smpl & 0xf) << 12)
 			       | ((wrlvl_wlr & 0x7) << 8)
-			       | ((wrlvl_start & 0xF) << 0)
+			       | ((wrlvl_start & 0x1F) << 0)
 			       );
 }
 
 /* DDR Self Refresh Counter (DDR_SR_CNTR) */
-static void set_ddr_sr_cntr(fsl_ddr_cfg_regs_t *ddr)
+static void set_ddr_sr_cntr(fsl_ddr_cfg_regs_t *ddr, unsigned int sr_it)
 {
-	unsigned int sr_it = 0;	/* Self Refresh Idle Threshold */
-
+	/* Self Refresh Idle Threshold */
 	ddr->ddr_sr_cntr = (sr_it & 0xF) << 16;
 }
 
@@ -855,6 +860,7 @@ compute_fsl_memctl_config_regs(const memctl_options_t *popts,
 	unsigned int i;
 	unsigned int cas_latency;
 	unsigned int additive_latency;
+	unsigned int sr_it;
 
 	memset(ddr, 0, sizeof(fsl_ddr_cfg_regs_t));
 
@@ -876,6 +882,10 @@ compute_fsl_memctl_config_regs(const memctl_options_t *popts,
 		? popts->additive_latency_override_value
 		: common_dimm->additive_latency;
 
+	sr_it = (popts->auto_self_refresh_en)
+		? popts->sr_it
+		: 0;
+
 	/* Chip Select Memory Bounds (CSn_BNDS) */
 	for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
 		phys_size_t sa = 0;
@@ -1036,7 +1046,7 @@ compute_fsl_memctl_config_regs(const memctl_options_t *popts,
 	set_ddr_wrlvl_cntl(ddr);
 
 	set_ddr_pd_cntl(ddr);
-	set_ddr_sr_cntr(ddr);
+	set_ddr_sr_cntr(ddr, sr_it);
 
 	set_ddr_sdram_rcw_1(ddr);
 	set_ddr_sdram_rcw_2(ddr);
diff --git a/cpu/mpc8xxx/ddr/options.c b/cpu/mpc8xxx/ddr/options.c
index af7f73a..d4702d7 100644
--- a/cpu/mpc8xxx/ddr/options.c
+++ b/cpu/mpc8xxx/ddr/options.c
@@ -142,7 +142,7 @@ unsigned int populate_memctl_options(int all_DIMMs_registered,
 	 *	- number of components, number of active ranks
 	 *	- how much time you want to spend playing around
 	 */
-	popts->twoT_en = 1;
+	popts->twoT_en = 0;
 	popts->threeT_en = 0;
 
 	/*
diff --git a/doc/README.mpc8572ds b/doc/README.mpc8572ds
new file mode 100644
index 0000000..f9ffde4
--- /dev/null
+++ b/doc/README.mpc8572ds
@@ -0,0 +1,167 @@
+Overview
+--------
+MPC8572DS is a high-performance computing, evaluation and development platform
+supporting the mpc8572 PowerTM processor.
+
+Building U-boot
+-----------
+	make MPC8572DS_config
+	make
+
+Flash Banks
+-----------
+MPC8572DS board has two flash banks. They are both present on boot, but their
+locations can be swapped using the dip-switch SW9[1:2].
+
+Booting is always from the boot bank at 0xec00_0000.
+
+
+Memory Map
+----------
+
+0xe800_0000 - 0xebff_ffff	Alernate bank		64MB
+0xec00_0000 - 0xefff_ffff	Boot bank		64MB
+
+0xebf8_0000 - 0xebff_ffff	Alternate u-boot address	512KB
+0xeff8_0000 - 0xefff_ffff	Boot u-boot address		512KB
+
+
+Flashing Images
+---------------
+
+To place a new u-boot image in the alternate flash bank and then reset with that
+ new image temporarily, use this:
+
+	tftp 1000000 u-boot.bin
+	erase ebf80000 ebffffff
+	cp.b 1000000 ebf80000 80000
+	pixis_reset altbank
+
+
+To program the image in the boot flash bank:
+
+	tftp 1000000 u-boot.bin
+	protect off all
+	erase eff80000 ffffffff
+	cp.b 1000000 eff80000 80000
+
+
+The pixis_reset command
+-----------------------
+The command - "pixis_reset", is introduced to reset mpc8572ds board
+using the FPGA sequencer.  When the board restarts, it has the option
+of using either the current or alternate flash bank as the boot
+image, with or without the watchdog timer enabled, and finally with
+or without frequency changes.
+
+Usage is;
+
+	pixis_reset
+	pixis_reset altbank
+	pixis_reset altbank wd
+	pixis_reset altbank cf <SYSCLK freq> <COREPLL ratio> <MPXPLL ratio>
+	pixis_reset cf <SYSCLK freq> <COREPLL ratio> <MPXPLL ratio>
+
+Examples:
+
+	/* reset to current bank, like "reset" command */
+	pixis_reset
+
+	/* reset board but use the to alternate flash bank */
+	pixis_reset altbank
+
+
+Using the Device Tree Source File
+---------------------------------
+To create the DTB (Device Tree Binary) image file,
+use a command similar to this:
+
+	dtc -b 0 -f -I dts -O dtb mpc8572ds.dts > mpc8572ds.dtb
+
+Likely, that .dts file will come from here;
+
+	linux-2.6/arch/powerpc/boot/dts/mpc8572ds.dts
+
+
+Booting Linux
+-------------
+
+Place a linux uImage in the TFTP disk area.
+
+	tftp 1000000 uImage.8572
+	tftp c00000 mpc8572ds.dtb
+	bootm 1000000 - c00000
+
+
+Implementing AMP(Asymmetric MultiProcessing)
+-------------
+1. Build kernel image for core0:
+
+        a. $ make 85xx/mpc8572_ds_defconfig
+
+        b. $ make menuconfig
+           - un-select "Processor support"->"Symetric multi-processing support"
+
+        c. $ make uImage
+
+	d. $ cp arch/powerpc/boot/uImage /tftpboot/uImage.core0
+
+2. Build kernel image for core1:
+
+        a. $ make 85xx/mpc8572_ds_defconfig
+
+        b. $ make menuconfig
+           - Un-select "Processor support"->"Symetric multi-processing support"
+           - Select "Advanced setup" -> " Prompt for advanced kernel
+             configuration options"
+                - Select "Set physical address where the kernel is loaded" and
+                  set it to 0x20000000, asssuming core1 will start from 512MB.
+                - Select "Set custom page offset address"
+                - Select "Set custom kernel base address"
+                - Select "Set maximum low memory"
+           - "Exit" and save the selection.
+
+        c. $ make uImage
+
+	d. $ cp arch/powerpc/boot/uImage /tftpboot/uImage.core1
+
+3. Create dtb for core0:
+
+        $ dtc -I dts -O dtb -f -b 0 arch/powerpc/boot/dts/mpc8572ds_core0.dts > /tftpboot/mpc8572ds_core0.dtb
+
+4. Create dtb for core1:
+
+        $ dtc -I dts -O dtb -f -b 1 arch/powerpc/boot/dts/mpc8572ds_core1.dts > /tftpboot/mpc8572ds_core1.dtb
+
+5. Bring up two cores separately:
+
+        a. Power on the board, under u-boot prompt:
+                => setenv <serverip>
+                => setenv <ipaddr>
+                => setenv bootargs root=/dev/ram rw console=ttyS0,115200
+        b. Bring up core1's kernel first:
+                => setenv bootm_low 0x20000000
+                => setenv bootm_size 0x10000000
+                => tftp 21000000 8572/uImage.core1
+                => tftp 22000000 8572/ramdiskfile
+                => tftp 20c00000 8572/mpc8572ds_core1.dtb
+                => interrupts off
+                => bootm start 21000000 22000000 20c00000
+                => bootm loados
+                => bootm ramdisk
+                => bootm fdt
+                => fdt boardsetup
+                => fdt chosen $initrd_start $initrd_end
+                => bootm prep
+                => cpu 1 release $bootm_low - $fdtaddr -
+        c. Bring up core0's kernel(on the same u-boot console):
+                => setenv bootm_low 0
+                => setenv bootm_size 0x20000000
+                => tftp 1000000 8572/uImage.core0
+                => tftp 2000000 8572/ramdiskfile
+                => tftp c00000 8572/mpc8572ds_core0.dtb
+                => bootm 1000000 2000000 c00000
+
+Please note only core0 will run u-boot, core1 starts kernel directly after
+"cpu release" command is issued.
+
diff --git a/include/asm-ppc/fsl_ddr_sdram.h b/include/asm-ppc/fsl_ddr_sdram.h
index c1ea7cd..b213af3 100644
--- a/include/asm-ppc/fsl_ddr_sdram.h
+++ b/include/asm-ppc/fsl_ddr_sdram.h
@@ -34,7 +34,10 @@ typedef ddr2_spd_eeprom_t generic_spd_eeprom_t;
 #elif defined(CONFIG_FSL_DDR3)
 #define FSL_DDR_MIN_TCKE_PULSE_WIDTH_DDR	(3)	/* FIXME */
 typedef ddr3_spd_eeprom_t generic_spd_eeprom_t;
+#ifndef CONFIG_FSL_SDRAM_TYPE
+#define CONFIG_FSL_SDRAM_TYPE	SDRAM_TYPE_DDR3
 #endif
+#endif	/* #if defined(CONFIG_FSL_DDR1) */
 
