1. 03 Apr, 2019 3 commits
  2. 23 Nov, 2018 1 commit
  3. 31 Oct, 2018 1 commit
  4. 11 Oct, 2018 1 commit
  5. 20 Sep, 2018 1 commit
    • IGEP0046DL/Q Boot Algorithm: · e202c713
      Jose Miquel Sanabria authored
      Added video args for kernel support when trying to use a display
      Changed a bit the boot algorith so that bootdir is by default empty and mmcpart is by default 1
      this will change when booting a firmware because uEnv.txt is now responsible for indicating that zimage
      and dtb are in p2 (mmcpart=2) of folder /boot/ (bootdir)
      Signed-off-by: Jose Miquel Sanabria's avatarJose Miguel Sanchez Sanabria <jsanabria@iseebcn.com>
  6. 24 Jul, 2018 1 commit
  7. 23 Jul, 2018 2 commits
  8. 16 Jul, 2018 1 commit
  9. 06 Jul, 2018 1 commit
  10. 05 Jul, 2018 1 commit
  11. 28 Jun, 2018 1 commit
  12. 19 Jun, 2018 1 commit
  13. 12 Jun, 2018 2 commits
  14. 24 May, 2018 1 commit
  15. 09 May, 2018 1 commit
  16. 15 Feb, 2018 1 commit
  17. 07 Feb, 2018 1 commit
  18. 05 Feb, 2018 1 commit
  19. 26 Jan, 2018 4 commits
  20. 23 Jan, 2018 2 commits
  21. 15 Jan, 2018 1 commit
  22. 12 Jan, 2018 1 commit
  23. 14 Sep, 2017 1 commit
  24. 07 Sep, 2017 1 commit
    • MA-9554[Android_6DL_SD]RTC: Sometimes the RTC reset to the initial time 1970… · c250b072
      Zhang Bo authored
      MA-9554[Android_6DL_SD]RTC: Sometimes the RTC reset to the initial time 1970 after softare reboot the first time. 40%
      RTC timer is default disabled after power off and bootup again. it will be
      enabled in kernel rtc driver init. But rtc time is shorter than system clock,
      so rtc time cannot update to system clock in rtc_hctosys(), and the sysfs
      file /sys/class/rtc/rtc0/hctosys cat result is 0. Android AlarmManagerService
      cannot work normally when hctosys is 0.
      Enable RTC in u-boot so the time in RTC timer is longer than system clock.
      Change-Id: Ie8b1c1b36e5ab48031efe44dd06468ac35ca3d3b
      Signed-off-by: 's avatarZhang Bo <bo.zhang@nxp.com>
  25. 25 Jul, 2017 1 commit
    • MLK-16069 imx6slevk: Workaround to limit the u-boot in low 512MB memory · 92216844
      Ye Li authored
      On i.MX6SLEVK board, the LPDDR2 chip(CS1) is not reset before accessing.
      And due to MMDC limitation, the script we get from IC team is only doing
      CS0 reset but skipping CS1 reset, the reason is that doing CS1 reset might
      cause CS0 can NOT be accessed any longer.
      Because of this HW issue, we found the high 512MB memory needs more time to
      be stable. Since the u-boot relocates itself to highest address after booting,
      so this will cause issue.
      To work around it, we just limit the u-boot running at low 512MB memory.
      Signed-off-by: 's avatarYe Li <ye.li@nxp.com>
      (cherry picked from commit 5fc93379)
  26. 19 Jul, 2017 1 commit
  27. 12 Jul, 2017 1 commit
    • MLK-15341 mx6qpsabresd: add PHY AR8031 hw reset · 721193c1
      Fugang Duan authored
      Currently mx6qpsabresd board file only add PHY AR8031 gpio reset
      in non-DM driver, then net DM driver PHY cannot work after stress
      reboot test. So also add gpio reset for DM driver.
      RGMII and PHY work at VDDIO 1.8V has better timing and to align
      the IO voltage with kernel, also set the IO voltage to 1.8V.
      Since i.MX6QP tx_clk can loop from SOC internal, no need to set
      PHY output 125Mhz clock that can save power.
      Signed-off-by: 's avatarFugang Duan <fugang.duan@nxp.com>
      Reviewed-by: 's avatarYe Li <ye.li@nxp.com>
  28. 11 Jul, 2017 1 commit
  29. 10 Jul, 2017 4 commits
    • MA-9857 [Android] uboot change CONFIG_NAND_BOOT · 37116ed5
      zhang sanshan authored
      NAND macro has been changed to CONFIG_NAND_BOOT in uboot2017.
      Change-Id: I61dd03c0eed8a65100212607447a41bde431cc04
      Signed-off-by: 's avatarzhang sanshan <sanshan.zhang@nxp.com>
    • MA-9789 [fastboot]System doesn't enter fastboot mode automatically while there… · 259db9dc
      zhang sanshan authored
      MA-9789 [fastboot]System doesn't enter fastboot mode automatically while there is no valid gpt partition
      add command "fastboot 0"
      Change-Id: Ibad6dcab5213d815ac968034aeef5ff5a0be3b1b
      Signed-off-by: 's avatarzhang sanshan <sanshan.zhang@nxp.com>
    • MA-9409-3 Add base board support for android and android things. · 2c119607
      zhang sanshan authored
      * add board support for android and android things.
        mx6ul_nxpu_iopb, pico-6ul, pico-imx7d, aquila-6ul
        reorganize the Kconfig, and fix the redefine issue.
      * add android configure into configure-while
      * add a common file mx_android_common.h
        it will be included by android and android things.
        defconfig only include ANDROID_THINGS_SUPPORT or ANDROID_SUPPORT
      * move partition_table_valid into f_fastboot.c.
        it's a common code.
      * add invalidate_dcache_range in fixed order.
        It will have salt invalid issue if we do not add it in order
      * add display for pico-7d.
      Change-Id: I6f8a4876c2f8bbd098034d1e3f53033109300bca
      Signed-off-by: 's avatarzhang sanshan <sanshan.zhang@nxp.com>
    • MA-9409-2 fix some issue for android and android things · ff92794f
      zhang sanshan authored
      * Add CONFIG_SYSTEM_RAMDISK_SUPPORT to support system's ramdisk
      * Normal boot: cmdline to bypass ramdisk in boot.img,
        but use Recovery boot: Use the ramdisk in boot.img
      * commandline is larger than 512, system can't bootup sometime for commandline issue.
      * support fastboot getvar.
      * Support "fastboot erase" command for emmc device.
        TODO: uboot community have api to operate flash, we can unify this part
      * support "fastboot flash" even on damaged gpt
      Change-Id: I080c25d6569d6cab56ff025601cd3b8df21cf3dd