Merge branch 'master' of git://git.denx.de/u-boot-blackfin

59 files changed, 2107 insertions, 1807 deletions

diff --git a/blackfin_config.mk b/blackfin_config.mk
index f3fcd7a..04a7529 100644
--- a/blackfin_config.mk
+++ b/blackfin_config.mk
@@ -36,6 +36,7 @@ endif
 
 SYM_PREFIX = _
 
+LDR_FLAGS += -J
 LDR_FLAGS += --bmode $(subst BFIN_BOOT_,,$(CONFIG_BFIN_BOOT_MODE))
 LDR_FLAGS += --use-vmas
 ifneq ($(CONFIG_BFIN_BOOT_MODE),BFIN_BOOT_BYPASS)
diff --git a/board/bf533-ezkit/u-boot.lds.S b/board/bf533-ezkit/u-boot.lds.S
index da16726..f80f894 100644
--- a/board/bf533-ezkit/u-boot.lds.S
+++ b/board/bf533-ezkit/u-boot.lds.S
@@ -44,12 +44,11 @@
 
 OUTPUT_ARCH(bfin)
 
-/* The 0xC offset is so we don't clobber the tiny LDR jump block. */
 MEMORY
 {
 	ram     : ORIGIN = CONFIG_SYS_MONITOR_BASE, LENGTH = CONFIG_SYS_MONITOR_LEN
-	l1_code : ORIGIN = L1_INST_SRAM+0xC, LENGTH = L1_INST_SRAM_SIZE
-	l1_data : ORIGIN = L1_DATA_B_SRAM,   LENGTH = L1_DATA_B_SRAM_SIZE
+	l1_code : ORIGIN = L1_INST_SRAM,            LENGTH = L1_INST_SRAM_SIZE
+	l1_data : ORIGIN = L1_DATA_B_SRAM,          LENGTH = L1_DATA_B_SRAM_SIZE
 }
 
 ENTRY(_start)
diff --git a/board/bf533-stamp/bf533-stamp.c b/board/bf533-stamp/bf533-stamp.c
index 44ebc93..7108dda 100644
--- a/board/bf533-stamp/bf533-stamp.c
+++ b/board/bf533-stamp/bf533-stamp.c
@@ -1,7 +1,7 @@
 /*
- * U-boot - stamp.c STAMP board specific routines
+ * U-boot - main board file
  *
- * Copyright (c) 2005-2007 Analog Devices Inc.
+ * Copyright (c) 2005-2008 Analog Devices Inc.
  *
  * (C) Copyright 2000-2004
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
@@ -31,15 +31,6 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#define STATUS_LED_OFF 0
-#define STATUS_LED_ON  1
-
-#ifdef CONFIG_SHOW_BOOT_PROGRESS
-# define SHOW_BOOT_PROGRESS(arg)	show_boot_progress(arg)
-#else
-# define SHOW_BOOT_PROGRESS(arg)
-#endif
-
 int checkboard(void)
 {
 	printf("Board: ADI BF533 Stamp board\n");
@@ -192,10 +183,15 @@ void cf_outsw(unsigned short *addr, unsigned short *sect_buf, int words)
 }
 #endif
 
-void stamp_led_set(int LED1, int LED2, int LED3)
+#ifdef CONFIG_SHOW_BOOT_PROGRESS
+
+#define STATUS_LED_OFF 0
+#define STATUS_LED_ON  1
+
+static void stamp_led_set(int LED1, int LED2, int LED3)
 {
-	*pFIO_INEN &= ~(PF2 | PF3 | PF4);
-	*pFIO_DIR |= (PF2 | PF3 | PF4);
+	bfin_write_FIO_INEN(bfin_read_FIO_INEN() & ~(PF2 | PF3 | PF4));
+	bfin_write_FIO_DIR(bfin_read_FIO_DIR() | (PF2 | PF3 | PF4));
 
 	if (LED1 == STATUS_LED_OFF)
 		*pFIO_FLAG_S = PF2;
@@ -249,3 +245,41 @@ void show_boot_progress(int status)
 		break;
 	}
 }
+#endif
+
+#ifdef CONFIG_STATUS_LED
+#include <status_led.h>
+
+static void set_led(int pf, int state)
+{
+	switch (state) {
+		case STATUS_LED_OFF:      bfin_write_FIO_FLAG_S(pf); break;
+		case STATUS_LED_BLINKING: bfin_write_FIO_FLAG_T(pf); break;
+		case STATUS_LED_ON:       bfin_write_FIO_FLAG_C(pf); break;
+	}
+}
+
+static void set_leds(led_id_t mask, int state)
+{
+	if (mask & 0x1) set_led(PF2, state);
+	if (mask & 0x2) set_led(PF3, state);
+	if (mask & 0x4) set_led(PF4, state);
+}
+
+void __led_init(led_id_t mask, int state)
+{
+	bfin_write_FIO_INEN(bfin_read_FIO_INEN() & ~(PF2 | PF3 | PF4));
+	bfin_write_FIO_DIR(bfin_read_FIO_DIR() | (PF2 | PF3 | PF4));
+}
+
+void __led_set(led_id_t mask, int state)
+{
+	set_leds(mask, state);
+}
+
+void __led_toggle(led_id_t mask)
+{
+	set_leds(mask, STATUS_LED_BLINKING);
+}
+
+#endif
diff --git a/board/bf533-stamp/u-boot.lds.S b/board/bf533-stamp/u-boot.lds.S
index 76daa75..8ddfa81 100644
--- a/board/bf533-stamp/u-boot.lds.S
+++ b/board/bf533-stamp/u-boot.lds.S
@@ -44,12 +44,11 @@
 
 OUTPUT_ARCH(bfin)
 
-/* The 0xC offset is so we don't clobber the tiny LDR jump block. */
 MEMORY
 {
 	ram     : ORIGIN = CONFIG_SYS_MONITOR_BASE, LENGTH = CONFIG_SYS_MONITOR_LEN
-	l1_code : ORIGIN = L1_INST_SRAM+0xC, LENGTH = L1_INST_SRAM_SIZE
-	l1_data : ORIGIN = L1_DATA_B_SRAM,   LENGTH = L1_DATA_B_SRAM_SIZE
+	l1_code : ORIGIN = L1_INST_SRAM,            LENGTH = L1_INST_SRAM_SIZE
+	l1_data : ORIGIN = L1_DATA_B_SRAM,          LENGTH = L1_DATA_B_SRAM_SIZE
 }
 
 ENTRY(_start)
diff --git a/board/bf537-stamp/Makefile b/board/bf537-stamp/Makefile
index cb38b96..3b875a3 100644
--- a/board/bf537-stamp/Makefile
+++ b/board/bf537-stamp/Makefile
@@ -29,9 +29,10 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(BOARD).a
 
-COBJS-y	:= $(BOARD).o post-memory.o cmd_bf537led.o
+COBJS-y	:= $(BOARD).o cmd_bf537led.o
 COBJS-$(CONFIG_CMD_EEPROM) += spi_flash.o
 COBJS-$(CONFIG_CMD_NAND)   += nand.o
+COBJS-$(CONFIG_POST)       += post.o post-memory.o
 
 SRCS	:= $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS-y))
diff --git a/board/bf537-stamp/bf537-stamp.c b/board/bf537-stamp/bf537-stamp.c
index 5b619be..16ffe2f 100644
--- a/board/bf537-stamp/bf537-stamp.c
+++ b/board/bf537-stamp/bf537-stamp.c
@@ -1,7 +1,7 @@
 /*
- * U-boot - BF537.c
+ * U-boot - main board file
  *
- * Copyright (c) 2005-2007 Analog Devices Inc.
+ * Copyright (c) 2005-2008 Analog Devices Inc.
  *
  * (C) Copyright 2000-2004
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
@@ -29,15 +29,13 @@
 #include <config.h>
 #include <command.h>
 #include <asm/blackfin.h>
-#include <asm/io.h>
+#include <asm/net.h>
 #include <net.h>
 #include <asm/mach-common/bits/bootrom.h>
 #include <netdev.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#define POST_WORD_ADDR 0xFF903FFC
-
 int checkboard(void)
 {
 	printf("Board: ADI BF537 stamp board\n");
@@ -89,22 +87,63 @@ phys_size_t initdram(int board_type)
 	return gd->bd->bi_memsize;
 }
 
+void board_reset(void)
+{
+	/* workaround for weak pull ups on ssel */
+	if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_SPI_MASTER) {
+		bfin_write_PORTF_FER(bfin_read_PORTF_FER() & ~PF10);
+		bfin_write_PORTFIO_SET(PF10);
+		udelay(1);
+	}
+}
+
+#ifdef CONFIG_BFIN_MAC
+static void board_init_enetaddr(uchar *mac_addr)
+{
+#ifdef CONFIG_SYS_NO_FLASH
+# define USE_MAC_IN_FLASH 0
+#else
+# define USE_MAC_IN_FLASH 1
+#endif
+	bool valid_mac = false;
+
+	if (USE_MAC_IN_FLASH) {
+		/* we cram the MAC in the last flash sector */
+		uchar *board_mac_addr = (uchar *)0x203F0000;
+		if (is_valid_ether_addr(board_mac_addr)) {
+			memcpy(mac_addr, board_mac_addr, 6);
+			valid_mac = true;
+		}
+	}
+
+	if (!valid_mac) {
+		puts("Warning: Generating 'random' MAC address\n");
+		bfin_gen_rand_mac(mac_addr);
+	}
+
+	eth_setenv_enetaddr("ethaddr", mac_addr);
+}
+
+int board_eth_init(bd_t *bis)
+{
+	return bfin_EMAC_initialize(bis);
+}
+#endif
+
 #if defined(CONFIG_MISC_INIT_R)
 /* miscellaneous platform dependent initialisations */
 int misc_init_r(void)
 {
-#if defined(CONFIG_CMD_NET)
-	char nid[32];
-	unsigned char *pMACaddr = (unsigned char *)0x203F0000;
+#ifdef CONFIG_BFIN_MAC
+	uchar enetaddr[6];
+	if (!eth_getenv_enetaddr("ethaddr", enetaddr))
+		board_init_enetaddr(enetaddr);
+#endif
 
-	/* The 0xFF check here is to make sure we don't use the address
-	 * in flash if it's simply been erased (aka all 0xFF values) */
-	if (getenv("ethaddr") == NULL && is_valid_ether_addr(pMACaddr)) {
-		sprintf(nid, "%02x:%02x:%02x:%02x:%02x:%02x",
-			pMACaddr[0], pMACaddr[1],
-			pMACaddr[2], pMACaddr[3], pMACaddr[4], pMACaddr[5]);
-		setenv("ethaddr", nid);
-	}
+#ifndef CONFIG_SYS_NO_FLASH
+	/* we use the last sector for the MAC address / POST LDR */
+	extern flash_info_t flash_info[];
+	flash_protect(FLAG_PROTECT_SET, 0x203F0000, 0x203FFFFF, &flash_info[0]);
 #endif
 
 #if defined(CONFIG_BFIN_IDE)
@@ -126,245 +165,3 @@ int misc_init_r(void)
 	return 0;
 }
 #endif				/* CONFIG_MISC_INIT_R */
-
-#if defined(CONFIG_BFIN_MAC)
-
-int board_eth_init(bd_t *bis)
-{
-	return bfin_EMAC_initialize(bis);
-}
-#endif
-
-#ifdef CONFIG_POST
-/* Using sw10-PF5 as the hotkey */
-int post_hotkeys_pressed(void)
-{
-	int delay = 3;
-	int i;
-	unsigned short value;
-
-	*pPORTF_FER &= ~PF5;
-	*pPORTFIO_DIR &= ~PF5;
-	*pPORTFIO_INEN |= PF5;
-
-	printf("########Press SW10 to enter Memory POST########: %2d ", delay);
-	while (delay--) {
-		for (i = 0; i < 100; i++) {
-			value = *pPORTFIO & PF5;
-			if (value != 0) {
-				break;
-			}
-			udelay(10000);
-		}
-		printf("\b\b\b%2d ", delay);
-	}
-	printf("\b\b\b 0");
-	printf("\n");
-	if (value == 0)
-		return 0;
-	else {
-		printf("Hotkey has been pressed, Enter POST . . . . . .\n");
-		return 1;
-	}
-}
-#endif
-
-#if defined(CONFIG_POST) || defined(CONFIG_LOGBUFFER)
-void post_word_store(ulong a)
-{
-	volatile ulong *save_addr = (volatile ulong *)POST_WORD_ADDR;
-	*save_addr = a;
-}
-
-ulong post_word_load(void)
-{
-	volatile ulong *save_addr = (volatile ulong *)POST_WORD_ADDR;
-	return *save_addr;
-}
-#endif
-
-#ifdef CONFIG_POST
-int uart_post_test(int flags)
-{
-	return 0;
-}
-
-#define BLOCK_SIZE 0x10000
-#define VERIFY_ADDR 0x2000000
-extern int erase_block_flash(int);
-extern int write_data(long lStart, long lCount, uchar * pnData);
-int flash_post_test(int flags)
-{
-	unsigned short *pbuf, *temp;
-	int offset, n, i;
-	int value = 0;
-	int result = 0;
-	printf("\n");
-	pbuf = (unsigned short *)VERIFY_ADDR;
-	temp = pbuf;
-	for (n = FLASH_START_POST_BLOCK; n < FLASH_END_POST_BLOCK; n++) {
-		offset = (n - 7) * BLOCK_SIZE;
-		printf("--------Erase   block:%2d..", n);
-		erase_block_flash(n);
-		printf("OK\r");
-		printf("--------Program block:%2d...", n);
-		write_data(CONFIG_SYS_FLASH_BASE + offset, BLOCK_SIZE, pbuf);
-		printf("OK\r");
-		printf("--------Verify  block:%2d...", n);
-		for (i = 0; i < BLOCK_SIZE; i += 2) {
-			if (*(unsigned short *)(CONFIG_SYS_FLASH_BASE + offset + i) !=
-			    *temp++) {
-				value = 1;
-				result = 1;
-			}
-		}
-		if (value)
-			printf("failed\n");
-		else
-			printf("OK		%3d%%\r",
-			       (int)(
-				     (n + 1 -
-				      FLASH_START_POST_BLOCK) *
-				     100 / (FLASH_END_POST_BLOCK -
-					    FLASH_START_POST_BLOCK)));
-
-		temp = pbuf;
-		value = 0;
-	}
-	printf("\n");
-	if (result)
-		return -1;
-	else
-		return 0;
-}
-
-/****************************************************
- * LED1 ---- PF6	LED2 ---- PF7		    *
- * LED3 ---- PF8	LED4 ---- PF9		    *
- * LED5 ---- PF10	LED6 ---- PF11		    *
- ****************************************************/
-int led_post_test(int flags)
-{
-	*pPORTF_FER &= ~(PF6 | PF7 | PF8 | PF9 | PF10 | PF11);
-	*pPORTFIO_DIR |= PF6 | PF7 | PF8 | PF9 | PF10 | PF11;
-	*pPORTFIO_INEN &= ~(PF6 | PF7 | PF8 | PF9 | PF10 | PF11);
-	*pPORTFIO &= ~(PF6 | PF7 | PF8 | PF9 | PF10 | PF11);
-	udelay(1000000);
-	printf("LED1 on");
-	*pPORTFIO |= PF6;
-	udelay(1000000);
-	printf("\b\b\b\b\b\b\b");
-	printf("LED2 on");
-	*pPORTFIO |= PF7;
-	udelay(1000000);
-	printf("\b\b\b\b\b\b\b");
-	printf("LED3 on");
-	*pPORTFIO |= PF8;
-	udelay(1000000);
-	printf("\b\b\b\b\b\b\b");
-	printf("LED4 on");
-	*pPORTFIO |= PF9;
-	udelay(1000000);
-	printf("\b\b\b\b\b\b\b");
-	printf("LED5 on");
-	*pPORTFIO |= PF10;
-	udelay(1000000);
-	printf("\b\b\b\b\b\b\b");
-	printf("lED6 on");
-	*pPORTFIO |= PF11;
-	printf("\b\b\b\b\b\b\b ");
-	return 0;
-}
-
-/************************************************
- *  SW10 ---- PF5	SW11 ---- PF4		*
- *  SW12 ---- PF3	SW13 ---- PF2		*
- ************************************************/
-int button_post_test(int flags)
-{
-	int i, delay = 5;
-	unsigned short value = 0;
-	int result = 0;
-
-	*pPORTF_FER &= ~(PF5 | PF4 | PF3 | PF2);
-	*pPORTFIO_DIR &= ~(PF5 | PF4 | PF3 | PF2);
-	*pPORTFIO_INEN |= (PF5 | PF4 | PF3 | PF2);
-
-	printf("\n--------Press SW10: %2d ", delay);
-	while (delay--) {
-		for (i = 0; i < 100; i++) {
-			value = *pPORTFIO & PF5;
-			if (value != 0) {
-				break;
-			}
-			udelay(10000);
-		}
-		printf("\b\b\b%2d ", delay);
-	}
-	if (value != 0)
-		printf("\b\bOK");
-	else {
-		result = -1;
-		printf("\b\bfailed");
-	}
-
-	delay = 5;
-	printf("\n--------Press SW11: %2d ", delay);
-	while (delay--) {
-		for (i = 0; i < 100; i++) {
-			value = *pPORTFIO & PF4;
-			if (value != 0) {
-				break;
-			}
-			udelay(10000);
-		}
-		printf("\b\b\b%2d ", delay);
-	}
-	if (value != 0)
-		printf("\b\bOK");
-	else {
-		result = -1;
-		printf("\b\bfailed");
-	}
-
-	delay = 5;
-	printf("\n--------Press SW12: %2d ", delay);
-	while (delay--) {
-		for (i = 0; i < 100; i++) {
-			value = *pPORTFIO & PF3;
-			if (value != 0) {
-				break;
-			}
-			udelay(10000);
-		}
-		printf("\b\b\b%2d ", delay);
-	}
-	if (value != 0)
-		printf("\b\bOK");
-	else {
-		result = -1;
-		printf("\b\bfailed");
-	}
-
-	delay = 5;
-	printf("\n--------Press SW13: %2d ", delay);
-	while (delay--) {
-		for (i = 0; i < 100; i++) {
-			value = *pPORTFIO & PF2;
-			if (value != 0) {
-				break;
-			}
-			udelay(10000);
-		}
-		printf("\b\b\b%2d ", delay);
-	}
-	if (value != 0)
-		printf("\b\bOK");
-	else {
-		result = -1;
-		printf("\b\bfailed");
-	}
-	printf("\n");
-	return result;
-}
-#endif
diff --git a/board/bf537-stamp/post-memory.c b/board/bf537-stamp/post-memory.c
index 9626f4c..4daea62 100644
--- a/board/bf537-stamp/post-memory.c
+++ b/board/bf537-stamp/post-memory.c
@@ -1,8 +1,6 @@
 #include <common.h>
 #include <asm/io.h>
 
-#ifdef CONFIG_POST
-
 #include <post.h>
 #include <watchdog.h>
 
@@ -318,4 +316,3 @@ int post_init_sdram(int sclk)
 }
 
 #endif				/* CONFIG_POST & CONFIG_SYS_POST_MEMORY */
-#endif				/* CONFIG_POST */
diff --git a/board/bf537-stamp/post.c b/board/bf537-stamp/post.c
new file mode 100644
index 0000000..4e844ba
--- /dev/null
+++ b/board/bf537-stamp/post.c
@@ -0,0 +1,244 @@
+/*
+ * BF537-STAMP POST code
+ *
+ * Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Copyright (c) 2005-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <common.h>
+#include <config.h>
+#include <command.h>
+#include <asm/blackfin.h>
+
+#define POST_WORD_ADDR 0xFF903FFC
+
+/* Using sw10-PF5 as the hotkey */
+int post_hotkeys_pressed(void)
+{
+	int delay = 3;
+	int i;
+	unsigned short value;
+
+	*pPORTF_FER &= ~PF5;
+	*pPORTFIO_DIR &= ~PF5;
+	*pPORTFIO_INEN |= PF5;
+
+	printf("########Press SW10 to enter Memory POST########: %2d ", delay);
+	while (delay--) {
+		for (i = 0; i < 100; i++) {
+			value = *pPORTFIO & PF5;
+			if (value != 0) {
+				break;
+			}
+			udelay(10000);
+		}
+		printf("\b\b\b%2d ", delay);
+	}
+	printf("\b\b\b 0");
+	printf("\n");
+	if (value == 0)
+		return 0;
+	else {
+		printf("Hotkey has been pressed, Enter POST . . . . . .\n");
+		return 1;
+	}
+}
+
+void post_word_store(ulong a)
+{
+	volatile ulong *save_addr = (volatile ulong *)POST_WORD_ADDR;
+	*save_addr = a;
+}
+
+ulong post_word_load(void)
+{
+	volatile ulong *save_addr = (volatile ulong *)POST_WORD_ADDR;
+	return *save_addr;
+}
+
+int uart_post_test(int flags)
+{
+	return 0;
+}
+
+#define BLOCK_SIZE 0x10000
+#define VERIFY_ADDR 0x2000000
+extern int erase_block_flash(int);
+extern int write_data(long lStart, long lCount, uchar * pnData);
+int flash_post_test(int flags)
+{
+	unsigned short *pbuf, *temp;
+	int offset, n, i;
+	int value = 0;
+	int result = 0;
+	printf("\n");
+	pbuf = (unsigned short *)VERIFY_ADDR;
+	temp = pbuf;
+	for (n = FLASH_START_POST_BLOCK; n < FLASH_END_POST_BLOCK; n++) {
+		offset = (n - 7) * BLOCK_SIZE;
+		printf("--------Erase   block:%2d..", n);
+		erase_block_flash(n);
+		printf("OK\r");
+		printf("--------Program block:%2d...", n);
+		write_data(CONFIG_SYS_FLASH_BASE + offset, BLOCK_SIZE, pbuf);
+		printf("OK\r");
+		printf("--------Verify  block:%2d...", n);
+		for (i = 0; i < BLOCK_SIZE; i += 2) {
+			if (*(unsigned short *)(CONFIG_SYS_FLASH_BASE + offset + i) !=
+			    *temp++) {
+				value = 1;
+				result = 1;
+			}
+		}
+		if (value)
+			printf("failed\n");
+		else
+			printf("OK		%3d%%\r",
+			       (int)(
+				     (n + 1 -
+				      FLASH_START_POST_BLOCK) *
+				     100 / (FLASH_END_POST_BLOCK -
+					    FLASH_START_POST_BLOCK)));
+
+		temp = pbuf;
+		value = 0;
+	}
+	printf("\n");
+	if (result)
+		return -1;
+	else
+		return 0;
+}
+
+/****************************************************
+ * LED1 ---- PF6	LED2 ---- PF7		    *
+ * LED3 ---- PF8	LED4 ---- PF9		    *
+ * LED5 ---- PF10	LED6 ---- PF11		    *
+ ****************************************************/
+int led_post_test(int flags)
+{
+	*pPORTF_FER &= ~(PF6 | PF7 | PF8 | PF9 | PF10 | PF11);
+	*pPORTFIO_DIR |= PF6 | PF7 | PF8 | PF9 | PF10 | PF11;
+	*pPORTFIO_INEN &= ~(PF6 | PF7 | PF8 | PF9 | PF10 | PF11);
+	*pPORTFIO &= ~(PF6 | PF7 | PF8 | PF9 | PF10 | PF11);
+	udelay(1000000);
+	printf("LED1 on");
+	*pPORTFIO |= PF6;
+	udelay(1000000);
+	printf("\b\b\b\b\b\b\b");
+	printf("LED2 on");
+	*pPORTFIO |= PF7;
+	udelay(1000000);
+	printf("\b\b\b\b\b\b\b");
+	printf("LED3 on");
+	*pPORTFIO |= PF8;
+	udelay(1000000);
+	printf("\b\b\b\b\b\b\b");
+	printf("LED4 on");
+	*pPORTFIO |= PF9;
+	udelay(1000000);
+	printf("\b\b\b\b\b\b\b");
+	printf("LED5 on");
+	*pPORTFIO |= PF10;
+	udelay(1000000);
+	printf("\b\b\b\b\b\b\b");
+	printf("lED6 on");
+	*pPORTFIO |= PF11;
+	printf("\b\b\b\b\b\b\b ");
+	return 0;
+}
+
+/************************************************
+ *  SW10 ---- PF5	SW11 ---- PF4		*
+ *  SW12 ---- PF3	SW13 ---- PF2		*
+ ************************************************/
+int button_post_test(int flags)
+{
+	int i, delay = 5;
+	unsigned short value = 0;
+	int result = 0;
+
+	*pPORTF_FER &= ~(PF5 | PF4 | PF3 | PF2);
+	*pPORTFIO_DIR &= ~(PF5 | PF4 | PF3 | PF2);
+	*pPORTFIO_INEN |= (PF5 | PF4 | PF3 | PF2);
+
+	printf("\n--------Press SW10: %2d ", delay);
+	while (delay--) {
+		for (i = 0; i < 100; i++) {
+			value = *pPORTFIO & PF5;
+			if (value != 0) {
+				break;
+			}
+			udelay(10000);
+		}
+		printf("\b\b\b%2d ", delay);
+	}
+	if (value != 0)
+		printf("\b\bOK");
+	else {
+		result = -1;
+		printf("\b\bfailed");
+	}
+
+	delay = 5;
+	printf("\n--------Press SW11: %2d ", delay);
+	while (delay--) {
+		for (i = 0; i < 100; i++) {
+			value = *pPORTFIO & PF4;
+			if (value != 0) {
+				break;
+			}
+			udelay(10000);
+		}
+		printf("\b\b\b%2d ", delay);
+	}
+	if (value != 0)
+		printf("\b\bOK");
+	else {
+		result = -1;
+		printf("\b\bfailed");
+	}
+
+	delay = 5;
+	printf("\n--------Press SW12: %2d ", delay);
+	while (delay--) {
+		for (i = 0; i < 100; i++) {
+			value = *pPORTFIO & PF3;
+			if (value != 0) {
+				break;
+			}
+			udelay(10000);
+		}
+		printf("\b\b\b%2d ", delay);
+	}
+	if (value != 0)
+		printf("\b\bOK");
+	else {
+		result = -1;
+		printf("\b\bfailed");
+	}
+
+	delay = 5;
+	printf("\n--------Press SW13: %2d ", delay);
+	while (delay--) {
+		for (i = 0; i < 100; i++) {
+			value = *pPORTFIO & PF2;
+			if (value != 0) {
+				break;
+			}
+			udelay(10000);
+		}
+		printf("\b\b\b%2d ", delay);
+	}
+	if (value != 0)
+		printf("\b\bOK");
+	else {
+		result = -1;
+		printf("\b\bfailed");
+	}
+	printf("\n");
+	return result;
+}
diff --git a/board/bf537-stamp/spi_flash.c b/board/bf537-stamp/spi_flash.c
index 7b764b4..7b753ad 100644
--- a/board/bf537-stamp/spi_flash.c
+++ b/board/bf537-stamp/spi_flash.c
@@ -18,6 +18,7 @@
 #include <malloc.h>
 #include <asm/io.h>
 #include <asm/mach-common/bits/spi.h>
+#include <asm/mach-common/bits/dma.h>
 
 /* Forcibly phase out these */
 #ifdef CONFIG_SPI_FLASH_NUM_SECTORS
@@ -32,53 +33,65 @@
 struct flash_info {
 	char     *name;
 	uint16_t id;
+	uint16_t ext_id;
 	unsigned sector_size;
 	unsigned num_sectors;
 };
 
 /* SPI Speeds: 50 MHz / 33 MHz */
 static struct flash_info flash_spansion_serial_flash[] = {
-	{ "S25FL016", 0x0215, 64 * 1024, 32 },
-	{ "S25FL032", 0x0216, 64 * 1024, 64 },
-	{ "S25FL064", 0x0217, 64 * 1024, 128 },
-	{ "S25FL0128", 0x0218, 256 * 1024, 64 },
-	{ NULL, 0, 0, 0 }
+	{ "S25FL016", 0x0215, 0, 64 * 1024, 32 },
+	{ "S25FL032", 0x0216, 0, 64 * 1024, 64 },
+	{ "S25FL064", 0x0217, 0, 64 * 1024, 128 },
+	{ "S25FL128-00", 0x2018, 0x0301, 64 * 1024, 256 },    /* Package marking FL128PIF */
+	{ "S25FL128-01", 0x2018, 0x0300, 128 * 1024, 64 },    /* Package marking FL128PIFL */
+	{ NULL, 0, 0, 0, 0 }
 };
 
 /* SPI Speeds: 50 MHz / 20 MHz */
 static struct flash_info flash_st_serial_flash[] = {
-	{ "m25p05", 0x2010, 32 * 1024, 2 },
-	{ "m25p10", 0x2011, 32 * 1024, 4 },
-	{ "m25p20", 0x2012, 64 * 1024, 4 },
-	{ "m25p40", 0x2013, 64 * 1024, 8 },
-	{ "m25p16", 0x2015, 64 * 1024, 32 },
-	{ "m25p32", 0x2016, 64 * 1024, 64 },
-	{ "m25p64", 0x2017, 64 * 1024, 128 },
-	{ "m25p128", 0x2018, 256 * 1024, 64 },
-	{ NULL, 0, 0, 0 }
+	{ "m25p05", 0x2010, 0, 32 * 1024, 2 },
+	{ "m25p10", 0x2011, 0, 32 * 1024, 4 },
+	{ "m25p20", 0x2012, 0, 64 * 1024, 4 },
+	{ "m25p40", 0x2013, 0, 64 * 1024, 8 },
+	{ "m25p80", 0x20FF, 0, 64 * 1024, 16 },
+	{ "m25p16", 0x2015, 0, 64 * 1024, 32 },
+	{ "m25p32", 0x2016, 0, 64 * 1024, 64 },
+	{ "m25p64", 0x2017, 0, 64 * 1024, 128 },
+	{ "m25p128", 0x2018, 0, 256 * 1024, 64 },
+	{ NULL, 0, 0, 0, 0 }
+};
+
+/* SPI Speeds: 20 MHz / 40 MHz */
+static struct flash_info flash_sst_serial_flash[] = {
+	{ "SST25WF512", 0x2501, 0, 4 * 1024, 128 },
+	{ "SST25WF010", 0x2502, 0, 4 * 1024, 256 },
+	{ "SST25WF020", 0x2503, 0, 4 * 1024, 512 },
+	{ "SST25WF040", 0x2504, 0, 4 * 1024, 1024 },
+	{ NULL, 0, 0, 0, 0 }
 };
 