 /* define bank(chip select) interleaving mode */
 #define FSL_DDR_CS0_CS1			0x40
@@ -143,6 +146,10 @@ typedef struct memctl_options_s {
 	unsigned int bstopre;
 	unsigned int tCKE_clock_pulse_width_ps;	/* tCKE */
 	unsigned int tFAW_window_four_activates_ps;	/* tFAW --  FOUR_ACT */
+
+	/* Automatic self refresh */
+	unsigned int auto_self_refresh_en;
+	unsigned int sr_it;
 } memctl_options_t;
 
 extern phys_size_t fsl_ddr_sdram(void);
diff --git a/include/asm-ppc/fsl_lbc.h b/include/asm-ppc/fsl_lbc.h
index e492c62..9fa0b65 100644
--- a/include/asm-ppc/fsl_lbc.h
+++ b/include/asm-ppc/fsl_lbc.h
@@ -28,6 +28,8 @@
 
 #define BR_BA				0xFFFF8000
 #define BR_BA_SHIFT			15
+#define BR_XBA				0x00006000
+#define BR_XBA_SHIFT			13
 #define BR_PS				0x00001800
 #define BR_PS_SHIFT			11
 #define BR_PS_8				0x00000800	/* Port Size 8 bit */
@@ -70,7 +72,7 @@
 #endif
 
 /* Convert an address into the right format for the BR registers */
-#ifdef CONFIG_PHYS_64BIT
+#if defined(CONFIG_PHYS_64BIT) && !defined(CONFIG_FSL_ELBC)
 #define BR_PHYS_ADDR(x)	((unsigned long)((x & 0x0ffff8000ULL) | \
 					 ((x & 0x300000000ULL) >> 19)))
 #else
@@ -90,6 +92,8 @@
 
 #define OR_GPCM_AM			0xFFFF8000
 #define OR_GPCM_AM_SHIFT		15
+#define OR_GPCM_XAM			0x00006000
+#define OR_GPCM_XAM_SHIFT		13
 #define OR_GPCM_BCTLD			0x00001000
 #define OR_GPCM_BCTLD_SHIFT		12
 #define OR_GPCM_CSNT			0x00000800
@@ -132,6 +136,8 @@
 
 #define OR_FCM_AM			0xFFFF8000
 #define OR_FCM_AM_SHIFT				15
+#define OR_FCM_XAM			0x00006000
+#define OR_FCM_XAM_SHIFT		13
 #define OR_FCM_BCTLD			0x00001000
 #define OR_FCM_BCTLD_SHIFT			12
 #define OR_FCM_PGS			0x00000400
diff --git a/include/configs/MPC8536DS.h b/include/configs/MPC8536DS.h
index 505c48b..e379d532 100644
--- a/include/configs/MPC8536DS.h
+++ b/include/configs/MPC8536DS.h
@@ -34,6 +34,7 @@
 #define CONFIG_MPC8536		1
 #define CONFIG_MPC8536DS	1
 
+#define CONFIG_FSL_ELBC		1	/* Has Enhanced localbus controller */
 #define CONFIG_PCI		1	/* Enable PCI/PCIE */
 #define CONFIG_PCI1		1	/* Enable PCI controller 1 */
 #define CONFIG_PCIE1		1	/* PCIE controler 1 (slot 1) */
@@ -166,12 +167,13 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
  * Local Bus Definitions
  */
 #define CONFIG_SYS_FLASH_BASE		0xe0000000	/* start of FLASH 128M */
+#define CONFIG_SYS_FLASH_BASE_PHYS	CONFIG_SYS_FLASH_BASE
 
-#define CONFIG_SYS_BR0_PRELIM		0xe8001001
-#define CONFIG_SYS_OR0_PRELIM		0xf8000ff7
+#define CONFIG_SYS_BR0_PRELIM  (BR_PHYS_ADDR((CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000)) | BR_PS_16 | BR_V)
+#define CONFIG_SYS_OR0_PRELIM	0xf8000ff7
 
-#define CONFIG_SYS_BR1_PRELIM		0xe0001001
-#define CONFIG_SYS_OR1_PRELIM		0xf8000ff7
+#define CONFIG_SYS_BR1_PRELIM  (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | BR_PS_16 | BR_V)
+#define CONFIG_SYS_OR1_PRELIM	0xf8000ff7
 
 #define CONFIG_SYS_FLASH_BANKS_LIST	{CONFIG_SYS_FLASH_BASE + 0x8000000, CONFIG_SYS_FLASH_BASE}
 #define CONFIG_SYS_FLASH_QUIET_TEST
@@ -194,8 +196,9 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 
 #define CONFIG_FSL_PIXIS	1	/* use common PIXIS code */
 #define PIXIS_BASE	0xffdf0000	/* PIXIS registers */
+#define PIXIS_BASE_PHYS	PIXIS_BASE
 
-#define CONFIG_SYS_BR3_PRELIM	(PIXIS_BASE | 0x0801)	/* port size 8bit */
+#define CONFIG_SYS_BR3_PRELIM	(BR_PHYS_ADDR(PIXIS_BASE_PHYS) | BR_PS_8 | BR_V)
 #define CONFIG_SYS_OR3_PRELIM		0xffffeff7	/* 32KB but only 4k mapped */
 
