* Patches by Martin Krause, 14 Jul 2003:

  - add I2C support for s3c2400 systems (trab board)
  - (re-) add "ping" to command table

* Fix handling of "slow" POST routines

11 files changed, 110 insertions, 39 deletions

diff --git a/CHANGELOG b/CHANGELOG
index 1d8f745..cc1d8c7 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,12 @@
 Changes for U-Boot 0.4.3:
 ======================================================================
 
+* Patches by Martin Krause, 14 Jul 2003:
+  - add I2C support for s3c2400 systems (trab board)
+  - (re-) add "ping" to command table
+
+* Fix handling of "slow" POST routines
+
 * Patches by Yuli Barcohen, 13 Jul 2003:
   - Correct flash and JFFS2 support for MPC8260ADS
   - fix PVR values and clock generation for PowerQUICC II family
diff --git a/README b/README
index fc1d650..ab78984 100644
--- a/README
+++ b/README
@@ -3048,6 +3048,11 @@ it:
   version of diff does not support these options, then get the latest
   version of GNU diff.
 
+  The current directory when running this command shall be the top
+  level directory of the U-Boot source tree, or it's parent directory
+  (i. e. please make sure that your patch includes sufficient
+  directory information for the affected files).
+
   We accept patches as plain text, MIME attachments or as uuencoded
   gzipped text.
 
diff --git a/board/lwmon/lwmon.c b/board/lwmon/lwmon.c
index 04721a3..cf82408 100644
--- a/board/lwmon/lwmon.c
+++ b/board/lwmon/lwmon.c
@@ -1087,7 +1087,6 @@ int post_hotkeys_pressed(gd_t *gd)
 	i2c_write (kbd_addr, 0, 0, &val, 1);
 	i2c_read (kbd_addr, 0, 0, kbd_data, KEYBD_DATALEN);
 
-	return (gd->post_hotkeys_latch = 
-			(compare_magic(kbd_data, CONFIG_POST_KEY_MAGIC) == 0));
+	return (compare_magic(kbd_data, CONFIG_POST_KEY_MAGIC) == 0);
 }
 #endif
diff --git a/board/trab/trab.c b/board/trab/trab.c
index 895c9e1..029fbde 100644
--- a/board/trab/trab.c
+++ b/board/trab/trab.c
@@ -130,6 +130,11 @@ int board_init ()
 	}
 #endif	/* CONFIG_MODEM_SUPPORT */
 
+#ifdef CONFIG_DRIVER_S3C24X0_I2C
+	/* Configure I/O ports PG5 und PG6 for I2C */
+ 	gpio->PGCON = (gpio->PGCON & 0x003c00) | 0x003c00;
+#endif /* CONFIG_DRIVER_S3C24X0_I2C */
+
 	return 0;
 }
 
diff --git a/common/cmd_net.c b/common/cmd_net.c
index fd7ff56..4d4a1ea 100644
--- a/common/cmd_net.c
+++ b/common/cmd_net.c
@@ -210,6 +210,12 @@ int do_ping (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 
 	return 0;
 }
+
+U_BOOT_CMD(
+	ping,	2,	1,	do_ping,
+	"ping    - send ICMP ECHO_REQUEST to network host\n",
+	"pingAddress\n"
+);
 #endif	/* CFG_CMD_PING */
 
 #endif	/* CFG_CMD_NET */
diff --git a/drivers/s3c24x0_i2c.c b/drivers/s3c24x0_i2c.c
index 76b9d95..4158b14 100644
--- a/drivers/s3c24x0_i2c.c
+++ b/drivers/s3c24x0_i2c.c
@@ -63,7 +63,12 @@ static int GetI2CSDA(void)
 {
 	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
 
+#ifdef CONFIG_S3C2410
 	return (gpio->GPEDAT & 0x8000) >> 15;
+#endif
+#ifdef CONFIG_S3C2400
+	return (gpio->PGDAT & 0x0020) >> 5;
+#endif
 }
 
 #if 0
@@ -77,7 +82,12 @@ static void SetI2CSCL(int x)
 {
 	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
 
+#ifdef CONFIG_S3C2410
 	gpio->GPEDAT = (gpio->GPEDAT & ~0x4000) | (x&1) << 14;
+#endif
+#ifdef CONFIG_S3C2400
+	gpio->PGDAT = (gpio->PGDAT & ~0x0040) | (x&1) << 6;
+#endif
 }
 
