summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorWolfgang Denk <wd@denx.de>2008-10-14 13:07:43 +0200
committerWolfgang Denk <wd@denx.de>2008-10-14 13:07:43 +0200
commit65d4a75fa0f57943aa4e7c552d8e0952d95676ec (patch)
treeb85a02134c86fc5fe01f1130b5bf5ae3cf20732d
parent0e8a7b2f1544a593270faf94d028fb48b6b697ea (diff)
parent30f574717277238b9014b8136c90eea77196490f (diff)
downloadu-boot-imx-65d4a75fa0f57943aa4e7c552d8e0952d95676ec.zip
u-boot-imx-65d4a75fa0f57943aa4e7c552d8e0952d95676ec.tar.gz
u-boot-imx-65d4a75fa0f57943aa4e7c552d8e0952d95676ec.tar.bz2
Merge branch 'master' of git://git.denx.de/u-boot-net
-rw-r--r--drivers/net/Makefile7
-rw-r--r--drivers/net/ax88180.c727
-rw-r--r--drivers/net/ax88180.h412
-rw-r--r--drivers/net/ax88796.c2
-rw-r--r--drivers/net/ne2000.c719
-rw-r--r--drivers/net/ne2000_base.c757
-rw-r--r--drivers/net/ne2000_base.h36
-rw-r--r--drivers/net/tsec.c2
8 files changed, 1939 insertions, 723 deletions
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index a084000..439c354 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -26,6 +26,7 @@ include $(TOPDIR)/config.mk
LIB := $(obj)libnet.a
COBJS-$(CONFIG_DRIVER_3C589) += 3c589.o
+COBJS-$(CONFIG_DRIVER_AX88180) += ax88180.o
COBJS-$(CONFIG_BCM570x) += bcm570x.o bcm570x_autoneg.o 5701rls.o
COBJS-$(CONFIG_BFIN_MAC) += bfin_mac.o
COBJS-$(CONFIG_DRIVER_CS8900) += cs8900.o
@@ -44,10 +45,8 @@ COBJS-$(CONFIG_MCFFEC) += mcffec.o
COBJS-$(CONFIG_MPC5xxx_FEC) += mpc5xxx_fec.o
COBJS-$(CONFIG_MPC512x_FEC) += mpc512x_fec.o
COBJS-$(CONFIG_NATSEMI) += natsemi.o
-ifeq ($(CONFIG_DRIVER_NE2000),y)
-COBJS-y += ne2000.o
-COBJS-$(CONFIG_DRIVER_AX88796L) += ax88796.o
-endif
+COBJS-$(CONFIG_DRIVER_NE2000) += ne2000.o ne2000_base.o
+COBJS-$(CONFIG_DRIVER_AX88796L) += ax88796.o ne2000_base.o
COBJS-$(CONFIG_DRIVER_NETARMETH) += netarm_eth.o
COBJS-$(CONFIG_NETCONSOLE) += netconsole.o
COBJS-$(CONFIG_DRIVER_NS7520_ETHERNET) += ns7520_eth.o
diff --git a/drivers/net/ax88180.c b/drivers/net/ax88180.c
new file mode 100644
index 0000000..d843397
--- /dev/null
+++ b/drivers/net/ax88180.c
@@ -0,0 +1,727 @@
+/*
+ * ax88180: ASIX AX88180 Non-PCI Gigabit Ethernet u-boot driver
+ *
+ * This program is free software; you can distribute it and/or modify
+ * it under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ * This program is distributed in the hope it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ * See the GNU General Public License for more details.
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307,
+ * USA.
+ */
+
+/*
+ * ========================================================================
+ * ASIX AX88180 Non-PCI 16/32-bit Gigabit Ethernet Linux Driver
+ *
+ * The AX88180 Ethernet controller is a high performance and highly
+ * integrated local CPU bus Ethernet controller with embedded 40K bytes
+ * SRAM and supports both 16-bit and 32-bit SRAM-Like interfaces for any
+ * embedded systems.
+ * The AX88180 is a single chip 10/100/1000Mbps Gigabit Ethernet
+ * controller that supports both MII and RGMII interfaces and is
+ * compliant to IEEE 802.3, IEEE 802.3u and IEEE 802.3z standards.
+ *
+ * Please visit ASIX's web site (http://www.asix.com.tw) for more
+ * details.
+ *
+ * Module Name : ax88180.c
+ * Date : 2008-07-07
+ * History
+ * 09/06/2006 : New release for AX88180 US2 chip.
+ * 07/07/2008 : Fix up the coding style and using inline functions
+ * instead of macros
+ * ========================================================================
+ */
+#include <common.h>
+#include <command.h>
+#include <net.h>
+#include <malloc.h>
+#include "ax88180.h"
+
+/*
+ * ===========================================================================
+ * Local SubProgram Declaration
+ * ===========================================================================
+ */
+static void ax88180_rx_handler (struct eth_device *dev);
+static int ax88180_phy_initial (struct eth_device *dev);
+static void ax88180_meidia_config (struct eth_device *dev);
+static unsigned long get_CicadaPHY_meida_mode (struct eth_device *dev);
+static unsigned long get_MarvellPHY_meida_mode (struct eth_device *dev);
+static unsigned short ax88180_mdio_read (struct eth_device *dev,
+ unsigned long regaddr);
+static void ax88180_mdio_write (struct eth_device *dev,
+ unsigned long regaddr, unsigned short regdata);
+
+/*
+ * ===========================================================================
+ * Local SubProgram Bodies
+ * ===========================================================================
+ */
+static int ax88180_mdio_check_complete (struct eth_device *dev)
+{
+ int us_cnt = 10000;
+ unsigned short tmpval;
+
+ /* MDIO read/write should not take more than 10 ms */
+ while (--us_cnt) {
+ tmpval = INW (dev, MDIOCTRL);
+ if (((tmpval & READ_PHY) == 0) && ((tmpval & WRITE_PHY) == 0))
+ break;
+ }
+
+ return us_cnt;
+}
+
+static unsigned short
+ax88180_mdio_read (struct eth_device *dev, unsigned long regaddr)
+{
+ struct ax88180_private *priv = (struct ax88180_private *)dev->priv;
+ unsigned long tmpval = 0;
+
+ OUTW (dev, (READ_PHY | (regaddr << 8) | priv->PhyAddr), MDIOCTRL);
+
+ if (ax88180_mdio_check_complete (dev))
+ tmpval = INW (dev, MDIODP);
+ else
+ printf ("Failed to read PHY register!\n");
+
+ return (unsigned short)(tmpval & 0xFFFF);
+}
+
+static void
+ax88180_mdio_write (struct eth_device *dev, unsigned long regaddr,
+ unsigned short regdata)
+{
+ struct ax88180_private *priv = (struct ax88180_private *)dev->priv;
+
+ OUTW (dev, regdata, MDIODP);
+
+ OUTW (dev, (WRITE_PHY | (regaddr << 8) | priv->PhyAddr), MDIOCTRL);
+
+ if (!ax88180_mdio_check_complete (dev))
+ printf ("Failed to write PHY register!\n");
+}
+
+static int ax88180_phy_reset (struct eth_device *dev)
+{
+ unsigned short delay_cnt = 500;
+
+ ax88180_mdio_write (dev, BMCR, (PHY_RESET | AUTONEG_EN));
+
+ /* Wait for the reset to complete, or time out (500 ms) */
+ while (ax88180_mdio_read (dev, BMCR) & PHY_RESET) {
+ udelay (1000);
+ if (--delay_cnt == 0) {
+ printf ("Failed to reset PHY!\n");
+ return -1;
+ }
+ }
+
+ return 0;
+}
+
+static void ax88180_mac_reset (struct eth_device *dev)
+{
+ unsigned long tmpval;
+ unsigned char i;
+
+ struct {
+ unsigned short offset, value;
+ } program_seq[] = {
+ {
+ MISC, MISC_NORMAL}, {
+ RXINDICATOR, DEFAULT_RXINDICATOR}, {
+ TXCMD, DEFAULT_TXCMD}, {
+ TXBS, DEFAULT_TXBS}, {
+ TXDES0, DEFAULT_TXDES0}, {
+ TXDES1, DEFAULT_TXDES1}, {
+ TXDES2, DEFAULT_TXDES2}, {
+ TXDES3, DEFAULT_TXDES3}, {
+ TXCFG, DEFAULT_TXCFG}, {
+ MACCFG2, DEFAULT_MACCFG2}, {
+ MACCFG3, DEFAULT_MACCFG3}, {
+ TXLEN, DEFAULT_TXLEN}, {
+ RXBTHD0, DEFAULT_RXBTHD0}, {
+ RXBTHD1, DEFAULT_RXBTHD1}, {
+ RXFULTHD, DEFAULT_RXFULTHD}, {
+ DOGTHD0, DEFAULT_DOGTHD0}, {
+ DOGTHD1, DEFAULT_DOGTHD1},};
+
+ OUTW (dev, MISC_RESET_MAC, MISC);
+ tmpval = INW (dev, MISC);
+
+ for (i = 0; i < (sizeof (program_seq) / sizeof (program_seq[0])); i++)
+ OUTW (dev, program_seq[i].value, program_seq[i].offset);
+}
+
+static int ax88180_poll_tx_complete (struct eth_device *dev)
+{
+ struct ax88180_private *priv = (struct ax88180_private *)dev->priv;
+ unsigned long tmpval, txbs_txdp;
+ int TimeOutCnt = 10000;
+
+ txbs_txdp = 1 << priv->NextTxDesc;
+
+ while (TimeOutCnt--) {
+
+ tmpval = INW (dev, TXBS);
+
+ if ((tmpval & txbs_txdp) == 0)
+ break;
+
+ udelay (100);
+ }
+
+ if (TimeOutCnt)
+ return 0;
+ else
+ return -TimeOutCnt;
+}
+
+static void ax88180_rx_handler (struct eth_device *dev)
+{
+ struct ax88180_private *priv = (struct ax88180_private *)dev->priv;
+ unsigned long data_size;
+ unsigned short rxcurt_ptr, rxbound_ptr, next_ptr;
+ int i;
+#if defined (CONFIG_DRIVER_AX88180_16BIT)
+ unsigned short *rxdata = (unsigned short *)NetRxPackets[0];
+#else
+ unsigned long *rxdata = (unsigned long *)NetRxPackets[0];
+#endif
+ unsigned short count;
+
+ rxcurt_ptr = INW (dev, RXCURT);
+ rxbound_ptr = INW (dev, RXBOUND);
+ next_ptr = (rxbound_ptr + 1) & RX_PAGE_NUM_MASK;
+
+ debug ("ax88180: RX original RXBOUND=0x%04x,"
+ " RXCURT=0x%04x\n", rxbound_ptr, rxcurt_ptr);
+
+ while (next_ptr != rxcurt_ptr) {
+
+ OUTW (dev, RX_START_READ, RXINDICATOR);
+
+ data_size = READ_RXBUF (dev) & 0xFFFF;
+
+ if ((data_size == 0) || (data_size > MAX_RX_SIZE)) {
+
+ OUTW (dev, RX_STOP_READ, RXINDICATOR);
+
+ ax88180_mac_reset (dev);
+ printf ("ax88180: Invalid Rx packet length!"
+ " (len=0x%04lx)\n", data_size);
+
+ debug ("ax88180: RX RXBOUND=0x%04x,"
+ "RXCURT=0x%04x\n", rxbound_ptr, rxcurt_ptr);
+ return;
+ }
+
+ rxbound_ptr += (((data_size + 0xF) & 0xFFF0) >> 4) + 1;
+ rxbound_ptr &= RX_PAGE_NUM_MASK;
+
+ /* Comput access times */
+ count = (data_size + priv->PadSize) >> priv->BusWidth;
+
+ for (i = 0; i < count; i++) {
+ *(rxdata + i) = READ_RXBUF (dev);
+ }
+
+ OUTW (dev, RX_STOP_READ, RXINDICATOR);
+
+ /* Pass the packet up to the protocol layers. */
+ NetReceive (NetRxPackets[0], data_size);
+
+ OUTW (dev, rxbound_ptr, RXBOUND);
+
+ rxcurt_ptr = INW (dev, RXCURT);
+ rxbound_ptr = INW (dev, RXBOUND);
+ next_ptr = (rxbound_ptr + 1) & RX_PAGE_NUM_MASK;
+
+ debug ("ax88180: RX updated RXBOUND=0x%04x,"
+ "RXCURT=0x%04x\n", rxbound_ptr, rxcurt_ptr);
+ }
+
+ return;
+}
+
+static int ax88180_phy_initial (struct eth_device *dev)
+{
+ struct ax88180_private *priv = (struct ax88180_private *)dev->priv;
+ unsigned long tmp_regval;
+
+ /* Check avaliable PHY chipset */
+ priv->PhyAddr = MARVELL_88E1111_PHYADDR;
+ priv->PhyID0 = ax88180_mdio_read (dev, PHYIDR0);
+
+ if (priv->PhyID0 == MARVELL_88E1111_PHYIDR0) {
+
+ debug ("ax88180: Found Marvell 88E1111 PHY."