 #define PIXIS_ID		0x0	/* Board ID at offset 0 */
@@ -254,7 +257,7 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 #define CONFIG_SYS_NAND_BLOCK_SIZE	(128 * 1024)
 
 /* NAND flash config */
-#define CONFIG_NAND_BR_PRELIM	(CONFIG_SYS_NAND_BASE_PHYS \
+#define CONFIG_NAND_BR_PRELIM  (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 				| (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
 				| BR_PS_8              /* Port Size = 8 bit */ \
 				| BR_MS_FCM             /* MSEL = FCM */ \
@@ -271,20 +274,20 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 #define CONFIG_SYS_BR2_PRELIM  CONFIG_NAND_BR_PRELIM  /* NAND Base Address */
 #define CONFIG_SYS_OR2_PRELIM  CONFIG_NAND_OR_PRELIM  /* NAND Options */
 
-#define CONFIG_SYS_BR4_PRELIM  ((CONFIG_SYS_NAND_BASE_PHYS + 0x40000)\
+#define CONFIG_SYS_BR4_PRELIM  (BR_PHYS_ADDR((CONFIG_SYS_NAND_BASE_PHYS + 0x40000))\
 				| (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
 				| BR_PS_8              /* Port Size = 8 bit */ \
 				| BR_MS_FCM             /* MSEL = FCM */ \
 				| BR_V)                 /* valid */
 #define CONFIG_SYS_OR4_PRELIM	CONFIG_NAND_OR_PRELIM     /* NAND Options */
-#define CONFIG_SYS_BR5_PRELIM  ((CONFIG_SYS_NAND_BASE_PHYS + 0x80000)\
+#define CONFIG_SYS_BR5_PRELIM  (BR_PHYS_ADDR((CONFIG_SYS_NAND_BASE_PHYS + 0x80000))\
 				| (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
 				| BR_PS_8              /* Port Size = 8 bit */ \
 				| BR_MS_FCM             /* MSEL = FCM */ \
 				| BR_V)                 /* valid */
 #define CONFIG_SYS_OR5_PRELIM	CONFIG_NAND_OR_PRELIM     /* NAND Options */
 
-#define CONFIG_SYS_BR6_PRELIM  ((CONFIG_SYS_NAND_BASE_PHYS + 0xC0000)\
+#define CONFIG_SYS_BR6_PRELIM  (BR_PHYS_ADDR((CONFIG_SYS_NAND_BASE_PHYS + 0xc0000))\
 				| (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
 				| BR_PS_8              /* Port Size = 8 bit */ \
 				| BR_MS_FCM             /* MSEL = FCM */ \
@@ -355,34 +358,42 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
  * Memory space is mapped 1-1, but I/O space must start from 0.
  */
 
-#define CONFIG_SYS_PCI1_MEM_BASE	0x80000000
-#define CONFIG_SYS_PCI1_MEM_PHYS	CONFIG_SYS_PCI1_MEM_BASE
+#define CONFIG_SYS_PCI1_MEM_VIRT	0x80000000
+#define CONFIG_SYS_PCI1_MEM_BUS		0x80000000
+#define CONFIG_SYS_PCI1_MEM_PHYS	0x80000000
 #define CONFIG_SYS_PCI1_MEM_SIZE	0x10000000	/* 256M */
-#define CONFIG_SYS_PCI1_IO_BASE	0x00000000
+#define CONFIG_SYS_PCI1_IO_VIRT	0xffc00000
+#define CONFIG_SYS_PCI1_IO_BUS	0x00000000
 #define CONFIG_SYS_PCI1_IO_PHYS	0xffc00000
 #define CONFIG_SYS_PCI1_IO_SIZE	0x00010000	/* 64k */
 
 /* controller 1, Slot 1, tgtid 1, Base address a000 */
-#define CONFIG_SYS_PCIE1_MEM_BASE	0x90000000
-#define CONFIG_SYS_PCIE1_MEM_PHYS	CONFIG_SYS_PCIE1_MEM_BASE
+#define CONFIG_SYS_PCIE1_MEM_VIRT	0x90000000
+#define CONFIG_SYS_PCIE1_MEM_BUS	0x90000000
+#define CONFIG_SYS_PCIE1_MEM_PHYS	0x90000000
 #define CONFIG_SYS_PCIE1_MEM_SIZE	0x08000000	/* 128M */
-#define CONFIG_SYS_PCIE1_IO_BASE	0x00000000
+#define CONFIG_SYS_PCIE1_IO_VIRT	0xffc10000
+#define CONFIG_SYS_PCIE1_IO_BUS	0x00000000
 #define CONFIG_SYS_PCIE1_IO_PHYS	0xffc10000
 #define CONFIG_SYS_PCIE1_IO_SIZE	0x00010000	/* 64k */
 
 /* controller 2, Slot 2, tgtid 2, Base address 9000 */
-#define CONFIG_SYS_PCIE2_MEM_BASE	0x98000000
-#define CONFIG_SYS_PCIE2_MEM_PHYS	CONFIG_SYS_PCIE2_MEM_BASE
+#define CONFIG_SYS_PCIE2_MEM_VIRT	0x98000000
+#define CONFIG_SYS_PCIE2_MEM_BUS	0x98000000
+#define CONFIG_SYS_PCIE2_MEM_PHYS	0x98000000
 #define CONFIG_SYS_PCIE2_MEM_SIZE	0x08000000	/* 128M */
-#define CONFIG_SYS_PCIE2_IO_BASE	0x00000000
+#define CONFIG_SYS_PCIE2_IO_VIRT	0xffc20000
+#define CONFIG_SYS_PCIE2_IO_BUS	0x00000000
 #define CONFIG_SYS_PCIE2_IO_PHYS	0xffc20000
 #define CONFIG_SYS_PCIE2_IO_SIZE	0x00010000	/* 64k */
 
 /* controller 3, direct to uli, tgtid 3, Base address 8000 */
-#define CONFIG_SYS_PCIE3_MEM_BASE	0xa0000000
-#define CONFIG_SYS_PCIE3_MEM_PHYS	CONFIG_SYS_PCIE3_MEM_BASE
+#define CONFIG_SYS_PCIE3_MEM_VIRT	0xa0000000
+#define CONFIG_SYS_PCIE3_MEM_BUS	0xa0000000
+#define CONFIG_SYS_PCIE3_MEM_PHYS	0xa0000000
 #define CONFIG_SYS_PCIE3_MEM_SIZE	0x20000000	/* 512M */
-#define CONFIG_SYS_PCIE3_IO_BASE	0x00000000
+#define CONFIG_SYS_PCIE3_IO_VIRT	0xffc30000
+#define CONFIG_SYS_PCIE3_IO_BUS	0x00000000
 #define CONFIG_SYS_PCIE3_IO_PHYS	0xffc30000
 #define CONFIG_SYS_PCIE3_IO_SIZE	0x00010000	/* 64k */
 
@@ -392,10 +403,10 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 #define CONFIG_PCI_PNP			/* do pci plug-and-play */
 
 /*PCIE video card used*/
-#define VIDEO_IO_OFFSET		CONFIG_SYS_PCIE3_IO_PHYS
+#define VIDEO_IO_OFFSET		CONFIG_SYS_PCIE3_IO_VIRT
 
