summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorWolfgang Denk <wd@pollux.(none)>2005-09-25 16:50:33 +0200
committerWolfgang Denk <wd@pollux.(none)>2005-09-25 16:50:33 +0200
commit7a22cd535b67e89af88190cd5143ba53f502f064 (patch)
treeaea616c948ead33b913a3fd774334d8ff63705b0
parent875c78934ee252744be1e5b2a9ad7ec5df239239 (diff)
downloadu-boot-imx-7a22cd535b67e89af88190cd5143ba53f502f064.zip
u-boot-imx-7a22cd535b67e89af88190cd5143ba53f502f064.tar.gz
u-boot-imx-7a22cd535b67e89af88190cd5143ba53f502f064.tar.bz2
Fix au1x00_serial baud rate calculation:
remove hardcoded cpu clock divisor and use register instead; round up instead of truncate Patch by Andrew Dyer, 15 Feb 2005
-rw-r--r--CHANGELOG7
-rw-r--r--cpu/mips/au1x00_serial.c16
2 files changed, 20 insertions, 3 deletions
diff --git a/CHANGELOG b/CHANGELOG
index 9444f4d..e189bbb 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,8 +2,13 @@
Changes for U-Boot 1.1.4:
======================================================================
+* Fix au1x00_serial baud rate calculation:
+ remove hardcoded cpu clock divisor and use register instead;
+ round up instead of truncate
+ Patch by Andrew Dyer, 15 Feb 2005
+
* Add Xilinx Spartan3 family FPGA support
- Patch by Kurt Stremerch, 14 February 2005
+ Patch by Kurt Stremerch, 14 Feb 2005
* Fix drivers/cfi_flash.c: use info->reset_cmd instead of FLASH_CMD_RESET
Patch by Zachary Landau, 11 Feb 2005
diff --git a/cpu/mips/au1x00_serial.c b/cpu/mips/au1x00_serial.c
index ac75da5..42c668e 100644
--- a/cpu/mips/au1x00_serial.c
+++ b/cpu/mips/au1x00_serial.c
@@ -70,9 +70,21 @@ void serial_setbrg (void)
{
volatile u32 *uart_clk = (volatile u32*)(UART0_ADDR+UART_CLK);
volatile u32 *uart_lcr = (volatile u32*)(UART0_ADDR+UART_LCR);
+ volatile u32 *sys_powerctrl = (u32 *)SYS_POWERCTRL;
+ int sd;
+ int divisorx2;
- /* Set baudrate - FIXME for bus speeds != CPU/2 */
- *uart_clk = ((CFG_HZ/(CONFIG_BAUDRATE * 64)));
+ /* sd is system clock divisor */
+ /* see section 10.4.5 in au1550 datasheet */
+ sd = (*sys_powerctrl & 0x03) + 2;
+
+ /* calulate 2x baudrate and round */
+ divisorx2 = ((CFG_HZ/(sd * 16 * CONFIG_BAUDRATE)));
+
+ if (divisorx2 & 0x01)
+ divisorx2 = divisorx2 + 1;
+
+ *uart_clk = divisorx2 / 2;
/* Set parity, stop bits and word length to 8N1 */
*uart_lcr = UART_LCR_WLEN8;