 /* SPI Speeds: 66 MHz / 33 MHz */
 static struct flash_info flash_atmel_dataflash[] = {
-	{ "AT45DB011x", 0x0c, 264, 512 },
-	{ "AT45DB021x", 0x14, 264, 1025 },
-	{ "AT45DB041x", 0x1c, 264, 2048 },
-	{ "AT45DB081x", 0x24, 264, 4096 },
-	{ "AT45DB161x", 0x2c, 528, 4096 },
-	{ "AT45DB321x", 0x34, 528, 8192 },
-	{ "AT45DB642x", 0x3c, 1056, 8192 },
-	{ NULL, 0, 0, 0 }
+	{ "AT45DB011x", 0x0c, 0, 264, 512 },
+	{ "AT45DB021x", 0x14, 0, 264, 1025 },
+	{ "AT45DB041x", 0x1c, 0, 264, 2048 },
+	{ "AT45DB081x", 0x24, 0, 264, 4096 },
+	{ "AT45DB161x", 0x2c, 0, 528, 4096 },
+	{ "AT45DB321x", 0x34, 0, 528, 8192 },
+	{ "AT45DB642x", 0x3c, 0, 1056, 8192 },
+	{ NULL, 0, 0, 0, 0 }
 };
 
 /* SPI Speed: 50 MHz / 25 MHz or 40 MHz / 20 MHz */
 static struct flash_info flash_winbond_serial_flash[] = {
-	{ "W25X10", 0x3011, 16 * 256, 32 },
-	{ "W25X20", 0x3012, 16 * 256, 64 },
-	{ "W25X40", 0x3013, 16 * 256, 128 },
-	{ "W25X80", 0x3014, 16 * 256, 256 },
-	{ "W25P80", 0x2014, 256 * 256, 16 },
-	{ "W25P16", 0x2015, 256 * 256, 32 },
-	{ NULL, 0, 0, 0 }
+	{ "W25X10", 0x3011, 0, 16 * 256, 32 },
+	{ "W25X20", 0x3012, 0, 16 * 256, 64 },
+	{ "W25X40", 0x3013, 0, 16 * 256, 128 },
+	{ "W25X80", 0x3014, 0, 16 * 256, 256 },
+	{ "W25P80", 0x2014, 0, 256 * 256, 16 },
+	{ "W25P16", 0x2015, 0, 256 * 256, 32 },
+	{ NULL, 0, 0, 0, 0 }
 };
 
 struct flash_ops {
@@ -97,6 +110,13 @@ static struct flash_ops flash_st_ops = {
 	.status = 0x05,
 };
 
+static struct flash_ops flash_sst_ops = {
+	.read = OP_READ,
+	.write = 0x02,
+	.erase = 0x20,
+	.status = 0x05,
+};
+
 static struct flash_ops flash_atmel_ops = {
 	.read = OP_READ,
 	.write = 0x82,
@@ -122,7 +142,7 @@ static struct {
 	struct manufacturer_info *manufacturer;
 	struct flash_info *flash;
 	struct flash_ops *ops;
-	uint8_t manufacturer_id, device_id1, device_id2;
+	uint8_t manufacturer_id, device_id1, device_id2, device_extid1, device_extid2;
 	unsigned int write_length;
 	unsigned long sector_size, num_sectors;
 } flash;
@@ -130,6 +150,7 @@ static struct {
 enum {
 	JED_MANU_SPANSION = 0x01,
 	JED_MANU_ST       = 0x20,
+	JED_MANU_SST      = 0xBF,
 	JED_MANU_ATMEL    = 0x1F,
 	JED_MANU_WINBOND  = 0xEF,
 };
@@ -148,6 +169,12 @@ static struct manufacturer_info flash_manufacturers[] = {
 		.ops = &flash_st_ops,
 	},
 	{
+		.name = "SST",
+		.id = JED_MANU_SST,
+		.flashes = flash_sst_serial_flash,
+		.ops = &flash_sst_ops,
+	},
+	{
 		.name = "Atmel",
 		.id = JED_MANU_ATMEL,
 		.flashes = flash_atmel_dataflash,
@@ -161,7 +188,7 @@ static struct manufacturer_info flash_manufacturers[] = {
 	},
 };
 
-#define	TIMEOUT	5000	/* timeout of 5 seconds */
+#define TIMEOUT	5000	/* timeout of 5 seconds */
 
 /* If part has multiple SPI flashes, assume SPI0 as that is
  * the one we can boot off of ...
@@ -189,6 +216,7 @@ static void SPI_INIT(void)
 	/* [#3541] This delay appears to be necessary, but not sure
 	 * exactly why as the history behind it is non-existant.
 	 */
+	*pSPI_CTL = 0;
 	udelay(CONFIG_CCLK_HZ / 25000000);
 
 	/* enable SPI pins: SSEL, MOSI, MISO, SCK */
@@ -205,14 +233,13 @@ static void SPI_INIT(void)
 #endif
 
 	/* initate communication upon write of TDBR */
-	*pSPI_CTL = (SPE|MSTR|CPHA|CPOL|0x01);
+	*pSPI_CTL = (SPE | MSTR | CPHA | CPOL | TDBR_CORE);
 	*pSPI_BAUD = CONFIG_SPI_BAUD;
 }
 
 static void SPI_DEINIT(void)
 {
-	/* put SPI settings back to reset state */
-	*pSPI_CTL = 0x0400;
+	*pSPI_CTL = 0;
 	*pSPI_BAUD = 0;
 	SSYNC();
 }
@@ -275,6 +302,7 @@ static int wait_for_ready_status(void)
 		switch (flash.manufacturer_id) {
 		case JED_MANU_SPANSION:
 		case JED_MANU_ST:
+		case JED_MANU_SST:
 		case JED_MANU_WINBOND:
 			if (!(read_status_register() & 0x01))
 				return 0;
@@ -296,19 +324,68 @@ static int wait_for_ready_status(void)
 	return -1;
 }
 
+static int enable_writing(void)
+{
+	ulong start;
+
+	if (flash.manufacturer_id == JED_MANU_ATMEL)
+		return 0;
+
+	/* A write enable instruction must previously have been executed */
+	SPI_ON();
+	spi_write_read_byte(0x06);
+	SPI_OFF();
+
+	/* The status register will be polled to check the write enable latch "WREN" */
+	start = get_timer(0);
+	while (get_timer(0) - start < TIMEOUT) {
+		if (read_status_register() & 0x02)
+			return 0;
+
+		if (ctrlc()) {
+			puts("\nAbort\n");
+			return -1;
+		}
+	}
+
+	puts("Timeout\n");
+	return -1;
+}
+
+static void write_status_register(uint8_t val)
+{
+	if (flash.manufacturer_id != JED_MANU_SST)
+		hang();
+
+	if (enable_writing())
+		return;
+
+	/* send instruction to write status register */
+	SPI_ON();
+	spi_write_read_byte(0x01);
+	/* and clear it! */
+	spi_write_read_byte(val);
+	SPI_OFF();
+}
+
 /* Request and read the manufacturer and device id of parts which
  * are compatible with the JEDEC standard (JEP106) and use that to
  * setup other operating conditions.
  */
 static int spi_detect_part(void)
 {
-	uint16_t dev_id;
+	uint16_t dev_id, dev_extid;
 	size_t i;
 
 	static char called_init;
 	if (called_init)
 		return 0;
 
+#ifdef CONFIG_SPI_FLASH_M25P80
+	flash.manufacturer_id = JED_MANU_ST;
+	flash.device_id1 = 0x20;
+	flash.device_id2 = 0xFF;
+#else
 	SPI_ON();
 
 	/* Send the request for the part identification */
@@ -327,9 +404,15 @@ static int spi_detect_part(void)
 	/* Now read in the second device id byte */
 	flash.device_id2 = spi_write_read_byte(0);
 
+	/* Read extended device ids */
+	flash.device_extid1 = spi_write_read_byte(0);
+	flash.device_extid2 = spi_write_read_byte(0);
+
 	SPI_OFF();
+#endif
 
 	dev_id = (flash.device_id1 << 8) | flash.device_id2;
+	dev_extid = (flash.device_extid1 << 8) | flash.device_extid2;
 
 	for (i = 0; i < ARRAY_SIZE(flash_manufacturers); ++i) {
 		if (flash.manufacturer_id == flash_manufacturers[i].id)
@@ -344,9 +427,12 @@ static int spi_detect_part(void)
 	switch (flash.manufacturer_id) {
 	case JED_MANU_SPANSION:
 	case JED_MANU_ST:
+	case JED_MANU_SST:
 	case JED_MANU_WINBOND:
 		for (i = 0; flash.manufacturer->flashes[i].name; ++i) {
-			if (dev_id == flash.manufacturer->flashes[i].id)
+			if (dev_id == flash.manufacturer->flashes[i].id &&
+			    (flash.manufacturer->flashes[i].ext_id == 0 ||
+			     flash.manufacturer->flashes[i].ext_id == dev_extid))
 				break;
 		}
 		if (!flash.manufacturer->flashes[i].name)
@@ -355,7 +441,11 @@ static int spi_detect_part(void)
 		flash.flash = &flash.manufacturer->flashes[i];
 		flash.sector_size = flash.flash->sector_size;
 		flash.num_sectors = flash.flash->num_sectors;
-		flash.write_length = 256;
+
+		if (flash.manufacturer_id == JED_MANU_SST)
+			flash.write_length = 1; /* pwnt :( */
+		else
+			flash.write_length = 256;
 		break;
 
 	case JED_MANU_ATMEL: {
@@ -381,6 +471,10 @@ static int spi_detect_part(void)
 	}
 	}
 
+	/* the SST parts power up with software protection enabled by default */
+	if (flash.manufacturer_id == JED_MANU_SST)
+		write_status_register(0);
+
 	called_init = 1;
 	return 0;
 
@@ -538,9 +632,10 @@ static void transmit_address(uint32_t addr)
  *			int pnData - pointer to store value read from flash
  *			long lCount - number of elements to read
  */
+#ifdef CONFIG_SPI_READFLASH_NODMA
 static int read_flash(unsigned long address, long count, uchar *buffer)
 {
-	size_t i;
+	size_t i, j;
 
 	/* Send the read command to SPI device */
 	SPI_ON();
@@ -554,44 +649,134 @@ static int read_flash(unsigned long address, long count, uchar *buffer)
 
 	/* After the SPI device address has been placed on the MOSI pin the data can be */
 	/* received on the MISO pin. */
+	j = flash.sector_size << 1;
 	for (i = 1; i <= count; ++i) {
 		*buffer++ = spi_write_read_byte(0);
-		if (i % flash.sector_size == 0)
+		if (!j--) {
 			puts(".");
+			j = flash.sector_size;
+		}
 	}
 
 	SPI_OFF();
 
 	return 0;
 }
+#else
 
-static int enable_writing(void)
+#ifdef __ADSPBF54x__
+#define bfin_write_DMA_SPI_IRQ_STATUS     bfin_write_DMA4_IRQ_STATUS
+#define bfin_read_DMA_SPI_IRQ_STATUS      bfin_read_DMA4_IRQ_STATUS
+#define bfin_write_DMA_SPI_CURR_DESC_PTR  bfin_write_DMA4_CURR_DESC_PTR
+#define bfin_write_DMA_SPI_CONFIG         bfin_write_DMA4_CONFIG
+#elif defined(__ADSPBF533__) || defined(__ADSPBF532__) || defined(__ADSPBF531__) || \
+      defined(__ADSPBF538__) || defined(__ADSPBF539__)
+#define bfin_write_DMA_SPI_IRQ_STATUS     bfin_write_DMA5_IRQ_STATUS
+#define bfin_read_DMA_SPI_IRQ_STATUS      bfin_read_DMA5_IRQ_STATUS
+#define bfin_write_DMA_SPI_CURR_DESC_PTR  bfin_write_DMA5_CURR_DESC_PTR
+#define bfin_write_DMA_SPI_CONFIG         bfin_write_DMA5_CONFIG
+#elif defined(__ADSPBF561__)
+#define bfin_write_DMA_SPI_IRQ_STATUS     bfin_write_DMA16_IRQ_STATUS
+#define bfin_read_DMA_SPI_IRQ_STATUS      bfin_read_DMA16_IRQ_STATUS
+#define bfin_write_DMA_SPI_CURR_DESC_PTR  bfin_write_DMA16_CURR_DESC_PTR
+#define bfin_write_DMA_SPI_CONFIG         bfin_write_DMA16_CONFIG
+#elif defined(__ADSPBF537__) || defined(__ADSPBF536__) || defined(__ADSPBF534__) || \
+      defined(__ADSPBF52x__) || defined(__ADSPBF51x__)
+#define bfin_write_DMA_SPI_IRQ_STATUS     bfin_write_DMA7_IRQ_STATUS
+#define bfin_read_DMA_SPI_IRQ_STATUS      bfin_read_DMA7_IRQ_STATUS
+#define bfin_write_DMA_SPI_CURR_DESC_PTR  bfin_write_DMA7_CURR_DESC_PTR
+#define bfin_write_DMA_SPI_CONFIG         bfin_write_DMA7_CONFIG
+#else
+#error "Please provide SPI DMA channel defines"
+#endif
+
+struct dmadesc_array {
+	unsigned long start_addr;
+	unsigned short cfg;
+	unsigned short x_count;
+	short x_modify;
+	unsigned short y_count;
+	short y_modify;
+} __attribute__((packed));
+
+/*
+ * Read a value from flash for verify purpose
+ * Inputs:	unsigned long ulStart - holds the SPI start address
+ *			int pnData - pointer to store value read from flash
+ *			long lCount - number of elements to read
+ */
+
+static int read_flash(unsigned long address, long count, uchar *buffer)
 {
-	ulong start;
+	unsigned int ndsize;
+	struct dmadesc_array dma[2];
+	/* Send the read command to SPI device */
 
-	if (flash.manufacturer_id == JED_MANU_ATMEL)
+	if (!count)
 		return 0;
 
-	/* A write enable instruction must previously have been executed */
+	dma[0].start_addr = (unsigned long)buffer;
+	dma[0].x_modify = 1;
+	if (count <= 65536) {
+		blackfin_dcache_flush_invalidate_range(buffer, buffer + count);
+		ndsize = NDSIZE_5;
+		dma[0].cfg = NDSIZE_0 | WNR | WDSIZE_8 | FLOW_STOP | DMAEN | DI_EN;
+		dma[0].x_count = count;
+	} else {
+		blackfin_dcache_flush_invalidate_range(buffer, buffer + 65536 - 1);
+		ndsize = NDSIZE_7;
+		dma[0].cfg = NDSIZE_5 | WNR | WDSIZE_8 | FLOW_ARRAY | DMAEN | DMA2D;
+		dma[0].x_count = 0;	/* 2^16 */
+		dma[0].y_count = count >> 16;	/* count / 2^16 */
+		dma[0].y_modify = 1;
+		dma[1].start_addr = (unsigned long)(buffer + (count & ~0xFFFF));
+		dma[1].cfg = NDSIZE_0 | WNR | WDSIZE_8 | FLOW_STOP | DMAEN | DI_EN;
+		dma[1].x_count = count & 0xFFFF; /* count % 2^16 */
+		dma[1].x_modify = 1;
+	}
+
+	bfin_write_DMA_SPI_CONFIG(0);
+	bfin_write_DMA_SPI_IRQ_STATUS(DMA_DONE | DMA_ERR);
+	bfin_write_DMA_SPI_CURR_DESC_PTR(dma);
+
 	SPI_ON();
-	spi_write_read_byte(0x06);
+
+	spi_write_read_byte(flash.ops->read);
+	transmit_address(address);
+
+#ifndef CONFIG_SPI_FLASH_SLOW_READ
+	/* Send dummy byte when doing SPI fast reads */
+	spi_write_read_byte(0);
+#endif
+
+	bfin_write_DMA_SPI_CONFIG(ndsize | FLOW_ARRAY | DMAEN);
+	*pSPI_CTL = (MSTR | CPHA | CPOL | RDBR_DMA | SPE | SZ);
+	SSYNC();
+
+	/*
+	 * We already invalidated the first 64k,
+	 * now while we just wait invalidate the remaining part.
+	 * Its not likely that the DMA is going to overtake
+	 */
+	if (count > 65536)
+		blackfin_dcache_flush_invalidate_range(buffer + 65536,
+							 buffer + count);
+
+	while (!(bfin_read_DMA_SPI_IRQ_STATUS() & DMA_DONE))
+		if (ctrlc())
+			break;
+
 	SPI_OFF();
 
-	/* The status register will be polled to check the write enable latch "WREN" */
-	start = get_timer(0);
-	while (get_timer(0) - start < TIMEOUT) {
-		if (read_status_register() & 0x02)
-			return 0;
+	*pSPI_CTL = 0;
 
-		if (ctrlc()) {
-			puts("\nAbort\n");
-			return -1;
-		}
-	}
+	bfin_write_DMA_SPI_CONFIG(0);
 
-	puts("Timeout\n");
-	return -1;
+	*pSPI_CTL = (SPE | MSTR | CPHA | CPOL | TDBR_CORE);
+
+	return 0;
 }
+#endif
 
 static long address_to_sector(unsigned long address)
 {
diff --git a/board/bf537-stamp/u-boot.lds.S b/board/bf537-stamp/u-boot.lds.S
index 76daa75..8ddfa81 100644
--- a/board/bf537-stamp/u-boot.lds.S
+++ b/board/bf537-stamp/u-boot.lds.S
@@ -44,12 +44,11 @@
 
 OUTPUT_ARCH(bfin)
 
-/* The 0xC offset is so we don't clobber the tiny LDR jump block. */
 MEMORY
 {
 	ram     : ORIGIN = CONFIG_SYS_MONITOR_BASE, LENGTH = CONFIG_SYS_MONITOR_LEN
-	l1_code : ORIGIN = L1_INST_SRAM+0xC, LENGTH = L1_INST_SRAM_SIZE
-	l1_data : ORIGIN = L1_DATA_B_SRAM,   LENGTH = L1_DATA_B_SRAM_SIZE
+	l1_code : ORIGIN = L1_INST_SRAM,            LENGTH = L1_INST_SRAM_SIZE
+	l1_data : ORIGIN = L1_DATA_B_SRAM,          LENGTH = L1_DATA_B_SRAM_SIZE
 }
 
 ENTRY(_start)
diff --git a/board/bf561-ezkit/u-boot.lds.S b/board/bf561-ezkit/u-boot.lds.S
index 3d0453e..4220e81 100644
--- a/board/bf561-ezkit/u-boot.lds.S
+++ b/board/bf561-ezkit/u-boot.lds.S
@@ -44,12 +44,11 @@
 
 OUTPUT_ARCH(bfin)
 
-/* The 0xC offset is so we don't clobber the tiny LDR jump block. */
 MEMORY
 {
 	ram     : ORIGIN = CONFIG_SYS_MONITOR_BASE, LENGTH = CONFIG_SYS_MONITOR_LEN
-	l1_code : ORIGIN = L1_INST_SRAM+0xC, LENGTH = L1_INST_SRAM_SIZE
-	l1_data : ORIGIN = L1_DATA_B_SRAM,   LENGTH = L1_DATA_B_SRAM_SIZE
+	l1_code : ORIGIN = L1_INST_SRAM,            LENGTH = L1_INST_SRAM_SIZE
+	l1_data : ORIGIN = L1_DATA_B_SRAM,          LENGTH = L1_DATA_B_SRAM_SIZE
 }
 
 ENTRY(_start)
diff --git a/cpu/blackfin/cpu.c b/cpu/blackfin/cpu.c
index 30c214b..c2ff8cd 100644
--- a/cpu/blackfin/cpu.c
+++ b/cpu/blackfin/cpu.c
@@ -25,18 +25,12 @@ ulong bfin_poweron_retx;
 __attribute__ ((__noreturn__))
 void cpu_init_f(ulong bootflag, ulong loaded_from_ldr)
 {
-	/* Build a NOP slide over the LDR jump block.  Whee! */
-	serial_early_puts("NOP Slide\n");
-	char nops[0xC];
-	memset(nops, 0x00, sizeof(nops));
-	extern char _stext_l1;
-	memcpy(&_stext_l1 - sizeof(nops), nops, sizeof(nops));
-
 	if (!loaded_from_ldr) {
 		/* Relocate sections into L1 if the LDR didn't do it -- don't
 		 * check length because the linker script does the size
 		 * checking at build time.
 		 */
+		extern char _stext_l1;
 		serial_early_puts("L1 Relocate\n");
 		extern char _stext_l1, _etext_l1, _stext_l1_lma;
 		memcpy(&_stext_l1, &_stext_l1_lma, (&_etext_l1 - &_stext_l1));
diff --git a/cpu/blackfin/initcode.c b/cpu/blackfin/initcode.c
index 3f3b479..7bd4b22 100644
--- a/cpu/blackfin/initcode.c
+++ b/cpu/blackfin/initcode.c
@@ -12,6 +12,7 @@
 #include <config.h>
 #include <asm/blackfin.h>
 #include <asm/mach-common/bits/bootrom.h>
+#include <asm/mach-common/bits/core.h>
 #include <asm/mach-common/bits/ebiu.h>
 #include <asm/mach-common/bits/pll.h>
 #include <asm/mach-common/bits/uart.h>
@@ -203,6 +204,48 @@ static inline void serial_putc(char c)
 # define CONFIG_VR_CTL_VAL (CONFIG_VR_CTL_CLKBUF | CONFIG_VR_CTL_VLEV | CONFIG_VR_CTL_FREQ)
 #endif
 
+/* some parts do not have an on-chip voltage regulator */
+#if defined(__ADSPBF51x__)
+# define CONFIG_HAS_VR 0
+# undef CONFIG_VR_CTL_VAL
+# define CONFIG_VR_CTL_VAL 0
+#else
+# define CONFIG_HAS_VR 1
+#endif
+
+#ifndef EBIU_RSTCTL
+/* Blackfin with SDRAM */
+#ifndef CONFIG_EBIU_SDBCTL_VAL
+# if CONFIG_MEM_SIZE == 16
+#  define CONFIG_EBSZ_VAL EBSZ_16
+# elif CONFIG_MEM_SIZE == 32
+#  define CONFIG_EBSZ_VAL EBSZ_32
+# elif CONFIG_MEM_SIZE == 64
+#  define CONFIG_EBSZ_VAL EBSZ_64
+# elif CONFIG_MEM_SIZE == 128
+#  define CONFIG_EBSZ_VAL EBSZ_128
+# elif CONFIG_MEM_SIZE == 256
+#  define CONFIG_EBSZ_VAL EBSZ_256
+# elif CONFIG_MEM_SIZE == 512
+#  define CONFIG_EBSZ_VAL EBSZ_512
+# else
+#  error You need to define CONFIG_EBIU_SDBCTL_VAL or CONFIG_MEM_SIZE
+# endif
+# if CONFIG_MEM_ADD_WDTH == 8
+#  define CONFIG_EBCAW_VAL EBCAW_8
+# elif CONFIG_MEM_ADD_WDTH == 9
+#  define CONFIG_EBCAW_VAL EBCAW_9
+# elif CONFIG_MEM_ADD_WDTH == 10
+#  define CONFIG_EBCAW_VAL EBCAW_10
+# elif CONFIG_MEM_ADD_WDTH == 11
+#  define CONFIG_EBCAW_VAL EBCAW_11
+# else
+#  error You need to define CONFIG_EBIU_SDBCTL_VAL or CONFIG_MEM_ADD_WDTH
+# endif
+# define CONFIG_EBIU_SDBCTL_VAL (CONFIG_EBCAW_VAL | CONFIG_EBSZ_VAL | EBE)
+#endif
+#endif
+
 BOOTROM_CALLED_FUNC_ATTR
 void initcode(ADI_BOOT_DATA *bootstruct)
 {
@@ -215,6 +258,8 @@ void initcode(ADI_BOOT_DATA *bootstruct)
 		divB = serial_early_get_div();
 	}
 
+	serial_putc('A');
+
 #ifdef CONFIG_HW_WATCHDOG
 # ifndef CONFIG_HW_WATCHDOG_TIMEOUT_INITCODE
 #  define CONFIG_HW_WATCHDOG_TIMEOUT_INITCODE 20000
@@ -231,7 +276,23 @@ void initcode(ADI_BOOT_DATA *bootstruct)
 	}
 #endif
 
-	serial_putc('S');
+	serial_putc('B');
+
+	/* If external memory is enabled, put it into self refresh first. */
+	bool put_into_srfs = false;
+#ifdef EBIU_RSTCTL
+	if (bfin_read_EBIU_RSTCTL() & DDR_SRESET) {
+		bfin_write_EBIU_RSTCTL(bfin_read_EBIU_RSTCTL() | SRREQ);
+		put_into_srfs = true;
+	}
+#else
+	if (bfin_read_EBIU_SDBCTL() & EBE) {
+		bfin_write_EBIU_SDGCTL(bfin_read_EBIU_SDGCTL() | SRFS);
+		put_into_srfs = true;
+	}
+#endif
+
+	serial_putc('C');
 
 	/* Blackfin bootroms use the SPI slow read opcode instead of the SPI
 	 * fast read, so we need to slow down the SPI clock a lot more during
@@ -244,54 +305,81 @@ void initcode(ADI_BOOT_DATA *bootstruct)
 		bfin_write_SPI_BAUD(CONFIG_SPI_BAUD_INITBLOCK);
 	}
 
-	serial_putc('B');
+	serial_putc('D');
 
-	/* Disable all peripheral wakeups except for the PLL event. */
-#ifdef SIC_IWR0
-	bfin_write_SIC_IWR0(1);
-	bfin_write_SIC_IWR1(0);
-# ifdef SIC_IWR2
-	bfin_write_SIC_IWR2(0);
-# endif
-#elif defined(SICA_IWR0)
-	bfin_write_SICA_IWR0(1);
-	bfin_write_SICA_IWR1(0);
+	/* If we're entering self refresh, make sure it has happened. */
+	if (put_into_srfs)
+#ifdef EBIU_RSTCTL
+		while (!(bfin_read_EBIU_RSTCTL() & SRACK))
 #else
-	bfin_write_SIC_IWR(1);
+		while (!(bfin_read_EBIU_SDSTAT() & SDSRA))
 #endif
+			continue;
+
+	serial_putc('E');
 
 	/* With newer bootroms, we use the helper function to set up
 	 * the memory controller.  Older bootroms lacks such helpers
 	 * so we do it ourselves.
 	 */
-#define BOOTROM_CAPS_SYSCONTROL 0
-	if (BOOTROM_CAPS_SYSCONTROL) {
-		serial_putc('S');
+	uint16_t vr_ctl = bfin_read_VR_CTL();
+	if (!ANOMALY_05000386) {
+		serial_putc('F');
 
 		ADI_SYSCTRL_VALUES memory_settings;
-		memory_settings.uwVrCtl = CONFIG_VR_CTL_VAL;
+		uint32_t actions = SYSCTRL_WRITE | SYSCTRL_PLLCTL | SYSCTRL_PLLDIV | SYSCTRL_LOCKCNT;
+		if (CONFIG_HAS_VR) {
+			actions |= SYSCTRL_VRCTL;
+			if (CONFIG_VR_CTL_VAL & FREQ_MASK)
+				actions |= SYSCTRL_INTVOLTAGE;
+			else
+				actions |= SYSCTRL_EXTVOLTAGE;
+			memory_settings.uwVrCtl = CONFIG_VR_CTL_VAL;
+		} else
+			actions |= SYSCTRL_EXTVOLTAGE;
 		memory_settings.uwPllCtl = CONFIG_PLL_CTL_VAL;
 		memory_settings.uwPllDiv = CONFIG_PLL_DIV_VAL;
 		memory_settings.uwPllLockCnt = CONFIG_PLL_LOCKCNT_VAL;
-		syscontrol(SYSCTRL_WRITE | SYSCTRL_VRCTL | SYSCTRL_PLLCTL | SYSCTRL_PLLDIV | SYSCTRL_LOCKCNT |
-			(CONFIG_VR_CTL_VAL & FREQ_MASK ? SYSCTRL_INTVOLTAGE : SYSCTRL_EXTVOLTAGE), &memory_settings, NULL);
+#if ANOMALY_05000432
+		bfin_write_SIC_IWR1(0);
+#endif
+		bfrom_SysControl(actions, &memory_settings, NULL);
+#if ANOMALY_05000432
+		bfin_write_SIC_IWR1(-1);
+#endif
 	} else {
-		serial_putc('L');
+		serial_putc('G');
+
+		/* Disable all peripheral wakeups except for the PLL event. */
+#ifdef SIC_IWR0
+		bfin_write_SIC_IWR0(1);
+		bfin_write_SIC_IWR1(0);
+# ifdef SIC_IWR2
+		bfin_write_SIC_IWR2(0);
+# endif
+#elif defined(SICA_IWR0)
+		bfin_write_SICA_IWR0(1);
+		bfin_write_SICA_IWR1(0);
+#else
+		bfin_write_SIC_IWR(1);
+#endif
+
+		serial_putc('H');
 
 		bfin_write_PLL_LOCKCNT(CONFIG_PLL_LOCKCNT_VAL);
 
-		serial_putc('A');
+		serial_putc('I');
 
 		/* Only reprogram when needed to avoid triggering unnecessary
 		 * PLL relock sequences.
 		 */
-		if (bfin_read_VR_CTL() != CONFIG_VR_CTL_VAL) {
+		if (vr_ctl != CONFIG_VR_CTL_VAL) {
 			serial_putc('!');
 			bfin_write_VR_CTL(CONFIG_VR_CTL_VAL);
 			asm("idle;");
 		}
 
-		serial_putc('C');
+		serial_putc('J');
 
 		bfin_write_PLL_DIV(CONFIG_PLL_DIV_VAL);
 
@@ -305,8 +393,26 @@ void initcode(ADI_BOOT_DATA *bootstruct)
 			bfin_write_PLL_CTL(CONFIG_PLL_CTL_VAL);
 			asm("idle;");
 		}
+
+		serial_putc('L');
+
+		/* Restore all peripheral wakeups. */
+#ifdef SIC_IWR0
+		bfin_write_SIC_IWR0(-1);
+		bfin_write_SIC_IWR1(-1);
+# ifdef SIC_IWR2
+		bfin_write_SIC_IWR2(-1);
+# endif
+#elif defined(SICA_IWR0)
+		bfin_write_SICA_IWR0(-1);
+		bfin_write_SICA_IWR1(-1);
+#else
+		bfin_write_SIC_IWR(-1);
+#endif
 	}
 