+ " (PHY Addr=0x%x)\n", priv->PhyAddr);
+
+ tmp_regval = ax88180_mdio_read (dev, M88_EXT_SSR);
+ if ((tmp_regval & HWCFG_MODE_MASK) == RGMII_COPPER_MODE) {
+
+ ax88180_mdio_write (dev, M88_EXT_SCR, DEFAULT_EXT_SCR);
+ if (ax88180_phy_reset (dev) < 0)
+ return 0;
+ ax88180_mdio_write (dev, M88_IER, LINK_CHANGE_INT);
+ }
+ } else {
+
+ priv->PhyAddr = CICADA_CIS8201_PHYADDR;
+ priv->PhyID0 = ax88180_mdio_read (dev, PHYIDR0);
+
+ if (priv->PhyID0 == CICADA_CIS8201_PHYIDR0) {
+
+ debug ("ax88180: Found CICADA CIS8201 PHY"
+ " chipset. (PHY Addr=0x%x)\n", priv->PhyAddr);
+ ax88180_mdio_write (dev, CIS_IMR,
+ (CIS_INT_ENABLE | LINK_CHANGE_INT));
+
+ /* Set CIS_SMI_PRIORITY bit before force the media mode */
+ tmp_regval =
+ ax88180_mdio_read (dev, CIS_AUX_CTRL_STATUS);
+ tmp_regval &= ~CIS_SMI_PRIORITY;
+ ax88180_mdio_write (dev, CIS_AUX_CTRL_STATUS,
+ tmp_regval);
+ } else {
+ printf ("ax88180: Unknown PHY chipset!!\n");
+ return 0;
+ }
+ }
+
+ return 1;
+}
+
+static void ax88180_meidia_config (struct eth_device *dev)
+{
+ struct ax88180_private *priv = (struct ax88180_private *)dev->priv;
+ unsigned long bmcr_val, bmsr_val;
+ unsigned long rxcfg_val, maccfg0_val, maccfg1_val;
+ unsigned long RealMediaMode;
+ int i;
+
+ /* Waiting 2 seconds for PHY link stable */
+ for (i = 0; i < 20000; i++) {
+ bmsr_val = ax88180_mdio_read (dev, BMSR);
+ if (bmsr_val & LINKOK) {
+ break;
+ }
+ udelay (100);
+ }
+
+ bmsr_val = ax88180_mdio_read (dev, BMSR);
+ debug ("ax88180: BMSR=0x%04x\n", (unsigned int)bmsr_val);
+
+ if (bmsr_val & LINKOK) {
+ bmcr_val = ax88180_mdio_read (dev, BMCR);
+
+ if (bmcr_val & AUTONEG_EN) {
+
+ /*
+ * Waiting for Auto-negotiation completion, this may
+ * take up to 5 seconds.
+ */
+ debug ("ax88180: Auto-negotiation is "
+ "enabled. Waiting for NWay completion..\n");
+ for (i = 0; i < 50000; i++) {
+ bmsr_val = ax88180_mdio_read (dev, BMSR);
+ if (bmsr_val & AUTONEG_COMPLETE) {
+ break;
+ }
+ udelay (100);
+ }
+ } else
+ debug ("ax88180: Auto-negotiation is disabled.\n");
+
+ debug ("ax88180: BMCR=0x%04x, BMSR=0x%04x\n",
+ (unsigned int)bmcr_val, (unsigned int)bmsr_val);
+
+ /* Get real media mode here */
+ if (priv->PhyID0 == MARVELL_88E1111_PHYIDR0) {
+ RealMediaMode = get_MarvellPHY_meida_mode (dev);
+ } else if (priv->PhyID0 == CICADA_CIS8201_PHYIDR0) {
+ RealMediaMode = get_CicadaPHY_meida_mode (dev);
+ } else {
+ RealMediaMode = MEDIA_1000FULL;
+ }
+
+ priv->LinkState = INS_LINK_UP;
+
+ switch (RealMediaMode) {
+ case MEDIA_1000FULL:
+ debug ("ax88180: 1000Mbps Full-duplex mode.\n");
+ rxcfg_val = RXFLOW_ENABLE | DEFAULT_RXCFG;
+ maccfg0_val = TXFLOW_ENABLE | DEFAULT_MACCFG0;
+ maccfg1_val = GIGA_MODE_EN | RXFLOW_EN |
+ FULLDUPLEX | DEFAULT_MACCFG1;
+ break;
+
+ case MEDIA_1000HALF:
+ debug ("ax88180: 1000Mbps Half-duplex mode.\n");
+ rxcfg_val = DEFAULT_RXCFG;
+ maccfg0_val = DEFAULT_MACCFG0;
+ maccfg1_val = GIGA_MODE_EN | DEFAULT_MACCFG1;
+ break;
+
+ case MEDIA_100FULL:
+ debug ("ax88180: 100Mbps Full-duplex mode.\n");
+ rxcfg_val = RXFLOW_ENABLE | DEFAULT_RXCFG;
+ maccfg0_val = SPEED100 | TXFLOW_ENABLE
+ | DEFAULT_MACCFG0;
+ maccfg1_val = RXFLOW_EN | FULLDUPLEX | DEFAULT_MACCFG1;
+ break;
+
+ case MEDIA_100HALF:
+ debug ("ax88180: 100Mbps Half-duplex mode.\n");
+ rxcfg_val = DEFAULT_RXCFG;
+ maccfg0_val = SPEED100 | DEFAULT_MACCFG0;
+ maccfg1_val = DEFAULT_MACCFG1;
+ break;
+
+ case MEDIA_10FULL:
+ debug ("ax88180: 10Mbps Full-duplex mode.\n");
+ rxcfg_val = RXFLOW_ENABLE | DEFAULT_RXCFG;
+ maccfg0_val = TXFLOW_ENABLE | DEFAULT_MACCFG0;
+ maccfg1_val = RXFLOW_EN | FULLDUPLEX | DEFAULT_MACCFG1;
+ break;
+
+ case MEDIA_10HALF:
+ debug ("ax88180: 10Mbps Half-duplex mode.\n");
+ rxcfg_val = DEFAULT_RXCFG;
+ maccfg0_val = DEFAULT_MACCFG0;
+ maccfg1_val = DEFAULT_MACCFG1;
+ break;
+ default:
+ debug ("ax88180: Unknow media mode.\n");
+ rxcfg_val = DEFAULT_RXCFG;
+ maccfg0_val = DEFAULT_MACCFG0;
+ maccfg1_val = DEFAULT_MACCFG1;
+
+ priv->LinkState = INS_LINK_DOWN;
+ break;
+ }
+
+ } else {
+ rxcfg_val = DEFAULT_RXCFG;
+ maccfg0_val = DEFAULT_MACCFG0;
+ maccfg1_val = DEFAULT_MACCFG1;
+
+ priv->LinkState = INS_LINK_DOWN;
+ }
+
+ OUTW (dev, rxcfg_val, RXCFG);
+ OUTW (dev, maccfg0_val, MACCFG0);
+ OUTW (dev, maccfg1_val, MACCFG1);
+
+ return;
+}
+
+static unsigned long get_MarvellPHY_meida_mode (struct eth_device *dev)
+{
+ unsigned long m88_ssr;
+ unsigned long MediaMode;
+
+ m88_ssr = ax88180_mdio_read (dev, M88_SSR);
+ switch (m88_ssr & SSR_MEDIA_MASK) {
+ case SSR_1000FULL:
+ MediaMode = MEDIA_1000FULL;
+ break;
+ case SSR_1000HALF:
+ MediaMode = MEDIA_1000HALF;
+ break;
+ case SSR_100FULL:
+ MediaMode = MEDIA_100FULL;
+ break;
+ case SSR_100HALF:
+ MediaMode = MEDIA_100HALF;
+ break;
+ case SSR_10FULL:
+ MediaMode = MEDIA_10FULL;
+ break;
+ case SSR_10HALF:
+ MediaMode = MEDIA_10HALF;
+ break;
+ default:
+ MediaMode = MEDIA_UNKNOWN;
+ break;
+ }
+
+ return MediaMode;
+}
+
+static unsigned long get_CicadaPHY_meida_mode (struct eth_device *dev)
+{
+ unsigned long tmp_regval;
+ unsigned long MediaMode;
+
+ tmp_regval = ax88180_mdio_read (dev, CIS_AUX_CTRL_STATUS);
+ switch (tmp_regval & CIS_MEDIA_MASK) {
+ case CIS_1000FULL:
+ MediaMode = MEDIA_1000FULL;
+ break;
+ case CIS_1000HALF:
+ MediaMode = MEDIA_1000HALF;
+ break;
+ case CIS_100FULL:
+ MediaMode = MEDIA_100FULL;
+ break;
+ case CIS_100HALF:
+ MediaMode = MEDIA_100HALF;
+ break;
+ case CIS_10FULL:
+ MediaMode = MEDIA_10FULL;
+ break;
+ case CIS_10HALF:
+ MediaMode = MEDIA_10HALF;
+ break;
+ default:
+ MediaMode = MEDIA_UNKNOWN;
+ break;
+ }
+
+ return MediaMode;
+}
+
+static void ax88180_halt (struct eth_device *dev)
+{
+ /* Disable AX88180 TX/RX functions */
+ OUTW (dev, WAKEMOD, CMD);
+}
+
+static int ax88180_init (struct eth_device *dev, bd_t * bd)
+{
+ struct ax88180_private *priv = (struct ax88180_private *)dev->priv;
+ unsigned short tmp_regval;
+
+ ax88180_mac_reset (dev);
+
+ /* Disable interrupt */
+ OUTW (dev, CLEAR_IMR, IMR);
+
+ /* Disable AX88180 TX/RX functions */
+ OUTW (dev, WAKEMOD, CMD);
+
+ /* Fill the MAC address */
+ tmp_regval =
+ dev->enetaddr[0] | (((unsigned short)dev->enetaddr[1]) << 8);
+ OUTW (dev, tmp_regval, MACID0);
+
+ tmp_regval =
+ dev->enetaddr[2] | (((unsigned short)dev->enetaddr[3]) << 8);
+ OUTW (dev, tmp_regval, MACID1);
+
+ tmp_regval =
+ dev->enetaddr[4] | (((unsigned short)dev->enetaddr[5]) << 8);
+ OUTW (dev, tmp_regval, MACID2);
+
+ ax88180_meidia_config (dev);
+
+ OUTW (dev, DEFAULT_RXFILTER, RXFILTER);
+
+ /* Initial variables here */
+ priv->FirstTxDesc = TXDP0;
+ priv->NextTxDesc = TXDP0;
+
+ /* Check if there is any invalid interrupt status and clear it. */
+ OUTW (dev, INW (dev, ISR), ISR);
+
+ /* Start AX88180 TX/RX functions */
+ OUTW (dev, (RXEN | TXEN | WAKEMOD), CMD);
+
+ return 0;
+}
+
+/* Get a data block via Ethernet */
+static int ax88180_recv (struct eth_device *dev)
+{
+ unsigned short ISR_Status;
+ unsigned short tmp_regval;
+
+ /* Read and check interrupt status here. */
+ ISR_Status = INW (dev, ISR);
+
+ while (ISR_Status) {
+ /* Clear the interrupt status */
+ OUTW (dev, ISR_Status, ISR);
+
+ debug ("\nax88180: The interrupt status = 0x%04x\n",
+ ISR_Status);
+
+ if (ISR_Status & ISR_PHY) {
+ /* Read ISR register once to clear PHY interrupt bit */
+ tmp_regval = ax88180_mdio_read (dev, M88_ISR);
+ ax88180_meidia_config (dev);
+ }
+
+ if ((ISR_Status & ISR_RX) || (ISR_Status & ISR_RXBUFFOVR)) {
+ ax88180_rx_handler (dev);
+ }
+
+ /* Read and check interrupt status again */
+ ISR_Status = INW (dev, ISR);
+ }
+
+ return 0;
+}
+
+/* Send a data block via Ethernet. */
+static int
+ax88180_send (struct eth_device *dev, volatile void *packet, int length)
+{
+ struct ax88180_private *priv = (struct ax88180_private *)dev->priv;
+ unsigned short TXDES_addr;
+ unsigned short txcmd_txdp, txbs_txdp;
+ unsigned short tmp_data;
+ int i;
+#if defined (CONFIG_DRIVER_AX88180_16BIT)
+ volatile unsigned short *txdata = (volatile unsigned short *)packet;
+#else
+ volatile unsigned long *txdata = (volatile unsigned long *)packet;
+#endif
+ unsigned short count;
+
+ if (priv->LinkState != INS_LINK_UP) {
+ return 0;
+ }
+
+ priv->FirstTxDesc = priv->NextTxDesc;
+ txbs_txdp = 1 << priv->FirstTxDesc;
+
+ debug ("ax88180: TXDP%d is available\n", priv->FirstTxDesc);
+
+ txcmd_txdp = priv->FirstTxDesc << 13;
+ TXDES_addr = TXDES0 + (priv->FirstTxDesc << 2);
+
+ OUTW (dev, (txcmd_txdp | length | TX_START_WRITE), TXCMD);
+
+ /* Comput access times */
+ count = (length + priv->PadSize) >> priv->BusWidth;
+
+ for (i = 0; i < count; i++) {
+ WRITE_TXBUF (dev, *(txdata + i));
+ }
+
+ OUTW (dev, txcmd_txdp | length, TXCMD);
+ OUTW (dev, txbs_txdp, TXBS);
+ OUTW (dev, (TXDPx_ENABLE | length), TXDES_addr);
+
+ priv->NextTxDesc = (priv->NextTxDesc + 1) & TXDP_MASK;
+
+ /*
+ * Check the available transmit descriptor, if we had exhausted all
+ * transmit descriptor ,then we have to wait for at least one free
+ * descriptor
+ */
+ txbs_txdp = 1 << priv->NextTxDesc;
+ tmp_data = INW (dev, TXBS);
+
+ if (tmp_data & txbs_txdp) {