 
@@ -129,11 +139,22 @@ void i2c_init (int speed, int slaveadd)
     }
 
     if ((status & I2CSTAT_BSY) || GetI2CSDA() == 0) {
+#ifdef CONFIG_S3C2410
 	ulong old_gpecon = gpio->GPECON;
+#endif
+#ifdef CONFIG_S3C2400
+	ulong old_gpecon = gpio->PGCON;
+#endif
 	/* bus still busy probably by (most) previously interrupted transfer */
 
+#ifdef CONFIG_S3C2410
 	/* set I2CSDA and I2CSCL (GPE15, GPE14) to GPIO */
 	gpio->GPECON = (gpio->GPECON & ~0xF0000000) | 0x10000000;
+#endif
+#ifdef CONFIG_S3C2400
+	/* set I2CSDA and I2CSCL (PG5, PG6) to GPIO */
+	gpio->PGCON = (gpio->PGCON & ~0x00003c00) | 0x00000c00;
+#endif
 
 	/* toggle I2CSCL until bus idle */
 	SetI2CSCL(0); udelay(1000);
@@ -146,7 +167,12 @@ void i2c_init (int speed, int slaveadd)
 	SetI2CSCL(1); udelay(1000);
 
 	/* restore pin functions */
+#ifdef CONFIG_S3C2410
 	gpio->GPECON = old_gpecon;
+#endif
+#ifdef CONFIG_S3C2400
+	gpio->PGCON = old_gpecon;
+#endif
     }
 
     /* calculate prescaler and divisor values */
diff --git a/include/asm-ppc/global_data.h b/include/asm-ppc/global_data.h
index 6a0261c..19c7fd8 100644
--- a/include/asm-ppc/global_data.h
+++ b/include/asm-ppc/global_data.h
@@ -73,7 +73,6 @@ typedef	struct	global_data {
 #ifdef CONFIG_POST
 	unsigned long	post_log_word;  /* Record POST activities */
 	unsigned long	post_init_f_time;  /* When post_init_f started */
-	unsigned long	post_hotkeys_latch; /* If the post hotkeys pressed */
 #endif
 #ifdef CONFIG_BOARD_TYPES
 	unsigned long	board_type;
diff --git a/include/configs/trab.h b/include/configs/trab.h
index 15b6b19..4c33bdb 100644
--- a/include/configs/trab.h
+++ b/include/configs/trab.h
@@ -37,9 +37,9 @@
  * (easy to change)
  */
 #define CONFIG_ARM920T		1	/* This is an arm920t CPU	*/
-#define CONFIG_S3C2400		1	/* in a SAMSUNG S3C2400 SoC     */
-#define CONFIG_TRAB		1	/* on a TRAB Board      */
-#undef CONFIG_TRAB_50MHZ		/* run the CPU at 50 MHz */
+#define CONFIG_S3C2400		1	/* in a SAMSUNG S3C2400 SoC	*/
+#define CONFIG_TRAB		1	/* on a TRAB Board		*/
+#undef CONFIG_TRAB_50MHZ		/* run the CPU at 50 MHz	*/
 
 /* input clock of PLL */
 #define CONFIG_SYS_CLK_FREQ	12000000 /* TRAB has 12 MHz input clock */
@@ -50,6 +50,23 @@
 #define CONFIG_SETUP_MEMORY_TAGS 1
 #define CONFIG_INITRD_TAG	 1
 
+
+/***********************************************************
+ * I2C stuff:
+ * the TRAB is equipped with an ATMEL 24C04 EEPROM at
+ * address 0x54 with 8bit addressing
+ ***********************************************************/
+#define CONFIG_HARD_I2C			/* I2C with hardware support */
+#define CFG_I2C_SPEED 		100000	/* I2C speed */
+#define CFG_I2C_SLAVE 		0x7F	/* I2C slave addr */
+
+#define CFG_I2C_EEPROM_ADDR	0x54	/* EEPROM address */
+#define CFG_I2C_EEPROM_ADDR_LEN	1	/* 1 address byte */
+
+#define CFG_I2C_EEPROM_ADDR_OVERFLOW 0x01
+#define CFG_EEPROM_PAGE_WRITE_BITS 3	/* 8 bytes page write mode on 24C04 */
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
+
 /*
  * Size of malloc() pool
  */
@@ -62,13 +79,15 @@
 #define CS8900_BASE		0x07000300 /* agrees with WIN CE PA */
 #define CS8900_BUS16		1 /* the Linux driver does accesses as shorts */
 