 /*PCI video card used*/
-/*#define VIDEO_IO_OFFSET	CONFIG_SYS_PCI1_IO_PHYS*/
+/*#define VIDEO_IO_OFFSET	CONFIG_SYS_PCI1_IO_VIRT*/
 
 /* video */
 #define CONFIG_VIDEO
@@ -408,7 +419,7 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 #define CONFIG_ATI_RADEON_FB
 #define CONFIG_VIDEO_LOGO
 /*#define CONFIG_CONSOLE_CURSOR*/
-#define CONFIG_SYS_ISA_IO_BASE_ADDRESS CONFIG_SYS_PCIE3_IO_PHYS
+#define CONFIG_SYS_ISA_IO_BASE_ADDRESS CONFIG_SYS_PCIE3_IO_VIRT
 #endif
 
 #undef CONFIG_EEPRO100
@@ -422,8 +433,8 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 #endif
 
 #ifndef CONFIG_PCI_PNP
-	#define PCI_ENET0_IOADDR	CONFIG_SYS_PCI1_IO_BASE
-	#define PCI_ENET0_MEMADDR	CONFIG_SYS_PCI1_IO_BASE
+	#define PCI_ENET0_IOADDR	CONFIG_SYS_PCI1_IO_BUS
+	#define PCI_ENET0_MEMADDR	CONFIG_SYS_PCI1_IO_BUS
 	#define PCI_IDSEL_NUMBER	0x11	/* IDSEL = AD11 */
 #endif
 
diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h
index f22b752..0d03b0b 100644
--- a/include/configs/MPC8540ADS.h
+++ b/include/configs/MPC8540ADS.h
@@ -308,18 +308,21 @@
 #define CONFIG_SYS_I2C_OFFSET		0x3000
 
 /* RapidIO MMU */
-#define CONFIG_SYS_RIO_MEM_BASE	0xc0000000	/* base address */
-#define CONFIG_SYS_RIO_MEM_PHYS	CONFIG_SYS_RIO_MEM_BASE
+#define CONFIG_SYS_RIO_MEM_VIRT	0xc0000000	/* base address */
+#define CONFIG_SYS_RIO_MEM_BUS	0xc0000000	/* base address */
+#define CONFIG_SYS_RIO_MEM_PHYS	0xc0000000
 #define CONFIG_SYS_RIO_MEM_SIZE	0x20000000	/* 128M */
 
 /*
  * General PCI
  * Memory space is mapped 1-1, but I/O space must start from 0.
  */
-#define CONFIG_SYS_PCI1_MEM_BASE	0x80000000
-#define CONFIG_SYS_PCI1_MEM_PHYS	CONFIG_SYS_PCI1_MEM_BASE
+#define CONFIG_SYS_PCI1_MEM_VIRT	0x80000000
+#define CONFIG_SYS_PCI1_MEM_BUS	0x80000000
+#define CONFIG_SYS_PCI1_MEM_PHYS	0x80000000
 #define CONFIG_SYS_PCI1_MEM_SIZE	0x20000000	/* 512M */
-#define CONFIG_SYS_PCI1_IO_BASE	0x00000000
+#define CONFIG_SYS_PCI1_IO_VIRT	0xe2000000
+#define CONFIG_SYS_PCI1_IO_BUS	0x00000000
 #define CONFIG_SYS_PCI1_IO_PHYS	0xe2000000
 #define CONFIG_SYS_PCI1_IO_SIZE	0x100000	/* 1M */
 
diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h
index 399189c..fa82fbc 100644
--- a/include/configs/MPC8541CDS.h
+++ b/include/configs/MPC8541CDS.h
@@ -341,17 +341,21 @@ extern unsigned long get_clock_freq(void);
  * General PCI
  * Memory space is mapped 1-1, but I/O space must start from 0.
  */
-#define CONFIG_SYS_PCI1_MEM_BASE	0x80000000
-#define CONFIG_SYS_PCI1_MEM_PHYS	CONFIG_SYS_PCI1_MEM_BASE
+#define CONFIG_SYS_PCI1_MEM_VIRT	0x80000000
+#define CONFIG_SYS_PCI1_MEM_BUS	0x80000000
+#define CONFIG_SYS_PCI1_MEM_PHYS	0x80000000
 #define CONFIG_SYS_PCI1_MEM_SIZE	0x20000000	/* 512M */
-#define CONFIG_SYS_PCI1_IO_BASE	0x00000000
+#define CONFIG_SYS_PCI1_IO_VIRT	0xe2000000
+#define CONFIG_SYS_PCI1_IO_BUS	0x00000000
 #define CONFIG_SYS_PCI1_IO_PHYS	0xe2000000
 #define CONFIG_SYS_PCI1_IO_SIZE	0x100000	/* 1M */
 
-#define CONFIG_SYS_PCI2_MEM_BASE	0xa0000000
-#define CONFIG_SYS_PCI2_MEM_PHYS	CONFIG_SYS_PCI2_MEM_BASE
+#define CONFIG_SYS_PCI2_MEM_VIRT	0xa0000000
+#define CONFIG_SYS_PCI2_MEM_BUS	0xa0000000
+#define CONFIG_SYS_PCI2_MEM_PHYS	0xa0000000
 #define CONFIG_SYS_PCI2_MEM_SIZE	0x20000000	/* 512M */
-#define CONFIG_SYS_PCI2_IO_BASE	0x00000000
+#define CONFIG_SYS_PCI2_IO_VIRT	0xe2100000
+#define CONFIG_SYS_PCI2_IO_BUS	0x00000000
 #define CONFIG_SYS_PCI2_IO_PHYS	0xe2100000
 #define CONFIG_SYS_PCI2_IO_SIZE	0x100000	/* 1M */
 
diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h
index 9b1b34c..59cfde6 100644
--- a/include/configs/MPC8544DS.h
+++ b/include/configs/MPC8544DS.h
@@ -263,50 +263,61 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
  * General PCI
  * Memory space is mapped 1-1, but I/O space must start from 0.
  */
+#define CONFIG_SYS_PCIE_VIRT		0x80000000	/* 1G PCIE TLB */
 #define CONFIG_SYS_PCIE_PHYS		0x80000000	/* 1G PCIE TLB */
+#define CONFIG_SYS_PCI_VIRT		0xc0000000	/* 512M PCI TLB */
 #define CONFIG_SYS_PCI_PHYS		0xc0000000	/* 512M PCI TLB */
 
-#define CONFIG_SYS_PCI1_MEM_BASE	0xc0000000
-#define CONFIG_SYS_PCI1_MEM_PHYS	CONFIG_SYS_PCI1_MEM_BASE
+#define CONFIG_SYS_PCI1_MEM_VIRT	0xc0000000
+#define CONFIG_SYS_PCI1_MEM_BUS	0xc0000000
+#define CONFIG_SYS_PCI1_MEM_PHYS	0xc0000000
 #define CONFIG_SYS_PCI1_MEM_SIZE	0x20000000	/* 512M */
-#define CONFIG_SYS_PCI1_IO_BASE	0x00000000
+#define CONFIG_SYS_PCI1_IO_VIRT	0xe1000000
+#define CONFIG_SYS_PCI1_IO_BUS	0x00000000
 #define CONFIG_SYS_PCI1_IO_PHYS	0xe1000000
 #define CONFIG_SYS_PCI1_IO_SIZE	0x00010000	/* 64k */
 