+ if (ax88180_poll_tx_complete (dev) < 0) {
+ ax88180_mac_reset (dev);
+ priv->FirstTxDesc = TXDP0;
+ priv->NextTxDesc = TXDP0;
+ printf ("ax88180: Transmit time out occurred!\n");
+ }
+ }
+
+ return 0;
+}
+
+static void ax88180_read_mac_addr (struct eth_device *dev)
+{
+ unsigned short macid0_val, macid1_val, macid2_val;
+ unsigned short tmp_regval;
+ unsigned short i;
+
+ /* Reload MAC address from EEPROM */
+ OUTW (dev, RELOAD_EEPROM, PROMCTRL);
+
+ /* Waiting for reload eeprom completion */
+ for (i = 0; i < 500; i++) {
+ tmp_regval = INW (dev, PROMCTRL);
+ if ((tmp_regval & RELOAD_EEPROM) == 0)
+ break;
+ udelay (1000);
+ }
+
+ /* Get MAC addresses */
+ macid0_val = INW (dev, MACID0);
+ macid1_val = INW (dev, MACID1);
+ macid2_val = INW (dev, MACID2);
+
+ if (((macid0_val | macid1_val | macid2_val) != 0) &&
+ ((macid0_val & 0x01) == 0)) {
+ dev->enetaddr[0] = (unsigned char)macid0_val;
+ dev->enetaddr[1] = (unsigned char)(macid0_val >> 8);
+ dev->enetaddr[2] = (unsigned char)macid1_val;
+ dev->enetaddr[3] = (unsigned char)(macid1_val >> 8);
+ dev->enetaddr[4] = (unsigned char)macid2_val;
+ dev->enetaddr[5] = (unsigned char)(macid2_val >> 8);
+ }
+}
+
+/*
+===========================================================================
+<<<<<< Exported SubProgram Bodies >>>>>>
+===========================================================================
+*/
+int ax88180_initialize (bd_t * bis)
+{
+ struct eth_device *dev;
+ struct ax88180_private *priv;
+
+ dev = (struct eth_device *)malloc (sizeof *dev);
+
+ if (NULL == dev)
+ return 0;
+
+ memset (dev, 0, sizeof *dev);
+
+ priv = (struct ax88180_private *)malloc (sizeof (*priv));
+
+ if (NULL == priv)
+ return 0;
+
+ memset (priv, 0, sizeof *priv);
+
+ sprintf (dev->name, "ax88180");
+ dev->iobase = AX88180_BASE;
+ dev->priv = priv;
+ dev->init = ax88180_init;
+ dev->halt = ax88180_halt;
+ dev->send = ax88180_send;
+ dev->recv = ax88180_recv;
+
+ priv->BusWidth = BUS_WIDTH_32;
+ priv->PadSize = 3;
+#if defined (CONFIG_DRIVER_AX88180_16BIT)
+ OUTW (dev, (START_BASE >> 8), BASE);
+ OUTW (dev, DECODE_EN, DECODE);
+
+ priv->BusWidth = BUS_WIDTH_16;
+ priv->PadSize = 1;
+#endif
+
+ ax88180_mac_reset (dev);
+
+ /* Disable interrupt */
+ OUTW (dev, CLEAR_IMR, IMR);
+
+ /* Disable AX88180 TX/RX functions */
+ OUTW (dev, WAKEMOD, CMD);
+
+ ax88180_read_mac_addr (dev);
+
+ eth_register (dev);
+
+ return ax88180_phy_initial (dev);
+
+}
diff --git a/drivers/net/ax88180.h b/drivers/net/ax88180.h
new file mode 100644
index 0000000..5254e7d
--- /dev/null
+++ b/drivers/net/ax88180.h
@@ -0,0 +1,412 @@
+/* ax88180.h: ASIX AX88180 Non-PCI Gigabit Ethernet u-boot driver */
+/*
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ */
+
+#ifndef _AX88180_H_
+#define _AX88180_H_
+
+#include <asm/types.h>
+#include <config.h>
+
+typedef enum _ax88180_link_state {
+ INS_LINK_DOWN,
+ INS_LINK_UP,
+ INS_LINK_UNKNOWN
+} ax88180_link_state;
+
+struct ax88180_private {
+ unsigned char BusWidth;
+ unsigned char PadSize;
+ unsigned short PhyAddr;
+ unsigned short PhyID0;
+ unsigned short FirstTxDesc;
+ unsigned short NextTxDesc;
+ ax88180_link_state LinkState;
+};
+
+#define BUS_WIDTH_16 1
+#define BUS_WIDTH_32 2
+
+#define ENABLE_JUMBO 1
+#define DISABLE_JUMBO 0
+
+#define ENABLE_BURST 1
+#define DISABLE_BURST 0
+
+#define NORMAL_RX_MODE 0
+#define RX_LOOPBACK_MODE 1
+#define RX_INIFINIT_LOOP_MODE 2
+#define TX_INIFINIT_LOOP_MODE 3
+
+#define DEFAULT_ETH_MTU 1500
+
+/* Jumbo packet size 4086 bytes included 4 bytes CRC*/
+#define MAX_JUMBO_MTU 4072
+
+/* Max Tx Jumbo size 4086 bytes included 4 bytes CRC */
+#define MAX_TX_JUMBO_SIZE 4086
+
+/* Max Rx Jumbo size is 15K Bytes */
+#define MAX_RX_SIZE 0x3C00
+
+#define MARVELL_88E1111_PHYADDR 0x18
+#define MARVELL_88E1111_PHYIDR0 0x0141
+
+#define CICADA_CIS8201_PHYADDR 0x01
+#define CICADA_CIS8201_PHYIDR0 0x000F
+
+#define MEDIA_AUTO 0
+#define MEDIA_1000FULL 1
+#define MEDIA_1000HALF 2
+#define MEDIA_100FULL 3
+#define MEDIA_100HALF 4
+#define MEDIA_10FULL 5
+#define MEDIA_10HALF 6
+#define MEDIA_UNKNOWN 7
+
+#define AUTO_MEDIA 0
+#define FORCE_MEDIA 1
+
+#define TXDP_MASK 3
+#define TXDP0 0
+#define TXDP1 1
+#define TXDP2 2
+#define TXDP3 3
+
+#define CMD_MAP_SIZE 0x100
+
+#if defined (CONFIG_DRIVER_AX88180_16BIT)
+ #define AX88180_MEMORY_SIZE 0x00004000
+ #define START_BASE 0x1000
+
+ #define RX_BUF_SIZE 0x1000
+ #define TX_BUF_SIZE 0x0F00
+
+ #define TX_BASE START_BASE
+ #define CMD_BASE (TX_BASE + TX_BUF_SIZE)
+ #define RX_BASE (CMD_BASE + CMD_MAP_SIZE)
+#else
+ #define AX88180_MEMORY_SIZE 0x00010000
+
+ #define RX_BUF_SIZE 0x8000
+ #define TX_BUF_SIZE 0x7C00
+
+ #define RX_BASE 0x0000
+ #define TX_BASE (RX_BASE + RX_BUF_SIZE)
+ #define CMD_BASE (TX_BASE + TX_BUF_SIZE)
+#endif
+
+/* AX88180 Memory Mapping Definition */
+#define RXBUFFER_START RX_BASE
+ #define RX_PACKET_LEN_OFFSET 0
+ #define RX_PAGE_NUM_MASK 0x7FF /* RX pages 0~7FFh */
+#define TXBUFFER_START TX_BASE
+
+/* AX88180 MAC Register Definition */
+#define DECODE (0)
+ #define DECODE_EN 0x00000001
+#define BASE (6)
+#define CMD (CMD_BASE + 0x0000)
+ #define WAKEMOD 0x00000001
+ #define TXEN 0x00000100
+ #define RXEN 0x00000200
+ #define DEFAULT_CMD WAKEMOD
+#define IMR (CMD_BASE + 0x0004)
+ #define IMR_RXBUFFOVR 0x00000001
+ #define IMR_WATCHDOG 0x00000002
+ #define IMR_TX 0x00000008
+ #define IMR_RX 0x00000010
+ #define IMR_PHY 0x00000020
+ #define CLEAR_IMR 0x00000000
+ #define DEFAULT_IMR (IMR_PHY | IMR_RX | IMR_TX |\
+ IMR_RXBUFFOVR | IMR_WATCHDOG)
+#define ISR (CMD_BASE + 0x0008)
+ #define ISR_RXBUFFOVR 0x00000001
+ #define ISR_WATCHDOG 0x00000002
+ #define ISR_TX 0x00000008
+ #define ISR_RX 0x00000010
+ #define ISR_PHY 0x00000020
+#define TXCFG (CMD_BASE + 0x0010)
+ #define AUTOPAD_CRC 0x00000050
+ #define DEFAULT_TXCFG AUTOPAD_CRC
+#define TXCMD (CMD_BASE + 0x0014)
+ #define TXCMD_TXDP_MASK 0x00006000
+ #define TXCMD_TXDP0 0x00000000
+ #define TXCMD_TXDP1 0x00002000
+ #define TXCMD_TXDP2 0x00004000
+ #define TXCMD_TXDP3 0x00006000
+ #define TX_START_WRITE 0x00008000
+ #define TX_STOP_WRITE 0x00000000
+ #define DEFAULT_TXCMD 0x00000000
+#define TXBS (CMD_BASE + 0x0018)
+ #define TXDP0_USED 0x00000001
+ #define TXDP1_USED 0x00000002
+ #define TXDP2_USED 0x00000004
+ #define TXDP3_USED 0x00000008
+ #define DEFAULT_TXBS 0x00000000
+#define TXDES0 (CMD_BASE + 0x0020)
+ #define TXDPx_ENABLE 0x00008000
+ #define TXDPx_LEN_MASK 0x00001FFF
+ #define DEFAULT_TXDES0 0x00000000
+#define TXDES1 (CMD_BASE + 0x0024)
+ #define TXDPx_ENABLE 0x00008000
+ #define TXDPx_LEN_MASK 0x00001FFF
+ #define DEFAULT_TXDES1 0x00000000
+#define TXDES2 (CMD_BASE + 0x0028)
+ #define TXDPx_ENABLE 0x00008000
+ #define TXDPx_LEN_MASK 0x00001FFF
+ #define DEFAULT_TXDES2 0x00000000
+#define TXDES3 (CMD_BASE + 0x002C)
+ #define TXDPx_ENABLE 0x00008000
+ #define TXDPx_LEN_MASK 0x00001FFF
+ #define DEFAULT_TXDES3 0x00000000
+#define RXCFG (CMD_BASE + 0x0030)
+ #define RXBUFF_PROTECT 0x00000001
+ #define RXTCPCRC_CHECK 0x00000010
+ #define RXFLOW_ENABLE 0x00000100
+ #define DEFAULT_RXCFG RXBUFF_PROTECT
+#define RXCURT (CMD_BASE + 0x0034)
+ #define DEFAULT_RXCURT 0x00000000
+#define RXBOUND (CMD_BASE + 0x0038)
+ #define DEFAULT_RXBOUND 0x7FF //RX pages 0~7FFh
+#define MACCFG0 (CMD_BASE + 0x0040)
+ #define MACCFG0_BIT3_0 0x00000007
+ #define IPGT_VAL 0x00000150
+ #define TXFLOW_ENABLE 0x00001000
+ #define SPEED100 0x00008000
+ #define DEFAULT_MACCFG0 (IPGT_VAL | MACCFG0_BIT3_0)
+#define MACCFG1 (CMD_BASE + 0x0044)
+ #define RGMII_EN 0x00000002
+ #define RXFLOW_EN 0x00000020
+ #define FULLDUPLEX 0x00000040
+ #define MAX_JUMBO_LEN 0x00000780
+ #define RXJUMBO_EN 0x00000800
+ #define GIGA_MODE_EN 0x00001000
+ #define RXCRC_CHECK 0x00002000
+ #define RXPAUSE_DA_CHECK 0x00004000
+
+ #define JUMBO_LEN_4K 0x00000200
+ #define JUMBO_LEN_15K 0x00000780
+ #define DEFAULT_MACCFG1 (RXCRC_CHECK | RXPAUSE_DA_CHECK | \
+ RGMII_EN)
+ #define CICADA_DEFAULT_MACCFG1 (RXCRC_CHECK | RXPAUSE_DA_CHECK)
+#define MACCFG2 (CMD_BASE + 0x0048)
+ #define MACCFG2_BIT15_8 0x00000100
+ #define JAM_LIMIT_MASK 0x000000FC
+ #define DEFAULT_JAM_LIMIT 0x00000064
+ #define DEFAULT_MACCFG2 MACCFG2_BIT15_8
+#define MACCFG3 (CMD_BASE + 0x004C)
+ #define IPGR2_VAL 0x0000000E
+ #define IPGR1_VAL 0x00000600
+ #define NOABORT 0x00008000
+ #define DEFAULT_MACCFG3 (IPGR1_VAL | IPGR2_VAL)
+#define TXPAUT (CMD_BASE + 0x0054)
+ #define DEFAULT_TXPAUT 0x001FE000
+#define RXBTHD0 (CMD_BASE + 0x0058)
+ #define DEFAULT_RXBTHD0 0x00000300
+#define RXBTHD1 (CMD_BASE + 0x005C)
+ #define DEFAULT_RXBTHD1 0x00000600
+#define RXFULTHD (CMD_BASE + 0x0060)
+ #define DEFAULT_RXFULTHD 0x00000100
+#define MISC (CMD_BASE + 0x0068)
+ /* Normal operation mode */
+ #define MISC_NORMAL 0x00000003
+ /* Clear bit 0 to reset MAC */
+ #define MISC_RESET_MAC 0x00000002
+ /* Clear bit 1 to reset PHY */
+ #define MISC_RESET_PHY 0x00000001
+ /* Clear bit 0 and 1 to reset MAC and PHY */
+ #define MISC_RESET_MAC_PHY 0x00000000
+ #define DEFAULT_MISC MISC_NORMAL
+#define MACID0 (CMD_BASE + 0x0070)