+#define CONFIG_DRIVER_S3C24X0_I2C 1	/* we use the buildin I2C controller */
+
 #define CONFIG_VFD		1	/* VFD linear frame buffer driver */
 #define VFD_TEST_LOGO		1	/* output a test logo to the VFDs */
 
 /*
  * select serial console configuration
  */
-#define CONFIG_SERIAL1          1	/* we use SERIAL 1 on TRAB */
+#define CONFIG_SERIAL1		1	/* we use SERIAL 1 on TRAB */
 
 #define CONFIG_HWFLOW			/* include RTS/CTS flow control support	*/
 
@@ -105,18 +124,30 @@
 #define CONFIG_COMMANDS_ADD_VFD		0
 #endif
 
+#ifdef CONFIG_DRIVER_S3C24X0_I2C
+#define CONFIG_COMMANDS_ADD_EEPROM	CFG_CMD_EEPROM
+#define CONFIG_COMMANDS_I2C		CFG_CMD_I2C
+#else
+#define CONFIG_COMMANDS_ADD_EEPROM	0
+#define CONFIG_COMMANDS_I2C		0
+#endif
+
 #ifndef USE_920T_MMU
 #define CONFIG_COMMANDS		((CONFIG_CMD_DFL & ~CFG_CMD_CACHE) | \
 				 CFG_CMD_BSP			| \
 				 CFG_CMD_DATE			| \
 				 CONFIG_COMMANDS_ADD_HWFLOW	| \
-				 CONFIG_COMMANDS_ADD_VFD	)
+				 CONFIG_COMMANDS_ADD_VFD	| \
+				 CONFIG_COMMANDS_ADD_EEPROM	| \
+				 CONFIG_COMMANDS_I2C		)
 #else
 #define CONFIG_COMMANDS		(CONFIG_CMD_DFL			| \
 				 CFG_CMD_BSP			| \
 				 CFG_CMD_DATE			| \
 				 CONFIG_COMMANDS_ADD_HWFLOW	| \
-				 CONFIG_COMMANDS_ADD_VFD	)
+				 CONFIG_COMMANDS_ADD_VFD	| \
+				 CONFIG_COMMANDS_ADD_EEPROM	| \
+				 CONFIG_COMMANDS_I2C		)
 #endif
 
 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
@@ -125,8 +156,8 @@
 #define CONFIG_BOOTDELAY	5
 #define CONFIG_ZERO_BOOTDELAY_CHECK	/* allow to break in always */
 #define CONFIG_PREBOOT		"echo;echo *** booting ***;echo"
-#define CONFIG_BOOTARGS    	"console=ttyS0"
-#define CONFIG_NETMASK          255.255.0.0
+#define CONFIG_BOOTARGS		"console=ttyS0"
+#define CONFIG_NETMASK		255.255.0.0
 #define CONFIG_IPADDR		192.168.3.68
 #define CONFIG_HOSTNAME		trab
 #define CONFIG_SERVERIP		192.168.3.1
@@ -192,6 +223,11 @@
  */
 #define	CFG_LONGHELP				/* undef to save memory		*/
 #define	CFG_PROMPT		"TRAB # "	/* Monitor Command Prompt	*/
+/* #define CFG_HUSH_PARSER		1 */	/* use "hush" command parser	*/
+#ifdef	CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2	"> "
+#endif
+
 #define	CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
 #define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
 #define	CFG_MAXARGS		16		/* max number of command args	*/
@@ -200,7 +236,7 @@
 #define CFG_MEMTEST_START	0x0c000000	/* memtest works on	*/
 #define CFG_MEMTEST_END		0x0d000000	/* 16 MB in DRAM	*/
 
-#undef  CFG_CLKS_IN_HZ		/* everything, incl board info, in Hz */
+#undef CFG_CLKS_IN_HZ		/* everything, incl board info, in Hz */
 