 /* controller 2, Slot 1, tgtid 1, Base address 9000 */
-#define CONFIG_SYS_PCIE2_MEM_BASE	0x80000000
-#define CONFIG_SYS_PCIE2_MEM_PHYS	CONFIG_SYS_PCIE2_MEM_BASE
+#define CONFIG_SYS_PCIE2_MEM_VIRT	0x80000000
+#define CONFIG_SYS_PCIE2_MEM_BUS	0x80000000
+#define CONFIG_SYS_PCIE2_MEM_PHYS	0x80000000
 #define CONFIG_SYS_PCIE2_MEM_SIZE	0x20000000	/* 512M */
-#define CONFIG_SYS_PCIE2_IO_BASE	0x00000000
+#define CONFIG_SYS_PCIE2_IO_VIRT	0xe1010000
+#define CONFIG_SYS_PCIE2_IO_BUS	0x00000000
 #define CONFIG_SYS_PCIE2_IO_PHYS	0xe1010000
 #define CONFIG_SYS_PCIE2_IO_SIZE	0x00010000	/* 64k */
 
 /* controller 1, Slot 2,tgtid 2, Base address a000 */
-#define CONFIG_SYS_PCIE1_MEM_BASE	0xa0000000
-#define CONFIG_SYS_PCIE1_MEM_PHYS	CONFIG_SYS_PCIE1_MEM_BASE
+#define CONFIG_SYS_PCIE1_MEM_VIRT	0xa0000000
+#define CONFIG_SYS_PCIE1_MEM_BUS	0xa0000000
+#define CONFIG_SYS_PCIE1_MEM_PHYS	0xa0000000
 #define CONFIG_SYS_PCIE1_MEM_SIZE	0x10000000	/* 256M */
-#define CONFIG_SYS_PCIE1_IO_BASE	0x00000000
+#define CONFIG_SYS_PCIE1_IO_VIRT	0xe1020000
+#define CONFIG_SYS_PCIE1_IO_BUS	0x00000000
 #define CONFIG_SYS_PCIE1_IO_PHYS	0xe1020000
 #define CONFIG_SYS_PCIE1_IO_SIZE	0x00010000	/* 64k */
 
 /* controller 3, direct to uli, tgtid 3, Base address b000 */
-#define CONFIG_SYS_PCIE3_MEM_BASE	0xb0000000
-#define CONFIG_SYS_PCIE3_MEM_PHYS	CONFIG_SYS_PCIE3_MEM_BASE
+#define CONFIG_SYS_PCIE3_MEM_VIRT	0xb0000000
+#define CONFIG_SYS_PCIE3_MEM_BUS	0xb0000000
+#define CONFIG_SYS_PCIE3_MEM_PHYS	0xb0000000
 #define CONFIG_SYS_PCIE3_MEM_SIZE	0x00100000	/* 1M */
-#define CONFIG_SYS_PCIE3_IO_BASE	0x00000000
+#define CONFIG_SYS_PCIE3_IO_VIRT	0xb0100000	/* reuse mem LAW */
+#define CONFIG_SYS_PCIE3_IO_BUS	0x00000000
 #define CONFIG_SYS_PCIE3_IO_PHYS	0xb0100000	/* reuse mem LAW */
 #define CONFIG_SYS_PCIE3_IO_SIZE	0x00100000	/* 1M */
-#define CONFIG_SYS_PCIE3_MEM_BASE2	0xb0200000
-#define CONFIG_SYS_PCIE3_MEM_PHYS2	CONFIG_SYS_PCIE3_MEM_BASE2
+#define CONFIG_SYS_PCIE3_MEM_VIRT2	0xb0200000
+#define CONFIG_SYS_PCIE3_MEM_BUS2	0xb0200000
+#define CONFIG_SYS_PCIE3_MEM_PHYS2	0xb0200000
 #define CONFIG_SYS_PCIE3_MEM_SIZE2	0x00200000	/* 1M */
 
 #if defined(CONFIG_PCI)
 
 /*PCIE video card used*/
-#define VIDEO_IO_OFFSET		CONFIG_SYS_PCIE2_IO_PHYS
+#define VIDEO_IO_OFFSET		CONFIG_SYS_PCIE2_IO_VIRT
 
 /*PCI video card used*/
-/*#define VIDEO_IO_OFFSET	CONFIG_SYS_PCI1_IO_PHYS*/
+/*#define VIDEO_IO_OFFSET	CONFIG_SYS_PCI1_IO_VIRT*/
 
 /* video */
 #define CONFIG_VIDEO
@@ -336,8 +347,8 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #endif
 
 #ifndef CONFIG_PCI_PNP
-	#define PCI_ENET0_IOADDR	CONFIG_SYS_PCI1_IO_BASE
-	#define PCI_ENET0_MEMADDR	CONFIG_SYS_PCI1_IO_BASE
+	#define PCI_ENET0_IOADDR	CONFIG_SYS_PCI1_IO_BUS
+	#define PCI_ENET0_MEMADDR	CONFIG_SYS_PCI1_IO_BUS
 	#define PCI_IDSEL_NUMBER	0x11	/* IDSEL = AD11 */
 #endif
 
diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h
index e1bd45e..95bce95 100644
--- a/include/configs/MPC8548CDS.h
+++ b/include/configs/MPC8548CDS.h
@@ -365,29 +365,36 @@ extern unsigned long get_clock_freq(void);
  * General PCI
  * Memory space is mapped 1-1, but I/O space must start from 0.
  */
+#define CONFIG_SYS_PCI_VIRT		0x80000000	/* 1G PCI TLB */
 #define CONFIG_SYS_PCI_PHYS		0x80000000	/* 1G PCI TLB */
 
-#define CONFIG_SYS_PCI1_MEM_BASE	0x80000000
-#define CONFIG_SYS_PCI1_MEM_PHYS	CONFIG_SYS_PCI1_MEM_BASE
+#define CONFIG_SYS_PCI1_MEM_VIRT	0x80000000
+#define CONFIG_SYS_PCI1_MEM_BUS	0x80000000
+#define CONFIG_SYS_PCI1_MEM_PHYS	0x80000000
 #define CONFIG_SYS_PCI1_MEM_SIZE	0x20000000	/* 512M */
-#define CONFIG_SYS_PCI1_IO_BASE	0x00000000
+#define CONFIG_SYS_PCI1_IO_VIRT	0xe2000000
+#define CONFIG_SYS_PCI1_IO_BUS	0x00000000
 #define CONFIG_SYS_PCI1_IO_PHYS	0xe2000000
 #define CONFIG_SYS_PCI1_IO_SIZE	0x00100000	/* 1M */
 
 #ifdef CONFIG_PCI2
-#define CONFIG_SYS_PCI2_MEM_BASE	0xa0000000
-#define CONFIG_SYS_PCI2_MEM_PHYS	CONFIG_SYS_PCI2_MEM_BASE
+#define CONFIG_SYS_PCI2_MEM_VIRT	0xa0000000
+#define CONFIG_SYS_PCI2_MEM_BUS	0xa0000000
+#define CONFIG_SYS_PCI2_MEM_PHYS	0xa0000000
 #define CONFIG_SYS_PCI2_MEM_SIZE	0x20000000	/* 512M */
-#define CONFIG_SYS_PCI2_IO_BASE	0x00000000
+#define CONFIG_SYS_PCI2_IO_VIRT	0xe2800000
+#define CONFIG_SYS_PCI2_IO_BUS	0x00000000
 #define CONFIG_SYS_PCI2_IO_PHYS	0xe2800000
 #define CONFIG_SYS_PCI2_IO_SIZE	0x00100000	/* 1M */
 #endif
 