+#define MACID1 (CMD_BASE + 0x0074)
+#define MACID2 (CMD_BASE + 0x0078)
+#define TXLEN (CMD_BASE + 0x007C)
+ #define DEFAULT_TXLEN 0x000005FC
+#define RXFILTER (CMD_BASE + 0x0080)
+ #define RX_RXANY 0x00000001
+ #define RX_MULTICAST 0x00000002
+ #define RX_UNICAST 0x00000004
+ #define RX_BROADCAST 0x00000008
+ #define RX_MULTI_HASH 0x00000010
+ #define DISABLE_RXFILTER 0x00000000
+ #define DEFAULT_RXFILTER (RX_BROADCAST + RX_UNICAST)
+#define MDIOCTRL (CMD_BASE + 0x0084)
+ #define PHY_ADDR_MASK 0x0000001F
+ #define REG_ADDR_MASK 0x00001F00
+ #define READ_PHY 0x00004000
+ #define WRITE_PHY 0x00008000
+#define MDIODP (CMD_BASE + 0x0088)
+#define GPIOCTRL (CMD_BASE + 0x008C)
+#define RXINDICATOR (CMD_BASE + 0x0090)
+ #define RX_START_READ 0x00000001
+ #define RX_STOP_READ 0x00000000
+ #define DEFAULT_RXINDICATOR RX_STOP_READ
+#define TXST (CMD_BASE + 0x0094)
+#define MDCCLKPAT (CMD_BASE + 0x00A0)
+#define RXIPCRCCNT (CMD_BASE + 0x00A4)
+#define RXCRCCNT (CMD_BASE + 0x00A8)
+#define TXFAILCNT (CMD_BASE + 0x00AC)
+#define PROMDP (CMD_BASE + 0x00B0)
+#define PROMCTRL (CMD_BASE + 0x00B4)
+ #define RELOAD_EEPROM 0x00000200
+#define MAXRXLEN (CMD_BASE + 0x00B8)
+#define HASHTAB0 (CMD_BASE + 0x00C0)
+#define HASHTAB1 (CMD_BASE + 0x00C4)
+#define HASHTAB2 (CMD_BASE + 0x00C8)
+#define HASHTAB3 (CMD_BASE + 0x00CC)
+#define DOGTHD0 (CMD_BASE + 0x00E0)
+ #define DEFAULT_DOGTHD0 0x0000FFFF
+#define DOGTHD1 (CMD_BASE + 0x00E4)
+ #define START_WATCHDOG_TIMER 0x00008000
+ #define DEFAULT_DOGTHD1 0x00000FFF
+#define SOFTRST (CMD_BASE + 0x00EC)
+ #define SOFTRST_NORMAL 0x00000003
+ #define SOFTRST_RESET_MAC 0x00000002
+
+/* External PHY Register Definition */
+#define BMCR 0x0000
+ #define LINE_SPEED_MSB 0x0040
+ #define DUPLEX_MODE 0x0100
+ #define RESTART_AUTONEG 0x0200
+ #define POWER_DOWN 0x0800
+ #define AUTONEG_EN 0x1000
+ #define LINE_SPEED_LSB 0x2000
+ #define PHY_RESET 0x8000
+
+ #define MEDIAMODE_MASK (LINE_SPEED_MSB | LINE_SPEED_LSB |\
+ DUPLEX_MODE)
+ #define BMCR_SPEED_1000 LINE_SPEED_MSB
+ #define BMCR_SPEED_100 LINE_SPEED_LSB
+ #define BMCR_SPEED_10 0x0000
+
+ #define BMCR_1000FULL (BMCR_SPEED_1000 | DUPLEX_MODE)
+ #define BMCR_100FULL (BMCR_SPEED_100 | DUPLEX_MODE)
+ #define BMCR_100HALF BMCR_SPEED_100
+ #define BMCR_10FULL DUPLEX_MODE
+ #define BMCR_10HALF 0x0000
+#define BMSR 0x0001
+ #define LINKOK 0x0004
+ #define AUTONEG_ENABLE_STS 0x0008
+ #define AUTONEG_COMPLETE 0x0020
+#define PHYIDR0 0x0002
+#define PHYIDR1 0x0003
+#define ANAR 0x0004
+ #define ANAR_PAUSE 0x0400
+ #define ANAR_100FULL 0x0100
+ #define ANAR_100HALF 0x0080
+ #define ANAR_10FULL 0x0040
+ #define ANAR_10HALF 0x0020
+ #define ANAR_8023BIT 0x0001
+#define ANLPAR 0x0005
+#define ANER 0x0006
+#define AUX_1000_CTRL 0x0009
+ #define ENABLE_1000HALF 0x0100
+ #define ENABLE_1000FULL 0x0200
+ #define DEFAULT_AUX_1000_CTRL (ENABLE_1000HALF | ENABLE_1000FULL)
+#define AUX_1000_STATUS 0x000A
+ #define LP_1000HALF 0x0400
+ #define LP_1000FULL 0x0800
+
+/* Marvell 88E1111 Gigabit PHY Register Definition */
+#define M88_SSR 0x0011
+ #define SSR_SPEED_MASK 0xC000
+ #define SSR_SPEED_1000 0x8000
+ #define SSR_SPEED_100 0x4000
+ #define SSR_SPEED_10 0x0000
+ #define SSR_DUPLEX 0x2000
+ #define SSR_MEDIA_RESOLVED_OK 0x0800
+
+ #define SSR_MEDIA_MASK (SSR_SPEED_MASK | SSR_DUPLEX)
+ #define SSR_1000FULL (SSR_SPEED_1000 | SSR_DUPLEX)
+ #define SSR_1000HALF SSR_SPEED_1000
+ #define SSR_100FULL (SSR_SPEED_100 | SSR_DUPLEX)
+ #define SSR_100HALF SSR_SPEED_100
+ #define SSR_10FULL (SSR_SPEED_10 | SSR_DUPLEX)
+ #define SSR_10HALF SSR_SPEED_10
+#define M88_IER 0x0012
+ #define LINK_CHANGE_INT 0x0400
+#define M88_ISR 0x0013
+ #define LINK_CHANGE_STATUS 0x0400
+#define M88_EXT_SCR 0x0014
+ #define RGMII_RXCLK_DELAY 0x0080
+ #define RGMII_TXCLK_DELAY 0x0002
+ #define DEFAULT_EXT_SCR (RGMII_TXCLK_DELAY | RGMII_RXCLK_DELAY)
+#define M88_EXT_SSR 0x001B
+ #define HWCFG_MODE_MASK 0x000F
+ #define RGMII_COPPER_MODE 0x000B
+
+/* CICADA CIS8201 Gigabit PHY Register Definition */
+#define CIS_IMR 0x0019
+ #define CIS_INT_ENABLE 0x8000
+ #define CIS_LINK_CHANGE_INT 0x2000
+#define CIS_ISR 0x001A
+ #define CIS_INT_PENDING 0x8000
+ #define CIS_LINK_CHANGE_STATUS 0x2000
+#define CIS_AUX_CTRL_STATUS 0x001C
+ #define CIS_AUTONEG_COMPLETE 0x8000
+ #define CIS_SPEED_MASK 0x0018
+ #define CIS_SPEED_1000 0x0010
+ #define CIS_SPEED_100 0x0008
+ #define CIS_SPEED_10 0x0000
+ #define CIS_DUPLEX 0x0020
+
+ #define CIS_MEDIA_MASK (CIS_SPEED_MASK | CIS_DUPLEX)
+ #define CIS_1000FULL (CIS_SPEED_1000 | CIS_DUPLEX)
+ #define CIS_1000HALF CIS_SPEED_1000
+ #define CIS_100FULL (CIS_SPEED_100 | CIS_DUPLEX)
+ #define CIS_100HALF CIS_SPEED_100
+ #define CIS_10FULL (CIS_SPEED_10 | CIS_DUPLEX)
+ #define CIS_10HALF CIS_SPEED_10
+ #define CIS_SMI_PRIORITY 0x0004
+
+static inline unsigned short INW (struct eth_device *dev, unsigned long addr)
+{
+ return le16_to_cpu (*(volatile unsigned short *) (addr + dev->iobase));
+}
+
+static inline void OUTW (struct eth_device *dev, unsigned short command, unsigned long addr)
+{
+ *(volatile unsigned short *) ((addr + dev->iobase)) = cpu_to_le16 (command);
+}
+
+/*
+ Access RXBUFFER_START/TXBUFFER_START to read RX buffer/write TX buffer
+*/
+#if defined (CONFIG_DRIVER_AX88180_16BIT)
+static inline unsigned short READ_RXBUF (struct eth_device *dev)
+{
+ return le16_to_cpu (*(volatile unsigned short *) (RXBUFFER_START + dev->iobase));
+}
+
+static inline void WRITE_TXBUF (struct eth_device *dev, unsigned short data)
+{
+ *(volatile unsigned short *) ((TXBUFFER_START + dev->iobase)) = cpu_to_le16 (data);
+}
+#else
+static inline unsigned long READ_RXBUF (struct eth_device *dev)
+{
+ return le32_to_cpu (*(volatile unsigned long *) (RXBUFFER_START + dev->iobase));
+}
+
+static inline void WRITE_TXBUF (struct eth_device *dev, unsigned long data)
+{
+ *(volatile unsigned long *) ((TXBUFFER_START + dev->iobase)) = cpu_to_le32 (data);
+}
+#endif
+
+#endif /* _AX88180_H_ */
diff --git a/drivers/net/ax88796.c b/drivers/net/ax88796.c
index 39cd101..2089141 100644
--- a/drivers/net/ax88796.c
+++ b/drivers/net/ax88796.c
@@ -143,7 +143,7 @@ static void ax88796_mac_read(u8 *buff)
}
}
-int get_prom(u8* mac_addr)
+int get_prom(u8* mac_addr, u8* base_addr)
{
u8 prom[32];
int i;
diff --git a/drivers/net/ne2000.c b/drivers/net/ne2000.c
index ec92485..ab5eec7 100644
--- a/drivers/net/ne2000.c
+++ b/drivers/net/ne2000.c
@@ -74,600 +74,11 @@ Add SNMP
#include <common.h>
#include <command.h>
-#include <net.h>
-#include <malloc.h>
-
-#define mdelay(n) udelay((n)*1000)
-/* forward definition of function used for the uboot interface */
-void uboot_push_packet_len(int len);
-void uboot_push_tx_done(int key, int val);
-
-/*
- * Debugging details
- *
- * Set to perms of:
- * 0 disables all debug output
- * 1 for process debug output
- * 2 for added data IO output: get_reg, put_reg
- * 4 for packet allocation/free output
- * 8 for only startup status, so we can tell we're installed OK
- */
-#if 0
-#define DEBUG 0xf
-#else
-#define DEBUG 0
-#endif
-
-#if DEBUG & 1
-#define DEBUG_FUNCTION() do { printf("%s\n", __FUNCTION__); } while (0)
-#define DEBUG_LINE() do { printf("%d\n", __LINE__); } while (0)
-#define PRINTK(args...) printf(args)
-#else
-#define DEBUG_FUNCTION() do {} while(0)
-#define DEBUG_LINE() do {} while(0)
-#define PRINTK(args...)
-#endif
/* NE2000 base header file */
#include "ne2000_base.h"
-#if defined(CONFIG_DRIVER_AX88796L)
-/* AX88796L support */
-#include "ax88796.h"
-#else
-/* Basic NE2000 chip support */
-#include "ne2000.h"
-#endif
-
-static dp83902a_priv_data_t nic; /* just one instance of the card supported */
-
-static bool
-dp83902a_init(void)
-{
- dp83902a_priv_data_t *dp = &nic;
- u8* base;
-#if defined(NE2000_BASIC_INIT)
- int i;
-#endif
-
- DEBUG_FUNCTION();
-
- base = dp->base;
- if (!base)
- return false; /* No device found */
-
- DEBUG_LINE();
-
-#if defined(NE2000_BASIC_INIT)
- /* AX88796L doesn't need */
- /* Prepare ESA */
- DP_OUT(base, DP_CR, DP_CR_NODMA | DP_CR_PAGE1); /* Select page 1 */
- /* Use the address from the serial EEPROM */
- for (i = 0; i < 6; i++)
- DP_IN(base, DP_P1_PAR0+i, dp->esa[i]);
- DP_OUT(base, DP_CR, DP_CR_NODMA | DP_CR_PAGE0); /* Select page 0 */
-
- printf("NE2000 - %s ESA: %02x:%02x:%02x:%02x:%02x:%02x\n",
- "eeprom",
- dp->esa[0],
- dp->esa[1],
- dp->esa[2],
- dp->esa[3],
- dp->esa[4],
- dp->esa[5] );
-
-#endif /* NE2000_BASIC_INIT */
- return true;
-}
-
-static void
-dp83902a_stop(void)
-{
- dp83902a_priv_data_t *dp = &nic;
- u8 *base = dp->base;
-
- DEBUG_FUNCTION();
-
- DP_OUT(base, DP_CR, DP_CR_PAGE0 | DP_CR_NODMA | DP_CR_STOP); /* Brutal */
- DP_OUT(base, DP_ISR, 0xFF); /* Clear any pending interrupts */
- DP_OUT(base, DP_IMR, 0x00); /* Disable all interrupts */
-
- dp->running = false;
-}
-
-/*
- * This function is called to "start up" the interface. It may be called
- * multiple times, even when the hardware is already running. It will be
- * called whenever something "hardware oriented" changes and should leave
- * the hardware ready to send/receive packets.