+	serial_putc('M');
+
 	/* Since we've changed the SCLK above, we may need to update
 	 * the UART divisors (UART baud rates are based on SCLK).
 	 * Do the division by hand as there are no native instructions
@@ -324,23 +430,32 @@ void initcode(ADI_BOOT_DATA *bootstruct)
 		serial_early_put_div(quotient - ANOMALY_05000230);
 	}
 
-	serial_putc('F');
+	serial_putc('N');
 
-	/* Program the async banks controller. */
-	bfin_write_EBIU_AMBCTL0(CONFIG_EBIU_AMBCTL0_VAL);
-	bfin_write_EBIU_AMBCTL1(CONFIG_EBIU_AMBCTL1_VAL);
-	bfin_write_EBIU_AMGCTL(CONFIG_EBIU_AMGCTL_VAL);
+	/* Program the external memory controller before we come out of
+	 * self-refresh.  This only works with our SDRAM controller.
+	 */
+#ifndef EBIU_RSTCTL
+	bfin_write_EBIU_SDRRC(CONFIG_EBIU_SDRRC_VAL);
+	bfin_write_EBIU_SDBCTL(CONFIG_EBIU_SDBCTL_VAL);
+	bfin_write_EBIU_SDGCTL(CONFIG_EBIU_SDGCTL_VAL);
+#endif
 
-#ifdef EBIU_MODE
-	/* Not all parts have these additional MMRs. */
-	bfin_write_EBIU_MBSCTL(CONFIG_EBIU_MBSCTL_VAL);
-	bfin_write_EBIU_MODE(CONFIG_EBIU_MODE_VAL);
-	bfin_write_EBIU_FCTL(CONFIG_EBIU_FCTL_VAL);
+	serial_putc('O');
+
+	/* Now that we've reprogrammed, take things out of self refresh. */
+	if (put_into_srfs)
+#ifdef EBIU_RSTCTL
+		bfin_write_EBIU_RSTCTL(bfin_read_EBIU_RSTCTL() & ~(SRREQ));
+#else
+		bfin_write_EBIU_SDGCTL(bfin_read_EBIU_SDGCTL() & ~(SRFS));
 #endif
 
-	serial_putc('I');
+	serial_putc('P');
 
-	/* Program the external memory controller. */
+	/* Our DDR controller sucks and cannot be programmed while in
+	 * self-refresh.  So we have to pull it out before programming.
+	 */
 #ifdef EBIU_RSTCTL
 	bfin_write_EBIU_RSTCTL(bfin_read_EBIU_RSTCTL() | 0x1 /*DDRSRESET*/ | CONFIG_EBIU_RSTCTL_VAL);
 	bfin_write_EBIU_DDRCTL0(CONFIG_EBIU_DDRCTL0_VAL);
@@ -350,28 +465,64 @@ void initcode(ADI_BOOT_DATA *bootstruct)
 	/* default is disable, so don't need to force this */
 	bfin_write_EBIU_DDRCTL3(CONFIG_EBIU_DDRCTL3_VAL);
 # endif
-#else
-	bfin_write_EBIU_SDRRC(CONFIG_EBIU_SDRRC_VAL);
-	bfin_write_EBIU_SDBCTL(CONFIG_EBIU_SDBCTL_VAL);
-	bfin_write_EBIU_SDGCTL(CONFIG_EBIU_SDGCTL_VAL);
+# ifdef CONFIG_EBIU_DDRQUE_VAL
+	bfin_write_EBIU_DDRQUE(bfin_read_EBIU_DDRQUE() | CONFIG_EBIU_DDRQUE_VAL);
+# endif
 #endif
 
-	serial_putc('N');
+	serial_putc('Q');
 
-	/* Restore all peripheral wakeups. */
-#ifdef SIC_IWR0
-	bfin_write_SIC_IWR0(-1);
-	bfin_write_SIC_IWR1(-1);
-# ifdef SIC_IWR2
-	bfin_write_SIC_IWR2(-1);
-# endif
-#elif defined(SICA_IWR0)
-	bfin_write_SICA_IWR0(-1);
-	bfin_write_SICA_IWR1(-1);
-#else
-	bfin_write_SIC_IWR(-1);
+	/* Are we coming out of hibernate (suspend to memory) ?
+	 * The memory layout is:
+	 * 0x0: hibernate magic for anomaly 307 (0xDEADBEEF)
+	 * 0x4: return address
+	 * 0x8: stack pointer
+	 *
+	 * SCKELOW is unreliable on older parts (anomaly 307)
+	 */
+	if (ANOMALY_05000307 || vr_ctl & 0x8000) {
+		uint32_t *hibernate_magic = 0;
+		__builtin_bfin_ssync(); /* make sure memory controller is done */
+		if (hibernate_magic[0] == 0xDEADBEEF) {
+			serial_putc('R');
+			bfin_write_EVT15(hibernate_magic[1]);
+			bfin_write_IMASK(EVT_IVG15);
+			__asm__ __volatile__ (
+				/* load reti early to avoid anomaly 281 */
+				"reti = %0;"
+				/* clear hibernate magic */
+				"[%0] = %1;"
+				/* load stack pointer */
+				"SP = [%0 + 8];"
+				/* lower ourselves from reset ivg to ivg15 */
+				"raise 15;"
+				"rti;"
+				:
+				: "p"(hibernate_magic), "d"(0x2000 /* jump.s 0 */)
+			);
+		}
+	}
+
+	serial_putc('S');
+
+	/* Program the async banks controller. */
+	bfin_write_EBIU_AMBCTL0(CONFIG_EBIU_AMBCTL0_VAL);
+	bfin_write_EBIU_AMBCTL1(CONFIG_EBIU_AMBCTL1_VAL);
+	bfin_write_EBIU_AMGCTL(CONFIG_EBIU_AMGCTL_VAL);
+
+#ifdef EBIU_MODE
+	/* Not all parts have these additional MMRs. */
+	bfin_write_EBIU_MBSCTL(CONFIG_EBIU_MBSCTL_VAL);
+	bfin_write_EBIU_MODE(CONFIG_EBIU_MODE_VAL);
+	bfin_write_EBIU_FCTL(CONFIG_EBIU_FCTL_VAL);
 #endif
 
+	serial_putc('T');
+
+	/* tell the bootrom where our entry point is */
+	if (CONFIG_BFIN_BOOT_MODE != BFIN_BOOT_BYPASS)
+		bfin_write_EVT1(CONFIG_SYS_MONITOR_BASE);
+
 	serial_putc('>');
 	serial_putc('\n');
 
diff --git a/cpu/blackfin/jtag-console.c b/cpu/blackfin/jtag-console.c
index 44c0a83..d58582f 100644
--- a/cpu/blackfin/jtag-console.c
+++ b/cpu/blackfin/jtag-console.c
@@ -54,16 +54,23 @@ static void jtag_puts(const char *s)
 	jtag_send(s, strlen(s));
 }
 
-static int jtag_tstc(void)
+static size_t inbound_len, leftovers_len;
+
+/* Lower layers want to know when jtag has data */
+static int jtag_tstc_dbg(void)
 {
 	return (bfin_read_DBGSTAT() & 0x2);
 }
 
+/* Higher layers want to know when any data is available */
+static int jtag_tstc(void)
+{
+	return jtag_tstc_dbg() || leftovers_len;
+}
+
 /* Receive a buffer.  The format is:
  * [32bit length][actual data]
  */
-static size_t inbound_len;
-static int leftovers_len;
 static uint32_t leftovers;
 static int jtag_getc(void)
 {
@@ -79,7 +86,7 @@ static int jtag_getc(void)
 	}
 
 	/* wait for new data ! */
-	while (!jtag_tstc())
+	while (!jtag_tstc_dbg())
 		continue;
 	__asm__("%0 = emudat;" : "=d"(emudat));
 
diff --git a/cpu/blackfin/reset.c b/cpu/blackfin/reset.c
index 284cea5..e3be740 100644
--- a/cpu/blackfin/reset.c
+++ b/cpu/blackfin/reset.c
@@ -20,7 +20,7 @@
  * the core reset.
  */
 __attribute__ ((__l1_text__, __noreturn__))
-void bfin_reset(void)
+static void bfin_reset(void)
 {
 	/* Wait for completion of "system" events such as cache line
 	 * line fills so that we avoid infinite stalls later on as
diff --git a/cpu/blackfin/start.S b/cpu/blackfin/start.S
index 6c8def4..506fea5 100644
--- a/cpu/blackfin/start.S
+++ b/cpu/blackfin/start.S
@@ -95,36 +95,64 @@ ENTRY(_start)
 	/* Save RETX so we can pass it while booting Linux */
 	r7 = RETX;
 
-#if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_BYPASS)
-	/* In bypass mode, we don't have an LDR with an init block
-	 * so we need to explicitly call it ourselves.  This will
-	 * reprogram our clocks and setup our async banks.
-	 */
-	/* XXX: we should DMA this into L1, put external memory into
-	 *      self refresh, and then jump there ...
+	/* Figure out where we are currently executing so that we can decide
+	 * how to best reprogram and relocate things.  We'll pass below:
+	 *  R4: load address of _start
+	 *  R5: current (not load) address of _start
 	 */
+	serial_early_puts("Find ourselves");
+
 	call _get_pc;
-	r3 = 0x0;
-	r3.h = 0x2000;
-	cc = r0 < r3 (iu);
-	if cc jump .Lproc_initialized;
+.Loffset:
+	r1.l = .Loffset;
+	r1.h = .Loffset;
+	r4.l = _start;
+	r4.h = _start;
+	r3 = r1 - r4;
+	r5 = r0 - r3;
+
+	/* Inform upper layers if we had to do the relocation ourselves.
+	 * This allows us to detect whether we were loaded by 'go 0x1000'
+	 * or by the bootrom from an LDR.  "R6" is "loaded_from_ldr".
+	 */
+	r6 = 1 (x);
+	cc = r4 == r5;
+	if cc jump .Lnorelocate;
+	r6 = 0 (x);
 
+	/* In bypass mode, we don't have an LDR with an init block
+	 * so we need to explicitly call it ourselves.  This will
+	 * reprogram our clocks, memory, and setup our async banks.
+	 */
 	serial_early_puts("Program Clocks");
 
+	/* if we're executing >=0x20000000, then we dont need to dma */
+	r3 = 0x0;
+	r3.h = 0x2000;
+	cc = r5 < r3 (iu);
+	if cc jump .Ldma_and_reprogram;
 	call _initcode;
+	jump .Lprogrammed;
+
+	/* we're sitting in external memory, so dma into L1 and reprogram */
+.Ldma_and_reprogram:
+	r0.l = LO(L1_INST_SRAM);
+	r0.h = HI(L1_INST_SRAM);
+	r1.l = __initcode_start;
+	r1.h = __initcode_start;
+	r2.l = __initcode_end;
+	r2.h = __initcode_end;
+	r2 = r2 - r1;	/* convert r2 into length of initcode */
+	r1 = r1 - r4;	/* convert r1 from load address of initcode ... */
+	r1 = r1 + r5;	/* ... to current (not load) address of initcode */
+	p3 = r0;
+	call _dma_memcpy_nocache;
+	call (p3);
 
 	/* Since we reprogrammed SCLK, we need to update the serial divisor */
+.Lprogrammed:
 	serial_early_set_baud
 
-.Lproc_initialized:
-#endif
-
-	/* Inform upper layers if we had to do the relocation ourselves.
-	 * This allows us to detect whether we were loaded by 'go 0x1000'
-	 * or by the bootrom from an LDR.  "r6" is "loaded_from_ldr".
-	 */
-	r6 = 1 (x);
-
 	/* Relocate from wherever we are (FLASH/RAM/etc...) to the hardcoded
 	 * monitor location in the end of RAM.  We know that memcpy() only
 	 * uses registers, so it is safe to call here.  Note that this only
@@ -132,19 +160,8 @@ ENTRY(_start)
 	 * it yet (see "lower to 15" below).
 	 */
 	serial_early_puts("Relocate");
-	call _get_pc;
-.Loffset:
-	r2.l = .Loffset;
-	r2.h = .Loffset;
-	r3.l = _start;
-	r3.h = _start;
-	r2 = r2 - r3;
-	r1 = r0 - r2;
-	cc = r1 == r3;
-	if cc jump .Lnorelocate;
-	r6 = 0 (x);
-
-	r0 = r3;
+	r0 = r4;
+	r1 = r5;
 	r2.l = LO(CONFIG_SYS_MONITOR_LEN);
 	r2.h = HI(CONFIG_SYS_MONITOR_LEN);
 	call _memcpy_ASM;
diff --git a/cpu/blackfin/traps.c b/cpu/blackfin/traps.c
index a2c6f1e..2121b0e 100644
--- a/cpu/blackfin/traps.c
+++ b/cpu/blackfin/traps.c
@@ -193,7 +193,7 @@ static const char *symbol_lookup(unsigned long addr, unsigned long *caddr)
 
 	while (*sym) {
 		sym_addr = simple_strtoul(sym, &esym, 16);
-		sym = esym + 1;
+		sym = esym;
 		if (sym_addr > addr)
 			break;
 		*caddr = sym_addr;
diff --git a/drivers/spi/bfin_spi.c b/drivers/spi/bfin_spi.c
index d22862a..0472c1a 100644
--- a/drivers/spi/bfin_spi.c
+++ b/drivers/spi/bfin_spi.c
@@ -191,21 +191,19 @@ static void spi_portmux(struct spi_slave *slave)
 #elif defined(__ADSPBF534__) || defined(__ADSPBF536__) || defined(__ADSPBF537__)
 	u16 mux = bfin_read_PORT_MUX();
 	u16 f_fer = bfin_read_PORTF_FER();
-	u16 j_fer = bfin_read_PORTJ_FER();
 	/* set SCK/MISO/MOSI */
 	f_fer |= PF11 | PF12 | PF13;
 	switch (slave->cs) {
 		case 1: f_fer |= PF10; break;
-		case 2: mux |= PJSE; j_fer |= PJ11; break;
-		case 3: mux |= PJSE; j_fer |= PJ10; break;
+		case 2: mux |= PJSE; break;
+		case 3: mux |= PJSE; break;
 		case 4: mux |= PFS4E; f_fer |= PF6; break;
 		case 5: mux |= PFS5E; f_fer |= PF5; break;
 		case 6: mux |= PFS6E; f_fer |= PF4; break;
-		case 7: mux |= PJCE_SPI; j_fer |= PJ5; break;
+		case 7: mux |= PJCE_SPI; break;
 	}
 	bfin_write_PORT_MUX(mux);
 	bfin_write_PORTF_FER(f_fer);
-	bfin_write_PORTJ_FER(j_fer);
 #elif defined(__ADSPBF54x__)
 #define DO_MUX(port, pin) \
 	mux = ((mux & ~PORT_x_MUX_##pin##_MASK) | PORT_x_MUX_##pin##_FUNC_1); \
diff --git a/include/asm-blackfin/blackfin-config-pre.h b/include/asm-blackfin/blackfin-config-pre.h
index 9df01ad..e973de7 100644
--- a/include/asm-blackfin/blackfin-config-pre.h
+++ b/include/asm-blackfin/blackfin-config-pre.h
@@ -14,12 +14,6 @@
 #define MK_STR(x) XMK_STR(x)
 #define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
 
-/* Configurable Blackfin-specific monitor commands */
-#define CONFIG_SYS_BFIN_CMD_BOOTLDR     0x01
-#define CONFIG_SYS_BFIN_CMD_CPLBINFO    0x02
-#define CONFIG_SYS_BFIN_CMD_OTP         0x04
-#define CONFIG_SYS_BFIN_CMD_CACHE_DUMP  0x08
-
 /* Bootmode defines -- your config needs to select this via CONFIG_BFIN_BOOT_MODE.
  * Depending on your cpu, some of these may not be valid, check your HRM.
  * The actual values here are meaningless as long as they're unique.
diff --git a/include/asm-blackfin/mach-bf527/ADSP-EDN-BF52x-extended_cdef.h b/include/asm-blackfin/mach-bf527/ADSP-EDN-BF52x-extended_cdef.h
index 85acdd6..f65b439 100644
--- a/include/asm-blackfin/mach-bf527/ADSP-EDN-BF52x-extended_cdef.h
+++ b/include/asm-blackfin/mach-bf527/ADSP-EDN-BF52x-extended_cdef.h
@@ -6,9 +6,9 @@
 #ifndef __BFIN_CDEF_ADSP_EDN_BF52x_extended__
 #define __BFIN_CDEF_ADSP_EDN_BF52x_extended__
 
-#define pSIC_RVECT                     ((uint32_t volatile *)SIC_RVECT) /* Interrupt Reset Vector Address Register */
-#define bfin_read_SIC_RVECT()          bfin_read32(SIC_RVECT)
-#define bfin_write_SIC_RVECT(val)      bfin_write32(SIC_RVECT, val)
+#define pSIC_RVECT                     ((uint16_t volatile *)SIC_RVECT) /* Interrupt Reset Vector Address Register */
+#define bfin_read_SIC_RVECT()          bfin_read16(SIC_RVECT)
+#define bfin_write_SIC_RVECT(val)      bfin_write16(SIC_RVECT, val)
 #define pSIC_IMASK0                    ((uint32_t volatile *)SIC_IMASK0) /* Interrupt Mask Register */
 #define bfin_read_SIC_IMASK0()         bfin_read32(SIC_IMASK0)
 #define bfin_write_SIC_IMASK0(val)     bfin_write32(SIC_IMASK0, val)
@@ -304,7 +304,6 @@
 #define bfin_read_SPORT0_TFSDIV()      bfin_read16(SPORT0_TFSDIV)
 #define bfin_write_SPORT0_TFSDIV(val)  bfin_write16(SPORT0_TFSDIV, val)
 #define pSPORT0_TX                     ((uint32_t volatile *)SPORT0_TX) /* SPORT0 TX Data Register */
-#define bfin_read_SPORT0_TX()          bfin_read32(SPORT0_TX)
 #define bfin_write_SPORT0_TX(val)      bfin_write32(SPORT0_TX, val)
 #define pSPORT0_RX                     ((uint32_t volatile *)SPORT0_RX) /* SPORT0 RX Data Register */
 #define bfin_read_SPORT0_RX()          bfin_read32(SPORT0_RX)
@@ -370,7 +369,6 @@
 #define bfin_read_SPORT1_TFSDIV()      bfin_read16(SPORT1_TFSDIV)
 #define bfin_write_SPORT1_TFSDIV(val)  bfin_write16(SPORT1_TFSDIV, val)
 #define pSPORT1_TX                     ((uint32_t volatile *)SPORT1_TX) /* SPORT1 TX Data Register */
-#define bfin_read_SPORT1_TX()          bfin_read32(SPORT1_TX)
 #define bfin_write_SPORT1_TX(val)      bfin_write32(SPORT1_TX, val)
 #define pSPORT1_RX                     ((uint32_t volatile *)SPORT1_RX) /* SPORT1 RX Data Register */
 #define bfin_read_SPORT1_RX()          bfin_read32(SPORT1_RX)
diff --git a/include/asm-blackfin/mach-bf527/anomaly.h b/include/asm-blackfin/mach-bf527/anomaly.h
index 035e8d8..df6808d 100644
--- a/include/asm-blackfin/mach-bf527/anomaly.h
+++ b/include/asm-blackfin/mach-bf527/anomaly.h
@@ -2,7 +2,7 @@
  * File: include/asm-blackfin/mach-bf527/anomaly.h
  * Bugs: Enter bugs at http://blackfin.uclinux.org/
  *
- * Copyright (C) 2004-2008 Analog Devices Inc.
+ * Copyright (C) 2004-2009 Analog Devices Inc.
  * Licensed under the GPL-2 or later.
  */
 
@@ -167,12 +167,16 @@
 #define ANOMALY_05000263 (0)
 #define ANOMALY_05000266 (0)
 #define ANOMALY_05000273 (0)
+#define ANOMALY_05000278 (0)
 #define ANOMALY_05000285 (0)
+#define ANOMALY_05000305 (0)
 #define ANOMALY_05000307 (0)
 #define ANOMALY_05000311 (0)
 #define ANOMALY_05000312 (0)
 #define ANOMALY_05000323 (0)
 #define ANOMALY_05000363 (0)
 #define ANOMALY_05000412 (0)
+#define ANOMALY_05000447 (0)
+#define ANOMALY_05000448 (0)
 
 #endif
diff --git a/include/asm-blackfin/mach-bf527/ports.h b/include/asm-blackfin/mach-bf527/ports.h
index c32d69f..e6b1df8 100644
--- a/include/asm-blackfin/mach-bf527/ports.h
+++ b/include/asm-blackfin/mach-bf527/ports.h
@@ -52,76 +52,9 @@
 #define PORT_x_MUX_7_FUNC_3	(PORT_x_MUX_FUNC_3 << 14)
 #define PORT_x_MUX_7_FUNC_4	(PORT_x_MUX_FUNC_4 << 14)
 
-/* Port F Masks */
-#define PF0			0x0001
-#define PF1			0x0002
-#define PF2			0x0004
-#define PF3			0x0008
-#define PF4			0x0010
-#define PF5			0x0020
-#define PF6			0x0040
-#define PF7			0x0080
-#define PF8			0x0100
-#define PF9			0x0200
-#define PF10			0x0400
-#define PF11			0x0800
-#define PF12			0x1000
-#define PF13			0x2000
-#define PF14			0x4000
-#define PF15			0x8000
-
-/* Port G Masks */
-#define PG0			0x0001
-#define PG1			0x0002
-#define PG2			0x0004
-#define PG3			0x0008
-#define PG4			0x0010
-#define PG5			0x0020
-#define PG6			0x0040
-#define PG7			0x0080
-#define PG8			0x0100
-#define PG9			0x0200
-#define PG10			0x0400
-#define PG11			0x0800
-#define PG12			0x1000
-#define PG13			0x2000
-#define PG14			0x4000
-#define PG15			0x8000
-
-/* Port H Masks */
-#define PH0			0x0001
-#define PH1			0x0002
-#define PH2			0x0004
-#define PH3			0x0008
-#define PH4			0x0010
-#define PH5			0x0020
-#define PH6			0x0040
-#define PH7			0x0080
-#define PH8			0x0100
-#define PH9			0x0200
-#define PH10			0x0400
-#define PH11			0x0800
-#define PH12			0x1000
-#define PH13			0x2000
-#define PH14			0x4000
-#define PH15			0x8000
-
-/* Port J Masks */
-#define PJ0			0x0001
-#define PJ1			0x0002
-#define PJ2			0x0004
-#define PJ3			0x0008
-#define PJ4			0x0010
-#define PJ5			0x0020
-#define PJ6			0x0040
-#define PJ7			0x0080
-#define PJ8			0x0100
-#define PJ9			0x0200
-#define PJ10			0x0400
-#define PJ11			0x0800
-#define PJ12			0x1000
-#define PJ13			0x2000
-#define PJ14			0x4000
-#define PJ15			0x8000
+#include "../mach-common/bits/ports-f.h"
+#include "../mach-common/bits/ports-g.h"
+#include "../mach-common/bits/ports-h.h"
+#include "../mach-common/bits/ports-j.h"
 
 #endif
diff --git a/include/asm-blackfin/mach-bf533/anomaly.h b/include/asm-blackfin/mach-bf533/anomaly.h
index 0d3a034..1cf893e 100644
--- a/include/asm-blackfin/mach-bf533/anomaly.h
+++ b/include/asm-blackfin/mach-bf533/anomaly.h
@@ -2,7 +2,7 @@
  * File: include/asm-blackfin/mach-bf533/anomaly.h
  * Bugs: Enter bugs at http://blackfin.uclinux.org/
  *
- * Copyright (C) 2004-2008 Analog Devices Inc.
+ * Copyright (C) 2004-2009 Analog Devices Inc.
  * Licensed under the GPL-2 or later.
  */
 
@@ -160,7 +160,7 @@
 #define ANOMALY_05000301 (__SILICON_REVISION__ < 6)
 /* SSYNCs After Writes To DMA MMR Registers May Not Be Handled Correctly */
 #define ANOMALY_05000302 (__SILICON_REVISION__ < 5)
-/* New Feature: Additional Hysteresis on SPORT Input Pins (Not Available On Older Silicon) */
+/* SPORT_HYS Bit in PLL_CTL Register Is Not Functional */
 #define ANOMALY_05000305 (__SILICON_REVISION__ < 5)
 /* New Feature: Additional PPI Frame Sync Sampling Options (Not Available On Older Silicon) */
 #define ANOMALY_05000306 (__SILICON_REVISION__ < 5)
@@ -278,9 +278,12 @@
 #define ANOMALY_05000266 (0)
 #define ANOMALY_05000323 (0)
 #define ANOMALY_05000353 (1)
+#define ANOMALY_05000380 (0)
 #define ANOMALY_05000386 (1)
 #define ANOMALY_05000412 (0)
 #define ANOMALY_05000432 (0)
 #define ANOMALY_05000435 (0)
+#define ANOMALY_05000447 (0)
+#define ANOMALY_05000448 (0)
 
 #endif
diff --git a/include/asm-blackfin/mach-bf533/ports.h b/include/asm-blackfin/mach-bf533/ports.h
index 79bc54d..512d6df 100644
--- a/include/asm-blackfin/mach-bf533/ports.h
+++ b/include/asm-blackfin/mach-bf533/ports.h
@@ -5,22 +5,6 @@
 #ifndef __BFIN_PERIPHERAL_PORT__
 #define __BFIN_PERIPHERAL_PORT__
 
-/* Port F Masks */
-#define PF0			0x0001
-#define PF1			0x0002
-#define PF2			0x0004
-#define PF3			0x0008
-#define PF4			0x0010
-#define PF5			0x0020
-#define PF6			0x0040
-#define PF7			0x0080
-#define PF8			0x0100
-#define PF9			0x0200
-#define PF10			0x0400
-#define PF11			0x0800
-#define PF12			0x1000
-#define PF13			0x2000
-#define PF14			0x4000
-#define PF15			0x8000
+#include "../mach-common/bits/ports-f.h"
 
 #endif
diff --git a/include/asm-blackfin/mach-bf537/ADSP-EDN-BF534-extended_cdef.h b/include/asm-blackfin/mach-bf537/ADSP-EDN-BF534-extended_cdef.h
index b9e4d67..0700875 100644
--- a/include/asm-blackfin/mach-bf537/ADSP-EDN-BF534-extended_cdef.h
+++ b/include/asm-blackfin/mach-bf537/ADSP-EDN-BF534-extended_cdef.h
@@ -27,9 +27,9 @@
 #define pSYSCR                         ((uint16_t volatile *)SYSCR) /* System Configuration Register */
 #define bfin_read_SYSCR()              bfin_read16(SYSCR)
 #define bfin_write_SYSCR(val)          bfin_write16(SYSCR, val)
-#define pSIC_RVECT                     ((uint32_t volatile *)SIC_RVECT) /* Interrupt Reset Vector Address Register */
-#define bfin_read_SIC_RVECT()          bfin_read32(SIC_RVECT)
-#define bfin_write_SIC_RVECT(val)      bfin_write32(SIC_RVECT, val)
+#define pSIC_RVECT                     ((uint16_t volatile *)SIC_RVECT) /* Interrupt Reset Vector Address Register */
+#define bfin_read_SIC_RVECT()          bfin_read16(SIC_RVECT)
+#define bfin_write_SIC_RVECT(val)      bfin_write16(SIC_RVECT, val)
 #define pSIC_IMASK                     ((uint32_t volatile *)SIC_IMASK) /* Interrupt Mask Register */
 #define bfin_read_SIC_IMASK()          bfin_read32(SIC_IMASK)
 #define bfin_write_SIC_IMASK(val)      bfin_write32(SIC_IMASK, val)
@@ -304,7 +304,6 @@
 #define bfin_read_SPORT0_TFSDIV()      bfin_read16(SPORT0_TFSDIV)
 #define bfin_write_SPORT0_TFSDIV(val)  bfin_write16(SPORT0_TFSDIV, val)
 #define pSPORT0_TX                     ((uint32_t volatile *)SPORT0_TX) /* SPORT0 TX Data Register */
-#define bfin_read_SPORT0_TX()          bfin_read32(SPORT0_TX)
 #define bfin_write_SPORT0_TX(val)      bfin_write32(SPORT0_TX, val)
 #define pSPORT0_RX                     ((uint32_t volatile *)SPORT0_RX) /* SPORT0 RX Data Register */
 #define bfin_read_SPORT0_RX()          bfin_read32(SPORT0_RX)
@@ -370,7 +369,6 @@
 #define bfin_read_SPORT1_TFSDIV()      bfin_read16(SPORT1_TFSDIV)
 #define bfin_write_SPORT1_TFSDIV(val)  bfin_write16(SPORT1_TFSDIV, val)
 #define pSPORT1_TX                     ((uint32_t volatile *)SPORT1_TX) /* SPORT1 TX Data Register */
-#define bfin_read_SPORT1_TX()          bfin_read32(SPORT1_TX)
 #define bfin_write_SPORT1_TX(val)      bfin_write32(SPORT1_TX, val)
 #define pSPORT1_RX                     ((uint32_t volatile *)SPORT1_RX) /* SPORT1 RX Data Register */
 #define bfin_read_SPORT1_RX()          bfin_read32(SPORT1_RX)
diff --git a/include/asm-blackfin/mach-bf537/anomaly.h b/include/asm-blackfin/mach-bf537/anomaly.h
index 9cb3912..1bfd80c 100644
--- a/include/asm-blackfin/mach-bf537/anomaly.h
+++ b/include/asm-blackfin/mach-bf537/anomaly.h
@@ -2,7 +2,7 @@
  * File: include/asm-blackfin/mach-bf537/anomaly.h
  * Bugs: Enter bugs at http://blackfin.uclinux.org/
  *
- * Copyright (C) 2004-2008 Analog Devices Inc.
+ * Copyright (C) 2004-2009 Analog Devices Inc.
  * Licensed under the GPL-2 or later.
  */
 