 #ifdef CONFIG_PCIE1
-#define CONFIG_SYS_PCIE1_MEM_BASE	0xa0000000
-#define CONFIG_SYS_PCIE1_MEM_PHYS	CONFIG_SYS_PCIE1_MEM_BASE
+#define CONFIG_SYS_PCIE1_MEM_VIRT	0xa0000000
+#define CONFIG_SYS_PCIE1_MEM_BUS	0xa0000000
+#define CONFIG_SYS_PCIE1_MEM_PHYS	0xa0000000
 #define CONFIG_SYS_PCIE1_MEM_SIZE	0x20000000	/* 512M */
-#define CONFIG_SYS_PCIE1_IO_BASE	0x00000000
+#define CONFIG_SYS_PCIE1_IO_VIRT	0xe3000000
+#define CONFIG_SYS_PCIE1_IO_BUS	0x00000000
 #define CONFIG_SYS_PCIE1_IO_PHYS	0xe3000000
 #define CONFIG_SYS_PCIE1_IO_SIZE	0x00100000	/*   1M */
 #endif
@@ -396,7 +403,8 @@ extern unsigned long get_clock_freq(void);
 /*
  * RapidIO MMU
  */
-#define CONFIG_SYS_RIO_MEM_BASE	0xC0000000
+#define CONFIG_SYS_RIO_MEM_VIRT	0xC0000000
+#define CONFIG_SYS_RIO_MEM_BUS	0xC0000000
 #define CONFIG_SYS_RIO_MEM_SIZE	0x20000000	/* 512M */
 #endif
 
diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h
index c92f82d..6bf0961 100644
--- a/include/configs/MPC8555CDS.h
+++ b/include/configs/MPC8555CDS.h
@@ -339,17 +339,21 @@ extern unsigned long get_clock_freq(void);
  * General PCI
  * Addresses are mapped 1-1.
  */
-#define CONFIG_SYS_PCI1_MEM_BASE	0x80000000
-#define CONFIG_SYS_PCI1_MEM_PHYS	CONFIG_SYS_PCI1_MEM_BASE
+#define CONFIG_SYS_PCI1_MEM_VIRT	0x80000000
+#define CONFIG_SYS_PCI1_MEM_BUS	0x80000000
+#define CONFIG_SYS_PCI1_MEM_PHYS	0x80000000
 #define CONFIG_SYS_PCI1_MEM_SIZE	0x20000000	/* 512M */
-#define CONFIG_SYS_PCI1_IO_BASE	0x00000000
+#define CONFIG_SYS_PCI1_IO_VIRT	0xe2000000
+#define CONFIG_SYS_PCI1_IO_BUS	0x00000000
 #define CONFIG_SYS_PCI1_IO_PHYS	0xe2000000
 #define CONFIG_SYS_PCI1_IO_SIZE	0x00100000	/* 1M */
 
-#define CONFIG_SYS_PCI2_MEM_BASE	0xa0000000
-#define CONFIG_SYS_PCI2_MEM_PHYS	CONFIG_SYS_PCI2_MEM_BASE
+#define CONFIG_SYS_PCI2_MEM_VIRT	0xa0000000
+#define CONFIG_SYS_PCI2_MEM_BUS	0xa0000000
+#define CONFIG_SYS_PCI2_MEM_PHYS	0xa0000000
 #define CONFIG_SYS_PCI2_MEM_SIZE	0x20000000	/* 512M */
-#define CONFIG_SYS_PCI2_IO_BASE	0x00000000
+#define CONFIG_SYS_PCI2_IO_VIRT	0xe2100000
+#define CONFIG_SYS_PCI2_IO_BUS	0x00000000
 #define CONFIG_SYS_PCI2_IO_PHYS	0xe2100000
 #define CONFIG_SYS_PCI2_IO_SIZE	0x00100000	/* 1M */
 
diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h
index bf4bd2c..3f78a6e 100644
--- a/include/configs/MPC8560ADS.h
+++ b/include/configs/MPC8560ADS.h
@@ -300,18 +300,21 @@
 #define CONFIG_SYS_I2C_OFFSET		0x3000
 
 /* RapidIO MMU */
-#define CONFIG_SYS_RIO_MEM_BASE	0xc0000000	/* base address */
-#define CONFIG_SYS_RIO_MEM_PHYS	CONFIG_SYS_RIO_MEM_BASE
+#define CONFIG_SYS_RIO_MEM_VIRT	0xc0000000	/* base address */
+#define CONFIG_SYS_RIO_MEM_BUS	0xc0000000	/* base address */
+#define CONFIG_SYS_RIO_MEM_PHYS	0xc0000000
 #define CONFIG_SYS_RIO_MEM_SIZE	0x20000000	/* 128M */
 
 /*
  * General PCI
  * Memory space is mapped 1-1, but I/O space must start from 0.
  */
-#define CONFIG_SYS_PCI1_MEM_BASE	0x80000000
-#define CONFIG_SYS_PCI1_MEM_PHYS	CONFIG_SYS_PCI1_MEM_BASE
+#define CONFIG_SYS_PCI1_MEM_VIRT	0x80000000
+#define CONFIG_SYS_PCI1_MEM_BUS	0x80000000
+#define CONFIG_SYS_PCI1_MEM_PHYS	0x80000000
 #define CONFIG_SYS_PCI1_MEM_SIZE	0x20000000	/* 512M */
-#define CONFIG_SYS_PCI1_IO_BASE	0x00000000
+#define CONFIG_SYS_PCI1_IO_VIRT	0xe2000000
+#define CONFIG_SYS_PCI1_IO_BUS	0x00000000
 #define CONFIG_SYS_PCI1_IO_PHYS	0xe2000000
 #define CONFIG_SYS_PCI1_IO_SIZE	0x100000	/* 1M */
 
diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h
index da1f454..58ff52b 100644
--- a/include/configs/MPC8568MDS.h
+++ b/include/configs/MPC8568MDS.h
@@ -322,21 +322,27 @@ extern unsigned long get_clock_freq(void);
  * General PCI
  * Memory Addresses are mapped 1-1. I/O is mapped from 0
  */
-#define CONFIG_SYS_PCI1_MEM_BASE	0x80000000
-#define CONFIG_SYS_PCI1_MEM_PHYS	CONFIG_SYS_PCI1_MEM_BASE
+#define CONFIG_SYS_PCI1_MEM_VIRT	0x80000000
+#define CONFIG_SYS_PCI1_MEM_BUS	0x80000000
+#define CONFIG_SYS_PCI1_MEM_PHYS	0x80000000
 #define CONFIG_SYS_PCI1_MEM_SIZE	0x20000000	/* 512M */
-#define CONFIG_SYS_PCI1_IO_BASE	0x00000000
+#define CONFIG_SYS_PCI1_IO_VIRT	0xe2000000
+#define CONFIG_SYS_PCI1_IO_BUS	0x00000000
 #define CONFIG_SYS_PCI1_IO_PHYS	0xe2000000
 #define CONFIG_SYS_PCI1_IO_SIZE	0x00800000	/* 8M */
 