- */
-static void
-dp83902a_start(u8 * enaddr)
-{
- dp83902a_priv_data_t *dp = &nic;
- u8 *base = dp->base;
- int i;
-
- DEBUG_FUNCTION();
-
- DP_OUT(base, DP_CR, DP_CR_PAGE0 | DP_CR_NODMA | DP_CR_STOP); /* Brutal */
- DP_OUT(base, DP_DCR, DP_DCR_INIT);
- DP_OUT(base, DP_RBCH, 0); /* Remote byte count */
- DP_OUT(base, DP_RBCL, 0);
- DP_OUT(base, DP_RCR, DP_RCR_MON); /* Accept no packets */
- DP_OUT(base, DP_TCR, DP_TCR_LOCAL); /* Transmitter [virtually] off */
- DP_OUT(base, DP_TPSR, dp->tx_buf1); /* Transmitter start page */
- dp->tx1 = dp->tx2 = 0;
- dp->tx_next = dp->tx_buf1;
- dp->tx_started = false;
- dp->running = true;
- DP_OUT(base, DP_PSTART, dp->rx_buf_start); /* Receive ring start page */
- DP_OUT(base, DP_BNDRY, dp->rx_buf_end - 1); /* Receive ring boundary */
- DP_OUT(base, DP_PSTOP, dp->rx_buf_end); /* Receive ring end page */
- dp->rx_next = dp->rx_buf_start - 1;
- dp->running = true;
- DP_OUT(base, DP_ISR, 0xFF); /* Clear any pending interrupts */
- DP_OUT(base, DP_IMR, DP_IMR_All); /* Enable all interrupts */
- DP_OUT(base, DP_CR, DP_CR_NODMA | DP_CR_PAGE1 | DP_CR_STOP); /* Select page 1 */
- DP_OUT(base, DP_P1_CURP, dp->rx_buf_start); /* Current page - next free page for Rx */
- dp->running = true;
- for (i = 0; i < ETHER_ADDR_LEN; i++) {
- /* FIXME */
- /*((vu_short*)( base + ((DP_P1_PAR0 + i) * 2) +
- * 0x1400)) = enaddr[i];*/
- DP_OUT(base, DP_P1_PAR0+i, enaddr[i]);
- }
- /* Enable and start device */
- DP_OUT(base, DP_CR, DP_CR_PAGE0 | DP_CR_NODMA | DP_CR_START);
- DP_OUT(base, DP_TCR, DP_TCR_NORMAL); /* Normal transmit operations */
- DP_OUT(base, DP_RCR, DP_RCR_AB); /* Accept broadcast, no errors, no multicast */
- dp->running = true;
-}
-
-/*
- * This routine is called to start the transmitter. It is split out from the
- * data handling routine so it may be called either when data becomes first
- * available or when an Tx interrupt occurs
- */
-
-static void
-dp83902a_start_xmit(int start_page, int len)
-{
- dp83902a_priv_data_t *dp = (dp83902a_priv_data_t *) &nic;
- u8 *base = dp->base;
-
- DEBUG_FUNCTION();
-
-#if DEBUG & 1
- printf("Tx pkt %d len %d\n", start_page, len);
- if (dp->tx_started)
- printf("TX already started?!?\n");
-#endif
-
- DP_OUT(base, DP_ISR, (DP_ISR_TxP | DP_ISR_TxE));
- DP_OUT(base, DP_CR, DP_CR_PAGE0 | DP_CR_NODMA | DP_CR_START);
- DP_OUT(base, DP_TBCL, len & 0xFF);
- DP_OUT(base, DP_TBCH, len >> 8);
- DP_OUT(base, DP_TPSR, start_page);
- DP_OUT(base, DP_CR, DP_CR_NODMA | DP_CR_TXPKT | DP_CR_START);
-
- dp->tx_started = true;
-}
-
-/*
- * This routine is called to send data to the hardware. It is known a-priori
- * that there is free buffer space (dp->tx_next).
- */
-static void
-dp83902a_send(u8 *data, int total_len, u32 key)
-{
- struct dp83902a_priv_data *dp = (struct dp83902a_priv_data *) &nic;
- u8 *base = dp->base;
- int len, start_page, pkt_len, i, isr;
-#if DEBUG & 4
- int dx;
-#endif
-
- DEBUG_FUNCTION();
-
- len = pkt_len = total_len;
- if (pkt_len < IEEE_8023_MIN_FRAME)
- pkt_len = IEEE_8023_MIN_FRAME;
-
- start_page = dp->tx_next;
- if (dp->tx_next == dp->tx_buf1) {
- dp->tx1 = start_page;
- dp->tx1_len = pkt_len;
- dp->tx1_key = key;
- dp->tx_next = dp->tx_buf2;
- } else {
- dp->tx2 = start_page;
- dp->tx2_len = pkt_len;
- dp->tx2_key = key;
- dp->tx_next = dp->tx_buf1;
- }
-
-#if DEBUG & 5
- printf("TX prep page %d len %d\n", start_page, pkt_len);
-#endif
-
- DP_OUT(base, DP_ISR, DP_ISR_RDC); /* Clear end of DMA */
- {
- /*
- * Dummy read. The manual sez something slightly different,
- * but the code is extended a bit to do what Hitachi's monitor
- * does (i.e., also read data).
- */
-
- u16 tmp;
- int len = 1;
-
- DP_OUT(base, DP_RSAL, 0x100 - len);
- DP_OUT(base, DP_RSAH, (start_page - 1) & 0xff);
- DP_OUT(base, DP_RBCL, len);
- DP_OUT(base, DP_RBCH, 0);
- DP_OUT(base, DP_CR, DP_CR_PAGE0 | DP_CR_RDMA | DP_CR_START);
- DP_IN_DATA(dp->data, tmp);
- }
-
-#ifdef CYGHWR_NS_DP83902A_PLF_BROKEN_TX_DMA
- /*
- * Stall for a bit before continuing to work around random data
- * corruption problems on some platforms.
- */
- CYGACC_CALL_IF_DELAY_US(1);
-#endif
-
- /* Send data to device buffer(s) */
- DP_OUT(base, DP_RSAL, 0);
- DP_OUT(base, DP_RSAH, start_page);
- DP_OUT(base, DP_RBCL, pkt_len & 0xFF);
- DP_OUT(base, DP_RBCH, pkt_len >> 8);
- DP_OUT(base, DP_CR, DP_CR_WDMA | DP_CR_START);
-
- /* Put data into buffer */
-#if DEBUG & 4
- printf(" sg buf %08lx len %08x\n ", (u32)data, len);
- dx = 0;
-#endif
- while (len > 0) {
-#if DEBUG & 4
- printf(" %02x", *data);
- if (0 == (++dx % 16)) printf("\n ");
-#endif
-
- DP_OUT_DATA(dp->data, *data++);
- len--;
- }
-#if DEBUG & 4
- printf("\n");
-#endif
- if (total_len < pkt_len) {
-#if DEBUG & 4
- printf(" + %d bytes of padding\n", pkt_len - total_len);
-#endif
- /* Padding to 802.3 length was required */
- for (i = total_len; i < pkt_len;) {
- i++;
- DP_OUT_DATA(dp->data, 0);
- }
- }
-
-#ifdef CYGHWR_NS_DP83902A_PLF_BROKEN_TX_DMA
- /*
- * After last data write, delay for a bit before accessing the
- * device again, or we may get random data corruption in the last
- * datum (on some platforms).
- */
- CYGACC_CALL_IF_DELAY_US(1);
-#endif
-
- /* Wait for DMA to complete */
- do {
- DP_IN(base, DP_ISR, isr);
- } while ((isr & DP_ISR_RDC) == 0);
-
- /* Then disable DMA */
- DP_OUT(base, DP_CR, DP_CR_PAGE0 | DP_CR_NODMA | DP_CR_START);
-
- /* Start transmit if not already going */
- if (!dp->tx_started) {
- if (start_page == dp->tx1) {
- dp->tx_int = 1; /* Expecting interrupt from BUF1 */
- } else {
- dp->tx_int = 2; /* Expecting interrupt from BUF2 */
- }
- dp83902a_start_xmit(start_page, pkt_len);
- }
-}
-
-/*
- * This function is called when a packet has been received. It's job is
- * to prepare to unload the packet from the hardware. Once the length of
- * the packet is known, the upper layer of the driver can be told. When
- * the upper layer is ready to unload the packet, the internal function
- * 'dp83902a_recv' will be called to actually fetch it from the hardware.
- */
-static void
-dp83902a_RxEvent(void)
-{
- struct dp83902a_priv_data *dp = (struct dp83902a_priv_data *) &nic;
- u8 *base = dp->base;
- u8 rsr;
- u8 rcv_hdr[4];
- int i, len, pkt, cur;
-
- DEBUG_FUNCTION();
-
- DP_IN(base, DP_RSR, rsr);
- while (true) {
- /* Read incoming packet header */
- DP_OUT(base, DP_CR, DP_CR_PAGE1 | DP_CR_NODMA | DP_CR_START);
- DP_IN(base, DP_P1_CURP, cur);
- DP_OUT(base, DP_P1_CR, DP_CR_PAGE0 | DP_CR_NODMA | DP_CR_START);
- DP_IN(base, DP_BNDRY, pkt);
-
- pkt += 1;
- if (pkt == dp->rx_buf_end)
- pkt = dp->rx_buf_start;
-
- if (pkt == cur) {
- break;
- }
- DP_OUT(base, DP_RBCL, sizeof(rcv_hdr));
- DP_OUT(base, DP_RBCH, 0);
- DP_OUT(base, DP_RSAL, 0);
- DP_OUT(base, DP_RSAH, pkt);
- if (dp->rx_next == pkt) {
- if (cur == dp->rx_buf_start)
- DP_OUT(base, DP_BNDRY, dp->rx_buf_end - 1);
- else
- DP_OUT(base, DP_BNDRY, cur - 1); /* Update pointer */
- return;
- }
- dp->rx_next = pkt;
- DP_OUT(base, DP_ISR, DP_ISR_RDC); /* Clear end of DMA */
- DP_OUT(base, DP_CR, DP_CR_RDMA | DP_CR_START);
-#ifdef CYGHWR_NS_DP83902A_PLF_BROKEN_RX_DMA
- CYGACC_CALL_IF_DELAY_US(10);
-#endif
-
- /* read header (get data size)*/
- for (i = 0; i < sizeof(rcv_hdr);) {
- DP_IN_DATA(dp->data, rcv_hdr[i++]);
- }
-
-#if DEBUG & 5
- printf("rx hdr %02x %02x %02x %02x\n",
- rcv_hdr[0], rcv_hdr[1], rcv_hdr[2], rcv_hdr[3]);
-#endif
- len = ((rcv_hdr[3] << 8) | rcv_hdr[2]) - sizeof(rcv_hdr);
-
- /* data read */
- uboot_push_packet_len(len);
-
- if (rcv_hdr[1] == dp->rx_buf_start)
- DP_OUT(base, DP_BNDRY, dp->rx_buf_end - 1);
- else
- DP_OUT(base, DP_BNDRY, rcv_hdr[1] - 1); /* Update pointer */
- }
-}
-
-/*
- * This function is called as a result of the "eth_drv_recv()" call above.
- * It's job is to actually fetch data for a packet from the hardware once
- * memory buffers have been allocated for the packet. Note that the buffers
- * may come in pieces, using a scatter-gather list. This allows for more
- * efficient processing in the upper layers of the stack.
- */
-static void
-dp83902a_recv(u8 *data, int len)
-{
- struct dp83902a_priv_data *dp = (struct dp83902a_priv_data *) &nic;
- u8 *base = dp->base;
- int i, mlen;
- u8 saved_char = 0;
- bool saved;
-#if DEBUG & 4
- int dx;
-#endif
-
- DEBUG_FUNCTION();
-
-#if DEBUG & 5
- printf("Rx packet %d length %d\n", dp->rx_next, len);
-#endif
-
- /* Read incoming packet data */
- DP_OUT(base, DP_CR, DP_CR_PAGE0 | DP_CR_NODMA | DP_CR_START);
- DP_OUT(base, DP_RBCL, len & 0xFF);
- DP_OUT(base, DP_RBCH, len >> 8);
- DP_OUT(base, DP_RSAL, 4); /* Past header */
- DP_OUT(base, DP_RSAH, dp->rx_next);
- DP_OUT(base, DP_ISR, DP_ISR_RDC); /* Clear end of DMA */
- DP_OUT(base, DP_CR, DP_CR_RDMA | DP_CR_START);
-#ifdef CYGHWR_NS_DP83902A_PLF_BROKEN_RX_DMA
- CYGACC_CALL_IF_DELAY_US(10);
-#endif
-
- saved = false;
- for (i = 0; i < 1; i++) {
- if (data) {
- mlen = len;
-#if DEBUG & 4
- printf(" sg buf %08lx len %08x \n", (u32) data, mlen);
- dx = 0;
-#endif
- while (0 < mlen) {
- /* Saved byte from previous loop? */
- if (saved) {
- *data++ = saved_char;
- mlen--;
- saved = false;
- continue;
- }
-
- {
- u8 tmp;
- DP_IN_DATA(dp->data, tmp);
-#if DEBUG & 4
- printf(" %02x", tmp);
- if (0 == (++dx % 16)) printf("\n ");
-#endif
- *data++ = tmp;;
- mlen--;
- }
- }
-#if DEBUG & 4
- printf("\n");
-#endif
- }
- }
-}
-
-static void
-dp83902a_TxEvent(void)
-{
- struct dp83902a_priv_data *dp = (struct dp83902a_priv_data *) &nic;
- u8 *base = dp->base;
- u8 tsr;
- u32 key;
-
- DEBUG_FUNCTION();
-
- DP_IN(base, DP_TSR, tsr);
- if (dp->tx_int == 1) {
- key = dp->tx1_key;
- dp->tx1 = 0;
- } else {
- key = dp->tx2_key;
- dp->tx2 = 0;
- }
- /* Start next packet if one is ready */
- dp->tx_started = false;
- if (dp->tx1) {
- dp83902a_start_xmit(dp->tx1, dp->tx1_len);
- dp->tx_int = 1;
- } else if (dp->tx2) {
- dp83902a_start_xmit(dp->tx2, dp->tx2_len);
- dp->tx_int = 2;
- } else {
- dp->tx_int = 0;
- }
- /* Tell higher level we sent this packet */
- uboot_push_tx_done(key, 0);
-}
-
-/*
- * Read the tally counters to clear them. Called in response to a CNT
- * interrupt.