@@ -110,7 +110,7 @@
 #define ANOMALY_05000301 (1)
 /* SSYNCs After Writes To CAN/DMA MMR Registers Are Not Always Handled Correctly */
 #define ANOMALY_05000304 (__SILICON_REVISION__ < 3)
-/* New Feature: Additional Hysteresis on SPORT Input Pins (Not Available On Older Silicon) */
+/* SPORT_HYS Bit in PLL_CTL Register Is Not Functional */
 #define ANOMALY_05000305 (__SILICON_REVISION__ < 3)
 /* SCKELOW Bit Does Not Maintain State Through Hibernate */
 #define ANOMALY_05000307 (__SILICON_REVISION__ < 3)
@@ -168,9 +168,12 @@
 #define ANOMALY_05000323 (0)
 #define ANOMALY_05000353 (1)
 #define ANOMALY_05000363 (0)
+#define ANOMALY_05000380 (0)
 #define ANOMALY_05000386 (1)
 #define ANOMALY_05000412 (0)
 #define ANOMALY_05000432 (0)
 #define ANOMALY_05000435 (0)
+#define ANOMALY_05000447 (0)
+#define ANOMALY_05000448 (0)
 
 #endif
diff --git a/include/asm-blackfin/mach-bf537/ports.h b/include/asm-blackfin/mach-bf537/ports.h
index cc28ba3..2f62934 100644
--- a/include/asm-blackfin/mach-bf537/ports.h
+++ b/include/asm-blackfin/mach-bf537/ports.h
@@ -21,58 +21,8 @@
 #define PGRE			0x0400
 #define PGTE			0x0800
 
-/* Port F Masks */
-#define PF0			0x0001
-#define PF1			0x0002
-#define PF2			0x0004
-#define PF3			0x0008
-#define PF4			0x0010
-#define PF5			0x0020
-#define PF6			0x0040
-#define PF7			0x0080
-#define PF8			0x0100
-#define PF9			0x0200
-#define PF10			0x0400
-#define PF11			0x0800
-#define PF12			0x1000
-#define PF13			0x2000
-#define PF14			0x4000
-#define PF15			0x8000
-
-/* Port G Masks */
-#define PG0			0x0001
-#define PG1			0x0002
-#define PG2			0x0004
-#define PG3			0x0008
-#define PG4			0x0010
-#define PG5			0x0020
-#define PG6			0x0040
-#define PG7			0x0080
-#define PG8			0x0100
-#define PG9			0x0200
-#define PG10			0x0400
-#define PG11			0x0800
-#define PG12			0x1000
-#define PG13			0x2000
-#define PG14			0x4000
-#define PG15			0x8000
-
-/* Port H Masks */
-#define PH0			0x0001
-#define PH1			0x0002
-#define PH2			0x0004
-#define PH3			0x0008
-#define PH4			0x0010
-#define PH5			0x0020
-#define PH6			0x0040
-#define PH7			0x0080
-#define PH8			0x0100
-#define PH9			0x0200
-#define PH10			0x0400
-#define PH11			0x0800
-#define PH12			0x1000
-#define PH13			0x2000
-#define PH14			0x4000
-#define PH15			0x8000
+#include "../mach-common/bits/ports-f.h"
+#include "../mach-common/bits/ports-g.h"
+#include "../mach-common/bits/ports-h.h"
 
 #endif
diff --git a/include/asm-blackfin/mach-bf548/ADSP-EDN-BF542-extended_cdef.h b/include/asm-blackfin/mach-bf548/ADSP-EDN-BF542-extended_cdef.h
index e9572a0..51d9cf2 100644
--- a/include/asm-blackfin/mach-bf548/ADSP-EDN-BF542-extended_cdef.h
+++ b/include/asm-blackfin/mach-bf548/ADSP-EDN-BF542-extended_cdef.h
@@ -3577,7 +3577,6 @@
 #define bfin_read_SPORT1_TFSDIV()      bfin_read16(SPORT1_TFSDIV)
 #define bfin_write_SPORT1_TFSDIV(val)  bfin_write16(SPORT1_TFSDIV, val)
 #define pSPORT1_TX                     ((uint32_t volatile *)SPORT1_TX) /* SPORT1 Transmit Data Register */
-#define bfin_read_SPORT1_TX()          bfin_read32(SPORT1_TX)
 #define bfin_write_SPORT1_TX(val)      bfin_write32(SPORT1_TX, val)
 #define pSPORT1_RCR1                   ((uint16_t volatile *)SPORT1_RCR1) /* SPORT1 Receive Configuration 1 Register */
 #define bfin_read_SPORT1_RCR1()        bfin_read16(SPORT1_RCR1)
@@ -3643,7 +3642,6 @@
 #define bfin_read_SPORT2_TFSDIV()      bfin_read16(SPORT2_TFSDIV)
 #define bfin_write_SPORT2_TFSDIV(val)  bfin_write16(SPORT2_TFSDIV, val)
 #define pSPORT2_TX                     ((uint32_t volatile *)SPORT2_TX) /* SPORT2 Transmit Data Register */
-#define bfin_read_SPORT2_TX()          bfin_read32(SPORT2_TX)
 #define bfin_write_SPORT2_TX(val)      bfin_write32(SPORT2_TX, val)
 #define pSPORT2_RCR1                   ((uint16_t volatile *)SPORT2_RCR1) /* SPORT2 Receive Configuration 1 Register */
 #define bfin_read_SPORT2_RCR1()        bfin_read16(SPORT2_RCR1)
@@ -3709,7 +3707,6 @@
 #define bfin_read_SPORT3_TFSDIV()      bfin_read16(SPORT3_TFSDIV)
 #define bfin_write_SPORT3_TFSDIV(val)  bfin_write16(SPORT3_TFSDIV, val)
 #define pSPORT3_TX                     ((uint32_t volatile *)SPORT3_TX) /* SPORT3 Transmit Data Register */
-#define bfin_read_SPORT3_TX()          bfin_read32(SPORT3_TX)
 #define bfin_write_SPORT3_TX(val)      bfin_write32(SPORT3_TX, val)
 #define pSPORT3_RCR1                   ((uint16_t volatile *)SPORT3_RCR1) /* SPORT3 Receive Configuration 1 Register */
 #define bfin_read_SPORT3_RCR1()        bfin_read16(SPORT3_RCR1)
diff --git a/include/asm-blackfin/mach-bf548/ADSP-EDN-BF544-extended_cdef.h b/include/asm-blackfin/mach-bf548/ADSP-EDN-BF544-extended_cdef.h
index 968cd3e..4c0fdf5 100644
--- a/include/asm-blackfin/mach-bf548/ADSP-EDN-BF544-extended_cdef.h
+++ b/include/asm-blackfin/mach-bf548/ADSP-EDN-BF544-extended_cdef.h
@@ -4678,7 +4678,6 @@
 #define bfin_read_SPORT1_TFSDIV()      bfin_read16(SPORT1_TFSDIV)
 #define bfin_write_SPORT1_TFSDIV(val)  bfin_write16(SPORT1_TFSDIV, val)
 #define pSPORT1_TX                     ((uint32_t volatile *)SPORT1_TX) /* SPORT1 Transmit Data Register */
-#define bfin_read_SPORT1_TX()          bfin_read32(SPORT1_TX)
 #define bfin_write_SPORT1_TX(val)      bfin_write32(SPORT1_TX, val)
 #define pSPORT1_RCR1                   ((uint16_t volatile *)SPORT1_RCR1) /* SPORT1 Receive Configuration 1 Register */
 #define bfin_read_SPORT1_RCR1()        bfin_read16(SPORT1_RCR1)
@@ -4744,7 +4743,6 @@
 #define bfin_read_SPORT2_TFSDIV()      bfin_read16(SPORT2_TFSDIV)
 #define bfin_write_SPORT2_TFSDIV(val)  bfin_write16(SPORT2_TFSDIV, val)
 #define pSPORT2_TX                     ((uint32_t volatile *)SPORT2_TX) /* SPORT2 Transmit Data Register */
-#define bfin_read_SPORT2_TX()          bfin_read32(SPORT2_TX)
 #define bfin_write_SPORT2_TX(val)      bfin_write32(SPORT2_TX, val)
 #define pSPORT2_RCR1                   ((uint16_t volatile *)SPORT2_RCR1) /* SPORT2 Receive Configuration 1 Register */
 #define bfin_read_SPORT2_RCR1()        bfin_read16(SPORT2_RCR1)
@@ -4810,7 +4808,6 @@
 #define bfin_read_SPORT3_TFSDIV()      bfin_read16(SPORT3_TFSDIV)
 #define bfin_write_SPORT3_TFSDIV(val)  bfin_write16(SPORT3_TFSDIV, val)
 #define pSPORT3_TX                     ((uint32_t volatile *)SPORT3_TX) /* SPORT3 Transmit Data Register */
-#define bfin_read_SPORT3_TX()          bfin_read32(SPORT3_TX)
 #define bfin_write_SPORT3_TX(val)      bfin_write32(SPORT3_TX, val)
 #define pSPORT3_RCR1                   ((uint16_t volatile *)SPORT3_RCR1) /* SPORT3 Receive Configuration 1 Register */
 #define bfin_read_SPORT3_RCR1()        bfin_read16(SPORT3_RCR1)
diff --git a/include/asm-blackfin/mach-bf548/ADSP-EDN-BF547-extended_cdef.h b/include/asm-blackfin/mach-bf548/ADSP-EDN-BF547-extended_cdef.h
index bd40f35..e0f76ae 100644
--- a/include/asm-blackfin/mach-bf548/ADSP-EDN-BF547-extended_cdef.h
+++ b/include/asm-blackfin/mach-bf548/ADSP-EDN-BF547-extended_cdef.h
@@ -2713,7 +2713,6 @@
 #define bfin_read_SPORT0_TFSDIV()      bfin_read16(SPORT0_TFSDIV)
 #define bfin_write_SPORT0_TFSDIV(val)  bfin_write16(SPORT0_TFSDIV, val)
 #define pSPORT0_TX                     ((uint32_t volatile *)SPORT0_TX) /* SPORT0 Transmit Data Register */
-#define bfin_read_SPORT0_TX()          bfin_read32(SPORT0_TX)
 #define bfin_write_SPORT0_TX(val)      bfin_write32(SPORT0_TX, val)
 #define pSPORT0_RCR1                   ((uint16_t volatile *)SPORT0_RCR1) /* SPORT0 Receive Configuration 1 Register */
 #define bfin_read_SPORT0_RCR1()        bfin_read16(SPORT0_RCR1)
@@ -2779,7 +2778,6 @@
 #define bfin_read_SPORT1_TFSDIV()      bfin_read16(SPORT1_TFSDIV)
 #define bfin_write_SPORT1_TFSDIV(val)  bfin_write16(SPORT1_TFSDIV, val)
 #define pSPORT1_TX                     ((uint32_t volatile *)SPORT1_TX) /* SPORT1 Transmit Data Register */
-#define bfin_read_SPORT1_TX()          bfin_read32(SPORT1_TX)
 #define bfin_write_SPORT1_TX(val)      bfin_write32(SPORT1_TX, val)
 #define pSPORT1_RCR1                   ((uint16_t volatile *)SPORT1_RCR1) /* SPORT1 Receive Configuration 1 Register */
 #define bfin_read_SPORT1_RCR1()        bfin_read16(SPORT1_RCR1)
@@ -2845,7 +2843,6 @@
 #define bfin_read_SPORT2_TFSDIV()      bfin_read16(SPORT2_TFSDIV)
 #define bfin_write_SPORT2_TFSDIV(val)  bfin_write16(SPORT2_TFSDIV, val)
 #define pSPORT2_TX                     ((uint32_t volatile *)SPORT2_TX) /* SPORT2 Transmit Data Register */
-#define bfin_read_SPORT2_TX()          bfin_read32(SPORT2_TX)
 #define bfin_write_SPORT2_TX(val)      bfin_write32(SPORT2_TX, val)
 #define pSPORT2_RCR1                   ((uint16_t volatile *)SPORT2_RCR1) /* SPORT2 Receive Configuration 1 Register */
 #define bfin_read_SPORT2_RCR1()        bfin_read16(SPORT2_RCR1)
@@ -2911,7 +2908,6 @@
 #define bfin_read_SPORT3_TFSDIV()      bfin_read16(SPORT3_TFSDIV)
 #define bfin_write_SPORT3_TFSDIV(val)  bfin_write16(SPORT3_TFSDIV, val)
 #define pSPORT3_TX                     ((uint32_t volatile *)SPORT3_TX) /* SPORT3 Transmit Data Register */
-#define bfin_read_SPORT3_TX()          bfin_read32(SPORT3_TX)
 #define bfin_write_SPORT3_TX(val)      bfin_write32(SPORT3_TX, val)
 #define pSPORT3_RCR1                   ((uint16_t volatile *)SPORT3_RCR1) /* SPORT3 Receive Configuration 1 Register */
 #define bfin_read_SPORT3_RCR1()        bfin_read16(SPORT3_RCR1)
diff --git a/include/asm-blackfin/mach-bf548/ADSP-EDN-BF548-extended_cdef.h b/include/asm-blackfin/mach-bf548/ADSP-EDN-BF548-extended_cdef.h
index 77cd5dc..caf2f6f 100644
--- a/include/asm-blackfin/mach-bf548/ADSP-EDN-BF548-extended_cdef.h
+++ b/include/asm-blackfin/mach-bf548/ADSP-EDN-BF548-extended_cdef.h
@@ -4885,7 +4885,6 @@
 #define bfin_read_SPORT0_TFSDIV()      bfin_read16(SPORT0_TFSDIV)
 #define bfin_write_SPORT0_TFSDIV(val)  bfin_write16(SPORT0_TFSDIV, val)
 #define pSPORT0_TX                     ((uint32_t volatile *)SPORT0_TX) /* SPORT0 Transmit Data Register */
-#define bfin_read_SPORT0_TX()          bfin_read32(SPORT0_TX)
 #define bfin_write_SPORT0_TX(val)      bfin_write32(SPORT0_TX, val)
 #define pSPORT0_RCR1                   ((uint16_t volatile *)SPORT0_RCR1) /* SPORT0 Receive Configuration 1 Register */
 #define bfin_read_SPORT0_RCR1()        bfin_read16(SPORT0_RCR1)
@@ -4951,7 +4950,6 @@
 #define bfin_read_SPORT1_TFSDIV()      bfin_read16(SPORT1_TFSDIV)
 #define bfin_write_SPORT1_TFSDIV(val)  bfin_write16(SPORT1_TFSDIV, val)
 #define pSPORT1_TX                     ((uint32_t volatile *)SPORT1_TX) /* SPORT1 Transmit Data Register */
-#define bfin_read_SPORT1_TX()          bfin_read32(SPORT1_TX)
 #define bfin_write_SPORT1_TX(val)      bfin_write32(SPORT1_TX, val)
 #define pSPORT1_RCR1                   ((uint16_t volatile *)SPORT1_RCR1) /* SPORT1 Receive Configuration 1 Register */
 #define bfin_read_SPORT1_RCR1()        bfin_read16(SPORT1_RCR1)
@@ -5017,7 +5015,6 @@
 #define bfin_read_SPORT2_TFSDIV()      bfin_read16(SPORT2_TFSDIV)
 #define bfin_write_SPORT2_TFSDIV(val)  bfin_write16(SPORT2_TFSDIV, val)
 #define pSPORT2_TX                     ((uint32_t volatile *)SPORT2_TX) /* SPORT2 Transmit Data Register */
-#define bfin_read_SPORT2_TX()          bfin_read32(SPORT2_TX)
 #define bfin_write_SPORT2_TX(val)      bfin_write32(SPORT2_TX, val)
 #define pSPORT2_RCR1                   ((uint16_t volatile *)SPORT2_RCR1) /* SPORT2 Receive Configuration 1 Register */
 #define bfin_read_SPORT2_RCR1()        bfin_read16(SPORT2_RCR1)
@@ -5083,7 +5080,6 @@
 #define bfin_read_SPORT3_TFSDIV()      bfin_read16(SPORT3_TFSDIV)
 #define bfin_write_SPORT3_TFSDIV(val)  bfin_write16(SPORT3_TFSDIV, val)
 #define pSPORT3_TX                     ((uint32_t volatile *)SPORT3_TX) /* SPORT3 Transmit Data Register */
-#define bfin_read_SPORT3_TX()          bfin_read32(SPORT3_TX)
 #define bfin_write_SPORT3_TX(val)      bfin_write32(SPORT3_TX, val)
 #define pSPORT3_RCR1                   ((uint16_t volatile *)SPORT3_RCR1) /* SPORT3 Receive Configuration 1 Register */
 #define bfin_read_SPORT3_RCR1()        bfin_read16(SPORT3_RCR1)
diff --git a/include/asm-blackfin/mach-bf548/ADSP-EDN-BF549-extended_cdef.h b/include/asm-blackfin/mach-bf548/ADSP-EDN-BF549-extended_cdef.h
index c5d3511..af90e4c 100644
--- a/include/asm-blackfin/mach-bf548/ADSP-EDN-BF549-extended_cdef.h
+++ b/include/asm-blackfin/mach-bf548/ADSP-EDN-BF549-extended_cdef.h
@@ -5233,7 +5233,6 @@
 #define bfin_read_SPORT0_TFSDIV()      bfin_read16(SPORT0_TFSDIV)
 #define bfin_write_SPORT0_TFSDIV(val)  bfin_write16(SPORT0_TFSDIV, val)
 #define pSPORT0_TX                     ((uint32_t volatile *)SPORT0_TX) /* SPORT0 Transmit Data Register */
-#define bfin_read_SPORT0_TX()          bfin_read32(SPORT0_TX)
 #define bfin_write_SPORT0_TX(val)      bfin_write32(SPORT0_TX, val)
 #define pSPORT0_RCR1                   ((uint16_t volatile *)SPORT0_RCR1) /* SPORT0 Receive Configuration 1 Register */
 #define bfin_read_SPORT0_RCR1()        bfin_read16(SPORT0_RCR1)
@@ -5299,7 +5298,6 @@
 #define bfin_read_SPORT1_TFSDIV()      bfin_read16(SPORT1_TFSDIV)
 #define bfin_write_SPORT1_TFSDIV(val)  bfin_write16(SPORT1_TFSDIV, val)
 #define pSPORT1_TX                     ((uint32_t volatile *)SPORT1_TX) /* SPORT1 Transmit Data Register */
-#define bfin_read_SPORT1_TX()          bfin_read32(SPORT1_TX)
 #define bfin_write_SPORT1_TX(val)      bfin_write32(SPORT1_TX, val)
 #define pSPORT1_RCR1                   ((uint16_t volatile *)SPORT1_RCR1) /* SPORT1 Receive Configuration 1 Register */
 #define bfin_read_SPORT1_RCR1()        bfin_read16(SPORT1_RCR1)
@@ -5365,7 +5363,6 @@
 #define bfin_read_SPORT2_TFSDIV()      bfin_read16(SPORT2_TFSDIV)
 #define bfin_write_SPORT2_TFSDIV(val)  bfin_write16(SPORT2_TFSDIV, val)
 #define pSPORT2_TX                     ((uint32_t volatile *)SPORT2_TX) /* SPORT2 Transmit Data Register */
-#define bfin_read_SPORT2_TX()          bfin_read32(SPORT2_TX)
 #define bfin_write_SPORT2_TX(val)      bfin_write32(SPORT2_TX, val)
 #define pSPORT2_RCR1                   ((uint16_t volatile *)SPORT2_RCR1) /* SPORT2 Receive Configuration 1 Register */
 #define bfin_read_SPORT2_RCR1()        bfin_read16(SPORT2_RCR1)
@@ -5431,7 +5428,6 @@
 #define bfin_read_SPORT3_TFSDIV()      bfin_read16(SPORT3_TFSDIV)
 #define bfin_write_SPORT3_TFSDIV(val)  bfin_write16(SPORT3_TFSDIV, val)
 #define pSPORT3_TX                     ((uint32_t volatile *)SPORT3_TX) /* SPORT3 Transmit Data Register */
-#define bfin_read_SPORT3_TX()          bfin_read32(SPORT3_TX)
 #define bfin_write_SPORT3_TX(val)      bfin_write32(SPORT3_TX, val)
 #define pSPORT3_RCR1                   ((uint16_t volatile *)SPORT3_RCR1) /* SPORT3 Receive Configuration 1 Register */
 #define bfin_read_SPORT3_RCR1()        bfin_read16(SPORT3_RCR1)
diff --git a/include/asm-blackfin/mach-bf548/anomaly.h b/include/asm-blackfin/mach-bf548/anomaly.h
index 3b54309..882e40c 100644
--- a/include/asm-blackfin/mach-bf548/anomaly.h
+++ b/include/asm-blackfin/mach-bf548/anomaly.h
@@ -2,12 +2,12 @@
  * File: include/asm-blackfin/mach-bf548/anomaly.h
  * Bugs: Enter bugs at http://blackfin.uclinux.org/
  *
- * Copyright (C) 2004-2008 Analog Devices Inc.
+ * Copyright (C) 2004-2009 Analog Devices Inc.
  * Licensed under the GPL-2 or later.
  */
 
 /* This file shoule be up to date with:
- *  - Revision G, 08/07/2008; ADSP-BF542/BF544/BF547/BF548/BF549 Blackfin Processor Anomaly List
+ *  - Revision H, 01/16/2009; ADSP-BF542/BF544/BF547/BF548/BF549 Blackfin Processor Anomaly List
  */
 
 #ifndef _MACH_ANOMALY_H_
@@ -91,8 +91,6 @@
 #define ANOMALY_05000371 (__SILICON_REVISION__ < 2)
 /* USB DP/DM Data Pins May Lose State When Entering Hibernate */
 #define ANOMALY_05000372 (__SILICON_REVISION__ < 1)
-/* Mobile DDR Operation Not Functional */
-#define ANOMALY_05000377 (1)
 /* Security/Authentication Speedpath Causes Authentication To Fail To Initiate */
 #define ANOMALY_05000378 (__SILICON_REVISION__ < 2)
 /* 16-Bit NAND FLASH Boot Mode Is Not Functional */
@@ -157,8 +155,22 @@
 #define ANOMALY_05000429 (__SILICON_REVISION__ < 2)
 /* Software System Reset Corrupts PLL_LOCKCNT Register */
 #define ANOMALY_05000430 (__SILICON_REVISION__ >= 2)
+/* Incorrect Use of Stack in Lockbox Firmware During Authentication */
+#define ANOMALY_05000431 (__SILICON_REVISION__ < 3)
+/* OTP Write Accesses Not Supported */
+#define ANOMALY_05000442 (__SILICON_REVISION__ < 1)
 /* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */
 #define ANOMALY_05000443 (1)
+/* CDMAPRIO and L2DMAPRIO Bits in the SYSCR Register Are Not Functional */
+#define ANOMALY_05000446 (1)
+/* UART IrDA Receiver Fails on Extended Bit Pulses */
+#define ANOMALY_05000447 (1)
+/* DDR Clock Duty Cycle Spec Violation (tCH, tCL) */
+#define ANOMALY_05000448 (__SILICON_REVISION__ == 1)
+/* Reduced Timing Margins on DDR Output Setup and Hold (tDS and tDH) */
+#define ANOMALY_05000449 (__SILICON_REVISION__ == 1)
+/* USB DMA Mode 1 Short Packet Data Corruption */
+#define ANOMALY_05000450 (1
 
 /* Anomalies that don't exist on this proc */
 #define ANOMALY_05000125 (0)
@@ -171,10 +183,13 @@
 #define ANOMALY_05000263 (0)
 #define ANOMALY_05000266 (0)
 #define ANOMALY_05000273 (0)
+#define ANOMALY_05000278 (0)
+#define ANOMALY_05000305 (0)
 #define ANOMALY_05000307 (0)
 #define ANOMALY_05000311 (0)
 #define ANOMALY_05000323 (0)
 #define ANOMALY_05000363 (0)
+#define ANOMALY_05000380 (0)
 #define ANOMALY_05000412 (0)
 #define ANOMALY_05000432 (0)
 #define ANOMALY_05000435 (0)
diff --git a/include/asm-blackfin/mach-bf548/ports.h b/include/asm-blackfin/mach-bf548/ports.h
index 5f0e45e..50054f3 100644
--- a/include/asm-blackfin/mach-bf548/ports.h
+++ b/include/asm-blackfin/mach-bf548/ports.h
@@ -92,184 +92,15 @@
 #define PORT_x_MUX_15_FUNC_3	(PORT_x_MUX_FUNC_3 << 30)
 #define PORT_x_MUX_15_FUNC_4	(PORT_x_MUX_FUNC_4 << 30)
 
-/* Port A Masks */
-#define PA0			0x0001
-#define PA1			0x0002
-#define PA2			0x0004
-#define PA3			0x0008
-#define PA4			0x0010
-#define PA5			0x0020
-#define PA6			0x0040
-#define PA7			0x0080
-#define PA8			0x0100
-#define PA9			0x0200
-#define PA10			0x0400
-#define PA11			0x0800
-#define PA12			0x1000
-#define PA13			0x2000
-#define PA14			0x4000
-#define PA15			0x8000
-
-/* Port B Masks */
-#define PB0			0x0001
-#define PB1			0x0002
-#define PB2			0x0004
-#define PB3			0x0008
-#define PB4			0x0010
-#define PB5			0x0020
-#define PB6			0x0040
-#define PB7			0x0080
-#define PB8			0x0100
-#define PB9			0x0200
-#define PB10			0x0400
-#define PB11			0x0800
-#define PB12			0x1000
-#define PB13			0x2000
-#define PB14			0x4000
-#define PB15			0x8000
-
-/* Port C Masks */
-#define PC0			0x0001
-#define PC1			0x0002
-#define PC2			0x0004
-#define PC3			0x0008
-#define PC4			0x0010
-#define PC5			0x0020
-#define PC6			0x0040
-#define PC7			0x0080
-#define PC8			0x0100
-#define PC9			0x0200
-#define PC10			0x0400
-#define PC11			0x0800
-#define PC12			0x1000
-#define PC13			0x2000
-#define PC14			0x4000
-#define PC15			0x8000
-
-/* Port F Masks */
-#define PD0			0x0001
-#define PD1			0x0002
-#define PD2			0x0004
-#define PD3			0x0008
-#define PD4			0x0010
-#define PD5			0x0020
-#define PD6			0x0040
-#define PD7			0x0080
-#define PD8			0x0100
-#define PD9			0x0200
-#define PD10			0x0400
-#define PD11			0x0800
-#define PD12			0x1000
-#define PD13			0x2000
-#define PD14			0x4000
-#define PD15			0x8000
-
-/* Port F Masks */
-#define PE0			0x0001
-#define PE1			0x0002
-#define PE2			0x0004
-#define PE3			0x0008
-#define PE4			0x0010
-#define PE5			0x0020
-#define PE6			0x0040
-#define PE7			0x0080
-#define PE8			0x0100
-#define PE9			0x0200
-#define PE10			0x0400
-#define PE11			0x0800
-#define PE12			0x1000
-#define PE13			0x2000
-#define PE14			0x4000
-#define PE15			0x8000
-
-/* Port F Masks */
-#define PF0			0x0001
-#define PF1			0x0002
-#define PF2			0x0004
-#define PF3			0x0008
-#define PF4			0x0010
-#define PF5			0x0020
-#define PF6			0x0040
-#define PF7			0x0080
-#define PF8			0x0100
-#define PF9			0x0200
-#define PF10			0x0400
-#define PF11			0x0800
-#define PF12			0x1000
-#define PF13			0x2000
-#define PF14			0x4000
-#define PF15			0x8000
-
-/* Port G Masks */
-#define PG0			0x0001
-#define PG1			0x0002
-#define PG2			0x0004
-#define PG3			0x0008
-#define PG4			0x0010
-#define PG5			0x0020
-#define PG6			0x0040
-#define PG7			0x0080
-#define PG8			0x0100
-#define PG9			0x0200
-#define PG10			0x0400
-#define PG11			0x0800
-#define PG12			0x1000
-#define PG13			0x2000
-#define PG14			0x4000
-#define PG15			0x8000
-
-/* Port H Masks */
-#define PH0			0x0001
-#define PH1			0x0002
-#define PH2			0x0004
-#define PH3			0x0008
-#define PH4			0x0010
-#define PH5			0x0020
-#define PH6			0x0040
-#define PH7			0x0080
-#define PH8			0x0100
-#define PH9			0x0200
-#define PH10			0x0400
-#define PH11			0x0800
-#define PH12			0x1000
-#define PH13			0x2000
-#define PH14			0x4000
-#define PH15			0x8000
-
-/* Port I Masks */
-#define PI0			0x0001
-#define PI1			0x0002
-#define PI2			0x0004
-#define PI3			0x0008
-#define PI4			0x0010
-#define PI5			0x0020
-#define PI6			0x0040
-#define PI7			0x0080
-#define PI8			0x0100
-#define PI9			0x0200
-#define PI10			0x0400
-#define PI11			0x0800
-#define PI12			0x1000
-#define PI13			0x2000
-#define PI14			0x4000
-#define PI15			0x8000
-
-/* Port I Masks */
-#define PJ0			0x0001
-#define PJ1			0x0002
-#define PJ2			0x0004
-#define PJ3			0x0008
-#define PJ4			0x0010
-#define PJ5			0x0020
-#define PJ6			0x0040
-#define PJ7			0x0080
-#define PJ8			0x0100
-#define PJ9			0x0200
-#define PJ10			0x0400
-#define PJ11			0x0800
-#define PJ12			0x1000
-#define PJ13			0x2000
-#define PJ14			0x4000
-#define PJ15			0x8000
+#include "../mach-common/bits/ports-a.h"
+#include "../mach-common/bits/ports-b.h"
+#include "../mach-common/bits/ports-c.h"
+#include "../mach-common/bits/ports-d.h"
+#include "../mach-common/bits/ports-e.h"
+#include "../mach-common/bits/ports-f.h"
+#include "../mach-common/bits/ports-g.h"
+#include "../mach-common/bits/ports-h.h"
+#include "../mach-common/bits/ports-i.h"
+#include "../mach-common/bits/ports-j.h"
 