 #define	CFG_LOAD_ADDR		0x0cf00000	/* default load address	*/
 
@@ -235,11 +271,11 @@
 /*-----------------------------------------------------------------------
  * Physical Memory Map
  */
-#define CONFIG_NR_DRAM_BANKS	1	   /* we have 1 bank of DRAM */
-#define PHYS_SDRAM_1		0x0c000000 /* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE	0x01000000 /* 16 MB */
+#define CONFIG_NR_DRAM_BANKS	1		/* we have 1 bank of DRAM */
+#define PHYS_SDRAM_1		0x0c000000	/* SDRAM Bank #1 */
+#define PHYS_SDRAM_1_SIZE	0x01000000	/* 16 MB */
 
-#define CFG_FLASH_BASE		0x00000000 /* Flash Bank #1 */
+#define CFG_FLASH_BASE		0x00000000	/* Flash Bank #1 */
 
 /* The following #defines are needed to get flash environment right */
 #define	CFG_MONITOR_BASE	CFG_FLASH_BASE
diff --git a/lib_i386/board.c b/lib_i386/board.c
index 858ee06..a53fa99 100644
--- a/lib_i386/board.c
+++ b/lib_i386/board.c
@@ -418,10 +418,6 @@ void start_i386boot (void)
 
 #ifdef CONFIG_POST
 	post_run (NULL, POST_RAM | post_bootmode_get(0));
-	if (post_bootmode_get(0) & POST_SLOWTEST) {
-		post_bootmode_clear();
-		board_poweroff();
-	}
 #endif
 
 
diff --git a/lib_ppc/board.c b/lib_ppc/board.c
index 108244e..a9b959b 100644
--- a/lib_ppc/board.c
+++ b/lib_ppc/board.c
@@ -526,10 +526,7 @@ void board_init_f (ulong bootflag)
 
 #ifdef CONFIG_POST
 	post_bootmode_init();
-	if (post_hotkeys_pressed(gd)) /* Force the long-running tests (memory) */
-		post_run (NULL, POST_ROM | POST_SLOWTEST);
-	else
-		post_run (NULL, POST_ROM | post_bootmode_get(0));
+	post_run (NULL, POST_ROM | post_bootmode_get(0));
 #endif
 
 	WATCHDOG_RESET();
@@ -900,14 +897,7 @@ void board_init_r (gd_t *id, ulong dest_addr)
 #endif
 
 #ifdef CONFIG_POST
-	if (gd->post_hotkeys_latch)
-		post_run (NULL, POST_RAM | POST_SLOWTEST);
-	else
-		post_run (NULL, POST_RAM | post_bootmode_get(0));
-	if (post_bootmode_get(0) & POST_SLOWTEST) {
-		post_bootmode_clear();
-		board_poweroff();
-	}
+	post_run (NULL, POST_RAM | post_bootmode_get(0));
 #endif
 
 #if (CONFIG_COMMANDS & CFG_CMD_PCMCIA) && !(CONFIG_COMMANDS & CFG_CMD_IDE)
diff --git a/post/post.c b/post/post.c
index 323447d..0474f1f 100644
--- a/post/post.c
+++ b/post/post.c
@@ -65,9 +65,11 @@ void post_bootmode_init (void)
 	DECLARE_GLOBAL_DATA_PTR;
 	int bootmode = post_bootmode_get (0);
 
-	if (bootmode == 0) {
+	if (post_hotkeys_pressed(gd) && !(bootmode & POST_POWERTEST)) {
+		bootmode = POST_SLOWTEST;
+	} else if (bootmode == 0) {
 		bootmode = POST_POWERON;
-	} else if (bootmode == POST_POWERON) {
+	} else if (bootmode == POST_POWERON || bootmode == POST_SLOWTEST) {
 		bootmode = POST_NORMAL;
 	} else {
 		return;
@@ -96,11 +98,6 @@ int post_bootmode_get (unsigned int *last_test)
 	return bootmode;
 }
 
-void post_bootmode_clear (void)
-{
-	post_word_store (0);
-}
-
 /* POST tests run before relocation only mark status bits .... */
 static void post_log_mark_start ( unsigned long testid )
 {
@@ -203,6 +200,12 @@ static void post_get_flags (int *test_flags)
 			name = s + 1;
 		}
 	}
+
+	for (j = 0; j < post_list_size; j++) {
+		if (test_flags[j] & POST_POWERON) {
+			test_flags[j] |= POST_SLOWTEST;
+		}
+	}
 }
 
 static int post_run_single (struct post_test *test,