- */
-static void
-dp83902a_ClearCounters(void)
-{
- struct dp83902a_priv_data *dp = (struct dp83902a_priv_data *) &nic;
- u8 *base = dp->base;
- u8 cnt1, cnt2, cnt3;
-
- DP_IN(base, DP_FER, cnt1);
- DP_IN(base, DP_CER, cnt2);
- DP_IN(base, DP_MISSED, cnt3);
- DP_OUT(base, DP_ISR, DP_ISR_CNT);
-}
-
-/*
- * Deal with an overflow condition. This code follows the procedure set
- * out in section 7.0 of the datasheet.
- */
-static void
-dp83902a_Overflow(void)
-{
- struct dp83902a_priv_data *dp = (struct dp83902a_priv_data *)&nic;
- u8 *base = dp->base;
- u8 isr;
-
- /* Issue a stop command and wait 1.6ms for it to complete. */
- DP_OUT(base, DP_CR, DP_CR_STOP | DP_CR_NODMA);
- CYGACC_CALL_IF_DELAY_US(1600);
-
- /* Clear the remote byte counter registers. */
- DP_OUT(base, DP_RBCL, 0);
- DP_OUT(base, DP_RBCH, 0);
-
- /* Enter loopback mode while we clear the buffer. */
- DP_OUT(base, DP_TCR, DP_TCR_LOCAL);
- DP_OUT(base, DP_CR, DP_CR_START | DP_CR_NODMA);
-
- /*
- * Read in as many packets as we can and acknowledge any and receive
- * interrupts. Since the buffer has overflowed, a receive event of
- * some kind will have occured.
- */
- dp83902a_RxEvent();
- DP_OUT(base, DP_ISR, DP_ISR_RxP|DP_ISR_RxE);
-
- /* Clear the overflow condition and leave loopback mode. */
- DP_OUT(base, DP_ISR, DP_ISR_OFLW);
- DP_OUT(base, DP_TCR, DP_TCR_NORMAL);
-
- /*
- * If a transmit command was issued, but no transmit event has occured,
- * restart it here.
- */
- DP_IN(base, DP_ISR, isr);
- if (dp->tx_started && !(isr & (DP_ISR_TxP|DP_ISR_TxE))) {
- DP_OUT(base, DP_CR, DP_CR_NODMA | DP_CR_TXPKT | DP_CR_START);
- }
-}
-
-static void
-dp83902a_poll(void)
-{
- struct dp83902a_priv_data *dp = (struct dp83902a_priv_data *) &nic;
- u8 *base = dp->base;
- u8 isr;
-
- DP_OUT(base, DP_CR, DP_CR_NODMA | DP_CR_PAGE0 | DP_CR_START);
- DP_IN(base, DP_ISR, isr);
- while (0 != isr) {
- /*
- * The CNT interrupt triggers when the MSB of one of the error
- * counters is set. We don't much care about these counters, but
- * we should read their values to reset them.
- */
- if (isr & DP_ISR_CNT) {
- dp83902a_ClearCounters();
- }
- /*
- * Check for overflow. It's a special case, since there's a
- * particular procedure that must be followed to get back into
- * a running state.a
- */
- if (isr & DP_ISR_OFLW) {
- dp83902a_Overflow();
- } else {
- /*
- * Other kinds of interrupts can be acknowledged simply by
- * clearing the relevant bits of the ISR. Do that now, then
- * handle the interrupts we care about.
- */
- DP_OUT(base, DP_ISR, isr); /* Clear set bits */
- if (!dp->running) break; /* Is this necessary? */
- /*
- * Check for tx_started on TX event since these may happen
- * spuriously it seems.
- */
- if (isr & (DP_ISR_TxP|DP_ISR_TxE) && dp->tx_started) {
- dp83902a_TxEvent();
- }
- if (isr & (DP_ISR_RxP|DP_ISR_RxE)) {
- dp83902a_RxEvent();
- }
- }
- DP_IN(base, DP_ISR, isr);
- }
-}
-
+#define mdelay(n) udelay((n)*1000)
/* find prom (taken from pc_net_cs.c from Linux) */
#include "8390.h"
@@ -763,18 +174,16 @@ static hw_info_t hw_info[] = {
#define PCNET_RESET 0x1f /* Issue a read to reset, a write to clear. */
#define PCNET_MISC 0x18 /* For IBM CCAE and Socket EA cards */
-static void pcnet_reset_8390(void)
+static void pcnet_reset_8390(u8* addr)
{
int i, r;
- PRINTK("nic base is %lx\n", nic.base);
-
n2k_outb(E8390_NODMA + E8390_PAGE0+E8390_STOP, E8390_CMD);
- PRINTK("cmd (at %lx) is %x\n", nic.base + E8390_CMD, n2k_inb(E8390_CMD));
+ PRINTK("cmd (at %lx) is %x\n", addr + E8390_CMD, n2k_inb(E8390_CMD));
n2k_outb(E8390_NODMA+E8390_PAGE1+E8390_STOP, E8390_CMD);
- PRINTK("cmd (at %lx) is %x\n", nic.base + E8390_CMD, n2k_inb(E8390_CMD));
+ PRINTK("cmd (at %lx) is %x\n", addr + E8390_CMD, n2k_inb(E8390_CMD));
n2k_outb(E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD);
- PRINTK("cmd (at %lx) is %x\n", nic.base + E8390_CMD, n2k_inb(E8390_CMD));
+ PRINTK("cmd (at %lx) is %x\n", addr + E8390_CMD, n2k_inb(E8390_CMD));
n2k_outb(E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD);
n2k_outb(n2k_inb(PCNET_RESET), PCNET_RESET);
@@ -791,8 +200,7 @@ static void pcnet_reset_8390(void)
printf("pcnet_reset_8390() did not complete.\n");
} /* pcnet_reset_8390 */
-int get_prom(u8* mac_addr) __attribute__ ((weak, alias ("__get_prom")));
-int __get_prom(u8* mac_addr)
+int get_prom(u8* mac_addr, u8* base_addr)
{
u8 prom[32];
int i, j;
@@ -816,7 +224,7 @@ int __get_prom(u8* mac_addr)
PRINTK ("trying to get MAC via prom reading\n");
- pcnet_reset_8390 ();
+ pcnet_reset_8390 (base_addr);
mdelay (10);
@@ -849,116 +257,3 @@ int __get_prom(u8* mac_addr)
}
return 0;
}
-
-/* U-boot specific routines */
-static u8 *pbuf = NULL;
-
-static int pkey = -1;
-static int initialized = 0;
-
-void uboot_push_packet_len(int len) {
- PRINTK("pushed len = %d\n", len);
- if (len >= 2000) {
- printf("NE2000: packet too big\n");
- return;
- }
- dp83902a_recv(&pbuf[0], len);
-
- /*Just pass it to the upper layer*/
- NetReceive(&pbuf[0], len);
-}
-
-void uboot_push_tx_done(int key, int val) {
- PRINTK("pushed key = %d\n", key);
- pkey = key;
-}
-
-int eth_init(bd_t *bd) {
- int r;
- u8 dev_addr[6];
- char ethaddr[20];
-
- PRINTK("### eth_init\n");
-
- if (!pbuf) {
- pbuf = malloc(2000);
- if (!pbuf) {
- printf("Cannot allocate rx buffer\n");
- return -1;
- }
- }
-
-#ifdef CONFIG_DRIVER_NE2000_CCR
- {
- vu_char *p = (vu_char *) CONFIG_DRIVER_NE2000_CCR;
-
- PRINTK("CCR before is %x\n", *p);
- *p = CONFIG_DRIVER_NE2000_VAL;
- PRINTK("CCR after is %x\n", *p);
- }
-#endif
-
- nic.base = (u8 *) CONFIG_DRIVER_NE2000_BASE;
-
- r = get_prom(dev_addr);
- if (!r)
- return -1;
-
- sprintf (ethaddr, "%02X:%02X:%02X:%02X:%02X:%02X",
- dev_addr[0], dev_addr[1],
- dev_addr[2], dev_addr[3],
- dev_addr[4], dev_addr[5]) ;
- PRINTK("Set environment from HW MAC addr = \"%s\"\n", ethaddr);
- setenv ("ethaddr", ethaddr);
-
- nic.data = nic.base + DP_DATA;
- nic.tx_buf1 = START_PG;
- nic.tx_buf2 = START_PG2;
- nic.rx_buf_start = RX_START;
- nic.rx_buf_end = RX_END;
-
- if (dp83902a_init() == false)
- return -1;
-
- dp83902a_start(dev_addr);
- initialized = 1;
-
- return 0;
-}
-
-void eth_halt() {
-
- PRINTK("### eth_halt\n");
- if(initialized)
- dp83902a_stop();
- initialized = 0;
-}
-
-int eth_rx() {
- dp83902a_poll();
- return 1;
-}
-
-int eth_send(volatile void *packet, int length) {
- int tmo;
-
- PRINTK("### eth_send\n");
-
- pkey = -1;
-
- dp83902a_send((u8 *) packet, length, 666);
- tmo = get_timer (0) + TOUT * CFG_HZ;
- while(1) {
- dp83902a_poll();
- if (pkey != -1) {
- PRINTK("Packet sucesfully sent\n");
- return 0;
- }
- if (get_timer (0) >= tmo) {
- printf("transmission error (timoeut)\n");
- return 0;
- }
-
- }
- return 0;
-}
diff --git a/drivers/net/ne2000_base.c b/drivers/net/ne2000_base.c
new file mode 100644
index 0000000..4a07708
--- /dev/null
+++ b/drivers/net/ne2000_base.c
@@ -0,0 +1,757 @@
+/*
+Ported to U-Boot by Christian Pellegrin <chri@ascensit.com>
+
+Based on sources from the Linux kernel (pcnet_cs.c, 8390.h) and
+eCOS(if_dp83902a.c, if_dp83902a.h). Both of these 2 wonderful world
+are GPL, so this is, of course, GPL.
+
+==========================================================================
+
+dev/if_dp83902a.c
+
+Ethernet device driver for NS DP83902a ethernet controller
+
+==========================================================================
+####ECOSGPLCOPYRIGHTBEGIN####
+-------------------------------------------
+This file is part of eCos, the Embedded Configurable Operating System.
+Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
+
+eCos is free software; you can redistribute it and/or modify it under
+the terms of the GNU General Public License as published by the Free
+Software Foundation; either version 2 or (at your option) any later version.
+
+eCos is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or
+FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+for more details.
+
+You should have received a copy of the GNU General Public License along
+with eCos; if not, write to the Free Software Foundation, Inc.,
+59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+
+As a special exception, if other files instantiate templates or use macros
+or inline functions from this file, or you compile this file and link it
+with other works to produce a work based on this file, this file does not
+by itself cause the resulting work to be covered by the GNU General Public
+License. However the source code for this file must still be made available
+in accordance with section (3) of the GNU General Public License.
+
+This exception does not invalidate any other reasons why a work based on
+this file might be covered by the GNU General Public License.
+
+Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
+at http://sources.redhat.com/ecos/ecos-license/
+-------------------------------------------
+####ECOSGPLCOPYRIGHTEND####
+####BSDCOPYRIGHTBEGIN####
+
+-------------------------------------------
+
+Portions of this software may have been derived from OpenBSD or other sources,
+and are covered by the appropriate copyright disclaimers included herein.