 #endif
diff --git a/include/asm-blackfin/mach-bf561/BF561_cdef.h b/include/asm-blackfin/mach-bf561/BF561_cdef.h
index d8883f3..e2c165a 100644
--- a/include/asm-blackfin/mach-bf561/BF561_cdef.h
+++ b/include/asm-blackfin/mach-bf561/BF561_cdef.h
@@ -244,9 +244,9 @@
 #define pSICA_SWRST                    ((uint16_t volatile *)SICA_SWRST)
 #define bfin_read_SICA_SWRST()         bfin_read16(SICA_SWRST)
 #define bfin_write_SICA_SWRST(val)     bfin_write16(SICA_SWRST, val)
-#define pSICA_SYSCR                    ((uint32_t volatile *)SICA_SYSCR)
-#define bfin_read_SICA_SYSCR()         bfin_read32(SICA_SYSCR)
-#define bfin_write_SICA_SYSCR(val)     bfin_write32(SICA_SYSCR, val)
+#define pSICA_SYSCR                    ((uint16_t volatile *)SICA_SYSCR)
+#define bfin_read_SICA_SYSCR()         bfin_read16(SICA_SYSCR)
+#define bfin_write_SICA_SYSCR(val)     bfin_write16(SICA_SYSCR, val)
 #define pSICA_RVECT                    ((uint16_t volatile *)SICA_RVECT)
 #define bfin_read_SICA_RVECT()         bfin_read16(SICA_RVECT)
 #define bfin_write_SICA_RVECT(val)     bfin_write16(SICA_RVECT, val)
@@ -295,9 +295,9 @@
 #define pSICB_SWRST                    ((uint16_t volatile *)SICB_SWRST)
 #define bfin_read_SICB_SWRST()         bfin_read16(SICB_SWRST)
 #define bfin_write_SICB_SWRST(val)     bfin_write16(SICB_SWRST, val)
-#define pSICB_SYSCR                    ((uint32_t volatile *)SICB_SYSCR)
-#define bfin_read_SICB_SYSCR()         bfin_read32(SICB_SYSCR)
-#define bfin_write_SICB_SYSCR(val)     bfin_write32(SICB_SYSCR, val)
+#define pSICB_SYSCR                    ((uint16_t volatile *)SICB_SYSCR)
+#define bfin_read_SICB_SYSCR()         bfin_read16(SICB_SYSCR)
+#define bfin_write_SICB_SYSCR(val)     bfin_write16(SICB_SYSCR, val)
 #define pSICB_RVECT                    ((uint16_t volatile *)SICB_RVECT)
 #define bfin_read_SICB_RVECT()         bfin_read16(SICB_RVECT)
 #define bfin_write_SICB_RVECT(val)     bfin_write16(SICB_RVECT, val)
diff --git a/include/asm-blackfin/mach-bf561/anomaly.h b/include/asm-blackfin/mach-bf561/anomaly.h
index 1a9e175..d0b0b35 100644
--- a/include/asm-blackfin/mach-bf561/anomaly.h
+++ b/include/asm-blackfin/mach-bf561/anomaly.h
@@ -2,7 +2,7 @@
  * File: include/asm-blackfin/mach-bf561/anomaly.h
  * Bugs: Enter bugs at http://blackfin.uclinux.org/
  *
- * Copyright (C) 2004-2008 Analog Devices Inc.
+ * Copyright (C) 2004-2009 Analog Devices Inc.
  * Licensed under the GPL-2 or later.
  */
 
@@ -224,7 +224,7 @@
 #define ANOMALY_05000301 (1)
 /* SSYNCs After Writes To DMA MMR Registers May Not Be Handled Correctly */
 #define ANOMALY_05000302 (1)
-/* New Feature: Additional Hysteresis on SPORT Input Pins (Not Available On Older Silicon) */
+/* SPORT_HYS Bit in PLL_CTL Register Is Not Functional */
 #define ANOMALY_05000305 (__SILICON_REVISION__ < 5)
 /* SCKELOW Bit Does Not Maintain State Through Hibernate */
 #define ANOMALY_05000307 (__SILICON_REVISION__ < 5)
@@ -283,8 +283,11 @@
 #define ANOMALY_05000273 (0)
 #define ANOMALY_05000311 (0)
 #define ANOMALY_05000353 (1)
+#define ANOMALY_05000380 (0)
 #define ANOMALY_05000386 (1)
 #define ANOMALY_05000432 (0)
 #define ANOMALY_05000435 (0)
+#define ANOMALY_05000447 (0)
+#define ANOMALY_05000448 (0)
 
 #endif
diff --git a/include/asm-blackfin/mach-bf561/def_local.h b/include/asm-blackfin/mach-bf561/def_local.h
index 3ddd689..597dcec 100644
--- a/include/asm-blackfin/mach-bf561/def_local.h
+++ b/include/asm-blackfin/mach-bf561/def_local.h
@@ -8,3 +8,5 @@
 #define bfin_write_WDOG_CNT(val) bfin_write_WDOGA_CNT(val)
 #define bfin_write_WDOG_CTL(val) bfin_write_WDOGA_CTL(val)
 #define bfin_write_WDOG_STAT(val) bfin_write_WDOGA_STAT(val)
+
+#include "ports.h"
diff --git a/include/asm-blackfin/mach-bf561/ports.h b/include/asm-blackfin/mach-bf561/ports.h
new file mode 100644
index 0000000..194d4a3
--- /dev/null
+++ b/include/asm-blackfin/mach-bf561/ports.h
@@ -0,0 +1,44 @@
+/*
+ * Port Masks
+ */
+
+#ifndef __BFIN_PERIPHERAL_PORT__
+#define __BFIN_PERIPHERAL_PORT__
+
+#include "../mach-common/bits/ports-f.h"
+
+/* The non-standard PF16+ */
+#define PF16		(1 << 0)
+#define PF17		(1 << 1)
+#define PF18		(1 << 2)
+#define PF19		(1 << 3)
+#define PF20		(1 << 4)
+#define PF21		(1 << 5)
+#define PF22		(1 << 6)
+#define PF23		(1 << 7)
+#define PF24		(1 << 8)
+#define PF25		(1 << 9)
+#define PF26		(1 << 10)
+#define PF27		(1 << 11)
+#define PF28		(1 << 12)
+#define PF29		(1 << 13)
+#define PF30		(1 << 14)
+#define PF31		(1 << 15)
+#define PF32		(1 << 0)
+#define PF33		(1 << 1)
+#define PF34		(1 << 2)
+#define PF35		(1 << 3)
+#define PF36		(1 << 4)
+#define PF37		(1 << 5)
+#define PF38		(1 << 6)
+#define PF39		(1 << 7)
+#define PF40		(1 << 8)
+#define PF41		(1 << 9)
+#define PF42		(1 << 10)
+#define PF43		(1 << 11)
+#define PF44		(1 << 12)
+#define PF45		(1 << 13)
+#define PF46		(1 << 14)
+#define PF47		(1 << 15)
+
+#endif
diff --git a/include/asm-blackfin/mach-common/ADSP-EDN-DUAL-CORE-extended_cdef.h b/include/asm-blackfin/mach-common/ADSP-EDN-DUAL-CORE-extended_cdef.h
index c0c7e1e..43f3850 100644
--- a/include/asm-blackfin/mach-common/ADSP-EDN-DUAL-CORE-extended_cdef.h
+++ b/include/asm-blackfin/mach-common/ADSP-EDN-DUAL-CORE-extended_cdef.h
@@ -1798,7 +1798,6 @@
 #define bfin_read_SPORT0_TX()          bfin_read32(SPORT0_TX)
 #define bfin_write_SPORT0_TX(val)      bfin_write32(SPORT0_TX, val)
 #define pSPORT0_RX                     ((uint32_t volatile *)SPORT0_RX)
-#define bfin_read_SPORT0_RX()          bfin_read32(SPORT0_RX)
 #define bfin_write_SPORT0_RX(val)      bfin_write32(SPORT0_RX, val)
 #define pSPORT0_RCR1                   ((uint16_t volatile *)SPORT0_RCR1)
 #define bfin_read_SPORT0_RCR1()        bfin_read16(SPORT0_RCR1)
@@ -1861,7 +1860,6 @@
 #define bfin_read_SPORT1_TFSDIV()      bfin_read16(SPORT1_TFSDIV)
 #define bfin_write_SPORT1_TFSDIV(val)  bfin_write16(SPORT1_TFSDIV, val)
 #define pSPORT1_TX                     ((uint32_t volatile *)SPORT1_TX)
-#define bfin_read_SPORT1_TX()          bfin_read32(SPORT1_TX)
 #define bfin_write_SPORT1_TX(val)      bfin_write32(SPORT1_TX, val)
 #define pSPORT1_RX                     ((uint32_t volatile *)SPORT1_RX)
 #define bfin_read_SPORT1_RX()          bfin_read32(SPORT1_RX)
diff --git a/include/asm-blackfin/mach-common/ADSP-EDN-extended_cdef.h b/include/asm-blackfin/mach-common/ADSP-EDN-extended_cdef.h
index 4c439e5..2e61b5f 100644
--- a/include/asm-blackfin/mach-common/ADSP-EDN-extended_cdef.h
+++ b/include/asm-blackfin/mach-common/ADSP-EDN-extended_cdef.h
@@ -900,9 +900,9 @@
 #define pSWRST                         ((uint16_t volatile *)SWRST) /* Software Reset Register (16-bit) */
 #define bfin_read_SWRST()              bfin_read16(SWRST)
 #define bfin_write_SWRST(val)          bfin_write16(SWRST, val)
-#define pSYSCR                         ((uint32_t volatile *)SYSCR) /* System Configuration register */
-#define bfin_read_SYSCR()              bfin_read32(SYSCR)
-#define bfin_write_SYSCR(val)          bfin_write32(SYSCR, val)
+#define pSYSCR                         ((uint16_t volatile *)SYSCR) /* System Configuration register */
+#define bfin_read_SYSCR()              bfin_read16(SYSCR)
+#define bfin_write_SYSCR(val)          bfin_write16(SYSCR, val)
 #define pEVT_OVERRIDE                  ((uint32_t volatile *)EVT_OVERRIDE)
 #define bfin_read_EVT_OVERRIDE()       bfin_read32(EVT_OVERRIDE)
 #define bfin_write_EVT_OVERRIDE(val)   bfin_write32(EVT_OVERRIDE, val)
@@ -1039,7 +1039,6 @@
 #define bfin_read_SPORT0_TFSDIV()      bfin_read16(SPORT0_TFSDIV)
 #define bfin_write_SPORT0_TFSDIV(val)  bfin_write16(SPORT0_TFSDIV, val)
 #define pSPORT0_TX                     ((uint32_t volatile *)SPORT0_TX) /* SPORT0 TX Data Register */
-#define bfin_read_SPORT0_TX()          bfin_read32(SPORT0_TX)
 #define bfin_write_SPORT0_TX(val)      bfin_write32(SPORT0_TX, val)
 #define pSPORT0_RX                     ((uint32_t volatile *)SPORT0_RX) /* SPORT0 RX Data Register */
 #define bfin_read_SPORT0_RX()          bfin_read32(SPORT0_RX)
@@ -1081,7 +1080,6 @@
 #define bfin_read_SPORT1_TFSDIV()      bfin_read16(SPORT1_TFSDIV)
 #define bfin_write_SPORT1_TFSDIV(val)  bfin_write16(SPORT1_TFSDIV, val)
 #define pSPORT1_TX                     ((uint32_t volatile *)SPORT1_TX) /* SPORT1 TX Data Register */
-#define bfin_read_SPORT1_TX()          bfin_read32(SPORT1_TX)
 #define bfin_write_SPORT1_TX(val)      bfin_write32(SPORT1_TX, val)
 #define pSPORT1_RX                     ((uint32_t volatile *)SPORT1_RX) /* SPORT1 RX Data Register */
 #define bfin_read_SPORT1_RX()          bfin_read32(SPORT1_RX)
diff --git a/include/asm-blackfin/mach-common/bits/lockbox.h b/include/asm-blackfin/mach-common/bits/lockbox.h
index 8b696f3..77f849e 100644
--- a/include/asm-blackfin/mach-common/bits/lockbox.h
+++ b/include/asm-blackfin/mach-common/bits/lockbox.h
@@ -11,52 +11,52 @@
 
 /* SESR argument structure. Expected to reside at 0xFF900018. */
 typedef struct SESR_args {
-	unsigned short usFlags;		/* security firmware flags		*/
-	unsigned short usIRQMask;	/* interrupt mask			*/
-	unsigned long ulMessageSize;	/* message length in bytes		*/
-	unsigned long ulSFEntryPoint;	/* entry point of secure function	*/
-	unsigned long ulMessagePtr;	/* pointer to the buffer containing	*/
-					/* the digital signature and message	*/
-	unsigned long ulReserved1;	/* reserved				*/
-	unsigned long ulReserved2;	/* reserved				*/
+	unsigned short  usFlags;            /* security firmware flags            */
+	unsigned short  usIRQMask;          /* interrupt mask                     */
+	unsigned long   ulMessageSize;      /* message length in bytes            */
+	unsigned long   ulSFEntryPoint;     /* entry point of secure function     */
+	unsigned long   ulMessagePtr;       /* pointer to the buffer containing
+	                                       the digital signature and message  */
+	unsigned long   ulReserved1;        /* reserved                           */
+	unsigned long   ulReserved2;        /* reserved                           */
 } tSESR_args;
 
 /* Secure Entry Service Routine */
-void (* const sesr)(void) = (void *)_BOOTROM_SESR;
+static void (* const sesr)(void) = (void *)_BOOTROM_SESR;
 
 #endif
 
-/* SESR flags argument bitfields					    */
-#define SESR_FLAGS_STAY_AT_NMI		    0x0000
-#define SESR_FLAGS_DROP_BELOW_NMI	    0x0001
-#define SESR_FLAGS_NO_SF_DMA		    0x0000
-#define SESR_FLAGS_DMA_SF_TO_RUN_DEST	    0x0002
-#define SESR_FLAGS_USE_ADI_PUB_KEY	    0x0000
-#define SESR_FLAGS_USE_CUST_PUB_KEY	    0x0100
+/* SESR flags argument bitfields */
+#define SESR_FLAGS_STAY_AT_NMI              0x0000
+#define SESR_FLAGS_DROP_BELOW_NMI           0x0001
+#define SESR_FLAGS_NO_SF_DMA                0x0000
+#define SESR_FLAGS_DMA_SF_TO_RUN_DEST       0x0002
+#define SESR_FLAGS_USE_ADI_PUB_KEY          0x0000
+#define SESR_FLAGS_USE_CUST_PUB_KEY         0x0100
 
 /* Bit masks for SECURE_SYSSWT */
-#define EMUDABL		       0x00000001    /* Emulation Disable */
-#define RSTDABL		       0x00000002    /* Reset Disable */
-#define L1IDABL		       0x0000001c    /* L1 Instruction Memory Disable */
-#define L1DADABL	       0x000000e0    /* L1 Data Bank A Memory Disable */
-#define L1DBDABL	       0x00000700    /* L1 Data Bank B Memory Disable */
-#define DMA0OVR		       0x00000800    /* DMA0 Memory Access Override */
-#define DMA1OVR		       0x00001000    /* DMA1 Memory Access Override */
-#define EMUOVR		       0x00004000    /* Emulation Override */
-#define OTPSEN		       0x00008000    /* OTP Secrets Enable */
-#define L2DABL		       0x00070000    /* L2 Memory Disable */
+#define EMUDABL                0x00000001    /* Emulation Disable */
+#define RSTDABL                0x00000002    /* Reset Disable */
+#define L1IDABL                0x0000001c    /* L1 Instruction Memory Disable */
+#define L1DADABL               0x000000e0    /* L1 Data Bank A Memory Disable */
+#define L1DBDABL               0x00000700    /* L1 Data Bank B Memory Disable */
+#define DMA0OVR                0x00000800    /* DMA0 Memory Access Override */
+#define DMA1OVR                0x00001000    /* DMA1 Memory Access Override */
+#define EMUOVR                 0x00004000    /* Emulation Override */
+#define OTPSEN                 0x00008000    /* OTP Secrets Enable */
+#define L2DABL                 0x00070000    /* L2 Memory Disable */
 
 /* Bit masks for SECURE_CONTROL */
-#define SECURE0		       0x0001	     /* SECURE 0 */
-#define SECURE1		       0x0002	     /* SECURE 1 */
-#define SECURE2		       0x0004	     /* SECURE 2 */
-#define SECURE3		       0x0008	     /* SECURE 3 */
+#define SECURE0                0x0001        /* SECURE 0 */
+#define SECURE1                0x0002        /* SECURE 1 */
+#define SECURE2                0x0004        /* SECURE 2 */
+#define SECURE3                0x0008        /* SECURE 3 */
 
 /* Bit masks for SECURE_STATUS */
-#define SECMODE		       0x0003	     /* Secured Mode Control State */
-#define NMI		       0x0004	     /* Non Maskable Interrupt */
-#define AFVALID		       0x0008	     /* Authentication Firmware Valid */
-#define AFEXIT		       0x0010	     /* Authentication Firmware Exit */
-#define SECSTAT		       0x00e0	     /* Secure Status */
+#define SECMODE                0x0003        /* Secured Mode Control State */
+#define NMI                    0x0004        /* Non Maskable Interrupt */
+#define AFVALID                0x0008        /* Authentication Firmware Valid */
+#define AFEXIT                 0x0010        /* Authentication Firmware Exit */
+#define SECSTAT                0x00e0        /* Secure Status */
 
 #endif
diff --git a/include/asm-blackfin/mach-common/bits/ports-a.h b/include/asm-blackfin/mach-common/bits/ports-a.h
new file mode 100644
index 0000000..9f78a76
--- /dev/null
+++ b/include/asm-blackfin/mach-common/bits/ports-a.h
@@ -0,0 +1,25 @@
+/*
+ * Port A Masks
+ */
+
+#ifndef __BFIN_PERIPHERAL_PORT_A__
+#define __BFIN_PERIPHERAL_PORT_A__
+
+#define PA0		(1 << 0)
+#define PA1		(1 << 1)
+#define PA2		(1 << 2)
+#define PA3		(1 << 3)
+#define PA4		(1 << 4)
+#define PA5		(1 << 5)
+#define PA6		(1 << 6)
+#define PA7		(1 << 7)
+#define PA8		(1 << 8)
+#define PA9		(1 << 9)
+#define PA10		(1 << 10)
+#define PA11		(1 << 11)
+#define PA12		(1 << 12)
+#define PA13		(1 << 13)
+#define PA14		(1 << 14)
+#define PA15		(1 << 15)
+
+#endif
diff --git a/include/asm-blackfin/mach-common/bits/ports-b.h b/include/asm-blackfin/mach-common/bits/ports-b.h
new file mode 100644
index 0000000..b81702f
--- /dev/null
+++ b/include/asm-blackfin/mach-common/bits/ports-b.h
@@ -0,0 +1,25 @@
+/*
+ * Port B Masks
+ */
+
+#ifndef __BFIN_PERIPHERAL_PORT_B__
+#define __BFIN_PERIPHERAL_PORT_B__
+
+#define PB0		(1 << 0)
+#define PB1		(1 << 1)
+#define PB2		(1 << 2)
+#define PB3		(1 << 3)
+#define PB4		(1 << 4)
+#define PB5		(1 << 5)
+#define PB6		(1 << 6)
+#define PB7		(1 << 7)
+#define PB8		(1 << 8)
+#define PB9		(1 << 9)
+#define PB10		(1 << 10)
+#define PB11		(1 << 11)
+#define PB12		(1 << 12)
+#define PB13		(1 << 13)
+#define PB14		(1 << 14)
+#define PB15		(1 << 15)
+
+#endif
diff --git a/include/asm-blackfin/mach-common/bits/ports-c.h b/include/asm-blackfin/mach-common/bits/ports-c.h
new file mode 100644
index 0000000..3cc665e
--- /dev/null
+++ b/include/asm-blackfin/mach-common/bits/ports-c.h
@@ -0,0 +1,25 @@
+/*
+ * Port C Masks
+ */
+
+#ifndef __BFIN_PERIPHERAL_PORT_C__
+#define __BFIN_PERIPHERAL_PORT_C__
+
+#define PC0		(1 << 0)
+#define PC1		(1 << 1)
+#define PC2		(1 << 2)
+#define PC3		(1 << 3)
+#define PC4		(1 << 4)
+#define PC5		(1 << 5)
+#define PC6		(1 << 6)
+#define PC7		(1 << 7)
+#define PC8		(1 << 8)
+#define PC9		(1 << 9)
+#define PC10		(1 << 10)
+#define PC11		(1 << 11)
+#define PC12		(1 << 12)
+#define PC13		(1 << 13)
+#define PC14		(1 << 14)
+#define PC15		(1 << 15)
+
+#endif
diff --git a/include/asm-blackfin/mach-common/bits/ports-d.h b/include/asm-blackfin/mach-common/bits/ports-d.h
new file mode 100644
index 0000000..868c6a0
--- /dev/null
+++ b/include/asm-blackfin/mach-common/bits/ports-d.h
@@ -0,0 +1,25 @@
+/*
+ * Port D Masks
+ */
+
+#ifndef __BFIN_PERIPHERAL_PORT_D__
+#define __BFIN_PERIPHERAL_PORT_D__
+
+#define PD0		(1 << 0)
+#define PD1		(1 << 1)
+#define PD2		(1 << 2)
+#define PD3		(1 << 3)
+#define PD4		(1 << 4)
+#define PD5		(1 << 5)
+#define PD6		(1 << 6)
+#define PD7		(1 << 7)
+#define PD8		(1 << 8)
+#define PD9		(1 << 9)
+#define PD10		(1 << 10)
+#define PD11		(1 << 11)
+#define PD12		(1 << 12)
+#define PD13		(1 << 13)
+#define PD14		(1 << 14)
+#define PD15		(1 << 15)
+
+#endif
diff --git a/include/asm-blackfin/mach-common/bits/ports-e.h b/include/asm-blackfin/mach-common/bits/ports-e.h
new file mode 100644
index 0000000..c88b0d0
--- /dev/null
+++ b/include/asm-blackfin/mach-common/bits/ports-e.h
@@ -0,0 +1,25 @@
+/*
+ * Port E Masks
+ */
+
+#ifndef __BFIN_PERIPHERAL_PORT_E__
+#define __BFIN_PERIPHERAL_PORT_E__
+
+#define PE0		(1 << 0)
+#define PE1		(1 << 1)
+#define PE2		(1 << 2)
+#define PE3		(1 << 3)
+#define PE4		(1 << 4)
+#define PE5		(1 << 5)
+#define PE6		(1 << 6)
+#define PE7		(1 << 7)
+#define PE8		(1 << 8)
+#define PE9		(1 << 9)
+#define PE10		(1 << 10)
+#define PE11		(1 << 11)
+#define PE12		(1 << 12)
+#define PE13		(1 << 13)
+#define PE14		(1 << 14)
+#define PE15		(1 << 15)
+
+#endif
diff --git a/include/asm-blackfin/mach-common/bits/ports-f.h b/include/asm-blackfin/mach-common/bits/ports-f.h
new file mode 100644
index 0000000..d6af206
--- /dev/null
+++ b/include/asm-blackfin/mach-common/bits/ports-f.h
@@ -0,0 +1,25 @@
+/*
+ * Port F Masks
+ */
+
+#ifndef __BFIN_PERIPHERAL_PORT_F__
+#define __BFIN_PERIPHERAL_PORT_F__
+
+#define PF0		(1 << 0)
+#define PF1		(1 << 1)
+#define PF2		(1 << 2)
+#define PF3		(1 << 3)
+#define PF4		(1 << 4)
+#define PF5		(1 << 5)
+#define PF6		(1 << 6)
+#define PF7		(1 << 7)
+#define PF8		(1 << 8)
+#define PF9		(1 << 9)
+#define PF10		(1 << 10)
+#define PF11		(1 << 11)
+#define PF12		(1 << 12)
+#define PF13		(1 << 13)
+#define PF14		(1 << 14)
+#define PF15		(1 << 15)
+
+#endif
diff --git a/include/asm-blackfin/mach-common/bits/ports-g.h b/include/asm-blackfin/mach-common/bits/ports-g.h
new file mode 100644
index 0000000..09355d3
--- /dev/null
+++ b/include/asm-blackfin/mach-common/bits/ports-g.h
@@ -0,0 +1,25 @@
+/*
+ * Port G Masks
+ */
+
+#ifndef __BFIN_PERIPHERAL_PORT_G__
+#define __BFIN_PERIPHERAL_PORT_G__
+
+#define PG0		(1 << 0)
+#define PG1		(1 << 1)
+#define PG2		(1 << 2)
+#define PG3		(1 << 3)
+#define PG4		(1 << 4)
+#define PG5		(1 << 5)
+#define PG6		(1 << 6)
+#define PG7		(1 << 7)
+#define PG8		(1 << 8)
+#define PG9		(1 << 9)
+#define PG10		(1 << 10)
+#define PG11		(1 << 11)
+#define PG12		(1 << 12)
+#define PG13		(1 << 13)
+#define PG14		(1 << 14)
+#define PG15		(1 << 15)
+
+#endif
diff --git a/include/asm-blackfin/mach-common/bits/ports-h.h b/include/asm-blackfin/mach-common/bits/ports-h.h
new file mode 100644
index 0000000..fa3910c
--- /dev/null
+++ b/include/asm-blackfin/mach-common/bits/ports-h.h
@@ -0,0 +1,25 @@
+/*
+ * Port H Masks
+ */
+
+#ifndef __BFIN_PERIPHERAL_PORT_H__
+#define __BFIN_PERIPHERAL_PORT_H__
+
+#define PH0		(1 << 0)
+#define PH1		(1 << 1)
+#define PH2		(1 << 2)
+#define PH3		(1 << 3)
+#define PH4		(1 << 4)
+#define PH5		(1 << 5)
+#define PH6		(1 << 6)
+#define PH7		(1 << 7)
+#define PH8		(1 << 8)
+#define PH9		(1 << 9)
+#define PH10		(1 << 10)
+#define PH11		(1 << 11)
+#define PH12		(1 << 12)
+#define PH13		(1 << 13)
+#define PH14		(1 << 14)
+#define PH15		(1 << 15)
+
+#endif
diff --git a/include/asm-blackfin/mach-common/bits/ports-i.h b/include/asm-blackfin/mach-common/bits/ports-i.h
new file mode 100644
index 0000000..f176f08
--- /dev/null
+++ b/include/asm-blackfin/mach-common/bits/ports-i.h
@@ -0,0 +1,25 @@
+/*
+ * Port I Masks
+ */
+
+#ifndef __BFIN_PERIPHERAL_PORT_I__
+#define __BFIN_PERIPHERAL_PORT_I__
+
+#define PI0		(1 << 0)
+#define PI1		(1 << 1)
+#define PI2		(1 << 2)
+#define PI3		(1 << 3)
+#define PI4		(1 << 4)
+#define PI5		(1 << 5)
+#define PI6		(1 << 6)
+#define PI7		(1 << 7)
+#define PI8		(1 << 8)
+#define PI9		(1 << 9)
+#define PI10		(1 << 10)
+#define PI11		(1 << 11)
+#define PI12		(1 << 12)
+#define PI13		(1 << 13)
+#define PI14		(1 << 14)
+#define PI15		(1 << 15)
+
+#endif
diff --git a/include/asm-blackfin/mach-common/bits/ports-j.h b/include/asm-blackfin/mach-common/bits/ports-j.h
new file mode 100644
index 0000000..924123e
--- /dev/null
+++ b/include/asm-blackfin/mach-common/bits/ports-j.h
@@ -0,0 +1,25 @@
+/*
+ * Port J Masks
+ */
+
+#ifndef __BFIN_PERIPHERAL_PORT_J__
+#define __BFIN_PERIPHERAL_PORT_J__
+
+#define PJ0		(1 << 0)
+#define PJ1		(1 << 1)
+#define PJ2		(1 << 2)
+#define PJ3		(1 << 3)
+#define PJ4		(1 << 4)
+#define PJ5		(1 << 5)
+#define PJ6		(1 << 6)
+#define PJ7		(1 << 7)
+#define PJ8		(1 << 8)
+#define PJ9		(1 << 9)
+#define PJ10		(1 << 10)
+#define PJ11		(1 << 11)
+#define PJ12		(1 << 12)
+#define PJ13		(1 << 13)
+#define PJ14		(1 << 14)
+#define PJ15		(1 << 15)
+
+#endif
diff --git a/include/asm-blackfin/net.h b/include/asm-blackfin/net.h
new file mode 100644
index 0000000..97cb466
--- /dev/null
+++ b/include/asm-blackfin/net.h
@@ -0,0 +1,28 @@
+/*
+ * net.h - misc Blackfin network helpers
+ *
+ * Copyright (c) 2008-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __ASM_BFIN_RAND_MAC__
+#define __ASM_BFIN_RAND_MAC__
+
+/* If the board does not have a real MAC assigned to it, then generate a
+ * locally administrated pseudo-random one based on CYCLES and compile date.
+ */
+static inline void bfin_gen_rand_mac(uchar *mac_addr)
+{
+	/* make something up */
+	const char s[] = __DATE__;
+	size_t i;
+	u32 cycles;
+	for (i = 0; i < 6; ++i) {
+		asm("%0 = CYCLES;" : "=r" (cycles));
+		mac_addr[i] = cycles ^ s[i];
+	}
+	mac_addr[0] = (mac_addr[0] | 0x02) & ~0x01; /* make it local unicast */
+}
+
+#endif
diff --git a/include/configs/bf533-ezkit.h b/include/configs/bf533-ezkit.h
index 48c0252..eb08890 100644
--- a/include/configs/bf533-ezkit.h
+++ b/include/configs/bf533-ezkit.h
@@ -2,213 +2,155 @@
  * U-boot - Configuration file for BF533 EZKIT board
  */
 
-#ifndef __CONFIG_EZKIT533_H__
-#define __CONFIG_EZKIT533_H__
+#ifndef __CONFIG_BF533_EZKIT_H__
+#define __CONFIG_BF533_EZKIT_H__
 
 #include <asm/blackfin-config-pre.h>
 
-#define CONFIG_BAUDRATE		57600
 
-#define CONFIG_BOOTDELAY	5
-#define CONFIG_SYS_AUTOLOAD		"no"	/*rarpb, bootp or dhcp commands will perform only a */
+/*
+ * Processor Settings
+ */
+#define CONFIG_BFIN_CPU             bf533-0.3
+#define CONFIG_BFIN_BOOT_MODE       BFIN_BOOT_BYPASS
 