-#define CONFIG_SYS_PCIE1_MEM_BASE	0xa0000000
-#define CONFIG_SYS_PCIE1_MEM_PHYS	CONFIG_SYS_PCIE1_MEM_BASE
+#define CONFIG_SYS_PCIE1_MEM_VIRT	0xa0000000
+#define CONFIG_SYS_PCIE1_MEM_BUS	0xa0000000
+#define CONFIG_SYS_PCIE1_MEM_PHYS	0xa0000000
 #define CONFIG_SYS_PCIE1_MEM_SIZE	0x20000000	/* 512M */
-#define CONFIG_SYS_PCIE1_IO_BASE	0x00000000
+#define CONFIG_SYS_PCIE1_IO_VIRT	0xe2800000
+#define CONFIG_SYS_PCIE1_IO_BUS	0x00000000
 #define CONFIG_SYS_PCIE1_IO_PHYS	0xe2800000
 #define CONFIG_SYS_PCIE1_IO_SIZE	0x00800000	/* 8M */
 
-#define CONFIG_SYS_SRIO_MEM_BASE	0xc0000000
+#define CONFIG_SYS_SRIO_MEM_VIRT	0xc0000000
+#define CONFIG_SYS_SRIO_MEM_BUS	0xc0000000
+#define CONFIG_SYS_SRIO_MEM_PHYS	0xc0000000
 
 #ifdef CONFIG_QE
 /*
diff --git a/include/configs/MPC8572DS.h b/include/configs/MPC8572DS.h
index f84cc7e..ac0a464 100644
--- a/include/configs/MPC8572DS.h
+++ b/include/configs/MPC8572DS.h
@@ -36,6 +36,7 @@
 #define CONFIG_MP		1	/* support multiple processors */
 #define CONFIG_NUM_CPUS		2	/* Number of CPUs in the system */
 
+#define CONFIG_FSL_ELBC		1	/* Has Enhanced localbus controller */
 #define CONFIG_PCI		1	/* Enable PCI/PCIE */
 #define CONFIG_PCIE1		1	/* PCIE controler 1 (slot 1) */
 #define CONFIG_PCIE2		1	/* PCIE controler 2 (slot 2) */
@@ -74,6 +75,11 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 
 #define CONFIG_ENABLE_36BIT_PHYS	1
 
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_ADDR_MAP			1
+#define CONFIG_SYS_NUM_ADDR_MAP		16	/* number of TLB1 entries */
+#endif
+
 #define CONFIG_SYS_MEMTEST_START	0x00000000	/* memtest works on */
 #define CONFIG_SYS_MEMTEST_END		0x7fffffff
 #define CONFIG_PANIC_HANG	/* do not reset board on panic */
@@ -84,7 +90,11 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
  */
 #define CONFIG_SYS_CCSRBAR_DEFAULT	0xff700000	/* CCSRBAR Default */
 #define CONFIG_SYS_CCSRBAR		0xffe00000	/* relocated CCSRBAR */
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_CCSRBAR_PHYS		0xfffe00000ull	/* physical addr of CCSRBAR */
+#else
 #define CONFIG_SYS_CCSRBAR_PHYS	CONFIG_SYS_CCSRBAR	/* physical addr of CCSRBAR */
+#endif
 #define CONFIG_SYS_IMMR		CONFIG_SYS_CCSRBAR	/* PQII uses CONFIG_SYS_IMMR */
 
 #define CONFIG_SYS_PCIE3_ADDR		(CONFIG_SYS_CCSRBAR+0x8000)
@@ -169,14 +179,19 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
  * Local Bus Definitions
  */
 #define CONFIG_SYS_FLASH_BASE		0xe0000000	/* start of FLASH 128M */
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_FLASH_BASE_PHYS	0xfe0000000ull
+#else
+#define CONFIG_SYS_FLASH_BASE_PHYS	CONFIG_SYS_FLASH_BASE
+#endif
 
-#define CONFIG_SYS_BR0_PRELIM		0xe8001001
-#define CONFIG_SYS_OR0_PRELIM		0xf8000ff7
+#define CONFIG_SYS_BR0_PRELIM  (BR_PHYS_ADDR((CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000)) | BR_PS_16 | BR_V)
+#define CONFIG_SYS_OR0_PRELIM	0xf8000ff7
 
-#define CONFIG_SYS_BR1_PRELIM		0xe0001001
-#define CONFIG_SYS_OR1_PRELIM		0xf8000ff7
+#define CONFIG_SYS_BR1_PRELIM  (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | BR_PS_16 | BR_V)
+#define CONFIG_SYS_OR1_PRELIM	0xf8000ff7
 
-#define CONFIG_SYS_FLASH_BANKS_LIST	{CONFIG_SYS_FLASH_BASE + 0x8000000, CONFIG_SYS_FLASH_BASE}
+#define CONFIG_SYS_FLASH_BANKS_LIST	{CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
 #define CONFIG_SYS_FLASH_QUIET_TEST
 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */
 
@@ -197,8 +212,13 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 
 #define CONFIG_FSL_PIXIS	1	/* use common PIXIS code */
 #define PIXIS_BASE	0xffdf0000	/* PIXIS registers */
+#ifdef CONFIG_PHYS_64BIT
+#define PIXIS_BASE_PHYS	0xfffdf0000ull
+#else
+#define PIXIS_BASE_PHYS	PIXIS_BASE
+#endif
 
-#define CONFIG_SYS_BR3_PRELIM	(PIXIS_BASE | 0x0801)	/* port size 8bit */
+#define CONFIG_SYS_BR3_PRELIM	(BR_PHYS_ADDR(PIXIS_BASE_PHYS) | BR_PS_8 | BR_V)
 #define CONFIG_SYS_OR3_PRELIM		0xffffeff7	/* 32KB but only 4k mapped */
 
 #define PIXIS_ID		0x0	/* Board ID at offset 0 */
@@ -261,7 +281,11 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 #define CONFIG_SYS_MALLOC_LEN		(1024 * 1024)	/* Reserved for malloc */
 
 #define CONFIG_SYS_NAND_BASE		0xffa00000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_NAND_BASE_PHYS	0xfffa00000ull
+#else
 #define CONFIG_SYS_NAND_BASE_PHYS	CONFIG_SYS_NAND_BASE
+#endif
 #define CONFIG_SYS_NAND_BASE_LIST     { CONFIG_SYS_NAND_BASE,\
 				CONFIG_SYS_NAND_BASE + 0x40000, \
 				CONFIG_SYS_NAND_BASE + 0x80000,\
@@ -273,7 +297,7 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 #define CONFIG_SYS_NAND_BLOCK_SIZE    (128 * 1024)
 
 /* NAND flash config */
-#define CONFIG_NAND_BR_PRELIM  (CONFIG_SYS_NAND_BASE_PHYS \
+#define CONFIG_NAND_BR_PRELIM  (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 			       | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
 			       | BR_PS_8	       /* Port Size = 8 bit */ \
 			       | BR_MS_FCM	       /* MSEL = FCM */ \
@@ -290,20 +314,20 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 #define CONFIG_SYS_BR2_PRELIM  CONFIG_NAND_BR_PRELIM  /* NAND Base Address */
 #define CONFIG_SYS_OR2_PRELIM  CONFIG_NAND_OR_PRELIM  /* NAND Options */
 