+
+-------------------------------------------
+
+####BSDCOPYRIGHTEND####
+==========================================================================
+#####DESCRIPTIONBEGIN####
+
+Author(s): gthomas
+Contributors: gthomas, jskov, rsandifo
+Date: 2001-06-13
+Purpose:
+Description:
+
+FIXME: Will fail if pinged with large packets (1520 bytes)
+Add promisc config
+Add SNMP
+
+####DESCRIPTIONEND####
+
+==========================================================================
+*/
+
+#include <common.h>
+#include <command.h>
+#include <net.h>
+#include <malloc.h>
+
+#define mdelay(n) udelay((n)*1000)
+/* forward definition of function used for the uboot interface */
+void uboot_push_packet_len(int len);
+void uboot_push_tx_done(int key, int val);
+
+/* NE2000 base header file */
+#include "ne2000_base.h"
+
+#if defined(CONFIG_DRIVER_AX88796L)
+/* AX88796L support */
+#include "ax88796.h"
+#else
+/* Basic NE2000 chip support */
+#include "ne2000.h"
+#endif
+
+static dp83902a_priv_data_t nic; /* just one instance of the card supported */
+
+static bool
+dp83902a_init(void)
+{
+ dp83902a_priv_data_t *dp = &nic;
+ u8* base;
+#if defined(NE2000_BASIC_INIT)
+ int i;
+#endif
+
+ DEBUG_FUNCTION();
+
+ base = dp->base;
+ if (!base)
+ return false; /* No device found */
+
+ DEBUG_LINE();
+
+#if defined(NE2000_BASIC_INIT)
+ /* AX88796L doesn't need */
+ /* Prepare ESA */
+ DP_OUT(base, DP_CR, DP_CR_NODMA | DP_CR_PAGE1); /* Select page 1 */
+ /* Use the address from the serial EEPROM */
+ for (i = 0; i < 6; i++)
+ DP_IN(base, DP_P1_PAR0+i, dp->esa[i]);
+ DP_OUT(base, DP_CR, DP_CR_NODMA | DP_CR_PAGE0); /* Select page 0 */
+
+ printf("NE2000 - %s ESA: %02x:%02x:%02x:%02x:%02x:%02x\n",
+ "eeprom",
+ dp->esa[0],
+ dp->esa[1],
+ dp->esa[2],
+ dp->esa[3],
+ dp->esa[4],
+ dp->esa[5] );
+
+#endif /* NE2000_BASIC_INIT */
+ return true;
+}
+
+static void
+dp83902a_stop(void)
+{
+ dp83902a_priv_data_t *dp = &nic;
+ u8 *base = dp->base;
+
+ DEBUG_FUNCTION();
+
+ DP_OUT(base, DP_CR, DP_CR_PAGE0 | DP_CR_NODMA | DP_CR_STOP); /* Brutal */
+ DP_OUT(base, DP_ISR, 0xFF); /* Clear any pending interrupts */
+ DP_OUT(base, DP_IMR, 0x00); /* Disable all interrupts */
+
+ dp->running = false;
+}
+
+/*
+ * This function is called to "start up" the interface. It may be called
+ * multiple times, even when the hardware is already running. It will be
+ * called whenever something "hardware oriented" changes and should leave
+ * the hardware ready to send/receive packets.
+ */
+static void
+dp83902a_start(u8 * enaddr)
+{
+ dp83902a_priv_data_t *dp = &nic;
+ u8 *base = dp->base;
+ int i;
+
+ DEBUG_FUNCTION();
+
+ DP_OUT(base, DP_CR, DP_CR_PAGE0 | DP_CR_NODMA | DP_CR_STOP); /* Brutal */
+ DP_OUT(base, DP_DCR, DP_DCR_INIT);
+ DP_OUT(base, DP_RBCH, 0); /* Remote byte count */
+ DP_OUT(base, DP_RBCL, 0);
+ DP_OUT(base, DP_RCR, DP_RCR_MON); /* Accept no packets */
+ DP_OUT(base, DP_TCR, DP_TCR_LOCAL); /* Transmitter [virtually] off */
+ DP_OUT(base, DP_TPSR, dp->tx_buf1); /* Transmitter start page */
+ dp->tx1 = dp->tx2 = 0;
+ dp->tx_next = dp->tx_buf1;
+ dp->tx_started = false;
+ dp->running = true;
+ DP_OUT(base, DP_PSTART, dp->rx_buf_start); /* Receive ring start page */
+ DP_OUT(base, DP_BNDRY, dp->rx_buf_end - 1); /* Receive ring boundary */
+ DP_OUT(base, DP_PSTOP, dp->rx_buf_end); /* Receive ring end page */
+ dp->rx_next = dp->rx_buf_start - 1;
+ dp->running = true;
+ DP_OUT(base, DP_ISR, 0xFF); /* Clear any pending interrupts */
+ DP_OUT(base, DP_IMR, DP_IMR_All); /* Enable all interrupts */
+ DP_OUT(base, DP_CR, DP_CR_NODMA | DP_CR_PAGE1 | DP_CR_STOP); /* Select page 1 */
+ DP_OUT(base, DP_P1_CURP, dp->rx_buf_start); /* Current page - next free page for Rx */
+ dp->running = true;
+ for (i = 0; i < ETHER_ADDR_LEN; i++) {
+ /* FIXME */
+ /*((vu_short*)( base + ((DP_P1_PAR0 + i) * 2) +
+ * 0x1400)) = enaddr[i];*/
+ DP_OUT(base, DP_P1_PAR0+i, enaddr[i]);
+ }
+ /* Enable and start device */
+ DP_OUT(base, DP_CR, DP_CR_PAGE0 | DP_CR_NODMA | DP_CR_START);
+ DP_OUT(base, DP_TCR, DP_TCR_NORMAL); /* Normal transmit operations */
+ DP_OUT(base, DP_RCR, DP_RCR_AB); /* Accept broadcast, no errors, no multicast */
+ dp->running = true;
+}
+
+/*
+ * This routine is called to start the transmitter. It is split out from the
+ * data handling routine so it may be called either when data becomes first
+ * available or when an Tx interrupt occurs
+ */
+
+static void
+dp83902a_start_xmit(int start_page, int len)
+{
+ dp83902a_priv_data_t *dp = (dp83902a_priv_data_t *) &nic;
+ u8 *base = dp->base;
+
+ DEBUG_FUNCTION();
+
+#if DEBUG & 1
+ printf("Tx pkt %d len %d\n", start_page, len);
+ if (dp->tx_started)
+ printf("TX already started?!?\n");
+#endif
+
+ DP_OUT(base, DP_ISR, (DP_ISR_TxP | DP_ISR_TxE));
+ DP_OUT(base, DP_CR, DP_CR_PAGE0 | DP_CR_NODMA | DP_CR_START);
+ DP_OUT(base, DP_TBCL, len & 0xFF);
+ DP_OUT(base, DP_TBCH, len >> 8);
+ DP_OUT(base, DP_TPSR, start_page);
+ DP_OUT(base, DP_CR, DP_CR_NODMA | DP_CR_TXPKT | DP_CR_START);
+
+ dp->tx_started = true;
+}
+
+/*
+ * This routine is called to send data to the hardware. It is known a-priori
+ * that there is free buffer space (dp->tx_next).
+ */
+static void
+dp83902a_send(u8 *data, int total_len, u32 key)
+{
+ struct dp83902a_priv_data *dp = (struct dp83902a_priv_data *) &nic;
+ u8 *base = dp->base;
+ int len, start_page, pkt_len, i, isr;
+#if DEBUG & 4
+ int dx;
+#endif
+
+ DEBUG_FUNCTION();
+
+ len = pkt_len = total_len;
+ if (pkt_len < IEEE_8023_MIN_FRAME)
+ pkt_len = IEEE_8023_MIN_FRAME;
+
+ start_page = dp->tx_next;
+ if (dp->tx_next == dp->tx_buf1) {
+ dp->tx1 = start_page;
+ dp->tx1_len = pkt_len;
+ dp->tx1_key = key;
+ dp->tx_next = dp->tx_buf2;
+ } else {
+ dp->tx2 = start_page;
+ dp->tx2_len = pkt_len;
+ dp->tx2_key = key;
+ dp->tx_next = dp->tx_buf1;
+ }
+
+#if DEBUG & 5
+ printf("TX prep page %d len %d\n", start_page, pkt_len);
+#endif
+
+ DP_OUT(base, DP_ISR, DP_ISR_RDC); /* Clear end of DMA */
+ {
+ /*
+ * Dummy read. The manual sez something slightly different,
+ * but the code is extended a bit to do what Hitachi's monitor
+ * does (i.e., also read data).
+ */
+
+ u16 tmp;
+ int len = 1;
+
+ DP_OUT(base, DP_RSAL, 0x100 - len);
+ DP_OUT(base, DP_RSAH, (start_page - 1) & 0xff);
+ DP_OUT(base, DP_RBCL, len);
+ DP_OUT(base, DP_RBCH, 0);
+ DP_OUT(base, DP_CR, DP_CR_PAGE0 | DP_CR_RDMA | DP_CR_START);
+ DP_IN_DATA(dp->data, tmp);
+ }
+
+#ifdef CYGHWR_NS_DP83902A_PLF_BROKEN_TX_DMA
+ /*
+ * Stall for a bit before continuing to work around random data
+ * corruption problems on some platforms.
+ */
+ CYGACC_CALL_IF_DELAY_US(1);
+#endif
+
+ /* Send data to device buffer(s) */
+ DP_OUT(base, DP_RSAL, 0);
+ DP_OUT(base, DP_RSAH, start_page);
+ DP_OUT(base, DP_RBCL, pkt_len & 0xFF);
+ DP_OUT(base, DP_RBCH, pkt_len >> 8);
+ DP_OUT(base, DP_CR, DP_CR_WDMA | DP_CR_START);
+
+ /* Put data into buffer */
+#if DEBUG & 4
+ printf(" sg buf %08lx len %08x\n ", (u32)data, len);
+ dx = 0;
+#endif
+ while (len > 0) {
+#if DEBUG & 4
+ printf(" %02x", *data);
+ if (0 == (++dx % 16)) printf("\n ");
+#endif
+
+ DP_OUT_DATA(dp->data, *data++);
+ len--;
+ }
+#if DEBUG & 4
+ printf("\n");
+#endif
+ if (total_len < pkt_len) {
+#if DEBUG & 4
+ printf(" + %d bytes of padding\n", pkt_len - total_len);
+#endif
+ /* Padding to 802.3 length was required */
+ for (i = total_len; i < pkt_len;) {
+ i++;
+ DP_OUT_DATA(dp->data, 0);
+ }
+ }
+
+#ifdef CYGHWR_NS_DP83902A_PLF_BROKEN_TX_DMA
+ /*
+ * After last data write, delay for a bit before accessing the
+ * device again, or we may get random data corruption in the last
+ * datum (on some platforms).
+ */
+ CYGACC_CALL_IF_DELAY_US(1);
+#endif
+
+ /* Wait for DMA to complete */
+ do {
+ DP_IN(base, DP_ISR, isr);
+ } while ((isr & DP_ISR_RDC) == 0);
+
+ /* Then disable DMA */
+ DP_OUT(base, DP_CR, DP_CR_PAGE0 | DP_CR_NODMA | DP_CR_START);
+
+ /* Start transmit if not already going */
+ if (!dp->tx_started) {
+ if (start_page == dp->tx1) {
+ dp->tx_int = 1; /* Expecting interrupt from BUF1 */
+ } else {
+ dp->tx_int = 2; /* Expecting interrupt from BUF2 */
+ }
+ dp83902a_start_xmit(start_page, pkt_len);
+ }
+}
+
+/*
+ * This function is called when a packet has been received. It's job is
+ * to prepare to unload the packet from the hardware. Once the length of
+ * the packet is known, the upper layer of the driver can be told. When
+ * the upper layer is ready to unload the packet, the internal function
+ * 'dp83902a_recv' will be called to actually fetch it from the hardware.
+ */
+static void
+dp83902a_RxEvent(void)
+{
+ struct dp83902a_priv_data *dp = (struct dp83902a_priv_data *) &nic;
+ u8 *base = dp->base;
+ u8 rsr;
+ u8 rcv_hdr[4];
+ int i, len, pkt, cur;
+
+ DEBUG_FUNCTION();
+
+ DP_IN(base, DP_RSR, rsr);
+ while (true) {
+ /* Read incoming packet header */
+ DP_OUT(base, DP_CR, DP_CR_PAGE1 | DP_CR_NODMA | DP_CR_START);
+ DP_IN(base, DP_P1_CURP, cur);
+ DP_OUT(base, DP_P1_CR, DP_CR_PAGE0 | DP_CR_NODMA | DP_CR_START);
+ DP_IN(base, DP_BNDRY, pkt);
+
+ pkt += 1;
+ if (pkt == dp->rx_buf_end)
+ pkt = dp->rx_buf_start;
+
+ if (pkt == cur) {
+ break;
+ }
+ DP_OUT(base, DP_RBCL, sizeof(rcv_hdr));
+ DP_OUT(base, DP_RBCH, 0);
+ DP_OUT(base, DP_RSAL, 0);
+ DP_OUT(base, DP_RSAH, pkt);
+ if (dp->rx_next == pkt) {
+ if (cur == dp->rx_buf_start)
+ DP_OUT(base, DP_BNDRY, dp->rx_buf_end - 1);
+ else
+ DP_OUT(base, DP_BNDRY, cur - 1); /* Update pointer */
+ return;
+ }
+ dp->rx_next = pkt;
+ DP_OUT(base, DP_ISR, DP_ISR_RDC); /* Clear end of DMA */
+ DP_OUT(base, DP_CR, DP_CR_RDMA | DP_CR_START);
+#ifdef CYGHWR_NS_DP83902A_PLF_BROKEN_RX_DMA
+ CYGACC_CALL_IF_DELAY_US(10);
+#endif
+
+ /* read header (get data size)*/
+ for (i = 0; i < sizeof(rcv_hdr);) {
+ DP_IN_DATA(dp->data, rcv_hdr[i++]);
+ }
+
+#if DEBUG & 5
+ printf("rx hdr %02x %02x %02x %02x\n",
+ rcv_hdr[0], rcv_hdr[1], rcv_hdr[2], rcv_hdr[3]);
+#endif
+ len = ((rcv_hdr[3] << 8) | rcv_hdr[2]) - sizeof(rcv_hdr);
+
+ /* data read */
+ uboot_push_packet_len(len);
+
+ if (rcv_hdr[1] == dp->rx_buf_start)
+ DP_OUT(base, DP_BNDRY, dp->rx_buf_end - 1);
+ else
+ DP_OUT(base, DP_BNDRY, rcv_hdr[1] - 1); /* Update pointer */
+ }
+}
+
+/*
+ * This function is called as a result of the "eth_drv_recv()" call above.