-#define CONFIG_SYS_LONGHELP		1
-#define CONFIG_CMDLINE_EDITING	1
-#define CONFIG_LOADADDR		0x01000000	/* default load address */
-#define CONFIG_BOOTCOMMAND	"tftp $(loadaddr) linux"
-/* #define CONFIG_BOOTARGS		"root=/dev/mtdblock0 rw" */
 
-#define CONFIG_DRIVER_SMC91111	1
-#define CONFIG_SMC91111_BASE	0x20310300
+/*
+ * Clock Settings
+ *	CCLK = (CLKIN * VCO_MULT) / CCLK_DIV
+ *	SCLK = (CLKIN * VCO_MULT) / SCLK_DIV
+ */
+/* CONFIG_CLKIN_HZ is any value in Hz					*/
+#define CONFIG_CLKIN_HZ			27000000
+/* CLKIN_HALF controls the DF bit in PLL_CTL      0 = CLKIN		*/
+/*                                                1 = CLKIN / 2		*/
+#define CONFIG_CLKIN_HALF		0
+/* PLL_BYPASS controls the BYPASS bit in PLL_CTL  0 = do not bypass	*/
+/*                                                1 = bypass PLL	*/
+#define CONFIG_PLL_BYPASS		0
+/* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL		*/
+/* Values can range from 0-63 (where 0 means 64)			*/
+#define CONFIG_VCO_MULT			22
+/* CCLK_DIV controls the core clock divider				*/
+/* Values can be 1, 2, 4, or 8 ONLY					*/
+#define CONFIG_CCLK_DIV			1
+/* SCLK_DIV controls the system clock divider				*/
+/* Values can range from 1-15						*/
+#define CONFIG_SCLK_DIV			5
 
-#if 0
-#define	CONFIG_MII
-#define CONFIG_SYS_DISCOVER_PHY
-#endif
 
-#define CONFIG_RTC_BFIN		1
-#define CONFIG_BOOT_RETRY_TIME	-1	/* Enable this if bootretry required, currently its disabled */
-
-#define CONFIG_PANIC_HANG 1
-
-#define CONFIG_BFIN_CPU	bf533-0.3
-#define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_BYPASS
-
-/* This sets the default state of the cache on U-Boot's boot */
-#define CONFIG_ICACHE_ON
-#define CONFIG_DCACHE_ON
-
-/* CONFIG_CLKIN_HZ is any value in Hz				*/
-#define CONFIG_CLKIN_HZ		27000000
-/* CONFIG_CLKIN_HALF controls what is passed to PLL 0=CLKIN	*/
-/*						    1=CLKIN/2	*/
-#define CONFIG_CLKIN_HALF	0
-/* CONFIG_PLL_BYPASS controls if the PLL is used 0=don't bypass	*/
-/*						 1=bypass PLL	*/
-#define CONFIG_PLL_BYPASS	0
-/* CONFIG_VCO_MULT controls what the multiplier of the PLL is.	*/
-/* Values can range from 1-64					*/
-#define CONFIG_VCO_MULT		22
-/* CONFIG_CCLK_DIV controls what the core clock divider is	*/
-/* Values can be 1, 2, 4, or 8 ONLY				*/
-#define CONFIG_CCLK_DIV		1
-/* CONFIG_SCLK_DIV controls what the peripheral clock divider is */
-/* Values can range from 1-15					*/
-#define CONFIG_SCLK_DIV		5
-/* CONFIG_SPI_BAUD controls the SPI peripheral clock divider	*/
-/* Values can range from 2-65535				*/
-/* SCK Frequency = SCLK / (2 * CONFIG_SPI_BAUD)			*/
-#define CONFIG_SPI_BAUD		2
-#define CONFIG_SPI_BAUD_INITBLOCK	4
-
-#if ( CONFIG_CLKIN_HALF == 0 )
-#define CONFIG_VCO_HZ		( CONFIG_CLKIN_HZ * CONFIG_VCO_MULT )
+/*
+ * Memory Settings
+ */
+#define CONFIG_MEM_SIZE		32
+/* Early EZKITs had 32megs, but later have 64megs */
+#if (CONFIG_MEM_SIZE == 64)
+# define CONFIG_MEM_ADD_WDTH	10
 #else
-#define CONFIG_VCO_HZ		(( CONFIG_CLKIN_HZ * CONFIG_VCO_MULT ) / 2 )
+# define CONFIG_MEM_ADD_WDTH	9
 #endif
 
-#if (CONFIG_PLL_BYPASS == 0)
-#define CONFIG_CCLK_HZ		( CONFIG_VCO_HZ / CONFIG_CCLK_DIV )
-#define CONFIG_SCLK_HZ		( CONFIG_VCO_HZ / CONFIG_SCLK_DIV )
-#else
-#define CONFIG_CCLK_HZ		CONFIG_CLKIN_HZ
-#define CONFIG_SCLK_HZ		CONFIG_CLKIN_HZ
-#endif
+#define CONFIG_EBIU_SDRRC_VAL	0x398
+#define CONFIG_EBIU_SDGCTL_VAL	0x91118d
 
-#define CONFIG_MEM_SIZE		32	/* 128, 64, 32, 16 */
-#define CONFIG_MEM_ADD_WDTH	9	/* 8, 9, 10, 11    */
-#define CONFIG_MEM_MT48LC16M16A2TG_75	1
+#define CONFIG_EBIU_AMGCTL_VAL	0xFF
+#define CONFIG_EBIU_AMBCTL0_VAL	0x7BB07BB0
+#define CONFIG_EBIU_AMBCTL1_VAL	0xFFC27BB0
 
-#define CONFIG_LOADS_ECHO	1
+#define CONFIG_SYS_MONITOR_LEN	(256 * 1024)
+#define CONFIG_SYS_MALLOC_LEN	(128 * 1024)
 
 
 /*
- * BOOTP options
+ * Network Settings
  */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
+#define ADI_CMDS_NETWORK	1
+#define CONFIG_DRIVER_SMC91111	1
+#define CONFIG_SMC91111_BASE	0x20310300
+#define SMC91111_EEPROM_INIT() \
+	do { \
+		*pFIO_DIR |= PF1; \
+		*pFIO_FLAG_S = PF1; \
+		SSYNC(); \
+	} while (0)
+#define CONFIG_HOSTNAME		bf533-ezkit
+/* Uncomment next line to use fixed MAC address */
+/* #define CONFIG_ETHADDR	02:80:ad:20:31:e8 */
 
 
 /*
- * Command line configuration.
+ * Flash Settings
  */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_JFFS2
-#define CONFIG_CMD_DATE
-
-
-#define CONFIG_BOOTARGS "root=/dev/mtdblock0 ip=192.168.0.15:192.168.0.2:192.168.0.1:255.255.255.0:ezkit:eth0:off console=ttyBF0,57600"
-
-#define	CONFIG_SYS_PROMPT		"bfin> "	/* Monitor Command Prompt */
-#if defined(CONFIG_CMD_KGDB)
-#define	CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size */
-#else
-#define	CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size */
-#endif
-#define	CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size */
-#define	CONFIG_SYS_MAXARGS		16	/* max number of command args */
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
-#define CONFIG_SYS_MEMTEST_START	0x00000000	/* memtest works on */
-#define CONFIG_SYS_MEMTEST_END		( (CONFIG_MEM_SIZE - 1) * 1024 * 1024)	/* 1 ... 31 MB in DRAM */
-#define	CONFIG_SYS_LOAD_ADDR		0x01000000	/* default load address */
-#define	CONFIG_SYS_HZ			1000	/* decrementer freq: 10 ms ticks */
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-#define	CONFIG_SYS_SDRAM_BASE		0x00000000
-#define CONFIG_SYS_MAX_RAM_SIZE	(CONFIG_MEM_SIZE * 1024 * 1024)
 #define CONFIG_SYS_FLASH_BASE		0x20000000
-
-#define	CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
-#define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_MAX_RAM_SIZE - CONFIG_SYS_MONITOR_LEN)
-#define	CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
-#define CONFIG_SYS_MALLOC_BASE		(CONFIG_SYS_MONITOR_BASE - CONFIG_SYS_MALLOC_LEN)
-#define CONFIG_SYS_GBL_DATA_SIZE	0x4000
-#define CONFIG_SYS_GBL_DATA_ADDR	(CONFIG_SYS_MALLOC_BASE - CONFIG_SYS_GBL_DATA_SIZE)
-#define CONFIG_STACKBASE	(CONFIG_SYS_GBL_DATA_ADDR  - 4)
-
-#define	CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
-#define CONFIG_SYS_FLASH0_BASE		0x20000000
-#define CONFIG_SYS_FLASH1_BASE		0x20200000
-#define CONFIG_SYS_FLASH2_BASE		0x20280000
-#define CONFIG_SYS_MAX_FLASH_BANKS	3	/* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT	40	/* max number of sectors on one chip */
-
-#define	CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_SYS_MAX_FLASH_BANKS	3
+#define CONFIG_SYS_MAX_FLASH_SECT	40
+#define CONFIG_ENV_IS_IN_FLASH
 #define CONFIG_ENV_ADDR		0x20020000
-#define	CONFIG_ENV_SECT_SIZE	0x10000	/* Total Size of Environment Sector */
-
-/* JFFS Partition offset set  */
-#define CONFIG_SYS_JFFS2_FIRST_BANK	0
-#define CONFIG_SYS_JFFS2_NUM_BANKS	1
-/* 512k reserved for u-boot */
-#define CONFIG_SYS_JFFS2_FIRST_SECTOR	11
-
-
-/*
- * Stack sizes
- */
-#define CONFIG_STACKSIZE	(128*1024)	/* regular stack */
-
-#define POLL_MODE		1
+#define CONFIG_ENV_SECT_SIZE	0x10000
 #define FLASH_TOT_SECT		40
-#define FLASH_SIZE		0x220000
-#define CONFIG_SYS_FLASH_SIZE		0x220000
 
-/*
- * Initialize PSD4256 registers for using I2C
- */
-#define	CONFIG_MISC_INIT_R
 
 /*
- * I2C settings
+ * I2C Settings
  * By default PF1 is used as SDA and PF0 as SCL on the Stamp board
  */
-#define CONFIG_SOFT_I2C		1	/* I2C bit-banged */
-/*
- * Software (bit-bang) I2C driver configuration
- */
-#define PF_SCL			PF0
-#define PF_SDA			PF1
-
-#define I2C_INIT		(*pFIO_DIR |=  PF_SCL); asm("ssync;")
-#define I2C_ACTIVE		(*pFIO_DIR |=  PF_SDA); *pFIO_INEN &= ~PF_SDA; asm("ssync;")
-#define I2C_TRISTATE		(*pFIO_DIR &= ~PF_SDA); *pFIO_INEN |= PF_SDA; asm("ssync;")
-#define I2C_READ		((volatile)(*pFIO_FLAG_D & PF_SDA) != 0); asm("ssync;")
-#define I2C_SDA(bit)	if(bit) { \
-				*pFIO_FLAG_S = PF_SDA; \
-				asm("ssync;"); \
-				} \
-			else    { \
-				*pFIO_FLAG_C = PF_SDA; \
-				asm("ssync;"); \
-				}
-#define I2C_SCL(bit)	if(bit) { \
-				*pFIO_FLAG_S = PF_SCL; \
-				asm("ssync;"); \
-				} \
-			else    { \
-				*pFIO_FLAG_C = PF_SCL; \
-				asm("ssync;"); \
-				}
-#define I2C_DELAY	udelay(5)	/* 1/4 I2C clock duration */
+#define CONFIG_SOFT_I2C
+#ifdef CONFIG_SOFT_I2C
+#define PF_SCL PF0
+#define PF_SDA PF1
+#define I2C_INIT \
+	do { \
+		*pFIO_DIR |= PF_SCL; \
+		SSYNC(); \
+	} while (0)
+#define I2C_ACTIVE \
+	do { \
+		*pFIO_DIR |= PF_SDA; \
+		*pFIO_INEN &= ~PF_SDA; \
+		SSYNC(); \
+	} while (0)
+#define I2C_TRISTATE \
+	do { \
+		*pFIO_DIR &= ~PF_SDA; \
+		*pFIO_INEN |= PF_SDA; \
+		SSYNC(); \
+	} while (0)
+#define I2C_READ ((*pFIO_FLAG_D & PF_SDA) != 0)
+#define I2C_SDA(bit) \
+	do { \
+		if (bit) \
+			*pFIO_FLAG_S = PF_SDA; \
+		else \
+			*pFIO_FLAG_C = PF_SDA; \
+		SSYNC(); \
+	} while (0)
+#define I2C_SCL(bit) \
+	do { \
+		if (bit) \
+			*pFIO_FLAG_S = PF_SCL; \
+		else \
+			*pFIO_FLAG_C = PF_SCL; \
+		SSYNC(); \
+	} while (0)
+#define I2C_DELAY		udelay(5)	/* 1/4 I2C clock duration */
 
 #define CONFIG_SYS_I2C_SPEED		50000
 #define CONFIG_SYS_I2C_SLAVE		0
+#endif
 
-#define CONFIG_SYS_BOOTM_LEN		0x4000000	/* Large Image Length, set to 64 Meg */
 
-#define CONFIG_EBIU_SDRRC_VAL  0x398
-#define CONFIG_EBIU_SDGCTL_VAL 0x91118d
-#define CONFIG_EBIU_SDBCTL_VAL 0x13
+/*
+ * Misc Settings
+ */
+#define CONFIG_MISC_INIT_R
+#define CONFIG_RTC_BFIN
+#define CONFIG_UART_CONSOLE	0
+
 
-#define CONFIG_EBIU_AMGCTL_VAL		0xFF
-#define CONFIG_EBIU_AMBCTL0_VAL		0x7BB07BB0
-#define CONFIG_EBIU_AMBCTL1_VAL		0xFFC27BB0
+/*
+ * Pull in common ADI header for remaining command/environment setup
+ */
+#include <configs/bfin_adi_common.h>
 
 #include <asm/blackfin-config-post.h>
 
diff --git a/include/configs/bf533-stamp.h b/include/configs/bf533-stamp.h
index ee41c7e..d8e1ffc 100644
--- a/include/configs/bf533-stamp.h
+++ b/include/configs/bf533-stamp.h
@@ -2,371 +2,244 @@
  * U-boot - Configuration file for BF533 STAMP board
  */
 
-#ifndef __CONFIG_STAMP_H__
-#define __CONFIG_STAMP_H__
+#ifndef __CONFIG_BF533_STAMP_H__
+#define __CONFIG_BF533_STAMP_H__
 
 #include <asm/blackfin-config-pre.h>
 
-#define CONFIG_RTC_BFIN			1
-
-#define CONFIG_PANIC_HANG 1
-
-#define CONFIG_BFIN_CPU	bf533-0.3
-#define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_BYPASS
-
-/* This sets the default state of the cache on U-Boot's boot */
-#define CONFIG_ICACHE_ON
-#define CONFIG_DCACHE_ON
 
 /*
- * Board settings
+ * Processor Settings
  */
-#define CONFIG_DRIVER_SMC91111	1
-#define CONFIG_SMC91111_BASE	0x20300300
-
-/* FLASH/ETHERNET uses the same address range */
-#define SHARED_RESOURCES	1
+#define CONFIG_BFIN_CPU             bf533-0.3
+#define CONFIG_BFIN_BOOT_MODE       BFIN_BOOT_BYPASS
 
-/* Is I2C bit-banged? */
-#define CONFIG_SOFT_I2C		1
 
 /*
- * Software (bit-bang) I2C driver configuration
+ * Clock Settings
+ *	CCLK = (CLKIN * VCO_MULT) / CCLK_DIV
+ *	SCLK = (CLKIN * VCO_MULT) / SCLK_DIV
  */
-#define PF_SCL			PF3
-#define PF_SDA			PF2
+/* CONFIG_CLKIN_HZ is any value in Hz					*/
+#define CONFIG_CLKIN_HZ			11059200
+/* CLKIN_HALF controls the DF bit in PLL_CTL      0 = CLKIN		*/
+/*                                                1 = CLKIN / 2		*/
+#define CONFIG_CLKIN_HALF		0
+/* PLL_BYPASS controls the BYPASS bit in PLL_CTL  0 = do not bypass	*/
+/*                                                1 = bypass PLL	*/
+#define CONFIG_PLL_BYPASS		0
+/* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL		*/
+/* Values can range from 0-63 (where 0 means 64)			*/
+#define CONFIG_VCO_MULT			45
+/* CCLK_DIV controls the core clock divider				*/
+/* Values can be 1, 2, 4, or 8 ONLY					*/
+#define CONFIG_CCLK_DIV			1
+/* SCLK_DIV controls the system clock divider				*/
+/* Values can range from 1-15						*/
+#define CONFIG_SCLK_DIV			5
 
-/*
- * Video splash screen support
- */
-#define  CONFIG_VIDEO		0
 
 /*
- * Clock settings
+ * Memory Settings
  */
+#define CONFIG_MEM_ADD_WDTH	11
+#define CONFIG_MEM_SIZE		128
 
-/* CONFIG_CLKIN_HZ is any value in Hz				*/
-#define CONFIG_CLKIN_HZ		11059200
-/* CONFIG_CLKIN_HALF controls what is passed to PLL 0=CLKIN	*/
-/*						    1=CLKIN/2	*/
-#define CONFIG_CLKIN_HALF	0
-/* CONFIG_PLL_BYPASS controls if the PLL is used 0=don't bypass	*/
-/*						 1=bypass PLL	*/
-#define CONFIG_PLL_BYPASS	0
-/* CONFIG_VCO_MULT controls what the multiplier of the PLL is.	*/
-/* Values can range from 1-64					*/
-#define CONFIG_VCO_MULT		36
-/* CONFIG_CCLK_DIV controls what the core clock divider is	*/
-/* Values can be 1, 2, 4, or 8 ONLY				*/
-#define CONFIG_CCLK_DIV		1
-/* CONFIG_SCLK_DIV controls what the peripheral clock divider is*/
-/* Values can range from 1-15					*/
-#define CONFIG_SCLK_DIV		5
-/* CONFIG_SPI_BAUD controls the SPI peripheral clock divider	*/
-/* Values can range from 2-65535				*/
-/* SCK Frequency = SCLK / (2 * CONFIG_SPI_BAUD)			*/
-#define CONFIG_SPI_BAUD		2
-#define CONFIG_SPI_BAUD_INITBLOCK	4
-
-/*
- * Network settings
- */
+#define CONFIG_EBIU_SDRRC_VAL	0x268
+#define CONFIG_EBIU_SDGCTL_VAL	0x911109
 
-#if (CONFIG_DRIVER_SMC91111)
-#if 0
-#define	CONFIG_MII
-#endif
+#define CONFIG_EBIU_AMGCTL_VAL	0xFF
+#define CONFIG_EBIU_AMBCTL0_VAL	0xBBC3BBC3
+#define CONFIG_EBIU_AMBCTL1_VAL	0x99B39983
 
-/* network support */
-#define CONFIG_IPADDR		192.168.0.15
-#define CONFIG_NETMASK		255.255.255.0
-#define CONFIG_GATEWAYIP	192.168.0.1
-#define CONFIG_SERVERIP		192.168.0.2
-#define CONFIG_HOSTNAME		STAMP
-#define CONFIG_ROOTPATH		/checkout/uClinux-dist/romfs
+#define CONFIG_SYS_MONITOR_LEN	(256 * 1024)
+#define CONFIG_SYS_MALLOC_LEN	(384 * 1024)
 
-/* To remove hardcoding and enable MAC storage in EEPROM  */
-/* #define CONFIG_ETHADDR		02:80:ad:20:31:b8 */
-#endif /* CONFIG_DRIVER_SMC91111 */
 
 /*
- * Flash settings
+ * Network Settings
  */
+#define ADI_CMDS_NETWORK	1
+#define CONFIG_DRIVER_SMC91111	1
+#define CONFIG_SMC91111_BASE	0x20300300
+#define SMC91111_EEPROM_INIT() \
+	do { \
+		*pFIO_DIR |= PF1; \
+		*pFIO_FLAG_S = PF1; \
+		SSYNC(); \
+	} while (0)
+#define CONFIG_HOSTNAME		bf533-stamp
+/* Uncomment next line to use fixed MAC address */
+/* #define CONFIG_ETHADDR	02:80:ad:20:31:b8 */
 
-#define CONFIG_SYS_FLASH_CFI		/* The flash is CFI compatible  */
-#define CONFIG_FLASH_CFI_DRIVER	/* Use common CFI driver	*/
-#define	CONFIG_SYS_FLASH_CFI_AMD_RESET
-
-#define CONFIG_SYS_FLASH_BASE		0x20000000
-#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT	67	/* max number of sectors on one chip */
-
-#if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_SPI_MASTER)
-#define CONFIG_ENV_IS_IN_EEPROM	1
-#define CONFIG_ENV_OFFSET		0x4000
-#define CONFIG_ENV_HEADER		(CONFIG_ENV_OFFSET + 0x12A)	/* 0x12A is the length of LDR file header */
-#else
-#define CONFIG_ENV_IS_IN_FLASH	1
-#define CONFIG_ENV_ADDR		0x20004000
-#define	CONFIG_ENV_OFFSET		(CONFIG_ENV_ADDR - CONFIG_SYS_FLASH_BASE)
-#endif
-
-#define	CONFIG_ENV_SIZE		0x2000
-#define CONFIG_ENV_SECT_SIZE	0x2000	/* Total Size of Environment Sector */
-#define	ENV_IS_EMBEDDED
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT	30000	/* Timeout for Chip Erase (in ms) */
-#define CONFIG_SYS_FLASH_ERASEBLOCK_TOUT	5000	/* Timeout for Block Erase (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT	1	/* Timeout for Flash Write (in ms) */
-
-/* JFFS Partition offset set  */
-#define CONFIG_SYS_JFFS2_FIRST_BANK 0
-#define CONFIG_SYS_JFFS2_NUM_BANKS  1
-/* 512k reserved for u-boot */
-#define CONFIG_SYS_JFFS2_FIRST_SECTOR	11
-
-/*
- * following timeouts shall be used once the
- * Flash real protection is enabled
- */
-#define CONFIG_SYS_FLASH_LOCK_TOUT	5	/* Timeout for Flash Set Lock Bit (in ms) */
-#define CONFIG_SYS_FLASH_UNLOCK_TOUT	10000	/* Timeout for Flash Clear Lock Bits (in ms) */
-
-/*
- * SDRAM settings & memory map
- */
-
-#define CONFIG_MEM_SIZE		128	/* 128, 64, 32, 16 */
-#define CONFIG_MEM_ADD_WDTH     11	/* 8, 9, 10, 11    */
-#define CONFIG_MEM_MT48LC64M4A2FB_7E	1
-
-#define CONFIG_SYS_MEMTEST_START	0x00000000	/* memtest works on */
-
-#define	CONFIG_SYS_SDRAM_BASE		0x00000000
-
-#define CONFIG_SYS_MAX_RAM_SIZE	(CONFIG_MEM_SIZE * 1024 *1024)
-#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MAX_RAM_SIZE - 0x80000 - 1)
-#define CONFIG_LOADADDR		0x01000000
-
-#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
-#define	CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
-#define CONFIG_SYS_MALLOC_LEN		(128 << 10)     /* Reserve 128 kB for malloc()	*/
-#define CONFIG_SYS_GBL_DATA_SIZE	0x4000		/* Reserve 16k for Global Data  */
-#define CONFIG_STACKSIZE	(128*1024)	/* regular stack */
-
-#define CONFIG_SYS_MONITOR_BASE		(CONFIG_SYS_MAX_RAM_SIZE - 0x40000)
-#define CONFIG_SYS_MALLOC_BASE		(CONFIG_SYS_MONITOR_BASE - CONFIG_SYS_MALLOC_LEN)
-#define CONFIG_SYS_GBL_DATA_ADDR	(CONFIG_SYS_MALLOC_BASE - CONFIG_SYS_GBL_DATA_SIZE)
-#define CONFIG_STACKBASE	(CONFIG_SYS_GBL_DATA_ADDR  - 4)
-
-/* Check to make sure everything fits in SDRAM */
-#if ((CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) > CONFIG_SYS_MAX_RAM_SIZE)
-	#error Memory Map does not fit into configuration
-#endif
-
-#if ( CONFIG_CLKIN_HALF == 0 )
-#define CONFIG_VCO_HZ		( CONFIG_CLKIN_HZ * CONFIG_VCO_MULT )
-#else
-#define CONFIG_VCO_HZ		(( CONFIG_CLKIN_HZ * CONFIG_VCO_MULT ) / 2 )
-#endif
-
-#if (CONFIG_PLL_BYPASS == 0)
-#define CONFIG_CCLK_HZ		( CONFIG_VCO_HZ / CONFIG_CCLK_DIV )
-#define CONFIG_SCLK_HZ		( CONFIG_VCO_HZ / CONFIG_SCLK_DIV )
-#else
-#define CONFIG_CCLK_HZ		CONFIG_CLKIN_HZ
-#define CONFIG_SCLK_HZ		CONFIG_CLKIN_HZ
-#endif
 
 /*
- * Command settings
+ * Flash Settings
  */
-
-#define CONFIG_SYS_LONGHELP		1
-#define CONFIG_CMDLINE_EDITING	1
-
-#define CONFIG_SYS_AUTOLOAD		"no"	/*rarpb, bootp or dhcp commands will perform only a */
-
-/* configuration lookup from the BOOTP/DHCP server, */
-/* but not try to load any image using TFTP	    */
-
-#define CONFIG_BOOTDELAY	5
-#define CONFIG_BOOT_RETRY_TIME	-1	/* Enable this if bootretry required, currently its disabled */
-#define CONFIG_BOOTCOMMAND	"run ramboot"
-
-#define CONFIG_BOOTARGS		"root=/dev/mtdblock0 rw console=ttyBF0,57600"
-
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
-	"ramargs=setenv bootargs root=/dev/mtdblock0 rw console=ttyBF0,57600\0" \
-	"nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):" \
-		"$(rootpath) console=ttyBF0,57600\0" \
-	"addip=setenv bootargs $(bootargs) ip=$(ipaddr):$(serverip):" \
-		"$(gatewayip):$(netmask):$(hostname):eth0:off\0" \
-	"ramboot=tftpboot $(loadaddr) linux; " \
-		"run ramargs;run addip;bootelf\0" \
-	"nfsboot=tftpboot $(loadaddr) linux; " \
-		"run nfsargs;run addip;bootelf\0" \
-	"flashboot=bootm 0x20100000\0" \
-	"update=tftpboot $(loadaddr) u-boot.bin; " \
-		"protect off 0x20000000 0x2003FFFF; erase 0x20000000 0x2003FFFF;" \
-		"cp.b $(loadaddr) 0x20000000 $(filesize)\0" \
-	""
-
-#ifdef CONFIG_SOFT_I2C
-#if (!CONFIG_SOFT_I2C)
-#undef CONFIG_SOFT_I2C
-#endif
-#endif
+#define CONFIG_FLASH_CFI_DRIVER
+#define CONFIG_SYS_FLASH_BASE		0x20000000
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_SYS_FLASH_CFI_AMD_RESET
+#define CONFIG_SYS_MAX_FLASH_BANKS	1
+#define CONFIG_SYS_MAX_FLASH_SECT	67
 
 
 /*
- * BOOTP options
+ * SPI Settings
  */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BFIN_SPI
+#define CONFIG_ENV_SPI_MAX_HZ	30000000
+#define CONFIG_SF_DEFAULT_HZ	30000000
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_ATMEL
+#define CONFIG_SPI_FLASH_SPANSION
+#define CONFIG_SPI_FLASH_STMICRO
+#define CONFIG_SPI_FLASH_WINBOND
 
 
 /*
- * Command line configuration.
+ * Env Storage Settings
  */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_JFFS2
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_DATE
-
-#if (CONFIG_DRIVER_SMC91111)
-#define CONFIG_CMD_PING
-#endif
-
-#if (CONFIG_SOFT_I2C)
-#define CONFIG_CMD_I2C
+#if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_SPI_MASTER)
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_ENV_OFFSET	0x4000
+#define CONFIG_ENV_SIZE		0x2000
+#define CONFIG_ENV_SECT_SIZE	0x2000
+#else
+#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_OFFSET	0x4000
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
+#define CONFIG_ENV_SIZE		0x2000
+#define CONFIG_ENV_SECT_SIZE	0x2000
 #endif
-
-#define CONFIG_CMD_DHCP
-
-
-/*
- * Console settings
- */
-
-#define CONFIG_BAUDRATE		57600
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
-#define	CONFIG_SYS_PROMPT		"bfin> "	/* Monitor Command Prompt */
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size */
+#if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_BYPASS)
+#define ENV_IS_EMBEDDED
 #else
-#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size */
+#define ENV_IS_EMBEDDED_CUSTOM
 #endif
-#define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS	16		/* max number of command args */
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
 
-#define CONFIG_LOADS_ECHO	1
 
 /*
- * I2C settings
+ * I2C Settings
  * By default PF2 is used as SDA and PF3 as SCL on the Stamp board
  */
-#if (CONFIG_SOFT_I2C)
-
-#define I2C_INIT		(*pFIO_DIR |=  PF_SCL); asm("ssync;")
-#define I2C_ACTIVE		(*pFIO_DIR |=  PF_SDA); *pFIO_INEN &= ~PF_SDA; asm("ssync;")
-#define I2C_TRISTATE		(*pFIO_DIR &= ~PF_SDA); *pFIO_INEN |= PF_SDA; asm("ssync;")
-#define I2C_READ		((volatile)(*pFIO_FLAG_D & PF_SDA) != 0); asm("ssync;")
-#define I2C_SDA(bit)	if(bit) { \
-				*pFIO_FLAG_S = PF_SDA; \
-				asm("ssync;"); \
-				} \
-			else	{ \
-				*pFIO_FLAG_C = PF_SDA; \
-				asm("ssync;"); \
-				}
-#define I2C_SCL(bit)	if(bit) { \
-				*pFIO_FLAG_S = PF_SCL; \
-				asm("ssync;"); \
-				} \
-			else	{ \
-				*pFIO_FLAG_C = PF_SCL; \
-				asm("ssync;"); \
-				}
+#define CONFIG_SOFT_I2C
+#ifdef CONFIG_SOFT_I2C
+#define PF_SCL PF3
+#define PF_SDA PF2
+#define I2C_INIT \
+	do { \
+		*pFIO_DIR |= PF_SCL; \
+		SSYNC(); \
+	} while (0)
+#define I2C_ACTIVE \
+	do { \
+		*pFIO_DIR |= PF_SDA; \
+		*pFIO_INEN &= ~PF_SDA; \
+		SSYNC(); \
+	} while (0)
+#define I2C_TRISTATE \
+	do { \
+		*pFIO_DIR &= ~PF_SDA; \
+		*pFIO_INEN |= PF_SDA; \
+		SSYNC(); \
+	} while (0)
+#define I2C_READ ((*pFIO_FLAG_D & PF_SDA) != 0)
+#define I2C_SDA(bit) \
+	do { \
+		if (bit) \
+			*pFIO_FLAG_S = PF_SDA; \
+		else \
+			*pFIO_FLAG_C = PF_SDA; \
+		SSYNC(); \
+	} while (0)
+#define I2C_SCL(bit) \
+	do { \
+		if (bit) \
+			*pFIO_FLAG_S = PF_SCL; \
+		else \
+			*pFIO_FLAG_C = PF_SCL; \
+		SSYNC(); \
+	} while (0)
 #define I2C_DELAY		udelay(5)	/* 1/4 I2C clock duration */
 