-#define CONFIG_SYS_BR4_PRELIM  ((CONFIG_SYS_NAND_BASE_PHYS + 0x40000)\
+#define CONFIG_SYS_BR4_PRELIM  (BR_PHYS_ADDR((CONFIG_SYS_NAND_BASE_PHYS + 0x40000))\
 			       | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
 			       | BR_PS_8	       /* Port Size = 8 bit */ \
 			       | BR_MS_FCM	       /* MSEL = FCM */ \
 			       | BR_V)		       /* valid */
 #define CONFIG_SYS_OR4_PRELIM  CONFIG_NAND_OR_PRELIM	 /* NAND Options */
-#define CONFIG_SYS_BR5_PRELIM  ((CONFIG_SYS_NAND_BASE_PHYS + 0x80000)\
+#define CONFIG_SYS_BR5_PRELIM  (BR_PHYS_ADDR((CONFIG_SYS_NAND_BASE_PHYS + 0x80000))\
 			       | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
 			       | BR_PS_8	       /* Port Size = 8 bit */ \
 			       | BR_MS_FCM	       /* MSEL = FCM */ \
 			       | BR_V)		       /* valid */
 #define CONFIG_SYS_OR5_PRELIM  CONFIG_NAND_OR_PRELIM	 /* NAND Options */
 
-#define CONFIG_SYS_BR6_PRELIM  ((CONFIG_SYS_NAND_BASE_PHYS + 0xC0000)\
+#define CONFIG_SYS_BR6_PRELIM  (BR_PHYS_ADDR((CONFIG_SYS_NAND_BASE_PHYS + 0xc0000))\
 			       | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
 			       | BR_PS_8	       /* Port Size = 8 bit */ \
 			       | BR_MS_FCM	       /* MSEL = FCM */ \
@@ -378,33 +402,63 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
  */
 
 /* controller 3, direct to uli, tgtid 3, Base address 8000 */
-#define CONFIG_SYS_PCIE3_MEM_BASE	0x80000000
-#define CONFIG_SYS_PCIE3_MEM_PHYS	CONFIG_SYS_PCIE3_MEM_BASE
+#define CONFIG_SYS_PCIE3_MEM_VIRT	0x80000000
+#define CONFIG_SYS_PCIE3_MEM_BUS	0x80000000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_PCIE3_MEM_PHYS	0xc00000000ull
+#else
+#define CONFIG_SYS_PCIE3_MEM_PHYS	0x80000000
+#endif
 #define CONFIG_SYS_PCIE3_MEM_SIZE	0x20000000	/* 512M */
-#define CONFIG_SYS_PCIE3_IO_BASE	0x00000000
+#define CONFIG_SYS_PCIE3_IO_VIRT	0xffc00000
+#define CONFIG_SYS_PCIE3_IO_BUS	0x00000000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_PCIE3_IO_PHYS	0xfffc00000ull
+#else
 #define CONFIG_SYS_PCIE3_IO_PHYS	0xffc00000
+#endif
 #define CONFIG_SYS_PCIE3_IO_SIZE	0x00010000	/* 64k */
 
 /* controller 2, Slot 2, tgtid 2, Base address 9000 */
-#define CONFIG_SYS_PCIE2_MEM_BASE	0xa0000000
-#define CONFIG_SYS_PCIE2_MEM_PHYS	CONFIG_SYS_PCIE2_MEM_BASE
+#define CONFIG_SYS_PCIE2_MEM_VIRT	0xa0000000
+#define CONFIG_SYS_PCIE2_MEM_BUS	0xa0000000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_PCIE2_MEM_PHYS	0xc20000000ull
+#else
+#define CONFIG_SYS_PCIE2_MEM_PHYS	0xa0000000
+#endif
 #define CONFIG_SYS_PCIE2_MEM_SIZE	0x20000000	/* 512M */
-#define CONFIG_SYS_PCIE2_IO_BASE	0x00000000
+#define CONFIG_SYS_PCIE2_IO_VIRT	0xffc10000
+#define CONFIG_SYS_PCIE2_IO_BUS	0x00000000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_PCIE2_IO_PHYS	0xfffc10000ull
+#else
 #define CONFIG_SYS_PCIE2_IO_PHYS	0xffc10000
+#endif
 #define CONFIG_SYS_PCIE2_IO_SIZE	0x00010000	/* 64k */
 
 /* controller 1, Slot 1, tgtid 1, Base address a000 */
-#define CONFIG_SYS_PCIE1_MEM_BASE	0xc0000000
-#define CONFIG_SYS_PCIE1_MEM_PHYS	CONFIG_SYS_PCIE1_MEM_BASE
+#define CONFIG_SYS_PCIE1_MEM_VIRT	0xc0000000
+#define CONFIG_SYS_PCIE1_MEM_BUS	0xc0000000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_PCIE1_MEM_PHYS	0xc40000000ull
+#else
+#define CONFIG_SYS_PCIE1_MEM_PHYS	0xc0000000
+#endif
 #define CONFIG_SYS_PCIE1_MEM_SIZE	0x20000000	/* 512M */
-#define CONFIG_SYS_PCIE1_IO_BASE	0x00000000
+#define CONFIG_SYS_PCIE1_IO_VIRT	0xffc20000
+#define CONFIG_SYS_PCIE1_IO_BUS	0x00000000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_PCIE1_IO_PHYS	0xfffc20000ull
+#else
 #define CONFIG_SYS_PCIE1_IO_PHYS	0xffc20000
+#endif
 #define CONFIG_SYS_PCIE1_IO_SIZE	0x00010000	/* 64k */
 
 #if defined(CONFIG_PCI)
 
 /*PCIE video card used*/
-#define VIDEO_IO_OFFSET		CONFIG_SYS_PCIE1_IO_PHYS
+#define VIDEO_IO_OFFSET		CONFIG_SYS_PCIE1_IO_VIRT
 
 /* video */
 #define CONFIG_VIDEO
@@ -434,8 +488,8 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 #endif
 
 #ifndef CONFIG_PCI_PNP
-	#define PCI_ENET0_IOADDR	CONFIG_SYS_PCIE3_IO_BASE
-	#define PCI_ENET0_MEMADDR	CONFIG_SYS_PCIE3_IO_BASE
+	#define PCI_ENET0_IOADDR	CONFIG_SYS_PCIE3_IO_BUS
+	#define PCI_ENET0_MEMADDR	CONFIG_SYS_PCIE3_IO_BUS
 	#define PCI_IDSEL_NUMBER	0x11	/* IDSEL = AD11 */
 #endif
 
diff --git a/include/e500.h b/include/e500.h
index 9d3c841..4c5eeb7 100644
--- a/include/e500.h
+++ b/include/e500.h
@@ -8,9 +8,13 @@
 
 #ifndef __ASSEMBLY__
 
+#ifndef CONFIG_NUM_CPUS
+#define CONFIG_NUM_CPUS 1
+#endif
+
 typedef struct
 {
-  unsigned long freqProcessor;
+  unsigned long freqProcessor[CONFIG_NUM_CPUS];
   unsigned long freqSystemBus;
   unsigned long freqDDRBus;
   unsigned long freqLocalBus;