+ * It's job is to actually fetch data for a packet from the hardware once
+ * memory buffers have been allocated for the packet. Note that the buffers
+ * may come in pieces, using a scatter-gather list. This allows for more
+ * efficient processing in the upper layers of the stack.
+ */
+static void
+dp83902a_recv(u8 *data, int len)
+{
+ struct dp83902a_priv_data *dp = (struct dp83902a_priv_data *) &nic;
+ u8 *base = dp->base;
+ int i, mlen;
+ u8 saved_char = 0;
+ bool saved;
+#if DEBUG & 4
+ int dx;
+#endif
+
+ DEBUG_FUNCTION();
+
+#if DEBUG & 5
+ printf("Rx packet %d length %d\n", dp->rx_next, len);
+#endif
+
+ /* Read incoming packet data */
+ DP_OUT(base, DP_CR, DP_CR_PAGE0 | DP_CR_NODMA | DP_CR_START);
+ DP_OUT(base, DP_RBCL, len & 0xFF);
+ DP_OUT(base, DP_RBCH, len >> 8);
+ DP_OUT(base, DP_RSAL, 4); /* Past header */
+ DP_OUT(base, DP_RSAH, dp->rx_next);
+ DP_OUT(base, DP_ISR, DP_ISR_RDC); /* Clear end of DMA */
+ DP_OUT(base, DP_CR, DP_CR_RDMA | DP_CR_START);
+#ifdef CYGHWR_NS_DP83902A_PLF_BROKEN_RX_DMA
+ CYGACC_CALL_IF_DELAY_US(10);
+#endif
+
+ saved = false;
+ for (i = 0; i < 1; i++) {
+ if (data) {
+ mlen = len;
+#if DEBUG & 4
+ printf(" sg buf %08lx len %08x \n", (u32) data, mlen);
+ dx = 0;
+#endif
+ while (0 < mlen) {
+ /* Saved byte from previous loop? */
+ if (saved) {
+ *data++ = saved_char;
+ mlen--;
+ saved = false;
+ continue;
+ }
+
+ {
+ u8 tmp;
+ DP_IN_DATA(dp->data, tmp);
+#if DEBUG & 4
+ printf(" %02x", tmp);
+ if (0 == (++dx % 16)) printf("\n ");
+#endif
+ *data++ = tmp;;
+ mlen--;
+ }
+ }
+#if DEBUG & 4
+ printf("\n");
+#endif
+ }
+ }
+}
+
+static void
+dp83902a_TxEvent(void)
+{
+ struct dp83902a_priv_data *dp = (struct dp83902a_priv_data *) &nic;
+ u8 *base = dp->base;
+ u8 tsr;
+ u32 key;
+
+ DEBUG_FUNCTION();
+
+ DP_IN(base, DP_TSR, tsr);
+ if (dp->tx_int == 1) {
+ key = dp->tx1_key;
+ dp->tx1 = 0;
+ } else {
+ key = dp->tx2_key;
+ dp->tx2 = 0;
+ }
+ /* Start next packet if one is ready */
+ dp->tx_started = false;
+ if (dp->tx1) {
+ dp83902a_start_xmit(dp->tx1, dp->tx1_len);
+ dp->tx_int = 1;
+ } else if (dp->tx2) {
+ dp83902a_start_xmit(dp->tx2, dp->tx2_len);
+ dp->tx_int = 2;
+ } else {
+ dp->tx_int = 0;
+ }
+ /* Tell higher level we sent this packet */
+ uboot_push_tx_done(key, 0);
+}
+
+/*
+ * Read the tally counters to clear them. Called in response to a CNT
+ * interrupt.
+ */
+static void
+dp83902a_ClearCounters(void)
+{
+ struct dp83902a_priv_data *dp = (struct dp83902a_priv_data *) &nic;
+ u8 *base = dp->base;
+ u8 cnt1, cnt2, cnt3;
+
+ DP_IN(base, DP_FER, cnt1);
+ DP_IN(base, DP_CER, cnt2);
+ DP_IN(base, DP_MISSED, cnt3);
+ DP_OUT(base, DP_ISR, DP_ISR_CNT);
+}
+
+/*
+ * Deal with an overflow condition. This code follows the procedure set
+ * out in section 7.0 of the datasheet.
+ */
+static void
+dp83902a_Overflow(void)
+{
+ struct dp83902a_priv_data *dp = (struct dp83902a_priv_data *)&nic;
+ u8 *base = dp->base;
+ u8 isr;
+
+ /* Issue a stop command and wait 1.6ms for it to complete. */
+ DP_OUT(base, DP_CR, DP_CR_STOP | DP_CR_NODMA);
+ CYGACC_CALL_IF_DELAY_US(1600);
+
+ /* Clear the remote byte counter registers. */
+ DP_OUT(base, DP_RBCL, 0);
+ DP_OUT(base, DP_RBCH, 0);
+
+ /* Enter loopback mode while we clear the buffer. */
+ DP_OUT(base, DP_TCR, DP_TCR_LOCAL);
+ DP_OUT(base, DP_CR, DP_CR_START | DP_CR_NODMA);
+
+ /*
+ * Read in as many packets as we can and acknowledge any and receive
+ * interrupts. Since the buffer has overflowed, a receive event of
+ * some kind will have occured.
+ */
+ dp83902a_RxEvent();
+ DP_OUT(base, DP_ISR, DP_ISR_RxP|DP_ISR_RxE);
+
+ /* Clear the overflow condition and leave loopback mode. */
+ DP_OUT(base, DP_ISR, DP_ISR_OFLW);
+ DP_OUT(base, DP_TCR, DP_TCR_NORMAL);
+
+ /*
+ * If a transmit command was issued, but no transmit event has occured,
+ * restart it here.
+ */
+ DP_IN(base, DP_ISR, isr);
+ if (dp->tx_started && !(isr & (DP_ISR_TxP|DP_ISR_TxE))) {
+ DP_OUT(base, DP_CR, DP_CR_NODMA | DP_CR_TXPKT | DP_CR_START);
+ }
+}
+
+static void
+dp83902a_poll(void)
+{
+ struct dp83902a_priv_data *dp = (struct dp83902a_priv_data *) &nic;
+ u8 *base = dp->base;
+ u8 isr;
+
+ DP_OUT(base, DP_CR, DP_CR_NODMA | DP_CR_PAGE0 | DP_CR_START);
+ DP_IN(base, DP_ISR, isr);
+ while (0 != isr) {
+ /*
+ * The CNT interrupt triggers when the MSB of one of the error
+ * counters is set. We don't much care about these counters, but
+ * we should read their values to reset them.
+ */
+ if (isr & DP_ISR_CNT) {
+ dp83902a_ClearCounters();
+ }
+ /*
+ * Check for overflow. It's a special case, since there's a
+ * particular procedure that must be followed to get back into
+ * a running state.a
+ */
+ if (isr & DP_ISR_OFLW) {
+ dp83902a_Overflow();
+ } else {
+ /*
+ * Other kinds of interrupts can be acknowledged simply by
+ * clearing the relevant bits of the ISR. Do that now, then
+ * handle the interrupts we care about.
+ */
+ DP_OUT(base, DP_ISR, isr); /* Clear set bits */
+ if (!dp->running) break; /* Is this necessary? */
+ /*
+ * Check for tx_started on TX event since these may happen
+ * spuriously it seems.
+ */
+ if (isr & (DP_ISR_TxP|DP_ISR_TxE) && dp->tx_started) {
+ dp83902a_TxEvent();
+ }
+ if (isr & (DP_ISR_RxP|DP_ISR_RxE)) {
+ dp83902a_RxEvent();
+ }
+ }
+ DP_IN(base, DP_ISR, isr);
+ }
+}
+
+
+/* U-boot specific routines */
+static u8 *pbuf = NULL;
+
+static int pkey = -1;
+static int initialized = 0;
+
+void uboot_push_packet_len(int len) {
+ PRINTK("pushed len = %d\n", len);
+ if (len >= 2000) {
+ printf("NE2000: packet too big\n");
+ return;
+ }
+ dp83902a_recv(&pbuf[0], len);
+
+ /*Just pass it to the upper layer*/
+ NetReceive(&pbuf[0], len);
+}
+
+void uboot_push_tx_done(int key, int val) {
+ PRINTK("pushed key = %d\n", key);
+ pkey = key;
+}
+
+int eth_init(bd_t *bd) {
+ int r;
+ u8 dev_addr[6];
+ char ethaddr[20];
+
+ PRINTK("### eth_init\n");
+
+ if (!pbuf) {
+ pbuf = malloc(2000);
+ if (!pbuf) {
+ printf("Cannot allocate rx buffer\n");
+ return -1;
+ }
+ }
+
+#ifdef CONFIG_DRIVER_NE2000_CCR
+ {
+ vu_char *p = (vu_char *) CONFIG_DRIVER_NE2000_CCR;
+
+ PRINTK("CCR before is %x\n", *p);
+ *p = CONFIG_DRIVER_NE2000_VAL;
+ PRINTK("CCR after is %x\n", *p);
+ }
+#endif
+
+ nic.base = (u8 *) CONFIG_DRIVER_NE2000_BASE;
+
+ r = get_prom(dev_addr, nic.base);
+ if (!r)
+ return -1;
+
+ sprintf (ethaddr, "%02X:%02X:%02X:%02X:%02X:%02X",
+ dev_addr[0], dev_addr[1],
+ dev_addr[2], dev_addr[3],
+ dev_addr[4], dev_addr[5]) ;
+ PRINTK("Set environment from HW MAC addr = \"%s\"\n", ethaddr);
+ setenv ("ethaddr", ethaddr);
+
+ nic.data = nic.base + DP_DATA;
+ nic.tx_buf1 = START_PG;
+ nic.tx_buf2 = START_PG2;
+ nic.rx_buf_start = RX_START;
+ nic.rx_buf_end = RX_END;
+
+ if (dp83902a_init() == false)
+ return -1;
+
+ dp83902a_start(dev_addr);
+ initialized = 1;
+
+ return 0;
+}
+
+void eth_halt() {
+
+ PRINTK("### eth_halt\n");
+ if(initialized)
+ dp83902a_stop();
+ initialized = 0;
+}
+
+int eth_rx() {
+ dp83902a_poll();
+ return 1;
+}
+
+int eth_send(volatile void *packet, int length) {
+ int tmo;
+
+ PRINTK("### eth_send\n");
+
+ pkey = -1;
+
+ dp83902a_send((u8 *) packet, length, 666);
+ tmo = get_timer (0) + TOUT * CFG_HZ;
+ while(1) {
+ dp83902a_poll();
+ if (pkey != -1) {
+ PRINTK("Packet sucesfully sent\n");
+ return 0;
+ }
+ if (get_timer (0) >= tmo) {
+ printf("transmission error (timoeut)\n");
+ return 0;
+ }
+
+ }
+ return 0;
+}
diff --git a/drivers/net/ne2000_base.h b/drivers/net/ne2000_base.h
index 948b290..5446de4 100644
--- a/drivers/net/ne2000_base.h
+++ b/drivers/net/ne2000_base.h
@@ -80,10 +80,35 @@ are GPL, so this is, of course, GPL.
#define __NE2000_BASE_H__
#define bool int
-
#define false 0
#define true 1
+/*
+ * Debugging details
+ *
+ * Set to perms of:
+ * 0 disables all debug output
+ * 1 for process debug output
+ * 2 for added data IO output: get_reg, put_reg
+ * 4 for packet allocation/free output
+ * 8 for only startup status, so we can tell we're installed OK
+ */
+#if 0
+#define DEBUG 0xf
+#else
+#define DEBUG 0
+#endif
+
+#if DEBUG & 1
+#define DEBUG_FUNCTION() do { printf("%s\n", __FUNCTION__); } while (0)
+#define DEBUG_LINE() do { printf("%d\n", __LINE__); } while (0)
+#define PRINTK(args...) printf(args)
+#else
+#define DEBUG_FUNCTION() do {} while(0)
+#define DEBUG_LINE() do {} while(0)
+#define PRINTK(args...)
+#endif
+
/* timeout for tx/rx in s */
#define TOUT 5
/* Ether MAC address size */
@@ -119,11 +144,6 @@ typedef struct dp83902a_priv_data {
int rx_buf_start, rx_buf_end;
} dp83902a_priv_data_t;
-/*
- * Some forward declarations
- */
-static void dp83902a_poll(void);
-
/* ------------------------------------------------------------------------ */
/* Register offsets */
@@ -281,4 +301,8 @@ static void dp83902a_poll(void);
#define IEEE_8023_MAX_FRAME 1518 /* Largest possible ethernet frame */
#define IEEE_8023_MIN_FRAME 64 /* Smallest possible ethernet frame */
+
+/* Functions */
+int get_prom(u8* mac_addr, u8* base_addr);
+
#endif /* __NE2000_BASE_H__ */
diff --git a/drivers/net/tsec.c b/drivers/net/tsec.c
index 8ab6d07..e34076f 100644
--- a/drivers/net/tsec.c
+++ b/drivers/net/tsec.c
@@ -1366,6 +1366,8 @@ struct phy_info phy_info_VSC8601 = {
{MIIM_EXT_PAGE_ACCESS,0,NULL},
#endif
#endif
+ {MIIM_ANAR, MIIM_ANAR_INIT, NULL},
+ {MIIM_CONTROL, MIIM_CONTROL_RESTART, &mii_cr_init},
{miim_end,}
},
(struct phy_cmd[]){ /* startup */