 #define CONFIG_SYS_I2C_SPEED		50000
 #define CONFIG_SYS_I2C_SLAVE		0
-#endif /* CONFIG_SOFT_I2C */
+#endif
+
 
 /*
- * Compact Flash settings
+ * Compact Flash / IDE / ATA Settings
  */
 
 /* Enabled below option for CF support */
-/* #define CONFIG_STAMP_CF	1 */
-
-#if defined(CONFIG_STAMP_CF) && defined(CONFIG_CMD_IDE)
-
-#define CONFIG_MISC_INIT_R	1
+/* #define CONFIG_STAMP_CF */
+#if defined(CONFIG_STAMP_CF)
+#define CONFIG_MISC_INIT_R
 #define CONFIG_DOS_PARTITION	1
-/*
- * IDE/ATA stuff
- */
 #undef  CONFIG_IDE_8xx_DIRECT		/* no pcmcia interface required */
 #undef  CONFIG_IDE_LED			/* no led for ide supported */
 #undef  CONFIG_IDE_RESET		/* no reset for ide supported */
 
-#define CONFIG_SYS_IDE_MAXBUS		1	/* max. 1 IDE busses */
-#define CONFIG_SYS_IDE_MAXDEVICE	(CONFIG_SYS_IDE_MAXBUS*1) /* max. 1 drives per IDE bus */
+#define CONFIG_SYS_IDE_MAXBUS		1
+#define CONFIG_SYS_IDE_MAXDEVICE	(CONFIG_SYS_IDE_MAXBUS * 1)
 
 #define CONFIG_SYS_ATA_BASE_ADDR	0x20200000
 #define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
 
-#define CONFIG_SYS_ATA_DATA_OFFSET	0x0020	/* Offset for data I/O */
-#define CONFIG_SYS_ATA_REG_OFFSET	0x0020	/* Offset for normal register accesses */
-#define CONFIG_SYS_ATA_ALT_OFFSET	0x0007	/* Offset for alternate registers */
+#define CONFIG_SYS_ATA_DATA_OFFSET	0x0020	/* data I/O */
+#define CONFIG_SYS_ATA_REG_OFFSET	0x0020	/* normal register accesses */
+#define CONFIG_SYS_ATA_ALT_OFFSET	0x0007	/* alternate registers */
 
 #define CONFIG_SYS_ATA_STRIDE		2
+
+#undef CONFIG_EBIU_AMBCTL1_VAL
+#define CONFIG_EBIU_AMBCTL1_VAL	0x99B3ffc2
 #endif
 
+
 /*
- * Miscellaneous configurable options
+ * Misc Settings
  */
+#define CONFIG_RTC_BFIN
+#define CONFIG_UART_CONSOLE	0
 
-#define	CONFIG_SYS_HZ			1000	/* 1ms time tick */
-
-#define CONFIG_SYS_BOOTM_LEN		0x4000000/* Large Image Length, set to 64 Meg */
-
-#define CONFIG_SHOW_BOOT_PROGRESS 1	/* Show boot progress on LEDs */
+/* FLASH/ETHERNET uses the same async bank */
+#define SHARED_RESOURCES 	1
 
-#define CONFIG_SPI
+/* define to enable boot progress via leds */
+/* #define CONFIG_SHOW_BOOT_PROGRESS */
 
-#ifdef  CONFIG_VIDEO
-#if (CONFIG_VIDEO)
-#define CONFIG_SPLASH_SCREEN	1
-#define CONFIG_SILENT_CONSOLE	1
-#else
-#undef CONFIG_VIDEO
+/* define to enable run status via led */
+/* #define CONFIG_STATUS_LED */
+#ifdef CONFIG_STATUS_LED
+#define CONFIG_BOARD_SPECIFIC_LED
+#ifndef __ASSEMBLY__
+typedef unsigned int led_id_t;
+void __led_init(led_id_t mask, int state);
+void __led_set(led_id_t mask, int state);
+void __led_toggle(led_id_t mask);
 #endif
+/* use LED1 to indicate booting/alive */
+#define STATUS_LED_BOOT 0
+#define STATUS_LED_BIT 1
+#define STATUS_LED_STATE STATUS_LED_ON
+#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 4)
+/* use LED2 to indicate crash */
+#define STATUS_LED_CRASH 1
+#define STATUS_LED_BIT1 2
+#define STATUS_LED_STATE1 STATUS_LED_ON
+#define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 2)
 #endif
 
-/*
- * FLASH organization and environment definitions
- */
+/* define to enable splash screen support */
+/* #define CONFIG_VIDEO */
 
-#define CONFIG_EBIU_SDRRC_VAL  0x268
-#define CONFIG_EBIU_SDGCTL_VAL 0x911109
-#define CONFIG_EBIU_SDBCTL_VAL 0x37
 
-#define CONFIG_EBIU_AMGCTL_VAL		0xFF
-#define CONFIG_EBIU_AMBCTL0_VAL		0xBBC3BBC3
-#define CONFIG_EBIU_AMBCTL1_VAL		0x99B39983
-#define CF_CONFIG_EBIU_AMBCTL1_VAL		0x99B3ffc2
+/*
+ * Pull in common ADI header for remaining command/environment setup
+ */
+#include <configs/bfin_adi_common.h>
 
 #include <asm/blackfin-config-post.h>
 
diff --git a/include/configs/bf537-stamp.h b/include/configs/bf537-stamp.h
index f6399a9..3e5862d 100644
--- a/include/configs/bf537-stamp.h
+++ b/include/configs/bf537-stamp.h
@@ -2,272 +2,144 @@
  * U-boot - Configuration file for BF537 STAMP board
  */
 
-#ifndef __CONFIG_BF537_H__
-#define __CONFIG_BF537_H__
+#ifndef __CONFIG_BF537_STAMP_H__
+#define __CONFIG_BF537_STAMP_H__
 
 #include <asm/blackfin-config-pre.h>
 
-#define CONFIG_SYS_LONGHELP		1
-#define CONFIG_CMDLINE_EDITING	1
-#define CONFIG_BAUDRATE		57600
-/* Set default serial console for bf537 */
-#define CONFIG_UART_CONSOLE	0
-#define CONFIG_BOOTDELAY	5
-/* define CONFIG_BF537_STAMP_LEDCMD to enable LED command*/
-/*#define CONFIG_BF537_STAMP_LEDCMD	1*/
-
-#define CONFIG_PANIC_HANG 1
 
-#define CONFIG_BFIN_CPU	bf537-0.2
-#define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_BYPASS
-
-#define CONFIG_BFIN_MAC
+/*
+ * Processor Settings
+ */
+#define CONFIG_BFIN_CPU             bf537-0.2
+#define CONFIG_BFIN_BOOT_MODE       BFIN_BOOT_BYPASS
 
-/* This sets the default state of the cache on U-Boot's boot */
-#define CONFIG_ICACHE_ON
-#define CONFIG_DCACHE_ON
 
-/* Define if want to do post memory test */
-#undef CONFIG_POST_TEST
-
-#define CONFIG_RTC_BFIN		1
-#define CONFIG_BOOT_RETRY_TIME	-1	/* Enable this if bootretry required, currently its disabled */
-
-/* CONFIG_CLKIN_HZ is any value in Hz				*/
-#define CONFIG_CLKIN_HZ		25000000
-/* CONFIG_CLKIN_HALF controls what is passed to PLL 0=CLKIN	*/
-/*						    1=CLKIN/2	*/
-#define CONFIG_CLKIN_HALF	0
-/* CONFIG_PLL_BYPASS controls if the PLL is used 0=don't bypass */
-/*						    1=bypass PLL*/
-#define CONFIG_PLL_BYPASS	0
-/* CONFIG_VCO_MULT controls what the multiplier of the PLL is.	*/
-/* Values can range from 1-64					*/
+/*
+ * Clock Settings
+ *	CCLK = (CLKIN * VCO_MULT) / CCLK_DIV
+ *	SCLK = (CLKIN * VCO_MULT) / SCLK_DIV
+ */
+/* CONFIG_CLKIN_HZ is any value in Hz					*/
+#define CONFIG_CLKIN_HZ			25000000
+/* CLKIN_HALF controls the DF bit in PLL_CTL      0 = CLKIN		*/
+/*                                                1 = CLKIN / 2		*/
+#define CONFIG_CLKIN_HALF		0
+/* PLL_BYPASS controls the BYPASS bit in PLL_CTL  0 = do not bypass	*/
+/*                                                1 = bypass PLL	*/
+#define CONFIG_PLL_BYPASS		0
+/* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL		*/
+/* Values can range from 0-63 (where 0 means 64)			*/
 #define CONFIG_VCO_MULT			20
-/* CONFIG_CCLK_DIV controls what the core clock divider is	*/
-/* Values can be 1, 2, 4, or 8 ONLY				*/
+/* CCLK_DIV controls the core clock divider				*/
+/* Values can be 1, 2, 4, or 8 ONLY					*/
 #define CONFIG_CCLK_DIV			1
-/* CONFIG_SCLK_DIV controls what the peripheral clock divider is*/
-/* Values can range from 1-15					*/
-#define CONFIG_SCLK_DIV			5
-/* CONFIG_SPI_BAUD controls the SPI peripheral clock divider	*/
-/* Values can range from 2-65535				*/
-/* SCK Frequency = SCLK / (2 * CONFIG_SPI_BAUD)			*/
-#define CONFIG_SPI_BAUD			2
-#define CONFIG_SPI_BAUD_INITBLOCK	4
-
-#if ( CONFIG_CLKIN_HALF == 0 )
-#define CONFIG_VCO_HZ ( CONFIG_CLKIN_HZ * CONFIG_VCO_MULT )
-#else
-#define CONFIG_VCO_HZ (( CONFIG_CLKIN_HZ * CONFIG_VCO_MULT ) / 2 )
-#endif
-
-#if (CONFIG_PLL_BYPASS == 0)
-#define CONFIG_CCLK_HZ ( CONFIG_VCO_HZ / CONFIG_CCLK_DIV )
-#define CONFIG_SCLK_HZ ( CONFIG_VCO_HZ / CONFIG_SCLK_DIV )
-#else
-#define CONFIG_CCLK_HZ CONFIG_CLKIN_HZ
-#define CONFIG_SCLK_HZ CONFIG_CLKIN_HZ
-#endif
-
-#define CONFIG_MEM_SIZE			64	/* 128, 64, 32, 16 */
-#define CONFIG_MEM_ADD_WDTH		10	/* 8, 9, 10, 11 */
-#define CONFIG_MEM_MT48LC32M8A2_75	1
+/* SCLK_DIV controls the system clock divider				*/
+/* Values can range from 1-15						*/
+#define CONFIG_SCLK_DIV			4
 
-#define CONFIG_LOADS_ECHO		1
 
 /*
- * rarpb, bootp or dhcp commands will perform only a
- * configuration lookup from the BOOTP/DHCP server
- * but not try to load any image using TFTP
+ * Memory Settings
  */
-#define CONFIG_SYS_AUTOLOAD			"no"
+#define CONFIG_MEM_ADD_WDTH	10
+#define CONFIG_MEM_SIZE		64
+
+#define CONFIG_EBIU_SDRRC_VAL	0x306
+#define CONFIG_EBIU_SDGCTL_VAL	0x91114d
+
+#define CONFIG_EBIU_AMGCTL_VAL	0xFF
+#define CONFIG_EBIU_AMBCTL0_VAL	0x7BB07BB0
+#define CONFIG_EBIU_AMBCTL1_VAL	0xFFC27BB0
+
+#define CONFIG_SYS_MONITOR_LEN		(512 * 1024)
+#define CONFIG_SYS_MALLOC_LEN		(384 * 1024)
+
 
 /*
  * Network Settings
  */
-/* network support */
-#ifdef CONFIG_BFIN_MAC
-#define CONFIG_IPADDR		192.168.0.15
-#define CONFIG_NETMASK		255.255.255.0
-#define CONFIG_GATEWAYIP	192.168.0.1
-#define CONFIG_SERVERIP		192.168.0.2
-#define CONFIG_HOSTNAME		BF537
+#ifndef __ADSPBF534__
+#define ADI_CMDS_NETWORK	1
+#define CONFIG_BFIN_MAC
+#define CONFIG_NETCONSOLE	1
+#define CONFIG_NET_MULTI	1
 #endif
-
-#define CONFIG_ROOTPATH		/romfs
+#define CONFIG_HOSTNAME		bf537-stamp
 /* Uncomment next line to use fixed MAC address */
 /* #define CONFIG_ETHADDR	02:80:ad:20:31:e8 */
-/* This is the routine that copies the MAC in Flash to the 'ethaddr' setting */
-
-#define CONFIG_SYS_LONGHELP		1
-#define CONFIG_BOOTDELAY	5
-#define CONFIG_BOOT_RETRY_TIME	-1	/* Enable this if bootretry required, currently its disabled */
-#define CONFIG_BOOTCOMMAND	"run ramboot"
-
-#if defined(CONFIG_POST_TEST)
-/* POST support */
-#define CONFIG_POST		( CONFIG_SYS_POST_MEMORY | \
-				  CONFIG_SYS_POST_UART	  | \
-				  CONFIG_SYS_POST_FLASH  | \
-				  CONFIG_SYS_POST_ETHER  | \
-				  CONFIG_SYS_POST_LED	  | \
-				  CONFIG_SYS_POST_BUTTON)
-#else
-#undef CONFIG_POST
-#endif
 
-#ifdef CONFIG_POST
-#define FLASH_START_POST_BLOCK	11	/* Should > = 11 */
-#define FLASH_END_POST_BLOCK	71	/* Should < = 71 */
-#endif
-
-/* CF-CARD IDE-HDD Support */
-
-/* #define CONFIG_BFIN_TRUE_IDE */	/* Add CF flash card support */
-/* #define CONFIG_BFIN_CF_IDE */	/* Add CF flash card support */
-/* #define CONFIG_BFIN_HDD_IDE */	/* Add IDE Disk Drive (HDD) support */
-
-#if defined(CONFIG_BFIN_CF_IDE) || defined(CONFIG_BFIN_HDD_IDE) || defined(CONFIG_BFIN_TRUE_IDE)
-# define CONFIG_BFIN_IDE	1
-#endif
-
-/*#define CONFIG_BF537_NAND */		/* Add nand flash support */
-
-#define CONFIG_NETCONSOLE	1
-#define CONFIG_NET_MULTI	1
 
 /*
- * BOOTP options
+ * Flash Settings
  */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_FLASH_CFI_DRIVER
+#define CONFIG_SYS_FLASH_BASE		0x20000000
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_SYS_FLASH_PROTECTION
+#define CONFIG_SYS_MAX_FLASH_BANKS	1
+/* some have 67 sectors (M29W320DB), but newer have 71 (M29W320EB) */
+#define CONFIG_SYS_MAX_FLASH_SECT	71
 
 
 /*
- * Command line configuration.
+ * SPI Settings
  */
-#include <config_cmd_default.h>
+#define CONFIG_BFIN_SPI
+#define CONFIG_ENV_SPI_MAX_HZ	30000000
+#define CONFIG_SF_DEFAULT_HZ	30000000
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_ATMEL
+#define CONFIG_SPI_FLASH_SPANSION
+#define CONFIG_SPI_FLASH_STMICRO
+#define CONFIG_SPI_FLASH_WINBOND
 
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_JFFS2
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_DATE
 
-#ifndef CONFIG_BFIN_MAC
-#undef CONFIG_CMD_NET
+/*
+ * Env Storage Settings
+ */
+#if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_SPI_MASTER)
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_ENV_OFFSET	0x4000
+#define CONFIG_ENV_SIZE		0x2000
+#define CONFIG_ENV_SECT_SIZE	0x2000
 #else
-#define CONFIG_CMD_PING
-#endif
-
-#if defined(CONFIG_BFIN_CF_IDE) \
-	|| defined(CONFIG_BFIN_HDD_IDE) \
-	|| defined(CONFIG_BFIN_TRUE_IDE)
-#define CONFIG_CMD_IDE
-#endif
-
-#define CONFIG_CMD_DHCP
-
-#if defined(CONFIG_POST)
-#define CONFIG_CMD_DIAG
-#endif
-
-#ifdef CONFIG_BF537_NAND
-#define CONFIG_CMD_NAND
+#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_OFFSET	0x4000
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
+#define CONFIG_ENV_SIZE		0x2000
+#define CONFIG_ENV_SECT_SIZE	0x2000
 #endif
-
-
-#define CONFIG_BOOTARGS "root=/dev/mtdblock0 rw console=ttyBF0,57600"
-#define CONFIG_LOADADDR	0x1000000
-
-#define CONFIG_EXTRA_ENV_SETTINGS				\
-	"ramargs=setenv bootargs root=/dev/mtdblock0 rw console=ttyBF0,57600\0"	\
-	"nfsargs=setenv bootargs root=/dev/nfs rw "		\
-	"nfsroot=$(serverip):$(rootpath) console=ttyBF0,57600\0"\
-	"addip=setenv bootargs $(bootargs) "			\
-	"ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)"	\
-	":$(hostname):eth0:off\0"				\
-	"ramboot=tftpboot $(loadaddr) linux;"			\
-	"run ramargs;run addip;bootelf\0"			\
-	"nfsboot=tftpboot $(loadaddr) linux;"			\
-	"run nfsargs;run addip;bootelf\0"			\
-	"flashboot=bootm 0x20100000\0"				\
-	"update=tftpboot $(loadaddr) u-boot.bin;"		\
-	"protect off 0x20000000 0x2007FFFF;"			\
-	"erase 0x20000000 0x2007FFFF;cp.b 0x1000000 0x20000000 $(filesize)\0"	\
-	""
-
-#define	CONFIG_SYS_PROMPT		"bfin> "	/* Monitor Command Prompt */
-
-#if defined(CONFIG_CMD_KGDB)
-#define	CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size */
+#if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_BYPASS)
+#define ENV_IS_EMBEDDED
 #else
-#define	CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size */
+#define ENV_IS_EMBEDDED_CUSTOM
 #endif
-#define CONFIG_SYS_MAX_RAM_SIZE	(CONFIG_MEM_SIZE * 1024*1024)
-#define	CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size */
-#define	CONFIG_SYS_MAXARGS		16	/* max number of command args */
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
-#define CONFIG_SYS_MEMTEST_START	0x0	/* memtest works on */
-#define CONFIG_SYS_MEMTEST_END		( (CONFIG_MEM_SIZE - 1) * 1024*1024)	/* 1 ... 63 MB in DRAM */
-#define	CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR	/* default load address */
-#define	CONFIG_SYS_HZ			1000	/* decrementer freq: 10 ms ticks */
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-#define	CONFIG_SYS_SDRAM_BASE		0x00000000
-
-#define CONFIG_SYS_FLASH_BASE		0x20000000
-#define CONFIG_SYS_FLASH_CFI		/* The flash is CFI compatible */
-#define CONFIG_FLASH_CFI_DRIVER	/* Use common CFI driver */
-#define CONFIG_SYS_FLASH_PROTECTION
-#define CONFIG_SYS_MAX_FLASH_BANKS	1
-#define CONFIG_SYS_MAX_FLASH_SECT	71	/* some have 67 sectors (M29W320DB), but newer have 71 (M29W320EB) */
 
-#define	CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
-#define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_MAX_RAM_SIZE - CONFIG_SYS_MONITOR_LEN)
-#define	CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
-#define CONFIG_SYS_MALLOC_BASE		(CONFIG_SYS_MONITOR_BASE - CONFIG_SYS_MALLOC_LEN)
-#define CONFIG_SYS_GBL_DATA_SIZE	0x4000
-#define CONFIG_SYS_GBL_DATA_ADDR	(CONFIG_SYS_MALLOC_BASE - CONFIG_SYS_GBL_DATA_SIZE)
-#define CONFIG_STACKBASE	(CONFIG_SYS_GBL_DATA_ADDR  - 4)
 
-#if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_SPI_MASTER)
-#define CONFIG_ENV_IS_IN_EEPROM	1
-#define CONFIG_ENV_OFFSET		0x4000
-#define CONFIG_ENV_HEADER		(CONFIG_ENV_OFFSET + 0x16e) /* 0x12A is the length of LDR file header */
-#else
-#define	CONFIG_ENV_IS_IN_FLASH	1
-#define CONFIG_ENV_ADDR		0x20004000
-#define CONFIG_ENV_OFFSET		(CONFIG_ENV_ADDR - CONFIG_SYS_FLASH_BASE)
-#endif
-#define CONFIG_ENV_SIZE		0x2000
-#define	CONFIG_ENV_SECT_SIZE	0x2000	/* Total Size of Environment Sector */
-#define ENV_IS_EMBEDDED
-
-/* JFFS Partition offset set  */
-#define CONFIG_SYS_JFFS2_FIRST_BANK	0
-#define CONFIG_SYS_JFFS2_NUM_BANKS	1
-/* 512k reserved for u-boot */
-#define CONFIG_SYS_JFFS2_FIRST_SECTOR	15
+/*
+ * I2C Settings
+ */
+#define CONFIG_BFIN_TWI_I2C	1
+#define CONFIG_HARD_I2C		1
+#define CONFIG_SYS_I2C_SPEED	50000
+#define CONFIG_SYS_I2C_SLAVE	0
 
-#define CONFIG_SPI
 
 /*
- * Stack sizes
+ * SPI_MMC Settings
  */
-#define CONFIG_STACKSIZE	(128*1024)	/* regular stack */
+#define CONFIG_MMC
+#define CONFIG_BFIN_SPI_MMC
 
-#define POLL_MODE		1
-#define FLASH_TOT_SECT		71
-#define FLASH_SIZE		0x400000
-#define CONFIG_SYS_FLASH_SIZE		0x400000
 
 /*
- * Board NAND Infomation
+ * NAND Settings
  */
+/* #define CONFIG_BF537_NAND */
+#ifdef CONFIG_BF537_NAND
+# define CONFIG_CMD_NAND
+#endif
 
 #define CONFIG_SYS_NAND_ADDR		0x20212000
 #define CONFIG_SYS_NAND_BASE		CONFIG_SYS_NAND_ADDR
@@ -280,56 +152,35 @@
 #define NAND_MAX_FLOORS		1
 #define BFIN_NAND_READY		PF3
 
-#define NAND_WAIT_READY(nand)			\
-	do {					\
-		int timeout = 0;		\
-		while(!(*pPORTFIO & PF3))	\
-			if (timeout++ > 100000)	\
-				break;		\
+#define NAND_WAIT_READY(nand) \
+	do { \
+		int timeout = 0; \
+		while (!(*pPORTFIO & PF3)) \
+			if (timeout++ > 100000) \
+				break; \
 	} while (0)
 
-#define BFIN_NAND_CLE		(1<<2)	/* A2 -> Command Enable */
-#define BFIN_NAND_ALE		(1<<1)	/* A1 -> Address Enable */
-
-#define WRITE_NAND_COMMAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr | BFIN_NAND_CLE) = (__u8)(d); } while(0)
-#define WRITE_NAND_ADDRESS(d, adr) do{ *(volatile __u8 *)((unsigned long)adr | BFIN_NAND_ALE) = (__u8)(d); } while(0)
-#define WRITE_NAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)d; } while(0)
-#define READ_NAND(adr) ((volatile unsigned char)(*(volatile __u8 *)(unsigned long)adr))
-
-/*
- * Initialize PSD4256 registers for using I2C
- */
-#define CONFIG_MISC_INIT_R
+#define BFIN_NAND_CLE		(1 << 2)	/* A2 -> Command Enable */
+#define BFIN_NAND_ALE		(1 << 1)	/* A1 -> Address Enable */
+#define WRITE_NAND_COMMAND(d, adr) bfin_write8(adr | BFIN_NAND_CLE, d)
+#define WRITE_NAND_ADDRESS(d, adr) bfin_write8(adr | BFIN_NAND_ALE, d)
+#define WRITE_NAND(d, adr)         bfin_write8(adr, d)
+#define READ_NAND(adr)             bfin_read8(adr)
 
-#define CONFIG_SYS_BOOTM_LEN		0x4000000	/* Large Image Length, set to 64 Meg */
 
 /*
- * I2C settings
+ * CF-CARD IDE-HDD Support
  */
-#define CONFIG_HARD_I2C		1
-#define CONFIG_BFIN_TWI_I2C	1
-#define CONFIG_SYS_I2C_SPEED	50000
-#define CONFIG_SYS_I2C_SLAVE	0
-
-#define CONFIG_EBIU_SDRRC_VAL  0x306
-#define CONFIG_EBIU_SDGCTL_VAL 0x91114d
-#define CONFIG_EBIU_SDBCTL_VAL 0x25
-
-#define CONFIG_EBIU_AMGCTL_VAL		0xFF
-#define CONFIG_EBIU_AMBCTL0_VAL		0x7BB07BB0
-#define CONFIG_EBIU_AMBCTL1_VAL		0xFFC27BB0
-
-/* 0xFF, 0x7BB07BB0, 0x22547BB0 */
-/* #define AMGCTLVAL		(AMBEN_P0 | AMBEN_P1 | AMBEN_P2 | AMCKEN)
-#define AMBCTL0VAL		(B1WAT_7 | B1RAT_11 | B1HT_2 | B1ST_3 | B1TT_4 | ~B1RDYPOL | \
-				~B1RDYEN | B0WAT_7 | B0RAT_11 | B0HT_2 | B0ST_3 | B0TT_4 | ~B0RDYPOL | ~B0RDYEN)
-#define AMBCTL1VAL		(B3WAT_2 | B3RAT_2 | B3HT_1 | B3ST_1 | B3TT_4 | B3RDYPOL | ~B3RDYEN | \
-				B2WAT_7 | B2RAT_11 | B2HT_2 | B2ST_3 | B2TT_4 | ~B2RDYPOL | ~B2RDYEN)
-*/
+/* #define CONFIG_BFIN_TRUE_IDE */	/* Add CF flash card support */
+/* #define CONFIG_BFIN_CF_IDE */	/* Add CF flash card support */
+/* #define CONFIG_BFIN_HDD_IDE */	/* Add IDE Disk Drive (HDD) support */
 
-#define AMGCTLVAL		0xFF
-#define AMBCTL0VAL		0x7BB07BB0
-#define AMBCTL1VAL		0xFFC27BB0
+#if defined(CONFIG_BFIN_CF_IDE) || \
+    defined(CONFIG_BFIN_HDD_IDE) || \
+    defined(CONFIG_BFIN_TRUE_IDE)
+# define CONFIG_BFIN_IDE	1
+# define CONFIG_CMD_IDE
+#endif
 
 #if defined(CONFIG_BFIN_IDE)
 
@@ -341,11 +192,11 @@
 #undef  CONFIG_IDE_LED		/* no led for ide supported */
 #undef  CONFIG_IDE_RESET	/* no reset for ide supported */
 
-#define CONFIG_SYS_IDE_MAXBUS		1	/* max. 1 IDE busses */
-#define CONFIG_SYS_IDE_MAXDEVICE	(CONFIG_SYS_IDE_MAXBUS*1)	/* max. 1 drives per IDE bus */
+#define CONFIG_SYS_IDE_MAXBUS		1
+#define CONFIG_SYS_IDE_MAXDEVICE	(CONFIG_SYS_IDE_MAXBUS * 1)
 
-#undef  AMBCTL1VAL
-#define AMBCTL1VAL		0xFFC3FFC3
+#undef  CONFIG_EBIU_AMBCTL1_VAL
+#define CONFIG_EBIU_AMBCTL1_VAL		0xFFC3FFC3
 
 #define CONFIG_CF_ATASEL_DIS	0x20311800
 #define CONFIG_CF_ATASEL_ENA	0x20311802
@@ -357,34 +208,54 @@
  */
 #define CONFIG_SYS_ATA_BASE_ADDR	0x2031C000
 #define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
-#define CONFIG_SYS_ATA_DATA_OFFSET	0x0020	/* Offset for data I/O */
-#define CONFIG_SYS_ATA_REG_OFFSET	0x0020	/* Offset for normal register accesses */
-#define CONFIG_SYS_ATA_ALT_OFFSET	0x001C	/* Offset for alternate registers */
+#define CONFIG_SYS_ATA_DATA_OFFSET	0x0020	/* data I/O */
+#define CONFIG_SYS_ATA_REG_OFFSET	0x0020	/* normal register accesses */
+#define CONFIG_SYS_ATA_ALT_OFFSET	0x001C	/* alternate registers */
 #define CONFIG_SYS_ATA_STRIDE		2	/* CF.A0 --> Blackfin.Ax */
-#endif				/* CONFIG_BFIN_TRUE_IDE */
 
-#if defined(CONFIG_BFIN_CF_IDE)	/* USE CompactFlash Storage Card in the common memory space */
+#elif defined(CONFIG_BFIN_CF_IDE)
 #define CONFIG_SYS_ATA_BASE_ADDR	0x20211800
 #define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
-#define CONFIG_SYS_ATA_DATA_OFFSET	0x0000	/* Offset for data I/O */
-#define CONFIG_SYS_ATA_REG_OFFSET	0x0000	/* Offset for normal register accesses */
-#define CONFIG_SYS_ATA_ALT_OFFSET	0x000E	/* Offset for alternate registers */
+#define CONFIG_SYS_ATA_DATA_OFFSET	0x0000	/* data I/O */
+#define CONFIG_SYS_ATA_REG_OFFSET	0x0000	/* normal register accesses */
+#define CONFIG_SYS_ATA_ALT_OFFSET	0x000E	/* alternate registers */
 #define CONFIG_SYS_ATA_STRIDE		1	/* CF.A0 --> Blackfin.Ax */
-#endif				/* CONFIG_BFIN_CF_IDE */
 
-#if defined(CONFIG_BFIN_HDD_IDE)	/* USE TRUE IDE */
+#elif defined(CONFIG_BFIN_HDD_IDE)
 #define CONFIG_SYS_ATA_BASE_ADDR	0x20314000
 #define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
-#define CONFIG_SYS_ATA_DATA_OFFSET	0x0020	/* Offset for data I/O */
-#define CONFIG_SYS_ATA_REG_OFFSET	0x0020	/* Offset for normal register accesses */
-#define CONFIG_SYS_ATA_ALT_OFFSET	0x001C	/* Offset for alternate registers */
+#define CONFIG_SYS_ATA_DATA_OFFSET	0x0020	/* data I/O */
+#define CONFIG_SYS_ATA_REG_OFFSET	0x0020	/* normal register accesses */
+#define CONFIG_SYS_ATA_ALT_OFFSET	0x001C	/* alternate registers */
 #define CONFIG_SYS_ATA_STRIDE		2	/* CF.A0 --> Blackfin.A1 */
-
 #undef  CONFIG_SCLK_DIV
 #define CONFIG_SCLK_DIV		8
-#endif				/* CONFIG_BFIN_HDD_IDE */
+#endif
+
+#endif
 
-#endif				/*CONFIG_BFIN_IDE */
+
+/*
+ * Misc Settings
+ */
+#define CONFIG_MISC_INIT_R
+#define CONFIG_RTC_BFIN
+#define CONFIG_UART_CONSOLE	0
+
+/* #define CONFIG_BF537_STAMP_LEDCMD	1 */
+
+/* Define if want to do post memory test */
+#undef CONFIG_POST
+#ifdef CONFIG_POST
+#define FLASH_START_POST_BLOCK	11	/* Should > = 11 */
+#define FLASH_END_POST_BLOCK	71	/* Should < = 71 */
+#endif
+
+
+/*
+ * Pull in common ADI header for remaining command/environment setup
+ */
+#include <configs/bfin_adi_common.h>
 
 #include <asm/blackfin-config-post.h>
 
diff --git a/include/configs/bf561-ezkit.h b/include/configs/bf561-ezkit.h
index 320a8c6..ef2019f 100644
--- a/include/configs/bf561-ezkit.h
+++ b/include/configs/bf561-ezkit.h
@@ -2,229 +2,152 @@
  * U-boot - Configuration file for BF561 EZKIT board
  */
 
-#ifndef __CONFIG_EZKIT561_H__
-#define __CONFIG_EZKIT561_H__
+#ifndef __CONFIG_BF561_EZKIT_H__
+#define __CONFIG_BF561_EZKIT_H__
 
 #include <asm/blackfin-config-pre.h>
 
-#define CONFIG_SYS_LONGHELP		1
-#define CONFIG_CMDLINE_EDITING	1
-#define CONFIG_BAUDRATE		57600
-/* Set default serial console for bf537 */
-#define CONFIG_UART_CONSOLE	0
-#define CONFIG_EZKIT561		1
-#define CONFIG_BOOTDELAY	5
-
-#define CONFIG_PANIC_HANG 1
-
-#define CONFIG_BFIN_CPU	bf561-0.3
-#define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_BYPASS
-
-/* This sets the default state of the cache on U-Boot's boot */
-#define CONFIG_ICACHE_ON
-#define CONFIG_DCACHE_ON
 
 /*
- * Board settings
+ * Processor Settings
  */
-#define CONFIG_DRIVER_SMC91111	1
-#define CONFIG_SMC91111_BASE	0x2C010300
-#define CONFIG_ASYNC_EBIU_BASE	CONFIG_SMC91111_BASE & ~(4*1024*1024)
-#define CONFIG_SMC_USE_32_BIT	1
-#define CONFIG_MISC_INIT_R	1
-
-/*
- * Clock settings
- */
-
-/* CONFIG_CLKIN_HZ is any value in Hz				*/
-#define CONFIG_CLKIN_HZ		30000000
-/* CONFIG_CLKIN_HALF controls what is passed to PLL 0=CLKIN	*/
-/*						    1=CLKIN/2	*/
-#define CONFIG_CLKIN_HALF	0
-/* CONFIG_PLL_BYPASS controls if the PLL is used 0=don't bypass	*/
-/*						 1=bypass PLL	*/
-#define CONFIG_PLL_BYPASS	0
-/* CONFIG_VCO_MULT controls what the multiplier of the PLL is	*/
-/* Values can range from 1-64					*/
-#define CONFIG_VCO_MULT		20
-/* CONFIG_CCLK_DIV controls what the core clock divider is	*/
-/* Values can be 1, 2, 4, or 8 ONLY				*/
-#define CONFIG_CCLK_DIV		1
-/* CONFIG_SCLK_DIV controls what the peripheral clock divider is */
-/* Values can range from 1-15					*/
-#define CONFIG_SCLK_DIV		5
-/* CONFIG_SPI_BAUD controls the SPI peripheral clock divider	*/
-/* Values can range from 2-65535				*/
-/* SCK Frequency = SCLK / (2 * CONFIG_SPI_BAUD)			*/
-#define CONFIG_SPI_BAUD		2
-#define CONFIG_SPI_BAUD_INITBLOCK	4
+#define CONFIG_BFIN_CPU             bf561-0.3
+#define CONFIG_BFIN_BOOT_MODE       BFIN_BOOT_BYPASS
 
-/*
- * Network settings
- */
-#if (CONFIG_DRIVER_SMC91111)
-#define CONFIG_IPADDR		192.168.0.15
-#define CONFIG_NETMASK		255.255.255.0
-#define CONFIG_GATEWAYIP	192.168.0.1
-#define CONFIG_SERVERIP		192.168.0.2
-#define CONFIG_HOSTNAME		ezkit561
-#define CONFIG_ROOTPATH		/arm-cross-build/BF561/uClinux-dist/romfs
-#endif				/* CONFIG_DRIVER_SMC91111 */
 
 /*
- * Flash settings
+ * Clock Settings
+ *	CCLK = (CLKIN * VCO_MULT) / CCLK_DIV
+ *	SCLK = (CLKIN * VCO_MULT) / SCLK_DIV
  */
+/* CONFIG_CLKIN_HZ is any value in Hz					*/
+#define CONFIG_CLKIN_HZ			30000000
+/* CLKIN_HALF controls the DF bit in PLL_CTL      0 = CLKIN		*/
+/*                                                1 = CLKIN / 2		*/
+#define CONFIG_CLKIN_HALF		0
+/* PLL_BYPASS controls the BYPASS bit in PLL_CTL  0 = do not bypass	*/
+/*                                                1 = bypass PLL	*/
+#define CONFIG_PLL_BYPASS		0
+/* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL		*/
+/* Values can range from 0-63 (where 0 means 64)			*/
+#define CONFIG_VCO_MULT			20
+/* CCLK_DIV controls the core clock divider				*/
+/* Values can be 1, 2, 4, or 8 ONLY					*/
+#define CONFIG_CCLK_DIV			1
+/* SCLK_DIV controls the system clock divider				*/
+/* Values can range from 1-15						*/
+#define CONFIG_SCLK_DIV			6
 
-#define CONFIG_SYS_FLASH_CFI		/* The flash is CFI compatible */
-#define CONFIG_FLASH_CFI_DRIVER	/* Use common CFI driver */
-#define CONFIG_SYS_FLASH_CFI_AMD_RESET
-#define	CONFIG_ENV_IS_IN_FLASH	1
-#define CONFIG_SYS_FLASH_BASE		0x20000000
-#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT	135	/* max number of sectors on one chip */
-#define CONFIG_ENV_ADDR		0x20020000
-#define	CONFIG_ENV_SECT_SIZE	0x10000	/* Total Size of Environment Sector */
-/* JFFS Partition offset set  */
-#define CONFIG_SYS_JFFS2_FIRST_BANK	0
-#define CONFIG_SYS_JFFS2_NUM_BANKS	1
-/* 512k reserved for u-boot */
-#define CONFIG_SYS_JFFS2_FIRST_SECTOR	8
 
 /*
- * SDRAM settings & memory map
+ * Memory Settings
  */
+#define CONFIG_MEM_ADD_WDTH	9
+#define CONFIG_MEM_SIZE		64
 
-#define CONFIG_MEM_SIZE			64	/* 128, 64, 32, 16 */
-#define CONFIG_MEM_ADD_WDTH		9	/* 8, 9, 10, 11    */
-#define CONFIG_MEM_MT48LC16M16A2TG_75	1
-
-#define	CONFIG_SYS_SDRAM_BASE		0x00000000
-#define CONFIG_SYS_MAX_RAM_SIZE	(CONFIG_MEM_SIZE * 1024 * 1024)
-
-#define CONFIG_SYS_MEMTEST_START	0x0	/* memtest works on */
-#define CONFIG_SYS_MEMTEST_END		( (CONFIG_MEM_SIZE - 1) * 1024*1024)	/* 1 ... 63 MB in DRAM */
+#define CONFIG_EBIU_SDRRC_VAL	0x306
+#define CONFIG_EBIU_SDGCTL_VAL	0x91114d
 
-#define	CONFIG_LOADADDR		0x01000000	/* default load address */
-#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
-#define	CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor   */
-#define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_MAX_RAM_SIZE - CONFIG_SYS_MONITOR_LEN)
+#define CONFIG_EBIU_AMGCTL_VAL	0x3F
+#define CONFIG_EBIU_AMBCTL0_VAL	0x7BB07BB0
+#define CONFIG_EBIU_AMBCTL1_VAL	0xFFC27BB0
 
-#define	CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()  */
-#define CONFIG_SYS_MALLOC_BASE		(CONFIG_SYS_MONITOR_BASE - CONFIG_SYS_MALLOC_LEN)
+#define CONFIG_SYS_MONITOR_LEN	(256 * 1024)
+#define CONFIG_SYS_MALLOC_LEN	(128 * 1024)
 
-#define CONFIG_SYS_GBL_DATA_SIZE	0x4000
-#define CONFIG_SYS_GBL_DATA_ADDR	(CONFIG_SYS_MALLOC_BASE - CONFIG_SYS_GBL_DATA_SIZE)
-#define CONFIG_STACKBASE	(CONFIG_SYS_GBL_DATA_ADDR  - 4)
-#define CONFIG_STACKSIZE	(128*1024)	/* regular stack */
-
-#if ( CONFIG_CLKIN_HALF == 0 )
-#define CONFIG_VCO_HZ		( CONFIG_CLKIN_HZ * CONFIG_VCO_MULT )
-#else
-#define CONFIG_VCO_HZ		(( CONFIG_CLKIN_HZ * CONFIG_VCO_MULT ) / 2 )
-#endif
-
-#if (CONFIG_PLL_BYPASS == 0)
-#define CONFIG_CCLK_HZ		( CONFIG_VCO_HZ / CONFIG_CCLK_DIV )
-#define CONFIG_SCLK_HZ		( CONFIG_VCO_HZ / CONFIG_SCLK_DIV )
-#else
-#define CONFIG_CCLK_HZ		CONFIG_CLKIN_HZ
-#define CONFIG_SCLK_HZ		CONFIG_CLKIN_HZ
-#endif
 
 /*
- * Command settings
+ * Network Settings
  */
+#define ADI_CMDS_NETWORK	1
+#define CONFIG_DRIVER_SMC91111	1
+#define CONFIG_SMC91111_BASE	0x2C010300
+#define CONFIG_SMC_USE_32_BIT	1
+#define CONFIG_HOSTNAME		bf561-ezkit
+/* Uncomment next line to use fixed MAC address */
+/* #define CONFIG_ETHADDR	02:80:ad:20:31:e8 */
 
-#define CONFIG_SYS_AUTOLOAD	"no"	/* rarpb, bootp, dhcp commands will	*/
-				/* only perform a configuration		*/
-				/* lookup from the BOOTP/DHCP server	*/
-				/* but not try to load any image	*/
-				/* using TFTP				*/
-#define CONFIG_BOOT_RETRY_TIME	-1	/* Enable this if bootretry required, */
-					/* currently its disabled */
-#define CONFIG_BOOTCOMMAND	"run ramboot"
-#define CONFIG_BOOTARGS		"root=/dev/mtdblock0 rw console=ttyBF0,57600"
-
-#if (CONFIG_DRIVER_SMC91111)
-#define CONFIG_EXTRA_ENV_SETTINGS \
-	"ramargs=setenv bootargs root=/dev/mtdblock0 rw console=ttyBF0,57600\0"	 \
-	"nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):"	\
-		"$(rootpath) console=ttyBF0,57600\0"			\
-	"addip=setenv bootargs $(bootargs) ip=$(ipaddr):$(serverip):"	\
-		"$(gatewayip):$(netmask):$(hostname):eth0:off\0"	\
-	"ramboot=tftpboot $(loadaddr) linux; "				\
-		"run ramargs; run addip; bootelf\0"			\
-	"nfsboot=tftpboot $(loadaddr) linux; "				\
-		"run nfsargs; run addip; bootelf\0"			\
-	"update=tftpboot $(loadaddr) u-boot.bin; "			\
-		"protect off 0x20000000 0x2003FFFF; "			\
-		"erase 0x20000000 0x2003FFFF; "				\
-		"cp.b $(loadaddr) 0x20000000 $(filesize)\0"		\
-	""
-#else
-#define CONFIG_EXTRA_ENV_SETTINGS \
-	"ramargs=setenv bootargs root=/dev/mtdblock0 rw console=ttyBF0,57600\0"	 \
-	"flashboot=bootm 0x20100000\0"					\
-	""
-#endif
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
 
 /*
- * Command line configuration.
+ * Flash Settings
  */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_JFFS2
-
-#if defined(CONFIG_DRIVER_SMC91111)
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_FLASH_CFI_DRIVER
+#define CONFIG_SYS_FLASH_CFI_AMD_RESET
+#define CONFIG_SYS_FLASH_BASE		0x20000000
+#define CONFIG_SYS_MAX_FLASH_BANKS	1
+#define CONFIG_SYS_MAX_FLASH_SECT	135
+/* The BF561-EZKIT uses a top boot flash */
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_ADDR		0x20004000
+#define CONFIG_ENV_OFFSET	(CONFIG_ENV_ADDR - CONFIG_SYS_FLASH_BASE)
+#define CONFIG_ENV_SIZE		0x2000
+#define CONFIG_ENV_SECT_SIZE	0x10000
+#if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_BYPASS)
+#define ENV_IS_EMBEDDED
+#else
+#define ENV_IS_EMBEDDED_CUSTOM
 #endif
 
+
 /*
- * Console settings
+ * I2C Settings
  */
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
-#define	CONFIG_SYS_PROMPT		"bfin> "	/* Monitor Command Prompt */
-
-#if defined(CONFIG_CMD_KGDB)
-#define	CONFIG_SYS_CBSIZE		1024		/* Console I/O Buffer Size */
-#else
-#define	CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size */
+#define CONFIG_SOFT_I2C
+#ifdef CONFIG_SOFT_I2C
+#define PF_SCL PF0
+#define PF_SDA PF1
+#define I2C_INIT \
+	do { \
+		*pFIO0_DIR |= PF_SCL; \
+		SSYNC(); \
+	} while (0)
+#define I2C_ACTIVE \
+	do { \
+		*pFIO0_DIR |= PF_SDA; \
+		*pFIO0_INEN &= ~PF_SDA; \
+		SSYNC(); \
+	} while (0)
+#define I2C_TRISTATE \
+	do { \
+		*pFIO0_DIR &= ~PF_SDA; \
+		*pFIO0_INEN |= PF_SDA; \
+		SSYNC(); \
+	} while (0)
+#define I2C_READ ((*pFIO0_FLAG_D & PF_SDA) != 0)
+#define I2C_SDA(bit) \
+	do { \
+		if (bit) \
+			*pFIO0_FLAG_S = PF_SDA; \
+		else \
+			*pFIO0_FLAG_C = PF_SDA; \
+		SSYNC(); \
+	} while (0)
+#define I2C_SCL(bit) \
+	do { \
+		if (bit) \
+			*pFIO0_FLAG_S = PF_SCL; \
+		else \
+			*pFIO0_FLAG_C = PF_SCL; \
+		SSYNC(); \
+	} while (0)
+#define I2C_DELAY		udelay(5)	/* 1/4 I2C clock duration */
+
+#define CONFIG_SYS_I2C_SPEED		50000
+#define CONFIG_SYS_I2C_SLAVE		0
 #endif
-#define	CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size */
-#define	CONFIG_SYS_MAXARGS		16		/* max number of command args */
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
 
-#define CONFIG_LOADS_ECHO	1
 
 /*
- * Miscellaneous configurable options
+ * Misc Settings
  */
-#define	CONFIG_SYS_HZ			1000		/* decrementer freq: 10 ms ticks */
-#define CONFIG_SYS_BOOTM_LEN		0x4000000	/* Large Image Length, set to 64 Meg */
+#define CONFIG_UART_CONSOLE	0
+
 
 /*
- * FLASH organization and environment definitions
+ * Pull in common ADI header for remaining command/environment setup
  */
-#define CONFIG_EBIU_SDRRC_VAL  0x306
-#define CONFIG_EBIU_SDGCTL_VAL 0x91114d
-#define CONFIG_EBIU_SDBCTL_VAL 0x15
-
-#define CONFIG_EBIU_AMGCTL_VAL		0x3F
-#define CONFIG_EBIU_AMBCTL0_VAL		0x7BB07BB0
-#define CONFIG_EBIU_AMBCTL1_VAL		0xFFC27BB0
+#include <configs/bfin_adi_common.h>
 
 #include <asm/blackfin-config-post.h>
 
diff --git a/include/configs/bfin_adi_common.h b/include/configs/bfin_adi_common.h
new file mode 100644
index 0000000..bfe5376
--- /dev/null
+++ b/include/configs/bfin_adi_common.h
@@ -0,0 +1,199 @@
+/*
+ * U-Boot - Common settings for Analog Devices boards
+ */
+
+#ifndef __CONFIG_BFIN_ADI_COMMON_H__
+#define __CONFIG_BFIN_ADI_COMMON_H__
+
+/*
+ * Command Settings
+ */
+#ifndef _CONFIG_CMD_DEFAULT_H
+# include <config_cmd_default.h>
+# if ADI_CMDS_NETWORK
+#  define CONFIG_CMD_DHCP
+#  define CONFIG_CMD_PING
+#  ifdef CONFIG_BFIN_MAC
+#   define CONFIG_CMD_MII
+#  endif
+# else
+#  undef CONFIG_CMD_BOOTD
+#  undef CONFIG_CMD_NET
+#  undef CONFIG_CMD_NFS
+# endif
+# ifdef CONFIG_LIBATA
+#  define CONFIG_CMD_FAT
+#  define CONFIG_CMD_SATA
+#  define CONFIG_DOS_PARTITION
+# endif
+# ifdef CONFIG_MMC
+#  define CONFIG_CMD_FAT
+#  define CONFIG_CMD_MMC
+#  define CONFIG_DOS_PARTITION
+# endif
+# ifdef CONFIG_USB
+#  define CONFIG_CMD_EXT2
+#  define CONFIG_CMD_FAT
+#  define CONFIG_CMD_USB
+#  define CONFIG_CMD_USB_STORAGE
+#  define CONFIG_DOS_PARTITION
+# endif
+# ifdef CONFIG_POST
+#  define CONFIG_CMD_DIAG
+# endif
+# ifdef CONFIG_RTC_BFIN
+#  define CONFIG_CMD_DATE
+# endif
+# ifdef CONFIG_SPI
+#  define CONFIG_CMD_EEPROM
+# endif
+# if defined(CONFIG_BFIN_SPI) || defined(CONFIG_SOFT_SPI)
+#  define CONFIG_CMD_SPI
+# endif
+# ifdef CONFIG_SPI_FLASH
+#  define CONFIG_CMD_SF
+# endif
+# if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
+#  define CONFIG_CMD_I2C
+# endif
+# ifdef CONFIG_SYS_NO_FLASH
+#  undef CONFIG_CMD_FLASH
+#  undef CONFIG_CMD_IMLS
+# else
+#  define CONFIG_CMD_JFFS2
+# endif
+# define CONFIG_CMD_BOOTLDR
+# define CONFIG_CMD_CACHE
+# define CONFIG_CMD_CPLBINFO
+# define CONFIG_CMD_ELF
+# define CONFIG_ELF_SIMPLE_LOAD
+# define CONFIG_CMD_REGINFO
+# define CONFIG_CMD_STRINGS
+# if defined(__ADSPBF51x__) || defined(__ADSPBF52x__) || defined(__ADSPBF54x__)
+#  define CONFIG_CMD_OTP
+# endif
+#endif
+
+/*
+ * Console Settings
+ */
+#define CONFIG_SYS_LONGHELP	1
+#define CONFIG_CMDLINE_EDITING	1
+#define CONFIG_AUTO_COMPLETE	1
+#define CONFIG_LOADS_ECHO	1
+#define CONFIG_JTAG_CONSOLE
+#ifndef CONFIG_BAUDRATE
+# define CONFIG_BAUDRATE	57600
+#endif
+
+/*
+ * Debug Settings
+ */
+#define CONFIG_ENV_OVERWRITE	1
+#define CONFIG_DEBUG_DUMP	1
+#define CONFIG_DEBUG_DUMP_SYMS	1
+#define CONFIG_PANIC_HANG	1
+
+/*
+ * Env Settings
+ */
+#if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_UART)
+# define CONFIG_BOOTDELAY	-1
+#else
+# define CONFIG_BOOTDELAY	5
+#endif
+#define CONFIG_BOOTCOMMAND	"run ramboot"
+#ifdef CONFIG_VIDEO
+# define CONFIG_BOOTARGS_VIDEO "console=tty0 "
+#else
+# define CONFIG_BOOTARGS_VIDEO ""
+#endif
+#define CONFIG_BOOTARGS	\
+	"root=/dev/mtdblock0 rw " \
+	"clkin_hz=" MK_STR(CONFIG_CLKIN_HZ) " " \
+	"earlyprintk=" \
+		"serial," \
+		"uart" MK_STR(CONFIG_UART_CONSOLE) "," \
+		MK_STR(CONFIG_BAUDRATE) " " \
+	CONFIG_BOOTARGS_VIDEO \
+	"console=ttyBF0," MK_STR(CONFIG_BAUDRATE)
+
+#if defined(CONFIG_CMD_NET)
+# if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_BYPASS)
+#  define UBOOT_ENV_FILE "u-boot.bin"
+# else
+#  define UBOOT_ENV_FILE "u-boot.ldr"
+# endif
+# if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_SPI_MASTER)
+#  ifdef CONFIG_SPI
+#   define UBOOT_ENV_UPDATE \
+		"eeprom write $(loadaddr) 0x0 $(filesize)"
+#  else
+#   define UBOOT_ENV_UPDATE \
+		"sf probe " MK_STR(BFIN_BOOT_SPI_SSEL) ";" \
+		"sf erase 0 0x40000;" \
+		"sf write $(loadaddr) 0 $(filesize)"
+#  endif
+# elif (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_NAND)
+#  define UBOOT_ENV_UPDATE \
+		"nand unlock 0 0x40000;" \
+		"nand erase 0 0x40000;" \
+		"nand write $(loadaddr) 0 0x40000"
+# else
+#  define UBOOT_ENV_UPDATE \
+		"protect off 0x20000000 0x2003FFFF;" \
+		"erase 0x20000000 0x2003FFFF;" \
+		"cp.b $(loadaddr) 0x20000000 $(filesize)"
+# endif
+# define NETWORK_ENV_SETTINGS \
+	"ubootfile=" UBOOT_ENV_FILE "\0" \
+	"update=" \
+		"tftp $(loadaddr) $(ubootfile);" \
+		UBOOT_ENV_UPDATE \
+		"\0" \
+	"addip=set bootargs $(bootargs) " \
+		"ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):" \
+		   "$(hostname):eth0:off" \
+		"\0" \
+	"ramargs=set bootargs " CONFIG_BOOTARGS "\0" \
+	"ramboot=" \
+		"tftp $(loadaddr) uImage;" \
+		"run ramargs;" \
+		"run addip;" \
+		"bootm" \
+		"\0" \
+	"nfsargs=set bootargs " \
+		"root=/dev/nfs rw " \
+		"nfsroot=$(serverip):$(rootpath),tcp,nfsvers=3" \
+		"\0" \
+	"nfsboot=" \
+		"tftp $(loadaddr) vmImage;" \
+		"run nfsargs;" \
+		"run addip;" \
+		"bootm" \
+		"\0"
+#else
+# define NETWORK_ENV_SETTINGS
+#endif
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	NETWORK_ENV_SETTINGS \
+	"flashboot=bootm 0x20100000\0"
+
+/*
+ * Network Settings
+ */
+#ifdef CONFIG_CMD_NET
+# define CONFIG_IPADDR		192.168.0.15
+# define CONFIG_NETMASK		255.255.255.0
+# define CONFIG_GATEWAYIP	192.168.0.1
+# define CONFIG_SERVERIP	192.168.0.2
+# define CONFIG_ROOTPATH	/romfs
+# ifdef CONFIG_CMD_DHCP
+#  ifndef CONFIG_SYS_AUTOLOAD
+#   define CONFIG_SYS_AUTOLOAD "no"
+#  endif
+# endif
+# define CONFIG_NET_RETRY_COUNT 20
+#endif
+
+#endif
diff --git a/lib_blackfin/board.c b/lib_blackfin/board.c
index 537f69a..49465d2 100644
--- a/lib_blackfin/board.c
+++ b/lib_blackfin/board.c
@@ -291,6 +291,25 @@ void board_init_f(ulong bootflag)
 	board_init_r((gd_t *) gd, 0x20000010);
 }
 
+static void board_net_init_r(bd_t *bd)
+{
+#ifdef CONFIG_CMD_NET
+	uchar enetaddr[6];
+	char *s;
+
+	if ((s = getenv("bootfile")) != NULL)
+		copy_filename(BootFile, s, sizeof(BootFile));
+
+	bd->bi_ip_addr = getenv_IPaddr("ipaddr");
+
+	printf("Net:   ");
+	eth_initialize(gd->bd);
+
+	eth_getenv_enetaddr("ethaddr", enetaddr);
+	printf("MAC:   %pM\n", enetaddr);
+#endif
+}
+
 void board_init_r(gd_t * id, ulong dest_addr)
 {
 	extern void malloc_bin_reloc(void);
@@ -308,8 +327,8 @@ void board_init_r(gd_t * id, ulong dest_addr)
 #if	!defined(CONFIG_SYS_NO_FLASH)
 	/* Initialize the flash and protect u-boot by default */
 	extern flash_info_t flash_info[];
-	ulong size = flash_init();
 	puts("Flash: ");
+	ulong size = flash_init();
 	print_size(size, "\n");
 	flash_protect(FLAG_PROTECT_SET, CONFIG_SYS_FLASH_BASE,
 		CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN - 1,
@@ -349,22 +368,13 @@ void board_init_r(gd_t * id, ulong dest_addr)
 	/* Initialize from environment */
 	if ((s = getenv("loadaddr")) != NULL)
 		load_addr = simple_strtoul(s, NULL, 16);
-#ifdef CONFIG_CMD_NET
-	if ((s = getenv("bootfile")) != NULL)
-		copy_filename(BootFile, s, sizeof(BootFile));
-#endif
 
 #if defined(CONFIG_MISC_INIT_R)
 	/* miscellaneous platform dependent initialisations */
 	misc_init_r();
 #endif
 
-#ifdef CONFIG_CMD_NET
-	/* IP Address */
-	bd->bi_ip_addr = getenv_IPaddr("ipaddr");
-	printf("Net:   ");
-	eth_initialize(gd->bd);
-#endif
+	board_net_init_r(bd);
 
 	display_global_data();
 
diff --git a/lib_blackfin/cache.c b/lib_blackfin/cache.c
index 1557864..0a321a4 100644
--- a/lib_blackfin/cache.c
+++ b/lib_blackfin/cache.c
@@ -36,6 +36,44 @@ void flush_cache(unsigned long addr, unsigned long size)
 		blackfin_dcache_flush_range(start_addr, end_addr);
 }
 
+#ifdef CONFIG_DCACHE_WB
+static void flushinv_all_dcache(void)
+{
+	u32 way, bank, subbank, set;
+	u32 status, addr;
+	u32 dmem_ctl = bfin_read_DMEM_CONTROL();
+
+	for (bank = 0; bank < 2; ++bank) {
+		if (!(dmem_ctl & (1 << (DMC1_P - bank))))
+			continue;
+
+		for (way = 0; way < 2; ++way)
+			for (subbank = 0; subbank < 4; ++subbank)
+				for (set = 0; set < 64; ++set) {
+
+					bfin_write_DTEST_COMMAND(
+						way << 26 |
+						bank << 23 |
+						subbank << 16 |
+						set << 5
+					);
+					CSYNC();
+					status = bfin_read_DTEST_DATA0();
+
+					/* only worry about valid/dirty entries */
+					if ((status & 0x3) != 0x3)
+						continue;
+
+					/* construct the address using the tag */
+					addr = (status & 0xFFFFC800) | (subbank << 12) | (set << 5);
+
+					/* flush it */
+					__asm__ __volatile__("FLUSHINV[%0];" : : "a"(addr));
+				}
+	}
+}
+#endif
+
 void icache_enable(void)
 {
 	bfin_write_IMEM_CONTROL(IMC | ENICPLB);
@@ -61,6 +99,10 @@ void dcache_enable(void)
 
 void dcache_disable(void)
 {
+#ifdef CONFIG_DCACHE_WB
+	bfin_write_DMEM_CONTROL(bfin_read_DMEM_CONTROL() & ~(ENDCPLB));
+	flushinv_all_dcache();
+#endif
 	bfin_write_DMEM_CONTROL(0);
 	SSYNC();
 }